DIGITAL CONVECTION OVEN / BROILER
INSTRUCTION MANUAL
HORNO DE CONVECCION / ASADOR CON PANTALLA DIGITAL
MANUAL DE INSTRUCCCIONES
Model Number / No. de Modelo:
TD-25
BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING
INSTRUCTIONS.
Avanti has a policy of continuous improvement on its products and reserves the right to change materials and specifications without
notice.
La sección en español empieza en la página 18.
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152
TABLE OF CONTENTS
Help Us Help You
4
Parts and Features
5
Important Safety Instructions
Installation Instructions
Installation of Your Appliance
Before Using Your Appliance
Using Your Appliance
6
7
7
7
7
Electrical Connection
8
Operating Your Appliance
9
Control Panel and Function Descriptions
Setting the Clock
9
10
11
12
13 - 14
15
15
16
16
17
17
18 – 22
23
TOAST – Using the Toasting Function
PIZZA – Using the Pizza Bake Function
BAKE – Using the Bake Functions (Bake, Convection, and Broil)
DEFROST – Using the Defrost Function
DEHYDRATE – Using the Dehydrate Function
Care and Maintenance
Problems with Your Appliance? - Troubleshooting Guide
Service for Your Appliance
Your Avanti Products Warranty
Instrucciones en Español
Registration Information and Registration Card
3
HELP US HELP YOU ...
Read this guide carefully.
Write down the model and serial numbers.
You'll find them on a label located on the back
side of the unit.
It is intended to help you operate and maintain
your new appliance properly.
Please write these numbers here:
Keep it handy to answer your questions.
If you don't understand something or you need
more assistance, please call:
____________________________________
Date of Purchase
Avanti Customer Service
800-220-5570
____________________________________
Model Number
Keep proof of original purchase date (such as
your sales slip) with this guide to establish the
warranty period.
____________________________________
Serial Number
Use these numbers in any correspondence or
service calls concerning your appliance.
If you received a damaged appliance,
immediately contact the dealer (or builder) that
sold you the appliance.
Save time and money. Before you call for
service, check the Problem Solver Guide. It lists
causes of minor operating problems that you
can correct yourself.
IF YOU NEED SERVICE
We're proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are some steps
to follow for further assistance.
NEXT, if you are still not pleased, write all the
details, including your telephone number, and
send it to:
Customer Service
Avanti Products
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased. In
most cases, this will solve the problem.
10880 NW 30 Street
Miami, FL 33172 USA
4
PARTS AND FEATURES
5
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock, or
injury when using your appliance, follow these
basic precautions:
aWARNINGa
When using electrical appliances, basic safety precautions should always be followed including the
following:
READ ALL INSTRUCTIONS, PRODUCT LABELS AND WARNINGS BEFORE USING THE
APPLIANCE.
• Do not touch hot surfaces, use handles or knobs. Always use oven mitts when handling hot materials and
allow metal parts to cool before cleaning. Allow the unit to cool thoroughly before putting in or taking off
parts.
• When the unit is not in use and before cleaning, unplug the appliance from the wall outlet. Make sure the
appliance is turned off before unplugging.
• To protect against risk of electrical shock, do not immerse the appliance in water or any other liquids.
• While using your appliance, you must take into consideration not to touch the surfaces as the entire
cabinet, as well as the front glass door get very hot.
• Don’t leave children alone or unattended where the appliance is hot or in operation. This appliance is not
designed to be used by children.
• We do not recommend the use of extension cords to operate this unit.
• Never use your appliance for heating the room. Your oven is not designed to heat your kitchen.
• Do not operate this or any appliance with a frayed or damaged cord or plug, after the appliance
malfunctions, is dropped or has been damaged in any manner.
• Do not use attachments not recommended by the manufacturer; they may cause fire, electric shock or
personal injury.
• Do not use outdoors or for commercial purposes.
• Do not use this appliance for other than its intended use.
• Do not let the cord dangle over the edge of a tabletop, countertop or to touch hot surfaces.
• Do not place the appliance near a hot gas, electric burner or in a heated oven.
• Extreme caution should be used when using containers constructed of other than metal or glass.
• A fire may occur if the appliance is covered or touching flammable materials, including curtains, draperies,
walls, etc., when in operation. Do not store any items on top of the appliance when in operation.
• Do not store any materials, other than manufacturer’s recommended accessories, in this unit when not in
use.
• Do not place any flammable materials in the appliance, such as paper, cardboard, plastic or any materials
that may catch fire or melt.
• Never clean the appliance with flammable liquids. The fumes can create a fire hazard or explosion.
• Do not cover the appliance with metal foil. This will cause overheating of the appliance.
• Oversized foods or metal utensils must not be inserted in the appliance as they may create a fire or risk of
electrical shock.
• Do not clean with metal scouring pads. Pieces can break off the pad and touch electrical parts involving a
risk of electrical shock.
• When broiling, use extreme caution when removing tray or disposing of hot grease.
• To turn this appliance off, press the “STOP / CANCEL” button, then remove plug from wall outlet.
• Cooked food can be very hot, especially pastry filling. Handle with care.
• Never pick up a flaming pan. Press the “STOP / CANCEL” button. Unplug the unit from the AC wall outlet.
Smother a flaming pan on a surface unit by covering the pan completely with a well fitting lid.
• Do not use water on grease fires. Flaming grease outside a pan can be put out by covering it with baking
soda, multipurpose dry chemical, or fire extinguisher. Flame in the oven can be smothered completely by
closing the oven door and turning the oven off and unplugging the unit from the A/C outlet or by using
baking soda, multipurpose dry chemical, or fire extinguisher.
This Unit Is For Household Use Only
- SAVE THESE INSTRUCTIONS -
6
INSTALLATION INSTRUCTIONS
¾
Installation of Your Appliance
Select a location for the appliance. The location should be in an open area on a flat counter where the
plug will reach an outlet.
•
•
When positioning the appliance, it should be set on a flat, steady surface.
Do not block air vents. If they are blocked during operation, the oven may overheat and eventually cause
the appliance failure.
•
Keep the appliance away from hot air, steam or splashing liquids when choosing a place to locate it,
otherwise, the unit’s operation may be adversely affected, causing it to break down.
Direct sunlight may affect the acrylic coating and heat sources may increase electrical consumption.
Plug the appliance into an exclusive properly installed grounded wall outlet. Any questions concerning
power should be directed toward a certified electrician or an authorized Avanti Products service center.
Do not place anything on the top of the oven.
•
•
•
•
Keep the appliance at least 5 inches away from rear wall to ensure the proper ventilation.
¾
Before Using Your Appliance
•
•
Remove the exterior and interior packing.
Check to be sure you have all of the following parts:
• 1 Baking/Broiling Tray
• 1 Pan Removal Tool
• 1 Oven Rack
• 1 Crumb Tray
• 1 Instruction Manual
•
•
•
Remove all the items inside your oven and clean the interior surface with lukewarm water using a soft
cloth.
Do not attempt to repair or replace any part of your oven unless it is specially recommended in this
manual.
This appliance requires 1440W and should be the only appliance operating on the same circuit.
¾
Using Your Oven
NOTICE
Before you use this oven for the first time: The heating elements have a protective coating, which
must be burned off before use. To do this, open the oven door and press the OVEN function button and
set the temperature to 250°C/480°F. Press the TIMER button and set the oven to operate for a
maximum of 20 minutes. It is important to ensure adequate ventilation during this period.
Be sure that you have removed all packing material, plastics, and have placed the oven rack in position
before plugging the cord into the outlet for use. After use allow the oven to cool down completely before
unplugging the appliance.
During usage of the oven the digital display panel will show current function being used as well as the time
remaining. At the end of a cooking cycle, the word “END” will blink in the display and a beeping noise will
continuously sound until you press the “STOP / CANCEL” button or one (1) minute has passed.
7
¾
Electrical Connection
aWarninga
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
The appliance is supplied with a molded 2-prong type plug
A short power cord is provided to reduce the hazards resulting from
entanglement or tripping over a longer cord.
An extension cord may be used with care, however, be sure the marked electrical rating is at least as great
as the rating of this appliance. The extension cord should be positioned such that it does not drape over the
counter or tabletop where it can be pulled on by children or tripped over. The electrical rating of this appliance
is listed on the rear wall of the appliance.
Do not under any circumstances cut or remove the third ground prong from the power cord supplied.
This unit requires a standard 115/120 Volts A.C. ~/60Hz electrical two flat electrical plug socket power
cord polarity
.
The cord should be secured behind the mini kitchen and not left exposed or dangling to prevent accidental
injury.
Do not pinch, knot, or bend the power cord in any manner.
To protect against electrical shock, do not immerse cord, plug, or appliance itself in water or other liquid.
Never unplug the appliance by pulling the power cord. Always grip the plug firmly and pull straight out from
the receptacle.
8
OPERATING YOUR APPLIANCE
¾
Control Panel
FUNCTION SELECTOR BUTTONS
Your oven is equipped with three (3) convenient
cooking programs:
TOAST
OVEN
PIZZA.
Using this function you can toast
bread or other baked items to
your individual taste by selecting
the shade of toasting.
By pressing the Oven function
you can select from three (3)
cooking types using the same
button.
Press
One
Time
(1)
Function
Bake
Both top and bottom
heating elements are on.
Both top and bottom
Two
heating elements are on.
Times Convection Convection fan is on and
(2)
circulates heated air
around the food.
Top&bottom heating
elements and bottom
heating element work
alternatively.
Three
Times
(3)
Broil
Use this function when cooking
most store-bought frozen pizzas.
The preset temperature and
timing will ensure that your pizza
is cooked to perfection.
Use this function when you want
to dehydrate your favorite fresh
fruits or vegetables.
CLOCK / FUNCTION DISPLAY
This display window will display the clock once set and the
current operation of the oven when in use.
Use this function to thaw frozen
foods to room temperature and
ready for cooking preparation.
Note: For best results we recommend that you
follow to specific cooking times and temperatures as
required for the dish or item that you are cooking.
Frequently check on your food(s) while cooking to
prevent over-cooking or burning.
.
9
Clock
Setting the Clock
Note: Your oven is equipped with a clock that will display the time in either a 12 hour or 24 hour (Military)
time format. Once in the CLOCK SET mode you can switch between the default 24 hour (Military)
and a 12 hour time format by pressing the CLOCK button.
Press and hold the CLOCK button until you hear a loud “beep” sound.
The word CLOCK in the display window will blink intermitently advising that you are now in the CLOCK
SET Mode.
24 Hour (Military) Time Format:
HR 24 will be displayed in the window showing the default 24 hour (Military) time format.
To set the time using the 24 hour (Military) time format simply press either the
set the hour.
or
buttons to
Each time you press either the
or
buttons the time will either increase or decrease by one
hour and will be shown in the digital display.
Press the CLOCK button again to proceed to the minutes setting and set accordingly as shown in setting
the hour. Each time you press either the or buttons the minutes will either increase or
decrease by one minute and will be shown in the digital display.
Once you have set the time (hours and minutes) press the CLOCK button to save the setting and exit the
CLOCK SET mode.
12 Hour Time Format:
To switch between the default 24 hour (Military) time and a 12 hour time format press the CLOCK button
once.
HR 12 will be displayed in the window showing the 12 hour time format.
To set the time using the 12 hour time format simply press either the
hour.
or
buttons to set the
Each time you press either the
or
buttons the time will either increase or decrease by one
hour and will be shown in the digital display.
Press the CLOCK button again to proceed to the minutes setting and set accordingly as shown in setting
the hour. Each time you press either the or buttons the minutes will either increase or
decrease by one minute and will be shown in the digital display.
Once you have set the time (hours and minutes) press the CLOCK button to save the setting and exit the
CLOCK SET mode.
10
Toasting
To Use the Toast Function:
Note:
No preheat period is required before toasting.
Place the oven rack in the middle position.
VERY LIGHT Toast
Shortest Cook Time
Place the bread to be toasted directly on the rack in the center
of the oven, close the door.
Both the top and bottom elements will operate when TOAST
function is used.
LIGHT Toast
Use this setting to reheat
Different types of bread require different toasting times.
Lighter breads and waffles require a shorter toasting time.
Darker breads, muffins, and English muffins require a
longer toasting time.
Press the TOAST function button.
The default setting for this function is Medium Light toast.
To either increase or decrease the toasting time, press the up or
down buttons to select the appropriate toasting time.
MEDIUM LIGHT Toast
DEFAULT Setting
Each time you press either the up or down buttons the toasting
time will either increase
or decrease
by one shade
and shade setting will show in the digital display. (See display
images in figure 1).
Press the
button to initiate the toast cycle.
MEDIUM Toast
When time goes the last 1 minute, display will start to read the
second, countdown until finished.
Once the toast cycle is finished the word “END” will blink in the
display and a beeping noise will sound continuously for one (1)
minute or until the STOP / CANCEL button is pressed.
MEDIUM DARK Toast
DARK Toast
Longest Cook Time
Carefully remove the food from the oven and enjoy!
Figure 1
11
PIZZA
To Use the PIZZA BAKE Function:
The oven will operate as in standard BAKE mode.
Note: The PIZZA BAKE function is a fast and convenient way to either reheat or cook most store-bought
frozen pizzas. For best results, we recommend that you follow all instructions as shown on the pizza’s
packaging as cooking times and temperatures may vary.
Arrange food on the wire rack or in the drip/baking pan.
Press the PIZZA function button “PIZZA” will light up on the display
Press the TIMER button to set the baking time by
pressing the up or down buttons; oven timer ranges
between 30 seconds and 90 minutes (time will either
increase or decrease in 1 minute and then 5 minute increments).
The default time is 20 minutes.
The temperature has been pre-set for you to 400ºF (Temperature will not show in the
display window). This default temperature cannot be changed by pressing the up or down
buttons as it has been pre-set as the default baking temperature.
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in the digital display).
At the end of the cooking cycle the word “END” will blink in the
display and a beeping noise will sound continuously for one (1)
minute or until the STOP / CANCEL button is pressed.
Carefully remove the food from the oven as the baking pan / dish will be extremely hot.
12
PRE-HEATING
Preheating the Oven:
Press the OVEN function button.
Press the TEMP button and press the up or down buttons
to set the temperature to the desired setting. (Default
temperature is 300ºF).
Press the TIMER selector button to set the pre-heat time for 15~20 minutes.
Press the START button to initiate the preheat.
At the end of the cooking cycle the word “END” will blink in the
display and a beeping noise will sound continuously for one (1)
minute or until the STOP / CANCEL button is pressed.
BAKING
To Use the BAKE Function:
Place the wire shelf in the middle position of the oven.
Arrange food to be cooked evenly in the Baking / Broiling / Drip tray or a similarly sized pan / dish that is
specifically designed for baking.
Press the OVEN function button. “BAKE” will light up on the display
Press the TEMP button and press the up or down buttons to
set the temperature to the desired setting (temperature will
either increase or decrease in 10º increments).
The default temperature is 300ºF but the oven temperature ranges from
140ºF – 410ºF.
Press the TIMER button to set the baking time by pressing the up or down buttons; from the
very beginning, default time is 30 minutes; oven timer ranges between 30 seconds and 90
minutes (if time longer than 30 minutes, it will increase in 5 minutes increments; if time
shorter than 30 minutes, it will decrease in 1 minute increments).
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in the
digital display).
At the end of the cooking cycle the word “END” will blink in the display
and a beeping noise will sound continuously for one (1) minute or until
the STOP / CANCEL button is pressed.
Carefully remove the food from the oven as the baking pan / dish will be extremely hot.
13
BAKING
To Use the CONVECTION BAKE Function:
The oven will operate as in standard BAKE mode but the interior fan will operate and circulate the air
around the food being cooked.
Arrange food on the wire rack or in the drip/baking pan.
Press the OVEN function button TWO TIMES. “FAN” will light up on the
display
Press the TEMP button and press the up or down buttons to set the temperature to the
desired setting (temperature will either increase or decrease in 10º increments).
The default temperature is 300ºF but the oven temperature ranges from 140ºF – 450ºF
Press the TIMER button to set the baking time by pressing the up or down buttons; from the
very beginning, default time is 30 minutes; oven timer ranges between 30 seconds and 90
minutes (if time longer than 30 minutes, it will increase in 5 minutes increments; if time
shorter than 30 minutes, it will decrease in 1 minute increments).
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in the
digital display).
At the end of the cooking cycle the word “END” will blink in the display
and a beeping noise will sound continuously for one (1) minute or until
the STOP / CANCEL button is pressed.
Carefully remove the food from the oven as the baking pan / dish will be extremely hot.
To Use the BROIL Function:
Arrange food on the wire rack or in the drip/baking pan.
Press the OVEN function button THREE times. “BROIL” will light up on
the display
The default broiling temperature is 450ºF .
Press the TIMER button to set the baking time by pressing the up or down buttons; from the
very beginning, default time is 30 minutes; oven timer ranges between 30 seconds and 90
minutes (if time longer than 30 minutes, it will increase in 5 minutes increments; if time
shorter than 30 minutes, it will decrease in 1 minute increments).
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in the
digital display).
Check on the food being cooked often to avoid burning.
At the end of the cooking cycle the word “END” will blink in the display and a beeping noise will
sound continuously for one (1) minute or until the STOP / CANCEL button is pressed.
Carefully remove the food from the oven as the baking pan / dish will be extremely hot.
14
Defrosting Foods
To Use the DEFROST Function:
Arrange food in the drip/baking pan.
Press the DEFROST button. “DEF” will light up on the display
The temperature is not selectable in this function as it is set for an
optimal 150ºF (will not show in display)
Press the TIMER button to set the baking time by pressing the up or down buttons; from the
very beginning, default time is 30 minutes; oven timer ranges between 30 seconds and 90
minutes (if time longer than 30 minutes, it will increase in 5 minutes increments; if time
shorter than 30 minutes, it will decrease in 1 minute increments).
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in the digital display).
Once the defrost time has elapsed, the word “END” will blind in the display
and a beeping noise will continuously sound until you press the “STOP /
CANCEL” button or one (1) minute has passed.
Carefully remove the food from the oven as the baking pan /
dish will be extremely hot.
When defrosting do not preheat the oven. Allow 15-20 minutes per side for meats or fish to defrost.
Always cook food promptly after thawing.
Dehydrating Foods
To Use the DEHYDRATE Function:
Arrange food in the drip/baking pan.
Press the DEHYDRATE button. “DEH” will light up on the display
The temperature is not selectable in this function as it is set for an
optimal 185ºF (will not show in display)
Press the TIMER button to set the baking time by pressing the up or down buttons; from the
very beginning, default time is 30 minutes; oven timer ranges between 30 seconds and 90
minutes (if time longer than 30 minutes, it will increase
in 5 minutes increments; if time shorter than 30 minutes, it will
decrease in 1 minute increments).
Press the START button to initiate the baking function.
(The cook time will appear and begin to countdown in
the digital display).
Once the defrost time has elapsed, the word “END” will blind in the
display and a beeping noise will continuously sound until you press the “STOP / CANCEL” button or one
(1) minute has passed.
Carefully remove the food from the oven as the baking pan / dish will be extremely hot.
15
CARE AND MAINTENANCE
¾
•
Cleaning Your Appliance
Before cleaning your appliance, unplug it and allow it to cool.
•
•
Remove the wire rack, drip/baking pan and crumb tray.
Use a damp cloth to wash the inside with warm water and a mild detergent. Do not immerse in water.
Abrasive cleaners, scrubbing brushes and chemical cleaners may damage the coating on this unit.
Wash the wire rack, drip/baking pan and crumb tray with a mild detergent solution.
The glass oven door should be cleaned regularly with a non-abrasive liquid cleaner.
Rinse with a damp cloth and then a dry one.
The outside of the appliance should be cleaned with mild detergent and warm water.
Occasionally wiping the surface of the burners with a trace of clean cooking oil will help to maintain
their appearance.
•
•
•
•
•
¾
Storing Your Appliance
Allow the appliance to cool completely before storing. If storing the appliance for long periods of time
make certain that the appliance is clean and free of food particles. Store the appliance in a dry location
such as on a table or countertop or in a cupboard shelf. Other than the recommended cleaning, no further
user maintenance should be necessary.
PROBLEMS WITH YOUR APPLIANCE?
You can solve many common appliance problems easily, saving you the cost of a possible service call.
Try the suggestions below to see if you can solve the problem before calling the servicer.
TROUBLESHOOTING GUIDE
PROBLEMS
POSSIBLE CAUSES/SOLUTIONS
•
•
Appliance does not operate.
•
Unit not plugged in. Plug the unit into a 120V AC/ 60 Hz
electrical outlet.
The circuit breaker tripped or a blown fuse.
Be sure that the function, temperature, timer selectors are
set and the start button has been pressed.
•
•
Only one heating element is heating
up.
•
•
Function setting selection determines which heating
element will operate.
When toasting and convection, make sure the oven is not
set to BROIL and other settings.
•
•
Heating elements are not heating up.
Overcooked/undercooked Foods
•
Heating elements will cycle
heat. Make sure function selector is positioned to desired
cooking setting.
and
to maintain proper
•
•
Incorrect temperature setting. You may have to adjust the
temperature to desired position.
Rack placement. Rack may need to be adjusted to
accommodate different foods.
•
Burnt Smell
•
•
If this occurs the first time you are using the unit, this is the
initial burn in procedure (see Installation Instructions).
Food build-up inside appliance, on heating elements or in
drip/baking pan. Refer to “Cleaning Your Appliance”
16
SERVICE FOR YOUR APPLIANCE
We are proud of our customer service organization and the network of professional service technicians
that provide service on your Avanti appliances. With the purchase of your Avanti appliance, you can be
confident that if you ever need additional information or assistance, the Avanti Products Customer
Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information
800-323-5029
Part Orders
Whatever your questions are about our products,
help is available.
You may order parts and accessories that will be
delivered directly to your home by personal
check, money order, Master Card, or Visa.
An Avanti Products authorized service center will
provide expert repair service, scheduled at a time
that is convenient for you. Our trained servicers
know your appliance inside and out.
800-220-5570
In-Home Repair Service
800-220-5570
YOUR AVANTI WARRANTY
LENGTH OF WARRANTY
WE WILL PAY FOR
FULL ONE YEAR WARRANTY FROM
DATE OF PURCHASE ON ALL PARTS
REPLACEMENT PARTS AND REPAIR
LABOR TO CORRECT DEFECTS IN
EXCEPT GLASS PARTS, AND/OR PARTS MATERIALS OR WORKMANSHIP.
DAMAGED AS A RESULT OF MISUSE
OR LACK OF REASONABLE CARE.
SERVICE MUST BE PROVIDED BY AN
AUTHORIZED SERVICE COMPANY.
FULL 30-DAY WARRANTY FROM DATE REPLACEMENT PARTS AND REPAIR
OF PURCHASE ON GLASS PARTS AND LABOR TO CORRECT DEFECTS IN
FINISH OF PORCELAIN ENAMEL,
MATERIAL OR WORKMANSHIP.
PAINTED OR BRIGHT METAL FINISHED SERVICE MUST BE PROVIDED BY AN
PARTS
AUTHORIZED SERVICE COMPANY.
CARRY IN SERVICE ONLY.
CUSTOMER WILL BE RESPONSIBLE FOR ALL TRANSPORTATION CHARGES TO
AND FROM THE AUTHORIZED SERVICE COMPANY, ALSO MAKE SURE TO SEND
A COPY OF PROOF OF PURCHASE WHEN SENDING THE UNIT FOR SERVICE
REPAIRS.
AVANTI PRODUCTS SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so
this exclusion or limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights that vary from state to state.
This warranty is not valid outside the Continental United States.
17
INSTRUCCIONES EN ESPAÑOL
PARA REDUCIR EL RIESGO DE
PRECAUCIONES IMPORTANTES
INCENDIO, DESCARGA ELECTRICA,
O DAÑO CUANDO ESTE USANDO SU
HORNO SIGA ESTAS INDICACIONES.
CUANDO USE APARATOS ELECTRICOS, SIEMPRE DEBEN TOMARSE ALGUNAS
PRECAUCIONES BASICAS DE SEGURIDAD, INCLUYENDO LAS SIGUIENTES:
Lea todas las instrucciones, las etiquetas en el producto y las advertencias antes de usar el
horno tostador.
•
•
•
No se recomienda el uso de cables o extensiones de corriente para el uso de esta unidad.
No toque las superficies calientes. Siempre use guantes cuando maneje materiales calientes y
permita que las partes metálicas se enfríen antes de limpiarlas. Permita que la unidad se enfríe
completamente antes de poner o quitar partes.
•
Desconecte el horno tostador de la toma de corriente cuando la unidad no esté en uso y antes de
limpiarla. Nota: Verifique que el horno tostador esté apagado antes de desconectarlo.
Para protegerse contra una descarga eléctrica, no sumerja el aparato en agua o en otros líquidos.
Supervisión continua es necesaria cuando este o cualquier otro aparato sea usado cerca de niños.
Este aparato no debe ser usado por niños.
•
•
•
•
No opere este ni ningún otro aparato con un cordón dañado o quemado o después de que el
aparato ha funcionado inadecuadamente o ha sido dañado en cualquier forma.
No utilice accesorios o aditamentos no recomendados por el fabricante, ya que pueden causar
incendios, descargas eléctricas o lesiones personales.
•
•
•
No se use en exteriores o con propósitos comerciales.
No use este aparato más que para lo que ha sido diseñado.
No permita que el cordón cuelgue sobre la orilla de la mesa o del mostrador o toque superficies
calientes.
•
No lo coloque sobre o cerca de quemadores de estufas de gas o eléctricas, tampoco cerca de un
horno caliente.
•
•
Tenga extremo cuidado cuando use contenedores de vidrio o metal.
Puede ocurrir un incendio si el horno tostador está en operación y en contacto o cubierto con
materiales inflamables, incluyendo cortinas, tapicería, paredes, etc. No coloque ningún objeto sobre
el aparato cuando esté en operación.
•
•
•
•
•
•
•
Cuando esta unidad no esté en operación, no almacene ningún material que no sea un accesorio
recomendado por el fabricante.
No coloque dentro del horno ningún material inflamable como papel, cartón, plástico o cualquier
material que se pueda incendiar o derretir.
No cubra la bandeja para migajas o ninguna parte del horno con papel aluminio o metálico. Esto
puede causar el sobrecalentamiento del aparato.
Los alimentos grandes o utensilios metálicos no deben ser introducidos en el horno tostador ya que
pueden causar incendios o descargas eléctricas.
No limpie la unidad con esponjas o fibras metálicas. Se pueden desprender piezas de la esponja o
fibra y tocar partes eléctricas creando el riesgo de descargas eléctricas.
Cuando prepare alimentos, tenga cuidado extremo al remover la bandeja o al desechar la grasa
caliente.
Para apagar este aparato, coloque todos los controles en la posición “0”/”OFF”.
-Esta Unidad Es Sólo Para Uso Doméstico-
Para reducir el riesgos de descarga eléctrica, este equipo posee una instalación polarizada, lo
cual requiere que la persona que instale esta unidad la conecte apropiadamente a tierra sin
invertir la posición de los cables.
18
PREPARANDO SU HORNO TOSTADOR
Si usted está usando su horno tostador por primera vez, por favor asegúrese de:
Quitar todas las etiquetas de la superficie de su tostador.
Abra la puerta del tostador y saque los documentos impresos y papeles del interior del horno tostador.
Limpie la rejilla, charola y bandeja con agua caliente y una pequeña cantidad de detergente líquido para
lavar platos, utilice una esponja suave y no abrasiva. No sumerja el horno tostador en el agua.
Seque completamente la unidad antes de utilizarla.
Seleccione un lugar para colocar el horno tostador. El lugar debe ser una área abierta sobre un
mostrador con superficie plana donde el enchufe tenga alcance a una toma de corriente.
Enchufe el cable en un tomacorriente de 120 voltios / 60Hz.
AVISO
ANTES DE USAR LA UNIDAD POR PRIMERA VEZ. LOS ELEMENTOS CALENTADORES TIENEN
UNA CAPA PROTECTIVA QUE NECESITA SER QUEMADA ANTES DE USAR EL HORNO.
PARA REMOVER LA CAPA PROTECTIVA:
ABRA LA PUERTA.
OPRIMA EL BOTON MARCADO “OVEN”.
OPRIMA EL BOTON MARCADO “TEMP”.
OPRIMA EL BOTON MARCADO “ +” HASTA QUE LA TEMPERATURA DE 250ºC/480ºF APAREZCA
EN LA PANTALLA DIGITAL.
OPRIMA EL BOTON MARCADO “TIMER”, DESPUES OPRIMA EL BOTON MARCADO “+” HASTA
QUE LA PANTALLA DIGITAL MUESTRE 20 MINUTOS.
OPRIMA EL BOTON MARCADO “START”
USTED SENTIRA UN OLOR A QUEMADO, ESTO ES NORMAL.
ASEGURESE TENER VENTILACION ADECUADA MIENTRAS HAGA ESTE PROCESO.
Programmación del reloj / “CLOCK”
Nota: El reloj de su horno mostrará la hora en formato de 12 o 24 horas.
Oprima el botón marcado “CLOCK” hasta que escuche un sonido de “BEEP” y la pantalla digital mostrará
HR24, confirmando que está en el modo de programación.
a)
Para programar la hora en formato de 24 horas, oprima los botones marcados “+” o “-“ para
seleccionar la hora. Oprima el botón marcado “CLOCK” para seguir a seleccionar los minutos
oprimiendo los botones marcados “+” o “-“. Oprima el botón marcado para programar la hora
seleccionada.
b)
Para programar la hora en formato de 12 horas, oprima el botón marcado “CLOCK” una vez, la
pantalla electrónica mostrará HR 12. Oprima los botones marcados “+” o “-“ para selccionar la hora.
Oprima el botán marcado “CLOCK” para seguir a seleccionar los minutos oprimiendo los botones
marcados “+” o “-“. Oprima el botón marcado “CLOCK” para programar la hora seleccionada.
19
FUNCIONES DE COCCION:
NOTA: Al final del ciclo del tiempo programado en cada una de las siguientes funciones de
cocción el horno se apagará, la palabra “END” aparecerá en la pantalla digital y se oirá un
sonido de “BEEP” por un minuto o cuando Ud. oprima el botón marcado “STOP / CANCEL”.
TOAST (TOSTAR)
Su horno le da la opción de selecciónar de seis (6) niveles de tostado,
cada nivel está representado por un cuadrito en la parte inferíor de la
pantalla digital. Vea la figura 1 en la pagina 11 para las imágenes de
cada nivel.
Niveles de tostado
Tostado Muy Ligero
Tostado Ligero
Tostado Medio Ligero
(Nivel pre-programado)
Tostado Medio
Tostado Medio Oscuro
Tostado Oscuro
1
2
3
Coloque la parrilla en la posición deseada antes de calentar el horno
tostador.
Oprima el botón marcado “TOAST” (TOSTAR) la palabra “TOAST” se
alumbrará en la pantalla digital. Oprima el botón marcado “-“ para
bajar el nivel de tostado ó el botón marcado “+” para aumentar el nivel
de tostado.
4
5
6
Oprima el botón marcado “Start” para empezar el ciclo de tostado.
PIZZA
Coloque la parrilla en la posición deseada antes de calentar el horno tostador.
Oprima el botón marcado “PIZZA”, la palabra “PIZZA” se alumbrará en la pantalla digital.
Oprima el botón marcado “TEMP”. La temperatura está pre-programada para 400ºF (204ºC),
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de calentamiento oprimiendo los botones
marcados “+” o “-“.
Oprima el botón marcado “Start”.
CALENTAMIENTO PREVIO DEL HORNO
Coloque la parrilla en la posición deseada antes de calentar el horno tostador.
Oprima el botón marcado “OVEN” (Horno), las palabras “OVEN” y “BAKE” se alumbrarán en la pantalla
digital.
Oprima el botón marcado “TEMP”. La temperatura está pre-programada para 300ºF (149ºC), selccione
la temperatura appropiada para su uso oprimiendo los botones marcados “+” o “-“.
Oprima el botón marcado “Timer” (Reloj) y selecciona el tiempo de calentamiento oprimiendo los botones
marcados “+” o “-“.
Oprima el botón marcado “Start” para iniciar el ciclo de cocción.
PARA USAR LA FUNCION DE HORNEAR (BAKE)
Seleccione la posición deseada de la parrilla.
Oprima el botón marcado ”OVEN” (Horno), las palabras “OVEN” y “BAKE” se alumbrarán en la pantalla
digital.
Oprima el botón marcado “Temp” (Temperatura) y seleccione la temperatura apropiado oprimiendo los
botones marcados “+” o “-“, la temperatura bajará o subirá en incrementos de 10º.
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de cocción apropiado oprimiendo los
botones marcados “+” o “-“, el tiempo aumentará o disminuirá en incrementos de 5 minutos.
Oprima el botón marcado “START” para iniciar el ciclo de cocción.
Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.
Coloque los alimentos sobre la rejilla metálica o dentro de la charola para hornear.
20
PARA USAR LA FUNCION DE HORNEAR con CONVECCION (CONVECTION BAKE)
Seleccione la posición deseada de la parrilla.
Oprima el botón marcado ”OVEN” (Horno) dos (2) veces. Las palabras “OVEN” y “FAN” se alumbrarán
en la pantalla digital.
Oprima el botón marcado “Temp” (Temperatura) y seleccione la temperatura apropiado oprimiendo los
botones marcados “+” o “-“, la temperatura bajará o subirá en incrementos de 10º.
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de cocción apropiado oprimiendo los
botones marcados “+” o “-“, el tiempo aumentará o disminuirá en incrementos de 5 minutos.
Oprima el botón marcado “START” para iniciar el ciclo de cocción.
Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.
Coloque los alimentos sobre la rejilla metálica o dentro de la charola para hornear.
PARA USAR LA FUNCION DE ASADO
Seleccione la posición deseada de la parrilla.
Oprima el botón marcado ”OVEN” (Horno) tres (3) veces. La palabra “BROIL” se alumbrará en la
pantalla digital.
La temperatura está pre-programada en 450ºF (232ºC) para esta función (temperatura más alta para
esta aplicación).
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de cocción apropiado oprimiendo los
botones marcados “+” o “-“, el tiempo aumentará o disminuirá en incrementos de 5 minutos.
Oprima el botón marcado “START” para iniciar el ciclo de cocción.
Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.
Coloque los alimentos sobre la rejilla metálica o dentro de la charola para hornear.
PARA USAR LA FUNCION DE DESCONGELADO
Seleccione la posición deseada de la parrilla.
Oprima el botón marcado ”DEFROST” (DESCONGELAR). La palabra “DEF” se alumbrará en la pantalla
digital.
La temperatura está pre-programada en 150ºF (66ºC) para esta función (temperatura más alta para esta
aplicación).
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de cocción apropiado oprimiendo los
botones marcados “+” o “-“, el tiempo aumentará o disminuirá en incrementos de 5 minutos.
Oprima el botón marcado “START” para iniciar el ciclo de cocción.
Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.
PARA USAR LA FUNCION DE DESHIDRATACION
Seleccione la posición deseada de la parrilla.
Oprima el botón marcado ”DEHYDRATE” (DESHIDRATA). La palabra “DEH” se alumbrará en la
pantalla digital.
La temperatura está pre-programada en 185ºF (85ºC) para esta función (temperatura más alta para esta
aplicación).
Oprima el botón marcado “Timer” (Reloj) y seleccione el tiempo de cocción apropiado oprimiendo los
botones marcados “+” o “-“, el tiempo aumentará o disminuirá en incrementos de 5 minutos.
Oprima el botón marcado “START” para iniciar el ciclo de cocción.
Los elementos calentadores se encenderán y apagarán alternadamente para mantener la temperatura.
Coloque los alimentos sobre la rejilla metálica o dentro de la charola para hornear.
21
LIMPIEZA DE SU HORNO TOSTADOR
Antes de limpiar su Horno Tostador, desconéctelo del tomacorriente y permita que se enfríe. Limpielo
con un paño suave y húmedo. No lo sumerja en agua! Asegúrese de usar solamente jabón suave y agua.
Los limpiadores abrasivos, cepillos y limpiadores químicos pueden dañar el acabado de esta unidad.
Vacíe la bandeja para migas frecuentemente para evitar la acumulación de residuos.
ALMACENANDO O GUARDANDO SU HORNO TOSTADOR
Deje que el aparato se enfríe completamente antes de almacenarlo. Si va a almacenar el horno tostador
por períodos prolongados, asegúrese de que no contenga partículas o residuos de alimentos. Almacene
el horno tostador en un lugar seco como encima de una mesa, mostrador, o sobre una repisa. No es
necesario otro tipo de mantenimiento que no sea la limpieza recomendada en este manual.
22
REGISTRATION INFORMATION
Thank you for purchasing this fine Avanti product. Please fill out this card and return it within 100 days of
purchase and receive these important benefits to the following address:
Avanti Products, A Division of The Mackle Co., Inc.
P.O. Box 520604 - Miami, Florida 33152 USA
¾
¾
Protect your product:
We will keep the model number and date of purchase of your new Avanti product on file to help
you refer to this information in the event of an insurance claim such as fire or theft.
Promote better products:
We value your input. Your responses will help us develop products designed to best meet your
future needs.
--------------------------------------------------------(detach here)---------------------------------------------------------------
Avanti Registration Card
__________________________________
Name
______________________________________
Model # Serial #
__________________________________
Address
______________________________________
Date Purchased Store/Dealer Name
__________________________________
______________________________________
Occupation
City
State
Zip
__________________________________
Area Code Phone Number
As Your Primary Residence, Do You:
ꢀOwn
ꢀRent
Did You Purchase An Additional Warranty: Your Age:
ꢀExtended ꢀNone ꢀunder 18 ꢀ18-25 ꢀ26-30
Reason For Choosing This Avanti Product: ꢀ31-35
ꢀ36-50 ꢀover 50
Please indicate the most important factors
that influenced your decision to purchase
this product.
Marital Status:
ꢀMarried
Is This Product Used In The:
ꢀHome ꢀBusiness
ꢀSingle
ꢀPrice
ꢀProduct Features
How Did You Learn About This Product:
ꢀAvanti Reputation
ꢀAdvertising
ꢀProduct Quality
ꢀIn Store Demo
ꢀPersonal Demo
ꢀSalesperson Recommendation
ꢀFriend/Relative Recommendation
ꢀWarranty
ꢀOther_______________________________
Comments____________________________
_____________________________________
_____________________________________
ꢀOther_______________________
23
VERSION 01
PRINTED IN CHINA
24
|