LG Electronics 47WV30BR User Manual

OWNER’S MANUAL  
MONITOR SIGNAGE  
Please read this manual carefully before operating the your set and  
retain it for future reference.  
MONITOR SIGNAGE MODELS  
47WV30MS  
47WV30BR  
47WV30BS  
47WV30-BAAM  
47WV30-BAAL  
TABLE OF CONTENTS  
3
57  
57  
57  
58  
58  
58  
Connecting to the LAN  
- LAN connection  
Connecting to a USB  
Daisy Chain Monitors  
- RGB Cable  
- DVI Cable  
59 TROUBLESHOOTING  
62 SPECIFICATIONS  
64 RS-232 CONTROL  
NOTE  
The following three phenomena may occur due to the characteristics of the Super Narrow Bezel  
LCD. They are not related to the display's performance.  
y
1. The edges of the screen may become darker or shadows may appear.  
2. Light leakage may occur depending on the viewing angle.  
3. Some components such as the guide boss or clip may be visible on the edges of the screen.  
4
LICENSE  
LICENSE  
license.  
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or  
registered trademarks of HDMI Licensing LLC.  
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a  
subsidiary of Rovi Corporation. This is an official DivX Certified® device that  
plays DivX video. Visit divx.com for more information and software tools to  
convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be  
registered in order to play purchased DivX Video-on-Demand (VOD) movies.  
To obtain your registration code, locate the DivX VOD section in your device  
setup menu. Go to vod.divx.com for more information on how to complete your  
registration.  
DivX Certified® to play DivX® video up to HD 1080p, including premium content.  
DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation  
or its subsidiaries and are used under license.  
Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668;  
7,515,710; 7,519,274  
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D  
symbol are trademarks of Dolby Laboratories.  
ASSEMBLING AND PREPARING  
5
ASSEMBLING AND PREPARING  
Unpacking  
Check your product box for the following items. If there are any missing accessories, contact the local  
dealer where you purchased your product. The illustrations in this manual may differ from the actual product  
and accessories.  
Power Cord  
RGB Cable  
DVI Cable  
CD (Owner's Manual, SuperSign  
Program, SuperSign Manual) /  
Card  
POWER  
MONITOR  
ON  
OFF  
ENERGY INPUT  
SAVING  
PQRS  
1/a/A  
MENU  
.
,
!
ABC  
JKL  
TUV  
DEF  
GHI  
MNO  
WXYZ  
IR Receiver  
Guide bracket  
Ring Core  
CLEAR  
-
*
#
MARK  
ARC  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
S.MENU  
OK  
BACK  
TILE  
EXIT  
ID  
Cable holder  
(2ea)  
ON  
OFF  
M4 x 10L  
Screw (4ea)  
M6  
Screw (4ea)  
Remote control and Batteries  
CAUTION  
Power cable holder  
U-shaped fixture  
RS-232C Cable  
Do not use any pirated items to ensure the safety and product life span.  
Any damages or injuries by using pirated items are not covered by the warranty.  
y
y
NOTE  
The accessories supplied with your product may vary depending on the model.  
Product specifications or contents in this manual may be changed without prior notice due to upgrade  
of product functions.  
y
y
How to Use a Ring Core  
y
A ring core reduces electromagnetic waves emitted from the IR receiver.  
Loop the cable through the core once, before using it as illustrated.  
Ring Core  
6
ASSEMBLING AND PREPARING  
Parts  
< 47WV30MS/47WV30BR >  
RS-232C  
(CONTROL)  
DVI OUT  
DVI IN  
COMPONENT IN  
RGB OUT  
RGB IN  
AUDIO  
SPEAKER  
(8Ω)  
USB  
LAN  
(RGB/DVI)  
/DVI  
REMOTE  
VIDEO AV IN  
AUIDO  
CONTROL IN  
Connection panel  
< 47WV30BS/47WV30-BAAM/47WV30-BAAL >  
RS-232C  
(CONTROL)  
DVI OUT  
DVI IN  
RGB OUT  
RGB IN  
AUDIO  
SPEAKER  
(8Ω)  
USB  
LAN  
AUDIO  
(RGB/DVI)  
/DVI  
REMOTE  
COMPONENT IN  
CONTROL IN  
Connection panel  
ASSEMBLING AND PREPARING  
7
To install in a Portrait Layout  
When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen).  
Remove L-brackets before Installation  
Remove the L-brackets from each corner of the monitor before installing it.  
NOTE  
Keep the removed L-brackets and use them when moving the monitor later.  
8
ASSEMBLING AND PREPARING  
Moving Handles  
Moving the device in a vertical  
position  
Moving the device in a horizontal  
position  
Hold the vertical handles on the left and right  
sides or the left and right handles on the back of  
the display.  
Have the screen facing down and hold the vertical  
handles on the left and right sides.  
Left and right handles  
at the back  
Vertical handle  
on the side  
Vertical handle  
on the side  
CAUTION  
Be careful not to directly touch the panel or expose it to shock when moving the monitor.  
Hold the monitor with the handles as the corners of the front panel are sharp, which may cause an  
injury.  
y
y
ASSEMBLING AND PREPARING  
9
STORAGE METHOD FOR PANEL PROTECTION  
Correct Method  
Incorrect Method  
Panel  
Panel  
If the product needs to be set upright, hold both  
sides of the product, and tilt backward carefully  
for. Do not let the panel not to touch the floor.  
If the product is tilted onto the bezel, the bottom of  
the panel may be damaged.  
Panel  
Cushion  
Panel  
When laying down the product, lay a cushion on a  
flat floor. Put the product on it with the panel of  
the product facing down.  
Panel  
If the product is tilted onto the edge of the panel,  
the panel may be damaged.  
If there is not a cushion available, ensure the floor is  
clean and then lay the product down carefully with the  
panel facing either upward or downward. At this time,  
be careful for objects not to fall on the panel.  
10 ASSEMBLING AND PREPARING  
Installing on a wall  
CAUTION  
Disconnect the power cord first, and then  
move or install the Monitor set. Otherwise  
electric shock may occur.  
If you install the Monitor set on a ceiling or  
slanted wall, it may fall and result in severe  
injury. Use an authorized LG wall mount  
and contact the local dealer or qualified  
personnel.  
y
y
Install the monitor at least 10 cm away from the  
wall and leave about 10 cm of space at each side  
of the monitor to ensure sufficient ventilation. De-  
tailed installation instructions can be obtained from  
your local retail store. Please refer to the manual  
to install and set up a tilting wall mounting bracket.  
Do not over tighten the screws as this may  
cause damage to the Monitor set and void  
your warranty.  
Use the screws and wall mounts that  
meet the VESA standard. Any damages  
or injuries by misuse or using an improper  
accessory are not covered by the warranty.  
y
y
10 cm  
20 cm  
10 cm  
10 cm  
10 cm  
NOTE  
Use the screws that are listed on the VESA  
standard screw specifications.  
The wall mount kit includes an installation  
manual and necessary parts.  
The wall mount bracket is optional. You can  
obtain additional accessories from your local  
dealer.  
The length of screws may differ depending  
on the wall mount. Be sure to use the proper  
length.  
y
If you want to mount the monitor on the wall (op-  
tional), attach the wall mounting bracket to the rear  
of the monitor.  
Make sure that the wall mounting bracket is se-  
curely fixed to the monitor and to the wall.  
Use the wall mount plate and screws that comply  
with the VESA standard.  
y
y
y
y
Use the wall mount plate and screws conforming  
to the VESA standard.  
For more information, refer to the  
instructions supplied with the wall mount.  
NOTE  
Do not install the product in a place with  
no ventilation (e.g., on a bookshelf or in a  
closet) or on a carpet or cushion. If there is  
no other option but to mount the product on  
the wall, make sure that sufficient ventilation  
is provided before installation.  
y
- Failure to do so may result in a fire due to  
the increase in the internal temperature.  
ASSEMBLING AND PREPARING 11  
EXTERNAL EQUIPMENT SETUP  
IR RECEIVER  
This allows a remote control sensor to be placed  
in a custom location. Then that display can control  
other displays via an RS-232 cable. Refer to page  
19 for more information.  
AUDIO  
(RGB/DVI)  
REMTE  
CONTL IN  
12 ASSEMBLING AND PREPARING  
Tiling Displays  
How to Join Sets - Installing Set 1  
*Example of 2 x 2 tiling  
* The numbers assigned in this example (#1, #2, #3, #4) are used to demonstrate the installation procedure  
to ensure it is easy to follow. These numbers have nothing to do with the Set ID that is used to operate the  
remote control. Set the guide bracket into the bracket groove using screws and mount the set to the wall  
mount plate or the wall.  
Guide bracket  
Screws for fixing the  
VESA wall mount  
Guide bracket  
Screws for fixing  
the guide bracket  
Wall mount plate  
<Rear view of the set with the wall mount plate>  
* The wall mount plate is shaded in gray in the illustration to help you see it.  
ASSEMBLING AND PREPARING 13  
How to Join Sets - Installing Set 2  
Join Set 2 to Set 1 using the guide brackets on the top side of Set 1 and mount the two sets to the wall  
mount plate or the wall.  
Remove the guide brackets after mounting the sets.  
<The sets joined with the guide brackets>  
<The sets after removing the guide brackets>  
Remove the  
guide brackets  
Guide bracket  
<Rear view of the set with the wall mount plate>  
How to remove the guide brackets  
* Unscrew the guide bracket screws from the rear of the set and remove the guide brackets.  
* Once the screws are removed, the guide brackets will drop. You need to remove them through the gap  
on the sides of the set.  
* This can be done only when there is enough space between the set and the wall mount plate or the wall  
to unscrew the screws. (Please check whether there is enough space to remove the screws before fixing  
the guide brackets.)  
<Removing the guide bracket through  
the side gap>  
14 ASSEMBLING AND PREPARING  
How to Join Sets - Installing Set 3  
Fix the guide brackets to Set 3 following the steps above, and loosely mount the set to the wall mount  
plate or the wall.  
#2  
#1  
#3  
<Joined Sets 1 and 2>  
<Set 3 to be joined>  
Minimize the space between the sides of the sets using the U-shaped fixture.  
When the sets are joined with the minimum amount of space between them, firmly mount them to the wall  
mount plate or the wall.  
When the sets are firmly mounted to the wall, remove the U-shaped fixtures.  
U-shaped fixture  
U-shaped fixture  
ASSEMBLING AND PREPARING 15  
How to Join Sets - Installing Set 4  
Loosely mount Set 4 to the wall mount plate or the wall and minimize the space between the sets using  
the U-shaped fixtures.  
When Set 4 is firmly mounted to the wall, remove the U-shaped fixtures.  
Remove the guide brackets. See <How to Join Sets - Installing Set2,3>.  
Now the 2 x 2 tiling is complete.  
You can tile in various combinations, such as 3 x 3.  
Set 4 joined to the rest of the sets  
(2 x 2 tiling)  
Wall mount plate or wall  
Display set  
NOTE  
The guide brackets for tiling should only be used to join sets and should be removed once they are joined.  
The guide brackets should only be used as the assisting tool when tiling sets. The load applied to each set  
should be supported by the wall mount plate or the wall using a VESA wall mount (800 x 400).  
(Each set must be firmly mounted to the wall mount plate or the wall.)  
The guide brackets must be removed once the sets are joined. When joining the sets without removing the  
guide brackets, extra caution is required to prevent damage due to the set weight.  
The U-shaped fixtures must also be removed after mounting the set to the wall mount plate or the wall.  
You may mount the set without using the guide brackets or the U-shaped fixtures; this does not affect the  
performance of the device.  
y
y
y
y
y
y
16 ASSEMBLING AND PREPARING  
Inserting the Cable Holder  
As illustrated, insert two cable holders into the  
holes at the bottom rear of the set to organize the  
cable bundles.  
As illustrated, screw the power cable holder into  
the hole on the bottom rear of the set to hold the  
power cables together. (This is to put the power  
cables inside the holder.)  
REMOTE CONTROL 17  
REMOTE CONTROL  
The descriptions in this manual are based on the buttons of the remote control. Please  
read this manual carefully and use the Monitor set correctly.  
POWER  
MONITOR  
ENERGY INPUT  
SAVING  
ON  
OFF  
1
4
.
,
!
2
ABC  
JKL  
TUV  
3
6
9
DEF  
GHI  
5
8
0
MNO  
WXYZ  
7
PQRS  
To replace batteries, open the battery cover, replace  
batteries (1.5 V AAA) matching and ends to the  
label inside the compartment, and close the battery  
cover. To remove the batteries, perform the installation  
actions in reverse.  
1/a/A  
CLEAR  
-
*
#
MARK  
ARC  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
MENU  
S.MENU  
OK  
BACK  
TILE  
EXIT  
ID  
ON  
OFF  
CAUTION  
Do not mix old and new batteries, as this  
may damage the remote control.  
Make sure to point the remote control at the  
remote control sensor on the Monitor.  
y
y
Make sure to point the remote control to the remote control sensor on the Monitor set.  
Power On / Off  
Switches the set on from  
standby or off to standby.  
Energy Saving  
Adjust the Energy Saving  
mode of the SET.  
INPUT  
POWER  
Monitor On / Off  
Turn off the monitor and then  
turn it back on.  
If you press the button once, the  
following Input Signal Window  
will appear. Select the signal  
type you want using the button.  
MONITOR  
ENERGY INPUT  
SAVING  
OFF  
ON  
Number and Alphabet  
Type numbers.  
The alphabet selection is not  
applicable.  
. , ! ABC DEF  
GHI JKL MNO  
1/a/A  
This button selection is not  
applicable.  
Clear  
ꢆ ꢇTUV WXYZ  
PQRS  
This button selection is not  
applicable.  
1/a/A  
CLEAR  
- * #  
MARK  
PSM  
Selects the Picture Status  
Mode.  
ARC  
ARC  
Selects the Aspect Ratio Mode.  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
Volume Up/Down  
Adjusts the volume.  
BRIGHTNESS  
Moves to the previous or next  
screen.  
AUTO  
MENU  
MUTE  
Switches the sound on or off.  
18 REMOTE CONTROL  
POWER  
MONITOR  
ENERGY INPUT  
SAVING  
ON  
OFF  
1
4
.
,
!
2
ABC  
JKL  
TUV  
3
6
9
DEF  
GHI  
5
8
0
MNO  
WXYZ  
7
PQRS  
1/a/A  
CLEAR  
-
*
#
MARK  
ARC  
P
A
G
E
BRIGHT  
NESS  
PSM  
MUTE  
AUTO  
MENU  
S.MENU  
OK  
BACK  
TILE  
EXIT  
ID  
ON  
OFF  
Selects a menu.  
Clears all on-screen displays  
and returns to Set viewing  
from any menu.  
AUTO  
Automatically adjusts picture  
position and minimizes image  
instability.(RGB input only)  
Up/Down/Left/Right  
Allows you to navigate the  
on-screen menus and adjust  
the system settings to your  
preference.  
NESS  
E
UTE  
AUTO  
S.MENU  
MENU  
OK  
Accepts your selection or  
displays the current mode.  
S.MENU  
(SuperSign Menu Key)  
This button selection is not  
applicable.  
OK  
BACK  
Allows the user to move  
back one step in an interactive  
application.  
EXIT  
BACK  
EXIT  
TILE  
Clears all on-screen displays  
and returns to Monitor set  
viewing.  
ID  
ON  
OFF  
ID ON/OFF  
Allows you to set the Picture  
ID or turn it off. Use this  
button to control the individual  
monitors connected in RS-  
232C mode. (It works properly  
only when Set IDs are  
TILE  
Selects the TILE Mode.  
assigned.)  
USB Menu control  
Controls media playback.  
REMOTE CONTROL 19  
Displaying the device name connected to an input port  
Display which devices are connected to which  
external input ports.  
NOTE  
External inputs supported: AV, Component,  
RGB, HDMI, DVI-D. (AV only support 47WV-  
30BR and 47WV30MS)  
y
1 Access the Input list screen and press the blue  
(input label) button on the remote control.  
Labels available : VCR, DVD, Set top box,  
Satellite, Game, PC, Blue-ray, HD-DVD  
The input labels are displayed on the Input  
Label screen or at the top left of the screen  
when you change the external input setting.  
For DTV/PC-compatible signals, such as  
1080p 60 Hz, the screen settings may  
change according to the input label. The Just  
Scan option is available if a PC is connected  
as an external device. (1080p only support  
47WV30BR and 47WV30MS)  
y
y
BACK  
EXIT  
TILE  
OFF  
ID  
ON  
y
47WV30-BAAL/47WV30-BAAM/47WV30BS  
does not support AV input.  
y
2 You can assign an input label for every input  
except USB.  
Input Label  
AV  
Component  
RGB  
HDMI  
DVI-D  
Close  
20 REMOTE CONTROL  
Picture ID  
Picture ID is used to change the settings of a  
specific set (display) using a single IR receiver for  
multi-vision. The set receiving the IR signal com-  
municates with another set via the RS232 connec-  
tor. Each set is identified by a Set ID. If you as-  
sign the Picture ID using the remote control, only  
displays with the same Picture ID and Set ID can  
be controlled remotely.  
2 If you press the left/right buttons or press the  
ON button repeatedly, the Picture ID cycles  
through OFF and 1 to 4.Assign the ID you  
want.  
Picture ID  
Off  
AUDIO  
(RGB/DVI)  
Close  
RS-232C OUT  
RS-232C IN  
RS-232C OUT  
RS-232C IN  
RS-232C OUT  
RS-232C IN  
REMOTE  
CONTL IN  
If you assign the Set ID to each set with  
multi-vision, and then assign the Picture ID  
using the red button on the remote control,  
the key command is displayed for the set  
with the same Set ID and Picture ID. A set  
with different Set IDs and Picture IDs cannot  
be controlled by IR signals.  
y
IR Receiver  
Refer to the Set ID on page 46 for assigning  
a Set ID.  
The maximum value of the Picture ID can be  
set in the Total Set ID menu.  
Please refer to the Installation Manual for  
more information on the assignment of a  
Total Set ID.  
y
y
y
Picture ID  
Off  
Close  
NOTE  
2X2 Multi-Vision (Total Set ID: 4)  
Set IDs are assigned as shown in the picture.  
For example, if the Picture ID is assigned  
to 2, the upper right display (Set ID: 2) can  
be controlled by IR signals.  
y
1 Press the ID On (Red) button on the remote con-  
trol.  
For each set, you can change the settings  
for the PICTURE, AUDIO, TIME, OPTION,  
NETWORK and MY MEDIA menus or the  
hot keys on the remote control.  
If you press the ID OFF (Green) button,  
the Picture IDs for all sets are turned off. If  
you then press any button on the remote  
control, all sets will start working again.  
The Picture ID function may not work dur-  
ing MY MEDIA operating.  
y
y
y
BACK  
EXIT  
TILE  
OFF  
ID  
ON  
USING THE MONITOR SET 21  
USING THE MONITOR SET  
RGB connection  
Connecting to a PC  
Transmits an analog video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the D-sub 15 pin cable as shown the  
following illustrations. Select RGB input source on  
the monitor.  
NOTE  
It is recommended to you use an HDMI  
connection for the best image quality.  
y
Back of the Monitor Set  
RGB OUT  
CAUTION  
RGB IN  
Connect the signal  
input cable and tighten  
it by turning the screws  
clockwise.  
y
PC  
NOTE  
Apple computers may  
require an adapter  
to connect to this  
monitor. Call or visit  
their web site for more  
information.  
y
CAUTION  
Do not press the screen with your finger for  
this damage the screen.  
Avoid displaying a fixed image on the  
screen for a long period of time to prevent  
image burn. Use a screensaver if possible.  
y
y
 
22 USING THE MONITOR SET  
DVI connection  
HDMI connection  
Transmits the digital video signal from your PC to  
the Monitor set. Connect the PC and the Monitor  
set with the DVI cable as shown the following  
illustrations.  
Transmits the digital video and audio signals from  
your PC to the Monitor set. Connect the PC and  
the Monitor set with the HDMI cable as shown  
in the following illustrations. Select HDMI input  
source on the monitor.  
Select DVI-D input source on the monitor.  
Back of the Monitor Set  
DVI IN  
Back of the Monitor Set  
/DVI  
(not included)  
PC  
PC  
NOTE  
NOTE  
If you do not use an optional external  
speaker, connect the PC to the Monitor set  
with audio cable.  
Use a shielded signal interface cable, such  
as D-sub 15 pin signal cable and DVI to  
HDMI cable, with a ferrite core to maintain  
standard compliance for the product.  
If you want to use HDMI-PC mode, you must  
set the input label to PC mode.  
y
y
Use a High Speed HDMI™ Cable.  
Please check the PC environment if you  
cannot hear the sound in HDMI mode.  
If you want to use HDMI-PC mode, you must  
set the input label to PC mode.  
y
y
y
y
It may not be compatible if you use HDMI-PC  
mode.  
y
   
USING THE MONITOR SET 23  
Audio connection  
IR Receiver connection  
Transmits the audio signals from your PC to the  
Monitor set. Connect the PC and the Monitor set  
with the Audio cable as shown in the following  
illustrations. You should set PC as an input label  
to connect the PC to the Monitor set with an Audio  
connection.  
Allows the use of a wired remote or IR receiver  
extension.  
Back of the Monitor Set  
AUDIO  
(RGB/DVI)  
Back of the Monitor Set  
AUDIO  
(RGB/DVI)  
REMOTE  
CONTROL IN  
REMOTE  
CONTROL IN  
(not included)  
PC  
NOTE  
To ensure the best sound quality and  
minimize noise, keep the cable as short as  
possible.  
y
24 USING THE MONITOR SET  
Customizing image options  
Adjusting the screen  
Customize basic and advanced options of each  
image mode for the best screen performance.  
Selecting an image mode  
Display images using optimized settings by  
selecting one of the preset image modes.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
Press the Navigation buttons to scroll to  
Picture Mode and press OK.  
3
4
5
Press the Navigation buttons to scroll to  
Picture Mode and press OK.  
3
4
Press the Navigation buttons to scroll to an  
image mode you want and press OK.  
Press the Navigation buttons to scroll to an  
image mode you want and press OK.  
Select and adjust following options, and then  
press OK.  
Mode  
Vivid  
Description  
Adjusts the video image for the retail  
environment by enhancing the Contrast,  
Brightness, Color, and Sharpness.  
Option  
Description  
Backlight  
Adjusts the brightness of the screen  
by controlling the LCD backlight. If  
you decrease the brightness level,  
the screen becomes darker and the  
power consumption will be reduced  
without any video signal loss.  
Increases or decreases the gradient  
of the video signal. You may use  
Contrast when the bright part of the  
image is saturated.  
Standard  
Cinema  
Adjusts the image for the normal  
environment.  
Optimizes the video image for the  
cinematic look and enjoy movies as if you  
are in a movie theater.  
Contrast  
Brightness  
Sharpness  
Color  
Sports  
Game  
Optimizes the video image for high and  
dynamic actions by emphasizing primary  
Colors such as white, grass, or sky blue.  
Optimizes the video image for a fast  
gaming screen such as PCs or games.  
Adjusts the base level of the signal in  
the image. You may use Brightness  
when the dark part of the image is  
saturated.  
When you are finished, press EXIT.  
5
When you return to the previous menu, press  
BACK.  
Adjusts the level of crispness in the  
edges between the light and dark  
areas of the picture. The lower the  
level, the softer the image.  
Adjusts the balance between Red  
and Green levels.  
Tint  
Adjusts intensity of all Colors.  
Set to warm to enhance hotter Colors  
such as red, or set to cool to make  
picture bluish.  
Color  
Temperature  
USING THE MONITOR SET 25  
Advanced  
Control  
Customizes the advanced options.  
See more information about advanced  
Adjusting the sound  
Selecting an sound mode  
Picture  
Reset  
Restores the options to the default  
setting.  
Play the sound in its optimized settings by  
selecting one of the preset sound modes.  
Press MENU to access the main menus.  
1
2
When you are finished, press EXIT.  
6
When you return to the previous menu, press  
BACK.  
Press the Navigation buttons to scroll to  
AUDIO and press OK.  
Press the Navigation buttons to scroll to Sound  
Mode and press OK.  
3
4
Press the Navigation buttons to scroll to a  
sound mode you want and press OK.  
Customizing PC display options  
Customize options of each image mode for the  
best image quality.  
Mode  
Description  
This function works in the following mode:  
RGB[PC] mode.  
y
Standard  
Selects when you want standard-quality  
sound.  
Press MENU to access the main menus.  
Music  
Cinema  
Sports  
Game  
Selects when you listen to music.  
Selects when you watch movies.  
Selects when you watch sports events.  
Selects when you play games.  
1
Press the Navigation buttons to scroll to  
PICTURE and press OK.  
2
3
4
Press the Navigation buttons to scroll to  
Screen and press OK.  
When you are finished, press EXIT.  
5
Select and adjust following options, and then  
press OK.  
When you return to the previous menu, press  
BACK.  
Option  
Description  
Resolution Selects a proper Resolution.  
Auto  
Sets to adjust the screen Position, Size  
Configure and Phase automatically. The displayed  
image may be unstable for a few seconds  
while the configuration is in progress.  
Position/  
Adjusts the options when the image is  
Size/Phase not clear, especially when characters are  
shaky, after the auto configuration.  
Reset  
Restores the options to the default  
setting.  
When you are finished, press EXIT.  
5
When you return to the previous menu, press  
BACK.  
26 USING THE MONITOR SET  
Customizing sound options  
Using additional options  
Customize options of each sound mode for the  
best sound quality.  
Adjusting aspect ratio  
Resize the image to view the image at its optimal  
size by pressing ARC while you are watching  
Monitor set.  
Press MENU to access the main menus.  
1
2
Press the Navigation buttons to scroll to  
AUDIO and press OK.  
Press the Navigation buttons to scroll to Sound  
Mode and press OK.  
3
4
5
CAUTION  
Press the Navigation buttons to scroll to a  
sound mode you want and press OK.  
If a fixed image displays on the screen for a  
long period of time, it will be imprinted and  
become a permanent disfigurement on the  
screen. This is “image burn” or “burn-in” and  
not covered by the warranty.  
If the aspect ratio is set to 4:3 for a long  
period of time, image burn may occur on  
the letterboxed area of the screen.  
y
y
Select and adjust following options, and then  
press OK.  
Option  
Infinite  
Description  
LG's Infinity Sound option provides  
5.1 channel stereo sound from two  
speakers.  
Sound  
Treble  
Controls the dominant sounds in the  
output. When you turn up the treble, it  
will increase the output to the higher  
frequency range.  
NOTE  
You can also change the image size by  
accessing the main menus.  
Bass  
Controls the softer sounds in the  
output. When you turn up the bass, it  
will increase the output to the lower  
frequency range.  
MODE AV Component RGB  
PC  
DVI-D  
HDMI  
Reset  
Resets the sound mode to the default  
setting.  
ARC  
DTV PC DTV PC  
16:9  
o
x
x
o
o
o
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
o
o
x
o
o
o
o
x
o
o
x
x
Just Scan  
1:1  
When you are finished, press EXIT.  
6
When you return to the previous menu, press  
4:3  
BACK.  
Zoom  
Cinema  
Zoom  
 
USING THE MONITOR SET 27  
- 16:9 : This selection will allow you to adjust the  
picture horizontally, in linear proportion, to fill the  
entire screen(useful for viewing 4:3 formatted  
DVDs).  
- 4:3 : This selection will allow you to view a  
picture with an original 4:3 aspect ratio, black  
bars will appear on both the left and right of the  
screen.  
- Just Scan : This Selection will allow you view  
the picture of best quality without loss of original  
picture in high resolution image. Note: If there is  
noise in original Picture, You can see the noise  
at the edge.  
- Zoom : This selection will allow you to view the  
picture without any alteration, while filling the  
entire screen. However, the top and bottom of  
the picture will be cropped.  
Just Scan  
- 1:1 : The aspect ratio is not adjusted from the  
original. (Only HDMI PC, DVI-D PC, RGB PC)  
* Pictures with resolution higher than 1366X768  
are adjusted to the 1366x768 while maintaining  
the original aspect ratio.  
- Cinema Zoom : Choose Cinema Zoom when  
you want to enlarge the picture in correct  
proportion. Note: When enlarging or reducing  
the picture, the image may become distorted.  
28 ENTERTAINMENT  
ENTERTAINMENT  
To set up the network seetings: (Even if your dis-  
play has already connected automatically, running  
setup again will not harm anything),  
Connecting to a wired network  
(Depending on model)  
1 Press MENU to access the main menus.  
Connect the display to a local area network (LAN)  
via the LAN port as shown on the following illustra-  
tion and set up the network settings.  
2 Press the Navigation buttons to scroll to NET-  
WORK and press OK.  
Only supports wired network connection.  
After making a physical connection, a small  
number of netmworks may require the display net-  
work settings to be adjusted. For most netmworks,  
the display will connect to automatically without  
any adjustments.  
3 Press the Navigation buttons to select Net-  
work Setting and press OK.  
4 If you already set Network Setting, select  
Resetting. The new connection settings resets  
the current network settings.  
For detailed information, contact your internet  
provider or router manual.  
5 Select IP Auto Setting or IP Manual Setting.  
- If selecting IP Manual Setting, press the  
Navigation and Number buttons. IP address-  
es will need to be input manually.  
- IP Auto Setting: Select this if there is a  
DHCP server (Router) on the local area net-  
work (LAN) via wired connection, the display  
will automatically be allocated an IP address.  
If you’re using a broadband router or broad-  
band modem that has a DHCP (Dynamic  
Host Configuration Protocol) server function.  
The IP address will automatically be deter-  
mined.  
LAN  
Router  
LAN  
WAN  
Router  
6 When you are finished, press EXIT.  
Cable modem  
ETHERNET  
@
Cable modem  
Internet  
Internet  
CAUTION  
CAUTION  
y Do not connect a modular phone cable to  
the LAN port.  
y Since there are various connection meth-  
ods, please follow the specifications of  
your telecommunication carrier or internet  
service provider.  
y Network setting menu will not be availa-  
ble until the display connected to physical  
network.  
y Since there are various connection meth-  
ods, please follow the specifications of  
your telecommunication carrier or internet  
service provider.  
ENTERTAINMENT 29  
NOTE  
y A DSL modem is required to use DSL service  
and a cable modem is required to use cable  
modem service. Depending on the access  
method of and subscriber agreement with your  
ISP, you may not be able to use the internet  
connection feature contained in this display or  
you may be limited to the number of devices you  
can connect at the same time. (If your ISP limits  
sub-scription to one device, this display may  
not be allowed to connect when a PC is already  
connected.)  
y If you want to access the Internet directly  
on your display, the internet connection  
should always be on.  
y If you cannot access the Internet, check  
the network conditions from a PC on your  
network.  
y When you use Network Setting, check  
the LAN cable or check if DHCP in the  
router is turned on.  
y If you do not complete the network set-  
tings, the network may not work properly.  
y The use of a “Router” may not be allowed or its  
usage may be limited depending on the policies  
and restrictions of your ISP. For details, contact  
your ISP directly.  
Tips for Network setting  
y Use a standard LAN cable with this display. Cat5  
or better with a RJ45 connector.  
y Many network connection problems during set  
up can often be fixed by re-setting the router  
or modem. After connecting the display to the  
netmwork, quickly power off and/or disconnect  
the power cable of the netmwork router or cable  
modem. Then power on and/or connect the  
power cable again.  
Network Status  
y Depending on the internet service provider  
(ISP), the number of devices that can receive  
internet service may be limited by the applicable  
terms of service. For details, contact your ISP.  
y LG is not responsible for any malfunction of the  
display and/or the internet connection feature  
due to communication errors/malfunctions as-  
sociated with your internet connection, or other  
connected equipment.  
1 Press MENU to access the main menus.  
2 Press the Navigation buttons to scroll to NET-  
WORK and press OK.  
3 Press the Navigation buttons to select Net-  
work Status.  
4 Press OK to check the network status.  
y LG is not responsible for problems within your  
internet connection.  
5 When you are finished, press EXIT.  
y You may experience undesired results if the  
network connection speed does not meet the  
requirements of the content being accessed.  
y Some internet connection operations may not  
be possible due to certain restrictions set by the  
Internet service provider (ISP) supplying your  
Internet connection.  
Option  
Setting  
Description  
Return to the network setting menu.  
Test the current network status after set-  
Test  
ting the network.  
Close  
Return to the previous menu.  
y Any fees charged by an ISP including, without  
limitation, connection charges are your respon-  
sibility.  
y A 10 Base-T or 100 Base-TX LAN port is  
required when using a wired connection to this  
display. If your internet service does not allow for  
such a connection, you will not be able to con-  
nect the display.  
30 ENTERTAINMENT  
Tips for using USB storage devices  
Connecting USB storage de-  
vices  
y Only a USB storage device is recognizable.  
y If the USB storage device is connected  
through a USB hub, the device is not recog-  
nizable.  
Connect USB storage devices such as a USB  
flash memory, external hard drive to the display  
Connect a USB flash memory or USB memory  
card reader to the Display as shown on the follow-  
ing illustration. The My media screen appears.  
y A USB storage device using an automatic  
recognition program may not be recognized.  
y A USB storage device which uses its own  
driver may not be recognized.  
y The recognition speed of a USB storage  
device may depend on each device.  
y Please do not turn off the display or unplug  
the USB device when the connected USB  
storage device is working. When such device  
is suddenly separated or unplugged, the  
stored files or the USB storage device may  
be damaged.  
or  
y Please use only a USB storage device which  
was formatted as a FAT32 file system or  
NTFS file system provided with the Win-  
dows operating system. In case of a storage  
device formatted as a different utility program  
which is not supported by Windows, it may  
not be recognized.  
CAUTION  
y Do not turn the display off or remove a  
USB storage device while my media-  
Menu is activated, as this could result in  
loss of files or damage to the USB stor-  
age device.  
y Please connect power to a USB storage  
device(over 0.5 A) which requires an external  
power supply. If not, the device may not be  
recognized.  
y Back up your files saved on a USB stor-  
age device frequently, as you may lose  
or damage the files and this may be not  
covered by the warranty.  
y Please connect a USB storage device with  
the cable provided by the device maker.  
y Some USB storage devices may not be sup-  
ported or operated smoothly.  
y File alignment method of USB storage  
device is similar to Window XP and filename  
support of up to 100 English characters.  
y Be sure to back up important files since data  
stored in a USB memory device may be  
damaged. We will not be responsible for any  
data loss.  
 
ENTERTAINMENT 31  
y If the USB HDD does not have an external  
power source, the USB device may not be  
detected. So be sure to connect the external  
power source.  
Browsing files  
Access the photo, music, or movie lists and browse  
files.  
- Please use a power adaptor for an external  
power source. We do not guarantee an USB  
cable for an external power source.  
y If your USB memory device has multiple  
partitions, or if you use a USB multi-card  
reader, you can use up to 4 partitions or USB  
memory devices.  
Connect a USB storage device.  
1
2
3
Press MENU to access the main menus.  
Press the Navigation buttons to scroll to My  
Media and press OK.  
Press Navigation buttons to scroll to MUSIC  
LIST, PHOTO LIST or MOVIE LIST and press  
OK.  
4
y If a USB memory device is connected to a  
USB multi-card reader, its volume data may  
not be detected.  
y If the USB memory device does not work  
properly, disconnect and reconnect it.  
y How fast a USB memory device is detected  
differs from device to device.  
Movie List  
Photo List  
Music List  
y If the USB is connected in Standby Mode,  
specific hard disk will automatically be  
loaded when the display is turned on.  
y The recommended capacity is 1 TB or less  
for a USB external hard disk and 32 GB or  
less for USB memory.  
1
2
Page 1/1  
Photo List  
Page 1/1  
009  
Drive1  
USB External  
4
5
001  
010  
002  
003  
012  
004  
013  
005  
014  
006  
015  
007  
008  
y Any device with more than the recommended  
capacity may not work properly.  
011  
y If a USB external hard disk with a “Energy  
Saving” function does not work, turn the  
hard disk off and on again to make it work  
properly.  
Move  
View  
PAGE  
Page Change  
Change Numbers  
Mark Mode  
Exit  
To Music List  
3
y USB storage devices below USB 2.0 are  
supported as well. But they may not work  
properly in the movie list.  
No.  
Description  
Moves to upper level folder  
Current page/Total pages  
1
y Maximum of 999 folders or files can be rec-  
ognized under one folder.  
2
3
Corresponding buttons on the  
remote control  
Current page/ total pages of  
contents under the folder  
4
1
focused on  
Contents under the folder  
5
1
focused on  
Buttom  
Description  
Repeatedly, press the GREEN button to  
Green converted to Photo List->Music List,  
button Music List->Movie List or Movie List-  
>Photo List.  
Yellow A method to view in 5 large thumbnail  
button or simple list.  
Blue  
Convert to Mark Mode.  
button  
 
32 ENTERTAINMENT  
Supported file format  
MP3  
Music  
Bit rate 32 to 320  
Type  
Supported file format  
y Sampling rate MPEG1 Layer3 : 32 kHz,  
44.1 kHz, 48 kHz  
y Sampling rate MPEG2 Layer3 : 16 kHz,  
22.05 kHz, 24 kHz  
y Sampling rate MPEG2.5 Layer3 : 8 kHz,  
11.025 kHz, 12 kHz  
Movie  
DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,  
TS,TRP,TP,ASF,WMV,FLV)  
Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.  
vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.  
wmv/*.flv/*.avi(motion-jpeg)/*.  
mp4(motion-jpeg)/*.mkv(motion-jpeg))sup-  
porting file  
Video format : DivX3.11, DivX4.12,  
DivX5.x, DivX6, Xvid1.00, Xvid1.01,  
Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2,  
Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1,  
JPEG, Sorenson H.263  
Audio format : Dolby Digital, AAC, Mpeg,  
MP3, LPCM, HE-AAC, ADPCM, WMA  
Bit rate : within 32 kbps to 320 kbps(MP3)  
Viewing movies  
External Subtitle format : *.smi/*.srt/*.sub  
(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.  
txt(TMPlayer)/*.psb(PowerDivX)  
This display will play media files from a USB drive  
or a DLNA server on your network.  
Internal Subtitle format : only, XSUB (It is  
the subtitle format used in DivX6 files)  
1 Press the Navigation buttons to scroll to My  
Photo  
JPEG  
Media and press OK.  
Baseline : 64 x 64 to 15360 x 8640  
Progressive : 64 x 64 to 1920 x 1440  
y You can play JPEG files only.  
y Non-supported files are displayed in the  
form of predefined icon.  
2 Press the Navigation buttons to scroll to Movie  
List and press OK.  
3 Press the Navigation buttons to scroll to a  
Only 3D Models  
File  
Item  
Profile  
folder you want and press OK.  
Extensions  
4 Press the Navigation buttons to scroll to a file  
2D jpeg  
supported  
file format  
SOF0:  
y
y
you want and press OK.  
jpg  
jpe  
baseline  
SOF1:  
Extend  
Sequential  
SOF2:  
y
Progressive  
photo size  
Min: 64 X 64  
Max-Normal  
Type: 15360  
(W) X 8640 (H)  
Progressive  
Type: 1920  
y
y
y
(W) X 1440 (H)  
3D mpo  
supported mpo  
file format  
photo size  
4:3 size:  
y
3,648 x 2,736  
2,592 x 1,944  
2,048 x 1,536  
3:2 size:  
y
3,648 x 2,432  
ENTERTAINMENT 33  
Page 1/1  
6 Control playback by using the following buttons.  
Movie List  
Page 1/1  
Drive1  
USB External  
001  
005  
002  
006  
003  
004  
◄►  
01:02:30 / 02:30:25  
Option  
Move  
View  
◄◄  
PAGE  
Page Change  
►►  
Hide  
Exit  
II  
Change Numbers  
Mark Mode  
Exit  
To Photo list  
Page 1/1  
Movie List  
Button  
Description  
Mark Mode  
Page 1/1  
Drive1  
USB External  
Stops the playback  
Plays a video  
001  
005  
002  
006  
003  
004  
051. Apple_ ......  
02:30:25  
Pauses or resumes the playback  
Scans backward in a file  
Scans forward in a file  
Move  
View  
Exit Mark Mode  
PAGE  
Page Change  
Exit  
Show the Option menu.  
Mark All  
Unmark All  
Play Marked  
Hide the menu on the full-sized screen.  
Return to Movie List.  
Skips to specific points in a file dur-  
ing playback. The time of a specific  
point will appear on the status bar. In  
some files, this function may not work  
properly.  
Menu  
Description  
Play the selected movie file.  
Once a movie file finishes playing,  
the next selected one will be played  
automatically.  
Play Marked  
or  
Press the  
ENERGY SAVING button  
Mark All  
Mark all movie files on the screen.  
Deselect all marked movie files.  
repeatedly to increase the brightness  
of your screen.  
ENERGY  
SAVING  
Unmark All  
Exit Mark Mode Exit the Mark Mode.  
5 Play a movie.  
NOTE  
y Non-supported files are displayed the preview  
image by icon only  
y Abnormal files are displayed in the form of  
bitmap  
.
.
34 ENTERTAINMENT  
Tips for using playing video files  
Video options  
y Some user-created subtitles may not work  
properly.  
1 Press MENU to access the Pop-Up menus.  
2 Press the Navigation buttons to scroll to Set  
Video Play., Set Video. or Set Audio. and  
press OK.  
y Some special characters are not supported  
in subtitles.  
y HTML tags are not supported in subtitles.  
y Subtitles in languages other than the sup-  
ported languages are not available.  
y The screen may suffer temporary interrup-  
tions (image stoppage, faster playback, etc.)  
when the audio language is changed.  
y A damaged movie file may not be played  
correctly, or some player functions may not  
be usable.  
NOTE  
y Option values changed in Movie List does  
not affect Photo List and Music List.  
y Option value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
y When replaying the video file after stopping,  
you can play from where it stopped previ-  
ously.  
y Movie files produced with some encoders  
may not be played correctly.  
y If the video and audio structure of recorded  
file is not interleaved, either video or audio is  
outputted.  
y Videos with resolution higher than  
1920X1080 at 25/30P may not play properly  
depending on the frame.  
y Movie files other than the specified types and  
formats may not work properly.  
y Max bitrate of playable movie file is 20 Mbps.  
(only, Motion JPEG : 10 Mbps)  
y We do not guarantee smooth playback of  
profiles encoded level 4.1 or higher in H.264/  
AVC.  
y DTS Audio codec is not supported.  
y A movie file more than 30 GB in file size is  
not supported for playback.  
y A DivX movie file and its subtitle file must be  
located in the same folder.  
y A video file name and its subtitle file name  
must be identical for it to be displayed.  
y Playing a video via a USB connection that  
doesn’t support high speed may not work  
properly.  
y Files encoded with GMC(Global Motion  
Compensation) may not be played.  
When you are watching the movie by Movie  
List function, you can adjust an image by  
Energy Saving key on the remote control.  
User setup for each image mode does not  
operate.  
y
MAINTENANCE 35  
When you select the Set Video Play,,  
Code Page  
Latin1  
Support Language  
English, Spanish, French,  
1 Press the Navigation buttons to scroll to show  
the Picture Size, Audio Language, Subtitle  
Language or Repeat.  
German, Italian, Swedish, Finnish,  
Dutch, Portuguese, Danish, Roma-  
nian, Norwegian, Albanian, Gaelic,  
Welsh, Irish, Catalan,Valencian  
Bosnian, Polish, Croatian, Czech,  
2 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
Latin2  
Slovak, Slovenian, Serbian,  
Hungarian  
Latin4  
Estonian, Latvian, Lithuanian  
Cyrillic  
Bulgarian, Macedonian, Russian,  
Ukrainian, Kazakh  
Menu  
Description  
Picture Size  
Selects your desired picture  
Greek  
Greek  
format during movie play.  
Audio  
Changes the Language Group of the  
Turkish  
Turkish  
Language  
audio during movie play. Files  
with a single audio track cannot be  
selected.  
Subtitle Lan-  
guage  
Turn on/off the subtitle.  
Language  
Code Page  
Sync  
Activated for SMI subtitle and  
can select the language within the  
subtitle.  
Can select the font for subtitle.  
When set to default, same font as  
general menu will be used.  
Adjusts the time synchronisation of  
the subtitle from -10 secs to +10 secs  
by steps of 0.5 secs during movie  
play.  
Position  
Changes the position of the  
subtitle either up or down during  
movie play.  
NOTE  
y Only 10,000 of sync blocks can be supported  
within the subtitle file.  
Size  
Selects your desired Subtitle size  
during movie play.  
y When playing a video, you can adjust the  
Picture Size by pressing the RATIO button.  
y Subtitles in your language are only sup-  
ported when the OSD menu is also in this  
language.  
Repeat  
Turn on/off repeat function of  
movie playback. When turned on, the  
file within the folder will be played  
back repeatedly. Even when the  
repeated playback  
y The code page options may be disabled de-  
pending on the language of the subtitle files.  
y Select the appropriate code page for the  
subtitle files.  
is turned off, it can run the playback if  
the file name is similar to the previous  
file.  
36 MAINTENANCE  
Page 1/1  
When you select the Set Video,,  
Photo List  
Page 1/1  
009  
Drive1  
USB External  
1 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
001  
010  
002  
003  
012  
004  
013  
005  
006  
015  
007  
008  
011  
014  
Move  
View  
PAGE  
Page Change  
When you select the Set Audio,,  
Change Numbers  
Mark Mode  
Exit  
To Music List  
1 Press the Navigation buttons to scroll to show  
Page 1/1  
Photo List  
the Sound Mode, Clear Voice II or Balance.  
Mark Mode  
Page 1/1  
009  
Drive1  
USB External  
2 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
001  
010  
002  
003  
004  
013  
005  
014  
006  
015  
007  
008  
011  
012  
Viewing photos  
Move  
Unmark All  
View  
PAGE  
Page Change  
Exit  
Mark All  
Exit Mark Mode  
View Marked  
View image files saved in a USB storage device.  
The displays on the screen may differ from the  
model.  
Menu  
Description  
1 Press the Navigation buttons to scroll to My  
View Marked  
Mark All  
Display the selected photo file.  
Mark all photo files on the screen.  
Deselect all marked photo files.  
Media and press OK.  
2 Press the Navigation buttons to scroll to Photo  
Unmark All  
List and press OK.  
Exit Mark Mode Exit the Mark Mode.  
3 Press the Navigation buttons to scroll to a  
folder you want and press OK.  
5 View photos.  
4 Press the Navigation buttons to scroll to a file  
you want and press OK.  
NOTE  
y Non-supported files are displayed the pre-  
view image by icon only  
y Abnormal files are displayed in the form of  
bitmap  
.
.
MAINTENANCE 37  
Using photo options  
Press the ENERGY SAVING button  
ENER-  
repeatedly to change the brightness of  
your screen.  
GY SAVING  
Use the following options while viewing photos.  
y Slide Speed: Selects a slideshow  
speed (Fast, Medium, Slow).  
y TransitionEffect: Set the view mode  
of the slideshow.  
Option  
y BGM: Selects a music folder for the  
background music.  
NOTE  
y You cannot change the music  
folder while the background  
music is playing.  
y You can only select the MP3  
folder saved on the device that  
currently displays the photo.  
2/13  
Hide  
Option  
Exit  
Slideshow  
BGM  
Options  
Number of selected photos  
Hides the option window.  
To display the options, press OK.  
Return to Photo List.  
Hide  
EXIT  
Option  
Description  
Slideshow Starts or stops a slideshow with selected  
photos.  
If there are no selected photos, all pho-  
tos saved in the current folder display  
during a slideshow.  
Select Option to set the speed and view  
mode of the slideshow.  
BGM  
Turns the background music on or off.  
To set the background music folder,  
select Option.  
Photo options  
1 Press MENU to show the Option menus.  
You can adjust Option by MENU button  
on the remote control.  
2 Press the Navigation buttons to scroll to Set  
Photo View., Set Video. or Set Audio. and  
press OK.  
Rotates photos clockwise (90°, 180°,  
270°, 360°).  
Rotate  
NOTE  
NOTE  
y The supported photo size is  
limited. You cannot rotate a  
photo if the resolution of the  
rotated width is larger than the  
supported resolution size.  
y Option values changed in Movie List does  
not affect Photo List and Music List.  
y Option value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
Enlarges the image to 200% or 400%.  
Zoom  
NOTE  
y Zoom to 200% or 400% only  
work for image of 1372×772  
pixel size or larger.  
y For image of 960×540 pixel  
size or larger, only zoom to  
400% works properly.  
38 MAINTENANCE  
When you select the Set Photo View,  
1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM.  
2 Press the Navigation buttons to scroll to make appropriate adjustments.  
Transition Effect Option  
Option  
Description  
Sliding  
Pushes the current slide out of view as it plays to the next slide.  
Stairs  
Pushes the current slide in a staircase shape as it plays to the next slide.  
Door Open  
/Close  
Pushes the current slide like opening or closing the door as it plays to the next slide.  
Pushes the current slide like drawing or pulling down the blind as it plays to the next slide  
Shutter  
Fade In  
Fades the slide out slowly before playing to the next slide.  
MAINTENANCE 39  
When you select the Set Video,  
Listening to music  
1 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
1 Press the Navigation buttons to scroll to My Me-  
dia and press OK.  
2 Press the Navigation buttons to scroll to Music  
When you select the Set Audio,  
List and press OK.  
1 Press the Navigation buttons to scroll to show  
3 Press the Navigation buttons to scroll to a folder  
the Sound Mode, Clear Voice II or Balance.  
you want and press OK.  
2 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
4 Press the Navigation buttons to scroll to a file  
you want and press OK.  
Page 1/1  
Music List  
Page 1/1  
USB External  
Drive1  
001.  
-
B01.mp3  
B05.mp3  
002. -B02.mp3  
00:00  
003. B03.mp3  
00:00  
004.  
-
B04.mp3  
00:00  
00:00  
005.  
-
00:00  
Move  
View  
PAGE  
Page Change  
Exit  
Change Numbers  
Mark Mode  
To Movie List  
Page 1/1  
Music List  
Mark Mode  
Page 1/1  
USB External  
Drive1  
001.  
-
B01.mp3  
B05.mp3  
002. -B02.mp3  
00:00  
003. B03.mp3  
00:00  
004.  
-
B04.mp3  
00:00  
00:00  
005.  
-
00:00  
Move  
Unmark All  
View  
PAGE  
Page Change  
Exit  
Mark All  
Exit Mark Mode  
Play Marked  
Menu  
Description  
Play Marked Display the selected music file.  
Mark All  
Mark all music files on the screen.  
Unmark All Deselect all marked music files.  
Exit Mark Mode Exit the Mark Mode.  
5 Play music.  
40 MAINTENANCE  
Tips for playing music files  
6 Control playback by using the following buttons.  
This unit cannot support the ID3 Tag  
embedded MP3 files.  
y
Page 1/1  
Music List  
3 file(s) Marked  
Drive1  
Page 1/1  
NOTE  
004. - B04.mp3  
00:00  
005. - B05.mp3  
00:00  
006. - B06.mp3  
00:00  
007. - B07.mp3  
00:00  
008. - B08.mp3  
00:00  
◄►  
005. - B05.mp3  
02:30 / 03:25  
y Non-supported files are displayed the pre-  
view image by icon only  
y Abnormal files are displayed in the form of  
bitmap  
MENU  
◄◄  
►►  
Option  
Hide  
Exit  
Play with Photo  
II  
.
.
y A damaged or corrupted music does not play  
but displays 00:00 in playtime.  
Button  
Description  
Stops playback  
y A music downloaded from a paid service with  
copyright protection does not start but dis-  
plays inappropriate information in playtime.  
y If you press OK, r buttons, screen saver is  
stopped.  
y The PLAY(s), Pause(t), r , w, v but-  
tons on the remote control are also available  
in this mode.  
Plays a music file  
Pauses or resumes playback  
Skips to the next file  
Skips to the previous file  
When playing,  
or  
When you press the  
button, the pre-  
vious music file will be played.  
y You can use the w button to select the next  
music and the v button to select the previ-  
ous music.  
When you press the  
button, the next  
music file will be played.  
Green  
button  
Start playing the selected music files and  
then move to the Photo List.  
file name  
Press the  
ENERGY SAVING button  
repeatedly to change the brightness of  
your screen.  
ENERGY  
SAVING  
002. B02.mp3  
► 00:31 / 04:04  
Show the Option menu.  
Option  
Hide  
Hides the option window.  
Time elapsed /Duration  
To display the options, press OK.  
When you press the EXIT button while  
the Music player is displayed, only the  
music will be stopped and the player will  
not return to normal viewing.  
EXIT  
When you press the EXIT button while  
the music is stopped or while the music  
player is hidden, the player will return to  
normal viewing.  
When using the < or > button during  
playback a cursor indicating the position  
can be played.  
or  
MAINTENANCE 41  
Music options  
DivX® VOD Guide  
DivX® VOD Registration  
1 Press MENU to access the Pop-Up menus.  
In order to play purchased or rented DivX® VOD  
contents, you should register your device with 10  
digit DivX registration code from your device at  
2 Press the Navigation buttons to scroll to Set Au-  
dio Play. or Set Audio. and press OK.  
NOTE  
1 Press MENU to access the main menus.  
y Option values changed in Movie List does  
not affect Photo List and Music List.  
y Option value changed in Photo List and Mu-  
sic List are changed likewise in Photo List  
and Music List excluding Movie List.  
2 Press the Navigation buttons to scroll to MY  
MEDIA and press OK.  
3 Press the Blue button.  
4 Press the Navigation buttons to scroll to DivX  
Reg. Code and press OK.  
5 View the registration code of your display.  
When you select the Set Audio Play.,  
6 When you are finished, press EXIT.  
1 Press the Navigation buttons to scroll to select  
When you return to the previous menu, press  
BACK.  
the Repeat or Random.  
2 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
You must register your device to  
play DivX protected videos.  
Registration code : **********  
When you select the Set Audio,,  
Close  
1 Press the Navigation buttons to scroll to select  
the Sound Mode, Clear Voice II or Balance.  
NOTE  
2 Press the Navigation buttons to scroll to make  
appropriate adjustments.  
y While you are checking the registration  
code, some buttons may not work.  
y If you use the DivX registration code  
of another device, you cannot play the  
rented or purchased DivX file. Make sure  
to use the DivX registration code as-  
signed to your TV.  
y The video or audio files that are not con-  
verted by the standard DivX codec may  
be corrupted or not be played.  
y The DivX VOD code allows you to acti-  
vate up to 6 devices under one account.  
42 MAINTENANCE  
DivX® VOD Deregistration  
You should deregister your device with 8 digit DivX  
com/vod.  
1 Press MENU to access the main menus.  
2 Press the Navigation buttons to scroll to MY  
MEDIA and press OK.  
3 Press the Blue button.  
4 Press the Navigation buttons to scroll to Deacti-  
vation and press OK.  
5 Press the Navigation buttons to select Yes to  
confirm.  
Deregistration code :  
********  
Continue with registration?  
Yes  
No  
6 When you are finished, press EXIT.  
When you return to the previous menu, press  
BACK.  
NOTE  
Once the deregistration is executed, you  
must register your device again to see  
DivX® VOD contents.  
y
CUSTOMIZING SETTINGS 43  
CUSTOMIZING SETTINGS  
Accessing main menus  
Press MENU to access the main menus.  
1
2
3
4
Press the Navigation buttons to scroll to one of the following menus and press OK.  
Press the Navigation buttons to scroll to the setting or option you want and press OK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
Adjusts the image size,  
quality, or effect  
Adjusts the sound quality,  
effect, or volume level  
Sets the time, date or  
Timer feature  
PICTURE  
AUDIO  
TIME  
MY MEDIA  
Display and play  
movie, photo and  
music content  
OPTION  
NETWORK  
MY MEDIA  
stored on your USB  
Customizes the general settings  
Sets up the network  
setting.  
 
44 CUSTOMIZING SETTINGS  
PICTURE settings  
Move  
OK  
PICTURE  
• Aspect Ratio  
: 16:9  
Press MENU to access the main menus.  
1
2
Energy Saving : Off  
• Smart Energy Saving  
• Picture Mode  
Press the Navigation buttons to scroll to PICTURE and  
press OK.  
: Standard  
• Backlight  
• Contrast  
• Brightness  
• Sharpness  
• Color  
70  
100  
50  
50  
60  
0
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
- To return to the previous level, press BACK.  
R
G
C
• Tint  
W
• Color Temp.  
0
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
• Advanced Control  
• Picture Reset  
• Screen  
The available picture settings are described in the following:  
Setting  
Description  
Aspect Ratio  
Sets to automatically adjust the screen brightness corresponding to the surroundings.  
Energy  
Saving  
Option  
Off  
The backlight is off.  
Minimum/  
Medium/  
Maximum  
Selects the brightness level of the backlight.  
Screen off  
The screen turns off in 3 seconds.  
Smart Energy Adjusts the backlight and contrast depending on the screen brightness.  
Saving  
* 47WV30-BAAL does not support this function.  
Level  
On  
Enables the Smart Energy Saving function to save power consumption as much  
as the value set in the smart energy saving rate.  
Off  
Disables the Smart Energy Saving function.  
Picture Mode  
Selects one of the preset image or customizes options in each mode for the best Monitor set screen  
performance. You are also able to customize advanced options of each mode.  
The available preset picture modes vary depending on the Monitor set .  
Mode  
Vivid  
Adjusts the video image for the retail environment by enhancing the contrast,  
brightness, Color, and sharpness.  
Standard  
Cinema  
Adjusts the image for the normal environment.  
Optimizes the video image for a cinematic look to enjoy movies as if you are in a  
movie theater.  
Sport  
Optimizes the video image for high and dynamic actions by emphasizing primary  
Colors such as white, grass, or sky blue.  
Game  
Optimizes the video image for a fast gaming screen such as PCs or games.  
 
CUSTOMIZING SETTINGS 45  
Setting  
SCREEN  
Description  
Customizes the PC display options in RGB mode.  
(In RGB-PC  
Mode Only)  
Option  
Resolution  
Auto Configure  
Selects a proper resolution.  
Sets to adjust the screen position, clock, and phase automatically.  
The displayed image may be unstable for a few seconds while the configuration is  
in progress.  
Position/Size/  
Phase  
Adjusts the options when the picture is not clear, especially when characters are  
shaky, after the auto configuration.  
Reset  
Restores the options to the default setting.  
Basic image options  
Setting  
Description  
Backlight  
Adjusts the brightness of the screen by controlling the LCD backlight. If you decrease the  
brightness level, the screen becomes darker and the power consumption will be reduced  
without any video signal loss.  
Contrast  
Increases or decreases the gradient of the video signal. You may use Contrast when the  
bright part of the picture is saturated.  
Brightness  
Sharpness  
Adjusts the base level of the signal in the picture. You may use Brightness when the dark  
part of the picture is saturated.  
Adjusts the level of crispness in the edges between the light and dark areas of the picture.  
The lower the level, the softer the image.  
Color  
Adjusts the balance between red and green levels.  
Adjusts intensity of all Colors.  
Tint  
Color Temperature  
Advanced Control  
Picture Reset  
Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish.  
Customizes the advanced options.  
Restores the options to the default setting.  
NOTE  
If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game the subsequent  
menus will be automatically set.  
y
You cannot adjust color and tint in the RGB-PC / HDMI-PC mode.  
y
y
y
When using the Smart Energy Saving function, the screen may look saturated in the white area of a still image.  
If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is disabled.  
46 CUSTOMIZING SETTINGS  
Advanced image options  
Setting  
Description  
Dynamic Contrast  
(Off/Low/Medium/  
High)  
Optimizes the contrast automatically according to the brightness of the reflection.  
(This function can be used only under Component.)  
Dynamic Color  
(Off/Low/High)  
Adjusts the Color of the reflection automatically to reproduce natural colurs as close as  
possible.(This function can be used only under Component.)  
Clear White  
Make the white area of screen brighter and more white.  
(Off/Low/High)  
Skin Color  
It detects the skin area of video and adjusts it to express a natural skin color.  
Removing the noise up to the point where it does not damage the original picture. (This  
Noise Reduction  
(Off/Low/Medium/High) function can be used only under Component.)  
Digital Noise  
This option reduces the noise produced while creating digital video signals.  
Reduction  
(Off/Low/Medium/High)  
Gamma  
Set your own gamma value.  
(Low/Medium/High)  
On the monitor, high gamma values display whitish images and low gamma values display  
high contrast images.  
Black Level  
Low/High  
Low: The reflection of the screen gets darker.  
High: The reflection of the screen gets brighter.  
y
y
Function works in the following mode - Component, HDMI, DVI-D adjusts the contrast and the  
brightness of the screen using the black level of the screen.  
 
CUSTOMIZING SETTINGS 47  
AUDIO settings  
Move  
OK  
AUDIO  
• Clear Voice II  
• Balance  
: Off  
Press MENU to access the main menus.  
1
2
L
R
0
• Sound Mode  
: Standard  
Press the Navigation buttons to scroll to AUDIO and press  
OK.  
• Infinite Sound: Off  
• Treble  
• Bass  
• Reset  
50  
50  
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
• Digital Audio Input : Audio In  
• Speaker : On  
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available audio options are described in the following:  
Setting  
Description  
Clear Voice ll  
Balance  
By differentiating the human sound range from others, it helps users listen to human voices better.  
Use this function to balance sound from the left and right speakers.  
Sound Mode  
The best sound tone quality will be selected automatically depending on the video type that you're  
currently watching.  
Mode  
Standard  
Music  
The most commanding and natural audio.  
Select this option to enjoy the original sound when listening to  
the music.  
Cinema  
Sports  
Game  
Select this option to enjoy sublime sound.  
Select this option to watch sports broadcasting.  
To enjoy dynamic sound when playing a game.  
NOTE  
If sound quality or volume is not at the level you want, it is recommended to use a separate home  
theater system or amplifier to cope with different user environments.  
Option  
Infinite Sound  
LG's Infinity Sound option provides 5.1 channel stereo sound  
from two speakers.  
Treble  
Controls the dominant sounds in the output. When you turn up  
the treble, it will increase the output to the higher frequency  
range.  
Bass  
Controls the softer sounds in the output. When you turn up the  
bass, it will increase the output to the lower frequency range.  
Reset  
Resets the sound mode to the default setting.  
Digital Audio  
Input  
HDMI: Outputs the sound of digital signals in digital input (HDMI) mode through the external  
monitor speaker connected to the speaker out port of the monitor.  
Audio In: Outputs the sound received from the Audio In port in digital input (HDMI) mode through  
the external speaker connected to the speaker out port of the monitor.  
Speaker  
*The speaker is sold separately.  
On: Outputs the sound through the external speaker connected to the speaker out port of the  
monitor.  
Off: Outputs the sound through the external speaker connected to the speaker out port of the  
monitor. Use this option when using an external sound device.  
 
48 CUSTOMIZING SETTINGS  
TIME settings  
Move  
OK  
TIME  
• Clock  
Press MENU to access the main menus.  
1
2
3
• Off Time  
: Off  
: Off  
: Off  
: Off  
: Off  
• On Time  
Press the Navigation buttons to scroll to TIME and press OK.  
• Sleep Timer  
• Power On Delay  
• Auto Off  
Press the Navigation buttons to scroll to the setting or option  
you want and press OK.  
• Automatic Standby : Off  
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
4
The available time settings are described in the following:  
Setting  
Description  
Clock  
Sets the time feature.  
Sets the time to turn on or off the Monitor set.  
On/Off Time  
Sleep Timer  
Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and  
turn it on again, the Sleep Timer will be set to off.  
Power on delay  
Auto off  
When connecting multiple monitors and turning the power on, the monitors are turned on  
individually to prevent overload.  
If Auto off is active and there is no input signal, the set switches to off mode automatically after 15  
minutes.  
Automatic  
Standby  
If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.  
NOTE  
Once the on or off time is set, these functions operate daily at the preset time.  
y
y
y
The scheduled power-off function works properly only when the device time is set correctly.  
When the scheduled power-on and power-off times are the same, the power-off time has priority over the power-on time  
if the set is turned on, and vice versa if the set is turned off.  
 
CUSTOMIZING SETTINGS 49  
OPTION settings  
Move  
OK  
OPTION  
• Language  
• ISM Method  
• DPM Select  
• Fail Over  
• Factory Reset  
• Set ID  
Press MENU to access the main menus.  
1
2
: Normal  
: Off  
Press the Navigation buttons to scroll to OPTION and press  
OK.  
: Off  
: 1  
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
• Tile Mode  
• Portrait Mode  
• Fan  
- To return to the previous level, press BACK.  
• Product/Service Info.  
When you are finished, press EXIT.  
When you return to the previous menu, press  
BACK.  
The available option settings are described in the following:  
Setting  
Language  
Description  
To choose the language in which the control names are displayed.  
ISM Method  
Leaving a fixed image on the screen for a long time may cause damage to the screen and cause  
image burn-in. To use the product for a long period of time, use a screen saver on the PC or utilize  
the residual image prevention function on the product, and when the product is not used, turn off  
the power. Burn-in and related problems are not covered by the warranty on this product.  
Setting  
Normal  
Orbiter  
Sets it if image sticking is never a problem  
May help prevent ghost images. However, it is best not to allow any fixed  
image to remain on the screen. To avoid a permanent image on the screen,  
the screen will move every 2 minutes.  
Inversion  
This function inverts the panel color of the screen. The panel color is  
automatically inverted every 30 minutes.  
White wash  
Removes a ghost image on the screen.  
Use sparingly. Watch the sets normally for a while before using this feature to  
see if the ghost image disappears on its own.  
DPM Select  
Fail Over  
A user can choose to turn the power saving mode on / off.  
If there is no input signal, it automatically switches to another input with signal.  
* 47WV30-BAAL does not support this function.  
Setting  
Off  
Stops auto switch of the input source.  
Auto  
Switches to another input source with video signal if no video signal comes  
from the current input source.  
Manual  
Selects the priority of input source for auto switch.  
When several input sources are found, the input source with a higher priority  
will be selected.  
Factory Reset  
Select this option to return to the default factory settings.  
 
50 CUSTOMIZING SETTINGS  
Setting  
Description  
Set ID  
You can assign a unique Set ID NO (name assignment) to each product when several products  
are connected for display. Specify the number (1 to 255) using the button and exit. Use the  
assigned Set ID to individually control each product using the Product Control Program.  
NOTE  
If you change SET ID No, the value of ‘Power On Delay’ will be set to (SET ID No)/3(sec)  
to prevent power consumption overload.  
ex) SET ID No = 31 Power On Delay = 10(=31/3)  
Tile Mode  
Setting  
Tile Mode  
You can display the image on multiple sets and view it in a larger size. To use  
the Tile Mode on multiple sets with same signal.  
Auto Config.  
This option optimizes the screen when you connect the set to a new computer  
or change to a different mode. If you are not satisfied with the adjustment, you  
can manually change the "Position" or "Size".  
Position  
Size  
You can set the position.  
You can set the size.  
Natural  
The image is omitted by the distance between the screens to be naturally  
shown.  
Reset  
Function to initialize and release Tile.  
All Tile setting are released when selecting Tile recall and the screen returns to  
Full screen.  
Portrait mode  
Rotate OSD clockwise (Off, 90°,270°)  
Option  
Off  
Do not rotate OSD  
90°  
Rotate OSD clockwise 90°.  
Rotate OSD clockwise 270°.  
270°  
90°  
270°  
CUSTOMIZING SETTINGS 51  
Setting  
Description  
Fan  
Setting  
Mode  
This option indicates the monitor's internal temperature and controls the fan.  
• Auto: Switches the fan on and off according to the set temperature.  
• On: The fan is always switched on.  
• Manual: Switches the fan on and off according to user settings.  
Hysteresis  
The difference in temperature between when the fan is switched on and when  
it is off.  
Set Temperature Set the temperature at which the fan is switched on.  
Current  
Current temperature inside the set.  
Temperature  
NOTE  
We recommend that you use the Auto mode to prevent any malfunctions resulting from  
incorrect fan settings.  
y
y
If the interior temperature of the set exceeds 80°C, the set will be turned off  
automatically for safety reasons.  
Product/Service  
Info.  
Displays the model name, software version, serial number, IP address, MAC address and home  
page.  
52 CUSTOMIZING SETTINGS  
Tile Mode  
This monitor can be tiled with additional monitors to create a large tiled display.  
3X3  
2X1  
2X2  
Off  
When using 9 monitors  
When using 2 monitors  
When using 4 monitors  
When the Tile Mode  
option is disabled  
ID 3  
ID 6  
ID 2  
ID 1  
ID 2  
ID 5  
ID 2  
ID 1  
ID 1  
ID 4  
ID 4  
ID 3  
Tile ID  
ID 9  
ID 8  
ID 7  
4X4  
5X5  
When using 25 monitors  
When using 16 monitors  
ID 3  
ID 4  
ID 5  
ID 2  
ID 1  
ID 1  
ID 5  
ID 3  
ID 7  
ID 4  
ID 8  
ID 2  
ID 6  
ID 8  
ID 9  
ID 10  
ID 15  
ID 7  
ID 6  
ID 13  
ID 18  
ID 23  
ID 14  
ID 19  
ID 24  
ID 12  
ID 11  
ID 16  
ID 21  
ID 11  
ID 15  
ID 12  
ID 16  
ID 10  
ID 14  
ID 9  
ID 20  
ID 25  
ID 17  
ID 22  
ID 13  
Tile Mode - Natural mode  
When active, the part of the image that would normally be displayed in the gap between the monitors is  
omitted.  
Before  
After  
CUSTOMIZING SETTINGS 53  
NETWORK settings  
Move  
OK  
NETWORK  
• Player Name Setting  
• Network Setting  
• Network Status  
• Server IP Setting  
• Server IP Status  
Press MENU to access the main menus.  
1
2
: Not connected  
: Not connected  
Press the Navigation buttons to scroll to NETWORK and  
press OK.  
Press the Navigation buttons to scroll to the setting or  
option you want and press OK.  
3
4
- To return to the previous level, press BACK.  
When you are finished, press EXIT.  
When you return to the previous menu, press BACK.  
The available option settings are described in the following:  
Setting  
Description  
Player Name  
Setting  
Sets the player name used in SuperSign Elite-W Lite server.(Up to 20 characters)  
Network Setting  
Network Status  
Configure the network settings.  
Display the network status.  
- Internet is connected : Extermally connected  
- Netmwork is connected : Only internally connected  
- Not connected : When there is no network connection  
Server IP Setting Sets the IP address of the computer (server) on which SuperSign Elite-W Lite server is installed.  
Server IP Status  
Displays the connection status with the server.  
- Not connected : When there is no network connection with SuperSign Elite-W Lite server  
- Waiting for approval : When network connection with SuperSign Elite-W Lite server has been  
made, but access to server has not been approved by the server  
- Rejected : When network connection with SuperSign Elite-W Lite server has been made, but  
access to server has been rejected by the server  
- Internet is connected : When network connection with SuperSign Elite-W Lite server has been  
made and access to server has also been approved by the server  
NOTE  
y Network setting menu will not be available until the display connected to physical network.  
 
54 MAKING CONNECTIONS  
MAKING CONNECTIONS  
Connect various external devices to the ports on the Monitor set’s back panel.  
Find an external device you want to connect to your Monitor set shown in the following illustration.  
Check the connection type of the external device.  
1
2
3
Go to the appropriate illustration and check the connection details.  
HD Receiver  
DVD  
Component - (See p.56)  
Component - (See p.56)  
Speaker  
USB  
Memory storage  
PC  
Camcorder/Camera  
Gaming device  
Component - (See p.56)  
NOTE  
y If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device.  
y AV(CVBS) can be supported only in 47WV30BR and 47WV30MS models.  
MAKING CONNECTIONS 55  
DVI - HDMI connection  
Connecting to a HD receiver,  
DVD or VCR player  
Transmits the digital video signal from an external  
device to the Monitor set. Connect the external  
device and the Monitor set with the DVI-HDMI  
cable as shown in the following illustration. To  
transmit an audio signal, connect an optional audio  
cable.  
Connect a HD receiver, DVD, or VCR player to the  
Monitor set and select an appropriate input mode.  
HDMI connection  
Transmits the digital video and audio signals from  
an external device to the Monitor set. Connect the  
external device and the Monitor set with the HDMI  
cable as shown on the following illustration.  
Peripheral  
Back of the Monitor Set  
/DVI  
(not included)  
(not included)  
(not included)  
AUDIO  
(RGB/DVI)  
/DVI  
REMOTE  
CONTROL IN  
Peripheral  
Back of the Monitor Set  
NOTE  
Use a High Speed HDMI™ Cable.  
High Speed HDMI™ Cables are tested to  
carry an HD signal up to 1080p and higher.  
Dolby Digital is not supported.  
y
y
y
CAUTION  
When connecting  
an HDMI cable as  
illustrated, remove  
the screw on the  
y
HDMI connector first.  
 
56 MAKING CONNECTIONS  
Component connection  
AV connection (Only 47WV30BR  
and 47WV30MS)  
Transmits the analog video and audio signals from  
an external device to the Monitor set. Connect  
the external device and the Monitor set with a  
component cable as shown on the following  
illustration. To transmit an audio signal, connect an  
optional audio cable.  
Transmits the analog video and audio signals from  
an external device to the Monitor set. Connect the  
external device and the Monitor set with the RCA  
cable as shown on the following illustration. To  
transmit an audio signal, connect an optional audio  
cable.  
Peripheral  
Peripheral  
AV (CVBS)  
(not included)  
(not included)  
(not included)  
(not included)  
COMPONENT IN  
COMONENT IN  
VIDEO AV IN  
AUIDO  
Back of the Monitor Set  
VIDEO AV IN  
AUIDO  
Back of the Monitor Set  
NOTE  
NOTE  
y AV(CVBS) can be supported only in 47WV-  
30BR and 47WV30MS models.  
For AV (CVBS) connection, the red and blue  
cables in a shared interface are not in use.  
y
y AV(CVBS) can be supported only in 47WV-  
30BR and 47WV30MS models.  
   
MAKING CONNECTIONS 57  
Connecting to the LAN  
Connecting to a USB  
Connect a USB storage device such as s USB  
flash memory, external hard drive, MP3 player or  
a USB memory card reader to the Monitor set and  
access the USB menu to use various multimedia  
files. "Connecting USB storage devices" on See  
LAN connection  
Connect the LAN cable.  
Using a router(Switching Hub)  
A
LAN  
Switching Hub  
or  
Product  
PC  
Using the Internet.  
B
 
58 MAKING CONNECTIONS  
Daisy Chain Monitors  
Use this function to share the RGB video signal with other monitors without having to use a separate signal  
splitter box.  
To use different products connected to each other Connect one end of the signal input cable (15-pin  
D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN  
connector of other products  
RGB Cable  
15-pin D-Sub Signal Cable  
(Max 3m)  
Set 1  
Set 2  
Set 3  
Set 4  
DVI Cable  
DVI Cable  
(Max 3m)  
DVI-OUT  
DVI-IN  
DVI-OUT  
DVI-IN  
DVI-OUT  
DVI-IN  
Set 1  
Set 2  
Set 3  
NOTE  
y "Input signal may be degraded or lost when multiple monitors are connected. For DVI, in general, up  
to 12 monitors can be connected via the DVI Out port (at the recommended resolution) if the signal  
is stable and there is no cable loss. (If you want to connect more than this number of monitors, we  
recommended that you use a distributor.)  
y When the tile mode is configured via DVI cables, only the monitor that receives first signals can play  
HDCP-encrypted content. (The DVI Out port does not support HDCP).  
y If the signal cable between the product and your PC is too long, make sure to use the DVI (RGB)  
booster or DVI (RGB) optical cable.  
y If input signals are received through the HDMI/DP cable, multiple monitors cannot be connected via  
the DVI Out port"  
TROUBLESHOOTING 59  
TROUBLESHOOTING  
No image is displayed  
Problem  
Resolution  
Is the product power cord  
connected?  
See if the power cord is properly connected to the outlet.  
y
Power is on, power indicator  
is blue but the screen appears  
extremely dark.  
Adjust brightness and contrast again.  
Backlight may need repair.  
y
y
Does the 'Invalid Format'  
message appear?  
The signal from the PC (video card) is out of the vertical or horizontal  
frequency range of the product. Adjust the frequency range by  
referring to the Specifications in this manual.  
* Maximum resolution (47WV30MS,47WV30BR)  
RGB : 1920 X 1080 @ 60 Hz  
y
HDMI/DVI : 1920 X 1080 @ 60 Hz  
* Maximum resolution (47WV30BS,47WV30-BAAM,47WV30-BAAL)  
RGB : 1366 X 768 @ 60 Hz  
HDMI/DVI : 1366 X 768 @ 60 Hz  
Does the 'No Signal' message  
appear?  
The signal cable between PC and product is not connected. Check  
the signal cable.  
Press the 'INPUT' menu in the remote Control to check the input  
signal.  
y
y
'Unknown Product' message appears when the product is connected.  
Problem  
Resolution  
Did you install the driver?  
Install the product driver, which is provided with the product, or  
download it from the web site. (http://www.lg.com)  
See if the plug&play function is supported by referring to the video  
card user manual.  
y
y
60 TROUBLESHOOTING  
The screen image looks abnormal.  
Problem  
Resolution  
Is the screen position wrong?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select the optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Position OSD  
menu.  
y
See if the video card resolution and frequency are supported by the  
product. If the frequency is out of range, set to the recommended  
resolution in the Control Panel "Display" Setting menu.  
y
y
Do thin lines appear on the  
background screen?  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Clock OSD  
menu.  
Horizontal noise appears or the  
characters look blurred.  
D-Sub analog signal - Press the "AUTO" button in the remote control  
to automatically select an optimal screen status that fits into the  
current mode. If adjustment is not satisfactory, use the Phase OSD  
menu.  
y
y
The screen is displayed  
abnormally.  
The proper input signal is not connected to the signal port. Connect  
the signal cable that matches with the source input signal.  
After-image appears on the product.  
Problem  
Resolution  
After-image appears when the  
product is turned off.  
If you use a fixed image for a long time, the pixels may be damaged  
quickly. Use the ISM mode.  
y
The audio function does not work.  
Problem  
Resolution  
No sound?  
See if the audio cable is connected properly.  
Adjust the volume.  
See if the sound is set properly.  
y
y
y
Sound is too dull.  
Sound is too low.  
Select the appropriate equalize sound.  
Adjust the volume.  
y
y
TROUBLESHOOTING 61  
Screen color is abnormal.  
Problem  
Resolution  
Screen has poor color resolution  
(16 colors).  
Set the number of colors to more than 24 bits (true color) Select  
Control Panel - Display - Settings - Color Table menu in Windows.  
y
y
y
Screen color is unstable or  
mono-colored.  
Check the connection status of the signal cable. Or, re-insert the PC  
video card.  
Do black spots appear on the  
screen?  
Several pixels (red, green, white or black color) may appear on the  
screen, which can be attributable to the unique characteristics of the  
LCD panel. It is not a malfunction of the LCD.  
The operation does not work normally.  
Problem  
Resolution  
The power suddenly turned off.  
Is the sleep timer set?  
Check the power control settings. Power interrupted.  
y
y
Remote controller doesn’t work.  
Remote controller will not work in case SET ID and Picture ID are  
different.  
y
62 SPECIFICATIONS  
SPECIFICATIONS  
Screen Type  
1192.8 mm Wide (46.96 inch) TFT (Thin Film Transistor)  
LCD (Liquid Crystal Display) Panel.  
LCD Panel  
Visible diagonal size : 1192.8 mm  
Pixel Pitch  
0.5415 mm (H) x 0.5415 mm (V)  
Max. Resolution  
RGB : 1920 X 1080 @ 60 Hz  
Video Signal  
(47WV30MS,47WV30BR)  
HDMI/DVI : 1920 X 1080 @ 60 Hz  
- It may not be supported depending on the OS or video card type.  
Max. Resolution  
RGB : 1366 X 768 @ 60 Hz  
(47WV30BS,47WV30-BAAM, HDMI/DVI : 1366 X 768 @ 60 Hz  
- It may not be supported depending on the OS or video card type.  
47WV30-BAAL)  
Recommended Resolution  
RGB : 1366 X 768 @ 60 Hz  
HDMI/DVI : 1366 X 768 @ 60 Hz  
- It may not be supported depending on the OS or video card type.  
Horizontal Frequency  
Vertical Frequency  
Synchronization Type  
RGB : 30 kHz to 68 kHz  
HDMI/DVI : 30kHz to 68 kHz  
RGB : 56 Hz to 75 Hz  
HDMI/DVI : 56 Hz to 63 Hz  
Separate Sync, Composite Sync, Digital, SOG  
15-pin D-Sub type(RGB), Component, HDMI/DVI(digital),  
AV(CVBS), RS-232C, LAN, USB  
Input Connector  
Power  
* AV(CVBS) can be supported only in 47WV30BR and  
47WV30MS models.  
Rated Voltage  
AC 100-240 V~ 50 / 60 Hz 2.2 A  
Power Consumption  
On Mode : 220 W Max.  
Off Mode : ≤ 0.5 W  
Dimensions  
(Width x Height x  
Depth) / Weight  
* Wall Bracket available VESA dimensions:  
800 mm x 400 mm  
1047 mm x 592 mm x 91.1 mm / 29 kg  
Operating Temperature  
Operating Humidity  
Storage Temperature  
Storage Humidity  
0 °C to 40 °C  
Environmental  
conditions  
10 % to 80 %  
-20 °C to 60 °C  
5 % to 95 %  
* Applicable only for models that support the speakers  
RMS Audio Output  
Input Sensitivity  
10 W + 10 W (R + L)  
0.7 Vrms  
Audio  
Speaker Impedance  
8 Ω  
Product specifications shown above may be changed without prior notice due to upgrade of product  
functions.  
SPECIFICATIONS 63  
PC supported mode  
Horizontal  
Frequency(kHz)  
Vertical  
Frequency(Hz)  
Resolution  
*1 720 x 400  
*2 640 x 480  
*3 800 x 600  
31.468  
70.8  
31.469  
59.94  
37.879  
60.317  
49.725  
74.55  
4
832 x 624  
48.363  
60  
*5 1024 x 768  
*6 1280 x 720  
*7 1366 x 768  
*8 1280 x 1024  
*9 1360 X 768  
44.772  
59.855  
47.71  
59.79  
63.981  
60.02  
47.72  
59.799  
*10 1920 X 1080 67.5  
60 (Only 47WV30BR, 47WV30MS)  
1 to 10: RGB Mode  
* : HDMI/DVI mode  
DTV Mode  
Resolution  
AV/Component HDMI(DTV)  
480i  
o
o
o
o
o
o
x
x
x
o
o
o
o
o
576i  
480p  
576p  
720p  
1080i  
1080p  
64 RS-232 CONTROL  
RS-232 CONTROL  
You can control several products at a time by connecting them to a single PC.  
In the Option menu, Set ID must be between 1 and 255 without being duplicated.  
y
y
Connecting the cable  
Connect the RS-232C cable as shown in the picture.  
The RS-232C protocol is used for communication between the PC and product. You can turn the  
product on/off, select an input source or adjust the OSD menu from your PC. This monitor features  
two RS-232 ports. One input and one output. This allows you to daisy-chain monitors without having  
to use a splitter box.  
y
RS-232C Cable  
PC  
Set 1  
Set 2  
Set 3  
Set 4  
NOTE  
Use RS-232C cables as shown in the picture.  
If a cable bigger than the ones shown in the picture is used  
in the connector, the connection may not be flawless due to  
interference between the cables.  
y
y
15 mm or  
less  
Pin 1 of RS-232C Out should be connected with Pin 4 of RS-  
232C In.  
y
RS-232C Configurations  
Communication Parameter  
Baud Rate : 9600 buad Rate (UART)  
Data Length : 8 bit  
Parity Bit : None  
Stop Bit : 1bit  
Flow Control : None  
y
y
y
y
y
y
y
8-Wire Configurations (Cross-over RS-232C cable)  
PC  
Set  
Communication Code : ASCII code  
Use a crossed (reverse) cable  
D-Sub 9  
(Female)  
D-Sub 9  
(Female)  
RS-232 CONTROL 65  
Command Reference List  
COMMAND  
DATA  
(Hexadecimal)  
1
k
x
k
j
2
01  
02  
03  
04  
05  
06  
07  
08  
09  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
Power  
a
00H to 01H  
Input Select  
b
c
q
x
g
h
k
i
Refer to ‘02. Input Select’  
Refer to ‘03. Aspect Ratio’  
Refer to ‘04. Energy Saving’  
00H to 04H  
Aspect Ratio  
Energy Saving  
Picture mode  
Contrast  
d
k
k
k
k
k
x
f
00H to 64H  
Brightness  
00H to 64H  
Sharpness  
00H to 64H  
Color  
00H to 64H  
Tint  
j
00H to 64H  
Color Temperature  
H Position  
u
q
r
00H to 64H  
00H to 64H  
V Position  
f
23H to 41H  
H Size  
f
s
u
t
00H to 64H  
Auto configuration  
Balance  
j
01H  
k
d
k
k
d
k
k
f
00H to 64H  
Sound mode  
Treble  
y
r
01H to 05H  
00H to 64H  
Bass  
s
v
e
f
00H to 64H  
Speaker  
00H to 01H  
Volume Mute  
Volume Control  
Time 1(Years/ Months/ Days)  
Time 2(Hours/ Minutes/Seconds)  
Off Timer(Repeat mode/ Time)  
On Timer(Repeat Mode/ Time)  
On Timer Input  
Sleep Time  
00H to 01H  
00H to 64H  
g
x
d
e
u
f
Refer to ’23. Time 1’  
Refer to ’24. Time 2’  
Refer to ‘25. Off Timer’  
Refer to ’26. On Timer’  
Refer to ’27. On Timer Input’  
00H to 08H  
f
f
f
f
f
Power On Delay  
Automatic Standby  
Auto Off  
f
h
n
g
i
00H to 64H  
m
f
00H to 01H  
00H to 01H  
Language  
f
00H to 0AH  
ISM mode  
j
p
j
Refer to ‘33. ISM Method’  
00H to 01H  
DPM Select  
f
Fail Over Select  
Fail Over Input Select  
Reset  
m
m
f
i
00H to 02H  
j
Refer to ’36. Fail Over Input Select’  
00H to 03H  
k
d
z
i
Tile Mode  
d
d
d
Refer to ’38. Tile Mode’  
FFH  
Tile Mode Check  
Tile ID  
Refer to ’40. Tile ID’  
66 RS-232 CONTROL  
COMMAND  
DATA  
(Hexadecimal)  
1
d
d
d
d
d
d
d
m
k
d
f
2
41  
42  
43  
44  
45  
46  
47  
48  
49  
50  
51  
52  
53  
54  
55  
Tile H Position  
e
00H to 64H  
23H to 41H  
00H to 64H  
00H to 01H  
00H to 02H  
FFH  
Tile V Position  
f
g
j
Tile H Size  
Natural Mode (In Tile mode)  
FAN Control  
o
w
n
c
l
FAN Fault check  
Temperature Value  
Key  
FFH  
Refer to ‘48. Key’  
00H to 01H  
FFH  
OSD Select  
Elapsed time return  
Serial No. Check  
S/W Version  
l
y
z
m
n
o
FFH  
f
FFH  
White Balance Red Gain  
White Balance Green Gain  
White Balance Blue Gain  
j
00H to FEH  
00H to FEH  
00H to FEH  
j
j
Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are  
not executed and treated as NG.  
y
RS-232 CONTROL 67  
Transmission / Receiving Protocol  
Transmission  
[Command1][Command2][ ][Set ID][ ][Data][Cr]  
[Command1]: First command to control the set.  
[Command2]: Second Command to control the set.  
[Set ID]: Set ID wants to communicate with the set. Command for test is 00.  
[DATA]: Information passed to the set.  
y
y
y
y
y
y
[Cr]: Carriage Return. ASCII code ‘0x0D’.  
[
]: White Space. ASCII code ‘0x20’.  
Acknowledgement  
[a][ ][Set ID][ ][OK/NG][Data][x]  
In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data  
feedback presents status about each function.  
y
y
Note: In this mode, display will send the acknowledgement after power on processing completion.  
There might be a time delay between command and acknowledgement.  
Refer to ‘Real data mapping’ for hexadecimal data to decimal data.  
No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to  
‘00’(=0x00).  
y
y
Supports  
Model  
47WV30BS  
47WV30-BAAM  
47WV30BR  
47WV30-BAAL  
Data  
47WV30MS  
20H  
40H  
90H  
x
o
o
o
x
o
This table displays the models which the command supports(O: Supports, X: Not supports)  
The command does not have this table supports all displays.  
y
y
68 RS-232 CONTROL  
01. Power (Command: k a)  
- To control power On/Off the display.  
03. Aspect Ratio (Command: k c)  
- To adjust the screen format.  
Transmission  
Transmission  
[k][a][ ][Set ID][ ][Data][Cr]  
[k][c][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00: Power Off  
01: Power On  
01: 4:3  
02: 16:9  
04: Zoom  
Acknowledgement  
09: Just Scan(720p or higher)/ 1:1  
10~1F: Cinema Zoom 1~16  
[a][ ][Set ID][ ][OK/NG][Data][x]  
* Note: In this mode, display will send the  
acknowledgement after power on processing  
completion. There might be a time delay between  
command and acknowledgement.  
Acknowledgement  
[c][ ][Set ID][ ][OK/NG][Data][x]  
04. Energy Saving (Command: j q)  
- To control the energy saving function.  
Transmission  
[j][q][ ][Set ID][ ][Data][Cr]  
Data  
00: Off  
01: Minimum  
02: Medium  
03. Maximum  
05. Screen Off  
02. Input Select (Command: x b)  
- To select input source for display.  
Transmission  
[x][b][ ][Set ID][ ][Data][Cr]  
Acknowledgement  
Data  
20: AV  
[q][ ][Set ID][ ][OK/NG][Data][x]  
40: Component  
60: RGB PC  
70: DVI-D(PC)  
80: DVI-D(DTV)  
90: HDMI(DTV)  
A0: HDMI(PC)  
Acknowledgement  
[b][ ][Set ID][ ][OK/NG][Data][x]  
* Use this feature depending on your model  
Supports  
05. Picture Mode (Comman : d x)  
- To select the picture mode.  
Transmission  
[d][x][ ][Set ID][ ][Data][Cr]  
Model  
47WV30BS  
47WV30-BAAM  
47WV30-BAAL  
47WV30BR  
47WV30MS  
Data  
00: Vivid  
01: Standard  
02. Cinema  
03. Sport  
04: Game  
Data  
20H  
40H  
60H  
70H  
80H  
90H  
A0H  
x
o
o
o
o
o
o
o
o
o
o
o
o
o
Acknowledgement  
[j][ ][Set ID][ ][OK/NG][Data][x]  
RS-232 CONTROL 69  
09. Color (Command: k i)  
- To adjust screen color.  
06. Contrast (Command: k g)  
- To adjust screen contrast.  
* Only available for AV/ Component input.  
Transmission  
Transmission  
[k][g][ ][Set ID][ ][Data][Cr]  
[k][i][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00~64: Contrast 0~100  
00~64: Color 0~100  
Acknowledgement  
Acknowledgement  
[g][ ][Set ID][ ][OK/NG][Data][x]  
[i][ ][Set ID][ ][OK/NG][Data][x]  
10. Tint (Command: k j)  
- To adjust screen tint.  
07. Brightness (Command: k h)  
- To adjust screen brightness.  
* Only available for AV/ Component input.  
Transmission  
Transmission  
[k][h][ ][Set ID][ ][Data][Cr]  
[k][j][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00~64: Brightness 0~100  
00~64: Tint 0~100 (R50 ~ G50)  
Acknowledgement  
Acknowledgement  
[h][ ][Set ID][ ][OK/NG][Data][x]  
[j][ ][Set ID][ ][OK/NG][Data][x]  
08. Sharpness (Command: k k)  
- To adjust screen sharpness.  
11. Color Temperature (Command: x u)  
- To adjust color temperature.  
* Only available for AV/ Component input.  
Transmission  
Transmission  
[x][u][ ][Set ID][ ][Data][Cr]  
Data  
[k][k][ ][Set ID][ ][Data][Cr]  
00~64: Warm 50~Cool 50  
Data  
Acknowledgement  
00~64: Sharpness 0~100  
[u][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[k][ ][Set ID][ ][OK/NG][Data][x]  
70 RS-232 CONTROL  
12. H Position (Command: f q)  
- To set the Horizontal position.  
* Only available for Tile Off mode.  
15. Auto Configuration (Command: j u)  
- To adjust picture position and minimize image  
shaking automatically.  
* Only available for RGB input.  
Transmission  
Transmission  
[f][q][ ][Set ID][ ][Data][Cr]  
[j][u][ ][Set ID][ ][Data][Cr]  
Data  
00~64: Left 50 ~ Right 50  
Data  
01: Set  
Acknowledgement  
Acknowledgement  
[q][ ][Set ID][ ][OK/NG][Data][x]  
[u][ ][Set ID][ ][OK/NG][Data][x]  
13. V Position (Command: f r)  
- To set the Vertical position.  
* Only available for Tile Off mode.  
16. Balance (Command: k t)  
- To adjust sound balance.  
Transmission  
Transmission  
[k][t][ ][Set ID][ ][Data][Cr]  
[f][r][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00~64: Left 50~Right 50  
23~41: Bottom 15~Top 15  
Acknowledgement  
Acknowledgement  
[t][ ][Set ID][ ][OK/NG][Data][x]  
[r][ ][Set ID][ ][OK/NG][Data][x]  
14. H Size (Command: f s)  
- To set the Horizontal size.  
* Only available for Tile Off mode.  
17. Sound Mode (Comman : d y)  
- To select the sound mode.  
Transmission  
Transmission  
[d][y][ ][Set ID][ ][Data][Cr]  
[f][s][ ][Set ID][ ][Data][Cr]  
Data  
Data  
01: Standard  
02: Music  
03: Cinema  
04: Sport  
05. Game  
00~64: Size -50 ~ +50  
Acknowledgement  
[s][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[y][ ][Set ID][ ][OK/NG][Data][x]  
RS-232 CONTROL 71  
18. Treble (Command: k r)  
- To adjust treble.  
21. Volume Mute (Command: k e)  
- To select volume mute on/off.  
Transmission  
Transmission  
[k][r][ ][Set ID][ ][Data][Cr]  
[k][e][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00~64: Treble 0~100  
00: Volume mute on(volume off)  
01: Volume mute off(volume on)  
Acknowledgement  
Acknowledgement  
[r][ ][Set ID][ ][OK/NG][Data][x]  
[e][ ][Set ID][ ][OK/NG][Data][x]  
22. Volume Control (Command: k f)  
- To adjust volume.  
19. Bass (Command: k s)  
- To adjust bass.  
Transmission  
Transmission  
[k][f][ ][Set ID][ ][Data][Cr]  
[k][s][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00~64: Volume 0~100  
00~64: Bass 0~100  
Acknowledgement  
Acknowledgement  
[f][ ][Set ID][ ][OK/NG][Data][x]  
[s][ ][Set ID][ ][OK/NG][Data][x]  
23. Time 1(Year/ Month/ Day) (Command: f a)  
- To set the Time 1(Year/ Month/ Day values.  
20. Speaker (Command: d v)  
- To select speaker on/off.  
Transmission  
Transmission  
[f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
[d][v][ ][Set ID][ ][Data][Cr]  
Data1  
Data  
00~14: 2010 ~ 2030  
Data2  
00: Speaker Off  
01. Speaker On  
01~0C: January ~ December  
Data3  
01~1F: 1 ~ 31  
Acknowledgement  
[v][ ][Set ID][ ][OK/NG][Data][x]  
* Enter “fa [Set ID] ff” for checking Time 1 values.  
Acknowledgement  
[a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
72 RS-232 CONTROL  
24. Time 2(Hour/ Minute/ Second) (Command: f x)  
- To set the Time 2(Hour/ Minute/ S) values.  
26. On Timer(Repeat Mode/ Time) (Command: f d)  
- To set the On Timer(Repeat Mode/ Time) function.  
Transmission  
Transmission  
[f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
[f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
Data1  
Data1  
00~17: 00 ~ 23 hours  
00: Repeat Off  
Data2  
01: Repeat Once  
01~3B: 00 ~ 59 minutes  
02. Repeat Daily  
Data3  
03: Repeat from Monday to Friday  
04: Repeat from Monday to Saturday  
05: Repeat from Saturday to Sunday  
06. Repeat on Sunday  
01~3B: 00 ~ 59 seconds  
* Enter “fx [Set ID] ff” for checking Time 2 values.  
* This command won’t work if Time 1 has not been  
set in advance.  
Data2  
00~17: 00 ~ 23 Hours  
Data3  
00~3B: 00 ~ 59 Minutes  
Acknowledgement  
[x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
* Enter “fd [Set ID] ff” for checking On Timer(Repeat  
mode/ Time) values.  
* Check if Time1 and Time2 have been set before  
setting this function.  
* On Timer Input command should be executed  
followed just after executing this command to set On  
Timer schedule properly.  
Acknowledgement  
[d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
25. Off Timer(Repeat Mode/ Time) (Command: f e)  
- To set the Off Timer(Repeat Mode/ Time) function.  
Transmission  
[f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
Data1  
00: Repeat Off  
01: Repeat Once  
02. Repeat Daily  
03: Repeat from Monday to Friday  
04: Repeat from Monday to Saturday  
05: Repeat from Saturday to Sunday  
06. Repeat on Sunday  
Data2  
00~17: 00 ~ 23 Hours  
Data3  
00~3B: 00 ~ 59 Minutes  
* Enter “fe [Set ID] ff” for checking Off Timer(Repeat  
mode/ Time) values.  
* Check if Time1 and Time2 have been set before  
setting this function.  
Acknowledgement  
[e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
RS-232 CONTROL 73  
27. On Timer Input (Command: f u)  
- To set the On Timer Input function.  
28. Sleep Time (Command: f f)  
- To set sleep time.  
Transmission  
Transmission  
[f][u][ ][Set ID][ ][Data][Cr]  
[f][f][ ][Set ID][ ][Data][Cr]  
Data  
Data  
20: AV  
00: Off  
40: Component  
60. RGB  
70: DVI  
90: HDMI  
* Check if Time1, Time2, and On Timer(Repeat  
Mode/ Time) functions have been set before setting  
this function.  
* On Timer(Repeat Mode/ Time) command should  
be executed in advance this command to set On  
Timer schedule properly.  
01: 10min.  
02: 20min.  
03: 30min.  
04: 60min.  
05: 90min.  
06: 120min.  
07: 180min.  
08: 240min.  
Acknowledgement  
[f][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[u][ ][Set ID][ ][OK/NG][Data][x]  
Supports  
Model  
47WV30BS  
47WV30-BAAM  
47WV30-BAAL  
47WV30BR  
47WV30MS  
Data  
20H  
40H  
60H  
70H  
90H  
x
o
o
o
o
o
o
o
o
o
29. Power On Delay (Command: f h)  
- To set the schedule delay when the power is turned  
on(unit: second).  
Transmission  
[f][h][ ][Set ID][ ][Data][Cr]  
Data  
00~64: 0~100sec.  
Acknowledgement  
[h][ ][Set ID][ ][OK/NG][Data][x]  
30. Automatic Standby (Command: m n)  
- To set the Automatic Standby function  
Transmission  
[m][n][ ][Set ID][ ][Data][Cr]  
Data  
00: Off  
01: 4 Hours Off  
Acknowledgement  
[n][ ][Set ID][ ][OK/NG][Data][x]  
74 RS-232 CONTROL  
31. Auto Off (Command: f g)  
- To set the Auto Off function  
34. DPM Select (Command: f j)  
- To select DPM(Display Power Management) to  
save evergy.  
Transmission  
Transmission  
[f][g][ ][Set ID][ ][Data][Cr]  
[f][j][ ][Set ID][ ][Data][Cr]  
Data  
00: Auto Off Off  
01: Auto Off On  
Data  
00: DPM Off  
01: DPM On  
Acknowledgement  
Acknowledgement  
[g][ ][Set ID][ ][OK/NG][Data][x]  
[j][ ][Set ID][ ][OK/NG][Data][x]  
32. Language (Command: f i)  
- To set language for OSD.  
Transmission  
[f][i][ ][Set ID][ ][Data][Cr]  
Data  
00: Korean  
01: Chinese  
02: Japanese  
03: English  
04: French  
05: German  
06: Italian  
35. Fail Over Select (Command: m i)  
- To select Fail Over mode.  
* 47WV30-BAAL does not support Fail Over Select  
command.  
Transmission  
07: Portuguese  
08: Spanish(EU)  
09: Russian  
0A: Persian  
[m][i][ ][Set ID][ ][Data][Cr]  
Data  
00: Off  
01: Auto  
02: Manual  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
33. ISM Method (Command: j p)  
- To select ISM method for avoiding having a fixed  
image remain on screen.  
Transmission  
[j][p][ ][Set ID][ ][Data][Cr]  
Data  
01: Inversion  
02: Orbiter  
04: White Wash  
08. Normal  
Acknowledgement  
[p][ ][Set ID][ ][OK/NG][Data][x]  
RS-232 CONTROL 75  
36. Fail Over Input Select (Command: m j)  
- To select fail over mode.  
* Only available in Fail Over manual mode.  
* 47WV30-BAAL does not support Fail Over Select  
command.  
38. Tile mode (Command: d d)  
- To select a Tile Mode Off/ On and Tile Row/  
Column size.  
Transmission  
[d][d][ ][Set ID][ ][Data][Cr]  
Transmission  
Data  
[m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr]  
00 ~ FF: 1st byte - Tile Column value  
2nd byte - Tile Row value  
*00, 01, 10, 11 means Tile Mode Off.  
Data  
60: RGB  
70: DVI-D*  
90: HDMI*  
Acknowledgement  
[d][ ][Set ID][ ][OK/NG][Data][x]  
* Use 0x70 as data for DVI-D input, 0x90 as data for  
HDMI input, regardless their input lables.  
Acknowledgement  
[j][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
Data  
1~3(Priority 1~3)  
60: RGB  
70: DVI-D**  
90: HDMI**  
39. Tile Mode Check (Command: d z)  
- To check Tile Mode status.  
** Returns 0x70 as Data for DVI-D port, 0x90 as  
Data for HDMI port, regardless their input labels.  
Transmission  
[d][i][ ][Set ID][ ][Data][Cr]  
Data  
FF: Check Tile Mode status  
Acknowledgement  
[z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x]  
Data1  
00: Tile Mode Off  
01: Tile Mode On  
Data2  
01~0F: Tile Column Value  
Data3  
37. Reset (Command: f k)  
- To execute the Picture, Screen and Factory reset  
function,  
01~0F: Tile Row Value  
Transmission  
[f][k][ ][Set ID][ ][Data][Cr]  
Data  
00: Picture Reset  
01: Screen Reset  
02: Factory Reset  
03: Audio Reset  
40. Tile ID (Command: d i)  
- To set Tile ID.  
Acknowledgement  
Transmission  
[k][ ][Set ID][ ][OK/NG][Data][x]  
[d][i][ ][Set ID][ ][Data][Cr]  
Data  
01 ~ E1:Tile ID 01 ~ 225**  
FF: Read Tile ID  
** Data could not be set over (Tile Row) x (Tile  
Column)  
Acknowledgement  
[i][ ][Set ID][ ][OK/NG][Data][x]  
76 RS-232 CONTROL  
44. Natural Mode (in Tile Mode) (Comman : d j)  
- To assign the Tile Natural mode for Tiling function.  
41. Tile H Position (Command: d e)  
- To set the Horizontal position  
* Only available when Tile Mode On.  
Transmission  
Transmission  
[d][j][ ][Set ID][ ][Data][Cr]  
[d][e][ ][Set ID][ ][Data][Cr]  
Data  
00: Off  
01: On  
Data  
00~64: -50 ~ 50  
Acknowledgement  
Acknowledgement  
[j][ ][Set ID][ ][OK/NG][Data][x]  
[e][ ][Set ID][ ][OK/NG][Data][x]  
42. Tile V Position (Command: d f)  
- To set the Vertical Position.  
45. FAN Control (Command: d o)  
- To set Fan control on/off.  
* Only available when Tile Mode On.  
Transmission  
Transmission  
[d][o][ ][Set ID][ ][Data][Cr]  
[d][f][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00: Auto  
01: On  
23~41: -15 ~ 15 (for RGB)  
02: Manual  
Acknowledgement  
Acknowledgement  
[f][ ][Set ID][ ][OK/NG][Data][x]  
[o][ ][Set ID][ ][OK/NG][Data][x]  
43. Tile H Size (Command: d g)  
- To set the Horizontal size.  
46. FAN Fault Check (Command: d w)  
- To set Fan control on/off.  
* Only available when Tile Mode On.  
Transmission  
Transmission  
[d][w][ ][Set ID][ ][Data][Cr]  
[d][g][ ][Set ID][ ][Data][Cr]  
Data  
Data  
FF: Data should be always ff in hexadecimal.  
00~64: -50 ~ 50  
Acknowledgement  
Acknowledgement  
[w][ ][Set ID][ ][OK/NG][Data][x]  
[g][ ][Set ID][ ][OK/NG][Data][x]  
IR CODES 77  
50. Elapsed Time Return (Command: d l)  
47. Temperature Value (Command: d n)  
- To read the panel used time.  
- To read the inside temperature of the display.  
Transmission  
Transmission  
[d][l][ ][Set ID][ ][Data][Cr]  
[d][n][ ][Set ID][ ][Data][Cr]  
Data  
Data  
FF: Data should be always ff in hexadecimal.  
FF: Data should be always ff in hexadecimal.  
Acknowledgement  
Acknowledgement  
[l][ ][Set ID][ ][OK/NG][Data][x]  
[n][ ][Set ID][ ][OK/NG][Data][x]  
* Returned data means used hours in hexadecimal.  
48. Key (Command: m c)  
- To send IR remote control code.  
51. Serial No. Check (Command: f y)  
- To read the serial numbers.  
Transmission  
Transmission  
[m][c][ ][Set ID][ ][Data][Cr]  
[f][y][ ][Set ID][ ][Data][Cr]  
Data  
Data  
IR_KEY_CODE  
FF: Data should be always ff in hexadecimal.  
Acknowledgement  
Acknowledgement  
[c][ ][Set ID][ ][OK/NG][Data][x]  
[y][ ][Set ID][ ][OK/NG][Data][x]  
When display is in the standby mode, display will  
turn on by Power button of remote control only.  
49. OSD Select (Command: k l)  
- To select OSD(On Screen Display) on/off  
52. S/W Version (Command: f z)  
- To read the software version.  
Transmission  
Transmission  
[k][l][ ][Set ID][ ][Data][Cr]  
[f][z][ ][Set ID][ ][Data][Cr]  
Data  
Data  
00: OSD off  
01: OSD on  
FF: Data should be always ff in hexadecimal.  
Acknowledgement  
Acknowledgement  
[z][ ][Set ID][ ][OK/NG][Data][x]  
[l][ ][Set ID][ ][OK/NG][Data][x]  
78 IR CODES  
53. White Balance Red Gain (Command: j m)  
- To adjust white balance red gain.  
Transmission  
[j][m][ ][Set ID][ ][Data][Cr]  
Data 00~FE: Red gain 0~254  
Acknowledgement  
[z][ ][Set ID][ ][OK/NG][Data][x]  
54. White Balance Green Gain (Command: j n)  
- To adjust white balance green gain.  
Transmission  
[j][n][ ][Set ID][ ][Data][Cr]  
Data 00~FE: Green gain 0~254  
Acknowledgement  
[n][ ][Set ID][ ][OK/NG][Data][x]  
55. White Balance Blue Gain (Command: j o)  
- To adjust white balance blue gain.  
Transmission  
[j][o][ ][Set ID][ ][Data][Cr]  
Data 00~FE: Blue gain 0~254  
Acknowledgement  
[o][ ][Set ID][ ][OK/NG][Data][x]  
IR CODES 79  
IR CODE (Hex)  
Function  
Remark  
08  
C4  
C5  
95  
0B  
10  
11  
POWER  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
Remocon Botton  
MONITOR ON  
MONITOR OFF  
Evergy Saving  
INPUT  
Number 0  
Number 1  
12  
13  
14  
15  
16  
17  
18  
19  
02  
03  
E0  
E1  
79  
4D  
09  
43  
99  
40  
41  
06  
07  
44  
28  
7B  
5B  
72  
71  
63  
61  
B1  
B0  
BA  
8F  
8E  
Number 2  
Number 3  
Number 4  
Number 5  
Number 6  
Number 7  
Number 8  
Number 9  
VOL+  
VOL-  
BRIGHTNESS (Page Up)  
BRIGHTNESS (Page Down)  
ARC (MARK)  
PSM  
MUTE  
MENU  
AUTO  
>
<
OK  
BACK  
TILE  
EXIT  
ID ON(Red)  
ID OFF(Green)  
Yellow  
Blue  
ll  
◄◄  
►►  
To obtain the source code under GPL, LGPL,  
MPL and other open source licenses, that is  
contained in this product, please visit http://  
opensource.lge.com.  
In addition to the source code, all referred  
license terms, warranty disclaimers and  
copyright notices are available for download.  
LG Electronics will also provide open source  
code to you on CD-ROM for a charge covering  
the cost of performing such distribution (such  
as the cost of media, shipping and handling)  
upon email request to [email protected].  
This offer is valid for three (3) years from the  
date on which you purchased the product.  
NOTE  
y ENERGY STAR(EPA) can not be supported  
in 47WV30-BAAL model.  
ENERGY STAR(EPA)  
support  
47WV30MS  
47WV30BR  
o
o
o
o
x
Make sure to read the Safety Precautions  
before using the product.  
47WV30BS  
Keep the Owner's Manual(CD) in an  
accessible place for future reference.  
The model and serial number of the SET is  
located on the back and one side of the SET.  
Record it below should you ever need service.  
47WV30-BAAM  
47WV30-BAAL  
MODEL  
SERIAL  
Temporary noise is normal when powering ON or  
OFF this device.  

Intel KM4M User Manual
JVC LCT2574 001A H User Manual
KitchenAid Cooktop Kdrs505xss01 User Manual
LG Electronics LG Life Good Computer Monitor M2380DB User Manual
Marshall electronic V R84DP 2SDI User Manual
Philips 20PT1422 User Manual
Philips 190S7FG User Manual
Philips BDS4622R User Manual
Philips PET1008 User Manual
Philips PSC 605 User Manual