Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
C62
s
Insert SIM card/battery ............. 8
SAR (European Union)...............63
SAR – International (ICNIRP) .....65
Index..........................................66
Surf & fun.................................. 24
Internet browser (WAP) .......... 24
Games ................................... 25
short
of
ide.
d the
ver-
m the
at:
-sie-
m/
This is a short version of User Guide. You
can download the detailed version from the
2
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
ons
Remember to comply with legal
requirements and local restric-
tions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
The SIM card may be removed.
Caution! Small parts like this
could be swallowed by young
children.
The mains voltage specified on
the power supply unit (Volt)
must not be exceeded. Other-
wise the charging device may
be destroyed.
Only use original Siemens bat-
teries (100 % mercury-free) and
– charging devices. Otherwise
you risk serious damage to
health and property. The battery
could explode, for instance.
You may only open the phone to
replace the battery (100 % mer-
cury-free) or SIM card. You
must not open the battery under
any circum-stances. All other
changes to this device are strict-
ly prohibited and will invalidate
the operating licence.
The ringtone (p. 42), info tones
and handsfree talking are repro-
duced through the loudspeaker.
when it rings or when you have
switched on the handsfree func-
tion (p. 15). Otherwise you risk
serious permanent damage to
your hearing.
3
Safety precautions
Please note:
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Use only Siemens original ac-
cessories. This will avoid poten-
tial risks to health or property
and ensure compliance with all
relevant regulations.
If you wear the phone around your neck,
please use only the Siemens original FCT-
500 Loop Case. In order to avoid any inju-
ries or death from strangulation no other
accessories are allowed for this purpose.
Childs up to 14 years shall not wear the
phone around the neck.
Improper use will invalidate the guarantee!
4
Phone overview
w
1
Integrated antenna
1
Do not interfere the phone un-
neccessarily above the battery
cover, this reduces the signal
strength.
2
3
_ª g
Service provider
2
3
Loudspeaker
05.11.2003 12:30
Display symbols
Signal strength/GPRS available/
battery level.
New MMS Menu
4
5
Control key
See next page
4
5
Input keys
Numbers, letters
6
7
Microphone
Plug socket
Connection for charger, head-
set etc.
6
7
Note
Your phone's display is delivered with a
protective film.
Remove this film before getting started.
In rare cases the static discharge may
cause discolouration at the edges of the
display. However this will disappear within
10 minutes.
5
Phone overview
BOn/Off/End key
3
• Switched off: hold down to switch
on.
• During a call or in an application:
press briefly to finish.
• In menus:press briefly: one level
back. Press and hold: return to
standby mode.
• In standby mode: hold down, to
switch off phone.
_ª g
Service provider
05.11.2003 12:30
New MMS Menu
4
Control key
In lists and menus:
1
2
4
G
D
C
Scroll up/down.
3
6
Select function.
Menu level back.
During a call:
Open call menu.
D
E
5
Display volume setting.
In standby mode:
F
D
C
Open Addressbook.
Open menu.
GPRS info.
Hold down
1
Soft keys
The current functions of these
keys are shown in the bottom
line of the display as
5
6
*
/icons.
§text§
• In standby mode: switch on/off all
signal tones (except alarm).
• For incoming calls: switch off ring-
tones only.
ACall key
2
Dial phone number/name dis-
played, take calls.
In standby mode: Show last
dialled phone numbers.
ꢀHold down
• In standby mode: switch key lock
on/off.
6
Display symbols (selection)
Display symbols
Phone numbers/names:
On the SIM card
s
on)
t
h
d
Signal strength.
Charging.
,
‚
On the SIM card
(PIN 2 protected).
Battery charging status,
e.g. 50%.
In the phone memory.
v
²
Addressbook.
Records.
è
Z
No network access.
p, o
Function activated/deactivated.
Indicates whether upper- or
É
Surf & Fun
ABC/
Abc/abc lowercase letters are active.
ꢁ
Organiser.
™
Text input with T9.
]
~
y
Messages.
Profiles.
«
Activated and available.
ª
Registered.
Extras.
©
GPRS Download.
File system.
Setup.
Ñ
m
n
ꢀ
Headset mode.
±
Auto answer feature on.
All calls are diverted.
Ringer off.
Organiser/Extras symbols
j
Memo.
u
k
Short ring (beep) only.
Call.
v
Ringer only if caller is stored in
the Addressbook.
l
i
Meeting.
w
Alarm clock.
Alarm set.
y
Alarm clock activated.
Stopwatch.
y
ç
µ
Key lock activated.
7
Display symbols (selection)
Soft keys
]
Message received.
‰
Û
\
ꢁ
MMS received.
MMS notifiation received.
Voice mail received.
Unanswered call.
?
@
Save in Addressbook.
Copy from Addressbook.
Depending on your service provider, some
of the symbols displayed here may differ
from those on the phone.
8
Getting started
• Place the battery into the block of
the phone, with the contact area
facing down. Push the battery
carefully downwards.
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your account is
stored. If the SIM card is in credit-
card size, snap out the smaller seg-
ment and remove any rough edges.
• Remove the battery cover by
pressing top centre of the cover
and slide downwards.
• Slide the battery cover upwards
from the bottom of the phone, un-
til it latches into place.
• Insert the SIM card into the slot
with the contact area facing down-
wards and push gently until it en-
gages below the holder (make
sure the angled corner is in the
correct position).
Note
Always switch off phone before removing
the battery!
Only 3 V SIM cards are supported. Please
contact your service provider, if you have
an older card.
9
Getting started
Charge icon not visible
Charging the battery
If the battery was completely dis-
charged, the charging symbol will
not be immediately visible when
connected to the charger. In this
case the battery is fully charged after
4,5–5,5 hours.
The battery is not supplied fully
charged. Plug the charger cable into
the bottom of the phone, plug the
power supply unit into the mains
power socket and charge for at least
3,5 hours.
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty–full):
a d g
A beep sounds when the battery is
nearly empty. The charge level of the
battery is displayed correctly only af-
ter uninterrupted charging/discharg-
ing. You should therefore not remove
the battery unnecessarily and where
possible not interrupt charging prema-
turely.
Display when charging is in progress
h
During charging.
Charging time
An empty battery is fully charged af-
ter about 3,5 hours. Charging is only
possible within the temperature
range of +0 °C to +45 °C. If the tem-
perature rises/falls above/below this,
the charge symbol flashes a war-
ning. The voltage specified on the
power supply unit must not be ex-
ceeded.
Note
The charger will become hot after extended
use. This is normal and not dangerous.
Performance
A full battery will give you between
60–250 hours of standby time or
1,5–4,5 hours of talktime.
To obtain maximum performance of
the battery it must be fully charged
and then emptied at least five times.
10
Switching on/off, PIN
ng on/Turning the phone on/off Switching on your phone
Hold down On/Off/End key
to switch on or off.
for the first time
B
Time and date
The clock must be set to the right
Enter PIN
time once at start-up.
The SIM card can be protected with a
§Change§ Press.
Enter the time, validate
with §OK§.
4–8 digit PIN.
Enter the PIN using the
J
J
number keys. The charac-
ters **** appear to en-
sure nobody can read
§Change§ Enter the date, validate
with §OK§.
your PIN on the display.
Correct errors with §Clear§.
Now you are also asked if you want
to copy the SIM card phonebook ent-
ries to the Addressbook on the
phone. If you choose §Yes§ please do
not interrupt this procedure. During
this time do not accept incoming calls.
Follow instructions on the display.
Please enter
your PIN:
* * * *
You are able to copy data from the
SIM card later on (page 22).
Clear
OK
Note
§OK§
Confirm your input with
the right soft key. Logging
on to the network will
take a few seconds.
Change PIN.................................page 13
Other network..............................page 45
Clear SIM card barring ................page 13
Signal strength
t
Strong receive signal.
U
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
11
Switching on/off, PIN
Emergency number (SOS)
Standby mode
_
g
Only to be used in real emergencies!
By pressing the soft key, §SOS§ you
can make an emergency call on any
network without a SIM card and with-
out entering a PIN (not available in
all countries).
Service provider
05.11.2003
My menu
12:30
Menu
When the name of the service pro-
vider appears on the display, the
phone is in standby mode and ready for
use.
The left soft key may have different
functions pre-assigned.
Hold down the On/Off/End
B
key to return to standby
mode from any menu
ption.
12
General information
User guide
Messages
ion
The following symbols are used to
explain an operation:
É
è Z
ꢁ ] ~
Enter numbers or
letters.
J
y Ñ m
On/Off/End key.
B
My menu
Select
Call key.
A
D
Press the control key on
the side indicated.
<>
Soft keys
Displays a soft key func-
tion.
§Menu§
Select ZRecords.
(In menu; press top of the cont-
rol key).
Press the right soft key to
open the Records sub-
menu.
E
§Select§
Function dependent on
ser-vice provider, may
require special registra-
tion.
L
§Select§
Press the right soft key to
Menu controls
open the Calls missed list.
In this user guide the steps needed
to reach a function are shown in con-
cise form, e.g. to display call list for
missed calls:
Scroll to the required
entry.
F
§View§
Press the left soft key to
display phone number
with date/time.
§Menu§¢ ¢Calls missed
Z
This corresponds to:
§Menu§
Open menu.
(From standby mode: press the
right soft key).
13
Security
Change PIN2
(display only if PIN 2 is available).
Proceed as with Change PIN.
Codes
The phone and the SIM card are pro-
tected against misuse by several se-
curity codes.
Chg.phonecode
Keep these confidential numbers in a
safe place where you can access them
again if required.
The preset phonecode is 0000 for all
phonecode protected functions. You
are able to change it:
§Menu§¢m¢Security¢Codes
Enter current phonecode.
J
§OK§
¢Select function.
Press.
§OK§ Enter new phonecode
PIN control
J
,
,
(4–8 digits).
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivating the control.
§OK§ Repeat new phonecode.
J
Clear SIM-card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
please contact your service provider.
§Select§
Press.
J
§OK§
Enter PIN.
Confirm input.
§Change§ Press.
§OK§
Confirm.
Prevent accidental
activation
Even if PIN entry is deactivated, con-
firmation is required to switch on the
phone. This prevents the phone from
being switched on accidentally, e.g.
when you are carrying it in a bag.
Change PIN
You can change the PIN to any 4–8
digit number you find easier to re-
member.
J
Enter current PIN.
§OK§
Press.
Hold down.
B
§OK§
§OK§ Enter new PIN.
J
J
,
,
Press. The phone switches
on.
§OK§ Repeat new PIN.
14
Making a phone call
a
all
Dialling with number
keys
Redial previous numbers
For redialling previously dialled
numbers:
The phone must be switched on
(standby mode).
Press the Call key once.
A
Dial number (always with
J
Pick out the required
phone number from the
area code, if necessary
G
with international dialling
code).
list, then press ...
... to dial.
§Clear§ A short press clears
the last digit, a long press
clears the entire number.
A
If number is busy
Automatic redial of last number
Press the Call key to dial
the number.
A
§Auto dial§ The phone number is au-
tomatically dialled for up
to 15 minutes at increas-
ing time intervals.
End call
Press the End key briefly.
B
Reminder
The call is ended. Press this key, even
if the other person hung up first.
§Prompt§ A beep reminds you to re-
dial the displayed phone
number after 15 minutes.
Set volume
Press briefly during a call.
E
G
International dialling code
In standby mode, to insert international
dialling codes from the list:
Set volume level and con-
firm with §OK§.
If the Car Kit is used, its volume set-
ting will not affect the usual setting
on the phone.
Hold down until a "+" is dis-
0
played. This replaces the first
two digits of the international
dialling code.
§+List§
Press, select country.
15
Making a phone call
Accept call
Handsfree
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
§Handsfr.§ Activate handsfree
§Answer§ or A
function.
If the phone number has been trans-
mitted by the network, it is dis-
played. If the caller's name is in the
Addressbook, this will be shown in-
stead of the number. If set, a picture
can be displayed instead of the bell
icon.
§Yes§
Switch on.
_
g
Note
Save phone no............................ page 21
Accept call using any key............ page 42
Handsfr.
mmenu
Use the control key to ad-
just the volume.
E
Note
Please make sure you have accepted the
call before holding the phone to your ear.
This will prevent a loud ring tone from
damaging your hearing!
§Handsfr.§ Deactivate.
Note
Always deactivate "handsfree talking"
before holding the phone to your ear. This
will avoid damage to your hearing.
Reject call
§Reject§
or press Bbriefly.
16
Making a phone call
Hold call
L
Conference
L
• You can call another number
during a call.
Call up to 5 parties and link them to-
gether in a conference call. When
the new connection is established:
y menu§ Open the call menu
y menu§ Open menu and select
Hold. The current call is
put on hold.
Hold
Put current call on hold
Dial the new phone number/
Now dial a new number.
When the new connec-
J
Addressbook F. When the new con-
nection is established:
tion is established ...
y menu§ ... open menu and select
Conference. The held call is
joined.
§Swap§
Swap back and forth bet-
ween both calls.
that there is another call waiting
by a special "call waiting" tone
(page 43).
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End
§Swap§
Accept the waiting call
and put the current call on
hold. To swap between
the two calls proceed as
above.
All calls in the conference
B
are ended simultaneously
when the End key is
pressed.
or
B
End the current call.
§Answer§ Accept the new call.
17
Text entry
ry
Press once/repeatedly:
. ,? ! ’ " 0 + - ( ) @ / : _
Hold down: Writes 0.
0
Enter text without T9
Press number key repeatedly until
the required letter appears. The cur-
sor advances after a short delay.
Example:
Writes blank. Press twice
= jumps a line.
1
Pressing briefly once types
2
the letter a, twice the let-
ter b, etc. The first letter in
each name is automatical-
ly written in UPPER CASE.
Special characters
Press briefly. The character
map is displayed:
*
Hold down to write the
¿
’
¡
:
_
*
;
/
.
(
,
)
?
!
+
$
-
1)
"
number.
£
~
Ξ
¤
{
¥
}
Ä, ä/1–9
Umlauts and numbers are
displayed after the rele-
vant letters.
€
@
=
\
&
|
#
^
Ω
[
]
%
Λ
<
>
Φ
§
Γ
∆
Θ
§Clear§
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
π
Σ
Ψ
1
) Line skip
G, H Navigate to character.
§Select§ Press.
Move the cursor
(forwards/back).
H
Press briefly: Switch bet-
ꢀ
T9
ween abc, Abc, abc,
T9
Abc, 123. Status indica-
tor in the top line of the
display is shown.
Hold down: All input modes
are displayed.
Press briefly: Special char-
acters are shown.
*
Hold down: All input lan-
guages are displayed.
18
Text entry
Do not use special characters such as
Ä but write the standard characters,
e.g. A; T9 will do the rest for you.
Text entry with T9.
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Note
Setting a full stop. The word is
0
ended when followed by a
blank space. Within a word, a
full stop represents an apos-
trophe or hyphen:
Activate, deactivate T9
§Options§ Open text menu, select T9
input, then T9 preferred.
e.g. §provider.s§ = provider’s.
§Change§ Activate T9.
Move to the right. Ends a
word.
D
Select Input language
Press briefly: Switch be-
tween: abc, Abc, T9abc,
T9Abc, 123. Status indicator
in the top line of the display.
Hold down: All input modes
are displayed.
Press briefly: Select special
characters (page 17).
Hold down: All input langua-
ges are displayed.
Select the language in which you
want to compose your message.
ꢀ
§Options§ Open text menu, select T9
input then: Input language.
§Select§
Confirm; the new lan-
guage is set.
*
Type a word using T9
The display changes as you proceed.
Therefore, it is best if you finish a
word without looking at the display.
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first.
Simply press the keys once only
where the relevant letter is located.
For "hotel", for example:
press briefly for T9Abc,
The word must be highlighted as
§inverted§. Then press
ꢀ
then
buttons. The displayed
46835
»
word is replaced with a
different word. If this is
also incorrect, repeat until
the correct word is
displayed.
press. A blank ends a
1
word.
19
Text entry
To add a word to the dictionary:
§Spell§ Select.
Predef. text
The phone contains predefined texts
that you can add to your messages
(SMS, MMS). You can also create and
store your personal texts.
Now write the word without T9 sup-
port and accept with §Save§ into the
dictionary.
Unlike personal stored texts, prede-
fined texts cannot be changed or de-
leted.
Correct a word
Words written with T9:
Move left or right,
H
Write personal stored text
§Menu§¢]¢Text module
§Options§ Select New text.
word by word, until
the required word is
§inverted§.
Scroll through the T9
»
§Clear§
word suggestions again.
Write text.
J
Deletes the character to
the left of the cursor and
displays a new possible
word.
§Options§ Select Save.
Accept the default name
or give it a new name,
then save with §OK§.
Words not written with T9:
Move letter by letter to
H
§Clear§
Use predefined texts
the left/right.
Deletes the letter to the
left of the cursor.
Write message
(SMS, MMS).
J
Letters are inserted at the
cursor position.
§Options§ Press.
J
Select Text modules.
G
G
®
T9 Text Input is licensed under one or more of
the following:
Select predefined text
from the list.
U.S. Pat. Nos. 5,818,437, 5,953,541,
5, 187, 480, 5, 945, 928, and 6, 011, 554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
§Select§
Confirm. The text is dis-
played.
§Select§
Confirm. The text is in-
serted into the message
to the right of the cursor.
20
Addressbook
bookThe Addressbook can store up to 500
entries that are managed in the pho-
ne memory. However you can ex-
change data between the Address-
book and the SIM card.
Picture
Assign a picture (calling face) to an
entry. It is displayed if you are called
by the corresponding phone
number.
§Change§ Press and choose a calling
<New entry>
face.
Create a new entry in the standard
directory.
(In the beginning the list
is empty, select §Options§
and then File sys. Now
choose a picture and copy
it to this special Calling
faces folder).
Open Addressbook
F
(in standby mode).
Select <New entry>.
G
J
§Attach.§
The picture is assigned to
the phone number.
Fill in the input fields. The
max. number of charac-
ters is shown in the dis-
play.
Attach/Detach picture
If a picture is assigned to a phone
number, it can be replaced or re-
moved.
§Save§
Save the new entry.
Groups
Select entry with picture
in Addressbook.
G
You can assign entries to different
groups, see page 21.
§Options§ Press.
§Select§
Select a picture.
§Detach§
The assignment is cleared
after confirmation.
Right soft key:
When you scroll through an entry, the right
soft key will change, depending on the in-
put field:
§View§
Display respective picture.
21
Addressbook
Call (search for an entry) Groups
4 groups are preset in your phone to
enable you to arrange your Address-
book entries clearly. You can rename
all groups:
Open Addressbook.
F
Select a name with the
first letter and/or scroll.
G
/
J
§Menu§¢è¢Groups
or
The number is dialled.
A
Edit entry
Open Addressbook
F
Select required entry in
the Addressbook.
(in standby mode).
G
<Groups> Select (the number of en-
tries is listed behind the
group name).
§Options§ Press. Select Edit.
Select the field you want
Highlight a group you
G
G
to change and press §Edit§
(or if you are editing a
group entry, press
§Change§).
want to rename.
§Options§
Rename group
Select and give group a
new name.
Open menu.
Make changes.
J
§Options§ Press. Select Save.
Note
No group: Contains all Addressbook en-
tries that do not belong to a group (name
cannot be changed).
Note
Information on text entry ............. page 17
SMS to group ..............................page 30
22
Addressbook
Ring tone for a group
If you assign a ring tone for a group,
it sounds when one of the group
members calls.
SIM card entry
SIM card entry can’t be used for cal-
ling. You are able to view, copy to
Addressbook and delete SIM card
entries and you can view the capaci-
ty of the SIM.
§Menu§¢m¢Audio ¢Melodies
¢Group calls
Copy to Addressbook
Select a group.
G
§Select§
§Menu§¢è¢SIM entries
Press.
§Options§
Options menu offers you
possibility to copy SIM en-
tries one by one or all at
the time.
Choose a ring tone.
I
§Select§
Press.
Entries stored on the SIM card can be
used on other GSM phones.
Businesscard
Create your own business card. Send
this via SMS to another GSM phone.
§Menu§¢è¢Businesscard
If no business card has been created
yet, you will be asked for your input.
Move from field to field to
put in your details:
G
Name, Phone number,
Address, E-mail, Group,
Picture
§Save§
Press.
Note
The content of the business card corres-
ponds to international standards (vCard).
§Options§ Addressbook menu.
23
Records
Your phone stores the phone num-
bers of calls for convenient redial-
ling.
Durat/charges
You can display the charges and the
duration of calls and set a unit limit
for outgoing calls.
§Menu§¢v
G
Choose a call list and
press §Select§.
§Menu§¢v¢Durat/charges
Select a function:
G
A
Calls missed
Select phone number.
Last call, All outg. calls, All incom.calls,
Remain. units
Dial phone number.
§Select§
Display the data.
L
When displayed, you may do the fol-
lowing:
The phone numbers of calls,
that you have not accepted, are
stored for callback purposes (if the
network supports the "Caller Identi-
ty" feature).
§Reset§
§OK§
Clear display.
End display.
Charge settings
Calls received
L
Accepted calls are listed if the
network supports the "Caller Identi-
ty" feature.
§Menu§¢v¢Durat/charges
¢Charge sett.
Currency (PIN 2 query).
Currency for charge display.
L
L
L
Calls dialled
Access to the last numbers dialled.
Personal rate (PIN 2 query).
Charges per unit/period.
Fast access in standby
mode.
A
Erase records
The contents of all call lists are
deleted.
A/c limit (PIN 2 query).
Fix a credit/usage period on a
special SIM card.
Auto display
Call list menu
Call duration and call charges are au-
tomatically displayed for each call.
The call list menu can be called up if
an entry is highlighted.
§Options§ Open list menu.
24
Internet browser (WAP)
Surf & fun
un
End connection
Hold down to clear down
the connection and to
close the browser.
B
É
§Menu§¢
¢Internet
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
WAP profiles
Internet access may require registra-
tion with your service provider.
É
§Menu§¢
¢Internet¢Profiles
Preparation of the phone for WAP In-
ternet access depends on your serv-
ice provider: If the settings have al-
ready been applied by your service
provider, select and activate the pro-
file. If you have to configure the ac-
cess profile manually, consult your
service provider if necessary.
Homepage
L
A connection is established with the
Internet provider’s portal (may be
specified/configured by default by
your service provider).
Bookmarks
Activate WAP profile
List of URLs for fast access.
You can change the active profile
each time before you access the In-
ternet (if the profile has been set al-
ready).
Internet
L
The browser is activated when se-
lecting the Homepage. The func-
tions of the soft keys vary, depend-
ing on the internet page, for
example "link" or "menu". The con-
tents of the option menus are also
variable.
Select profile, then press
§Select§.
G
Set WAP profile
Up to 5 WAP profiles can be config-
ured (may be limited by your service
provider). The entries may vary de-
pending on the service provider:
Additional information
§Options§ Open the browser menu.
É
Page loading.
G
Now fill in the data fields.
To select the connection profiles, see
Data services, page 44.
To select special charac-
ters, such as @, ~, \, see
page 17.
*
26
Organiser
er You can enter appointments in the
Appointments
Enter new appointment:
Calendar.
§Menu§¢ꢁ¢Select function.
G
F
§Edit§
Select <New entry>.
Make the entries field by
field.
Calendar
Calendar offers a monthly, weekly
and daily views.
Browse through displays
in the selection fields.
Navigate with the control key de-
pending on which view is displayed:
Y New entry
Type:
§Meeting§
Description:
,
G HScroll between weeks/
days/hours.
§Agenda§ Display daily agenda.
Appointments for the current day
are displayed in chronological order
in the agenda. If an appointment
time is reached with the alarm set,
you will hear a signal tone.
Location:
Save
Edit
Types of appointment:
Memo. Description with up
u
v
to 50 characters.
Call. Enter phone number.
It is shown with alarm.
Meeting. Description with
up to 50 characters.
w
Alarm:
Select a time for alarm before the ap-
pointment:
On time, 5 min before, 15 min before,
30 min before, 1 hour before, 1 day
before, 1 week before, No alarm.
27
Organiser
Reoccurrence:
Select a timeframe for repeating the
appointment:
None, Daily, Weekly, Monthly, Annual
§Save§
Save the appointment.
Note
Indication in display, that alarms have
been set: alarm clock, appoint-
u
y
ments.
Deactivate all alarms................... page 34
Set alarm tone............................. page 42
28
Voice mail/CB services
ail/
ices
Save call divert number
Voice mail/mailbox
Calls are diverted to this phone
number.
Most service providers offers you an
external answering service. In this
mailbox a caller may leave a voice
message for you
§Menu§¢m¢Phone setup ¢Divert
¢e. g. Unanswered¢Set
• if your phone is switched off or
not ready to receive,
Enter call divert number and register
vert will be confirmed after a few
seconds. Further information on call
divert can be found on page 43.
• if you do not want to answer,
• or if you are making a phone call.
You may have to register for this
service with your service provider
and perform some manual settings.
Listen to
A new voice mail can be announced
as follows:
L
Settings
Your service provider supplies you
with two phone numbers:
L
]
A \icon with beep or
a SMS
message indicates a new voice mail.
Call your mailbox and listen to your
message(s).
Save mailbox number
Call this phone number to listen to
the voice mails left for you.
Hold down (if necessary
1
enter mailbox number
once only). Confirm with
§OK§ and §Mailbox§ depend-
ing on your service pro-
vider.
§Menu§¢]¢Msg. setup
¢Change voice mail no.
Enter mailbox number and confirm
with §OK§.
CB services
§Menu§¢]¢Msg. setup
¢CB services
Some service providers offer infor-
mation services (info channels). If re-
ception is activated, your Topic list
will supply you with messages on
the activated topics.
29
SMS
You can transmit / receive a very
long messages (up to 912 / 1368
characters) on your phone: these are
automatically composed from sever-
al "normal" SMS messages (note
higher charges).
Receiving SMS
Arrival of new SMS an-
nounced on display. To
]
read the SMS, press left
soft key.
Scroll through the mes-
sage line by line.
Additionally you can insert pictures
and sounds in a SMS.
F
§Reply§
Function for a direct reply.
Writing and sending SMS
messages
Ringtones, icons ...
You can receive ringtones, icons and
animations via SMS.
Write text (for informa-
Highlight the received
item.
F
J
tion on text entry see
page 17).
§Options§ Open the menu.
Press.
A
Save
Select and save the item
to the specific folder.
Enter the phone number
or select it from the Add-
ressbook.
/ @
J
Archive
§OK§
Confirm. Send the SMS to
the service centre for
transmission.
§Menu§¢]¢SMS-Archive
The list of SMS messages stored in
the phone is displayed.
30
SMS
Special functions
§Options§ Open options menu.
SMS to group
Send SMS as a "circular" to a group:
Send
Select.
§Group§
Press. Addressbook is
opened. Select a group
and send SMS.
Picture&sound
Insert pictures and sounds into the
message.
Picture&sound
Select.
Select section, then
choose an entry and con-
firm.
G
Predefined text
Text modules
Select. Use predefined
texts (page 18).
31
MMS
The Multimedia Messaging Service
Choose the first content
G
§Select§
enables you to send texts, pictures
object for the new MMS.
(also photos) and sounds in a com-
bined message to another mobile
phone or to an e-mail address.
All elements of a MMS message are
merged to form a "slide show".
Press.
§Edit§
Use Edit soft key for com-
posinguntilyourmessage
is ready.
Depending on your phone’s settings,
you will receive either the complete
message automatically or a notifica-
tion that a MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
To preview a message
§Options§ Press. Select Preview.
Insert additional pages
§Edit§
Open menu.
New slide Select.
To send MMS
Writing/sending MMS
messages
§Options§ Press.
Send
Select.
A MMS consists of the address head-
er and the content.
Enter MMS address
To:/Cc: /Bcc:
Phone number/e-mail ad-
dress of recipient.
/ @
J
§Menu§¢]¢New MMS
Subject: Enter heading.
J
Add Text
Priority: select priority by
pressing §Edit§ and choose
from Low, Normal and
High.
Add Picture
Add Sound
New recording
Select
32
MMS
MMS message with Camera/
Recorder applications
Take a photo by QuickPic camera,
add your own recording and send a
message via MMS!
Receive/read MMS
Arrival of new MMS an-
nounced on display.
/
Û
‰
_
g
After activating the camera
§Take§
Take a photo.
Service provider
§Options§ Press and scroll to the
functionality Send MMS.
Select the required picture
05.11.2003
12:30
quality (hi-res/lo-res).
‰
Menu
§Add§
Press and select New
recording.
soft key.
§Record§ Press and recording starts
Depending on the profile setting
(page 33):
immediately.
§Stop§ press to finish re-
cording,
• receive complete MMS
§Play§ press to play-back re-
corded message, and fi-
nally Exit to get to MMS
application.
or
• the notification is opened. Press
§Receive MMS§ to receive the com-
plete MMS.
§Options§ Open menu and select
Send. Fill the recipient
address and subject for
the message and it is
Cancel the function with B.
Functions for editing MMS can be
found under §Options§.
ready to be send out!
33
Message lists and profiles
elistsMessage lists
Message profiles
iles
All SMS and MMS messages are
stored in one of the following lists
according to status.
§Menu§¢]¢Msg. setup
¢Select message profile type.
Profiles have to be created for SMS
and MMS functions. The transmis-
sion characteristics are defined in
these. The data for SMS and MMS
profiles may already have been en-
tered. If not, your service provider
will supply you with the relevant in-
formation.
Inbox
§Menu§¢]¢Inbox
¢Message type.
The list of SMS or MMS messages re-
ceived is displayed.
Unsent
Additional information is available in
the comprehensive operating in-
structions on the Internet at:
§Menu§¢]¢Unsent
¢Message type.
The list of not yet successfully trans-
mitted SMS or MMS messages is dis-
played.
Sent
§Menu§¢]¢Sent
¢Message type.
The list of sent SMS or MMS messa-
ges is displayed.
§Options§ You can use comprehen-
sive function menus to
edit the messages.
Note
T9 settings .................................. page 41
34
Profiles
A profile allows several settings to be
made with one function in order, for
example, to adapt the phone to the
surrounding level of noise.
Setup
G
Select profile.
§Options§ Open menu and select
Change sett. The list of
available functions is dis-
played.
• Five standard profiles are provided
with default settings. They can
however be changed: Normal envi.,
Quiet environ., Noisy environ., Car Kit,
Headset
Car Kit
• You can set two personal profiles
(<No Title>).
If an original Siemens Car Kit is used
(page 46) the profile is activated au-
tomatically.
• The special profile Aircraft mode
cannot be changed.
Headset
Activate
§Menu§¢~
If an original Siemens headset is
used (page 46) the profile is activat-
ed automatically as soon as the
headset is in operation.
Select default profile or
G
personal profile.
Aircraft mode
§Activate§ Activate profile.
All alarms (appointments, alarm
clock) are deactivated. This profile
cannot be modified. The phone will
switch off if you select this profile.
¾
½
¾
Normal envi.
Quiet environ.
Noisy environ.
Activate
Options
Normal operation
Next time you switch on the phone
and return to normal operation, the
default profile will be activated.
35
Extras
§Menu§¢y¢Select function.
Alarm clock
The alarm will ring at the time set by
you, even when the phone is
switched off.
SAT menu
Your service provider may offer spe-
cial applications such as mobile
banking, share prices, etc. via the
SIM card.
§On§ / §Off§ Activate/deactivate the
alarm.
Setting
If you have such a SIM card, the SAT
(Sim Application Toolkit) menu will
appear in the main menu under Ex-
tras or directly above the control key
(on the left).
§Change§ Display selected time and
days for alarm calls:
H
§Edit§
Navigate to the days.
Set the days for the alarm
calls, then §OK§.
Symbol for SAT menu.
}
Where there are several applications,
these are displayed in a menu.
Calculator
J
With the SAT menu, your phone is
ready to support future additions in
your service provider’s user package.
For further information, please con-
tact your service provider.
Enter number
(up to 8 digits).
Select calculate
function.
Result is displayed.
ꢀ
§.§=§+§-§*§/§ Press the right soft key re-
peatedly.
±
%
Toggle between "+" and "–".
Convert to percentage.
Save, recall number.
Ï,Ð
e
Exponent (max. two digits).
Special keys:
*
Set decimal point.
Add (hold down).
0
36
Extras
Playback
Recorder
You can use this application to
<New record>
03-07-22_23-05-15
My sound 1
record, play and manage sounds and
voice messages.
§Menu§¢y¢Recorder
Play
Options
or
G
§Play§
Select recording.
§Menu§¢]¢New MMS
You are asked if you want
to hear it via loudspeaker,
§No§ / §Yes§.
¢New recording
Individual recording
Use the inbuilt microphone to record
sounds, melodies and voice messag-
es.
Sound file menu
§Options§ Open menu
Add to
MMS
Gets you in MMS editor
where you can continue com-
posing a MMS message.
G
Select <New record>.
§Record§ Press.
Play
Play highlighted file.
Toggles handsfree mode.
Record a new file.
Recording starts. The
maximum time available
and recording duration
are displayed.
Handsfree
New
record
§Pause§ Pause recording,
continue by pressing
§Record§.
Delete
Delete highlighted file.
Delete all files.
Delete all
Rename
§Stop§
§Save§
§OK§
End recording.
Name your recording.
Confirm.
Rename the selected file.
Note
If you receive a call during the recording,
the recording is stored under a default
name (yy-mm-dd_hh-mm-ss) and can be
renamed later.
37
Extras
Stopwatch
Camera (Accessories)
Two intermediate times can be
clocked and stored.
You can use the phone to immedi-
ately view, save and send photos you
have taken with the QuickPic cam-
era. Pictures can be taken in two dif-
ferent formats:
§Reset§
ꢀ
*
Reset to zero.
Start/stop.
• Low resolution:
Intermediate time.
QQVGA160 × 120pixels, memory
size up to 6 KB to send as a picture
message (page 31).
Countdown
A set time elapses. The last 3 se-
conds are indicated by a beep. At the
end a special beep sounds.
• High resolution:
VGA 640 × 480 pixels, memory
size of one shot up to 40 KB – e.g.
for further editing on PC. To allow
the picture to be viewed on the
phone display, a QQVGA picture is
created for every VGA shot.
§Set§
Set period of time.
Start counter.
§Start§
§Stop§
§Edit§
Interrupt counter.
Change period of time.
§Camera§ Press when the camera
has been attached (in
standby mode).
§Reset§
Reset counter to starting
time.
or
§Menu§¢y¢Camera
The number of shots still available is
shown.
§OK§
Confirm.
The last picture taken is shown.
Scroll through photos.
G
38
Extras
Picture
Sending a photo via MMS
A picture requires a few seconds to
be processed.
You can easily send a photo as an
MMS immediately after taking it.
§Take§
Press. You will hear an ad-
vicing tone when the ex-
posure time has expired.
The photo is shown on
the display and saved au-
tomatically.
§Options§ Open menu.
Send MMS Select. Choose a required
picture resolution (hi-res/
lo-res).
plete the input fields as normally
when sending a MMS message
(page 31).
Flashlight
In the option menu the flashlight
function can be switched on/off.
If the flash is switched on, a com-
mand is given to charge the flash-
light before taking a picture:
§Load§
Press briefly. The flashlight
is charged.
§Take§
Press, the photo is taken.
39
Fast access
ess The left soft key and the number
Bookmarks: Select an URL
keys 2 to 9 (speed dialling numbers)
can each be assigned an important
phone number or a function. The
phone number can then be dialled or
the function can be started by press-
ing a specific key.
from Bookmarks.
§Select§
Confirm setting.
Apply (example)
Press and hold down the
3
key.
Left soft key
My menu
Assign a function/phone number to
this key for fast access.
§My menu§ Set up your own menu.
The list of 10 entries is
preset, but can be
Change (example)
§Internet§ Press briefly.
changed.
§Change§ Pick out the application,
e.g. New SMS.
Change sett.
Each preset entry can be replaced by
another entry from the selection list
of My menu.
Phone number: Pick out a
name (e.g. "Carol") from
the Addressbook.
G
Select entry.
§Select§
Confirm setting.
§Options§ Press and select
Apply (example)
Soft key with a phone number/name
assigned.
Change sett..
§Set§
Press.
Select new entry from the
§Carol§
Hold down.
G
§Set§
selection list.
Press.
Use the number keys 2 to 9 as speed
dialling keys. Key 1 is reserved for
the mailbox (page 28).
If you have selected a phone number
or a WAP favourite as a new entry,
the corresponding application is
started.
Change (example)
Reset all
§Options§ Press and select Reset all.
Press an unassigned
3
number key (2–9):
After confirmation and entering the
phone code, the default entries are
reset.
§Set§
Select the application.
Phone number: Select from
Addressbook.
40
Filesystem
em To organise your files, you can use
the file system like a PC file manager.
The file system assigns 5 special fold-
ers to different data types.
File list menu
§Options§ Open menu
Open
Open file. With Color scheme
you are able to Activate your
choice.
§Menu§¢Ñ
The following folders and files are
displayed:
Delete
Delete highlighted entry.
Delete all entries.
Delete all
Rename
Send via...
Folder
Contents
Format
*.bmx
Change highlighted entry.
Anima-
tions
Animations
MMS. This function is availa-
ble with Camera, Pictures
and Sounds.
Camera
*.jpg
*.col
Photostaken
by camera.
Sort
Set sort criteria
(alphabetical, type).
Color
scheme
Selection of
color
schemes
Attributes
Drive info
Display information on file or
folder selected.
Pictures
Sounds
*.bmp,
Pictures/
images.
*.wbmp,
Display the capacity used
and available.
*.jpg, *.gif,
*.png, *.ems
*.mid, *.imy,
*.amr
Ring tones,
melodies,
voice me-
mos.
Scroll with navigation
key.
G
§Open§
Open folder or execute
file using related applica-
tions.
41
Setup
Screensaver
Screensaver is entered after 1 min
period.
Display
§Menu§¢m¢Display
¢Select a function.
The style for the screensaver can be
chosen from three alternatives:
Language
Digital clock, Picture (select a picture
of your choice) or Energy
Set the language of the display text.
"Automatic" will set the language of
your home service provider. Return
to this language in standby mode:
The screensaver function is ended by
an incoming call or by pressing any
key.
# 0 0 0 0 #
A
Additional screensavers:
*
T9 input
Start up anim.
T9 preferred
Activate/deactivate the animation to
be shown when switching the phone
on.
Activate/deactivate intelligent text
entry.
Input language
Select language for text entry.
Shutdn anim.
Activate/deactivate the animation to
be shown when switching the phone
off.
Wallpaper
Set background graphic for display.
Own greeting
Logo
Enter greeting to be displayed in-
stead of animation when phone is
switched on.
Choose picture to be displayed in-
stead of the provider logo.
Additional logos:
Illumination
Switch display illumination on/off or
set to "Automatic" (switched off in-
creases standby time).
Colour scheme
Select colour scheme for the whole
service system.
Contrast
Set display contrast.
42
Setup
Minute beep
During the call, you will hear a beep
once a minute as a reminder.
Audio
§Menu§¢m¢Audio
¢Select function.
Info tones
Activate/deactivate service and
alarm tones.
Ringer setting
Activate/deactivate the ringer or re-
duce it to a short beep.
Keys
Silent alert
Activate/deactivate the silent alert
(functions in addition to ringer).
§Menu§¢m¢Keys
¢Select function.
Volume
Set the volumes for ring tones.
Any to answer
You can press any key to accept an
incoming call
Note
(except
).
B
Please make sure you have accepted the
call before holding the phone to your ear.
This will prevent a loud ring tone from
damaging your hearing!
Key tones
You can set the acoustic key tone:
Click or Tone or Silent
Melodies
Set different ringtones for types of
call/functions.
Call screening
Only calls from numbers that are in
the Addressbook or in a group are
signalled audibly or by silent alert.
Other calls are only displayed.
Key tones
You can set the acoustic key tone:
Click or Tone or Silent
43
Setup
All calls
Phone setup
L
Divert all calls. Symbol in
the top line of the display
in standby mode.
n
§Menu§¢m¢Phone setup
¢Select function.
Check status
After a short pause the current infor-
mation is shown.
Call waiting
If you are registered for this service,
you can check whether it is set and
activate/deactivate it.
L
p,o Condition is set, not set.
s
Status unknown
(e.g. with a new SIM
card).
Hide ID
L
If activated, your phone number will
not appear on the recipient’s display
(depending on the service provid-
ers).
Clear all
All set diversions are cleared.
L
Fact. settings
Divert
Reset phone to default values (facto-
ry setting).
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
# 9 9 9 9 # A
Phone identity
*
Set up call divert (example):
Unanswered
L
Display the phone identity number
(IMEI) and software version.
Select Unanswered
G
(covers the conditions Not
reachable, No reply, Busy)
Auto off
The phone switches off each day at
the set time.
§Select§
Press and select Set. Enter
the phone number to
which the call will be di-
verted.
§OK§
Press. After a short pause,
the setting is confirmed
by the network.
44
Setup
Clock
Connectivity
§Menu§¢m¢Clock
§Menu§¢m¢Connectivity
¢Select function.
¢Select function.
Time/date
GPRS
L
Select Time or Date.
§Yes§ / §No§ Activate/deactivate GPRS.
G
§Change§ Press and edit the right
GPRS info
Display information on the connec-
tivity status.
time or date.
§OK§
Press.
Data services
For the MMS, WAP applications at
least one connection profile must be
set up and activated.
Note
If the battery is removed for longer than
30 seconds, the clock must be reset.
If necessary enter CSD settings and
GPRS settings (you will receive the in-
formation on this from your service
provider):
Time zones
Set the time zone for your area.
Date format
Select DD.MM.YYYY or MM/DD/YYYY
Select a profile.
G
§Edit§
Press, select either CSD
Time format
settings or GPRS settings.
Select 24h or 12h.
§Edit§
Press.
Show clock
Activate/deactivate time display.
Enter data.
Save settings.
J
§Save§
45
Setup
Security
Network
§Menu§¢m¢Security
§Menu§¢m¢Network
¢Select function.
¢Select function.
Codes
Line
L
PIN control, Change PIN, Change PIN2,
Chg.phonecode (see page 13).
Two independent phone numbers
have to be registered.
Only ‚
Restrict calls to SIM-protected num-
bers in the Addressbook.
Network info
The list of GSM networks currently
available is displayed.
L
Barrings
The network barring restricts the use
of your SIM card.
Choose network
Network search is restarted.
L
Auto network
If activated, the next network is di-
alled in the order of your "preferred
networks".
All outgoing: Outgoing calls except
emergency numbers 999 and 112
are barred.
Outgo internat: Only domestic calls are
possible.
Pref. network
Set the service providers you prefer
when you leave your home network.
Out.int.x home: International calls are
not permitted, except for calls to
your home country.
All incoming: The phone is barred for
all incoming calls.
When roaming: You will not receive
calls when outside your home
network.
Status check: Status check for net-
work barring
Clear all: Clear all barrings.
46
Setup
Headset
Accessories
Only in conjunction with an original
Siemens headset. The profile is auto-
matically activated when headset is
plugged in.
§Menu§¢m¢Accessories
¢Select function.
Car Kit
Accept call with Call key or PTT key
(Push To Talk), even when key lock is
activated.
Only in combination with an original
Siemens handsfree Car Kit.
Auto answer
Auto answer
Calls are accepted automatically af-
ter a few seconds. Eavesdropping is
possible!
Calls are accepted automatically af-
ter a few seconds.
Auto off
Auto answer
When powering the unit from the
car, the time between switching off
the ignition and deactivation of the
phone can be adjusted.
If an incoming call is not noticed, there is a
risk of eavesdropping by caller.
47
Data Exchange Software
Data Exchange Software
ge
e
With Data Exchange Software you
can increase the functionality of
your phone together with a
Windows® PC. Phone and PC are con-
nected with one another via data
cable.
The Data Exchange software works
with Windows® Explorer like an ext-
ra drive and mirrors the contents of
the file system (page 40) on your
phone.
You have access the data in the app-
lications on the phone and synchro-
nise these with the PC by easy drag
and drop.
Warning!
When you access the file system, please
ensure that no files are deleted that are
essential to running applications on the
mobile phone, e.g. the "Licenses" index.
48
Questions & Answers
ns &
s
If you have questions regarding the use of your phone, you can contact us at
www.my-siemens.com/customercare at any time. In addition to this we have listed some
frequently asked questions and answers below.
Problem
Possible causes
Possible solution
Phone cannot On/Off key not pressed long
be switched on. enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the dis-
play.
Battery contacts dirty.
Clean contacts.
See also below under
"Charging error"
Insufficient
Frequent use of organiser and
Restrict use if necessary.
standby time. games.
Display illumination switched on. Switch off display illumination (page 41).
Charging error Battery totally discharged.
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
(charge icon
not displayed).
Temp. out of range
+0 °C to +45 °C.
Make sure the ambient temperature is right, wait for a
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device plug socket, clean
them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Battery faulty.
Only use original Siemens accessories.
Replace battery.
SIM error
SIM card not correctly inserted . Check that the SIM card is inserted correctly (page 8).
SIM card contacts dirty.
Use a dry cloth to clean the SIM card.
Use 3V SIM cards only.
SIM card with wrong voltage.
SIM card damaged (e.g. broken). Visually inspect the damage. Have SIM card replaced
by service provider.
49
Questions & Answers
Problem
Possible causes
Possible solution
No connection to
network .
Weak signal.
Move to higher location, to a window or an open
space.
Outside GSM range.
SIM card not valid.
Contact the service provider.
New network not authorised. Try manual selection or select a different network
(page 45).
Network barring is set.
Network overloaded.
Signal too weak.
Try again later.
Phone loses
network.
(page 45). Switching the phone off and on may speed
this up.
‘
Calls not possible. Second line set.
New SIM card inserted.
Set first line
(page 45).
Check for new restrictions.
Reset limit with PIN 2 (page 23).
Load credit.
Charge limit reached.
Credit used up.
Certain uses of the Call restrictions are set.
phone not possible.
Barrings may be set by your service provider. Check
barrings (page 45).
No entries in Add- Addressbook is fulll.
ressbook possible.
Delete entries in Addressbook or transfer to SIM card
(page 21).
Voice mail does not Call divert to the mailbox not Set call divert to the mailbox (page 43).
work
set.
SMS (text mes-
sage) flashing.
SMS memory is full.
To free up capacity, delete or file messages (SMS).
Contact your service provider.
Function cannot
be set.
Not supported by service
provider or registration re-
quired.
Memory problems Phone memory full.
for, e.g. messages,
ring tones, pictures.
Delete files in the applicable areas.
No WAP access.
Profile not activated, profile Activate WAP profile (page 24), set (page 24). If nec-
settings wrong/incomplete. essary ask your service provider.
50
Questions & Answers
Problem
Possible causes
Possible solution
Message cannot be Service provider does not support
Contact your service provider.
sent.
this service.
Phone number of the service centre Set service centre (page 33).
is not set or it is wrong.
SIM card contract does not support Contact your service provider.
this service.
Service centre too busy.
Repeat message.
Recipient does not have a compati- Check.
ble phone.
EMS pictures and
Destination phone does not support
sounds not displayed the EMS standard.
at destination phone.
No Internet access
possible.
Incorrect WAP profile set, or wrong Check settings or ask your service provider
or incomplete settings.
if necessary.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied
with the SIM card according to the instruc-
tions. If the PUK (MASTER PIN) has been
lost, please contact your service provider.
Service provider
code error.
No authorisation for this service.
Contact your service provider.
Too few/too many
menu entries.
Functions may have been added or Check with your service provider.
removed by your service provider via
the SIM card.
Charge counter does Charge pulse is not transmitted.
not work.
Contact your service provider.
Damage
Severe shock.
Remove battery and SIM and insert them again. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
mantle the phone!
Reset all settings to factory default (see also page 43): # 9 9 9 9 # A
*
51
Customer Care
er
If repair work is necessary, please contact
one of our service centres:
We offer fast, individual advice! You have
several options:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Our online support on the Internet:
We can be reached any time, any place.
You are given 24 hour support on all as-
pects of our products. Here you will find an
interactive fault-finding system, a compila-
tion of the most frequently asked ques-
tions and answers, plus user guides and
You will also find the most frequently
asked questions and answers in the sec-
tion entitled Customer Care, page 48 in
this user guide.
You can also get personal advice about our
range of products on our Premium Hotline:
United Kingdom............................ 09069597500
(£ 0.75 per minute)
Qualified Siemens employees are waiting to
offer you expert information about our prod-
ucts and installation.
In some countries repair and replace serv-
ices are impossible where the products are
not sold through our authorised dealers.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the
*
software version (to display, press # 0 6 #,
*
then info) and if available, your Siemens
Service customer number.
52
Customer Care
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman........................................................79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam................................................49 43 73 23
Zimbabwe ............................................04 36 94 24
53
Care and maintenance
d
ance
Your phone has been designed and
The suggestions given above apply
crafted with great care and attention
and should also be treated with care.
The suggestions below will help you
to enjoy your phone for many years.
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary, re-
pair the device.
• Protect your phone from moisture
and humidity! Precipitation, hu-
midity and liquids contain miner-
als that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power sup-
ply and remove the battery!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot ar-
eas. High temperatures can short-
en the life of electronic devices,
damage batteries and warp or
melt certain plastics.
• Do not store your phone in cold ar-
eas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form in-
side the phone, which may
damage electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can dam-
age internal circuit boards!
• Do not use harsh chemicals, clean-
ing solvents, or strong detergents
to clean the phone!
54
Product data
data Declaration of conformity
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here
the number of the SIM card (on the card):
..............................................................
Siemens Information and Communi-
cation mobile hereby declares that
the phone described in this user
guide is in compliance with the es-
sential requirements and other rele-
vant provisions of European Direc-
tive 1999/5/EC (R&TTE).
15-digit serial number of the phone (under
the battery):
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you re-
quire a copy of the original.
..............................................................
Customer Service number of the service
provider:
..............................................................
Lost phone
0889
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
Technical data
GSM class:
Frequency range: 880 … 960 MHz
GSM class: 1 (1 Watt)
Frequency range: 1,710 … 1,880 MHz
GSM class: 1 (1 Watt)
Frequency range: 1,850 … 1,990 MHz
4 (2 Watt)
Weight:
Size:
75 g
101x44x20 mm
(72 ccm)
Li-Ion battery:
630 mAh
Operating temp.: –10 °C … 55 °C
Standby time:
Talk time:
60...250 h
1,5 ... 4,5 h
3.0 V
SIM card:
55
Battery quality statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As a
result the operating time of your mo-
bile phone may be considerably re-
duced, even after a full recharge of
the battery.
nt
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
56
Guarantee certificate (UK)
ee Without prejudice to any claim the user (cus-
dom the Guarantee is issued by Sie-
mens plc, Siemens House, Oldbury,
Bracknell, Berkshire, RG12 8FZ.
•Any other claims resulting out of or in
connection with the device shall be ex-
cluded from this Guarantee. Nothing in
this Guarantee shall attempt to limit or
exclude a Customers Statutory Rights,
nor the manufacturer's liability for
death or personal injury resulting from
its negligence.
•The duration of the Guarantee shall not
be extended by services rendered un-
der the terms of the Guarantee.
•Insofar as no Guarantee default exists,
Siemens reserves the right to charge
the customer for replacement or repair.
•The above provisions does not imply a
change in the burden of proof to the
detriment of the customer.
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the condi-
tions set out below:
te
•In the case of new devices and their
components exhibiting defects result-
ing from manufacturing and/or material
faults within 24 months of purchase,
Siemens shall, at its own option and
free of charge, either replace the de-
vice with another device reflecting the
current state of the art, or repair the
said device. In respect of parts subject
to wear and tear (including but not limit-
ed to, batteries, keypads, casing), this
warranty shall be valid for six months
from the date of purchase.
•This Guarantee shall be invalid if the
device defect is attributable to improp-
er treatment and/or failure to comply
with information contained in the user
manuals.
• This Guarantee shall not apply to or ex-
tend to services performed by the au-
thorised dealer or the customer
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
themselves (e.g. installation, configu-
ration, software downloads). User
manuals and any software supplied on
a separate data medium shall be ex-
cluded from the Guarantee.
•The purchase receipt, together with the
date of purchase, shall be required as
evidence for invoking the Guarantee.
Claims under the Guarantee must be
submitted within two months of the
Guarantee default becoming evident.
•Ownership of devices or components
replaced by and returned to Siemens
shall vest in Siemens.
•This Guarantee shall apply to new de-
vices purchased in the European Un-
ion.
For Products sold in the United King-
57
Guarantee certificate (IRL)
ee Without prejudice to any claim the user (cus-
ration, software downloads). User
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the condi-
tions set out below:
manuals and any software supplied on
a separate data medium shall be ex-
cluded from the Guarantee.
te
•The purchase receipt, together with the
date of purchase, shall be required as
evidence for invoking the Guarantee.
Claims under the Guarantee must be
submitted within two months of the
Guarantee default becoming evident.
•Ownership of devices or components
replaced by and returned to Siemens
shall vest in Siemens.
•This Guarantee shall apply to new de-
vices purchased in the European Un-
ion. For Products sold in the Republic
of Ireland the Guarantee is issued by
Siemens Ireland Limited, Ballymoss
Road, Sandyford Industrial Estate,
Dublin 18 - The Republic of Ireland.
•Any other claims resulting out of or in
connection with the device shall be ex-
cluded from this Guarantee. Nothing in
this Guarantee shall attempt to limit or
exclude a Customers Statutory Rights,
nor the manufacturer’s liability for
death or personal injury resulting from
its negligence.
•In the case of new devices and their
components exhibiting defects result-
ing from manufacturing and/or material
faults within 24 months of purchase,
Siemens shall, at its own option and
free of charge, either replace the de-
vice with another device reflecting the
current state of the art, or repair the
said device. In respect of parts subject
to wear and tear (including but not limit-
ed to, batteries, keypads, casing), this
warranty shall be valid for six months
from the date of purchase.
•This Guarantee shall be invalid if the
device defect is attributable to improp-
er care or use and/or failure to comply
with information contained in the user
manuals.
In particular claims under the Guaran-
tee cannot be made if:
•The device is opened (this is classed as
third party intervention)
•Repairs or other work done by persons
not authorised by Siemens.
•The duration of the Guarantee shall not
be extended by services rendered un-
der the terms of the Guarantee.
•Insofar as no Guarantee default exists,
Siemens reserves the right to charge
the customer for replacement or repair.
•The above provisions does not imply a
change in the burden of proof to the
detriment of the customer.
•Components on the printed circuit
board are manipulated
•The software is manipulated
•Defects or damage caused by drop-
ping, breaking, lightning or ingress of
moisture. This also applies if defects or
damage was caused by mechanical,
chemical, radio interference or thermal
factors (e.g.: microwave, sauna etc.)
•Devices fitted with accessories not au-
thorised by Siemens
To invoke this Guarantee, please contact the
Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompa-
nying user guide.
•This Guarantee shall not apply to or ex-
tend to services performed by the au-
thorised dealer or the customer
themselves (e.g. installation, configu-
58
Menu tree
ee
>
>
>
Address-
è
Show entries
<New entry>
book
New entry
Businesscard
Groups
<Groups>
Sim entries
Records
Calls missed
Z
Calls received
Calls dialled
Erase records
Durat/charges
>
Last call
All outgoing
All incoming
Remain. units
Charge sett.
>
Currency
Personal rate
>
>
Internet
Games
A/c limit
ÉSurf & fun
Auto display
>
>
Calendar
Month
ꢁOrganiser
Week
Agenda
Appointments
New SMS
<New entry>
>
]Messages
New MMS
Inbox
>
SMS
MMS
59
Menu tree
>
>
Unsent
Sent
SMS
]Messages
MMS
>
SMS
MMS
SMS archive
Text module
Call voicemail
Msg. setup
>
SMS
MMS
Change voice mail no.
CB services
>
Normal envi.
~Profiles
Quiet environ.
Noisy environ.
Car Kit
Headset
<No Title>
<No Title>
Aircraft mode
>
Extras
SAT menu (optional)
y
Calculator
Recorder
Stopwatch
Countdown
Camera
60
Menu tree
>
>
Animations
ÑFilesystem
Camera
Color scheme
Picture
Sounds
>
Display
Language
mSetup
>
>
T9 input
Wallpaper
Logo
T9 preferred
T9 language
Colour scheme
Screensaver
Start up anim.
Shutdn anim.
Own greeting
Illumination
Contrast
Style
Picture
Preview
>
Audio
Ringer setting
Silent alert
Volume
>
Melodies
? Calls
Call screening
Key tones
Minute beep
Info tones
Contrast
Group calls
Alarm
Alarm clock
Messages
Start melody
End melody
>
Keys
Any key answer
Key tones
61
Menu tree
>
>
Phone setup
Call waiting
mSetup
Hide ID
>
Divert
All calls
Fact. settings
Phone identity
Auto off
Unanswered
Not reachable
No reply
Busy
>
Clock
Time
Status check
Clear all
Date
Time zones
Date format
Time format
Show clock
>
Connectivity
Security
GPRS
GPRS info
>
>
Data services
MMS, WAP
>
Codes
PIN control
Change PIN
Change PIN2
Chg.phonecode
Only ‚
>
Barrings
All outgoing
Outgo internat
Out.int.x home
All incoming
When roaming
Status check
62
Menu tree
>
>
>
Network
Line
Select line
Block line
mSetup
Network info
Choose network
Auto network
Pref. network
>
>
>
Accessories
Car Kit
Auto answer
Auto off
Headset
Auto answer
63
SAR (European Union)
INFORMATION ON RF EXPOSURE /
with the European Norm EN 50361.
SPECIFIC ABSORPTION RATE (SAR)
This involves measuring the maxi-
mum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during normal operation may be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
an
THIS MOBILE PHONE MEETS THE LI-
MITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO ELECTROMAGNE-
TIC FIELDS
These limits are part of comprehen-
sive recommendations for the pro-
tection of the public. The recom-
mendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
The highest SAR value for this model
phone when tested for compliance
against the norm is
0.72 W/kg****.
The SAR information can also be
found on the Siemens web site at
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the legal
requirements.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the re-
spective technical limit require-
ments must be demonstrated. Only
then the CE mark may be affixed**.
The limit for mobile phones recom-
mended by the Council of the Euro-
pean Union employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. This SAR li-
mit is 2.0 W/kg***. This corresponds
with the requirements of the Inter-
national Commission for Non-Ioni-
zing Radiation Protection ICNIRP and
was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile pho-
nes is determined in accordance
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
Further information:
64
SAR (European Union)
** The CE mark confirms that the
product is in compliance with the le-
gal requirements of the European
Union as a prerequisite for the pla-
cing on the market and the free mo-
vement of goods within the Euro-
pean internal market.
*** averaged over 10 g body tissue.
**** SAR values may vary depen-
ding on national requirements and
frequency bands. SAR information
for different regions can be found at
65
SAR – International (ICNIRP)
nter- INFORMATION ON RF EXPOSURE/
low the maximum value. This is
because the phone is designed to
SPECIFIC ABSORPTION RATE (SAR)
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
)
THIS MOBILE PHONE MEETS THE LI-
MITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO ELECTRO-
MAGNETIC FIELDS
The highest SAR value for this model
phone when tested for use at the ear
is
Your mobile phone is a radio trans-
mitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequen-
cy (RF) energy recommended by in-
ternational guidelines from the In-
ternational Commission on Non-
Ionizing Radiation Protection (IC-
NIRP). These limits are part of com-
prehensive guidelines for the protec-
tion of the public and establish
0.72 W/kg***.
SAR information can also be found at
While there may be differences bet-
ween the SAR levels of various pho-
nes and at various positions, they all
meet the international guidelines for
safe RF exposure.
permitted levels of RF energy for the
population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
The exposure limit for mobile pho-
nes employs a unit of measurement
known as the Specific Absorption Ra-
te, or SAR. The SAR limit stated in the
international guidelines is 2.0 W/
kg**. Tests for SAR are conducted in
all frequency bands using standard
operating positions with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during operation can be well be-
Further information:
** averaged over 10 g of tissue.
*** SAR values may vary depending
on national requirements and fre-
quency bands. information for diffe-
rent regions can be found at
66
A
Audio ......................................... 42
B
quality statement.................... 55
Emergency number.....................11
C
Calculator................................... 35
Call
File system..................................40
Change PIN................................. 13
Charging battery........................... 9
Conference................................. 16
Getting started..............................8
Hide ID........................................43
Hold call......................................16
Hotline........................................51
I
Initial animation ......................... 41
Internet (WAP)............................ 24
Redial previous numbers .............14
S
K
Shown in the display .....................6
Stopwatch ..................................37
Surf & Fun...................................24
Swap ..........................................16
L
List
calls........................................ 23
M
Maintenance tips........................ 54
N
Network barring ......................... 45
O
P
Phone identity number (IMEI) ..... 43
Profiles
messages................................ 33
phone..................................... 34
68
T
Technical data ............................ 54
Time zones................................. 44
U
Upper/lower cases ...................... 17
V
Volume
handset .................................. 14
W
WAP ........................................... 24
Warning tones ............................ 42
|