Synchronizing
Information on Your
Sprint PCS Vision®
Smart Device PPC-6700
©2006 Sprint Nextel. All rights reserved. SPRINT, the "Going Forward" logo, and other
trademarks are trademarks of Sprint Nextel.
June 7, 2006
To install and set up ActiveSync:
1. Install ActiveSync on your PC. After Setup completes, the
Sync Setup Wizard automatically starts when you connect
your device to the PC.
ꢀ. Follow the instructions on the screen to complete the
wizard. In the Sync Setup Wizard, do one or both of the
following:
Create a synchronization relationship between your PC
and the device.
Configure an Exchange Server connection to
synchronize directly with Exchange Server.
ꢁ. Choose information types to synchronize.
When you finish the wizard, ActiveSync synchronizes your
Note: device automatically. Once synchronization completes, you
can disconnect your PPC-6700 from your PC.
Synchronizing Information
When you connect your PPC-6700 to the PC using a USB cable, an
infrared connection, or a Bluetooth connection, ActiveSync will
immediately synchronize. While the device is connected, ActiveSync
synchronizes every time you make a change on either the PC or the
device.
Synchronize Outlook Information
If you have set up a synchronization relationship between your
PPC-6700 and the PC, synchronization keeps Outlook information
up-to-date in both your device and PC. ActiveSync synchronizes
a limited amount of information by default to save storage
space on your device. You can change the amount of information
synchronized for a given information type in Settings for the
information type.
Synchronizing Information on Your PPC-6700
ꢁ
You can set up your PPC-6700 to synchronize with more than
one PC or with a combination of one or more PCs and Exchange
Server. When synchronizing with multiple computers, the items
that you synchronize will appear on all of the computers with
which they are synchronized. For example, if you have set up
synchronization with two PCs (PC1 and PC2), which have different
items, and you synchronize Contacts and Calendar on the device
with both computers, the result is as follows:
Location
New state
All Outlook contacts and calendar appointments that
were on PC2 are now also on PC1.
PC1
All Outlook contacts and calendar appointments that
were on PC1 are now also on PC2.
PC2
All Outlook contacts and calendar appointments from
both PC1 and PC2 are on the device.
Device
Note: Outlook email can be synchronized with only one computer.
To start and stop synchronization:
To synchronize Outlook information and other local
information on the PC, including media files, connect your
PPC-6700 to the PC using Bluetooth, infrared (IR), or a
cable or cradle.
If you are synchronizing directly with Exchange Server, you
can use this connection to the PC to “pass through” to the
network, or you can synchronize without connecting to
the PC over a cellular or Wi-Fi network.
In ActiveSync, tap Sync. To end synchronization before it
completes, tap Stop.
Synchronizing Information on Your PPC-6700
ꢂ
To change which information is synchronized:
1. In ActiveSync on the device, tap Menu > Options.
ꢀ. Do one or both of the following:
Select the check box for any items you want to
synchronize. If you cannot select a check box, you
might have to clear the check box for the same
information type elsewhere in the list.
Clear the check box for any items you want to stop
synchronizing.
ꢁ. To stop synchronizing with one PC completely, tap the PC,
and then tap Delete.
Outlook email can be synchronized with only one computer.
Notes:
To change available synchronization settings, select the type
of information and tap Settings.
To synchronize directly with Exchange Server:
You can set up synchronization with Exchange Server on your
PPC-6700, if it is available to you through your company or
wireless service provider. However, you should first ask your
administrator for the following information and then carry
on with the steps: Exchange Server name, your user name,
password, and domain name.
1. In ActiveSync on the device, tap Menu > Configure Server.
If you have not yet set up synchronization with Exchange
Server, this will say Add Server Source.
ꢀ. In Server address, enter the name of the server running
Exchange Server, and then tap Next.
ꢁ. Enter your user name, password, and domain, and then
tap Next. To change the rules for resolving synchroniza-
tion conflicts, tap Advanced.
ꢂ. Select the check boxes for the types of information items
that you want to synchronize with Exchange Server.
Synchronizing Information on Your PPC-6700
ꢃ
ꢃ. To change available synchronization settings, select the
type of information, and then tap Settings.
6. Tap Finish.
Schedule Synchronization With Exchange Server
You can schedule information to be synchronized automatically
between your device and the Exchange Server, or schedule
synchronization at regular time intervals. Choose between
these two methods, depending on your email volume and which
method you think is more cost-effective.
To receive emails and synchronize other information
instantly:
The Direct Push technology (Push E-Mail feature) enables you
to receive new emails on your device as soon as they arrive in
your Inbox on the Exchange Server. With this feature, items
such as contacts, calendar and tasks are also immediately
updated onto your device when these items have been
changed or new entries have been added on the Exchange
Server. To make Direct Push work, you need to have a 1XRTT or
EVDO dial-up connection on your device.
For the Direct Push feature to work for your device, your private
network (for example, your company’s network) must be using
Microsoft Exchange Server Service Pack 2 (SP2) with Exchange
ActiveSync, and you must have already completed your first
full synchronization with the Exchange Server on your device.
Using Comm Manager
1. On the Today screen, tap Start > Programs > Comm
Manager.
ꢀ. On the Comm Manager screen, tap the Microsoft
Direct Push button
. The button will turn to
; this indicates that you will receive emails as
they arrive. When the button is in the
state,
you need to manually retrieve your emails.
Synchronizing Information on Your PPC-6700
6
Using ActiveSync
1. In ActiveSync on your device, tap Menu > Schedule.
ꢀ. Select As items arrive in the Peak times and Off-peak
times boxes.
When the dial-up and Wi-Fi connections are turned on at the
same time, the Direct Push feature will always go through the
dial-up connection, for which you could be charged as per your
network operator’s service plan.
Note:
To schedule synchronization at regular time intervals:
You can set how often to synchronize during Peak times (which
usually refer to your working hours) when email volume is
high, as well as Off-peak times when email volume is low.
1. In ActiveSync on your device, tap Menu > Schedule.
ꢀ. Select a shorter time interval in the Peak times box for
you to be able to receive emails more frequently.
ꢁ. Select a longer interval in the Off-peak times box.
To set the days and hours that make up your peak and off-peak
times, tap Adjust peak times to fit your schedule.
Tip:
Synchronizing Information on Your PPC-6700
7
Synchronizing Via Infrared and Bluetooth
You can use local wireless technologies such as infrared (IR) and
Bluetooth to establish a connection and synchronize your PPC-6700
with your PC.
To synchronize with a PC via infrared:
1. Follow the instructions in ActiveSync Help on the PC for
setting up your PC to receive infrared beams.
ꢀ. Line up the infrared ports according to the instructions in
the manufacturer’s documentation for your PPC-6700, so
that they are unobstructed and within close range.
ꢁ. On the device, tap Start > Programs > ActiveSync.
ꢂ. Tap Menu > Connect via IR.
ꢃ. Tap Sync.
To synchronize with a PC via Bluetooth:
1. Follow the instructions in ActiveSync Help on the PC for
configuring Bluetooth on your PC to support ActiveSync.
ꢀ. On the device, tap Start > Programs > ActiveSync.
ꢁ. Tap Menu > Connect via Bluetooth. Make sure that
Bluetooth is turned on at the device and the PC, and that
they are within close range.
ꢂ. If this is the first time you have connected to this PC via
Bluetooth, you must first complete the Bluetooth wizard
on the device and set up a Bluetooth partnership between
your PPC-6700 and the PC.
For more information about enabling and configuring
Bluetooth, see your device's full user guide.
You can also use the Sync Setup Wizard to set up the device
to synchronize remotely with Exchange Server. This wizard
is started when you connect your PPC-6700 to your PC after
Note:
installing ActiveSync on the PC.
Synchronizing Information on Your PPC-6700
ꢄ
Synchronizing Music, Video, and Pictures
If you want to carry your music or other digital media along
with you while you travel, works with Windows Media Player to
synchronize music, video, and pictures with your PPC-6700. Other
than selecting the Media information type in ActiveSync to be
synchronized, all media synchronization settings must be set in
Windows Media Player. Before media can be synchronized, you
must do the following:
Install Windows Media Player Version 10 on the PC.
Connect your PPC-6700 to the PC with a USB cable. If the
device is currently connected using Bluetooth or infrared, you
must end that connection before media can be synchronized.
Insert a miniSD card into your PPC-6700 (32MB or larger is
recommended).
Set up a sync partnership between the storage card and
Windows Media Player.
Change Media Synchronization Settings
Once you select the Media information type in ActiveSync to be
synchronized, any of your favorite music, video, and picture files
in Windows Media Player playlists can be synchronized. All you
have to do is set up synchronization in Windows Media Player for
those media files.
To set up a sync relationship with a storage card:
1. Open Windows Media Player.
ꢀ. Click the Sync tab.
ꢁ. Select the storage card.
ꢂ. Click Set up Sync.
For information about using Windows Media Player on the
device, see the full user guide.
Synchronizing Information on Your PPC-6700
ꢅ
Setting Up Email Security
Windows Mobile on your device protects your Outlook emails
through Secure/Multipurpose Internet Mail Extension (S/MIME),
which allows you to digitally sign your messages as well as encrypt
them.
Using authorization keys and certificates, S/MIME allows you to
digitally sign your email messages to prove your identity to the
recipients. Authorization keys are also used when encrypting
messages to improve privacy and prevent undue tampering or
hacking of your messages. You can encrypt a message with or
without a certificate. However, to read an encrypted message, you
need a valid certificate for decrypting email messages.
S/MIME encryption and digital signatures for Windows
Mobile-based devices are available only with Exchange Server
Note: 2003 Service Pack 2 or a later version that supports S/MIME.
If you aren’t using one of these products, or have not yet
synchronized, these options are unavailable.
Digitally Sign and Encrypt All Messages
ActiveSync allows you to set up S/MIME email encryption and
signing. You will have to obtain a valid certificate for signing or
encrypting email before you will be able to sign or encrypt mail
successfully.
1. Tap Start > Programs > ActiveSync.
ꢀ. Tap Menu > Options.
ꢁ. Select the Email information type, and tap Settings. On
the Email Sync Options screen, tap Advanced.
Synchronizing Information on Your PPC-6700
10
ꢂ. Do one or both of the following:
To sign all your outgoing email messages so that
recipients can be certain that the messages were sent
by you and have not been altered in any way, select
the Sign all outgoing email messages check box.
To encrypt all your outgoing
email messages so that the
contents of your messages are
protected from being viewed
by anyone other then the
intended recipients, select the
Encrypt all outgoing email
messages check box.
ꢃ. Tap Choose Certificate to select a certificate for signing
or encrypting outgoing email messages. You can select
certificates to sign or encrypt email messages individually
if you do not choose to sign or encrypt all outgoing email.
Synchronizing Information on Your PPC-6700 11
|