Fisher Paykel Cooktop CI754DTB User Manual

Induction cooktop  
CI302DTB, CI603DTB, CI604DTB,  
CI754DTB & CI905DTB models  
User guide  
NZ AU GB IE  
1
Contents  
Safety and warnings  
Introduction  
2
8
Choosing the right cookware  
Using your induction cooktop  
Using your cooktop’s special features  
Cooking guidelines  
Care and cleaning  
Troubleshooting  
9
10  
16  
29  
32  
33  
35  
Warranty and service  
Important!  
SAVE THESE INSTRUCTIONS  
The models shown in this user guide may not be available in all markets and are  
subject to change at any time. For current details about model and specification  
availability in your country, please visit our local website listed on the back cover  
or contact your local Fisher & Paykel dealer.  
2
Safety and warnings  
Operation and maintenance  
WARNING!  
Electrical Shock Hazard  
Do not cook on a broken or cracked  
cooktop. If the cooktop surface should  
break or crack, switch the appliance off  
immediately at the mains power  
supply (wall switch) and contact a  
qualified technician.  
Switch the cooktop off at the wall before  
cleaning or maintenance.  
Failure to follow this advice may result  
in electrical shock or death.  
WARNING!  
Fire Hazard  
Unattended cooking on a hob with fat  
or oil can be dangerous and may result  
in fire.  
NEVER try to extinguish a fire with  
water, but switch off the appliance and  
cover flame, eg with a lid or fire blanket.  
Do not store items on cooking surfaces.  
Failure to follow this advice may result  
in serious burns or death.  
3
Safety and warnings  
WARNING!  
Health Hazard  
This appliance complies with  
electromagnetic safety standards.  
However, persons with cardiac  
pacemakers or other electrical  
implants (such as insulin pumps)  
must consult with their doctor or  
implant manufacturer before using  
this appliance to make sure that their  
implants will not be affected by the  
electromagnetic field.  
Failure to follow this advice may result  
in death.  
4
Safety and warnings  
Operation and maintenance  
WARNING!  
Hot Surface Hazard  
During use, accessible parts of this  
appliance will become hot enough to  
cause burns.  
Do not let body, clothing or any item  
other than suitable cookware contact  
with the ceramic glass until the surface  
is cool.  
Never leave metal objects (such as  
kitchen utensils) or empty pans on the  
cooktop as they can become hot very  
quickly.  
Beware: magnetisable metal objects  
worn on the body may become hot in  
the vicinity of the cooktop. Gold or silver  
jewellery will not be affected.  
Keep children away.  
Handles of saucepans may be hot to  
touch. Check saucepan handles do not  
overhang other cooking zones that are  
on. Keep handles out of reach of  
children.  
Failure to follow this advice could result  
in burns and scalds.  
5
Safety and warnings  
Important safety instructions  
Never leave the appliance unattended when  
in use. Boilover causes smoking and greasy  
spillovers that may ignite.  
Never use your appliance as a work or storage  
surface.  
Never leave any objects or utensils on the  
appliance.  
Do not place or leave any magnetisable objects  
(eg credit cards, memory cards) or electronic  
devices (eg computers, MP3 players) near  
the appliance, as they may be affected by its  
electromagnetic field.  
We recommend using plastic or wooden  
kitchen utensils for cooking with your induction  
cooktop.  
Never use your appliance for warming or  
heating the room.  
After use, always turn off the cooking zones and  
the cooktop as described in this manual (ie by  
using the touch controls). Do not rely on the pan  
detection feature to turn off the cooking zones  
when you remove the pans.  
6
Safety and warnings  
Important safety instructions  
Do not allow children to play with the appliance  
or sit, stand, or climb on it.  
Do not store items of interest to children in  
cabinets above the appliance. Children climbing  
on the cooktop could be seriously injured.  
Do not leave children alone or unattended in the  
area where the appliance is in use.  
Children of less than 8 years old must be kept  
away from the appliance unless continuously  
supervised. This appliance can be used by  
children aged from 8 years and above, and  
persons with reduced physical, sensory or  
mental capabilities or lack of experience and  
knowledge, if they have been given supervision  
or instruction concerning the use of the  
appliance in a safe way and they understand  
the hazards involved. Cleaning and user  
maintenance shall not be done by children  
without supervision.  
Do not repair or replace any part of the  
appliance unless specifically recommended in  
the manual. All other servicing should be done  
by a qualified technician.  
Do not use a steam cleaner to clean your  
cooktop.  
Do not place or drop heavy objects on your  
cooktop.  
7
Safety and warnings  
Important safety instructions  
Do not stand on your cooktop.  
Do not use pans with jagged edges or drag pans  
across the ceramic glass surface as this can  
scratch the glass.  
Do not use scourers or any other harsh/abrasive  
cleaning agents to clean your cooktop, as these  
can scratch the ceramic glass.  
If the power supply cable is damaged, it must  
only be replaced by a qualified technician.  
Do not operate your cooktop by means of an  
external timer or separate remote-control  
system.  
8
Introduction  
Introducing your cooktop  
Congratulations on your new purchase. Your Fisher & Paykel induction cooktop is the ultimate in  
induction cooking, giving you the speed, precision, and simplicity of electronic control, and the  
easy-care elegance of a ceramic glass surface. For more information, visit our local website listed  
on the back cover.  
A word on induction cooking  
Induction cooking is a safe, advanced, efficient, and economical cooking technology. It works by  
electromagnetic vibrations generating heat directly in the pan, rather than indirectly through  
heating the glass surface. The glass becomes hot only because the pan eventually warms it up.  
This technology has a number of advantages over traditional radiant energy cooking:  
Heat-up times are much faster.  
Use is safer as no heating takes place unless a suitable pan is placed on the cooking zone.  
As heat is transferred without loss, you save energy.  
Before using your new cooktop  
Read this guide, taking special note of the ‘Safety and warnings’ section.  
Remove any protective film that may still be on your cooktop.  
Using the touch controls  
The controls respond to touch, so you don’t need to apply any pressure.  
Use the ball of your finger, not its tip.  
Make sure the controls are always clean, dry, and there is no object (eg a utensil or a cloth)  
covering them. Even a thin film of water may make the controls difficult to operate.  
9
Choosing the right cookware  
Important!  
Only use cookware with a base suitable for induction cooking.  
Look for the induction symbol on the packaging or the bottom of  
the pan.  
You can check whether your cookware is suitable by carrying out  
a magnet test. Move a magnet towards the base of the pan. If it is  
attracted, the pan is suitable for induction.  
If you do not have a magnet:  
1
2
3
Put some water in the pan you want to check.  
Follow the steps under ‘To start cooking’ opposite.  
If  
does not flash in the display and the water is heating, the pan is suitable.  
Cookware made from the following materials is not suitable: pure stainless steel, aluminium or  
copper without a magnetic base, glass, wood, porcelain, ceramic, earthenware.  
Do not use cookware with jagged edges or a curved base.  
Make sure that the base of your pan is smooth, sits flat against the glass, and is similar in size as  
the cooking zone. A small pot on a large cooking zone may not be detected. Always centre your  
pan on the cooking zone.  
Always lift pans off the cooktop– do not slide, or they may scratch the glass.  
10  
Using your induction cooktop  
5
5
5
1
1
4
5
5
5
CI603DTB model  
CI604DTB model  
CI302DTB model  
2
1
1
2
1
2
4
3
2
CI905DTB model  
CI754DTB model  
Cooking  
Zone  
Zone  
Diameter  
Power  
PowerBoost  
Recommended  
minimum pan size  
1
2
3
4
145 mm  
180 mm  
1400 W  
1850 W  
2200 W *  
3000 W *  
120 mm  
145 mm  
145 mm  
210 mm  
2300 W  
3700 W *  
180/260 mm  
1850/2600 W  
3000/5500 W *  
125 mm (inner zone)  
250mm (dual zone)  
5
SmartZone  
2100 W  
3700 W **  
120mm (un-bridged)  
250mm (bridged)  
*
Maximum output when set on PowerBoost.  
** PowerBoost is not available when cooking zones are bridged.  
See ‘Using your cooktop’s special features.’  
11  
Using your induction cooktop  
Control panel  
Zone timer  
indicator  
if brightly lit:  
GentleHeat  
Timer Control  
timer is selected  
and ready to be set  
if dimly lit:  
indicators  
if on:  
timer is active  
if off:  
if one is lit:  
gentle heat is  
activated  
Heat  
Setting  
Display  
Cooking  
Zone  
identifier  
Bridging  
timer is  
Timer  
Display  
Zone  
indicator counting down  
timer is off  
if on:  
cooktop is on  
if off:  
if on:  
controls  
(except  
ON/OFF) are  
locked and  
unresponsive  
if off:  
controls are  
responsive  
ON/OFF  
control  
Turns the  
cooktop on  
and off  
Keylock  
control:  
Locks the  
controls  
(except  
ON/OFF)  
to prevent  
unintended  
use  
GentleHeat  
control  
Setting selector:  
Touch this area or  
slide your finger  
along it to select  
the heat setting.  
The display lights  
above the selector  
correspond to the  
setting levels (0-9)  
cooktop is off  
To select a setting on the selector:  
Touch at one point to “jump” to a  
specific setting  
OR  
slide your finger along the selector.  
12  
Using your induction cooktop  
To start cooking  
1
Touch and hold the ON/OFF  
control for 2 seconds.  
2
0 will appear in the cooking zone displays.  
A white indicator light will glow.  
3
Place a suitable pan on the  
cooking zone you wish to use.  
Make sure the bottom of the pan  
and the surface of the cooking  
zone are clean and dry.  
4
Select a heat setting by touching or sliding  
the setting selector with your finger.  
If you don’t choose a heat setting within 20  
seconds, the cooktop will automatically  
turn off. Start with step 1 again.  
You can modify the heat setting at any time  
during cooking.  
Important!  
Always place small pans in the centre  
of the cooking zone.  
13  
Using your induction cooktop  
If a display flashes  
alternately with the heat setting  
This means that:  
you have not placed a pan on the correct cooking zone or  
the pan you’re using is not suitable for induction cooking or  
the pan is too small or not properly centred on the cooking zone.  
No heating takes place unless there is a suitable pan on the cooking zone.  
The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.  
Dual zone cooking (CI905DTB & CI603DTB models only)  
When using a small pot on the dual cooking zone, be sure to centre it so that the inner zone will  
detect the pan. If the pan covers the outer zone, then the outer zone will automatically switch  
on.  
SmartZones (CI604DTB & CI302DBT models only)  
The SmartZones are large. You may place several small pots on the SmartZone and they will be  
detected as if they were one large pot.  
Important!  
The whole of the SmartZone is activated when a pot is detected. This means that other magnetisable items  
(such as cutlery) sitting in the cooking zone will heat up.  
Never leave cutlery or other magnestisable items on your cooktop.  
14  
Using your induction cooktop  
When you have finished cooking  
1a Turn the cooking zone off by touching or  
sliding down to 0.  
1b Turn the whole cooktop off by  
touching the ON/OFF control.  
Make sure the display shows 0.  
2
Beware of hot surfaces  
will flash in the window of any cooking zone that is too hot to touch. It will remain on and  
H
steadily lit even when the cooktop is turned off. It will disappear when the surface has cooled  
down to a safe temperature.  
15  
Using your induction cooktop  
Locking the controls  
You can lock the controls to prevent unintended use  
(for example children accidentally turning cooking zones on).  
When the controls are locked, all controls except the ON/OFF control are disabled.  
To lock the controls  
1
2
Make sure that the cooktop is turned on but no cooking zone is in use.  
Touch and hold the keylock control  
for 5 seconds. The white indicator light above the  
control comes on, indicating that the controls are locked.  
Note: the cooktop will automatically turn off after 20 seconds, but the controls will still be locked  
when you turn the cooktop on again.  
If any controls are accidentally touched while the cooktop is locked the white ‘lock’ indicator  
light will flash and the cooktop will remain locked.  
To unlock the controls  
1
2
Make sure the cooktop is turned on.  
Touch and hold the keylock control  
control goes out.  
for 3 seconds. The white indicator light above the  
3
You can now start using your cooktop.  
16  
Using your cooktop’s special features  
Using the PowerBoost feature  
This feature enables you to sear meat or bring liquid to the boil very quickly. When a cooking  
zone is set for PowerBoost, it uses more than 100% of the power of that particular cooking zone,  
resulting in a boost of intense heat.  
Important!  
PowerBoost heats food and liquids very quickly. Do not leave the cooktop unattended when using this  
feature.  
To set a cooking zone for PowerBoost  
1
With the cooktop turned on, touch or slide the setting selector up to the last setting on the right  
until  
P
is displayed.  
When PowerBoost is set  
10 mins  
The cooking zone will be on PowerBoost (more than 100%) for 10 minutes,  
P
will then flash for  
(100%).  
a few seconds before the cooking zone automatically reduces the heat to setting  
9
To quit the PowerBoost setting  
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.  
17  
Using your cooktop’s special features  
Note:  
You can set two (CI603DTB, CI604DTB and CI754DT) or three (CI905DTB) cooking zones for  
PowerBoost, as long as one is not behind the other. For example:  
CI754DTB model shown as an example  
If one cooking zone is set to PowerBoost and you accidentally select a second cooking zone  
immediately in front or behind it also setting it to PowerBoost, the first cooking zone will warn  
you that the configuration is not possible, flash and then automatically reduce its power level.  
P
When a cooking zone is set for PowerBoost, the cooking zone immediately in front of or behind  
may automatically reduce its power level.  
PowerBoost is not available if cooking zones are bridged.  
18  
Using your cooktop’s special features  
Using the GentleHeat feature  
There are two Gentle heat settings.  
The Low setting  
is ideal for the most delicate cooking tasks (such as melting chocolate), as  
the cooking zone will provide a very low continuous gentle heat.  
The Medium setting  
delicate foods.  
is ideal for keeping cooked food warm and the gentle warming of  
To set a cooking zone for GentleHeat  
1a With the cooktop turned on, touch the  
GentleHeat control.  
1b If you want the Medium setting, touch  
the GentleHeat control again to select  
the Medium setting.  
The Low setting indicator above will  
glow and U will show in the display.  
The Medium setting indicator above  
will glow and the Low setting indicator  
goes out.  
Touching the control a third time will  
switch off the cooking zone altogether.  
To quit the GentleHeat setting  
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.  
19  
Using your cooktop’s special features  
Using the Auto Heat-reduce feature  
Cooking zones set for this feature will:  
first quickly heat up food or liquid at the highest setting  
then automatically reduce the heat to a pre-selected lower setting to cook the food through.  
To set a cooking zone for Auto Heat-reduce  
1
With the cooktop turned on, touch or  
slide the setting selector to the level  
that you wish the cooking zone to  
automatically reduce to.  
2
Hold your finger on the control for 3  
seconds until the letter starts to flash,  
alternately with the temperature you have  
selected.  
A
Do not lift your finger.  
The control is now set and you can move  
your finger away.  
20  
Using your cooktop’s special features  
When Auto Heat-reduce is set  
Initially, while the cooking zone is  
at the highest setting, A will flash  
alternately with your selected lower  
setting. The length of time at the  
highest setting depends on the lower  
heat setting selected. See chart below.  
Then, when the period of highest setting  
is over, A will stop flashing and the  
cooking zone will automatically reduce  
the heat to your pre-selected lower  
setting.  
If you would like a lower or higher heat setting than you originally selected, simply slide to the  
new setting and hold until the A starts flashing. Alternatively, wait until A stops flashing and  
then modify the heat setting.  
Pre-selected lower heat setting  
Approx. length of time at highest setting  
1
2
3
4
5
6
7
8
40 seconds  
1 minute  
2 minutes  
3 minutes  
4 minutes  
7 minutes  
2 minutes  
3 minutes  
To quit the Auto Heat-reduce setting while A is flashing  
Either touch or slide the setting selector to a new setting or to 0 to turn the cooking zone off.  
Note:  
The Auto Heat-reduce and PowerBoost features cannot be used together. If you turn  
PowerBoost on when Auto Heat-reduce is already set, the Auto Heat-reduce will cancel and  
PowerBoost will stay on.  
21  
Using your cooktop’s special features  
Using the timer  
You may use the timer in two different ways:  
You can use it as a minute minder, even when not using the cooktop.  
When used as a minute minder, the timer will not turn any cooking zone off when  
the set time is up.  
You can set it to turn one or more cooking zones off after the set time is up.  
You can set the timer for up to 1 hour and 59 minutes.  
The time will be displayed in hours and minutes when the timer is set for longer than 10  
minutes.  
Using the timer as a minute minder  
If you are not using any cooking zones  
You can set the minute minder when you are not using any cooking zones. The cooktop will turn  
itself off after 20 seconds after you have set the time, but the timer will continue to count down.  
To change or cancel the minute minder setting, you will have to turn the cooktop back on. See  
To change or cancel a timer setting.  
.
2
Set the time.  
Hint: the minutes will scroll faster if you  
touch and hold – or + continuously.  
1a Make sure the cooktop is turned ON.  
Touch the – and + controls of the timer  
together. 0.00 will show in the minute  
display.  
1b The egg timer  
will glow.  
When the set time is up  
3
A few seconds after the time is set it will  
0.00 will flash and the timer will beep.  
Touch the – or + controls to stop the  
beeping.  
Remember, touching the ON/OFF control  
will turn the whole cooktop off!  
begin to countdown. The display will  
show the remaining time in hours and  
minutes or if less than 10 minutes, in  
minutes and seconds.  
22  
Using your cooktop’s special features  
Using the cooking zone after you have a set the minute minder  
If you start using a cooking zone after you have set the minute minder, the minute minder will  
continue to count down.  
You may also set cooking timer to turn a zone off (see opposite).  
Setting the minute minder when you are using one or more cooking zones.  
.
1
To set the minute minder when the cooking  
zone(s) are already being used, repeatedly  
tap the – and + controls of the timer  
2
Set the time.  
Hint: the minutes will scroll faster if you  
touch and hold – or + continuously.  
together to cycle through the individual  
timers  
for the cooking zones until the  
egg timer  
glows. 0.00 will steadily  
show in the minute display.  
(eg if you have 5 cooking zones, you will  
need to tap the – and + controls of the timer  
3
A few seconds after the time is set it will begin to countdown. The display will show the  
remaining time in hours and minutes, or if less than 10 minutes, in minutes and seconds.  
When the set time is up  
0.00 will flash and the timer will beep. Touch the – or + controls to stop the beeping.  
Remember, touching the ON/OFF control will turn the whole cooktop off!  
23  
Using your cooktop’s special features  
Setting the timer to turn one or more cooking zones off  
.
1
Make sure the cooking zone(s) you want  
to set the timer for are in use.  
2
Tap the  
and  
+
controls of the timer  
together until the indicator of the desired  
cooking zone comes on.  
Note: only indicators of cooking zones in  
use will show as you scroll through.  
3
Set the time.  
You may now continue to set the timer for additional cooking zones:  
.
4
Cycle through the zones, by tapping the – and + controls of the timer together until the timer  
indicator of the required cooking zone comes on.  
Note: the indicator of the cooking zone previously set will be dimly lit, showing you that the  
timer is set and counting down for that cooking zone.  
24  
Using your cooktop’s special features  
5
Set the time.  
You can set different times for each of the cooking zones.  
Setting the minute minder when other timers are set  
1
2
Repeatedly tap the – and + controls of the timer together as you cycle through the individual  
timers  
for the cooking zones until the egg timer  
glows. 0.00 will steadily show in the  
minute display.  
Touch the – and + controls to set the timer. It will then countdown.  
Note the indicator lights of the previously set cooking zones will be dimly lit, showing you that  
the timers are set and counting down.  
When the timer is set  
If more than one timer is set (including the minute minder), the indicator belonging to the  
cooking zone or minute minder with the shortest remaining time setting will glow brightly.  
Other timer indicators will be dimly lit.  
To check the remaining time for another cooking zone:  
Touch the  
and  
+
controls of the timer together and repeat until the indicator in the desired  
cooking zone window glows brightly.  
When the set time is up  
The cooking zone whose set time is up will automatically turn off.  
0.00will flash in the minute display.  
The timer will beep.  
Touch the  
or  
+
control to stop the beeping.  
The timer indicator of the relevant cooking zone will go out. The display will show  
0.  
If the timer is still set and counting down for another cooking zone  
The cooking time for the timer with the shortest remaining time left will be displayed and the  
corresponding timer indicator will glow brightly.  
25  
Using your cooktop’s special features  
To change or cancel a timer setting  
1
With the cooktop turned on, repeatedly tap the – and + timer controls together until the  
indicator light in the desired cooking zone window glows brightly.  
2
To change:  
2
To cancel:  
Set the new time.  
OR  
Touch the  
control of the timer and hold  
until the minute display shows  
0.  
Important!  
Scrolling down the time to  
the cooking zone.  
0
will not turn off  
When you have finished cooking, either touch  
or slide the setting selector to a new setting or  
to 0to turn the cooking zone off.  
26  
Using your cooktop’s special features  
Using Bridging Zones (CI302DTB & CI604DTB SmartZone models only)  
The bridging zone function allows you to use two SmartZones together giving you a  
larger cooking area. Your pan(s) will need to cover both cooking zones.  
There may be a cooler area in the centre of the cooktop between the cooking zones. You  
may need to move food around the pan to ensure even cooking.  
When using bridging zones it is not possible to use the PowerBoost function.  
Important!  
You can only bridge a cooking zone with the one directly behind it. It is not possible to bridge  
cooking zones that are side by side.  
CI302DTB model  
CI604DTB model  
Bridging zone  
Bridging zone  
Bridging zone  
cooler area  
cooler area  
cooler area  
setting selector  
for bridged zone  
setting selector for  
left bridged zone  
setting selector for  
right bridged zone  
To select the bridging function  
1
Place the pan on the cooktop over the two zones you wish to use, covering both cooking zones  
(as shown above).  
2
Touch the setting selectors (anywhere) of both cooking zones at the same time. The bridging  
zone indicator light will show in both control windows.  
in the right hand display.  
Owill show in the left hand display,  
27  
Using your cooktop’s special features  
3
Use the left hand setting selector to set the heat setting for the combined zone.  
The heat setting will be displayed in the left hand cooking zone control window only, but the  
setting indicator lights will glow on both cooking zones. The right hand selector will show  
.
If no pan is detected  
If no pan is detected on either cooking zone the left hand zone display will alternate between  
the selected setting and  
. The right hand selector will show  
.
28  
Using your cooktop’s special features  
If no pan is detected on one cooking zone:  
The left hand display will still show the selected temperature and the right hand display will still  
show  
.
If after 10 minutes no pan is detected:  
the bridging function will switch off.  
the cooking zone without a detectable pan will turn off.  
the remaining cooking zone will continue cooking at the selected heat setting.  
Using Automatic Cooking in bridged mode  
1
2
3
Bridge the cooking zones by touching both setting slectors (anywhere) simultaneously.  
Using the left hand setting selector, select the heat setting.  
Hold your finger on the control at the selected heat setting until  
selected setting.  
A
flashes alternately with the  
To cancel bridging  
At the same time, touch the setting selectors of both bridged cooking zones.  
The bridging indicator lights will go out.  
Note: Sliding the scale down to 0 will not turn off bridging.  
Note: Cancelling bridging will also cancel the timer for those cooking zones.  
Using the timer in bridged mode:  
You may only set one timer for the bridged cooking zone. See ‘Setting the timer.  
The timer indicator  
will show in both displays.  
29  
Cooking guidelines  
Important!  
Take care when frying: oil and fat heat up very quickly, particularly if you’re using PowerBoost. At  
extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire  
risk.  
Cooking tips  
When food comes to the boil, reduce the temperature setting.  
Using a lid will reduce cooking times and save energy by retaining the heat.  
Minimise the amount of liquid or fat to reduce cooking times.  
Start cooking on a high setting and reduce the setting when the food has heated through.  
Simmering, cooking rice  
Simmering occurs below boiling point, at around 85 OC, when bubbles are just rising occasionally  
to the surface of the cooking liquid. It is the key to delicious soups and tender stews because  
the flavours develop without overcooking the food. You should also cook egg-based and flour-  
thickened sauces below boiling point.  
Some tasks, including cooking rice by the absorption method, may require a setting higher than  
the lowest setting to ensure the food is cooked properly in the time recommended.  
Searing steak  
To cook juicy flavoursome steaks:  
1
2
3
Stand the meat at room temperature for about 20 minutes before cooking.  
Heat up a heavy-based frying pan.  
Brush both sides of the steak with oil. Drizzle a small amount of oil into the hot pan and then  
lower the meat onto the hot pan.  
4
5
Turn the steak only once during cooking. The exact cooking time will depend on the thickness of  
the steak and how cooked you want it. Times may vary from about 2 – 8 minutes per side. Press  
the steak to gauge how cooked it is – the firmer it feels the more ‘well done’ it will be.  
Leave the steak to rest on a warm plate for a few minutes to allow it to relax and become tender  
before serving.  
For stir-frying  
When stir-frying be careful to lift the pan clear of the surface if tossing the ingredients. Sliding  
the pan across the cooktop surface may scratch it.  
1
2
Choose an induction compatible flat-based wok or a large frying pan.  
Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large  
quantities, cook the food in several smaller batches.  
3
4
5
Preheat the pan briefly and add two tablespoons of oil.  
Cook any meat first, put it aside and keep warm.  
Stir-fry the vegetables. When they are hot but still crisp, turn the cooking zone to a lower setting,  
return the meat to the pan and add your sauce.  
6
7
Stir the ingredients gently to make sure they are heated through.  
Serve immediately.  
30  
Cooking guidelines  
Heat settings  
The settings below are guidelines only. The exact setting will depend on several factors,  
including your cookware and the amount you are cooking. Experiment with the cooktop to find  
the settings that best suit you.  
100  
80  
60  
40  
20  
0
u
1
2
3
4
5
6
7
8
9
P
Heat setting  
31  
Cooking guidelines  
Heat setting  
Suitability  
melting chocolate, butter, and foods that burn quickly  
u
delicate warming for small amounts of food  
gentle simmering  
slow warming  
1
-
2
4
reheating  
rapid simmering  
cooking rice  
3
-
pancakes  
5
7
-
-
6
8
sautéing  
cooking pasta  
stir-frying  
searing  
bringing soup to the boil  
9
P
boiling water  
32  
Care and cleaning  
What?  
How?  
Important!  
Everyday soiling  
on glass  
(fingerprints, marks,  
stains left by food or  
non-sugary spillovers  
on the glass)  
1
Switch the power to the  
When the power to the cooktop  
cooktop off at the wall.  
Apply cooktop cleaner while  
the glass is still warm (but not  
hot!)  
Rinse and wipe dry with a  
clean cloth or paper towel.  
Switch the power to the  
cooktop back on at the wall.  
is switched off, there will be no  
‘hot surface’ indication but the  
cooking zone may still be hot!  
Take extreme care.  
Heavy-duty scourers, some nylon  
scourers and harsh/abrasive  
cleaning agents may scratch the  
glass. Always read the label to  
check if your cleaner or scourer is  
suitable.  
2
3
4
Never leave cleaning residue  
on the cooktop: the glass may  
become stained.  
Boilovers, melts, and  
hot sugary spills on  
the glass  
Remove these immediately  
with a fish slice, palette knife  
or razor blade scraper suitable  
for ceramic glass cooktops, but  
beware of hot cooking zone  
surfaces:  
Switch the power to the  
cooktop off at the wall.  
Hold the blade or utensil at  
a 30o angle and scrape the  
soiling or spill to a cool area of  
the cooktop.  
Remove stains left by melts and  
sugary food or spillovers as soon  
as possible. If left to cool on the  
glass, they may be difficult to  
remove or even permanently  
damage the glass surface.  
Cut hazard: when the safety  
cover is retracted, the blade in  
a scraper is razor-sharp. Use  
with extreme care and always  
store safely and out of reach of  
children.  
1
2
3
4
Clean the soiling or spill up  
with a dish cloth or paper  
towel.  
Follow steps 2 to 4 for  
‘Everyday soiling on glass’  
above.  
Spillover on the touch  
controls and stainless  
steel strip  
1
Switch the power to the  
cooktop off at the wall.  
Soak up the spill  
Wipe the touch control area  
with a clean damp sponge or  
cloth.  
Wipe the area completely dry  
with a paper towel.  
Switch the power to the  
cooktop back on at the wall.  
The cooktop may beep and turn  
itself off, and the touch controls  
may not function while there is  
liquid on them. Make sure you  
wipe the touch control area dry  
before turning the cooktop back  
on.  
2
3
4
5
33  
Troubleshooting  
Troubleshooting chart  
Problem  
Possible causes  
What to do  
The cooktop cannot be  
turned on.  
No power.  
Make sure the cooktop is  
connected to the power supply  
and that it is switched on at the  
wall. Check whether there is  
a power outage in your home  
or area. If you’ve checked  
everything and the problem  
persists, call your Authorised  
Service Centre or Customer  
Care.  
The touch controls are  
unresponsive.  
The controls are locked.  
Unlock the controls. See section  
‘Using your induction cooktop’  
for instructions.  
The touch controls are  
difficult to operate.  
There may be a slight film of water Make sure the touch control  
over the controls or you may be  
using the tip of your finger when  
touching the controls.  
area is dry and use the ball of  
your finger when touching the  
controls.  
The glass is being  
scratched.  
Rough-edged cookware.  
Use cookware with flat and  
smooth bases. See ‘Choosing  
the right cookware.  
Unsuitable, abrasive scourer or  
cleaning products being used.  
See ‘Care and cleaning.  
Some or all displays flash Liquid has spilled onto the touch  
Switch the power to the  
cooktop off at the wall and  
see ‘Care and cleaning’ for  
instructions.  
and there is a  
control area.  
continuous beep.  
There are objects (eg utensils) on  
the touch control area.  
Remove the objects from the  
touch control area.  
Several touch controls are  
registering continuous contact  
(eg due to someone resting their  
hand or arm on the touch control  
area).  
Remove the cause of  
continuous contact.  
Pans do not become hot. The cooktop is in ‘Display mode’  
The heat setting display  
comes on, but the  
Contact Customer Care or your  
Authorised Service Centre.  
does not flash when I  
remove a pan.  
-0- shows in the timer  
display when I turn on  
the cooktop.  
34  
Troubleshooting  
Troubleshooting chart  
Problem  
Possible causes  
What to do  
Some pans make  
crackling or clicking  
noises.  
This may be caused by the  
construction of your cookware  
(layers of different metals  
vibrating differently).  
This is normal for induction  
cookware and does not indicate  
a fault.  
The cooktop makes a low This is caused by the technology  
This is normal, but the  
noise should quieten down  
or disappear completely  
when you decrease the  
heat setting.  
humming noise when  
used on a high heat  
setting (especially  
PowerBoost).  
of induction cooking.  
Fan noise coming from  
the cooktop.  
A cooling fan built into  
your cooktop has come on  
to prevent the electronics  
from overheating. It may  
continue to run even after  
you’ve turned the cooktop  
off.  
This is normal and needs  
no action. Do not switch  
the power to the cooktop  
off at the wall while the  
fan is running.  
Pans do not become hot  
The cooktop cannot detect the  
pan because it is not suitable for  
induction cooking.  
Use cookware suitable for  
induction cooking. See  
section ‘Choosing the right  
cookware.  
and  
appears in the  
display.  
The cooktop cannot detect the  
pan because it is too small for  
the cooking zone or not  
Centre the pan and make  
sure that its base matches  
the size of the cooking  
zone.  
properly centred on it.  
I have locked the control This is normal. The cooking zones Unlock the controls, deactivate  
panel while two cooking  
zones are bridged and  
the cooktop has not  
turned off.  
will remain inactive, but the  
indicator lights will remain on.  
the bridging zones (by touching  
the two setting selectors  
simultaneously) and then lock  
the cooktop again.  
PowerBoost is temporarily  
unavailable because the  
cooktop needs to protect  
itself from overheating.  
Allow the cooktop to cool  
down.  
P flashes in the display  
when you are trying to  
set PowerBoost.  
The cooktop or a cooking Technical fault.  
zone has turned itself off  
unexpectedly, a tone  
Please note down the error  
letters and numbers, switch  
the power to the cooktop off  
at the wall, and contact your  
Authorised Service Centre or  
Customer Care with the  
sounds and an error code  
is displayed (typically  
E or Er alternating with  
one or two digits in the  
cooking zone displays).  
error code information.  
35  
Warranty and service  
Before you call for service or assistance ...  
Check the things you can do yourself. Refer to the installation instructions and your user guide  
and check that:  
1
2
your product is correctly installed  
you are familiar with its normal operation.  
If after checking these points you still need assistance, please refer to the Service & Warranty  
book for warranty details and your nearest Authorised Service Centre, or contact us through our  
local website listed on the back cover.  
36  
Warranty and service  
This cooktop has been designed and constructed in accordance with the following  
codes and specifications:  
In New Zealand and Australia:  
AS/NZS 60335-1 General Requirements for Domestic electrical appliances  
AS/NZS 60335-2-6 Particular Requirements for Domestic electrical cooking appliances  
AS/NZS CISPR 14.1.2010 Electromagnetic Compatibility Requirements.  
In Europe:  
Safety requirements of EEC Directive “Low voltage” 2006/95:  
- EN 60335-1 General Requirements for Domestic electrical appliances  
- EN 60335-2-6 Particular Requirements for Domestic electrical cooking appliances  
Safety requirements of EEC Directive “EMC” 2004/108:  
- EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3 Electromagnetic Compatibility  
Requirements  
Requirements of EEC Directive 93/68.  
European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE)  
(for European Union countries only)  
GB This appliance is marked according to the European directive 2002/96/EC on Waste Electrical  
and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help  
prevent potential negative consequences for the environment and human health, which could  
otherwise be caused by inappropriate waste handling of this product.  
The symbol  
on the product, or on the documents accompanying the product, indicates that  
this appliance may not be treated as household waste. Instead it shall be handed over to the  
applicable collection point for the recycling of electrical and electronic equipment. Disposal  
must be carried out in accordance with local environmental regulations for waste disposal.  
For more detailed information about treatment, recovery and recycling of this product, please  
contact your local city office, your household waste disposal service or the shop where you  
purchased the product.  
Product details  
Fisher & Paykel Ltd  
Model  
Serial No.  
Purchaser  
Suburb  
Date of Purchase  
Dealer  
Town  
Country  
Copyright © Fisher & Paykel 2013. All rights reserved.  
The product specifications in this booklet apply to the specific products  
and models described at the date of issue. Under our policy of continuous  
product improvement, these specifications may change at any time. You  
should therefore check with your Dealer to ensure this booklet correctly  
describes the product currently available.  
NZ AU GB IE  
F&P PN - 590487 A  
05.2013  

HP Hewlett Packard HP 19 INch LCD Monitor LP1965 User Manual
HP Hewlett Packard Hewlett Packard Computer Drive 2 SP4 User Manual
Hotpoint N321IX User Manual
GE JP201 User Manual
Electrolux EOD43102 User Manual
Dell Computer Monitor P2314T P2714T User Manual
Cypress CY8C24223 User Manual
BT Glide 7163 User Manual
AT T E2912 User Manual
AG Neovo 1925L User Manual