Dell™ 2408WFP Flat Panel Monitor User's Guide
About Your Monitor
Solving Problems
Setting Up the Monitor
Appendix
Operating the Monitor
Notes, Notices, and Cautions
Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, notices, and cautions,
and they are used as follows:
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid
the problem.
CAUTION: A CAUTION indicates the potential for property damage, personal injury, or death.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the specific presentation of the caution is mandated by
regulatory authority.
Information in this document is subject to change without notice.
© 2007 Dell™ Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo are trademarks of DellInc; Microsoft and Windows either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined
that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2408WFP
December 2007
Rev. A00
5
6
Auto-adjust/Up (+)
Power button (with power light indicator)
Back View
Back view
Back View with monitor stand
Label
Description/Use
VESA mounting holes (100mm)
(Behind attached base plate)
1
2
To mount the monitor.
Connectors label
To indicate the positions and types of connectors.
3
4
5
6
7
Barcode serial number label
Security lock slot
To contact Dell for technical support.
To help secure your monitor.
Stand release button
To release the stand from the monitor.
Lists the regulatory approvals.
Regulatory rating label
Dell Soundbar mounting brackets
To attach the optional Dell Soundbar.
Push the monitor down, press the button to unlock the
monitor, and then lift the monitor to the desired height.
8
9
Lock down/release button
Cable management slot
To organize cables by placing them through the slot.
Side View
Right side
Left side
Label Description
1
2
USB downstream ports
Bottom View
Bottom view
Label Description
1
AC power cord connector
2
DC power connector for Dell™ Soundbar
DisplayPort connector
HDMI connector
3
4
5
DVI connector-1
6
DVI connector-2
7
VGA connector
8
Composite video connector
S-Video connector
9
10
11
12
13
Component video connectors
Audio out
USB upstream port
USB downstream ports
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPMS compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use.
This is referred to as Power Save Mode*. If input from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically
"wake up". The following table shows the power consumption and signaling of this automatic power-saving feature:
VESA Modes
Horizontal
Sync
Vertical Sync
Video
Power
Indicator
Power Consumption
Normal operation
Active
Active
Active
Green
110 W (maximum)*
57 W (normal)**
Active-off mode
Switch off
Inactive
-
Inactive
-
Blanked
-
Amber
Off
Less than 2 W
Less than 1 W
* With Audio and USB
** Without Audio and USB
NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '99/TCO '03 power management
compatible.
NOTE: Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the
monitor.
Pin Assignments
VGA Connector
Pin
Number
15-pin Side of the
Connected Signal Cable
1
Video-Red
Video-Green
Video-Blue
GND
2
3
4
5
Self-test
GND-R
6
7
GND-G
8
GND-B
9
Computer 5V/3.3V
GND-sync
GND
10
11
12
13
14
15
DDC data
H-sync
V-sync
DDC clock
DVI Connector
Pin
Number
24-pin Side of the Connected Signal
Cable
1
TMDS RX2-
TMDS RX2+
TMDS Ground
Floating
2
3
4
5
Floating
6
DDC Clock
DDC Data
7
8
Floating
9
TMDS RX1-
TMDS RX1+
TMDS Ground
Floating
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Floating
+5V/+3.3V power
Self test
Hot Plug Detect
TMDS RX0-
TMDS RX0+
TMDS Ground
Floating
Floating
TMDS Ground
TMDS Clock+
TMDS Clock-
S-video Connector
Pin Number
5-pin Side of the Connected
Signal Cable (Cable not
included)
1
2
3
4
5
GND
GND
LUMA
CHROMA
GND
Composite Video Connector
Luma composite chroma
Component Video Connector
Pin Number
3-pin Side of the Connected Signal Cable (Cable not
included)
1
2
3
Y (Luminance signal)
Pb (Color differential signal)
Pr (Color differential signal)
DisplayPort Connector
Pin
Number
20-pin Side of the Connected Signal
Cable
1
ML0(p)
GND
2
3
ML0(n)
ML1(p)
GND
4
5
6
ML1(n)
ML2(p)
GND
7
8
9
ML2(n)
ML3(p)
GND
10
11
12
13
14
15
16
17
18
19
20
ML3(n)
GND
GND
AUX(p)
GND
AUX(n)
HPD
Re-PWR
PWR
HDMI Connector
Pin
Number
19-pin Side of the Connected Signal
Cable
1
TMDS DATA 2+
TMDS DATA 2 SHIELD
TMDS DATA 2-
TMDS DATA 1+
TMDS DATA 1 SHIELD
TMDS DATA 1-
TMDS DATA 0+
TMDS DATA 0 SHIELD
TMDS DATA 0-
TMDS CLOCK
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
TMDS CLOCK SHIELD
TMDS CLOCK-
Floating
Floating
DDC CLOCK (SDA)
DDC DATA (SDA)
GROUND
+5V POWER
HOT PLUG DETECT
Flat Panel Specifications
Screen type
Active matrix - TFT LCD
Screen dimensions
Preset display area:
24 inches (24-inch diagonal viewable image size)
518.4 mm (20.4 inches)
324 mm (12.7 inches)
Horizontal
Vertical
Pixel pitch
0.27 mm
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
Backlight
178° (Vertical) typical, 178° (Horizontal) typical
400 cd/m ²(typ)
1300:1 (typ), 3000:1 (typ, Dynamic Contrast on)
Antiglare with hard-coating 3H
7 CCFL U-type system
Response Time
Color Gamut
6ms panel typical (Grey to Grey)
110%* typical
* 2408WFP Color Gamut (Typical) is based on CIE1976 (110%) and CIE1931 (102%).
Resolution
Horizontal scan range
Vertical scan range
30 kHz to 83 kHz (automatic)
56 Hz to 75 Hz
Optimal preset resolution
Highest preset resolution
1920 x 1200 at 60 Hz
1920 x 1200 at 60 Hz
Video Supported Modes
Video display capabilities (DVI playback)
480p/576p/720p/1080p (Supports HDCP)
Video display capabilities (Composite playback) NTSC/PAL
Video display capabilities (S-Video playback)
Video display capabilities (HDMI playback)
NTSC/PAL
480i/480p/576i/576p/720p/1080i/1080p
Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i/1080p
Preset Display Modes
The following table lists the preset modes for which Dell guarantees image size and centering:
Display Mode
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Pixel Clock
(MHz)
Sync Polarity
(Horizontal/Vertical)
VGA, 720 x 400
31.5
31.5
37.5
37.9
46.9
48.4
60.0
67.5
64.0
80.0
75.0
74.5
70.1
59.9
75.0
60.3
75.0
60.0
75.0
75.0
60.0
75.0
60.0
60.0
28.3
25.2
-/+
-/-
VGA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1600 x 1200
VESA, 1920 x 1200
31.5
-/-
40.0
+/+
+/+
-/-
49.5
65.0
78.8
+/+
+/+
+/+
+/+
+/+
+/-
108.0
108.0
135.0
162.0
154.0
Electrical
The following table lists the electrical specification:
Video input signals
Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input
impedance
HDMI, 600mV for each differential line, 100 ohm input impedance
per differential pair
DisplayPort, 600mV for each differential line, 100 ohm input
impedance per differential pair
S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input
impedance
Composite, 1 volt(p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input
impedance
Synchronization input signals
separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
AC input voltage/frequency/current
Inrush current
100 to 240 VAC/50 or 60 Hz + 3 Hz/2.0A (Max.)
120V: 40A (Max.)
240V: 80A (Max.)
Physical Characteristics
The following table lists the physical characteristics:
Connector type
l
l
l
l
l
l
l
D-sub: blue connector
DVI-D: white connector
DisplayPort: black connector
S-video
Composite
Component
HDMI
Signal cable type
l
l
l
D-sub: Detachable, Analog, 15pin, shipped attached to the
monitor
DVI-D: Detachable, Digital, 24pin, shipped detached from
the monitor
DisplayPort: Detachable, Digital, 20pin, shipped detached
from the monitor
S-video
Composite
Component
HDMI
l
l
l
l
NOTE: The S-video, composite, component, and HDMI
cables are not included with the monitor.
Dimensions (with stand)
Height (Compressed)
Height (Extended)
Width
396.8 mm (15.62 inches)
496.8 mm (19.56 inches)
559.7 mm (22.04 inches)
207.6 mm (8.17 inches)
Depth
Dimensions (without stand)
Height
359.6 mm (14.4 inches)
559.7 mm (22.04 inches)
87.5 mm (3.44 inches)
Width
Depth
Stand Dimensions
Height (Compressed)
Height (Extended)
Width
338.2 mm (13.31 inches)
379.2 mm (14.93 inches)
432 mm (17.01 inches)
207.6 mm (8.17 inches)
Depth
Weight
Weight with packaging
11.7 kg ( 26.41 lb)
Weight with stand assembly and cables
9.58 kg ( 21.74 lb)
Weight without stand assembly
(For wall mount or VESA mount
considerations - no cables)
6.74 kg ( 15.48 lb)
2.16 kg (4.76 lb)
Weight of stand assembly
Environmental
The following table lists the environmental limitation:
Temperature
5° to 35°C (41° to 95°F)
Operating
Storage: 0° to 60°C (32° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Nonoperating
Humidity
10% to 80% (noncondensing)
Operating
Storage: 5% to 90% (noncondensing)
Shipping: 5% to 90%(noncondensing)
Nonoperating
Altitude
3,657.6 m (12,000 ft) max
12,192 m (40,000 ft) max
Operating
Nonoperating
Thermal dissipation
375 BTU/hour (maximum)
195 BTU/hour (typical)
Universal Serial Bus (USB) Interface
This monitor supports High-Speed Certified USB 2.0 interface.
Transfer speed
Data Rate
Power
Consumption
High speed
Full speed
Low speed
480 Mbps
12 Mbps
1.5 Mbps
2.5W (Max., each port)
2.5W (Max., each port)
2.5W (Max., each port)
USB Upstream Connector
Pin Number
4-pin Side of the connector
1
2
3
4
DMU
VCC
DPU
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
2
3
VCC
DMD
DPD
4
GND
USB Ports
l
l
1 upstream - rear
4 downstream - 2 on rear; 2 on left side
NOTE: USB 2.0 capability requires 2.0 capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you switch
the monitor off and then on, the attached peripherals may take a few seconds to resume normal functionality.
Card Reader Specifications
Overview
l
l
l
l
The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.
The Flash Memory Card Reader is automatically recognized by Windows® 2000, XP and Vista.
Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.
All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.
Features
The Flash Memory Card Reader has the following features:
l
l
l
l
l
Supports Windows 2000, XP and Vista operating systems
No Windows 9X support from Dell
Mass Storage Class device (No drivers are required under Windows 2000, XP and Vista)
USB-IF certification
Supports various memory card media
The following table lists the slot to support what kind of memory card:
Slot Number
Flash memory cards type
1
2
Compact Flash type I/II Card (CF I/II)/CF form factor ATA hard drives to USB 2.0 bus
xD-Picture Card
Memory Stick Card (MS)/High Speed Memory Stick (HSMS)/Memory Stick Pro Card (MS
PRO)/Memory Stick Duo (with Adapter)
Secure Digital Card (SD)/Mini Secure Digital (with Adapter)/TransFlash Card (with
Adapter)
MultiMedia Card (MMC)/Reduced Size MultiMedia Card (with Adapter)
Maximum Card Capacity Supported by the 2408WFP card reader
Card type
Support Specification
Memory Card
Spec Version
Max. capacity
CF
Compact Flash Specification
2.0
128GB
128MB
32GB
MS
Memory Stick Standard Format Specification
Memory Stick Pro Standard Format Specifications
1.40-00
1.01-01
MSPRO
MSDuo
xD
Memory Stick Duo Standard Format Specifications
xD Picture Card Specification
1.10-00
1.2
128MB/32GB
2GB
SD
SD Memory Card Specifications
2.0
32GB
MMC
MultiMedia Card System Specification
4.2
32GB
NOTE: SD includes MiniSD
NOTE: MMC includes RS-MMC
General
Connection type
Supported OS
USB 2.0 High Speed Device (USB Full Speed Device compatible)
Windows 2000, XP and Vista
Performance
Transfer Speed
Read: 480 Mb/s (max.)
Write: 480 Mb/s (max.)
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display
Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If required, the
user can select different settings, but in most cases monitor installation is automatic.
Maintenance Guidelines
Caring for Your Monitor
CAUTION: Before cleaning the monitor, unplug the monitor from the electrical
outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
l
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
l
l
l
Use a lightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.
If you notice a white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as dark-colored monitors may scratch and show white scuff marks more than lighter-colored monitors.
Appendix
Dell™ 2408WFP Flat Panel Monitor User's Guide
CAUTION: Safety Instructions
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
Read and follow these instructions when connecting and using your computer monitor:
l
To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating
current (AC) power available at your location:
¡
115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60
hertz (Hz)), and Taiwan.
¡
230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.
l
Always be sure that your monitor is electrically rated to operate with the AC power available in your location.
NOTE: This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage
according to the ranges defined in the "Electrical Specifications" section in the User's Guide.
l
l
l
l
l
l
l
l
l
Do not store or use the monitor in locations that are exposed to heat, direct sunlight, or extreme cold.
Avoid moving the monitor between locations with large temperature differences.
Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.
Do not store or use the monitor in locations exposed to high humidity or dusty environment.
Do not allow water or other liquids to spill on or into the monitor.
Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.
Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.
Never use your monitor if the power cable has been damaged. Ensure that nothing rests on your computer's cables and that the cables are not located
where they can be stepped on or tripped over.
l
l
Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.
Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the
monitor on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor
in a bookcase or an enclosed space, be sure to provide adequate ventilation and air flow.
l
l
Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.
Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and
contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.
l
l
l
Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.
Locate your monitor near an easily accessible electric outlet.
If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an
authorized dealer or service center.
l
l
Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified
service personnel.
High temperatures can cause problems. Don't use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources
of heat.
l
l
Unplug the monitor when it is going to be left unused for an extended period of time.
Unplug your monitor from the electric outlet before any service is performed.
l
LAMP(S) INSIDE THIS PRODUCT CONTAIN(S) MERCURY AND MUST BE RECYCLED OR DISPOSED OFF ACCORDING TO LOCAL, STATE OR
FEDERAL LAWS. FOR MORE INFORMATION, GO TO WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT
FCC Notice (U.S. Only)
FCC Class B
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturer's instruction
manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.
NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Dell™ Inc. could void your authority to operate this
equipment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:
l
l
l
l
Reorient the receiving antenna.
Relocate the system with respect to the receiver.
Move the system away from the receiver.
Plug the system into a different outlet so that the system and the receiver are on different branch circuits.
If necessary, consult a representative of Dell™ Inc. or an experienced radio/television technician for additional suggestions.
The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:
l
l
l
Product name: 2408WFP Flat Panel Monitor
Model number: 2408WFPb
Company name:
Dell Inc.
Worldwide Regulatory Compliance & Environmental Affairs
One Dell Way
Round Rock, Texas 78682 USA
512-338-4400
Contacting Dell™
To contact Dell electronically, you can access the following websites and by phone:
l
l
For support through the web, go to support.dell.com.
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product
catalog.
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Visit support.dell.com.
2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.
3. Click Contact Us on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
Setting Up Your Monitor
Dell™ 2408WFP Flat Panel Monitor
If you have a Dell™ desktop or a Dell™ portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell™ to inquire about a Graphics Adapter that supports these resolutions.
Setting Up Your Monitor
Dell™ 2408WFP Flat Panel Monitor
If you have non Dell™ desktop, portable computer, or graphic card
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.
NOTE: If you are unable to set the resolution to 1920x1200, please contact the manufacturer of your computer or consider purchasing a graphics adapter
that will support the video resolution of 1920x1200.
Operating the Monitor
Dell™ 2408WFP Flat Panel Monitor User's Guide
Using the Front Panel
Use the buttons on the front of the monitor to adjust the image settings.
A
Use Input Source Select button to select between two different video signals that may be connected to your monitor.
l
l
l
l
l
l
l
l
VGA input
DVI-D 1 input
DVI-D 2 input
DisplayPort input
HDMI input
Component video input
S-Video input
Composite video input
Input Source Select
As you cycle through the inputs you will see the following messages to indicate the currently selected input source. It may take
seconds for the image to appear.
or
or
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
or
If either S-Video, Composite, HDMI or Component input is selected and the cables are not connected or the video source is turn
screen does not have an image. If any button is pressed (except power button), the monitor displays the following message:
B
Use this button to activate PIP (Picture-in-Picture)/PBP (Picture-by-Picture) modes adjustment.
Pressing this button continually cycles the monitor through the following modes : OFF-->PIP-->PBP. You will see the following m
corresponding to the mode selected.
→
PIP/PBP Select
→
C
The Menu button is used to open and exit the on-screen display (OSD), and exit from menus and sub-menus. See Using the OS
OSD Menu/Select
D
Use this button for direct access to the "Brightness" and "Contrast" control menu.
Brightness /Contrast
Hot Key
D
and
E
Use these buttons to adjust (decrease/increase ranges) items in the OSD menu.
Down (-) and Up (+)
E
Use this button to activate automatic setup and adjustment. The following dialog appears on a black screen as the monitor self
the current input:
Auto Adjust
Auto Adjustment
button allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you ca
tune your monitor by using the Pixel Clock (Coarse), Phase (Fine) controls in the OSD.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached cables.
F
Use the power button to turn the monitor on and off.
Power button
(with power light
indicator)
The green light indicates the monitor is on and fully functional. An amber light indicates power save mode.
Using the OSD Menu
NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor
automatically saves those changes. The changes are also saved if you change the settings and then wait for the
OSD menu to disappear.
1. Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
Or
Main Menu for non Analog (non VGA) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2.Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table
for a
complete list of all the options available for the monitor.
3.Push the MENU button once to activate the highlighted option.
4.Push
and
button to select the desired parameter.
5. Push MENU to enter the slide bar and then use the
and
buttons, according to the indicators on the menu, to make your changes.
6.Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and
Submenus
Description
EXIT
Select to exit the main menu.
BRIGHTNESS
& CONTRAST
This menu is to activate Brightness/Contrast adjustment.
Back
Push
to go back to the main menu.
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the
Brightness
button to decrease brightness (min 0 ~ max 100).
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
Contrast
Exit Menu
Push
to exit the OSD main menu.
AUTO ADJUST
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display setting
setup.
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT
The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.
SOURCE
Back
Push
to go back to the main menu.
Auto Select
Scan for Sources. Push
to scan for available input signals.
VGA
Select VGA input when you are using the analog (VGA) connector. Push
Select DVI-D input when you are using the Digital (DVI) connector. Push
to select the VGA input source.
to select the DVI input source.
DVI-D 1 & 2
DisplayPort
HDMI
Select DisplayPort input when you are using DisplayPort connector. Push
to select the DisplayPort input source.
Select HDMI input when you are using HDMI connector. Push
to select the HDMI input source.
Component
S-Video
Select Component input when you are using component video connector. Push
to select the component input source.
Select S-Video input when you are using S-Video connector. Push
to select the S-Video input source.
Composite
Exit Menu
Select Composite input when you are using composite video connector. Push
to select the composite input source.
Push
to exit the OSD main menu.
PRESET
MODES
There are several image modes for different usage.
Image mode submenu for VGA/DVI-D input
Image mode submenu for Video input
or
NOTE: Image modes are different between the VGA/DVI-D and Video inputs
Back
Input Color Format
Gamma
Push
to go back to the main menu.
To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB
graphics display over DVI).
To achieve the different color mode for PC and Mac.
Color Setting mode
You can choose between a Graphics and a Video mode. If your computer is connected to your monitor, choose Graphics. If a
your monitor, choose Video.
VGA/DVI-D input
Desktop Mode
Mode suitable for desktop applications.
Mode for multimedia applications, eg video playback.
Mode suitable for gaming applications.
Mode to emulate 72% NTSC color.
Multimedia Mode
Game Mode
sRGB Mode
Warm Mode
Cool Mode
Warm mode is selected to obtain a red tint. This color setting is typically used for color-intensive applications (photograph im
etc.).
Cool mode is selected to obtain a bluish tint. This color setting is typically used for text based applications (spreadsheets, p
Custom (R, G, B)
Use the
or
button to increase or decrease each of the three colors (R, G, B) independently, in single-digit increments
Video input
Movie Mode
Game Mode
Mode suitable for movie playback.
Mode suitable for game applications.
Sports Mode
Nature Mode
Hue
Mode suitable for sports scenes.
Mode suitable for nature scenes.
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in sin
100.
makes video image shade into greenish
makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use -
'100'.
Saturation
Exit Menu
makes video image looks more monochrome
makes video image looks more colorful
Push
to exit the OSD main menu.
DISPLAY
SETTINGS
Push
to go back to the main menu.
Back
Adjust the image ratio as 1:1, aspect or full screen.
Wide Mode
NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.
Use the
Use the
and
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Horizontal Position
Vertical Position
Sharpness
Zoom
This feature can make the image look sharper or softer. Use
Use the Zoom function to zoom in to specific area of interest.
or
to adjust the sharpness from '0' to '100' .
Using the
and
keys to zoom in and out.
Horizontal Pan
After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down resp
Use the
Use the
and
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
Vertical Pan
Pixel Clock
Phase
The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed th
selecting 'Image Settings'.
Use the
and
buttons to adjust for best image quality.
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use P
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Dynamic Contrast Dynamic contrast allows you to increase the level of contrast to provide sharper and more detailed image quality.
Display Info
All the settings related to this monitor.
Display Reset
Exit Menu
Reset the image to the original factory setting.
Push
to exit the OSD main menu.
OTHER
SETTINGS
Back
Push
to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
This function is used to adjust the OSD background from opaque to transparent.
Language
Menu Transparency
Menu Timer
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
and
buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
Menu Lock
Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked e
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD
Select No(-) to unlock and allow user access to all applicable settings.
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust according to your Display Rotation.
To turn on or off Audio Power during Power Save mode.
Menu Rotation
Audio Option
DDC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be a
You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the L
several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature does not remove burn-
LCD Conditioning
Reset all OSD settings to the factory preset values.
Push
to exit the OSD main menu.
Factory Reset
Exit Menu
PIP
SETTINGS
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF (main source is
VGA/DVI-D input)
PIP/PBP submenu when PIP/PBP OFF (main source is
input)
or
PIP/PBP submenu when PIP/PBP ON (main source is
VGA/DVI-D input)
PIP/PBP submenu when PIP/PBP ON (main source is
or
NOTE: When using DVI source, the contrast adjustment is not available.
Push to go back to the main menu.
Back
Mode
There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)
Use and to browse and to select "Off", "PIP" or "PBP".
When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.
When PIP/PBP
activated
Select an input signal for PIP/PBP. (VGA/DVI-D 1/DVI-D 2/DP (DisplayPort)/HDMI/S-Video/Composite/Component)
PIP/PBP Source
PIP Size
Use
and
to browse and
to select.
Select PIP window size.
Use and to browse and
to select.
PIP Position Select PIP window position.
Use and to browse and
to select.
Adjust the brightness level of the picture in PIP/PBP Mode.
Brightness
reduce the brightness
increases the brightness
Adjust the contrast level of the picture in PIP/PBP Mode.
PIP/PBP Contrast
reduce the contrast
increases the contrast
This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.
shifts image color towards green
PIP/PBP Hue/Tint
PIP/PBP Saturation
Exit Menu
shifts image color towards purple
Adjust the color saturation of PIP/PBP image.
makes the image look more monochrome
makes the image look more colorful
Push
to exit the OSD main menu.
OSD Warning Messages
When the monitor does not support a particular resolution mode you will see the following
message :
This means that the monitor cannot synchronize with the signal that it is receiving from the
by this monitor. Recommended mode is 1920 X 1200.
When monitor enters Power Save mode, the following message appears :
Activate the computer and wake up the monitor to gain access to the OSD
If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA/DVI-D input
Video Input
or
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input
as long as the OSD screen is closed.
1. VGA
2. DVI-D 1
3. DVI-D 2
4. HDMI
or
or
or
5. DisplayPort
6. S-Video
7. Composite
8. Component
or
or
or
If either VGA, DVI-D, HDMI or DisplayPort input is selected and all VGA, DVI-D, HDMI and DisplayPort cables are not connected, a floating dialog box as shown be
or
or
or
NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP/PBP submenu to bring bac
NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-Sub or DVI) and 1 Video S
functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.
Setting the Optimal Resolution
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1920 x 1200.
4. Click OK.
If you do not see 1920 x 1200 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures.
If you have a Dell desktop or portable computer:
¡
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡
¡
Go to the support site for your computer and download the latest graphic drivers.
Go to your graphics card website and download the latest graphic drivers.
Using the Dell Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell flat panel displays. The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
1. Attach mechanism
2. Headphone connectors
3. Power indicator
4. Power/Volume control
Using the Tilt, Swivel and Vertical Extension
Tilt/Swivel
With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.
NOTE: Stand is detached and extended when the monitor is shipped from the factory.
Vertical Extension
Stand extends vertically up to 100mm via the Lock down/release button.
NOTE: If you monitor gets locked down:
1. Push the monitor down.
2. Press the Lock down/release button on the bottom rear of stand to unlock the monitor.
3. Lift the monitor up and extend the stand to the desired height.
NOTICE: Before relocating or moving the monitor to a different location, make sure that the stand is locked down. To lock it down, lower the height of
the panel until it clicks and is locked into place.
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of
the monitor.
NOTE: To take advantage of the "Display Rotation" function (Landscape versus Portrait view) an updated graphics driver is required for your Dell™
Computer not included with this monitor. Please download the graphics driver from support.dell.com and refer to the "download" section for "Video
Drivers" for latest driver updates.
NOTE: When in "Portrait View Mode", you may experience performance degradation in graphic-intensive applications (3D Gaming etc.)
Adjusting the Rotating Settings of Your Operating System
After you have rotated your monitor, you need to complete the procedure below to rotate your operating system.
NOTE: If you are using the monitor with a non-Dell computer, you need to go to the graphics driver website or your computer manufacturer website for
information on rotating your operating system.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have ATI graphics card, select the Rotation tab and set the preferred rotation.
If you have nVidia graphics card, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation.
If you have Intel graphics card, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.
Setting Up Your Monitor
Dell™ 2408WFP Flat Panel Monitor
Important instructions to set the display resolution to 1920x1200 (Optimal)
For optimal display performance while using the Microsoft Windows® operating systems, set the display resolution to 1920 x 1200 pixels by performing the
following steps:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1920x1200.
4. Click OK.
If you do not see 1920x1200 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the
computer system you are using, and follow the provided directions:
Dell™ 2408WFP Flat Panel Monitor
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, are trademarks of DellInc; Microsoft and Windows either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries. Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark
of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2408WFP
December 2007
Rev. A00
Setting Up the Monitor
Dell™ 2408WFP Flat Panel Monitor User's Guide
Attaching the Stand
NOTE: The stand is detached when the monitor is shipped from the factory.
Place the stand on a flat surface and follow these steps to attach the monitor stand:
1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.
Connecting Your Monitor
To connect your monitor to the computer perform the following steps/instructions:
l
l
Turn off your computer and disconnect the power cable.
Connect either the white (digital DVI-D) display connector cable, the blue (analog VGA) display connector cable or the black DisplayPort cable to the
corresponding video port on the back of your computer. Do not use all the cables on the same computer. Use all the cables only when they are
connected to different computers with appropriate video systems.
Connecting the white DVI cable
NOTE: Your monitor supports two DVI ports. You can either choose DVI-D 1 or DVI-D 2 via source select
button.
Connecting the blue VGA cable
Connecting the black DisplayPort cable
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the the computer may vary.
After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to complete your monitor setup:
l
l
Plug the power cables for your computer and monitor into a nearby outlet.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
Use the cable management slot on the monitor stand to organize the cables.
l
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to
neatly organize all cables as shown above.
Attaching the soundbar
1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE: Do not use with any device other than Dell Soundbar
NOTE: Soundbar Power Connector +12V DC output is for optional Soundbar only.
Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
Complete the following steps to remove the stand:
1. Rotate the stand to allow access to the stand release button.
2. Press and hold the stand release button.
3. Lift the stand up and away from the monitor.
Solving Problems
Dell™ 2408WFP Flat Panel Monitor User's Guide
Troubleshooting Your Monitor
Self-Test Feature Check (STFC)
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue
connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly.
While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously
scroll through the screen.
or
or
4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system, because your monitor is
functioning properly.
NOTE: Self test feature check is not available for S-Video, Composite and Component video modes.
OSD Warning Messages
For OSD-related issues, see OSD Warning Messages
Common Problems
The following table contains general information about common monitor problems you might encounter.
Common
Symptoms
What You
Experience
Possible Solutions
No Video/ Power No picture
LED off
l
Ensure that the video cable connecting the monitor and the computer is
properly connected and secure.
l
l
Verify that the power outlet is functioning properly using any other electrical
equipment.
Ensure that the power button depressed fully.
No Video/ Power No picture
l
l
l
Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video cable connector.
LED on
or no
brightness
Poor Focus
Picture is
fuzzy,
blurry, or
ghosting
l
l
l
l
l
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Eliminate video extension cables.
Reset the monitor to Factory Settings.
Change the video resolution to the correct aspect ration (16:10).
Shaky/Jittery
Video
Wavy
picture or
fine
l
l
l
l
l
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Reset the monitor to Factory Settings.
Check environmental factors.
movement
Relocate the monitor and test in another room.
Missing Pixels
LCD screen
has spots
l
l
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD
technology.
Stuck-on Pixels
LCD screen
has bright
spots
l
l
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD
technology.
Brightness
Problems
Picture too
dim or too
bright
l
l
l
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Geometric
Distortion
Screen not
centered
correctly
l
l
l
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
NOTE: When using '2: DVI-D', the positioning adjustments are not
available.
Horizontal/VerticalScreen has
l
l
l
l
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check and determine if these lines are also
in self-test mode.
Lines
one or more
lines
l
Check for bent or broken pins in the video cable connector.
NOTE: When using '2: DVI-D', the Pixel Clock and Phase
adjustments are not available.
Synchronization Screen is
l
l
l
l
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check to determine if scrambled screen
appears in self-test mode.
Problems
scrambled
or appears
torn
l
l
Check for bent or broken pins in the video cable connector.
Restart the computer in the safe mode.
Safety Related
Issues
Visible signs
of smoke or
sparks
l
l
Do not perform any troubleshooting steps.
Contact Dell immediately.
Intermittent
Problems
Monitor
malfunctions
on & off
l
Ensure that the video cable connecting the monitor to the computer is
connected properly and is secure.
Reset the monitor to Factory Settings.
Perform monitor self-test feature check to determine if the intermittent
problem occurs in self-test mode.
l
l
Missing Color
Wrong Color
Picture
missing
color
l
l
Perform monitor self-test feature check.
Ensure that the video cable connecting the monitor to the computer is
connected properly and is secure.
l
Check for bent or broken pins in the video cable connector..
Picture color
not good
l
l
l
Change the Color Setting Mode in the Color Settings OSD to Graphics or
Video depending to the application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value
in Color Settings OSD if the Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting
OSD.
Image retention Faint
l
l
Use the Power Management feature to turn off the monitor at all times
Alternatively, use a dynamically changing screensaver.
from a static
shadow
image left on the from the
monitor for a long static image
period of time
displayed
appears on
the screen
Video Problems
COMMON SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
l Check Video Input Selection
No Video
No signal indicator is displayed
¡
¡
¡
Composite: Yellow colored RCA jack
S-Video: Typically a round 4 pin jack
Component: Red, Blue, Green colored RCA jacks
Low Quality DVD
playback
Picture not crisp and some color
distortion
l Check DVD connection
¡
¡
¡
Composite gives good picture
S-Video gives better picture
Component: Red, Blue, Green colored RCA jacks
Blinking Video
Video is blinking or discontinuous
l
l
Check DVD connection
¡
¡
¡
Composite gives good picture
S-Video gives better picture
Component: Red, Blue, Green colored RCA jacks
Check if DVD player is HDCP compliant.
¡
Some non-compliant players may exhibit blinking video and others will display a
raster screen.
Product Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
Screen image is too small
Image is centered on screen, but does not fill entire
viewing area
l
Perform monitor reset on "Factory Reset"
Cannot adjust the monitor with
the buttons on the front panel
OSD does not appear on the screen
l
Turn the monitor off and unplug the power
cord and then plug back and power on
The monitor will not go into
power saving mode.
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No S-Video input
signal ", " No Composite input signal " or " No
Component input signal " will appear.
l
l
Move mouse or hit any key on the
keyboard on the computer or activate
video player, then access the OSD to set
Audio to " off " state.
No Input Signal when user
controls pressed
No picture, the LED light is green. When press "+",
"-" or "Menu" key, the message " No S-Video input
signal ", " No Composite input signal " or " No
Component input signal " will appear.
Check the signal source Make sure the
Computer is not in power saving by moving
mouse or pressing any key on the
keyboard.
l
l
l
Check to make sure Video Source to S-
Video, Composite or Component is
powered and playing video media.
Check whether the signal cable is plugged
in and seated properly. Re-plug the signal
cable if necessary.
Re-boot the computer or video player.
The monitor will not fill the entire The picture can't fill the height or width of the
screen. screen.
l
Due to the non-standard formats of DVDs,
the monitor may not show the full screen
pictures.
NOTE: When choosing DVI-D, DisplayPort, HDMI, S-Video, Composite or Component video, Auto Adjust function is not available.
Universal Serial Bus (USB) Specific Problems
SPECIFIC SYMPTOMS
WHAT YOU EXPERIENCE
POSSIBLE SOLUTIONS
USB interface is not working
USB peripherals are not working
l
l
l
l
l
Check that your monitor is powered ON.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Switch off and then turn on the monitor again.
Reboot the computer.
High Speed USB 2.0 interface is High Speed USB 2.0 peripherals working slowly or
slow. not at all.
l
l
l
l
l
Check that your computer is USB 2.0 capable.
Verify USB 2.0 source on your computer.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Reboot the computer.
Troubleshooting the Dell™ Soundbar
COMMON
SYMPTOMS
WHAT YOU
EXPERIENCE
POSSIBLE SOLUTIONS
No Sound
No power to Soundbar - the
power indicator is off.
(built-in DC power supply. i.e.
2408WFP)
l
Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the
power indicator (green LED) on the front of the Soundbar is illuminated.
Confirm that the power cable from the Soundbar is plugged into the monitor.
Confirm that the monitor has power.
problem.
l
l
l
No Sound
Soundbar has power - power
indicator is on.
l
l
l
l
l
l
Plug the audio line-in cable into the computer's audio out jack.
Set all Windows volume controls to their maximum.
Play some audio content on the computer (i.e. audio CD, or MP3).
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting.
Clean and reseat the audio line-in plug.
Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound
Computer's sound card is used
as the audio source.
l
l
l
l
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card.
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Distorted Sound
Other audio source is used.
l
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the audio source.
Decrease the volume of the audio source.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting.
Clean and reseat the audio line-in plug.
Unbalanced Sound
Output
Sound from only one side of
Soundbar
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the sound card or
audio source.
l
l
l
l
Set all Windows audio balance controls (L-R) to their midpoints.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (i.e. portable CD player).
Low Volume
Volume is too low.
l
l
l
l
l
Clear any obstructions between the Soundbar and the user.
Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting.
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.
Test the Soundbar using another audio source (i.e. portable CD player).
Troubleshooting the Card Reader
NOTICE: Do not remove the device while reading or writing media. Doing so may cause loss of data or
malfunction in the media.
Problem
Cause
Solution
Drive letter is not
assigned.
Conflict with network drive letter.
A. Right-click My Computer on the desktop, and then click Manage.
Under Computer Management, click Desk Management.
(Windows XP only)
B. In the list of drives in the right panel, right-click Removable Device
and then click Change Drive Letter and Paths.
C. Click Change, and in the drop-down box, specify a drive letter for the
Removable Device, choosing one that is not assigned to the mapped
network drives.
D. Click OK, and then click OK again
Drive letter is
assigned, but the
media is not
accessible
The media needs reformatting.
Right-click the drive in Explorer and choose Format from the resulting
menu.
The media has been
ejected during
writing or erasing.
Displays the error message, "Error copying file or folder." Reinsert the media and write or erase again.
Displays the error message, "Cannot write folder (folder
name) or file (file name)," during writing, or, "Cannot
remove folder (folder name) or file(file name),". While
erasing, you cannot write or erase in the same folder or
file name.
Format the media for writing or erasing the same folder or file name.
Despite the
Although the pop-up window disappears during writing, if Format the media for writing or erasing the same folder or file name.
disappearance of the you eject your media while the LED is still blinking, then
pop-up window, the
media has been
you cannot complete your action on the media.
ejected while the
LED was blinking.
Cannot format or
Write protect switch is enabled.
Verify that the write- protect switch of the media is unlocked.
write on the media.
|