Fujitsu Systemboard D1382 User Manual

COMPONENT  
.com  
Technisches Handbuch / Technical Manual  
Systembaugruppe / Systemboard D1382  
Dieses Handbuch wurde auf Recycling-Papier gedruckt.  
This manual has been printed on recycled paper.  
Ce manuel est imprimé sur du papier recyclé.  
Este manual ha sido impreso sobre papel reciclado.  
Questo manuale è stato stampato su carta da riciclaggio.  
Denna handbok är tryckt på recyclingpapper.  
Dit handboek werd op recycling-papier gedrukt.  
Herausgegeben von/Published by  
Fujitsu Siemens Computers GmbH  
Bestell-Nr./Order No.: A26361-D1382-Z120-1-7419  
Printed in the Federal Republic of Germany  
AG 0402 04/02  
A26361-D1382-Z120-1-7419  
German  
English  
Systembaugruppe  
D1387  
System Board D1387  
Technisches Handbuch  
Technical Manual  
Ausgabe April 2002  
April 2002 edition  
Pentium and Celeron are registered trademarks of Intel Corporation, USA.  
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.  
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.  
All other trademarks referenced are trademarks or registered trademarks of their respective  
owners, whose protected rights are acknowledged.  
Copyright Fujitsu Siemens Computers GmbH 2002  
All rights, including rights of translation, reproduction by printing, copying or similar methods,  
in part or in whole, are reserved.  
Offenders will be liable for damages.  
All rights, including rights created by patent grant or registration of a utility model or design,  
are reserved.  
Delivery subject to availability. Right of technical modification reserved.  
This manual was produced by  
cognitas. Gesellschaft für Technik-Dokumentation mbH  
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA.  
Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.  
PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc.  
All other trademarks referenced are trademarks or registered trademarks of their respective  
owners, whose protected rights are acknowledged.  
All rights, including rights of translation, reproduction by printing, copying or similar methods,  
even of parts are reserved.  
Offenders will be liable for damages.  
All rights, including rights created by patent grant or registration of a utility model or design,  
are reserved. Delivery subject to availability.  
Right of technical modification reserved.  
This manual was produced by  
cognitas. Gesellschaft für Technik-Dokumentation mbH  
Contents  
Introduction........................................................................................................................................1  
Notational conventions ..............................................................................................................1  
Important notes..................................................................................................................................1  
Information about boards...........................................................................................................2  
Features ............................................................................................................................................3  
External ports ............................................................................................................................4  
Internal ports and connectors ....................................................................................................5  
Temperature / System monitoring..............................................................................................6  
Hard disk connection .................................................................................................................7  
LAN connector...........................................................................................................................7  
Screen resolution.......................................................................................................................8  
PCI bus interrupts......................................................................................................................8  
Settings with switches and jumpers...................................................................................................9  
Recovering System BIOS - switch 2..........................................................................................9  
Add-on modules ..............................................................................................................................10  
Installing and removing processors..........................................................................................11  
Upgrading main memory..........................................................................................................12  
Replacing the lithium battery....................................................................................................13  
Glossary ..........................................................................................................................................14  
A26361-D1382-Z120-1-7419  
Introduction  
Depending on the configuration chosen, some of the hardware components described  
may not be available on your system board.  
i
You will find further information in the "BIOS Setup" description.  
Further information about drivers is provided in the readme files on the hard disk, on the supplied  
drivers diskettes, on the "Drivers & Utilities" or on the "ServerStart" CD.  
Notational conventions  
The meanings of the symbols and fonts used in this manual are as follows:  
Pay particular attention to text marked with this symbol. Failure to observe this warning  
endangers your life, destroys the device, or may lead to loss of data.  
!
Supplementary information, remarks, and tips follow this symbol.  
i
Ê
Text which follows this symbol describes activities that must be performed in the order shown.  
This symbol indicates that you must enter a blank space (press the Space Bar) at this point.  
This symbol indicates that you must press the Enter key.  
Ë
Ú
Text in this typefaceindicates screen outputs.  
Text in this bold typefaceindicates the entries you make via the keyboard.  
Text in italics indicates commands or menu items.  
"Quotation marks" indicate names of chapters or terms.  
Important notes  
Store this manual close to the device. If you pass the device on to third parties, you should pass this  
manual on with it.  
Be sure to read this page carefully and note the information before you open the device.  
!
You cannot access the system board components without first opening the device. How  
to dismantle and reassemble the device is described in the Operating Manual  
accompanying the device.  
Please observe the safety information provided in the "Important notes" chapter in the  
device’s operating manual.  
Incorrect replacement of the lithium battery may lead to a risk of explosion. It is therefore  
essential to observe the instructions in the "Add-on modules" - "Replacing the lithium  
battery" section.  
A26361-D1382-Z120-1-7419  
English - 1  
Important notes  
The shipped version of this board complies with the requirements of the EEC  
directive 89/336/EEC "Electromagnetic compatibility".  
Compliance was tested in a typical PC configuration.  
When installing the board, refer to the specific installation information in the  
Operating Manual or Technical Manual for the receiving device.  
Connecting cables for peripherals must be adequately shielded to avoid interference.  
Components can become very hot during operation. Ensure you do not touch  
components when making extensions to the system board. There is a danger of burns!  
!
The warranty is invalidated if the device is damaged during the installation or  
replacement of system expansions. Information on which system expansions you can  
use is available from your sales outlet or the customer service centre.  
i
Information about boards  
To prevent damage to the system board or the components and conductors on it, please take great  
care when you insert or remove boards. Take great care to ensure that extension boards are slotted  
in straight, without damaging components or conductors on the system board, or any other  
components, for example EMI spring contacts.  
Be especially careful with the locking mechanisms (catches, centring pins etc.) when you replace  
the system board or components on it, for example memory modules or processors.  
Never use sharp objects (screwdrivers) for leverage.  
Boards with electrostatic sensitive devices (ESD) are identifiable by the  
label shown.  
When you handle boards fitted with ESDs, you must, under all  
circumstances, observe the following points:  
S
You must always discharge static build up (e.g. by touching a  
grounded object) before working.  
S
S
The equipment and tools you use must be free of static charges.  
Remove the power plug from the mains supply before inserting or  
removing boards containing ESDs.  
S
S
Always hold boards with ESDs by their edges.  
Never touch pins or conductors on boards fitted with ESDs.  
2 - English  
A26361-D1382-Z120-1-7419  
Features  
Features  
The components and connectors marked are not necessarily present on the system board.  
S
S
System board in µATX format  
Intel processor Pentium 4 from 1.4 GHz and with 400 /533 MHz Front Side Bus.  
Pentium 4 processors support MMX technology and Intel Streaming SIMD Extensions. The size and  
frequency of first-level cache and second-level cache are dependent upon the processor used.  
S
S
Intel chipset 845G  
Intel 82562 LAN controller (10/100 Mbit/s) with RJ45 interface  
WOL with Magic Packetis supported, as is booting from LAN with InCom LAN BootP or Intel  
PXE.  
S
S
VGA: 24 bit and 350 MHz RAMDAC; Dynamic Video Memory (DVM)  
Analogue Devices AD1981A (AC'97) Audio Codec  
internal: Stereo CD-In, Audio front panel  
external: Mono Micro-In, Stereo Line-In, Stereo Line-Out  
S
2 DIMM slots for 128 MB up to 2 GB main memory (DDR-DIMM memory modules meet the  
PC2100 specification) without ECC  
S
S
S
Fujitsu Siemens Computers Systemüberwachung und Temperaturüberwachung  
Flash BIOS  
Power-on functions:  
Wake on RTC  
Wake on LAN  
Wake on PCI Cards  
Wake on USB  
COM1 wake up support (standby)  
S
S
Energy saving functions:  
APM and ACPI (requires an operating system that supports ACPI)  
Switching on/off, standby mode, suspend mode via on/off switch  
Switching on/off via software  
Security functions:  
Processor serial number  
Cover monitoring: cover monitoring reports when the cover has been opened without  
authorisation.  
System, Setup and Keyboard password  
parallel and serial ports can be deactivated  
Floppy disk write-protection via BIOS Setup  
Boot hard disk virus warning function  
Flash BIOS and EEPROMs (on the memory modules) virus protection function.  
S
3 PCI slots  
PCI slots support 3.3 V main and auxiliary voltages.  
A26361-D1382-Z120-1-7419  
English - 3  
Features  
S
S
1 AGP slot  
The AGP slot supports 4x AGP mode. Only AGP boards with 1.5 V are supported.  
IDE hard disk controller connected to PCI bus for up to four IDE drives  
(e.g. IDE hard disk drives, ATAPI CD-ROM drives)  
The IDE hard disk controller are ATA100, ultra DMA capable and support PIO modes 0-4.  
S
S
S
S
S
S
S
S
S
Floppy disk drive controller (possible formats: 720 KB, 1.44 MB, 2.88 MB)  
The system board supports booting from a 120 MB IDE floppy disk drive.  
Real-time clock/calendar with integrated battery backup  
4 internal USB ports (C / D and E / F)  
1 internal serial port for chipcard reader (SmartCard reader).  
1 external parallel port (ECP- and EPP-compatible)  
1 external serial port (16C550 compatible with FIFO)  
2 external PS/2 ports for keyboard and mouse  
2 external USB ports (A / B)  
External ports  
1 3  
4
5
6
7
8a  
8b  
8c  
2
1 = PS/2 mouse port  
2 = PS/2 keyboard port  
3 = Serial port  
7 = USB ports A and B  
8a = Audio Line-Out  
Headphones  
4 = Parallel port  
5 = VGA  
8b = Audio Line-In  
8c = Audio Micro-In  
6 = LAN connector  
The components and connectors marked are not necessarily present on the system board.  
4 - English  
A26361-D1382-Z120-1-7419  
Features  
Internal ports and connectors  
7
1
2 3 4  
5
6
8
9
10  
11  
12  
DIMM 2  
DIMM 1  
17  
13  
15 14  
16  
13  
1 = Power supply ATX  
2 = Floppy Disk Drive  
10 =  
11 =  
12 =  
13 =  
14 =  
15 =  
16 =  
17 =  
18 =  
LCD display  
USB ports C / D  
USB ports E / F  
COM2  
SP/DIF (digital Audio)  
Audio front panel  
CD audio input  
3 = IDE drives 3 and 4 (secondary)  
4 = Power supply monitoring  
5 = Connector for front panel  
6 = IDE drives 1 and 2 (primary)  
7 = Fan 2  
8 = OEM LED  
9 = Cover monitoring  
Power supply  
Fan 1 (e.g. for the processor)  
The components and connectors marked are not necessarily present on the system board.  
A26361-D1382-Z120-1-7419  
English - 5  
Features  
Temperature / System monitoring  
Temperature and system monitoring aim to reliably protect the computer hardware against damage  
caused by overheating. In addition, any unnecessary noise is also prevented by reducing the fan  
speed, and information is provided about the system status. Cover monitoring protects the system  
from unauthorised opening.  
An onboard controller developed by Fujitsu Siemens Computers controls the temperature and  
system monitoring.  
The following functions are supported:  
Temperature monitoring:  
Measurement of the processor and the system temperature with an onboard temperature sensor.  
Temperature control:  
The temperature is controlled by adjusting the fan speed and/or by reducing the clock frequency of  
the processor. The clock frequency of the processor is dependent upon the setting in the BIOS Setup.  
Temperature-dependent processor speed control enables a reduced fan speed, decreasing noise.  
Fan monitoring:  
Fans which have been removed, blocked or sticky fans are detected. Blocked or sticky fans are  
operated with 12 V pulse voltage. If the device has a monitored fan removed while the system is  
switched off this is indicated by the message LED when the system is switched on again and  
processed by the BIOS or the application.  
Fan control:  
With the exception of the auxiliary fan (AUX), the fans are regulated according to temperature.  
Sensor monitoring:  
The removal of, or a fault in, a temperature sensor is detected. Should this happen all fans  
monitored by this sensor run at maximum speed, to achieve the greatest possible protection of the  
hardware. If the device has a monitored fan removed while the system is switched off this is  
indicated by the message LED when the system is switched on again and processed by the BIOS or  
the application.  
Cover monitoring:  
Unauthorised opening of the cover is detected, even when the system is switched off. However, this  
will only be indicated when the system is switched on again.  
6 - English  
A26361-D1382-Z120-1-7419  
Features  
Voltage monitoring:  
The voltages 12 V, 5 V and the CMOS battery are monitored.  
With hardware monitoring - regardless of the operating system and processor - the advantages  
compared to conventional software monitoring are clear:  
suitable for all operating systems and processor types  
no additional load on processor (performance)  
optimum temperature protection, even if process faults or faults are present in the  
operating system  
optimum noise reduction  
Three different operating modes are available and can be configured in BIOS Setup - System  
Management.  
Hard disk connection  
An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for  
the ultra ATA/66or ultra ATA/100 mode.  
Ê
Connect the end of the cable marked with blue to the system board.  
LAN connector  
This system board has an optional Intel 82550EM LAN controller which supports transfer speeds of  
10 Mbit/s and 100 Mbit/s. The LAN controller is equipped with a 3 KB transmission and receiving  
buffer (FIFO) and supports WOL function through Magic Packet.  
It is also possible to boot a device without its own boot hard disk via LAN. Here Bootix LAN BootP  
and Intel PXE are supported.  
Basic AOL II is also supported. Basic AOL II helps to protect systems against theft or damage.  
Basic AOL II can also inform the administrator about hardware faults and software errors.  
The LAN RJ45 connector is equipped with a yellow and a green LED (light emitting diode).  
1 = a connection exists (e.g. to a hub).  
2 = Link Mode: the LAN connection is active.  
2
1
WOL mode: a Magic PacketTM is being  
received.  
A26361-D1382-Z120-1-7419  
English - 7  
Features  
Screen resolution  
Depending on the operating system used, the screen resolutions in the following table refer to the  
system board screen controller.  
If you are using an external screen controller, you will find details of supported screen resolutions in  
the Operating Manual or Technical Manual supplied with the controller.  
Screen resolution  
1024 x 768  
Refresh rate (Hz)  
bpp  
Colour  
120  
100  
85  
32  
32  
32  
16 bit  
16 bit  
16 bit  
1280 x 1024  
1600 x 1200  
PCI bus interrupts  
The following table shows which PCI bus interrupts are assigned on the system board.  
PCI bus interrupt  
Component on system board:  
PCI bus slot 1  
PCI bus slot 2  
PCI bus slot 3  
PCI bus slot 4  
PCI bus slot 5  
PCI bus slot 6  
AGP slot  
First USB controller  
Second USB controller  
LAN controller  
SMBus  
B, C, D, A  
C, D, A, B  
D, A, B, C  
E, F, G, H  
F, G, H, A  
G, H, A, B  
A, B  
D
H
E
B
B
AC'97 Audio  
8 - English  
A26361-D1382-Z120-1-7419  
Settings with switches and jumpers  
Settings with switches and jumpers  
Switch 1 = must always be set to off  
Switch 2 = System BIOS recovery  
Switch 3 = must always be set to off  
Switch 4 = must always be set to off  
ON  
1
2
3
4
The clock frequency of the processor is set automatically.  
i
Recovering System BIOS - switch 2  
Switch 2 enables recovery of the old system BIOS after an attempt to update has failed. To restore  
the old system BIOS you need a Flash BIOS Diskette (please call our customer service centre).  
On  
The System BIOS executes from floppy drive A: and the inserted "Flash-BIOS-  
Diskette" restores the System BIOS on the system board.  
Off  
Normal operation (default setting).  
A26361-D1382-Z120-1-7419  
English - 9  
Add-on modules  
Add-on modules  
Exit Suspend mode, switch off the device and remove the power plug from the mains  
supply, before carrying out any of the procedures described in this chapter!  
Even when you have switched off the device, parts (e.g. memory modules, AGP and PCI  
extension boards) are still supplied with power.  
!
All PCI slots support 3.3 V main and auxiliary voltages. AGP boards support 1,5 V main  
and auxiliary voltages.  
4
DIMM 2  
3
2
DIMM 1  
1
5
6
1 = Socket for processor with heat sink  
2 = Location bank 1 for main memory  
3 = Location bank 2 for main memory  
4 = Lithium battery  
5 = PCI slots 1, 2, 3  
6 = AGP slot  
10 - English  
A26361-D1382-Z120-1-7419  
Add-on modules  
Installing and removing processors  
2
3
1
4
5
A
Ê
Ê
Ê
Pull the lever in the direction of the arrow (1) and lift it as far as it will go (2).  
Remove the old processor from the socket (3).  
Insert the new processor in the socket so that the angled corner of the processor matches the  
coding on the socket (A) with regard to the position (4).  
The angled corner of the processor may be covered by the heat sink. In this case let  
yourself be guided by the marking in the rows of pins on the underside of the processor.  
!
Ê
Push the lever back down until it clicks into place (5).  
A26361-D1382-Z120-1-7419  
English - 11  
Add-on modules  
Upgrading main memory  
These slots are suitable for 128, 256, 512 and 1024 Mbyte DDR memory modules of the DIMM  
format.  
Memory modules with different memory capacities can be combined.  
You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not  
supported.  
!
DDR-DIMM memory modules must meet the PC2100 specification.  
Installing a memory module  
2
2
Ê
Ê
Ê
Push the holders on each side of the memory compartment outwards.  
Insert the memory module into the location (1).  
At the same time flip the lateral holders upwards until the memory module snaps in place (2).  
Removing a memory module  
1
1
Ê
Ê
Push the clips on the right and left of the compartment outward (1).  
Carefully remove the memory module from the compartment (2).  
12 - English  
A26361-D1382-Z120-1-7419  
Add-on modules  
Replacing the lithium battery  
Incorrect replacement of the lithium battery may lead to a risk of explosion.  
!
The lithium battery must be replaced with an identical battery or a battery type  
recommended by the manufacturer (CR2032).  
Do not throw lithium batteries into the household waste. They must be disposed of in  
accordance with local regulations concerning special waste.  
Ensure that you insert the battery the right way round. The plus pole must be on the top!  
The following graphic representation is also valid if the lithium battery is built-in vertically.  
1
+
+
3
2
+
+
Ê
Ê
Lift the contact (1) a few millimetres and remove the battery from its socket (2).  
Insert a new lithium battery of the same type into the socket (3).  
A26361-D1382-Z120-1-7419  
English - 13  
Glossary  
Glossary  
The technical terms and abbreviations given below represent only a selection of the full list of  
common technical terms and abbreviations.  
Not all technical terms and abbreviations listed here are valid for the described system board.  
ACPI  
Advanced Configuration and  
Power Management Interface  
Audio Codec '97  
Accelerated Graphics Port  
Audio Modem Riser  
ISA  
Industrial Standard Architecture  
AC'97  
AGP  
AMR  
AOL  
APM  
ATA  
LAN  
LSA  
MCH  
MMX  
P64H  
PCI  
Local Area Network  
LAN Desk Service Agent  
Memory Controller Hub  
MultiMedia eXtension  
PCI64 Hub  
Peripheral Component  
Interconnect  
Alert On LAN  
Advanced Power Management  
Advanced Technology  
Attachment  
BIOS  
CAN  
CPU  
Basic Input Output System  
Controller Area Network  
Central Processing Unit  
PXE  
RAM  
RAMDAC  
Preboot eXecution Environment  
Random Access Memory  
Random Access Memory Digital  
Analogue Converter  
CNR  
Communication Network Riser  
RDRAM  
RIMM  
Rambus Dynamic Random  
Access Memory  
Rambus Inline Memory Module  
C-RIMM  
Continuity Rambus Inline  
Memory Module  
DIMM  
ECC  
EEPROM  
Dual Inline Memory Module  
Error Correcting Code  
Electrical Erasable  
Programmable Read Only  
Memory  
RTC  
SB  
SDRAM  
Real Time Clock  
Soundblaster  
Synchronous Dynamic Random  
Access Memory  
FDC  
Floppy Disk Controller  
SGRAM  
SIMD  
Synchronous Graphic Random  
Access Memory  
FIFO  
FSB  
First-In First-Out  
Front Side Bus  
Streaming Mode Instruction  
(Single Instruction Multiple Data)  
System Management Bus  
FWH  
GMCH  
Firmware Hub  
Graphics and Memory Controller  
Hub  
SMBus  
SVGA  
Super Video Graphic Adapter  
GPA  
Graphics Performance  
Accelerator  
Inter Integrated Circuit  
Instantly Available Power  
Managed Desktop PC Design  
I/O Controller Hub  
USB  
Universal Serial Bus  
I2C  
IAPC  
VGA  
WOL  
Video Graphic Adapter  
Wake On LAN  
ICH  
IDE  
IPSEC  
Intelligent Drive Electronics  
Internet Protocol Security  
14 - English  
A26361-D1382-Z120-1-7419  

Hitachi DV W1U User Manual
Hanns G HQ 191DPB User Manual
Freescale Semiconductor Computer Hardware S08 User Manual
Emerson AV510 User Manual
Elo TouchSystems Elo Entuitive 3000 Series 1939L User Manual
Electrolux 584143 User Manual
Cortelco Caller ID Type II 9125 User Manual
Asus Desktop Motherboard F2A85 M User Manual
AOC Computer Monitor 2217PWC User Manual
AG Neovo TV 01 User Manual