HP Hewlett Packard Hewlett Packard Computer Monitor L1740 17amp;quot; User Manual

User Guide  
HP L1740 17” and L1940 19”  
Flat Panel Monitors  
Document Part Number: 372837-001  
January 2005  
This guide provides information on setting up the monitor,  
installing drivers, using the on-screen display menu,  
troubleshooting and technical specifications.  
Enhanced for Accessibility  
Unfolding the Monitor Base. . . . . . . . . . . . . . . . . . . . . . . 3–1  
Selecting the Signal Connectors and Cables . . . . . . . 3–3  
The Information File . . . . . . . . . . . . . . . . . . . . . . . . . 4–1  
The Image Color Matching File . . . . . . . . . . . . . . . . 4–2  
Installing the .INF and .ICM Files . . . . . . . . . . . . . . . . . . 4–2  
Installing from the CD. . . . . . . . . . . . . . . . . . . . . . . . 4–2  
Downloading from the Worldwide Web . . . . . . . . . . 4–3  
Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–4  
Adjusting Monitor Settings . . . . . . . . . . . . . . . . . . . . . . . 4–5  
User Guide  
i
Contents  
Using the On-Screen Display . . . . . . . . . . . . . . . . . . 4–6  
Optimizing Analog Video . . . . . . . . . . . . . . . . . . . . . 4–9  
Sleep Timer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11  
2000 and Windows XP . . . . . . . . . . . . . . . . . . . . . . 4–13  
B Technical Specifications  
L1740 Flat Panel Monitor . . . . . . . . . . . . . . . . . . . . . . . . B–1  
Declaration of Conformity for Products Marked with FCC  
Logo, United States Only. . . . . . . . . . . . . . . . . . . . . . . . . C–2  
Canadian Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
European Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–3  
Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
Korean Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C–4  
ii  
User Guide  
EPA Energy Star Compliance . . . . . . . . . . . . . . . . . . . . . C–4  
Power Cord Set Requirements . . . . . . . . . . . . . . . . . . . . . C–5  
D LCD Monitor Quality  
and Pixel Policy  
User Guide  
iii  
1
Product Features  
The Flat Panel Display has an active matrix, thin-film transistor  
(TFT), liquid crystal display (LCD). The monitor features  
include:  
HP L1740 model, 17-inch (43.2 cm) viewable area display,  
with narrow bezels.  
HP L1940 model, 19-inch (48.3 cm) viewable area display,  
with narrow bezels.  
1280 × 1024 native resolution, plus full-screen support for  
lower resolutions.  
Wide viewing angle to allow viewing from a sitting or  
standing position, or moving side-to-side.  
Tilt, swivel, and height adjustment capabilities.  
Easily removable base for flexible mounting solutions.  
Multiple video inputs supported:  
VGA Analog  
DVI signal input (available on select models)  
VGA analog signal cable included.  
USB 2.0 hub with one upstream (connects to the computer)  
and two downstream (connects to USB devices) ports.  
USB cable included to connect the monitor’s USB ports to  
the USB connector on the computer.  
User Guide  
1–1  
   
Product Features  
Mounting feature on bottom of monitor to accept an optional  
Speaker Bar accessory kit.  
Plug and play capability if supported by your system.  
On-Screen Display (OSD) adjustments in English, Dutch,  
French, Italian, Simplified Chinese, German, and Spanish for  
ease of set-up and screen optimization.  
Software and documentation CD includes an information file  
(INF), Image Color Matching file (ICM), and product  
documentation.  
Energy Saver feature for Energy Star compliance.  
AssetControl  
Compliant with the following regulated specifications:  
EPA ENERGY STAR  
European Union CE Directives  
Swedish MPR II 1990  
Swedish TCO  
1–2  
User Guide  
2
Safety and Maintenance  
Guidelines  
Important Safety Information  
A power cord is included with your monitor. If another cord is  
used, use only a power source and connection appropriate for this  
monitor. For information on the correct power cord set to use with  
your monitor, refer to the “Power Cord Set Requirements” section  
in Appendix C.  
WARNING: To reduce the risk of electric shock or damage to your  
equipment, do not disable the power cord grounding feature. This  
equipment is designed to be connected to a grounded (earthed)  
power outlet that is easily accessible to the operator. The grounding  
plug is an important safety feature.  
Å
Å
WARNING: For your safety, be sure that the power outlet you plug  
the power cord into is easily accessible and located as close to the  
equipment as possible. When you need to disconnect the power to  
the equipment, unplug the power cord from the power outlet by  
grasping the plug firmly. Never pull on the cord.  
User Guide  
2–1  
     
Safety and Maintenance Guidelines  
CAUTION: For the protection of your monitor, as well as your  
Ä
computer, connect all power cords for your computer and its  
peripheral devices (such as a monitor, printer, scanner) to some form  
of surge protection device such as a power strip or Uninterruptible  
Power Supply (UPS). Not all power strips provide surge protection;  
the power strips must be specifically labeled as having this ability.  
Use a power strip whose manufacturer offers a Damage Replacement  
Policy so you can replace your equipment if surge protection fails.  
Maintenance Guidelines  
To enhance the performance and extend the life of your monitor:  
Do not open your monitor cabinet or attempt to service this  
product yourself. Adjust only those controls that are covered  
in the operating instructions. If your monitor is not operating  
properly or has been dropped or damaged, contact your HP  
authorized dealer, reseller, or service provider.  
Use only a power source and connection appropriate for this  
monitor, as indicated on the label/back plate of the monitor.  
Be sure the total ampere rating of the products connected to  
the outlet does not exceed the current rating of the electrical  
outlet, and the total ampere rating of the products connected  
to the cord does not exceed the rating of the cord. Look on the  
power label to determine the ampere rating (AMPS or A) for  
each device.  
Install your monitor near an outlet that you can easily reach.  
Disconnect the monitor by grasping the plug firmly and  
pulling it from the outlet. Never disconnect the monitor by  
pulling the cord.  
Turn your monitor off when not in use. You can substantially  
increase the life expectancy of your monitor by using a screen  
saver program and turning off the monitor when not in use.  
2–2  
User Guide  
 
Safety and Maintenance Guidelines  
Slots and openings in the cabinet are provided for ventilation.  
These openings must not be blocked or covered. Never push  
objects of any kind into cabinet slots or other openings.  
Do not drop your monitor or place it on an unstable surface.  
Do not allow anything to rest on the power cord. Do not walk  
on the cord.  
Keep your monitor in a well-ventilated area, away from  
excessive light, heat or moisture.  
When removing the monitor base, you must lay the monitor  
face down on a soft area to prevent it from getting scratched,  
defaced, or broken.  
Cleaning the Monitor  
1. Unplug the monitor from the wall outlet.  
2. Turn off the monitor and the computer.  
3. Clean the monitor plastics with a clean cloth dampened with  
water.  
4. Clean the monitor screen with an antistatic screen cleaner.  
CAUTION: Do not use benzene, thinner, ammonia, or any other  
volatile substances to clean your monitor or the screen. These  
chemicals may damage the cabinet finish as well as the screen.  
Ä
Shipping the Monitor  
Keep the original packing box in a storage area. You may need it  
later if you move or ship your monitor.  
User Guide  
2–3  
   
3
Setting Up the Monitor  
To set up the monitor, ensure that the power is turned off to the  
monitor, computer system, and other attached devices, then  
follow the steps below.  
Unfolding the Monitor Base  
The monitor is shipped with the base attached in a folded flat  
position. To begin using the monitor, you must unfold the base  
and place the monitor in an upright position.  
Unfolding the Base  
User Guide  
3–1  
     
Setting Up the Monitor  
Identifying Rear Panel Components  
Rear Panel Components  
No. Component Function  
1
2
3
4
AC power  
connector  
Connects the AC power cord to the monitor.  
USB downstream  
connectors  
Connects optional USB devices to the monitor.  
USB upstream  
connector  
Connects the USB cable to the host (computer or  
another USB hub).  
DVI connector  
(available on select  
models)  
Connects the DVI-D signal cable to the monitor.  
5
VGA connector  
Connects the VGA cable to the monitor.  
3–2  
User Guide  
 
Setting Up the Monitor  
Selecting the Signal Connectors and Cables  
There are two signal input connectors:  
VGA connector  
DVI-D connector (available on select models)  
The monitor will automatically determine which inputs have  
valid video signals. The inputs can be selected through the  
On-Screen Display (OSD) feature or by pressing the + button (to  
enable VGA signal input) or the button (to enable DVI signal  
input) on the monitor front bezel.  
Connecting the Monitor  
WARNING: To reduce the risk of electric shock or damage to your  
Å
equipment: Do not disable the power cord grounding plug. The  
grounding plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is  
easily accessible at all times.  
Disconnect power from the monitor by unplugging the power cord  
from the electrical outlet.  
Do not place anything on power cords or cables. Arrange them so  
that no one may accidentally step on or trip over them. Do not pull on  
a cord or cable. When unplugging from the electrical outlet, grasp  
the cord by the plug.  
User Guide  
3–3  
   
Setting Up the Monitor  
1. Place the monitor in a convenient, well-ventilated location  
near your computer.  
2. Pivot the monitor to the portrait position. Connect one end of  
the power cable to the power connector on the monitor 1,  
and the other end to an electrical wall outlet 2.  
Connecting the Power Cable  
3–4  
User Guide  
Setting Up the Monitor  
3. For analog operation, connect one end of the VGA signal  
cable to the VGA connector on the monitor 1, and the other  
end to the VGA connector on the computer 2.  
Connecting the VGA Signal Cable  
User Guide  
3–5  
Setting Up the Monitor  
4. Connect the USB cable to the USB upstream connector on  
the monitor 1 and to a convenient USB connector on the  
computer 2.  
Connecting the USB Cable  
3–6  
User Guide  
Setting Up the Monitor  
5. Adjust the monitor as needed for your comfort using the  
monitor’s tilt, swivel, and height adjustment capabilities.  
Adjusting the Tilt  
Adjusting the Swivel  
User Guide  
3–7  
Setting Up the Monitor  
Adjusting the Height  
3–8  
User Guide  
Setting Up the Monitor  
Pivoting the Monitor  
CAUTION: Burn-in image damage may occur on monitors that  
display the same static image on screen for a prolonged period of  
time. To avoid burn-in image damage on your monitor screen, you  
should always activate a screen saver application or turn off the  
monitor when it is not in use for a prolonged period of time.  
Ä
User Guide  
3–9  
Setting Up the Monitor  
Removing the Monitor Base  
The monitor base can be removed to mount the monitor on a wall,  
a swing arm or other mounting fixture. Read the caution and  
warning statements below before beginning the procedure.  
CAUTION: Before beginning to disassemble the monitor, be sure the  
Ä
monitor is turned off and the power and signal cables are both  
disconnected.  
Lay the front bezel down on a soft area to prevent it from getting  
scratched, defaced, or broken  
WARNING: Do not remove the base from the monitor while the  
Å
monitor is in the upright position. Before removing the monitor from  
the base, ensure that the monitor is lying flat, front bezel down, and  
that the base is set to the maximum base extension. Attempting to  
remove the monitor from the base while upright in the minimum base  
extension may result in injury to the user.  
1. Disconnect and remove the signal and power cables from the  
back of the monitor.  
CAUTION: Ensure that the bottom of the monitor base is positioned  
over a table or desktop before removing the base from the monitor.  
Ä
3–10  
User Guide  
 
Setting Up the Monitor  
2. Remove the four screws 1 from the monitor base.  
3. Remove the monitor base 2 from the monitor.  
Removing the Monitor Base  
Mounting the Monitor  
1. Remove the monitor base. Refer to “Removing the Monitor  
Base” steps in the previous section.  
For stand mounting purposes, when the base is removed, four  
threaded mounting holes are exposed on the display panel. These  
mounting holes are spaced 100 mm apart and are compliant with  
the Video Electronics Standards Association (VESA) standard for  
mounting flat panel displays.  
User Guide  
3–11  
 
Setting Up the Monitor  
2. Using the screws 1 previously removed from the monitor  
base, mount the display 2 to a swing arm or other mounting  
fixture. Consult the documentation included with the  
mounting fixture for additional instructions.  
Mounting the Monitor  
3–12  
User Guide  
Setting Up the Monitor  
Locating the Rating Label  
The rating label 1 is located along the bottom of the rear panel of  
the monitor.  
Locating the Rating Label  
User Guide  
3–13  
 
4
Operating the Monitor  
Software and Utilities  
The monitor includes a CD that contains two files you can install  
on your computer:  
an .INF (Information) file  
an .ICM (Image Color Matching) file  
Adobe Acrobat Reader is supplied on this CD and can be  
installed from the menu.  
If the monitor does not include a CD, the .INF and .ICM files can  
be downloaded from the HP monitors support Web site. See  
“Downloading from the Worldwide Web” in this chapter.  
The Information File  
The .INF file enables the computer to communicate with the  
monitor and use all the monitor features. The .INF file defines  
monitor resources used by Microsoft Windows operating systems  
to ensure monitor compatibility with the computer’s graphics  
adapter.  
This monitor is Windows Plug and Play compatible and the  
monitor will work correctly without installing the .INF file.  
Monitor Plug and Play compatibility requires that the computer’s  
graphic card is VESA DDC2 compliant and that the monitor  
connects directly to the graphics card. Plug and Play does not  
User Guide  
4–1  
       
Operating the Monitor  
work through separate BNC type connectors or through  
distribution buffers/boxes. You may need to install the .INF file if  
these conditions are not met.  
The Image Color Matching File  
The .ICM file provides accurate color representation. The .ICM  
files are data files that are used in conjunction with graphics  
programs to provide consistent color matching from monitor  
screen to printer, or from scanner to monitor screen. The .ICM  
file contains a monitor color system profile. This file is activated  
from within graphics programs that support this feature.  
The ICM color profile is written in accordance with the  
International Color Consortium (ICC) Profile Format  
specification.  
Installing the .INF and .ICM Files  
After you determine that you need to update, you can install the  
.INF and .ICM files from the CD or download them.  
Installing from the CD  
To install the .INF and .ICM files on the computer from the CD:  
1. Insert the CD in the computer CD-ROM drive. The CD menu  
displays.  
2. View the “INF and ICM Readme” file.  
3. Select “Install INF and ICM Files.”  
4. Follow the on-screen instructions.  
5. After the INF software has been installed, restart Windows.  
4–2  
User Guide  
     
Operating the Monitor  
6. Ensure that the proper resolution and refresh rates appear in  
the Windows Display control panel.  
You may need to install the digitally signed monitor .INF and  
.ICM files manually from the CD in the event of an installation  
error. Refer to the INF and ICM Readme file on the CD.  
Downloading from the Worldwide Web  
To download the latest version of .INF and .ICM files from the  
HP monitors support Web site:  
1. Refer to http://www.hp.com/support and select your country  
region.  
2. Follow the links for your monitor to the support page and  
download page.  
3. Ensure your system meets the requirements.  
4. Download the software by following the instructions.  
User Guide  
4–3  
 
Operating the Monitor  
Front Panel Controls  
Front Panel Controls  
No. Control  
Function  
1
Auto Adjust  
Activates the auto adjustment feature for optimum  
image.  
2
3
Menu  
Opens the On-Screen Display (OSD) menu.  
– (Minus)  
• If OSD is on, press to navigate backward through  
the OSD menu features and decrease adjustment  
levels.  
• If OSD is off, press to enable the DVI signal input  
(available on select models)  
4
5
+ (Plus)  
Power  
• If OSD is on, press to navigate forward through the  
OSD menu features and increase adjustment levels.  
• If OSD is off, press to enable the VGA signal input.  
Turns the monitor on or off.  
4–4  
User Guide  
 
Operating the Monitor  
Adjusting Monitor Settings  
Use the On-Screen Display (OSD) to adjust the screen image  
based on your viewing preferences. To access the OSD, do the  
following:  
1. If the monitor is not already on, press the Power switch to  
turn on the monitor.  
2. Press the Menu button on the monitor’s front panel to launch  
the OSD Main Menu.  
3. To navigate through the OSD Menu, press the + (Plus) button  
on the monitor’s front panel to scroll up, or the – (Minus)  
button to scroll in reverse.  
4. To select an item from the OSD Menu, use the + or – buttons  
to scroll to and highlight your selection, then press the Menu  
button to select that function.  
5. Adjust the item using the + or – buttons on the front panel to  
adjust the scale.  
User Guide  
4–5  
 
Operating the Monitor  
6. After adjusting the function, select Save and Return, or  
Cancel if you don’t want to save the setting, then select Exit  
from the Main Menu.  
If the buttons remain untouched for 10 seconds while displaying a  
menu, the new adjustments will be saved when the OSD  
automatically times out and exits the menu.  
Using the On-Screen Display  
There are two On-Screen Display menus available; one for basic  
adjustments, and one for advanced adjustments.  
To access the Basic OSD Menu, press the menu button on the  
monitor's front panel.  
Basic OSD Menu Levels  
Menu Level 1  
Menu Level 2  
Brightness  
Adjustment Scale  
Adjustment Scale  
Contrast  
Auto Adjustment  
Advanced Menu  
Exit  
To access the Advanced OSD Menu, press the menu button again,  
or select Advanced Menu from the Basic OSD Menu.  
After selecting the Advanced Menu from the Basic Menu, the  
Advanced Menu remains the default OSD on subsequent  
power-ups of the monitor until the Basic Menu is selected or  
Factory Reset is applied.  
4–6  
User Guide  
 
Operating the Monitor  
The Advanced OSD Menu has up to three sublevels and can be  
viewed in one of seven available languages. The following table  
provides the menus and their functions at each level:  
Advanced OSD Menu Levels  
Level 1  
Level 2  
Level 3  
Factory  
Preset  
Brightness  
Contrast  
Image Control  
Adjustment Scale  
Adjustment Scale  
Auto Adjustment  
Horizontal Position Adjustment Scale  
Vertical Position  
Clock  
Y
Y
Y
Y
Y
Y
Y
Adjusting” Message  
Adjustment Scale  
Adjustment Scale  
Adjustment Scale  
Clock Phase  
Cancel  
Save and Return  
9300 K  
Color  
6500 K  
Y
Custom Color  
Custom Color  
Adjustment  
sRGB  
Cancel  
Save and Return  
Deutsch  
Language  
S. Chinese  
English  
Espanol  
N
N
Francais  
Italiano  
Nederlands  
Cancel  
Save and Return  
Power Saver  
Power On Recall  
Management  
On / Off Selection  
On / Off Selection  
N
N
User Guide  
4–7  
Operating the Monitor  
Advanced OSD Menu Levels (Continued)  
Level 1  
Level 2  
Level 3  
Factory  
Preset  
Mode Display  
Power-On Status  
Display  
On / Off Selection  
On / Off Selection  
N
N
Sleep Timer  
Default Video Input Analog - VGA  
Digital  
Timer Set Menu  
N
N
Serial Number  
Basic Menu  
Cancel  
Display monitor s/n  
N
Save and Return  
OSD Control  
Horizontal OSD  
Position  
Vertical OSD  
Position  
OSD Timeout  
Cancel  
Adjustment Scale  
Adjustment Scale  
Adjustment Scale  
N
N
N
Save and Return  
Current Settings  
Information  
Recommended  
Settings  
Serial Number  
Total Hours  
Backlight Hours  
Exit  
Factory Reset  
Exit  
Yes  
No  
4–8  
User Guide  
Operating the Monitor  
Adjusting Screen Quality  
Allow the monitor to warm up for 20 minutes before performing  
the following procedures.  
The Auto-adjustment feature automatically fine-tunes the image  
quality each time a new video mode is utilized. If additional  
improvement is desired, press the Auto adjust button on the front  
bezel.  
For more precise adjustments, use the adjustment pattern utility  
provided on the CD, and adjust the clock and phase settings  
(accessed from the OSD menu) as described in the following  
section.  
Optimizing Analog Video  
This monitor contains advanced circuitry that allows the flat  
panel screen to function like a standard monitor. Two controls in  
the on-screen display can be adjusted to improve image  
performance: Clock and Clock Phase. Use these controls only  
when the auto-adjust function does not provide a satisfactory  
image.  
The Clock must first be set correctly since the Clock Phase  
settings are dependent on the main Clock setting.  
Clock—Increase/decrease the value to minimize any vertical  
bars or stripes visible on the screen background.  
Clock Phase—Increase/decrease the value to minimize video  
distortion or video jitter.  
When using the controls, you will obtain the best results by using  
the adjustment pattern application provided on the CD-ROM.  
User Guide  
4–9  
   
Operating the Monitor  
When adjusting the Clock and Clock Phase values, if the monitor  
images become distorted, continue adjusting the values until the  
distortion disappears. To restore the factory settings, select Yes  
from the Factory Reset menu in the on-screen display.  
Identifying Monitor Conditions  
Special messages will appear on the monitor screen when  
identifying the following monitor conditions:  
Input Signal Out of Range— Indicates the monitor does not  
support the input signal because the resolution and/or refresh  
rate are set higher than the monitor supports. Set the  
resolution and refresh rate for 1280 x 1024 at 60 Hz. Restart  
your computer for the new settings to take effect.  
Monitor Going to Sleep— Indicates the screen display is  
entering a sleep mode.  
Check Video Cable— Indicates the video cable is not  
properly connected to the computer.  
No Input Signal— Indicates the monitor is entering a reduced  
power state but the power saving feature is set to off.  
Auto Adjustment in Progress— Displays when auto  
adjustment feature is active.  
OSD Lock—The OSD can be enabled or disabled by pressing  
and holding the Menu button on the front panel for 10  
seconds. If the OSD is locked, the warning message “OSD  
Lock” displays for ten seconds.  
If the OSD is locked, press and hold the Menu button for  
10 seconds to unlock the OSD.  
If the OSD is unlocked, press and hold the Menu button  
for 10 seconds to lock the OSD.  
4–10  
User Guide  
 
Operating the Monitor  
Sleep Timer Mode  
The Sleep Timer mode is an energy-saving feature that enables  
you to set a time for the monitor to power on and off at the same  
time every day. This also extends the life of the backlight bulbs in  
the monitor. The Sleep Timer has five settings:  
Set Current Time  
Set Sleep Time  
Set On Time  
Timer: On/Off  
Sleep Now  
To set the timer:  
1. Press the Menu button on the monitor front panel to display  
the Advanced Menu.  
2. Scroll down and highlight Management.  
3. Press the Menu button to select Management.  
4. Scroll down and highlight and select Sleep Timer > Set  
Current Time.  
You must set the current local time before you reset the time for  
Sleep Time or On Time. Note that the time is displayed in a 24  
hour clock format. For example, 1:15 p.m. displays as 13 hours  
15 minutes.  
5. Press the Menu button once to enter the adjustment mode for  
hours.  
6. Press the - (Minus) or + (Plus) buttons to adjust the hour.  
7. Press the Menu button again to enter the time for minutes.  
8. Press the - (Minus) or + (Plus) buttons to adjust the minutes.  
User Guide  
4–11  
 
Operating the Monitor  
9. Press the Menu button to lock in the time chosen.  
10. After setting the current time, the highlight automatically  
skips to Set Sleep Time hours. Repeat steps 6 through 9 to set  
Sleep Time.  
11. If you do not want to set Sleep Time, press the Menu button  
twice, then select Save and Return to exit the menu.  
12. After setting Sleep Time, the highlight automatically skips to  
Set On Time hours. Repeat steps 6 through 9 to set On Time.  
13. Set the Timer mode to On to activate the Sleep Timer  
settings.  
14. When you are finished, select Save and Return to exit the  
menu.  
The fifth selection, Sleep Now, turns the monitor backlights off  
immediately and stays in sleep mode until the next On Time  
activates or a monitor button is pressed.  
sRGB Support  
The monitor is designed to support sRGB for color management,  
which adapts to the color standards used in the image technology  
industry. Additional information on sRGB is available on  
To take advantage of the sRGB support, you will need to change  
your monitor’s color temperature to sRGB and install the sRGB  
color profile (ICM) file.  
The sRGB color temperature preset will improve the color  
accuracy of sRGB images on the computer monitor, but some  
color variation may still occur.  
4–12  
User Guide  
 
Operating the Monitor  
Changing the Color Temperature  
1. Press the Menu button on the front panel of the monitor to  
launch the Main Menu of the OSD.  
2. Select Advanced Menu to access all options in the Main  
Menu.  
3. Select Color to display the Color Temperature menu.  
4. Select sRGB.  
5. Select Save and Return to exit the menu.  
Installing the sRGB ICM File for Microsoft  
Windows 2000 and Windows XP  
To complete the following procedure, you must be logged in as an  
administrator or a member of the administrator’s group. If the  
computer is connected to a network, network policy settings may  
prevent you from completing this procedure.  
The sRGB ICM file does not support Windows 95 and Windows  
NT operating systems  
1. Click the Display icon in the Control Panel.  
2. In the Display Properties windows, select the Settings tab,  
then click the Advanced button.  
3. Select the Color Management tab, then click the Add button  
to open the Add Profile Association dialog box.  
4. Select the “sRGB Color Space Profile.icm” file, then click  
the Add button  
5. To activate a color profile for your monitor, you must set it as  
the Default Monitor Profile. Select “sRGB Color Space  
Profile,” then click Set as Default button.  
6. Click Apply or OK.  
User Guide  
4–13  
   
A
Troubleshooting  
Solving Common Problems  
The following table lists possible problems, the possible cause of  
each problem, and the recommended solutions.  
Problem  
Possible Cause  
Solution  
Screen is blank.  
Power cord is  
disconnected.  
Connect the power cord.  
Power switch on front  
panel of the monitor is  
turned off.  
Press the front panel power  
button.  
Video cable is  
improperly connected.  
Connect the video cable  
properly. Refer to Chapter 3,  
Setting Up the Monitor, for  
more information.  
Screen blanking utility is  
active.  
Press any key on the  
keyboard or move the  
mouse to inactivate the  
screen blanking utility.  
User Guide  
A–1  
     
Troubleshooting  
Problem  
Possible Cause  
Solution  
Image appears  
blurred, indistinct, or  
too dark.  
Brightness and contrast  
are too low.  
Press the Auto Adjust button  
on the front panel. If this  
does not correct the image,  
press the Menu button to  
open the Basic OSD Menu,  
and adjust the brightness  
and contrast scales as  
needed.  
Image is not  
centered.  
Position may need  
adjustment.  
Press the Menu button to  
access the OSD menu.  
Select Image Control/  
Horizontal Position or  
Vertical Position to adjust the  
horizontal or vertical  
position of the image.  
“Check Signal  
Cable” is displayed  
on screen.  
Monitor video cable is  
disconnected.  
Connect the 15-pin monitor  
video cable to the VGA  
connector on the computer,  
or, if connected, check the  
DVI-D signal cable to the  
DVI connector on the  
computer, or the VGA to  
DVI-I cable to the VGA  
connector on the computer  
(DVI available on select  
models only). Be sure that  
the computer power is off  
while connecting the video  
cable.  
“Out of Range. Set  
Monitor to 1280 x  
1024 @ 60Hz” is  
displayed on screen.  
Video resolution and/or  
refresh rate are set  
higher than what your  
monitor supports.  
Restart your computer and  
enter Safe Mode. Change  
your settings to a supported  
setting (see “Factory Preset  
Display Modes” table in  
Appendix B). Restart your  
computer so that the new  
settings take effect.  
A–2  
User Guide  
Troubleshooting  
Using the Worldwide Web  
For online access to technical support information, self-solve  
tools, online assistance, community forums of IT experts, broad  
multivendor knowledge base, monitoring and diagnostic tools, go  
Preparing to call Technical Support  
If you cannot solve a problem using the troubleshooting tips in  
this section, you may need to call technical support. Have the  
following information available when you call:  
The monitor  
Monitor model number  
Serial number for the monitor  
Purchase date on invoice  
Conditions under which the problem occurred  
Error messages received  
Hardware configuration  
Hardware and software you are using  
User Guide  
A–3  
   
B
Technical Specifications  
All performance specifications are provided by the component  
manufacturers. Performance specifications represent the highest  
specification of all HP’s component manufacturers’ typical level  
specifications for performance and actual performance may vary  
either higher or lower.  
L1740 Flat Panel Monitor  
L1740 Flat Panel Monitor  
Display  
Type  
17.0 inches  
TFT LCD  
43.2 cm  
Viewable Image Size  
17.0-inch diagonal  
43.2 cm  
Tilt  
--5 to 35°  
Swivel  
--90 to 90°  
Face Treatment  
Anti-glare polarizer with  
hard coating  
Maximum Weight  
17.6 lbs.  
8.0 kg  
(Unpacked, base attached)  
Dimensions  
Height (maximum)  
Depth  
Width  
18.8 inches  
10.4 inches  
14.6 inches  
479.5 mm  
265.0 mm  
373.3 mm  
User Guide  
B–1  
     
Technical Specifications  
L1740 Flat Panel Monitor (Continued)  
Maximum Graphics Resolution 1280 x 1024 (75 Hz) analog and digital modes  
Text Mode  
Dot Pitch  
720 x 400  
0.264 x 0.264 mm  
30 to 83 kHz  
Horizontal Frequency  
(analog mode)  
Vertical Refresh Rate  
(analog mode)  
56 to 76 Hz  
Environmental Requirements  
Temperature:  
Operating Temperature  
Non-operating Temperature  
41 to 95° F  
-4 to 140° F  
5 to 35° C  
-20 to 60° C  
Relative Humidity  
Power Source  
20 to 80%  
100 - 240 VAC, 60-50 Hz  
Power Consumption  
Input Terminals  
<70 watts typical  
15-pin D-type connector with cable included  
DVI-D connector with DVI-D cable not included  
(available on select models)  
B–2  
User Guide  
Technical Specifications  
L1940 Flat Panel Monitor  
L1940 Flat Panel Monitor  
Display  
Type  
19.0 inches  
TFT LCD  
48.3 cm  
Viewable Image Size  
19.0-inch diagonal  
48.3 cm  
Tilt  
--5 to 35°  
Swivel  
--90 to 90°  
Face Treatment  
Anti-glare polarizer with  
hard coating  
Maximum Weight  
18.5 lbs.  
8.4 kg  
(Unpacked, base attached)  
Dimensions  
Height  
Depth  
Width  
18.8 inches  
10.4 inches  
16.3 inches  
477 mm  
265 mm  
413 mm  
Maximum Graphics Resolution 1280 x 1024 (75 Hz) analog and digital modes  
Text Mode  
Dot Pitch  
720 x 400  
0.264 x 0.264 mm  
30 to 83 kHz  
Horizontal Frequency  
(analog mode)  
Vertical Refresh Rate  
(analog mode)  
56 to 76 Hz  
Environmental Requirements  
Temperature:  
Operating Temperature  
Non-operating Temperature  
41to 95° F  
-4 to 140° F  
5 to 35° C  
-20 to +60° C  
User Guide  
B–3  
 
Technical Specifications  
L1940 Flat Panel Monitor (Continued)  
Relative Humidity  
Power Source  
20 to 80%  
100 - 240 VAC, 60-50 Hz  
<70 watts typical  
Power Consumption  
Input Terminals  
15-pin D-type connector with cable included.  
DVI-D connector with DVI-D cable not included  
(available on select models)  
Recognizing Preset Display Resolutions  
The display resolutions listed below are the most commonly used  
modes and are set as factory defaults. This monitor automatically  
recognizes these preset modes and they will appear properly sized  
and centered on the screen.  
Factory Preset Display Modes  
Preset  
Pixel Format  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
Horz Freq (kHz)  
Vert Freq (Hz)  
60.0  
1
2
3
4
5
6
7
8
31.5  
37.9  
37.5  
31.5  
37.9  
48.1  
46.9  
49.7  
73.0  
75.0  
70.0  
60.0  
72.0  
75.0  
75.0  
B–4  
User Guide  
 
Technical Specifications  
Factory Preset Display Modes (Continued)  
Preset  
9
Pixel Format  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 870  
1152 x 900  
1280 x 1024  
1280 x 1024  
Horz Freq (kHz)  
Vert Freq (Hz)  
60.0  
48.4  
56.5  
60.0  
68.7  
71.7  
64.0  
80.0  
10  
70.0  
11  
75.0  
12  
75.0  
13  
76.0  
14  
60.0  
15  
75.0  
Entering User Modes  
The video controller signal may occasionally call for a mode that  
is not preset if:  
You are not using a standard graphics adapter.  
You are not using a preset mode.  
If this occurs, you may need to readjust the parameters of the  
monitor screen by using the on-screen display. Your changes can  
be made to any or all of these modes and saved in memory. The  
monitor automatically stores the new setting, then recognizes the  
new mode just as it does a preset mode. In addition to the 15  
factory preset modes, there are ten user modes that can be entered  
and stored.  
User Guide  
B–5  
 
Technical Specifications  
Energy Saver Feature  
When the monitor is in its normal operating mode, the monitor  
uses less than 70 watts of power and the Power light is green.  
The monitor also supports a reduced power state. The reduced  
power state will be entered into if the monitor detects the absence  
of either the horizontal sync signal and/or the vertical sync signal.  
Upon detecting the absence of these signals, the monitor screen is  
blanked, the backlight is turned off, and the Power light is turned  
amber. When the monitor is in the reduced power state, the  
monitor will utilize less than 2 watts of power. There is a brief  
warm up period before the monitor will return to its normal  
operating mode.  
Refer to your computer manual for instructions on setting energy  
saver features (sometimes called power management features).  
The above energy saver feature only works when connected to  
computers that have energy saver features.  
By selecting settings in the monitor’s Energy Saver utility, you  
can also program the monitor to enter into the reduced power  
state at a predetermined time. When the monitor’s Energy Saver  
utility causes the monitor to enter the reduced power state, the  
Power light blinks amber.  
B–6  
User Guide  
 
C
Agency Regulatory Notices  
Federal Communications  
Commission Notice  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference  
will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of  
the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the  
receiver.  
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio or television  
technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or  
modifications made to this device that are not expressly approved  
by Hewlett Packard Company may void the user's authority to  
operate the equipment.  
User Guide  
C–1  
       
Agency Regulatory Notices  
Cables  
Connections to this device must be made with shielded cables  
with metallic RFI/EMI connector hoods to maintain compliance  
with FCC Rules and Regulations.  
Declaration of Conformity for  
Products Marked with FCC Logo,  
United States Only  
This device complies with Part 15 of the FCC Rules. Operation is  
subject to the following two conditions: (1) this device may not  
cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause  
undesired operation.  
For questions regarding your product, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call1  
1-800- 652-6672  
For questions regarding this FCC declaration, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call  
(281) 514-3333  
To identify this product, refer to the Part, Series, or Model  
number found on the product.  
C–2  
User Guide  
   
Agency Regulatory Notices  
Canadian Notice  
This Class B digital apparatus meets all requirements of the  
Canadian Interference-Causing Equipment Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Règlement sur le matériel brouilleur du Canada.  
European Notice  
Products with the CE Marking comply with both the EMC  
Directive (89/336/EEC) and the Low Voltage Directive  
(73/23/EEC) issued by the Commission of the European  
Community.  
Compliance with these directives implies conformity to the  
following European Norms (in brackets are the equivalent  
international standards):  
EN55022 (CISPR 22) - Electromagnetic Interference  
EN55024 (IEC61000-4-2,3,4,5,6,8,11) - Electromagnetic  
Immunity  
EN61000-3-2 (IEC61000-3-2) – Power Line Harmonics  
EN61000-3-3 (IEC61000-3-3) – Power Line Flicker  
EN60950 (IEC950) - Product Safety  
User Guide  
C–3  
     
Agency Regulatory Notices  
Japanese Notice  
Korean Notice  
EPA Energy Star Compliance  
Monitors that are marked with the Energy Star Logo meet the  
requirements of the EPA Energy Star program. As an Energy Star  
Partner, Hewlett Packard Company has determined that this  
product meets the Energy Star guidelines for energy efficiency.  
Specific details on using the Energy Saving features can be found  
in the energy saver or power management section of the computer  
manual.  
C–4  
User Guide  
     
Agency Regulatory Notices  
Power Cord Set Requirements  
The monitor power supply is provided with Automatic Line  
Switching (ALS). This feature allows the monitor to operate on  
input voltages between 100-120V or 200-240V.  
The power cord set (flexible cord or wall plug) received with the  
monitor meets the requirements for use in the country where you  
purchased the equipment.  
If you need to obtain a power cord for a different country, you  
should purchase a power cord that is approved for use in that  
country.  
The power cord must be rated for the product and for the voltage  
and current marked on the product's electrical ratings label. The  
voltage and current rating of the cord should be greater than the  
voltage and current rating marked on the product. In addition, the  
cross-sectional area of the wire must be a minimum of 0.75 mm²  
or 18AWG, and the length of the cord must be between 6 feet  
(1.8 m) and 12 feet (3.6 m). If you have questions about the type  
of power cord to use, contact your HP authorized service  
provider.  
A power cord should be routed so that it is not likely to be walked  
on or pinched by items placed upon it or against it. Particular  
attention should be paid to the plug, electrical outlet, and the  
point where the cord exits from the product.  
For use in Japan:  
Please use the power cord received with the product.  
The power cord received with this product is not for use with  
other products.  
User Guide  
C–5  
 
D
LCD Monitor Quality  
and Pixel Policy  
The TFT monitor uses high-precision technology, manufactured  
according to HP standards, to guarantee trouble-free  
performance. Nevertheless, the display may have cosmetic  
imperfections that appear as small bright or dark spots. This is  
common to all LCD displays used in products supplied by all  
vendors and is not specific to the HP LCD. These imperfections  
are caused by one or more defective pixels or sub-pixels.  
A pixel consists of one red, one green, and one blue  
sub-pixel.  
A defective whole pixel is always turned on (a bright spot on  
a dark background), or it is always off (a dark spot on a bright  
background). The first is the more visible of the two.  
A defective sub-pixel (dot defect) is less visible than a  
defective whole pixel and is small and only visible on a  
specific background.  
The HP display does not have more than:  
3 bright dots.  
5 dark dots.  
5 total bright and dark dots.  
No more than two adjacent (less than 25 mm edge-to-edge)  
defective pixels.  
User Guide  
D–1  
   
LCD Monitor Quality and Pixel Policy  
To locate defective pixels, the monitor should be viewed under  
normal operating conditions, in normal operating mode at a  
supported resolution and refresh rate, from a distance of  
approximately 50 cm (16 in.).  
HP expects that, over time, the industry will continue to improve  
its ability to produce LCDs with fewer cosmetic imperfections  
and HP will adjust guidelines as improvements are made.  
D–2  
User Guide  

HP Hewlett Packard Hewlett Packard Computer Monitor 2311X User Manual
GE CLIMATISEUR AEE23 User Manual
FUNAI CR202EM9 User Manual
Electrolux 200233 User Manual
AT T E5926 User Manual
Asus P5B VM User Manual
Asus K8V VM User Manual
Apple Logic Board User Manual
Apex Digital AD 1000 User Manual
Alto Shaam PLATINUM SERIES ASC 2E User Manual