KitchenAid KGCC505H User Manual 1

®
Gas Built-in Cooktop  
PRODUCT MODEL NUMBERS  
OVERALL DIMENSIONS  
KGCC505H  
KGCC566H  
KGCR055G  
KGCS105G  
KGCS127G  
KGCS166G  
KGCT055G  
KGCT305G  
KGCT365G  
KGCT366G  
30"  
(76.2 cm)  
15"  
(38.1 cm)  
30" (76.2 cm)  
21"  
KGCV566M  
(53.3 cm)  
15" (38.1 cm)  
21"  
(53.3 cm)  
2-7/8"  
(7.3 cm)  
2-7/8"  
(7.3 cm)  
Gas supply: Cooktop is equipped for use with  
NATURAL gas (except model KGCR055 - L.P. gas  
only). Cooktop can be converted to L.P. gas. Gas  
supply line of 3/4" rigid pipe to cooktop location. If  
local codes permit, a new AGA or CSA design-  
certified, 4-5 foot (1.2-1.5 m) long, 1/2" or 3/4"  
I.D., flexible metal appliance connector is  
recommended for connecting cooktop to gas  
supply line. Pressure regulator has 3/8" female  
pipe threads. The supply line shall be equipped  
with an approved shutoff valve.  
36"  
(91.4 cm)  
36" (91.4 cm)  
21"  
(53.3 cm)  
2-7/8"  
(7.3 cm)  
Electrical: 120-volt, 60 Hz, AC-only, 15 amp.  
electrical supply. Use copper wire only. A time-  
delay fuse or circuit breaker and separate circuit is  
recommended.  
43"  
(109.2 cm)  
42" (106.7 cm)  
Grommet is required for electrical cable or power  
supply cord hole cut in a metal cabinet.  
21"  
(53.3 cm)  
2-7/8"  
(7.3 cm)  
CABINET OPENING DIMENSIONS  
13" (33 cm)  
recommended  
upper cabinet  
depth  
Illustration dimensions  
combustible area  
above countertop  
Cooktop width  
min.  
18" (45.7 cm) min.  
clearance upper  
cabinet to countertop  
within minimum  
15"  
13-3/4"  
19"  
15"  
2-1/8"  
2-7/8"  
5-5/8"  
(38.1 cm) (34.9 cm) (48.3 cm) (38.1 cm) (5.4 cm) (7.3 cm) (14.3 cm)  
30"  
29"  
19"  
30"  
2-1/8"  
2-7/8"  
5-5/8"  
clearances to cooktop  
(76.2 cm) (73.7 cm) (48.3 cm) (76.2 cm) (5.4 cm) (7.3 cm) (14.3 cm)  
See NOTE*  
for minimum  
clearances.  
36" 35-1/4" 19" 36" 2-1/8" 2-7/8" 5-5/8"  
(91.4 cm) (89.5 cm) (48.3 cm) (91.4 cm) (5.4 cm) (7.3 cm) (14.3 cm)  
42"  
42-3/4"  
19"  
42"  
2-1/8"  
2-7/8"  
11-1/2"  
(106.7 cm) (108.6 cm) (48.3 cm) (106.7 cm) (5.4 cm) (7.3 cm) (28.4 cm)  
Minimum distance  
to combustible  
Important note on base cabinet construction:  
surface above  
countertop  
After making the countertop cutout, some  
installations may require notching down the base  
cabinet side walls to clear the burner box. To  
avoid this modification, use a base cabinet having  
sidewalls wider the cutout.  
Do not seal cooktop  
to countertop.  
24" (61 cm) min. –  
deep countertop is  
required.  
Note: 24" (61 cm) min. clearance if bottom of wood or metal  
*
cabinet is protected by not less than 1/4" (0.6 cm) flame  
retardant millboard covered with not less than No. 28 MSG sheet  
steel, 0.015" (0.04 cm) stainless steel, or 0.024"(0.06 cm)  
aluminum or 0.020" (0.05 cm) copper.  
Gounded outlet –  
Locate within 24"  
(61 cm) of right rear  
corner of cutout.  
Gas line opening –  
Wall: anywhere 5" (12.7 cm) below  
underside of countertop.  
Cabinet floor: anywhere within 6" (15.2 cm)  
of rear wall is recommended.  
30" (76.2 cm) min. clearance between top of cooking platform  
and bottom of unprotected wood or metal cabinet.  
Because Whirlpool Corporation policy includes a continuous commitment to improve  
our products, we reserve the right to change materials and specifications without notice.  
Dimensions are for planning purposes only. For complete details, see Installation  
Instructions packed with product. Specifications subject to change without notice.  
Ref. 4455834 Rev. A  
05-12-04  

Hy Tek Manufacturing Tek Panel 320 User Manual
Indesit KP900CX User Manual
InFocus Computer Monitor INF55WIN8 User Manual
JVC PD 35DX PD 42DX User Manual
KitchenAid KECC507KSS1 User Manual
Lenovo ThinkCentre 7357 User Manual
Lucent Technologies Telephone Call Handling Back Panels_ Front Panels 4424D+ User Manual
Magnavox MT1331B3 User Manual
NEC MultiSync EA261WM BK User Manual
Philips CD190 User Manual