Mitsubishi Electronics LDT37IV BH544 User Manual

English  
Deutsch  
Español  
Français  
Italiano  
Nederlands  
Index  
Important Information ................................................................................................................................... English-2  
Safety Precautions, Maintenance & Recommended Use ............................................................................ English-4  
Contents....................................................................................................................................................... English-5  
Parts Name and Functions .......................................................................................................................... English-6  
Control Panel .................................................................................................................................. English-6  
Terminal Panel ................................................................................................................................ English-7  
Wireless Remote Control ............................................................................................................... English-8  
Operating Range for the Remote Control ....................................................................................... English-9  
Handling the remote control ........................................................................................................... English-9  
Setup Procedure .......................................................................................................................................... English-10  
How to Mount and Attach Options to the LCD Monitor ................................................................................ English-12  
Connections ................................................................................................................................................. English-13  
Wiring Diagram ............................................................................................................................... English-13  
Connecting a Personal Computer .................................................................................................. English-14  
Connecting with Digital Interface Equipment .................................................................................. English-15  
Connecting a DVD Player with component out............................................................................... English-16  
Connecting to a Stereo Amplifier.................................................................................................... English-17  
Basic Operation............................................................................................................................................ English-18  
Power ON and OFF Modes ............................................................................................................ English-18  
Power Indicator ............................................................................................................................... English-19  
Using Power Management ............................................................................................................. English-19  
Selecting a video source ................................................................................................................ English-19  
Picture Size .................................................................................................................................... English-19  
Picture Mode .................................................................................................................................. English-19  
Information OSD ............................................................................................................................. English-19  
OSD (On-Screen-Display) Controls ............................................................................................................. English-20  
PICTURE ........................................................................................................................................ English-20  
SCREEN......................................................................................................................................... English-21  
AUDIO ............................................................................................................................................ English-22  
PICTURE IN PICTURE .................................................................................................................. English-23  
CONFIGURATION 1 ....................................................................................................................... English-23  
CONFIGURATION 2 ....................................................................................................................... English-25  
ADVANCED OPTION ..................................................................................................................... English-26  
NOTE.............................................................................................................................................. English-27  
Controlling the LCD monitor via RS-232C Remote Control ......................................................................... English-29  
Features ....................................................................................................................................................... English-31  
Troubleshooting ........................................................................................................................................... English-32  
Specifications (LDT321V) ............................................................................................................................ English-33  
Specifications (LDT371V) ............................................................................................................................ English-34  
Pin Assignment ............................................................................................................................................ English-35  
English-1  
Important Information  
DECLARATION OF CONFORMITY  
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may  
not cause harmful interference, and (2) this device must accept any interference received, including interference that may  
cause undesired operation.  
U.S. Responsible Party: Mitsubishi Digital Electronics America, Inc.  
Address:  
9351 Jeronimo Road,  
Irvine, California 92618 U.S.A.  
+1 - (949) 465-6000  
Tel. No.:  
Type of Product:  
Computer Monitor  
Equipment Classification: Class B Peripheral  
Model: LDT321V (BH548) / LDT371V (BJ544)  
We hereby declare that the equipment specified above  
conforms to the technical standards as specified in the FCC Rules.  
Windows is a registered trademark of Microsoft Corporation. All other brands and product names are trademarks or  
registered trademarks of their respective owners.  
Canadian Department of Communications Compliance Statement  
DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-  
tions.  
C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No.  
60950-1.  
FCC Information  
1. Use the attached specified cables with the LDT321V (BH548) / LDT371V (BJ544) color monitor so as not to interfere  
with radio and television reception.  
(1) Please use the supplied power cord or equivalent to ensure FCC compliance.  
(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to 15-pin mini D-SUB.  
2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of  
the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation.  
This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that  
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
• Consult your dealer or an experienced radio/TV technician for help.  
If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.  
The user may find the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify  
and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Office, Wash-  
ington, D.C., 20402, Stock No. 004-000-00345-4.  
English-2  
Important Information  
WARNING  
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE  
THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE  
PRONGS CAN BE FULLY INSERTED.  
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
CAUTION  
CAUTION  
TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM  
WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE  
POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER  
SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
This symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause  
electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.  
This symbol alerts the user that important literature concerning the operation and maintenance of this unit  
has been included. Therefore, it should be read carefully in order to avoid any problems.  
CAUTION  
This LCD Monitor uses a lamp that contains mercury. Disposal of the lamp or the LCD Monitor with the lamp  
may be regulated due to environmental considerations. For disposal or recycling information, please contact  
Declaration  
Declaration of the Manufacturer  
We hereby certify that the color monitor LDT321V(BH548)/  
and marked with  
LDT371V(BJ544) is in compliance with  
Council Directive 73/23/EEC:  
– EN 60950-1  
Council Directive 89/336/EEC:  
– EN 55022  
Mitsubishi Electric Corporation  
2-7-3, Marunouchi,  
– EN 61000-3-2  
– EN 61000-3-3  
Chiyoda-Ku  
Tokyo 100-8310, Japan  
– EN 55024  
Declaration of the Manufacturer  
Note: This symbol mark is EU countries only.  
This symbol mark is according to the directive 2002/96/EC Article 10 Information for  
users and Annex IV.  
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality  
materials and components which can be recycled and reused.  
This symbol means that electrical and electronic equipment, at their end-of-life, should be disposed of  
separately from your household waste.  
Please, dispose of this equipment at your local community waste collection/recycling center.  
In the European Union there are separate collection systems for used electrical and electronic product.  
Please, help us to conserve the environment we live in!  
English-3  
Safety Precautions, Maintenance & Recommended Use  
FOR OPTIMUM PERFORMANCE, PLEASE NOTE  
THE FOLLOWING WHEN SETTING UP AND USING  
THE LCD COLOR MONITOR:  
The power cable connector is the primary means of  
detaching the system from the power supply. The monitor  
should be installed close to a power outlet, which is easily  
accessible.  
DO NOT OPEN THE MONITOR. There are no user  
serviceable parts inside and opening or removing covers  
may expose you to dangerous shock hazards or other  
risks.  
Handle with care when transporting. Save packaging for  
transporting.  
Please clean the holes of back cabinet to reject dirt and  
dust at least once a year because of set reliability.  
If using the cooling fan continuously, it’s recommended to  
wipe holes a minimum of once a month.  
Refer all servicing to qualified service personnel.  
Do not spill any liquids into the cabinet or use your monitor  
near water.  
When installing the remote control batteries;  
Align the batteries according to the (+) and (-) indications  
inside the case.  
Do not insert objects of any kind into the cabinet slots, as  
they may touch dangerous voltage points, which can be  
harmful or fatal or may cause electric shock, fire or  
equipment failure.  
-
-
Align the (-) indication of the battery first inside the case.  
Do not place any heavy objects on the power cord.  
Damage to the cord may cause shock or fire.  
Do not place this product on a sloping or unstable cart,  
stand or table, as the monitor may fall, causing serious  
damage to the monitor.  
CAUTION  
Immediately unplug your monitor from the wall outlet and refer  
servicing to qualified service personnel under the following  
conditions:  
When operating the LCD monitor with an AC 100-120V  
power supply in North America, use a power supply cord  
provided with this monitor.  
When the power supply cord or plug is damaged.  
If liquid has been spilled, or objects have fallen into the  
monitor.  
When operating the LCD monitor with an AC 220-240V  
power supply in Europe, use a power supply cord provided  
with this monitor.  
If the monitor has been exposed to rain or water.  
If the monitor has been dropped or the cabinet damaged.  
If the monitor does not operate normally by following  
operating instructions.  
In UK, use a BS-approved power cord with molded plug  
having a black (10A) fuse installed for use with this  
monitor.  
Recommended Use  
CAUTION  
If a power cord is not supplied with this monitor, please  
contact your supplier.  
For optimum performance, allow 20 minutes for warm-up.  
Rest your eyes periodically by focusing on an object at  
least 5 feet away. Blink often.  
When operating the LCD monitor with a 220-240V AC  
power supply in Australia, use the power cord provided  
with this monitor.  
Position the monitor at a 90° angle to windows and other  
light sources to minimize glare and reflections.  
Clean the LCD monitor surface with a lint-free, non-  
abrasive cloth. Avoid using any cleaning solution or glass  
cleaner!  
If a power cord is not supplied with this monitor, please  
contact your supplier.  
For all othercase, use a power cord that matches the AC  
voltage of the power outlet and has been approved by and  
complies with the safety standard of your particular  
country.  
Adjust the monitor’s brightness, contrast and sharpness  
controls to enhance readability.  
Avoid displaying fixed patterns on the monitor for long  
periods of time to avoid image persistence (after image  
effects).  
Do not place any objects onto the monitor and do not use  
the monitor outdoors.  
The inside of the fluorescent tube located within the LCD  
monitor contains mercury. Please follow the laws or rules of  
your municipality to dispose of the tube properly.  
Do not bend power cord.  
Get regular eye checkups.  
Ergonomics  
To realize the maximum ergonomic benefits, we recommend  
the following:  
Do not use monitor in high temperature, humid, dusty, or  
oily areas.  
Use the preset Size and Position controls with standard  
signals.  
If monitor or glass is broken, do not come in contact with  
the liquid crystal and handle with care.  
Use the preset Color Setting.  
Use non-interlaced signals.  
Allow adequate ventilation around the monitor, so that heat  
can properly dissipate. Do not block ventilated openings or  
place the monitor near a radiator or other heat sources.  
Do not put anything on top of the monitor.  
Do not use primary color blue on a dark background, as it  
is difficult to see and may produce eye fatigue due to  
insufficient contrast.  
English-4  
Contents  
Your new LDT321V/LDT371V monitor box* should contain the follow-  
ing:  
• LCD monitor  
• Main switch cover  
• Power Cord (3m)  
• Screw for Main Switch cover x 2  
• Cable Holder  
• Video Signal Cable (4m)  
• User’s Manual  
• Wireless Remote Control and AAA Batteries  
• Clamper x 2  
• Screw for Clamper x 2  
User’s Manual  
Video Signal Cable  
(D-SUB to D-SUB Cable)  
Screw for Main switch cover Screw for Clamper  
(M3 x 10) x 2  
(M4 x 8) x 2  
Clamper x 2  
Main switch cover  
Cable Holder  
* The supplied power cord varies depending on destination.  
For EU  
For UK  
Power cord  
For North  
America  
Wireless Remote Control  
and AAA Batteries  
* For all other case, use a power cord that matches the AC  
voltage of the power outlet and has been approved by and  
complies with the safety standard of your particular country.  
*Remember to save your original box and packing material to transport or ship the monitor.  
The following components are prepared as option.  
External Speakers  
English-5  
Parts Name and Functions  
Control Panel  
9
10  
11  
OFF  
ON  
Button Location  
EXIT  
INPUT  
MUTE  
5
8
7
6
4
3
2
1
POWER button (  
)
EXIT button  
Switches the power on/off. See also page 18.  
Activates the OSD menu when the OSD menu is turned-off.  
Acts as EXIT button to move to previous menu with OSD  
menu.  
MUTE button  
Switches the audio mute ON/OFF.  
Remote control sensor and Power indicator  
Receives the signal from the remote control (when using the  
wireless remote control). See also page 9.  
INPUT button  
Acts as SET button with OSD menu.  
(Toggle switches between [RGB1], [RGB2], [RGB3], [DVD/HD],  
[VIDEO<S>] and [VIDEO] .)  
Glows green when the LCD monitor is in active and glows red  
when the LCD is in POWER OFF mode. When the LCD is in  
power save mode, it will glow both green and red. When  
SCHEDULE is enabled, it willl blink green and glow red. See  
page 19. In the case of where a failure is detected, it will blink  
red.  
PLUS (+) button  
Acts as (+) button to increase the adjustment with OSD menu.  
Increase the audio output level when the OSD menu is turned  
off.  
Main Power Switch (LDT371V)  
Main Power Switch (LDT321V)  
On/Off Switch to turn main power on/off.  
MINUS (-) button  
Acts as (-) button to decrease the adjustment with OSD menu.  
Decreases the audio output level when the OSD menu is  
turned off.  
NOTE: Control Key Lock Mode  
This control completely locks out access to all Control Key  
functions. To activate the control key lock function, press both  
of “ “ and “ “ and hold down simultaneously for more than 3  
seconds. To resume back to user mode, press both of “ “ and  
UP ( ) button  
Activates the OSD menu when the OSD menu is turned-off.  
Acts as  
button to move the highlighted area up to select the  
adjustment with OSD menu.  
“ and hold simultaneously for three (3) seconds.  
DOWN ( ) button  
Activates the OSD menu when the OSD menu is turned-off.  
Acts as  
button to move the highlighted area down to select  
the adjustment with OSD menu.  
English-6  
Terminal Panel  
Pb/Cb Pr/Cr  
DVD/HD  
Y
R
G
B
H
V
AC IN  
Speaker  
OUT  
AUDIO  
3
OUT  
IN  
OUT  
2
S-VIDEO  
IN  
RGB3  
IN  
1
VIDEO  
RGB2  
RGB OUT  
RS-232C  
R
L
RGB1  
AC IN connector  
AUDIO IN 1, 2, 3  
Connects with the supplied power cord.  
To input audio signal from external equipment such as a  
computer, VCR or DVD player.  
RGB 1 IN (DVI-D)  
AUDIO OUT  
To input digital RGB signals from a computer.  
* This connector does not support analog input.  
To output the audio signal from the AUDIO IN 1,2 and 3 jack.  
RGB 2 IN (mini D-Sub 15 pin)  
VIDEO IN/OUT  
To input a analog RGB signals from a computer or other RGB  
equipment.  
VIDEO IN connector (BNC and RCA): To input a composite  
video signal. BNC and RCA are not available at the same  
time.  
RGB 3 IN [R, G, B, H,V] (BNC)  
To input the analog RGB signals from a computer or other  
RGB equipment.  
(Use only one input).  
VIDEO OUT connector (BNC): To output the composite  
video signal from VIDEO IN connector.  
S-VIDEO IN connector (MINI DIN 4 pin): To input the S-  
video (Y/C separate signal).  
RGB OUT (mini D-Sub 15 pin)  
To output the signal from RGB 2 IN or 3 IN.  
EXTERNAL CONTROL (mini D-Sub 9 pin)  
Use when operating the LCD monitor from RGB equipment  
like a computer. See page 29.  
DVD/HD IN [Y, Pb/Cb, Pr/Cr] (BNC)  
Connecting equipment such as a DVD player, HDTV device, or  
Laser disc player.  
EXTERNAL SPEAKER TERMINAL  
To output the audio signal for external speakers from AUDIO  
1, 2 or 3 jack.  
English-7  
Wireless Remote Control  
MUTE button  
To switch the mute function on/off.  
VOLUME UP button  
Increase the audio output level.  
VOLUME DOWN button  
Decrease the audio output level.  
PIP (Picture In Picture) button  
ON/OFF button: PIP-ON/OFF.  
See page 23.  
INPUT button: Select the ‘picture in picture’ input signal.  
CHANGE button: Replaces to the main picture and sub  
picture.  
Note: The "PIP" and "POP" modes do not function when  
the screen size is "CUSTOM" or "REAL"  
STILL button  
ON/OFF button: To switch the still picture mode on/off.  
CAPTURE button: Updates the still picture.  
DISPLAY button  
To switch the information OSD on/off. See page 19.  
AUTO SETUP button  
To enter the auto setup menu. See page 23.  
MENU button  
To switch the menu mode on/off.  
UP button  
Acts as  
button to move the highlighted area up to select  
the adjustment with OSD menu.  
Small screen which adjusted “PIP” mode moves up.  
DOWN button  
POWER button  
Switches the power on/off.  
Acts as  
button to move the highlighted area down to  
select the adjustment with OSD menu.  
* If Power Indicator is not glowing, then no controls will work.  
Small screen which adjusted “PIP” mode moves down.  
INPUT button  
Selects from input signal, [RGB1], [RGB2], [RGB3], [DVD/  
MINUS button decrease  
Acts as (-) button to decrease the adjustment with OSD  
menu.  
HD], [VIDEO<S>] and [VIDEO].  
AUDIO INPUT button  
Selects from input audio signal, [AUDIO1], [AUDIO2],  
[AUDIO3]  
Small screen which adjusted “PIP” mode moves left.  
PLUS button increase  
Acts as (+) button to increase the adjustment with OSD  
menu.  
SIZE button  
Small screen which adjusted “PIP” mode moves right.  
Selects picture size, [FULL], [NORMAL], [CUSTOM] , [DY-  
NAMIC] and [REAL]. See page 19.  
SET button  
Acts as SET button with OSD menu.  
PICTURE MODE button  
EXIT button  
Turn to previous menu with OSD menu.  
Selects from picture mode, [HIGHBRIGHT], [STANDARD],  
[sRGB], [CINEMA]. See page 19.  
HIGHBRIGHT: for moving image such as DVD  
STANDARD: for images (Factory setting)  
sRGB: for text based images  
CINEMA: for movies.  
English-8  
Operating Range for the Remote Control  
Handling the remote control  
Point the top of the remote control toward the LCD monitor's  
remote sensor during button operation.  
* Do not subject to strong shock.  
* Do not allow water or other liquid to splash the remote  
control. If the remote control gets wet, wipe it dry immedi-  
ately.  
Use the remote control within a distance of about 7 m/23 ft. from  
the front of the LCD monitor's remote control sensor and at a  
horizontal and vertical angle of within 30° within a distance of  
about 3 m/10 ft.  
* Avoid exposure to heat and steam.  
* Other than to install the batteries, do not open the remote.  
30o  
30o  
Caution  
Important, the remote control system may not function when  
direct sunlight or strong illumination strikes the remote control  
sensor of the LCD monitor, or when there is an object in the  
path.  
English-9  
Setup Procedure  
1. Determine the installation location  
CAUTION: DO NOT ATTEMPT TO INSTALL THE LCD MONI-  
3. Connect external equipment (See page  
13-17)  
TOR BY YOURSELF.  
To protect the connected equipment, turn off the main power  
Installing your LCD display must be done by a qualified  
technician. Contact your dealer for more information.  
CAUTION: MOVING OR INSTALLING THE LCD MONITOR  
MUST BE DONE BY TWO OR MORE PEOPLE.  
Failure to follow this caution may result in injury if the LCD  
monitor falls.  
before making connections.  
Refer to your equipment user manual.  
4. Connect the supplied power cord  
The power outlet socket should be installated as near to the  
equipment as possible, and should be easily accessible.  
Fully insert the prongs into the power outlet socket. Loose  
connection may cause noise.  
CAUTION: Do not mount or operate the display upside down,  
face up, or face down.  
CAUTION: Portrait use is not guaranteed for this product.  
CAUTION: Do not install the LCD monitor where it will be  
exposed to direct sunlight, as this will result in  
display defects.  
NOTE: Please refer to “Safety Precautions, Maintenance &  
Recommended Use” section of this manual for proper  
selection of AC power cord.  
CAUTION: This LCD has a temperature sensor and cooling  
fan. If the LCD becomes too hot, the cooling fan  
will turn on automatically. If the LCD becomes  
overheated and the cooling fan is running, the  
“Caution” menu will appear. If the “Caution” menu  
appears, discontinue use and allow the unit to cool.  
When the LCD monitor is used in an enclosure or  
with protection on LCD surface, please check the  
inside temperature of monitor by “HEAT STATUS”  
(See page 27). The temperature is too hot than  
normal condition, please set “cooling fan” to ON on  
SCREEN SAVER function (See page 24).  
Cable Holder  
IMPORTANT: Lay the protective sheet, which was wrapped around  
the LCD monitor when it was packaged, beneath the  
LCD monitor so as not to scratch the panel.  
2. Install the remote control batteries  
The remote control is powered by 1.5V AAA batteries. To install  
or replace batteries:  
1. Press and slide to open the cover.  
2. Align the batteries according to the (+) and (–) indications  
inside the case.  
5. Switch on the power of all the attached  
external equipment  
When connected with a computer, switch on the power of the  
computer first.  
3. Replace the cover.  
6. Operate the attached external equipment  
Display the signal on the external equipment you wish.  
7. Adjust the sound  
Make adjustments when adjustment of the volume is required.  
CAUTION  
Incorrect use of batteries can result in leaks or bursting.  
Be careful especially about the following points.  
8. Adjust the screen (See pages 20-28)  
Make adjustments when adjustment of the screen display  
Place "AAA" batteries matching the + and - signs on each  
battery to the + and - signs of the battery compartment.  
Do not mix battery types.  
position or distortion is required.  
Do not combine new batteries with used ones. It causes  
shorter battery life or leakage of batteries.  
9. Adjust the image (See page 20-28)  
Make adjustments when adjustment such as the brightness or  
Remove dead batteries immediately to prevent battery liquid  
from leaking into the battery compartment. Don't touch ex-  
posed battery acid, it cause damage to your skin.  
contrast is required.  
10. Recommended Adjustment  
NOTE: If you do not intend to use the Remote Control for a long  
period, remove the batteries.  
English-10  
To reduce the risk of “image persistence”, please adjust the  
following items based on the application being used.  
“POWER SAVE” (See page 23), “SCREEN SAVER” (See  
page 24), “SIDE BORDER COLOR”(See page 24), “DATE  
& TIME” (See page 27), “SCHEDULE”(See page 27).  
12.To prevent the main power switch  
from being changed  
To prevent the ability to use the main power switch, please  
attach the main switch, which is enclosed as an accessory.  
NOTE: With the main power switch cover in place, the main  
power switch can not be turned off. Remove main  
11. Installing and removing stand  
power switch cover in order to switch off the display.  
How to install stand  
1. Please turn monitor off.  
2. After inserting stand in guide block, fasten M6 x 16  
screws on both sides of the monitor.  
How to remove the stand  
1. Spread the protective sheet on the flat surface, such as  
a desk.  
2. Place monitor on the protective sheet.  
3. Remove screws with a screwdriver and place them in a  
safe place for reuse.  
Screw  
screws  
Main switch cover  
Main switch cover installation example (LDT371V)  
stands  
English-11  
How to Mount and Attach Options to the LCD Monitor  
You can attach mounting accessories to the LCD monitor in  
3. Ventilation Requirements for enclosure  
one of the following two ways:  
mounting  
1. In the upright position  
To allow heat to disperse, leave space between surround-  
ing objects as shown in the diagram below.  
2. Lay the screen face down  
4.To avoid falling down  
Fasten the LCD monitor to wall using a cord or chain,  
which is sufficient to support the weight of the LCD monitor  
(LDT321V: approx. 17.5kg / LDT371V: approx. 22kg).  
Protective Sheet  
See diagram below.  
Screw Holes  
Table  
Tabletop Stand  
Cord or Chain  
Clamper  
Lay the protective sheet on a table, which was wrapped around  
the monitor when it was packaged, beneath the screen surface  
so as not to scratch the screen face.  
Screw  
LDT321V: 360mm  
LDT371V: 462mm  
This device cannot be used or installed without the Tabletop Stand  
or other mounting accessory. Failure to follow correct mounting  
procedures could result in damage to the equipment or injury to  
the user or installer. Product warranty does not cover damage  
caused by improper installation.  
Before moving the LCD monitor, the cord or chain should  
be removed.  
Failure to follow these recommendations could result in voiding  
your warranty.  
When using with other mounting accessory, it must be a VESA-  
compatible mounting method and the screws must be M6 of size  
and 10mm or longer of length under consideration of the thick-  
ness of the mounting method. (Recommended torque: 470 -  
635N•cm). MITSUBISHI ELECTRIC recommends using mount-  
ing interface that comply with TÜV-GS and/or UL1678 standard  
in North America.  
English-12  
Connections  
Before making connections:  
*
First turn off the power of all the attached equipment and make connections.  
*
Refer to the user manual included with each separate piece of equipment.  
Wiring Diagram  
Wiring Diagram  
English-13  
Connecting a Personal Computer  
Connecting your computer to your LCD monitor will enable you to display your computer's screen image.  
Some video cards may not display an image correctly.  
Connect the LCD Monitor to a Personal Computer  
• To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the supplied PC - Video RGB signal cable  
(mini D-sub 15 pin to mini D-sub 15 pin).  
• To connect the RGB 3 IN connector (BNC) on the LCD monitor, use a signal cable which is available separately (mini D-  
sub 15 pin to BNC x 5). Select RGB 3 from the INPUT button.  
• When connecting one or more LCD monitors, use the RGB OUT connector (mini D-sub 15 pin).  
• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.  
• The AUDIO OUT jack outputs sound from the selected Audio input.  
PC or IBM compatible  
To analog RGB output  
Mini D-sub 15 pin  
To audio output  
BNC x 5  
Mini D-sub 15 pin  
LCD monitor (second monitor)  
English-14  
Connecting with Digital Interface Equipment  
Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital Visual Interface)  
standard.  
Connect the LCD Monitor to a Computer with a Digital Output  
The RGB 1 IN connector also accepts a DVI-D cable.  
Input TMDS signals conforming to DVI standards.  
To maintain display quality, use a cable with a quality prescribed by DVI standards. (See 27 page “DVI-MODE” )  
The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.  
The signal input from DVI-D connector cannot be output to the RGB OUT connector.  
Monitor  
To audio output  
English-15  
Connecting a DVD Player with component out  
Connecting your DVD player to your LCD monitor will enable you to display DVD video.  
Refer to your DVD player owner’s manual for more information.  
Connect the LCD Monitor to a DVD Player  
To connect the DVD/HD In connector (BNC) on the LCD monitor, use a separately available BNC connector cable. You will need  
a BNC-to-RCA adapter to connect a DVD player with an RCA pin jack to the BNC connector cable (not provided).  
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO 2] or [AUDIO 3] from the AUDIO  
INPUT button.  
Monitor  
To DVD Component video output  
DVD Player  
English-16  
Connecting to a Stereo Amplifier  
You can connect your stereo amplifier to your LCD monitor. Refer to your amplifier owner's manual for more information.  
Connect the LCD Monitor to a Stereo Amplifier  
Turn on the LCD monitor and the amplifier only after all connections have been made.  
Use an RCA cable to connect the AUDIO OUT connector (RCA) on the LCD monitor and the audio input on the amplifier.  
Do not reverse the audio left and right jacks.  
The AUDIO IN 2 and 3 (both RCA) can be used for audio input. For connection, select [AUDIO2] or [AUDIO3] from the AUDIO  
INPUT button.  
The AUDIO OUT jack outputs sound from the selected Audio input.  
Monitor  
VCR or CD player  
RCA  
BNC  
RCA  
LCD monitor (second monitor)  
External speaker  
External speaker  
English-17  
Basic Operation  
Power ON and OFF Modes  
The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the  
following three options:  
LDT321V  
1. Pressing the Main Power Switch.  
NOTE: When the Main Power Switch is used to power off  
the LCD monitor, the remote control and the power  
button will not activate the on mode and both  
green and red power indicator turn off. Be sure to  
turn the Main Power Switch to the on mode before  
using these two options.  
Main Power Switch  
LDT371V  
Main Power Switch  
2. Pressing the power button.  
NOTE: Before pressing the power button, be sure to turn  
on the Main Power button on the LCD monitor.  
Power Button  
3. Using the remote control  
NOTE: Before operating the remote control, be sure to  
turn on the Main Power Switch on the LCD monitor.  
English-18  
Power Indicator  
Power Indicator  
NORMAL: Display by the inputed signal aspect ratio by PC  
signal, or display in 4:3 aspect ratio at DVD/HD or VIDEO signal.  
FULL: Display in entire screen.  
Status  
Power ON  
Green  
DYNAMIC: Expand 4:3 pictures to the entire screen with  
non-linearity. (Some round image will be cut by expansion.)  
CUSTOM (ZOOM)  
Image can be expanded beyond the active display area. The  
image which is outside of active diaplay area is not displayed.  
REAL: Image will be displayed 1 by 1 pixel.  
Power OFF  
Red  
Power Standby when  
“SCHEDULE” is enable  
Power Standby  
Red On  
Green Blinking  
Red, Green  
Diagnosis (Detecting failure) Red Blinking  
* See troubleshooting on page 32  
ZOOM  
Using Power Management  
The LCD monitor follows the VESA approved DPM Power  
Management function.  
The power management function is an energy saving  
function that automatically reduces the power consumption  
of the display when the keyboard or the mouse has not been  
used for a fixed period.  
ZOOM  
Picture Mode  
RGB 1, 2, 3  
HIGHBRIGHT  
STANDARD  
STANDARD  
sRGB  
DVD/HD, VIDEO HIGHBRIGHT  
CINEMA  
The power management feature on your new display has  
been set to the “ON” mode. This allows your display to enter  
a Power Saving Mode when no signal is applied. This could  
potentially increase the life and decrease the power  
consumption of the display.  
Information OSD  
RGB1, 2, 3  
Selecting a video source  
RGB2  
Video Input mode  
1024 x 768  
48kHz 60Hz  
AUDIO : 1  
SIZE : FULL  
Input signal Information  
)
Audio input mode  
Picture Size mode  
To view a video source:  
Use the input button to set [VIDEO].  
Use the COLOR SYSTEM menu to set [AUTO], [NTSC],  
[PAL], [SECAM], [PAL60], [4.43NTSC], according to your  
video format.  
DVD/HD  
Picture Size  
DVD/HD  
AUDIO : 3  
SIZE : FULL  
Video Input mode  
Audio input mode  
Picture Size mode  
NORMAL  
CUSTOM REAL  
RGB 1, 2, 3  
FULL  
DVD/HD, VIDEO FULL  
NORMAL DYNAMIC  
CUSTOM  
REAL  
Signal Type  
NORMAL SIZE  
Recommended Size  
VIDEO<S>, VIDEO  
NORMAL  
DYNAMIC  
FULL  
VIDEO<S>  
NTSC  
AUDIO : 3  
SIZE : NORMAL  
Video Input mode  
Input Signal Colour System mode  
Audio input mode  
Picture Size mode  
4:3  
PIP or POP  
Main:RGB2  
Sub:VIDEO<S>  
Squeeze  
RGB2  
1024 x 768  
48kHz 60Hz  
AUDIO : 1  
VIDEO<S>  
NTSC  
Main picture Information  
Sub picture Information  
Main picture Information  
)
SIZE : FULL  
English-19  
OSD (On-Screen-Display) Controls  
Press MENU button to  
open Main menu. Press  
UP or DOWN button to  
select sub-menu.  
Press SET button  
to decide.  
Press UP or DOWN, and PLUS or  
MINUS button to select function, or  
control which you like.  
Press MENU or  
EXIT button to exit.  
Press SET button to decide.  
Remote Control  
Control Panel  
OSD screen  
SET  
Press UP or DOWN, and  
PLUS or MINUS button to  
select function, or control  
which you like. Press INPUT  
button to decide  
Press EXIT button to  
open Main menu.  
Press UP or DOWN  
button to select.  
Press INPUT button to  
decide  
Press EXIT button to  
exit.  
EXIT  
INPUT  
UP or DOWN button  
INPUT button  
“-” “+” button  
EXIT button  
Main-Menu  
PICTURE  
Sub-Menu  
Adjusts the overall image and background  
screen brightness.  
BRIGHTNESS  
CONTRAST  
Press + button to increase brightness.  
Press - button to decrease brightness.  
Adjusts the image brightness in relation to the  
input signal.  
Press + button to increase contrast.  
Press - button to decrease contrast.  
NOTE: sRGB picture mode is standard and  
cannot be changed.  
This function is digitally capable to keep crisp  
image at any timings. It is adjustable to get a  
distinct image or a soft one as you prefer and  
set independently for each picture mode.  
Press + button to increase sharpness.  
SHARPNESS  
Press - button to decrease sharpness.  
Adjusts the image brightness in relation to the  
background.  
Press + button to increase black level.  
Press - button to decrease black level.  
NOTE: sRGB picture mode is standard and  
cannot be changed.  
BLACK LEVEL  
Adjusts the noise reduction level.  
NOISE REDUCTION  
*:INPUT VIDEO<S>,  
VIDEO only  
Press + button to increase reduction level.  
Press - button to decrease reduction level.  
English-20  
Adjust the tint of the screen.  
Press + button the flesh tone color becomes  
greenish.  
Press - button the flesh tone color becomes  
purplish.  
TINT  
*:INPUT DVD/HD, VIDEO<S>,  
VIDEO only  
Adjust the color of the screen.  
Press + button to increase color depth.  
Press - button to decrease color depth.  
COLOR  
*:INPUT DVD/HD, VIDEO<S>,  
VIDEO only  
Color temperature can be selected out of  
5000K, 6500K and 9300K.  
When USER is selected, R.G.B can be  
adjusted individually.(RGB 1,2,3 only)  
COLOR TEMPERATURE  
R, G, B: Increases or decreases Red,Green,  
and Blue depending upon which is selected.  
The change in color will appear on screen and  
the direction (increase or decrease) will be  
shown by the color bars.  
NOTE: It can be adjusted only when USER  
is selected by COLOR TEMPERATURE.  
COLOR CONTROL  
*:INPUT RGB1,2,3 only  
Selecting Picture reset allows you to reset all  
OSD settings about PICTURE setting.  
Select "Yes" and press "SET" button to restore  
to factory preset data.  
Press "EXIT" button to cancel and then return  
to the previous menu.  
PICTURE RESET  
Main-Menu  
SCREEN  
Sub-Menu  
Controls Horizontal Image position within the  
display area of the LCD.  
H POSITION  
V POSITION  
Press + button to move screen to right.  
Press - button to move screen to left.  
Controls Vertical Image position within the  
display area of the LCD.  
Press + button to move screen to UP.  
Press - button to move screen to DOWN.  
Press + button to expand the width of the  
image on the screen the right.  
Press - button to narrow the width of the image  
on the screen the left.  
CLOCK  
*:INPUT RGB2/3 only  
Improves focus, clarity and image stability by  
increasing or decreasing this setting.  
CLOCK PHASE  
*:INPUT RGB2/3 only  
English-21  
You can select “FULL”, “NORMAL” and  
“CUSTOM” and "REAL". (INPUT RGB1/2/3  
only) You can also select “FULL”, “NORMAL”  
“DYNAMIC” and “CUSTOM” and "REAL".  
(INPUT DVD/HD, VIDEO<S>, VIDEO only)  
Selecting “DYNAMIC” will make the screen  
display panoramic with the expansion of the  
middle and outside of the screen changed. (The  
upper and the bottom of the image will be cut by  
expansion.)  
ZOOM MODE  
Dynamic image is the same as FULL size  
image when HDTV signal is input.  
Selecting "REAL" image will be displayed 1 by 1  
pixel.  
“CUSTOM ZOOM” will be selected when you  
select “CUSTOM” on the screen “ZOOM”  
mode.  
ZOOM: expands the horizontal and the vertical  
size simultaneously.  
CUSTOM ZOOM  
HZOOM: expands the horizontal size only.  
VZOOM: expands the vertical size only.  
H POSITION: moves to the right with + button.  
moves to the left with – button.  
V POSITION: moves up with + button.  
moves down with – button.  
Adjusts the horizontal size by increasing or  
decreasing the setting.  
Press + button to expand the width of the  
image on the screen.  
Press - button to narrow the width of the image  
on the screen.  
H RESOLUTION  
*:INPUT RGB1/2/3 only  
Adjusts the vertical size by increasing or  
decreasing the setting.  
Press + button to expand the height of the  
image on the screen.  
Press - button to narrow the height of the image  
on the screen.  
V RESOLUTION  
*:INPUT RGB1/2/3 only  
Selecting Screen reset allows you to reset all  
OSD settings from PICTURE setting.  
Select "Yes" and press "SET" button to restore  
the factory preset data.  
Press "EXIT" button to cancel and then return to  
the previous menu.  
SCREEN RESET  
Main-Menu  
AUDIO  
Sub-Menu  
Adjust the balance of L/R volume.  
Press + button to move the stereo sound image  
to right.  
Sound of the left side will be small.  
Press - button to move the stereo sound image  
to left.  
BALANCE  
To accentuate or reduce the high frequency  
sound.  
Press + button to increase TREBLE sound.  
Press - button to decrease TREBLE sound.  
TREBLE  
BASS  
To accentuate or reduce the low frequency  
sound.  
Press + button to increase BASS sound.  
Press - button to decrease BASS sound.  
Selecting Audio reset allows you to reset all OSD  
settings from AUDIO setting.  
Select "YES" and press "SET" button to restore  
the factory preset.  
Press "EXIT" button to cancel and then return to  
the previous menu.  
AUDIO RESET  
English-22  
Main-Menu  
PIP(PICTURE IN PICTURE)  
Note: The "PIP" and "POP" modes do not function when the screen size is "CUSTOM" or "REAL".  
Sub-Menu  
Selecting the size of picture inserted at the  
"Picture-in-Picture" (PIP) mode.  
"Large", "Middle" and "Small" are available.  
PIP SIZE  
Selecting the sound source in PIP mode.  
When selecting "MAIN AUDIO", you will get the  
sound for the main picture and when selecting  
"PIP AUDIO", you will get the sound for the  
picture instead.  
PIP AUDIO  
PIP RESET  
Selecting PIP Reset allows you to reset all  
OSD settings from PIP setting.  
Select "Yes" and press "SET" button to restore  
the factory preset data.  
Press "EXIT" button to cancel and then return  
to the previous menu.  
Main-Menu  
CONFIGURATION 1  
Sub-Menu  
Press "SET" button to automatically adjust  
screen size, horizontal position, vertical  
position, clock, clock phase, white level and  
black level.  
Press "EXIT" button to cancel execution AUTO  
SETUP and then will return to the previous  
menu.  
AUTO SETUP  
*:INPUT RGB2/3 only  
Selecting the auto adjust ON/OFF.  
Selecting ON when changing the timing, the  
horizontal position, vertical position and clock-  
phase will adjust automatically.  
AUTO ADJUST  
*:INPUT RGB2/3 only  
Selecting RGB "ON", the monitor will go to  
power management mode when RGB1,2,3  
sync is lost. Selecting VIDEO "ON", the  
monitor will go to power management mode  
after about 10 minutes delay from when  
DVD/HD and VIDEO input signal is lost.  
POWER SAVE  
LANGUAGE  
OSD control menus are available in seven  
languages.  
English-23  
Select "SCREEN SAVER" functions to reduce  
the risk of the "image persistence".  
GAMMA: The display gamma is changed and  
fixed when selected "ON".  
COOLING FAN: The built in cooling fan is  
always on when set "ON".  
BRIGHTNESS: The brightness is decreased  
when selected "ON".  
MOTION: Image is slightly expanded and  
moves 4 directions (UP, DOWN, RIGHT,  
LEFT) periodically (Need setting the time for  
movement).  
SCREEN SAVER  
Movement area is approximately +/- 10mm  
from original position; Please locate the  
important information such as text within 90%  
area of screen image.  
See note (1) for this functions.  
PIP and STILL will be disabled when  
"MOTION" is active.  
Selecting the Color System depends on your  
input video format.  
AUTO: NTSC, PAL, SECAM, PAL60 or 4.43  
NTSC is automatically selected.  
COLOR SYSTEM  
NTSC: Specific selection of NTSC.  
PAL: Specific selection of PAL.  
*:INPUT VIDEO<S>,  
VIDEO only  
SECAM: Specific selection of SECAM.  
PAL-60: Specific selection of PAL60.  
4.43NTSC: Specific selection of 4.43 NTSC.  
Selecting the side black bar color white when  
4:3 image displayed, you can select OFF, 50  
and 100.  
SIDE BORDER  
COLOR  
Selecting the CONFIGURATION RESET allows  
you to reset all configuration settings.  
Select "Yes" and press "SET" button to restore  
the factory preset data.  
Press "EXIT" button to cancel and return the  
previous menu.  
CONFIGURATION  
RESET  
Selecting "YES" allows you to reset PICTURE,  
SCREEN, AUDIO, CONFIGURATION1,2 and  
ADVANCED OPTION will be back to factory  
settings (except LANGUAGE, DATE & TIME  
and SCHEDULE). Select "YES" and press  
"SET" button to restore the factory preset  
data. Press "EXIT" button to cancel and  
return the previous menu.  
FACTORY RESET  
English-24  
Main-Menu  
CONFIGURATION 2  
Sub-Menu  
The OSD control menu will stay on as long as  
it is use. In the OSD Turn Off submenu, you  
can select how long the monitor waits after the  
last touch of a button to shut off the OSD  
control menu. The preset choices are 5 -120  
seconds.  
OSD TURN OFF  
INFORMATION OSD  
OFF TIMER  
Selects the information OSD display or not. The  
information OSD will display when input signal  
or source change or warning message like as  
no-signal or out-of range.  
A time between 1 to 10 seconds is available.  
To select OFF TIMER mode ON/OFF.  
In the OFF TIMER menu, you can preset the  
monitor to automatically power down.  
A time between 1 to 24 hours is available.  
When the OFF TIMER is set, the SCHEDULE  
(see page 28) settings will be disabled.  
Adjusts the horizontal position of the OSD  
menu.  
OSD H POSITION  
OSD V POSITION  
Adjusts the vertical position of the OSD menu.  
Indicates the model and serial number of your  
monitor.  
MONITOR INFORMATION  
English-25  
Main-Menu  
ADVANCED OPTION  
Sub-Menu  
Selects to decision of input signal about below  
timings, 1024x768, 1280x768 and 1360x768.  
AUTO: Determines the resolution automatically.  
1024x768: Determines the resolution as 1024x768  
1280x768: Determines the resolution as 1280x768  
1360x768: Determines the resolution as 1360x768  
INPUT RESOLUTION  
*:INPUT RGB2/3 only  
Selects a level of black expansion.  
In case of go under the black cut-off level,  
please adjust the "Black level" in moderation  
on OSD menu.  
BLACK LEVEL  
EXPANSION  
*:INPUT VIDEO<S>,  
VIDEO only  
Selects a display gamma.  
2.2  
2.4  
S gamma  
Native  
GAMMA SELECTION  
NOTE: sRGB picture mode is standard and  
cannot be changed.  
Changes the display area of the image.  
OVERSCAN: Set to display area about 95%  
UNDERSCAN: Set to display area about  
100%  
SCAN MODE  
*:INPUT DVD/HD  
VIDEO<S>, VIDEO only  
Selects IP (Interlace to Progressive) converter  
function. PROGRESSIVE: Enable the IP  
function, to convert interlace signal to  
progressive. Normally use this setting.  
INTERLACE*: Disable the IP function.  
*NOTE: This mode is better suited for motion  
pictures, but it is in danger of image retention.  
SCAN CONVERSION  
*:INPUT DVD/HD  
VIDEO<S>, VIDEO only  
Selects Film mode function.  
AUTO: Enable the Film mode function. This  
mode is better suited for movies, which is  
converted 24 Frames/sec source to DVD Video.  
We recommend to select "PROGRESSIVE" in  
"SCAN CONVERSION".  
OFF: Disable the Film mode function. This mode  
is better suited for Broadcasting or VCR source.  
FILM MODE  
*:INPUT DVD/HD  
VIDEO<S>, VIDEO only  
Selects the infrared wireless remote controller  
mode.  
The item in this menu will become effective by  
pressing "SET" button on the selected item.  
NORMAL: The monitor will be controlled  
normally by wireless remote controller.  
LOCK: Disable the monitor control by infrared  
wireless remote controller.  
IR CONTROL  
Keep pressing "DISPLAY" button during 5 sec  
or more, this setting will return to "NORMAL".  
TILING demonstrates multiple screens. This  
feature provides a single large screen using up  
to 16 monitors. It will be able to divide up to 4  
each H and V. This requires you to feed the  
PC output into each of the monitors through a  
distributor.  
H MONITORS: Select number of horizontal divide.  
V MONITORS: Select number of vertical divide.  
POSITION: Select a position to expand the screen.  
FRAME COMP: Works in tandem with TILING  
to compensate for the width of the tile bezels in  
order to accurately display the image.  
TILING  
ENABLE: Select "YES", the monitor will  
expand the selected position. PIP and STILL  
will be disabled when "TILING" is activated.  
English-26  
Information of status for COOLING FAN,  
BRIGHTNESS and TEMPERATURE.  
COOLING FAN comes to run when inside  
temperature is over a guaranteed limit.  
In this case warning is displayed on the screen.  
HEAT STATUS  
Adjusts the delay time from "standby" to  
"power on" mode.  
"POWER ON DELAY" time is selectable from  
OFF, 2sec, 4sec, 6sec, 8sec, 10sec, 20sec,  
30sec, 40sec and 50sec.  
POWER ON DELAY  
DATE AND TIME  
Adjusts the current date and time for internal  
clock.  
You should set this function when you use  
"SCHEDULE".  
Programs the monitor's working schedule.  
Schedule the power on and power off with  
hour and a day of the week. Also sets the  
input port.  
This OSD can't remove except EXIT.  
(see "NOTE 2" on page 28 for further  
information)  
SCHEDULE  
Selects the kind of DVI-D equipment which is  
connected RGB1.  
Select "DVI-PC" when PC or other computer  
equipment is connected.  
Select "DVI-HD" when DVD player, which has  
DVI-D output, is connected.  
DVI-MODE  
*:INPUT RGB1 only  
Selecting ADVANCED OPTION reset allows  
you to reset all OSD settings from ADVANCED  
OPTION settings, except for DATE & TIME.  
Select "YES" and press "SET" button to restore  
the factory preset data.  
Press "EXIT" button to cancel and then return  
the previous menu.  
ADVANCED  
OPTION RESET  
English  
NOTE 1: IMAGE PERSISTENCE  
Please be aware that LCD Technology may experience a phenomena known as Image Persistence. Image Persistence occurs  
when residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’ image  
persistence is not permanent, but constant images being displayed for a long period of time should be avoided.  
To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image  
was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.  
As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving  
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.  
Please set “POWER SAVE”, “SCREEN SAVER”, “DATE &TIME” and “SCHEDULE” functions to further reduce the risk of Image  
persistence.  
For long life use of Public Display  
< Image Sticking of LCD Panel >  
When LCD panel is operated continuously for long hours, a trace of electric charge remains near the electrode inside LCD, and  
residual or "ghost" image of previous image may be observed. (Image Persistence)  
Image Persistence is not permanent, but when fixed image is displayed for long period, ionic impurities inside LCD are accumulated  
along the displayed image, and it is observed permanently. (Image Sticking)  
English-27  
< Recommendations >  
For preventing the fast transition to Image Sticking, and for longer life usage of LCD, following are recommended.  
1. Fixed image should not be displayed for long period, and changed to another images with short cycle.  
2. When no use, please turn off the monitor by remote control, or use Power Management Function of monitor or use Schedule  
Function of monitor.  
3. Reducing the environmental temperature is effective for long life use.  
When Protection board (glass, acryl) is installed over the LCD surface, enclosed into the box / wall, or stack the monitor, please  
utilize the temperature sensors inside monitor.  
To reduce the environmental temperature, the monitor should be set Low Brightness or Cooling Fan "ON" by using Screen sever  
Function.  
4. Please use "Screen Saver Mode" of monitor.  
NOTE 2: HOW TO SETUP SCHEDULE  
Using the “SCHEDULE” function allows you to set up to seven different scheduled time intervals when the LCD Monitor will be  
activated.  
You can select the time the monitor turns on and turns off, the day of week the monitor is activated, and which input source the  
monitor will use for each scheduled activation period. A check mark in the box next to the number of the schedule indicates that  
the selected schedule is in effect.  
To select which schedule to set, use the up/down arrows to move the number (1 to 7) of the schedule.  
Use the (+) and (-) buttons to move the cursor horizontally within the particular schedule. Use the ( ) and ( ) buttons to increase  
time and select input port. The “SET” button is used to make a selection.  
If you create a schedule but do not want to use a power on time, select “--” in the “ON” time slot.  
If you do not want to use a power off time select “--” in the OFF time slot.  
If there is no input selected (“--” showing in the input spot) the input from the previous schedule will be used.  
The selection of EVERY DAY within a schedule takes priority over other schedules that are set up to operate weekly.  
When schedules are overlapping, scheduled Power ON time has priority over scheduled Power OFF time.  
If there are two schedules programmed for the same time, then the highest numbered schedule has priority.  
When the “OFF TIMER” (see page 25) is set, the “SCHEDULE” function is disabled.  
NOTE 3: "PIP" and "POP"  
The following table shows the combination of signal inputs under which the "PIP" and "POP" modes function. These modes do  
not function, however, when the screen size is "CUSTOM" or "REAL".  
SUB  
RGB1  
RGB2  
RGB3  
DVD/HD VIDEO<S> VIDEO  
RGB1  
RGB2  
: Supported  
RGB3  
: Not supported  
DVD/HD  
VIDEO<S>  
VIDEO  
Press the "PIP ON/OFF" buttons on the remote control to change between "PIP" and "POP"  
mode as shown in the diagram below.  
PIP  
POP  
OFF  
B
A
A
A
B
"PIP", "POP" mode resolution (Reference)  
PIP SIZE  
: 320 dots X 240 dots  
: 480 dots X 320 dots  
: 640 dots X 480 dots  
: 320 dots X 240 dots  
SMALL  
MIDDLE  
LARGE  
POP SIZE  
English-28  
Controlling the LCD monitor via RS-232C Remote Control  
This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal.  
Functions that can be controlled by a personal computer are:  
Power ON or OFF  
Switching between input signals  
Connection  
LCD Monitor + PC  
PC  
RS-232C Cable  
NOTE: If your PC (IBM or IBM compatible) is equipped only with a 25-pin serial port connector, a 25-pin serial port  
adapter is required. Contact your dealer for details.  
1) Interface  
PROTOCOL  
BAUD RATE  
DATA LENGTH  
PARITY BIT  
RS-232C  
9600 [bps]  
8 [bits]  
NONE  
STOP BIT  
1 [bits]  
FLOW CONTROL  
NONE  
This LCD monitor uses RXD, TXD and GND lines for RS-232C control.  
For RS-232C cable, the reverse type cable should be used.  
2) Control command diagram  
The command is structured by the address code, function code, data code and end code. The length of the  
command is different for each function.  
Address code  
30h 30h  
'0' '0'  
Function code  
Function  
Data code  
Data  
End code  
0Dh  
HEX  
ASCII  
Function  
Data  
[Address code] 30h 30h (In ASCII code, '0' '0') fixed.  
[Function code] A code of each fixed control move.  
[Data code]  
[End code]  
A code of each fixed control data (number) and not always indicated.  
0Dh (In ASCII code, ' ' ) fixed.  
English-29  
3) Control sequence  
(1) The command from a computer to the LCD monitor will be sent in 600ms.  
(2) The LCD monitor will send a return command 600ms* after it has received and encoded. If the command isn’t  
received correctly, the LCD monitor will not send the return command.  
(3) The personal computer checks the command and confirms if the command, which has been sent, has been executed or not.  
(4) This LCD monitor sends various codes other than return code. When having a control sequence by RS-232C, reject other  
codes from personal computers side.  
*: The sending time of return command may delay depending on the condition (during changing of the input signal, etc.).  
Example: Turn the power ON ( ’ ’ is for ASCII code)  
Sending commands  
from the PC  
Status code from  
LCD monitor  
Meaning  
30 30 21 0D  
Command for  
POWER ON  
’0’ ’0’ ’!’ ’  
30 30 21 0D  
Command received  
(Command echoed back)  
’0’ ’0’ ’!’ ’  
4) Operation commands  
The operation commands execute the basic operation setting of this LCD monitor.  
It may not operate when changing the signal:  
Operation  
ASCII  
!
HEX  
POWER ON  
POWER OFF  
INPUT RGB 1  
INPUT RGB 2  
INPUT RGB 3  
INPUT VIDEO  
INPUT DVD/HD  
21h  
"
22h  
_r1  
_r2  
_r3  
_v1  
_v2  
5Fh 72h 31h  
5Fh 72h 32h  
5Fh 72h 33h  
5Fh 76h 31h  
5Fh 76h 32h  
5Fh 76h 33h  
INPUT S-VIDEO* _v3  
POWER OFF command should be operated over 1 minute after the power is turned on.  
POWER ON command should be operated over 1 minute after the power is turned off.  
* S-VIDEO is SEPARATE only  
5) Read command  
Host computer sends the command without Data-code to monitor.  
After receiving this command, the monitor returns the command with Data-code of current status to host computer.  
< ex. > When Host computer ask Power status of monitor, the status of monitor is powered-on.  
Command from computer  
Command from Monitor  
Detail of command  
30 30 76 50 0D 0''0'v''P'[enter]  
Ask about the power status of monitor.  
30 30 76 50 31 0D '0''0''v''P''1'[enter] Monitor is powered-on.  
Structure of the Read-command  
ASCII  
HEX  
Data (Receive)  
Function  
Data (Receive)  
Function  
76 50  
76 50  
76 49  
76 49  
76 49  
76 49  
76 49  
76 49  
76 4D  
76 4D  
ON  
vP  
vP  
vI  
1
31  
POWER  
OFF(stand by)  
RGB-1(DVI-D)  
RGB-2(D-SUB)  
0
30  
r1  
r2  
r3  
v1  
v2  
v3  
p1  
p2  
72 31  
72 32  
72 33  
76 31  
76 32  
76 33  
70 31  
70 32  
vI  
Input  
RGB-3(BNC)  
Video  
vI  
vI  
DVD/HD  
vI  
S-VIDEO  
vI  
HIGHBRIGHT  
STANDARD  
vM  
vM  
Picture mode  
resolution  
Around  
tc1  
tc2  
(ex.) +25  
(ex.) +31  
74 63 31  
74 63 32  
2B 20 32 35  
2B 20 33 31  
Temperature  
of Internal  
monitor  
1˚C  
Main board  
Around  
resolution  
1˚C  
PCB  
Power  
English-30  
Features  
Reduced Footprint: Provides the ideal solution for environments requiring superior image quality but with size and  
weight limitations. The monitor’s small footprint and low weight allow it to be moved or transported easily from one location  
to another.  
Color Control Systems: Allows you to adjust the colors on your screen and customize the color accuracy of your monitor  
to a variety of standards.  
sRGB Color Control: A new optimized color management standard which allows for color matching on computer displays  
and other peripherals. The sRGB standard, which is based on a calibrated color space, allows for optimal color representa-  
tion and backward compatibility with other common color standards.  
OSD (On-Screen-Display) Controls: Allow you to quickly and easily adjust all elements of your screen image via simple  
to use on-screen menus.  
®
®
Plug and Play: The Microsoft solution with the Windows 95/98/Me/2000/XP operating system facilitates setup and  
installation by allowing the monitor to send its capabilities (such as screen size and resolutions supported) directly to your  
computer, automatically optimizing display performance.  
Intelligent Power Manager System: Provides innovative power-saving methods that allow the monitor to shift to a lower  
power consumption level when on but not in use, saving two-thirds of your monitor energy costs, reducing emissions and  
lowering the air conditioning costs of the workplace.  
Multiple Frequency Technology: Automatically adjusts monitor to the display card’s scanning frequency, thus displaying  
the resolution required.  
FullScan Capability: Allows you to use the entire screen area in most resolutions, significantly expanding image size.  
VESA Standard Mounting Interface: Allows users to connect their LCD monitor to any VESA standard third party  
mounting arm or bracket. Allows for the monitor to be mounted on a wall or an arm using any third party compliant device.  
MITSUBISHI ELECTRIC recommends using mounting interface that comply with TÜV-GS and/or UL1678 standard in  
North America.  
DVI-D: The digital-only subset of DVI ratified by the Digital Display Working Group (DDWG) for digital connections be-  
tween computers and displays. As a digital-only connector, analog support is not provided off a DVI-D connector. As a DVI-  
based digital only connection, only a simple adapter is necessary for compatibility between DVI-D and other DVI-based  
digital connectors such as DFP and P&D.  
TILING, Frame compensation: Demonstrates multiple screens with an accurate image and compensates for the bezel  
width.  
ZOOM: Expands the image individually for horizontal and vertical direction.  
Self-diagnosis: When an internal error should occur, a failure state will be indicated.  
English-31  
Troubleshooting  
No picture  
The signal cable should be completely connected to the display card/computer.  
The display card should be completely seated in its slot.  
Front Power Switch and computer power switch should be in the ON position.  
Check to make sure that a supported mode has been selected on the display card or system being used.  
(Please consult display card or system manual to change graphics mode.)  
Check the monitor and your display card with respect to compatibility and recommended settings.  
Check the signal cable connector for bent or pushed-in pins.  
Power Button does not respond  
• Unplug the power cord of the monitor from the AC outlet to turn off and reset the monitor.  
Image persistence  
Please be aware that LCD Technology may experience a phenomenon known as Image Persistence. Image Persistence  
occurs when a residual or “ghost” image of a previous image remains visible on the screen. Unlike CRT monitors, LCD monitors’  
image persistence is not permanent, but constant images being displayed for a long period of time should be avoided. To  
alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image was  
on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.  
NOTE: As with all personal display devices, MITSUBISHI ELECTRIC recommends displaying moving images and using a moving  
screen saver at regular intervals whenever the screen is idle or turning off the monitor when not in use.  
Image is unstable, unfocused or swimming is apparent  
Signal cable should be completely attached to the computer.  
Use the OSD Image Adjust controls to focus and adjust display by increasing or decreasing the fine adjustment.  
When the display mode is changed, the OSD Image Adjust settings may need to be re-adjusted.  
Check the monitor and your display card with respect to compatibility and recommended signal timings.  
If your text is garbled, change the video mode to non-interlace and use 60Hz refresh rate.  
Image of component signal is greenish  
Check to see if the DVD/HD input connector is selected.  
LED on monitor is not lit (no green or red color can be seen)  
Power Switch should be in the ON position and power cord should be connected.  
Make certain the computer is not in a power-saving mode (touch the keyboard or mouse).  
RED LED on monitor is blinking  
A certain failure might have occurred, please contact your nearest authorized MITSUBISHI ELECTRIC service facility.  
Display image is not sized properly  
Use the OSD Image Adjust controls to increase or decrease the coarse adjustment.  
Check to make sure that a supported mode has been selected on the display card or system being used.  
(Please consult display card or system manual to change graphics mode.)  
Selected resolution is not displayed properly  
Use OSD Display Mode to enter Information menu and confirm that the appropriate resolution has been selected.  
If not, select corresponding option.  
No Sound  
Check to see if speaker cable is properly connected.  
Check to see if mute is activated.  
Check to see if volume is set at minimum.  
Remote Control is not available  
Check the Remote Control’s batteries status.  
Check if batteries are inserted correctly.  
Check if the Remote Control is pointing at the monitor’s remote sensor.  
“SCHEDULE”/“OFF TIMER” function is not working properly  
The “SCHEDULE” function will be disabled when the “OFF TIMER” is set.  
If the “OFF TIMER” function is enable and the power to the LCD monitor is turned off if the power supply is interrupted unexpect-  
edly, then the “OFF TIMER” will be reset.  
Either light vertical or horizontal stripes may appear, depending on the specific display pattern. This is no product fault or degrada-  
tion.  
English-32  
Specifications  
Specifications (LDT321V) : BH548  
Product Specifications  
LCD Module  
Analog Input  
32"/80.0cm  
0.511mm  
1366 x 768 dots  
Over 16 million colors (depending on video card used)  
500cd/m2 (typ.)  
1200:1 (typ.)  
Digital Input  
Diagonal:  
Pixel Pitch:  
Resolution:  
Color:  
Brightness:  
Contrast Ratio:  
Response time:  
View Angle:  
12ms (typ.)  
Up 88°/Down 88°/Left 88°/Right 88°(typ.) @CR>10  
875mm/34.4inches  
31.5kHz - 91.1kHz  
50.0/58.0 - 85.0Hz  
13.5MHz -165.0MHz  
Design View Distance:  
Horizontal:  
Frequency  
31.5kHz - 91.1kHz  
50.0/58.0 - 85.0Hz  
25.0MHz - 165.0MHz  
Vertical:  
Pixel Clock  
Viewable Size  
Input Signal  
697.69 x 392.26mm/27.5 x 15.4inches  
Video:  
Sync:  
PC-Input:  
Analog RGB Video:0.7Vp-p  
Input impedance 75ohm  
Separate HV sync: TTL level (Pos./Neg.)  
Input Impedance:2.2K ohm  
BNC (R,G,B,H,V), 15Pin Mini D-sub  
Composite:1.0Vp-p  
TMDS  
Input-terminal:  
DVI-D (HDCP)  
VIDEO Input:  
Input impedance 75ohm BNC and RCA-PINJACK-INPUT  
Y/C Y:1Vp-p C:0.286Vp-p Input  
Impedance 75 ohm S-TERMINAL-INPUT  
Component:1.0/0.7Vp-p  
Input Impedance 75ohm BNC-INPUT  
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1  
9 Pin Mini D-sub  
AUDIO Input:  
RS-232C:  
In:  
Output Signal  
PC-Output:  
Video:  
Sync:  
Output-terminal:  
Analog RGB Video:0.7Vp-p with 75 ohm terminated  
Separate HV sync: TTL level (Pos./Neg.)  
15Pin Mini D-sub  
VIDEO Output:  
AUDIO Output:  
Speaker Output:  
BNC-OUTPUT x 1, Composite 1.0Vp-p with 75 ohm terminated  
RCA PIN-JACK L/R OUTPUT x 1, 0.15Vrms with 47k ohm terminated  
External Speaker Jack 7W + 7W (8 ohm)  
640 x 480 at 60Hz to 85Hz  
Resolutions Supported  
800 x 600 at 50Hz, 60Hz to 85Hz  
1024 x 768 at 50Hz, 60Hz to 85Hz  
1280 x 768 at 50Hz, 60Hz to 85Hz  
1360 x 768 at 50Hz, 60Hz* to 85Hz  
1280 x 1024 at 60Hz to 85Hz  
1600 x 1200 at 60Hz.....................Maximum Resolution  
* Recommended Resolution  
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i  
1.6 - 0.67A @100 - 240VAC, 50/60Hz  
Max 160W  
Less than 5W (Power button OFF/Main power switch ON)  
5 - 40°C/ 41 - 104°F  
20 - 80% (Without condensation)  
Power Supply  
Power Consumption  
Power Save:  
Temperature:  
Humidity:  
Temperature:  
Humidity:  
Operational  
Environment  
Storage  
Environment  
Dimension  
-20 - 60°C /- 4 - 140°F  
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C  
789mm(W) x 476.3mm(H) x 133mm(D)/31.1"(W) x 18.7"(H) x 5.24"(D)  
789mm(W) x 535.1mm(H) x 246mm(D)/31.1"(W) x 21.1"(H) x 9.69"(D)  
930mm(W) x 645mm(H) x 325mm(D)/36.7"(W) x 25.4"(H) x 12.8"(D)  
35.7lbs/16.2kg (Approximately)  
38.6lbs/17.5kg (Approximately)  
51.8lbs/23.5kg  
Net without stand:  
Net with stand:  
Gross:  
Net without stand:  
Net with stand:  
Gross:  
Weight  
VESA compatible arm  
mounting interface  
Complied Regulatory  
and Guidelines  
Power Management  
Plug & Play  
12 Holes (100mm pitches)  
Optional Multi-purpose Fix Mount  
UL60950-1/C-UL/TUV-GS/EN60950-1/BSMI/PSB/FCC-B/DOC-B/EN55022-B  
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/GOST  
VESA DPM  
VESA DDC2B, DDC/CI  
Accessories  
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,  
Clamper x 2, Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder,  
Main switch cover  
Note: Technical specifications are subject to change without notice.  
English-33  
Specifications (LDT371V) : BJ544  
Product Specifications  
LCD Module  
Analog Input  
37"/94.0cm  
0.600mm  
1366 x 768 dots  
Over 16 million colors (depending on video card used)  
500cd/m2 (typ.)  
1200:1 (typ.)  
Digital Input  
Diagonal:  
Pixel Pitch:  
Resolution:  
Color:  
Brightness:  
Contrast Ratio:  
Response time:  
View Angle:  
12ms (typ.)  
Up 88°/Down 88°/Left 88°/Right 88°(typ.) @CR>10  
1000mm/39.4inches  
31.5kHz - 91.1kHz  
50.0/58.0 - 85.0Hz  
13.5MHz -165.0MHz  
Design View Distance:  
Horizontal:  
Frequency  
31.5kHz - 91.1kHz  
50.0/58.0 - 85.0Hz  
25.0MHz - 165.0MHz  
Vertical:  
Pixel Clock  
Viewable Size  
Input Signal  
819.60 x 460.80mm/32.3 x 18.1inches  
Video:  
Sync:  
PC-Input:  
Analog RGB Video:0.7Vp-p  
Input impedance 75ohm  
Separate HV sync: TTL level (Pos./Neg.)  
Input Impedance:2.2K ohm  
BNC (R,G,B,H,V), 15Pin Mini D-sub  
Composite:1.0Vp-p  
TMDS  
Input-terminal:  
DVI-D (HDCP)  
VIDEO Input:  
Input impedance 75ohm BNC and RCA-PINJACK-INPUT  
Y/C Y:1Vp-p C:0.286Vp-p Input  
Impedance 75 ohm S-TERMINAL-INPUT  
Component:1.0/0.7Vp-p  
Input Impedance 75ohm BNC-INPUT  
RCA PIN-JACK L/R INPUT x 2, STEREO Mini Jack INPUT x 1  
9 Pin Mini D-sub  
AUDIO Input:  
RS-232C:  
In:  
Output Signal  
PC-Output:  
Video:  
Sync:  
Output-terminal:  
Analog RGB Video:0.7Vp-p with 75 ohm terminated  
Separate HV sync: TTL level (Pos./Neg.)  
15Pin Mini D-sub  
VIDEO Output:  
AUDIO Output:  
Speaker Output:  
BNC-OUTPUT x 1, Composite 1.0Vp-p with 75 ohm terminated  
RCA PIN-JACK L/R OUTPUT x 1, 0.15Vrms with 47k ohm terminated  
External Speaker Jack 7W + 7W (8 ohm)  
640 x 480 at 60Hz to 85Hz  
Resolutions Supported  
800 x 600 at 50Hz, 60Hz to 85Hz  
1024 x 768 at 50Hz, 60Hz to 85Hz  
1280 x 768 at 50Hz, 60Hz to 85Hz  
1360 x 768 at 50Hz, 60Hz* to 85Hz  
1280 x 1024 at 60Hz to 85Hz  
1600 x 1200 at 60Hz.....................Maximum Resolution  
* Recommended Resolution  
NTSC,PAL,SECAM,4.43NTSC,PAL60 Component:480i,480p,720p,1080i  
2.1 - 0.9A @100 - 240VAC, 50/60Hz  
Max 195W  
Less than 5W (Power button OFF/Main power switch ON)  
5 - 40°C/ 41 - 104°F  
20 - 80% (Without condensation)  
Power Supply  
Power Consumption  
Power Save:  
Temperature:  
Humidity:  
Temperature:  
Humidity:  
Operational  
Environment  
Storage  
Environment  
Dimension  
-20 - 60°C /- 4 - 140°F  
10 - 90% (Without condensation)/90%-3.5%x(Temp-40°C) regarding over 40°C  
909mm(W) x 545.8mm(H) x 133mm(D)/35.79"(W) x 21.49"(H) x 5.24"(D)  
909mm(W) x 604.9mm(H) x 246mm(D)/35.79"(W) x 23.81"(H) x 9.69"(D)  
1045mm(W) x 710mm(H) x 346mm(D)/41.14"(W) x 27.95"(H) x 13.62"(D)  
44.1lbs/20kg (Approximately)  
48.5lbs/22kg (Approximately)  
62.83lbs/28.5kg  
Net without stand:  
Net with stand:  
Gross:  
Net without stand:  
Net with stand:  
Gross:  
Weight  
VESA compatible arm  
mounting interface  
Complied Regulatory  
and Guidelines  
Power Management  
Plug & Play  
12 Holes (100mm pitches)  
Optional Multi-purpose Fix Mount  
UL60950-1/C-UL/TUV-GS/EN60950-1/BSMI/PSB/FCC-B/DOC-B/EN55022-B  
EN55024/EN61000-3-2/EN61000-3-3/C-Tick/CE/GOST  
VESA DPM  
VESA DDC2B, DDC/CI  
Accessories  
User's Manual, Power Cord, Video Signal Cable, Remote Controller, AAA Battery x 2,  
Clamper x 2, Screw for Main switch cover x 2, Screw for CLAMPER x 2, Cable Holder,  
Main switch cover  
Note: Technical specifications are subject to change without notice.  
English-34  
Pin Assignment  
1) Analog RGB input (MiniDsub15p): R G B 2  
Pin No  
Name  
1
2
Video Signal Red  
Video Signal Green  
Video Signal Blue  
GND  
3
Mini D-SUB 15P  
1
4
5
5
DDC-GND  
Red-GND  
6
10  
15  
6
11  
7
Green-GND  
Blue-GND  
+5V (DDC)  
SYNC-GND  
GND  
8
9
10  
11  
12  
13  
14  
15  
DDC-SDA  
H-SYNC  
V-SYNC  
DDC-SCL  
S-VIDEO input (MINI DIN 4P): V I D E O <S>  
2)  
MINI DIN 4P  
Pin No  
Name  
1
2
3
4
GND  
GND  
Y (Luminance)  
C (Chroma)  
3) Digital RGB input (DVI-D): R G B 1  
Pin - Assignment of DVI connector:  
8
1
2
3
4
5
6
7
8
TX2-  
9
TX1-  
17 TX0-  
18 TX0+  
1
DVI-D  
TX2+  
10 TX1+  
16  
Shield (TX2 / TX4) 11 Shield (TX1 / TX3) 19 Shield (TX0 / TX5)  
9
NC  
12 NC  
20 NC  
NC  
13 NC  
21 NC  
DDC-Serial Clock  
DDC-Serial Data  
NC  
14 +5V power  
15 Ground  
16 Hot plug detect  
22 Shield (TXC)  
23 TXC+  
24 TXC-  
24  
17  
4) RS-232C input  
Pin No  
Name  
Mini D-SUB 9P  
1
2
3
4
5
6
7
8
9
NC  
5
RXD  
TXD  
NC  
1
6
9
GND  
NC  
RTS  
CTS  
NC  
English-35  
MITSUBISHI Contact Information  
North America  
Europe  
MESCA (Mitsubishi Electric Sales Canada Inc.)  
Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2,  
Canada  
MEU-FRA (Mitsubishi Electric Europe B.V French Branch)  
25, Boulevard des Bouvets 92 741, Nanterre CEDEX, France  
Sales  
Phone  
Fax  
:+33 (0)1 55-68-55-07  
:+33 (0)1 55-68-57-31  
:+33 (0)1 55-68-56-42  
:+33 (0)1 55-68-57-31  
Sales  
Phone  
Fax  
:+1-(905) 475-7728  
:+1-(905) 475-7958  
Technical  
Phone  
Fax  
E-mail  
Phone  
Fax  
:+1-(905) 475-7728  
MEU-GER (Mitsubishi Electric Europe B.V. German Branch)  
Technical  
:+1-(905) 475-7958  
Gothaer Strasse 8, 40880 Ratingen, Germany  
Customer Care  
MEU-IR (Mitsubishi Electric Europe B.V. Irish Branch)  
Westgate Business Park, Ballymount, Dublin 24, Ireland  
E-mail  
MDEA (Mitsubishi Digital Electronics America, Inc.)  
(Warranty Registration)  
Sales  
Phone  
Fax  
Phone  
Fax  
:+353-(0)1- 4198844  
:+353-(0)1-4564422  
:+353-(0)1-4198807  
:+353-(0)1-4198895  
Presentation Products Division, 9351 Jeronimo Road, Irvine, CA 92618 U.S.A  
Technical  
Phone  
Main Line  
Technical  
Product Information  
:+1-(949) 465-6000  
:+1-(888) 307-0309  
:+1-(888) 307-0312  
MEU-IT (Mitsubishi Electric Europe B.V. Italian Branch)  
Centro Direzionale Colleoni, Palazzo Persero-Ingresso 2, Via Paracelso 12, 20041  
Agrate Brianza, Italy  
Technical Support  
E-mail  
Sales  
Phone  
Fax  
E-mail  
:+39-(0)39-60531  
:+39-(0)39-6053214  
MEU-NL (MitsubishiElectric Europe B.V. Benelux Branch)  
Nijverheidsweg 23a, 3641 RP Mijdrecht, The Netherlands  
Sales  
Phone  
Fax  
:+31-297-282461  
:+31-297-283936  
:+31-297-282461  
:+31-297-283936  
E-mail  
Phone  
Fax  
Technical  
E-mail  
MEU (MITSUBISHI ELECTRIC EUROPE B.V.)  
Moscow Representative Office, 12/1 Goncharnaya St. 109240, Moscow, Russia  
Sales  
Phone  
Fax  
:+7 (095) 915 8602  
:+7 (095) 915 8603  
MEU-SP (Mitsubishi Electric Europe B.V. Spanish Branch)  
Ctra. de Rubi, 76-80, 08190 Sant Cugat del Valles, Barcelona, Spain  
Sales  
Phone  
Fax  
:+34-93.565.31.54  
:+34-93.589.43.88  
E-mail  
Phone  
Fax  
:+34-93.586.27.51  
Technical  
:+34-93.699.74.45  
E-mail  
MEU-SWE (Mitsubishi Electric Europe B.V Scandinavian Branch)  
Hammarbacken 14, Box 750, S-19127, Sollentuna, Sweden  
Sales  
Phone  
Fax  
Phone  
Fax  
:+46-(0)8-6251070  
:+46-(0)8-6251036  
:+46-(0)8-6251052  
:+46-(0)8-6251036  
Technical  
MEU-UK (Mitsubishi Electric Europe)  
Visual Information Systems Division, Travellers Lane, Hatfield, Hertfordshire, AL10 8XB  
Sales  
Phone  
Fax  
:+44 (1707) 278684  
:+44 (1707) 278541  
E-mail  
Phone  
Fax  
:+44 (870) 606 5008  
Technical  
:+44 (1506) 431927  
E-mail  
Russia (Mitsubishi Electric Europe B.V Moscow Representative Office)  
52, bldg.5, Kosmodamianskaya Nab, 113054, Moscow, Russian Federation  
Sales  
Phone  
Fax  
Phone  
Fax  
:+7 (095) 721 2070  
:+7 (095) 721 2071  
:+7 (095) 721 2070  
:+7 (095) 721 2071  
Technical  
Printed in China  
AW-P0076C  

HP Hewlett Packard ZR24w User Manual
KitchenAid KGCS166GBL3 User Manual
Lava Computer Enhanced Parallel Port Board User Manual
Panasonic DMR ES15EB User Manual
Panasonic PanaFlat LC40 User Manual
Philips 21GR2656 User Manual
Philips Computer Monitor 274E5QHSB User Manual
Philips DVP3266K User Manual
Philips DVP5980K User Manual
Philips Smart Plus Series TP2781C User Manual