LG Electronics LG Life Good Computer Monitor W2486L User Manual

OWNER’S MANUAL  
LCD MONITOR  
Please read this manual carefully before operating your set and  
retain it for future reference.  
LCD MONITOR MODELS  
W2286L  
W2486L  
Important Precautions  
This unit has been engineered and manufactured to ensure your personal  
safety, however improper use may result in potential electrical shock or fire  
hazards. In order to allow the proper operation of all safeguards  
incorporated in this display, observe the following basic rules for its  
installation, use, and servicing.  
On Safety  
Use only the power cord supplied with the unit. In case you use another power  
cord, make sure that it is certified by the applicable national standards if not being  
provided by the supplier. If the power cable is faulty in any way, please contact the  
manufacturer or the nearest authorized repair service provider for a replacement.  
The appliance coupler is used as the disconnect device.  
Please make sure the device is installed near the wall outlet to which it is  
connected and that the outlet is easily accessible.  
Operate the display only from a power source indicated in the specifications of  
this manual or listed on the display. If you are not sure what type of power supply  
you have in your home, consult with your dealer.  
Overloaded AC outlets and extension cords are dangerous. So are frayed power  
cords and broken plugs. They may result in a shock or fire hazard. Call your service  
technician for replacement.  
As long as this unit is connected to the AC wall outlet, it is not disconnected from  
the AC power source even if the unit is turned off.  
Do not Open the Display:  
There are no user serviceable components inside.  
There are Dangerous High Voltages inside, even when the power is OFF.  
Contact your dealer if the display is not operating properly.  
To Avoid Personal Injury :  
Do not place the display on a sloping shelf unless properly secured.  
Use only a stand recommended by the manufacturer.  
Do not drop an object on or apply impact to the product. Do not throw any toys  
or objects on the product screen.  
It can cause injury to human, problem to product and damage the display.  
To Prevent Fire or Hazards:  
Always turn the display OFF if you leave the room for more than a short period  
of time. Never leave the display ON when leaving the house.  
Keep children from dropping or pushing objects into the display's cabinet  
openings. Some internal parts carry hazardous voltages.  
Do not add accessories that have not been designed for this display.  
When the display is to be left unattended for an extended period of time, unplug  
it from the wall outlet.  
In the presence of thunder and lightning, never touch the power cord and signal  
cable because it can be very dangerous. It can cause electric shock.  
1
Important Precautions  
On Installation  
Do not allow anything to rest upon or roll over the power cord, and do not place  
the display where the power cord is subject to damage.  
Do not use this display near water such as near a bathtub, washbowl, kitchen  
sink, laundry tub, in a wet basement, or near a swimming pool.  
Displays are provided with ventilation openings in the cabinet to allow the release  
of heat generated during operation. If these openings are blocked, built-up heat  
can cause failures which may result in a fire hazard. Therefore, NEVER:  
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.  
Place the display in a built-in enclosure unless proper ventilation is provided.  
Cover the openings with cloth or other material.  
Place the display near or over a radiator or heat source.  
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,  
mar, or damage the Active Matrix LCD permanently.  
Do not press the LCD screen with your finger for a long time as this may cause  
some afterimages.  
Some dot defects may appear as Red, Green or Blue spots on the screen.  
However, this will have no impact or effect on the display performance.  
If possible, use the recommended resolution to obtain the best image quality for  
your LCD display. If used under any mode except the recommended resolution,  
some scaled or processed images may appear on the screen. However, this is  
characteristic of the fixed-resolution LCD panel.  
Leaving a fixed image on the screen for a long time may cause damage to the  
screen and cause image burn-in. Make sure to use a screen saver on the product.  
Burn-in and related problems are not covered by the warranty on this product.  
Do not shock or scratch the front and sides of the screen with metallic objects.  
Otherwise, it may cause damage to the screen.  
Make sure the panel faces forward and hold it with both hands to move. If you  
drop the product, the damaged product can cause electric shock or fire. Contact  
an authorized the service center for repair.  
Avoid high temperatures and humidity.  
2
Important Precautions  
On Cleaning  
Unplug the display before cleaning the face of the display screen.  
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display  
screen because over-spraying may cause electrical shock.  
When cleaning the product, unplug the power cord and scrub gently with a soft  
cloth to prevent scratching. Do not clean with a wet cloth or spray water or  
other liquids directly onto the product. An electric shock may occur. (Do not use  
chemicals such as benzene, paint thinners or alcohol)  
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;  
wipe in one direction only. Too much moisture may cause staining.  
On Repacking  
Do not throw away the carton and packing materials. They make an ideal  
container in which to transport the unit. When shipping the unit to another  
location, repack it in its original material.  
On Disposal (Only, Hg lamp used LCD Monitor)  
The fluorescent lamp used in this product contains a small amount of mercury.  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of  
your local authority.  
3
Accessories  
!!! Thank for selecting LGE products !!!  
Please make sure the following items are included with your  
monitor. If any items are missing, contact your dealer.  
Power Cord  
User's Guide/Cards  
15-pin D-Sub Signal Cable  
(To set it up, this signal cable may  
be attached to this product before  
shipping out.)  
DVI-D Signal Cable  
(This feature is not available  
in all countries.)  
Cable Holder  
(This feature is not  
available in all models.)  
AC-DC adapter  
NOTE  
This accessories may look different from those shown here.  
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite  
cores to maintain standard compliance for the product.  
4
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices is turned off.  
Connecting and Disassembling the stand  
1. Place the monitor face down on the soft cloth.  
2. Assemble the Stand Base into the Stand Body in the correct direction.  
Make sure you push the Stand Base until the end.  
Stand Body  
Stand Base  
The Stand Base may  
fall and get damaged  
or cause injury.  
Good Connection  
Bad Connection  
5
Connecting the Display  
3. Turn the screw to the right to fix the Stand Body to the Stand Base.  
Screw  
Turn the screw  
by using the  
screw handle.  
4. Then fold the screw handle flat.  
5. Once assembled take the monitor up  
carefully and face the front side.  
6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and  
turn it to the left.  
IMPORTANT  
This picture depicts the general model of connection. Your monitor may differ from the items  
shown in the picture.  
Do not carry the product upside down holding only the stand base. The product may fall and  
get damaged or cause injury.  
6
Connecting the Display  
Before setting up the monitor, ensure that the power to the monitor,  
the computer system, and other attached devices is turned off.  
Positioning your display  
After installation, adjust the angle as shown below.  
1. Adjust the position of the panel in various ways for maximum comfort.  
Tilt Range : -2˚ to 15˚  
15  
-2  
Do not touch or press the screen when  
adjusting the angle of the monitor.  
When adjusting the angle of the screen, do  
not put your finger(s) in between the head of  
the monitor and the stand body. You can  
hurt your finger(s).  
ERGONOMIC  
It is recommended that in order to maintain an ergonomic and comfortable viewing position,  
the forward tilt angle of the monitor should not exceed 5 degrees.  
7
Connecting the Display  
Connecting with the PC/AV equipment  
1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and  
other attached devices is t1urned off.  
2. Connect the signal cable  
. When attached, tighten the thumbscrews to secure the  
3.cCoonnnneectciot nth.e power cable  
with the AC-DC adapter (AC-DC power supply)  
, and then  
2
3
plug the cable in the outlet.  
A
Connect DVI-D(Digital signal) Cable  
B
Connect D-sub(Analog signal) Cable  
C
Connect HDMI Cable  
NOTE  
This is a simplified representation of the rear view.  
This rear view represents a general model; your display may differ from the view as shown.  
HDMI Headphone output  
Headphones  
/ Earphones  
Varies according to model.  
Wall-outlet type  
C
B
A
(Set-Top Box, DVD,  
Video,Video Game Console)  
AV equipment  
DVI-D (This feature is not  
available in all countries.)  
* HDMI is optimized on the AV equipment.  
* Not supported PC.  
PC  
PC  
When using a D-Sub signal input cable connector for Macintosh  
Mac adapter : For Apple Macintosh use, a separate plug adapter  
is needed to change the 15 pin high density (3 row) D-sub VGA  
connector on the supplied cable to a 15 pin 2 row connector.  
8
Connecting the Display  
4. Gather the cables together and use the Cable Holder to arrange them as shown in  
the picture.  
Cable Holder  
5. Press the Power Button (  
) on the front panel to turn the power on. When monitor  
power is turned on, the 'Self Image Setting Function' is executed automatically.  
(Only for D-SUB input)  
NOTE  
‘ Self Image Setting Function’? This function provides the user with optimal display  
settings.When the user connects the monitor for the first time, this function automatically adjusts  
the display to optimal settings for individual input signals.  
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,  
screen flicker or tilted screen while using the device or after changing screen resolution, press  
the AUTO/SET function button to improve resolution.  
9
Control Panel Functions  
Front Panel Controls  
1 2 3  
4
5
6 7 8  
Button  
Use this button to enter CINEMA MODE, AUTO BRIGHT,  
TIME CONTROL, LIVE SENSOR or SMART menus.  
For more information, refer to page 16.  
Use this button to move to EZ ZOOMING, 4:3 IN WIDE and  
PHOTO EFFECT for D-SUB/DVI-D signal input.  
Button  
Use this button to move to 4:3 IN WIDE, PHOTO EFFECT  
and VOLUME for HDMI signal input.  
For more information, refer to page 17.  
Use this button to enter or exit the On Screen Display.  
MENU Button  
OSD LOCKED/UNLOCKED  
This function allows you to lock the current control  
settings, so that they cannot be inadvertently changed.  
Press and hold the MENU button for several seconds.  
The message "OSD LOCKED" should appear.  
You can unlock the OSD controls at any time by pushing  
the MENU button for several seconds. The message  
"OSD UNLOCKED" should appear.  
10  
Control Panel Functions  
Use these buttons to select or adjust functions in the On  
Screen Display.  
Buttons  
Use this function to select optimal image conditions in  
accordance with the surrounding environment  
(Brightness, Image type).  
For more information, refer to page 19.  
During initial input, the input signal connected is  
automatically recognized. Please select the desired input  
signal in the input menu, when changing the input signal.  
(SOURCE Hot key)  
AUTO/SET  
Button  
Use this button to enter a selection in the On Screen  
Display.  
AUTO IMAGE ADJUSTMENT  
When adjusting your display settings, always press the  
AUTO/SET button before entering the On Screen  
Display(OSD).(Only for D-SUB input)  
This will automatically adjust your display image to the  
ideal settings for the current screen resolution size  
(display mode).  
The best display mode is  
W2286L : 1680 x 1050  
W2486L : 1920 x 1080  
Use this button to turn the display on or off.  
Power Button  
11  
Control Panel Functions  
The power indicator stays red if the display is running  
properly (On Mode). If the display is in Sleep Mode  
(Energy Saving), the power indicator is blinking red.  
Power Indicator  
This is the sensor to measure the external brightness.  
Makes the screen brighter or darker, depending on the  
surrounding brightness, when AUTO BRIGHT is set to  
ON. The default setting is OFF.  
Light Sensor  
12  
On Screen Display (OSD) Control Adjustment  
Screen Adjustment  
Making adjustments to the image size, position and operating  
parameters of the display is quick and easy with the On Screen  
Display Control system.  
A short example is given below to familiarize you with the use of the  
controls. The following section is an outline of the available  
adjustments and selections you can make using the OSD.  
To make adjustments in the On Screen Display, follow these steps:  
Move where  
you want to  
adjust  
Select a  
menu icon  
Adjust the  
status  
Exit from the  
menu screen.  
Pops up the  
menu screen  
Press the MENU Button, then the main menu of the OSD appears.  
1
2
To access a control, use the  
or  
Buttons. When the icon you want  
becomes highlighted, press the AUTO/SET Button.  
Use the  
/
Buttons to adjust the image to the desired level.  
3
4
Use the AUTO/SET Button to select other sub-menu items.  
Press the MENU Button once to return to the main menu to select another  
function. Press the MENU Button twice to exit from the OSD.  
13  
On Screen Display(OSD) Selection and Adjustment  
The following table indicates all the On Screen Display control, adjustment,  
and setting menus.  
DSUB : D-SUB(Analog signal) input  
DVI-D : DVI-D(Digital signal) input  
HDMI  
: HDMI input  
Main menu  
Sub-menu  
Supported input  
Description  
DSUB  
DVI-D  
CINEMA  
MODE  
To focus on the moving picture  
selected  
DSUB  
DVI-D  
HDMI  
AUTO  
BRIGHT  
To control screen brightness  
automatically  
DSUB  
DVI-D  
HDMI  
TIME  
CONTROL  
To notify the user of a specified  
time  
DSUB  
DVI-D  
HDMI  
LIVE  
SENSOR  
To turn the live sensor of the  
touch button LED on or off  
DSUB  
DVI-D  
HDMI  
SMART  
To adjust the SMART button  
menus  
DSUB  
DVI-D  
EZ ZOONING  
4:3 IN WIDE  
To adjust the resolution  
To adjust the image size  
DSUB  
DVI-D  
HDMI  
DSUB  
DVI-D  
HDMI  
NORMAL  
PHOTO  
EFFECT  
To adjust the screen color mode  
GAUSSIAN BLUR  
SEPIA  
MONOCHROME  
HDMI  
VOLUME  
To adjust the headphone/  
earphone volume  
14  
On Screen Display(OSD) Selection and Adjustment  
DSUB  
F-ENGINE  
MOVIE  
INTERNET  
USER  
To select or customize desired  
image settings  
DVI-D  
NORMAL  
DEMO  
MOVIE  
HDMI  
GAME  
USER  
STANDARD  
SPORTS  
DSUB  
DVI-D  
HDMI  
BRIGHTNESS  
CONTRAST  
GAMMA  
To adjust the brightness, contrast  
and gamma of the screen  
PICTURE  
COLOR  
HDMI  
BLACK LEVEL  
PRESET  
(sRGB / 6500K / 9300K)  
DSUB  
DVI-D  
HDMI  
To customize the color of the  
screen  
RED  
GREEN  
BLUE  
HORIZONTAL  
VERTICAL  
TRACKING  
DSUB  
DSUB  
To adjust the position of the  
screen  
CLOCK  
PHASE  
To improve the clarity and  
stability of the screen  
DSUB  
DVI-D  
HDMI  
SHARPNESS  
DSUB  
DVI-D  
HDMI  
LANGUAGE  
SETUP  
To customize the screen status  
for a user's operating  
environment  
OSD POSITION  
(HORIZONTAL / VERTICAL)  
DSUB  
HDMI  
WHITE BALANCE  
OVERSCAN  
DSUB  
DVI-D  
HDMI  
RTC (Only W2286L)  
POWER INDICATOR  
FACTORY RESET  
NOTE  
The order of icons may differ depending on the model (14 to 24).  
15  
On Screen Display(OSD) Selection and Adjustment  
The OSD screen will appear when you press the  
of the monitor.  
button on the front  
MENU : Exit ,  
: Move,  
Main menu  
CINEMA MODE  
SET : Select  
Description  
To focus on the moving picture selected.  
This function adjusts the brightness of areas other than  
the user-selected area to provide an environment and  
image quality optimized for videos or moving picture on  
the web browser.  
* This function is operated only if the 'forteManag-er' is  
installed to PC.  
* HDMI input does not support.  
To control screen brightness automatically.  
AUTO BRIGHT  
When ON is selected, this function adjusts the screen  
brightness automatically, depending on the surrounding  
environment, to provide optimal viewing conditions.  
When OFF is selected, this function is turned off.  
TIME CONTROL To notify the user of a specified time.  
This function notifies the user that a user-specified time  
(1 or 2 hours) has passed, which is done by displaying  
the Alarm OSD and the LED blinking.  
Time Option: OFF/1HOUR/2HOURS  
LIVE SENSOR To turn the live sensor of the touch button LED ON or  
OFF. This function senses the users fingers and turns  
on the button LEDs before users presses the buttons,  
for easier operation.  
* LED may start to work when an electrical environment is  
formed (i.e. human body proximity).  
To adjust the SMART button menus.  
This function adjusts AUTO BRIGHT, TIME CONTROL  
and LIVE SENSOR.  
SMART  
When ON is selected, AUTO BRIGHT and LIVE  
SENSOR are turned on and TIME CONTROL is set to  
1HOUR. When OFF is selected, all these functions are  
turned off. When AUTO BRIGHT, TIME CONTROL  
and LIVE SENSOR are set individually, each setting is  
changed to USER automatically.  
16  
On Screen Display(OSD) Selection and Adjustment  
The OSD screen will appear when you press the  
of the monitor.  
button on the front  
D-SUB/DVI-D input  
MENU : Exit  
: Move  
SET : Select  
HDMI input  
Main menu  
Description  
To select the display resolution.  
EZ ZOOMING  
When you select 'EZ ZOOMING' in OSD, display  
resolution goes one step down so characters and  
images look bigger. When you select EZ ZOOMING  
once again, it goes back to the original resolution.  
* This function is operated only if the 'forteManager' is  
installed to PC.  
* HDMI input does not support.  
To select the image size of the screen.  
4:3 IN WIDE  
4:3  
WIDE  
WIDE  
: Switch to full screen mode  
according to input image signal.  
4:3  
: Change the input image signal ratio to  
4:3.  
17  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Description  
To select the color effects of the screen.  
NORMAL  
PHOTO  
EFFECT  
The PhotoEffect function is disabled.  
GAUSSIAN BLUR  
Use the AUTO/SET button  
to go to sub-menu.  
This menu changes the screen to be more  
colorful and smoother.  
SEPIA  
This menu changes the screen to be Sepia  
tone (brown color).  
MONOCHROME  
This menu changed the screen to be Gray  
tone(black-and-white Picture) .  
NORMAL  
SEPIA  
MONOCHROME  
GAUSSIAN BLUR  
* For HDMI input, the PHOTO EFFECT function may not  
work depending on the connected device.  
VOLUME  
To adjust the headphone/earphone volume.  
Press the AUTO/SET button to MUTE ON and  
press it once again to MUTE OFF.  
(Only for HDMI input)  
Use the AUTO/SET button  
to go to sub-menu.  
MUTE OFF  
MUTE ON  
18  
On Screen Display(OSD) Selection and Adjustment  
The OSD screen will appear when you touch the  
button on the left bottom  
of the monitor. These features let you easily select the best desired image condition  
optimized to the environment (ambient illumination, image types etc).  
Active state  
Inactive state  
Menu Name  
Icons  
MENU : Save & Exit  
: Move  
,
Sub-menu Name  
When F-ENGINE is executed, two kinds of tone are displayed as shown in the image. The active state  
is on the left and the inactive state is on the right side of the screen. Select the function you want and  
press the [MENU] button to save the setting.  
Main menu  
Sub menu  
Description  
MOVIE  
Select this when you are watching a video or  
movie.  
D-SUB/DVI-D input  
INTERNET Select this when you are working on the  
document (Word etc.)  
HDMI input  
GAME  
Select this when you are playing a game.  
D-SUB/DVI-D input  
Select this when you want to use the product in  
the most general using environment.  
NORMAL  
HDMI input  
Select this when you want to use the original  
standard video.  
STANDARD  
* In the General (Standard) mode, the  
is turned off.  
19  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
D-SUB/DVI-D input  
This is used for advertising in the store. The screen  
will be divided to show the standard mode on the  
left and video mode on the right so that the  
consumers can check the difference after applying  
the video mode.  
DEMO  
HDMI input  
Select this when you watching general sports.  
SPORTS  
This allows users to adjust ACE, RCM (Only for  
D-SUB/DVI-D input), HUE or SATURATION  
(Only for HDMI input).  
USER  
You can save or restore the adjusted value even  
when using a different environment.  
To adjust the USER sub-menu function,  
press the AUTO/SET Button.  
D-SUB/DVI-D input  
ACE (Adaptive Clarity Enhancer): Selects the clarity mode.  
Not applied  
Weak clarity and luminosity contrast.  
Strong clarity and luminosity contrast.  
RCM (Real Color Management): Selects the color mode.  
HDMI input  
Not applied  
Green enhance  
Flesh tone  
Color Enhance  
HUE : Adjust the screen hue.  
SATURATION: Adjusts the intensity of colors. Higher  
intensity makes colors darker while  
MENU : Exit  
: Decrease  
: Increase  
lower intensity makes colors lighter.  
: Select another sub-menu  
AUTO/SET  
20  
On Screen Display(OSD) Selection and Adjustment  
You were introduced to the procedure of selecting and adjusting an item  
using the OSD system. Listed below are the icons, icon names, and icon  
descriptions of the all items shown on the Menu.  
Press the MENU Button, then the  
main menu of the OSD appears.  
Main Menu  
MENU  
SET  
: Exit  
: Adjust (Decrease/Increase)  
: Enter  
: Select another sub-menu  
: Restart to select sub-menu  
Button  
Tip  
Menu Name  
Icons  
Sub-  
menus  
NOTE  
OSD (On Screen Display) menu languages on the monitor may differ from the manual.  
21  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
PICTURE  
D-SUB/DVI-D input  
To adjust the brightness of the screen.  
To adjust the contrast of the screen.  
BRIGHTNESS  
CONTRAST  
GAMMA  
Set your own gamma value.  
: -50 / 0 / 50  
On the monitor, high gamma values  
display whitish images and low gamma  
values display blackish images.  
HDMI input  
BLACK LEVEL You can set the offset level. If you select  
'HIGH', the screen will be bright and if  
you select LOW, the screen will be dark.  
(only for HDMI input)  
* Offset? As the criteria for video signal, it is the  
darkest screen the monitor can show.  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another  
sub-menu  
COLOR  
PRESET  
Select the screen color.  
sRGB: Set the screen color to fit  
the sRGB standard color  
specification.  
6500K: Slightly reddish white.  
9300K: Slightly bluish white.  
Set your own red color levels.  
Set your own green color levels.  
Set your own blue color levels.  
RED  
GREEN  
BLUE  
MENU : Exit  
: Decrease  
: Increase  
SET : Select another  
sub-menu  
22  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
TRACKING  
HORIZONTAL  
VERTICAL  
CLOCK  
To move image left and right.  
To move image up and down.  
To minimize any vertical bars or stripes  
visible on the screen background.  
The horizontal screen size will also  
change.  
PHASE  
To adjust the focus of the display.  
This item allows you to remove any  
horizontal noise and clear or sharpen  
the image of characters.  
MENU : Exit  
: Decrease  
: Increase  
SHARPNESS  
To adjust the clearness of the screen.  
SET : Select another  
sub-menu  
23  
On Screen Display(OSD) Selection and Adjustment  
Main menu  
Sub menu  
Description  
SETUP  
To choose the language in which the control  
names are displayed.  
LANGUAGE  
To adjust position of the OSD window on the  
screen.  
OSD  
POSITION  
If the output of the video card is different the  
required specifications, the color level may  
deteriorate due to video signal distortion. Using  
this function, the signal level is adjusted to fit into  
the standard output level of the video card in  
order to provide the optimal image.  
WHITE  
BALANCE  
D-SUB input  
Activate this function when white and black colors  
are present in the screen. (Only for D-SUB input)  
It is the function to filter out the noise which may  
be generated around the edge of the image when  
connecting the HDMI and the external device.  
When it is set to ON, the original image is  
enlarged with no noise.  
OVERSCAN  
When it is set to OFF, the original size is displayed  
as it is regardless the noise. (Only for HDMI input)  
HDMI input  
If you set ON, you enable the Response Time  
Control function and reduce the afterimage of the  
screen.  
R T C  
If you set OFF, you disenable the Response  
Time Control function and operate at panel  
response time. (Only W2286L)  
Use this function to set the power indicator on the  
front side of the monitor to ON or OFF.  
If you set OFF, it will go off.  
If you set ON at any time, the power indicator will  
automatically be turned on.  
POWER  
INDICATOR  
MENU : Exit  
: Adjust  
: Adjust  
SET : Select another  
sub-menu  
Restore all factory default settings except  
"LANGUAGE."  
FACTORY  
RESET  
Press the  
,
buttons to reset immediately.  
NOTE  
If this does not improve the screen image, restore the factory default settings. If necessary, execute the  
white balance function again. This function will be enabled only when the input is a D-SUB input.  
24  
Troubleshooting  
Check the following before calling for service.  
No image appears  
G Is the power cord of the  
Check and see if the power cord is connected  
display connected?  
properly to the power outlet.  
G Is the power indicator  
Press the Power button.  
light on?  
Adjust the brightness and the contrast.  
G Is the power on and the  
power indicator red?  
G Is the power indicator  
If the display is in power saving mode, try  
moving the mouse or pressing any key on the  
keyboard to bring up the screen.  
blinking?  
Try to turn on the PC.  
This message appears when the signal from the  
PC (video card) is out of horizontal or vertical  
frequency range of the display. See the  
'Specifications' section of this manual and  
configure your display again.  
G Do you see an "OUT OF  
RANGE" message on  
the screen?  
This message appears when the signal cable  
between your PC and your display is not  
connected. Check the signal cable and try  
again.  
G Do you see a "CHECK  
SIGNAL CABLE"  
message on the  
screen?  
Do you see a "OSD LOCKED" message on the screen?  
G
Do you see OSD  
LOCKEDwhen you  
push MENU button?  
You can secure the current control settings,  
so that they cannot be inadvertently changed.  
You can unlock the OSD controls at any time  
by pushing the MENU button for several  
seconds: the message  
OSD UNLOCKEDwill appear.  
25  
Troubleshooting  
Display image is incorrect  
G Display Position is  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, adjust the image  
position using the H position and V position  
icon in the on screen display.  
incorrect.  
G On the screen  
background, vertical  
bars or stripes are  
visible.  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
vertical bars or stripes using the CLOCK icon in  
the on screen display.  
G Any horizontal noise  
appearing in any  
image or characters  
are not clearly  
Press the AUTO/SET button to automatically  
adjust your display image to the ideal setting.  
If the results are unsatisfactory, decrease the  
horizontal bars using the PHASE icon in the on  
screen display.  
portrayed.  
Check Control Panel --> Display --> Settings  
and adjust the display to the recommended  
resolution or adjust the display image to the ideal  
setting. Set the color setting higher than 24 bits  
(true color).  
IMPORTANT  
Check Control Panel --> Display --> Settings and see if the frequency or the  
resolution were changed. If yes, readjust the video card to the recommend resolution.  
If the recommended resolution (optimal resolution) is not selected, letters may be  
blurred and the screen may be dimmed, truncated or biased. Make sure to select the  
recommend resolution.  
The setting method can differ by computer and O/S (Operation System),  
and resolution mentioned above may not be supported by the video card  
performance. In this case, please ask to the computer or the video card  
manufacturer.  
26  
Troubleshooting  
Display image is incorrect  
G The screen color is  
Check if the signal cable is properly connected  
and use a screwdriver to fasten if necessary.  
Make sure the video card is properly inserted in  
the slot.  
Set the color setting higher than 24 bits (true color)  
at Control Panel - Settings.  
mono or abnormal.  
G The screen blinks.  
Check if the screen is set to interlace mode and if  
yes, change it to the recommend resolution.  
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC)  
monitor found" message?  
G
Have you installed the  
display driver?  
Be sure to install the display driver from the display  
driver CD (or diskette) that comes with your  
display. Or, you can also download the driver from  
Make sure to check if the video card supports  
Plug&Play function.  
The Audio function is not working  
G
Picture OK & No sound.  
Check whether volume is "0".  
Check sound muted.  
HDMI cable installed properly.  
Head phone cable installed properly.  
Check sound format. Not supply to compressed  
sound format.  
27  
Specifications  
W2286L  
55.8673 cm (21.995 inch) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size: 55.8673 cm  
0.282 mm x 0.282 mm (Pixel Pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 kHz to 83 kHz (Automatic)  
56 Hz to 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green), Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector (Analog)  
DVI-D Connector (Digital)  
HDMI Connector (Digital)  
RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMI  
Max  
Recommend  
VESA 1680 x 1050 @ 60 Hz  
VESA 1680 x 1050 @ 60 Hz  
Resolution  
Plug&Play  
DDC 2B  
On Mode  
Sleep Mode  
Off Mode  
:
27 W (Typ.)  
1 W  
1 W  
Power  
Consumption  
With Stand  
Without Stand  
Width 51.97 cm (20.46 inch)  
Height 42.57 cm (16.76 inch)  
Dimensions  
& Weight  
Width 51.97 cm (20.46 inch)  
Height 43.73 cm (17.22 inch)  
Depth 19.84 cm (7.81 inch)  
Depth  
8.46 cm (3.33 inch)  
Weight(excl. packing)  
4.1 kg (9.04 lb)  
Range  
Tilt : -2˚ to 15˚  
12 V  
2.0 A  
Power Input  
AC-DC Adapter  
Lien Chang, LCAP07F  
Operating Conditions  
Temperature  
Environmental  
Conditions  
10 ˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Humidity  
Storage Conditions  
Temperature  
Humidity  
-20 ˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
28  
Specifications  
W2486L  
60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD  
Anti-Glare coating  
Display  
Visible diagonal size: 60.97 cm  
0.2767 mm x 0.2767 mm (Pixel Pitch)  
Horizontal Freq.  
Vertical Freq.  
Input Form  
30 kHz to 83 kHz (Automatic)  
56 Hz to 75 Hz (Automatic)  
Separate Sync.  
Sync Input  
Video Input  
SOG (Sync On Green), Digital  
Signal Input  
Input Form  
15 pin D-Sub Connector (Analog)  
DVI-D Connector (Digital)  
HDMI Connector (Digital)  
RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMI  
Max  
Recommend  
VESA 1920 x 1080 @ 60 Hz  
VESA 1920 x 1080 @ 60 Hz  
Resolution  
Plug&Play  
DDC 2B  
On Mode  
Sleep Mode  
Off Mode  
:
28 W (Typ.)  
1 W  
1 W  
Power  
Consumption  
With Stand  
Without Stand  
Width 57.74 cm (22.73 inch)  
Height 43.00 cm (16.93 inch)  
Dimensions  
& Weight  
Width 57.74 cm (22.73 inch)  
Height 44.05 cm (17.34 inch)  
Depth 19.84 cm (7.81 inch)  
Depth  
8.41 cm (3.31 inch)  
Weight(excl. packing)  
4.7 kg (10.36 lb)  
Range  
Tilt : -2˚ to 15˚  
12 V  
2.1 A  
Power Input  
AC-DC Adapter  
Lien Chang, LCAP07F  
Operating Conditions  
Temperature  
Environmental  
Conditions  
10 ˚C to 35 ˚C  
10 % to 80 % non-Condensing  
Humidity  
Storage Conditions  
Temperature  
Humidity  
-20 ˚C to 60 ˚C  
5 % to 90 % non-Condensing  
Attached ( ), Detached ( O )  
Wall-outlet type  
Stand Base  
Power cord  
NOTE  
Information in this document is subject to change without notice.  
29  
Specifications  
Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT  
W2286L  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
9
720 X 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1680 x 1050  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
63.981  
79.976  
64.674  
65.290  
VGA  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
60  
60  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
10  
11  
*12  
*Recommend Mode  
W2486L  
Display Modes (Resolution)  
Horizontal Freq. (kHz)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
9
10  
11  
12  
*13  
720 X 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
1680 x 1050  
1680 x 1050  
1920 x 1080  
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
63.981  
79.976  
64.674  
65.290  
67.500  
VGA  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
60  
60  
60  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
*Recommend Mode  
30  
Specifications  
HDMI Vedio INPUT  
Horizontal Freq. (kHz)  
Display Modes (Resolution)  
Vertical Freq. (Hz)  
1
2
3
4
5
6
7
8
31.50  
31.25  
37.50  
45.00  
28.12  
33.75  
56.25  
67.50  
480p  
576p  
720p  
60  
50  
50  
60  
50  
60  
50  
60  
720p  
1080i  
1080i  
1080p  
1080p  
Indicator  
LED Color  
MODE  
On Mode  
Red  
Red Blinking  
Off  
Sleep Mode  
Off Mode  
31  

Intel D845HV User Manual
Intel E7520 User Manual
JVC CRT Television AV 36320 User Manual
LG Electronics 32 3DCH UA User Manual
LG Electronics LG Life Good Computer Monitor AVS2400 User Manual
NEC Electronics America Cordless Telephone N 1093092 User Manual
NEC R 37 Xtra User Manual
Palsonic TFTV680S User Manual
Philips 20RF50S User Manual
Philips DFU DEC2008 User Manual