Dell™ 2208WFP Flat Panel Monitor User's Guide
About Your Monitor
Solving Problems
Appendix
Setting Up the Monitor
Operating the Monitor
Notes, Notices, and Cautions
NOTE: A NOTE indicates important information that helps you make better use of your computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.
CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of Dell
Inc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in
certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2208WFP
August 2007 Rev. A00
Front panel controls
Label Description
1
2
Input Source select
OSD Menu/Select button
3
4
5
Brightness & Contrast/Down (-) button
Auto-adjust/Up (+) button
Power button (with power light indicator)
Back View
Back view
Label
Back View with monitor stand
Description
VESA mounting holes (100mm)
(Behind attached base plate)
Use to mount the monitor.
1
2
3
Refer to this lable if you need to contact Dell for
technical support.
Barcode serial number label
Use a security lock with the slot to help secure your
monitor.
Security lock slot
4
5
Dell Soundbar mounting brackets
Regulatory rating label
Attach the optional Dell Soundbar.
Lists the regulatory approvals.
6
7
Stand removeal button
Cable management hole
Press to release the stand.
Help organize cables by placing them through the hole.
Push the monitor down, press the button to unlock the
monitor, and then lift the monitor to the desired height.
8
Lock down/release button
Side View
USB
connectors
(downstream)
Left view
Right view
Bottom View
Label
Description
1
2
3
AC power cord connector.
DC power connector for Dell Soundbar.
DVI connector
4
5
6
VGA connector
USB upstream port
USB connector port
Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for various connectors for your monitor.
Power Management Modes
If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use.
Mode*. If the computer detects input from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows th
of this automatic power saving feature:
VESA Modes
Horizontal Sync Vertical Sync Video
Power Indicator Power Consumption
Normal operation (with Dell Soundbar and USB active) Active
Active
Active
Inactive
-
Active
Active
Green
Green
75 W (maximum)
45 W (typical)
Less than 2 W
Less than 1 W
Normal operation
Active-off mode
Switch off
Active
Inactive
Blanked Amber
Off
-
-
The OSD will only function in the normal operation mode. When the menu or plus buttons are pressed in Active-off mode, one of the following messages will be di
Analog Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
OR
Digital Input In Power Save Mode. Press Computer Power Button or Any Key on Keyboard or Move Mouse
Activate the computer and the monitor to gain access to the OSD.
NOTE: This monitor is ENERGY STAR®-compliant as well as TCO '99/TCO '03 power management compatible.
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
Pin Assignments
VGA Connector
Pin
15-pin Side of the Connected Signal Cable
Number
1
Video-Red
Video-Green
Video-Blue
GND
2
3
4
5
Self-test
GND-R
6
7
GND-G
8
GND-B
9
Computer 5V
GND-sync
GND
10
11
12
13
14
15
DDC data
H-sync
V-sync
DDC clock
DVI Connector
Pin
24-pin Side of the Connected Signal Cable
Number
1
2
3
T.M.D.S. Data 2-
T.M.D.S. Data 2+
T.M.D.S. Data 2 Shield
4
5
No connector
No connector
6
DDC Clock
7
DDC Data
8
No connector
9
T.M.D.S. Data 1-
T.M.D.S. Data 1+
T.M.D.S. Data 1 Shield
No connector
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
No connector
+5V power
Self test
Hot Plug Detect
T.M.D.S. Data 0-
T.M.D.S. Data 0 Shield
T.M.D.S. Data
No connector
No connector
T.M.D.S.Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
Universal Serial Bus (USB) Interface
This section gives you information about the USB ports that are available on the left side of your monitor.
NOTE: This monitor supports High-Speed Certified USB 2.0 interface
Transfer speed
Data Rate
Power Consumption
High speed
Full speed
Low speed
480 Mbps
12 Mbps
1.5 Mbps
2.5W (Max., each port)
2.5W (Max., each port)
2.5W (Max., each port)
USB Upstream Connector
Pin Number
4-pin Side of the connector
1
2
3
4
DMU
VCC
DPU
GND
USB Downstream Connector
Pin Number
4-Pin Side of the Signal Cable
1
2
3
4
VCC
DMD
DPD
GND
USB Ports
l
l
1 upstream - rear
4 downstream - 2 on rear; 2 on left side
NOTE: USB 2.0 functionality requires a USB 2.0-capable computer
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached
seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identificat
Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. Most monitor installations are automatic; you can select different s
Flat Panel Specifications
Screen type
Active matrix - TFT LCD
Screen dimensions
Preset display area:
Horizontal
22 inches (22-inch viewable image size)
473.76 mm (18.7 inches)
296.1 mm (11.7 inches)
0.282 mm
Vertical
Pixel pitch
Viewing angle
Luminance output
Contrast ratio
Faceplate coating
160° (vertical) typ, 160° (horizontal) typ
300 CD/m ²(typ)
1000 to 1 (typ)
Antiglare with hard-coating 3H
Backlight
CCFL (4) edgelight system
5ms typical
Response Time
Resolution Specifications
Horizontal scan range
Vertical scan range
30 kHz to 83 kHz
56 Hz to 76 Hz
Optimal preset resolution
Highest preset resolution
1680 x 1050 at 60 Hz
1680 x 1050 at 75 Hz
Video Supported Modes
Video display capabilities (DVI playback)
480i/480p/576i/576p/720p/1080i/1080p (Support HDCP)
Preset Display Modes
Display Mode
Horizontal Frequency
Vertical Frequency (Hz) Pixel Clock (MHz)
Sync Polarity
(Horizontal/Vertical)
(kHz)
VESA, 720 x 400
VESA, 640 x 480
VESA, 640 x 480
VESA, 800 x 600
VESA, 800 x 600
VESA, 1024 x 768
VESA, 1024 x 768
31.5
31.5
37.5
37.9
46.9
48.4
60.0
70.0
60.0
75.0
60.0
75.0
60.0
75.0
28.3
25.2
31.5
40.0
49.5
65.0
78.8
-/+
-/-
-/-
+/+
+/+
-/-
+/+
VESA, 1152 x 864
VESA, 1280 x 1024
VESA, 1280 x 1024
VESA, 1680 x 1050
VESA, 1680 x 1050
67.5
64.0
80.0
65.2
64.6
75.0
60.0
75.0
60.0
60.0
108.0
135.0
135.0
146.3
119.0
+/+
+/+
+/+
-/+
+/-
Electrical Specifications
Analog RGB, 0.7 Volts +/-5%, positive polarity at 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, positive polarity at 50
ohm input impedance
Video input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level,
SOG (Composite SYNC on green)
Synchronization input signals
AC input voltage/frequency/current
Inrush current
100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
120V:42A (Max.)
240V:80A (Max.)
Physical Characteristics
Connector type
15-pin D-subminiature, blue connector; DVI-D, white connector
Digital: Detachable, DVI-D, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15pins, shipped attached to the monitor
Signal cable type
Dimensions (with stand)
Height (Compressed)
Height (Extended)
Width
14.18 inches (360.24 mm)
18.12 inches (460.24 mm)
20.13 inches (511.41 mm)
5.45 inches (138.50 mm)
Depth
Dimensions (without stand)
Height
13.19 inches (334.94 mm)
20.13 inches (511.41 mm)
2.56 inches (65.00 mm)
Width
Depth
Stand dimensions
Height (Compressed)
Height (Extended)
Width
12.58 inches (319.53 mm)
14.24 inches (361.18 mm)
15.96 inches (405.30 mm)
7.73 inches (196.50 mm)
Depth
Weight
Weight with packaging
Weight with stand assembly and cables
Weight without stand assembly
18.78 lbs (8.53 kg)
14.87 lbs (6.75 kg)
(For wall mount or VESA mount considerations - 10.88 lbs (4.94 kg)
no cables)
Weight of stand assembly
3.99 lbs (1.81 kg)
Environmental Characteristics
Temperature
Operating
5° to 35°C (41° to 95°F)
Storage: -20° to 60°C (-4° to 140°F)
Shipping: -20° to 60°C(-4° to 140°F)
Non-operating
Humidity
Operating
10% to 80% (non-condensing)
Storage: 5% to 90% (non-condensing)
Shipping: 5% to 90%(non-condensing)
Non-operating
Altitude
Operating
Non-operating
3,657.6m (12,000 ft) max
12,192 m (40,000 ft) max
256.08 BTU/hour (maximum)
153.6 BTU/hour (typical)
Thermal dissipation
Maintenance Guidelines
Cleaning Your Monitor
CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
For best practices, follow the instructions in the list below while unpacking, cleaning, or handling your monitor:
l
To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the
antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
l
l
l
l
Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent of any kind as some detergents leave a milky film on the monitor.
If you notice white powder when you unpack your monitor, wipe it off with a cloth.
Handle your monitor with care as darker-colored monitor may scratch and show white scuff marks more than lighter-colored monitor.
To help maintain the best image quality on your monitor, use a dynamically changing screen saver and turn off your monitor when not in use.
Appendix
Dell™ 2208WFP Flat Panel Monitor User's Guide
CAUTION: Safety Instructions
CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock,
electrical hazards, and/or mechanical hazards.
For information on safety instructions, see the Product Information Guide.
FCC Notices (U.S. Only) and Other Regulatory Information
For FCC notices and other regulatory information, see the regulatory compliance website located at www.dell.com\regulatory_compliance.
Contacting Dell
For customers in the United States, call 800-WWW-DELL (800-999-3355).
NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog
Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be
available in your area. To contact Dell for sales, technical support, or customer service issues:
1. Visit support.dell.com.
2. Verify your country or region in the Choose A Country/Region drop-down menu at the bottom of the page.
3. Click Contact Us on the left side of the page.
4. Select the appropriate service or support link based on your need.
5. Choose the method of contacting Dell that is convenient for you.
Setting Up Your Monitor
Dell™ 2208WFP Flat Panel Monitor User's Guide
If you have a Dell™ desktop or a Dell™ portable computer with internet access
1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.
2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1680 x 1050 again.
NOTE: If you are unable to set the resolution to 1680 x 1050, please contact Dell™ to inquire about a Graphics Adapter that supports these
resolutions.
Setting Up Your Monitor
Dell™ 2208WFP Flat Panel Monitor User's Guide
If you have non Dell™ desktop, portable computer, or graphic card
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Select Advanced.
4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).
5. Please refer to the graphic card provider website for updated driver.
6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1680 x 1050 again.
NOTE: If you are unable to set the resolution to 1680 x 1050 , please contact the manufacturer of your computer or consider purchasing a graphics
adapter that will support the video resolution of 1680 x 1050.
Operating the Monitor
Dell™ 2208WFP Flat Panel Monitor User's Guide
Using the Front Panel
Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls,
an OSD shows the numeric values of the characteristics as they change.
Front panel Button
Input Source Select
Description
A
Use Input Source Select button to select between eight different video signals that may be connected to your monitor.
l
l
VGA input
DVI-D input
If both VGA and DVI cables are connected to one PC, this monitor will display an image automatically just as long as a
video signal is present in either VGA or DVI outputs. When connecting one display to two PCs, if using screen savers,
best to set both to the exact times. Whichever mouse is moved first will activate that video input first.
As you cycle through the inputs you will see the following messages to indicate currently selected input source. It may
take 1 or 2 seconds for the image to appear.
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as
shown below appears.
or
If either S-Video or Composite input is selected and both cables are not connected or the video source is turned off, the
screen does not display an image. If any button is pressed (except power button), the monitor displays the following
message:
B
Use the MENU button to launch the on-screen display (OSD) and select the OSD Menu.
OSD Menu/Select
C
Use this button for direct access to the "Brightness" and "Contrast" control menu.
Brightness/Contrast
Hot Key
C
and
D
Use these buttons to navigate and adjust the slider-bar (decrease/increase ranges) controls in the OSD.
Down (-) and Up
(+)
D
Use this button to activate automatic setup and adjust menu. The following dialog appears on a black screen as the
monitor self-adjusts to the current input:
Auto Adjust
Auto Adjustment allows the monitor to self-adjust to the incoming video signal. After using Auto Adjustment, you can
further tune your monitor by using the Pixel Clock (Coarse) and Phase (Fine) controls under DISPLAY SETTINGS.
NOTE: Auto Adjust does not occur if you press the button while there are no active video input signals or attached
cables.
E
Use the Power button to turn the monitor on and off.
The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Power button
(with power light
indicator)
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those
changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1.
Push the MENU button to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for non Analog (non VGA) Input
NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.
2.
Push the
and
buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
3.
4.
Push the MENU button once to activate the highlighted option.
Push the
Push
and
buttons to select the desired parameter.
or button, according to the indicators on the menu, to make your changes.
5.
to enter the slide bar and then use the
6.
Select the "back" option to return to the main menu or "exit" to exit the OSD menu.
Icon
Menu and
Submenus
Description
EXIT
Select to exit the main menu.
BRIGHTNESS Use this menu to activate Brightness/Contrast adjustment.
& CONTRAST
Back
Push
to go back to the main menu.
Brightness
Contrast
Brightness adjusts the luminance of the backlight.
Push the button to increase brightness and push the
Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.
Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100).
The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.
button to decrease brightness (min 0 ~ max 100).
Exit Menu
Push
to exit the OSD main menu.
Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use
with your particular setup.
AUTO
ADJUST
NOTE: In most cases, Auto Adjust produces the best image for your configuration.
NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.
INPUT
Use the INPUT SOURCE menu to select between different video signals that may be connected to your monitor.
SOURCE
Back
Push
to go back to the main menu.
VGA
Select VGA input when you are using the analog (VGA) connector. Push
Select DVI-D input when you are using the Digital (DVI) connector. Push
to select the VGA input source.
to select the DVI input source.
DVI-D
Scan for
Source
Push
Push
to scan for available input signals.
Exit Menu
to exit the OSD main menu.
PRESET
SETTING
Use the Preset Modes to adjust the color setting mode and color temperature.
There are different color setting sub-menus for VGA/DVI-D and Video input.
Preset
setting
submenu
Preset setting submenu for VGA input
Preset setting submenu for DVI-D input
Back
Push
to go back to the main menu.
Input Color
Format
To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is
suitable for normal PC graphics display over DVI).
Gamma
To achieve the different color mode for PC and Mac.
Color Setting You can choose between a Graphics and a Video mode. If your computer is connected to your monitor, choose Graphics. If a DVD,
mode STB, or VCR is connected to your monitor, choose Video.
Color Presets To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is
(VGA/DVI-D suitable for normal PC graphics display over DVI).
Input)
Desktop
Mode
Mode suitable for desktop applications.
Multimedia
Mode
Mode for multimedia applications (example, video playback).
Game Mode
sRGB Mode
Mode suitable for game applications.
Mode to emulate 72% NTSC color.
Warm Mode
Cool MOde
Warm mode is selected to obtain a redder tint. This color setting is typically used for color-intensive applications (photograph image
editing, multimedia, movies, etc.).
Cool mode is selected to obtain a bluish tint. This color setting is typically used for text based applications (spreadsheets,
programming, text editors, etc.).
Custom
(R,G,B) Mode
Use the
100.
or
button to increase or decrease each of the three colors (R, G, B) independently, in single-digit increments, from 0 to
Presets Mode
(Video Input)
Movie Mode
Game Mode
Mode suitable for movie playback.
Mode suitable for game applications.
Sports Mode Mode suitable for sports scenes.
Nature Mode Mode suitable for nature scenes.
Hue
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.
makes video image shade into greenish
makes video image shade into purplish
NOTE: Hue adjustment only available for video input.
Saturation
This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use - or + to
adjust the hue from '0' to '100'.
makes video image looks more monochrome
makes video image looks more colorful
NOTE: Saturation adjustment only available for video input.
Exit Menu
Push
to exit the OSD main menu.
DISPLAY
SETTINGS
Display
Setting
submenu
Display Setting submenu for VGA input
Display Setting submenu for DVI-D input
Back
Push
to go back to the main menu.
Horizontal Po
sition
Use the
and
buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).
NOTE: When using DVI source, the Horizontal Position setting is not available.
Vertical Posit
ion
Use the
and
buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).
NOTE: When using DVI source, the Vertical Position setting is not available.
Sharpness
Pixel Clock
This feature can make the image look sharper or softer.
Use
and
buttons to adjust the sharpness from '0' to '100'.
The Pixel Clock and Phase adjustments allow you to adjust your monitor to your preference. These settings are accessed through the
main OSD menu, by selecting 'Display Settings'.
Use the
and
buttons to adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine), again.
NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Display Info
All the settings related to this monitor.
Display Reset Reset the image to the original factory setting.
Exit Menu
Push
to exit the OSD main menu.
OTHER
SETTINGS
Other Setting
submenu
Back
Push
to go back to the main menu.
Language
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, or Japanese).
Menu
This function is used to adjust the OSD background from opaque to transparent.
Transparency
Menu Timer
Menu Lock
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
and
buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.
Controls user access to adjustments. When 'Lock'
button.
is selected, no user adjustments are allowed. All buttons are locked except
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-
selected on entry. Press and hold button for 15 seconds to unlock and allow user access to all applicable settings.
Menu
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your Display Rotation.
Rotation
Audio
Options
To turn on or off audio power during power save mode.
Default is "Enable". Select Disable to disable this feature.
Yes — Turn off audio power during power save mode.
No — Turn on audio power during power save mode.
DDC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your PC. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
LCD
If an image appears to be stuck on the monitor, select LCD Conditioning to help eliminate any image retention. Using the LCD
Conditioning Conditioning feature may take several hours. Severe cases of image retention are known as burn-in, the LCD Conditioning feature
does not remove burn-in.
NOTE: Use LCD Conditioning only when you experience a problem with image retention.
Factory
Reset
Reset all OSD settings to the factory preset values.
Exit Menu
Push
to exit the OSD main menu.
OSD Warning Messagess
One of the following warning messages may appear on the screen indicating that the monitor is out of synchronization.
or
or
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the
Horizontal and Vertical frequency ranges addressable by this monitor. Recommended mode is 1680 X 1050.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears :
Activate the computer and wake up the monitor to gain access to the OSD
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below
appears.
or
Setting the Optimal Resolution
To set the optimal resolution for the monitor:
1. Right-click on the desktop and select Properties.
2. Select the Settings tab.
3. Set the screen resolution to 1680 x 1050.
4. Click OK.
If you do not see 1680 x 1050 as an option, you may need to update your graphics driver. Depending on your computer, complete one of the following
procedures:
l
l
If you have a Dell desktop or portable computer:
Go to support.dell.com, enter your service tag, and download the latest driver for your graphics card.
If you are using a non-Dell computer (portable or desktop):
¡
¡
Go to the support site for your computer and download the latest graphic drivers.
Go to your graphics card website and download the latest graphic drivers.
¡
Using the Dell Soundbar (Optional)
The Dell Soundbar is a stereo two channel system adaptable to mount on Dell Flat Panel Displays. The Soundbar has a rotary volume and on/off control to
adjust the overall system level, a blue LED for power indication, and two audio headset jacks.
1. Power/volume control
2. Power indicator
3. Headphone connectors
Using the Tilt, Swivel, and Vertical Extension
Tilt/Swivel
With the built-in stand, you can tilt and/or swivel the monitor for the most comfortable viewing angle.
NOTE: The stand is attached and extended when the monitor is shipped from the factory.
Vertical Extension
The stand extends vertically up to 100mm. The figures below illustrate how to extend the stand vertically.
NOTE: If locked in the down position,
1. Push the monitor down.
2. Press the Lock down / release button on the bottom rear of stand to unlock the monitor.
3. Lift the monitor up and extend the stand to the desired height.
NOTICE: Before relocating or moving the monitor to a different location, make sure that the stand is locked down. To lock it down, lower
the height of the panel until it clicks and is locked into place.
Rotating the Monitor
Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully (Tilt) up to avoid hitting the bottom edge of the
monitor.
NOTE: To use the Display Rotation function (Landscape versus Portrait view) with your Dell computer, you require an updated graphics driver that is
not included with this monitor. To download the graphics driver, go to support.dell.com and see the Download section for Video Drivers for latest
driver updates.
NOTE: When in Portrait View Mode, you may experience performance degradation in graphic-intensive applications (3D Gaming etc.)
Adjusting the Rotation Display Settings of Your System
After you have rotated your monitor, you need to complete the procedure below to adjust the Rotation Display Settings of Your System.
NOTE: If you are using the monitor with a non-Dell computer, you need to go the graphics driver website or your computer manufacturer website for
information on rotating your operating system.
1. Right-click on the desktop and click Properties.
2. Select the Settings tab and click Advanced.
3. If you have an ATI graphics card, select the Rotation tab and set the preferred rotation.
If you have an nVidia graphics card, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation.
If you have an Intel graphics card, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.
NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.
Setting Up Your Monitor
Dell™ 2208WFP Flat Panel Monitor User's Guide
Important instructions to set the display resolution to 1680 x 1050 (Optimal)
For optimal display performance while using the Microsoft Windows® operating systems, set the display resolution to 1680 x 1050 pixels by performing the
following steps:
1. Right-click on the desktop and click Properties.
2. Select the Settings tab.
3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1680 x 1050.
4. Click OK.
If you do not see 1680 x 1050 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the
computer system you are using, and follow the provided directions:
Dell™ 2208WFP Flat Panel Monitor
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of Dell
Inc; Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in
certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product
meets the ENERGY STAR guidelines for energy efficiency.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.
Model 2208WPF
August 2007 Rev. A00
Setting Up the Monitor
Dell™2208WFP Flat Panel Monitor User's Guide
Attaching the Stand
NOTE: The stand is detached and extended when the monitor is shipped from the factory.
Place the stand on a flat surface and follow these steps to attach the monitor stand:
1. Fit the groove on the back of the monitor to the two tabs on the upper part of the stand.
2. Lower the monitor so that the monitor mounting area snaps on to or locks on to the stand.
Connecting Your Monitor
To connector your monitor to the computer perform the following steps/instructions:
l
l
Turn off your computer and disconnect the power cable.
Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with
appropriate video systems.
Connecting the White DVI Cable
Connecting the Blue VGA Cable
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.
After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your
monitor setup:
l
l
l
l
Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer .
Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.)
Plug the power cables for your computer and monitor into a nearby outlet.
Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.
Use the cable holder on the monitor stand to organize the cables.
l
Organizing Your Cables
After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management hole
to organize all cables as shown above.
Attaching the Soundbar
NOTICE: Do not use with any device other than Dell Soundbar.
NOTE:Soundbar Power Connector -12V DC output is for optional Soundbar only.
1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the DC power connector.
4. Insert the mini stereo plug from the rear of the Dell Soundbar into the computer's audio output jack.
Removing the Stand
NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.
Complete the following steps to remove the stand:
1. Rotate the stand to allow access to the stand release button.
2. Press and hold the Stand release button.
3. Lift the stand up and away from the monitor .
Solving Problems
Dell™ 2208WFP Flat Panel Monitor User's Guide
Troubleshooting the Monitor
Self-Test Feature Check
Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly
connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue
connector) cables from the back of computer.
3. Turn on the monitor.
The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly.
While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously
scroll through the screen.
or
4. This box also appears during normal system operation if the video cable becomes disconnected or damaged.
5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.
If your monitor screen remains blank after you use the previous procedure, check your video controller and computer, because your monitor is functioning
properly.
NOTE: Self test feature check is not available for S-Video, Composite, and Component video modes.
Common Problems
The following table contains general information about common monitor problems you might encounter and the possible solutions.
Common Symptoms
What You
Experience
Possible Solutions
No Video/ Power LED off No picture
l
l
l
Ensure that the video cable connecting the monitor and the computer is properly connected and secure.
Verify that the power outlet is functioning properly using any other electrical equipment.
Ensure that the power button depressed fully.
No Video/ Power LED on No picture or no
brightness
l
l
l
Increase brightness & contrast controls via OSD.
Perform monitor self-test feature check.
Check for bent or broken pins in the video cable connector.
Poor Focus
Picture is fuzzy,
blurry, or ghosting
l
l
l
l
l
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Eliminate video extension cables.
Reset the monitor to Factory Settings.
Change the video resolution to the correct aspect ration (16:10).
Shaky/Jittery Video
Wavy picture or
fine movement
l
l
l
l
l
Perform Auto Adjust via OSD.
Adjust the Phase and Pixel Clock controls via OSD.
Reset the monitor to Factory Settings.
Check environmental factors.
Relocate the monitor and test in another room.
Missing Pixels
LCD screen has
spots
l
l
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Stuck-on Pixels
LCD screen has
bright spots
l
l
Cycle power on-off.
Pixel that is permanently off is a natural defect that can occur in LCD technology.
Brightness Problems
Geometric Distortion
Picture too dim or
too bright
l
l
l
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
Screen not
centered correctly
l
l
l
Reset the monitor to Factory Settings.
Auto Adjust via OSD.
Adjust brightness & contrast controls via OSD.
NOTE: When using '2:DVI-D', the positioning adjustments are not available.
Horizontal/Vertical Lines Screen has one or
more lines
l
l
l
l
l
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check and determine if these lines are also in self-test mode.
Check for bent or broken pins in the video cable connector.
NOTE: When using '2:DVI-D', the Pixel Clock and Phase adjustments are not available.
Synchronization ProblemsScreen is
scrambled or
l
l
l
l
l
l
Reset the monitor to Factory Settings.
Perform Auto Adjust via OSD.
Adjust Phase and Pixel Clock controls via OSD.
Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode.
Check for bent or broken pins in the video cable connector.
Restart the computer in the safe mode.
appears torn
Safety Related Issues
Intermittent Problems
Visible signs of
smoke or sparks
l
l
Do not perform any troubleshooting steps.
Contact Dell immediately.
Monitor
malfunctions on &
off
l
l
l
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Reset the monitor to Factory Settings.
Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode.
Missing Color
Wrong Color
Picture missing
color
l
l
l
Perform monitor self-test feature check.
Ensure that the video cable connecting the monitor to the computer is connected properly and is secure.
Check for bent or broken pins in the video cable connector..
Picture color not
good
l
l
l
Change the Color Setting Mode in the Color Settings OSD to Graphics or Video depending to the
application.
Try different Color Preset Settings in Color Settings OSD. Adjust R/G/B value in Color Settings OSD if the
Color Management is turned off.
Change the Input Color Format to PC RGB or YPbPr in the Advance Setting OSD.
Image retention from a Faint shadow from
static image left on the the static image
monitor for a long period displayed appears
of time on the screen
l
l
Use the Power Management feature to turn off the monitor at all times when not in use (for more
Alternatively, use a dynamically changing screensaver.
Product Specific Problems
Specific Symptoms
What You Experience
Possible Solutions
Screen image is too small
Image is centered on screen, but does not fill
entire viewing area
l
l
Check the Scaling Ratio setting in Image Setting OSD
Reset the monitor to Factory Settings.
Cannot adjust the monitor
with the buttons on the front
panel
OSD does not appear on the screen
l
l
Turn off the monitor, unplug the power cord, plug back, and then turn on
the monitor.
The monitor will not go into No picture, the LED light is blue. When press
Move mouse or hit any key on the keyboard or activate the video player,
power saving mode.
“+”, “-” or “Menu” key, the message “ No S-
Video input signal ”, “ No Composite input signal
then access the OSD to set Audio to off state.
”
or “ No Component input signal ” appears
No Input Signal when user
controls are pressed
l
l
l
l
Check the signal source. Ensure the Computer is not in the power saving
mode by moving the mouse or pressing any key on the keyboard.
Check to make sure Video Source to S-Video, Composite or Component is
powered and playing video media.
Check whether the signal cable is plugged in properly. Re-plug the
signal cable if necessary.
No picture, the LED light is blue. When press +, -
or Menu key, the message No S-Video input
signal, No Composite input signal, or No
Component input signal appears
Reset the computer or video player.
The picture does not fill the The picture cannot fill the height or width of the
l
l
Due to different video formats (aspect ratio) of DVDs, the monitor may
display in full screen.
entire screen.
screen
Input auto switching to
another source
Can't select input source
Under"Auto Detect"mode if one of the DVI or VGA signal is lost(or cable
disconnected)this display will automatically to the other input source
where a signal exist.
NOTE: When choosing DVI-D mode, the Auto Adjust function is not available.
Universal Serial Bus (USB) Specific Problems
Specific Symptoms
What You Experience
Possible Solutions
USB interface is not working
USB peripherals are not working
l
l
l
l
Check that your monitor is turned ON.
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Switch off and then turn on the monitor again.
l
l
Reboot the computer.
Some USB devices like external portable HDD require higher electric
current; connect the device directly to the computer system.
High Speed USB 2.0 interface is slow.High Speed USB 2.0 peripherals working
slowly or not working at all
l
l
Check that your computer is USB 2.0-capable.
Some computers have both USB 2.0 and USB 1.1 ports. Ensure that the
correct USB port is used.
l
l
l
Reconnect the upstream cable to your computer.
Reconnect the USB peripherals (downstream connector).
Reboot the computer.
Troubleshooting the Dell™ Soundbar
Common Symptoms
No Sound
What You Experience
Possible Solutions
No power to Soundbar - the power
indicator is off (built-in DC power supply.
i.e. 2208WFP)
l
Turn the Power/Volume knob on the Soundbar clockwise to the middle
position; check if the power indicator (green LED) on the front of the
Soundbar is illuminated.
l
l
l
Ensure that the power cable from the Soundbar is plugged into the monitor.
Ensure that the monitor has power.
monitor common problem.
No Sound
Soundbar has power - power indicator is
on
l
l
Plug the audio line-in cable into the computer's audio out jack.
Set all volume controls to their maximum and ensure that the mute option is
not enabled.
l
l
Play some audio content on the computer (example, audio CD, or MP3).
Turn the Power/Volume knob on the Soundbar clockwise to a higher volume
setting.
l
l
Clean and reseat the audio line-in plug.
Test the Soundbar using another audio source (For example: portable CD
player, MP3 player).
Distorted Sound
Computer's sound card is used as the
audio source
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the
sound card.
l
l
l
Set all Windows volume controls to their midpoints.
Decrease the volume of the audio application.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower
volume setting.
l
l
l
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (For example: portable CD
player, MP3 player).
Avoid using an audio cable extension or audio jack converter.
l
Distorted Sound
Other audio source is used
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the
audio source.
l
l
Decrease the volume of the audio source.
Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower
volume setting.
l
Clean and reseat the audio line-in plug.
Unbalanced Sound Output
Sound from only one side of Soundbar
l
l
Clear any obstructions between the Soundbar and the user.
Confirm that the audio line-in plug is completely inserted into the jack of the
sound card or audio source.
l
l
l
l
Set all Windows audio balance controls (L-R) to their midpoints.
Clean and reseat the audio line-in plug.
Troubleshoot the computer's sound card.
Test the Soundbar using another audio source (For example: portable CD
player, MP3 player).
Low Volume
Volume is too low
l
l
Clear any obstructions between the Soundbar and the user.
Turn the Power/Volume knob on the Soundbar clockwise to the maximum
volume setting.
l
l
l
Set all Windows volume controls to their maximum.
Increase the volume of the audio application.
Test the Soundbar using another audio source (For example: portable CD
player, MP3 player).
|