JVC CU VD3U User Manual

ENGLISH  
FRANÇAIS  
ESPAÑOL  
CU-VD3U  
DVD Burner  
INSTRUCTIONS  
Graveur de DVD  
MANUEL D'UTILISATION  
Grabador de DVD  
MANUAL DE INSTRUCCIONES  
For Customer Use:  
Enter the Model No. and Serial  
No. (located on the bottom of the  
burner) below. Retain this  
information for future reference.  
Model No.  
Serial No.  
Safety Precautions for the Burner  
Cleaning Procedure  
Be sure to observe the following precautions. Failing to  
do so may result in electric shock, fire, injury, or  
malfunction.  
IMPORTANT:  
Be sure to unplug the burner before beginning  
cleaning.  
Do not use liquid or aerosol cleaners.  
Ensure that no moisture or liquid comes into contact  
with the drive during cleaning.  
Do not disassemble, dismantle, or modify the  
equipment. Requests for repair and inspection should  
be made to the dealer.  
Do not insert metal or combustible objects or pour  
water or other liquids inside the burner.  
Exterior of the Burner:  
Wipe dirt off with a dry cloth.  
EN  
FR  
ES  
Turn off the power when connecting equipment.  
Remove the plug when the burner will not be used for  
a prolonged time or prior to cleaning (electricity flows  
through the equipment even when the power is off).  
Do not block the ventilation holes of the burner.  
Do not use where there is condensation. Suddenly  
carrying the burner from a cold location to a hot  
location may result in the formation of drops, which  
may cause a malfunction or failure.  
Disc Tray:  
Wipe off dirt with a soft dry  
cloth.  
Do not touch the lens.  
To clean the lens, use  
Lens  
commercially available lens  
cleaning blower for cameras.  
Using a lens cleaning disc will  
cause malfunction.  
Do not cause the burner to vibrate when discs are in.  
Safety Precautions for Accessories  
Disc:  
When using the AC adapter, the power cord, and the  
USB cable, be sure to observe the following  
precautions. Failing to do so may result in electric  
shock, fire, injury, or malfunction.  
Gently wipe from the inner edge to the outer edge with  
a soft cloth.  
Storage:  
Make sure that discs are kept in their cases. If discs are  
piled on top of one another without their protective  
cases, they can be damaged. Do not put discs in a  
location where they may be exposed to direct sunlight,  
or in a place where the humidity or temperature is high.  
Avoid leaving discs in your car!  
Do not insert or remove the plug when your hands  
are wet.  
Fully insert the plug into the outlet.  
Keep dust and metal objects away from the plug.  
Do not damage the cord.  
Place the cord where it will not trip someone up.  
Do not use when thunder can be heard.  
Do not dismantle.  
Region Codes  
Do not use for any product other than this one.  
Do not play the provided CD-ROM with an audio  
player. Doing so may damage the circuits or speakers.  
Region codes are numbers for restricting DVD video  
playback. The world is separated into six regions and  
each region is identified by a number. If the number for  
a disc does not match the number for the player, the  
disc cannot be played on the player.  
Safety Precautions for Discs  
Do not use the following discs.  
Cracked discs  
Changing the region codes  
Deeply scratched discs  
You can change the region code to play a DVD that  
has a different code. (The code cannot be changed for  
some playback software.) When you insert the disc,  
the Caution screen appears on the PC. Follow the on-  
screen instructions to change the code.  
Installation  
Do not install in any of the following locations.  
Humid location  
Location of 60 °C or above  
Location subject to direct sunlight  
Location where overheating is likely  
Dusty or smoky locations  
Locations subject to oily smoke or steam such as a  
kitchen counter or beside a humidifier  
Unstable location  
The region code for the burner can be changed  
5 times only. The code set the fifth time becomes the  
final code, so be sure to set a frequently used code.  
Take sufficient care when changing the code.  
Disclaimer  
Bathroom  
JVC accepts no liability whatsoever for loss of data  
resulting from inappropriate connections or handling.  
Dusty places  
Slanted location  
Copyrights  
ATTENTION:  
On placing the unit:  
Some TVs or other appliances generate strong  
magnetic fields. Do not place such appliances on top  
of the unit as it may cause picture disturbance.  
Duplicating copyright protected material, for other than  
personal use, without the permission of the copyright  
holder is prohibited by copyright law.  
Registered Trademarks and  
Trademarks  
When moving the product:  
Remove the power cord and all connecting cables.  
Other company and product names mentioned herein  
are registered trademarks and/or trademarks of their  
respective holders.  
3
Basic Guide  
Getting ready to copy to a DVD!  
Get ready a recommended disc  
A
Use DVD-R, DVD-RW or DVD-R DL disc of the brands listed below.  
DVD+R, DVD+RW and DVD-RAM cannot be used.  
DVD-R  
DVD-RW  
DVD-R DL (Single-sided double layer)  
JVC, Verbatim  
JVC, TDK, Verbatim, JVC  
SONY  
Brand  
Caution  
z Use a commercially available cleaning cloth to wipe the disc gently if there are any  
fingerprints or dirt. Applying too much strength will result in scratches.  
z Do not use discs that are scratched.  
z DVD-R DL discs can be used only when the burner is connected to a high definition  
Everio camera.  
Connect  
B
The power lamp lights  
in green.  
Use the AC adapter to  
power on the Everio  
camera.  
CU-VD3  
To DC jack  
Power input  
To DC jack  
USB extension cable  
Everio camera  
USB cable  
Use if necessary.  
Important!  
z When the DVD created on this burner cannot be played on other devices, play  
back using this burner. (A P. 8)  
z If you encounter any problems, refer to “Troubleshooting”. (A P. 15)  
z Follow the instructions in the instruction manual of the Everio camera when  
connecting and operating the Everio camera.  
4
 
Open the tray and insert the disc  
C
1) Press the eject  
button.  
2) Pull out completely.  
3) Insert firmly into place.  
Close the tray  
Push in until the tray  
Open the LCD monitor  
The Everio camera turns on.  
D
E
snaps in.  
Turn the Everio off and on  
again if the following display  
remains unchanged.  
Pay attention to the followings!  
zDo not topple  
zDo not subject to  
mechanical shock  
zDo not touch the  
recording side  
zDo not place any  
objects on top  
¹Recording and playback may not function properly if the disc is  
scratched or dirty.  
To copy images to DVD  
A P. 8f13  
Preparations  
completed!  
To play back copied images  
A P. 8  
5
Contents  
zSafety Precautions .................................................................................................. 2  
zBasic Guide.............................................................................................................. 4  
zGetting Started......................................................................................................... 7  
Taking out the USB Cable....................................................................................... 7  
Placing the Burner................................................................................................... 7  
zCopying to DVD ....................................................................................................... 8  
3 Copy Options........................................................................................................ 8  
Playing Back Copied Images................................................................................... 8  
Copying All Files to the DVD ................................................................................... 9  
Copying by Date.................................................................................................... 10  
Copying by Event .................................................................................................. 12  
Creating Data DVD from a PC (Optional).............................................................. 14  
zTroubleshooting .................................................................................................... 15  
zSpecifications ........................................................................................................ 17  
Accessories  
If there are any items missing, please consult your authorized dealer.  
AC adapter  
(AP-V3U)  
Power cord  
USB extension cable  
Instruction manual  
(this manual), other printed  
material  
Stand  
DVD-R (blank disc)  
z Use the AC adapter, power cord and USB extension cable supplied with  
this burner. Using accessories other than those supplied may result in  
electric shock or fire.  
Caution  
6
Getting Started  
Taking out the USB Cable  
Hook the protruding tip with your finger and  
pull it towards you  
A
B
EN  
FR  
ES  
Take out the USB cable  
Can be connected to the USB extension cable.  
Placing the Burner  
o Horizontal orientation  
Take note of the top and bottom of the burner and place it in  
the horizontal orientation.  
¹Do not place any objects on top of the burner.  
o Vertical orientation  
Face the feet side towards the left and fix securely on the stand.  
Feet  
Back  
Low side  
Arrow  
High side  
Front  
7
     
Copying to DVD  
3 Copy Options  
o Copying All Files to the DVD ....................................................................P. 9  
o Copying by Date ........................................................................................P. 10  
o Copying by Event ......................................................................................P. 12  
Playing Back Copied Images  
To AV jack  
AV cable  
(supplied with Everio)  
USB cable  
To USB jack  
Use the AC adapter to  
power on the Everio  
camera.  
To Audio/Video input  
terminals  
Access lamp  
Connect as shown above and turn on  
each device  
<Everio LCD monitor screen>  
A
CREATE DVD  
CREATE TOGETHER  
The screen on the right appears on the  
Everio camera.  
SELECT AND CREATE  
CREATE DUPLICATE  
PLAYBACK  
Switch the TV to an appropriate input  
Select “PLAYBACK” and press  
B
C
PLAYBACK CREATED DISC  
Playback begins automatically.  
To stop, select o using the touch sensor.  
Select with  
touch sensor  
Note  
z When opening/closing the disc tray or during  
copying/playback, the access lamp lights or blinks  
in orange.  
8
     
Copying All Files to the DVD  
z If the operation and display of your Everio camera differs from the following  
procedures, refer to the instruction manual of your Everio camera.  
z For some Everio cameras, still images cannot be copied.  
Caution  
Connect CU-VD3 to the Everio camera according to the procedures on  
EN  
FR  
ES  
Preparations  
P. 4f5 and turn on the Everio camera.  
Press the [DIRECT DVD] button  
A
Select with  
touch sensor  
[DIRECT DVD]  
Select “EXECUTE” and press  
B
C
<Everio LCD monitor screen>  
UNSAVED SCENES  
READY TO CREATE  
DVD-R  
EXECUTE  
RETURN  
QUIT  
The “CREATING NOW” screen  
appears and copying starts  
CREATING NOW  
ELAPSED:  
30%  
3 min  
To cancel, select “STOP” and press  
.
Do not turn off the power or remove the  
USB cable while the “CREATING NOW”  
screen is displayed.  
STOP  
When “COMPLETED” appears,  
D
press  
to complete copying  
COMPLETED  
OK  
9
 
Copying by Date  
z If the operation and display of your Everio camera differs from the following  
procedures, refer to the instruction manual of your Everio camera.  
z For some Everio cameras, still images cannot be copied.  
Caution  
Connect CU-VD3 to the Everio camera according to the procedures on  
P. 4f5.  
Preparations  
The screen in step A appears when the Everio camera is turned on.  
Display the “CREATE DVD” screen,  
select “SELECT AND CREATE” and  
press  
A
<Everio LCD monitor screen>  
CREATE DVD  
CREATE TOGETHER  
SELECT AND CREATE  
CREATE DUPLICATE  
PLAYBACK  
SELECT AND CREATE  
Select “CREATE BY DATE” and  
press  
B
C
D
SELECT AND CREATE  
CREATE BY DATE  
CREATE BY EVENT  
CREATE BY PLAYLIST  
SELECT FROM SCENES  
CREATE DISC BY DATE  
Select the desired dates and  
press  
CREATE BY DATE  
OCT.12.2008  
OCT.11.2008  
TOTAL  
00h18m  
DVD1  
QUIT  
Select “ALL” and press  
DVD CREATION LIST  
ALL  
DVD1  
CHECK  
QUIT  
10  
 
Select “EXECUTE” and press  
E
F
ALL  
READY TO CREATE  
DVD-R  
EXECUTE  
RETURN  
EN  
FR  
ES  
QUIT  
The “CREATING NOW” screen  
appears and copying starts  
CREATING NOW  
ELAPSED:  
30%  
3 min  
To cancel, select “STOP” and press  
.
Do not turn off the power or remove the  
USB cable while the “CREATING NOW”  
screen is displayed.  
STOP  
When “COMPLETED” appears,  
G
press  
to complete copying  
COMPLETED  
OK  
11  
Copying by Event  
z If the operation and display of your Everio camera differs from the following  
procedures, refer to the instruction manual of your Everio camera.  
z For some Everio cameras, still images cannot be copied.  
Caution  
Register images to events beforehand.  
Preparations  
For details, refer to the instruction manual of the Everio camera.  
Connect CU-VD3 to the Everio camera according to the procedures on  
P. 4f5.  
The screen in step A appears when the Everio camera is turned on.  
Display the “CREATE DVD” screen,  
select “SELECT AND CREATE” and  
press  
A
<Everio LCD monitor screen>  
CREATE DVD  
CREATE TOGETHER  
SELECT AND CREATE  
CREATE DUPLICATE  
PLAYBACK  
SELECT AND CREATE  
Select “CREATE BY EVENT” and  
press  
B
C
D
SELECT AND CREATE  
CREATE BY DATE  
CREATE BY EVENT  
CREATE BY PLAYLIST  
SELECT FROM SCENES  
CREATE DISC BY EVENT  
Select the desired events and  
press  
SEARCH EVENT  
SON 1  
QUIT  
Select “ALL” and press  
DVD CREATION LIST  
ALL  
DVD1  
DVD2  
DVD3  
CHECK  
QUIT  
12  
 
Select “EXECUTE” and press  
E
F
ALL  
READY TO CREATE  
DVD-R  
EXECUTE  
RETURN  
EN  
FR  
ES  
QUIT  
The “CREATING NOW” screen  
appears and copying starts  
CREATING NOW  
ELAPSED:  
30%  
3 min  
To cancel, select “STOP” and press  
.
Do not turn off the power or remove the  
USB cable while the “CREATING NOW”  
screen is displayed.  
STOP  
When “COMPLETED” appears,  
G
press  
to complete copying  
COMPLETED  
OK  
13  
C
Optional  
Creating Data DVD from a PC  
Important!  
o The following optional accessories are required:  
z Specialized USB cable (QAM1092-001)  
Please purchase from the JVC Accessory Store at:  
z Disc writing software (Power2Go)  
Please purchase from the CyberLink homepage.  
This burner can be used as a DVD burner by connecting it to a PC. Data DVD can be  
created by using the disc writing software (sold separately).  
Power cord  
USB  
Power supply outlet  
CU-VD3  
PC  
AC adapter  
USB cable  
Specialized USB cable  
(sold separately)  
¹ During connection, switch off the power supply of CU-VD3.  
CU-VD3 is turned on by inserting the AC adapter into the power supply outlet.  
Note  
z The supplied USB extension cable cannot be used.  
14  
 
Troubleshooting  
Trouble  
Action  
CU-VD3  
EN  
FR  
ES  
z Make sure the AC adapter and power cord are connected  
properly.  
Cannot turn the power  
on.  
z This is not a malfunction.  
z If the burner is abnormally hot, remove the AC adapter and  
consult your authorized dealer.  
The burner and AC  
adapter is hot.  
z A disc cannot be ejected by pressing the eject button if data  
is being written to the disc. Wait until writing finishes.  
z If a disc cannot be ejected with the eject button:  
Remove and insert the AC adapter, then press the eject  
button again.  
If the disc cannot be ejected using the above method,  
remove the AC adapter and all other connections. Insert a  
thin rod of about 5 cm into the force eject hole located on  
the right side of the eject button. The disc tray will be  
ejected for about 1 cm, pull out the disc tray manually and  
take out the disc.  
Cannot open the disc  
tray.  
z Insert the disc with the label facing up.  
z Make sure the disc tray is not dirty.  
z Make sure the writing surface of the disc is not damaged.  
z Make sure the special-shaped discs are not used.  
z Make sure the audio CD complies with the CD-DA standard.  
(Copy-control CDs cannot be played.)  
Reading fails.  
z For CD-R or CD-RW, make sure it is not recorded using the  
packet-write method.  
z Make sure an appropriate disc is being used. (A P. 4, 17)  
z Use discs recommended for the burner. (A P. 4, 17)  
z Make sure that a new disc is used for DVD-R.  
z Insert the disc with the label facing up.  
Writing fails.  
z Make sure the disc tray is not dirty.  
z Make sure the writing surface of the disc is not damaged.  
z Make sure the special-shaped discs are not used.  
z The time taken for writing may be longer depending on the  
usage environment and conditions of usage. This is not a  
malfunction. It is the performance of this burner.  
The writing time is too  
long.  
15  
 
Trouble  
Everio  
Action  
z Make sure the USB cable is connected properly.  
z Remove and insert the USB cable again.  
z Remove and insert the AC adapter of CU-VD3.  
Cannot be recognized  
by the Everio camera.  
z Turn off CU-VD3 and the Everio camera, and then turn on  
again.  
Problems occur  
during operation.  
Unable to play DVD  
video created on this  
burner on other DVD  
players.  
z Connect CU-VD3 to the Everio camera and play back using  
the playback function of the Everio camera. (Refer to the  
instruction manual of the Everio camera.)  
It is impossible to dub  
the DVD discs, which  
were written with this  
burner, on a HDD-DVD  
recorder.  
z Connect CU-VD3 to the Everio camera, play back using the  
playback function of the camera, and dub the DVD discs  
with the DVD recorder. (Refer to the instruction manual of  
the Everio camera.)  
Trouble  
PC  
Action  
z If the packet writing software, DLA (Direct Letter Access),  
has been installed on the PC, the disc may not be played  
back properly due to incompatibility.  
In this case, consult the DLA software developer or check  
out “DLA” related websites for solutions.  
Cannot play back.  
z Confirm the region code and change the region code of  
CU-VD3.  
z The DVD video created on this burner is region free (“ALL”).  
z Follow the instructions on the PC screen to change the  
region code.  
Region code cannot  
be changed.  
(The code cannot be changed for some playback software.)  
The region code of CU-VD3 can be changed up to 5 times.  
The region code cannot be changed anymore as the code is  
finalized after changing the fifth time.  
16  
Specifications  
General  
AC adapter (AP-V3U)  
Rated current  
0.9 A  
AC110 V to 240 V  
50 Hz/60 Hz  
Power supply  
141 x 23 x 166  
(5-3/5" x 9/10" x 6-1/2")  
Approx. 380 g (0.84 lbs)  
(Excluding AC adapter and  
USB extension cable)  
Dimensions(mm)  
(W x H x D)  
EN  
FR  
ES  
Input capacity  
Output  
0.26 A  
DC 5.2 V, 2 A  
Weight  
0 °C to 40 °C  
(32 °F to 104 °F)  
Operating  
temperature  
Operating temperature:  
5 °C to 35 °C (41 °F to 95 °F)  
Storing temperature:  
-20 °C to 60 °C  
49 x 28 x 79  
(1-9/10" x 1-1/10" x 3-1/10")  
(Excluding power cord)  
Dimensions (mm)  
(W x H x D)  
Operating  
environment  
Weight  
Approx. 136 g (0.3 lbs)  
(-4 °F to 140 °F)  
For DVD:  
661 nm, 0.4 mW  
For CD:  
Laser power  
(wavelength,  
output)  
785 nm, 0.6 mW  
Recommended discs  
JVC, TDK, Verbatim, SONY  
JVC, Verbatim  
JVC  
*1 DVD-R DL discs can be used when the  
burner is connected to a high definition  
Everio camera or a PC.  
DVD-R  
*1  
DVD-R DL  
*2  
DVD-RW  
*2 Dual layer DVD-RW discs cannot be used.  
z Optimal performance of the burner may not be possible depending on the disc used. Using discs  
of manufacturers for which compatibility has been confirmed is recommended.  
z Only 12 cm discs can be used with this burner.  
When connected to an Everio camera  
Interface  
USB 2.0  
Interface cable  
USB extension cable  
Compatible discs for Everio  
writing  
:
:
DVD-R, DVD-RW  
High definition  
DVD-R, DVD-R DL, DVD-RW  
(8 cm discs cannot  
be used)  
Everio  
Everio  
:
:
DVD video (video only)  
Recording format  
Recording time  
High definition  
Everio  
Data DVD (video, still image)  
Everio  
:
Approx. 30 minutes (including time taken for finalization)  
z Approx. 90 minutes of video recorded in fine mode on a  
4.7 GB disc. (Varies depending on conditions such as  
number of titles.)  
High definition  
Everio  
:
For details, refer to the instruction manual of the Everio  
camera.  
¹ Compatible with all 2006, 2007 and 2008 Everio G models excluding GZ-MG21 & GZ-MG31 for  
direct burning without PC as of December 2007. Updated information is available at  
17  
 
Memo  
Memo  
Printed in Malaysia  
1207MNH-SW-VM  
© 2007 Victor Company of Japan, Limited  

IBM Data Capture Board CLC CAPT PCASM User Manual
Intel 520 120 Gb 2 5&quot; Internal Solid State Drive SSDSC2BW120A301 User Manual
Intel BX80605I7880 User Manual
JVC AV 28MS1SN User Manual
LOREX Technology SG19LD User Manual
Mabe Canada CLEAN MODELS SELF CLEAN SELF CLEAN JCBS280 User Manual
Palsonic 3430GM User Manual
Panasonic MICROCOMPUTER MN103S User Manual
Panasonic TC 51PM10Z User Manual
Philips 190VW8FB User Manual