Metz MF 72TK80 MF 72TK81 MF 72TK86 MF 82TK96 MF 82TK97 MF 84TK89 User Manual

Operating instruction

Spectral-72

Astral-72

72TK80

72TK81

72TK86

82TK96

82TK97

84TK89

Corum-72

Spectral-82

Astral-82

Spectral-84

603 47 2021.A2

1. Installation

• Take care that no bright artificial light or sunshi-

ne falls directly on the screen. This could cause

reflections which have a negative effect on the

brilliance of the picture.

5x cm

• The optimum viewing distance is about

five times the screen diagonal dimen-

sion. For TV sets with a 70 cm screen, it

is thus about 3.5 metres.

• The antenna cable and any other components

(such as a video recorder) connected between

the antenna socket in the wall and the TV set

must comply with the European standard EN

60966-2-4.

• There may be no magnetic fields in the immedi-

ate vicinity of the TV set. Keep loudspeaker

boxes well away from the set.

• The antenna cable used for connecting the TV

set must have a screening attenuation of at least

75 dB.

• The use of non-approved cables will invalidate

the operating permission for the TV set.

• For details of how to connect peripheral devices

such as video recorders, DVD players, etc. press

the „INFO“ key to call the help function, select

„Connecting AV devices“ with the cursor and

press „OK“ to display the information.

2. Safety notes

• Always place the monitor on a solid, stable sur-

face.

• If a cold TV set is moved to a warm room,

always allow any condensation on the screen to

evaporate before switching it on.

• The TV set is intended for use in a dry room. If,

in exceptional circumstances, you use it out-

doors, take care that is protected against moi-

sture (rain, splashed water, dew).

• TV sets need adequate ventilation. Never cover

the openings on the rear of the set with curtains,

doilies, newspapers, etc. Also take care that the

slits in the bottom of the case are freely accessi-

ble so that the intake of the cooling air is not

hindered.

• If you place the TV set in a wall unit,

leave sufficient space on all sides for the

circulation of cooling air.

• Do not place the TV set close to a radia-

tor, since this would effect adequate

cooling.

• Do not place

burning candles or

vessels containing liquids (vases, etc.)

on top of the TV set, since any hot wax or water

dripping into the set could cause serious damage

to the electronic components and could also jeo-

pardize the electrical safety of the set.

• Lightning can damage electrical equipment. A

lightning flash entering the power cable or the

aerial cable can damage the TV set even if it is

2. Safety notes

switched off. You should therefore disconnect

the power cable and aerial cable from their out-

lets or from the TV set in the case of a thunder-

storm.

• The monitor may be opened and repaired only

by a qualified person.

CAUTION! HIGH VOLTAGES CAN KILL!

If repairs should be necessary, consult your

local dealer.

• Always switch off the TV set before cleaning it.

• Do not hold the remote control directly in front

of your eyes and press a button. The remote

control emits infrared radiation!

• Do not place rechargeable batteries in the bat-

tery compartment of the remote control.

Use only two 1.5 V dry batteries of the type

LR03/AM4/AAA (Micro).

• The TV set is intended only for the reception and

reproduction of picture and sound signals.

• The TV set may be operated only

from a mains voltage of 230 VAC,

50/60 Hz.

240 VAC in Australia only

• Lay the power cable so that nothing

stands on it and no-one can trip

over it.

3. Remote control unit

The Metz remote control unit RG 12 can

be used to remotely control all Metz TV

sets with the type designation "TH" (see

the Operating Instructions of the TV set

or look at the label on the back of the

set) or later models (such as TK, TL, ...)

as well as video recorders VCR1 and

VCR 2, DVD players and HiFi equip-

ment (such as radios, cassette players,

CD players, amplifiers, etc.) made by

Metz or various other manufacturers.

ቶ

ት

ባ

ቤ

The remote control unit transmits com-

mands to the TV set with the aid of infra-

red light. You should always point the

remote control unit directly at the TV set.

The remote control unit may possibly inter-

fere with other infrared devices (such as

infrared headphones) within its range.

ᕤ

ቴ

ታ

ᕥ

Sunlight falling directly on the TV

set may interfere with the operation

of the remote control unit, because

the TV set cannot detect the infra-

red signals from it. The TV set must

first be switched on with the main

switch before the remote control

unit can be used.

ꢀ

ቧ

ቨ

ቱ

ᕨ

The remote control unit is programmed

as follows before it leaves the factory:

ቯ

ቮ

ቭ

• TV

Metz TV sets with the type designation "TH"

ቪ

ቫ

• VCR1 Metz video recorders with remote

control unit RH51

• VCR2 Metz video recorders with remote

control unit RF52

• DVD Metz DVD players with remote

control unit RG/RH374

• HiFi Metz HiFi CD receiver HE 11 with remote

control unit F11

Never load rechargeable batteries

into the battery compartment of the

remote control unit!

Only use two 1.5V LR03/AM4 batte-

ries, size AAA.

3. Remote control unit

In the „Information“: return to the con-

tents

The most important keys in

normal use

ቯFrame freeze

³ ON:

Delete key in the menus

the last station watched before the set

was switched off is selected.

OFF (standby)

ƹReturn to previously selected pro-

gramme position

In the TV menu: call „Configuration“

ᕤ Numeric keys (direct station selection)

ቱDisplay date and time

ᕥ P+ / P-: next/previous programme

In the TV menu: call „Timer“

position

ƻ In the TV menu: call the „Station

ᕨ Volume control

Also used to change settings in the

table“ or display station attributes

ታCall the sound settings

In the TV menu: call „AV devices“

ƹ Return to previously selected pro-

gramme position

ቴCall the picture settings

In the TV menu: call „Picture and

sound“

ƻ Display the station table

ት Return to the TV picture

Overview of key functions

Switch from satellite radio mode¹⁾to

TV mode Switch on from

ባ Switch to satellite radio mode

standby mode to TV mode (¹⁾only if a

SAT upgrade module is fitted)

Switch on from standby mode to

satellite radio mode

(¹⁾only if a SAT upgrade module is

fitted)

ቶ Call the AV menu for playback and

recording

Switch on from standby mode to AV

mode

ቤ Function keys F1 ... F3

ቧCursor control key in the "Informa-

Select key - used for switching the

operating level to AV devices

tion" and in the menus

ቨOK - confirmation key

ᕨChange settings in the TV menu

ቪSound mute

EPG (Electronic Program Guide)

= open NexTView

ቫCall the TV menu

In the menu: return to the previous

main menu item

ቭCall Teletext

ቮCall the „Information“

3. Remote control unit

ce. If the code does not exist in the

table, the LED lights for about two

seconds.

1. Programming the remote con-

trol unit for control of your

equipment

In order to remotely control your consumer

electronics equipment, you must program-

me each of the various levels of the remote

control unit with a 3-digit code.

1.2 Programming the codes for

CD Player, Tuner and Tape

When you select the steps a)...c) ,you

ꢀ

have about 15 seconds to continue

with the next step. If you do not do so

within this time, the unit automatically

returns to the TV level.

• TV (TV-Gerät)

The TV level is already programmed

for Metz TV sets with the type designa-

tion "TH". This programming cannot

be changed.

• VCR 1 (Video recorder 1)

VCR 2 (Video recorder 2)

a) Use the Select key to select the HiFi

level. The coloured LED HiFi lights.

b) Press the key

press the key: ...

, release it and then

DVD-Player

...F1 for CD player

...F2 for Tuner (radio)

...F3 for Tape (cassette recorders)

der Fernbedienung drücken, bis die

until the LED blinks once.

HiFi (e.g. amplifier, tuner, tape, etc.)

The remote control unit must be pro-

grammed with a code from the code

list for each level you want to use.

Note the factory settings (Page 6)

and the list of available codes at the

end of these Operating Instructions.

ꢀ

c) Enter the desired code (see the code

list) with the numeric keys. If this code

is accepted, the LED again blinks twi-

ce. If the code does not exist in the

table, the LED lights for about two

seconds.

1.1 Programming the codes for

VCR and DVD

When you select the steps a)...c) ,you

ꢀ

1.3 Programming the code for

HiFi amplifier

have about 15 seconds to continue

with the next step. If you do not do so

within this time, the unit automatically

returns to the TV level

When you select the steps a)...d) ,you

have about 15 seconds to continue

with the next step. If you do not do so

within this time, the unit automatically

returns to the TV level.

ꢀ

a) Use the Select key to select the desired

level. The coloured LED for the cur-

rently selected level lights.

b) Press the keys

and F1 together and

a) Use the Select key to select the HiFi

level. The coloured LED HiFi lights.

hold them until the LED blinks twice.

c) Enter the desired code (see the code

list) with the numeric keys. If this code

is accepted, the LED again blinks twi-

b) Press the key

, release it and then

press and hold the F3 key until the

LED blinks twice.

3. Remote control unit

c) Press the F1 key: the LED blinks once.

programmed for a level, first select the

level as described in section 1.1, steps

a) and b).

d) Enter the desired code (see the code

list) with the numeric keys. If this code

is accepted, the LED again blinks twi-

ce. If the code does not exist in the

table, the LED lights for about two

seconds.

ᕌᕌᕄ

b) Enter

on the numeric keys. The

LED blinks twice to acknowledge your

input.

ᕃ

c) Press numeric key

(for the first digit

of the code). The LED now blinks the

number of times corresponding to the

programmed digit (if, for example, the

LED blinks three times, the digit 3 is

programmed).

1.4 Station search

Follow the instructions for programming

the code for VCR, DVD, CD, tuner, tape

as far as the step where the code num-

ber is entered. Then enter the three-digit

code number "001" for the station

search. The LED blinks twice to acknow-

ledge the input. Then press and hold the

"Station-search" key (which depends on

the operating level; see the table on

pages 10 and 11) until the device stops

or is switched off (a STOP or OFF com-

mand is issued automatically every 1.5

seconds).

ᕄ

d) Press numeric key

(for the second

digit of the code). The LED now blinks

the number of times corresponding to

the programmed digit (if, for exam-

ple, the LED does not blink, the digit 0

is programmed).

ᕅ

e) Press numeric key

(for the third

digit of the code). The LED now blinks

the number of times corresponding to

the programmed digit (if, for example,

the LED blinks seven times, the digit 7

is programmed).

Release the "Station search" key and

press the "Select" key to confirm that you

want to execute a station search (the

code which was found is saved).

After completion of the station search, or

when all code numbers have been inter-

rogated, the corresponding LED blinks

five times.

In this example, the currently programm-

ᕅ ᕌ ꢀ

ed code is thus

If you lose count while reading out the

code, simply start again at step 2c).

2. Determining which code is

already programmed (read-

out mode)

When you select the steps a)...e) ,you

have about 15 seconds to continue

with the next step. If you do not do so

within this time, the unit automatically

returns to the TV level.

ꢀ

a) In order to determine which code is

3. Remote control unit

Key

V C R 1 / 2

ባ

On / Standby

ቶ

ት

Record

ቤ

F 1

F 2

F 3

Time in display

ባ

ቤ

ቧ

ቨ

ቪ

ቫ

ቭ

ቮ

ቯ

ቱ

ታ

ቴ

ት

ቶ

0...9 Numeric keys:programme selection

P +/–

< >

Programme +/–

Fast forward/Rewind

Vol.+/–

Mute

Text

TV volume +/–

Mute TV

ᕤ

Info

TV-set INFO*

Pause

ቴ

ታ

ᕥ

I I

red

STOP / Statiom search

PLAY

green

white

yellow

blue

ቧ

ቨ

Slow-motion

ቱ

ᕨ

AV input

Select

Select operating

ቯ

ቮ

ቭ

EPG Switching voltage on/off**

In preparation: If the TV set is switched on,

the current operating level is indicated.

** AV-Link with Panasonic VCR

ቪ

ቫ

Note:

The assignments of the operating levels to the

device functions apply only for the AV devices

preset in the factory. If other AV devices in accor-

dance with the code table are used, some of

these assignments may differ or be restricted.

Station search:

Programme the code for VCR, DVD, CD, tuner or

tape and execute the steps up to the input of the

code number. Then enter "001" as the 3-digit

code for station search. The LED blinks twice to

acknowledge this input. Then press and hold the

3. Remote control unit

H i F i

Key

D V D

C D ( F 1)

T U N E R ( F 2 )

T A P E ( F 3 )

ON: display time/track

ON + AV, ON: on/standby ON + AV, ON: on/standby

ON: radiotext on/off

ባ

On / Standby

Return

Angle

ቤ

F 1

F 2

F 3

F1 & ON: CD

ቤ

Audio

Subtitle

F2 & ON: tuner

F2 & ON: Tuner

ቤ

F3 & ON: tape-input

F3 & ON: tape input

ቧ

ቨ

ቪ

ቫ

ቭ

ቮ

ቯ

ቱ

ታ

ቴ

ት

ቶ

0...9 Numeric keys: title selection Num.Keys: title selection N.Keys: programme selection

P +/–

< >

Cursor up / down

Cursor left/right

OK / Enter

TV volume +/–

Mute TV

Titel +/–

Programme +/–

Frequency +/–

Vol.+/–

Mute

Text

AMP volume +/–

Display

Info

TV set INFO*

Pause

TV set INFO*

PAUSE

TV set INFO*

Station search

I I

red

STOP / Station search

PLAY

STOP / OPEN-CLOSE / Station search num. key ባ=Station search

green

white

yellow

blue

PLAY

EJECT

Skip +

Skip –

Repeat

Select operating level

Title

AUX Input

AUX input

Select

EPG

Select operating level Select operating level Select operating level

"Station search" key (depending on the operating level: see the

table) until the device stops running or switches off (an OFF or

STOP command is automatically transmitted every 1.5

seconds). Release the "Station search" key and start the search

with the "Select" key (the code you entered is saved). When the

station search has been completed or all code numbers have

been interrogated, the corresponding LED blinks five times.

Reset:

Programme the code for VCR, DVD, CD, tuner or tape and

execute the steps up to the input of the code number. Then enter

"000" as the 3-digit code for "Reset". The LED blinks twice to

acknowledge this input. This resets all codes to the factory set-

tings.

The reset is executed for all operating levels, regardless of the

operating level from which it is executed.

Call the menu

4. General operating notes

When designing this TV set, we have tried to

make its operation as easy as possible so that

you will enjoy learning how to use it.

The TV set itself can provide the answers, with the

menu „Information“, to any questions you may

have during installation and switching on.

To use this function, simply press the „INFO“ key

to display the table of contents of the

INFO

„Information“ on the screen.

The menu „Information“ (help function)

In the table of contents, or in the index, you

can then select the information you need

with the cursor control key.

Information

Contents (1/2)

Index

„Cursor right“ ̈: move to next page of the

index.

„Cursor left“ ̇: scroll backwards through

the index.

„Cursor up“ ̆: select the previous underli-

ned text or the arrow -->.

Programme selection

Picture settings

Sound settings

AV playback / recording / satellite recording

Teletext

Function key

Satellite radio mode

-->

Use the cursor to select an underlined text.

„Cursor down“ ̄: select a line in the list.

Then press the „OK“ key to display this

information.

OK: further information

INFO: help index

Previously visited pages: © backwards © forwards

You can select any underlined words in the table

of contents, the index or the explanatory text with

the cursor and press „OK“ in order to display

further information about them.

You can scroll back and forth through previously

selected help pages with the aid of the red and

green keys.

4. General operating notes

Using the menus

Call the menu

With the „TV menu“, we help you to find your

way through the many operating functions of

your TV set.

Do not hesitate to try out the options in the

various menus. Any changes you make become

permanently effective only if you save them by

pressing the „OK“ key. If you are not sure that

you want to retain a new setting, you

Main menu items

can simply exit from the menu by pres-

ꢀ

sing the „TV“ key. The new setting is

then discarded.

Picture-Volume

AV devices

Station table

Timer

While you are in the TV menu, you can

return to the main menu item at any time

by pressing the „MENU“ key. If you do

not understand a menu item, press the

„INFO“ key for more information.

To return to the menu, press the „INFO“

key twice.

Configuration

Coloured keys:

call menü

TV: return to TV

picture

The five main sections of the menu can be opened

with the coloured keys. The help information is

shown in the form of two card files containing the

subjects (blue) and the sections of the selected

subject (yellow). You can select the subjects and

sections with the aid of the red triangular cursor,

which is moved with the oval key.

Subjects*

Sections*

Pressing the „OK“ key then moves you to

the setting window below the file boxes.

Factory settings

Rotation*

Panorama*

CTI

Noise reduction

Picture sharpness

Colour intensity

Contrast

ꢀ

The current setting is displayed here and

Picture-Volume

AV devices

Station table

Timer

you can change it with the

key.

To save the new setting, press the „OK“

key. This also returns you to the file of

yellow section cards. If you do not want

to save the new setting, press the

„MENU“ key to return to the related

main menu item or press the „TV“ key to

exit from the menu.

Sound set.prog.po

Sound settings, gen.

Pict. set.,prog. posn.

Pict. settings, gen.

Configuration

Luminance

: select,

OK: go to

settings.

These settings apply to all programme position

You can delete your input by pressing the ll key.

Cursor

Setting window

5. Daily operation

Switching on

Switch on the TV set with the main switch. The red

standby indicator lights.

Then enter the desired programme position on the

numeric keys of the remote control unit.

Alternatively, simply press the

key with the TV

set in standby mode to select the programme

position you were watching before the set was

switched off.

If you have defined an initial programme position

(see page 66), pressing the

key with the TV

set in standby mode will select this programme

position.

Switching off

Press the

key to switch the TV set to standby

mode or press the main switch on the TV set to

switch it off completely.

Station selection

You can select a station (programme position) with

the numeric keys, with the rocker key „P+/P-“ or from

the station table.

To call the station table, press the white key

. Use

the cursor control key to select the desired station and

then press the „OK“ key to confirm your selection.

Adjusting the volume

You can adjust the volume with the

key.

Adjusting picture and sound settings

Call the picture settings with the blue key

the sound settings with the yellow key

At the bottom left of the screen, you will then see

the setting box with the various functions. Select

the desired function with the rocker key „P+/P-“

and adjust the setting with the

key.

5.1 Setting the operating mode

Call the menu

The TV set can be switched on at the desired ope-

rating level with the keys "TV", "AV" and "R".

These keys can also be used to switch between the

operating levels.

When the TV set is switched on with one of these

keys, the station which was last selected at this

operating level is again set.

TV = television mode

AV = audio-visual mode for use with AV devices

R = radio mode ¹⁾

(¹⁾available only if a SAT receiver is installed)

5.2 Operating scope

Call the menu

Until we introduce Version 2.1 of the software, this

menu item is available only in the service menu. If

you wish to reduce the operating scope of your TV

set, please consult your local Metz dealer.

The operating scope of the TV set is indicated by

asterisks in the menus and can be reduced in two

stages in order to prevent inadvertent changing of

certain settings.

Programming the operating scope

(Software version V2.1 or higher)

• Press the "MENU" key to open the TV

menu.

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Scope of operation

EPG settings

Automatic zoom

Sound settings

HiFi output

Init. prog. position

Display configuration

• Press the red key

"Configuration".

• Use the cursor control key to select

"Operation".

• Press the "OK" key and then use the

cursor control key to select "Opera-

ting".

to open the menu

Picture-Volume

AV devices

Station table

Timer

Configuration

Language*

: select,

OK: go to

settings.

Scope of operation

full

ꢀ

•

Press the "OK" key and then, in the setting

window, select the desired operating scope

with the

key.

5.2 Operating scope

ꢁ ꢁ ꢁ The full TV menu is displayed

ꢁ ꢁ A reduced TV menu is displayed. The follo-

wing functions are no longer available:

- Special picture settings such as panorama, CTI,

noise reduction, picture sharpness, etc.

- Special sound settings such as stereo wide, spati-

al sound, balance, tone settings, etc.

- Picture and sound settings for individual pro-

gramme positions.

- Programming of the function keys.

- Settings for the EURO sockets.

- Special functions in the menu "Operation".

ꢁ The TV menu cannot be opened, Only the stan-

dard functions of the remote control are availa-

ble.

• Save the changed setting by pressing the "OK"

key.

If you want to open a menu although only the ope-

rating scope with one asterisk is active, then:

• Press and hold the "MENU" key for at least five

seconds to open the TV menu.

• The menu item "Operation" is automatically

selected.

• Use the

key to select the desired operating

scope and press the "OK" key to save the chan-

ged setting.

6. Setting the language and country

Call the menu

In a menu with two asterisks (**), the set-

tings for the menu items "Language" and

"Country" cannot be changed.

ꢀ

Setting the language for the TV menu

You can select one of the available languages for

the display of the TV menu. The text in the menu

and in the help function (Information) is then

displayed in the selected language.

Setting the country

After installing the TV set, you must select the

country where it is installed. This infor-

mation is used by the TV set to make

certain basic settings (such as the chan-

nel spacing, the sorting sequence for the

stations, etc.).

Operation

Function for AV*

ꢀ

Picture-Volume

AV devices

Station table

Timer

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Nederlands

Français

Español

Italiano

English

Deutsch

Setting the language and country:

• Press the „MENU“ key to open the TV

menu.

Configuration

Language*

: select,

OK: go to

settings.

Selected language English

• Press the red key

„Configuration“.

to open the menu

• Press the „OK“ key and use the cursor

control key to set the desired language

or country.

• Press the „OK“ key to save the set-

tings.

Italien

Großbritanien

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Frankreich

Finnland

Deutschland

Dänemark

Belgien

Picture-Volume

AV devices

Station table

Timer

• Press the „TV“ key to close the menu.

Baltikum

Configuration

Language*

Australien

The menu language can also be set

in the help function (Information)

by selecting the appropriate natio-

nal flag.

ꢀ

: select,

OK: go to

settings.

Selected country Australia

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

7. Programming stations

You can programme the TV stations in three diffe-

rent ways.

a) Automatic station search

The automatic station search function searches the

entire range of reception frequencies for TV stations.

All stations which are found are placed in the

station table, which is displayed at the end of the

search operation. If you are not satisfied with the

order in which the stations are stored, you can shift

or delete stations as described in the next section.

Executing an automatic station search

• Press the „MENU“ key to call the TV

• Press the red key

to open the

„Configuration“ menu.

• Move the cursor to „Automatic station

search“.

• Press the „OK“ key several times until

the message „Searching for stations“

is displayed.

• A station table containing all stations

which are found is displayed on the

left side of the screen.

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

DataLogic

Terr. station search

Configuration

Language*

: select,

OK: go to

settings.

Station search (START)

• At the end of the search, all stations

which were found are sorted and

displayed.

• To delete any unwanted stations, select them

with the cursor and press the „II“ key.

• To save the stations, press the „OK“ key and

enter, with the numeric keys, the number of the

programme position where the first station is to

be saved. The remaining stations are saved in

the following programme positions.

b) Station search

The station search function permits you to search

for specific stations if you do not know their chan-

nel number or frequency.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

7. Programming stations

Executing a station search

Call the menu

• Press the „MENU“ key to display the TV menu.

• Press the white key

table.

to display the station

• Move the cursor to en empty programme posi-

tion (or to a position containing a station you

wish to replace with the new station).

• Move the cursor to „Frequency/Channel“.

• Press the „OK“ key.

• In the setting window which is then displayed,

move the cursor to „Search“.

• Press the

key to start the search.

• The search stops when the first station

is found.

• If you want to save this station, press

the „OK“ key.

009 MDR

Decoder

008 SW 3

007 N24

006 PRO 7

005 RTL

004 SAT 1

003 Bayern 3

002 ZDF

ꢀ

Sound correction

Colour standard*

Picture corrections*

Picture quality*

Enter Logo

Picture-Volume

AV devices

• If you do not want to save this station,

press the

search.

key again to continue the

Station table

Timer

Frequency/channel

TV-standard 2)

Configuration

: select,

OK: go to

settings.

001 ARD

c) Direct channel input

Channel

Cable channel

Frequency 182.31 MHz

Scan operation

You can programme a station directly by

entering its channel number with the

numeric keys (you must, of course, know the

channel number of the desired station).

ARD

Executing direct channel input

• Press the „MENU“ key to display the TV menu.

• Press the white key

table.

to display the station

• Move the cursor to en empty programme posi-

tion (or to a position containing a station you

wish to replace with the new station).

• Move the cursor to „Frequency/Channel“.

• Press the „OK“ key.

2) Available only on TV sets

which are equipped with this

option.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

7. Programming stations

• In the setting window which is then displayed,

move the cursor to „Channel“ or „Special chan-

nel“.

• Enter the number of the channel or special

channel with the numeric keys.

• Press the „OK“ key to save the station.

• Press the „TV“ key to close the menu.

Fine tuning

When you programme stations, each channel is

automatically tuned to the centre frequency. This

is normally sufficient. If this automatic function

does not produce satisfactory results, you can

carry out fine tuning.

Executing fine tuning

• Select the desired programme position.

• Press the „MENU“ key.

ꢀ

Picture-Volume

AV devices

• Press the white key

tion table.

to open the sta-

Station table

• Move the cursor to the subject card

„Frequency/Channel“.

• Press the „OK“ key to confirm your

selection.

Timer

Configuration

Change value with

+ and -

Confirm with OK

Channel

Cable channel

Frequency 182.31 MHz

Scan operation

• In the setting window, select „Frequen-

ARD

cy“ and use the

key to change the

frequency value until the picture is as

clear as possible.

• Save the new setting by pressing the „OK“ key.

• Press the „TV“ key to close the menu.

8. Station logo

Call the menu

Each station which transmits VPS signals also

sends a station logo with up to eight characters,

which is automatically assigned to this station in

the station list. If this automatic function does not

work correctly, or if you want a different station

logo, you can overwrite the logo manually.

Setting the station logo

• Select the desired programme position.

• Press the „MENU“ key.

• Press the white key

to open the station table.

• Move the cursor to the subject card „Logo“.

• Press the „OK“ key to confirm your selection. In

the setting window, you can now enter

the desired logo with the aid of the

009 MDR

008 SW 3

007 N24

006 PRO 7

005 RTL

004 SAT 1

003 Bayern 3

002 ZDF

ꢀ

numeric keys.

Decoder

Picture-Volume

AV devices

As long as the red cursor is selected,

you can enter the desired letters and

digits by pressing the numeric keys

(e.g. key ᕥ: J-K-L-5). If you make a

mistake, you can delete the characters

before the red cursor, one at a time,

with the red key. To delete the entire

logo, press the ll key.

Sound correction

Colour standard*

Picture corrections*

Picture quality*

Enter Logo

Station table

Timer

Configuration

: select,

001 ARD

Frequency/channel

ꢂ

. , ᕢ ABC ᕣ DEF

OK: go to

settings.

ᕤ GHI ᕥ JKL ᕦ MNO

ᕧ PQRS ᕨ TUV ᕩ WXYZ

ARD

• When you are finished, press the

„OK“ key to save the new logo.

• Press the „TV“ key to close the menu.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

9. Sorting stations

In the station table, you can shift or copy one or

more stations to other programme positions. You

can also delete any unwanted stations.

Copying, shifting and deleting stations

• Press the „MENU“ key to call the TV menu.

• Press the white key

to call the station table.

• Press the „F1“ key to enable editing of the sta-

tion table.

• Use the cursor control key to select the pro-

gramme position you want to copy, shift or

delete.

• Press the „OK“ key to mark this pro-

gramme position: the text colour chan-

ges to orange and an asterisk is

displayed after the last digit of the

009 MDR

008 SW 3

007* N24

006 PRO 7

005 RTL

004 SAT 1

003 Bayern 3

002 ZDF

ꢀ

Decoder

Picture-Volume

AV devices

Station table

Timer

Sound correction

Colour standard*

Picture corrections*

Picture quality*

Enter Logo

programme position number (in the

example on the left: position 007).

• To shift or copy this station, move the

cursor to the programme position

before or after which the selected sta-

tion(s) is/are to be inserted. If these

stations originally had a lower posi-

tion number than this position, it/they

will be inserted before this programme

position. Stations which originally had

a higher number will be inserted after

this programme position.

Configuration

001 ARD

Frequency/channel

F1: End

White: Clear all

marks

Move, copy, delete: Select one or more stationswith OK.

Move cursor to new position

+ = copy, - = move, II = delete

• Press the

key to copy (+) or shift (-) the

selected station(s).

• To delete a station, press the ll key.

• Press the „F1“ key to save the new settings

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

10. Selecting stations

Call the menu

Station selection and programme posi-

tion management

Your TV set can manage up to 999 programme

positions in the station table. You can select these

programme positions with the numeric keys, with

the oval „P+/P-“ rocker key or via the station

table.

When you enter a position number on the nume-

ric keys, the first digit you enter is the „hundreds“

digit. If there are less than 100 programme posi-

tions defined, this digit automatically moves to the

„tens“ position. If less than 10 programme posi-

tions exist, it automatically moves to the

„ones“ position.

14 MDR

13 Nord 3

12 RTL

11 SAT 1

10 Nord 3

After pressing any numeric key, you

have three seconds to enter further

digits.

SuperRTL

Kabel 1

PRO 7

Selecting programmes from the

station table

In normal TV mode, you can open the

West 3

Hessen 3

SW-BW

Bayern 3

ZDF

ARD

station table with the white key

. In

the table which is then displayed, you

can select a station with the oval „P+/P-“ rocker

key. Then press the „OK“ key to switch to this sta-

tion.

If more than 20 stations are stored in the station

table, you can display the next 10 stations by

pressing the oval cursor control key.

Return to previous station

With the red key

, you can switch back and

forth between the last two stations you selected.

11. Picture settings, general

Call the menu

In a menu with two asterisks (**), the set-

tings for certain menu items cannot be

changed.

ꢀ

You can adjust the picture settings (brightness,

contrast, chrominance, etc.) for all programme

positions and save these settings as the standard

values. These standard values can be recalled at

any time by pressing the „OK“ key.

Defining the picture settings:

• Press the „MENU“ key to open the TV menu.

• Press the „OK“ key to open the menu „Picture

and sound“.

Picture pos.,vertic*

• Use the cursor control key to select the

individual picture settings.

• Press the „OK“ key and then use the

Film mode*²⁾

CTI*

ꢀ

Picture-Volume

AV devices

Comb filter

Noise reduction

Sound set.prog.po Picture sharpness

Sound settings, gen. Colour intensity

Pict. set.,prog. posn.* Contrast

Pict. settings, gen. Brightness

key to change the setting in the set-

Station table

Timer

ting window.

• Use the cursor control key to select the

3rd line in the setting window "...

accept as a standard value: OK".

• Save the new setting as the standard

value by pressing the „OK“ key.

Configuration

: select,

OK: go to

settings.

Brightness

Standard value

Accept 61 as the standard value:

• Press the „TV“ key to close the menu

ꢀ If these standard settings are unsatisfactory

for some programme positions, you can

define special individual settings for these

positions as described on the next page.

2) Rotation

This function can be used to compensate for any

tilting of the picture caused by the earth’s magne-

tic field. The function should be executed when the

set is first installed and if the set is subsequently

moved to a different position.

3) Film mode – see glossary.

2) Available only on TV sets which are equipped

with this option.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

11. Picture settings, general

Call the menu

In a menu with two asterisks (**), the set-

tings for certain menu items cannot be

changed.

ꢀ

Panorama function ²⁾

This setting can be made only on 16:9 TV

sets.

ꢀ

The panorama function can be used to expand

"normal" programmes in 4:3 format to the 16:9

format. This is done by increasing the width of the

picture to fill the complete width of the screen.

Setting Panorama²⁾mode:

Rotation²⁾*

Picture pos., vertica

Panorama²⁾*

CTI*

Comb filter*

Noise reduction*

Picture sharpness*

Colour intensity

Contrast

ꢀ

• Press the "MENU" key to open the TV

menu.

• Press the "OK" key to open the menu

"Picture and sound".

• Use the cursor control key to select

"Panorama".

• Press the "OK" key and then, in the

Picture-Volume

AV devices

Station table

Timer

Sound set.prog.po

Sound settings, gen.

Pict. set.,prog. posn.*

Pict. settings, gen.

Configuration

: select,

OK: go to

settings.

Panorama

On, zoom 1 Mode

Non-linear

setting window, use the

key to

change the setting for "Panorama".

• Use the cursor control key to select the menu

item "Mode" and use the

"linear" or "non-linear".

key to select either

• Press the "OK" key to save your changes.

The picture shows the factory setting.

• Press the "TV" key to close the TV menu.

The functions "Panorama²⁾" and "Zoom"

can also be used together.

ꢀ

2) Available only on TV sets which are equipped

with this option.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

11.1 Picture settings for a specific

programme position ...

Call the menu

In a menu with two asterisks (**), the pictu-

re settings for a specific programme posi-

tion cannot be changed.

ꢀ

If the standard settings are not satisfactory for

certain programme positions, you can define dif-

ferent settings for these positions with the menu

item „Picture settings for Pr ...“. These settings

apply only to the selected programme position

and cannot be overwritten by the standard set-

tings.

VCR

Colour standard

Colour offset

CTI

Comb filter

Defining different picture settings for Pr.

xy:

ꢀ

Picture-Volume

AV devices

• Select the programme position for

which you want to define different pic-

ture settings.

• Press the „MENU“ key to open the TV

menu.

Sound set.prog.po Noice reduction

Sound settings, gen. Picture sharpness

Pict. set.,prog. posn.* Colour intensity

Pict. settings, gen. Contrast

Station table

Timer

Configuration

: select,

OK: go to

settings.

These settings apply to the currently selected programme

position.

• Press the „OK“ key to open the menu

„Picture and sound“.

• Use the cursor control key to select the

item „Picture settings for Pr. xy“.

• Press the „OK“ key and then select the setting

you want to change.

• Press the „OK“ key to confirm your selection

and then, in the setting window, use the

to change the setting.

key

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

You can also define and recall the individu-

al picture settings in the station table.

ꢀ

12. Sound settings, general

Call the menu

In a menu with two asterisks (**), the set-

tings for certain menu items cannot be

changed.

ꢀ

You can adjust the sound settings (volume, treble,

bass, etc.) for all programme positions and save

these settings as the standard values. These stan-

dard values can be recalled at any time by pres-

sing the „OK“ key.

Defining the sound settings:

• Press the „MENU“ key to open the TV

menu.

Stereo wide*

Spatial sound*

Balance*

Tone settings

Volume headphones

ꢀ

• Use the blue key

to select the menu

Picture-Volume

AV devices

„Picture and sound“ and press the

„OK“ key to open it.

• Use the cursor control key to select the

item „Sound settings, general“.

• Press the „OK“ key and then select the

setting you want to change.

Sound set.prog.po Bass

Sound settings, gen. Treble

Pict. set.,prog. posn.* Volume control

Pict. settings, gen. Volume

Station table

Timer

Configuration

: select,

OK: go to

settings.

Volume

Satandard value

Accept 55 as the standard value: OK

• Press the „OK“ key to confirm your

selection and then, in the setting window, use

the

key to change the setting.

• Press the „OK“ key to save the new setting as

the standard value.

• Press the „TV“ key to close the menu.

If these standard settings are unsatisfacto-

ꢀ

ry for some programme positions, you can

define special individual settings for these

positions as described on the next page.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

12. General sound settings

Automatic volume correction

Some stations transmit their commercials at a hig-

her volume than the actual programme. In order to

avoid having to adjust the volume with the remote

control each time this happens, you can activate

the automatic volume correction function.

This function compensates, as far as possible, for

the differences in the sound volume.

The setting made here applies to all programme

positions.

Activating automatic volume correction:

• Press the "MENU" key to open the TV

menu.

Stereo wide*

Spatial sound*

Balance*

Tone settings

Volume headphones

Bass

ꢀ

• Press the "OK" key to open the menu

"Picture and sound".

Picture-Volume

AV devices

• Use the cursor control key to select

"General sound settings".

Sound set.prog.po

Station table

Timer

Sound settings, gen. Treble

Pict. set.,prog. posn.* Volume control

Pict. settings, gen. Volume

• Press the "OK" key and then use the

cursor control key to select "Volume

correction".

Configuration

: select,

OK: go to

settings.

Volume control on

• Press the "OK" key and then, in the set-

ting window, use the

the setting.

key to change

* Press the "OK" key to save your changes.

* Press the "TV" key to close the TV menu.

The "Volume correction" function in the

ꢀ

menu "General sound settings" overrides

the "Volume correction" function in the

menu "Sound settings for Pr...".

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

12.1 Sound settings for a specific

programme position ..

Call the menu

In a menu with two asterisks (**), the set-

tings for certain menu items cannot be

changed.

ꢀ

If the standard settings are not satisfactory for cer-

tain programme positions, you can define diffe-

rent settings for these positions with the menu item

„Sound settings for Pr...“. These settings apply

only to the selected programme position and can-

not be overwritten by the standard settings.

Defining different sound settings for Pr. xy:

• Select the programme position for

which you want to define different

sound settings.

• Press the „MENU“ key to open the TV

menu.

ꢀ

Picture-Volume

AV devices

Sound set.prog.po

Station table

Timer

• Use the blue key

to select the menu

Sound settings, gen.

Pict. set.,prog. posn.*

Pict. settings, gen.

Forced mono*

Tone settings*

Volume correction

„Picture and sound“ and press the

„OK“ key to open it.

• Use the cursor control key to select the

item „Sound settings for Pr. xy“.

• Press the „OK“ key and then select the

setting you want to change.

Configuration

: select,

OK: go to

settings.

These settings apply to the currently selected programme

position.

• Press the „OK“ key to confirm your selection

and then, in the setting window, use the

to change the setting.

key

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

You can also define and recall the individu-

al sound settings in the station table.

ꢀ

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

12.2 HiFi output

Audio sockets are provided on the back of the TV

set (see Page 76 of the Operating Instructions) and

can be used to connect the TV set to a HiFi system

If this is done, some changes must be made in the

menu "HiFi output".

If you wish to adjust the sound settings only on the

HiFi system, you must set the HiFi output to con-

stant.

If you do this, it is no longer possible to adjust the

sound with the Metz remote control (except for the

mute function

If you want to be able to adjust the sound with the

Metz remote control, you must set the

HiFi output to variable.

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Scope of operation

EPG settings

Setting the HiFi output

Picture-Volume

AV devices

Station table

Timer

•

Press the "TV" key to open the TV menu.

Automatic zoom*

Sound settings*

HiFi output*

Init. prog. position*

Display configuration*

• Press the red key

figuration" menu.

to open the "Con-

• Use the cursor control key to select

"Operation" and then "HiFi output".

• Press the "OK" key and then, in the set-

ting window, use the

desired parameter.

Configuration

Language*

HiFi-Ausgang

konstant

: select,

OK: go to

settings.

Ausgangspegel

key to set the

• Press the "OK" key to save your changes..

• Press the "TV" key to close the TV menu.

In normal TV mode, the setting "Sound via..." can

be changed with the yellow key

and the

key.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

12.3 Sound settings

Call the menu

In the menu "Sound settings" you can activate a

volume reduction (two-stage muting) function.

If this function is active, you can reduce the volume

in TV mode in two stages with the key "Mute"

Activating the volume reduction function

• Press the "Menu" key to open the TV menu.

• Press the red key

ration".

to open the menu "Configu-

• Use the cursor key to select "Operation" and

"Sound settings".

• Press the "OK" key and then, in the settings win-

dow, use the

"On".

key to set "Mute (two-stage)" to

–

You can also select the desired sound out-

put with the function "Sound via", where

you can choose one of the following

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Scope of operation

EPG settings

Automatic zoom

Sound settings

HiFi output

Init. prog. position

Display configuration

Picture-Volume

AV devices

Station table

Timer

options with the

HiFi or Surround.

key: loudspeakers,

–

• Press the "OK" key to save the new set-

tings.

Configuration

Language*

• Press the "TV" key to close the TV

menu.

: select,

OK: go to

settings.

Mute (two-stage) on

Sound via Loudsp.

In normal TV mode,

• pressing the mute key

once reduces the volu-

me by 12 points on the scale;

• pressing it again within the next five seconds

reduces the volume to "00".

• You can subsequently restore the volume to the

default value by pressing the mute

again.

key

Call the menu

12.4 Centre loudspeaker

If you use a surround-sound system for playing

back the TV sound signal, the TV set acts as the

centre loudspeaker.

In normal TV mode, press the yellow key

and

use the P+/P- key to select "Sound via". Then use

the

key to select the setting "Sound via sur-

–

round".

Setting the centre loudspeaker volume

• Press the "Menu" key to open the TV menu.

• Press the "OK" key to open the menu "Picture

and sound".

• Use the cursor key to select "Sound settings,

general" and then "Centre loudspeaker".

* Press the "OK" key and then, in the set-

ꢀ

tings window, use the

desired volume.

key to set the

–

Picture-Volume

AV devices

• Press the "OK" key to save the new set-

tings.

• Press the "TV" key to close the TV

menu.

Factory settings

Volume headphones

Centre volume

Sound set.prog.po

Sound settings, gen.

Pict. set.,prog. posn.*

Station table

Timer

Configuration

: select,

OK: go to

settings.

Pict. settings, gen. HiFi output

In normal TV mode, you select the

Centre volume

"Sound via" options by pressing the yel-

Satandard value

Accept 55 as the standard value: OK

low key

and then using the

key.

–

13. Colour standard

Call the menu

In a menu with two asterisks (**), the set-

tings for the menu item "Colour standard"

cannot be changed.

ꢀ

Your TV set normally detects the colour standard

(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)

automatically. If this automatic function does not

work, you can select the colour standard manually.

The colour standard function is set in the factory

to „Automatic“.

Setting the colour standard:

• Select the programme position for

which you want to set the colour stan-

dard.

• Press the „MENU“ key to open the TV

menu.

009 MDR

008 SW 3

007 N24

006 PRO 7

005 RTL

004 SAT 1

003 Bayern 3

002 ZDF

ꢀ

Decoder

Picture-Volume

AV devices

Station table

Timer

Sound correction

Colour standard*

Picture corrections*

Picture quality*

Enter Logo

• Press the white key

„station table“.

to open the

Configuration

: select,

OK: go to

settings.

001 ARD

Frequency/channel

• Move the cursor to „Colour standard“.

• Press the „OK“ key to confirm your

selection and then, in the setting win-

Colour standard Automatic mode

dow, use the

key to select the

–

appropriate colour standard.

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

2) Available only on TV sets which are equipped

with this option.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

14. Display configuration

In a menu with two asterisks (**), the set-

tings for the menu items "Display configu-

ration" and "Automatic zoom" cannot be

changed.

ꢀ

The green display²⁾can be programmed to show

the time, the station logo or the programme posi-

tion number.

Setting the display configuration:

• Press the „MENU“ key to open the TV

menu.

Operation

ꢀ

• Press the red key

„Configuration“.

• Use the cursor control key to select

„Operation“ and then „Display confi-

guration“.

to open the menu

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

Scope of operation

EPG settings

Automatic zoom*

HiFi output*

Init. prog. position*

Display configuration*

Configuration

Configuration Language*

• Press the „OK“ key.

: select,

• In the setting window, use the cursor

control key to select either „Display

brightness“ or „Permanent display“.

Brightness of Display

Permanent display

Time

OK: go to

settings.

• Change the setting with the

key.

–

Operation

ꢀ

• Press the „OK“ key to save the new

setting.

• Press the „TV“ key to close the menu.

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

Scope of operation

EPG settings

Automatic zoom*

HiFi output*

Init. prog. position*

Display configuration*

Setting the automatic zoom

Configuration

Configuration Language*

If the automatic zoom function is activa-

ted, pictures in "widescreen" format,

such as 16:9 programmes, will be

expanded automatically to fill the full

height of the TV screen.

: select,

Brightness of Display

Permanent display

Time

OK: go to

settings.

If the automatic zoom function is deactivated, the

picture will not be expanded automatically.

2) Available only on TV sets which are equipped

with this option.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

15. Childlock

Call the menu

With this function, you can determine when the

TV set can be switched on and which program-

mes may be viewed at specific times. The child-

lock may be set:

a) for all programmes,

b) so that one to six programmes (Prog A ... Prog

F), called permitted programmes can still be

viewed,

c) so that all or all permitted programmes may be

viewed during a preset period (between the

specified start and end times).

After setting, the childlock must be saved with a

4-digit „Code“

Setting the childlock:

ꢀ

• Press the „MENU“ key to open the TV

menu.

Picture-Volume

AV devices

End viewing time*

• Press the green key

menu „Timer“.

a) Setting the childlock for all programmes:

Use the cursor control key to select

„Childlock“ and press the „OK“ key.

to open the

Time settings

Timer control

Reminder*

Childlock

Start viewing time*

Code input

Permitted programmes*

Childlock

Station table

Timer

Configuration

: select,

OK: go to

settings.

Activation off

In the setting window, use the

to set the childlock to „Active“.

key

–

• Press the „OK“ key to save the new setting.

b) Permitted programmes

Activate the childlock as described in step a),

above.

Use the cursor control key to open the file card

„Permitted programmes“ and press the „OK“

key. In the setting window, use the numeric

keys to enter the numbers of the permitted pro-

gramme positions or press the „AV“ key to per-

mit use of the AV programme position.

• Press the „OK“ key to save the new setting.

Call the menu

15. Childlock

c) Start and end times

Use the cursor control key to open the file card

„Start viewing time/End viewing time“„ and

press the „OK“ key. In the setting window, enter

the start and end times with the numeric keys.

Protecting the childlock settings with a code

• Use the cursor control key to open the

file card „Code input“ and press the

„OK“ key. In the setting window, enter

your personal code with the numeric

keys.

ꢀ

Picture-Volume

AV devices

End viewing time*

Time settings

Timer control

Reminder*

Childlock

Start viewing time*

Code input

Permitted programmes*

Childlock

Station table

Make a note of the code, since the

childlock can be switched off only

by entering it again!

ꢀ

Timer

Configuration

: select,

OK: go to

settings.

• Press the „OK“ key to save the code.

• Press the „TV“ key to close the menu.

Code * * * *

• Switch off the TV set with the

key.

The childlock is activated only when the TV

set is switched off.

ꢀ

Deactivating the childlock

If the childlock is active, this is indicated by the

display of a message when you switch the TV set

on. If you then enter the correct code, the child-

lock is temporarily deactivated and the TV set can

be operated „normally“ as long as it remains

switched on. If you wish to permanently deactiva-

te the childlock, proceed as follows:

• Press the „MENU“ key to open the TV menu.

• Press the green key

„Timer“.

to open the menu

• Use the cursor control key to select „Childlock“

and press the „OK“ key.

• In the setting window, use the

childlock to „Inactive“.

key to set the

–

• Press the „OK“ key to save the new setting.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

16. Reminder

Call the menu

In a menu with two asterisks (**), the set-

tings for the menu item "Reminder" cannot

be changed.

ꢀ

If you want to be reminded of something while

watching television, you can set a reminder time.

At this time, a box with the reminder appears on

the screen of the TV set.

Setting the reminder time

• Press the „MENU“ key to open the TV menu.

• Press the green key

menu „Timer“.

to open the

• Use the cursor control key to select

„Reminder“.

• Press the „OK“ key twice and then, in

the setting window, enter the desired

time (four digits) with the numeric

keys.

ꢀ

Picture-Volume

AV devices

Time settings

Timer control

Reminder’

Station table

Timer

Configuration

: select,

OK: go to

settings.

Childlock

Reminder time*

• Press the „OK“ key to save the new

setting.

Time - - : - -

• Press the „TV“ key to close the menu.

At the specified time, a box with the reminder

appears on the screen of the TV set. You can clear

this display by pressing any key.

If you do not want the reminder to appear

each day, you must clear it in the menu by

pressing the ll key.

ꢀ

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

17. Timer control

In a menu with two asterisks (**), the set-

tings for the menu items "Switch-on time"

and "Switch-off time" cannot be changed

ꢀ

In the menu item „Timer control“, you can pro-

gramme a switch-on time, a switch-off time and a

sleep timer (switch off after ...).

Switch-on time: the TV set is switched on at the

specified time.

Switch-off time: the TV set is switched off at the

specified time.

Switch off after ...: (Sleep Timer): the TV set is

switched off after the period you specify

(in increments of 15 minutes).

ꢀ

Setting the times

Picture-Volume

AV devices

• Press the „MENU“ key to open the TV

menu.

• Press the green key

menu „Timer“.

• Use the cursor control key to select

"Timer control".

Time settings

Timer control

Reminder*

Childlock

Station table

Switch off after ...

Switch-off time

Switch-on time

to open the

Timer

Configuration

: select,

OK: go to

settings.

Time - - : - -

• Use the cursor control key to select

„Switch-on time“ or „Switch off time“.

• Press the „OK“ key twice and then, in the set-

ting window, enter the desired time (four digits)

with the numeric keys.

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

At the specified switch-on time, the TV set switches

from standby mode (red LED on) to normal TV

mode. If you do not press any key on the remote

control unit within 10 minutes, the TV set switches

back to standby mode. This ensures that the TV set

does not remain switched on if you are not at

home.

If you do not want the TV set to switch itself

ꢀ _{on or off each day, you must clear the times}

in the menu by pressing the ll key.

18. Setting the time

Call the menu

When the TV set is switched on with the main

switch, it normally gets the date and time from the

data transmitted with the programme (if it is tuned

to a station which transmits Teletext).

If the data are not received correctly, or if the sta-

tion you are watching does not send such data,

you can set the date and time manually.

Normally, this function is not needed: even the

changeover between summer and winter time is

executed automatically.

Setting the time and date

• Press the „MENU“ key to open the TV menu.

• Press the green key

menu „Timer“.

• Use the cursor control key to select the

file card „Set time“.

• Press the „OK“ key twice.

• In the setting window, enter the current

time with the numeric keys.

to open the

ꢀ

Picture-Volume

AV devices

Time settings

Station table

Timer control

Reminder*

Childlock

Local time offset

Current date

Current local time

Timer

Configuration

: select,

OK: go to

settings.

• The clock starts running from this time

when you press the „OK“ key.

• Use the cursor control key to select the

file card „Current date“.

You can set the date and time manually if they have not

been set automatically.

• Press the „OK“ key.

• In the setting window, enter the current date

with the numeric keys.

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the menu.

The local time offset is the difference between

the local time and Greenwich Mean Time

(GMT). This time difference and any necessary

switching between summer time and winter

time are normally detected automatically by the

TV set.

They need to be set manually only if the TV set

does not detect them automatically.

Call the menu

19. Function keys

The remote control has four functions keys: F1, F2

AV and F3. You can program function keys F1, AV

and F3 with any desired function.

Special

The function keys F1 and F3 are pro-

grammed in the factory with the setting

"All functions", which means that all

available special functions are displayed

when you press one of these keys.

Functions 1

PIP on

ꢂ

ᕢ

ᕣ

ᕤ

9-programme on

Picture format

Picture pos., vertical

Programming function key F1, AV or F3

with a desired

• Press the "MENU" key to open the TV menu.

• Press the red key

tion" menu.

to open the "Configura-

• Use the cursor control key to select "Function for

F1, AV or F3".

• Press the "OK" key and use the cursor control

key to select one of the available functions.

• Press the "OK" key and then, in the setting win-

dow, use the

to "On".

key to set the selected function

• Press the "OK" key to save your chan-

ges.

Operation

ꢀ

• Press the "TV" key to close the TV

menu.

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

All F1 functions

Picture format

9-programme

PIP

Configuration

Language*

: select

menu item

The function key can be programmed with any desired

function.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

20. Special functions

Picture-in-picture (PIP)

Call the menu

The remote control unit has three function keys: F1

and F3. These keys are pre-programmed in the

factory.

The PIP picture can be used to display a second

TV station or the picture from an AV device.

Calling picture-in-picture (PIP) function:

• If "F1" is already programmed with

the function "Picture in picture", briefly

press the "F1" key; otherwise, hold the

"F1" key depressed until "Special func-

tions 1" is displayed and then press

the ቢ key to display the PIP picture.

Special

Functions 1

ꢂ

PIP on

9-programme on

Picture format

ᕢ

ᕣ

• You can shift the PIP picture with the

cursor control keys ̇ ̈ . The current

position is saved.

• With the "OK" key, you can switch the

PIP frame to active (red) or inactive

(white).

• The contents of the PIP picture can be changed

only when the PIP frame is active (red).

If this is the case, you can use the numeric keys

or the "P+/P-" rocker key to select another pro-

gramme position for display in the PIP picture.

To display the picture from an AV device con-

nected to the TV set, press the "AV" key and

then select the AV device with the numeric keys.

• Pressing the red key

tures.

exchanges the two pic-

• Pressing the green key

causes the PIP picture

to be displayed as the large picture and termi-

nates the PIP function.

• To remove the PIP picture from the screen, press

the „TV“ key.

If a recording has been programmed in the

ꢀ _{timer menu, the program being recorded is}

displayed in the PIP picture when the PIP

function is activated.

20. Special functions

Call the menu

9-programme overview

With this function, you can open an overview of

the current programme position and the next eight

positions. The nine small programme windows are

updated at intervals. Each shows a snapshot of

the current programme.

Calling the 9 PRG. overview:

• If "F1" is already programmed with the function

"9x multipicture", briefly press the "F1" key;

otherwise, hold the "F1" key depressed

until "Special functions 1" is displayed

and then press the ባ key to display

ꢂ

ᕢ

ᕣ

the 9x multipicture.

ARD

ZDF

BR 3

• You can use the "P+/P-" rocker key to

select the previous or following nine

programme positions.

ᕤ

ᕥ

ᕦ

SAT 1

RTL

DSF

• To switch to one of the programmes

displayed in this function, simply press

the corresponding numeric key ቢ to

ቪ.

ᕧ

ᕨ

ᕩ

PRO 7

MDR

MTV

• To terminate the 9 Prg. overview, press the "TV"

key.

Not possible with an external satellite receiver!

20. Special functions

Picture format

Calling the picture format function:

Call the menu

•

If "F1" is already programmed with the function

"Picture format ", briefly press the "F1" key;

otherwise, hold the "F1" key depressed until

"Special functions 1" is displayed and then press

the ቤ key and select the desired picture format.

• You can use the "P+/P-" rocker key to select the

various functions. You can also set the zoom

factor for the selected picture format within the

next five seconds.

Special

• The settings made here (except for the auto-

matic zoom in the TV menu) remain stored

until you switch to another programme

position or switch off the TV set.

Functions 1

ꢂ

PIP on

9-programme on

Picture format

ᕢ

ᕣ

Zoom

After selecting the "Zoom" function, you can

adjust the zoom factor with the

key.

–

In addition to adjusting the zoom factor, you

can move the picture up or down on the

screen so that, for example, the station logo

or subtitles remain visible. To do this, press the F1 key

and then the ብ key and move the picture with the

"P+/P-" rocker key.

Standard 4:3

This is the standard setting for all programmes

with the aspect ratio 4:3.

Panorama*

With the Panorama function, you can adjust the picture of

a programme in 4:3 aspect ratio to fill the 16:9 format of

the screen (only on sets with 16:9 screen). The picture is

expanded uniformly in the horizontal direction. You can

also zoom the picture. The Panorama function can be swit-

ched on and off in the menu "Picture and Sound" under the

heading "Picture settings, general".

*The menu item "Panorama"

can be activated only on TV

sets which support the 16:9

aspect ratio.

16:9 full screen

This function is used to display the picture format

of external devices (such as 16:9 video recorders)

with the correct aspect ratio.

Call the menu

21. Teletext

Teletext is a free information service provided

by many TV stations. Within this „electronic

newspaper“, you can scroll through the pages

in various ways.

TEXT

Calling Teletext:

• Press the „TEXT“ key.

TV Guide 2

If the station you are watching trans-

mits „TOP“ teletext, two file-card

boxes are displayed (see the picture

on the left). Otherwise, page 100

appears (see the lower picture).

• In the case of „TOP“ stations, you can

select a file card with the cursor con-

trol key.

FS-Sendungen

ARD morgen

ARD heute

TV Guide

Sport 1

ꢀ

Themen

Subjects

Chapter

Pages

Wetter

tagesschau

Next BookMark

Impressum

Inhalt

Set BookMark Übersicht

: select Sub-

jects / Section.

OK: display page

• After selecting a card, press „OK“ to

open it.

Controlling Teletext when the pages are displayed directly:

The blue key

is used to preselect the

subject selection function.

The yellow key

the section selection function.

is used to preselect

Blue preselection key

Yellow preselection key

White preselection key

The white key

the page selection function.

is used to preselect

After pressing one of these preselection

keys, you can step through the subjects,

sections or pages with the rocker switch

„P+/P-“.

You can also move directly to a page

by entering its number with the numeric

keys. If multiple sub-pages exist for the

selected page, their numbers are

displayed in black. In the example on

the left, there are five sub-pages.

You can scroll through the sub-pages

with the cursor control key.

mark

15:30:23

Topics

Sections Seiten

Pages

100 100 SAT.1 21.05.02

00 01 02 03 04 05 06 07 08 09

Sub-pages

21. Teletext

Teletext: setting marks³⁾

Double font size

You will probably have your favourite

Teletext pages, such as stock exchange

reports, news, weather forecasts, which

you visit frequently.

To permit rapid access to such pages,

you can set so-called „marks“ on these

pages.

When viewing Teletext pages, you can

switch to a larger font with the F1 key.

The first time you press this key, the

upper third of the page is displayed with

the large font. Pressing it again displays

the centre third of the page and pres-

sing it a third time displays the bottom

third of the page. Pressing the key a

fourth time returns to the full-page

display with the normal font size.

To do this, first go to the page on which

you want to set the mark.

• Then press the red key

for „Set

mark“ to set a mark on this page. A

„paper-clip“ symbol appears at the top

left corner of the page. If the page has

sub-pages, the mark is always set and

displayed on the currently displayed

sub-page.

Riddle solution key

Function key F2 is programmed to

display hidden text on a Teletext page,

such as the solutions to riddles.

Return to last contents page

You can return directly to the last con-

tents page at any time by pressing the

ᕌ key.

Up to 10 marks can be set on each

ꢀ

programme position. The total

number of marks (on all program-

me positions) is restricted to 120.

Teletext: scrolling by marks³⁾

With Teletext active, you can scroll

sequentially through all marked pages by

repeatedly pressing the green key

You can even view your favourite pages

directly from the TV mode with the

„TEXT“ key. Pressing the „TEXT“ key

opens Teletext and selects the first marked

page. You can then scroll through the

marked pages with the „TEXT“ key.

Pressing the „TEXT“ key with the last mar-

ked page displayed switches back to the

TV programme.

Page stop

You can stop the automatic stepping

through a multiple page by pressing the

II key or the "OK" key. Pressing the same

key again restarts the automatic step-

ping.

Page selection with cursor

If your press the "OK" key, the page is

stopped and the cursor ̈ is displayed

at the top left corner of the screen. You

can then use the cursor keys ̇ ̆ ̈ ̄

to move the cursor within the currently

displayed page. This function is useful

for selecting pages from an index page

(such as page 100, 200, etc.). When

the cursor is positioned on the desired

page number, press the "OK" key to

display this page.

3) Not possible with an exter-

nal satellite receiver!

21. Teletext

Teletext: displaying active marks³⁾

If marks are set for a programme position, pressing

the F3 key displays a list of all marks, showing

where they are set. Pressing F3 again hides the list.

With the list displayed, you can select any des-

ired mark with the numeric keys.

Teletext: deleting marks³⁾

Call the teletext page whose mark you want to

delete and press the red key

delete the mark.

„Clear mark“ to

Teletext: subtitles

Your TV set can display subtitles transmitted on

Teletext together with the programme. If such sub-

titles are available, the station normally displays a

message at the beginning of the programme, tel-

ling you where to find the subtitles.

• Press the „TEXT“ key to open Teletext.

• In the case of „TOP“ stations, press the „OK“

key to open any page.

• Use the numeric keys to enter the number of the

page containing the subtitles.

3) Not possible with an exter-

nal satellite receiver!

22. AV devices

Call the menu

AV (Audio/Video) devices are devices which

provide picture and/or sound signals for play-

back on your TV set (for example, video cas-

sette recorders, DVD players, etc.).

In the menu „AV devices“, the setting window

displays a list of all common AV units.

Always connect AV devices exactly as

shown in the connection diagram in the TV

menu of your TV set!

ꢀ

SVHS/Hi8 and Data Logic video recorders must

always be connected as „Video recorder 1“. A „nor-

mal“ VHS video recorder may be connected as

„Video recorder 1“ or „Video recorder 2“.

Connect as follows:

Back of TV set

Connecting AV devices

• Press the „MENU“ key to open the TV

ꢀ

menu.

• Press the yellow key

Picture-Volume

AV devices

Station table

Timer

Euro1

to open the

DVD player

Euro2

RGB

menu „AV devices“. Some of the

EURO sockets are pre-programmed in

the factory (see the picture on the

right). If you want to change these set-

tings, you can select one of the AV

devices with the cursor control key and

delete it by pressing the ll key.

Euro3

Data Logic

DVD/Videorec. 1

Camcorder/Photo

FBAS

Front of TV set *

Configuration

SVHS/Hi8

Select device

Select a new device:

with

and

DVD/Videorec. 1 1 DVD

Satellite / SetTop

Camcorder/Photo

Other device

call device at-

DVD/Videorec. 2

Decoder

AV-Receiver / CD PC

tributes with OK

• Use the cursor control key to select the

device you wish to connect to the TV set.

• Press the „OK“ key to confirm your selection

and, in the setting window, set the parameters

„Signal OUT“ and „Signal IN“ to match the AV

device (see the operating instructions for the AV

device for details).

• Press the „OK“ key. The newly connected device

appears in the connection diagram.

Caution: connecting a new device may

ꢀ

cause an existing connection to be modi-

fied. If this happens, you will have to move

the cables for the affected AV device to the

correct positions.

Call the menu

In a menu with two aste-

risks (**), the settings for

this menu item cannot be

changed.

22. AV devices

Data Logic video recorder

ꢀ

„Data Logic“ is a system which permits a dialogue

between the TV set and a video recorder. This

„intelligent“ system provides such functions as:

- Automatic transfer of the settings for terrestrial

and cable stations to the video recorder.

- One-touch recording: the video recorder records

the programme you are currently watching.

- Automatic switching to the AV programme position.

- Direct control of recording from the timer menu

of the TV set.

-Automatically switching off the video recorder

when the TV set is switched to standby mode.

Under "Video recorder 1" in the menu "AV devi-

ces", set the field "Data Logic" to "On" and con-

nect your video recorder to the EURO

socket as shown in the picture.

Operation

ꢀ

Other comparable dialogue systems:

Qlink (Panasonic), EasyLink (Philips),

Megalogic (Grundig, SMARTLINK (Sony).

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

DataLogic

Terr. station search

Configuration

Language*

Data Logic: transferring the station

table

• Press the „MENU“ key to open the TV

menu.

: select Sub-

jects / Section.

Data transfer start Yes

OK: display page

• Press the red key

„Configuration“.

to open the menu

• Use the cursor control key to select „Automatic

station search“.

• Press the „OK“ key and then use the cursor con-

trol key to select „Data Logic“.

• Press the „OK“ key and then, in the setting win-

dow, select „Start data transfer: yes“ with the

key.

–

• Press the „OK“ key to transfer the stations table

from the TV set to the video recorder

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

• Press the „TV“ key to close the TV menu.

22.1 AV playback

Call the menu

AV playback

(Devices with switching voltage)

AV playback is the term for playing back video-

cassettes, DVDs, etc. from an AV device for vie-

wing them on a TV set.

In order to view the pictures, you must program-

me your TV set so that it automatically switches to

the AV programme position when a signal is

received at the EURO socket to which the AV

device is connected.

Programming automatic switching

Operation

ꢀ

In a menu with two asterisks (**),

the settings for this menu item can-

not be changed.

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Picture-Volume

AV devices

Station table

Timer

EURO 3

EURO 2

EURO 1

Programme switching is set to

"On" in the factory for both EURO

sockets.

ꢀ

Configuration Language*

: select Sub-

jects / Section.

OK: display page

Change station on

• Press the „MENU“ key to open the TV

menu.

• Press the red key

„Configuration“.

to open the menu

• Use the cursor control key to select „EURO

socket“.

• Use the cursor control key to select "EURO 1"

"EURO 2" or "EURO 3".

• Press the „OK“ key and then, in the setting win-

dow, set „Programme switching“ to „ON“ with

the

key.

–

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the TV menu.

When you subsequently start a playback opera-

tion on the connected AV device, the TV set swit-

ches to playback mode, regardless of the current-

ly selected programme position.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Call the menu

22.1 AV playback

This mode remains active until the TV set is swit-

ched to another programme position.

AV playback

(Devices without switching voltage)

In order to view the pictures, you must manually

switch your TV set to playback mode.

• Select any programme position.

AV-menu Playback

Videorecorder 1

ꢂ

ᕣ

ᕤ

Euro1

Euro3

Euro2

• Press the „AV“ key.

Videorecorder 3

DVD

•

Press the numeric key for the desired AV

device.

• The TV set now switches from the cur-

rent programme to playback mode.

• Start the playback operation on the

AV device. Playback mode remains

active until you switch to another pro-

gramme position.

Camcorder

Front of TV set

Pr1 ARD

record?

Picture quality when playing back from

tape machines

The VCR function provides the best possible picture

quality when playing back recordings from a tape

machine, such as a camcorder or video recorder.

Setting the VCR function

• Select the appropriate programme position.

• Press the „MENU“ key to open the TV menu.

• Press the „OK“ key to open the menu „Picture

and sound“.

In a menu with two aste-

risks (**), the settings for

the menu item "VCR" can-

not be changed.

ꢀ

• Use the cursor control key to select „Picture set-

tings for Pr xy“.

• Press the „OK“ key and then use the cursor

control key to select „VCR“.

• Press the „OK“ key for confirmation and use the

key to select „Opt. 1“. If this setting does

–

not produce a satisfactory picture quality,

switch to „Opt. 2“.

• Press the „OK“ key to save the new setting.

22.2 Copying between AV

devices

• Select any programme position.

• Press the „AV“ key to display the „AV menu

Playback“.

• Select the AV playback device with the numeric

keys.

•

The TV set switches from the current programme

to the selected playback device.

• Press the „AV“ key again.

• Then press the red key

ding device.

to select the recor-

• Press the green key to lock the selected signal

connection. If a Data Logic video recorder is

connected, it will immediately start to record,

providing there is a cassette with a protection

tag inserted.

• Start recording with the recording AV device.

• Play back with the playback AV device.

23. EPG - NexTView

NexTView is an Electronic Program Guide (EPG)

for all important programme providers. This EPG is

transmitted by various stations and also contains

the programme data for the other stations.

The TV set needs about 20 minutes to collect the

large amount of data for the first time.

• On TV sets with two tuners (standard configura-

tion) the data are collected by the second tuner

(see the next page) during normal operation of

the TV set. When the data have been collected,

the TV set stores the EPG in a special memory.

The EPG is updated regularly in this memory as

long as the TV set is not switched off with the

main switch.

• On TV sets with only one tuner (e.g. if your set

has been converted and has only one satellite

tuner):

- the set must be left tuned to the NeexTView pro-

gramme position for at least 20 minutes, or

- the data are collected during the night (between

02:30 - 03:00) while the set is in standby mode.

Not possible with an external satellite receiver!

23.1 Activating the EPG NexTView

Call the menu

The EPG function can be switched on and off as

desired. It is set to "On" in the factory.

EPG

On all programme positions where NexTView is

received, the TV set displays the following message

after a short delay:

This station is sending NexTView (EPG). Save it as

the EPG programme position?

• Yes

• No

The TV set is asking you whether you want to use

this programme position for collecting the data for

the EPG NexTView.

Press the red key for "No" - this pro-

gramme position is not used for receiving

the NexTView data. The message is still

displayed for all other programme posi-

tions where NexTView data are received.

Press the green key for "Yes" - this pro-

gramme position will be used for recei-

ving the NexTView data. The message is

then not displayed for other programme

positions where NexTView data are

received.

Operation

Function for AV*

ꢀ

Picture-Volume

AV devices

Station table

Timer

Function for F3*

Function for F1*

EURO sockets*

Station search

Country*

Scope of operation

EPG settings*

Automatic zoom*

HiFi output*

Init. prog. position*

Display configuration

Configuration

: select menü

Language*

EPG

item

EPG prog. position

Now showing

RTL 2

If you know the programme position for a

NexTView station, you can also enter its number

directly on the numeric keys.

You can overwrite any existing programme posi-

tion number or delete the number by pressing the II

key.

* The number of subjects and sections

displayed here depends on the opera-

ting scope setting.

Not possible with an external satellite receiver!

23.2 Collecting NexTView data

The EPG NexTView is transmitted by

- the Teletext function "Subtitles" is acti-

ve.

If the TV set is switched to standby mode

during data collection, the text

"NexTView" appears on the green

display to remind you that the data-col-

lection operation is still running.

various stations and the information pro-

vided by each station may differ. You

thus have a choice between several dif-

ferent NexTView programme guides.

• On TV sets with only one tuner (e.g. if

your set has been converted and has

only one satellite tuner):

Switch to the NexTView programme

position.

Leave it on this programme position

for at least 20 minutes.

• TV sets with two tuners:

The TV set collects the NexTView data

with the aid of its second tuner.

Special notes:

Stations which are listed in the TV station

list of the TV set with an automatic logo

(set automatically by the TV set) are also

shown in the EPG. Stations which carry

two different programmes (such as a

children’s programme in the daytime

and another programme in the evening)

must be stored in two different program-

me positions.

The collection operation is interrupted or

cancelled if:

- you switch the programme position

from terrestrial to SAT or vice versa;

- you call the "Picture in Picture" func-

tion;

- you open the Teletext function;

- a recording is programmed in the

menu "AV recording";

- a "timer recording" is running or will

begin within the next hour;

Not possible with an external satellite receiver!

23.3 Using NexTView

Call the menu

Once all of the data have been collected, pres-

sing the "EPG" key displays the NexTView pro-

gramme guide, showing the programme current-

ly running on this programme position.

The left column of the EPG shows the keys with

special functions in this mode:

P+/P- Select a programme

EPG

Watch the selected programme or set a

reminder for it

Cursor control key ̇ ̈ Scroll forward

Heute

20:07

or back through the programme times

- Mo Di Mi Do Fr Sa So + 13.08

20:00 RTL 2

RTL II News

20:00 ARD

Tagesschau

20:00 Nord 3

Tagesschau

20:00 West 3

Tagesschau

ꢀ

0-9

Enter a time for which program-

mes are to be displayed

-20:15

All programmes

Selection

-20:15

Return to the TV picture

Interest

Users

blue Display all programme types

yellow Display only programme types

which match the current user

and their preferences

20:00 3 SAT

Tagesschau

Record

0..9: enter time

:select

OK: view

News

white Set user preferences

green Select a user (father, mother,

teenager, child)

red

Selected programme is ready for recor-

ding (see Page 55)

Selecting and viewing a programme, setting a

reminder

In the EPG, you can select a programme with the

"P+/P-" rocker key.

• By pressing the "OK" key, you can

- watch the programme if it is already running or

- set a reminder for it if it starts later. In this case,

a green check mark appears after the start

time.

Not possible with an external satellite receiver!

23.3 Using NexTView

Setting the user

By repeatedly pressing the green key, you can set

the current user (father, mother, teenager, child)

for the NexTView programme guide.

Setting preferences

Each user can set the NexTView pro-

gramme guide to reflect the personal

preferences.

Music

ꢁ

MDR

PRO 7

RTL 2

RTL

SAT 1

Bayern 3

ZDF

ARD

Education

Children/School

Sport

Leisure

Shows

Current affairs

Feature film

Station selection

ꢀ

All programmes

Selection

• Press the white key

• Use the "P+/P-" rocker key to select

one of the blue cards.

• Use the cursor control key to switch to

the yellow page.

• Use the "P+/P-" rocker key to select

the appropriate yellow cards and

mark each one by pressing the "OK"

key.

IInntteerreesstt

Users

Record

Display all stations

Up to eight stations

can be selected

Up to eight preferences can be selected for

each user.

ꢀ

• You can remove the red check marks again by

pressing the "OK" key.

• Save the selected preferences by pres-

ꢁ

Music

water sports

motor sports

athletics

sing the red key

Education

Children/School

Sport

Leisure

Shows

Current affairs

Feature film

Station selection

ꢀ

All programmes

Selection

team sports

tennis/squash

football/soccer

sport magazine

special events

sport (general)

Users

Record

Select subjects

with

ꢁ

motor sports

ꢁsport magazine

ꢁspecial events

ꢁwinter sports

ꢁlocal sports

team sports

tennis/squash

football/soccer

and OK

Not possible with an external satellite receiver!

23.3 Using NexTView

Call the menu

Recording a programme

If you have a Metz video recorder with dialogue

system, the NexTView programme guide permits

you to start a recording by pressing a single key.

EPG

• Open the NexTView programme guide.

• Use the "P+/P-" rocker key to select the pro-

gramme you want to record.

If a video recorder with dialogue system is con-

nected:

- Switch on the video recorder.

- Insert a cassette.

- Press the red key

the TV set.

If a normal video recorder is connec-

ted:

- Switch on the video recorder.

- Insert a cassette.

- Press the red key

control of the TV set - the TV timer is

programmed.

on the remote control of

Heute

20:07

- Mo Di Mi Do Fr Sa So + 13.08

20:00 RTL 2

RTL II News

20:00 ARD

Tagesschau

20:00 Nord 3

Tagesschau

20:00 West 3

Tagesschau

ꢀ

-20:15

All programmes

Selection

-20:15

Interest

Users

on the remote

20:00 3 SAT

Tagesschau

Record

- On the video recorder programme

a timer with the date and time on

the AV programme position so that

the programme provided by the TV

timer will be recorded.

0..9: Zeit wählen

:auswählen

OK: ansehen

Nachrichten - News

If you want to record a programme from a

terrestrial station (received via antenna or

cable), you must programme the video

recorder itself.

ꢀ

Not possible with an external satellite receiver!

Call the menu

24. Sat system

You must use the menu „SAT system“ to inform

the TV set of the settings for the SAT system.

These settings should always be made in the

order indicated by the yellow file cards, i.e. LNB

supply, DiSEqC control, etc.

LNB supply voltage

The LNB supply voltages for selecting the polarisa-

tion (horizontal H = 18 V, vertical V = 12 V) are

fixed and do not normally need to be changed.

If it should be necessary to change these

voltages, note the following setting

sequence.

Operation

Function for AV*

ꢀ

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

Picture-Volume

AV devices

Station table

Timer

Changing the settings

LNB freq., sat. A

22kHz signal

DiSEqC system

LNB supply voltage

• Press the „MENU“ key to open the TV

menu.

Country*

Language*

• Press the red key

„Configuration“.

• Use the cursor control key to select

„SAT system“.

to open the menu

Configuration

: select,

LNB voltage H 18V+ LNB voltage V 14V-

LNB supply voltage Ein

OK: go to

settings.

• Use the cursor control key to select „LNB sup-

ply“ and press „OK“ to confirm your selection.

The cursor is now located before the entry „LNB

voltage H“ in the setting window.

• You can now adjust the voltage slightly up (+)

or down (-) with the

key.

–

• Press the „OK“ key to save the new setting.

If your TV set is connected to a community

satellite system, the LNB supply voltage

must always be set to „Off“.

ꢀ

Possible only if a satellite upgrade kit is installed!

24. Sat system

Call the menu

DiSEqC system

The DiSEqC system permits your TV set to con-

trol the SAT system via the existing antenna

cable. It is a prerequisite for reception from

more than two satellites (e.g. reception from

Astra, Eutelsat and Hotbird).

It is not yet necessary to upgrade SAT systems

which are used only for reception from Astra.

Control of the SAT system for reception from

three or more satellites (e.g. Astra on 19.2°

Eutelsat on 16° and Hotbird on 13°) is no lon-

ger possible without DiSEqC.

Operation

Switching the DiSEqC system on and off

• Press the „MENU“ key to open the TV

menu.

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

ꢀ

Picture-Volume

AV devices

Station table

Timer

LNB freq., sat. B

LNB freq., sat. A

22kHz signal

DiSEqC system

LNB supply voltage

• Press the red key

„Configuration“.

to open the menu

Country*

Language*

• Use the cursor control key to select

„SAT system“.

• Use the cursor control key to select

„DiSEqC system „ and press „OK“ to

confirm your selection. The cursor is

Configuration

Change value with

+ and -

Confirm with OK

DiSEqC system Yes

now located before the entry „DiSEqC system“

in the setting window.

• Use the

key to select „Yes“ or „No“.

–

• Press the „OK“ key to save the new setting.

• Press the „TV“ key to close the TV menu.

Possible only if a satellite upgrade kit is installed!

Call the menu

24. Sat system

22 kHz signal/toneburst signal

These two signals are needed only for Sat systems

equipped with a multiswitch.

The 22 kHz signal should be used for switching bet-

ween the upper and lower frequency bands (called

the high band and the low band). The toneburst sig-

nal should be used for switching between satellites

(e.g. Astra and Eutelsat) in different positions.

The settings depend on the components

used in the Sat system and it may be

necessary to reverse the signal assign-

ments.

Operation

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

ꢀ

Picture-Volume

AV devices

Station table

Timer

LNB freq., sat. B

LNB freq., sat. A

22kHz signal

DiSEqC system

LNB supply voltage

Switching the 22 kHz and toneburst

signals on and off

Country*

Configuration

Configuration Language*

• Use the cursor control key to select

„22 kHz signal“ and press „OK“ to

confirm your selection. The cursor is

now located before the entry „22 kHz

signal“ in the setting window.

22 kHz signal

On Tone burst signal On

: select,

OK: go to

settings.

22 kHz sign. for Freq.band

• Use the

„Off“.

key to switch this signal „On“ or

–

• If you select „On“, you must specify, in the

second line, whether the 22 kHz signal is to be

used for the „Frequency band“ or the „Position“.

• You can then programme the toneburst signal in

a similar manner, selecting the other function.

• Press the „OK“ key to save the new settings.

Possible only if a satellite upgrade kit is installed!

24. Sat system

Call the menu

LNB frequencies for Sat A, Sat B, etc.

The LNB frequencies are used for switching bet-

ween the high band and the low band. In the fac-

tory, these frequencies are set to the standard

values of 9.75 GHz for the low band and

10.60 GHz for the high band.

The settings depend on the components used in

the Sat system. Please consult the data sheets or

the label attached to the LNB(s) for details of the

correct settings.

Operation

Setting the LNB frequencies

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

ꢀ

• Use the cursor control key to select

„LNB freq. Sat A“ and press the „OK“

key to confirm your selection. The cur-

sor is now located before the entry

Picture-Volume

AV devices

Station table

Timer

LNB freq., sat. B

LNB freq., sat. A

22kHz signal

DiSEqC system

LNB supply voltage

„Low band“ in the setting window.

Country*

Configuration

Configuration Language*

• Use the

key to set the frequency to

–

: select,

OK: go to

settings.

the correct value.

Low band 9,75 GHz

High band 10,60 GHz

• Use the cursor control key to switch to

„High band“ and use the

key to

set the frequency to the correct value.

• Press the „OK“ key to save the new settings.

–

Possible only if a satellite upgrade kit is installed!

Call the menu

25. Automatic Sat station search

Most of the common Sat programmes are already

stored in the TV set. These programmes are divi-

ded into groups as shown in the right-hand

column of the picture on the left. Each of these

groups can be read in only in its entirety

Starting the station search

•

Use the cursor control key to select the desired Sat

station card (in the example on the left: Astra) and

press the „OK“ key to confirm your selection.

• Press the „OK“ key again to load the selected

Sat stations.

• After all stations have been loaded,

they are displayed in a station list.

• If desired, you can then select indivi-

dual stations and delete them by pres-

sing the ll key.

Operation

ꢀ

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

DataLogic

Picture-Volume

AV devices

Station table

Timer

Hotbird radio

Hotbird TV

ADR

Astra radio

Astra TV

•

Press the „OK“ key to confirm that you

want to save the remaining stations.

Country*

Language*

Configuration

Terr. station search

• Use the numeric keys to enter the

number of the programme position in

which the first station in this list is to

be saved. The other stations in the list

will be saved in the programme posi-

tions following the selected position.

CAUTION! This will overwrite any sta-

tions currently in the specified and fol-

lowing positions!

: select,

OK: go to

Sation search (START)

settings.

• If you are not sure whether you want to save

the stations, you can cancel the operation by

pressing the „TV“ key.

• If you want to save the stations in the list, press

the „OK“ key.

If you are not satisfied with the order in which the

Sat stations are saved, see the section „Sorting

stations“.

Possible only if a satellite upgrade kit is installed!

26. Specific Sat station search

In the menu „Station table“, you can search for

individual Sat stations or enter their parameters

manually.

Call the menu

Direct frequency input or starting the station

• Press the „MENU“ key to open the TV menu.

• Press the white key

to open the station table.

• Use the cursor control key to select an empty

programme position or a programme position

which you want to change.

• Press the „OK“ key twice and then use

the

key to set the reception type to

–

ꢀ

„TV Sat“.

Picture-Volume

AV devices

• Press the „OK“ key. The cursor is now

located before „Reception type“.

• Use the cursor control key to select

„Frequency“.

• Press the „OK“ key, use the cursor

control key to select „search“ and start

the station search with the

select the various menu items with the

cursor control key and then use the

Station table

Timer

Configuration

Change value with Polarisation

+ and -

Confirm with OK

Low

AFC

Ein

11.348 GHz

3 Sat

Freq. Band

Frequency

Scan operation

key. Or:

–

Satellit

key or

–

the numeric keys to set the individual parame-

ters.

• Press the „OK“ to save the new station.

• Press the „TV“ key to close the TV menu.

Possible only if a satellite upgrade kit is installed!

Call the menu

27. One-touch Sat recording

Most video recorders do not have a satellite recei-

ver, which means that they cannot directly record

a programme from a satellite station.

However, you can record such a programme with

the aid of the OTR (one-touch recording) function

of your TV set.

• Select the programme position for the

Sat station whose programme you

want to record.

• Press the „AV“ key to open the menu

„AV playback“.

AV menu Playback

ꢂ

ᕢ

Videorecorder 1

EURO1

EURO2

DVD / CD

• Press the red key

to make this Sat

station available for recording.

• The last signal connection you made is

now displayed. If this is not the one

you want, use the numeric keys to

select the correct connection.

Pr 23 ARD

record ?

• Press the green key

to save the connection.

AV menu Record

If you have a Data Logic video recor-

der, recording starts automatically (pro-

viding there is a cassette in the recor-

der).

If you have a standard video recorder,

switch to the AV programme position

and start a one-touch recording (OTR).

The signal connection is protec-

tedand remains active even in

standby mode. You cannot

select all of the available devi-

ces. Wuold you like to ...

save the connection?

change the recording device?

• Press the „TV“ key to close the menu.

Videorecorder

ARD

Pr 23

Do not switch your TV set to a dif-

ꢀ

ferent programme position while

recording, since this will cause the

wrong programme to be recor-

ded.

Possible only if a satellite upgrade kit is installed!

28. Sat timer recording

Call the menu

If your TV set is equipped with a satellite receiver,

you can use the“Sat timer recording“ menu in the

TV to.record satellite programmes on your video

recorder.

• Press the „MENU“ key to open the TV menu.

• Press the green key

„Timer“.

to open the menu

• Use the cursor control key to select „Sat timer

recording“.

• Press the „OK“ key and then use the cursor

control key to select one of the timers.

• Press the „OK“ key and then, in the

setting window, use the numeric keys

Timer 8

Timer 7

Timer 6

Timer 5

Timer 4

Timer 3

Timer 2

ꢀ

to enter the programme position and

Picture-Volume

AV devices

the start and end times*. Use the

–

Time settings

Timer control

Reminder

key to select the recording device.

• Press the „OK“ key to save the set-

tings.

Station table

Timer

Childlock

Configuration

Sat timer recording Timer 1

• Press the „TV“ key to close the menu.

Change device

with + and -

Program Date

VOX

Time of day

30.01. 20:15-21:00 Videorecorder

Device

VPS

If you have a Data Logic video recorder,

the TV set will automatically start the

recording on the video recorder at the

specified time. If you have a standard video

recorder, you must also programme the recording

on the video recorder. In this case, specify as the

source the AV programme position (e.g. AV1) to

which your TV set is connected.

For VPS recordings, the TV set switches to the

recording state one hour before the specified start

time, so that it can react if the programme you

want to record starts earlier than planned. If you

have programmed a timer recording, do not

switch off the video recorder with its main switch.

* Please note, for VPS recor-

dings, that you must enter the

VPS start time as the start

time for the recording.

Possible only if a satellite upgrade kit is installed!

Call the menu

29. Initial programme position

You can define a so-called initial programme

position in this TV set. This is intended primarily

to enable you to switch to the AV programme

position when you are using an external Sat

receiver.

Setting the initial programme position

In a menu with two asterisks (**), the set-

tings for this menu item cannot be chan-

ged.

ꢀ

In the menu „AV devices“ (see also sec-

tion 22, „AV devices“), select and con-

nect a Sat receiver (Sat/SetTop).

Operation

Function for AV*

Function for F3*

Function for F1*

EURO sockets*

Station search

Sat system

ꢀ

Picture-Volume

AV devices

Station table

Timer

Scope of operation

EPG settings

Automatic zoom

HiFi output

Init. prog. position

Display configuration

• Press the „AV“ key.

• In the „AV playback menu“, use the

numeric keys to select the position

„Sat/SetTop“.

• Press the „MENU“ key to open the TV

menu.

Country*

Language*

Configuration

: select menu

item

Switch on with this station? Yes

• Press the red key

„Configuration“.

to open the menu

• Use the cursor control key to select „Operation“

and then „Initial programme position“.

• Press the „OK“ key and then, in the setting win-

dow, use the

key to select „Yes“.

–

• Press the „OK“ key to save the new setting.

After this, the AV programme position will

be selected automatically if you switch

your TV set on with the main switch and

ꢀ

then press the

trol unit.

key on the remote con-

30. Operation without the

remote control unit

The following procedures are intended only for

cases where the batteries of the remote control

unit are exhausted or the remote control unit is

not available.

The TV controls are at the front of the set. Depen-

ding on the TV model, they are located underne-

ath a cover which can be opened by pressing at

the marked position.

Switching on

Press the main switch on the TV set to switch the

set to standby mode. To switch the set on with pro-

gramme position 1 selected, press and hold the F

key until the green display lights up.

You can also execute the following functions with

the controls on the front of the TV set. The prese-

lected function remains active for 10 seconds.

Changing programme positions:

Press the

keys.

–

Volume:

Press the preselection key F until the bar display

for volume appears on the screen. Then press the

- or + key to adjust the volume.

Contrast:

Press the preselection key F until the bar display

for contrast appears on the screen. Then press the

- or + key to adjust the contrast.

31. Technical data

Mains voltage:

230 V ˜ 50 / 60 Hz

240 V ˜ (Australia only)

Antenna input::

75 Ohms unbalanced

DIN 45325

Reception bands:

Standard channels 2 - 12,

21 - 69

Special channels S1 - S20,

S21 - S41,

S42 .. S46 (Belgium OIR channels)

Power

consumption:

Spectral-72

Corum-72

2 x 20 + 40 W

(2x12 + 24 W)

ca. 140 W

ca. 135 W

ca. 170 W

ca. 135 W

2 x 20 + 40 W

(2x12 + 24 W)

Astral-72

2 x 20 + 40 W

(2x12 + 24 W)

Spectral-82

Spectral-84

Artos-82

2 x 20 + 40 W

(2x12 + 24 W)

2 x 20 + 40 W

(2x12 + 24 W)

Power consumption per hour:

See power consumption in Wh.

Standby mode: approx. 1.7 W

32. Options

• Satellite upgrade kit 081 NH 1017

for reception of satellite stations without the need

for a separate Sat receiver.

• Satellite upgrade kit 083 NH 1014

similar to the above, but also capable of recei-

ving unencrypted ADR (Astra Digital Radio) sta-

tions.

• DVB-S upgrade kit 025 NK 1014 (CI)

or 025 NL 1138

for reception of analogue and digital satellite sta-

tions broadcasting TV and radio programmes

without the need for a separate Sat receiver.

• DVB-T upgrade kit 057 NH 1118 (CI)

for the reception of digitally transmitted terrestrial

TV and radio stations which can be received with

a rod antenna or a terrestrial house antenna

without the need for an separate receiver.

• TV-HDR upgrade kit 010 NK 1014

This kit is for installation of a hard disk on which

programmes can be recorded and managed. The

hard disk feature also permits time-shift operation

and the remote programming (at extra charge) of

your TV set.

For other upgrade kits, please consult your local

dealer.

Important note for users of the TV set:

Unauthorised modification of this TV set, in parti-

cular changing the high voltage or using a CRT of

a different type, can result in the emission of high

levels of X-ray radiation. TV sets modified in this

manner no longer conform to the official appro-

val for operation and may not be used.

33. Connecting headphones

The headphone socket is located on the front of

the TV set. On many models, you must first open

a cover by pressing at the marked location in

order to expose the socket.

We recommend using headphones with an impe-

dance of at least 32 Ω. The use of headphones

with a lower impedance (about 8 Ω) will reduce

the dynamic range.

The headphone volume can be saved as one of

the standard settings. In the case of dual-langua-

ge programmes, you can listen to either sound

channel 1 or 2 on the headphones, regardless of

the channel selected for the loudspeakers.

34. Cleaning the TV set

Always switch off the TV set with the main

switch before cleaning it!

ꢀ

Clean the case of the TV set only with a soft, dry

(or slightly moistened) cloth. Do not use aggressi-

ve detergents or scouring powders, since these

could damage the paintwork and/or remove the

inscriptions. Clean the screen with a moist win-

dow leather.

35. Glossary

AV programme position

AV devices have one or more sockets, depending

on the model. These sockets are labelled on the

device, for example with AV1.

These sockets can be selected on the AV device

and the selected socket is shown on the display of

the AV device, for example A1 for socket AV1.

Bandwidth (optional)

The bandwidth needs to be set for sound sub-car-

riers. For ASTRA stations, the bandwidth should

normally be set to 130 kHz.

Stereo wide

When receiving programmes with stereo sound,

the physical distance between the loudspeakers

can be increased artificially to improve the stereo

effect.

Code

The settings for the childlock are protected by a 4-

digit numerical code which you can set a desired.

Write down or remember the code you define. If

you forget the code, ask your local dealer for assi-

stance

CTI

The CTI (Colour Transient Improvement) circuit is

an electronic circuit which ensures precise transi-

tions between differently coloured parts of the pic-

ture, preventing the colour smearing which could

otherwise occur. The CTI function is active for pro-

grammes received via the antenna input and for

picture signals from AV devices.

De-emphasis (optional)

This is a method for reducing noise on the sound

channel of stations received via satellite. The

appropriate settings can be found in specialist

magazines.

For ASTRA stations, always select „Panda“.

35. Glossary

Tone settings

You can switch the tone settings between „Nor-

mal“ and „Speech“.

Volume correction

The sound signals from different stations may vary

considerably in their volume. You can correct the

volume of a particularly loud or soft station so that

it is similar to that of the other stations. The volume

correction remains active even when the standard

values are recalled.

Standard settings

Standard settings are all values (such as bright-

ness, volume, chrominance, etc.) which are the

same for all programme positions.

Spatial sound

An artificial stereo effect can be generated for

mono transmissions.

Noise reduction

This setting can be used to improve the quality of

pictures with „snow“ or other noise resulting from

poor reception conditions. Depending on the

amount of interference, various correction facilities

are available and the noise reduction can be set

individually for each programme position.

VCR

The VCR function ensures optimum picture quality

when playing back recordings from tape devices

such as camcorders and video recorders.

Video level (optional)

The video level adjustment can be used to achieve

a uniform contrast for Sat stations with varying

modulation levels. However, this adjustment affects

only the signal at the EURO sockets and the cor-

rect setting must be determined by trial and error

(by making test recordings).

35. Glossary

Forced mono

In some cases, your TV set may switch from mono

to stereo during a programme, although the sta-

tion is not transmitting a stereo signal. This is nor-

mally due to the local reception conditions. If you

activate „forced mono“ for the selected program-

me positions, all programmes will be reproduced

in mono, regardless of the received signal.

Film mode

The function "Film mode" improves the picture

quality when viewing black-and-white program-

mes and cinema films. Moving objects are

displayed more smoothly and the picture looks

more plastic. This function is set in the factory to

"Automatic". For normal TV programmes, the

automatic setting switches the film mode off. We

also recommend setting film mode to "Off" when

playing back "noisy" films from a video recorder.

Progressive Scan

This function improves the sharpness and contrast

of the picture, particularly when playing back

films from a DVD player which is connected via

YUV (see page 75). For watching normal TV pro-

grammes, the progressive scan function should be

set to "Automatic".

Problem

Possible cause

Remedy

The TV set does not • There is no visual contact bet- • Ensure that there are no

react to commands

from the remote con-

trol unit.

ween the remote control unit

and the TV set.

• Sunlight is falling directly on

the infrared of the TV set.

obstacles.

• Avoid direct exposure

to sunlight.

• Replace the batteries.

• Switch on the TV set

with the mains switch.

• Switch the TV set off

with the mains switch

and then switch it on

again.

• The batteries in the remote

control unit are exhausted.

• The TV set has been switched

off with the mains switch.

• The microprocessor is faulty.

Unnatural colours,

coloured spots on

the screen

• Strong magnetic fields in the

vicinity of the TV set (from

loudspeakers or other devices)

• Move the loudspeakers

away from the TV set.

• If the coloured spots per-

sist, switch the TV set off

with the mains switch, wait

a few seconds and then

switch it on again.

After the TV set has • The childlock function has

• Enter the code number

with which the childlock

function was pro-

grammed.

been switched on,

the message „Please

enter code“ is

been programmed to prevent

selection of any station.

displayed.

The TV set does not

switch to the selected

programme position.

Instead, a list of sta-

tions is displayed with

a teddy-bear symbol.

• The childlock function has

been programmed to permit

selection of only the stations

shown in the list.

• Enter the code number

with which the childlock

function was pro-

grammed.

You are playing back a • The picture format for the AV

• Select the AV program-

me position and set the

picture format to 16:9

or "Automatic" (see

Section 11.1).

film from an AV device

in the aspect ratio

16:9, but the picture is

displayed in the 4:3

format.

programme position (e.g.

AV2) has not been set correct-

ly in the TV menu.

Possible cause

Immediate recording • The Data Logic video recorder • Connect the Data Logic

Remedy

Problem

of a terrestrial sta-

tion (received via

your house antenna

or cable) with Data

Logic does not work.

is not connected to the house

antenna or cable outlet.

video recorder to the

house antenna or cable

outlet with the aid of an

antenna cable.

General problems

with an external AV

device connected to

the TV set.

• The AV device has not been

set up correctly in the TV set.

• In the menu „AV devi-

ces“, select the appro-

priate device with the

cursor, set the „Signal

OUT/IN“ accordingly

and press the „OK“ key.

Connect the AV device

only as shown in the

connection diagram.

Data Logic does not • The Data Logic video recorder • In the menu „AV devi-

work.

with data interchange has not

been set up correctly in the TV

set.

ces“, define the Data

Logic video recorder as

video recorder 1 with

„Datalogic ON“.

• The Data Logic video recorder

is not connected to the EURO

socket (see av Menu)

• The Euro-AV (Scart) cable

being used does not have all

21 pins connected.

• Connect the Data Logic

video recorder to the

EURO socket with a

Scart cable.

• Use a Euro-AV (Scart)

cable with all 21 pins

connected.

Connecting facilities at back-panal of TV-sets

HiFi out –

to connect an

HiFi-amplifier

Center in –

external Sur-

round-set

Audio in –

if cinch sockets are in use,

scart-socket 1 is switched of

Service-socket –

for service-technician

Video in –

component-signal

(f.e. DVD-player)

Speaker-sockets –

for external speakers,

impedance 4Ohm

(f.e. Metz 10LH10)

Index

16:9 full sreen . . . . . . . . . . . . . . . . . . . . . .43

22 kHz signal . . . . . . . . . . . . . . . . . . . . . .60

9 PRG. overview . . . . . . . . . . . . . . . . . . . .42

Automatic Sat station search . . . . . . . . . . . .62

Automatic station search . . . . . . . . . . . . . . .18

AV devices, connecting . . . . . . . . . . . . . . . .47

AV programme position . . . . . . . .48,64,66,71

AV playback, devices with switching voltage .49

AV playback, devices without switching voltage .50

Bandwidth . . . . . . . . . . . . . . . . . . . . . . . .71

Batteries for remote control unit . . . . . . . . . . .5

Camcorder, connecting . . . . . . . . . . . . . . . .47

Centre loudspeaker . . . . . . . . . . . . . . . . . .32

Childlock . . . . . . . . . . . . . . . . . . . . . . . . .35

Cleaning the TV set . . . . . . . . . . . . . . . . . .72

Code for childlock . . . . . . . . . . . . . . . . . . .36

Colour standard . . . . . . . . . . . . . . . . . . . .33

Connecting external devices . . . . . . . . . . . .47

Copying recordings . . . . . . . . . . . . . . . . . .51

Country . . . . . . . . . . . . . . . . . . . . . . . . . .17

CTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Cursor . . . . . . . . . . . . . . . . . . . . . . . . .12,13

Data Logic video recorder . . . . . .47,48,57,65

Decoder, connecting . . . . . . . . . . . . . . . . . .47

Decoders (see AV devices) . . . . . . . . . . . . .47

De-emphasis . . . . . . . . . . . . . . . . . . . . . . .72

DiSEqC system . . . . . . . . . . . . . . . . . . . . .59

Display configuration . . . . . . . . . . . . . . . . .34

DVD player, connecting . . . . . . . . . . . . . . .47

EPG (NexTView) . . . . . . . . . . . . . . . . . . . .52

EPG activating . . . . . . . . . . . . . . . . . . . . . .53

EURO sockets . . . . . . . . . . . . . . . . . . . . . .49

External devices (playback) . . . . . . . . . . . . .49

External devices, connecting . . . . . . . . . . . .47

Fine tuning . . . . . . . . . . . . . . . . . . . . . . . .20

Font, double size . . . . . . . . . . . . . . . . . . . .45

Forced mono . . . . . . . . . . . . . . . . . . . . . . .73

Freeze frame . . . . . . . . . . . . . . . . . . . . . . .5

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . .71

Funktion keys . . . . . . . . . . . . . . . . . . . . . .40

Headphones . . . . . . . . . . . . . . . . . . . . . . .71

Help function . . . . . . . . . . . . . . . . . . . . . . .70

HiFi output . . . . . . . . . . . . . . . . . . . . . . . .30

Index

Initial programme position . . . . . . . . . . . . .66

Language for TV menu . . . . . . . . . . . . . . . .17

Large font . . . . . . . . . . . . . . . . . . . . . . . . .45

LNB frequencies . . . . . . . . . . . . . . . . . . . . .61

LNB supply voltage . . . . . . . . . . . . . . . . . .58

Low band . . . . . . . . . . . . . . . . . . . . . . . . .61

Marks in Teletext . . . . . . . . . . . . . . . . . . . .45

Marks, index . . . . . . . . . . . . . . . . . . . . . . .46

Marks, setting and deleting . . . . . . . . . .45,46

Menu language . . . . . . . . . . . . . . . . . . . . .17

Menus, menu control . . . . . . . . . . . . . . . . .13

Multiple pages, sub-pages . . . . . . . . . . . . .44

Mute function . . . . . . . . . . . . . . . . . . . . . .31

NexTView . . . . . . . . . . . . . . . . . . . . . . . . .52

NexTView activating . . . . . . . . . . . . . . . . .53

NexTView data collecting . . . . . . . . . . . . . .54

NexTView using . . . . . . . . . . . . . . . . . . . .55

NexTView, recording a programm . . . . . . . .57

Noise reduction . . . . . . . . . . . . . . . . . . . . .72

Numeric page selection . . . . . . . . . . . . . . .44

Operating scope . . . . . . . . . . . . . . . . . . . .15

Panorama . . . . . . . . . . . . . . . . . . . . . . . .43

Peripheral devices (see external devices) . . . .47

Picture format . . . . . . . . . . . . . . . . . . . . . .43

Picture in Picture (PIP) . . . . . . . . . . . . . . . . .41

Picture quality for video recorder . . . . . . . . .50

Picture settings . . . . . . . . . . . . . . . . .14,24,25

Picture sharpness . . . . . . . . . . . . . . . . .24,25

Programming Sat stations . . . . . . . . . . . .62,63

Recording Sat programmes . . . . . . . . . .64,65

Recording a programme with NexTView . . . .57

Reminder . . . . . . . . . . . . . . . . . . . . . . . . .37

Playing back from external devices . . . . .49,50

Riddle solution key . . . . . . . . . . . . . . . . . . .45

Sat programmes, recording . . . . . . . . . .64,65

Sat stations, programming . . . . . . . . . . .62,63

Sat system . . . . . . . . . . . . . . . . . . . . . . . .58

Scrolling by marks . . . . . . . . . . . . . . . . . . .46

Setting window . . . . . . . . . . . . . . . . . . . . .13

Signal type (EURO sockets) . . . . . . . . . . . . .49

Sleep timer . . . . . . . . . . . . . . . . . . . . . . . .38

Sound 1, sound 2 . . . . . . . . . . . . . . . . . . .14

Sound effects (see base width or spatial sound) . .71

Sound settings . . . . . . . . . . . . . . . . . . .27,28

Index

Spatial sound . . . . . . . . . . . . . . . . . . . . . .72

Standard picture settings . . . . . . . . . . . . . . .24

Standard sound values . . . . . . . . . . . . . . . .26

Standard time . . . . . . . . . . . . . . . . . . . . . .40

Standard values . . . . . . . . . . . . . . . . . .24,26

Station logos . . . . . . . . . . . . . . . . . . . . . . .21

Station search . . . . . . . . . . . . . . . . . . . .18,19

Station search, automatic . . . . . . . . . . . . . .18

Stations, deleting . . . . . . . . . . . . . . . . . . . .22

Stations, selecting . . . . . . . . . . . . . . . . . . .19

Stations, shifting . . . . . . . . . . . . . . . . . . . .22

Stations: shifting, copying and deleting . . . . .22

Stereo wide . . . . . . . . . . . . . . . . . . . . . . . .71

Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . .46

Summer time . . . . . . . . . . . . . . . . . . . . . . .40

Switching voltage, devices with . . . . . . . . . .49

Switching voltage, devices without . . . . . . . .50

Switch-off time . . . . . . . . . . . . . . . . . . . . .38

Switch-on time . . . . . . . . . . . . . . . . . . . . . .38

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Teletext, font size . . . . . . . . . . . . . . . . . . . .45

Thunderstorm . . . . . . . . . . . . . . . . . . . . . . .5

Timer control . . . . . . . . . . . . . . . . . . . . . . .38

Timer menu . . . . . . . . . . . . . . . . . . . . . . . .65

Timer recording . . . . . . . . . . . . . . . . . . . . .65

Toneburst . . . . . . . . . . . . . . . . . . . . . . . . .50

TV menu . . . . . . . . . . . . . . . . . . . . . . . . . .13

Two-stage muting . . . . . . . . . . . . . . . . . . . .31

Variable zoom . . . . . . . . . . . . . . . . . . . . .43

VCR function . . . . . . . . . . . . . . . . . . . . . . .50

Video level . . . . . . . . . . . . . . . . . . . . . . . .72

Video recorder programme position,

automatic selection . . . . . . . . . . . . . . . . . . .48

Video recorder, connecting . . . . . . . . . . .47,48

Videocassettes, playing back . . . . . . . . .49,50

Volume correction . . . . . . . . . . . . . . . . . . .28

Volume reduction function . . . . . . . . . . . . . .31

Winter time . . . . . . . . . . . . . . . . . . . . . . . .39

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Zoomautomatic . . . . . . . . . . . . . . . . . . . . .34

Codetabel

BLACK PANTHER

616

491

508

607

614

466

505

Codes Video

BLAUPUNKT

496

527

609

621

487

502

530

610

507

532

612

Metz VG61

532

VF21, VF44, VF46

VF61, VE21, VE43

VE44, VE45, VD21

VD43, VD44, VD45

VC21, VC43, VC44

VC62, 21VB11

BONDSTEC

BONDSTECBRANDT

BRANDT ELECTRONIQUE 503

574

504

505

524

BRAUN

570

450

481

466

588

BRIONVEGA

BROKSONIC

BRUNS

575

42VB12, 21VA12

21VA13, 42VA11

64VA14, 9836,9837

9847, 9874, 9875

9876, 9877

487

590

490

593

BUSH

CALIN

481

547

527

505

487

606

481

466

547

487

466

CALIX

CANDLE

CARRERA

CARVER

CGE

Metz VF22, VF47

VF48, 9843, 9844

9849

568

573

CIE

CIMLINE

CLARIVOX

CLASSIC

CLATRONIC

COLORTYME

COLT

481

487

547

Metz VH22, VH47

VH48

ACTION

ADMIRAL

ADVANTZ

ADVENTURA

ADYSON

AGHA

468

481

468

487

547

481

477

481

505

575

487

466

547

529

487

575

478

575

481

527

528

505

575

466

481

487

481

487

547

562

CONDOR

616

504

487

507

481

CONTINENTAL EDISON 503

505

547

527

CRAIG

481

487

490

575

466

505

547

CROSLEY

CROWN

CRYSTAL

CTC

547

616

AIWA

505

572

575

616

AKAI

482

508

609

483

546

612

484

554

CURTIS MATHES

CYBEREX

547

468

AKIBA

AKURA

505

588

DAEWOO

DANSAI

DAWA

DAYTRON

DE GRAAF

DECCA

DECCAVIDEO

DENON

DIGITAL

DORIC

466

487

575

466

529

528

527

477

601

547

503

530

505

468

487

553

ALBA

593

ALLORGAN

ALLSTAR

AMWAY

ANITECH

ART TECH

ASA

490

481

529

528

ASBERG

ASTRA

481

504

481

505

487

547

487

ASUKA

DTS

DUAL

ASUKA

527

ASWO

AUDIO DYNAMICS

AUDIOSONIC

AUDIOTON

AUDIOVOX

AVIS

DUEL

DUMONT

DYNATECH

616

547

583

ECONOMIC

510

487

616

487

481

547

487

481

EDISON

BAIRD

505

503

487

513

607

547

468

466

ELBE

BANG & OLUFSEN

BASIC LINE

BAUR

ELCATECH

ELECTROHOME

ELECTROPHONIC

ELIN

547

616

547

609

565

612

599

BEAUMARK

BELL & HOWELL

BESTAR

ELTA

EMERSON

616

Codetabel

EPC

505

466

487

586

604

586

510

598

616

JENSEN

JETPOINT

JVC

505

575

503

520

515

ESC

ETZUKO

EUROPHON

EXPERT

504

545

521

505

603

519

JVC_LCD

FERGUSON

501

555

487

468

477

468

481

505

574

523

595

524

596

KAISER

KAISUI

KAPSCH

KARCHER

KENDO

KENWOOD

KLH

575

487

600

575

483

468

481

487

481

487

473

FIDELITY

FINLUX

FIRST LINE

FISHER

601

477

481

473

487

478

487

528

575

505

487

FUNAI

571

KLIT

GAB

487

466

547

528

466

575

487

468

556

466

617

468

542

601

481

451

457

461

491

496

530

585

610

602

KODAK

KORPEL

KUBA

GBC

504

505

547

510

517

GEC

601

603

604

GELOSO

GITEM

GOLDHAND

GOLDSTAR

LEYCO

487

578

575

481

601

481

487

468

518

468

490

481

575

487

621

505

474

557

605

487

452

458

462

492

497

531

600

611

LIESENKOTTER

LLOYD

565

487

606

491

509

478

601

477

547

610

530

552

616

LLOYD’S

LOEWE

LOEWE OPTA

LOGIK

GOODMANS

575

527

547

483

GRAETZ

GRANADA

600

477

565

606

604

453

459

463

493

507

563

606

612

603

532

575

616

LUXOR

LXI

481

GRANDIN

GRUNDIG

MAGNADYNE

M ELECTRONICS

MAGNASONIC

MAGNAVOX

MAGNIN

MAGNUM

MANESTH

MARANTZ

MARQUANT

MARTA

575

547

470

481

581

487

491

487

481

486

562

527

468

487

547

606

477

542

487

481

466

601

454

460

464

495

527

584

609

613

481

507

547

582

487

527

547

GRUNDIG

528

490

565

566

GUTTRONIC

HANSEATIC

HANTAREX

HARLEY DAVIDSON

HARVARD

HCM

HEADQUARTER

HINARI

481

575

481

466

468

487

475

481

530

604

487

575

MATRIX

MATSUI

509

586

560

601

561

610

487

MATSUSHITA

MEDIATOR

MEMOREX

MEMPHIS

MGA

490

481

547

509

476

485

535

HINARIHITACHI

HITACHI

477

503

601

478

505

603

MGN

MINERVA

MINOLTA

MITSUBISHI

609

610

612

527

477

575

HYPSON

505

609

547

519

612

468

IMPERIAL

510

509

510

616

481

575

468

600

466

487

481

450

466

575

547

487

INGERSOL

INNO HIT

575

MULTITECH

MURPHY

481

487

INNO HIT

INTERBUY

INTERDISCOUNT

INTERFUNK

NAD

547

507

504

450

491

509

519

527

601

565

603

575

604

NATIONAL

NEC

505

469

493

510

528

576

470

496

512

541

INTERVIDEO

INTERVISION

IRRADIO

ITT

NECKERMANN

477

505

513

565

487

468

481

575

483

606

505

ITV

Codetabel

575

487

466

481

606

450

488

505

518

554

601

500

515

602

575

610

611

616

QUELLE

478

496

505

512

529

599

610

616

466

484

497

508

513

541

604

611

621

487

503

509

519

565

606

612

491

504

510

528

575

609

614

NEI

NESCO

NIKKAI

NIKKO

NOBLIKO

NOKIA

468

489

510

547

557

603

503

521

470

503

516

551

567

604

504

524

483

504

517

553

600

QUESTAR

RADIALVA

RADIOLA

RADIONETTE

RADIX

RANDEX

RANDIU

481

527

601

497

481

601

477

468

601

503

481

466

487

575

604

527

505

574

NOVATRONIC

RANK/BUSH/MURPHY

RCA

OCEANIC

OKANO

OLYMPIC

OLYMPUS

ORION

483

487

466

507

481

537

560

527

508

544

609

616

489

601

604

481

483

547

617

REALISTIC

REDIFFUSION

REX

505

509

538

561

474

512

565

610

620

531

558

589

493

513

575

611

621

536

559

591

496

541

599

612

RICOH

ROADSTAR

ROYAL

487

547

OTTO VERSAND

SABA

499

515

574

486

467

516

606

547

510

597

487

509

468

551

527

450

477

510

563

573

582

481

468

487

509

503

466

468

487

481

547

509

609

459

468

479

491

503

521

601

509

468

517

504

524

603

575

470

505

540

SABA

SAISHO

SALORA

SAMBERS

SAMEX

SAMSUNG

483

575

PAEL

606

481

507

533

623

503

547

477

606

481

529

550

568

624

491

527

481

477

505

487

547

477

487

481

468

565

PALLADIUM

PANASONIC

487

508

549

491

527

600

505

532

601

547

575

PATHE MARCONI

PAXSONIX

PENNEY

PENTAX

PERSHIN

PHILCO

505

481

SANKY

SANSUI

SANWA

SANYO

505

527

547

469

577

470

586

471

507

491

530

563

575

625

565

527

507

547

564

620

547

528

548

565

621

SBR

PHILIPS

SCHAUB LORENZ

SCHNEIDER

468

478

527

564

575

604

483

481

529

569

578

505

487

530

571

581

PHILIPS

PHILIPS (F)

PHONOLA

PILOT

575

SCOTT

SEARS

477

490

528

504

481

510

PIONEER

PRIMA

527

547

490

539

529

483

575

547

SEG

547

545

SEI-SINUDYNE

SELECO

SENTRA

SETRON

SHARP

PROFEX

PROFILE

PROSCAN

PROTEC

PULSAR

PULSER

505

481

487

544

547

481

575

SHINTOM

SHIVAKI

SHOGUN

SHORAI

SICE

547

575

PYE

QTY1

592

468

481

507

450

470

612

461

469

480

492

QUARTER

QUARTZ

QUASAR

QUELLE

SIEMENS

462

470

481

493

464

472

486

494

547

527

459

471

461

474

464

477

Codetabel

495

511

607

612

575

481

487

509

599

466

575

601

481

506

541

547

477

487

527

481

496

525

609

614

497

530

610

498

584

611

TRIAD

TRIX

575

481

466

TVA

UHER

466

505

450

565

606

547

560

481

530

606

604

477

510

616

575

609

481

543

503

SILMA

SILVA

ULTRAVOX

UMA

SINGER

SINUDYNE

547

513

575

527

616

575

601

612

604

614

UNITECH

UNITED

UNIVERSUM

SOLAVOX

SONOKO

SONOLOR

SONTEC

SONY

604

483

547

609

491

571

612

527

575

621

512

599

513

623

514

UNIVOX

VICTOR

505

466

554

547

481

545

562

SR1000

VIDEOMASTER

VIDEOPLUS

VIDEOSONIC

VIEWMARK

VIEWMAX

STS

589

547

SUNWOOD

SYLVANIA

SYMPHONIC

487

612

527

TAISHO

509

609

623

468

528

505

466

487

527

575

563

575

481

503

505

500

515

579

547

505

609

487

481

575

547

499

505

474

505

586

612

501

575

609

481

474

547

481

487

WARDS

477

575

481

487

565

TALENT

WEGAVOX

WELTBLICK

TANDBERG

TANDY

WHITE WESTINGHOUSE 450

TASHIKO

TATUNG

TEAC

529

527

WINSTON

WIZJA

WORLDVIEW

575

528

575

TEC

TECHLINE

TECHNICS

TECHNILAND

TECHNISAT

TEKNANT

TEKNIKA

TELEAVIA

TELEFUNKEN

XR1000

487

547

532

YAMISHI

YOKAN

YOKO

487

466

510

481

547

487

490

ZENITH

481

503

521

594

504

524

505

574

Codes DVD-Player

TELEORDER

TELERENT

TELESERVICE

TELETECH

TENOSAL

TENSAI

METZ

204

214

223

216

222

206

205

212

208

200

215

219

218

221

207

228

209

216

219

234

203

210

201

239

AKAI

612

CYBER HOME

DENON

GRUNDIG

HARMAN/KARDON

HITACHI

JVC

230

232

238

487

593

490

509

210

THOMAS

THOMSON

500

524

6226

482

542

604

503

574

504

594

KENWOOD

LABWAVE

LINN

231

201

THORN

501

565

606

503

575

609

LOEWE

MARANTZ

MEDION

NAD

219

236

226

THORN-FERGUSON

503

601

612

487

481

504

604

505

606

NONAME

ONKYO

PANASONIC

PHILIPS

225

TOKAI

TOSHIBA

220

235

204

227

236

233

237

505

527

PHILIPS

PIONEER

SAMSUNG

SEG

TOTEVISION

TOWADA

TOWIKA

547

490

Codetabel

SHERWOOD

SONY

TECHNICS

THOMSON

TOSHIBA

YAMAHA

224

211

216

213

202

216

MINOWA

MISSION

MTC

972

908

955

229

217

909

NAD

947

908

930

938

888

802

806

NAIM

NAKAMICHI

NOKIA

Codes HIFI - CD

NONAME

NSM

AIWA

815

856

957

929

908

909

816

857

817

872

884

921

803

807

804

861

805

AKAI

AKKAI

AMSTARD

AMSTRAD

ARCAM

ASWO

OKANO

869

819

871

827

940

976

942

956

ONKYO

881

870

911

PALLADIUM

PANASONIC

PHILIPS

810

834

833

965

824

862

923

906

908

851

915

908

866

918

909

BANG & OLUFSEN

BRAUN

BUSH

808

975

888

PIONEER

825

863

826

864

850

922

CAMBRIDGE

CAMBRIDGE AUDIO

CARVER

945

908

PMG

PROTON

DAEWOO

876

801

853

961

949

822

QUAD

908

965

DENON

812

899

962

845

900

846

901

RADIOTONE

958

911

829

910

818

RADMOR

DIORA

DUAL

REVOX

832

831

859

920

994

953

REVOX/STUDER

ROTEL

908

951

FISCHER

830

SABA

926

908

939

908

852

821

869

888

928

960

978

982

986

GOLDSTAR

GOODMANNS

GOODMANS

GRUNDIG

885

872

888

908

SAE

SAMSUNG

SANSUI

SANYO

SCHNEIDER

966

968

911

931

912

934

913

935

860

840

870

892

929

972

979

983

987

919

841

873

911

955

973

980

984

988

868

885

927

959

977

981

985

989

HARMAN KARDON

905

853

HITACHI

INTERSOUND

960

937

ITT

JVC

844

903

848

904

849

992

902

SHARP

SHERWOOD

SIEMENS

799

936

833

872

876

886

891

892

800

943

867

873

880

887

969

813

944

868

874

883

889

970

847

KENWOOD

KRELL

820

877

948

908

847

878

963

858

879

859

925

869

875

885

890

971

LINN

908

924

964

946

LUXMAN

967

SINOTEC

SINOTEC (PEPSI-DOSE) 892

METZ HE11

MARANTZ

MATSUI

882

833

908

955

908

SONY

842

896

990

888

908

843

897

991

945

893

898

895

932

908

MEDION

SUPERTECH

SYLVANIA

MERIDIAN

MAGNAVOX

MICROMEGA

T+A

882

974

Codetabel

T+A ELECTROAKUSTIK 882

OKANO

948

846

902

959

949

847

TECHNICS

809

950

954

823

916

993

917

918

ONKYO

856

901

TENSAI

THOMSON

ONKYO

960

PALLADIUM

944

928

921

853

938

943

UHER

814

869

966

995

PANASONIC

929

976

854

939

988

982

980

855

941

UNIVERSUM

872

979

908

855

952

PHILIPS

PIONEER

999

912

942

UNKNOWN

YAMAHA

828

941

854

933

RADMOR

978

860

977

REVOX

861

885

REVOX/STUDER

Codes HIFI - Tape

SAMSUNG

883

897

985

930

866

872

918

976

839

890

911

886

896

AIWA

AKAI

842

963

845

934

916

976

843

844

962

SANY

849

945

913

951

933

987

SANYO

937

867

873

919

986

868

874

947

SCHNEIDER

869

878

964

AMSTRAD

ASWO

BANG & OLUFSEN

BRAUN

BUSH

836

870

835

SHARP

SHERWOOD

864

908

923

993

909

910

DAEWOO

DENON

907

834

891

972

899

837

936

SIEMENS

879

880

947

953

964

865

967

992

881

950

954

976

925

968

882

951

955

946

952

956

840

892

841

970

971

DIORA

DUAL

900

850

SONY

935

965

969

966

991

851

985

FISCHER

893

894

998

T+A

871

961

898

T+A ELEKTROAKUSTIK 961

GOLDSTAR

GOODMANNS

GOODMANS

GRUNDIG

964

833

867

976

TECHNICS

THOMSON

838

852

981

886

859

983

895

914

979

980

UNIVERSUM

868

947

875

950

HARMAN KARDON

926

915

984

931

HITACHI

YAMAHA

857

924

858

932

ITT

918

919

Codes HIFI - Tuner

JVC

862

994

863

995

974

996

975

997

AIWA

376

734

452

469

744

427

377

737

455

745

993

464

AKAI

KENWOOD

848

957

917

958

935

990

936

993

AMSTRAD

468

ASH

LINN

888

876

889

877

ASWO

LUXMAN

884

989

BANG & OLUFSEN

369

748

METZ HE11

961

887

BUSH

MARANTZ

922

904

999

905

DAEWOO

458

371

445

461

739

372

471

NAD

903

927

920

906

DENON

423

991

424

NAKAMICHI

NOKIA

DIORA

Codetabel

DUAL

370

434

381

449

994

450

737

747

749

738

416

739

420

746

421

FISCHER

SINOTEC

SINOTEC (PEPSI-DOSE) 749

GOLDSTAR

GOODMANNS

GOODMANS

GRUNDIG

746

737

748

427

SONY

389

422

466

SUPERTECH

T+A

429

405

743

430

HARMAN KARDON

418

453

730

991

T+A ELEKTROAKUSTIK 743

HITACHI

TECHNICS

TENSAI

THOMSON

387

406

382

431

462

ITT

412

JVC

414

448

425

444

446

447

740

UHER

375

403

737

UNIVERSUM

467

415

473

435

733

454

KENWOOD

417

741

439

994

YAMAHA

385

992

LINN

472

438

LUXMAN

474

Codes HIFI - Amp

METZ HE11

MARANTZ

MINOWA

MISSION

743

450

409

426

AIWA

777

753

785

840

776

793

985

754

813

986

766

829

AKAI

AMSTRAD

831

ASH

ASWO

NOKIA

410

459

419

748

NAD

NAKAMICHI

NONAME

BANG & OLUFSEN

BRAUN

BUSH

996

960

748

782

OKANO

733

379

736

440

ONKYO

460

451

742

DAEWOO

770

751

817

835

952

DENON

789

988

790

791

PALLADIUM

PANASONIC

PHILIPS

731

371

427

383

996

735

432

450

384

997

DIORA

DUAL

981

820

995

839

PIONEER

436

998

437

999

FISCHER

750

REVOX

386

427

428

378

GRUNDIG

794

749

779

795

766

804

782

REVOX/STUDER

RADMOR

ROTEL

GOODMANNS

GOLDSTAR

HARMAN KARDON

760

751

823

SAMSUNG

411

475

433

374

391

395

399

403

409

443

733

749

373

413

426

479

463

476

990

380

392

396

400

404

412

469

735

465

473

HITACHI

SANYO

SCHNEIDER

995

388

393

397

401

407

441

470

746

ITT

827

390

394

398

402

408

442

732

748

JBL

821

792

975

816

JVC

819

818

KENWOOD

755

771

LINN

794

810

795

845

LUXMAN

954

798

955

SHARP

SHERWOOD

SIEMENS

446

456

427

480

METZ HE11

MARANTZ

MEDION

774

794

785

795

457

477

732

795

478

733

MERIDIAN

Codetabel

MINOWA

MISSION

978

799

YAMAHA

752

809

979

824

830

NOKIA

NAD

NAKAMICHI

NIAM

NONAME

826

834

822

795

782

OKANO

763

772

765

982

ONKYO

PALLADIUM

761

783

991

PALLADIUM/OKANO 764

PANASONIC

PHILIPS

805

793

797

757

957

808

794

798

758

994

795

803

795

796

992

PIONEER

PRO-LOGIC

QUAD

795

RADIOTONE

841

801

843

796

983

RADMOR

802

977

797

984

803

798

REVOX

REVOX/STUDER

ROTEL

SABA

811

828

750

763

782

786

814

842

961

965

969

973

818

825

762

768

779

785

948

786

SAMSUNG

SANYO

837

756

764

783

794

815

951

962

966

970

978

990

832

763

769

780

794

950

844

846

SCHNEIDER

768

784

812

827

953

963

967

971

779

785

813

840

956

964

968

972

SHARP

SHERWOOD

SIEMENS

833

766

770

781

800

767

775

784

947

SINOTEC

SINOTEC (PEPSI-DOSE) 786

SONY

SUPERTECH

787

782

788

974

836

991

976

T+A

774

959

806

T+A ELEKTROAKUSTIK 774

TECHNICS

805

993

958

980

TENSAI

THOMSON

UHER

987

763

963

UNIVERSUM

766

838

844

ᕢ

ᕣ

ᕤ

ᕢ

ᕣ

ᕤ

ᕥ

ᕦ

ᕧ

Service Centre

Training Centre

Administration and development

Storage/Dispatch

Mecablitz production

TV production

ᕥ

ᕧ

ᕦ

Plastics technology

Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg

Core competence in the areas of electronics and plastics

technology to form the basis of the excellent reputation of the

Metz Werke that has been built up throughout the world over

a period of many decades.

Metz offers quality made in Germany:

Consumer electronics, mecablitz flash units,

plastics technology and industrial electronics.

Metz-Werke GmbH & Co. KG

Postfach 1267, D-90506 Zirndorf

Fon: +49 911 - 97060

Fax: +49 911 - 9706340

www.metz.de

[email protected]

Errors excepted. Subject to changes.

Printed in Germany

Metz - allways first class.

KitchenAid KGCS105GSS10 User Manual
Lenovo 41A1758 User Manual
LG Electronics RH2T160 User Manual
MicroBoards Technology CopyWriter Series User Manual
Motorola MD760 User Manual
Philips 109E5 User Manual
Philips 170S5FG User Manual
Philips BDL4230E User Manual
Philips Brilliance 200WP7ES User Manual
Philips DVP5388K User Manual