connection to the ‘standard definition’ output. If
there are questions regarding our TV set
compatibility with this model 525p and 625p
DVD player, please contact our customer
service center.
1 Important
Safety and important notice
Recycle notice
Warning
• Risk of overheating! Never install the DVD player
in a confined space. Always leave a space of at least
four inches around the DVD player for ventilation.
Ensure the curtains or other objects never cover the
ventilation slots on the DVD player.
Your product is designed and manufactured
with highly quality material and components,
which can be recycled and reused. When this
crossed-out wheeled bin symbol is attached to
a product, it means the product is covered by
the European Directive 2002/96/EC.
• Never place the DVD player, remote control or
batteries near naked flames or other heat sources,
including direct sunlight.
• Only use this DVD player indoors. Keep this DVD
player away from water, moisture and liquid-filled
objects.
• Never place this DVD player on other electrical
equipment.
• Keep away from this DVD player during lightning
storms.
• Where the mains plug or an appliance coupler is
used as the disconnect device, the disconnect device
shall remain readily operable.
Never dispose of your product with other
household waste. Please inform yourself about
the local rules on the separate collection of
electrical and electronic products. The correct
disposal of your old product helps prevent
potentially negative consequences on the
environment and human health.
• Visible and invisible laser radiation when open. Avoid
exposure to beam.
This product complies with the radio
interference requirements of the European
Community. This product complies with the
requirements of the following directives and
guidelines: 2006/95/EC, 2004/108/EC.
Your product contains batteries covered by the
European Directive 2006/66/EC, which cannot
be disposed of with normal household waste.
Please inform yourself about the local rules on
separate collection of batteries. The correct
disposal of batteries helps prevent potentially
negative consequences on the environment and
human health.
About Progressive Scan
Consumers should note that not all high
definition television sets are fully compatible
with this product and may cause artifacts to be
displayed in the picture. In case of 525 or 625
progressive scan picture problems, it is
recommended that the user switch the
4
EN
Copyright notice
Windows Media and the Windows logo are
trademarks, or registered trademarks of
Microsoft Corporation in the United States and/
or other countries.
This product incorporates copyright protection
technology that is protected by method claims
of certain U.S. patents and other intellectual
property rights owned by Macrovision
Corporation and other rights owners. Use of
this copyright protection technology must be
authorised by Macrovision Corporation, and is
intended for home and other limited viewing
uses only unless otherwise authorised by
Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
DivX, DivX Ultra Certified, and associated
logos are trademarks of DivX, Inc. and are used
under license.
Official DivX® Ultra Certified product.
Plays all versions of DivX ® video (including
DivX ® 6) with enhanced playback of DivX®
media files and the DivX® Media Format.
Trademark Notice
Plays DivX® video with menus, subtitles and
audio tracks.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
The USB-IF Logos are trademarks of Universal
Serial Bus Implementers Forum, Inc.
Manufactured under license under U.S.
Patent#’s: 5,451,942; 5,956,674; 5,974,380;
5,978,762; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS and
DTS Digital Surround are registered trademarks
and the DTS logos and Symbol are trademarks
of DTS, Inc. @ 1996-2008 DTS, Inc. All Rights
Reserved.
HDMI, and HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
EN
5
Screen fit
2 Your DVD
player
Congratulations on your purchase, and
welcome to Philips! To fully benefit from the
support that Philips offers, register your product
View the movie in full screen on any TV with
this DVD player.
Hi speed USB 2.0 link
Simply plug your USB flash drive into the USB
socket to play your MP3/WMA/JPEG/DivX/
WMV files to enjoy the music play in superb
sound quality.
This DVD player offers higher picture quality
video play for an amazing viewing experience.
Media copy
You can transfer data files such as MP3, WMA
and JPEG from disc to USB flash drive.
Features highlight
Create MP3 files
Convert your favourite audio tracks from an
audio CD into MP3 format. The created MP3
files are saved in your USB flash drive.
Video upscaling to 1080p
You can now watch the DVDs in the highest
picture quality available for your HDTV. This
DVD player offers full high-definition video play
up to 1080p resolution for an amazing viewing
experience. A highly detailed picture and
increased sharpness delivers a more true-to-life
picture.
Karaoke scoring function
Karaoke scoring gives a score for each
performance. Have your singing performance
scored for even more karaoke fun at home!
EasyLink
Region codes
EasyLink uses the HDMI CEC (Consumer
Electronics Control) industry standard protocol
to share functionality with all HDMI CEC
compliant devices over HDMI. It enables the
connected devices to control each other with a
single remote control.
Your DVD player plays discs with the following
region codes.
DVD region code
Countries
Russia
Note
ALL
• EasyLink (HDMI CEC) is only applicable with certain
criteria. Terms and conditions may vary by product.
Consult your product dealer for information.
• Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
6
EN
Remote control
Product overview
1
Main unit
2
3
18
4
17
16
5
1
2
3
4
5
6
7
8
6
7
15
14
a 2 (Standby-on)
8
• Turn on the DVD player or switch to
standby mode.
13
12
9
10
b Disc compartment
11
c Z (Open/Close)
• Open or close the disc compartment.
d Display panel
e u (Play/Pause)
a 2 (Standby-On)
• Start, pause or resume disc play.
• Turn on the DVD player or switch to
standby mode.
f x (Stop)
• Press and hold to turn off the DVD
player and all HDMI CEC compliant
devices.
• Stop disc play.
g
(USB) socket
• Connect a USB flash drive.
b Z (Open/Close)
• Open or close the disc compartment.
h MIC
• Audio input from a microphone.
c DISC MENU
• Access or exit the disc menu.
• Switch to disc mode.
• For VCD/SVCD, turn PBC (Playback
Control) on or off in PBC mode.
EN
7
d v V b B (Navigation buttons)
m AUDIO/CREATE MP3
• Navigate through the menus.
• Select an audio language/channel.
• Access the menu to create MP3.
• Search fast-forward (B) or fast-
backward (b). Press repeatedly to
change the search speed.
n x (Stop)
• Stop disc play.
• Search slow-forward (v) or slow-
backward (V). Press repeatedly to
change the search speed.
o u (Play/Pause)
• Start, pause or resume disc play.
e ꢀBACK
p
INFO
• Return to the previous display menu.
• For DVD, navigate to the title menu.
• For disc, display the current status or
disc information.
• For VCD version 2.0 or SVCD with
PBC turned on, return to the menu.
• For slideshows, display a thumbnail view
of photo files.
f í/ë (Previous/Next)
q OK
• Confirm an entry or selection.
r SETUP
• Access or exit the setup menu.
• Skip to the previous or next title,
chapter, or track.
• Press and hold for fast-backward or
fast-forward search.
g
(USB)
• Switch to USB mode and display the
content.
h Numeric buttons
• Select an item to play.
i SUBTITLE
• Select DVD or DivX subtitle language.
• Access the menu to USB copy or USB
delete.
j , ZOOM
• Fit the picture format to the TV screen.
• Zoom in or out of the picture.
k VOCAL
• Change the audio channel of a karaoke
disc.
l KARAOKE
• Access or exit the karaoke menu.
8
EN
Select the best video connection that the TV can
support.
3 Connect
Make the following basic connections to use the
DVD player.
•
•
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
Option 2: Connect to component video
sockets (for a standard TV or Progressive
Scan TV).
Basic connections:
•
Option 3: Connect to video (CVBS) socket
(for a standard TV).
•
•
Video cables
Audio cables
Optional connections:
Note
•
Audio to other devices:
• Multi channel receiver
• Digital amplifier/receiver
• Analogue stereo system
• You must connect this DVD player directly to a
TV.
Option 1: Connect to HDMI socket
Note
• Refer to the type plate at the rear or bottom of the
product for identification and supply ratings.
• Before you make or change any connections, ensure
that all the devices are disconnected from the power
outlet.
HDMI IN
HDMI OUT
Tip
• Different types of connectors may be used to
connect this product to your TV, depending on
availability and your needs. A comprehensive
interactive guide to help you connect your product is
1
Connect a HDMI cable (not supplied) to
the HDMI OUT socket on this DVD
player and the HDMI input socket on the
TV.
• Use a HDMI-DVI adaptor in case the
TV has only a DVI connection.
Connect video cables
Note
Connect this DVD player to the TV to view
disc play.
• If the device supports HDMI CEC, you can control
compliant devices with a single remote control (see
chapter ‘Use Philips EasyLink’).
Tip
• This type of connections provide best picture quality.
EN
9
Option 2: Connect to component
video sockets
Option 3: Connect to video (CVBS)
socket
VIDEO IN
Pb
Pr
Pb
Y
Y
Pr
COMPONENT
VIDEO IN
COMPONENT VIDEO OUT
1
Connect a composite video cable
(supplied) to the TV OUT socket on this
DVD player and the video input socket on
the TV.
1
Connect the component video cables (not
supplied) to the Y Pb Pr sockets on this
DVD player and the component video
input sockets on the TV.
Tip
• If a progressive scan TV is used, you
may turn on the progressive scan mode
(see chapter ‘Turn on Progressive Scan’
for details).
• The video input socket on the TV may be labelled as
A/V IN, VIDEO IN, COMPOSITE or BASEBAND.
• This type of connection provides standard picture
quality.
Tip
• The component video input sockets on the TV may
be labelled as Y Pb/Cb Pr/Cr or YUV.
Connect audio cables
• This type of connection provides good picture
quality.
Connect the audio from this DVD player to the
TV to allow sound output through the TV.
AUDIO IN
FRONT L
FRONT R
1
Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R sockets on this
DVD player and the audio input sockets
on the TV.
10 EN
Connect to digital amplifier/receiver
Route audio to other devices
Route the sound from this DVD player to other
devices to enhance audio play.
DIGITAL IN
DIGITAL
OUT
COAXIAL
Connect to multi channel receiver
1
Connect a coaxial cable (not supplied) to
the COAXIAL/DIGITAL OUT socket on
this DVD player and the COAXIAL/
DIGITAL input jack on the device.
MULTI CHANNEL
AUDIO IN
ONT L
ONT R
ENTER
EAR L
Tip
EAR R BWOOFER
• You can optimise the audio output (see chapter
‘Adjust settings’ - [ Audio Setup Page ] > [ Digital
Audio Setup ]) for details.
FRONT
FRONT R
CENT
REA
REAR R SUBWOOFER
Connect to analogue stereo system
AUDIO IN
1
Connect the audio cables (not supplied) to
the AUDIO OUT (FRONT L/R, REAR
L/R, CENTER and SUBWOOFER) sockets
on this DVD player and the audio input
sockets on the device.
FRONT L
FRONT R
Tip
• You can optimise the audio output (see chapter
‘Adjust settings’ - [ Audio Setup Page ] > [ Analog
Output ]) for details.
1
Connect the audio cables (supplied) to the
AUDIO OUT FRONT L/R sockets on this
DVD player and the audio input sockets
on the device.
Tip
• You can optimise the audio output (see chapter
‘Adjust settings’ - [ Audio Setup Page ] > [ Analog
Output ]) for details.
EN 11
Connect USB device
1
Connect the USB flash drive to the
(USB) socket on this DVD player.
Note
• This DVD player can only play/view MP3, WMA,
DivX, JPEG or WMV files that are stored on such
devices.
• Press
to access the content and play the files.
Connect to power outlet
Warning
• Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the DVD player.
1
Connect the power cord to the power
outlet.
ꢁ
The DVD player is ready to be set up
for use.
12 EN
Navigate through the menu
4 Get started
1
Point the remote control directly at the
remote sensor on this DVD player and
select the desired function.
Prepare the remote control
1
2
3
Push to open the battery compartment
cover.
2
Use the following buttons on the remote
control to navigate through the on-screen
menus.
Insert two R03 or AAA batteries type with
correct polarity (+/-) as indicated.
Close the battery compartment.
Button
v V
Action
Move up or down.
Caution
Move left or right.
Confirm a selection.
Enter numbers.
b B
• Remove batteries if they are exhausted or if the
remote control is not to be used for a long time.
OK
• Do not mix batteries (old and new or carbon and
alkaline, etc.).
• Batteries contain chemical substances, they should
be disposed off properly.
EN 13
Find the correct viewing
channel
Select menu display language
Note
1
2
Press 2 to turn on the DVD player.
• You can skip this setting if this DVD player is
connected to a HDMI CEC compliant TV. It switches
automatically to the same OSD menu language as
per your TV setting.
Turn on the TV and switch to the correct
video-in channel.
• You may go to the lowest channel on
the TV, then press the Channel Down
button on the TV remote control until
you see the Video In channel.
1
2
Press SETUP.
ꢁ
[ General Setup Page ] menu is
displayed.
• You may press ° button repeatedly
Select [ OSD Language ], then press B.
on the TV remote control.
• Usually this channel is between the
lowest and highest channels and may
be called FRONT, A/V IN, VIDEO, etc..
General Setup Page
Disc Lock
OSD Language
Sleep
Auto (RUS)
ENGLISH
POLSKI
Tip
Lip Sync
Volume
РУССКИЙ
• See the TV user manual on how to select the correct
input on the TV.
Auto Standby
DivX(R) VOD Code
• If the audio output of this DVD player is routed
to other audio device (such as audio system
or receiver), turn on the audio device to the
appropriate audio input channel. Refer to the device
user manual for details.
• The language options are different
depending on your country or region.
It may not correspond to the illustration
shown here.
3
Press vV to select a language, then press
OK.
Tip
• You can set the default language for DVD audio
and disc menu, see chapter ‘Adjust settings’ - [
Preference Page ] for details.
14 EN
7
You can now turn on the progressive scan
mode on the TV (see the TV user manual).
Turn on Progressive Scan
Connect a progressive scan TV with
Note
component video sockets (see chapter
‘Connect video cables - Option 2: Connect to
component video sockets’ for details).
• The progressive scan setting will not be available
when the HDMI video signal is detected.
• During play, when progressive scan mode is on for
both this DVD player and the TV, distorted picture
may display. Turn off the progressive scan feature on
both this DVD player and the TV.
1
Turn on the TV to the correct viewing
channel for this DVD player.
2
3
Press SETUP.
Press B repeatedly to select [ Video Setup
Page ].
4
Select [ Progressive ] > [ On ], then press
OK.
ꢁ
A warning message is displayed.
Video Setup Page
TV Type
TV Display
Progressive
Picture Setting
On
Off
HD JPEG
HDMI Setup
5
To proceed, select [ OK ] and press OK.
ꢁ
The progressive setup is complete.
Note
• If a blank/distorted screen is displayed, wait for 15
seconds for the auto recover.
• If no picture displayed, turn off the progressive scan
mode as follows:
1) Press Z to open the disc compartment.
2) Press the numeric button ‘1’.
6
To exit the menu, press SETUP.
EN 15
Use Philips EasyLink
The DVD player supports Philips EasyLink,
which uses the HDMI CEC (Consumer
Electronics Control) protocol. EasyLink-
compliant devices that are connected through
HDMI connectors can be controlled by a single
remote control.
Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
1
2
Turn on the HDMI CEC operations on the
TV and other connected devices. See TVs/
devices manual for details.
You can now enjoy the following Philips
EasyLink controls.
Auto Wake Up TV (One-touch play)
When you press the STANDBY button, it turns
on the TV and this DVD player, then video disc
play starts.
•
To enable One-touch play, a video disc
must be placed in the disc compartment
before operation.
System Standby (One-touch standby)
When you press and hold the STANDBY button,
all connected HDMI CEC devices switch to
standby mode simultaneously.
Tip
• The default setting for EasyLink features is on. You
can change the default setting, see chapter ‘Adjust
settings’ - [ Video Setup Page ] > [ HDMI Setup ] > [
EasyLink ] for details.
16 EN
Tip
5 Play
• If the password entry menu is displayed, you have to
enter the password before it can be played.
• If you pause or stop a disc for about 5 minutes, the
screen saver activates. To deactivate the screen
saver, press DISC MENU.
• After you pause or stop a disc, if no buttons
are pressed within 15 minutes, this DVD player
automatically switches to standby mode.
Play from disc
Note
• DVDs and DVD players are designed with regional
restrictions. Ensure that the DVD video you play is
for the same region zone as the player (indicated on
its back).
• This DVD player can support play of the following
file formats: MP3/WMA/JPEG/DivX/WMV.
• About WMV 9 - this DVD player only supports Main
Profile (low level) and Simple Profile. Advanced
Profile and DRM-protected video files are not
supported.
• To play DVD-R, DVD+R or DVD-RW, the disc must
be finalised.
Play a disc
Caution!
• Never place any objects other than discs into the
disc compartment.
1
2
Press Z to open the disc compartment.
Insert a disc with its label facing up.
• For double-sided disc, load the side to
play faces up.
3
4
Press Z to close the disc compartment
and start disc play.
• To view disc play, turn on the TV to
the correct viewing channel for this
DVD player.
To stop disc play, press x.
EN 17
Change video play
Play video
1
2
Play a title.
Note
Use the remote control to change the
video play.
• For video disc, play always resumes from the point
where it was last stopped. To start play from the
beginning, press í while the message is displayed.
Button
AUDIO/
Action
Change audio language.
CREATE MP3
• Only applicable to discs
with multiple audio
Control a title
language or channel.
1
2
Play a title.
Change subtitle language.
SUBTITLE
Use the remote control to control the title.
• Only applicable to discs
with multiple subtitle
language.
Button
Action
Start, pause or resume disc
play.
u
Fit the picture format to the
TV screen.
, ZOOM
(Screen Fit)
Stop disc play.
x
• Press repeatedly until the
image is scaled to fit to
the TV screen.
Skip to the next title or
chapter.
ë
í
Toggle between screen
aspect ratio and different
zoom factor.
, ZOOM
Skip to the beginning of the
current title or chapter.
• To pan through the
zoomed image, press the
navigation buttons.
• Press twice to jump to the
previous title or chapter.
Searches fast-forward (M)
or fast-backward (m).
m, M
Display the current status or
disc information.
INFO
• Press repeatedly to change
the search speed.
• You can change the video
play options here without
interrupting disc play.
v, V
Searches slow-forward (v) or
slow-backward (V).
• Press repeatedly to change
the search speed.
Note
• For VCD/SVCD, slow-
backward search is not
possible.
Some operations may not work with some discs. See
•
the information accompanying the disc for details.
.
18 EN
Access DVD menu
Preview disc contents
1
2
Press DISC MENU to access disc main
menu.
1
2
During play, press
INFO.
ꢁ
The disc status menu is displayed.
Select a play option, then press OK.
Select [ Preview ], then press B.
• In some menus, press the numeric
buttons to input your selection.
DVD
• To return to the title menu during play,
press ꢀBACK.
Select Digest Type:
Title Digest
Chapter Digest
Title Interval
Access VCD menu
The PBC (Playback Control) for VCD/SVCD is
turned on by default in the factory. When you
load in a VCD/SVCD, the contents menu is
displayed.
Chapter Interval
VCD/SVCD
1
Press numeric buttons to select a play
option, then press OK to start play.
Select Digest Type:
Track Digest
Disc Interval
Track Interval
• If PBC is off, it skips the menu and starts
play from the first track.
• During play, you can press ꢀBACK to
return to the menu (if the PBC mode is
on).
3
Select a preview option, then press OK.
ꢁ
A six thumbnails preview screen is
displayed.
Tip
• To go to the next/previous preview
• The default setting for PBC is on. You can change the
default setting, see chapter ‘Adjust settings’ -
[ Preference Page ] > [ PBC ] for details.
screen, pressí/ë.
• To start play, press OK at the selected
thumbnail picture.
EN 19
Quick skip play to a specific time
View DVD play from different angles
1
2
During play, press
INFO.
1
During play, press
INFO.
ꢁ
ꢁ
The disc status menu is displayed.
The disc status menu is displayed.
Select the current elapsed playing time,
then press B.
2
3
Select [ Angle ], then press B.
Press the numeric buttons to change the
angle.
• [ TT Time ] (title time)
• [ CH Time ] (chapter time)
• [ Disc Time ] (disc time)
• [ Track Time ] (track time)
ꢁ
Play changes to the selected angle.
Note
3
Press the numeric buttons to change the
time where you want to skip to.
• Only applicable to discs contain sequences recorded
from different camera angles.
Display play time
Repeat play - video
1
2
During play, press
INFO.
ꢁ
The disc status menu is displayed.
For DVD/VCD/SVCD
Select [ Time Disp ], then press B.
1
2
3
During play, press
INFO.
ꢁ
The display options are different
depending on the disc type.
ꢁ
The disc status menu is displayed.
Select [ Repeat ] in the menu, then press
B.
Option
Action
Press vV to select a repeat option, then
press OK.
[ Title Elapsed ] Display DVD title or chapter
/ [ Chapter
Elapsed ]
elapsed play time.
[ Title Remain ] Display DVD title or chapter
Note
/ [Chapter
Remain ]
remaining play time
• For VCD/SVCD, repeat play is only possible if PBC
mode is turned off.
[ Total Elapsed Display VCD/SVCD disc or
] / [Single
Elapsed ]
track elapsed play time.
[ Total Remain Display VCD/SVCD disc or
] / [Single
Remain ]
track remaining play time.
3
Select an option, then press OK.
20 EN
Set repeat play for a specific section
Play DivX® video
DivX video is a digital media format that retains
high quality despite a high rate of compression.
This DVD player is DivX® Certified so that
you can enjoy DivX video.
1
2
3
4
During play, press
INFO.
ꢁ
The disc status menu is displayed.
Select [ Repeat AB ] in the menu, then
press OK at the start point.
1
Insert a disc or USB that contains the DivX
videos.
Press OK again to set the end point.
ꢁ
Repeat play starts.
• For USB, press
.
ꢁ
To cancel repeat play, press OK again.
A contents menu is displayed.
2
3
Select a title to play, then press OK.
Note
Use the remote control to control the
title.
• The marked section for repeat play is only possible
within a title or track.
Button
SUBTITLE
Action
Change subtitle language.
Change audio language/
channel.
AUDIO/
CREATE MP3
Stop disc play.
x
• For DivX, the contents
menu is displayed.
• For DivX Ultra video,
press this button again
to display the contents
menu.
• Display title elapsed play
time or title remaining
play time.
INFO
• Display DivX Ultra video
information.
Note
• You can only play DivX videos that were rented or
purchased with the DivX registration code of this
DVD player (see chapter ‘Adjust settings’ - [ General
Setup Page] > [ DivX(R) VOD Code ] for details).
• If the subtitle does not appear correctly, change the
subtitle language (see chapter ‘Adjust settings’ -
[ Preference Page ] > [ DivX Subtitle ] for details).
EN 21
Quick skip play
Play music
1
During play, press
the following options is selected.
INFO until one of
Note
• For some commercial audio disc, play may resume
from the point where it was last stopped. To start
Display
[ Disc Go
Action
play from first track, press í.
Skip play to a specific time
To ]
within the disc.
[ Track Go
To ]
Skip play to a specific time
within a track
Control a track
1
2
Play a track.
[ Select
Track ]
Skip play to a specific track
number.
Use the remote control to control the
track.
2
Press the numeric buttons to change the
time/number where you want to skip to.
Button
Action
Start, pause or resume disc
play.
u
Repeat play - audio
Stop disc play.
x
For audio CD
Skip to the next track.
ë
í
1
2
During play, press
until [ Off ] is selected.
INFO repeatedly
Skip to the beginning of the
current track. Press twice to
jump to the previous track.
Press b B to select a repeat option.
For MP3/WMA files
Select an item to play.
1
During play, press
repeat option.
INFO to select a
m, M
Searches fast-forward (M)
or fast-backward (m).
• Press repeatedly to change
the search speed.
22 EN
Play MP3/WMA music
Play photo
MP3/WMA is a type of highly compressed
audio file (files with .mp3, .wma extensions).
Play photos as slideshow
1
Insert a disc or USB that contains the MP3/
WMA music.
This DVD player can play JPEG photos (files
with .jpeg or .jpg extensions).
• For USB, press
.
A contents menu is displayed.
Play starts.
ꢁ
ꢁ
1
Insert a disc or USB that contains the JPEG
photos.
2
3
Select a track to play if play does not start
automatically.
• For USB, press
.
ꢁ
For a Kodak disc, the slideshow begins
automatically.
• To select another track/folder, press
vV, then press OK.
ꢁ
For a JPEG disc, the photo menu is
displayed.
To return to the main menu, press v until
the root menu is selected, then press OK.
2
Select the folder/album you want to play.
• To preview the photos in the folder/
Note
album, press
INFO.
• For CDs recorded in multiple sessions, only the first
session is played.
• This DVD player does not support MP3PRO audio
format.
• If any special characters are present in the MP3
track name (ID3) or album name, it may not display
correctly on the screen because these characters are
not supported.
• Some WMA is protected by Digital Rights
Management (DRM), it cannot be played on this
DVD player.
• Folders/files exceed the supported limit of this DVD
player are not displayed or played.
• To go to previous or next screen
Tip
display, press í/ë.
• You can display the data disc contents without
folders, see chapter ‘Adjust settings’ - [ Preference
Page ] > [ Mp3/Jpeg Nav ] for details.
• To select a photo, press the navigation
buttons.
• To display the selected photo only,
press OK.
3
Press OK to start slideshow play.
• To return to the menu, press ꢀBACK.
EN 23
Note
Play musical slideshow
• You may require longer time to display the disc
content on the TV due to the large number of songs/
photos compiled onto one disc.
Play MP3/WMA music files and JPEG photo
files simultaneously to create musical slideshow.
The MP3/WMA and JPEG files must be stored
on the same disc.
• If the JPEG photo is not recorded with an ‘exif’ type
file, the actual thumbnail picture is not be shown
on the display. It is replaced by a ‘blue mountain’
thumbnail picture.
1
2
Play MP3/WMA music.
• This DVD player can only display digital camera
pictures according to the JPEG-EXIF format, typically
used by almost all digital cameras. It cannot display
Motion JPEG and pictures in formats other than
JPEG, or sound clips associated with pictures.
Navigate to the photo folder/album and
press OK to start slideshow play.
ꢁ
Slideshow begins and continues till the
end of the photo folder or album.
• Folders/files exceed the supported limit of this DVD
player are not displayed or played.
ꢁ
Audio continues to play till the end of
the disc.
• To return to the menu, press ꢀBACK.
To stop slideshow play, press x.
Control photo play
3
4
1
2
Play photo slideshow.
To stop music play, press x again.
Use the remote control to control the
photo.
Button
Action
Rotate the photo anti-
clockwise.
b
Rotate the photo clockwise.
Flip the photo vertically.
Flip the photo horizontally.
B
v
V
Zoom in/ out.
, ZOOM
• Play pause in zoom mode.
Stop disc play.
x
24 EN
Play from USB device
This DVD player plays/views MP3, WMA, DivX
, JPEG or WMV files that are stored on USB
device.
1
2
Connect a USB flash drive to the
(USB) socket on this DVD player.
Press
.
ꢁ
A contents menu is displayed.
Play starts.
ꢁ
3
4
Select a file to play if play does not start
automatically.
• For more information, see chapters
‘Play music, Play photo, Play video’ for
details.
To stop play, press x or remove the USB
device.
• To switch to the disc mode, press
or DISC MENU.
Tip
• If the device does not fit into the USB socket,
connect it through a USB extension cable.
• Digital cameras that require additional programme
installation when connected to a PC are not
supported.
EN 25
Note
6 Advanced
features
• While you copy, never press any buttons.
• Copy-protected media cannot be copied.
Create MP3 files
Media copy
You can convert audio CDs into MP3 audio
files with this DVD player. The created MP3
audio files are saved in the USB device.
You can transfer data files such as MP3, WMA
or JPEG from disc to the USB device.
1
2
Insert an audio CD.
1
Insert a disc contains the MP3/WMA/JPEG
files.
Connect the USB flash drive to the
(USB) socket on this DVD player.
2
3
Press x to stop disc play.
3
4
During disc play, press AUDIO/CREATE
MP3.
Connect the USB flash drive to the
(USB) socket on this DVD player.
Select [ Yes ] in the menu and press OK.
4
5
Select the file to copy, then press
SUBTITLE.
Create MP3
TRACK
Track01
OPTIONS
Select [ Yes ] in the menu to start to copy,
then press OK.
04:14
04:17
03:58
04:51
03:53
04:09
04:38
Speed
Normal
128kbps
Yes
Track02
Track03
Track04
Track05
Track06
Track07
Bitrate
00:00/00:00
\MP3
005/030
CRT ID3
Device
USB 1
Previous
Summary
Track 1
Track 2
Track 3
Track 4
Track 5
Track 6
Track 7
Press [OK] button
to change speed.
Do you want
to copy this file
Select all
Start
Exit
Deselect all
Yes
No
5
Select the conversion options in the
[ OPTIONS ] panel and press OK.
ꢁ
Once complete, a new folder is created
automatically in the USB device to store
all the new data files.
6
To stop copy progress, press x, then
press OK.
26 EN
Option
Description
Select the write-to-file speed.
[ Speed ]
• If [ Normal ] speed is
selected, music play can be
heard while creating the
MP3 file.
Select the quality level.
[ Bitrate ]
Higher bitrate for better sound
quality and bigger file size.
• Default setting is [ 128
kbps ].
Copy track information into
the MP3 file.
[ CRT ID3 ]
[ Device ]
• Default setting is [ Yes ].
The created MP3 files can
only be saved in USB device.
6
7
Press B to access the [ TRACK ] panel.
Select the audio track, then press OK.
• To select another track, repeat step 7.
• To select all tracks, select [ Select all ]
in the menu and press OK.
• To deselect all tracks, select [ Deselect
all ] in the menu and press OK.
8
Select [ Start ] in the menu to start to
convert, then press OK.
ꢁ
Once complete, a new folder is created
automatically in the USB device to store
all the new MP3 files.
• To exit the menu, select [ Exit ] and
press OK.
Note
• While you convert, never press any buttons.
• DTS CDs and copy-protected CDs cannot be
converted.
• Write-protected or password-protected USB
devices cannot be used to store MP3 files.
EN 27
[ Karaoke Scoring ]: Select a karaoke rating
score level.
7 Adjust sound
• [ Off ] – no score rating display.
• [ Basic ] – basic rating.
• [ Intermediate ] – intermediate rating.
• [ Advance ] – advance rating.
Karaoke settings
Note
• If you score 30 points and above at the end of the
song, a karaoke score is displayed. Press OK to exit
and resume karaoke session.
• Karaoke score function is only available for DVD and
VCD discs.
• Set the microphone volume to the minimum level
before connecting the microphone to prevent
howling.
Turn off vocal (cancel voice)
1
2
3
Turn on the TV to the correct viewing
channel for this DVD player.
Connect a microphone (not supplied) to
MIC socket on this DVD player.
Press KARAOKE repeatedly to access
various setting options.
1
Press VOCAL repeatedly to toggle
through various audio modes or turn off
the vocal.
[ MIC ]: Press b B to turn on or off
microphone output.
[ Vol ]: Press b B to set the microphone
volume level.
Note
[ Echo ]: Press b B to set the echo level.
• You cannot cancel the voice output from MP3 discs.
[ Key ]: Press b B to set the pitch level that
match your voice.
28 EN
[ Disc Lock ]
8 Adjust settings
This section describes the various setting
options of this DVD player.
Set play restriction for a specific discs.
Before you start, place the disc in the disc
compartment (maximum 20 discs can be
locked).
• [ Lock ] – restrict access to the current
disc. The next time you want to play
this disc or unlock it, you need to enter
the password.
Note
• If the setup option is greyed out, it means the setting
cannot be changed at the current state.
• [ Unlock ] – play all discs.
Tip
• You can set or change the password, go to
[ Preference Page] > [ Password ].
General setup
1
Press SETUP.
[ OSD Language ]
ꢁ
[ General Setup Page] menu is
Select the default on-screen menu
language.
displayed.
2
Select an option, then press OK.
[ Sleep ]
Switch to standby automatically after the
preset time.
General Setup Page
Disc Lock
• [ Off ] – disable sleep mode.
OSD Language
• [ 15 Mins ], [ 30 Mins ], [ 45 Mins ],
[ 60 Mins ] – select the count down
time before the DVD player switches
to standby.
Sleep
Lip Sync
Volume
Auto Standby
DivX(R) VOD Code
[ Lip Sync ]
Set the default delay time for audio output
when you play a video disc.
3
Select a setting, then press OK.
• To return to the previous menu, press
1. Press OK.
b.
2. Press b B to set the delay time.
3. Press OK to confirm and exit.
• To exit the menu, press SETUP.
Note
• See the explanations of the above options in the
following pages.
EN 29
[ Volume ]
Audio setup
Set the default volume level when you play
a disc.
1
Press SETUP.
1. Press OK.
ꢁ
[ General Setup Page ] menu is
2. Press b B to set the volume.
3. Press OK to confirm and exit.
displayed.
2
3
Press B repeatedly to select [ Audio
Setup Page ].
[ Auto Standby ]
Turn off or on automatic standby switching
mode. It is an energy saving feature.
Select an option, then press OK.
• [ On ] – switch to standby after 15
minutes of inactivity (for example, in
pause or stop mode).
Audio Setup Page
Analog Output
Digital Audio Setup
HDMI Audio
• [ Off ] – disable auto standby mode.
Sound Mode
[ DivX(R) VOD Code ]
Speaker Setup
CD Upsampling
Night Mode
Display the DivX® registration code.
Tip
• Enter this DVD player’s DivX registration code when
The DivX videos rented or purchased through the
DivX® VOD (Video On Demand) service can be
played only on the device to which it is registered.
4
Select a setting, then press OK.
• To return to the previous menu, press
b.
• To exit the menu, press SETUP.
Note
• See the explanations of the above options in the
following pages.
30 EN
[ Analog Output ]
Note
Select the analogue audio setting based on
the audio device that is connected through
the analogue audio socket.
• [ Digital Audio Setup ] setting is only available if the
[ HDMI Audio ] is set to [ Off ].
• [ LPCM Output ] setting is only available if the
[ Digital Output ] is set to [ PCM only ].
• [ Stereo ] – for stereo output.
• The higher the sampling rate, the better the sound
quality.
• [ LT/RT ] – for surround sound output
through two speakers.
• [ Multi Channel ] – for multi channel
[ HDMI Audio ]
output.
Select the audio output setting when you
connect this DVD player and the TV with
a HDMI cable.
[ Digital Audio Setup ]
Select the setting based on the digital
amplifier/receiver that is connected
through the digital socket.
• [ On ] – audio output through the TV.
• [ Off ] – disable audio output from the
TV.
• [ Digital Output ] – select the type of
digital output.
[ Sound Mode ]
Option
[ Off ]
Description
Select a preset sound effect to enhance
the audio output.
Disable digital output.
• [ 3D ] – select a virtual surround sound
effect that is produced from the left and
right audio channels.
[ All ]
The device supports
multi-channel audio
formats.
• [ Movie Mode ] – select a sound effect
[ PCM Only ]
The device is not capable
of decoding multi-channel
audio. Audio is
downmixed to two-
channel sound: see [
LPCM Output ] setting.
for movies.
• [ Music Mode ] – select a sound effect
for music.
[ Speaker Setup ]
When you connect a speaker system, you
can optimise surround output for the
connected speakers.
• [ LPCM Output ] – select the LPCM
(Linear Pulse Code Modulation) output
sampling rate.
• [ Front Speaker ]
Option
Description
Option
[ 48k ]
Description
[ Large ]
Produce low frequency
signal below 120 Hz.
For discs recorded at
sampling rate of 48 kHz.
[ Small ]
Cannot produce low
frequency signal below
120 Hz.
[ 96k ]
For discs recorded at the
sampling rate of 96 kHz.
EN 31
• [ Center Speaker ] / [ Rear Speaker ]
• [ Speakers Delay ] – Set the delay time
for the centre, subwoofer and rear
speakers if they are placed closer to the
listening position, so that the sound
output from all speakers reach the
listening position at the same time.
Option
Description
[ Large ]
Produce low frequency
signal below 120 Hz.
[ Small ]
[ Off ]
Cannot produce low
frequency signal below
120 Hz.
1. Press OK.
2. Select a speaker, then press b B to
set the delay time.
No speaker is
connected.
3. Press OK to confirm and exit.
Note
• [ Subwoofer ]
• [ Speaker Setup ] setting is only available if you have
Option
[ On ]
Description
set the [ Analog Output ] setting to [ Multi Channel
].
A subwoofer is
connected.
[ Off ]
No subwoofer is
connected.
[ CD Upsampling ]
For better sound quality in stereo mode,
convert the music CD to a higher sampling
rate.
• [ Speakers Volume ] – Set the volume
level of each speaker to get the ideal
audio balance.
• [ Off ] – turn off CD-upsampling.
• [ 88.2kHz (X2) ] – convert to twice the
1. Press OK.
original sampling rate.
2. Select a speaker, then press b B to
adjust the volume.
• [ 176.4kHz (X4) ] – convert to four
times the original sampling rate.
3. Press OK to confirm and exit.
[ Night Mode ]
You can play DVDs with Dolby Digital
mode at a low volume, without disturbing
others. High volume output is decreased
and low volume output is increased to an
audible level.
• [ On ] – turn on night mode.
• [ Off ] – enjoy surround sound with its
full dynamic range.
32 EN
[ TV Type ]
Video setup
If the video does not appear correctly,
change the setting. By default, this setting
matches the most common setting for TVs
in your country.
1
Press SETUP.
ꢁ
[ General Setup Page ] menu is
displayed.
• [ PAL ] – for PAL-system TV.
• [ Multi ] – for TV that is compatible
2
3
Press B repeatedly to select [ Video Setup
Page ].
with both PAL and NTSC.
• [ NTSC ] – for NTSC-system TV.
Select an option, then press OK.
[ TV Display ]
Video Setup Page
Select the screen format according to how
you want the picture to appear on the TV.
TV Type
TV Display
Progressive
Picture Setting
HD JPEG
4:3 Pan Scan (PS)
4:3 Letter Box (LB)
16:9 (Wide Screen)
HDMI Setup
• [ 4:3 Pan Scan ] – for standard TV, a
full-height screen display with the sides
trimmed.
4
Select a setting, then press OK.
• [ 4:3 Letter Box ] – for standard TV, a
‘wide-screen’ display with black bars on
the top and bottom.
• To return to the previous menu, press
b.
• To exit the menu, press SETUP.
• [ 16:9 ] – for wide-screen TV (frame
ratio 16:9).
Note
[ Progressive ]
• See the explanations of the above options in the
following pages.
If a progressive scan TV is not connected
through HDMI cable, turn on progressive
scan mode.
• [ On ] – turn on progressive scan
mode.
• [ Off ] – disable progressive scan mode.
Tip
• There is more detailed description available. See
chapter ‘Get Started - Turn on Progressive Scan’ for
details.
EN 33
[ Picture Setting ]
Note
Select a predefined set of picture colour
• If the setting is not compatible with the TV, a blank
screen appears. Wait for 15 seconds for auto
recover or switch to its default mode as follows:
1) Press Z to open the disc compartment.
2) Press numeric button ‘1’.
settings or customise the personal setting.
• [ Standard ] – original colour setting.
• [ Vivid ] – vibrant colour setting.
• [ Cool ] – soft colour setting.
• [ Wide Screen Format ] – define the
• [ Personal ] – customise the colour
setting. Set the level of brightness,
contrast, sharpness and colour
saturation, then press OK.
wide screen format for disc play.
Option
Description
[ Super Wide ] Centre position of the
screen is stretched less
[ HD JPEG ]
than the side. This
Enjoy untouched and uncompressed JPEG
pictures at it’s original resolution when you
connect this DVD video player and the TV
with a HDMI cable.
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
[ 4:3 Pillar
Box ]
No stretching of the
picture. Black bars are
displayed on both sides
of the screen. This
setting is only applicable
if the video resolution is
set to 720p or 1080i/p.
• [ On ] – display high definition picture.
• [ Off ] – display standard picture.
Note
• This DVD video player supports the resolution
display of 720p and above.
[ Off ]
Note
Picture will be displayed
according to the format
of the disc.
[ HDMI Setup ]
When you connect this DVD player and
the TV with a HDMI cable, select the best
HDMI setup that the TV can support.
• This setting is only available if you have set the [ TV
Display ] setting to [ 16:9 ].
• [ Resolution ] – select a video
resolution that is compatible with the
TV display capability.
Option
Description
[ Auto ]
It detect and select
the best supported
video resolution
automatically.
[ 480p ], [ 576p ], Select a video
[ 720p ], [ 1080i ], resolution that best
[ 1080p ]
supported by the TV.
See the TVs manual
for details.
34 EN
• [ EasyLink ] – if this DVD player is
connected to HDMI CEC compliant
TV/devices, all connected devices can
respond to the following commands
simultaneously:
Preference
1
Press SETUP.
ꢁ
[ General Setup Page ] menu is
displayed.
Option
Description
[ Auto Wake
Up TV ]
When you press the
STANDBY button, it
turns on the TV and this
DVD player, then video
disc play starts (if a video
disc is found in the disc
compartment).
2
3
Press B repeatedly to select [ Preference
Page ].
Select an option, then press OK.
Preference Page
Audio
• To disable this feature,
select [ Off ].
Subtitle
Disc Menu
[ System
Standby ]
When you press and
hold the STANDBY
button, all connected
HDMI CEC devices
switch to standby mode
simultaneously.
Parental
PBC
Mp3/Jpeg Nav
Password
DivX Subtitle
4
Select a setting, then press OK.
• To disable this feature,
select [ Decline ].
• To return to the previous menu, press
b.
Note
• To exit the menu, press SETUP.
• Philips does not guarantee 100% interoperability
with all HDMI CEC compliant devices.
Note
• You must turn on the HDMI CEC operations on
the TV/devices before you can enjoy the EasyLink
controls. See the TVs/devices manual for details.
• Stop disc play before you can access to [ Preference
Page ].
• See the explanations of the above options in the
following pages.
EN 35
[ PBC ]
[ Audio ]
For VCDs/SVCDs recorded with PBC
(playback control), you can access the disc
content through an interactive menu.
Select the default audio language for
DVDs.
[ Subtitle ]
• [ On ] – an index menu is displayed
when you load a disc for play.
Select the default subtitle language for
DVDs.
• [ Off ] – skip the menu and start play
from the first track.
[ Disc Menu ]
[ Mp3/Jpeg Nav ]
Select the menu language for DVDs.
Select to display the folders or display all
the files.
Note
• If the language you have set is not available on the
disc, the disc uses its own default language.
• [ Without Menu ] – display all the files.
• [ With Menu ] – display the folders of
• For some DVDs, the subtitle/audio language can only
change from the disc menu.
MP3/WMA files.
• To select the languages that are not listed in the
menu, select [ Others ]. Then check the Language
Code list at the back of this user manual and enter
the respective language code.
Note
• This setting is not available for USB mode.
[ Password ]
[ Parental ]
Follow the instructions on the TV to set or
change the password for locked discs and
play restricted DVDs.
Restrict access to DVDs that are unsuitable
for children. These types of DVDs must be
recorded with ratings.
Preference Page
Change password
1. Press OK.
2. Select a rating level, then press OK.
3. Press the numeric buttons to enter
the password.
Old Password
New Password
Note
Confirm PWD
OK
• Rated DVDs above the level you set in [ Parental ]
require a password to be played.
• The ratings are country-dependent. To allow all discs
to play, select ‘8’.
• Some DVDs have ratings printed on them but are
not recorded with ratings. This function has no effect
on such DVDs.
1. Press the numeric buttons to enter
‘136900’ or the last set password at [
Old Password ] field.
Tip
2. Enter the new password at [ New
• You can set or change the password, go to
[ Preference Page ] > [ Password ].
Password ] field.
3. Enter the new password again at
[ Confirm PWD ] field.
4. Press OK to exit the menu.
36 EN
Note
• If you forget the password, enter ‘136900’ before
you set a new password.
[ DivX Subtitle ]
Select a character set that supports the
DivX subtitle.
[ Standard ]
English, Irish, Danish,
Estonian, Finnish, French,
German, Italian, Portuguese,
Luxembourgish, Norwegian
(Bokmål and Nynorsk),
Spanish, Swedish, Turkish
[ Cyrillic ]
Note
Belarusian, Bulgarian,
Ukrainian, Macedonian,
Russian, Serbian
• Ensure that the subtitle file has the exact same file
name as the movie file. If for example the file name
of the movie is ‘Movie.avi’, then you will need to
name the text file ‘Movie.sub’ or ‘Movie.srt’.
[ Default ]
Reset all the settings of this DVD player to
factory default, except for [ Disc Lock ],
[ Parental ] and [ Password ] settings.
EN 37
9 Additional
information
Care
Caution
• Never use solvents such as benzene, thinner,
cleaners available commercially, or anti-static sprays
intended for discs.
Update software
Clean discs
Wipe the disc with a micro fibre cleaning cloth
from the center to the edge in a straight line
movement.
To check for updates, compare the current
software version of this DVD player with the
latest software version (if available) at the
Philips website.
Caution
• Power supply must not be interrupted during
software upgrade.
1
2
3
4
Press Z to open the disc compartment.
Press numeric button ‘55’.
Write down the file name.
the upgrade instruction and the latest
software version using this file name
available for this DVD player.
5
Refer to the upgrade instructions for more
information.
Note
• Disconnect the power cord for a few seconds and
connect again to reboot the system.
38 EN
Audio performance
10 Specification
•
•
DA converter: 24 bits, 192 kHz
Frequency response:
•
•
•
DVD: 4 Hz - 22 kHz (48 kHz);
4 Hz - 44 kHz (96 kHz)
SVCD: 4 Hz - 20 kHz (44.1 kHz);
4 Hz - 22 kHz (48 kHz)
Note
• Specification and design are subject to change
without notice.
CD/VCD: 4 Hz - 20 kHz (44.1 kHz)
•
•
•
•
•
Signal-Noise (1 kHz): > 90 dB (A-weighted)
Dynamic range (1 kHz): > 80 dB (A-weighted)
Crosstalk (1 kHz): > 70 dB
Distortion/noise (1 kHz): > 65 dB
MPEG MP3: MPEG Audio L3
Accessories supplied
•
•
•
Quick Start Guide
Remote control and batteries
Audio/video cables
Audio format
•
Digital:
Playback media
•
DVD-Video, Video CD/SVCD, Audio CD, CD-R/
CD-RW, DVD+R/+RW, DVD-R/-RW, DivX-CD,
Picture CD, MP3-CD, WMA-CD, WMV-CD, USB
flash drive
•
•
MPEG/AC-3/PCM: Compressed digital (16, 20, 24
bits fs, 44.1, 48, 96 kHz)
MP3 (ISO 9660): 96, 112, 128, 256 kbps &
variable bit rate fs, 32, 44.1, 48 kHz
•
•
Analogue sound stereo
Dolby surround compatible downmix from Dolby
Digital multi-channel sound
USB
•
•
Compatibility: Hi-Speed USB (2.0)
Class support: UMS (USB Mass Storage Class)
Connections
•
•
•
•
Y Pb Pr output: Cinch 3x
TV standard
Video output: Cinch (yellow)
Audio output (Front L+R): Cinch (white/red)
Digital output:
•
Number of lines:
625 (PAL/50Hz); 525 (NTSC/60Hz)
Playback: Multi-standard (PAL/NTSC)
•
•
•
1 coaxial: IEC60958 for CDDA/LPCM;
IEC61937 for MPEG 1/2, Dolby Digital
HDMI output
5.1 channel analog output
Video performance
•
•
•
•
•
Video DAC: 12 bits, 108 MHz
Y Pb Pr: 0.7 Vpp ~ 75 ohm
Video output: 1 Vpp ~ 75 ohm
•
•
•
•
Audio Front L+R: Cinch (white/red)
Audio Rear L+R: Cinch (white/red)
Audio Centre Cinch (blue)
Video format
Audio Subwoofer: Cinch (black)
•
Digital compression:
•
•
MPEG 2: DVD/SVCD
MPEG 1: VCD/DivX
•
Horizontal resolution:
•
DVD: 720/1920 pixels (50 Hz); 720/1920 pixels
(60 Hz)
•
VCD: 352 pixels (50 Hz); 352 pixels (60 Hz)
•
Vertical resolution:
•
DVD: 576/1080 lines (50 Hz); 480/1080 lines
(60 Hz)
•
VCD: 288 lines (50 Hz); 240 lines (60 Hz)
EN 39
Main unit
•
•
Dimensions (w x h x d): 360 x 37 x 209 (mm)
Net Weight: approximately 1.3 kg
Power
•
•
•
Power supply rating: 230 V; 50 Hz
Power consumption: < 12 W
Power consumption in standby mode: < 0.3 W
Laser Specification
•
Type: Semiconductor laser InGaAIP (DVD), AIGaAs
(CD)
•
•
•
Wave length: 658 nm (DVD), 790 nm (CD)
Output Power: 7.0 mW (DVD), 10.0 mW (VCD/CD)
Beam divergence: 60 degrees
40 EN
•
If this happens when you turn on the
progressive scan setting or change the TV
system setting, you have to switch to its
default mode:
11 Troubleshooting
Warning
1. Press Z to open the disc compartment.
2. Press the numeric button ‘1’ (for
progressive scan) or the numeric
button ‘3’ (for TV System).
• Risk of electric shock. Never remove the casing of
this unit.
To keep the warranty valid, never try to repair
the system yourself.
No picture on HDMI connection.
•
Check if the HDMI cable is faulty. Replace a
new HDMI cable.
If you encounter problems when using this
DVD player, check the following points before
requesting service. If the problem remains
unsolved, register your product and get support
•
If this happens when you change the HDMI
video resolution, you have to switch to its
default mode:
1. Press Z to open the disc compartment
2. Press numeric button ‘1’.
If you contact philips, you will be asked for the
model and serial number of your DVD player.
The model number and serial number are on
the back or bottom of your DVD player. Write
the numbers here:
Sound
No sound.
Model No. __________________________
Serial No. ___________________________
•
Ensure that the audio cables are connected
and the connected device is turned on to
the correct input source.
No sound on HDMI connection.
Main unit
•
You may not hear any sound from the
HDMI output if the connected device is
non-HDCP compliant or only DVI-
compatible.
The buttons on this DVD player do not work.
•
Disconnect this DVD player from the
power outlet for a few minutes, then
connect again.
•
Ensure that the [ HDMI Audio ] setting is
turned on.
No sound during DivX movies play.
Picture
•
The audio codec may not be supported by
this DVD player.
No picture.
•
See TV manual for correct video input
channel selection. Change the TV channel
until you see the DVD screen.
EN 41
Play
DivX video files cannot be played.
•
•
Ensure that the DivX video file is complete.
Ensure that the file name extension is
correct.
The aspect ratio of the screen is not aligned
with the TV display setting.
•
The aspect ratio is fixed on the DVD.
DivX subtitle are not displayed correctly.
•
•
Ensure that the subtitle file name is the
same as the movie file name.
Select the correct character set.
1. Press SETUP.
2. Select [ Preference Page ] > [ DivX
Subtitle ] in the menu.
3. Select the character set that supports
the subtitle.
The contents of the USB flash drive cannot be
read.
•
•
The USB flash drive format is not
compatible with this DVD player.
Drive is formatted with different file system
which is not supported by this DVD player
(e.g. NTFS).
42 EN
H
12 Glossary
HDMI
High-Definition Multimedia Interface (HDMI) is
a high-speed digital interface that can transmit
uncompressed high definition video and digital
multichannel audio. It delivers high quality
picture and sound quality, completely free from
noise. HDMI is fully backward-compatible with
DVI.
A
Aspect ratio
Aspect ratio refers to the length to height ratio
of TV screens. The ratio of a standard TV is 4:3,
while the ratio of a high-definition or wide TV is
16:9. The letter box allows you to enjoy a
picture with a wider perspective on a standard
4:3 screen.
As required by the HDMI standard, connecting
to HDMI or DVI products without HDCP
(High-bandwidth Digital Content Protection)
will result in no Video or Audio output.
Auto Wake up TV
When you connect the DVD player to devices
that support one-touch play, you can control
the DVD player and the devices with one
remote control. For example, when you press
Play on the DVD remote control, the TV
automatically switches to the correct channel to
show the DVD content.
J
JPEG
A very common digital still picture format. A
still-picture data compression system proposed
by the Joint Photographic Expert Group, which
features small decrease in image quality in spite
of its high compression ratio. Files are
recognised by their file extension ‘JPG or JPEG’.
D
DivX®
The DivX code is a patent-pending, MPEG-4
based video compression technology,
developed by DivX Networks, Inc., that can
shrink digital video to sizes small enough to be
transported over the internet, while maintaining
high visual quality.
M
MP3
A file format with a sound data compression
system. ‘MP3’ is the abbreviation of Motion
Picture Experts Group 1 (or MPEG-1) Audio
Layer3. By using the MP3 format, one CD-R or
CD-RW can contain about 10 times more data
than a regular CD. Files are recognised by their
file extension ‘.MP3’.
EN 43
P
PBC
Playback Control. A system of navigating a
Video CD/Super VCD through on-screen
menus recorded onto the disc. You can enjoy
interactive play and searching.
Progressive Scan
The progressive scan displays twice the number
of frames per second than ordinary TV system.
It offers higher picture resolution and quality.
S
System standby
When you connect the DVD player to devices
that support standby, you can use DVD player
remote control to put the DVD player and all
connected HDMI devices in standby mode. You
can perform one-touch standby using the
remote control from any of the connected
HDMI devices.
W
WMA
Windows Media™ Audio. Refers to an audio
compression technology developed by
Microsoft Corporation. WMA data can be
encoded by using Windows Media Player
version 9 or Windows Media Player for
Windows XP. Files are recognised by their file
extension ‘WMA’.
WMV
A video file or stream in Windows Media
format. It is a compression format of motion
picture based on MPEG-4 developed by
Microsoft.
44 EN
45
46
Language Code
Abkhazian
Afar
Afrikaans
Amharic
6566
6565
6570
6577
6582
7289
6583
6569
6589
6590
7783
6665
6669
6678
6672
6673
7866
6683
6682
6671
7789
6983
6765
6772
6769
Inupiaq
Irish
Íslenska
Italiano
Ivrit
Japanese
Javanese
Kalaallisut
Kannada
Kashmiri
Kazakh
Kernewek
Khmer
7375
7165
7383
7384
7269
7465
7486
7576
7578
7583
7575
7587
7577
8287
7589
7586
7579
Pushto
8083
8285
8185
8277
8279
8278
8377
8371
8365
8367
8382
8378
8381
8368
8373
8373
8376
8379
8384
7882
8385
7073
8387
8383
8386
8476
8489
8471
8465
8484
8469
8472
6679
8473
8479
8483
8478
8482
8475
8487
8571
8575
8582
8590
8673
8679
8765
6789
8779
8872
8973
8979
9085
Russian
Quechua
Raeto-Romance
Romanian
Rundi
Samoan
Sango
Sanskrit
Sardinian
Serbian
Shona
Arabic
Armenian
Assamese
Avestan
Aymara
Azerhaijani
Bahasa Melayu
Bashkir
Belarusian
Bengali
Bihari
Bislama
Bokmål, Norwegian
Bosanski
Brezhoneg
Bulgarian
Burmese
Castellano, Español
Catalán
Chamorro
Chechen
Chewa; Chichewa; Nyanja7889
Shqip
Sindhi
Kinyarwanda
Kirghiz
Komi
Sinhalese
Slovensky
Slovenian
Somali
Sotho; Southern
South Ndebele
Sundanese
Suomi
Swahili
Swati
Svenska
Tagalog
Tahitian
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga (Tonga Islands)
Tsonga
Tswana
Türkçe
Turkmen
Twi
Uighur
Ukrainian
Urdu
Uzbek
Vietnamese
Volapuk
Walloon
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Korean
Kuanyama; Kwanyama 7574
Kurdish
Lao
Latina
Latvian
Letzeburgesch;
Limburgan; Limburger 7673
Lingala
Lithuanian
Luxembourgish;
Macedonian
Malagasy
Magyar
Malayalam
Maltese
Manx
Maori
Marathi
Marshallese
Moldavian
Mongolian
Nauru
Navaho; Navajo
Ndebele, North
Ndebele, South
Ndonga
Nederlands
Nepali
Norsk
Northern Sami
North Ndebele
Norwegian Nynorsk;
Occitan; Provencal
Old Bulgarian;Old Slavonic 6785
Oriya
Oromo
Ossetian; Ossetic
Pali
Panjabi
Persian
Polski
Português
7585
7679
7665
7686
7666
7678
7684
7666
7775
7771
7285
7776
7784
7186
7773
7782
7772
7779
7778
7865
7886
7868
7882
7871
7876
7869
7879
8369
7868
7878
7967
9072
9065
中文
Chuang; Zhuang
Church Slavic; Slavonic 6785
Chuvash
Corsican
Česky
6786
6779
6783
6865
6869
6890
6978
6979
6984
6985
6976
7079
7082
7089
7074
Dansk
Deutsch
Dzongkha
English
Esperanto
Estonian
Euskara
ꢀꢁꢁꢂꢃꢄꢅꢆ
Faroese
Français
Frysk
Fijian
Gaelic; Scottish Gaelic 7168
Gallegan
Georgian
Gikuyu; Kikuyu
Guarani
Gujarati
Hausa
Herero
Hindi
Hiri Motu
Hrwatski
Ido
7176
7565
7573
7178
7185
7265
7290
7273
7279
6779
7379
7982
7977
7983
8073
8065
7065
8076
8084
Interlingua (International)7365
Interlingue
Inuktitut
7365
7385
47
© 2009 Koninklijke Philips Electronics N.V.
All right reserved
sgptt_0913/51-2
|