Return
to Menu
M7208
Telephone
User Card
Making calls
Norstar systems can have different types of line buttons. Match the line
buttons on your telephone with the ones below for instructions on how to use
them.
About line buttons
Intercom
Line 1
Internal calls using Intercom buttons
1. Pick up the receiver.
2. If appears beside an Intercom
button, then dial.
External calls using numbered Line
buttons
1. Pick up the receiver.
2. When appears beside a
numbered Line button, then dial.
OR
OR
Press an Intercom button without
, then dial.
Press a numbered Line button
without , then dial.
Note: Internal numbers are supplied by your System Coordinator.
External calls using extension
Internal calls using extension
buttons
4321
buttons
1. Pick up the receiver.
2. When appears beside the
1. Pick up the receiver.
2. When appears beside an
extension button, then dial.
9
extension button, dial
(or your system's external line
access code) and the number.
Hold
Holding Calls
1. Press
Hold
. The flashes beside the line on hold.
2. Press the line button with the flashing to return to the call.
Check the display for confirmation or additional information.
Automatic hold
Calls are put on hold automatically when you switch from one line to another.
Handsfree
Mute
This button operates the telephone's built-in microphone and speaker in place
of the receiver. Your System Coordinator can program Handsfree to your
telephone.
Making calls
1. Press
Handsfree
instead of picking up the receiver.
Mute
Switching between Handsfree and handset
Handsfree
1. Press
and replace the handset to switch to Handsfree.
Mute
2. Pick up the receiver to switch back.
Using Mute
1. Press
2. Press
Handsfree
to turn the microphone OFF.
again to turn the microphone ON.
Mute
Handsfree
Mute
1. Pressaline buttonwithout , then dial your call.
2. When answered, pick up the receiver, or press
3. If the call is not answered, or the line is busy, press
Dialing without
lifting the handset
Handsfree
Mute
.
Rls
.
3
Programming memory buttons
Memory buttons are the buttons
with indicators other than line or
Handsfree buttons. Memory
buttons store telephone numbers
or feature codes to give you one
touch dialing or feature activation.
You can change what a memory
button does by just programming
it with a new number or feature.
You cannot program a line or
Handsfree button.
About memory
buttons
Feature
0
Remember: Press
to check a memory or line button.
Programming
memory buttons
External autodial
Hold
1. If you are on a call or an open line with dial tone, press
Rls
or
.
Feature
1
2. Press
.
3. Press a memory button.
4. Dial the external number.
Hold
5. Press
to store the number.
6. Label your new button.
Internal autodial
Hold
1. If you are on a call or an open line with dial tone, press
Rls
or
.
Feature
2
2. Press
.
3. Press a memory button.
4. Dial the internal number.
5. Label your new button.
Features
Hold
1. If you are on a call or an open line with dial tone, press
Rls
or
.
Feature
3
2. Press
.
3. Press a memory button.
Feature
4. Press
and the feature code.
5. Label your new button.
Erasing memory buttons
Hold
1. If you are on a call or an open line with dial tone, press
Rls
or
.
Feature
1
2. Press
.
3. Press the memory button you want to erase.
Hold
4. Press
to erase the button.
P0749848 Issue 02 Printed in Canada
4
|