Acer X213H User Manual

Acer X213H (X223HQ)

Service Guide

Transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in

any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without

the prior written permission of Acer Incorporated.

Disclaimer

The information in this guide is subject to change without notice. Acer Incorporated makes no representations or

warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties

of merchantability or fitness for any particular purpose. Any Acer Incorporated software described in this manual is

sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not Acer

Incorporated, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any

incidental or consequential damages resulting from any defect in the software.

Intel is a registered trademark of Intel Corporation.

Pentium and Pentium II/III are trademarks of Intel Corporation.

Other brand and product names are trademarks and/or registered trademarks of their respective holders.

Trademarks

Acer is a registered trademark of Acer Incorporated.

All other trademarks are property of their respective owners.

Conventions

The following conventions are used in this manual:

Screen messages

Note

Denotes actual messages that appear on screen.

Gives bits and pieces of additional information related to the current topic.

Alerts you to any damage that might result from doing or not doing specific actions.

Gives precautionary measures to avoid possible hardware or software problems.

Remind you to do specific actions relevant to the accomplishment of procedures.

Warning

Caution

Important

Preface

Before using this information and the product it supports, please read the following general information.

1. This Service Guide provides you with all technical information relating to the BASIC CONFIGURATION decided

for Acer's "global" product offering. To better fit local market requirements and enhance product competitiveness,

your regional office may have decided to extend the functionality of a machine (e.g. add-on card, modem, or extra

memory capability). These LOCALIZED FEATURES will NOT be covered in this generic service guide. In such

cases, please contact your regional offices or the responsible personnel/channel to provide you with further

technical details.

2. Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information available on

your regional web or channel. If, for whatever reason, a part number change is made, it will not be noted in the

printed Service Guide. For ACER-AUTHORIZED SERVICE PROVIDERS, your Acer office may have a

DIFFERENT part number code to those given in the FRU list of this printed Service Guide. You MUST use the list

provided by your regional Acer office to order FRU parts for repair and service of customer machines.

Warning: (For FCC Certified Models)

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in

a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or an experienced radio/TV technician for help.

Notice:

1. The changes or modifications not expressly approved by the party responsible for compliance could void the

user's authority to operate the equipment.

2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.

3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this

equipment. It is the responsibility of the user to correct such interference.

As ENERGY STAR^®Partner our company has determined that this product meets the ENERGY STAR^®

guidelines for energy efficiency.

Warning:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerous high voltages are present

inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

Precautions

z Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in

a wet basement.

z Do not place the monitor on an unstable trolley, stand, or table. If the monitor falls, it can injure a person and

cause serious damage to the appliance. Use only a trolley or stand recommended by the manufacturer or sold

with the monitor. If you mount the monitor on a wall or shelf, uses a mounting kit approved by the manufacturer

and follow the kit instructions.

z Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable

operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered.

Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator

or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.

z The monitor should be operated only from the type of power source indicated on the label. If you are not sure of

the type of power supplied to your home, consult your dealer or local power company.

z The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit

only into a grounded power outlet as a safety feature. If your outlet does not accommodate the three-wire plug,

have an electrician install the correct outlet, or use an adapter to ground the appliance safely. Do not defeat the

safety purpose of the grounded plug.

Unplug the unit during a lightning storm or when it will not be used for long periods of time. This will protect the

monitor from damage due to power surges.

z Do not overload power strips and extension cords. Overloading can result in fire or electric shock.

z Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric

shock. Never spill liquids on the monitor.

z Do not attempt to service the monitor yourself; opening or removing covers can expose you to dangerous

voltages and other hazards. Please refer all servicing to qualified service personnel

z To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate

configured receptacles marked between 100 - 240V AC, Min. 5A.

z The wall socket shall be installed near the equipment and shall be easily accessible.

Special Notes On LCD Monitors

The following symptoms are normal with LCD monitor and do not indicate a problem.

Notes

z Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and

then turn it on again to make sure the flicker disappears.

z You may find slightly uneven brightness on the screen depending on the desktop pattern you use.

z The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a

missing pixel or a pixel lit all of the time.

z Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image,

when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image

or turning off the Power Switch for hours.

Table Of Contents

Chapter 1

Monitor Features

…………………………………………

Introduction

………………………………………

Electrical Requirements

LCD Monitor General Specification

LCD Panel Specification

Factory Preset Timing

Monitor Block Diagram

Main Board Diagram

Software Flow chart

Main Board Layout

Installation

Chapter 2

Operating Instructions

………………………………………

External Controls

………………………………………

Front Panel Controls

eColor Management (OSD)

How to Adjust a Setting

How To Optimize The DOS-Mode

Enter into the factory mode

Chapter 3

Machine Disassembly

………………………………………

Chapter 4

Chapter 5

Troubleshooting

………………………………………

Connector Information

Chapter 6

Chapter 7

FRU (Field Replacement Unit) List

………………………………………

Exploded Diagram

………………………………………

Schematic Diagram

………………………………………

Chapter 1

Monitor Features

Introduction

Scope

This short specification describes the electrical, optical and functional performance requirements for a 54.68cm

(21.5”) TFT LCD color monitor with VGA compatible interface.

Description

The LCD monitor is designed with the latest LCD technology to provide a performance oriented product with no

radiation. This will alleviate the growing health concerns. It is also a space saving design, allowing more desktop

space, and comparing to the traditional CRT monitor, it consumes less power and gets less weight in addition MTBF

target is 50k hours or more.

Chart of X213H

Panel

M215HW01 V00 XM AUO

Signal Interface

Sync Type

D-Sub 15pin；DVI 24pin

Separate / Compatible

Color Temp User Adjust

DDC

Support

DDC2B

Yes

Speaker

Headphone Jack

Microphone Jack

USB Hub

Not support

Yes /No

Tilt / Swivel

Electrical Requirements

Standard Test Conditions

All tests shall be performed under the following conditions, unless otherwise specified.

Ambient light

Dark room (< 1 cd/m²)

Viewing distance

Warm up time

25-50 cm

＞30 minutes

Analog Input signal

Control temperature

User brightness control

700 mVss

6500° K

Set to Factory preset value (cut off raster)

Set to factory preset value, which allows that the brightest two of

32 linear distributed gray-scales (0～ 700mv) can be

distinguished.

User contrast control

Picture position and size

Viewing angle

Factory preset value

(H) 90∘+/-20∘and (V) 90∘+/-10∘

230V± 5％, 50±3Hz

20+5℃

AC Supply voltage

Ambient temperature

Humidity

65% ± 20%

Display mode

e-color mode

1680 x 1050, 60 Hz, all white

Set to “User” mode

Measurement systems

The units of measure stated in this document are listed below:

1 gamma = 1 nano tesla

1 tesla = 10,000 gauss

cm = in x 2.54

Lb = kg x 2.2

Degrees F = [°C x 1.8] + 32

Degrees C = [°F - 32]/1.8

u' = 4x/(-2x + 12y + 3)

v' = 9y/(-2x + 12y + 3)

x = (27u'/4)/[(9u'/2) - 12v' + 9]

y = (3v')/[(9u'/2) - 12v' + 9]

nits = cd/(m2) = Ft-L x 3.426

lux = foot-candle x 10.76

LCD Monitor General Specification

Driving system

TFT Color LCD

Active Display Area

476.64 (H) × 268.11(V)

Pixel pitch

LCD Panel

0.282(H) x 0.282(W)

1000 : 1 Max(Typ)

5ms

Contrast Ratio

Response time

Luminance of White

Separate Sync.

300(Typ.) cd/㎡

H/V TTL

Input

H-Frequency

V-Frequency

30kHz – 80kHz

55-75Hz

Viewing angle

Display Colors

Display mode

((H) 90∘+/-20∘and (V) 90∘+/-10∘

16.7M

1680 x 1050 @60Hz

ON Mode

< 65W

< 1W

EPA ENERGY STAR®

OFF Mode

Set to factory preset value, which allows that the brightest two of 32 linear distributed

gray-scales (0～ 700mv) can be distinguished.

Contrast control

Power Source

90 V ~ 264 V，50 ± 3Hz, 60 ± 3Hz

Operating Temp: 0° to 40°C

Storage Temp: -20° to 65°C

Operating Humidity: 0% to 90%

Storage Humidity: 0% to 90%

Environmental

Considerations

Peak surge current

Power line surge

< 100 A peak at 230 VAC and cold starting&25℃ & DC Output at Full-load

No advance effects (no loss of information or defect) with a maximum of 1 half-wave

missing per second

LCD Panel Specification

General Specifications

Block Diagram

TFT LCD Module

Back light Unit

Electrical Characteristics

Optical Specifications

Factory Preset Timing

VESA MODES

Horizontal

Vertical

Nominal

Sync

Polarity

Nominal

Pixel

Frequency

+/- 0.5kHz

Polarity

Freq.

+/- 1 Hz

Mode

VGA

Resolution

Total

Clock

(MHz)

25.175

640x480@60Hz

800 x 525

31.469

59.940

640x480@72Hz

800x600@56Hz

800x600@60Hz

800x600@72Hz

1024x768@60Hz

1024x768@70Hz

1152x864@60Hz

1280x960@60Hz

1280x720@60Hz

1280x1024@60Hz

1280x800@60Hz

1360x768@60Hz

1440x900@60Hz

1680x1050@60Hz

1600x1200@60Hz

1920x1080@60Hz

832 x 520

1024 x 625

1056 x 628

1040 x 666

1344x806

37.861

35.156

37.879

48.077

48.363

56.476

67.500

60.000

44.955

63.981

49.702

47.712

55.935

65.290

75.000

67.158

67.500

66.587

N/P

72.809

56.250

60.317

72.188

60.004

70.069

75.000

60.000

59.940

60.020

59.810

60.015

59.887

59.954

60.000

59.963

60.000

69.934

N/P

31.500

36.000

40.000

50.000

65.000

75.000

108.000

74.176

108.000

83.500

85.500

106.5

SVGA

XGA

1328x806

1600 x 900

1800 x 1000

1650 x 750

1688 x 1066

1680 x 831

1792 x 795

1904 x 931

2240 x1089

2160 x 1250

2576 x 1120

2200 x 1125

2080 x 1111

VESA

SXGA

WXGA

WXGA+

WSXGA+

146.250

162.000

173.000

148.500

138.500

UXGA

IBM MODES

DOS

VGA

720x400@70Hz

640x480@67Hz

900 x 449

31.469

70.087

66.667

28.322

30.240

MAC MODES

864x525

35.000

ACER SPECIAL MODE

648x500@57.67 Hz

1024x600@60Hz

808 x 541

1312 x 622

31.199

37.320

57.67

60.000

25.209

48.964

Monitor Block Diagram

The LCD MONITOR will contain a main board, a power board and a key board which house the flat panel control

logic, brightness control logic and DDC.

The power board will provide AC to DC Inverter voltage to drive the backlight of panel and the main board chips

each voltage.

Flat Panel and

CCFL Drive.

CCFL backlight

Main Board

Power Board

AC-IN

100V-240V

Key board

DVI Signal

D-SUB Signal

Main Board Diagram

Panel Interface

(CN301)

Scalar IC NT68667UFG/C QFP-128L

(Include MCU, ADC, OSD)

(U401)

Keypad Interface

(CN402)

H sync

V sync

RGB

D-Data

D-Clock

D-Sub

Connector

(CN101)

Flash Memory

SST25VF010A-33-4C-SAE

(U402)

Crystal

12MHz

(X401)

DVI

Connector

(CN102)

Software Flow Chart

Remark:

1) MCU initializes.

2) Is the EEPROM blank?

3) Program the EEPROM by default values.

4) Get the PWM value of brightness from EEPROM.

5) Is the power key pressed?

6) Clear all global flags.

7) Are the AUTO and SELECT keys pressed?

8) Enter factory mode.

9) Save the power key status into EEPROM.

Turn on the LED and set it to green color.

Scalar initializes.

10) In standby mode?

11) Update the lifetime of back light.

12) Check the analog port, are there any signals coming?

13) Does the scalar send out an interrupt request?

14) Wake up the scalar.

15) Are there any signals coming from analog port?

16) Display "No connection Check Signal Cable" message. And go into standby mode after the

message disappears.

17) Program the scalar to be able to show the coming mode.

18) Process the OSD display.

19) Read the keyboard. Is the power key pressed?

Main Board Layout

Symbol Description

Symbol

CN402

CN701

CN301

X401

Description

U401

U703

U103

U104

IC NT68667UFG/C QFP-128L

WAFER

IC AP1117D33L-13 TO252-3L DIODES

IC AZC099-04S SOT23-6L

WAFER 9P RIGHT ANELE PITCH

CONNECTOR

IC AZC099-04S SOT23-6L

CRYSTAL 12MHz HC-49US ARG6-120

D-SUB 15PIN VERTICAL CONN WITH

SCREW

U402

IC SST25VF010A-33-4C-SAE

CN101

U702

CN102 DVI 24PIN CONN F

IC AZ1117D-1.8-E1

Installation

To install the monitor on your host system, please follow the steps below:

Steps

Chapter 2

Operating Instructions

Press the power button to turn the monitor on or off. The other control buttons are located at front panel of the

monitor. By changing these settings, the picture can be adjusted to your personal preferences.

• The power cord should be connected.

• Connect the video cable from the monitor to the video card.

• Press the power button to turn on the monitor position. The power indicator will light up.

External Controls

Front panel controls

1.Power Switch

To turn ON or OFF the power.

2.Power LED

Lights up to indicate the power is turned ON.

3.Empowering / Exit

1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT

OSD menu).

2) When OSD menu is in off status, press this button to select scenario mode.

3) When exit eColor OSD, it will activate the Auto Adjustment function

4.Auto Adjust button /

Exit

1) When OSD menu is in active status, this button will act as EXIT-KEY (EXIT

OSD menu).

2) When OSD menu is in off status, press this button for 2 seconds to activate the

Auto Adjustment function .The Auto Adjustment function is used to set the Hpos,

Vpos, Clock and Focus.

5.< / >

Press < or > to select the desired function. Press < or > to change the settings of

the current function.

6.MENU / ENTER

Activate OSD menu when OSD is OFF or activate/de-activate adjustment

function when OSD is ON.

eColor Management (OSD)

Operation instructions

Step 1: Press “

Key” to open the Acer e-Color Management OSD and access the scenario modes

Step 2: Press “<” or “>” to select the mode

Step 3: Press “Auto Key ” to confirm the mode and run Auto Adjust

How to Adjust a Setting

Adjusting the picture

How To Optimize The DOS-Mode

Plug And Play

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the

monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional

information about its display capabilities.

The DDC2B is a bi-directional data channel based on the I²C protocol. The host can request EDID information over

the DDC2B channel.

This monitor will appear to be non-functional if there is no video input signal. In order for this monitor to

operate properly, there must be a video input signal.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA)

and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees

(NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no

video-input signal present. When there is no video input signals this monitor, following a time-out period, will

automatically switch to an OFF mode. This reduces the monitor's internal power supply consumption. After the video

input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to

a "Screen Saver" feature except the display is completely off. Pressing a key on the keyboard, or clicking the mouse

restores the display.

Using the Right Power Cord

The accessory power cord for the Northern American region is the wallet plug with NEMA 5-15 style and is UL listed

and CSA labeled. The voltage rating for the power cord shall be 125 volts AC.

Supplied with units intended for connection to power outlet of personal computer: Please use a cord set consisting of

a minimum No. 18 AWG, type SJT or SVT three conductors flexible cord. One end terminates with a grounding type

attachment plug, rated 10A, 250V, and CEE-22 male configuration. The other end terminates with a molded-on type

connector body, rated 10A, 250V, having standard CEE-22 female configuration.

Please note that power supply cord needs to use VDE 0602, 0625, 0821 approval power cord in European counties.

Enter into the factory mode:

Turn off the power, press the “e-color” and turn the power on. The factory OSD will be at the left top of the panel.

Chapter 3

Machine Disassembly

This chapter contains step-by-step procedures on how to disassemble the monitor for

maintenance.

The tool for disassembly is as follows:

Screwdriver, hexagonal screwdriver, Putty knife.

Disassembly Procedure

1. Remove the hinge assembly.

2. Remove the rear cover and bezel.

The arrows in blue are the hook that we should put attention to when remove the rear cover. Use plastic

putty knife to release hooks, then you can easily remove the rear cover.

3． Remove the lamp connectors and remove the screws to remove the panel. Put attention to the LVDS cable.

4. Remove the screws to remove the main board and power board.

5. The panel

Chapter 4

Troubleshooting

This chapter provides troubleshooting information for the X213H:

1. No Power

No power

Press power key and look if the

picture is normal

Please reinsert and make sure the

AC of 100-240 is normal

Reinsert or check the

power section

Measure U703 Pin2=3.3V,

Check U703, C706 and C707

Check if X401 oscillate waveforms are

normal

Replace X401

Replace U401

2. No Picture (LED is orange)

No picture

The button if under

control

X401 oscillate

waveform is normal

Replace X401

Check reset circuit of

U401 is normal

Check Correspondent

component

Measure U703 Pin2=3.3V,

Replace U401

X401 oscillate

waveform is normal

Check U703, C706 and C707

Replace X401

Check HS/VS from

CN101 is normal

Check Correspondent

component

Replace U401

3. Panel Power Circuit

White screen

Measure Q302 base

is low level?

X401 oscillate

waveform is normal

Replace X401

Check CN301is solder

and Q302,Q301 is OK?

Check reset circuit of

U401 is normal

Check Correspondent

component.

Check Correspondent

component.

Replace U401

Replace PANEL

4. Key Board

OSD is unstable or not working

Connect Key Board

Replace Button Switch

Replace Key Board

Is Key Pad Board connecting normally?

Is Button Switch normally?

Is Key Pad Board normally?

Check Main Board

5. Power Board

1) No power

Check F801 = 14.5V

Check AC line volt 110V or 220V

Check AC input

Check the voltage of C907 (+)

Check bridge rectified circuit and F901 circuit

Check start voltage for the pin8 of U901

Check R908, R911 and Change U901

Check the auxiliary voltage is bigger than

11V and smaller than 25V

1) Check U901

2) Check R913, D904 circuit

Check U901 pin5 PWM wave

Check U901

Check Q901, U902, U903, D901, D902, D906,ZD901,Q904

2.) No Backlight

Check F801 = 14.5V

Check adapter or MB

Check Interface board

Check ON/OFF signal

Check U801 PIN12=14.5V

Change Q802, Q804

Check U801 PIN10, 9 have the output of square wave at short time

Change U801

Check Q803, Q812 PIN5, 6, 7, 8 have the output of square wave at short time.

Check Q801, Q803, Q805, Q807, Q812, Q813

Check the output of PT801

Change PT801

Check connecter & lamp

Chapter 5

Connector Information

Chapter 6

FRU (Field Replaceable Unit) List

This chapter gives you the FRU (Field Replaceable Unit) listing in global configurations of X213H. Refer to this

chapter whenever ordering for parts to repair or for RMA (Return Merchandise Authorization).

NOTE: Please note WHEN ORDERING FRU PARTS, that you should check the most up-to-date information

available on your regional web or channel (http://aicsl.acer.com.tw/spl/). For whatever reasons a part number

change is made, it will not be noted in the printed Service Guide. For ACER AUTHORIZED SERVICE

PROVIDERS, your Acer office may have a DIFFERENT part number code from those given in the FRU list of

this printed Service Guide. You MUST use the local FRU list provided by your regional Acer office to order

FRU parts for repair and service of customer machines.

NOTE: To scrap or to return the defective parts, you should follow the local government ordinance or regulations on

how to dispose it properly, or follow the rules set by your regional Acer office on how to return it.

Exploded Diagram (Model: X213H)

Q`TY

ITEM

PART NO.

DESCRIPTION

A34G1069 RXA1B0130

BEZEL L215WA-8ACER3-S4 X213H

REAR COVER L215WA-8ACER3-S4 DVI A34G1070 RX 1B0100

KEY BUTTON

LED LENS

Q33G0237 RX 1L0100

A33G0270 1 1L0100

A15G0475501101

MAINFRAME

PW SHIELDING

HINGE COVER L

HINGE COVER R

STAND FRONT

STAND REAR

BASE

A15G0476301101

A33G0271 RX 1L0200

A33G0271 RX 2L0200

A34G0473 RX 1B0100

A34G0474 RX 1B0100

A34G0475 RX 1B0130

HINGE

A37G0050

BASE BKT

A15G0263201

RUBER FOOT-1

RUBER FOOT-2

BASE BUTTON

SCREW

A12G0006

A12G0007

A33G0266 RX 1L0100

0M1G1730 6120

0M1G 130 6120

0Q1G 140 10120

0M1G 140 8125

0Q1G 130 8120

SCREW

Part List

Above picture show the description of the following component.

Picture

Description

Part No.

Main Frame

A15G0475501101

Bezel

A34G1069 RXA1B0130

Panel

750GLU215H1013N000

Power Board

PWPC8C41AQHC

Main Board

CBPCRNDAEQ1

Key Board

KEPC7QK1

Stand Front

A34G0473 RX 1B0100

Base

Stand Rear

Hinge

A34G0475 RX 1B0130

A34G0474 RX 1B0100

A37G0050

Chapter 7

Schematic Diagram

Main Board

FB102

BEAD

VGA_B+

VGA_B-

VGA_G+

VGA_G-

VGA_R+

VGA_R-

R105

100R 1/16W 5%

C102

0.047uF

DSUB_B+

H_Sync

V_Sync

R102

100R 1/10W 5%

R103 1K 1/16W 5%

R104 1K 1/16W 5%

DSUB_H

DSUB_V

R108

C105

5pF/50V

E5VCC

75R 1/16W 5%

R106

R107

C103 C104

22pF

R109

C106

0.047uF

DSUB_B-

2K2 1/16W 5%

22pF

5V_ESD

U104

DSUB_SDA

DSUB_SCL

H_Sy nc

V_Sy nc

R110

R111

470R 1/16W 5%

100R 1/16W 5%

C107

1000pF

DSUB_SOG

DSUB_G+

I/O4 I/O1

VDDGND

I/O3 I/O2

R143

4K7 1/16W 5%

R144

4K7 1/16W 5%

FB103

BEAD

CN101

C108

0.047uF

DSUB_5V

100R 1/16W 5%

R101

C112 AZC099-04S

DSUB_SCL

VGA_PLUG

DSUB_5V

R112

C109

5pF/50V

DDC1_SCL

DDC1_SDA

75R 1/16W 5%

VGA_B-

VGA_B+

VGA_G-

VGA_G+

VGA_R-

VGA_R+

候綼　U103

R114

100R 1/16W 5%

C110

0.047uF

DSUB_G-

DSUB_R+

DSUB_R-

ZD105

ZD104

RLZ5.6B

DSUB_SDA

RLZ5.6B

U103

R113

5V_ESD

VGA_R+

VGA_G+

VGA_B+

100R 1/16W 5%

I/O2 I/O3

GNDVDD

I/O1 I/O4

FB101

BEAD

DB15

R115

C111

0.047uF

C101

AZC099-04S

R116

C113

5pF/50V

R141

1K 1/16W 5%

75R 1/16W 5%

候綼　U101

VGA_DET

R117

100R 1/16W 5% C114

0.047uF

ESD_5V

5V_ESD

5VCC

FB105

R142

1K 1/16W 5%

120 OHM

T P V ( Top Victory Electronics Co . , Ltd. )

OEM MODEL

TPV MODEL

Size

Acer

G3108-1-X-X-17-081119

絬

隔

瓜

絪

腹

Rev

Key Component

Date

2.0.Input

PCB NAME

Sheet

称爹>

称爹

Wednesday, November 19, 2008

CN301

T0M

T0P

T1M

T1P

T2M

T2P

TCLK1M

TCLK1P

T3M

T3P

T4M

T4P

T5M

T5P

T6M

T6P

TCLK2M

TCLK2P

T7M

+5V

T7P

R303

C302

10K 1/16W 5%

R304

0.1uF/16V

PANEL_VCC

Q301

AO3401

47K 1/16W 5%

C303

R307

47K 1/16W 5%

R301

330 OHM 1/4W

C301

CONN

Q302

C304

PPWR_ON#

PANEL_VCC

0.1uF/16V

2N3904S-RTK/PS

R305

0 OHM +-5% 1/8W

R306

10K 1/16W 5%

C306

0.1uF 16V

C305

100uF25V

AO3401L

T P V ( Top Victory Electronics Co . , Ltd. )

OEM MODEL

TPV MODEL

Size

Acer

Acer X203H Analog only

G3108-1-X-X-17-081119

絬隔瓜絪腹

Rev

Key Component

3.0.OUTPUT

PCB NAME

Sheet

<称爹>

称爹

Wednesday, November 19, 2008

Date

5VCC

CN701

+5V

SM340A

D701

5VCC

+5V

R701

BKLT-VBRI

BKLT-EN

R710

R703

R707

PANEL_ID#

Volume#

Mute

CONN

C701

C703

C710

lock type

U702

NC/AIC1117A-18PE

VCC1.8

DVI_5V DSUB_5V

Vin

Vout

D702

C705

C704

C711

NC/0.1uF/16V NC/100uF25V

E5VCC

NC/0.1uF/16V

BAT54C

VCC3.3

FB701

300 OHM

5VCC

VCC3.3

R705

U701

VIN

VCC3.3

10K 1/16W 5%

VOUT

BKLT-VBRI

C707

adj_BACKLIGHT

R702

C706

100uF25V

C708

0.1uF/16V

NC/AP1117E33LA

C709

0.1uF/16V

R706

1K 1/16W 5%

10K 1/16W 5%

100uF25V

BKLT-EN

C702

R704

U703

on_BACKLIGHT

Q701

4K7 1/16W 5%

2N3904S-RTK/PS

AP1117D33LA

T P V ( Top Victory Electronics Co . , Ltd. )

OEM MODEL

TPV MODEL

Size

Rev

Acer

G3108-1-X-X-17-081119

絬

隔

瓜

絪

腹

Key Component

Date

4.0.POWER

PCB NAME

Sheet

称爹>

称爹

Wednesday , Nov ember 19, 2008

FB401

300OHM

FB406

300OHM

FB403

300OHM

AVCC

PVCC

VCC1.8

CVDD

DVDD

C440

1uF 16V

C403

C404

0.1uF/16V

C448

C406

C407

C442

C401

0.22uF16V

R414

10K 1/16W 5%

SPI_CE

U402

WP#

GND

0.1uF/16V

VCC

HOLD#

SCK

VCC3.3

SPI_SO

SPI_CK

SPI_SI

R409

100R 1/16W 5%

FB404

300OHM

DVDD

AVCC

DVDD

C438

4.7uF/16V

CVDD

SST25VF010A-33-4C-SAE SOIC-8 BY SST

PVCC

C413

0.1uF/16V

ADC_VAA

C410

0.1uF/16V

C412

C430

0.1uF/16V

C423

0.1uF/16V

U401

REXT

FB407

300OHM

R401

ADC_VAA

AVCC

DVDD

470 OHM +-1% 1/16W

100

DGND/CGND

RSGB1M/T0M

RSGB1P/T0P

RSCLKBM/T1M

RSCLKBP/T1P

RSBB3M/T2M

RSBB3P/T2P

RX2P

RX2+

RX2-

RX1+

RX1-

RX0+

RX0-

RXC+

RXC-

RX2N

RX1P

RX1N

RX0P

RX0N

RXCP

RXCN

C439

C447

C411

NC/0.22uF16V

R440

NC/4K7 1/16W 5%

R441

NC/4K7 1/16W 5%

1uF 16V

0.1uF/16V

U403

VCC NC

WC NC

SCL NC

SDA VSS

EE_WP

MSCL

MSDA

T0M

T0P

T1M

T1P

T2M

T2P

TCLK1M

TCLK1P

T3M

DSUB_H

DSUB_V

HSYNCI1

VSYNCI1

NC/M24C16

DSUB_B+

DSUB_B-

BIN1+

BIN1-

RSBB2M/TCLK1M

RSBB2P/TCLK1P

RSBB1M/T3M

RSBB1P/T3P

DSUB_SOG

DSUB_G+

DSUB_G-

SOG1I

GIN1+

GIN1-

T3P

+5V

DSUB_R+

DSUB_R-

T4M

T4P

T5M

T5P

T6M

T6P

TCLK2M

TCLK2P

T7M

RIN1+

RIN1-

RSRA3M/T4M/RSRB0M

RSRA3P/T4P/RSRB0P

RSRA2M/T5M/GSGB0M

RSRA2P/T5P/RSGB0P

RSRA1M/T6M/RSGB0M

RSRA1P/T6P/RSBB0P

RSGA3M/TCLK2M

RSGA3P/TCLK2P

RSGA2M/T7M

R465

R466

NC/120R 1/8W

NT68667FG/C

T7P

RSGA2P/T7P

DGND/CGND

RSGA1P/VCKI

LED_A

Q401

+5V

NC/2N3906S-RTK/PS

LED_LF_BLUE

R467

NC/0R05 1/16W

DDC1_SDA

DDC1_SCL

DDC2_SDA

DDC2_SCL

PB7/DDC_SDA1*

PB6/DDC_SCL1*

PB5/DVI_SDA0*

PB4/DVI_SCL0*

RSCLKAM/V7

RSCLKAP/V6

RSBA3M/V5

RSBA3P/V4

RSBA2M/V3

RSBA2P/V2

RSBA1M/V1

RSBA1P/V0

R468 NC/0R05 1/16W

R403

+5V

5V_DET

10K 1/16W 5%

125

PB3/ADC3/INTE1

PB2/ADC2/INTE0

PB1/ADC1

R407

20K OHM 1/16W

KEY1

KEY2

R415

R416

1K 1/16W 5%

5V_DET

1K 1/16W 5% 126

R469

R470

0R05 1/8W

PB0/ADC0

DGND/CGND

GPO2/AD0

GPO3/AD1

INT_VSO/GPO4

INT_HSO/GPO5

110

111

112

113

114

116

117

118

SPI_CE

C446 0.1uF/16V

104

105

106

107

108

SPI_CE

SPI_SO

SPI_SI

SPI_CLK

PD4

PD5

PD6

SPI_SO

SPI_SI

SPI_CK

VSO

HSO

R418

R417

120R 1/16W 5%

100R 1/16W 5%

LED_B

Q402

2N3906S-RTK/PS

LED_GRN/BLUE

R471

R472

75R 1/16W 5%

adj_BACKLIGHT

Volume#

PWMA*/GPO7

PWMB*/GPO8

VGA_DET

DVI_DET

VSO

HSO

1K 1/16W 5%

103

102

124

123

122

PC7

PC6

PC5

POWER_KEY#

R425

R402

on_BACKLIGHT

PANEL_ID#

PC4/PWM1

PC3/PWM0

PC2

PC1*

PC0*

MSDA

MSCL

R431

R429

R412

R454

NC/100R 1/16W 5%49

NC/100R 1/16W 5%50

NC/100R 1/16W 5%31

P35

P34

P31/TXD

P30/RXD

EE_WP

NC/100R 1/16W 5%

121

120

DDC_WP

HDCP_CTRL

DVDD

MUTE

R405

10K 1/16W 5%

RSTB

OSCI

R421

R422

NC/120R 1/8W

PA7/PWM9*

PA6/PWM8*

PA5/PWM7*

PA4/PWM6*

PA3/PWM5

PA1/PWM3

PA2/PWM4

PA0/PWM2

127

C422

0.1uF/16V

C420 22pF

X401

12MHz

R462

1M 1/16W 5%

LED_A

LED_B

LED_ORANGE

R406

R419

NC/120R 1/8W

120R 1/8W 5%

R420

10K 1/8W 5%

128

OSCO

C421 22pF

PPWR_ON#

+5V

CN405

NT68667FG/C

VCC3.3

NC/CONN

DUBUG

R444

R443

3.9K OHM 1% 1/16W

CN402

3.9K OHM 1% 1/16W

LED_LF_BLUE

KEY2

KEY1

POWER_KEY#

LED_GRN/BLUE

LED_ORANGE

CONN

C431

C432

C433

C434

R411

10K 1/16W 5%

ZD402

CN406

NC/CONN

C435

0.1uF/16V

R408

10K 1/16W 5%

C436

ZD403

RLZ5.6B

ZD401

RLZ5.6B

CN401

0.1uF/16V

POWER_KEY#

KEY1

KEY_LEFT

KEY_RIGHT

KEY_AUTO

R436

R437

R438

R439

R445

R446

NC/0R05 1/16W

KEY2

CN403

NC/CONN

LED_ORANGE

LED_GRN/BLUE

NC/0R05 1/16W

LED_LF_BLUE

FFC CONNECTOR

T P

(

Top Victory Electronics Co

Ltd.

)

OEM MODEL

TPV MODEL

Size

Rev

Acer

NC/2x4PIN/1.0mm

絬

隔

瓜

絪

腹

G3108-1-X-X-5-080818

5.0.SCALER

Key Component

Date

PCB NAME

Sheet

称爹>

称爹

Wednesday , Nov ember 19, 2008

Power board

R929 100 OHM 1/4W

BD901

KBP208G

C916

R930 100 OHM 1/4W0.001uF

F801

0R05 1/4W 5% +14.5V

R903 100 OHM 1/4W

R904

ZD901

100OHM 2W

MTZJ T-72 16B

D901

SR5150

C918

1000uF35V

R905

470R 1/10W 5%

D902

SR5150

Q904

KTD1028

R906

100K OMH 2W +-5%

T901

C911

1500PF2KV

POWER X'FMR

R907

1K 1/10W 1%

R931

C923

0.001uF

R908

R909 100 OHM 1/4W

D903

FR107

10K OHM 1/4W +-5%

C909

NC/0.22uF/275V

C917

R910 100 OHM 1/4W 0.001uF

L906

F902

C907

FUSE

+5V

R932

D904

FR103

R912 100 OHM 1/4W

L901

C920

1000uF25V

R911

C925

C922

470UF M 16V

1000uF M 16V

10K OHM 1/4W +-5%

R913

5.1 OHM 1/4W +-5%

D905 NC/31DQ06FC3

D906

N.C.

C913

22uF/50V

R933

30mH

D907

IN4148

D908

NC/IN4148

U901

COMPNC

CS VCC

GNDOUT

MBRF1060CT

R901

620K OHM 1/4W R902

R917

10R 1/4W 5%

R900

Q901

STP9NK65ZFP

C927 R921

0.047uF

R919

150R 1/8W 5%

620K OHM 1/4W

LD7576

R934

C912

0.1uF/25V

R918

10K 1/10W 1%

FB901

BEAD

R920

1K 1/10W 1%

C908

0.47UF

C914

470pF

R923

220 OHM 1/4W

U902

PC123X2YFZOF

NR901

NTCR

R914

43.2K OHM 1% 1/4W

R924

0.39 OHM 2W +-5%

C924

0.1uF/16V

F901

FUSE

R916

3.65K OHM 1% 1/10W

R928

1K 1/10W 1%

C902

C903

1000PF/250VAC

C900

3300pF 250V

1000PF/250VAC

U903

KIA431A-AT/P

C915

R925

2.43K OHM 1% 1/10W

R935

CN902

L907

F903

FUSE

CN901

SOCKET

N.C.

MUTE

VOL

+5V1

HS1

HEAT SINK(Q901)

HS2

+5V

NC/HEAT SINK(D906_5V/4A)

C921

C931

NC/1000uF25V

ON/OFF

DIM

C926

0.1uF/16V

Wire Harness

FB902

HS3

HEAT SINK(D906_5V/2.5A)

GND1

GND

BEAD

Custom

T P V ( Top Victory Electronics Co .

Ltd.

)

OEM MODEL

TPV MODEL

Size

PWPC8C41AQHC

715G2892-1A

G2892-1A-X-X-9-081111

絬

隔

瓜

絪

腹

Rev

Key Component

Date

01.POWER

PCB NAME

Sheet

ODM MODEL

称爹

Tuesday , November 18, 2008

CN804

CONN

F801

+14.5V

0 OHM 1/4W

R801

C802

470UF/25V

R813

1K 1/10W 1%

2.43K OHM 1% 1/10W

C801

NC/5pF/3KV

Q803

OLP4

P8008HV

CN803

Q802

PDTA144WK

Q801

MMBT3904

PT801

POWER X'FMR

Q804

PDTC144WK

ON/OFF

+14.5V

D801

R803

10R 1/10W 5%

BAV70

C803

R808

1K 1/10W 1%

CONN

MMBT2907AK

Q805

C813

1N 100V NPO +/-5%

OLP3

CN801

+14.5V

R806

10K 1/10W 1%

R836

33 OHM 1/4W

R837

33 OHM 1/4W

R807

10K 1/10W 1%

R809

2.43K OHM 1% 1/10W

R802

1K 1/10W 1%

CONN

DIM

Q812

P8008HV

C804

NC/5pF/3KV

OLP1

Q806

RK7002

Q813

MMBT3904

CN802

R810

1K 1/10W 1%

R811

10R 1/10W 5%

MMBT2907AK

Q807

R812

D804

2.43K OHM 1% 1/10W

IN4148

R804

1K 1/10W 1%

CONN

OLP2

R814

68K 1/10W 5%

Q808

MMBT3904

R815

68K 1/10W 5%

R838

33R 1/10W 5%

D802

BAV70

R839

33R 1/10W 5%

R840

10K 1/10W 1%

R816

30K OHM 1/4W

R819

470K 1/10W 5%R817

2.43K OHM 1% 1/10W

C806

R818

10K 1/10W 1%

D805

BAW56

U801

TL494IDR

1IN+

1IN-

FEEDBACK

DTC OUTPUT CTRL

GND

2IN+

2IN-

REF

VCC

C808

0.022uF

R823

10K 1/10W 1%

OLP1

OLP4

R822

27K 1/10W 1%

R825

10K 1/10W 1%

R824

68K 1/10W 5%

Q809

D803

MMBT3904

BAV70

C815

Q810

R820

16.2K 1/10W 1%C807

R828

18K 1/8W 1%

MMBT3904

0R05 1/10W

R843

R821

R826

47K 1/10W 1%

R827

2.43K OHM 1% 1/10W

C809

680pF

R841

1.5K 1/10W 1%

R842

1.5K 1/10W 1%

R831

10K 1/10W 1%

C811

0.1uF/25V

Q811

RK7002

R832

10K 1/10W 1%

C810

2.2uF/10V

OLP2

OLP3

C817

2.2uF/10V

R833

C812

R835

10K 1/10W 1%

R834

47K 1/10W 5%

C816

Custom

T P V ( Top Victory Electronics Co .

Ltd.

)

OEM MODEL

Size

Rev

PWPC8C41AQHC

715G2892-1A

G2892-1A-X-X-9-081111

TPV MODEL

絬

隔

瓜

絪

腹

Key Component

Date

02.INVERTER

PCB NAME

Sheet

ODM MODEL

称爹

Monday , Nov ember 10, 2008

+5V1

R602

C604

470UF M 16V

10 KOHM +-5% 1/10W

VOL

R603

4.7K 1/10W 5%

C609

1uF/25V

10K 1/10W 5%

R609

APA2071JI-TUG 3.1W

CN602

LOUT-

LOUT+

SE/BTL

LOUTP

CN601

VOLUME

LINN

VDD

LOUTN

GND

Lin

R604

R605

10K 1/10W 5%

C601 0.47uF/16V

GND

RINN

GND

Rin

ROUT+

ROUT-

C606 0.47uF/16V

ROUTN

VDD

BYPASS

SHUTDOWN ROUTP

PHONEJACK

CONN

U601

C612

0.1uF/16V

C608

1uF/25V

R608

0R05 1/8W

R607

15K 1/10W 5% 15K 1/10W 5%

R606

+5V1

R601

10K 1/10W 5%

R612

10K 1/10W 5%

CN603

R610

HS4

+5V1

HEAT SINK(U601)

FB602

0 OHM +-5% 1/10W

C613

0.1uF/16V

NC/CONN

BEAD

Q608

MUTE

T P V ( Top Victory Electronics Co . , Ltd. )

OEM MODEL

TPV MODEL

Size

Rev

G2892-1A-X-X-9-081111

絬隔瓜絪腹

PWPC8C41AQHC

715G2892-1A

Key Component

04.AUDIO

PCB NAME

Sheet

ODM MODEL

称爹

Monday, November 10, 2008

Date

Key board

LED001

LED

2007/5/18

2007/5/11

GND

CN001

2007/5/18

LBADC1

LBADC2

DC_POWERON

LED_GRN#

LED_RED#

R002

2K OHM 1% 1/10W

LED_GRN#

LED_RED#

R004

R005

2K OHM 1% 1/10W

1K 1/10W 1%

C001

C002 C003

NC NC

C004

C005

CONN

2007/5/18

GND

SW006

SW003

SW004

SW001

SW002

SW005

MENU(2K)

1.1V

GND

LBADC1

LBADC2

VOL- (GND)

VOL+(2K)

AUTO(1K)

0 V

1.1V

0.65V

change Net name

MENU--->AUTO

AUTO----MENU

ECOLOR(GND) 0 V

GND1

GND2

GND-EMI

CN001

GND

CONNECTOR ECOLOR AUTO MENU

VOL-

VOL+

POWER

LED

T P V ( Top Victory Electronics Co . , Ltd. )

OEM MODEL

Size

X173/X173W/X193W/P193W/X223W

ACER

G2731-B-AC-X-1-070617

TPV MODEL

絬

隔

瓜

絪

腹

Rev

Key Component

Date

02.Key Board

PCB NAME

Sheet

715G2731-B-AC

<称爹>

称爹

Sunday, June 17, 2007

Ericsson BS120 User Manual
Eizo Nanao Computer Monitor CG222W User Manual
Eizo GX320 CL User Manual
Dell Flat Panel Monitor 320 2807 User Manual
DCS CMO24SS User Manual
Cypress CY7C1320CV18 167BZC User Manual
Cypress CY7C027AV User Manual
Crown COMTECH DRIVECORE CT 4150 User Manual
Cres Cor CO151F1818B User Manual
Asus 850 ATX P4T User Manual