Compaq P710 User Manual

Users Guide  
Compaq P710 Color Monitor  
Compaq P910 Color Monitor  
Compaq P1210 Color Monitor  
CONTENTS  
1. INTRODUCTION  
Features............................................................ 1  
Internal Preset Memory Capability ................... 3  
Power Management Function .......................... 3  
DDC .................................................................. 3  
Location Considerations .................................. 4  
Cleaning Your Monitor ..................................... 4  
Unpacking ........................................................ 5  
Tilt/Swivel Base ............................................... 5  
Screen Position Adjustment........................ 5  
Quick Operation Chart ..................................... 5  
2. PART NAME  
Control Names ................................................. 1  
3. INSTALLATION AND CONNECTION  
AC Power Connection ...................................... 1  
Signal Cable Connection ................................. 1  
Connecting to VGA Compatible System .......... 1  
Connecting to Two Computers(22" Model)...... 1  
Installation of USB Function ............................. 3  
4. OSD(On Screen Display) FUNCTIONS  
How to adjust the screen .................................. 1  
Adjustment Items (22" Model) ......................... 2  
Adjustment Items (19" Model) .......................... 5  
Adjustment Items (17" Model) .......................... 8  
WARNING!  
This product is not designed for use in life support  
devices and Compaq Computer Corporation makes  
no representations to the contrary. Life support de-  
vices are those devices which are used to measure,  
diagnose, or evaluate the tissue, systems or functions  
of the human body; or other devices employed to  
support or sustain life or good health.  
5. TROUBLESHOOTING  
6. SPECIFICATIONS  
22" Model.......................................................... 1  
19" Model.......................................................... 2  
17" Model.......................................................... 3  
7. APPENDIX  
Monitor Signal Input Connector (DB9-15P) ..... 1  
SC-B104 Signal Cable ..................................... 1  
Trademark  
2000 Compaq Computer Corporation.  
COMPAQ and the Compaq logo are  
registered in the U.S. Patent and  
Trademark Office. Microsoft, Windows,  
and Windows NT are trademarks of  
Microsoft Corporation. All other product  
names mentioned herein may be  
trademarks of their respective companies.  
Compaq shall not be liable for technical or  
editorial erros or omissions contained  
herein. The information in this document is  
subject to change without notice. First  
Edition August 2000. ENERGY STAR is a  
U.S. registered mark.  
- 1 -  
1 INTRODUCTION  
Congratulations on your purchase of the high resolution  
color monitor. We designed this monitor to provide you  
with years of reliable trouble-free operation.  
monitor features On Screen Display (OSD) of all moni-  
tor set-up and adjustment functions.  
For use in a variety of applications, the monitor com-  
plies with UL 1950, CSA C22.2 No.950 and EN60950  
for safety, FCC Class-B, VCCI Class-B and EN55022  
Class-B for EMI, MPR-II, ISO 9241-3, ISO9241-7 and  
ISO9241-8 for ergonomics. The monitor also complies  
with TCO’99 guideline for environmental safe use.  
Thisguidetellsyouhowtoconnect,adjustandcareforyour  
monitor. This guide also provides technical specifications  
and instructions for troubleshooting any basic problems  
you may experience with your monitor.  
Features  
The world's standard DIAMONDTRON NF CRT up-  
graded with improved focus and convergence for super  
sharp and pure picture images.  
This monitor is an intelligent, microprocessor-based moni-  
tor compatible with most analog RGB (Red, Green, Blue)  
display standards available in the following sizes:  
The monitor complies with Video Electronics Stan-  
dards Association (VESATM) DDCTM1/2B(EDID) speci-  
fication. If your computer is Plug & Play compliant  
setup will be done automatically.  
45 cm/17" (41cm/16" Diagonal Viewable Image)  
50 cm/19" (46 cm/18" Diagonal Viewable Image)  
55cm/22" (51cm/20" Diagonal Viewable Image)  
It provides crisp text and vivid color graphics.  
The monitor provides:  
fine 0.25mm aperture grille pitch/Maximum address-  
able resolution of 1600 x 1200 (17")  
The monitor’s wide auto-scanning compatibility range  
makes it possible to upgrade video cards or software  
without purchasing a new monitor.  
fine 0.24mm (for Northern hemisphere and 0.25/  
0.27mm for Southern hemisphere aperture grille pitch/  
Maximum addressable resolution of 1920 x 1440 (19")  
Digitally controlled auto-scanning is done using an  
internal microprocessor. The microprocessor-based  
intelligence allows the monitor to operate in each  
frequency mode with the precision of a fixed frequency  
monitor. The monitor operates in the following frequen-  
cies:  
fine 0.24mm aperture grille pitch/Maximum address-  
able resolution of 2048 x 1536 (22")  
The monitor has a contrast enhancement function  
(FPM: Fine Picture Mode) to accentuate pictures and  
graphical image.  
17" Monitor - horizontal scan frequencies between  
30kHz and 96kHz, and vertical scan frequencies be-  
tween 50Hz and 130Hz  
19" Monitor - horizontal scan frequencies between  
30kHz and 108kHz, and vertical scan frequencies  
between 50Hz and 140Hz  
22" Monitor - horizontal scan frequencies between  
30kHz and 121kHz, and vertical scan frequencies  
between 50Hz and 160Hz.  
The monitor contains resident memory for pre-pro-  
grammed screen display standards and is also ca-  
pable of storing additional user adjustment param-  
eters.  
The monitor is capable of producing a non-interlaced  
maximum addressable resolution format of 1600 dots  
x 1200 lines (17" monitor), 1920 x 1440 lines (19"  
monitor) and 2048 dots x 1536 lines (22" monitor). This  
display is well suited for windowing environments.  
Because of the analog signal inputs, the monitor can  
display an unlimited palette of colors that can be  
manually adjusted to suit your specific needs.  
The monitor has a power management function ac-  
corded to VESATM-DPMSTM-standard. To save energy,  
the monitor must be connected to a system compliant  
with the VESATM -DPMSTM-standard. (Refer to your  
computer and/or video card instructions for proper  
operation.)  
To ensure ease of installation and ongoing use, the  
- 2 -  
17" Model  
Internal Preset Memory Capability  
PRESET  
Polarity  
To minimize adjustment needs, the factory has preset  
popular display standards into the monitor, as shown in  
Table 1. If any of these display standards are detected by  
the microprocessor, the picture size and position are  
automatically adjusted. All of the factory presets may be  
overwritten by adjusting the user controls. This monitor is  
capable of automatically storing up to 15 additional display  
standards (22" model) or 16 additional display standards  
(17" and 19" models). The new display information must  
differ from any of the existing display standards by at least  
1kHz for the horizontal scan frequency or 1Hz for the  
vertical scan frequency or the sync signal polarities must  
be different.  
TIMING  
480 N.I.  
Fh(kHz) Fv (Hz)  
H
-
+
+
+
+
+
+
+
V
+
+
+
+
+
+
+
+
640  
640  
720  
800  
800  
1024  
1024  
1152  
1280  
1280  
1600  
x
31.5  
43.3  
31.5  
46.9  
53.7  
60.0  
68.7  
68.7  
80.0  
91.1  
93.7  
60.0  
85.0  
70.1  
75.0  
85.1  
75.0  
85.0  
75.1  
75.0  
85.0  
75.0  
x
x
x
x
x
x
x
x
x
x
480 N.I.  
400 N.I.  
600 N.I.  
600 N.I.  
768 N.I.  
768 N.I.  
870 N.I.  
1024 N.I.  
1024 N.I.  
1200 N.I.  
Table 1. Memory Buffer Factory Presets  
22" Model  
Power Management Function  
PRESET  
TIMING  
Polarity  
The monitor has a power management function which  
reduces the power consumption of the monitor when not  
in use.  
The power saving mode is invoked by a VESA DPMS-  
compliant computer. Check your computer's manual for  
setting this function.  
Fh(kHz) Fv (Hz)  
H
V
640  
640  
720  
800  
800  
1024  
1024  
1152  
x
x
x
x
x
x
x
x
480 N.I.  
31.5  
43.3  
31.5  
46.9  
53.7  
75.0  
68.7  
68.7  
64.0  
80.0  
91.1  
93.8  
106.3  
83.6  
106.3  
120.4  
90.0  
112.5  
60.0  
85.0  
70.1  
75.0  
85.1  
75.1  
85.0  
75.1  
60.0  
75.0  
85.0  
75.0  
85.0  
60.0  
75.0  
85.0  
60.0  
75.0  
-
-
480 N.I.  
400 N.I.  
600 N.I.  
600 N.I.  
768 N.I.  
768 N.I.  
870 N.I.  
-
+
+
+
+
+
+
+
+
+
+
+
+
-
+
+
+
+
+
+
+
+
+
-
22" Model  
Mode  
Power Power-On Indicator  
(with no USB  
1280 x 1024 N.I.  
1280 x 1024 N.I.  
1280 x 1024 N.I.  
1600 x 1200 N.I.  
1600 x 1200 N.I.  
1792 x 1344 N.I.  
1792 x 1344 N.I.  
1800 x 1350 N.I.  
1920 x 1440 N.I.  
1920 x 1440 N.I.  
operation)  
Normal  
Power Saving Mode  
140 W  
< or = 5 W  
Green  
Amber  
19" Model  
Mode  
Normal  
Power  
Power-On Indicator  
Green  
-
-
120 W  
Power Saving Mode  
< or = 5 W  
Amber  
-
-
+
+
17" Model  
19" Model  
Mode  
Normal  
Power Saving Mode  
Power Power-On Indicator  
PRESET  
TIMING  
Polarity  
95 W  
Green  
Amber  
Fh(kHz) Fv (Hz)  
H
-
V
+
-
< or = 5 W  
720  
640  
640  
800  
800  
1024  
1024  
1152  
x
x
x
x
x
x
x
x
400 N.I.  
480 N.I.  
480 N.I.  
600 N.I.  
600 N.I.  
768 N.I.  
768 N.I.  
870 N.I.  
31.5  
31.5  
43.3  
46.9  
53.7  
60.0  
68.7  
68.7  
80.0  
91.1  
106.3  
90.0  
93.8  
106.3  
70.0  
60.0  
85.0  
75.0  
85.1  
75.0  
85.0  
75.1  
75.0  
85.0  
75.0  
60.0  
75.0  
85.0  
+
+
+
+
+
+
-
DDC  
+
+
+
+
+
+
+
+
+
+
The monitor includes the VESA DDCTM1 and DDCTM2B  
feature. DDC (Display Data Channel) is a communication  
channel over which the monitor automatically informs the  
computer system about its capabilities (e.g. each sup-  
ported resolution with its corresponding timing). DDC is  
routed through previously unused pins of the 15-pin VGA  
connector. The system will “Plug and Play” if both monitor  
and computer implement the DDC protocol.  
1280 x 1024 N.I.  
1280 x 1024 N.I.  
1792 x 1344 N.I.  
1920 x 1440 N.I.  
1600 x 1200 N.I.  
-
+
+
1600  
x
1200 N.I.  
- 3 -  
LocationConsiderations  
When setting up and using the monitor, keep the following in mind:  
For optimum viewing, avoid placing the monitor against a  
bright background or where sunlight or other light sources  
may reflect on the display area of the monitor. Place the  
monitor just below eye level.  
Place the monitor away from strong magnetic or electromag-  
netic fields, such as high capacity transformers, electric  
motors, large current power lines, steel pillars, etc....  
Magnetism can cause distortion in the picture and/or color  
purity.  
Avoid covering the slots or openings of the monitor. Allow  
adequate ventilation around the monitor so the heat from the  
monitor can properly dissipate. Avoid putting the monitor  
into any enclosure that does not have adequate ventilation.  
Avoid exposing the monitor to rain, excessive moisture, or  
dust, as this can cause a fire or shock hazard.  
Avoid placing the monitor, or any other heavy object, on the  
power cord. Damage to the power cord can cause a fire or  
electrical shock.  
When transporting the monitor, handle it with care.  
CleaningYourMonitor  
When cleaning the monitor, please follow these guidelines:  
Always unplug the monitor before cleaning.  
Wipe the screen and cabinet front and sides with a soft  
unspoil cloth to prevent causing imperfections.  
If the screen requires more than dusting, apply water or  
neutral detergent to a soft cloth to clean the monitor screen.  
CAUTION  
Do not use benzene, thinner or any volatile substances to  
clean the unit as the finish may be permanently marked.  
Never leave the monitor in contact with rubber or vinyl for  
an extended time period.  
Do not spray directly on the screen as cleaner may drip into  
the monitor and damage the circuitry.  
Never use an abrasive cleaner on the screen surface as  
this will damage the anti-reflection coating.  
- 4 -  
Quick Operation Chart  
Unpacking  
To summarize the steps in connecting your computer with  
the color monitor and setting the necessary controls and  
switches, refer to the chart below.  
After you unpack the box you should have all of the items  
indicated below. Save the box and packing materials in  
case you transport the monitor.  
2
3
1
Connect the color monitor and computer with  
the necessary cords and cables.  
See  
Section 3. INSTALLATION AND CONNECTION  
5
4
Turn on the color monitor.  
4. User's Guide  
(this document)  
1. Color Monitor  
2. AC Power Cord  
3. Signal Cable  
5. USB Upstream Cable  
(22" model only)  
Turn on the computer.  
Set the controls.  
Tilt/Swivel Base  
The monitor comes with a tilt/swivel base. This enables  
you to position the monitor at the best angle and tilt for  
maximum viewing comfort.  
See  
Section 4. OSD(On Screen  
Display) FUNCTIONS  
Screen Position Adjustment  
OK  
Adjust the tilt and rotation of the monitor by placing your  
hands at opposite sides of the case. You can adjust the  
monitor 90 degrees right or left, 10 degrees up or 5 degrees  
down (22" model), or 15 degrees up or 5 degrees down (17"  
and 19" models) as shown below.  
If a problem appears.  
OK  
See Section 5. TROUBLESHOOTING  
If the problem persists.  
22" Model  
10  
90  
90  
Call for your authorized Compaq  
Product Support.  
5
17" and 19" Models  
15  
90  
90  
5
CAUTION  
Keep your fingers away from the pivot area of the tilt/swivel  
base.  
- 5 -  
2 PART NAME  
Control Names (17" & 19" Models)  
See figures below for the location of the user controls,  
indicator and connectors. Each part is identified by number  
and is described individually.  
REAR  
FRONT  
D-SUB  
D-sub  
7. ACPOWERCONNECTOR  
1. POWER SWITCH: A push-on / push-off switch for AC  
power.  
8. SIGNALINPUTCONNECTOR(DB9-15P)  
2. POWER-ON INDICATOR: This indicator illuminates  
green when AC power is on, and illuminates amber  
when the monitor is in the power management  
modes.  
3. FPM (FINE PICTURE MODE): Push to turn FPM on  
and off. The normal(default) status is "off", but turning  
this function "on" may improve camera type image  
renderings. Select the status which provides the  
most pleasing image.  
Note that only standard color is selected when FPM  
is on.  
4. DOWN BUTTON: Push to select group icon.  
5. ITEM SELECT BUTTON: Push to select the item icon  
to be adjusted.  
6. FUNCTIONADJUSTBUTTONS: Pushtheadjust  
buttons to adjust the function that has been selected  
by the down button and item select button.  
- 1 -  
Control Names (22" Model)  
REAR  
See figures below for the location of the user controls, indicator  
and connectors.  
FRONT  
FRONT  
SIGNAL-A  
SIGNAL-B  
1/2  
3
SIGNAL-A  
SIGNAL-B  
2
1
/
3
9
7. AC POWER CONNECTOR  
1. POWER SWITCH: A push-on / push-off switch for AC  
power.  
8. SIGNALINPUTCONNECTOR(SIGNALA):DB9-15P  
2. POWER-ON INDICATOR: This indicator illuminates  
green when AC power is on, and illuminates amber  
when the monitor is in the power management modes.  
9. SIGNALINPUTCONNECTOR(SIGNALB):DB9-15P  
10. USB UPSTREAM PORT: To connect to a USB  
3. INPUT CONNECTOR SELECT/OSD OFF BUTTON:  
equipped computer for Monitor Control Function.  
Without OSDscreen, pushtoselectthesignalinput  
connector, SIGNAL A or B.  
With OSD screen, push to turn the OSD screen off.  
11. USB DOWNSTREAM PORT: To connect to USB  
equipped peripherals, e.g. USB camera, keyboard,  
printer, etc.  
If only one input is used, the monitor will select it automati-  
cally.  
4. DOWN BUTTON: Push to select group icon.  
5. ITEM SELECT BUTTON: Push to select the item icon.  
6. FUNCTION ADJUST BUTTONS: Push the adjust but-  
tons to adjust the image on the screen.  
- 2 -  
3
INSTALLATIONAND  
CONNECTION  
17" and 19" Models  
Signal Cable Connection  
Onthebackofthemonitortwokindsofplug-inconnections  
are provided: AC power connector for the AC input, DB9-  
15P connector for video signal input.  
The DB9-15P(VGA) connector is provided for compatible  
analog RGB outputs from your computer.  
Connecting to VGA Compatible System  
AC Power Connection  
The figure below shows the SC-B104 cable connection to  
the Video Graphics Array (VGA) port in any VGA compat-  
ible system.  
One end of the AC power cord is connected to the AC  
powerconnectoronthebackofthemonitor. Theotherend  
is plugged into a properly grounded three-prong AC  
outlet. The monitor’s auto-sensing power supply can  
automatically detect 100-120V AC or 220-240V AC and  
50 or 60Hz.  
1. Power off, both the monitor and the computer.  
2. ConnecttheoneendoftheSC-B104cabletotheDB9-  
15P connector on the VGA controller card.  
3. Connect the other end of the SC-B104 cable to the  
DB9-15P receptacle on the back of the monitor.  
4. Power on the monitor, then the computer.  
5. After using the system, power off the monitor, then the  
computer.  
Signal Cable Connection  
The attached signal cable provides a DB9-15P connector  
for the VGA compatible analog RGB outputs on your  
computer. The figure below shows the included signal  
cable connection to the Video Graphics Array (VGA) port.  
Computer  
SIGNAL-A  
SIGNAL-B  
1. Power off, both the monitor and the computer.  
2. Connect one end of the signal cable to the DB9-15P  
connector on the VGA controller card.  
1
2
3
VGA  
Compatible  
System  
SIGNAL-A  
SIGNAL-B  
3. Connect the other end of the signal cable to the DB9-  
15P receptacle on the back of the monitor.  
4. Power on the monitor, then the computer.  
5. Afterusingthesystem,poweroffthemonitor,then the  
computer.  
Cable SC-B104  
Power Cord  
CAUTION  
Computer  
The socket-outlet shall be installed near the equipment  
and shall be easily accessible. During servicing, discon-  
nect the plug from the socket-outlet.  
D-sub  
VGA  
Compatible  
System  
D-sub  
DB9-15P  
Connecting to two computers (22" Model)  
The figure below shows the connection to two computers.  
Cable SC-B104  
Power Cord  
CAUTION  
The socket-outlet shall be installed near the equipment  
and shall be easily accessible. During servicing, discon-  
nect the plug from the socket-outlet.  
D-SUB  
D-SUB  
B
Computer B  
Computer A  
22" Model  
SIGNAL-A  
SIGNAL-B  
On the back of the monitor three kinds of plug-in connec-  
tions are provided: AC power connector for the AC input,  
and two DB9-15P connectors for video signal input and  
USB ports for USB communication.  
VGA  
Cable SC-B104  
AC Power Connection  
OneendoftheACpowercordisconnectedtotheACpower  
connector on the back of the monitor. The other end is  
plugged into a properly grounded three-prong AC outlet.  
The monitor’s auto-sensing power supply can automati-  
cally detect 100-120V AC or 220-240V AC and 50 or 60Hz.  
- 1 -  
22" Model  
USB System Basic Application  
REAR  
Power Cord  
SIGNAL-A  
SIGNAL-B  
2
1
3
DownstreamPorts  
SIGNAL-B  
SIGNAL-A  
1
2
3
USB  
Cable  
Upstream  
Port  
Signal  
Cable  
Computer  
Scanner  
Camera  
Keyboard  
N O T E  
The computer is required to have Windows® 98 or later installed and USB functions.  
- 2 -  
Installation of USB Function  
(a) Disconnect and connect the USB cable to the up-  
stream port of the display monitor.  
(b) Cycle power of the display monitor off then on.  
The following procedure permits your computer to recog-  
nize or "enumerate"(A USB term) the USB HUB.  
1. Power on the display monitor and then the  
computer.  
N O T E  
2. Start "Enumeration" from the Windows® Desktop.  
If the mark appears with “Generic USB HUB”, then  
enumeration was unsuccessful. Select “Generic USB  
N O T E  
HUB” marked with  
mark and click “Remove” and  
• During the enumeration of the USB Hub, connect the  
keyboard and mouse, to the computer and not to the  
downstream ports on the display monitor. After the  
enumeration, the keyboard and mouse can be used by  
connecting to the downstream ports, if they are USB-  
compliant.  
“Refresh”. After that, the enumeration is automatically  
started.  
N O T E  
The enumeration of USB HUB may be necessary for  
each USB port on the computer.  
• Do not unplug the USB cable during the enumerations.  
(1) Connect the computer and the display monitor with an  
USB cable. The screen below will appear.  
(2) Click “Next”.  
(3) Click “Finish” on the second screen to complete the  
enumeration of the USB HUB.  
Youcan confirmthattheUSBHUBissuccessfullyenumer-  
ated with the following method.  
Open “Device Manager” tab in “System” property  
under “Control Panel”. Confirm that “Generic USB  
HUB” is listed in “Universal Serial Bus Controller”. If  
you can’t confirm it, re-enumerate the USB HUB  
again by following (a) or (b).  
- 3 -  
4 OSD (On Screen Display)  
FUNCTIONS  
How to adjust the screen  
(5) Adjust by pressing  
or  
button.  
The monitor has an OSD(On Screen Display) function.  
The following procedure shows how to adjust the screen  
using the OSD function.  
(6) If you don't press any button for about 12 seconds,  
the OSD screen will disappear.  
(1) Turn on the monitor.  
The 22" model OSD can be turned off quickly by  
pressing the OSD OFF button.  
(2) Press button  
screen.  
to display the OSD  
CONTRAST  
(3) Select the group icon on Main Menu by pressing  
.
CONTRAST  
Main Menu  
(4) Select the item icon on Sub Menu by pressing  
button.  
Sub Menu  
CONTRAST  
N O T E  
When pressing both  
and  
buttons simultaneously,  
moving direction of item selection becomes reverse.  
- 1 -  
AdjustmentItems  
22" Model  
X:Available  
Items  
Function  
A
B
C
D
CONTRAST  
Adjusts the contrast level.  
X
X
X
X
X
X
X
X
X
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
X
X
BRIGHT  
COLOR NO  
Adjusts the black level of the screen  
Select the desired color from Color 1, Color 2, and Color 3 presets.  
Adjusts the red-color balances for the selected color.  
Adjusts the green-color balances for the selected color.  
Adjusts the blue-color balances for the selected color.  
Adjusts the color temperature of the image on the screen.  
Restores the each color gain and color temperature to the factory preset.  
Adjusts the horizontal size of the image on the screen.  
Adjusts the horizontal position of the image on the screen.  
Adjusts the vertical size of the image on the screen.  
Adjusts the vertical position of the image on the screen.  
Straightens the left and right sides of the image on the screen.  
Adjusts the parallelism of the left and right sides of the image on the screen.  
Adjusts the pincushioning at the top corners of the screen.  
Adjusts the pincushioning at the bottom corners of the screen.  
Adjusts the curvature of the left and right sides of the image on the screen.  
Adjusts the vertical slant or tilt of the screen image.  
Centers the linearity of the vertical axis of the screen.  
Adjusts the linearity of the vertical axis of the screen.  
Adjusts the rotation of the image on the screen.  
R-GAIN  
X
X
X
X
-
X
X
X
X
-
G-GAIN  
B-GAIN  
COLOR TEMPERATURE  
COLOR RESET  
HORIZ-SIZE  
-
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
HORIZ-PHASE  
VERT-SIZE  
VERT-POSITION  
PINCUSHION  
KEYSTONE  
TOP-PIN  
BOTTOM-PIN  
PIN-BALANCE  
KEY-BALANCE  
VERT-LIN-BALANCE  
VERT-LIN  
ROTATION  
X
-
ZOOM  
Zooms the screen to all sides.  
X
-
GEOMETRY RESET  
FINE PICTURE MODE  
HORIZ-CONVERGENCE  
VERT-CONVERGENCE  
CORNER PURITY (TL)  
CORNER PURITY (TR)  
CORNER PURITY (BL)  
CORNER PURITY (BR)  
MOIRE CANCEL  
Restores to the factory preset level.(See "NOTE" below.)  
Selects the status which provides the most pleasing image.  
Adjusts the horizontal alignment of the red, green and blue beams.  
Adjusts the vertical alignment of the red, green and blue beams.  
Adjusts the purity of the top-left corners of the screen.  
Adjusts the purity of the top-right corners of the screen.  
Adjusts the purity of the bottom-left corners of the screen.  
Adjusts the purity of the bottom-right corners of the screen.  
When setting to ON, the moire level on the screen can decreased by the MOIRE  
CANCEL LEVEL.  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
MOIRE CANCEL LEVEL  
Adjusts the moire level on the screen.  
X
-
X
X
CLAMP PULSE POSITION Uses this function to eliminate excessive green or white background that may occur  
when both Sync-On-Green and external sync signals are applied to the monitor.  
Selects video level 1.0V or 0.7V. (0.7V Standard)  
VIDEO LEVEL  
DEGAUSS  
X
-
Eliminates possible color shading or impurity.  
-
-
POWER SAVE  
When setting to ON, the power consumption of the monitor will be reduced when not in use  
if your computer is set for power management.  
X
X
CONTROL LOCK  
OSD POSITION  
ALL RESET  
Locks the OSD function except for "BRIGHT" and "CONTRAST".  
Moves the OSD screen position.  
Restores all items to the factory preset level.(See "NOTE" below.)  
Adjusts the screen size and distortion automatically.  
X
X
-
X
-
-
-
-
-
-
GTF AUTO ADJUST  
DIAGNOSIS  
-
-
Indicates the current scanning frequency, factory or user preset timing number, and -  
signal input connector.  
-
-
LANGUAGE  
Selects the language used on OSD screen.  
X
A. Press "GEOMETRY RESET" to restore to the factory preset level.  
B. Press and buttons together, to restore to the factory preset level.  
C. Press "ALL RESET" to restore to the factory preset level.  
D. Set data does not change by the change of the signal timing.  
If a non-Factory Preset timing is used, "GEOMETRY RESET" and "ALL RESET" do not work.  
- 2 -  
22" Model  
Press the Minus Button  
To decrease the contrast.  
Press the Plus Button  
Group  
Icon  
Item  
Icon  
Item  
To increase the contrast.  
To increase the brightness.  
CONTRAST  
BRIGHT  
To decrease the bright-  
ness.  
To select color 1, color 2, color 3.  
COLOR NO  
R-GAIN  
To decrease red color level of the color To increase red color level of the color  
mode selected by "COLOR NO".  
mode selected by "COLOR NO".  
To decrease green color level of the  
colormodeselectedby"COLORNO".  
To increase green color level of the  
colormodeselectedby"COLORNO".  
G-GAIN  
To decrease blue color level of the  
colormodeselectedby"COLORNO".  
To increase blue color level of the  
colormodeselectedby"COLORNO".  
B-GAIN  
Todecreasethecolortemperatureofthe To increase the color temperature of the  
COLOR TEMPERATURE  
color mode selected by "COLOR NO".  
color mode selected by "COLOR NO".  
To restore the color-gain and color tem-  
perature of the color mode selected by  
"COLOR NO" to the factory preset.  
COLOR RESET  
HORIZ-SIZE  
To narrow the width of the image  
on the screen.  
To expand the width of the image  
on the screen.  
To move the image on the screen  
to the right.  
To move the image on the screen  
to the left.  
HORIZ-PHASE  
VERT-SIZE  
To narrow the height of the image  
on the screen.  
To expand the height of the image  
on the screen.  
To move the image  
down.  
To move the image up.  
VERT-POSITION  
PINCUSHION  
To expand the center of the  
image.  
To collapse the center of the im-  
age.  
To decrease the width at the top  
of the screen image and to  
To increase the width at the top of  
thescreenimageandtodecrease  
the width at the bottom.  
KEYSTONE  
TOP-PIN  
increase the width at the bottom.  
To expand the width of the screen  
image near the corners of top.  
To narrow the width of the screen  
image near the corners of top.  
To expand the width of the screen  
image near the corners of bottom.  
To narrow the width of the screen  
image near the corners of bottom.  
BOTTOM-PIN  
PIN-BALANCE  
KEY-BALANCE  
VERT-LIN-BALANCE  
To move the top and bottom of the  
screen image to the right.  
To move the top and bottom of  
the screen image to the left.  
To make the screen slant to the  
right.  
To make the screen slant to the  
left.  
To vertically expand the bottom of To vertically compress the bottom  
the screen and compress the top. of the screen and expand the top.  
To vertically compress the center of  
the screen and expand the top and  
bottom.  
To vertically expand the center of the  
screen and compress the top and  
bottom.  
VERT-LIN  
To rotate the image counterclock-  
wise.  
To rotate the image clockwise.  
ROTATION  
ZOOM  
To narrow the screen to all sides. To expand the screen to all sides.  
To restore to factory preset level.  
GEOMETRY RESET  
- 3 -  
22" Model  
Press the Minus Button  
Press the Plus Button  
Group  
Icon  
Item  
Icon  
Item  
FINE PICTURE MODE To select the status which provides the most pleasing image.  
HORIZ-CONVERGENCE To adjust the horizontal beam alignment on the full screen area.  
VERT-CONVERGENCE  
CORNER PURITY(TL)  
CORNER PURITY(TR)  
CORNER PURITY(BL)  
CORNER PURITY(BR)  
MOIRE CANCEL  
To adjust the vertical beam alignment on the full screen area.  
To adjust the purity condition on the top-left corner.  
To adjust the purity condition on the top-right corner.  
To adjust the purity condition on the bottom-left corner.  
To adjust the purity condition on the bottom-right corner.  
To select the Moire Cancel mode  
on.  
To select the Moire Cancel mode  
off.  
To decrease the level of the moire-clear wave.  
MOIRE CANCEL LEVEL  
To eliminate an excessive green or white-back ground that may  
occur when both Sync-On-Green and external sync signals are  
applied to the monitor.  
CLAMP PULSE POSITION  
To clamp the video signal at  
the front of the H-Sync pulse.  
To clamp the video signal at  
the back of the H-Sync pulse.  
To select 0.7V of video input.  
To select 1.0V of video input.  
VIDEO LEVEL  
DEGAUSS  
To eliminate possible color shading or  
impurity due to magnetic effects.  
To select the power-save mode.  
(Your computer must be set for  
power management.)  
To select the constant power  
consumption mode.  
POWER-SAVE  
CONTROL LOCK  
OSD POSITION  
ALL RESET  
To lock the OSD function except for  
"BRIGHT" and "CONTRAST".  
To unlock the OSD function.  
To move the OSD screen position To move the OSD screen  
in a counter clockwise direction.  
position in a clockwise direction.  
To restore all items to the  
factory preset.  
To adjust screen size, position and  
distortions automatically.  
GTF AUTO ADJUST  
To show the current scanning frequency, Preset No., and signal input  
connection.  
DIAGNOSIS  
LANGUAGE  
To choose the language used on OSD.  
ENG.....English, FRA.....French, ESP.....Spanish,  
ITA.....Italian, GER.....German, JPN.....Japanese  
CONTROL LOCK: This is to lock the OSD function to keep the OSD screen image you set.  
Press plus button to lock the OSD function. You can adjust only "BRIGHT" and "CONTRAST" at the condition.  
Press minus button to unlock the locked condition.  
GTF: This function is available when the computer has the GTFTM function according to the VESA®GTFTM standard.  
- 4 -  
AdjustmentItems  
19" Model  
X = Available  
Items  
Function  
A
B
X
X
X
C
X
X
X
CONTRAST  
Adjusts the contrast level.  
BRIGHT  
Adjusts the black level of the screen  
COLOR TEMPERATURE  
HORIZ-SIZE  
Adjusts the color temperature of the image on the screen.  
Adjusts the horizontal size of the image on the screen.  
Adjusts the horizontal position of the image on the screen.  
Adjusts the vertical size of the image on the screen.  
Adjusts the vertical position of the image on the screen.  
Straightens the left and right sides of the image on the screen.  
Adjusts the parallelism of the left and right sides of the image on the screen.  
Adjusts the pincushioning at the top corners of the screen.  
Adjusts the pincushioning at the bottom corners of the screen.  
Adjusts the curvature of the left and right sides of the image on the screen.  
Adjusts the vertical slant or tilt of the screen image.  
Adjusts the rotation of the image on the screen.  
X
HORIZ-PHASE  
VERT-SIZE  
X
X
X
X
X
X
X
X
X
VERT-POSITION  
PINCUSHION  
KEYSTONE  
TOP-PIN  
BOTTOM-PIN  
PIN-BALANCE  
KEY-BALANCE  
ROTATION  
X
-
GEOMETRY RESET  
HORIZ-STATIC  
VERT-STATIC  
Restores to the factory preset level.(See "NOTE" below.)  
Adjusts the horizontal alignment of the red, green and blue beams.  
Adjusts the vertical alignment of the red green and blue beams.  
Adjusts the moire level on the screen.  
-
-
X
X
X
X
X
X
X
X
X
MOIRE CANCEL LEVEL  
CORNER PURITY (TL)  
CORNER PURITY (TR)  
CORNER PURITY (BL)  
CORNER PURITY (BR)  
Adjusts the purity of the top-left corners of the screen.  
Adjusts the purity of the top-right corners of the screen.  
Adjusts the purity of the bottom-left corners of the screen.  
Adjusts the purity of the bottom-right of the screen.  
X
X
X
X
CLAMP PULSE POSITION Uses this function to eliminate excessive green or white background that may occur  
when external sync signals are applied to the monitor.  
VIDEO LEVEL  
DEGAUSS  
Selects video level 1.0V or 0.7V. (0.7V Standard)  
Eliminates possible color shading or impurity.  
-
-
-
POWER-SAVE  
When setting to ON, the power consumption of the monitor will be reduced when not in use  
if your computer is set for power management.  
X
CONTROL LOCK  
OSD POSITION  
DIAGNOSIS  
Locks the OSD function except for "BRIGHT" and "CONTRAST".  
Moves the OSD screen position.  
X
X
-
Indicates the current scanning frequency, factory or user preset timing number, and  
signal input connector.  
-
-
LANGUAGE  
Selects the language used on OSD screen.  
X
A. Press "GEOMETRY RESET" to restore to the factory preset level.  
B. Press - and + buttons together, to restore to the factory preset level.  
C. Set data does not change by the change of the signal timing.  
N O T E  
If a non-Factory Preset timing is used, "GEOMETRY RESET" does not work.  
- 5 -  
19" Model  
Press the Minus Button  
To decrease the contrast.  
Press the Plus Button  
To increase the contrast.  
Group  
Icon  
Item  
Icon  
Item  
CONTRAST  
BRIGHT  
To decrease the bright-  
ness.  
To increase the bright-  
ness.  
SCREEN  
To decrease the color  
temperature.  
To increase the color  
temperature.  
COLOR TEMPERATURE  
To narrow the width of the image  
on the screen.  
To expand the width of the image  
on the screen.  
HORIZ-SIZE  
HORIZ-PHASE  
VERT-SIZE  
To move the image on the screen  
to the left.  
To move the image on the screen  
to the right.  
To narrow the height of the image  
on the screen.  
To expand the height of the image  
on the screen.  
To move the image  
down.  
To move the image up.  
VERT-POSITION  
PINCUSHION  
KEYSTONE  
To collapse the center of the im-  
age.  
To expand the center of the  
image.  
To decrease the width at the top  
of the screen image and to  
increase the width at the bottom.  
To increase the width at the top of  
thescreenimageandtodecrease  
the width at the bottom.  
GEOM-  
ETRY  
To expand the width of the screen  
image near the corners of top.  
To narrow the width of the screen  
image near the corners of top.  
TOP-PIN  
To expand the width of the screen  
image near the corners of bottom.  
To narrow the width of the screen  
image near the corners of bottom.  
BOTTOM-PIN  
PIN-BALANCE  
KEY-BALANCE  
ROTATION  
To move the top and bottom of the  
screen image to the right.  
To move the top and bottom of  
the screen image to the left.  
To make the screen slant to the  
left.  
To make the screen slant to the  
right.  
To rotate the image counterclock-  
wise.  
To rotate the image clockwise.  
To restore to factory preset level.  
GEOMETRY RESET  
- 6 -  
19" Model  
Press the Minus Button  
Press the Plus Button  
Group  
Icon  
Item  
Icon  
Item  
HORIZ-STATIC  
VERT-STATIC  
To adjust the horizontal beam alignment on the full screen area.  
To adjust the vertical beam alignment on the full screen area.  
To decrease the level of the moire-clear wave.  
MOIRE CANCEL LEVEL  
CORNER PURITY(TL)  
To adjust the purity condition on the top-left corner.  
CORNER PURITY(TR) To adjust the purity condition on the top-right corner.  
VIDEO  
CORNER PURITY(BL)  
CORNER PURITY(BR)  
To adjust the purity condition on the bottom-left corner.  
To adjust the purity condition on the bottom-right corner.  
To eliminate an excessive green or white-back ground that  
may occur when external sync signals are applied to the  
monitor.  
To clamp the video signal at the  
back of the H-Sync pulse.  
CLAMPPULSEPOSITION  
To clamp the video signal at  
the front of the H-Sync pulse.  
To select 1.0V of video input.  
To select 0.7V of video input.  
VIDEO LEVEL  
DEGAUSS  
Toeliminatepossiblecolorshadingorimpu-  
rityduetomagneticeffects.  
To select the power-save mode.  
(Your computer must be set for  
power management.)  
To select the constant power  
consumption mode.  
POWER-SAVE  
CONTROL LOCK  
OSDPOSITION  
DIAGNOSIS  
TolocktheOSDfunctionexceptfor  
"BRIGHT"and"CONTRAST".  
To permit all OSD adjustments.  
MISC.  
To move the OSD screen  
position in a clockwise direction.  
To move the OSD screen position  
in a counter clockwise direction.  
Shows the current scanning frequency and Preset No..  
To choose the language used on OSD.  
LANGUAGE  
ENG......English, FRA......French,  
GER......German, JPN......Japanese  
ESP......Spanish,  
- 7 -  
Adjustment Items  
17" Model  
X: Available  
Items  
Function  
A
B
C
CONTRAST  
BRIGHT  
Adjusts the contrast level.  
Adjusts the black level of the screen.  
X
X
X
X
X
X
COLOR TEMPERATURE Adjusts the color temperature of the image on the screen.  
HORIZ-SIZE  
HORIZ-PHASE  
VERT-SIZE  
VERT-POSITION  
PINCUSHION  
KEYSTONE  
Adjusts the horizontal size of the image on the screen.  
Adjusts the horizontal position of the image on the screen.  
Adjusts the vertical size of the image on the screen.  
Adjusts the vertical position of the image on the screen.  
Straightens the left and right sides of the image on the screen.  
Adjusts the parallelism of the left and right sides of the image on the screen.  
Adjusts the pincushioning at the top corners of the screen.  
Adjusts the pincushioning at the bottom corners of the screen.  
Adjusts the curvature of the left and right sides of the screen image.  
Adjusts the vertical slant or tilt of the screen image.  
X
X
X
X
X
X
X
X
X
X
TOP-PIN  
BOTTOM-PIN  
PIN-BALANCE  
KEY-BALANCE  
ROTATION  
Adjusts the rotation of the image.  
X
-
GEOMETRY RESET  
*MOIRE CANCEL LEVEL Adjusts the moire level on the screen.  
CLAMPPULSEPOSITION  
Restore to the factory preset level. (Only function on factory preset timing)  
-
-
-
-
X
Use this function to eliminate excessive green or white background that  
may occur when external sync signals are applied to the monitor.  
Selects video level 1.0V or 0.7V. (0.7V Standard)  
Eliminates possible color shading or impurity.  
When setting to ON, the power consumption of the monitor will be reduced  
when not in use.  
Locks the OSD function to keep the screen you desired.  
Indicates the current scanning frequency and factory or user preset  
timing number.  
VIDEO LEVEL  
DEGAUSS  
POWER-SAVE  
-
-
-
X
CONTROL LOCK  
DIAGNOSIS  
X
-
LANGUAGE  
Selects the language used on OSD screen.  
X
A. Press "GEOMETRY RESET" to restore to the factory preset level.  
B. Press and buttons together, to restore to the factory preset level.  
C. Set data does not change by the change of the signal timing.  
*Moireisaseriesofwavypatternscausedbytheinterferencebetweentheaperturegrille  
oftheCRTandtherastergeneratedbythevideocard.Adjusttheleveltotheminimum  
valueatwhichmoireisnolongerobserved.  
- 8 -  
17" Model  
Press the Minus Button  
To decrease the contrast.  
Press the Plus Button  
Group  
Icon  
Item  
Icon  
Item  
To increase the contrast.  
CONTRAST  
BRIGHT  
To increase the brightness.  
To decrease the brightness.  
SCREEN  
To decrease the color temperature.  
To increase the color tempera-  
ture.  
COLORTEMPERATURE  
When FPM is on, the color temperature is fixed to 9300K and it is not  
adjustable.  
To narrow the width of the image  
on the screen.  
To expand the width of the image  
on the screen.  
HORIZ-SIZE  
HORIZ-PHASE  
VERT-SIZE  
To move the image to the left.  
To move the image to the right.  
Toexpandtheheightoftheimage  
on the screen.  
To narrow the height of the image  
on the screen.  
To move the image down.  
To move the image up.  
VERT-POSITION  
PINCUSHION  
KEYSTONE  
To collapse the center of the  
image.  
To expand the center of the  
image.  
To increase the width at the top of  
thescreenimageandtodecrease  
the width at the bottom.  
To decrease the width at the top  
of the screen image and to  
increase the width at the bottom.  
To expand the width of the screen  
image near the corners of top.  
To narrow the width of the screen  
image near the corners of top.  
GEOMETRY  
TOP-PIN  
To expand the width of the screen  
image near the corners of bottom.  
To narrow the width of the screen  
image near the corners of bottom.  
BOTTOM-PIN  
To move the top and bottom of the To move the top and bottom of  
PIN-BALANCE  
KEY-BALANCE  
ROTATION  
screen image to the right.  
the screen image to the left.  
To make the screen slant to the  
left.  
To make the screen slant to the  
right.  
To rotate the image counterclock-  
wise.  
To rotate the image clockwise.  
To restore to factory preset level.  
GEOMETRY RESET  
MOIRE CANCEL LEVEL  
To decrease the level of the moire-clear wave.  
To eliminate an excessive green or white-back ground that  
may occur when external sync signals are applied to the  
monitor.  
To clamp the video signal at  
the front of the H-Sync pulse.  
To clamp the video signal at the  
back of the H-Sync pulse.  
CLAMPPULSEPOSITION  
VIDEO  
To select 0.7V of video input.  
To select 1.0V of video input.  
VIDEO LEVEL  
DEGAUSS  
To eliminate possible color shad-  
ing or impurity.  
To select the constant power  
consumption mode.  
To select the power-save mode.  
POWER-SAVE  
CONTROL LOCK  
DIAGNOSIS  
TolocktheOSDfunctionexceptfor  
"BRIGHT"and"CONTRAST".  
To permit all OSD adjustments.  
MISC.  
It shows the current scanning frequency and Preset No. or user mode.  
To choose the language used on OSD.  
ENG......English, ESP......Spanish, JPN......Japanese,  
GER......German, FRA......French  
LANGUAGE  
- 9 -  
Beforecallingyour1-800-OK-COMPAQforservice,please  
check that the items below are properly connected or set.  
In case of using a non-standard signal, please check the  
pin assignments and the signal timing of your computer  
with the specification outlined in Section 6. SPECIFICA-  
TIONS and Section 7. APPENDIX.  
5
TROUBLESHOOTING  
ITEMS TO CHECK  
LOCATION  
PROBLEM  
Contrast and brightness controls.  
Front  
LED On  
(Green)  
Power switch.  
AC power cord disconnected.  
Front  
Rear  
LED Off  
No  
picture  
Signal cable disconnected.  
Computer power switch.  
Power management function is active.  
Rear  
Computer  
Press any key on the keyboard  
or move the mouse.  
LED On  
(Amber)  
The following message appeared.  
Signal cable disconnected.  
Computer power switch.  
Power management function is active.  
Rear  
Computer  
Press any key on the keyboard  
or move the mouse.  
The following message appeared.  
Input signal frequency range is too high or too low for the  
monitor to synchronize with.  
Check the specification of  
graphics adapter  
ATTENNTION  
SIGNAL FRREQUENCY  
IS OUT OF RANGE.  
FH @ @244.8KHz  
FV  
@ 43.0  
PLEASE CCHANGE  
SIGNAL TTIMING.  
Do "GEOMETRY-RESET" or "ALL RESET" for a standard signal.  
Adjust HORIZ-SIZE, VERT-SIZE, HORIZ-PHASE, and  
VERT-POSITION with non-standard signals.  
Front (OSD)  
Front (OSD)  
Display is miss-  
ing, center shifts,  
ortoosmallortoo  
large of a display  
size  
Monitor may not be able to get full-screen image depend  
on signal. In this case, please select other resolution, or  
other vertical refresh timing.  
Make sure you wait a few seconds after adjusting the size  
of the image before changing or disconnecting the signal.  
Front (OSD)  
"VIDEO LEVEL" is not at the appropriate position for  
your graphics adapter output. (0.7v or 1.0Vp-p).  
Display is dark or  
too bright  
- 1 -  
ITEMS TO CHECK  
LOCATION  
PROBLEM  
Thin vertical black lines on one or both sides of the screen.  
This minor condition is caused by grille element overlap  
which can occur during shipping.  
Position an open white window over the affected area of  
the screen and maximize the brightness and contrast  
controls. This will cause localized heating of the overlap  
which will clear in a few minutes. Be sure to readjust the  
brightness and contrast controls back to the normal  
viewing levels after this procedure.  
Black vertical  
linesarevisible  
on the screen.  
A
B
• The 2 very faint thin lines across the screen are normal.  
They are caused by the aperture grille stabilization  
filaments(Damper Wires) which are required for all  
aperture grille CRTs’.  
Two fine horizontal  
lines are visible on  
the screen.  
Aperture Grille  
Shadow of  
Damper Wires  
Electron Gun  
Damper Wires  
Shadow of Damper Wires  
Aperture Grille Type  
A buzzing sound  
when power on.  
A brief vibration or hum sound that is heard just after power  
up is normal. This is caused by the automatic degaussing  
function. This sound will be heard each time the monitor is  
powered up from a cold start and each time the manual  
degauss button is used.  
6 SPECIFICATIONS  
22" Model  
Size  
55cm/22"(51cm/20" Diagonal Viewable Image)  
Mask type  
Gun  
Aperture grille  
In-line  
Deflection angle  
90°  
CRT  
Phosphors  
Red, Green, Blue EBU (medium short persistence)  
0.24mm  
Aperture grille pitch  
Phosphor pitch  
Face Plate  
0.25mm  
Anti-glare, Anti-reflection and Anti-static coating  
Dynamic Beam Forming (DBF)  
0.7Vp-p analog RGB  
Separate H, V sync.  
Focusing method  
Video  
INPUT SIGNAL  
Sync  
Input Connectors  
Input Impedance  
Horizontal  
DB9-15P x 2  
SIGNAL INTERFACE  
75 (video), 2.2k (sync.)  
30 - 121kHz  
SCANNING  
FREQUENCY  
Vertical  
50 - 160Hz  
RESOLUTION (HxV) 2048 dots x 1536 lines Non-Interlaced maximum addressable resolution format at 75Hz  
WARM-UP TIME  
30 minutes to reach optimum performance level  
BRIGHTNESS  
100cd/m2, standard full white video signal at 9300K (+ 8MPCD)  
POWER SOURCE  
BLANKING TIME  
AC100-120/220-240V±10% 50/60Hz 140W (typ.) < 155w (typ.) with USB operation>  
Horizontal  
> 2.3 µsec (typ.)  
> 450 µsec (typ.)  
ratio 4:3  
Vertical  
DISPLAY SIZE  
COLOR  
393mm x 295mm(typ.)  
5000K~9300K  
Temperature  
Humidity  
OPERATING  
ENVIRONMENT  
DIMENSIONS  
WEIGHT  
10- 35°C  
20 - 80%RH (without condensation)  
(W)19.7inch x (H)19.7inch x (D)19.0inch / (W) 500mm x (H) 500mm x (D) 482mm  
Approx. 30kg (66.14 lbs.)  
TILT/SWIVEL  
BASE  
Tilt Angle  
Swivel Angle  
Safety  
-5° - +10°  
±90°  
UL1950 (UL), CSA C22.2 No.950 (C-UL)  
EN60950 (TÜV-GS), NEMKO, SEMKO, DEMKO, FIMKO  
FCC Class-B, DOC Class-B  
EMC  
EN55022 Class-B, VCCI Class-B  
EN50082-1, EN61000-3-2, EN61000-3-3  
DHHS, HWC, Röv vom 8.1, 1987  
CE-Marking, MPR-II/TCO'91  
REGULATIONS  
X-Ray  
Other  
ISO9241-3, ISO9241-7, ISO9241-8 (TÜV-GS)  
TCO '99  
International ENERGY STAR Program  
Self-powered HUB complying with Universal Serial Bus  
Specifications Rev 1.0  
USB  
Functional  
Interface  
1 Upstream port/12 Mbps  
3 Downstream ports/12 Mbps, 1.5 Mbps (500mA max. per each  
downstream port)  
- 1 -  
19" Model  
Size  
50cm/19"(46cm/18" Diagonal Viewable Image)  
Mask type  
Gun  
Aperture grille  
In-line  
Deflection angle  
Phosphors  
Aperture grille pitch  
Face Plate  
Focusing method  
Video  
90°  
CRT  
Red, Green, Blue EBU (medium short persistence)  
0.24mm  
Anti-glare, Anti-reflection and Anti-static film  
Dynamic Beam Forming (DBF)  
0.7 or 1.0Vp-p analog RGB  
Separated H, V sync. or Composite sync  
DB9 - 15P  
INPUT SIGNAL  
Sync  
Input Connector  
Input Impedance  
Horizontal  
Vertical  
SIGNAL INTERFACE  
75 (video), 2.2k (sync.)  
30 - 108kHz  
SCANNING  
FREQUENCY  
50 - 140Hz  
1920dots x 1440lines Non-Interlaced maximum addressable resolution format at 60Hz  
Recommended Resolution: 1280 dots x 1024 lines at 85Hz  
30 minutes to reach optimum performance level  
RESOLUTION (HxV)  
WARM-UP TIME  
BRIGHTNESS  
110cd/m2(typ.), standard full white video signal at 9300K (+ 27MPCD)  
Horizontal  
2.3 µsec (typ.)  
450 µsec (typ.)  
BLANKING TIME  
Vertical  
DISPLAY SIZE  
COLORTEMPERATURE  
POWER SOURCE  
OPERATING  
ENVIRONMENT  
DIMENSIONS  
WEIGHT  
350mm x 262mm(typ.)  
5000K~9300K  
ratio 4:3  
AC100-120/220-240V±10% 50/60Hz 120W (typ.) (AC220-240V±10% 50/60Hz for Europe)  
Temperature  
Humidity  
10 - 35°C  
20 - 80%RH (without condensation)  
(W)17.9inch x (H)18.2inch x (D)18.0inch / (W) 454mm x (H) 462mm x (D) 456mm  
Approx. 23.0kg (50.7lbs.)  
TILT/SWIVEL  
BASE  
Tilt Angle  
Swivel Angle  
Safety  
-5° - +15°  
±90°  
UL1950 (UL), CSA C22.2 No.950 (CSA)  
EN60950 (TÜV-GS), NEMKO, SEMKO, DEMKO, FIMKO  
FCC Class-B, DOC Class-B, VCCI Class-B  
For only Europe:  
EMC  
REGULATIONS  
EN55022 Class-B, EN50082-1, EN61000-3-2, EN61000-3-3  
DHHS, HWC, Röv vom 8.1, 1987  
CE-Marking, MPR-II/TCO'91  
X-Ray  
Other  
TCO '99, ISO9241-3,-7, and -8 (TÜV-GS)  
International ENERGY STAR Program  
- 2 -  
17" Model  
Size  
45cm/17"(41cm/16" Diagonal Viewable Image)  
Mask type  
Gun  
Aperture grille  
In-line  
Deflection angle  
Phosphors  
Aperture grille pitch  
Face Plate  
Focusing method  
Video  
90°  
CRT  
Red, Green, Blue EBU (medium short persistence)  
0.25mm  
Anti-glare, Anti-reflection and Anti-static film  
Dynamic Beam Forming (DBF)  
0.7Vp-p analog RGB  
INPUT SIGNAL  
Sync  
Separated H, V sync. or Composite sync  
DB9 - 15P  
Input Connector  
Input Impedance  
Horizontal  
Vertical  
SIGNAL INTERFACE  
75 (video), 2.2k (sync.)  
30 - 96kHz  
SCANNING  
FREQUENCY  
50 - 130Hz  
RESOLUTION (HxV) 1600dots x 1200lines Non-Interlaced maximum addressable resolution format at 75Hz  
Recommended Resolution: 1024 dots x 768 lines at 85Hz  
WARM-UP TIME  
30 minutes to reach optimum performance level  
BRIGHTNESS  
110cd/m2, standard full white video signal at 9300K (+ 27MPCD)  
BLANKING TIME  
Horizontal  
> or = 2.7µsec (typ.)  
> or = 500 µsec (typ.)  
Vertical  
DISPLAY SIZE  
312mm x 234mm(typ.)  
5000K~9300K  
ratio 4:3  
COLORTEMPERATURE  
AC100-120/220-240V±10% 50/60Hz 95W (typ.) (AC 220-240V + or - 10% 50 Hz for Europe)  
OPERATING  
ENVIRONMENT  
DIMENSIONS  
WEIGHT  
Temperature  
Humidity  
10 - 35°C  
20 - 80%RH (without condensation)  
(W)16.1inch x (H)16.2inch x (D)17.1inch / (W) 410.2mm x (H) 412.6mm x (D) 435.3mm  
Approx. 17.5 kg (38.6 lbs.)  
TILT/SWIVEL  
BASE  
Tilt Angle  
Swivel Angle  
Safety  
-5° - +15°  
±90°  
UL1950 (UL), CSA C22.2 No.950 (C-UL)  
EN60950 (TÜV-GS), NEMKO, SEMKO, DEMKO, FIMKO  
FCC Class-B, DOC Class-B  
EN55022 Class-B  
EMC  
EN50082-1, EN60555-2, EN61000-3-3  
DHHS, HWC, Röv vom 8.1, 1987  
CE-Marking, MPR-II/TCO'91  
TCO '99, ISO9241-3,-7, and -8 (TÜV-GS)  
International ENERGY STAR Program  
REGULATIONS  
X-Ray  
Other  
- 3 -  
7 APPENDIX  
MonitorSignalInputConnector(DB9-15P)  
SC-B104SignalCable  
Approx. 1.8m  
(Female)  
2
4
5
1
3
5
4
3
2
1
10  
10  
9
6
7
8
10  
9
8
7
6
DB9-15P  
11  
11  
12  
12  
13  
13  
14  
14  
15  
15  
12  
11  
13  
15  
14  
MOUNTED ON THE REAR PANEL  
PIN ASSIGNMENTS  
DB9-15P(Male)  
DB9-15P(Male)  
PIN ASSIGNMENTS  
Pin No.  
Signal  
RED  
Pin No.  
Signal  
RED VIDEO  
1
1
2
2
GREEN  
BLUE  
GREEN VIDEO  
or COMPOSITE SYNC with GREEN VIDEO  
BLUE VIDEO  
3
4
GROUND  
3
4
5
DDC GROUND  
RED GROUND  
GROUND  
6
5
DDC GROUND  
RED GROUND  
GREEN GROUND  
BLUE GROUND  
NC  
6
7
GREEN GROUND  
BLUE GROUND  
NC  
7
8
8
9
9
10  
11  
12  
13  
14  
SYNC GROUND  
GROUND  
10  
11  
12  
13  
SYNC GROUND  
GROUND  
SDA  
SDA  
HORIZONTAL SYNC  
HORIZONTAL SYNC  
or COMPOSITE SYNC  
VERTICAL SYNC(VCLK)  
SCL  
VERTICAL SYNC(VCLK)  
SCL  
15  
14  
15  
DDC ............... DISPLAY DATA CHANNEL  
SDA ................ SERIAL DATA  
SCL ................ SERIAL CLOCK  
NC .................. NO-CONNECTION  
DDC................... DISPLAY DATA CHANNEL  
SDA ................... SERIAL DATA  
SCL ....................SERIAL CLOCK  
NC .....................NO-CONNECTION  
Regulatory Compliance  
Notices  
Federal Communications Commission Notice  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio or television technician for help.  
Modifications  
The FCC requires the user to be notified that any changes or modifications made  
to this device that are not expressly approved by Compaq Computer Corporation  
may void the user’s authority to operate the equipment.  
Cables  
Connections to this device must be made with shielded cables with metallic RFI/  
EMI connector hoods in order to maintain compliance with FCC Rules and  
Regulations.  
Declaration of Conformity for products marked with the FCC logo - United  
States only  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) this device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
For questions regarding your product, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 530113  
Houston, Texas 77269-2000  
Or, call  
1-800- 652-6672 (1-800-OK COMPAQ)  
For questions regarding this FCC declaration, contact:  
Compaq Computer Corporation  
P. O. Box 692000, Mail Stop 510101  
Houston, Texas 77269-2000  
Or, call  
(281) 514-3333  
Canadian Notice  
This Class B digital apparatus meets all requirements  
of the Canadian Interference-Causing Equipment Regulations  
Avis Canadien  
Cet appareil numérique de la classe B respecte toutes les  
exigences du Règlement sur le matériel brouilleur du Canada.  
European Union Notice  
Products with the CE Marking comply with both the EMC  
Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC)  
issued by the Commission of the European Community.  
Compliance with these directives implies conformity to the following European  
Norms (in brackets are the equivalent international standards):  
! EN55022 (CISPR 22) - Electromagnetic Interference  
! EN50082-1 (IEC801-2, IEC801-3, IEC801-4) - Electromagnetic Immunity  
! EN60950 (IEC950) - Product Safety  
Japanese Notice  
Energy Star  
Monitors that are marked with the Energy Star Logo meet the requirements  
of the EPA Energy Star program. As an Energy Star Partner, Compaq  
Computer Corporation has determined that this product meets the Energy  
Star guidelines for energy efficiency. Specific details on using the Energy  
Saving features can be found in the energy saver or power management  
section of the computer manual.  
216028-001  

Hotpoint CRA User Manual
GE DECT 28166 User Manual
Electrolux RM 850CN User Manual
Daewoo CMC 710B User Manual
Cypress CY7C1520JV18 User Manual
Cannon 50cm Free Standing Electric Cooker C50ELW User Manual
Bosch Appliances DHG601DUC User Manual
Asus P5SD2 X SE User Manual
Asus P5GDC V User Manual
Asus Computer Monitor VH226 User Manual