Verizon SAMSUNG SCHI600 User Manual

q u i c k  
reference  
g u i d e  
SCHi600  
6801-001224  
W E L C O M E T O V E R I Z O N W I R E L E S S  
S M A R T P H O N E  
B A S I C S  
GETTING STARTED  
*Functions for the left and  
right soft keys are defined by  
what appears above each (soft  
key) in the display.  
Earpiece  
Icons  
Installing the Battery  
1.) Line up the battery with the corresponding grooves on the Smartphone.  
2.) Gently slide the battery toward the top of the Smartphone until it snaps into place.  
Display  
Charging the battery  
1.) Plug the AC module for the power accessory into a 120 or 220 VAC wall outlet.  
2.) Remove the rubber plug from the power accessory port in the bottom end of your  
Smartphone, if necessary.  
*Left Soft Key Function  
Navigation Key  
*Right Soft Key Function  
OK Key  
3.) Plug the power accessory connector into the bottom end of your Smartphone,  
button side facing up.  
*Left Soft Key  
*Right Soft Key  
Powering the Smartphone on and off  
Headset Connector  
Quick List Key  
Browser/Voice Signal Key  
Backspace/Clear Key  
END/Power Key  
END  
1.) Press and hold  
.
Volume Keys  
PLACING AND RECEIVING CALLS  
Home Key  
SEND Key  
Placing Calls  
1.) Enter the number that you wish to call using the keypad.  
Voice Memo Key  
Alpha-Numeric Keypad  
Microphone  
SEND  
2.) Press  
.
Receiving Calls  
1.) When you receive an incoming call, the Incoming screen appears in  
Power/Interface Connector  
the display.  
2.) Press the left soft key Accept to answer the call or press the right soft key Reject  
Samsung SCH-i600  
to send the call to voice mail.  
Page 3  
Page 4  
S M A R T P H O N E  
B A S I C S  
6.) Use the navigation key to move the cursor to the message composition field.  
7.) Enter the content of your message using the keypad.  
SETTING UP VOICEMAIL  
First Time User  
*
1
8
TUV  
6MNO  
and press  
SEND  
. The  
1.) Press and hold  
or dial  
,
,
8.) Press the left soft key Send. Your message is sent.  
Smartphone calls voicemail.  
Entering letters and numbers  
You can enter letters and numbers into messages depending on the current mode of  
TXT entry.  
2.) Follow the voice mail tutorial to set up your account.  
Existing user  
*
1
8
TUV  
6MNO  
to dial your  
1.) To change between TXT entry modes: At any TXT entry screen, press and hold  
1.) Press and hold  
voice mailbox.  
or dial  
,
,
until the desired mode of TXT entry appears in the upper right corner of  
the display.  
⇑  
2.) Enter your password when prompted, then press  
.
#  
In 123 mode, press the corresponding number on the keypad to enter the  
3.) Follow the recorded prompts to listen to messages, change administrative  
desired number.  
options, and so on.  
In ABC mode, press the keys containing the letters that you wish to enter into your  
USING TXT MESSAGING  
message. Press a key repeatedly to cycle between letters. Pause briefly to allow the  
displayed letter to be inserted into your message.  
Sending a new TXT message  
1.) At the Home Screen, press the left soft key Programs. Inbox/SMS is highlighted.  
Entering symbols  
OK  
1.) To change to symbol mode from any txt entry mode: At any TXTentry screen,  
2.) Press  
, then press the left soft key New. The New Message screen appears  
press and hold  
. The Symbols screen appears in the display.  
# —  
in the display.  
2.) Use the navigation key to highlight the symbol that you wish to enter into  
3.) Enter the phone number of the recipient (or the e-mail address) in the To: field.  
4.) Use the navigation key to move the cursor to the Cc: and Subj: fields.  
5.) Enter information in the Cc: and Subj: fields using the keypad.  
Note: To switch TXT entry modes (between ABC, 123, and T9), press and hold  
your message.  
3.) Once the desired symbol is highlighted, press the left soft key Done to enter the  
symbol into your message.  
until the desired text entry mode appears in the upper right corner  
of the display.  
⇑  
Page 5  
Page 6  
S M A R T P H O N E  
B A S I C S  
Predictive Text Input  
SEND  
3.) Press  
. The contact’s number and Calling... appear in the display.  
T9 requires only one key press per letter, and recognizes the most commonly used  
word of a numeric sequence.  
Programming speed dial numbers  
Entries in your Contacts list can be assigned to a speed dial location on your keypad.  
Contacts can be assigned to available speed dial locations from 2-99. Locations 0 and  
1 are reserved.  
1.) While composing a message, press and hold  
right corner of the display.  
until T9 appears in the upper  
⇑  
2.) Press the corresponding key on the keypad only once for each letter of the word  
that you’re spelling. For example; to spell Verizon, press the following keys  
only once.  
1.) At the Home Screen, press the right soft key Contacts. Your list of contacts  
appears in the display.  
2.) Use the navigation key to highlight the contact that you wish to add to speed dial,  
OK  
then press  
.
8TUV 3DEF 7PQRS 4GHI 9WXYZ 6MNO 6MNO  
3.) Use the navigation key to highlight the number you’d like to add to speed dial (if  
more than one number exists).  
V
E
R
I
Z
O
N
4.) Press the right soft key Menu. A pop-up menu appears in the display with Add  
USING CONTACTS  
Speed Dial highlighted.  
Adding entries to Contacts  
OK  
5.) Press  
. The Add Shortcut screen appears in the display.  
1.) At the Home Screen, press the right soft key Contacts.  
6.) Use the navigation key to highlight the Keypad assignment field.  
7.) Use the navigation key to select an available keypad assignment.  
8.) Press the left soft key Done when finished.  
2.) Press the left soft key New. The Contact entry screen appears in the display.  
3.) Enter information using the keypad. Use the navigation key to move to another  
entry field. Press the left soft key Done when finished.  
Calling an entry in Contacts  
Placing a call using speed dial numbers  
1.) At the Home Screen, press the right soft key Contacts.  
1.) At the Home Screen, press and hold the key assigned to the speed dial number  
that you wish to call.  
2.) Use the navigation key to highlight the contact that you wish to call.  
2.) Calling... appears in the display along with the phone number. After you are con-  
nected, the name of the contact assigned to the speed dial location appears in  
the display.  
3.) Press the right navigation key to switch between the different numbers available  
for a contact.  
Page 7  
Page 8  
P I M  
F U N C T I O N S  
Deleting appointments  
USING CALENDAR  
1.) Highlight an appointment in the calendar as outlined in the previous section  
Adding appointments  
Viewing appointments.”  
1.) At the Home Screen, press the left soft key Programs.  
2.) Once the appointment is highlighted, press the right soft key Menu. A pop-up  
OK  
2.) Use the navigation key to highlight Calendar, then press  
.
menu appears in the display with New highlighted.  
3.) Press the right soft key Menu. A pop-up menu appears in the display with  
OK  
3.) Use the navigation key to highlight Delete, then press  
. A confirmation mes-  
New highlighted.  
sage appears in the display asking if you want to permanently delete  
the appointment.  
OK  
4.) Press  
. The New Appointment screen appears in the display.  
5.) Enter information using the keypad. Use the navigation key to move the cursor to  
the next field.  
4.) Press the left soft key Yes to delete the appointment, or press No to cancel and  
return to the appointments list.  
6.) Press the left soft key Done when finished.  
Editing appointments  
Viewing appointments  
1.) Open an appointment as outlined in “Viewing appointments.”  
1.) At the Home Screen, press the left soft key Programs.  
2.) Press the left soft key Edit. The details of the appointment appear in the display.  
2.) Use the navigation key to highlight Calendar.  
3.) Use the keypad to enter or change text. Use the navigation key to move the cursor  
to another field.  
OK  
3.) Press  
the display.  
4.) Use the navigation key to highlight an appointment.  
OK  
. Any appointments that you’ve entered into the Calendar appear in  
4.) Press the left soft key Done when finished, or press Cancel to return to the  
appointments list.  
5.) Press  
to view details about the highlighted appointment.  
Page 9  
Page 10  
®
A C T I V E S Y N C  
Placing the Smartphone into the Sync cradle  
LOADING AND USING SYNC SOFTWARE  
Microsoft® ActiveSync® is the latest synchronization software for Microsoft  
Windows® Powered Pocket PC devices and Smartphones. ActiveSync® allows you  
to synchronize data between your Smartphone and PC.  
1.) Connect the sync cradle to your PC’s USB port with the provided cable.  
2.) Place the Smartphone in the cradle face up. Make sure the power accessory/data  
port connector of the Smartphone is mated to its counterpart in the sync cradle.  
Install ActiveSync  
3.) Press the back of the Smartphone between the two retainers on either side of the  
cradle until the it snaps into place.  
Important! Do not attach the USB cable between the Smartphone cradle and PC until  
after you install ActiveSync.  
Starting the Sync process  
1.) Place the Software Companion CD in the CD-ROM drive on your computer. After a  
1.) If the Smartphone is on and in the sync cradle as described in the previous sec-  
tion, synchronization between it and the PC begins automatically.  
short time Getting started with your Smartphone appears in the display.  
2.) Click Start Here, then click Install ActiveSync.  
WIRELESS SYNC  
3.) Click Install. A message box appears in the display informing you that you are  
With Wireless Sync from Verizon Wireless, you can keep in contact and stay up-to-  
date with important e-mails and appointments when you're on the go. Wireless Sync  
works with ActiveSync allowing you to sync wirelessly with your desktop from virtu-  
ally anywhere, making your Samsung i600 an even-more-powerful business tool.  
Explore the enclosed Wireless Sync Start Up CD for more information or to begin  
using the service.  
about to install a product from the Smartphone companion CD.  
4.) Click OK. The file download box appears in the display.  
5.) Click Open. The ActiveSync setup dialogue box appears in the display.  
6.) Click Next. You’re prompted to select the installation folder for ActiveSync.  
7.) Click Next to install ActiveSync to the default folder, or click Change to select a  
different destination for the program.  
(Requires subscription to 1- or 2-year Wireless Sync Express Networksm calling plan. In order to  
use Wireless Sync, your PC must remain on and in a condition to receive e-mail.)  
8.) If you selected Change, follow the prompts to direct installation of ActiveSync to  
the folder of your choice, otherwise proceed to step 9.  
9.) Click Next. ActiveSync program files are copied to your hard drive into the  
default folder.  
Page 11  
Page 12  
E - M A I L  
5.) Use the navigation key to highlight the Cc: and Subj: fields, entering information  
SETTING UP E-MAIL  
Note: There are three ways to configure your Smartphone for e-mail access.  
However, only one configuration method may be used at a time.  
Microsoft Exchange  
via the keypad if desired.  
6.) Use the navigation key to highlight the message body field.  
7.) Enter the content of your e-mail using the keypad, then press the left soft key  
Send.  
If your company uses Microsoft Exchange, contact your company’s network adminis-  
trator to set up your Smartphone to send and receive e-mail through the  
Exchange server.  
8.) Press the right soft key Menu.  
OK  
9.) Use the navigation key to highlight Send/Receive E-mail, then press  
. Your  
Wireless Sync  
connected to your service provider and your e-mail is sent.  
You may use the Wireless Sync product from Verizon Wireless to synchronize your  
Outlook e-mail, calendar, contacts, and tasks from your PC to your Smartphone. To  
learn more about this feature, insert the Wireless Sync CD provided with this product.  
Deleting e-mails from your e-mail account  
Note: Messages can only be deleted one at a time.  
1.) At the Home Screen, press the left soft key Programs. Inbox/SMS is highlighted.  
OK  
POP 3  
If you have a POP3 e-mail account, you can either manually set up your Smartphone  
to send and receive e-mail or you can use the Wireless E-mail Setup Wizard located  
on the SD Card provided with this product to automatically configure your account.  
2.) Press  
.
3.) Any e-mail or SMS messages in your Inbox appear in the display.  
4.) Use the navigation key to highlight the message that you wish to delete.  
5.) Press the right soft key Menu.  
Sending e-mails from your e-mail account  
1.) At the Home Screen, press the left soft key Programs. Inbox/SMS is highlighted.  
OK  
6.) Use the navigation key to highlight Delete, then press  
. The selected e-mail  
OK  
2.) Press  
.
is deleted.  
3.) Press the left soft key New.  
4.) Enter the e-mail address of the recipient in the To: field.  
Page 13  
Page 14  
V O I C E  
S I G N A L  
5.) If Voice Signal is unsure of the number that you said, a list of possible matches  
appears in the display. You’re asked to confirm each number as Voice Signal  
scrolls through the list.  
VOICE SIGNAL  
Voice Signal is advanced speech recognition software that can be used to activate a  
wide-variety of functions on your Smartphone. Voice Signal software automatically  
voice activates all contacts in your Phone Book for voice dialing and Phone Book  
searching, no pre-recording or training needed. Speak phone numbers naturally to  
dial, and use voice commands to launch applications and navigate phone menus.  
6.) Say Yes or No to confirm or reject the numbers when prompted.  
Use Name Dial  
To use Name Dial, you’ll need to have some entries in your Contacts list. See  
“Contacts” on page 38 of the User Guide for information on creating a Contacts list.  
Voice Signal Features  
The following is a list of functions that you can perform using Voice Signal.  
1.) Press and hold the Browser/Voice Signal Key for two seconds. The Smartphone  
prompts “Please say a command,” and a list of commands appears in the display.  
Digit Dial: Dial by saying the phone number  
Name Dial: Dial by saying any name in your Contacts list  
Quick Dial: Dial by saying custom voice tags for any name in your Contacts list  
Name Lookup: Open the contact record for any name in your Contacts list  
Open App: Open any application installed on your device  
2.) Say Name Dial (at a distance of 3-12 inches). The Smartphone prompts “Please  
say the name.”  
3.) Say the name exactly as it is displayed in your contacts list, first name followed by  
last name. The contact name appears in the display. If your contact has more than  
one number, such as a mobile number and a home number, you’re prompted for  
which location.  
Use Digit Dial  
1.) Press and hold the Browser/Voice Signal Key for two seconds. The Smartphone  
prompts “Please say a command,” and a list of commands appears in the display.  
4.) Say the location. The location is repeated through the speakerphone and the num-  
ber is dialed.  
2.) Say Digit Dial (at a distance of 3-12 inches). The Smartphone prompts “Please  
say the number.”  
3.) Say the area code and number that you wish to dial. Say the number naturally.  
4.) The number is repeated through the speakerphone and then dialed.  
Page 15  
Page 16  
V O I C E  
S I G N A L  
Train Quick Dial  
Use Name Lookup  
1.) At the Home Screen, open the Voice Signal Setup menu and then select Record  
Names. Your list of contacts appears in the display and you have the choice to  
Train or Play the name of the contact.  
1.) Press and hold the Browser/Voice Signal Key for two seconds. The Smartphone  
prompts “Please say a command,” and a list of commands appears in the display.  
2.) Say “Name Lookup” at a distance of 3-12 inches from the microphone. “Please  
say the name” plays through the speakerphone.  
2.) Press Train. You’re prompted to say the name.  
3.) Say the name at a distance of 3-12 inches from the microphone.  
4.) “Did the recording sound okay?” appears in the display.  
3.) Say the name exactly as it is displayed in your Contacts list, first name followed  
by last name.  
4.) The contact name appears in the display with other information that you’ve  
entered for that contact.  
5.) Press Yes to proceed or No if the recording was unacceptable. You’re returned to  
the Contacts list. A red checkmark appears next to the “trained” contact.  
Use Open App  
Use Quick Dial  
The example that follows instructs you how to open Internet Explorer. However, you  
can open any application on your smartphone using Voice Signal.  
1.) Press and hold the Browser/Voice Signal Key for two seconds. The Smartphone  
prompts “Please say a command,” and a list of commands appears in the display.  
1.) Press and hold the Browser/Voice Signal Key for two seconds. The Smartphone  
prompts “Please say a command,” and a list of commands appears in the display.  
2.) Say “Quick Dial” at a distance of 3-12 inches from the microphone.  
3.) “Who would you like to call” appears in the display and the audio prompt is  
played through the speakerphone.  
2.) Say “Open Internet Explorer” at a distance of 3-12 inches from the microphone.  
3.) Internet Explorer opens and is directed to the last web page visited.  
4.) Say the contact name exactly as it is has been “trained.” If you haven’t trained any  
of your contacts for Quick Dial, you’re prompted to do so.  
Voice Signal Settings  
You can adjust the settings and preferences for Voice Signal by opening Voice Signal  
Setup from the Home Screen. In the Voice Signal Setup menu you can train, edit, and  
delete Quick Dial entries, adapt the Digit Dial feature, turn the “Did you say?” choice  
lists on and off, adjust speed and accuracy, and select applications for launching  
by voice.  
5.) The Smartphone displays the contact, you hear your recorded Quick Dial entry  
through the speakerphone, and the number is dialed.  
Page 17  
Page 18  
E N H A N C E D  
S E R V I C E S  
A C C E S S O R I E S  
Now it’s easier than ever to keep in touch while you’re on the go. Send a text message.  
Meet new people. Get a stock alert. Now it’s all possible with your Verizon Wireless  
phone service.  
Voice Gear  
With Voice Dialing, you can make calls with just the sound of your voice.  
Press #84 SEND.  
Say “Call Someone.”  
TXT Messaging  
Say the person’s name or number.  
TXT Messaging is a fun and easy way to keep in touch. You can send and receive text  
messages right over your Smartphone. And thanks to Enhanced TXT, your messages can  
now be up to 160 characters. Best of all, you choose the font size and style.  
Note: If you go over 160 characters, you will be charged for an additional message.  
Service not available in all areas. Usage charged at subscription rates or per call, plus airtime fees.  
When it comes to keeping in touch, your new Smartphone with Verizon Wireless service is  
all you’ll ever need. Nonetheless, here are some great ways to accessorize your Smartphone.  
HANDS-FREE VEHICLE KITS AND HEADSETS  
Headsets plug directly into your Smartphone and include a microphone and earpiece.  
Messages/alerts charged at Calling Plan rates. Not available in all areas.  
TXT Communities  
VEHICLE POWER CHARGERS AND HOME/OFFICE CHARGERS  
Use your car’s battery to power your Smartphone. Some home/office chargers can charge  
two batteries at the same time and offer hands-free ability.  
TXT Communities are a GR8 way to meet people just like you. Go to vtext.com to sign up.  
Start your own group or join an existing one. Feel free to invite anyone to join you.  
Sign up for specific channels. Love music? Get the latest news on your favorite artists.  
ADDITIONAL BATTERIES  
For those instances when your first battery runs out and you need additional usage time.  
Receive TXT messages about movie updates and participate in polls and quizzes.  
THREE WAYS TO ACCESSORIZE  
TXT Alerts  
Visit our Communications Stores.  
With TXT Alerts, you’ll always know what you need to know. Get the final score as soon  
as the game is over. Get the weather before it starts raining. Go to vtext.com to sign up.  
Go to verizonwireless.com, click on Accessories.  
Try our Accessories Hotline at 1.866.VZ GOT IT.  
Page 19  
Page 20  
M A Y  
W E  
H E L P  
Y O U ?  
MANAGE YOUR ACCOUNT ONLINE  
The key word here is “ease.” When you manage your account online, everything you  
need to do can be done with ease. No more phone calls. No more checks to write. No  
more waiting for statements.  
Check balances. Make payments. Add or remove features. Whatever you want to do, 24  
hours, 7 days — with ease. So register today at verizonwireless.com. It’s fast and free.  
Not available in all areas.  
Verizonwireless.com is open 24 hours a day for customer service, general information,  
even shopping. But just in case, be sure to keep these numbers handy.  
Customer Service (6am11pm): *611 SEND  
24-Hour Technical Support (24 hrs.): *611 SEND  
411 ConnectSM Directory Assistance: 411 SEND (charges apply)  
Emergency Assistance: 911 SEND  
Page 21  

Transcend Information TS32 User Manual
Sony Ericsson UMTS GSM 1900 User Manual
Seagate MEDALIST ST38421A User Manual
Seagate Barracuda ST380211AS User Manual
SanDisk pcSIM User Manual
RCA RP 3761 User Manual
Philips SOUNDMACHINE AZ102S User Manual
Philips Emotive Micro MZ1000 User Manual
Philips CD SOUNDMACHINE AZ1021 User Manual
Pantech G670 User Manual