Color Monitor
C190
User’s Guide
English
Important: Before connecting the monitor, turn off the computer and attached devices. Also
ensure the power at the electrical outlet matches the power requirements of the monitor.
Refer to the Specifications section on page 18 for more details.
Attaching the stand
1. Place the monitor face down on a soft surface to prevent the screen being scratched.
2. Insert the hook (1) into the matching slots on the underside of the monitor (2).
3. Slide the base towards the front of the monitor until the latch (3) clicks into the locked
position.
3
Connecting your monitor
1. Power off your computer and all attached devices, and unplug the computer power
cord.
2. Connect the signal cable to the video port on the back of your computer (figure A).
Your computer may have a video adapter card installed. In this case, attach the
signal cable to the connector on the video adapter card (figure B).
3. Connect the power cord to the monitor first, and then firmly insert the plug into a
properly grounded electrical outlet. Plug the computer cord into a properly grounded
electrical outlet.
4. Turn on the monitor, and then the computer.
If your monitor does not seem to be working correctly, refer to the Troubleshooting section for
help.
Workplace preparation
Positioning the monitor
Choose a suitable place to position the monitor where it is not near fluorescent desk lighting
or any equipment that produces magnetic fields that could cause interference. Ensure that the
furniture or equipment can support the weight of the monitor. Allow at least 2 inches (50mm)
ventilation space around the monitor.
4
Height
Position the monitor so that the top of the screen is slightly below your eye level when you sit
at your workstation.
Orientation
Choose a position that gives the least reflection form lights and windows, usually at a right
angle to any windows. Position the monitor directly in front of you so that you do not have to
twist your body. Tilt the monitor to a comfortable viewing angle.
Working Practices
Rest
Take regular breaks. Vary your posture, and stand up and stretch occasionally, as prolonged
use of computer workstations can be tiring.
Back
Sit back in the chair and use the backrest.
Hands
Use a light touches on the keyboard, keeping your hands and fingers relaxed. Allow a space
in front of the keyboard to rest your wrists when not typing. Consider using a wrist pad.
Eyesight
Working with monitors, in common with any prolonged close work, can be visually demanding.
Look away from the screen, periodically and have your eyesight checked regularly.
Screen settings
Set the screen brightness and contrast to a comfortable level. You may have to adjust this as
the lighting changes during the day. Many application programs let you select color
combinations, which can help you to view in comfort.
5
Caring for Monitor
Be sure to disconnect the power cord from your monitor before you perform any maintenance
on the monitor. Clean your monitor as follows:
•
Gently wipe the covers and the screen with a soft cloth, do not use solvents or
abrasives.
•
•
•
Never drop water or other liquid into your monitor.
Remove finger marks and grease with a damp cloth and mild detergent.
Never use flammable cleaning materials to clean your Lenovo monitor or any other
electrical apparatus.
•
Do not rub, touch, or tap the surface of the screen with sharp or abrasive items such
as a ballpoint pen or screwdriver. This type of contact may result in a scratched
picture tube.
•
•
Do not use any type of cleaner containing an anti-static solution or similar additive as
this may scratch the screen's coating.
Never apply detergent or other liquid directly to the screen. Dampen the cloth and
then wipe.
6
Installing the Device Driver
Installing the Device Driver for Windows 95 or Windows 98
To install the device driver in Microsoft® Windows®95 or Windows98, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature in
Windows 95 or Windows 98.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the
Windows 95 or Windows 98 operating system.
Your computer’s Plug and Play code might warn you that your system
hardware has changed. This means that it has detected your new
monitor for the first time.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double clicking on the Display icon.
5. Click the Settings tab.
If you are using Windows 95:
6. 1. Click the Change Display Type button.
2. Click the Change Monitor Type button.
• If you are using Windows 98:
6. 1. Click the Advanced button.
2. Click the Monitor tab.
3. Open the Upgrade Device Wizard window by clicking
on Change button and then select the Next button.
4. Click “Display a list of the known drivers for this device so that
I can choose a specific driver” and then select the Next button.
7. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
8. Click OK.
9. Ensure that the CD drive letter is selected, and then select “DRIVERS” folder.
10. Select ThinkVision C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
11. Close all open windows and remove the CD.
12. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
7
Installing the Device Driver for Windows 2000 or Windows Me
To install the device driver in Microsoft® Windows®2000 Professional or Microsoft Windows
Millennium Edition (Me), do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in Windows 2000 or Windows Me.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
2000 or Windows Me operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Upgrade Device Driver Wizard window by clicking on
Update Driver and then click the Next button.
11. Select “Display a list of the known drivers for this device so that I can
choose a specific driver” and then click the Next button.
12. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”
folder.
15. Select ThinkVision C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
8
Installing the device driver in Windows XP
To install the device driver in Microsoft® Windows XP, do the following:
Note: You must download files from the Lenovo Monitor CD to use the Plug and Play feature
in XP.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
XP operating system.
4. Open the Display Properties window by clicking Start, Settings,
Control Panel and then double-clicking the Display icon.
5. Click the Settings tab.
6. Click the Advanced button.
7. Click the Monitor tab.
8. Click the Properties button.
9. Click the Driver tab.
10. Open the Hardware Update Wizard window by clicking on Update Driver and then click
the Next button.
11. Select “Install from a list or Specific location (Advanced)” and then click the Next button.
12. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
13. Click OK.
14. Ensure that the CD drive letter is selected, and then select the “DRIVERS”
folder.
15. Select ThinkVision C190 CRT monitor and click OK. The files will be copied from
the CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
9
User Controls
The image is already optimised for many display modes. However, the controls can be used
to adjust the image to your linking.
OSD Key Function
Icon
Control
Description
Power switch
OSD/OK
Switches the monitor on and off.
Activates the On-Screen-Display/ Select control icon /
Save Adjustment
Move right;
Brightness adjustment
selection
Moves the highlight to the icon to the right, or on
adjustment screens increases the effect of the
adjustment.
Move left;
Contrast adjustment
selection
Moves the highlight to the icon to the left, or on
adjustment screens decrease the effect of the
adjustment.
Exit
Exit OSD control.
Hotkey Functions
Brightness and contrast can be adjusted as follows, without the need to display the OSD:
Select the function and use the buttons to adjust. If adjustment is not made within 15 seconds, the
current settings will be saved and the control screen will disappear automatically.
Icon
Control
BRIGHTNESS
Description
Adjusts the background brightness
CONTRAST
Adjusts the contrast between foreground and background
10
On-Screen-Display
Activating the On-Screen-Display
The monitor controls are accessed by pressing button to enable OSD (On-Screen-Display).
The main menu will be displayed as follows.
Each Sub-Menu icon is selected by highlighting it via the “ ” “ ” control and pressing
button “ ” to select. To exit the main or Sub-Menu then press the exit button “
”.
Main OSD menu controls
ICON
Control
Image Quality
Function instruction
Adjusts Brightness, Contrast, Moiré, and Degauss.
Image Position/Size
Image Shape
Color
Adjusts Horizontal / Vertical Position,
Horizontal/Vertical Size, Zoom and Rotation.
Adjusts Parallelogram, Trapezoid, Pincushion,
Pincushion balance, and Geometry reset.
Adjusts Preset color point, Custom, Reset User color.
Adjusts Information, Menu Languages, Accessibility,
Factory Default, Menu Position
Options
Exit
Closes the OSD menu.
OSD functions
Note: After a function is selected, use the “ ” “ ” buttons to increase or decrease the
adjustment. If the OK or Cancel button is not pushed within the menu time out period,
the current setup will be saved and the control screen will disappear automatically.
11
Image Quality
Image Quality
Sub menu
Icon
Control
Brightness
Function
Adjusts overall screen
brightness.
Sub menu function
Left
Right
Contrast
Moiré
Adjusts difference
between light and dark
areas.
Reduces elliptical
or wavy interference
patterns.
Left
Right
Horizontal
Vertical
/
/
Save
Degauss
Demagnetizes screen
Yes/No Option
to reduce image distortion.
Image Position/Size
Image
Position/Size
Sub menu
Icon
Control
Function
Sub menu function
Left
Horizontal
Position
Moves image left or right
Right
Left
Vertical Position Moves image up or down
Right
Left
Horizontal Size
Adjusts image width
Right
Left
Vertical Size
Adjusts image height
Right
Zoom
Adjusts image width and
height
Turns image clockwise or
counterclockwise.
/
/
Rotation
12
Image shape
Image Shape
Sub menu
Icon
Control
Parallelogram
Function
Leans image to the left or
right.
Sub menu function
Left
Right
Left
Trapezoid
Pincushion
Adjusts top or bottom
image width.
Right
Expands or contracts
image sides.
/
Pincushion
balance
Moves image center left or
right.
/
Geometry reset
Resets image shape to
original settings
Yes/No Option
Color
Color
Sub menu
Icon
Control
Function
Sub menu function
Preset Color
Point
Select from standard white With three choices
color 9300K / 6500K / 5500K
Custom
Adjusts red green and blue Red / Green / Blue / Save
intensity
Reset User
Color
Resets custom
color to original value
Yes / No Option
13
Options
Options
Sub menu
Icon
Control
Function
Sub menu function
Information
Shows resolution, refresh
rate, product details.
Menu Language Changes language of
menu.
English, French, Italian, German,
Spanish.
Accessibility
Changes Menu timings
Button repeat
rate
Off /Default/Slow
Option
Menu time out 5/10/15/20/25/30
second options
Factory Default
Menu Position
Resets monitor to original
settings
Yes / No Option
Adjusts menu location.
Horizontal
/
Vertical
/
Save
Exit.
Closes the OSD menu.
14
Further information
Display modes
The display mode and monitor uses are controlled by the computer. Therefore, refer to your
computer documentation for details on how to change display modes.
The image size, position and shape may change when the display mode changes. This is
normal and the image can be readjusted using the monitor controls.
To ensure flicker-free operation, select the highest (non-interlaced) refresh rate both the
computer and the monitor can support, (generally 75 Hz or higher), for the addressability that
your application requires.
For the display modes listed below, the screen image has been optimised during manufacture.
Resolution
720 x 400
Refresh Rate
70Hz
Horizontal Frequency
31.5kHz
640 x 480
60Hz
31.5kHz
640 x 480
85Hz
43.3kHz
800 x 600
75Hz
46.9kHz
800 x 600
85Hz
53.7kHz
1024 x 768
75Hz
60.0kHz
1024 x 768
85Hz
68.6kHz
1280 x 1024
1280 x 1024
1600 x 1200
Table1. Factory Preset Mode
75Hz
85Hz
75Hz
80.0kHz
91.1kHz
93.8kHz
Power Management
To benefit from power management, the monitor must be used in conjunction with a computer
that implements the Video Electronics Standards Association (VESA) Display Power
Management Signalling (DPMS) Standard.
The power management feature is invoked when the computer recognizes that you have not
used your mouse or keyboard for a user-definable period of time. There are several states as
described in the table below.
State
Power
indicator
Green
Amber
Off
Screen
Restoring Operation
On (Active)
Off (Sleep)
Switch Off
Normal
Blank
Blank
Press a key or move the mouse.
15
Troubleshooting
If you have a problem setting up or using your monitor, you may be able to solve it yourself.
Before calling your retailer or Lenovo you should try the suggested actions that are
appropriate to your problem.
Problem
Screen is blank and
power indicator is off.
Possible Cause
No power to monitor.
Suggested Action
Reference
Connecting you
•
Ensure the electrical
outlet and the monitor monitor starting
are both switched on.
Check power cord is
firmly plugged into the
monitor and the
electrical outlet.
If the power cord plug
has a removable fuse,
replace it.
on page4.
•
•
•
•
•
Try another power
cord.
Try another electrical
outlet.
Adjust brightness and
contrast.
Screen is blank and
power indicator is
steady green.
SIGNAL OUT OF
RANGE message is
displayed.
Brightness and
Contrast may be too
low.
Display mode of the
computer is outside
the range of the
monitor.
User controls
section starting
on page 10.
Further
information
section starting
on page 15.
•
•
Reconfigure the
computer to use a
supported display
mode.
Check the signal
cable is firmly
CHECK SIGNAL
CABLE message is
displayed.
Video cable
connection.
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Press any key on the
keyboard or move the
mouse to restore
operation.
Screen is blank and
power indicator is
amber.
The monitor is in
Power Management
Standby/Suspend or
Off state.
No video signal from
the computer.
•
•
Check the computer is
powered on.
Check the signal
cable is firmly
connected to the
computer.
•
•
Check no pins are
bent in the signal
cable connector.
Reconfigure the
computer to use a
non-interlaced display section starting
mode with a refresh
rate of at least 75 Hz.
Image appears to be
flickering.
The monitor is
operating in an
interlaced or low
refresh rate display
mode.
Further
information
on page 15.
16
Problem
Possible Cause
The monitor may be
affected by
interference from
nearby equipment.
Suggested Action
Reference
•
•
•
Move fluorescent
desk lighting or any
equipment that
produces magnetic
fields further away
from the monitor.
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
performance.
Move any equipment
that produces
Image appears to be
discolored.
The monitor may be
affected by
interference form
nearby equipment.
magnetic fields (For
example, sub woofer
loud speakers) further
away form the
monitor.
•
If another monitor is
close by, separate the
two monitors by at
least 300mm (12 in.)
for optimal
performance.
Magnetization of
monitor components
has built up.
Degauss the monitor using
OSD manual demagnetize
function. This function can
only be used once in a 30
minute period.
Further help
If you are unable to correct the problem yourself, you may seek further help as follows:
Call CUSTOMER SUPPORT CENTER.
In the US call 1-800-426-7378
In Canada (Toronto only) call 416-383-3344
(All other areas) call 1-800-565-3344
In other countries, contact your dealer, retailer, or other Lenovo authorized servicer.
Before calling please have available as much of the following information as possible:
1. Type, model and serial number form the label on the back of your monitor.
2. Purchase receipt.
3. Description of problem.
4. Computer type and model.
5. System configuration (additional hardware etc.).
6. System BIOS version number.
7. Operating System and version number.
8. Display driver version number.
9. Video Adapter Type
17
If possible, stay by your computer system. Your technical support representative might want
to go through the problem with you during the call.
18
Specifications
The C190 (MT6739) color monitor uses a 19-inch FFSM CRT with a viewable image size of
457.3mm (18.0 in.).
Dimensions
Width:
Depth:
Height:
Packing:
Unpacking:
Forward tilt:
Backward tilt:
Swivel:
456 mm (17.95 in.)
458 mm (18.03 in.)
468 mm (18.42 in.)
24.6 kg (54.23 lb)
21.25 kg (46.85 lb)
4.5°
Weight
Tilt Swivel
15°
+90°/-90°
Image
Maximum Height:
Maximum Width:
Dot Pitch:
Supply Voltage:
Max Supply Current:
Input Signal:
274.5 mm (10.80 in.)
365.8 mm (14.40 in.)
0.25 mm (0.0098 in.)
100-240 V ac, 60-50Hz
1.8A at 100 V ac
Analog Direct Drive,
75 ohm 0-0.7 V
1600 pels (maximum)
1200 lines (maximum)
202.5 Mhz
Power Input
Video Input
Horiz. Addressability:
Vert. Addressability:
Clock Rate
Communications
VESA DDC
2B
Synchronization Range
Horiz. Frequency:
Vert. Frequency:
Normal Operation:
Off:
30 kHz-96 kHz
50 Hz-160 Hz
<100 W
Power Consumption
(Typical)
<2 W
Environment
Operating Temperature:
Storage Temperature:
Shipping Temperature:
5 to 40 °C (41 to 104 °F)
-20 to 65 °C (-4 to 149 °F)
-20 to 65 °C (-4 to 149 °F)
Operating Humidity:
Storage Humidity:
Shipping Humidity:
Emissions:
10 to 90 %
10 to 95 %
10 to 95 %
TCO03/TCO99
19
Service Information
The following parts are for use by Lenovo Service, or Lenovo authorized dealers, to support
the customer warranty. Parts are for service use only.
Part Number
30R4978
30R4979
30R5157
30R5158
30R4981
30R4982
30R4983
30R4984
Machine type-6739
6739 Q0N
6739 P0N
Description
Two Tone Black
Business Black
Two Tone Black
Business Black
Two Tone Black
Business Black
Two Tone Black
Business Black
6739 Q0N
6739 P0N
6739 Q0E
6739 P0E
6739 Q0S
6739 P0S
30R4985
30R4986
30R5159
30R5160
30R4988
30R4989
30R4990
30R4991
30R4992
30R4993
30R4994
31P9696
31P9747
6739 Q0N
6739 P0N
6739 Q0N
6739 P0N
6739 Q0E
6739 P0E
6739 Q0S
6739 P0S
6739 F0N
6739 F0E
6739 F0S
Tilt/Swivel
Tilt/Swivel
Two Tone Black, FRU
Business Black, FRU
Two Tone Black, FRU
Business Black, FRU
Two Tone Black, FRU
Business Black, FRU
Two Tone Black, FRU
Business Black, FRU
Pearl White, FRU
Pearl White, FRU
Pearl White, FRU
Business Black, FRU
Pearl White, FRU
20
Notices and Trademarks
This section contains information on notices and trademarks.
Lenovo may not offer the products, services, or features discussed in this document in all
countries. Consult your local Lenovo representative for information on the products and
services currently available in your area. Any reference to a Lenovo product, program, or
service is not intended to state or imply that only that Lenovo product, program, or service
may be used. Any functionally equivalent product, program, or service that does not infringe
any Lenovo intellectual property right may be used instead. However, it is the user’s
responsibility to evaluate and verify the operation of any other product, program, or service.
Lenovo may have patents or pending patent applications covering subject matter described in
this document. The furnishing of this document does not give you any license to these
patents. You can send license inquiries, in writing, to:
Lenovo (United States), Inc.
500 Park Offices Drive, Hwy. 54
Research Triangle Park, NC 27709
U.S.A.
Attention: Lenovo Director of Licensing
LENOVO GROUP LTD. PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or
implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are
periodically made to the information herein; these changes will be incorporated in new
editions of the publication. Lenovo may make improvements and/or changes in the product(s)
and/or the program(s) described in this publication at any time without notice.
The products described in this document are not intended for use in implantation or other life
support applications where malfunction may result in injury or death to persons. The
information contained in this document does not affect or change Lenovo product
specifications or warranties. Nothing in this document shall operate as an express or implied
license or indemnity under the intellectual property rights of Lenovo or third parties. All
information contained in this document was obtained in specific environments and is
presented as an illustration. The result obtained in other operating environments may vary.
Lenovo may use or distribute any of the information you supply in any way it believes
appropriate without incurring any obligation to you.
Any references in this publication to non-Lenovo Web sites are provided for convenience only
and do not in any manner serve as an endorsement of those Web sites. The materials at
those Web sites are not part of the materials for this Lenovo product, and use of those Web
sites is at your own risk.
21
Any performance data contained herein was determined in a controlled environment.
Therefore, the result obtained in other operating environments may vary significantly. Some
measurements may have been made on development-level systems and there is no
guarantee that these measurements will be the same on generally available systems.
Furthermore, some measurements may have been estimated through extrapolation. Actual
results may vary. Users of this document should verify the applicable data for their specific
environment.
22
Trademarks
The following terms are trademarks of Lenovo in the United States, other countries, or both:
Lenovo
ThinkVision"
IBM is a tradeamrk of the IBM Corporation in the United States, other countries, or both
ENERGY STAR is a U.S. Govt. registered trademark.
Microsoft Windows, and Windows NT are trademarks of Microsoft
Corporation in the United States, other countries, or both.
Other company, product, and service names may be trademarks or service
marks of others.
© Copyright Lenovo 2005; portion © IBM Corp. 2004. All rights reserved.
23
|
