OWNER’S MANUAL
LCD MONITOR
Please read this manual carefully before operating your set and
retain it for future reference.
LCD MONITOR MODELS
W2286L
W2486L
Important Precautions
This unit has been engineered and manufactured to ensure your personal
safety, however improper use may result in potential electrical shock or fire
hazards. In order to allow the proper operation of all safeguards
incorporated in this display, observe the following basic rules for its
installation, use, and servicing.
On Safety
Use only the power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
manufacturer or the nearest authorized repair service provider for a replacement.
The appliance coupler is used as the disconnect device.
Please make sure the device is installed near the wall outlet to which it is
connected and that the outlet is easily accessible.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords are dangerous. So are frayed power
cords and broken plugs. They may result in a shock or fire hazard. Call your service
technician for replacement.
As long as this unit is connected to the AC wall outlet, it is not disconnected from
the AC power source even if the unit is turned off.
Do not Open the Display:
There are no user serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
To Avoid Personal Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
Do not drop an object on or apply impact to the product. Do not throw any toys
or objects on the product screen.
It can cause injury to human, problem to product and damage the display.
To Prevent Fire or Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
When the display is to be left unattended for an extended period of time, unplug
it from the wall outlet.
In the presence of thunder and lightning, never touch the power cord and signal
cable because it can be very dangerous. It can cause electric shock.
1
Important Precautions
On Installation
Do not allow anything to rest upon or roll over the power cord, and do not place
the display where the power cord is subject to damage.
Do not use this display near water such as near a bathtub, washbowl, kitchen
sink, laundry tub, in a wet basement, or near a swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
can cause failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub or strike the Active Matrix LCD with anything hard as this may scratch,
mar, or damage the Active Matrix LCD permanently.
Do not press the LCD screen with your finger for a long time as this may cause
some afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
Leaving a fixed image on the screen for a long time may cause damage to the
screen and cause image burn-in. Make sure to use a screen saver on the product.
Burn-in and related problems are not covered by the warranty on this product.
Do not shock or scratch the front and sides of the screen with metallic objects.
Otherwise, it may cause damage to the screen.
Make sure the panel faces forward and hold it with both hands to move. If you
drop the product, the damaged product can cause electric shock or fire. Contact
an authorized the service center for repair.
Avoid high temperatures and humidity.
2
Important Precautions
On Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly on the display
screen because over-spraying may cause electrical shock.
When cleaning the product, unplug the power cord and scrub gently with a soft
cloth to prevent scratching. Do not clean with a wet cloth or spray water or
other liquids directly onto the product. An electric shock may occur. (Do not use
chemicals such as benzene, paint thinners or alcohol)
Spray water onto a soft cloth 2 to 4 times, and use it to clean the front frame;
wipe in one direction only. Too much moisture may cause staining.
On Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
On Disposal (Only, Hg lamp used LCD Monitor)
The fluorescent lamp used in this product contains a small amount of mercury.
Do not dispose of this product with general household waste.
Disposal of this product must be carried out in accordance to the regulations of
your local authority.
3
Accessories
!!! Thank for selecting LGE products !!!
Please make sure the following items are included with your
monitor. If any items are missing, contact your dealer.
Power Cord
User's Guide/Cards
15-pin D-Sub Signal Cable
(To set it up, this signal cable may
be attached to this product before
shipping out.)
DVI-D Signal Cable
(This feature is not available
in all countries.)
Cable Holder
(This feature is not
available in all models.)
AC-DC adapter
NOTE
This accessories may look different from those shown here.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI-D cable) with ferrite
cores to maintain standard compliance for the product.
4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Connecting and Disassembling the stand
1. Place the monitor face down on the soft cloth.
2. Assemble the Stand Base into the Stand Body in the correct direction.
Make sure you push the Stand Base until the end.
Stand Body
Stand Base
The Stand Base may
fall and get damaged
or cause injury.
Good Connection
Bad Connection
5
Connecting the Display
3. Turn the screw to the right to fix the Stand Body to the Stand Base.
Screw
Turn the screw
by using the
screw handle.
4. Then fold the screw handle flat.
5. Once assembled take the monitor up
carefully and face the front side.
6. To disconnect the Stand Base from the Stand Body, unfold the screw handle and
turn it to the left.
IMPORTANT
This picture depicts the general model of connection. Your monitor may differ from the items
shown in the picture.
Do not carry the product upside down holding only the stand base. The product may fall and
get damaged or cause injury.
6
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor,
the computer system, and other attached devices is turned off.
Positioning your display
After installation, adjust the angle as shown below.
1. Adjust the position of the panel in various ways for maximum comfort.
Tilt Range : -2˚ to 15˚
15
-2
Do not touch or press the screen when
adjusting the angle of the monitor.
When adjusting the angle of the screen, do
not put your finger(s) in between the head of
the monitor and the stand body. You can
hurt your finger(s).
ERGONOMIC
It is recommended that in order to maintain an ergonomic and comfortable viewing position,
the forward tilt angle of the monitor should not exceed 5 degrees.
7
Connecting the Display
Connecting with the PC/AV equipment
1. Before setting up the monitor, ensure that the power to the monitor, the computer system, and
other attached devices is t1urned off.
2. Connect the signal cable
. When attached, tighten the thumbscrews to secure the
3.cCoonnnneectciot nth.e power cable
with the AC-DC adapter (AC-DC power supply)
, and then
2
3
plug the cable in the outlet.
A
Connect DVI-D(Digital signal) Cable
B
Connect D-sub(Analog signal) Cable
C
Connect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
HDMI Headphone output
Headphones
/ Earphones
Varies according to model.
Wall-outlet type
C
B
A
(Set-Top Box, DVD,
Video,Video Game Console)
AV equipment
DVI-D (This feature is not
available in all countries.)
* HDMI is optimized on the AV equipment.
* Not supported PC.
PC
PC
When using a D-Sub signal input cable connector for Macintosh
Mac adapter : For Apple Macintosh use, a separate plug adapter
is needed to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
8
Connecting the Display
4. Gather the cables together and use the Cable Holder to arrange them as shown in
the picture.
Cable Holder
5. Press the Power Button (
) on the front panel to turn the power on. When monitor
power is turned on, the 'Self Image Setting Function' is executed automatically.
(Only for D-SUB input)
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display
settings.When the user connects the monitor for the first time, this function automatically adjusts
the display to optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters,
screen flicker or tilted screen while using the device or after changing screen resolution, press
the AUTO/SET function button to improve resolution.
9
Control Panel Functions
Front Panel Controls
1 2 3
4
5
6 7 8
Button
Use this button to enter CINEMA MODE, AUTO BRIGHT,
TIME CONTROL, LIVE SENSOR or SMART menus.
For more information, refer to page 16.
Use this button to move to EZ ZOOMING, 4:3 IN WIDE and
PHOTO EFFECT for D-SUB/DVI-D signal input.
Button
Use this button to move to 4:3 IN WIDE, PHOTO EFFECT
and VOLUME for HDMI signal input.
For more information, refer to page 17.
Use this button to enter or exit the On Screen Display.
MENU Button
OSD LOCKED/UNLOCKED
This function allows you to lock the current control
settings, so that they cannot be inadvertently changed.
Press and hold the MENU button for several seconds.
The message "OSD LOCKED" should appear.
You can unlock the OSD controls at any time by pushing
the MENU button for several seconds. The message
"OSD UNLOCKED" should appear.
10
Control Panel Functions
Use these buttons to select or adjust functions in the On
Screen Display.
Buttons
Use this function to select optimal image conditions in
accordance with the surrounding environment
(Brightness, Image type).
For more information, refer to page 19.
During initial input, the input signal connected is
automatically recognized. Please select the desired input
signal in the input menu, when changing the input signal.
(SOURCE Hot key)
AUTO/SET
Button
Use this button to enter a selection in the On Screen
Display.
AUTO IMAGE ADJUSTMENT
When adjusting your display settings, always press the
AUTO/SET button before entering the On Screen
Display(OSD).(Only for D-SUB input)
This will automatically adjust your display image to the
ideal settings for the current screen resolution size
(display mode).
The best display mode is
W2286L : 1680 x 1050
W2486L : 1920 x 1080
Use this button to turn the display on or off.
Power Button
11
Control Panel Functions
The power indicator stays red if the display is running
properly (On Mode). If the display is in Sleep Mode
(Energy Saving), the power indicator is blinking red.
Power Indicator
This is the sensor to measure the external brightness.
Makes the screen brighter or darker, depending on the
surrounding brightness, when AUTO BRIGHT is set to
ON. The default setting is OFF.
Light Sensor
12
On Screen Display (OSD) Control Adjustment
Screen Adjustment
Making adjustments to the image size, position and operating
parameters of the display is quick and easy with the On Screen
Display Control system.
A short example is given below to familiarize you with the use of the
controls. The following section is an outline of the available
adjustments and selections you can make using the OSD.
To make adjustments in the On Screen Display, follow these steps:
Move where
you want to
adjust
Select a
menu icon
Adjust the
status
Exit from the
menu screen.
Pops up the
menu screen
Press the MENU Button, then the main menu of the OSD appears.
1
2
To access a control, use the
or
Buttons. When the icon you want
becomes highlighted, press the AUTO/SET Button.
Use the
/
Buttons to adjust the image to the desired level.
3
4
Use the AUTO/SET Button to select other sub-menu items.
Press the MENU Button once to return to the main menu to select another
function. Press the MENU Button twice to exit from the OSD.
13
On Screen Display(OSD) Selection and Adjustment
The following table indicates all the On Screen Display control, adjustment,
and setting menus.
DSUB : D-SUB(Analog signal) input
DVI-D : DVI-D(Digital signal) input
HDMI
: HDMI input
Main menu
Sub-menu
Supported input
Description
DSUB
DVI-D
CINEMA
MODE
To focus on the moving picture
selected
DSUB
DVI-D
HDMI
AUTO
BRIGHT
To control screen brightness
automatically
DSUB
DVI-D
HDMI
TIME
CONTROL
To notify the user of a specified
time
DSUB
DVI-D
HDMI
LIVE
SENSOR
To turn the live sensor of the
touch button LED on or off
DSUB
DVI-D
HDMI
SMART
To adjust the SMART button
menus
DSUB
DVI-D
EZ ZOONING
4:3 IN WIDE
To adjust the resolution
To adjust the image size
DSUB
DVI-D
HDMI
DSUB
DVI-D
HDMI
NORMAL
PHOTO
EFFECT
To adjust the screen color mode
GAUSSIAN BLUR
SEPIA
MONOCHROME
HDMI
VOLUME
To adjust the headphone/
earphone volume
14
On Screen Display(OSD) Selection and Adjustment
DSUB
F-ENGINE
MOVIE
INTERNET
USER
To select or customize desired
image settings
DVI-D
NORMAL
DEMO
MOVIE
HDMI
GAME
USER
STANDARD
SPORTS
DSUB
DVI-D
HDMI
BRIGHTNESS
CONTRAST
GAMMA
To adjust the brightness, contrast
and gamma of the screen
PICTURE
COLOR
HDMI
BLACK LEVEL
PRESET
(sRGB / 6500K / 9300K)
DSUB
DVI-D
HDMI
To customize the color of the
screen
RED
GREEN
BLUE
HORIZONTAL
VERTICAL
TRACKING
DSUB
DSUB
To adjust the position of the
screen
CLOCK
PHASE
To improve the clarity and
stability of the screen
DSUB
DVI-D
HDMI
SHARPNESS
DSUB
DVI-D
HDMI
LANGUAGE
SETUP
To customize the screen status
for a user's operating
environment
OSD POSITION
(HORIZONTAL / VERTICAL)
DSUB
HDMI
WHITE BALANCE
OVERSCAN
DSUB
DVI-D
HDMI
RTC (Only W2286L)
POWER INDICATOR
FACTORY RESET
NOTE
The order of icons may differ depending on the model (14 to 24).
15
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
of the monitor.
button on the front
MENU : Exit ,
: Move,
Main menu
CINEMA MODE
SET : Select
Description
To focus on the moving picture selected.
This function adjusts the brightness of areas other than
the user-selected area to provide an environment and
image quality optimized for videos or moving picture on
the web browser.
* This function is operated only if the 'forteManag-er' is
installed to PC.
* HDMI input does not support.
To control screen brightness automatically.
AUTO BRIGHT
When ON is selected, this function adjusts the screen
brightness automatically, depending on the surrounding
environment, to provide optimal viewing conditions.
When OFF is selected, this function is turned off.
TIME CONTROL To notify the user of a specified time.
This function notifies the user that a user-specified time
(1 or 2 hours) has passed, which is done by displaying
the Alarm OSD and the LED blinking.
Time Option: OFF/1HOUR/2HOURS
LIVE SENSOR To turn the live sensor of the touch button LED ON or
OFF. This function senses the user’s fingers and turns
on the button LEDs before users presses the buttons,
for easier operation.
* LED may start to work when an electrical environment is
formed (i.e. human body proximity).
To adjust the SMART button menus.
This function adjusts AUTO BRIGHT, TIME CONTROL
and LIVE SENSOR.
SMART
When ON is selected, AUTO BRIGHT and LIVE
SENSOR are turned on and TIME CONTROL is set to
1HOUR. When OFF is selected, all these functions are
turned off. When AUTO BRIGHT, TIME CONTROL
and LIVE SENSOR are set individually, each setting is
changed to USER automatically.
16
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you press the
of the monitor.
button on the front
D-SUB/DVI-D input
MENU : Exit
: Move
SET : Select
HDMI input
Main menu
Description
To select the display resolution.
EZ ZOOMING
When you select 'EZ ZOOMING' in OSD, display
resolution goes one step down so characters and
images look bigger. When you select EZ ZOOMING
once again, it goes back to the original resolution.
* This function is operated only if the 'forteManager' is
installed to PC.
* HDMI input does not support.
To select the image size of the screen.
4:3 IN WIDE
4:3
WIDE
• WIDE
: Switch to full screen mode
according to input image signal.
• 4:3
: Change the input image signal ratio to
4:3.
17
On Screen Display(OSD) Selection and Adjustment
Main menu
Description
To select the color effects of the screen.
• NORMAL
PHOTO
EFFECT
The PhotoEffect function is disabled.
• GAUSSIAN BLUR
Use the AUTO/SET button
to go to sub-menu.
This menu changes the screen to be more
colorful and smoother.
• SEPIA
This menu changes the screen to be Sepia
tone (brown color).
• MONOCHROME
This menu changed the screen to be Gray
tone(black-and-white Picture) .
NORMAL
SEPIA
MONOCHROME
GAUSSIAN BLUR
* For HDMI input, the PHOTO EFFECT function may not
work depending on the connected device.
VOLUME
To adjust the headphone/earphone volume.
Press the AUTO/SET button to MUTE ON and
press it once again to MUTE OFF.
(Only for HDMI input)
Use the AUTO/SET button
to go to sub-menu.
MUTE OFF
MUTE ON
18
On Screen Display(OSD) Selection and Adjustment
The OSD screen will appear when you touch the
button on the left bottom
of the monitor. These features let you easily select the best desired image condition
optimized to the environment (ambient illumination, image types etc).
Active state
Inactive state
Menu Name
Icons
MENU : Save & Exit
: Move
,
Sub-menu Name
When F-ENGINE is executed, two kinds of tone are displayed as shown in the image. The active state
is on the left and the inactive state is on the right side of the screen. Select the function you want and
press the [MENU] button to save the setting.
Main menu
Sub menu
Description
MOVIE
Select this when you are watching a video or
movie.
D-SUB/DVI-D input
INTERNET Select this when you are working on the
document (Word etc.)
HDMI input
GAME
Select this when you are playing a game.
D-SUB/DVI-D input
Select this when you want to use the product in
the most general using environment.
NORMAL
HDMI input
Select this when you want to use the original
standard video.
STANDARD
* In the General (Standard) mode, the
is turned off.
19
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
D-SUB/DVI-D input
This is used for advertising in the store. The screen
will be divided to show the standard mode on the
left and video mode on the right so that the
consumers can check the difference after applying
the video mode.
DEMO
HDMI input
Select this when you watching general sports.
SPORTS
This allows users to adjust ACE, RCM (Only for
D-SUB/DVI-D input), HUE or SATURATION
(Only for HDMI input).
USER
You can save or restore the adjusted value even
when using a different environment.
To adjust the USER sub-menu function,
press the AUTO/SET Button.
D-SUB/DVI-D input
• ACE (Adaptive Clarity Enhancer): Selects the clarity mode.
Not applied
Weak clarity and luminosity contrast.
Strong clarity and luminosity contrast.
• RCM (Real Color Management): Selects the color mode.
HDMI input
Not applied
Green enhance
Flesh tone
Color Enhance
• HUE : Adjust the screen hue.
• SATURATION: Adjusts the intensity of colors. Higher
intensity makes colors darker while
MENU : Exit
: Decrease
: Increase
lower intensity makes colors lighter.
: Select another sub-menu
AUTO/SET
20
On Screen Display(OSD) Selection and Adjustment
You were introduced to the procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
Press the MENU Button, then the
main menu of the OSD appears.
Main Menu
MENU
SET
: Exit
: Adjust (Decrease/Increase)
: Enter
: Select another sub-menu
: Restart to select sub-menu
Button
Tip
Menu Name
Icons
Sub-
menus
NOTE
OSD (On Screen Display) menu languages on the monitor may differ from the manual.
21
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
PICTURE
D-SUB/DVI-D input
To adjust the brightness of the screen.
To adjust the contrast of the screen.
BRIGHTNESS
CONTRAST
GAMMA
Set your own gamma value.
: -50 / 0 / 50
On the monitor, high gamma values
display whitish images and low gamma
values display blackish images.
HDMI input
BLACK LEVEL You can set the offset level. If you select
'HIGH', the screen will be bright and if
you select ‘LOW’, the screen will be dark.
(only for HDMI input)
* Offset? As the criteria for video signal, it is the
darkest screen the monitor can show.
MENU : Exit
: Decrease
: Increase
SET : Select another
sub-menu
COLOR
PRESET
Select the screen color.
• sRGB: Set the screen color to fit
the sRGB standard color
specification.
• 6500K: Slightly reddish white.
• 9300K: Slightly bluish white.
Set your own red color levels.
Set your own green color levels.
Set your own blue color levels.
RED
GREEN
BLUE
MENU : Exit
: Decrease
: Increase
SET : Select another
sub-menu
22
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
TRACKING
HORIZONTAL
VERTICAL
CLOCK
To move image left and right.
To move image up and down.
To minimize any vertical bars or stripes
visible on the screen background.
The horizontal screen size will also
change.
PHASE
To adjust the focus of the display.
This item allows you to remove any
horizontal noise and clear or sharpen
the image of characters.
MENU : Exit
: Decrease
: Increase
SHARPNESS
To adjust the clearness of the screen.
SET : Select another
sub-menu
23
On Screen Display(OSD) Selection and Adjustment
Main menu
Sub menu
Description
SETUP
To choose the language in which the control
names are displayed.
LANGUAGE
To adjust position of the OSD window on the
screen.
OSD
POSITION
If the output of the video card is different the
required specifications, the color level may
deteriorate due to video signal distortion. Using
this function, the signal level is adjusted to fit into
the standard output level of the video card in
order to provide the optimal image.
WHITE
BALANCE
D-SUB input
Activate this function when white and black colors
are present in the screen. (Only for D-SUB input)
It is the function to filter out the noise which may
be generated around the edge of the image when
connecting the HDMI and the external device.
When it is set to ON, the original image is
enlarged with no noise.
OVERSCAN
When it is set to OFF, the original size is displayed
as it is regardless the noise. (Only for HDMI input)
HDMI input
If you set ON, you enable the Response Time
Control function and reduce the afterimage of the
screen.
R T C
If you set OFF, you disenable the Response
Time Control function and operate at panel
response time. (Only W2286L)
Use this function to set the power indicator on the
front side of the monitor to ON or OFF.
If you set OFF, it will go off.
If you set ON at any time, the power indicator will
automatically be turned on.
POWER
INDICATOR
MENU : Exit
: Adjust
: Adjust
SET : Select another
sub-menu
Restore all factory default settings except
"LANGUAGE."
FACTORY
RESET
Press the
,
buttons to reset immediately.
NOTE
If this does not improve the screen image, restore the factory default settings. If necessary, execute the
white balance function again. This function will be enabled only when the input is a D-SUB input.
24
Troubleshooting
Check the following before calling for service.
No image appears
G Is the power cord of the
• Check and see if the power cord is connected
display connected?
properly to the power outlet.
G Is the power indicator
• Press the Power button.
light on?
• Adjust the brightness and the contrast.
G Is the power on and the
power indicator red?
G Is the power indicator
• If the display is in power saving mode, try
moving the mouse or pressing any key on the
keyboard to bring up the screen.
blinking?
• Try to turn on the PC.
• This message appears when the signal from the
PC (video card) is out of horizontal or vertical
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
G Do you see an "OUT OF
RANGE" message on
the screen?
• This message appears when the signal cable
between your PC and your display is not
connected. Check the signal cable and try
again.
G Do you see a "CHECK
SIGNAL CABLE"
message on the
screen?
Do you see a "OSD LOCKED" message on the screen?
G
Do you see “OSD
LOCKED” when you
push MENU button?
• You can secure the current control settings,
so that they cannot be inadvertently changed.
You can unlock the OSD controls at any time
by pushing the MENU button for several
seconds: the message
“OSD UNLOCKED” will appear.
25
Troubleshooting
Display image is incorrect
G Display Position is
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position
icon in the on screen display.
incorrect.
G On the screen
background, vertical
bars or stripes are
visible.
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in
the on screen display.
G Any horizontal noise
appearing in any
image or characters
are not clearly
• Press the AUTO/SET button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
portrayed.
• Check Control Panel --> Display --> Settings
and adjust the display to the recommended
resolution or adjust the display image to the ideal
setting. Set the color setting higher than 24 bits
(true color).
IMPORTANT
Check Control Panel --> Display --> Settings and see if the frequency or the
resolution were changed. If yes, readjust the video card to the recommend resolution.
If the recommended resolution (optimal resolution) is not selected, letters may be
blurred and the screen may be dimmed, truncated or biased. Make sure to select the
recommend resolution.
The setting method can differ by computer and O/S (Operation System),
and resolution mentioned above may not be supported by the video card
performance. In this case, please ask to the computer or the video card
manufacturer.
26
Troubleshooting
Display image is incorrect
G The screen color is
•
•
•
Check if the signal cable is properly connected
and use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in
the slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
mono or abnormal.
G The screen blinks.
•
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Do you see an "Unrecognized monitor, Plug&Play (VESA DDC)
monitor found" message?
G
Have you installed the
display driver?
•
Be sure to install the display driver from the display
driver CD (or diskette) that comes with your
display. Or, you can also download the driver from
•
Make sure to check if the video card supports
Plug&Play function.
The Audio function is not working
G
Picture OK & No sound.
• Check whether volume is "0".
• Check sound muted.
• HDMI cable installed properly.
• Head phone cable installed properly.
• Check sound format. Not supply to compressed
sound format.
27
Specifications
W2286L
55.8673 cm (21.995 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size: 55.8673 cm
0.282 mm x 0.282 mm (Pixel Pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 kHz to 83 kHz (Automatic)
56 Hz to 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green), Digital
Signal Input
Input Form
15 pin D-Sub Connector (Analog)
DVI-D Connector (Digital)
HDMI Connector (Digital)
RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMI
Max
Recommend
VESA 1680 x 1050 @ 60 Hz
VESA 1680 x 1050 @ 60 Hz
Resolution
Plug&Play
DDC 2B
On Mode
Sleep Mode
Off Mode
:
≤
≤
27 W (Typ.)
1 W
1 W
Power
Consumption
With Stand
Without Stand
Width 51.97 cm (20.46 inch)
Height 42.57 cm (16.76 inch)
Dimensions
& Weight
Width 51.97 cm (20.46 inch)
Height 43.73 cm (17.22 inch)
Depth 19.84 cm (7.81 inch)
Depth
8.46 cm (3.33 inch)
Weight(excl. packing)
4.1 kg (9.04 lb)
Range
Tilt : -2˚ to 15˚
12 V
2.0 A
Power Input
AC-DC Adapter
Lien Chang, LCAP07F
Operating Conditions
Temperature
Environmental
Conditions
10 ˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature
Humidity
-20 ˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
28
Specifications
W2486L
60.97 cm (24 inch) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Display
Visible diagonal size: 60.97 cm
0.2767 mm x 0.2767 mm (Pixel Pitch)
Horizontal Freq.
Vertical Freq.
Input Form
30 kHz to 83 kHz (Automatic)
56 Hz to 75 Hz (Automatic)
Separate Sync.
Sync Input
Video Input
SOG (Sync On Green), Digital
Signal Input
Input Form
15 pin D-Sub Connector (Analog)
DVI-D Connector (Digital)
HDMI Connector (Digital)
RGB Analog (0.7 Vp-p / 75 ohm), Digital, HDMI
Max
Recommend
VESA 1920 x 1080 @ 60 Hz
VESA 1920 x 1080 @ 60 Hz
Resolution
Plug&Play
DDC 2B
On Mode
Sleep Mode
Off Mode
:
≤
≤
28 W (Typ.)
1 W
1 W
Power
Consumption
With Stand
Without Stand
Width 57.74 cm (22.73 inch)
Height 43.00 cm (16.93 inch)
Dimensions
& Weight
Width 57.74 cm (22.73 inch)
Height 44.05 cm (17.34 inch)
Depth 19.84 cm (7.81 inch)
Depth
8.41 cm (3.31 inch)
Weight(excl. packing)
4.7 kg (10.36 lb)
Range
Tilt : -2˚ to 15˚
12 V
2.1 A
Power Input
AC-DC Adapter
Lien Chang, LCAP07F
Operating Conditions
Temperature
Environmental
Conditions
10 ˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature
Humidity
-20 ˚C to 60 ˚C
5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type
Stand Base
Power cord
NOTE
Information in this document is subject to change without notice.
29
Specifications
Preset Modes (Resolution) - D-sub(Analog) / DVI-D(Digital) INPUT
W2286L
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
720 X 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
VGA
70
60
75
60
75
60
75
75
60
75
60
60
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
10
11
*12
*Recommend Mode
W2486L
Display Modes (Resolution)
Horizontal Freq. (kHz)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
9
10
11
12
*13
720 X 400
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1680 x 1050
1680 x 1050
1920 x 1080
31.468
31.469
37.500
37.879
46.875
48.363
60.123
67.500
63.981
79.976
64.674
65.290
67.500
VGA
70
60
75
60
75
60
75
75
60
75
60
60
60
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
*Recommend Mode
30
Specifications
HDMI Vedio INPUT
Horizontal Freq. (kHz)
Display Modes (Resolution)
Vertical Freq. (Hz)
1
2
3
4
5
6
7
8
31.50
31.25
37.50
45.00
28.12
33.75
56.25
67.50
480p
576p
720p
60
50
50
60
50
60
50
60
720p
1080i
1080i
1080p
1080p
Indicator
LED Color
MODE
On Mode
Red
Red Blinking
Off
Sleep Mode
Off Mode
31
|