SBC-776
Full-sized Intel FC-370 Pentium III CPU
Card with Intel 815E chipset, Dual LAN,
Audio, SCSI, LCD & 4 USB.
Acknowledgments
All other product names or trademarks are properties of their
respective owners.
AMD is a trademark of Advanced Micro Devices, Inc.
AMI is a trademark of American Megatrends, Inc.
Award is a trademark of Award Software International, Inc.
IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
Intel and Pentium III are trademarks of Intel Corporation.
Microsoft Windows® is a registered trademark of Microsoft Corp.
SMC is a trademark of Standard Microsystems Corporation.RTL is
a trademark of Realtek Semi-Conductor Co., Ltd.
C&T is a trademark of Chips and Technologies, Inc.
UMC is a trademark of United Microelectronics Corporation.
ITE is a trademark of Integrated Technology Express, Inc.
SiS is a trademark of Silicon Integrated Systems Corp.
VIA is a trademark of VIA Technology, Inc.
A Message to the Customer
AAEON Customer Services
Each and every AAEON product is built to the most exacting
specifications to ensure reliable performance in the harsh and
demanding conditions typical of industrial environments. Whether
your new AAEON equipment is destined for the laboratory or the
factory floor, you can be assured that your product will provide the
reliability and ease of operation for which the name AAEON has
come to be known.
Your satisfaction is our primary concern. Here is a guide to
AAEON's customer services. To ensure you get the full benefit of
our services, please follow the instructions below carefully.
Technical Support
We want you to get the maximum performance from your products.
So if you run into technical difficulties, we are here to help. For the
most frequently asked questions, you can easily find answers in
your product documentation. These answers are normally a lot
more detailed than the ones we can give over the phone.
So please consult this manual first. If you still cannot find the
answer, gather all the information or questions that apply to your
problem, and with the product close at hand, call your dealer. Our
dealers are well trained and ready to give you the support you need
to get the most from your AAEON products. In fact, most problems
reported are minor and are able to be easily solved over the phone.
In addition, free technical support is available from AAEON
engineers every business day. We are always ready to give advice
on application requirements or specific information on the installa-
tion and operation of any of our products.
Product Warranty
AAEON warrants to you, the original purchaser, that each of its
products will be free from defects in materials and workmanship for
two years from the date of shipment.
This warranty does not apply to any products which have been
repaired or altered by persons other than repair personnel autho-
rized by AAEON, or which have been subject to misuse, abuse,
accident or improper installation. AAEON assumes no liability
under the terms of this warranty as a consequence of such events.
Because of AAEON's high quality-control standards and rigorous
testing, most of our customers never need to use our repair service.
If an AAEON product is defective, it will be repaired or replaced at
no charge during the warranty period. For out-of-warranty repairs,
you will be billed according to the cost of replacement materials,
service time, and freight. Please consult your dealer for more
details.
If you think you have a defective product, follow these steps:
1. Collect all the information about the problem encountered. (For
example, CPU type and speed, AAEON products used, other
hardware and software used, etc.) Note anything abnormal and
list any on-screen messages you get when the problem occurs.
2. Call your dealer and describe the problem. Please have your
manual, product, and any helpful information readily available.
3. If your product is diagnosed as defective, obtain an RMA
(return material authorization) number from your dealer. This
allows us to process your return more quickly.
4. Carefully pack the defective product, a fully-completed Repair
and Replacement Order Card and a photocopy proof of pur-
chase date (such as your sales receipt) in a shippable container.
A product returned without proof of the purchase date is not
eligible for warranty service.
5. Write the RMA number visibly on the outside of the package
and ship it prepaid to your dealer.
Packing list
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 SBC-776 Half- size Single Board Computer Card
• 1 Quick Installation Guide
• 1 Support CD contains the followings:
-- User's Manual (this manual in PDF file)
-- Ethernet driver and utilities
-- VGA driver and utilities
-- Audio driver and utilities
• 1 floppy disk drive interface cable (34-pin, pitch 2.0mm)
• 1 IDE hard disk drive cable (40-pin, pitch 2.54mm)
• 1 parallel port (26-25-pin, pitch 2.0mm) and serial port (10-9 pin,
pitch 2.0mm) adapter kit.
• 1 bag of screws and miscellaneous parts
If any of these items are missing or damaged, contact your distribu-
tor or sales representative immediately.
Notice
Dear Customer,
Thank you for purchasing the SBC-776 board. This user's
manual is designed to help you to get the most out of the SBC-776,
please read it thoroughly before you install and use the board. The
product that you have purchased comes with an two-year limited
warranty, but AAEON will not be responsible for misuse of the
product. Therefore, we strongly urge you to first read the manual
before using the product.
To receive the latest version of the user manual, please visit our
Web site at:
Http:\\WWW.AAEON.COM
http://www.aaeon.com
Contents
Chapter 1: General Information.........................................1
Introduction.......................................................2
Features.................................................................................... 3
Specifications ........................................................................... 4
Board layout ............................................................................. 7
Board dimensions ..................................................................... 8
Chapter 2: Installation .......................................................... 9
Safety Precautions...........................................................10
Removing the CPU..................................................10
Installing the CPU............................................................... 11
Installing SDRAM...................................................12
Jumpers..............................................................13
Connectors ..............................................................................14
Locating Jumpers and Connectors............................................15
Mechanical Drawing................................................17
VGA or AGP VGA Header Select (JP1).................................19
Clear CMOS (JP2) .................................................................19
Watchdog Timer (JP3) ............................................................20
COM2 RS-232/422/485 Setting (JP4)......................................21
DiskOnChip Address Select (JP5).................................... ..22
Function Select Header (JP6) .................................................24
CPU/DIMM Speed Select Header (JP7) ...............................25
LCD Panel's Voltage Setting (JP8) ....................................... 27
COM2 RS-232/422/485 Setting (JP4) .....................................28
LCD or VGA Enable Header (JP10) .....................................29
VGA Connector (CN6)...........................................................29
IDE Hard Drive Connector (CN7) .........................................30
USB Connector (CN9, CN10)...............................31
Audio Connector (CN11) ........................................................32
Floppy Drive Connector (CN12).........................................33
PS/2 Keyboard and Mouse Connector(CN13) .......................33
Parallel Port Connector (CN14)..............................................34
COM1 & COM2 Serial Port (CN15, CN16)..........................35
SCSI Connector (CN21) .........................................................36
100Base-Tx Fast Ethernet Connector (CN22, CN20)............37
ATX Power Connector (CN23)..............................38
Speaker/BuzzerConnector (CN24)..........................38
Fan Power Connector (CN25, CN26, CN27)...........................39
LCD Backlight Power Connector (CN28)...............40
TFT LCD Panel Connector (CN29)......................40
PS/2 Keyboard Header (CN31)............................41
PS/2 Mouse Header (CN32)................................41
Chapter 3: Award BIOS Setup...........................................42
Starting setup..................................................................43
Setup keys.......................................................................44
Getting help ......................................................................... 45
Main setup menu .....................................................................46
Standard CMOS setup ............................................................48
Advanced BIOS features........................................................53
Advanced CHIPSET features ................................................58
Integrated Peripherals...............................................61
Power management setup .......................................................67
PNP/PCI congfiguration setup................................................72
PC Health Status......................................................74
Frequency/Voltage Control........................................75
Load Fail-Safe Defaults............................................76
Load Optimized Defaults..........................................77
Set Supervisor Password.......................................78
Set User Password...............................................79
Save and Exit Setup............................................80
Exit
&
Save......................................................81
Chapter 4: Drivers and Utilities .......................................82
Installing Drivers Attention Notice....................................83
Software Installation Utilities........................................85
Intel 82562ET LAN Driver............................................86
Advansys 38C0800 SCSI Driver............................................89
Intel 82559ER LAN Driver...........................................91
VGA Driver...............................................................93
Ultra ATA Storage Driver................................................94
Audio
Driver............................................................95
1
General
I n fo r m a t io n
This chapter gives background
information of the mainboard.
Sections Include:
• Board Specifications
• Layout and Dimensions
Introduction
The SBC-776 is an all-in-one Single Board Computer (SBC) capable
of handling the Intel Celeron 300~766MHz (with system bus
frequencies of 66MHz) and Pentium III 500~850 MHz (with system
bus frequencies of 100MHz). Reliability, performance, flexibility are
essential qualities for SBC's and SBC-776 offers all of these.
Onboard is the versatile Intel 815E chipset, controlling LAN, LCD,
and AUDIO. The VGA has a display memory size of 4 MB, with
resolutions up to 1024 x 768 at 256K. Ethernet connections can be
easily carried out through two RJ-45 connectors.
This full-sized SBC supports M-Systems DiskOnChip 2000 family
of flash disk products that are small, plug and play, solid state disks
in a standard 32-pin DIP package with capabilities ranging from
8MB to 288MB. There are also three 168-pin DIMM sockets
providing a maximum of 512MB. A compact flash connector is
provided on the solder side of the board.
The additional Advansys ASC38C0800, Ultra II Wide SCSI coordi-
nates up to 15 devices that are simultaneously connected to your
mainboard. Connection with the onboard chipset is made through
a 68-pin SCSI connector.
SBC-776 supports two IDE devices, two floppy disks, four USB
ports, two serial ports that can be configured as COM1, COM2,
COM3 and COM4. The single bidirectional parallel port can
support SPP, ECP and EPP modes. The standard ATX power
connector enables this full-sized SBC to be operated without any
backplane if necessary.
2
SBC-776 User Manual
Features
• Supports Intel Celeron /Pentium III FC-370 CPUs
• High Speed AGP 2X for VGA function onboard
(Intel 815E built in)
• Two 10/100 Base-T Fast Ethernet (Intel 815 E built in and Intel 82559ER)
• Supports H/W status monitoring
• Integrated AC-97 2.1 SoundBlaster compatible PCI 3D Audio
• Onboard Intel 815E controller supports 18/36-bit TFT panel
• Supports Compact Flash Memory
• Four USB ports onboard
• Two COM ports onboard
• Ultra II Wide SCSI interface onboard
• Supports DiskOnChip
Chapter 1 General Information
3
Specifications
Standard LPX-size SBC functions
• CPU: FC-370 Pentium III (Coppermine), Celeron, and compatible CPUs
(With system bus frequencies of 66/100/133MHz).
• CPU socket: Intel Socket 370
• Bus interface: PICMG Compliant
• BIOS: Award 4 MB Flash BIOS
• Chipset: Intel 815E
• I/O chipset: Winbond W83627HF. Fully 16-bit I/O decoded
• ISA bus interface: Winbond W83626 LPC to ISA bridge Full ISA bus
function except master mode support
• Memory : Onboard three 168 pins DIMM socket supports up to
512Mbytes SDRAM (PC-133 SDRAM supported).
• Enhanced IDE: Supports two IDE channel. Support Ultra DMA/ 100
mode with data transfer rate of 100MB/sec.
• FDD interface: Supports two floppy disk drives, 5.25" (360KB and
1.2MB) and/or 3.5" (720KB, 1.44MB, and 2.88MB).
• Parallel port: One bi-directional parallel ports. Supports SPP, ECP, and
EPP modes.
• Serial port: One RS-232 and one RS-232/422/485 serial port. Ports can be
configured as COM1, COM2, COM3, COM4, or disabled individually
and of which one and be configured as RS-232/422/485 (COM2).
(16C550 equivalent).
• KB/Mouse connector : 6-pin mini-DIN connector supports PC/AT
keyboard and PS/2 mouse and wake on KBD function.
• USB connectors: 10-pin onboard connector supports four USB ports.
• Battery: Lithium battery for data retention
• Watchdog timer: Can generate a system reset, IRQ15, or NMI.
Software selectable time-out interval (1 sec. ~ 255 min., 1 sec./step or
1 min./step)
• DMA: 7 DMA channels (8237 equivalent)
4
SBC-776 User Manual
• Interrupt: 15 interrupt levels (8259 equivalent)
• Power management: Supports ATX power supply. I/O peripheral
support power saving and doze/standby/suspend modes. APM 1.2
compliant.
• H/W status monitoring: Embedded in W83267HF supports power,
supply voltages, and temperature monitoring.
Flat Panel/CRT Interface
• Chipset: embedded In Intel 815E
• Chipset output VGA signal: AGP 4X
• Display memory: Share system memory 4MB SDRAM (Max)
• Display type: Supports non-interlaced CRT and up to 18/36 bit LCD (TFT,
LCD, only). Can display both CRT and Flat Panel simultaneously.
• Resolution: Up to 1024 x 768 @ 256 K colors
Audio Interface
•Chipset: Intel 815E
• Audio interface: One 14 pin header (2.00mm)
• Codec: ALC 200
Ethernet Interface
• Chipset: Intel 815E embedded in ICH2 and Intel 82559ER
• Ethernet interface : 82559ER does not support WOL and AOL
82562ET support WOL and do not support AOL
82562EM support WOL and AOL. 776 offers 82559ER and 82562 ET on
board.
Compact Flash socket onboard
• Compact flash connector onboard support type 2 CFD
Chapter 1 General Information
5
Ultra Wide II SCSI Interface
• Chipset: AdvanSys ASC38C0800
• Connector: 68-pin internal
• Termination: Auto termination
SSD Interface
• One 32-pin DIP socket supports M-Systems DiskOnChip 2000 series
Mechanical and environmental
• Power supply voltage: ATX power supply
• Operating temperature: 32 to 140o F (0 to 60o C)
• Board size: 13.3"(L) x 4.8"(W) (338mm x 122mm)
• Weight: 1.2 lb. (0.3 Kg)
6
SBC-776 User Manual
Board Layout
CN24
JP7
CN2
CN3
CN4
JP10
JP1
CN7
CN5
CN12
JP2
JP8
CN28
CN29
CN9
CN30
CN10
7 7 F 3 - 9 8 A W
n d b n o i
W
JP5
CN33
JP9
JP3
JP4
CN21
CN11
CN32
Chapter 1 General Information
7
Board Dimensions
A
7 F - 3 9 8 7 W
o b n n d i
W
8
SBC-776 User Manual
2
Installation
This chapter describes how to set up the
main board hardware, including instruc-
tions on setting jumpers and connecting
peripherals, switches, and indicators. Be
sure to read all the safety precautions
before you begin the installation proce-
dure.
SBC-776
Safety precautions
Warning! Always completely disconnect the power cord from
your chassis whenever you are working on it. Do
not make connections while the power is on
because sensitive electronic components can be
damaged by the sudden rush of power.Only
experienced electronics personnel should open the
PC chassis.
Caution! Always ground yourself to remove any static charge
before touching the CPU card. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface
or in a static-shielded bag when they are not in the
chassis.
Removing the CPU
The SBC-776 all-in-one CPU module supports most Pentium III/
Celeron or 586 CPUs. The system's performance depends on the
CPU you choose. You can install or upgrade the CPU in the board's
PGA socket by following the procedures outlined below. If your
system has an existing CPU, you need to remove it before installing
the new CPU.
Removing a CPU
1. Disconnect power from the chassis, and unplug all connections
to the CPU card. Then, remove the CPU card from the chassis
by following the instructions in the user's manual for your
chassis.
2. Lift the CPU out of the PGA socket. The old chip may be
difficult to remove. You may find spray chip lubricant, designed
for pin-grid-array (PGA) devices, and a chip puller helpful.
These are available at electronics hobbyists' supply stores.
1 0
SBC-776 ManualBC-599/596
Installing A CPU
To install the CPU, follow the instructions that came with it. If no
documentation was provided, the general procedures for installing
a CPU are outlined below:
1. Lubricate the pins on the CPU with lubricant for PGA devices.
This makes the CPU slide in much easier and greatly reduces
the chance of damaging the pins and other components.
2. Carefully align the CPU so that it is parallel to the socket. Make
sure that the notch on the corner of the CPU matches the notch
on the inside of the socket.
3. Gently push the CPU into the socket. There will probably be a
small gap between the CPU and the socket even when it is fully
seated. DO NOT USE EXCESSIVE FORCE!
When you install a new CPU, you may have to adjust other
settings on the board, such as CPU type, CPU clock, and PCI
speed, to accommodate it. Make sure that the settings are correct
for your CPU. Improper settings may damage the CPU.
SBC-776 Chapter 2 11
SBC-776
Installing DRAM (DIMMs)
System Memory
The SBC-776 contains three sockets for 168-pin dual inline memory
module (DIMM). The socket uses 3.3 V unbuffered synchronous
DRAM (SDRAM). DIMM is available in capacities of 16, 32, 64, 128
or 256 MB. The socket can be filled in the DIMM of any size,
giving your SBC-776 single board computer between 16 and 512
MB of memory.
Supplementary information about DIMM
SBC-776 can accept PC-133 SDRAM DIMM Module(with or
without parity).
Single-sided modules are typically 16 or 64 MB; double-sided
modules are usually 32, 128 or 256 MB.
Memory Installation Procedures
To install DIMM, first make sure the two handles of the DIMM
socket are in the "open" position. i.e. The handles remain outward.
Slowly slide the DIMM module along the plastic guides on both
ends of the socket. Then press the DIMM module right down into
the socket, until you hear a click. This is when the two handles
have automatically locked the memory module into the correct
position of the DIMM socket. (See Figure below) To take away the
memory module, just push both handles outward, and the memory
module will be ejected by the mechanism in the socket.
1 2
SBC-776 ManualBC-599/596
Jumpers
Jumpers
Function
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
JP9
JP10
VGA or AGP VGA Select Header
Clear CMOS Selection
Watchdog Function Select
RS-232/422/485 COM 2 Setting
DiskOnChip Address Selection
Function Select
CPU/DIMM Speed Select
LCD Panel's Voltage Setting
RS-232/422/485 COM2 Setting
LCD or VGA Enable Header
SBC-776 Chapter 2 13
SBC-776
Connectors
Connector
Function
CN2,3,4
SDRAM Slot
CN5
AGP Slot
CN6
VGA Connector
CN7
Primary IDE Connector
Compact Flash
CN8
CN9,10
CN11
CN12
CN13
CN14
CN15
CN16
CN20,22
CN21
USB Dual Port Header
Audio Connector
Floppy Drive Connector
PS/2 Keyboard and Mouse Connector
Parallel Port Connector
COM 1 Serial Port
COM 2 Serial Port
LAN RJ-45 Connector
SCSI Connector
CN23
CN24
ATX Power Supply
Speaker/Buzzer
CN25
CN26
CN27
CN28
CN29
CN31
CN32
System FAN 1 Connector
CPU Fan Connector
System FAN 2 Connector
LCD Backlight Power Connector
TFT LCD Panel Connector
PS/2 Keyboard Header
PS/2 Mouse Header
1 4
SBC-776 ManualBC-599/596
Locating Jumpers and Connectors
CN24
JP7
CN2
CN3
CN4
JP10
JP1
CN7
CN5
CN12
JP2
JP8
CN28
CN29
CN9
CN30
CN10
7 7 F 3 - 9 8 A W
n d b n o i
W
JP5
CN33
JP9
JP3
JP4
CN21
CN11
CN32
SBC-776 Chapter 2 15
SBC-776
Locating Jumpers and Connectors
CN8
1 6
Mechanical Drawing
A
7 F - 3 9 8 7 W
o b n n d i
W
SBC-776 Chapter 2 17
SBC-776
Mechanical Drawing
1 8
SBC-776 ManualBC-599/596
VGA or AGP VGA Header Select (JP 1)
Select AGP VGA
1
3
2
4
5
6
7
8
9
11
13
10
12
14
Select on board VGA
1
3
2
4
5
6
7
8
9
11
13
10
12
14
Clear CMOS (JP2)
You can use JP2 to clear the CMOS data if necessary. To reset the
CMOS data, place a jumper on JP2 for just a few seconds, then
remove the jumper.
Clear CMOS (J2P)
Clear CMOS
Protect*
1 2 3
1 2 3
JP2
*default
SBC-776 Chapter 2 19
SBC-776
Watchdog Timer Function Select (JP3)
The mainboard is equipped with a watchdog timer that resets the CPU
or generates an interrupt if processing comes to a standstill for whatever
reason. This feature ensures system reliability in industrial stand-alone
and unmanned environments.
Reset
1
3
5
2
4
6
IRQ15
1
2
3
5
4
6
NMI
1
2
3
5
4
6
2 0
SBC-776 ManualBC-599/596
RS-232/ 422/ 485 COM 2 (JP4 & JP9) Setting
The SBC-776 COM 2 serial port can be selected as RS-232/422/485 by
setting JP4.
*RS-232
3 6 9 12
2 4 6
1 3 5
1 4 7 10
*RS-485
3 6 9 12
1 4 7 10
2 4 6
1 3 5
*RS-422
3 6 9 12
2 4 6
1 3 5
1 4 7 10
SBC-776 Chapter 2 21
SBC-776
DiskOnChip Address Selection (JP5)
The DiskOnChip 2000 occupies an 8 Kbyte window in the upper
memory address range of C800 to D400. You should ensure this
does not conflict with any other device's memory address. JP5
controls the memory address of the Flash Disk.
*D400H
1 3 5
2 4 6
*DC00H
1 3 5
2 4 6
*CE00H
1 3 5
2 4 6
*D000H
1 3 5
2 4 6
2 2
SBC-776 ManualBC-599/596
*E000H
1 3 5
2 4 6
*DOC Disable
1 3 5
2 4 6
*D800H
*C800H
1 3 5
2 4 6
1 3 5
2 4 6
These addresses might conflict with the ROM BIOS of
other
peripheral boards, Please select the appropriate memory
address to avoid memory conflicts.
SBC-776 Chapter 2 23
SBC-776
Function Select Header (JP 6)
Next you may want to install external switches to monitor and
control the mainboard. These features are completely optional —
install them only if you need them. The front panel connector (JP6)
is an 16-pin male, dual in-line header and provides connections for
a speaker, hard disk access indicator and an input switch for
resetting the card.
Speaker
The mainboard can drive an 8Ω external speaker at 0.5 watts. If
there is no external speaker, the SBC-776 provides an onboard
buzzer as an alternative.
LED interfa ce
The front panel LED indicator for hard disk access is an active low
signal (24 mA sink rate).
1
3
5
2
4
6
Power Button
Reset Switch
Suspend Switch
Hard Disk LED
7
8
9
11
13
10 Power LED
12 Supend LED
14 SCSI LED
15
16 Chassis Open Detected
2 4
SBC-776 ManualBC-599/596
CPU/ DIMM Speed Select Header (JP 7)
CPU/133
DIMM/133
1
3
5
7
2
4
6
8
CPU/133
DIMM/100
1
3
5
7
2
4
6
8
CPU/100
DIMM/100
1
3
5
7
2
4
6
8
CPU/66
DIMM/100
1
3
5
7
2
4
6
8
SBC-776 Chapter 2 25
SBC-776
Auto Detect
Default
1
3
5
7
2
4
6
8
2 6
SBC-776 ManualBC-599/596
LCD Panel’s Voltage Setting (JP 8)
*LCD Panel power: +5V; Backlight power: +5V
1 3 5
2 4 6
*LCD Panel power: +5V; Backlight power: +12V
1 3 5
2 4 6
*LCD Panel power: +3.3V; Backlight power: +5V
1 3 5
2 4 6
*LCD Panel power: +3.3V; Backlight power: +12V
1 3 5
2 4 6
SBC-776 Chapter 2 27
SBC-776
LCD or VGA Ena ble Hea der (JP10)
* Default VGA
Dual Display
1 3 5
1
3
5
6
VGA Enable
VGA/LCD Enable
LCD 1PIXS/CLK
LCD 2PIXS/CLK
2 4
2
4
6
VGA conne ctor (CN6)
The mainboard's PCI SVGA interface can drive conventional CRT
displays and is capable of driving a wide range of flat panel
displays, including electroluminescent (EL), gas plasma, passive
LCD, and active LCD displays. The board has two connectors to
support these displays, one for standard CRT VGA monitors and
one for flat panel displays.
VGA display connector (CN6)
CN6 is a 15-pin, dual-in-line header used for conventional CRT
displays. A simple one-to-one adapter can be used to match CN6 to
a standard 15-pin D-SUB connector commonly used for VGA.
VGA display connector (CN6)
Pin
1
Signal
RED
Pin
9
Signal
VCC
2
GREEN
10
GND
3
4
5
6
7
8
BLUE
N/C
11
12
13
14
15
16
N/C
DDDA
H-SYNC
V-SYNC
DDCK
N/C
GND
GND
GND
GND
2 8
SBC-776 ManualBC-599/596
I DE Ha rd Drive Con n e ct or (CN7 )
IDE hard drive connector (CN7)
Pin
Signal
Pin
Signal
1
IDE RESET
2
GND
3
DATA 7
4
DATA 8
DATA 9
DATA 10
DATA 11
DATA 12
DATA 13
DATA 14
DATA 15
N/C
5
DATA 6
6
7
DATA 5
8
9
DATA 4
10
12
14
16
18
20
22
24
26
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
DATA 3
DATA 2
DATA 1
DATA 0
SIGNAL GND
IDEPDREQR
IO WRITE
IO READ
GND
GND
GND
IO CHANNEL READY 28
GND
IDEPDACKX
IRQ14
30
32
34
36
38
40
42
44
GND
IOCS16
P66DET
ADDR 2
HARD DISK SELECT 1
MGND
ADDR 1
ADDR 0
HARD DISK SELECT 0
IDE ACTIVE
VCC
VCC
GND
N/C
SBC-776 Chapter 2 29
SBC-776
USB connector (CN9, CN10)
The SBC-776 provides two USB (Universal Serial Bus) interfaces,
which give complete plug and play, hot attach/detach for up to 127
external devices. The USB interfaces comply with USB specifica-
tion Rev. 1.0, and can be disabled in the system BIOS setup.
USB connector (CN9)
Pin
Function
Pin
Function
1
VCC
2
GND
3
5
7
9
USBD0-
4
6
GND
UDBD0+
GND
USBD1+
8
USBD1-
GND
10
VCC
USB connector (CN10)
Pin
Function
Pin
Function
1
VCC
2
GND
3
5
7
9
USBD2-
4
6
GND
USBD2+
GND
USBD3+
USBD3-
VCC
8
GND
10
3 0
SBC-776 ManualBC-599/596
Audio Conne ctor (CN11)
On board SBC-776, there is a 14-pin header for audio capability.
The pin definition is provided below.
Audio connector (CN 11)
Pin
1
3
Signal
MIC IN
GND
Pin
2
4
Signal
MIC VCC
CD IN GND
CD IN L I/P
5
LINE IN L
6
7
LINE IN R
GND
8
CD N GND
CD IN R I/P
LINE OUT R
GND
9
10
12
14
11
13
LINE OUT L
GND
SBC-776 Chapter 2 31
SBC-776
Floppy Drive Connector (CN12)
Floppy drive connector (CN12)
Pin
1
Signal
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
Pin
2
Signal
DENSITY SELECT
3
4
N/C
5
6
DRIVE TYPE
INDEX
7
8
9
10
12
14
16
18
20
22
24
26
28
30
32
34
MOTOR 0
11
13
15
17
19
21
23
25
27
29
31
33
DRIVE SELECT 1
DRIVE SELECT 2
MOTOR 1
DIRECTION
STEP
WRITE DATA
WRITE GATE
TRACK 0
WRITE PROTECT
READ DATA
HEAD DELECT
DISK CHANGE
PS/ 2 Keyboa rd a nd Mouse Connector (CN13)
On board SBC-776, there is a standard 6-pin header for PS/2
keyboard and mouse connector. The pin definition is provided
below.
Keyboard and mouse connector (CN 13)
Pin
1
3
Signal
KB DATA
GND
Pin
2
4
Signal
MS DATA
VCC
5
KB CLOCK
6
MS CLOCK
3 2
SBC-776 ManualBC-599/596
Pa ra llel port connector (CN14)
Normally, the parallel port is used to connect the board to a printer.
The SBC-776 includes an onboard parallel port, accessed through
CN14, a 26-pin flat-cable connector. A traditional DB-25 connector
cable is needed to install the printer to the board. The cable has a
26-pin connector on one end and a DB-25 connector on the other.
Parallel port IRQ
The onboard parallel port is designated as LPT1 and can be
disabled or changed to LPT2 or LPT3 in the system BIOS setup.
Parallel port connector table (CN14)
Parallel port connector (CN14)
Pin
1
Signal
Pin
2
Signal
D0
/STB
D1
3
4
D2
5
D3
6
D4
7
D5
8
D6
9
D7
10
12
14
16
18
20
22
24
26
/ACK
11
13
15
17
19
21
23
25
BUSY
SLCT
/ERR
/SLCTINI
PE
/AUTOFD
/INIT
GND
GND
GND
GND
N/C
GND
GND
GND
GND
SBC-776 Chapter 2 33
SBC-776
COM 1 (CN 15) & COM 2 (CN 16) Seria l Ports
On board offer four set serial ports for serial devices connection.
Two of them are the D-Sub type, pin definition show as below, for
another two, please refer to page ?.
COM 1 RS-232 (CN15)
Pin
1
2
Signal
Pin
6
7
Signal
SDCDB1X
SRXDB1
STXDB1
SDSRB1X
SRTSB1X
SCTSB1X
3
8
4
5
SDTRB1X
GND
9
SRIB1X
NC
10
COM 1 RS-232 (CN16)
Pin
1
2
Signal
SDCDB2X
SRXDB2
Pin
6
7
Signal
SDSRB2X
SRTSB2X
3
4
5
STXDB2
SDTRB2X
GND
8
SCTSB2X
SRIB2X
NC
9
10
3 4
SBC-776 ManualBC-599/596
SCSI -2
68-PinConnector (CN 21)
SBC-776 has a 68 pin connector for the Ultra 2 SCSI connection.
Please pay attention when connecting the SCSI device, because
you must determine the last device on the SCSI chain.
PIN
1
2
3
4
5
6
7
8
FUNCTION
SD+12
SD+13
SD+14
SD+15
SDP+1
SD+0
SD+1
SD+2
SD+3
SD+4
SD+5
SD+6
SD+7
SDP + 0
GND
PIN
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
FUNCTION
SD-12
SD-13
SD-14
SD-15
SDP-1
SD-0
SD-1
SD-2
SD-3
SD-4
SD-5
SD-6
SD-7
SDP - 0
GND
SENIN
TPWEX
TPWEX
NC
GND
SATN-
GND
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
DIFS
TPWEX
TPWEX
NC
GND
SATN+
GND
SBSY+
SACK+
SRST+
SMSG+
SSEL+
SCD +
SREQ+
SIO+
SBSY-
SACK-
SRST-
SMSG-
SSEL-
SCD-
SREQ-
SIO-
SD-8
SD+8
SD+9
SD+10
SD+11
SD-9
SD-10
SD-11
SBC-776 Chapter 2 35
SBC-776
100Ba se-Tx LAN connector (CN22,20)
On board supports one standard RJ-45 connector for enthernet
connection. The RJ-45 connector has two LED indicators. Both
LED displays indicate the speed of information being processed,
however the Lan speed does vary.
* The on board Intel 82559XX fast ethernet controller supports
10Mb/s and 100Mb/s N-way auto-negotiation operation.
Green LED: 100M LAN speed
Yellow LED: 10M LAN speed
100Base-Tx Ethernet connector (CN22)
Pin
1
2
Signal
Tx+
TX-
Pin
5
6
Sig
N/C
RX-
3
4
RX+
N/C
7
8
N/C
N/C
Green LED: 100M LAN speed
Yellow LED: 10M LAN speed
100Base-Tx Ethernet connector (CN20)
Pin
1
2
Signal
Tx+
TX-
Pin
5
6
Sig
N/C
RX-
3
4
RX+
N/C
7
8
N/C
N/C
3 6
SBC-776 ManualBC-599/596
Pow e r conne ctor (CN23)
ATX power connector (CN23)
The ATX power supply uses 20-pin connector shown below. Make
sure you plug in the right direction.
ATX power connector (CN23)
Pin
Signal
Pin
Signal
1
+3.3V
11
+3.3V
2
+3.3V
GND
12
13
14
15
16
17
18
19
20
-12V
3
GND
POWER ON
GND
GND
GND
-5V
4
+5V
5
GND
6
+5 V
7
GND
8
POWER OK
+5VSB
+12V
9
+5V
10
+5V
Spea ker/ Buzzer (CN 24)
You can choose to use the internal buzzer on the SBC-776 baord, or
you may use your own external speaker.
Speaker/ Buzzer (CN24)
Speaker
On Board Buzzer
3 4
1 2 3 4
1
2
CN24
SBC-776 Chapter 2 37
SBC-776
Fa n pow er connectors (CN25, 26, 27)
CPU fan pow er connector (CN 26)
Plug in the fan cable to the 3-pin fan connector onboard. The fan
connector is marked CN26.
CPU fan power connector (CN26)
Pin
Signal
1
GND
2
3
+12V
Fan speed sensor
System fan 1 connector (CN 25)
Pin
Signal
1
GND
2
3
+12V
Fan speed sensor
System fan 2 connector (CN27)
Pin
1
Signal
GND
2
+12V
3
Fan speed sensor
3 8
SBC-776 ManualBC-599/596
LCD Ba cklight Pow er Connector (CN 28)
LCD Backlight Power Connector (CN 28)
Pin
1
2
Signal
BLKVCC
GND
TFT LCD pa nel connector (CN 29)
LCD panel connector (CN 29)
Pin
1
3
5
7
Signal
BLKVCC
GND
LDCVCC
ENAVEE
P0
Pin
2
4
6
8
Signal
BLKVCC
GND
LCDVCC
GND
P1
9
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
P2
P4
P6
P8
P10
P12
P14
P16
P18
P20
P22
P24
SHFCLK
DE
GND
P26
P28
P30
P3
P5
P7
P9
P11
P13
P15
P17
P19
P21
P23
P25
VSYNC
HSYNC
FPBLEN
P27
P29
P31
P32
P33
49
P34
50
P35
SBC-776 Chapter 2 39
SBC-776
PS/ 2 Keyboa rd Hea der (CN31)
Onboard there is a 5-pin header for keybaord connection, the pin
definition is provided below.
PS/2 Keyboard Header (CN 31)
Pin
1
3
Signal
KB CLOCK
NC
Pin
2
4
Signal
KB DATA
GND
5
VCC
PS/ 2 Mouse Hea der (CN 32)
Onboard there is a 4-pin header for keyboard connection, the pin
definition is provided below.
PS/2 Mouse Header (CN 32)
Pin
1
3
Signal
MS CLOCK
GND
Pin
2
4
Signal
MS DATA
VCC
4 0
SBC-776 ManualBC-599/596
3
Award BIOS Setup
This chapter describes how to configure
the BIOS for the system.
42 SBC-776 User Manual
Starting setup
The Award BIOS is immediately activated when you first turn on
the computer. The BIOS reads system configuration information in
CMOS RAM and begins the process of checking out the system
and configuring it through the power-on self test (POST).
When these preliminaries are finished, the BIOS seeks an operating
system on one of the data storage devices (hard drive, floppy drive,
etc.). The BIOS launches the operating system and hands control of
system operations to it.
During POST, you can start the Setup program in one of two ways:
1.By pressing Del immediately after switching the system on, or
2.By pressing Del or pressing Ctrl-Alt-Esc when the following
message appears briefly at the bottom of the screen during POST:
TO ENTER SETUP BEFORE BOOT PRESS DEL KEY
If the message disappears before you respond and you still wish to
enter Setup, restart the system to try again by turning it OFF then
ON or pressing the RESET button on the system case. You may
also restart by simultaneously pressing Ctr-Alt-Del. If you do not
press the keys at the correct time and the system does not boot, an
error message appears and you are again asked to
PRESS F1 TO CONTINUE, DEL TO ENTER SETUP
Chapter 3 Award BIOS Setup 43
Setup keys
These keys helps you navigate in Award BIOS:
Up arrow
Down arrow
Left arrow
Right arrow
Esc
Move to previous item
Move to next item
Move to the item in the left hand
Move to the item in the right hand
Main Menu: Quit and not save changes into
CMOS RAM
Other pages: Exit current page and return to
Main Menu
PgUP/+
PgDn/-
F1
Increase the numeric value or make
changes
Decrease the numeric value or make
changes
General help, only for Status Page Setup
Menu and Option Page Setup Menu
F2
F3
F4
F5
Item Help
Reserved
Reserved
Restore the previous CMOS value from
CMOS, only for Option Page Setup Menu
Load the default CMOS RAM value from
BIOS default table, only for Option Page
Setup Menu
F6
F7
F8
Load the default
Reserved
F9
Reserved
F10
Save all the CMOS changes, only for Main
Menu
44 SBC-776 User Manual
Getting help
Press F1 to pop up a small help window that describes the appro-
priate keys to use and the possible selections for the highlighted
item. To exit the Help Window press Esc or the F1 key again.
In Ca se of Proble m s
If, after making and saving system changes with Setup, you
discover that your computer no longer is able to boot, the Award
BIOS supports an override to the CMOS settings that resets your
system to its default configuration.
You can invoke this override by immediately pressing Insert; when
you restart your computer. You can restart by either using the ON/
OFF switch, the RESET button or by pressing Ctrl-Alt-Delete.
The best advice is to alter only settings that you thoroughly
understand. In particular, do not change settings in the Chipset
screen without a good reason. The Chipset defaults have been
carefully chosen by Award Software or your system manufacturer
for the best performance and reliability. Even a seemingly small
change to the Chipset setup may cause the system to become
unstable.
Chapter 3 Award BIOS Setup 45
Main Setup Menu
Standard CMOS Features
Use this menu for basic system configuration. (Date, time, IDE,
etc.)
Advanced BIOS Features
Use this menu to set the advanced features available on your
system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and
optimize your system’s performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
(Primary slave, secondary slave, keyboard, mouse etc.)
Power Management Setup
Use this menu to specify your settings for power management.
(HDD power down, power on by ring, KB wake up, etc.)
46 SBC-776 User Manual
PnP/PCI Configuration
This entry appears is your system supports PnP/PCI.
PC Health Status
This menu allows you to set the shutdown temperature for your
system.
Frequency/Voltage Control
Use this menu to specify your settings for frequency/ voltage
control.
Load Fail-Safe Defaults
Use this menu to load the BIOS default values for the minimal/
stable performance for your system to operate.
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory
settings for optimal performance system operations. While
AWARD has designated the custom BIOS to maximize perfor-
mance, the factory has the right to change these defaults to meet
their needs.
Set Supervisor/User Password
Use this menu to set User and Supervisor Passwords.
Save and Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
Chapter 3 Award BIOS Setup 47
Standard CMOS Features
This standard setup menu allows users to configure system
components such as the date, time, hard disk drive, floppy drive,
display, and memory. Online help for each field can be accessed
by pressing F1.
Date and Time Configuration
The BIOS determines the day of the week from the other date
information. This field is for information only.
Press the left or right arrow key to move to the desired field (date,
month, year). Press the PgUp/- or PgDn/+ key to increment the
setting, or type the desired value into the field.
The time format is based on the 24-hour military-time clock. For
example, 1 p.m. is 13:00:00 hours. Press the left or right arrow key
to move to the desired field. Press the PgUp/- or PgDn/+ key to
increment the setting, or type the desired value into the field.
HARD DISKS
The BIOS supports up to four IDE drives. This section does not
show information about other IDE devices, such as a CD-ROM
drive, or about other hard drive types, such as SCSI drives.
NOTE: We recommend that you select type AUTO for all drives.
48 SBC-776 User Manual
The BIOS can automatically detect the specifications and optimal
operating mode of almost all IDE hard drives. When you select
type AUTO for a hard drive, the BIOS detects its specifications
If you do not want to select drive type AUTO, other methods of
selecting the drive type are available:
1.Match the specifications of your installed IDE hard drive(s) with
the preprogrammed values for drive types 1 through 45.
2.Select USER and enter values into each drive parameter field.
3.Use the IDE HDD AUTO DETECTION function in Setup.
Here is a brief explanation of drive specifications:
Type: The BIOS contains a table of predefined drive types. Each
defined drive type has a specified number of cylinders,
number of heads, write precompensation factor, landing
zone, and number of sectors. Drives whose specifications
do not accommodate any predefined type are classified as
type USER.
Size: Disk drive capacity (approximate). Note that this size is
usually slightly greater than the size of a formatted disk
given by a disk-checking program.
Cyls: Number of cylinders
Head: Number of heads
Precomp: Write precompensation cylinder
Landz: Landing zone
Sector: Number of sectors
Mode: Auto, Normal, Large, or LBA
- Auto: The BIOS automatically determines the optimal mode.
- Normal: Maximum number of cylinders, heads, and sectors
supported are 1024, 16, and 63.
- Large: For drives that do not support LBA and have more
than 1024 cylinders.
Chapter 3 Award BIOS Setup 49
- LBA (Logical Block Addressing): During drive access, the
IDE controller transforms the data address described by
sector, head, and cylinder number into a physical block address,
significantly improving data transfer rates. For drives with greater
than 1024 cylinders.
Drive A
Drive B
Select the correct specifications for the diskette drive(s) installed in
the computer.
None
No diskette drive installed
360K, 5.25 in
5-1/4 inch PC-type standard drive;
360 kilobyte capacity
1.2M, 5.25 in
5-1/4 inch AT-type high-density
drive; 1.2 megabyte capacity
720K, 3.5 in
3-1/2 inch double-sided drive;
720 kilobyte capacity
1.44M, 3.5 in
3-1/2 inch double-sided drive;
1.44 mega byte capacity
2.88M, 3.5 in
3-1/2 inch double-sided drive;
2.88 mega byte capacity
Video
Select the type of primary video subsystem in your computer. The
BIOS usually detects the correct video type automatically. The
BIOS supports a secondary video subsystem, but you do not select
it in Setup.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array.
For EGA, VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40 Color Graphics Adapter, power up in 40 column mode
CGA 80 Color Graphics Adapter, power up in 80 column mode
MONO
Monochromoe adapter, includes high resolution
monochrome adapters
50 SBC-776 User Manual
Halt On
During the power-on-self-test (POST), the computer stops if the
BIOS detects a hardware error. You can tell the BIOS to ignore
certain errors during POST and continue the boot-up process.
These are the selections:
No errors: POST does not stop for any errors.
All errors If: the BIOS detects any nonfatal error, POST
stops and prompts you to take corrective action.
All, But Keyboard: POST does not stop for a keyboard
error, but stops for all other errors
All, But Diskette: POST does not stop for diskette drive
errors, but stops for all other errors.
All, But Disk/Key: POST does not stop for a keyboard or
disk error, but stops for all other errors.
Memory
You cannot change any values in the Memory fields; they are only
for your information. The fields show the total installed random
access memory (RAM) and amounts allocated to base memory,
extended memory, and other (high) memory. RAM is counted in
kilobytes (KB: approximately one thousand bytes) and megabytes
(MB: approximately one million bytes).
RAM is the computer's working memory, where the computer
stores programs and data currently being used, so they are accessi-
ble to the CPU. Modern personal computers may contain up to 64
MB, 128 MB, or more.
Base Memory
Typically 640 KB. Also called conventional memory. The DOS
operating system and conventional applications use this area.
Chapter 3 Award BIOS Setup 51
Extended Memory
Above the 1-MB boundary. Early IBM personal computers could
not use memory above 1 MB, but current PCs and their software
can use extended memory.
Other Memory
Between 640 KB and 1 MB; often called High memory. DOS may
load, terminate-and-stay-resident (TSR) programs, such as device
drivers, in this area, to free as much conventional memory as
possible for applications. Lines in your CONFIG.SYS file that start
with LOADHIGH, load programs into high memory.
52 SBC-776 User Manual
Advanced BIOS Features
The displayed configuration is based on the manufacturer's SETUP
DEFAULTS settings.
Virus Warning
When enabled, you receive a warning message if a program
(specifically, a virus) attempts to write to the boot sector or the
partition table of the hard disk drive. You should then run an anti-
virus program. Keep in mind that this feature protects only the boot
sector, not the entire hard drive.
NOTE: Many disk diagnostic programs that access the boot sector
table can trigger the virus warning message. If you plan to run
such a program, we recommend that you first disable the virus
warning.
Chapter 3 Award BIOS Setup 53
CPU Internal Cache/External Cache
Cache memory is additional memory that is much faster than
conventional DRAM (system memory). CPUs from 486-type on up
contain internal cache memory, and most, but not all, modern PCs
have additional (external) cache memory. When the CPU requests
data, the system transfers the requested data from the main DRAM
into cache memory, for even faster access by the CPU.
The External Cache field may not appear if your system does not
have external cache memory.
CPU L2 Cache ECC Checking
When you select Enabled, memory checking is enable when the
external cache contains ECC SRAMs.
Processor Number Feature
This option is for Pentium III processor. During Enabled, this will
check the CPU Serial number. Disabled this option if you don't
want the system to know the serial number.
Quick Power On Self Test
Select Enabled to reduce the amount of time required to run the
power-on-self-test (POST). A quick POST skips certain steps. We
recommend that you normally disable quick POST. Better to find a
problem during POST than lose data during your work.
First/Second/Third/Fourth Boot Device
The BIOS attempts to load the operating system from the devices
in the sequence selected in these items.
The choices: Floppy, LS/ZIP, HDD, SCSI, CDROM, Disable.
54 SBC-776 User Manual
Swap Floppy Drive
This field is effective only in systems with two floppy drives.
Selecting enabled assigns physical drive B to logical drive A, and
physical drive A to logical drive B.
Boot Up Floppy Seek
When Enabled, the BIOS tests (seeks) floppy drives to determine
whether they have 40 or 80 tracks. Only 360-KB floppy drives
have 40 tracks; drives with 720 KB, 1.2 MB, and 1.44 MB
capacity all have 80 tracks. Because very few modern PCs have
40-track floppy drives, we recommend that you set this field to
Disabled to save time.
Boot Up NumLock Status
Toggle between On or Off to control the state of the NumLock key
when the system boots. When toggled On, the numeric keypad
generates numbers instead of controlling cursor operations.
Gate A20 Option
Gate A20 refers to the way the system addresses memory above 1
MB (extended memory). When set to Fast, the system chipset
controls Gate A20. When set to Normal, a pin in the keyboard
controller controls Gate A20. Setting Gate A20 to Fast improves
system speed, particularly with OS/2 and Windows.
Chapter 3 Award BIOS Setup 55
Typematic Rate Setting- Key strokes repeat at a
rate determined by the keyboard controller. When
enabled, the typematic rate and typematic delay can be
selected.
The choice: Enabled/Disabled
Security Option
If you have set a password, select whether the password
is required every time the System boots, or only when you enter
Setup.
OS Select For DRAM>64MB-Select the
operating system that is running with greater than 64MB
or RAM on the system.
The choice: Non-OS2, OS2
56 SBC-776 User Manual
HDD S.M.A.R.T Capability
Hard disk drives have built in problem detection
capability (Self-Monitoring Analysis and Reporting Technology).
If a foreseen problem is about to take place, the computer will
give a you a warning signal. The choice: Enable, Disable
Report No FDD For WIN 95- Report
no FDD for Win 95 or not. The choice: Yes, no
Chapter 3 Award BIOS Setup 57
Advanced Chipset Features
SDRAM CAS Latency Time
When synchronous DRAM is installed, the number of clock cycles of
CAS latency depends on the DRAM timing. Do not reset this field from
the default value specified by the system designer.
SDRAM Cycle Time Tras/Trc
Select the number of SCLKs for an access cycle.
The choices: 5/7, 7/9 disable.
SDRAM RAS-to-CAS Delay
This field lets you insert a timing delay between the CAS and RAS strobe
signals, used when DRAM is written to, read from, or refreshed. Fast
gives faster performance; slow gives more stable performance. This field
applies only when synchronous DRAM is installed in the system.
58 SBC-776 User Manual
SDRAM RAS Precharge Time
If an insufficient number of cycles is allowed for the RAS to accumulate
its charge before DRAM refresh, the refresh may be incomplete and the
DRAM may fail to retain date. Fast gives faster performance; slow gives
more stable performance. This field applies only when synchronous
DRAM is installed in the system.
System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-
FFFFFh, resulting in better system performance. However, if any program
writes to this memory area, a system error may result. The choices:
Enabled, Disabled
Video BIOS Cacheable
Selecting Enabled allows caching of the video BIOS ROM at C0000h to
C7FFFh, resulting in better video performance. However, if any program
writes to this memory area, a system error may result. The choices:
Enabled, Disabled Memory
Hole At 15-16m
In order to improve performance, certain space in memory is reserved for
ISA cards. This memory must be mapped into the memory. The choices:
15-16 M, disabled
CPU Latency Timer
During enable, a deferrable CPU cycle will only be Deferred after it has
been in Snoop Stall for 31 clocks and another ADS# has arrived. During
disable, a deferrable CPU cycle will be deferred immediately after the
GMCH receives another ADS#.
Delayed Transaction
The chipset has an embedded 32-bit posted write buffer to support delay
transactions cycles. Select Enabled to support compliance with PCI
specification version 2.1.
Chapter 3 Award BIOS Setup 59
AGP Graphics Aperture Size
Select the size of Accelerated Graphics Port (AGP) aperture. The
aperture is a portion of the PCI memory address range dedicated for
graphics memory address space. Host cycles that hit the aperture range
are forwarded to the AGP without any translation. The choices: 32M,
64M.
Display Cache Frequency
Display cache frequency will allow for the level the of the share memory
provided by the Intel 815E chipset to be adjusted.
The settings are 100MHz and 133 MHz.
System Memory Frequency
Select the onboard display cache frequency. The settings are auto,
100MHz and 133MHz.
On-Chip Video Window Size
Select the on-chip video window size for VGA drive use.
The choices: 32MB, 64MB, Disabled
Initial Display Cache
Cas# Latency
Select the local memory clock period. The number of
clock cycles of CAS# Latency depends on the Onboard
Display Cache timing. The choice: 2,3
Paging Mode Control
Select the paging mode control. The choice: open,
close
RAS-to-CAS Override
This item allows you to insert a timing delay between the
CAS and RAS strobe signals, used when Onboard
display cache is written to, read from, or refreshed.
During by CAS#LT, this will depend on the Onboard
Display Cache CAS# Latency setting. During Override
(2), RAS-to-CAS time = 2
Ras# Timing
This item controls RAS# active to Precharge, and refresh
to RAS# active delay ( in local memory clock ). The
choices: Fast, Slow
Ras# Precharge Timing
This item controls RAS# precharge ( in loca memory
clocks). The choices: Fast, slow
60 SBC-776 User Manual
Integrated Peripherals
On-Chip Primary PCI IDE
The system chipset contains a PCI IDE interface with support for
two IDE channels. Select Enabled to activate the primary and/or
secondary IDE interface. Select Disabled to deactivate this
interface, if you install a primary and/or secondary add-in IDE
interface.
On-Chip Secondary PCI IDE
The chipset contains a PCI IDE interface with support for two IDE
channels. Select Enabled to activate the secondary IDE interface.
Select Disabled to deactivate this interface.
The choices: Enable, Disable
IDE Primary/Secondary Master/Slave PIO
The four IDE PIO (Programmable Input/Output) fields let you set a
PIO mode (0-1) for each of the four IDE devices that the onboard
IDE interface supports. Modes 0 through 4 provide successively
increased performance. In Auto mode, the system automatically
determines the best mode for each device.
The choices: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Chapter 3 Award BIOS Setup 61
IDE Primary/Secondary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard
drive supports it and the operating environment includes a DMA
driver (Windows 95 OSR2 or a third-party IDE bus master driver).
If your hard drive and your system software both support Ultra
DMA/33, select Auto to enable BIOS support.
The choices: Auto, disable
USB Controller
Select Enabled if your system contains a Universal Serial Bus
controller and you have USB peripherals.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus
controller and you have a USB keyboard.
Init Display First
This item allows you to active PCI slot or onboard first.
The choice: PCI slot, onboard
AC97 Audio
The default setting of Auto enables the AC97 audio if it is detected
onboard
Onboard/CRN LAN selection
Testing purposes only. Leave this function in the AUTO setting.
8-bit I/O Recovery Time
The I/O recovery mechanism adds bus clock cycles between PCI-
originated I/O cycles to the ISA bus. This delay takes place
because the PCI bus is much faster than the ISA bus. This field
lets you add recovery time (in bus clock cycles) for 8-bit I/O.
The choice: 0-7 SYSCLK
62 SBC-776 User Manual
16-bit I/O Recovery Time
The I/O recovery mechanism adds bus clock cycles between PCI-
originated I/O cycles to the ISA bus. This delay takes place
because the PCI bus is much faster than the ISA bus. This field
lets you add recovery time (in bus clock cycles) for 16-bit I/O.
The choice: 1 SYSCLK, 2SYSCLK, 3SYSCLK, 4 SYSCLK
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or
multiple sector read/write. If your IDE hard drive supports block
mode (most new drives do), select Enabled for automatic detection
of the optimal number of block read/write per sector the drive can
support.
Power on Function
Select the different manners for powering on the system.
The choices: Keyboard 98, password, any key, hot key, button
only, mouse click, mouse move.
KB Power on Password
The system will ask for a password, after entering the correct
password the keyboard can then be used.
Ir Transmission Delay
The system IR component transmits and retrieves data from its
working environment, if enabled the IR system will detect or
transmit information. If disabled the IR system will be unable to
operate.
Use IR Pins
Consult your IR peripheral documentation to select the correct
setting of the TxD and RxD signals.
Chapter 3 Award BIOS Setup 63
Hot Key Power On
Simply pressing on the pre-selected keyboard key the system will
power on.
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC)
installed on the system board and you wish to use it. If you install
an add-in FDC or the system has no floppy drive, select Disabled
in this field.
UART Mode Select
Select an operating mode for the second serial port:
Normal
RS-232C serial port
IrDA 1.0
Infrared port compliant with IrDA 1.0
specification
IrDA SIR
IrDA MIR
IrDA FIR
ASK IR
SCR
IrDA-compliant serial infrared port
1 MB/sec infrared port
Fast infrared standard
Amplitude shift keyed infrared port
RxD, TxD Active
Consult your IR peripheral documention to select the correct
setting of the TxD and RxD signals
UR2 Duplex Mode
Select the value required by the IR device connected to the IR prot.
Full-duplex mode permits simultaneous two-direction transmission.
Half-duplex mode permits transmission in one direction only at a
time. If no infrared port is present in the system, select disabled.
Use IR Pins
Consult your IR peripheral documentation to select the correct
setting of the TxD and RxD signals.
64 SBC-776 User Manual
Onboard Serial Ports (1, 2)
Normally, the main board’s I/O chips will occupy a certain portion
of memory space. For each I/O device the computer provides an
I/O address. The more devices attached the more address needed
to organize the memory storage areas. If all the I/O devices were
run through the same address, your devices would come to a near
halt. By providing the end user with four serial ports this allows
devices to run more efficiently if needed. Also the corresponding
interrupt needs to be selected.
Selections of logical COM port addresses are as follows. ( 3F8/
IRQ4, 3E8/IRQ4, 2F8/IRQ3, 2E8/IRQ3)
Onboard Parallel Port
Select a logical LPT port address and corresponding interrupt for
the physical parallel port
The Choice: 378/IRQ7, 278/IRQ5, 3BC/IRQ7, disabled
Parallel Port Mode
Two bidirectional parallel ports. Supports SPP, ECP, EPP,
ECP + EPP.
EPP Mode Select
Select the EPP port type 1.7 or 1.9
ECP Mode Use DMA
Select a DMA channel for the port.
PWRON After PWR-Fail
This option will determine how the system will power on after a
power failure.
The choice: off, on , former status
Chapter 3 Award BIOS Setup 65
Watch Dog Timer
You can enable the system watchdog timer, a hardware timer that
generates either an NMI or a reset when the software that it
monitors does not respond as expected each time the watch dog
polls it ( select the time period in a separate field ) The choice:
Disabled, 20 sec, 30 sec, 40 sec, 50 sec, 1 min, 2 min, 4 min.
66 SBC-776 User Manual
Power Management Setup
ACPI Function
This item allows you to enable/disable the Advanced Configuration
and Power Management (ACPI). The Choices: Enable/Disable
ACPI Suspend Type
This item will set which ACPI suspend type will be used.
S1 (POS) The S1 sleeping state is low wake-up latency sleeping
state. In this state, no system context is lost (CPU or chip set) and
hardware maintains all system context.
S3 (STR) The S3 state is a low wake-up latency sleeping state
where all system context is lost expect system memory. CPU,
cache and chipset context are lost in this state. Hardware maintains
memory context and restores some CPU and L2 configuration
context.
Chapter 3 Award BIOS Setup 67
Power Management
This category allows you to select the type ( or degree ) of power
saving and is directly related to the following modes:
1. HDD Power Down
2. Doze Mode
3. Suspend Mode
Disable (Default)
No power management. Disable all four modes.
Minimum power managemen. Doze mode = 1
hour. Standby mode = 1 hour. Suspend mode =
1 hour. HDD Power Down =15 minutes.
Min. Power Saving
Maximum power management--ONLY
AVAILABLE FOR SL CPU’S. Dose mode =
1 min., Standby mode = 1 min., Suspend mode
= 1 min., and HDD Power Down = 1 min.
Max.Power Saving
User Defined
Allows you to set each mode individually. When
not disabled, each of the tanges are from 1 min.
to 1 hour except for HDD Power Down which
ranges from 1 min. to 15 min. and disable.
Video Off Method
This determines the manner in which the monitor is blanked.
This selection will cause the system to turn off
V/H SYNC + Blank
the vertical and horizontal synchronization ports
and write blanks to the video buffer
Blank Screen
DPMS
This option only writes blanks to the video buffer
Initial display power management signaling
68 SBC-776 User Manual
Video Off In Suspend
After the selected period of system inactivity, the chipset enters a
hardware suspend mode, stopping the CPU clock and possibly
causing other system devices to enter power management modes.
In this case the video hardware can be selected to shut off after a
period of system inactivity. This determines the manner in which
the monitor is blanked.
Suspend Type
Select the suspend type. The choice: PWRON suspend, Stop
Grant
MODEM use IRQ
This determines the IRQ in which the MODEM can use.
The choices: 3, 4, 5, 7, 9, 10, 11, NA
Suspend Mode
After the selected period of system inactivity, the chipset enters a
hardware suspend mode, stopping the CPU clock and possibly
causing other system devices to enter power management modes.
Soft-Off by PWR-BTTN
Pressing the power button for more than 4 seconds forces the
system to enter the Soft-Off state when the system has hung. The
choice: Delay 4 seconds, Instant-Off.
Wake Up On PCI Card
This will enable the system to wake up through PCI card
peripheral. The choice: Enable/Disable
Power On By Ring
An input signal on the serial Ring Indicator (RI) line (in other
words, an incoming call on the modem) boots the system from a
soft off state.
Chapter 3 Award BIOS Setup 69
USB KB Wake-up From S3
This option is used to Enabled/Disabled USB keyboard wake up
with suspend to RAM. The Choice: Enabled/Disabled
Power On after Power Fail
After initial power failure, the system will attempt to power up
again in the setting that the end user has selected.
The Choice: ON/OFF/Former status
CPU Thermal-Throttling
Select the CPU Thermal-Throttling rate for your system.
The choice: 12.5%, 25%, 37.5%, 50%, 62.5% 75%, 87.5%
Resume By Alarm
This option is used to Enable/Disable USB keyboard wake up with
suspend to RAM.
The choices: Enable, disable
Date Alarm
You can choose which month the system will boot up. Set to 0 to
boot everyday.
Time Alarm
You can choose what hour, minute and second the system will boot
up.
70 SBC-776 User Manual
<Reload Global Timer Events>
PM events are I/O events whose occurrence can prevent
the system from entering a power saving mode or can
awaken the system from such a mode. In effect, the
system remains alert for anything which occurs to a device
which is configured as Enabled, even when the system is
in a power down mode.
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ (A-D)#
Chapter 3 Award BIOS Setup 71
PnP/ PCI Configurations
PNP OS Installed
This item allows you to determine whether the PnP OS is installed
or not. Select Yes if the system operating environment is Plug and
Play aware. The settings are Yes or No.
Reset Configuration Data
Normally, you leave this field disabled. Select enabled to reset
Extended System Configuration Data (ESCD) when you exit Setup
if you have installed a new add-on and the system reconfiguration
has caused such a serious conflict that the operating system can not
boot. The choices: Enabled, Disabled
72 SBC-776 User Manual
Resources Controlled By
The Award Plug and Play BIOS has the capacity to automatically
configure all of the boot and Plug and Play compatible devices.
However, this capability means absolutely nothing unless you are
using a Plug and Play operating system such as Windows ® 95. If
you set this field to “manual” choose specific resources by going
into each of the sub menu that follows this field ( a sub menu is
proceeded by a “>”. The choices: Auto, Manual.
PCI/VGA Palette Snoop
Leave this field at Disabled. Choices: Enabled, Disabled.
Chapter 3 Award BIOS Setup 73
PC Health Status
CPU Warning Temperature
During enabled, this will warn the user when the CPU temperature
reach a certain temperature.
Options: Disabled, 75°C/167°F, 70°C/158°F, 65°C/149°F,
60°C/140°F
Shutdown Temperature
Your system can be configured to shutdown once reaching a certain
temperature. To protect your system from overheating or damage,
select a certain temperature level in the PC Health Status menu.
Options: Disabled, 75°C/167°F, 70°C/158°F, 65°C/149°F,
60°C/140°F
74 SBC-776 User Manual
Frequency/ Voltage Control
Auto Detect DIMM/PCI CLK
This item allows you to enable/disable auto detect DIMM/PCI
clock. The choices: Enable/Disable
Spread Spectrum
This allows you to enable/disable the spread spectrum modulate.
When the system clock generator pulses, the extreme values of the
pulse generate excess EMI. Enabling pulse spectrum spread
modulation changes the extreme pulse spikes to flat curves thus
reducing EMI.
The choices: Enable, Disable
Clock By Slight Adjust
This item allows you to select the CPU clock from 166 MHz to
100 MHz or 99 MHz to 66 MHz depending on the CPU host
clock.
CPU Clock Ratio
This item allows you to select the CPU ratio. When using an Intel
CPU this item will be hidden.
Chapter 3 Award BIOS Setup 75
Load Fail-Safe Defaults
Load Fail-Safe Defaults
When you press <Enter> on this item you get a confirmation dialog
box with a message similar to:
Load Fail-Safe Default (Y/N)?
Pressing “Y” loads the BIOS default values for the most stable,
minimal performance system operations.
76 SBC-776 User Manual
Load Optimized Default
Load Optimized Default
When you press <Enter> on this item you get a confirmation dialog
box with a message similar to:
Load Optimized Defaults (Y/N)?
Pressing “Y” loads the default values that are factory settings for
optimal performance system operations
Chapter 3 Award BIOS Setup 77
Set Supervisor Password
When you select this function, a message appears at the center of
the screen:
ENTER PASSWORD:
Type the password, up to eight characters, and press Enter. Typing
a password clears any previously entered password from CMOS
memory.
Now the message changes:
CONFIRM PASSWORD:
Again, type the password and press Enter.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen,
select System or Setup:
System Enter a password each time the system boots and when
ever you enter Setup.
Setup
Enter a password when ever you enter Setup.
NOTE: To clear the password, simply press Enter when asked to
enter a password. Then the password function is disabled.
78 SBC-776 User Manual
Set User Password
When you select this function, a message appears at the center of
the screen:
ENTER PASSWORD:
Type the password, up to eight characters, and press Enter. Typing
a password clears any previously entered password from CMOS
memory.
Now the message changes:
CONFIRM PASSWORD:
Again, type the password and press Enter.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen,
select System or Setup:
System Enter a password each time the system boots and when
ever you enter Setup.
Setup
Enter a password when ever you enter Setup.
NOTE: To clear the password, simply press Enter when asked to
enter a password. Then the password function is disabled.
Chapter 3 Award BIOS Setup 79
Save to CMOS and EXIT
Save to CMOS and EXIT
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and Exit (Y/N)?
Pressing “Y” stores the selections made in the menus in CMOS, a
special section of memory that stays on after you turn your system
off. The next time you boot your computer, the BIOS configures
your system according to the Setup selections stored in CMOS.
After saving the values the system is restarted again.
80 SBC-776 User Manual
Quit without Saving
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit Without Saving (Y/N)?
This allows you to exit Setup without storing in CMOS any change.
The previous selections remain in effect. This exits the Setup
utility and restarts your computer.
Chapter 3 Award BIOS Setup 81
4
DRIVERS INSTALLATION
This SBC-776 is equipped with an audio,
VGA and Dual LAN interface. This chapter provides
instructions for installing the software
drivers on these pheripherals.
SBC-776 User Manual
Installing Drivers
Notice: Attention
Please follow this “order of installation” for stable
and efficient operations.
1. Software installation utility
1.1 For WIN95/98/2000/Me
P.S WIN NT4.0 does not need this driver because it
can’t support Plug and Play.
2. Intel 82562ET LAN Driver
2.1 For WIN98/Me: Intel did not release 82562ET driver
for WIN95.
2.2 For WIN2000
2.3 For WIN NT4.0
3. Advansys 38C0800 SCSI Driver
3.1 For WIN95/98/Me
3.2 For WIN2000
3.3 For WIN NT4.0
4. Intel 82559ER:
4.1 For WIN95/98/2000/Me
4.2 For WIN NT 4.0
5. Intel 815E VGA Driver
5.1 For WIN95/98/Me
5.2 For WIN2000
5.3 For WIN NT4.0
6. Ultra ATA Storage Driver
6.1 For WIN98/2000/NT4.0
PS For WIN95: Intel did not release an Ultra ATA
storage driver for WIN95.
Notice: Attention
Chapter 4 Drivers
Notice: Attention
7. Advance Logic ALC200 Sound Driver
7.1 For WIN95
7.2 For WIN98
7.3 For WIN Me
7.4 For WIN2000
7.5 For Win NT 4.0
Notice: Attention
SBC-776 User Manual
Software Installation Utility
1.1 For WIN95/98/2000/Me
~~>Install the CDROM Driver into the CD disk drive.
~~>Find the Software Installation Utility Folder
~~>Find the WIN95/95/2000/Me folder
~~>Find the infinst_enu folder
~~>Find the disk 1 folder
~~>Find the setup icon and then double click
~~>Click on Next
~~>Click on Yes
~~>Click on Next, install the utility
~~>Click on Yes to restart computer now
~~>Click finish to restart
Chapter 4 Drivers
Intel 82562ET LAN Driver
2.1 & 2.2 Installation Procedures are the same.
~~>Click on Start button
~~>Click on Settings button
~~>Click on Control Panel button
~~>Click on Systems button
~~>Click on Device Manager button
~~>Click on Secondary PCI Ethernet Controller
~~>Click on Reinstall Driver
~~>Click on Next
~~>Select Display a list of the known drivers for this
device so that I can choose a specific driver
~~>Click on Next
~~>Select Network Adapters
~~>Click on Next
~~>Click on Have Disk
~~>Find the 82562ET folder
~~>Select your OS folder (WIN98/Me or WIN2000
folder)
~~>Click on Next
~~>Appear net82557.inf, click on Open
~~>Click on OK
~~>Find Intel PRO/100 VE Network Connection
~~>Click on Next
~~>Click on Next, install the driver
~~>Click on Finish
~~>Click on Close to finish the 82562ET driver
installation
SBC-776 User Manual
2.3 Installation Procedures for WIN NT4.0
*Please copy the 82562ET driver from the CDROM
onto Floppy Disks and insert into floppy drive*
~~>Click on Start button
~~>Click on Settings button
~~>Click on Control Panel button
~~>Double click on Network
~~>Click on Yes
~~>Click on Next
~~>Click on Select from List........
~~>Click on Have Disk
~~>Click on OK
~~>Click on OK
~~>Appear Intel Pro Adapter
~~>Click on OK
~~>Click on Next
~~>Select TCP/IP Protocol, NWlink IPX/SPX
Compatible Transport, NetBEUI Protocol (PS: This
depends on your system)
~~>Click on Next
~~>Click on Next
~~>Click on Next
~~>Type the WIN NT4.0 CDROM path (such as E:)
and then click on continue, setup will continue.
~~>Appear Do You want to use DHCP? (PS:Depends
on your system). Click on No.
~~>Setup your TCP/IP Properties
~~>Click on Next
~~>Click on Next
Chapter 4 Drivers
~~>Type the Workgroup name, click on Next
~~>Click on Yes
~~>Appear Do you want to restart your computer now?
Click on Yes.
SBC-776 User Manual
Advansys 38C0800 SCSI Driver
3.1 & 3.2 Installation Procedures are identical.
~~>Place CDROM into CD disk drive
~~>Click on Start button
~~>Click on Settings button
~~>Click on Control Panel button
~~>Click on Systems button
~~>Click on Device Manager button
~~>Click on SCSI Controller
~~>Click on Reinstall Driver
~~>Click on Next
~~>Select Display a list of know drivers for this........
~~>Select Network Adapters
~~>Click on Next
~~>Click on Have Disk
~~>Find the Advansys folder
~~>Select your O.S. folder (WIN95/98/ME/2000
folder)
~~>Click on Next
~~>Appear w2kadv.inf, click on open
~~>Click on OK
~~>Find Win2k Advansys Ultra 2 Wide SCSI Adapter,
click on next
~~>Shows the Update driver warning, click on yes
~~>Click on Next
~~>Click on Next
~~>Click on Finish
~~>Click on Close to finish the Advansys driver
installation
Chapter 4 Drivers
3.3 Installation procedures for WIN NT 4.0
~~>Place CDROM into CD disk drive
~~>Click on Start button
~~>Click on Settings button
~~>Click on Control Panel
~~>Double Click on SCSI Adapter
~~>Click on Drives
~~>Click on ADD
~~>Click on Have Disk
~~>Click on Browse, find the advansys folder
~~>Find the WIN NT 4.0 folder, under the name of
nt4adv.inf
~~>Click on Open
~~>Click on OK
~~>Click on Next
~~>Select WIN NT 4.0 Advansys Ultra 2 Wide SCSI
Adapter
~~>Appear Do you want to restart your computer now?
Click on yes.
SBC-776 User Manual
Intel 82559ER LAN Driver
4.1 Installation Direction for Intel 82559ER LAN Driver
~~>Place CDROM into CD disk drive
~~>Click on Start button
~~>Click Settings button
~~>Click on Control Panel button
~~>Click on System button
~~>Click on Device Manager button
~~>Click on PCI Ethernet Controller
~~>Click on Reinstall Driver
~~>Click on Next
~~>Select Display a list of the known drivers for this......
~~>Click on Next
~~>Select Network Adapter
~~>Click on Next
~~>Click on Have Disk
~~>Find the 82559ER folder
~~>Find the Drivers folder
~~>Find the 82559er drivers 17 folder
~~>Find the net 82559er.inf, click on Open
~~>Click on OK
~~>Find Intel GD82559ER PCI Adapter
~~>Click on Next
~~>Click on Next, install the driver
~~>Click on Yes
~~>Click on Finish
~~>Click on Close to finish the 82559ER driver
installation
Chapter 4 Drivers
4.2 Installation procedures for WIN NT 4.0
*Please copy the 82559ER driver from the CDROM
onto floppy disk and insert into the floppy drive*
~~>Place CDROM into CD disk drive
~~>Click on Start button
~~>Click on Setting button
~~>Click on Control Panel button
~~>Double click on Network
~~>Click on Adapters
~~>Click on ADD
~~>Click on Have Disk
~~>Click on OK
~~>Appear Intel 82559ER fast ethernet adapter
~~>Click on OK to install driver
~~>Click on Close
~~>Setup your TCP/IP Properties
~~>Appear Do you want to restart your computer now?
Click on Yes.
SBC-776 User Manual
Intel 815E VGA Driver
5.1, 5.2 & 5.3 Installation Procedures
~~>Place the CDROM into the CD disk drive
~~>Find the VGA folder
~~>Select your OS folder (WIN95/98/2000/NT)
~~>Select Graphic folder
~~>Select Setup icon, double click
~~>Click on Next
~~>Click on Yes, install VGA driver
~~>Click on finish, restart my computer now
Chapter 4 Drivers
Intel Ultra ATA Storage Driver
6.1 Installation procedures
~~>Place the CDROM into the CD disk drive
~~>Find the Ultra ATA driver folder
~~>Find the intel ATA603_enu icon, double click select
graphic folder
~~>Click on Next
~~>Click on Yes
~~>Click on Next
~~>Click on Next
~~>Select Yes, I want to restart my computer now
~~>Click on Finish, restart my computer now
SBC-776 User Manual
Advance Logic ALC200 Sound Driver
7.1-7.5 Installation procedures
~~>Place the CDROM into the CD disk drive
~~>Click on Advance ALC200 folder
~~>Select your OS folder (WIN95/98/2000/Me/NT)
~~>Double click on Setup icon
~~>You will see an optional language window, select
English
~~>Click on Next
~~>Click on go
~~>Click on Yes
~~>Restart my computer now
Chapter 4 Drivers
|