JVC AV 21V534 User Manual

COLOUR TELEVISION  
EQUALIZER • CINEMA SURROUND • COMPONENT INPUT  
Contents  
Knowing your TV’s features ....................................................... 3  
Remote control buttons and basic functions .............................. 4  
TV buttons and functions ........................................................... 6  
Setting up your TV ..................................................................... 7  
Basic setting for picture.............................................................. 9  
Advanced setting for picture .....................................................11  
Basic setting for sound............................................................. 12  
Advanced setting for sound ..................................................... 13  
Favorite channel and video setting .......................................... 14  
Customized setting .................................................................. 15  
TV channel presetting .............................................................. 17  
Additional preparation .............................................................. 20  
Troubleshooting ....................................................................... 22  
Specifications ........................................................................... 23  
AV-29J314  
AV-29J534  
AV-29V314  
AV-29V514  
AV-29V534  
AV-21V314  
AV-21V514  
AV-21V534  
AV-21W314  
AV-25V314  
AV-25V514  
INSTRUCTIONS  
GGT0041-001A-H  
Knowing your TV’s features  
Main features  
A2/NICAM  
(STEREO / I II)  
FAVORITE CH (Channel) You can register up to four favorite channels for quick recall with one press.  
You can listen to the stereo sound or bilingual sound from TV programme broadcasting by A2  
or NICAM Sound-multiplex system.  
I
AI ECO  
TV detects the brightness of your room and automatically adjust the picture brightness to a  
suitable level for a better eye care.  
AI VOLUME  
TV adjusts the volume automatically to the same level for all TV channels to avoid sudden  
change of the volume when selecting different TV channel.  
VNR  
You can reduce the picture noise when viewing noisy TV programmes or video sources.  
WHITE BALANCE  
You can choose one of three tones of white to match the video source such as movie,  
sports, etc. Changing WHITE BALANCE affects the appearance of all other colours on the  
screen.  
Confirm your TV’s functions  
Some functions written in this instruction manual may not be available for your TV.  
Please see the chart below and check the functions that are equipped for your TVs model number. The  
model number is indicated at the rear of your TV. When you press a button concerned to a function that is  
not available for your TV, it does not work and the logo “Ø” appears on the screen. For a function that is  
not available for your TV, it is not displayed in the menu.  
1
Model No.  
No.  
Function  
*BASS  
_
_
_
PICTURE TILT  
_
3
Remote control buttons and basic functions  
No. Press  
POWER  
MENU/OK  
To  
Turn on or off the TV from standby mode.  
Display menu and confirm selected function.  
5 / / 2 / 3 Select and adjust menu function.  
CHANNEL -/+ Select the desired channel number.  
VOLUME -/+ Adjust the volume level.  
TV/VIDEO  
MUTING  
Select TV or video terminal input.  
Turn off the volume.  
Press this button again to resume the volume.  
DISPLAY  
Display the programme number or video terminal number, stereo/bilingual broadcast system  
and PR list (channel list) on the screen.  
You can select the channel using the PR list.  
1 Press the DISPLAY button once to display the PR list.  
2 Press 5 / / 2 / 3 buttons to choose a channel, then press the MENU/OK button.  
You can confirm the favorite channels in the PR list. The channels set to favorite channels are  
indicated with coloured mark.  
0~9, -/--  
Select the programme number. For two digits programme number, press -/--, then press the  
number button.  
+
RETURN  
a) Return to the frequently view channel with one touch.  
1 Choose the channel you want to register.  
2 Press and hold RETURN+ button until RETURN PLUS PROGRAMMED!appears.  
To cancel, press and hold RETURN+ button until RETURN PLUS CANCELED!appears.  
b) Return to the previously viewed channel, if you have not set or have cancelled the Return  
channel as above.  
4
Remote control buttons and basic functions (continued)  
How to operate menus and menus locations  
Top menu  
MENU INPUT  
2nd menu  
EXT. INPUT  
DISPLAY  
PICTURE MODE  
PICTURE SETTING P.10  
WHITE BALANCE P.10  
Location 3rd menu  
Location  
P.16  
P.16  
P.9  
To  
Operation  
Note  
Display the MENU Press the MENU/OK button  
.
To exit the MENU,  
press the DISPLAY  
PICTURE  
*If you want to  
adjust PICTURE  
SETTING menu,  
you must set  
button  
EXIT menu.  
to choose a Press button  
menu title. Then press MENU/OK display the next page  
or choose  
PICTURE  
VNR  
P.15  
Display the top  
menu  
Press 5/buttons  
to  
FEATURES  
FAVORITE CH SETTING P.14  
VIDEO SETTING P.14  
COLOUR SYSTEM P.9  
COMPRESS (16:9) P.11  
PICTURE MODE  
menu to USER.  
button  
Press 5/buttons  
menu title. Then press MENU/OK  
button  
Press 5/buttons  
menu title. Then press MENU/OK  
button  
Press the DISPLAY button  
.
for more functions.  
Display the 2nd  
menu  
to choose a  
PICTURE TILT  
P.11  
.
I
SOUND  
*If you want to  
adjust  
EQUALIZER  
menu, you must  
set SOUND  
MODE menu to  
USER.  
STEREO/I II  
P.13  
P.13  
P.12  
P.13  
P.12  
P.12  
Display the 3rd  
menu  
to choose a  
AI VOLUME  
SOUND MODE  
EQUALIZER  
BALANCE  
SOUND TURBO  
CINEMA SURROUND P.13  
SUPER BASS  
OFF TIMER  
CHILD LOCK  
AI ECO SENSOR P.11  
AUTO PROGRAM P.17  
.
Return to the  
previous menu  
.
Choose the setting Press 5/buttons  
to choose Press the MENU/OK  
of a function  
a function. Then press the 2/3  
button  
to exit from  
P.12  
P.15  
P.15  
buttons  
to change the setting. the menu.  
FEATURES  
INSTALL  
Adjust the effect  
level of a function  
Press 5/buttons  
a function. Then press the 2/3  
to choose  
buttons  
to adjust the effect  
Press the 5/buttons to  
level.  
EDIT/MANUAL  
P.17  
DELETE, MOVE,  
MANUAL,INSERT P.18  
P.17-  
Display the sub  
menu of a function. choose a function. Then press  
LANGUAGE  
BLUE BACK  
AUTO SHUTOFF  
VIDEO-2 SETTING P.18  
AI ECO DISPLAY P.11  
P.17  
P.11  
P.18  
LANGUAGE  
P.15  
MENU/OK buttons  
the sub menu.  
to display  
The following chart shows locations of functions in menus. In this manual,  
location of a function is described as follows:  
2nd menu  
2nd menu  
MENU  
MENU  
Top menu  
Top menu  
EXIT  
3rd menu  
Note: Some functions have the 4th menus as the sub-menus.  
5
TV buttons and functions  
The illustrations shown below is for 29V and 29J series  
only, which are used for explanation purpose.  
Your TV may not look exactly the same as illustrated.  
No. Button/terminal Description  
Page  
L (main power) Press to turn on or turn off the TVs main power.  
POWER lamp  
Indicate the TV is being turned on or off.  
No colour: TVs main power is being turned off.  
Front of the TV  
Red  
:
TVs main power is being turned on.  
Note: When you turn off the power switch while TV is in standby  
mode, the light of power lamp will be off in 10 -15 seconds.  
29V Series  
!
9
8
7
6
5
4
3
2
1
ECO sensor  
Remote control sensor  
TV/ VIDEO  
VOLUME -/+  
CHANNEL -/+  
MENU  
Press to select TV or video mode.  
POWER  
V
L/MONO  
R
MENU  
OK  
CHANNEL  
VOLUME TV/VIDEO  
EXIT  
IN (VIDEO-3)  
Press to adjust the volume level.  
Press to select the desired channel.  
Press to display the menu.  
29J Series  
2
1
3
4
IN (VIDEO-3)  
Video and audio input jacks for VIDEO-3 mode.  
Headphone jack.  
Aerial socket.  
20  
20  
7
POWER  
OUTPUT  
Video and audio output jacks. (The component video  
signal cannot be output.)  
IN (VIDEO-3)  
MENU CHANNEL  
VOLUME  
TV/VIDEO  
20  
20  
V
L/MONO  
R
OK  
EXIT  
COMPONENT  
Video or component video, and audio input jacks for  
(VIDEO-2) INPUT VIDEO-2 mode. You can select the input signal by setting  
!
9
8 7 6 5  
the VIDEO-2 SETTINGfunction (see page 16).  
VIDEO-1 INPUT Video or S-VIDEO, and audio input jacks for VIDEO-1  
mode  
Rear of the TV  
7
BASS SPEAKER Twin Port Bass Blaster Unit output terminal.  
OUT  
21  
For models with Bass  
For models without Bass  
COMPONENT  
(VIDEO-2)  
INPUT  
COMPONENT  
(VIDEO-2)  
INPUT  
VIDEO-1  
VIDEO-1  
OUTPUT  
OUTPUT  
INPUT  
INPUT  
How to operate the menus with the TV button  
Work as same as the button on the  
S
S
TV button  
Note  
OVER  
V
OVER  
V
remote control unit  
V
L
Y
V
L
Y
/
V
/
V
BASS  
SPEAKER  
OUT  
MENU  
MENU/OK button  
To display main menu and exit  
menu after finish setting.  
L
L
C
C
B
L
/
L
/
/
/
MONO  
MONO  
C
C
B
MONO  
MONO  
R
R
R
R
R
R
R
R
CHANNEL -/+ 5/button  
To select menu function.  
VOLUME -/+ 2/3 button  
To adjust the desired function.  
#
"
$
& %  
#
"
$
%
6
Setting up your TV  
CAUTION  
Turn off the equipment including the TV before connecting.  
1 Connecting the aerial cable.  
2 Connecting the compatible main plug to the AC  
outlet.  
(1)  
VHF/UHF outdoor aerial  
Matching aerial  
adapter (supplied)  
(2)  
3 Inserting batteries into the remote control.  
Insert two batteries by following the + and -  
polarities and inserting the - end first.  
CAUTION:  
(3)  
Follow the cautions printed on the batteries.  
75-ohm coaxial cable (not supplied)  
Notes:  
Use AA/R6/UM-3 dry cell batteries.  
It the remote control does not work properly, fit new  
batteries. The supplied batteries are for testing, not regular use.  
If you connect a VCR, connect the aerial output jack of your VCR  
and the aerial jack on the TV with the aerial cable. Then connect the  
output jacks of your VCR and the VIDEO-1 input jacks of the TV  
with the video cable (or S-VIDEO cable if available) and audio  
cables. For details, see the manual of your VCR.  
4 Turn on the TV by pressing the main  
power button.  
JVC logo appears on the screen.  
Rear of TV  
COMPONENT  
VIDEO-1  
(VIDEO-2)  
INPUT  
OUTPUT  
INPUT  
S
OVER  
V
V
L
Y
/
V
L
L
C
C
B
/
/
MONO  
MONO  
To video  
output  
To audio  
output  
To RF  
output  
R
R
R
R
To S-video  
output  
VCR  
To aerial input  
The illustration shown is just a sample. It may not be same as your TV.  
7
Setting up your TV (continued)  
5 Making the initial settings  
Set up your TV by pressing MENU/OK button or waiting for 15 seconds, then the TV will operate by following steps as below:  
LANGUAGE  
ENGLISH  
AUTO PROGRAM  
AUTO PROGRAM  
EDIT  
PR  
7
8
CH/CC  
CH 09  
CH 11  
CH 13  
SETUP TOUR RESTART?  
CH 12  
22%  
9
I
3
.
OK  
I
RESTART  
NO  
10  
11  
12  
13  
BACK  
I
OK  
BACK  
I
IINSERT  
IDELETE  
IMANUAL  
OK  
OK MOVE  
.
Press 5/button to  
select your desired  
language.  
TV will start searching  
for the channels.  
Press the red button to  
cancel the SETUP TOUR  
RESTART function.  
If you want to make initial  
settings again when the  
next time you turn on the  
TV, press the MENU/OK  
button to activate the  
SETUP TOUR RESTART  
function.  
To complete the initial  
setting, press the  
MENU/OK button. To  
edit the channel list,  
see page 17.  
To stop AUTO  
PROGRAM, press  
MENU/OK button.  
If the JVC logo does not appear, use LANGUAGE, and AUTO PROGRAM functions to make the initial settings. Those functions are  
located in the INSTALL menu.  
If the JVC logo appears, although you had made the initial settings, press the TV/VIDEO button to exit from initial settings.  
8
Basic setting for picture  
For the colour system in each country or region, see the table below:  
COLOUR SYSTEM  
Area  
Country or Region  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
System  
You can select the appropriate colour system when the picture is  
not clear or no colour appears.  
Press the COLOUR SYSTEM button to select a setting.  
Yemen, etc.  
PAL  
Indonesia, Malaysia, Singapore, Thailand, India, etc.  
Asia, Middle  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
PAL  
PAL  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. SECAM  
<AV-29J314/AV-29V314/AV-25V314/AV-21V314/AV-21W314>  
In TV mode:  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
NTSC  
SECAM  
PAL  
PAL  
PAL  
AUTO  
PAL  
SECAM  
Europe  
<Other Models>  
In VIDEO mode:  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
PAL  
PAL  
PAL  
AUTO  
PAL  
SECAM  
Egypt, Morocco, etc.  
SECAM  
NTSC4.43  
NTSC3.58  
PICTURE MODE  
You can choose the desired picture setting with one-touch.  
Press the PICTURE MODE button to select a setting.  
AUTO  
PAL  
SECAM  
SOFT  
Softens contrast and sharpness.  
BRIGHT  
STANDARD  
USER  
Heightens contrast and sharpness.  
Standard picture setting.  
You can change this picture setting as you like.  
Select USER and adjust following items in the  
PICTURE SETTING menu. (CONTRAST, BRIGHT,  
SHARP, COLOUR, TINT*)  
NTSC4.43  
NTSC3.58  
To operate this function with a menu:  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
COLOUR SYSTEM  
*TINT can only be adjusted in NTSC system.  
To operate this function with a menu:  
MENU  
PICTURE menu  
PICTURE MODE  
To return the USER setting to the default, press the blue button  
when the PICTURE SETTING menu appears.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
9
Basic setting for picture (continued)  
Adjusting the picture – USER  
WHITE BALANCE  
You can adjust the desired picture setting when selecting USER  
in PICTURE MODE.  
You can change the white balance of the picture to better match  
the type of video being viewed.  
Select the WHITE BALANCE in the PICTURE menu, then choose  
the desired setting.  
1 Select the USER in PICTURE MODE under PICTURE menu.  
PICTURE menu  
PICTURE MODE  
MENU  
USER  
PICTURE menu  
MENU  
WHITE BALANCE  
2 Select the PICTURE SETTING in PICTURE menu, then adjust  
NORMAL  
COOL  
WARM  
Normal white balance.  
Bluish white.  
Reddish white.  
the setting.  
PICTURE menu  
PICTURE SETTING  
MENU  
CONTRAST  
BRIGHT  
SHARP  
COLOUR  
TINT*  
2 : Lower contrast  
2 : Darker  
2 : Softer  
2 : Lighter  
2 : Reddish  
3 : Higher contrast  
3 : Brighter  
3 : Higher  
3 : Deeper  
3 : Greenish  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
*TINT can only be adjusted in NTSC system.  
10  
Advanced setting for picture  
2 Press the 5/buttons until the picture become level. Then  
AI ECO SENSOR (ECO)  
You can adjust TV screen contrast according to the brightness of  
your room.  
press the MENU/OK button.  
Press the ECO button to select the desired mode.  
COMPRESS (16:9)  
1
2
Mild contrast (recommended).  
Even contrast.  
You can convert a normal picture (4:3 aspect ratio) into a wide  
picture (16:9 aspect ratio).  
OFF  
Cancel the function.  
Select the COMPRESS (16:9) in the PICTURE FEATURES menu  
under PICTURE menu, then choose ON or OFF.  
To operate this function with a menu:  
FEATURES menu  
MENU  
AI ECO SENSOR  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
You can display the graphic of AI ECO SENSOR on the screen.  
Select the AI ECO DISPLAY in the INSTALL menu, then choose  
COMPRESS (16:9)  
ON or OFF.  
MENU  
INSTALL menu  
AI ECO DISPLAY  
BLUE BACK  
You can set the TV to automatically change to a blue screen and  
mute the sound if the signal is weak or absent, or when there is  
no input from an antenna.  
Correcting the Slanting Picture (PICTURE TILT)  
You can correct the picture tilt caused by the earth’s magnetic force.  
1 Select the PICTURE TILT in the PICTURE FEATURES menu  
Select the BLUE BACK in the INSTALL menu, then choose ON or  
under PICTURE menu, then press MENU/OK button.  
OFF.  
PICTURE menu  
MENU  
PICTURE FEATURES menu  
MENU  
INSTALL menu  
BLUE BACK  
PICTURE TILT  
If you wish to continue viewing the poor picture, cancel the BLUE  
BACK function.  
The following display appears.  
PICTURE TILT  
About the basic operations of the menu, please see the “How  
to operate menus and menus locations” on page 5.  
BACK  
I
OK  
.
11  
Basic setting for sound  
SOUND SYSTEM  
SOUND MODE  
You can select an appropriate sound system when abnormal  
sound occurs even when the picture appears normally.  
Press the SOUND SYSTEM button to select a setting.  
You can choose the desired sound setting.  
Select the SOUND MODE in SOUND menu, then choose the  
setting.  
B/G  
I*  
D/K* M*  
MENU  
SOUND menu  
SOUND MODE  
.
.
USER  
You can change this sound setting as you like.  
Select USER and adjust the frequencies in EQUALIZER  
(100, 300, 1K, 3K, 8K Hz).  
For details, see EQUALIZERon page 13.  
Emphasize on both vocal sound and music.  
Emphasize on music effect.  
* The sound system of I, D/K and M are not available for 314 series.  
This function is not available in video mode.  
For the sound system in each country or region, see the table below:  
Area  
Country or Region  
System  
DYNAMIC  
MUSIC  
NEWS  
Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,  
Yemen, etc.  
B/G  
Emphasize on vocal sound.  
Indonesia, Malaysia, Singapore, Thailand, India, etc.  
Asia, Middle  
East  
China, Vietnam, etc.  
Hong Kong, etc.  
Islamic Republic of Iran, Lebanon, Saudi Arabia, etc. B/G  
Philippines, Taiwan, Myanmar, etc.  
Russia, etc.  
Czech Republic, Poland, etc.  
Germany, Holland, Belgium, etc.  
UK, etc.  
D/K  
I
BALANCE  
M
You can adjust the volume balance between the left and right  
speakers.  
Select the BALANCE in SOUND menu, then adjust the setting.  
D/K  
D/K  
B/G  
I
B/G  
I
Europe  
SOUND menu  
MENU  
BALANCE  
Oceania  
Africa  
Australia, New Zealand, etc.  
Republic of South Africa, etc.  
Nigeria, etc.  
B/G  
B/G  
SOUND TURBO  
Egypt, Morocco, etc.  
You can enjoy the emphatic low and high frequency levels.  
SUPER BASS (BASS)  
Press the SOUND TURBO to select ON or OFF.  
You can enjoy powerful bass sound with the Twin Port Bass  
Blaster unit.  
To operate this function with a menu:  
MENU  
SOUND menu  
SOUND TURBO  
Press the BASS button to select ON or OFF.  
To operate this function with a menu:  
About the basic operations of the menu, please see the How  
SOUND menu  
MENU  
SUPER BASS  
to operate menus and menus locationson page 5.  
For attaching the Twin Port Bass Blaster unit, please see in page  
21.  
12  
Advanced setting for sound  
CINEMA SURROUND  
EQUALIZER  
You can enjoy an enhanced sound for wider audience.  
Press the CINEMA SURROUND button to select a setting.  
You can adjust the sound level of each frequencies when selecting  
USER mode in SOUND MODE.  
OFF  
Cancel the function.  
1 Select the USER in SOUND MODE under SOUND menu.  
LOW  
HIGH  
MONO  
Listen to sound with less wider audience effect.  
Listen to sound with more wider audience effect.  
Listen to mono sound with stereo effect.  
SOUND menu  
MENU  
SOUND MODE  
USER  
2 Select the EQUALIZER in SOUND menu.  
MENU  
SOUND menu  
EQUALIZER  
To operate this function with a menu:  
The following display appears.  
SOUND menu  
MENU  
CINEMA SURROUND  
EQUALIZER  
If slight volume distortion occurs when you select HIGH mode,  
change the setting to LOW mode. The CINEMA SURROUND  
effect will be less noticeable.  
100 300  
1K  
3K  
8K Hz  
If you use CINEMA SURROUND and SOUND TURBO together,  
volume distortion might occurs.  
BACK  
I
OK  
.
I
STEREO / I II (  
)
3 Select and adjust the desired frequencies.  
You can enjoy the stereo and bilingual broadcasted programmes.  
4 Press the MENU/OK button to exit the menu.  
Adjust high frequency will affect higher pitch sound and vice versa.  
Press the  
button to select the desired mode.  
Select stereo sound.  
Select monaural sound.  
Select bilingual I (sub I).  
AI VOLUME  
I
II  
You can adjust the volume of all the channels and video inputs to  
the same level automatically.  
Select the AI VOLUME in SOUND menu, then choose ON or OFF.  
Select bilingual II (sub II).  
Cancels the Multi Sound function, and the sound  
becomes monaural.  
MONO  
SOUND menu  
This function is not available in video mode.  
To operate this function with a menu:  
MENU  
AI VOLUME  
About the basic operations of the menu, please see the How  
I
SOUND menu  
MENU  
STEREO / I II  
to operate menus and menus locationson page 5.  
13  
Favorite channel and video setting  
4 Select the desired item that you wish to adjust.  
CONTRAST BRIGHT SHARP COLOUR  
To register the favorite channel  
You can register and recall 4 favorite channels by using the  
colour buttons (red, green, yellow, blue).  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
TINT  
1 In TV mode, select a TV channel (PR01-99) you desired to register.  
5 Press the MENU/OK button to exit the menu.  
2 Press and hold a colour button for 3 seconds or more.  
FAVORITE CHANNEL I PROGRAMMED!appears on the  
screen and current channel is registered.  
To adjust the video setting (VIDEO SETTING)  
You can adjust the picture and sound settings for video inputs.  
3 To register other favorite channels, repeat Step 1 to 2.  
To recall the favorite channel, press the colour button.  
When the TV is in menu mode, favorite channel function is not  
available.  
1 Display the PICTURE menu and select VIDEO SETTING in  
PICTURE FEATURES menu.  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
VIDEO SETTING  
To adjust favorite channel setting  
(FAVORITE CH SETTING)  
2 Select VIDEO STATUS in VIDEO SETTING menu, then  
choose the desired video input.  
VIDEO SETTING  
VIDEO STATUS  
You can adjust the picture and sound settings for the favorite channels.  
1 Display the PICTURE menu and select FAVORITE CH  
SETTING in PICTURE FEATURES menu.  
VIDEO SETTING  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
VIDEO STATUS  
CONTRAST  
BRIGHT  
SHARP  
COLOUR  
TINT  
VIDEO-1  
MENU  
PICTURE menu  
PICTURE FEATURES menu  
To cancel the settings, choose OFF.  
FAVORITE CH SETTING  
SOUND MODE  
EFFECT  
USER  
ON  
2 Select FAVORITE CHANNEL in FAVORITE CH SETTING  
menu, then choose the desired favorite channel.  
BACK  
I
IRESET  
OK  
FAVORITE CH SETTING  
FAVORITE CHANNEL  
.
FAVORITE CH SETTING  
3 Select EFFECT, then press 2/3 button  
to choose ON.  
4 Select the desired item that you wish to adjust.  
CONTRAST BRIGHT SHARP COLOUR  
FAVORITE CHANNEL  
CONTRAST  
BRIGHT  
I
PR 01  
To cancel the settings, choose OFF.  
SHARP  
COLOUR  
SOUND MODE (USER, DYNAMIC, MUSIC, NEWS)  
TINT  
TINT  
SOUND MODE  
EFFECT  
5 Press the MENU/OK button to exit the menu.  
USER  
ON  
BACK  
I
About the basic operations of the menu, please see the How  
OK  
to operate menus and menus locationson page 5.  
.
14  
Customized setting  
VNR  
CHILD LOCK  
You can reduce the noise.  
You can disable the front control buttons of the TV.  
Select the VNR in the PICTURE FEATURES menu under  
Select the CHILD LOCK in the FEATURES menu, then choose  
PICTURE menu, then choose a setting of VNR function.  
ON or OFF.  
PICTURE menu  
FEATURES menu  
MENU  
PICTURE FEATURES menu  
MENU  
CHILD LOCK  
VNR  
OFF TIMER  
OFF  
VNR is turned off.  
You can set the TV to turn off automatically to standby mode after  
a set time.  
Press the OFF TIMER button to select a desired period of time.  
AUTO  
MIN  
MAX  
Effect of VNR is automatically controlled.  
Effect of VNR becomes minimum level.  
Effect of VNR becomes maximum level.  
OFF TIMER  
If you select MAX, the picture becomes softer even if the original  
picture is sharp.  
0
120  
You can set the period of time  
to a maximum of 120 minutes  
in 10 minutes step.  
10  
LANGUAGE  
You can choose your desired on screen display language.  
BACK  
I
Select the LANGUAGE in the INSTALL menu, then choose a  
OK  
language.  
.
To operate this function with a menu:  
INSTALL menu  
MENU  
LANGUAGE  
FEATURES menu  
MENU  
OFF TIMER  
When the elapsed of time left one minute, GOOD NIGHT!”  
appears on the screen.  
You can display the OFF TIMER menu again to confirm or  
change the remaining time.  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
15  
Customized setting (continued)  
AUTO SHUTOFF  
EXT. INPUT (TV/VIDEO)  
You can set the TV to turn off automatically when no signal is  
received for about 15 minutes or longer after the end of a  
broadcast.  
You can select TV or video terminal input with one touch.  
Press the TV/VIDEO button to select an input.  
To operate this function with a menu:  
Select AUTO SHUTOFF in INSTALL menu, then choose ON or  
INPUT menu  
MENU  
EXT. INPUT  
OFF.  
MENU  
INSTALL menu  
AUTO SHUTOFF  
DISPLAY  
The AUTO SHUTOFF function does not turn off the TVs main  
power.  
The AUTO SHUTOFF function is not available in video mode.  
You can display the programme number, video terminal number  
and PR list on the screen.  
Press the DISPLAY button to select the desired mode:  
ON  
OFF  
PR LIST  
VIDEO-2 SETTING  
You can set the VIDEO-2 SETTING according to the video signal  
output from the external devices connected to the VIDEO-2  
terminal.  
Choose a TV channel or a VIDEO terminal.  
1 Press the DISPLAY button to display the PR LIST.  
2 Select a programme number or video terminal by pressing the  
5/button to move up/down on the programme number or  
press the 2/3 button to skip for each 7 programme numbers,  
Select the VIDEO-2 SETTING in INSTALL menu, then choose a  
setting.  
MENU  
INSTALL menu  
VIDEO-2 SETTING  
then press MENU/OK button.  
PR LIST  
VIDEO  
If a normal video signal (composite video signal) is  
input.  
PR  
AV  
1
2
3
4
5
6
CH/CC  
I
I
I
I
CH 03  
CH 05  
CH 07  
CH 09  
CC 04  
CC 05  
B
R
COMPONENT  
If a component video signal (Y/C /C ) is input.  
For connecting methods, see Additional Preparationon page  
20.  
.
-7 OK +7  
About the basic operations of the menu, please see the How  
.
To operate this function with a menu:  
to operate menus and menus locationson page 5.  
INPUT menu  
MENU  
DISPLAY  
About the basic operations of the menu, please see the How  
to operate menus and menus locationson page 5.  
16  
TV channel presetting  
2 Choose EDIT/MANUAL, then press the MENU/OK button.  
To register the TV channels automatically  
EDIT menu appears.  
You can register the TV channels into the TVs channel list  
automatically.  
EDIT  
PR  
7
8
CH/CC  
CH 09  
CH 11  
CH 13  
1 Display the INSTALL menu.  
INSTALL menu  
MENU  
9
I
3
10  
11  
12  
13  
2 Choose AUTO PROGRAM, then press the MENU/OK button.  
AUTO PROGRAM function starts, and the channels received  
are registered in the channel list (PR list) automatically.  
BACK  
I
IINSERT  
IDELETE  
IMANUAL  
OK MOVE  
3 SETUP TOUR RESTART?appears.  
.
To start the SETUP  
TOUR  
To skip the SETUP  
TOUR  
Press the MENU/OK button. Then proceed to  
step 5 of Setting up your TVon page 8.  
Press the Red button.  
3 Choose the channel which you want to register.  
4 Press the blue button to activate the MANUAL function.  
The sound system of the channel appears at the right of the  
CH/CC number.  
5 Press the 3 button to choose an appropriate sound system.  
For details, see SOUND SYSTEMon page 12.  
4 The EDIT menu appears.  
To edit the channel  
list  
Proceed to the Step 3 of To edit the channel  
list (PR LIST)on page 18.  
6 Press the green or red button to search for the TV channel.  
Searching stops when a channel is found and displayed.  
7 Repeat step 5 until your desired TV channel appears  
If a channel is not  
registered  
To exit the menu  
Proceed to the Step 3 of To register the  
TV channels manuallyon this page.  
Press the MENU/OK button.  
For details of SETUP TOUR, see page 8.  
If the reception is poor Press the blue or yellow button to fine tune  
the TV channel.  
If noisy sound is heard Press the 3 button to choose an appropriate  
sound system.  
To register the TV channels manually  
(MANUAL in the EDIT menu)  
You can register the TV channels into the TVs channel list manually.  
8 Press the MENU/OK button to exit the menu.  
1 Display the INSTALL menu.  
About the basic operations of the menu, please see the How  
INSTALL menu  
MENU  
to operate menus and menus locationson page 5.  
17  
TV channel presetting (continued)  
To edit the channel list (PR LIST)  
(MOVE and DELETE in the EDIT menu)  
To add in the new channel  
(INSERT in the EDIT menu)  
You can edit the TV channel list as you like.  
Note: After this operation, other channels PR numbers will be  
changed.  
You can add in the new channel in the TV channel list as you like.  
You need to find the CH/CCnumber for the TV channel. Find the  
CH/CCnumber corresponding to the channel number of the TV  
channel from the attached sheet CH/CC number liston page 19.  
1 Display the INSTALL menu.  
1 Display the INSTALL menu.  
INSTALL menu  
MENU  
INSTALL menu  
MENU  
2 Choose EDIT/MANUAL, then press the MENU/OK button.  
2 Choose EDIT/MANUAL, then press the MENU/OK button.  
EDIT menu appears.  
EDIT menu appears.  
EDIT  
PR  
7
8
CH/CC  
CH 09  
CH 11  
CH 13  
3 Choose the PR number for which you will register a new TV  
channel. When you add a new TV channel of NTSC-M system,  
press the SOUND SYSTEM button to change the sound  
system to M. Then proceed to the next step.  
9
I
3
10  
11  
12  
13  
4 Press the green button, then press 5/buttons to choose  
BACK  
I
IINSERT  
IDELETE  
IMANUAL  
OK MOVE  
CCor CH.  
.
5 Press the number button to enter the remaining CH/CC  
number.  
3 Choose the channel which you want to change PR number, or  
delete.  
The TV starts to search the TV channel, and the picture of the  
TV channel appears. If the TV finds no TV channel, a noisy  
picture appears.  
4 Do the following action:  
To change the PR  
number (MOVE)  
Press the 3 button. Then move it to the PR  
number you want to use it for the channel.  
Finally press the 2 button.  
When a TV channel has already been registered in PR99, using  
the INSERT function deletes that TV channel.  
To delete the  
Press the yellow button.  
channel (DELETE)  
About the basic operations of the menu, please see the How  
5 Press the MENU/OK button to exit the menu.  
to operate menus and menus locationson page 5.  
18  
TV channel presetting (continued)  
CH  
US  
CCIR  
E33  
E34  
E35  
E36  
E37  
E38  
E39  
E40  
E41  
E42  
E43  
E44  
E45  
E46  
E47  
E48  
E49  
E50  
E51  
E52  
E53  
E54  
E55  
E56  
E57  
E58  
E59  
E60  
E61  
E62  
E63  
E64  
E65  
E66  
E67  
E68  
E69  
OIRT  
AUSTRALIA  
CC  
US  
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
CCIR  
S-18  
S-19  
S-20  
S-21  
S-22  
S-23  
S-24  
S-25  
S-26  
S-27  
S-28  
S-29  
S-30  
S-31  
S-32  
S-33  
S-34  
S-35  
S-36  
S-37  
S-38  
S-39  
S-40  
S-41  
OIRT  
AUSTRALIA  
CH/CC number  
CH 33  
CH 34  
CH 35  
CH 36  
CH 37  
CH 38  
CH 39  
CH 40  
CH 41  
CH 42  
CH 43  
CH 44  
CH 45  
CH 46  
CH 47  
CH 48  
CH 49  
CH 50  
CH 51  
CH 52  
CH 53  
CH 54  
CH 55  
CH 56  
CH 57  
CH 58  
CH 59  
CH 60  
CH 61  
CH 62  
CH 63  
CH 64  
CH 65  
CH 66  
CH 67  
CH 68  
CH 69  
US-33, W+48  
US-34, W+49  
US-35, W+50  
US-36, W+51  
US-37, W+52  
US-38, W+53  
US-39, W+54  
US-40, W+55  
US-41, W+56  
US-42, W+57  
US-43, W+58  
US-44, W+59  
US-45, W+60  
US-46, W+61  
US-47, W+62  
US-48, W+63  
US-49, W+64  
US-50, W+65  
US-51, W+66  
US-52, W+67  
US-53, W+68  
US-54, W+69  
US-55, W+70  
US-56, W+71  
US-57, W+72  
US-58, W+73  
US-59, W+74  
US-60, W+75  
US-61, W+76  
US-62, W+77  
US-63, W+78  
US-64, W+79  
US-65, W+80  
US-66, W+81  
US-67, W+82  
US-68, W+83  
US-69, W+84  
CC 18  
CC 19  
CC 20  
CC 21  
CC 22  
CC 23  
CC 24  
CC 25  
CC 26  
CC 27  
CC 28  
CC 29  
CC 30  
CC 31  
CC 32  
CC 33  
CC 34  
CC 35  
CC 36  
CC 37  
CC 38  
CC 39  
CC 40  
CC 41  
CC 42  
CC 43  
CC 44  
CC 45  
CC 46  
CC 47  
CC 48  
CC 49  
CC 50  
CC 51  
CC 52  
CC 53  
CC 54  
CC 55  
CC 56  
CC 57  
CC 58  
CC 59  
CC 60  
CC 61  
CC 62  
CC 63  
CC 64  
CC 75  
CC 76  
CC 77  
CC 78  
CC 79  
CC 95  
CC 96  
CC 97  
CC 98  
CC 99  
When you want to use the INSERT  
function on page 18, find the CH/CC  
number corresponding to the channel  
number of the TV channel from this table.  
Channel No. Country  
US  
CCIR  
United States, Philippines, etc..  
Middle East, Southeast Asia,  
etc..  
U
V
W
OIRT  
Eastern Europe, Russia,  
Vietnam, etc..  
W+1  
W+2  
W+3  
W+4  
W+5  
W+6  
W+7  
W+8  
W+9  
W+10  
W+11  
W+12  
W+13  
W+14  
W+15  
W+16  
W+17  
W+18  
W+19  
W+20  
W+21  
W+22  
W+23  
W+24  
W+25  
W+26  
W+27  
W+28  
AUSTRALIA  
Channel  
Australia, etc..  
CH  
US  
CCIR  
E2  
OIRT  
R1  
AUSTRALIA  
AU-0  
AU-1  
AU-2  
AU-6  
AU-7  
AU-8  
AU-9  
CH 02  
CH 03  
CH 04  
CH 05  
CH 06  
CH 07  
CH 08  
CH 09  
CH 10  
CH 11  
CH 12  
CH 13  
CH 14  
CH 15  
CH 16  
CH 17  
CH 18  
CH 19  
CH 20  
CH 21  
CH 22  
CH 23  
CH 24  
CH 25  
CH 26  
CH 27  
CH 28  
CH 29  
CH 30  
CH 31  
CH 32  
US-2  
US-3  
US-4  
US-5  
US-6  
US-7  
US-8  
US-9  
US-10  
E3  
E4  
E5  
E6  
E7  
E8  
E9  
E10  
E11  
E12  
R2  
R6  
R7  
R8  
R9  
R10  
R11  
R12  
AU-10  
AU-11  
US-11  
US-12  
US-13  
US-14, W+29  
US-15, W+30  
US-16, W+31  
US-17, W+32  
US-18, W+33  
US-19, W+34  
US-20, W+35  
US-21, W+36  
US-22, W+37  
US-23, W+38  
US-24, W+39  
US-25, W+40  
US-26, W+41  
US-27, W+42  
US-28, W+43  
US-29, W+44  
US-30, W+45  
US-31, W+46  
US-32, W+47  
CC  
US  
CCIR  
S-1  
S-2  
S-3  
S-4  
S-5  
S-6  
S-7  
S-8  
OIRT  
AUSTRALIA  
AU-5  
CC 01  
CC 02  
CC 03  
CC 04  
CC 05  
CC 06  
CC 07  
CC 08  
CC 09  
CC 10  
CC 11  
CC 12  
CC 13  
CC 14  
CC 15  
CC 16  
CC 17  
E21  
E22  
E23  
E24  
E25  
E26  
E27  
E28  
E29  
E30  
E31  
E32  
AU-5A  
X
Y
Z
Z+1  
Z+2  
S-9  
R3  
R4  
R5  
S-10  
S-11  
S-12  
S-13  
S-14  
S-15  
S-16  
S-17  
AU-3  
AU-4  
A-5  
A-4  
A-3  
A-2  
A-1  
A
B
C
D
19  
Additional preparation  
The illustrations shown in this section are for 29V and 29J series  
only, which are used for explanation purpose. Your TV may not  
look exactly the same as illustrated.  
Connecting to rear component/video input  
terminal and output terminal  
Rear of TV  
Before connecting  
VCR (for playing)  
DVD player (composite signals)  
COMPONENT  
(VIDEO-2)  
INPUT  
.
VIDEO-1  
Read the manuals provided with the devices for the proper  
OUTPUT  
INPUT  
connection.  
S
Turn off all the devices including the TV.  
Note that connecting cables are not supplied.  
VCR (for recording)  
OVER  
V
V
L
Y
/
V
L
/
L
/
CB  
DVD player  
(component video signals)  
MONO  
MONO  
Connecting to front video input terminal  
CR  
R
R
R
29V series  
Front of TV  
When you use VIDEO-1 INPUT, you should choose to connect  
S-VIDEO or video input. If S-VIDEO connector and video input  
are connected at the same time, no picture displays on the  
screen and the message PLEASE DISCONNECT VIDEO-1  
CABLE!appears. In this case, you should disconnect either S-  
VIDEO or video input.  
Camcorder or TV game  
R
V
L/MONO  
MENU  
OK  
IN (VIDEO-3)  
Headphones  
29J series  
IN (VIDEO-3)  
L/MONO  
When connecting to COMPONENT (VIDEO-2) input, depending  
on the connection, choose the appropriate video input using the  
menu (see page 16).  
MENU  
OK  
V
R
20  
Additional preparation (continued)  
2
Firmly insert the Twin Port Bass Blaster Unit connector into  
the BASS SPEAKER OUT terminal.  
Attaching the Twin Port Bass Blaster Unit  
<AV-29J534/AV-29V534/AV-21V534 only>  
The Twin Port Bass Blaster Unit is packaged together with the TV.  
Before you use the TV, mount the Twin Port Bass Blaster unit  
correctly on the TV.  
COMPONENT  
VIDEO-1  
(
)
VIDEO-2  
INPUT  
OUTPUT  
INPUT  
S
The SUPER BASS (BASS) function do not work unless the  
Twin Port Bass Blaster Unit is connected correctly to the TV.  
For details on the SUPER BASS (BASS) function, see page  
12.  
OVER  
V
Y
C
V
/V  
B
BASS  
SPEAKER  
OUT  
L
/
/MONO  
1
Place the unit on top of the TV making sure that the mounting  
pin on the bottom of the unit fits into the mounting hole on the  
top of the TV.  
R
C
R
When you mount the unit, make sure that the mounting pin  
fits properly into the mounting hole. Otherwise, it may slide  
off the top of the TV. This may cause damage or cause  
unexpected injury.  
CAUTION:  
The Twin Port Bass Blaster Unit is just placed on top of the TV  
and is not held in place by a screw. When using the unit, pay  
attention to the following cautions. Otherwise, the unit or TV may  
fall over and be damaged, or cause unexpected injury.  
• Do not rest your hands or elbows on the Twin Port Bass  
Blaster Unit.  
Twin Port  
Bass Blaster  
Unit  
• Do not move the TV with the Twin Port Blaster Unit mounted  
on top of the TV. Before you move the TV, be sure to remove  
the unit.  
• Do not move the TV by holding the Twin Port Bass Blaster  
Unit.  
21  
Troubleshooting  
If a problem occurs when you are using the TV, check the below  
troubleshooting guide before calling for repair.  
• Cannot operate the  
remote control  
• The batteries may be exhausted. Replace with  
new batteries (see page 7).  
• Ensure that you are operating the remote less  
than seven meters from the front of your TV.  
• No picture,  
no sound  
• Deactivate the BLUE BACK function if it is turned  
on.  
• Choose the appropriate sound system. Refer to  
“SOUND SYSTEM” on page 12.  
• Cannot operate the  
menus  
• Press TV/VIDEO button to return to TV mode and  
try operating the menus.  
• Cannot operate the  
front control buttons  
• Deactivate the CHILD LOCK function if it is turned  
on (see page 15).  
• Snowy picture  
• Check the aerial cable and its connection with the  
TV.  
• TV is turned off  
suddenly  
• This may due to the AUTO SHUT OFF function is  
activated. Press the POWER button to turn on the  
TV.  
• Stripes appear on • Interference occurs caused by other devices such  
the picture  
as an amplifier, personal computer, or a hair drier.  
Move such devices away from your TV.  
• Colour patches  
appear at the corner  
of the screen  
• This may due to the magnetized device such as a  
speaker near to your TV. Keep the device apart  
from your TV. Alternately, you can also use the  
magnetic-shielded speaker.  
• Double-pictures  
(ghosting) occur  
• Interference occurs caused by signal reflecting  
from mountains or building. Try to adjust the  
aerial’s direction or use a better directionality  
antenna.  
• Picture is tilted  
• This may due to the earth magnetism. Refer to  
“PICTURE TILT” on page 11 to correct the tilt.  
• Poor picture  
• Choose the appropriate colour system. Refer to  
“COLOUR SYSTEM” on page 9.  
• Adjust the COLOUR or BRIGHT setting. Refer to  
“Adjusting the picture - USER” on page 10.  
• Image takes a short  
period to be  
displayed  
• Image required time to stabilize before display.  
This is not a malfunction.  
• White and bright still • Inevitable phenomenon due to the nature of the  
image look as if it  
were coloured  
• TV may emitted  
crackling sound  
• This is due to a sudden change in temperature  
and it is not a malfunction. If the crackling sound  
is too frequent, request your service technician for  
inspection.  
picture tube. This is not a malfunction.  
Top of the image  
from software  
products or video  
tape is distorted  
• This is due to the condition of the video signal  
whereby the image was not recorded properly.  
This is not a malfunction.  
• Feel a slight electric  
shock when  
touching the TV  
screen  
• This is due to the static electricity of the picture  
tube and it will not harm the human body. This is  
not a malfunction.  
• Poor sound  
• Adjust the sound frequency properly. Refer to  
“EQUALIZER” on page 13.  
• Stereo or bilingual • TV channel reception is poor. Change the stereo/  
sound is unclear bilingual mode to mono sound (see page 13).  
22  
Specifications  
Model  
TV RF system  
AV-29J314  
AV-29V314  
AV-25V314  
B, G  
AV-21V314  
AV-21W314  
(RF mode)  
(VIDEO mode)  
PAL, SECAM  
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
Colour  
system  
Channel and Frequencies VHF low channel (VL) : 46.25 to 168.25 MHz  
VHF high channel (VH) : 175.25 to 463.25 MHz  
UHF channel (U) : 471.25 to 863.25 MHz  
*
Receives cable channel in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)  
Power input  
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)  
Power consumption  
MAX: 166 W  
AVG: 109 W  
MAX: 166 W  
AVG: 109 W  
MAX: 151 W  
AVG: 102 W  
MAX: 121 W  
AVG: 81 W  
MAX: 121 W  
AVG: 81 W  
Screen size  
(Measured diagonally)  
Audio output  
(Rated power output)  
Speakers  
External input/output  
Picture tube: 727.4 mm Picture tube: 727.4 mm Picture tube: 649.0 mm Picture tube: 546.9 mm Picture tube: 546.9 mm  
Visible area: 676.0 mmVisible area: 676.0 mm Visible area: 597.0 mm Visible area: 508 mm Visible area: 508 mm  
10 W + 10 W  
7 W + 7 W  
(6.5 x 13) cm X2  
VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input  
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input  
VIDEO-3: VIDEO input, AUDIO L/R input  
OUTPUT: VIDEO output, AUDIO L/R output  
Headphone jack: Stereo mini jack (3.5 mm diameter)  
Dimension (W x H x D)  
Weight  
731 X 622 X 494.5 mm  
812 X 584.2 X 520.5 mm  
728 X 536 X 481.5 mm  
649 X 465.5 X 473.5 mm  
649 X 465.5 X 471.5 mm  
42 kg  
41 kg  
33 kg  
24 kg  
24 kg  
Accessories  
• Remote control unit: RM-C1281 X 1  
• AA/R6/UM-3 dry cell battery X 2  
• Matching aerial adapter X 1  
Design and specifications subject to change without notice.  
23  
Specifications (continued)  
Model  
AV-29J534  
AV-29V534  
AV-29V514  
AV-25V514  
AV-21V534  
AV-21V514  
TV RF system  
B, G, I, D, K, M  
Colour system (RF mode and VIDEO mode)  
PAL, SECAM, NTSC 3.58 MHz, NTSC 4.43 MHz  
Channel and Frequencies VHF low channel (VL) : 46.25 to 168.25 MHz  
VHF high channel (VH) : 175.25 to 463.25 MHz  
UHF channel (U) : 471.25 to 863.25 MHz  
*
Receives cable channel in mid band (X to Z, S1 to S10), super band (S11 to S20) and hyper band (S21 to S41)  
Power input  
AC 110 to 240 V, 50/60 Hz (operating AC 90 to 260 V, 50/60 Hz)  
Power consumption  
MAX: 215 W  
AVG: 130 W  
MAX: 215 W  
AVG: 130 W  
MAX: 166 W  
AVG: 109 W  
MAX: 151 W  
AVG: 102 W  
MAX: 143 W  
AVG: 91 W  
MAX: 121 W  
AVG: 81 W  
Screen size  
Picture tube: 727.4 mm Picture tube: 727.4 mm Picture tube: 727.4 mm Picture tube: 649.0 mm Picture tube: 546.9 mm Picture tube: 546.9 mm  
(Measured diagonally)  
Visible area: 676.0 mm Visible area: 676.0 mm Visible area: 676.0 mm Visible area: 597.0 mm Visible area: 508 mm  
Visible area: 508 mm  
Audio output  
(Rated power output)  
7 W + 7 W + 13 W  
7 W + 7 W  
10 W + 10 W  
7 W + 7 W  
7 W + 7 W + 13 W  
(6.5 x 13) cm X 2  
(Ø 13) cm X 1  
Speakers  
(6.5 x 13) cm X 2  
(Ø 13) cm X 1  
(6.5 x 13) cm X 2  
(6.5 x 13) cm X 2  
External input/output  
VIDEO-1: S-VIDEO input, VIDEO input, AUDIO L/R input  
VIDEO-2/COMPONENT: VIDEO input, AUDIO L/R input, COMPONENT VIDEO (Y/CB/CR) input  
VIDEO-3: VIDEO input, AUDIO L/R input  
OUTPUT: VIDEO output, AUDIO L/R output  
Headphone jack: Stereo mini jack (3.5 mm diameter)  
Dimension (W x H x D)  
Weight  
731 X 622 X 494.5 mm  
812 X 584.2 X 520.5 mm 812 X 584.2 X 520.5 mm 728 X 536 X 481.5 mm  
649 X 478 X 473.5 mm  
649 X 465.5 X 473.5 mm  
44.4 kg  
43.4 kg  
41 kg  
33 kg  
26.4 kg  
24 kg  
Accessories  
Remote control unit: RM-C1281 X 1  
AA/R6/UM-3 dry cell battery X 2  
Matching aerial adapter X 1  
Design and specifications subject to change without notice.  
0604-FLE-JMT  
© 2004 Victor Company of Japan, Limited  

IBM T 55A User Manual
KitchenAid Cooktop ICS300RS02 User Manual
Motorola C51 Series User Manual
Motorola S1204 User Manual
NEC AccuSync LCD200VX User Manual
Panasonic CT 20SX11 User Manual
Philips 21PT4224 User Manual
Philips 28PT7308 User Manual
Philips 240BW8 User Manual
Philips Brilliance 230C1HSB User Manual