Philips CD SOUNDMACHINE AZ1021 User Manual

AZ1021  
CD Soundmachine  
AZ1021C  
AZ1021N  
Register your product and get support at  
User Manual  
6 x R14 • UM-2 • C-CELLS  
%
8
3
4
X
PROG  
5
6
7
REP  
SHUF  
English  
Controls/Power Supply  
Battery door – open to insert 6 x 1.5V  
Supplied Accessories  
– Australian power cord  
VDE power cord  
R-14/ UM-2/ C-cells  
CAUTION  
-Visible and invisible laser radiation.  
If the cover is open, do not look at  
the beam.  
- High voltage! Do not open.You run  
the risk of getting an electric shock.  
The machine does not contain any  
user-serviceable parts.  
Top/front panels (See 1)  
1
2
VOLUME  
adjusts volume level.  
Source selector: CD,TUNER, OFF  
selects CD or radio source of sound  
power off switch  
- Modification of the product could  
result in hazardous radiation of  
EMC or other unsafe operation.  
3 Display  
shows the CD functions  
4
2 ; starts or pauses CD playback  
§
selects the next/previous track  
Power Supply  
– searches forward/backward (press and hold  
the button) within the current track  
Whenever conßvenient, use the power supply  
cord if you want to conserve battery life.  
Make sure you remove the plug from the set  
and wall outlet before inserting batteries.  
REPEAT  
repeats a track/  
CD program/entire CD.  
5 PROG – programs tracks and reviews the  
Batteries (not included)  
program  
1
2
Open the battery door and insert 6 batteries,  
type R-14, UM-2 or C-cells, (preferably  
alkaline) with the correct polarity as indicated  
by the "+" and "" symbols inside the com-  
partment. (See 2)  
6 LIFTTO OPEN – opens/closes the CD  
door.  
7 TUNING – tunes to radio stations  
8 SHUFFLE plays all tracks in random order  
9
0
BAND  
STOP stops CD playback;  
erases a CD program  
selects waveband  
Replace the battery door, making sure the bat-  
teries are firmly and correctly in place.The set is  
now ready to operate.  
9
Batteries contain chemical substances, so  
they should be disposed of properly.  
Back/bottom panel (See 2  
and 3)  
Incorrect use of batteries can cause electrolyte  
leakage and corrode the compartment or cause  
the batteries to burst:  
! Telescopic antenna - improves FM  
reception.  
Do not mix battery types: e.g. alkaline with car-  
bon zinc. Only use batteries of the same type  
for the set.  
@ AC MAINS~ - inlet for power cord.  
#
$
DBB  
turns the bass enhancement on/off.  
;3.5 mm stereo headphone socket  
When inserting new batteries, do not try to mix  
old batteries with the new ones.  
Helpful hints:  
The speaker is muted when you connect head-  
phones to the set.  
Remove the batteries if the set is not to be used  
for a long time.  
Power Supply  
General Operation /Tuner  
Using AC power  
General operation  
WARNING:Always ensure that you have  
completely switched off the set, before  
you change or disconnect power supply.  
Switching on and off and selecting the  
function  
1
2
Check if the power voltage, as shown on the  
type plate located on the bottom of the set,  
corresponds to your local power supply. If it  
does not, consult your dealer or service cen-  
ter.  
1
2
To select your sound source, adjust the  
Source selector to: CD, or TUNER  
.
To switch off the set, adjust the Source  
selector to OFF position.  
Connect the power cord to the AC  
MAINS~ inlet and the wall socket.The set is  
now connected and ready for use.  
Adjusting volume and sound  
1
2
Adjust volume by using the VOLUME con-  
trol.  
3
4
To switch the set off completely, withdraw the  
power cord from the wall socket.  
Adjust sound effect by using the DBB con-  
trol.  
Install the unit near the AC outlet and where  
the AC power plug can be easily reached.  
Disconnect the power cord from the wall  
socket to protect your set during heavy thun-  
derstorms. Children could seriously injure  
themselves as the free end of the cable may  
still be live if only the connector is removed  
from the MAINS socket at the back of the  
unit.  
Radio reception  
1
2
Adjust the Source selector to TUNER.  
Adjust BAND to select your desired wave-  
band, MW or FM.  
3
Turn TUNING to tune to a station.  
The type plate is located on the  
bottom of the set.  
Helpful hints:  
To improve radio reception  
Helpful hints:  
To avoid unnecessary energy consumption,  
always adjust the Source selector to OFF  
after using the set.  
For FM, extend, incline and turn the telescop-  
ic antenna for best reception and reduce its  
length if the signal is too strong.  
For MW, the set uses a built-in antenna.  
Direct this antenna for best reception by  
turning the whole set.  
CD Player  
Playing a CD  
Selecting a different track  
This CD player plays Audio Discs including  
CD-Recordables (CD-R) and CD-Rewritables  
(CD-RW).  
Press / § once or repeatedly until the  
desired track number appears in the display.  
In the pause/stop position, press 2; to start  
playback.  
MP3, CD-ROM, CD-I, CDV,VCD, DVD or  
computer CDs are not possible for playback.  
Finding a passage within a  
track  
During playback, press and hold or §.  
The CD is played at high speed and with  
reduced volume.  
IMPORTANT!  
CDs encoded with copyright protection  
technologies by some record companies may  
be unplayable by this product.  
1
2
1
2
Adjust the Source selector to CD.  
When you recognize the passage you want,  
release or § to resume normal playback.  
Open the CD door, and insert a CD with  
the printed side facing up, then press the CD  
door gently to close.  
Helpful hints:  
When your searching reaches the end of the  
last track, the CD goes to stop mode.  
Display shows --, and later the total  
number of tracks. (See 3)  
3
4
Press 2; to start playback.  
To pause playback, press 2;  
.
Display: 2 flashes. (See 4)  
5
6
To resume, press 2; again.  
To stop CD playback, press  
9.  
Helpful hints:  
CD play also stops when:  
you open the CD door;  
you select TUNER or OFF sound source;  
the CD has reached the end.  
CD Player  
Programming track num-  
bers  
You may store up to 20 tracks in the desired  
sequence. If you like, store any track more  
than once.  
Different play modes:  
REPEAT. and SHUFFLE  
(See 6, 7)  
REPEAT  
You can play the current track or the whole  
disc repeatedly, and combine REPEAT  
modes with PROG (PROGRAM).  
1
In the stop position, press PROG to activate  
programming.  
Display: PROG and 00 flash. (See 5)  
REP plays the current track continuously.  
2
3
Press  
number.  
or  
§
to select your desired track  
REP ALL repeats the entire CD/program  
1
To select play mode, press REPEAT once or  
more.  
The display shows REP icon or REP ALL  
Press PROG to store the desired track  
number.  
Display: PROG and 00 flash for you to  
program the next track.  
icon.  
2
3
Press 2; to start playback in the stop/pause  
position.  
To return to normal playback, press REPEAT  
repeatedly until the modes are no longer dis-  
played.  
4
Repeat steps 2 to 3 to select and store all  
desired tracks in this way.  
If you attempt to store more than 20  
tracks, no track can be selected and the  
display shows --.  
You can also press 9 to cancel your play  
mode.  
5
To play your program, press  
2/;.  
SHUFFLE  
You can play all the tracks in random order.  
Helpful hints :  
When playback of your program comes  
to the stop position, your set returns to  
normal playback.To re-enter program  
mode, press PROG in the stop position.  
1
2
In the stop position, press SHUFFLE to  
switch on shuffle play.  
Display shows SHUF icon.  
To switch off shuffle play, press 9.  
Helpful hints:  
During the shuffle play, when REP function is  
Reviewing the program  
In the stop position, press PROG repeatedly  
to see your stored tracks.  
selected, the set plays the current shuffled track  
repeatedly, or when the REP ALL function is  
selected, it repeats the shuffle play of the entire  
CD.  
Erasing a program  
You can erase the contents of the memory  
by:  
– in the stop position, press PROG to enter  
program mode, and then press 9.  
– selecting TUNER or OFF  
;
– opening the CD door;  
Maintenance & Safety (See 8)  
CD player and CD handling  
Safety information  
If the CD player cannot read CDs correctly,  
use a cleaning CD to clean the lens before  
taking the set to repair.  
Place the set on a flat, hard and stable surface  
so that the system does not tilt.  
Where the MAINS plug or an appliance cou-  
pler is used as the disconnect device, the dis-  
connet device shall remain readily operable.  
Never touch the lens of the CD player!  
Sudden changes in the surrounding  
temperature can cause condensation on the  
lens of your CD player. Playing a CD is then  
not possible. Do not attempt to clean the  
lens but leave the set in a warm environment  
until the moisture evaporates.  
Do not expose the set, batteries, CDs to  
humidity, rain, sand or excessive heat caused  
by heating equipment or direct sunlight.  
The apparatus shall not be exposed to drip-  
ping or splashing.  
Always close the CD door to avoid dust on  
the lens.  
Adequate ventilation with a minimum gap of  
15cm (6 inches) between the ventilation  
holes and surrounding surfaces is necessary  
to prevent heat build-up.  
To clean the CD, wipe in a straight line from  
the center towards the edge using a soft,  
lint-free cloth. Do not use cleaning agents as  
they may damage the disc.  
Do not cover the ventilation openings with  
items such as newspapers, table-cloths, cur-  
tains, etc.  
Never write on a CD or attach any stickers  
to it.  
No objects filled with liquids, such as vases,  
shall be placed on the apparatus.  
No naked flame sources, such as lighted can-  
dles, should be placed on the apparatus.  
The mechanical parts of the set contain self-  
lubricating bearings and must not be oiled or  
lubricated.  
To clean the set, use a dry cloth. Do not use  
any cleaning agents containing alcohol, ammo-  
nia, benzene or abrasives as these may harm  
the housing.  
Troubleshooting  
If a fault occurs, first check the points listed below before taking the set for repair.  
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.  
WARNING:  
Do not open the set as there is a risk of electric shock. Under no  
circumstances should you try to repair the set yourself, as this will  
invalidate the guarantee.  
Problem  
Note:  
Make sure the CD is not encoded with copy-  
right protection technologies, as some do not  
conform to the Compact Disc standard.  
Possible cause  
• Remedy  
No sound /power  
The CD skips tracks  
Volume not adjusted  
CD damaged or dirty  
• Adjust the VOLUME  
• Replace or clean CD  
Power cord not securely connected  
• Connect the AC power cord properly  
Batteries dead/ incorrectly inserted  
• Insert (fresh) batteries correctly  
Headphones connected to the set  
Program/shuffle is active  
• Exit program/shuffle mode  
Note: A CD badly scratch or dirty may result in  
improper operation.  
Disconnect headphones.  
CD contains non-audio files  
• Press , § once or more to skip to a CD audio  
track, instead of the data file.  
Display does not function properly / No  
reaction to operation of any of the  
controls  
Electrostatic discharge  
• Switch off and unplug the set. Reconnect after a  
few seconds  
--, Er or 01 indication  
No CD inserted  
Insert a CD  
CD badly scratched or dirty  
Replace/clean CD, see Maintenance  
Laser lens steamed up  
• Wait until lens has cleared  
CD-R/CD-RW is blank or not finalized  
Use a finalized CD-R/CD-RW or suitable CD  
Audio disc only  
AUSTRALIA -  
Philips ManufacturersWarranty for Australia only  
These warranty conditions are valid for the  
following consumer electronics products:  
ColourTelevisions, ProjectionTV, Plasma &  
LCDTV, Video Cassette Recorders, CD  
Recorders & Players, DVD Players, DVD  
Recorders, DVD Recorders with HDD,Audio  
Systems, HomeTheatre systems, Digital Set  
Top Box & Portable Audio products.  
Care Centre for free replacement of faulty accessories.  
8. This Manufacturers Warranty is neither transferable  
nor valid in countries other than Australia.  
This warranty does not cover:  
a) Mileage or travel outside the normal service area  
covered by selected Authorised Service Centre.  
b) Service costs arising from failure to correctly  
adjust the controls of the product or to observe the  
instructions, or inspections that reveal that the  
product is in normal working order.  
The benefits given to the purchaser by this  
warranty are in addition to all other rights  
and remedies which the purchaser has in  
respect of the product under theTrade  
PracticesAct or other Commonwealth or  
State Law.  
c) Product failures caused by misuse, neglect,  
accidental breakage, transit damage, inexpert repairs  
or modification by un-authorised persons, external  
fires, lightning strikes, floods, vermin infestation or  
liquid spillage.  
Philips Consumer Electronics warrants its products to  
the purchaser as follows and subject to the stated  
conditions.  
d) Cleaning of video or audio heads.  
1Year Free Repair Service - at Philips ASC  
e) Inadequate receiving antennae.  
f) Replacement of worn or used batteries or other  
ColourTelevision, PlasmaTelevision, LCDTelevision,  
ProjectionTelevsion, DVDR/VCR Combo, DVD  
Recorders with Hard Drive, LCD Projectors,Wireless  
Audio Systems,Audio Systems, HomeTheatre  
Systems & Digital Set-Top-Box.  
consumables.  
g) Consumer products used in commercial applications  
(This warranty is limited to 3 months only).  
h) Second hand products.  
1Year free Replacement – at your Retailer  
The conditions contained in this warranty  
card replace and override the provision of  
the Philips World-Wide Guarantee for  
products purchased in Australia and used in  
Australia.  
Portable Audio, MP3 Infotainment products,Video  
Cassette recorders, DVD Player, DVD/VCR Combo  
Player, DVD Recorder without HDD & Portable  
DVD/LCD players.  
Conditions of RepairWarranty  
Service is provided through more than 100  
accredited Authorised Service Centres throughout  
Australia. For direct contact with the nearest  
recommended Authorised Service Centre in capital  
& regional cities/towns  
1. All claims for warranty service should be made to  
your nearest Philips Authorised Service Centre or the  
PhilipsTechnology Care Centre. Reasonable evidence  
of date of purchase must be provided.  
Authorised Service Centre Network  
1300 361 392  
2. This warranty extends only to defects in material or  
workmanship occurring under normal use of the product  
when operated in accordance with the instructions.  
Customer support is provided in Australia by our  
trained call centre staff. For assistance with product  
features and specifications, please call  
3. If a replacement product is supplied under the repair  
policy it is warranted, under this warranty, for the  
remainder of the warranty of the original purchased  
product only.  
Technology Care Centre  
1300 363 391  
4. Home service is provided only within the normal  
service area of one of our recommended Authorised  
Service Centres (ASC). It will be provided for  
television receivers only with a screen side of 67cms  
or above (product includes CRT, LCDTV, PTV, and  
PlasmaTV).Televisions with screen side less than  
67cms and all other products types are to be taken or  
sent by the consumer to the workshop of your  
nearest Authorised Service Centre, at the Consumer’s  
expense.  
Please record the following information for  
your records and keep in a safe place.  
We recommend retaining your purchase  
receipt to assist with any warranty claim.  
Model number:....................................................  
Serial number:....................................................  
Date of purchase:....................................................  
Retailer:....................................................  
5. This Manufacturers Warranty is limited to 3 months  
for the above listed Consumer Electronics products if  
used in commercial applications.  
Philips Consumer Electronics  
6. Philips may, at its discretion choose to replace rather  
a division of Philips ElectronicsAustralia Limited  
ABN 24 008 445 743,  
than repair any product covered by this warranty.  
7. Product accessories are covered by the same  
Level 1, 65 Epping Road NORTH RYDE NSW 2113.  
warranty period. Please contact the PhilipsTechnology  
Warranty valid for all new products purchased after 1st January 2007  
NEW ZEALAND - Guarantee and Service for New Zealand  
Thank-you for purchasing this quality Philips product.  
Philips New Zealand Ltd guarantees this product against defective components and faulty  
workmanship for a period of 12 months. Any defect in materials or workmanship occurring  
within 12 months from the date of purchase subject to the following conditions will be rectified  
free of charge by the retailer from whom this product was purchased.  
Conditions  
1. The product must have been purchased in New Zealand.As proof of purchase, retain the  
original sales docket indicating the date of purchase.  
2. The guarantee applies only to faults caused by defective components, or faulty workmanship  
on the part of the manufacturer.  
3. The guarantee does not cover failures caused by misuse, neglect, normal wear and tear,  
accidental breakage, use onthe incorrect voltage, use contrary to operating instructions,  
or unauthorised modification to the product or repair by an unauthorised technician.  
4. Reasonable evidence (in the form of a sales docket) must be supplied to indicate that the  
product was purchased no more than 12 months prior to the date of your claim.  
5. In the event of a failure, Philips shall be under no liability for any injury, or any loss or  
damage caused to property or products other than the product under guarantee.  
This guarantee does not prejudice your rights under common law and statute,  
and is in addition to the normal responsibilities of the retailer and Philips.  
How to claim  
Should your Philips product fail within the guarantee period, please return it to the  
retailer from whom it was purchased. In most cases the retailer will be able to  
satisfactorily repair or replace the product.  
However, should the retailer not be able to conclude the matter satisfactorily, or if you  
have other difficulties claiming under this guarantee, please contact  
The Guarantee Controller  
Philips New Zealand Ltd.  
4P.O. Box 41.021  
Auckland  
3 (09) 84 94 160  
(09) 84 97 858  
fax 3  
Meet Philips at the Internet  
W
AZ1021  
AZ1021N  
AZ1021C  
CLASS 1  
LASER PRODUCT  
Printed in China  
PDCC-ZH-0736  

TRENDnet Computer Accessories TRENDnet User Manual
Sony Ericsson Z300 User Manual
Sony CD Player NHF800 User Manual
Siemens C62 User Manual
Sears 645B User Manual
Seagate SV355 SERIES SATA ST3500410SV User Manual
Samsung SCH r500 User Manual
Samsung 570DX User Manual
Philips PSA[FM ACT100 User Manual
Nokia SLIDE 2220 User Manual