Introduction
Technical Specifications
Installation: Step 1
This booklet is a Quick Installation Guide through the basic steps
needed to install the OmniView Universal PS/2 Adapter.
Part Number:
F1DE083
MiniDIN8, USB
PS/2
Follow these steps if you are using a USB
computer system
Follow these steps if you are using a Legacy
Sun system
Keyboard & Mouse Input:
Keyboard & Mouse Output:
Video Input:
Video Output:
Enclosure:
VGA, 13W3
VGA
1. Shut down your computer. Take the included VGA cable and
connect the male end of the cable to the VGA port on the
back of the computer. Connect the female end of the VGA
cable to the Adapter.
1. Shut down your computer. Take the included 13W3 cable and
connect the end of the cable to the 13W3 port on the back
of the computer. Connect the other end of the cable to the
VGA port on the Adapter.
High-Impact Plastic
3 1⁄4"
Width:
Height:
1"
2. Take the included USB cable and connect it to the USB port
on the back of the computer. Connect the other end of the
USB cable to the Adapter.
2. Take the included miniDIN8 cable and connect it to the
designated port on the back of the computer. Connect the
other end of the miniDIN8 cable to the Adapter.
Depth:
3 1⁄2"
Weight:
3.5 oz.
Hardware Supported:
Sun & Mac®
Package Contents
Note: Specifications are subject to change without notice.
•
•
•
•
•
OmniView Universal PS/2 Adapter
Sun 13W3 Video Cable
DIN8 Cable
PS/2 Green
PS/2 Purple
Console Port
Console Port
Video Port
USB, VGA Cable Kit
Quick Installation Guide
Product Benefits
•
•
•
•
•
•
•
•
Converts Sun DIN8 and USB to PS2
Converts Sun 13W3 video to HDDB15 SVGA
Supports special Sun commands
Does not require power
Requires no software
Emulates keyboard and mouse signals
Supports Belkin ENTERPRISE Series KVM Switches
Comes with the Belkin 2-Year Warranty
MiniDIN8 Port
USB Port
VGA Port
|