LG Electronics LG Life Good Computer Monitor M228WA User Manual

User’s Guide  
M198WA  
M208WA  
M228WA  
Make sure to read the Safety Precautions before using the product.  
Keep the User's Guide(CD) in an accessible place for furture reference.  
See the label attached on the product and give the information to your dealer when you ask  
for service.  
Safety Precautions  
Electrical Power Related Precautions  
Warning  
Make sure to connect the power cable to the grounded current.  
- You may be electrocuted or injured.  
Use the rated voltage only.  
- The product can be damaged, or you may be electrocuted.  
During a thunder or lightning storm, unplug the power cable or signal cable.  
- You may be electrocuted or a fire can break out.  
Do not connect several extension cords, electrical appliances or electrical heaters to a single outlet.  
Use a power bar with a grounding terminal designed for exclusive use with the computer.  
- A fire can break out due to overheating.  
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry  
the power plug completely or wipe dust off.  
- You may be electrocuted due to excess moisture.  
If you don’t intend to use the product for a long time, unplug the power cable from the product.  
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.  
Fix the power cable completely.  
- If the power cable is not fixed completely, a fire can break out.  
Hold the plug when pulling out the power cable. Do not bend the power cord with excessive force or put  
heavy objects on the power cord.  
- The power line can be damaged, which may cause electric shock or fire.  
Do not insert a conductor (like a metal chopstick) into one end of the power cable while the other end is  
connected to the input terminal on the wall. Additionally, do not touch the power cable right after  
plugging into the wall input terminal.  
- You may be electrocuted.  
The power supply cord is used as the main disconnection device. Ensure that the socket-outlet is easily  
accessible after installation.  
Caution  
Do not unplug the power cord while the product is in use.  
- Electrical shock can damage the product.  
Precautions in Moving the Product  
Warning  
Make sure to turn off the product.  
- You may be electrocuted or the product can be damaged.  
Make sure to remove all cables before moving the product.  
- You may be electrocuted or the product can be damaged.  
2
Safety Precautions  
Caution  
Do not shock the product when moving it.  
- You may be electrocuted or the product can be damaged.  
Do not dispose the product-packing box. Use it when you move.  
Make the panel face forward and hold it with both hands to move.  
- If you drop the product, the damaged product can cause electric shock or fire. Contact with the service center  
for repair.  
Precautions in Using the Product  
Warning  
Do not disassemble, repair or modify the product at your own discretion.  
- Fire or electric shock accident can occur.  
- Contact the service center for check, calibration or repair.  
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent  
scratching. Do not clean with a wet cloth.  
Keep the product away from water.  
- Fire or electric shock accident can occur.  
Caution  
Do not put or store inflammable substances near the product.  
- There is a danger of explosion or fire due to careless handling of the inflammable substances.  
When cleaning the brown tube surface, unplug the power cord and scrub with soft cloth to prevent  
scratching. Do not clean with a wet cloth.  
- The water can sink into the product, which can cause electric shock or serious malfunction.  
Take a rest from time to time to protect your vision.  
Keep the product clean at all times.  
Take a comfortable and natural position when working with a product to relax the muscles.  
Take a regular break when working with a product for a long time.  
Do not press strongly upon the panel with a hand or sharp object such as nail, pencil or pen, or make  
a scratch on it.  
Keep the proper distance from the product.  
- Your vision may be impaired if you look at the product too closely.  
Set the appropriate resolution and clock by referring to the User’s Guide.  
- Your vision can be impaired.  
Use authorized detergent only when cleaning the product. (Do not use benzene, thinner or alcohol.)  
- Product can be deformed.  
On Disposal  
The fluorescent lamp used in this product contains a small amount of mercury.  
Do not dispose of this product with general household waste.  
Disposal of this product must be carried out in accordance to the regulations of your local authority.  
3
Before Connecting to the PC  
Connecting the stand  
Before setting up the product, ensure that the power supply, the computer system,  
and other attached devices is turned off.  
1.  
2.  
3.  
4.  
Place the monitor with its front facing downward on a soft cloth.  
Connect the Stand Base to the Stand Body and press latches at the button toward each end.  
Connect the Stand, assembled in step 2, to the Monitor Panel until you hear a "Click".  
Once assembled take the monitor up carefully and face the front side  
Stand Body  
Stand Base  
2.  
3.  
Stand  
Slot  
Important  
Once you connect the stand base, try not to disconnect it.  
Do not carry the product upside down holding only the stand base. The product may  
fall and get damaged or injure your foot.  
4
Before Connecting to the PC  
Before setting up the product, ensure that the power supply, the computer system,  
and other attached devices is turned off.  
Positioning your display  
1. Adjust the position of the panel in various ways for maximum comfort.  
Tilt Range : -3˚~10˚  
Swivel : 350˚  
Warning:  
When adjusting the angle of the screen, do not put your  
finger(s) in between the head of the monitor and the stand  
body. You can hurt your finger(s).  
Theft prevention locking device  
COMPONENT IN  
Locking Device  
Use this locking cable (This has to be purchased  
separately if required.) to prevent theft.  
5
Name and Function of the Parts  
Name of the Remote Control Buttons (A Type)  
POWER  
TV : TV button  
INPUT  
POWER  
INPUT  
TV  
Input  
Each time you press the Input button it will  
change to  
TV  
AV1  
AV2  
TV  
AV1  
RGB  
AV2  
DVI.  
Component  
Component  
RGB  
DVI  
If nothing is inputted for several seconds the  
screen will automatically move to the  
selected menu.  
LIST  
Q.VIEW  
OK  
PSM  
SSM  
Number buttons  
Able to directly select and change channel.  
MUTE  
TEXT  
PR  
OK  
LIST : Programme list  
To display the programme list (0~ 99).  
Programme List  
VOL  
VOL  
0
1
2
3
4
C
C
C
C
C
01  
35  
05  
11  
04  
5
6
7
8
9
C
C
C
C
C
07  
50  
51  
41  
63  
PR  
OK MENU  
Note: TV channels displayed in blue have been setup  
to be skipped in the Programme Edit menu.  
NOTE : In case of weak stereo  
sound signals, with stereo or  
Nicam stereo transmission,  
select mono reception.  
Q.VIEW : QUICK VIEW Button  
To display the previously selected TV channel  
Inserting batteries into remote control.  
1. Take out the battery cap.  
2. Insert the batteries with correct polarity (+/-).  
3. Close the battery cap.  
Dispose of used batteries in the recycle bin to prevent environmental pollution.  
6
Name and Function of the Parts  
Name of the Remote Control Buttons  
PSM  
SSM  
MUTE  
MUTE  
TEXT  
PR  
OK  
Switches the sound on or off.  
PSM (Picture Status Memory) Button  
Press repeatedly to select Dynamic, Standard, Mild, Game or User  
picture mode.  
VOL  
VOL  
SSM (Sound Status Memory) Button  
Use this button to select the sound tone.  
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.  
PR  
TEXT  
To select the teletext on or off. The main index page or the last  
selected page appears on the screen together with an information  
headline and an option line at the bottom of the screen.  
SIZE  
MIX  
TIME  
HOLD  
REVEAL  
INDEX MODE  
UPDATE  
X
M
?
i
PR (  
Able to change channel.  
VOL ( ) Buttons  
) Buttons  
Able to adjust sound.  
OK Button  
Use when functional adjustment is completed.  
MENU  
Use this button to enter the On Screen Display menu.  
SLEEP : SLEEP Timer  
You can set a time period after which the  
TV / AV / RGB / Component / DVI should switch itself to standby.  
Press the key repeatedly to select the number of minutes.  
_ _ _ (off)  
240  
10  
20  
30  
90  
60  
180  
120  
7
Name and Function of the Parts  
Name of the Remote Control Buttons  
PSM  
SSM  
ARC  
To select the image size of the screen.  
MUTE  
TEXT  
When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2  
PR  
OK  
When RGB/DVI /Componentmode: 4:3, 16:9  
I/II : Bilingual choice and sound mode selection  
VOL  
VOL  
[TV]  
To switch from Stereo to Mono sound in case of stereo transmission,  
or from Nicam Stereo to Nicam Mono, in case of digital transmission.  
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual  
I+II in case of Nicam Dual transmission.  
to choose between Dual I, Dual II or Dual I+II in case of  
bilingual transmission :  
PR  
Dual I sends the primary broadcast language to the  
loudspeakers ;  
SIZE  
Dual II sends the secondary broadcast language to the  
loudspeakers ;  
MIX  
TIME  
HOLD  
Dual I+II sends a separate language to each loudspeakers.  
[AV / Component]  
REVEAL  
INDEX MODE  
UPDATE  
X
M
?
i
In AV/Component mode, you can select output sound for the left and  
right loudspeakers. Repeatedly press the I/II button to  
select the sound output.  
L+R : Audio signal from audio L input is sent to left  
loud-speaker and audio signal from audio R input is  
sent to right loud-speaker.  
L+L : Audio signal from audio L input is sent to left and right  
loud-speakers.  
R+R : Audio signal from audio R input is sent to left and  
right loud-speakers.  
8
Name and Function of the Parts  
Remote Control - Using the Teletext function  
Please select your local teletext language. (page 30)  
If you don't, the teletext may not appear correctly on the screen.  
Yellow key  
PSM  
SSM  
Favourite Program On : Rotate favourite channel  
MUTE  
TEXT  
PR  
OK  
Favourite Program Off : To display the previously  
selected TV channel.  
VOL  
VOL  
HOLD  
Press the button to stop the automatically rotating  
of the sub pages. Press the button again to  
continue the automatic rotating again.  
PR  
SIZE  
Press the button repeatedly to display the upper  
part, the lower part and then to return to the  
normal page size.  
SIZE  
MIX  
TIME  
HOLD  
REVEAL  
INDEX MODE  
UPDATE  
X
M
?
i
MIX  
Display the teletext pages superimposed on  
the TV picture. To switch the TV picture off  
press this button again.  
TIME  
Press this button to select a sub page number.  
The sub page number is displayed at the  
bottom of the screen. To hold or change the  
sub page, press the RED/GREEN,  
or  
NUMBER buttons. Press again to exit this  
function.  
9
Name and Function of the Parts  
Remote Control - Using the Teletext function  
PSM  
SSM  
MUTE  
TEXT  
PR  
OK  
REVEAL  
Press the button to reveal/conceal the hidden  
information, such as solutions to riddles and  
puzzles. Press this button again to remove the  
information from the display.  
VOL  
VOL  
PR  
INDEX  
To display the main index.  
MODE  
SIZE  
MIX  
TIME  
HOLD  
The mode will be switched in the Teletext mode.  
REVEAL  
INDEX MODE  
UPDATE  
X
M
?
i
UPDATE  
Press the button to appear the TV programme.  
At the top of screen indicates that you are still in the  
teletext mode. Before interrupting teletext, you may  
select a page number. When the page has been  
found, the information line appears briefly on your  
screen. Press the button again to reappear teletext.  
10  
Name and Function of the Parts  
Name of the Remote Control Buttons(B Type)  
TV : TV button  
POWER  
INPUT  
TV  
POWER  
INPUT  
MUTE  
Input  
PSM  
SSM  
I/II  
Each time you press the Input button it will  
change to  
TV  
TV  
AV1  
RGB  
AV2  
DVI.  
Component  
AV1  
AV2  
If nothing is inputted for several seconds the  
screen will automatically move to the  
selected menu.  
Component  
RGB  
DVI  
OK  
LIST  
Q.VIEW  
MUTE  
Switches the sound on or off.  
PR  
OK  
PSM (Picture Status Memory) Button  
Press repeatedly to select Dynamic, Standard, Mild, Game or User  
picture mode.  
VOL  
VOL  
SSM (Sound Status Memory) Button  
Use this button to select the sound tone.  
PR  
Press repeatedly to select Flat, Music, Movie, Sports, User sound tone.  
MENU  
SLEEP  
ARC/*  
TEXT  
Number buttons  
Able to directly select and change channel.  
HOLD  
REVEAL  
MIX  
SIZE  
TIME  
NOTE : In case of weak stereo sound signals, with stereo or Nicam stereo  
transmission, select mono reception.  
X
?
i
M
INDEX  
UPDATE  
MODE  
11  
Name and Function of the Parts  
Name of the Remote Control Buttons  
I/II : Bilingual choice and sound mode selection  
POWER  
[TV]  
INPUT  
TV  
To switch from Stereo to Mono sound in case of stereo transmission,  
or from Nicam Stereo to Nicam Mono, in case of digital transmission.  
to switch from Nicam Dual I to Nicam Dual II or Nicam Dual I+II in  
case of Nicam Dual transmission.  
MUTE  
PSM  
SSM  
I/II  
to choose between Dual I, Dual II or Dual I+II in case of bilingual  
transmission :  
Dual I sends the primary broadcast language to the loudspeakers ;  
Dual II sends the secondary broadcast language to the loudspeakers ;  
Dual I+II sends a separate language to each loudspeakers.  
[AV / Component]  
In AV/Component mode, you can select output sound for the left and  
right loudspeakers. Repeatedly press the I/II button to  
select the sound output.  
LIST  
Q.VIEW  
L+R : Audio signal from audio L input is sent to left  
loud-speaker and audio signal from audio R input is  
sent to right loud-speaker.  
PR  
OK  
VOL  
VOL  
L+L : Audio signal from audio L input is sent to left and right  
loud-speakers.  
R+R : Audio signal from audio R input is sent to left and  
right loud-speakers.  
PR  
MENU  
SLEEP  
ARC/*  
TEXT  
LIST : Programme list  
To display the programme list (0~ 99).  
Programme List  
0
1
2
3
4
C
C
C
C
C
01  
35  
05  
11  
04  
5
6
7
8
9
C
C
C
C
C
07  
50  
51  
41  
63  
HOLD  
REVEAL  
MIX  
SIZE  
TIME  
X
?
i
M
INDEX  
UPDATE  
MODE  
OK MENU  
Note: TV channels displayed in blue have been setup  
to be skipped in the Programme Edit menu.  
Q.VIEW : QUICK VIEW Button  
To display the previously selected TV channel  
12  
Name and Function of the Parts  
Name of the Remote Control Buttons  
LIST  
Q.VIEW  
PR (  
Able to change channel.  
VOL ( ) Buttons  
) Buttons  
PR  
OK  
VOL  
VOL  
Able to adjust sound.  
OK Button  
Use when functional adjustment is completed.  
PR  
MENU  
SLEEP  
ARC/*  
TEXT  
MENU  
Use this button to enter the On Screen Display menu.  
SLEEP : SLEEP Timer  
You can set a time period after which the  
HOLD  
MIX  
SIZE  
TIME  
TV / AV / RGB / Component / DVI should switch itself to standby.  
Press the key repeatedly to select the number of minutes.  
X
?
REVEAL  
i
M
INDEX  
UPDATE  
MODE  
_ _ _ (off)  
10  
20  
30  
90  
60  
240  
180  
120  
ARC  
To select the image size of the screen.  
When TV / AV mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2  
When RGB/DVI /Componentmode: 4:3, 16:9  
TEXT  
To select the teletext on or off. The main index page or the last  
selected page appears on the screen together with an information  
headline and an option line at the bottom of the screen.  
13  
Name and Function of the Parts  
Remote Control - Using the Teletext function  
Please select your local teletext language. (page 30)  
If you don't, the teletext may not appear correctly on the screen.  
Yellow key  
Favourite Program On : Rotate favourite channel  
Favourite Program Off : To display the previously  
LIST  
Q.VIEW  
selected TV channel.  
PR  
OK  
VOL  
VOL  
HOLD  
Press the button to stop the automatically rotating  
of the sub pages. Press the button again to  
continue the automatic rotating again.  
PR  
MENU  
SLEEP  
ARC/*  
TEXT  
SIZE  
Press the button repeatedly to display the upper  
part, the lower part and then to return to the  
normal page size.  
HOLD  
MIX  
SIZE  
TIME  
X
?
REVEAL  
i
M
INDEX  
UPDATE  
MODE  
MIX  
Display the teletext pages superimposed on  
the TV picture. To switch the TV picture off  
press this button again.  
TIME  
Press this button to select a sub page number.  
The sub page number is displayed at the  
bottom of the screen. To hold or change the  
sub page, press the RED/GREEN,  
or  
NUMBER buttons. Press again to exit this  
function.  
14  
Name and Function of the Parts  
Remote Control - Using the Teletext function  
LIST  
Q.VIEW  
REVEAL  
PR  
OK  
Press the button to reveal/conceal the hidden  
information, such as solutions to riddles and  
puzzles. Press this button again to remove the  
information from the display.  
VOL  
VOL  
PR  
INDEX  
MENU  
SLEEP  
ARC/*  
TEXT  
To display the main index.  
MODE  
HOLD  
MIX  
SIZE  
TIME  
The mode will be switched in the Teletext mode.  
X
?
REVEAL  
i
M
INDEX  
UPDATE  
MODE  
UPDATE  
Press the button to appear the TV programme.  
At the top of screen indicates that you are still in the  
teletext mode. Before interrupting teletext, you may  
select a page number. When the page has been  
found, the information line appears briefly on your  
screen. Press the button again to reappear teletext.  
15  
Name and Function of the Parts  
Rear View  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV IN  
2
P
B
PR  
Y
L
R
VIDEO  
COMPONENT IN  
AUDIO  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV IN 2  
P
B
PR  
Y
L
R
VIDEO  
COMPONENT IN  
AUDIO  
Power Connector : Connect the power cord.  
SCART Input/Output Terminal  
AV Input Terminal  
DVI Digital Signal Connector  
D-Sub Analog Signal Connector  
RGB, DVI Sound Jack : Connect to the jack in the PC sound card or D-TV sound Output Jack.  
TV Tuner Jack : Connect the antenna.  
Headphone/Earphone Connection Terminal  
Component Input Terminal  
16  
Name and Function of the Parts  
AV Input Terminal  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV IN 2  
Video Input Terminal  
Audio Input Terminal  
S-Video Input Terminal  
17  
Connecting to External Devices  
Connecting to your PC  
First of all, see if the computer, product and the peripherals are turned off.  
Then, connect the signal input cable.  
1.  
Rear side of the product.  
A
UDIO  
DVI IN  
RGB(PC/DTV) IN  
(RGB/DVI) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV  
IN  
2
Y
P
B
P
R
L
R
VIDEO  
COMPONENT IN  
AUDIO  
Connecting with the D-Sub signal input cable.  
A
RGB(PC/DTV) IN  
Rear side of the product  
.
Macintosh Adapter (Not included)  
Use the standard Macintosh adapter since an  
incompatible adapter is available in the market.  
(Different signaling system)  
Connecting with the DVI signal input cable.  
B
DVI IN  
Rear side of the product.  
Connect the audio cable.  
2.  
AUDIO  
Audio cable  
(RGB/DVI) IN  
Rear side of the product.  
Make sure to check the sound card connection terminal in the PC before connecting to the product.  
If the PC sound card supports both Speaker Out and Line Out, change it to Line Out by setting the jumper  
or the PC application. (For more details, refer to the sound card users guide.)  
- Speaker Out : The terminal connected to the speaker that is not equipped with an amplifier.  
- *Line Out : The terminal connected to the speaker equipped with an amplifier.  
If Audio Out in the PC sound card has only Speaker Out, reduce the PC volume. This product is integrated  
with an amplifier.  
18  
Connecting to External Devices  
Connect the power cord.  
3.  
Rear side of the product.  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV IN  
2
P
B
P
R
L
R
Y
VIDEO  
COMPONENT IN  
AUDIO  
Turn on power by pressing the power button on the product.  
1
4.  
5.  
Power button  
Turn on the PC.  
2
Select an input signal.  
Press the INPUT button on the remote control to select the input signal.  
INPUT OK  
Or, press the INPUT button at the top side of the product.  
INPUT OK  
Select RGB  
A
Input  
Input  
Select DVI  
B
TV  
TV  
AV1  
AV1  
AV2  
AV2  
Component  
RGB  
DVI  
Component  
RGB  
DVI  
OK  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
AV1  
AV2  
Note  
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.  
19  
Connecting to External Devices  
Connecting to VCR/DVD  
Connect the video/audio cable as shown in the figure below and then connect the power  
cord (See page 19).  
1.  
When using the S-Video cable.  
A
When using the RCA cable.  
B
Connect to the S-Video input terminal to  
Connect the input terminal with a  
watch high image quality movies.  
proper colour match.  
Rear side of the Product  
Rear side of the Product  
L
R
S-VIDEO  
L
R
S-VIDEO  
AUDIO  
AUDIO  
(MONO)  
(MONO)  
VIDEO  
VIDEO  
AV IN 2  
AV IN 2  
S-Video Cable  
(Not included)  
RCA Cable  
RCA Cable  
(Not included)  
(Not included)  
AUDIO  
OUT  
VIDEO  
OUT  
VIDEO  
OUT  
AUDIO  
OUT  
VCR/DVD  
VCR/DVD  
Note  
In case the RCA cable is connected simultaneously as S-Video cable is connected, S-Video cable is first.  
20  
Connecting to External Devices  
When using the SCART cable.  
C
Rear side of the Product  
AV1  
SCART Cable  
Please, use shielded scart cable.  
(Not Included)  
VCR / DVD  
Select an input signal.  
2.  
Press the INPUT button on the remote control to select the input signal.  
INPUT  
Or, press the INPUT button at the top side of the product.  
INPUT OK  
OK  
When connecting with a SCART cable.  
When connecting with a RCA cable.  
C
A
B
Select AV2  
When connecting with a S-Video cable.  
Select AV2  
Select AV1  
Input  
Input  
TV  
AV1  
AV2  
TV  
AV1  
AV2  
Component  
RGB  
DVI  
Component  
RGB  
DVI  
OK  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
AV1  
AV2  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
21  
Connecting to External Devices  
Connecting to Set-top Box /DVD (480p/576p/720p/1080i/480i/576i)  
Connect the video/audio cable as shown in the figure below and then connect the power  
cord (See page 19).  
1.  
Connect the input terminal with a proper colour match.  
Rear side of the Product  
PB  
PR  
Y
L
R
VIDEO  
AUDIO  
COMPONENT IN  
Component Cable  
(Not included)  
Audio Cable  
(Not included)  
Pb  
Pr  
Y
L
R
VIDEO  
COMPONENT IN  
AUDIO  
Set-top Box /DVD  
Select an input signal.  
2.  
Press the INPUT button on the remote control to select the input signal.  
INPUT OK  
Or, press the INPUT button at the top side of the product.  
INPUT  
OK  
Input  
TV  
AV1  
Select Component  
AV2  
Component  
RGB  
DVI  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
AV1  
AV2  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
22  
Connecting to External Devices  
When watching RGB/DVI from the DVD/Set-top Box  
Connect the D-sub cable, RCA/PC cable as shown in the below figure  
and then connect the power cord. (see page 19)  
1.  
A
B
[Rear side of the Product]  
[Rear side of the Product]  
AUDIO  
(RGB/DVI) IN  
AUDIO  
DVI IN  
RGB(PC/DTV) IN  
RGB(PC/DTV) IN  
(RGB/DVI) IN  
RCA-Stereo cable  
(not included)  
RCA-Stereo cable  
(not included)  
DVI cable  
D-Sub cable  
[Set-top Box/DVD]  
Select an input signal.  
Press the INPUT button on the remote control to select the input signal.  
INPUT OK  
Or, press the INPUT button at the top side of the product.  
INPUT OK  
[Set-top Box/DVD]  
2.  
Input  
Select DVI  
Input  
B
Select RGB  
A
TV  
AV1  
AV2  
TV  
AV1  
AV2  
Component  
RGB  
DVI  
Component  
RGB  
DVI  
OK  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
AV1  
AV2  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
23  
Connecting to External Devices  
When Watching TV  
1.  
Check if the antenna cable is connected at the rear side of the product  
and then, connect the power cord.  
Rear Side of the Product  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV IN  
2
P
B
PR  
Y
L
R
VIDEO  
COMPONENT IN  
AUDIO  
ANTENNA IN  
Antenna Cable  
(Not included.)  
2.Select an input signal.  
Press the INPUT button on the remote control to select the input signal.  
INPUT  
OK  
Or, press the INPUT button at the top side of the product.  
Input  
INPUT  
Select TV  
OK  
TV  
AV1  
AV2  
Component  
RGB  
DVI  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
AV1  
AV2  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
24  
To arrange cables using cable management  
Arrange the cables in the center as shown in the following picture.  
1.  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
R
VIDEO  
O  
V
AV1  
H/P  
2
P
B
PR  
Y
L
R
DEO  
COMPONENT IN  
AUDIO  
Fit the cable management to the Holder Groove downwards.  
2.  
ANTENNA IN  
R
VIDEO  
IO  
AV1  
H/P  
2
P
B
PR  
Y
L
R
IDEO  
COMPONENT IN  
AUDIO  
cable  
H
S
U
P
management  
T
N
E
EM  
G
A
A
N
B
L
E
M
C
A
* When you want remove it.  
H
S
PU  
PUSH  
GEMENT  
A
M
A
N
L
E
C
A
B
GEMENT  
A
A
N
M
L
E
C
A
B
Push up slightly to remove it.  
Push down slightly.  
Warning  
Do not use the cable management as a handle for the Monitor.  
Do not press the cable management.  
25  
Adjusting the Screen  
Name of the Buttons in the Screen Adjustment Unit  
A
UDIO  
DVI IN  
RGB(PC/DTV) IN  
(RGB/DVI) IN  
ANTENNA IN  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV  
IN  
2
Y
P
B
P
R
L
R
VIDEO  
COMPONENT IN  
AUDIO  
INPUT MENU  
OK  
VOL  
PR  
This Indicator lights up blue when the display operates normally  
(On Mode). If the display is in Sleep (Energy Saving) Mode, this  
indicator colour changes to amber.  
Power Indicator  
Power Button  
Use this button to turn the product on and off.  
Use this button to show/hide the OSD (On Screen Display) menu  
screen.  
MENU Button  
Use this button to select an icon or adjust the setting in the OSD screen.  
OSD Select/Adjust Button  
Use this button to control the channel for the TV signal.  
Volume  
Adjust the volume.  
30  
26  
Adjusting the Screen  
Name of the Buttons in the Screen Adjustment Unit  
OK button is usually used in choosing the MENU.  
OK Button  
When there is no MENU on the screen pushing the OK button will  
give the information about the current input source.  
Input  
INPUT Button  
TV  
Television  
TV  
AV1  
AV2  
Component  
RGB  
DVI  
SCART  
CVBS, S-Video  
HDTV, DVD  
D-Sub analog signal  
DVI Digital signal  
AV1  
AV2  
Component  
RGB  
DVI  
OK  
Each time you press the Input button it will change to TV  
Component RGB DVI  
If nothing is inputted for several seconds the screen will automatically move to the selected menu.  
AV1  
AV2  
IR Receiver  
The unit that receives the signal from the remote control.  
27  
Adjusting the Screen  
OSD (On Screen Display) Menu  
Icon  
Function Description  
Set/Select the channel when using the TV  
Station  
Picture  
Sound  
Adjusting the picture function.  
Adjusting the sound function.  
Adjusting the time function.  
Selecting the special function.  
Time  
Special  
Screen  
Adjusting the screen function.  
Note  
OSD(On Screen Display)  
The OSD function enables you to adjust the screen status conveniently since it provides graphical  
presentation.  
28  
Adjusting the Screen  
OSD (On Screen Display) Screen Tracking Order  
PR  
PR  
A type  
OK  
OK  
OK  
OK  
VOL  
VOL  
VOL  
VOL  
PR  
PR  
Pop up the  
menu screen  
Move where  
you want to  
adjust  
Select a menu icon  
Adjust the status  
Save  
adjustment  
Exit from the  
menu screen.  
Use the remote control to adjust the OSD screen.  
B type  
PR  
PR  
MENU  
MENU  
VOL  
VOL  
VOL  
OK  
OK  
OK  
VOL  
OK  
PR  
PR  
Pop up the  
menu screen  
Move where  
you want to  
adjust  
Select a menu icon  
Adjust the status  
Save  
adjustment  
Exit from the  
menu screen.  
Use the remote control to adjust the OSD screen.  
1
2
3
4
5
6
Press the MENU Button, then the main menu of the OSD will appear.  
To access a control, use the  
Buttons.  
When the icon you want becomes highlighted, press the OK Button.  
Use the  
Buttons to adjust the item to the desired level.  
Accept the changes by pressing the OK Button.  
Exit the OSD by pressing the MENU Button repeatedly  
.
29  
Adjusting the Screen  
On-Screen Menu Language / Country Selection  
Installation guide menu appears on product screen when it is turned on for the first time.  
Installation guide  
Language  
Chesky  
Dansk  
Nederlands  
Norsk  
Deutsch  
English  
Español  
Français  
Italiano  
Magyar  
Polski  
Português  
–”——K»…  
Romaneste  
suomi  
Svenska  
OK MENU  
1. Press the  
2. Press the  
button and then, OK button to select your desired language.  
button and then, OK button to select your country.  
* If you want to change Language/ Country selection  
1. Press the MENU button and then  
button to select the Special menu.  
2. Press the button and then  
button to select Language.  
The menus can be shown on the screen in the selected language.  
Or, Press the button and then  
3. Press the button and then  
4. Press the OK button.  
button to select Country.  
button to select your desired language or country.  
5. Press the MENU button repeatedly to return to normal TV viewing.  
Note  
If you don't finish set up Installation Guide by pressing MENU button or time out of OSD  
(On Screen Display) display, it will continuously appear until completing set up whenever  
the set is turned on.  
If you select wrong local country, the teletext may not appear correctly on the screen and  
some problem may happen during teletext operation.  
Hebrew is added to Country of Installation Guide according to the countries which using  
Hebrew languages.  
30  
Adjusting the Screen  
STATION ID set/Select the channel when using the TV  
Auto programme  
Station  
Auto programme  
Manual programme  
Programme edit  
To set  
Favourite programme  
OK MENU  
System  
It should be set before run auto searching.  
Press the  
buttons to select the TV system of the country or part of the  
world from where you want to receive the TV channels.  
* Supporting channel : C(V/UHF 02~69) S(Cable 01~41)  
BG : PAL B/G, SECAM B/G (Europe/East Europe)  
I : PAL I/II (U.K/Ireland)  
DK : PAL D/K, SECAM D/K (East Europe)  
L: SECAM L/L' (France)  
Storage  
from  
To select a programme number or enter the programe number with the  
number buttons from where you want to start searching for new channels.  
If e.g. you want to keep the channels 1 to 10 stored earlier, enter programe  
number 11. Your TV search for new channels from number 11 onwards.  
* Numbers available to store : 0~99  
Press OK or  
button to start automatic programming. All available TV  
Search  
channels will be searched and stored automatically. To stop auto  
programming, press the MENU button. When auto programming is  
completed, the programme list menu appears.  
Manual programme  
Station  
Auto programme  
Manual programme  
Programme edit  
To change the channel.  
(Change each item in Manual  
Program and press the "MENU"  
button to save the settings)  
To set  
Favourite programme  
OK MENU  
Press the  
buttons to select the channel number or enter the  
Storage  
System  
programme number with the number buttons in where you want to store  
channel.  
Press the  
buttons to select the TV system of the country or part of  
the world from where you want to receive the TV channels.  
BG : PAL B/G, SECAM B/G (Europe/East Europe)  
I : PAL I/II (U.K/Ireland)  
DK : PAL D/K, SECAM D/K (East Europe)  
L: SECAM L/L' (France)  
31  
Adjusting the Screen  
STATION ID set/Select the channel when using the TV  
Press the  
cable channels.  
buttons to select VHF/UHF for aerial channels or Cable for  
Band  
To select the channel reception type. : VHF/UHF / Cable.  
If you know the channel number, enter it directly with the digit buttons 0 to 9.  
Channel  
Fine  
In case of poor reception, you can improve the reception by fine tuning. Use  
the  
buttons to fine tune for the best picture and sound.  
Search  
Name  
Use the  
buttons to search next channel backward or forward direction.  
To see the assigned channel name.  
It is possible to change the name stored in the memory or to assign a name  
to a TV channel which has not yet been entered. A name with up 5 letters or  
numbers can be given to the programme numbers 0 to 99.  
Press the  
buttons to move cursor to be changed. -> Press the  
buttons to select a character.(space, number 0~9, and alphabet A~Z, +,-) ->  
Press OK button or MENU button.  
Programme edit  
Programme edit  
Station  
0
1
2
3
4
C
C
C
C
C
01  
35  
05  
11  
04  
5
6
7
8
9
C
C
C
C
C
07  
50  
51  
41  
63  
Auto programme  
Manual programme  
Programme edit  
To set  
Favourite programme  
Delete  
Move  
Copy  
Skip  
OK MENU  
OK MENU  
Press the  
buttons to select a TV channel to be deleted. ->  
Delete  
Press the red key on the remote control -> The background colour of  
the selected channel will change to red.  
Press the Delete button one more time to delete the selected channel.  
All the following channels are shifted up one position.  
Copy  
Move  
Press the  
buttons to select a TV channel to be copied. ->  
Press the green key on the remote control. All the following channel  
numbers are shifted down one position.  
Press the  
buttons to select a channel number to be moved. ->  
Press the yellow key on the remote control. -> Press the  
buttons to move the TV channel to the desired channel number. ->  
Press the yellow key again to release this function.  
Skip  
Press the  
buttons to select a channel number to be skipped. ->  
Press the blue key on the remote control. The skipped TV channel is  
displayed in blue.  
32  
Adjusting the Screen  
STATION ID set/Select the channel when using the TV  
Station  
Favourite  
programme  
Off  
_ _  
_ _  
_ _  
_ _  
_ _  
_ _  
_ _  
_ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
_ _ _ _ _  
Auto programme  
Manual programme  
Programme edit  
Favourite programme  
OK MENU  
This function lets you select your favourite programmes directly. (8 channel)  
Press the  
buttons to select a channel.  
*
Yellow key (remote control) :  
Favourite Program On : Rotate favourite channel  
Favourite Program Off : To display the previously selected TV channel.  
33  
Adjusting the Screen  
PICTURE ID adjust the picture function(RGB/DVI)  
PSM  
The PSM function automatically adjusts the screen  
image quality.  
Picture  
Dynamic  
Dynamic  
Standard  
Mild  
PSM  
CSM  
XD  
Cinema  
Reset  
Select this option to display with a sharp image.  
Standard  
The most general and natural screen display status.  
Mild  
Game  
User  
Select this option to display with a mild image.  
Game  
OK MENU  
Select this option to enjoy dynamic image when  
playing a game.  
User  
Select this option to use the user-defined settings.  
CSM  
The CSM function automatically adjusts the screen  
colour set.  
Picture  
9300K  
Slightly purplish white.  
6500K  
Slightly bluish white.  
sRGB  
Slightly lower brightness.  
User  
Select this option to use the user-defined settings.  
Red / Green / Blue  
PSM  
CSM  
XD  
Cinema  
Reset  
9300K  
6500K  
sRGB  
User  
OK MENU  
Set your own colour levels.  
XD  
XD is LG Electronics unique picture improving  
technology to display a real HD source through an  
advanced digital signal processing algorithm.  
It's not available to use this function in RGB-PC or  
DVI-PC modes.  
Picture  
PSM  
CSM  
XD  
Cinema  
Reset  
Auto  
Manual is activated after selecting the user of PSM.  
(It's not working RGB-PC, DVI-PC mode.)  
Manual  
OK MENU  
Cinema  
Reset  
(
Function works in the following mode -TV, AV, Component 480i/576i)  
When you watch the movie, this function adjusts the set to the best picture appearance.  
(It's not working RGB/DVI mode.)  
Return to the default settings PSM, CSM, XD, Cinema at the factory.  
34  
Adjusting the Screen  
PICTURE ID adjust the picture function (TV/Video)  
PSM  
The PSM function automatically adjusts the screen  
image quality.  
Picture  
Dynamic  
Dynamic  
Standard  
Mild  
PSM  
CSM  
XD  
Cinema  
Reset  
Select this option to display with a sharp image.  
Standard  
The most general and natural screen display status.  
Mild  
Game  
User  
Select this option to display with a mild image.  
Game  
OK MENU  
Select this option to enjoy dynamic image when  
playing a game.  
User  
Select this option to use the user-defined settings.  
CSM  
The CSM function automatically adjusts the screen  
Picture  
colour set.  
Cool  
Slightly purplish white.  
Normal  
Slightly bluish white.  
Warm  
PSM  
CSM  
XD  
Cinema  
Reset  
Cool  
Normal  
Warm  
User  
Slightly reddish white.  
User  
OK MENU  
Select this option to use the user-defined settings.  
Red / Green / Blue  
Set your own colour levels.  
XD  
Picture  
XD is LG Electronics unique picture improving  
technology to display a real HD source through an  
advanced digital signal processing algorithm.  
It's not available to use this function in RGB-PC or  
DVI-PC modes.  
PSM  
CSM  
XD  
Cinema  
Reset  
Auto  
Manual is activated after selecting the user of PSM.  
Manual  
OK MENU  
Cinema  
Reset  
(
Function works in the following mode - TV, AV, Component 480i/576i)  
When you watch the movie, this function adjusts the set to the best picture appearance.  
Return to the default settings PSM, CSM, XD, Cinema at the factory.  
OK MENU  
35  
Adjusting the Screen  
SOUND ID to adjust the sound function  
Sound  
Flat  
SSM  
AVL  
Balance  
Music  
Movie  
Sports  
User  
0
OK MENU  
The best sound tone quality will be selected automatically depending on the video type that  
you're currently watching.  
SSM  
Flat : The most commanding and natural audio.  
Music : Select this option to enjoy the original sound when listening to the music.  
Movie : Select this option to enjoy sublime sound.  
Sports : Select this option to watch sports broadcasting.  
User : Select this option to use the user-defined audio settings.  
AVL  
To adjust uneven sound volumes across all channels or signals automatically to the most  
appropriate level. To use this feature, select On.  
Use this function to balance sound from the left and right speakers.  
Balance  
36  
Adjusting the Screen  
TIME ID to adjust the time function  
Time  
-- : --  
Clock  
Off time  
On time  
Auto sleep  
OK MENU  
This function is used to set up of current time.  
You must set the time correctly before using On/Off time function.  
Clock  
1) Press the MENU button and then use  
button to select the TIME menu.  
2) Press the  
button and then use  
button and then use  
button and then use  
button to select the Clock menu.  
button to set the hour(00~23).  
button to set the minutes(00~59).  
3
) Press  
) Press  
4
The default value is -- : --.  
5) Press the OK/MENU button to save.  
The Off time automatically switches the set to off mode at the pre-set time.  
Off/On time  
1) Press the MENU button and then use  
button to select the TIME menu.  
button to select Off time or On time.  
button to set the hour(00~23).  
button to set the minutes(00~59).  
button to select On or Off.  
2) Press the  
3) Press the  
4) Press the  
5) Press the  
button and then use  
button and then use  
button and then use  
button and then use  
6) Only On time function; Press the  
and programme number  
7) Press the OK/MENU button to save.  
button and then  
button to adjust volume level  
.
If Auto sleep is active and there is no input signal, the set switches to off mode  
automatically after 10 minutes. ( It is not working in PC)  
Auto sleep  
1) Press the MENU button and then use  
2) Press the button and then use  
3) Press the OK/MENU button to save .  
button to select the Auto sleep menu.  
button to select On or Off.  
In the event of power interruption (disconnection or power failure), the Clock must be reset.  
Two hours after the set is switched on by the On time function it will automatically switch  
back to off mode unless a button has been pressed.  
Note  
Once the On or Off time is set, these functions operate daily at the preset time.  
Off time function overrides On time function if they are set to the same time.  
The set must be in off mode for the On time to work.  
On time will move on to auto off if no activity is received in 2hours after setting the On time.  
37  
Adjusting the Screen  
SPECIAL ID to Select the special function  
Special  
Language  
Country  
Child lock  
DDC-CI  
XD Demo  
OK MENU  
To choose the language in which the control names are displayed  
.
Language  
Country  
Please select your local teletext language.  
If you don't, the teletext may not appear correctly on the screen.  
This feature is not available in all countries.  
Use the  
buttons to select On or Off. It can be set up so that it can only be used with  
Child lock  
the remote control. This feature can prevent unauthorized viewing.  
In order to lock the OSD screen adjustment, set the Child lock tab to the 'On' position.  
In order to unlock it, do the following :  
* Push the MENU button on the remote control and set Child lock to the 'Off' position.  
DDC/CI(Display Data Channel Command Interface) is communication protocol for  
communications between PC and monitor.  
DDC-CI  
DDC/CI makes it possible to adjust and setup detailed functions on PC instead of the monitor  
OSD.  
Monitor can be adjusted with PC by connecting communication between PC and monitor when  
DDC/CI is ON, and monitor cannot be adjusted with PC because communication between PC  
and monitor is disconnected when DDC/CI is OFF.  
Use it to see the difference between XD demo on and XD Demo off.  
(XD Demo function is not available in RGB PC/ DVI PC mode.)  
XD Demo  
38  
Adjusting the Screen  
SCREEN ID to adjust the screen function  
Screen  
To set  
Auto config.  
Manual config.  
ARC  
Reset  
OK MENU  
This button is for the automatic adjustment of the screen Position, Clock and Phase.  
Auto  
(It is not working in RGB-DTV, DVI.)  
config.  
Manual  
config.  
This button is for the manual adjustment of the screen Position, Clock and Phase.  
H-Position (It is not working In DVI-PC mode.)  
To move the displayed image left or right.  
V-Position (It is not working In DVI-PC mode.)  
To move the displayed image up or down.  
Clock (It is not working In RGB-DTV, DVI mode.)  
To minimize any vertical bars or stripes visible on the screen background.  
The horizontal screen size will also change.  
Phase (It is not working In RGB-DTV, DVI mode.)  
To adjust the focus of the display. This item allows you to remove any horizontal noise  
and clear or sharpen the image of characters.  
To select the image size of the screen.  
ARC  
When TV/Video mode: Spectacle, Original, 4:3, 16:9, 14:9, Zoom1, Zoom2  
When RGB/DVI/Component mode: 4:3, 16:9  
Use this function to reset the product to the factory default. However, language selection  
will not be initialized.(It is working in RGB-PC, RGB-DTV, DVI-DTV mode.)  
Reset  
39  
Troubleshooting  
No image is displayed  
Check if the power cord is properly connected to  
the outlet.  
Is the product's power cord  
connected?  
See if the power switch is turned on.  
Is the power indicator turning on?  
Adjust brightness and contrast again.  
Power is on, power indicator is blue  
but the screen appears extremely  
dark.  
If the product is in power saving mode, move the  
mouse or press any key.  
Does the power indicator look amber?  
In DVD Player or Settop Box, check the power  
status of connected device.  
The signal from the PC (video card) is out of the  
vertical or horizontal frequency range of the  
product. Adjust the frequency range by referring to  
the Specifications in this user's guide.  
* Maximum resolution  
Does the 'Out of range' message  
appear?  
19 inch : RGB : 1440 X 900 @75 Hz  
DVI : 1440 X 900 @60 Hz  
20.1 inch : 1680 X 1050 @60 Hz  
22 inch : 1680 X1050 @60 Hz  
The signal cable between PC and product is not  
connected. Check the signal cable.  
Press the 'INPUT' button in the remote control to  
check the input signal.  
Does the 'Check signal cable'  
message appear?  
'Unknown Product' message appears when the product is connected.  
Install the product driver, which is provided with  
the product, or download it from the web site.  
(http://www.lge.com)  
Did you install the driver?  
See if the plug&play function is supported by  
referring to the video card user's guide.  
* Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times  
every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second.  
The unit is Hz.  
Note  
* Horizontal frequency: The horizontal interval is the time to display one vertical line. When the 1 is divided by  
horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal  
frequency. The unit is kHz.  
40  
Troubleshooting  
The screen image looks abnormal.  
Adjust the Position menu in OSD .  
Is the screen position wrong?  
See if the video card resolution and frequency  
are supported by the product. If the frequency is  
out of range, set to the recommended resolution  
in the Control Panel Display Setting menu.  
Adjust the Clock menu in OSD.  
Do thin lines appear on the  
background screen?  
Adjust the Phase menu in OSD.  
Horizontal noise appears or the  
characters look blurred.  
After-image appears on the product.  
After-image appears when the  
If you use a fixed image for a long time, the pixels  
may be damaged quickly. Use the screen saver  
function.  
product is turned off.  
41  
Troubleshooting  
The audio function does not work.  
No sound?  
Check if the audio cable is connected properly.  
Adjust the volume.  
Check if the sound is set properly.  
Sound is too low.  
Adjust the volume.  
The TV function does not work.  
The TV signal is not being received.  
See if you have selected the proper channel  
mode.  
Use the automatic channel setup function.  
Check if the TV antenna is properly connected.  
Screen colour is abnormal.  
Screen has poor colour resolution (16  
Set the colour resolution to more than 24 bits (true  
colour)  
colours).  
Select Control Panel Display Settings  
Colour Table menu in Windows.  
Screen colour is unstable or mono-  
Check the connection status of the signal cable.  
Or, re-insert the PC video card.  
colour.  
Do black spots appear on the screen?  
Several pixels (red, green, white or black colour)  
may appear on the screen, which can be  
attributable to the unique characteristics of the  
LCD panel. It is not a malfunction of the LCD.  
42  
Specifications  
The product specifications can change without prior notice for product improvement.  
[19 inch]  
Screen Type  
19 inches Wide (48.14 cm) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel  
Visible diagonal size: 48.14 cm  
0.285 mm  
LCD Panel  
Pixel Pitch  
Max. Resolution  
RGB : 1440 X 900 @75 Hz  
Video Signal  
DVI : 1440 X 900 @60 Hz  
Recommended Resolution 1440 X 900 @60 Hz  
Horizontal Frequency 28 - 83 kHz  
Vertical Frequency  
56 - 75 Hz  
Synchronization Type Separate Sync, Digital  
S-Video, Composite video, TV, D-Sub Analog, DVI-D  
Input Connector  
Power  
SCART, PC Audio In, Headphone/Earphone, component  
Rated Voltage  
AC 100-240V~ 50/60Hz 1.0A  
Power Consumption  
On Mode  
: 50 W (Typ.)  
Sleep Mode 1 W  
Off Mode  
1 W  
Tilt Range  
Swivel  
-3˚ ~ 10˚  
Tilt  
350˚  
Size (WxLxH)  
Weight (excl. package) 4.9 kg (10.8 Ibs)  
456.8 mm x 230.0 mm x 395.0 mm  
Dimension/Weight  
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%  
Environmental Conditions  
Storage Condition  
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%  
43  
Specifications  
The product specifications can change without prior notice for product improvement.  
[20.1 inch]  
Screen Type  
20.1 inches Wide (51.113 cm) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel  
Visible diagonal size: 51.113 cm  
0.258 mm  
LCD Panel  
Pixel Pitch  
Max. Resolution  
RGB : 1680 X 1050 @60 Hz  
Video Signal  
DVI : 1680 X 1050 @60 Hz  
Recommended Resolution 1680 X 1050 @60 Hz  
Horizontal Frequency 28 - 83 kHz  
Vertical Frequency  
56 - 75 Hz  
Synchronization Type Separate Sync, Digital  
S-Video, Composite video, TV, D-Sub Analog, DVI-D  
Input Connector  
Power  
SCART, PC Audio In, Headphone/Earphone, component  
Rated Voltage  
AC 100-240V~ 50/60Hz 1.0A  
Power Consumption  
On Mode  
: 50 W (Typ.)  
Sleep Mode 1 W  
Off Mode  
1 W  
Tilt Range  
Swivel  
-3˚ ~ 10˚  
Tilt  
350˚  
Size (WxLxH)  
Weight (excl. package) 4.8 kg (10.58 Ibs)  
484.3 mm x 230.0 mm x 414.3 mm  
Dimension/Weight  
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%  
Environmental Conditions  
Storage Condition  
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%  
44  
Specifications  
The product specifications can change without prior notice for product improvement.  
[22 inch]  
Screen Type  
22 inches Wide (55.868 cm) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel  
Visible diagonal size: 55.868 cm  
0.282 mm  
LCD Panel  
Pixel Pitch  
Max. Resolution  
RGB : 1680 X1050 @60 Hz  
Video Signal  
DVI : 1680 X1050 @60 Hz  
Recommended Resolution 1680 X1050 @60 Hz  
Horizontal Frequency 28 - 83 kHz  
Vertical Frequency  
56 - 75 Hz  
Synchronization Type Separate Sync, Digital  
S-Video, Composite video, TV, D-Sub Analog, DVI-D  
Input Connector  
Power  
SCART, PC Audio In, Headphone/Earphone, component  
Rated Voltage  
AC 100-240V~ 50/60Hz 1.0A  
Power Consumption  
On Mode  
: 50 W (Typ.)  
Sleep Mode 1 W  
Off Mode  
1 W  
Tilt Range  
Swivel  
-3˚ ~ 10˚  
Tilt  
350˚  
Size (WxLxH)  
Weight (excl. package) 5.82 kg (13 Ibs)  
525.4 mm x 230.0 mm x 439.0 mm  
Dimension/Weight  
Operational Condition Temperature: 10˚C ~ 35˚C , Humidity: 20% ~ 80%  
Environmental Conditions  
Storage Condition  
Temperature: -10˚C ~ 60˚C , Humidity: 5% ~ 90%  
45  
Specifications  
PC Mode Preset Mode  
[19 inch]  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency  
(Hz)  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency  
Preset mode  
Preset mode  
(Hz)  
1
2
3
4
5
6
7
8
9
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
63.981  
79.976  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
11  
12  
13  
1440 x 900  
1440 x 900  
1440 x 900  
55.5  
55.935  
70.635  
60  
60  
75  
10  
* 1~13 : RGB mode * 1~12 : DVI mode  
[20.1 inch] [22 inch]  
Horizontal  
Frequency  
(kHz)  
Vertical  
Frequency  
(Hz)  
Horizontal  
Vertical  
Frequency  
(Hz)  
Frequency  
Preset mode  
Preset mode  
(kHz)  
1
2
3
4
5
6
7
8
9
31.468  
31.469  
37.500  
37.879  
46.875  
48.363  
60.123  
67.500  
63.981  
79.976  
70  
60  
75  
60  
75  
60  
75  
75  
60  
75  
720 x 400  
640 x 480  
640 x 480  
800 x 600  
800 x 600  
1024 x 768  
1024 x 768  
1152 x 864  
1280 x 1024  
1280 x 1024  
11  
12  
1680 x 1050  
1680 x 1050  
64.674  
65.290  
60  
60  
10  
Power Indicator  
DTV -Timming  
Preset mode  
Vertical  
Frequency  
(Hz)  
Horizontal  
Frequency  
(kHz)  
Mode  
Product  
On Mode  
Sleep Mode  
Off Mode  
Blue  
Amber  
Off  
1
2
3
4
5
6
7
8
9
31.47  
31.5  
31.25  
37.5  
44.96  
45  
33.72  
33.75  
28.125  
60  
60  
50  
50  
60  
60  
60  
60  
50  
720 x 480/60p  
720 x 480/60p  
720 x 576/50p  
1280 x 720/50p  
1280 x 720/60p  
1280 x 720/60p  
1920 x 1080/60i  
1920 x 1080/60i  
1920 x 1080/50i  
46  
Specifications  
VESA wall mounting  
This product meets VESA-compliant mounting interface pad specifications.  
1.  
2.  
Put the product on a piece of cloth or other soft surface with the front side facing downward.  
Please pull and remove the stand base while pressing the  
button on the stand body in the direction of the arrows.  
3.  
Please put the stand body up.  
47  
Specifications  
4.  
Please pull and remove the stand body while sliding and holding the latches down.  
5.  
Fasten the screw on the backside of the product and the other one in the joint of the stand.  
6.  
Install the VESA standard wall mounting.  
VESA wall mounting  
Connected to another  
object (stand type and wall-  
mounted type).  
This product accepts a  
VESA-compliant mounting  
interfacepad.  
AUDIO  
(RGB/DVI) IN  
DVI IN  
RGB(PC/DTV) IN  
ANTENNA IN  
(This has to be purchased  
separately if required.)  
For further information,  
refer to the VESA Wall  
Mounting Instruction Guide.  
L
R
S-VIDEO  
AUDIO  
(MONO)  
VIDEO  
AV1  
H/P  
AV IN  
2
Pb  
VIDEO  
COMPONENT IN  
Pr  
L
R
Y
AUDIO  
48  

Iiyama Computer Monitor P1704S User Manual
JVC AV 29SS27 User Manual
JVC I'Art 1204JGI II IM User Manual
Lenovo Computer Hardware Z565 User Manual
Lenovo L222 4432 HF1 User Manual
Logitech Wireless Solar Keyboard K750 User Manual
Measurement Specialties PCI CTR05 User Manual
Mitsubishi Electronics LDT37IV BH544 User Manual
Mitutoyo Crib Toy PH 3500 User Manual
Philips LX3700D User Manual