5800_CIB_1ATT 8/6/02 10:43 AM Page II
USER’S MANUAL
Part 2
Expansion Handset 5800
Please also read
Part 1 — Important
Product Information
© 2002 Advanced AmericanTelephones. All Rights Reserved.
AT&T and the Globe Symbol are trademarks of AT&T Corp., licensed to Advanced AmericanTelephones.
5800_CIB_1ATT 8/6/02 10:43 AM Page V
CONTENTS
BEFORE YOU BEGIN ......................................................................1
About Handset Registration....................................................................................1
About Softkeys.........................................................................................................1
CHARGE THE BATTERY...................................................................2
REGISTER THE HANDSET................................................................3
To Model 5830 Base Unit .......................................................................................3
To Model 5840 Base Unit .......................................................................................3
INSTALLATION .............................................................................4
Belt Clip ...................................................................................................................4
Headset ....................................................................................................................4
Battery Life...............................................................................................................5
Charge the Handset Battery Pack...........................................................................5
5800_CIB_1ATT 8/6/02 10:43 AM Page 1
BEFORE YOU BEGIN
About Handset Registration
•
You must register this (and any other) handset with
the base, following the directions in“REGISTER
THE HANDSET.” This handset is compatible with
telephone models 5840 and 5830.
•
•
•
The original handset that came with the base is
automatically registered as Handset 1.
Additional handsets will be assigned Handset 2,
Handset 3, Handset 4, Handset 5, and Handset 6.
Whenever you install a handset battery pack, the
handset will display SEARCHING FOR BASE (if
it’s registered) or ENTER BASE ID (if it’s not
registered).
About Softkeys
•
The handset softkeys are located below the screen
display.
•
Press the softkey below the operation displayed on
the screen to select that operation. (For example,
to enter the menu, press the center softkey).
•
Press O/C at any time to return to the
previous screen.
Press and hold O/C to return to the idle
screen.
kk o •
i
pp
1
5800_CIB_1ATT 8/6/02 10:43 AM Page 2
CHARGE THE BATTERY
1
Install the handset battery pack.
Use only the battery supplied with this handset or AT&T Accessory
Battery Model 2401, SKU#91077.
•
When you install the battery pack the first time, the handset
will display ENTER BASE ID.
2
a) Remove battery
b) Align the contacts and
place the battery pack in
the battery compartment.
compartment cover by
pressing on indentation
and sliding downward.
c) Replace cover by
sliding it on its
track up over
battery case until
it snaps firmly
into place.
Charge the handset battery.
•
Place the handset in the
remote charging stand.
The CHARGING light
goes on.
•
Charge the battery at least
12 hours. After the first
charge, the battery typically
charges in only eight
hours.
2
5800_CIB_1ATT 8/6/02 10:43 AM Page 3
REGISTER THE HANDSET
To Model 5830 Base Unit
1
2
3
Make sure to charge the handset battery pack at least 12 hours.
At the cordless handset, use the softkey to select NEW.
Enter the 15-digit Base Unit ID Code located on the underside of
your Model 5830 base.
4
5
Use the softkey to select OK. The screen displays PLEASE WAIT!!.
After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
To Model 5840 Base Unit
1
2
3
4
Make sure to charge the handset battery pack at least 12 hours.
MENU
At the 5840 corded base, press
.
Use
or
to select DISPLAY BASE-ID.
OK
Press
. The base screen will display the 15-digit Base ID
code for about 30 seconds, then return to the idle screen. Write
down the Base ID code so you can enter it at the handset in
STEP 6 below.
5
6
7
At the cordless handset, use the softkey to select NEW.
Enter the 15-digit Base ID code.
OK
Use the softkey to select
. The screen displays PLEASE
WAIT!!.
8
After about 45 seconds, the screen displays FOUND BASE. If the
handset displays BASE BUSY TRY LATER, the base is in use.
For complete operational instructions,
please refer to the manual that came
with your 5840 or 5830 telephone.
3
5800_CIB_1ATT 8/6/02 10:43 AM Page 4
INSTALLATION
Belt Clip
Attach the belt clip (optional).
a) Slide
down
into
c) To remove,
lift one
b) Press tabs
on belt clip
into slots
side
grooves
to attach.
with your
thumbnail
and push
back.
on back of
handset to
reattach.
Headset
You can use this telephone
hands-free when you install
any industry standard
2.5 mm headset (purchased
separately). For best results
use an AT&T 2.5 mm
headset.
Plug the headset into the
jack located on the left side
of the handset (under the
small rubber flap). Do not
force the connection, but
make sure the plug fits
securely.
4
5800_CIB_1ATT 8/6/02 10:43 AM Page 5
Battery Life
A fully charged battery provides an average talk time of about eight
hours, or standby time of five days.
NOTE: Talk time and standby time may vary depending on
operating conditions.
¥
Charge the Handset Battery Pack
•
After a low battery indicator, the
handset battery needs to be
charged.
•
Place the handset in the base so
the CHARGING light goes on.
The battery pack is typically
charged in nine hours.
•
If you repeatedly get a low
battery indicator, even after nine
hours of charging, the battery
should be replaced. Use only
AT&T Battery 2401,
SKU# 91077.
CAUTION: Charge the
battery provided with
or identified for use
with this product only
in accordance with the
instructions and limitations
specified in the User’s
Manual, Part 1.
5
Need Help Insert 8/6/02 8:25 AM Page 1
Congratulations on your purchase
of this AT&T product.
NEED HELP?
Our representatives are here
to help you with any questions
concerning the operation of this
product, available accessories,
or any other related issues.
Call Toll Free
1 (800) 360-4121
or visit our website at
|