HP Hewlett Packard HP 30 Zr30w S Ips LCD Monitor VM617A4RABA User Manual

HP ZR30w LCD Monitor  
User Guide  
About This Guide  
This guide provides information on setting up the monitor, installing drivers, using the on-screen display  
menu, troubleshooting and technical specifications.  
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily  
harm or loss of life.  
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage  
to equipment or loss of information.  
NOTE: Text set off in this manner provides important supplemental information.  
ENWW  
iii  
iv  
About This Guide  
ENWW  
Table of contents  
2 Safety and Maintenance Guidelines .............................................................................................................. 2  
3 Setting Up the Monitor ................................................................................................................................... 4  
4 Operating the Monitor .................................................................................................................................. 15  
ENWW  
v
Appendix B Technical Specifications ............................................................................................................ 21  
Appendix C Agency Regulatory Notices ....................................................................................................... 23  
Disposal of Waste Equipment by Users in Private Household in the European  
Appendix D LCD Monitor Quality and Pixel Policy ...................................................................................... 28  
vi  
ENWW  
1 Product Features  
HP ZR30w Model  
The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The monitor  
features include:  
29.7–inch (75.4 cm) viewable area display with 2560 x 1600 resolution  
Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side  
Tilt, swivel, and height adjustment capabilities  
Removable stand for flexible mounting solutions with HP Quick Release and VESA 100 mm  
mounting holes  
Video signal input to support DVI digital with DVI-D signal cable provided  
Video signal input to support DisplayPort digital with DisplayPort signal cable provided  
USB 2.0 hub with one upstream (connects to the computer) and four downstream (connects to  
USB devices) ports  
USB cable provided to connect the monitor's USB hub to the USB connector on the computer  
Supports the optional HP speaker bar (purchased separately)  
Plug and play capability if supported by the system  
Security slot provision on rear of monitor for optional cable lock  
Cable management feature for placement of cables and cords  
HDCP (High-Bandwidth Digital Content Protection) copy protection on DVI and DisplayPort inputs  
Software and documentation CD that includes monitor drivers and product documentation  
Energy saver feature to meet requirements for reduced power consumption  
EDID support for Asset Management  
Compliant with the following regulated specifications:  
European Union CE Directives  
Swedish MPR II 1990  
ENWW  
HP ZR30w Model  
1
   
2 Safety and Maintenance Guidelines  
Important Safety Information  
A power cord is included with the monitor. If another cord is used, use only a power source and  
connection appropriate for this monitor. For information on the correct power cord set to use with the  
monitor, refer to the Power Cord Set Requirements on page 25 in Appendix C.  
WARNING! To reduce the risk of electric shock or damage to the equipment:  
• Do not disable the power cord grounding feature. The grounding plug is an important safety feature.  
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.  
• Disconnect power from the product by unplugging the power cord from the electrical outlet.  
For your safety, do not place anything on power cords or cables. Arrange them so that no one may  
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical  
outlet, grasp the cord by the plug.  
To reduce the risk of serious injury, read the Safety and Comfort Guide. It describes proper workstation,  
setup, posture, and health and work habits for computer users, and provides important electrical and  
mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and/or on  
the documentation CD, if one is included with the monitor.  
CAUTION: For the protection of the monitor, as well as the computer, connect all power cords for the  
computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge  
protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips  
provide surge protection; the power strips must be specifically labeled as having this ability. Use a power  
strip whose manufacturer offers a Damage Replacement Policy so you can replace the equipment, if  
surge protection fails.  
Use the appropriate and correctly sized furniture designed to properly support your HP LCD monitor.  
WARNING! LCD monitors that are inappropriately situated on dressers, bookcases, shelves, desks,  
speakers, chests, or carts may fall over and cause personal injury.  
Care should be taken to route all cords and cables connected to the LCD monitor so that they can not  
be pulled, grabbed, or tripped over.  
2
Chapter 2 Safety and Maintenance Guidelines  
ENWW  
   
Maintenance Guidelines  
To enhance the performance and extend the life of the monitor:  
Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those  
controls that are covered in the operating instructions. If the monitor is not operating properly or  
has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider.  
Use only a power source and connection appropriate for this monitor, as indicated on the label/  
back plate of the monitor.  
Be sure the total ampere rating of the products connected to the outlet does not exceed the current  
rating of the electrical outlet, and the total ampere rating of the products connected to the cord does  
not exceed the rating of the cord. Look on the power label to determine the ampere rating (AMPS  
or A) for each device.  
Install the monitor near an outlet that you can easily reach. Disconnect the monitor by grasping the  
plug firmly and pulling it from the outlet. Never disconnect the monitor by pulling the cord.  
Turn the monitor off when not in use. You can substantially increase the life expectancy of the  
monitor by using a screen saver program and turning off the monitor when not in use.  
NOTE: Monitors with a “burned-in image” are not covered under the HP warranty.  
Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked  
or covered. Never push objects of any kind into cabinet slots or other openings.  
Do not drop the monitor or place it on an unstable surface.  
Do not allow anything to rest on the power cord. Do not walk on the cord.  
Keep the monitor in a well-ventilated area, away from excessive light, heat or moisture.  
When removing the monitor stand, you must lay the monitor face down on a soft area to prevent  
it from getting scratched, defaced, or broken.  
Cleaning the Monitor  
1. Turn off the monitor and unplug the power cord from the back of the unit.  
2. Dust the monitor by wiping the screen and the cabinet with a soft, clean antistatic cloth.  
3. For more difficult cleaning situations, use a 50/50 mix of water and Isopropyl alcohol.  
CAUTION: Spray the cleaner onto a cloth and use the damp cloth to gently wipe the screen surface.  
Never spray the cleaner directly on the screen surface. It may run behind the bezel and damage the  
electronics.  
CAUTION: Do not use cleaners that contain any petroleum based materials such as benzene, thinner,  
or any volatile substance to clean the monitor screen or cabinet. These chemicals may damage the  
monitor.  
Shipping the Monitor  
Keep the original packing box in a storage area. You may need it later if you move or ship the monitor.  
ENWW  
Maintenance Guidelines  
3
     
3 Setting Up the Monitor  
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other  
attached devices, then follow the instructions below.  
NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position.  
The master power switch turns off all power to the monitor.  
Installing the Monitor Pedestal Base  
NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other  
mounting fixture; instead see Mounting the Monitor on page 12 in this chapter.  
1. Using both hands, position the monitor over the pedestal base.  
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause non-  
uniformity of color or disorientation of the liquid crystals. If this occurs the screen will not recover  
to its normal condition.  
2. Press down firmly on the monitor to lock the pedestal base in place. When the base locks, it will  
make a clicking sound.  
Figure 3-1 Inserting the Monitor into the Pedestal Base  
NOTE: Be sure the pedestal base is securely locked before continuing with the setup.  
4
Chapter 3 Setting Up the Monitor  
ENWW  
   
Rear Components  
HP ZR30w Model  
Figure 3-2 Rear Components  
Table 3-1 Rear Components  
Component  
Function  
1
2
3
4
5
6
7
8
Cable Lock Provision  
Master Power Switch  
AC Power Connector  
DisplayPort Connector  
DVI-D Connector  
Provides slot for use with cable security locks.  
Turns off all power to the monitor.  
Connects the AC power cord to the monitor.  
Connects the DisplayPort cable to the monitor.  
Connects the DVI-D cable to the monitor.  
USB Upstream Connector  
USB Downstream Connectors  
Connects the monitor USB hub cable to a host USB port/hub.  
Connects optional USB devices to the monitor.  
Connects optional USB devices to the monitor.  
USB Downstream Connectors  
(side panel)  
ENWW  
Rear Components  
5
   
Routing and Connecting the Cables  
1. Place the monitor in a convenient, well-ventilated location near the computer.  
2. Remove the cable routing cover by pulling it straight off the front of the column.  
Figure 3-3 Removing the Cable Routing Cover  
3. Before connecting the cables, route them through the cable routing hole in the column (1) and  
replace the cable routing cover (2).  
Figure 3-4 Routing Cables  
4. Connect a DVI-D signal cable or DisplayPort signal cable.  
6
Chapter 3 Setting Up the Monitor  
ENWW  
 
NOTE: The video source is determined by the video cable used. The monitor will automatically  
determine which inputs have valid video signals. The inputs can be selected by pressing the Source  
button on the front panel .  
For DVI digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable  
to the DVI connector on the rear of the monitor and the other end to the DVI connector on the  
computer.  
For DisplayPort digital operation, use the DisplayPort signal cable provided. Connect the  
DisplayPort signal cable to the DisplayPort connector on the rear of the monitor and the other  
end to the DisplayPort connector on the computer.  
5. Connect one end of the provided USB cable to the USB hub connector on the rear panel of the  
computer, and the other end to the upstream USB connector on the monitor.  
6. Connect one end of the power cable to the AC power connector on the back of the monitor, and  
the other end to an electrical wall outlet.  
Figure 3-5 Connecting the Cables  
WARNING! To reduce the risk of electric shock or damage to the equipment:  
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.  
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.  
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.  
For your safety, do not place anything on power cords or cables. Arrange them so that no one may  
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical  
outlet, grasp the cord by the plug.  
ENWW  
Routing and Connecting the Cables  
7
Connecting USB Devices  
The monitor provides USB connectors on the side panel and on the rear panel that can be used to  
connect devices such as a digital camera, USB keyboard, or USB mouse.  
NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0  
ports on the monitor. Refer to Step 5 in Routing and Connecting the Cables on page 6.  
Figure 3-6 Connecting USB Devices  
Adjusting the Monitor  
1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level.  
Figure 3-7 Tilting the Monitor  
8
Chapter 3 Setting Up the Monitor  
ENWW  
   
2. Swivel the monitor to the left or right for the best viewing angle.  
Figure 3-8 Swiveling the Monitor  
3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position.  
A lock-down/release button on the back of the column prevents the display head from sliding up  
when the monitor is lifted. If the display head is locked in the lowest height position:  
a. Make sure that the monitor is safely positioned on a stable surface.  
b. Gently push down on the display head (1).  
c. While pushing down the display head, press the lock-down/release button on the back of the  
column (2).  
d. Guide the display head up to the desired height (3).  
Figure 3-9 Adjusting the Height  
ENWW  
Adjusting the Monitor  
9
Turning on the Monitor  
1. Ensure that the master power switch on the rear of the monitor is in the On position.  
2. Press the power button on the computer to turn it on.  
3. Press the power button on the front of the monitor to turn it on.  
CAUTION: Burn-in image damage may occur on monitors that display the same static image on  
screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you  
should always activate a screen saver application or turn off the monitor when it is not in use for a  
prolonged period of time. Image retention is a condition that may occur on all LCD screens. Monitors  
with a “burned-in image” are not covered under the HP warranty.  
* A prolonged period of time is 12 consecutive hours of non-use.  
The monitor automatically scans the signal inputs for an active input and uses that input for the display.  
If two inputs are active, the monitor will display the default input source. If the default source is not one  
of the active inputs, then the monitor will display the highest ranking priority input in the following order:  
DisplayPort, then DVI. You can change the default source by pressing the Source button on the front  
panel.  
10 Chapter 3 Setting Up the Monitor  
ENWW  
 
Removing the Monitor Pedestal Base  
You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm,  
or other mounting fixture (purchased separately).  
This monitor has a Quick Release mechanism that allows you to easily remove and replace the monitor  
panel to the pedestal base.  
CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the  
power and signal cables are both disconnected. Also disconnect any USB cables that are connected to  
the monitor.  
1. Disconnect the signal, power, and USB cables from the back of the monitor.  
2. Slide the Quick Release latch (1) on the pedestal base to the side (either right or left).  
3. Pull up on the monitor display head (2) to remove it from the base.  
Figure 3-10 Removing the Monitor from the Pedestal Base  
ENWW  
Removing the Monitor Pedestal Base 11  
 
Mounting the Monitor  
NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket.  
The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It  
allows you to quickly and securely attach the monitor panel to the mounting fixture.  
1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal  
Base on page 11 in the previous section.  
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To attach  
a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long screws are  
required (not provided with the monitor). Longer screws must not be used because they may  
damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant  
with the VESA standard and is rated to support the weight of the monitor display panel. For best  
performance, it is important to use the power and video cables provided with the monitor.  
2. Remove the Quick Release from the pedestal base by removing the four screws.  
Figure 3-11 Removing the HP Quick Release from the Pedestal Base  
12 Chapter 3 Setting Up the Monitor  
ENWW  
 
3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed  
from the Quick Release in the previous step.  
Figure 3-12 Installing the Quick Release  
CAUTION: The Quick Release can also be installed directly to a wall to mount the monitor panel.  
It is designed to support a maximum of up to 10.9 kg (24 lbs). If you are mounting to a wall, HP  
recommends that you consult with a qualified engineering, architectural, or construction  
professional to determine the appropriate type and quantity of mounting fasteners required for your  
application and to ensure that the mounting solution is properly installed to support applied loads.  
4. Insert the monitor panel into the Quick Release, and then press down firmly on the monitor to lock  
it in place. When the Quick Release locks, it will make a clicking sound.  
Figure 3-13 Inserting the Monitor Panel into the Quick Release  
ENWW  
Removing the Monitor Pedestal Base 13  
Locating the Rating Labels  
The rating labels on the monitor provide the spare part number, product number, and serial number.  
You may need these numbers when contacting HP about the monitor model. The rating labels are  
located on the rear panel of the monitor display head.  
Figure 3-14 Locating the Rating Labels  
Installing an HP/Kensington MicroSaver Security Cable  
Lock  
You can secure the monitor to a fixed object with an optional cable lock available from HP.  
14 Chapter 3 Setting Up the Monitor  
ENWW  
   
4 Operating the Monitor  
Software and Utilities  
The CD that comes with the monitor contains files you can install on the computer:  
an .INF (Information) file  
an .ICM (Image Color Matching) file  
additional software for the monitor model  
NOTE: If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP  
monitors support Web site. See Downloading from the Worldwide Web on page 16 in this chapter.  
The Information File  
The .INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor  
compatibility with the computer’s graphics adapter.  
This monitor is Microsoft Windows Plug and Play compatible and the monitor will work correctly without  
installing the .INF file. Monitor Plug and Play compatibility requires that the computer’s graphic card is  
VESA DDC2–compliant and that the monitor connects directly to the graphics card. Plug and Play does  
not work through separate BNC type connectors or through distribution buffers/boxes.  
The Image Color Matching File  
The .ICM files are data files that are used in conjunction with graphics programs to provide consistent  
color matching from monitor screen to printer, or from scanner to monitor screen. The .ICM file contains  
a monitor color system profile. This file is activated from within graphics programs that support this  
feature.  
NOTE: The ICM color profile is written in accordance with the International Color Consortium (ICC)  
Profile Format specification.  
ENWW  
Software and Utilities 15  
       
Installing the .INF and .ICM Files  
After you determine that you need to update, you can install the .INF and .ICM files from the CD or  
download them.  
Installing from the CD  
To install the .INF and .ICM files on the computer from the CD:  
1. Insert the CD in the computer CD-ROM drive. The CD menu is displayed.  
2. View the Monitor Driver Software Readme file.  
3. Select Install Monitor Driver Software.  
4. Follow the on-screen instructions.  
5. Ensure that the proper resolution and refresh rates appear in the Windows Display control panel.  
NOTE: You may need to install the digitally signed monitor .INF and .ICM files manually from the CD  
in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD.  
Downloading from the Worldwide Web  
To download the latest version of .INF and .ICM files from the HP monitors support Web site:  
1. Refer to http://www.hp.com/support and select the country region.  
2. Follow the links for the monitor to the support page and download page.  
3. Ensure the system meets the requirements.  
4. Download the software by following the instructions.  
16 Chapter 4 Operating the Monitor  
ENWW  
     
Front Panel Controls  
Table 4-1 Monitor Front Panel Controls  
Control  
Function  
1
2
3
Source  
Selects the video input (DisplayPort or DVI-D)  
Reduces the brightness setting.  
– (Minus)  
+ (Plus)  
Increases the brightness setting.  
NOTE: Pressing the + (Plus) and – (Minus) buttons at the same time enables or disables the Dynamic Contrast Ratio (DCR)  
function. When enabling the DCR function, the power LED will flash four times. When disabling the DCR function, the power LED  
will flash one time.  
4
5
Power  
Turns the monitor on or off.  
Power LED  
Sleep mode — amber  
Continuous flashing blue — non-supported video mode  
Three flashes of blue — upper or lower limit of brightness control  
Four flashes of blue — DCR is enabled  
One flash of blue — DCR is disabled  
Steady blue — full power and monitor is displaying a supported mode (LED automatically turns off after  
30 seconds)  
NOTE: The monitor does not support an On-Screen Display (OSD) menu.  
ENWW  
Front Panel Controls 17  
 
Dynamic Contrast Ratio (DCR)  
Contrast ratio is the ratio between the brightest white and the darkest black produced by a monitor  
display. DCR increases contrast ratio by automatically adjusting the backlight based on image content.  
The higher contrast ratio is achieved dynamically over several frames.  
NOTE: DCR should only be enabled when viewing video full screen.  
The default setting for DCR is disabled. To enable DCR, press the + (Plus) and – (Minus) buttons on  
the front panel at the same time. The power LED will flash four times. To disable DCR, press the + (Plus)  
and – (Minus) buttons on the front panel again. The power LED will flash one time.  
18 Chapter 4 Operating the Monitor  
ENWW  
 
A Troubleshooting  
Solving Common Problems  
The following table lists possible problems, the possible cause of each problem, and the recommended  
solutions.  
Problem  
Possible Cause  
Solution  
Screen is blank and no LED.  
Power cord is disconnected.  
Connect the power cord.  
Master power switch is turned Set the master power switch on the rear panel of the  
off.  
monitor to the On position and press the front panel  
power button.  
Power button on front panel of Press the front panel power button.  
the monitor is turned off.  
Video cable is improperly  
connected.  
Connect the video cable properly. Refer to Setting  
Up the Monitor on page 4 for more information.  
Screen blanking is active.  
Press any key on the keyboard or move the mouse  
to inactivate the screen blanking utility.  
Brightness is too high or low.  
Brightness adjustment is not  
set correctly.  
Adjust the brightness setting using the – (Minus) and  
+ (Plus) buttons.  
Online Technical Support  
For the online access to technical support information, self-solve tools, online assistance, community  
forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to  
Preparing to Call Technical Support  
If you cannot solve a problem using the troubleshooting tips in this section, you may need to call technical  
support. Have the following information available when you call:  
Monitor model number  
Monitor serial number  
Purchase date on invoice  
Conditions under which the problem occurred  
Error messages received  
ENWW  
Solving Common Problems 19  
       
Hardware configuration  
Name and version of the hardware and software you are using  
20 Appendix A Troubleshooting  
ENWW  
B Technical Specifications  
NOTE: All performance specifications are provided by the component manufacturers. Performance  
specifications represent the highest specification of all HP's component manufacturers' typical level  
specifications for performance and actual performance may vary either higher or lower.  
ZR30w Model  
Table B-1 ZR30w Specifications  
Display  
75.4 cm wide screen  
TFT LCD  
29.7 inches wide screen  
29.7–inch diagonal  
Type  
Viewable Image Size  
Tilt  
75.4 cm diagonal  
-5° to 35°  
Swivel  
-45° to 45°  
Maximum Weight (Unpacked)  
Dimensions (include base)  
Height (highest position)  
Height (lowest position)  
Depth  
13 kg  
28.6 lbs.  
58.9 cm  
23.19 inches  
19.25 inches  
10.87 inches  
27.32 inches  
48.9 cm  
27.6 cm  
69.4 cm  
Width  
Maximum Graphic Resolution  
Optimum Graphic Resolution  
Safe Mode  
2560 x 1600 (60 Hz) digital input  
2560 x 1600 (60 Hz) digital input  
1280 × 800  
Dot Pitch  
0.25 (H) x 0.25 (W) mm  
101 PPI  
Pixels Per Inch  
Horizontal Frequency  
Vertical Refresh Rate  
Environmental Requirements Temperature  
100 kHz  
60 Hz  
5 to 35° C  
-20 to 60° C  
10 to 80%  
41 to 95° F  
-4 to 140° F  
Operating Temperature  
Storage Temperature  
Relative Humidity  
ENWW  
ZR30w Model 21  
   
Table B-1 ZR30w Specifications (continued)  
Power Source  
100 – 240 VAC, 50/60 Hz  
Altitude:  
0 to 5000 m  
0 to 16,400 feet  
0 to 40,000 feet  
Operating  
0 to 12192 m  
Storage  
Measured Power Consumption:  
Full Power  
<185 watts  
<130 watts  
<2 watts  
Typical Settings  
Sleep  
<1 watt  
Bezel Switch Off  
Input Terminal  
One DVI connector with cable included;  
one DisplayPort connector with cable  
included  
Energy Saver Feature  
When the monitor is in its normal operating mode, the monitor uses less than 130 watts and the Power  
light is blue.  
The monitor also supports a reduced power state. The reduced power state will be entered into if the  
monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon  
detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and  
the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize  
less than 2 watts of power. There is a brief warm up period before the monitor will return to its normal  
operating mode.  
Refer to the computer manual for instructions on setting energy saver features (sometimes called power  
management features).  
NOTE: The above power saver feature only works when connected to computers that have energy  
saver features.  
22 Appendix B Technical Specifications  
ENWW  
 
C Agency Regulatory Notices  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful  
interference in a residential installation. This equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no guarantee that interference will not occur  
in a particular installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is encouraged to try  
to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio or television technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or modifications made to this device that are  
not expressly approved by Hewlett Packard Company may void the user's authority to operate the  
equipment.  
Cables  
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods  
to maintain compliance with FCC Rules and Regulations.  
Declaration of Conformity for Products Marked with the  
FCC Logo (United States Only)  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including interference that may cause  
undesired operation.  
For questions regarding the product, contact:  
ENWW  
Federal Communications Commission Notice 23  
         
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call 1-800-HP-INVENT (1-800 474-6836)  
For questions regarding this FCC declaration, contact:  
Hewlett Packard Company  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call (281) 514-3333  
To identify this product, refer to the Part, Series, or Model number found on the product.  
Canadian Notice  
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment  
Regulations.  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel  
brouilleur du Canada.  
European Union Regulatory Notice  
This product complies with the following EU Directives:  
Low Voltage Directive 2006/95/EC  
EMC Directive 2004/108/EC  
Compliance with these directives implies conformity to applicable harmonized European standards  
(European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for  
this product or product family.  
This compliance is indicated by the following conformity marking placed on the product:  
This marking is valid for non-Telecom  
This marking is valid for EU non-  
products and EU harmonized Telecom harmonized Telecom products.  
products (e.g. Bluetooth)  
*Notified body number (used only if  
applicable — refer to the product label).  
24 Appendix C Agency Regulatory Notices  
ENWW  
     
Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany  
The official EU CE declaration of conformity for this device may be found at http://www.hp.com/go/  
German Ergonomics Notice  
HP products which bear the “GS” approval mark, when forming part of a system comprising HP brand  
computers, keyboards and monitors that bear the “GS” approval mark, meet the applicable ergonomic  
requirements. The installation guides included with the products provide configuration information.  
Japanese Notice  
Korean Notice  
Power Cord Set Requirements  
The monitor power supply is provided with Automatic Line Switching (ALS). This feature allows the  
monitor to operate on input voltages between 100–120V or 200–240V.  
The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use  
in the country where you purchased the equipment.  
If you need to obtain a power cord for a different country, you should purchase a power cord that is  
approved for use in that country.  
The power cord must be rated for the product and for the voltage and current marked on the product's  
electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and  
current rating marked on the product. In addition, the cross-sectional area of the wire must be a minimum  
of 0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8 m) and 12 feet (3.6 m).  
If you have questions about the type of power cord to use, contact an authorized HP service provider.  
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon  
it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the  
cord exits from the product.  
ENWW  
German Ergonomics Notice 25  
       
Japanese Power Cord Requirements  
For use in Japan, use only the power cord received with this product.  
CAUTION: Do not use the power cord received with this product on any other products.  
Product Environmental Notices  
Materials Disposal  
This HP product contains mercury in the fluorescent lamp in the display LCD that might require special  
handling at end-of-life.  
Disposal of this material can be regulated because of environmental considerations. For disposal or  
recycling information, contact the local authorities or the Electronic Industries Alliance (EIA)  
Disposal of Waste Equipment by Users in Private Household in the  
European Union  
This symbol on the product or on its packaging indicates that this product must not be disposed of with  
your household waste. Instead, it is your responsibility to dispose of your waste equipment by handing  
it over to a designated collection point for the recycling or waste electrical and electronic equipment.  
The separate collection and recycling of your waste equipment at the time of disposal will help to  
conserve natural resources and ensure that it is recycled in a manner that protects human health and  
the environment. For more information about where you can drop off your waste equipment for recycling,  
please contact the local city office, the household waste disposal service or the shop where you  
purchased the product.  
HP Recycling Program  
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and  
rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/  
Chemical Substances  
HP is committed to providing our customers with information about the chemical substances in our  
products as needed to comply with legal requirements such as REACH (Regulation EC No 1907/2006  
of the European Parliament and Council). A chemical information report for this product can be found  
Restriction of Hazardous Substances (RoHS)  
A Japanese regulatory requirement, defined by specification JIS C 0950, 2005, mandates that  
manufacturers provide Material Content Declarations for certain categories of electronic products  
offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, visit  
26 Appendix C Agency Regulatory Notices  
ENWW  
             
11363-2006  
11363-2006  
Turkey EEE Regulation  
In Conformity with the EEE Regulation  
EEE Yönetmeliğine Uygundur  
ENWW  
Product Environmental Notices 27  
 
D LCD Monitor Quality and Pixel Policy  
The TFT monitor uses high-precision technology, manufactured according to HP standards, to  
guarantee trouble-free performance. Nevertheless, the display may have cosmetic imperfections that  
appear as small bright or dark spots. This is common to all LCD displays used in products supplied by  
all vendors and is not specific to the HP LCD. These imperfections are caused by one or more defective  
pixels or sub-pixels.  
A pixel consists of one red, one green, and one blue sub-pixel.  
A defective whole pixel is always turned on (a bright spot on a dark background), or it is always off  
(a dark spot on a bright background). The first is the more visible of the two.  
A defective sub-pixel (dot defect) is less visible than a defective whole pixel and is small and only  
visible on a specific background.  
To locate defective pixels, the monitor should be viewed under normal operating conditions, in normal  
operating mode at a supported resolution and refresh rate, from a distance of approximately 50 cm (20  
in).  
HP expects that, over time, the industry will continue to improve its ability to produce LCDs with fewer  
cosmetic imperfections and HP will adjust guidelines as improvements are made.  
28 Appendix D LCD Monitor Quality and Pixel Policy  
ENWW  
 

GE JGP319 User Manual
GE General Electric Cooktop PP962 User Manual
GE 00004236 User Manual
Furuno SEARCHLIGHT SONAR CH 250 User Manual
Electrolux 260511 User Manual
Electrolux 66300KF an User Manual
Cypress CY7C09189V User Manual
Cypress CY7C1410AV18 User Manual
Cadco LINE CHEF XAF 130 User Manual
AEG 2460 D User Manual