Thank you for purchasing a Sony Ericsson W715 Walkman™.
Stay in touch and enjoy your favorite music in new and
innovative ways.
For additional phone content, go to
www.sonyericsson.com/fun. Register now to get a suite of
tools, free online storage, special offers, news and
Contents
1
This is an Internet version of this publication. © Print only for private use.
2
This is an Internet version of this publication. © Print only for private use.
in any way for your improper use of additional
content or other third party content.
Smart-Fit Rendering is a trademark or a registered
trademark of ACCESS Co., Ltd.
Sony Ericsson W715 Walkman™
UMTS/HSPA band 1/8 GSM/GPRS/EDGE
850/900/1800/1900
This User guide is published by Sony Ericsson
Mobile Communications AB or its local affiliated
company, without any warranty. Improvements and
changes to this User guide necessitated by
typographical errors, inaccuracies of current
information, or improvements to programs and/or
equipment, may be made by Sony Ericsson Mobile
Communications AB at any time and without notice.
Such changes will, however, be incorporated into
new editions of this User guide.
Bluetooth is a trademark or a registered trademark
of Bluetooth SIG Inc. and any use of such mark by
Sony Ericsson is under license.
The Liquid Identity logo, SensMe, PlayNow,
MusicDJ, PhotoDJ, TrackID and VideoDJ are
trademarks or registered trademarks of
Sony Ericsson Mobile Communications AB.
TrackID™ is powered by Gracenote Mobile
MusicID™. Gracenote and Gracenote Mobile
MusicID are trademarks or registered trademarks of
Gracenote, Inc.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2008
Publication number: 1221-2454.2
WALKMAN
is a trademark or a registered
trademark of Sony Corporation.
PLAYSTATION is a trademark or registered
trademark of Sony Computer Entertainment, Inc.
Please note:
Some of the services in this User guide are not
supported by all networks. This also applies to the
GSM International Emergency Number 112.
Please contact your network operator or service
provider if you are in doubt whether you can use a
particular service or not.
Sony, Memory Stick Micro™ and M2™ are
trademarks or registered trademarks of Sony
Corporation.
SyncML is a trademark or registered trademark of
Open Mobile Alliance LTD.
Ericsson is a trademark or registered trademark of
Telefonaktiebolaget LM Ericsson.
Adobe Photoshop Album Starter Edition is a
trademark or registered trademark of Adobe
Systems Incorporated in the United States and/or
other countries/regions.
Microsoft, ActiveSync, Windows, Outlook, Windows
Media and Vista are registered trademarks or
trademarks of Microsoft Corporation in the United
States and/or other countries/regions.
T9™ Text Input is a trademark or a registered
trademark of Tegic Communications. T9™ Text
Input is licensed under one or more of the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928, and 6,011,554; Canadian Pat. No.
1,331,057, United Kingdom Pat. No. 2238414B;
Please read the Important information before you
use your mobile phone.
Your mobile phone has the capability to download,
store and forward additional content, e.g. ringtones.
The use of such content may be restricted or
prohibited by rights of third parties, including but not
limited to restriction under applicable copyright
laws. You, and not Sony Ericsson, are entirely
responsible for additional content that you
download to or forward from your mobile phone.
Prior to your use of any additional content, please
verify that your intended use is properly licensed or
is otherwise authorized. Sony Ericsson does not
guarantee the accuracy, integrity or quality of any
additional content or any other third party content.
Under no circumstances will Sony Ericsson be liable
3
This is an Internet version of this publication. © Print only for private use.
Hong Kong Standard Pat. No. HK0940329; Republic
of Singapore Pat. No. 51383; Euro.Pat. No. 0 842
463(96927260.8) DE/DK, FI, FR, IT, NL, PT, ES, SE,
GB; and additional patents are pending worldwide.
Java, JavaScript and Java-based trademarks and
logos are trademarks or registered trademarks of
Sun Microsystems, Inc. in the U.S. and other
countries/regions.
This product is protected by certain intellectual
property rights of Microsoft. Use or distribution of
such technology outside of this product is prohibited
without a license from Microsoft.
Content owners use Windows Media digital rights
management technology (WMDRM) to protect their
intellectual property, including copyrights. This
device uses WMDRM software to access WMDRM-
protected content. If the WMDRM software fails to
protect the content, content owners may ask
Microsoft to revoke the software's ability to use
WMDRM to play or copy protected content.
End-user license agreement for Sun Java Platform,
Micro Edition.
1. Restrictions: Software is confidential copyrighted
information of Sun and title to all copies is retained
by Sun and/or its licensors. Customer shall not
modify, decompile, disassemble, decrypt, extract,
or otherwise reverse engineer Software. Software
may not be leased, assigned, or sublicensed, in
whole or in part.
2. Export Regulations: Software including technical
data, is subject to U.S. export control laws, including
the U.S. Export Administration Act and its
Revocation does not affect unprotected content.
When you download licenses for protected content,
you agree that Microsoft may include a revocation
list with the licenses. Content owners may require
you to upgrade WMDRM to access their content. If
you decline an upgrade, you will not be able to
access content that requires the upgrade.
This product is licensed under the MPEG-4 visual
and AVC patent portfolio licenses for the personal
and non-commercial use of a consumer for (i)
encoding video in compliance with the MPEG-4
visual standard ("MPEG-4 video") or the AVC
standard ("AVC video") and/or (ii) decoding MPEG-
4 or AVC video that was encoded by a consumer
engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed
by MPEG LA to provide MPEG-4 and/or AVC video.
No license is granted or shall be implied for any other
use. Additional information including that relating to
promotional, internal and commercial uses and
licensing may be obtained from MPEG LA, L.L.C.
decoding technology licensed from Fraunhofer IIS
and Thomson.
associated regulations, and may be subject to
export or import regulations in other countries/
regions. Customer agrees to comply strictly with all
such regulations and acknowledges that it has the
responsibility to obtain licenses to export, re-export,
or import Software. Software may not be
downloaded, or otherwise exported or re-exported
(i) into, or to a national or resident of, Cuba, Iraq, Iran,
North Korea, Libya, Sudan, Syria (as such listing may
be revised from time to time) or any country/region
to which the U.S. has embargoed goods; or (ii) to
anyone on the U.S. Treasury Department's list of
Specially Designated Nations or the U.S. Commerce
Department's Table of Denial Orders. 3. Restricted
rights: Use, duplication or disclosure by the United
States government is subject to the restrictions as
set forth in the Rights in Technical Data and
Computer Software Clauses in DFARS
252.227-7013(c) (1) and FAR 52.227-19(c) (2) as
applicable.
Restricted Rights: Use, duplication or disclosure by
the United States government is subject to the
restrictions as set forth in the Rights in Technical
Data and Computer Software Clauses in DFARS
4
This is an Internet version of this publication. © Print only for private use.
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2) as
applicable.
Instruction symbols
These symbols may appear in the User
guide.
Other product and company names mentioned
herein may be the trademarks of their respective
owners.
Any rights not expressly granted herein are reserved.
Note
Note: Sony Ericsson advises users to backup their
personal data information.
Tip
All illustrations are for illustration only and may not
accurately depict the actual phone.
Warning
SMS Registration:
In order to provide faster and better quality after-
sale services, an SMS will be sent automatically
by the phone (The SMS expense is upon the mobile
fee bill from the operator) to the server of
Sony Ericsson Mobile Communications (China)
Co., Ltd. once the phone is in use. The relevant
information of the SMS will be stored and used for
after-sales service management by Sony Ericsson.
A service or function is network- or
subscription-dependent. Contact
your network operator for details.
>
Use a selection or navigation key to
scroll and select. See Navigation on
page 15.
To use some pre-loaded applications (e.g. TrackID,
MSN) you need first activate data service. Using
data services (GPRS or 3G services) may incur data
traffic fee. Please contact your network operator for
expense details.
5
This is an Internet version of this publication. © Print only for private use.
To insert the battery
Getting started
Assembly
Before you start using your phone, you
need to insert a SIM card and the
battery.
To insert the SIM card
1 Insert the battery with the label side up
and the connectors facing each other.
2 Attach the battery cover and lock it.
1 Unlock the battery cover lock.
2 Remove the battery cover.
3 Slide the SIM card into its holder with
the gold-coloured contacts facing
down.
6
Getting started
This is an Internet version of this publication. © Print only for private use.
Turning on the phone
.
40
To turn on the phone
PIN
You may need a PIN (Personal
Identification Number) to activate the
services and functions in your phone.
Your PIN is supplied by your network
operator. Each PIN digit appears as *,
unless it starts with emergency number
digits, for example, 112 or 911. You can
see and call an emergency number
without entering a PIN.
If you enter the wrong PIN three times in
1 Press and hold down
2 Enter your SIM card PIN, if requested,
and select OK.
3 Select a language.
4 Select Yes to use the setup wizard.
.
Standby
After you have turned on your phone
and entered your PIN, the name of the
network operator appears. This view is
called standby. Your phone is now
ready for use.
If you want to correct a mistake when you
enter your PIN, press
.
SIM card
Using other networks
The SIM (Subscriber Identity Module)
card, which you get from your network
operator, contains information about
your subscription. Always turn off your
phone and detach the charger before
you insert or remove the SIM card.
Making and receiving calls, using
messaging, and data transfer, for
example, Internet-based services,
outside your home network (roaming),
may incur additional costs. Contact
your operator for more information.
You can save contacts on the SIM card
before you remove it from your phone.
Getting started
7
This is an Internet version of this publication. © Print only for private use.
It may take 30 minutes for the battery icon
to appear on the screen.
Help
In addition to this User guide, Feature
guides and more information are
available at
Using the USB charger
To connect the charger and charge
the battery
(The illustrations are for guidance only
and may not accurately depict the
actual phone)
Help and information are also available
in your phone.
To view tips and tricks
1 From standby select Menu > Settings >
the General tab > Setup wizard.
2 Select Tips and tricks.
1 Connect the USB cable (you can get
instructions for three conditions from
the Note) plug to the AC adapter USB
socket, as shown in the illustration. The
USB cable is supplied with your phone.
To view information about functions
• Scroll to a function and select Info, if
available. In some cases, Info appears
under Options.
To view the phone demonstration
• From standby select Menu >
Entertainment > Demo tour.
To view the phone status
• From standby press the volume key.
Phone, memory and battery
information is shown.
2 Connect the USB cable connector to
your phone. Press a key to view the
charging status on the screen. It takes
approximately 3 hours to fully charge
the battery.
Charging the battery
The phone battery is partly charged
when you buy it.
8
Getting started
This is an Internet version of this publication. © Print only for private use.
To remove the charger
USB cable for charging
1 Charge your battery until the battery
icon indicates a full charge.
2 Tilt the USB charger connector
upwards to remove it.
USB cable for transferring
• If there is only one USB cable in the
kit, it is intended for charging your
phone as well as transferring data.
• If there is only one USB cable for the
USB charger in the phone kit, this
USB cable is only intended for
charging your phone.
Note
• If there are two USB cables in the kit
(a USB cable for charging and a USB
cable for data transfer), the USB
cable for charging is only intended
for charging your phone. Do not use
it for transferring data. The USB
cable for the USB charger is only
intended for connection to the AC
adapter to charge your phone. It
must not be used for connection to
a PC. It can only be used for
• To charge your phone,
Sony Ericsson strongly recommends
that you use only Sony Ericsson
branded original batteries, a power
supply which is in accordance with
specification YD/T 1591-2006 (a
Communications Industry standard
of P. R. China), and the USB cable
supplied with your phone. The use
of third-party products may
charging your phone. Never use it
for charging accessories.
decrease the performance of your
Getting started
9
This is an Internet version of this publication. © Print only for private use.
phone and/or pose a risk to your
health or safety.
You can charge the battery for more or
less than 3 hours. Interrupted charging
will not damage the battery.
Performance depends on temperatures,
signal strength, usage patterns, features
selected and voice or data
transmissions. The stand-by time for this
battery is up to 380 hours.
Use only Sony Ericsson branded original
batteries intended for use with your
mobile phone. If you use other batteries
you may not be able to charge your
phone.
10
Getting started
This is an Internet version of this publication. © Print only for private use.
Phone overview
1
2
3
4
Ear speaker
Screen light sensor
Screen
1
2
10
3
Connector for charger, handsfree
and USB cable
5
6
7
8
9
Selection keys
4
5
Navigation key
Call key
11
12
Activity menu key
Memory card slot (under the cover)
6
7
8
10 Video call camera
11 End key, On/off key
12 C key (Clear)
13
9
13 Silent key
Getting started
11
This is an Internet version of this publication. © Print only for private use.
14 Walkman™ key
15 Main camera
16 Volume, digital zoom keys
17 Flash
14
15
16
17
18
18 Camera key
19
20
12
Getting started
This is an Internet version of this publication. © Print only for private use.
Menu overview
PlayNow™*
Call voicemail
Media
Photo
Music
Video
Contacts
Myself
Camera
Games
Web feeds
Settings
New contact
Location services
Tracker
Organiser
File manager **
Alarms
Applications
Calendar
Tasks
Google Maps*
Navigation*
My favourites
Status info
Log
WALKMAN
Settings**
Settings
Notes
Synchronisation
Timer
Stopwatch
Light
Calculator
Code memo
General
Profiles
Calls**
All
Time & date
Language
Update service
Voice control
New events
Shortcuts
Answered
Dialled
Missed
Internet
Entertainment
Online services*
TrackID™
Location services
Games
Flight mode
Security
Setup wizard
Accessibility*
Phone status
Master reset
VideoDJ™
PhotoDJ™
MusicDJ™
Messaging
Write new
Inbox
Messages
Email
Sounds & alerts
Ring volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Remote control
Record sound
Demo tour
IM*
Getting started
13
This is an Internet version of this publication. © Print only for private use.
Message alert
Key sound
Streaming settings
Message settings*
SIP settings
Accessories
Display
Wallpaper
Main menu layout
Theme
Startup screen
Screen saver
Clock size
* Some menus are operator-,
network- and subscription-
dependent.
** You can use the navigation
key to scroll between tabs in
submenus. For more
Brightness
Edit line names*
information, see Navigation
on page 15.
Calls
Speed dial
Smart search
Divert calls
Switch to line 2*
Manage calls
Time & cost*
Show/hide my no.
Handsfree
Open to answer
Close to end call
Connectivity
Wi-Fi
Bluetooth
USB
Phone name
Network sharing
Synchronisation
Device management
Mobile networks
Data communication*
Internet settings
14
Getting started
This is an Internet version of this publication. © Print only for private use.
2 Scroll to a menu item and press the
navigation key right.
Navigation
3 To go back, press the navigation key
left.
To navigate the phone menus
To delete items
• Press
to delete items such as
numbers, letters, pictures and sounds.
Tabs
Tabs may be available. For example,
Settings have tabs.
1 From standby select Menu.
2 Use the navigation key to move
through the menus.
To scroll between tabs
• Press the navigation key left or right.
To select actions on the screen
Shortcuts
You can use keypad shortcuts to go
directly to functions.
• Press the left, centre or right selection
key.
To view options for an item
To use navigation key shortcuts
• Select Options to, for example, edit.
• From standby press
,
,
or to go
To end a function
directly to a function.
• Press
.
To edit a navigation key shortcut
To return to standby
1 From standby select Menu > Settings >
the General tab > Shortcuts.
2 Scroll to an option and select Edit.
• Press
.
To navigate your media
1 From standby select Menu > Media.
Getting started
15
This is an Internet version of this publication. © Print only for private use.
3 Scroll to a menu option and select
Shortc..
Memory
You can save content on the memory
card, in the phone memory and on the
SIM card. Photos and music are saved
on the memory card, if a memory card
is inserted. If not, or if the memory card
is full, photos and music are saved in
the phone memory. Messages and
contacts are saved in the phone
Main menu shortcuts
Menu numbering starts from the top left
icon and moves across and then down
row by row.
To go directly to a main menu item
• Select Menu and press
or
–
,
,
memory, but you can choose to save
them on the SIM card.
.
The Main menu layout must be set to
Memory card
You may have to purchase a memory card
separately.
Activity menu
The activity menu gives you quick
access to:
Your phone supports Memory Stick
Micro™ (M2™) memory card adding
more storage space to your phone. It
can also be used as a portable memory
card with other compatible devices.
• New events – missed calls and new
messages.
• Running apps – applications that are
running in the background.
• My shortcuts – add your favourite
functions to access them quickly.
• Internet – quick access to the
Internet.
You can move content between the
memory card and the phone memory.
page
.
31
To open the activity menu
• Press
.
16
Getting started
This is an Internet version of this publication. © Print only for private use.
To insert a memory card
Phone language
You can select a language to use in
your phone.
To change the phone language
1 From standby select Menu > Settings >
the General tab > Language > Phone
language.
2 Select an option.
Entering text
You can use multitap text input or T9™
Text Input
to enter text. The T9 Text
Input method uses a built-in dictionary.
• Remove the battery cover and insert
the memory card with the gold-
coloured contacts facing up.
To change text input method
• When you enter text, press and hold
down
.
To remove a memory card
To shift between capitals and lower-
case letters
• When you enter text, press
.
To enter numbers
• When you enter text, press and hold
down
–
.
To enter full stops and commas
• When you enter text, press
• Remove the battery cover and press
the edge of the memory card to release
and remove it.
.
Getting started
17
This is an Internet version of this publication. © Print only for private use.
Multitap input only applies when latin
characters are selected as input
language.
To enter a symbol
1 When you enter text, select Options >
Add symbol.
2 Scroll to a symbol and select Insert.
To add words to the built-in dictionary
1 When you enter text using T9 Text
Input, select Options > Spell word.
2 Write the word using multitap input and
select Insert.
To enter text using T9™ Text Input
1 From standby select, for example,
Menu > Messaging > Write new >
Message.
2 If
is not displayed, press and hold
down to change to T9 Text Input.
Entering text - Zi text input
You can use multitap text input or Zi™
text input to enter text. The Zi text input
method uses a built-in dictionary.
3 Press each key only once, even if the
letter you want is not the first letter on
the key. For example, to write the word
“Jane”, press
,
,
,
. Write
By using the Zi text input you only have
to press each key once. Continue writing
a word even if it appears to be wrong.
the whole word before looking at the
suggestions.
4 Use or to view suggestions.
5 Press
to accept a suggestion.
To enter text using Zi text input
1 For example, to write the word “Jane”,
To enter text using multitap
Press
,
,
,
.
1 From standby select, for example,
Menu > Messaging > Write new >
Message.
2 You now have several options:
• If the word shown is the one you
want, press
a space. To accept a word without
adding a space, press
• If the word shown is not the one you
want, press or repeatedly to
to accept and add
2 If
is displayed, press and hold down
to change to multitap text input.
.
3 Press
–
repeatedly until the
desired letter appears.
4 When a word is written, press
add a space.
to
view alternative words. To accept
a word and add a space, press
.
• To enter full stops and commas, press
and then or repeatedly.
18
Getting started
This is an Internet version of this publication. © Print only for private use.
To enter text using multitap
Chinese input
This mobile phone has different input
methods for entering Chinese
characters:
• Press
-
until the character
you want appears.
• Press
• Press
to add a space.
to enter punctuation marks.
• Stroke input
• Pinyin input
To use the keys when entering text
• To change text input method, press
You can use these methods, for
example, to enter Chinese names and
Chinese short messages.
and hold down
• To change writing language, press
and hold down
.
.
• To shift between upper-case letters,
lower-case letters and numbers,
Switching between Chinese input
methods
press
• To delete characters, press
• To delete a whole word, press and hold
down
• To enter numbers, press and hold down
.
In the Chinese editing mode, you can
select and switch quickly to another
input method by pressing and holding
.
.
down
.
-
.
General instructions
To add a word to the dictionary
1 When you enter text using Zi text input,
select Options > Spell word.
2 Enter the word using multitap and select
Save.
Regardless of which input method you
choose, your phone has a function to
speed up the entry of Chinese
Getting started
19
This is an Internet version of this publication. © Print only for private use.
characters. Whenever you enter a
stroke or a Pinyin letter, a candidate
row of the most frequently used
characters containing that stroke or
relating to that letter appears at the
bottom of the screen.
previous row, press . To select a
character in the candidate row, press
the navigation key or press and hold
the key corresponding to the number
above the character you want to enter.
Stroke input
If the character you want is not
A Chinese character is built up of
strokes. There are more than 30 basic
strokes, which are grouped into five
stroke categories. Each category is
represented on the keypad by one of
displayed in the candidate row, press
to present another candidate row.
Continue pressing until the character
you want is displayed. Alternatively,
you can enter the next stroke or Pinyin
letter, and a new set of characters will
immediately be displayed in the
the keys
-
. The Wild Card key
, is used when you are not sure of
which stroke to use.
candidate row. To go back to the
Stroke categories
The five stroke categories are defined in the table below:
Number key Stroke category Basic stroke Stroke name
Character
Over
王 十 在 七 天
海 红 牡 状 习
中 业 上 门 丑
小 水 打 子 承
直 真 质 草
Lift
Down
Down-Hook
Short Slope Down
Long Left Slope
八 九 丹 风 片
20
Getting started
This is an Internet version of this publication. © Print only for private use.
Number key Stroke category Basic stroke Stroke name
Character
Over Slope
香 千 匕 后 丢
而 页 面 学 殷
六 学 雷 心 性
人 火 又 送 林
四 西 酉 酸
Short left Slope
Dot
Right Slope
Down-Curved-Over
Down-Over
山 巨 屯 母 凶
么 去 公 约 能
女 要 好 巡 巢
衣 以 饭 收 长
我 或 民 成 伐
心 必 思 忘
Left Slope-Over
Left Slope-Dot
Down-Lift
Right Slope-Hook
Down-Over-Hook
Down-Over-Curved-Hook 电 也 毛 兄 孔
Down-Over-Left-Slope 专 传 转
Down-Over-Down-Hook 马 与 张 号 费
Down-Over-Down
Over-Hook
鼎 鼐
写 字 皮 通 免
口 已 户 书 骨
Over-Down
Getting started
21
This is an Internet version of this publication. © Print only for private use.
Number key Stroke category Basic stroke Stroke name
Over-Down-Hook
Character
力 习 也 同 永
又 之 登 多 社
及 极 廷 建
Over-Left Slope
Over-Down-Over- Left
Slope
Over-Left Slope- Curved- 阿 队 陈 那 部
Hook
Over-Down-Over-Hook 乃 透 鼐 隽 杨
Over-Down-Over-Down
Curved-Hook
凸
狗 豹 家 逐 狂
Over-Down-Curved-Hook 乙 九 瓦 飞 风
Over-Down-Over
Over-Down-Lift
投 沿 船 凹
话 计 认 讯
? (Wild card key)
Components
that stroke are displayed in the
candidate row.
The basic building units of Chinese
characters are components that are
made up of strokes. After entering the
first two strokes of the desired
character, the component and
character candidates that started with
Using components is a fast method for
entering complex characters.
The smaller candidates surrounded by
dotted frames are components, and the
22
Getting started
This is an Internet version of this publication. © Print only for private use.
bigger candidates without dotted frames
are characters.
Number Key
Pinyin Letter
a b c
For example, to enter “ 信息”
d e f
1 Enter “ ”, “ ” and “ ”.
2 Move the cursor to “信”, press the
centre selection key.
g h i
3 Move the cursor to “息”, press the
centre selection key again to select
“ 息”.
j k l
m n o
p q r s
t u ü
Example of using the wild card key
The wild card key
, is used to
supplement unclear strokes in entering
characters. If you want to enter “互”,
but you only know that “ 一” is the first
and the last stroke of the character and
that the total number of strokes is four,
w x y z
On the keypad, the letter ü is replaced by
v.
enter
,
,
,
. The character
is displayed in the candidate row.
For example, to enter “ 信息”
Pinyin input
1 Press
,
,
.
Press the keys containing the required
Pinyin letters, and the phone will make
various proposals on the screen,
according to the pronunciation rules of
Mandarin.
2 When “xin” is highlighted, press or
and select “ 信”, then press the
centre selection key. (If you want to
enter any of the other suggested Pinyin
combinations, scroll up or down to the
desired combination, then press the
centre selection key.)
Below is the key mapping of Pinyin
letters on the keypad.
3 Press the centre selection key again to
select “ 息”, when “ 息” is highlighted.
23
Getting started
This is an Internet version of this publication. © Print only for private use.
Input punctuation, symbols and
smilies
Under any Chinese input mode, press
, to see the table of punctuation
Walkman™
You can listen to music, audio books
and podcasts. Use Sony Ericsson
Media Manager to transfer content to
and from your phone. For more
information, see Transferring content
to and from a computer on page
marks, symbols and smilies. Use the
navigation key to make a selection.
Press
to enter a space into the text.
32
.
Fuzzy Pinyin
Stereo portable handsfree
Fuzzy Pinyin is an option for the Pinyin
input method, which contains
additional spelling alternatives.
To turn Fuzzy Pinyin on
• When you write using Pinyin input,
select Options > Writing options > Fuzzy
Pinyin.
To use the handsfree
• Connect the portable handsfree. Music
stops when you receive a call and
resumes when the call has ended.
24
Walkman™
This is an Internet version of this publication. © Print only for private use.
• When music is playing, press and hold
down and move the phone to the
Walkman™ player
right with a flick of your wrist to go to
the next track. To go to the previous
track, use the same action to the left.
To play music
1 From standby select Menu > Media >
Music.
2 Browse by category using the
navigation key.
3 Scroll to a title and select Play.
To shuffle tracks
To stop playing music
• Press the centre selection key.
To fast forward and rewind
• Press and hold down or
.
To move between tracks
• Press or
.
To minimise the player
• When music is playing, press and hold
• Press
.
down
and shake your phone.
To return to the player
• Press
To change the volume
.
Shake control
To switch track
Walkman™
25
This is an Internet version of this publication. © Print only for private use.
1 When music is playing, hold the phone
To create a playlist
1 From standby select Menu > Media >
Music > Playlists.
2 Scroll to New playlist and select Add.
3 Enter a name and select OK.
4 For each track you want to add, scroll
to the track and select Mark.
5 Select Add to add the marked tracks to
the playlist.
out in front of you facing upwards.
2 Press and hold down
and bend
your arm upwards towards you to
increase the volume. To decrease the
volume, repeat the action in the
opposite direction.
Clear stereo and clear bass
Clear stereo and clear bass are turned
on when you set the equaliser
manually.
To add tracks to a playlist
1 From standby select Menu > Media >
Music > Playlists.
2 Select a playlist.
3 Scroll to Add music and select Add.
4 For each track you want to add, scroll
to the track and select Mark.
5 Select Add to add the marked tracks to
the playlist.
To turn on clear stereo and clear bass
using equaliser presets
1 When the phone is open, from standby
press
.
2 Select Options > Settings > Equaliser.
3 Select any of the presets, except
Normal.
SensMe™
Playlists
You can create playlists to organise
your music. You can add tracks to
more than one playlist.
Deleting a playlist, or a track from a
playlist, does not delete the track from
the memory, just the reference to the
track in that list.
It may take a few minutes for the phone to
create a playlist.
With SensMe™ you can create
playlists in two ways, by mood or from
all the tracks in your phone. By mood,
26
Walkman™
This is an Internet version of this publication. © Print only for private use.
you first use Sony Ericsson Media
Manager to analyse and transfer tracks
to your phone. Information such as
mood, tempo and chords is then
added. The tracks are displayed as
dots on a map with two axes. In the
All view, all the tracks in your phone are
placed randomly on the map. You can
create a playlist by selecting an area of
tracks.
5 To preview different tracks, press
or
6 To choose an area of tracks, select
Add and press or
7 To create the playlist and play it in the
Walkman™ player, select Create.
8 Select Options > Save playlist.
9 Enter a name and select OK.
,
,
.
.
Audio books
You can listen to audio books you have
transferred to your phone from a
computer using Sony Ericsson Media
Manager.
For information on how to analyse your
music, click in the top right corner of
the Sony Ericsson Media Manager
window.
It may take a few minutes before a
transferred audio book appears in the list
of available audio books.
To create a playlist by mood
1 From standby select Menu > Media >
Music > SensMe™ > Open.
2 Press
tracks.
,
,
or to preview different
To access audio books
• From standby select Menu > Media >
Music > Audio books.
3 Select Add and press or to choose
an area of tracks.
4 Select Create to create the playlist and
play it in the Walkman™ player.
5 Select Options > Save playlist.
6 Enter a name and select OK.
You can find audio books in formats
other than M4B and those that do not
have ID3v2 chapter tags in the Tracks
folder.
Buy Now
To create a playlist from All view
If you subscribe to a music service
allowing limited, non-permanent use
with your phone, you can mark a track
you are interested in buying later. The
next time you synchronise your music
1 Select Menu > Media > Music.
2 Scroll to SensMe™ and select Open.
3 Press
,
,
or
.
4 Make sure you are in All view. If you are
not, select All.
Walkman™
27
This is an Internet version of this publication. © Print only for private use.
This service is not available in all
countries/regions.
with Windows Media® Player on a
computer with enabled Internet
access, you should be asked if you
want to buy the track you marked
earlier. If you accept, the track is
downloaded to your computer and
your selected music service account is
charged. This service requires a
subscription and account with a
downloadable music service, a
computer with Microsoft® Windows
Media® Player 11 or subsequent
compatible version of Windows
Media® Player, and a USB computer
connection.
To use PlayNow™
1 From standby select Menu >
PlayNow™.
2 Scroll the PlayNow™ Web site and
follow the instructions to preview and
purchase content.
TrackID™
TrackID™ is a music recognition
service. You can search for title, artist
and album name for a track you hear
playing through a loudspeaker or on
the radio. If you cannot use TrackID™,
services on page 70.
You cannot see that a track is marked.
You cannot unmark tracks you have
already marked.
To search for track information
To mark a track
• When you hear a track through a
loudspeaker, from standby select
Menu > Entertainment > TrackID™ >
Start.
• When the radio is playing select
Options > TrackID™.
• When the track you want to mark is
playing, press and hold down
.
PlayNow™
You can connect to PlayNow™ to
download ringtones, games, music,
themes and wallpapers. You can
preview or listen to content before you
purchase and download it to your
phone. If you cannot use PlayNow™,
services on page 70.
For best results, use TrackID™ in a quiet
area.
Online music and video clips
You can view video clips and listen to
music by streaming them to your phone
Walkman™
28
This is an Internet version of this publication. © Print only for private use.
from the Internet. If you cannot use the
Internet, see I cannot use Internet-
based services on page 70.
To turn on the radio
1 Connect a handsfree to the phone.
2 Select Menu > Entertainment > Radio.
To select a data account for
streaming
1 From standby select Menu > Settings >
the Connectivity tab > Streaming
settings > Connect using:.
To search for channels automatically
• Select Search.
To search for channels manually
• Press or
.
2 Select the data account to use.
3 Select Save.
To change the volume
• Press the volume key up or down.
To stream music and video clips
1 From standby select Menu > Internet
Service.
2 Select Options > Go to > Bookmarks.
3 Select a link to stream from.
To minimise the radio
• Select Options > Minimise.
To return to the radio
• From standby select Menu >
Entertainment > Radio.
Video player
To play videos
Saving channels
You can save up to 20 preset channels.
1 From standby select Menu > Media >
Video > Videos.
2 Scroll to a title and select Play.
To save channels
1 When you have found a radio channel,
select Options > Save.
2 Scroll to a position and select Insert.
To stop playing videos
• Press the centre selection key.
Radio
To select saved channels
1 Select Options > Channels.
2 Select a radio channel.
Do not use your phone as a radio in places
where this is prohibited.
Walkman™
29
This is an Internet version of this publication. © Print only for private use.
To switch between saved channels
• Press or
To record a call
.
1 During an ongoing call, select Options
> Record.
2 Select Save to save the recording.
MusicDJ™
You can compose and edit your own
melodies to use as ringtones. Pre-
arranged sounds with different
characteristics are available.
To listen to a recording
1 From standby select Menu > Organiser
> File manager.
2 Scroll to Music and select Open.
3 Scroll to a recording and select Play.
To compose a melody
1 From standby select Menu >
Entertainment > MusicDJ™.
2 Select to Insert, Copy or Paste sounds.
3 Use
,
,
or to scroll between the
sounds.
4 Select Options > Save melody.
Record sound
You can record a voice memo or a call.
Recorded sounds can also be set as
ringtones.
In some countries/regions or states it is
required by law that you inform the other
person before recording the call.
To record a sound
• From standby select Menu >
Entertainment > Record sound >
Record.
Walkman™
30
This is an Internet version of this publication. © Print only for private use.
To move items between the phone
memory and the memory card
1 From standby select Menu > Organiser
> File manager.
2 Find an item and select Options >
Manage file > Move.
3 Select Memory card or Phone.
4 Scroll to a folder and select Open.
5 Select Paste.
Transferring and
handling content
You can transfer and handle content
such as pictures and music.
You are not allowed to exchange some
copyright-protected material. identifies
a protected item.
Handling content in the phone
To view information about content
1 From standby select Menu > Organiser
> File manager.
2 Find an item and select Options >
Information.
You can use File manager to handle
content saved in the phone memory or
on a memory card. Tabs and icons in
File manager show where the content is
saved. If the memory is full, delete
some content to create space.
Sending content to another
phone
To view memory status
You can send content, for example, in
messages or using Bluetooth™
wireless technology.
1 From standby select Menu > Organiser
> File manager.
2 Select Options > Memory status.
3 Select Memory card or Phone.
To send content
To select more than one item in a
folder
1 From standby select Menu > Organiser
> File manager.
2 Scroll to a folder and select Open.
3 Select Options > Mark > Mark several.
4 For each item you want to mark, scroll
to the item and select Mark.
1 Scroll to an item and select Options >
Send.
2 Select a transfer method.
Make sure the receiving device supports
the transfer method you select.
Transferring and handling content
This is an Internet version of this publication. © Print only for private use.
31
3 Click Install Sony Ericsson Media
Manager and follow the instructions.
Transferring content to and
from a computer
To transfer content using Sony
Ericsson Media Manager
1 Connect the phone to a computer with
a USB cable supported by your phone.
2 Computer: Start/Programs/
Sony Ericsson/Sony Ericsson Media
Manager.
3 Phone: Select Media transfer.
4 Computer: Select Portable device and
click OK.
5 Wait until the phone appears in
Sony Ericsson Media Manager.
6 Move files between your phone and the
computer in Sony Ericsson Media
Manager.
You can use Sony Ericsson Media
Manager to transfer content between
your phone and a computer.
Sony Ericsson Media Manager software
is included on the CD that comes with
your phone and available for download at
When you move or copy content from
a computer to your phone
unrecognised content is saved in the
Other folder in File manager.
Required operating systems
You need one of these operating
systems to use the software included
on the CD:
Do not remove the USB cable from your
phone or computer during transfer, as this
may corrupt the memory card or the
phone memory.
• Microsoft® Windows Vista™ (32 bit
and 64 bit versions of: Ultimate,
Enterprise, Business, Home
Premium, Home Basic)
• Microsoft® Windows XP (Pro or
Home), Service Pack 2 or higher
For details on transferring music, click
in the top right corner of the
Sony Ericsson Media Manager window.
Using the USB cable
To install Sony Ericsson Media
Manager
You can connect your phone to a
computer with the USB cable to
synchronise, transfer and back up
phone content and use your phone as
a modem. For more information, go to
1 Turn on your computer and insert the
CD. The CD starts automatically and
the installation window opens.
2 Select a language and click OK.
32
Transferring and handling content
This is an Internet version of this publication. © Print only for private use.
read Feature guides.
To drag and drop content
1 Connect your phone to a computer
using a USB cable.
2 Phone: Select Media transfer. The
phone will remain activated during file
transfer.
3 Computer: Wait until the phone
memory and memory card appear as
external disks in Windows Explorer.
4 Drag and drop selected files between
the phone and the computer.
Phone name
Before using the USB cable
You can enter a name for your phone
that is shown to other devices when
using, for example, Bluetooth™
wireless technology.
page
.
32
Only use a USB cable supported by your
phone. Do not remove the USB cable
from your phone or computer during
transfer as this may corrupt the memory
card or the phone memory.
To enter a phone name
1 From standby select Menu > Settings >
the Connectivity tab > Phone name.
2 Enter the phone name and select OK.
To disconnect the USB cable safely
1 Computer: Close any software that you
are using with your phone.
Using Bluetooth™ wireless
technology
The Bluetooth function makes wireless
connection to other Bluetooth devices
possible. You can, for example:
2 Disconnect the USB cable.
Drag and drop content
You can drag and drop content
between your phone, a memory card
and a computer in Microsoft Windows
Explorer.
• Connect to handsfree devices.
• Connect to several devices at the
same time.
Transferring and handling content
This is an Internet version of this publication. © Print only for private use.
33
• Connect to computers and access
the Internet.
4 Enter a passcode, if required.
To allow connection to the phone
• Exchange items.
1 From standby select Menu > Settings >
the Connectivity tab > Bluetooth > My
devices.
2 Select a device from the list.
3 Select Options > Allow connection.
4 Select Always ask or Always allow.
• Play multiplayer games.
A range within 10 metres (33 feet), with no
solid objects in between, is
recommended for Bluetooth
communication.
Before using Bluetooth wireless
technology
This is only possible with devices that
require access to a secure service.
You must turn on the Bluetooth
To pair the phone with a Bluetooth
handsfree for the first time
1 From standby select Menu > Settings >
the Connectivity tab > Bluetooth >
Handsfree.
function to communicate with other
devices. You may also have to pair your
phone with other Bluetooth devices.
To turn on the Bluetooth function
• From standby select Menu > Settings >
the Connectivity tab > Bluetooth > Turn
on.
2 Scroll to a device and select Yes.
3 Enter a passcode, if required.
Power saving
Make sure that the device you want to pair
your phone with has the Bluetooth
function activated and Bluetooth visibility
turned on.
You can save battery power with the
Power save function. In Power save
mode you can only connect with a
single Bluetooth device. If you want to
connect with more than one Bluetooth
device at the same time you must turn
this function off.
To pair the phone with a device
1 From standby select Menu > Settings >
the Connectivity tab > Bluetooth > My
devices.
2 Scroll to New device and select Add to
search for available devices.
3 Select a device.
34
Transferring and handling content
This is an Internet version of this publication. © Print only for private use.
To turn on powersave
Before backing up and restoring, you
need to install the Sony Ericsson PC
Suite and the Sony Ericsson Media
Manager.
• From standby select Menu > Settings >
the Connectivity tab > Bluetooth >
Power save > On.
You can backup and restore contacts
within your phone using a Memory
Stick Micro™ (M2™) memory card.
You can move content between the
memory card and the phone memory.
Transferring sound to and from a
Bluetooth handsfree
You can transfer the sound to and from
a Bluetooth handsfree using a phone
key or the handsfree key.
page
.
31
To transfer sound
Back up your phone content regularly to
make sure you do not lose it.
1 From standby select Menu > Settings >
the Connectivity tab > Bluetooth >
Handsfree > Incoming call.
2 Select an option. In phone transfers
sound to the phone. In handsfree
transfers sound to the handsfree.
To make a backup using the
Sony Ericsson PC Suite
1 Computer: Start the Sony Ericsson PC
Suite from Start/Programs/
Sony Ericsson/Sony Ericsson PC
Suite.
2 Follow the instructions in the
Sony Ericsson PC Suite for how to
connect.
3 Phone: Select Phone mode.
4 Computer: Go to the backup and
restore section in the Sony Ericsson PC
Suite and make a backup.
To transfer sound during a call
1 During a call, select Sound.
2 Select from the list.
Backing up and restoring
You can backup and restore contacts,
the calendar, tasks, notes and
bookmarks using the Sony Ericsson PC
Suite. You can backup and restore
content such as music, pictures and
video clips using the Sony Ericsson
Media Manager
To restore phone content using the
Sony Ericsson PC Suite
The Sony Ericsson PC Suite will overwrite
all the phone content during the restore
Transferring and handling content
This is an Internet version of this publication. © Print only for private use.
35
process. You may damage your phone if
you interrupt the process.
To restore phone content using the
Sony Ericsson Media Manager
The Sony Ericsson Media Manager will
compare your phone content with your
computer backup and then restore files
missing in your phone. You may damage
your phone if you interrupt the process.
1 Computer: Start the Sony Ericsson PC
Suite from Start/Programs/
Sony Ericsson/Sony Ericsson PC
Suite.
2 Follow the instructions in the
Sony Ericsson PC Suite for how to
connect.
3 Phone: Select Phone mode.
4 Computer: Go to the backup and
restore section in the Sony Ericsson PC
Suite and restore your phone.
1 Connect your phone to the computer.
2 Phone: Select Media transfer mode.
3 Computer: Start Sony Ericsson Media
Manager from Start/Programs/
Sony Ericsson/Sony Ericsson Media
Manager.
4 Go to the backup section in the
Sony Ericsson Media Manager.
5 Select the files you want to restore and
restore them.
To make a backup using the Sony
Ericsson Media Manager
1 Connect your phone to the computer
using a USB cable.
2 Phone: Select Media transfer mode.
3 Computer: Start Sony Ericsson Media
Manager from Start/Programs/
Sony Ericsson/Sony Ericsson Media
Manager.
For more information on backing up and
restoring in Sony Ericsson Media
Manager see the Sony Ericsson Media
Manager Feature guide at
4 Go to the backup section in the
Sony Ericsson Media Manager.
5 Select the files you want to back up and
make a backup.
You can also connect your phone to a
computer using Bluetooth.
Transferring and handling content
36
This is an Internet version of this publication. © Print only for private use.
Do not hold your phone to your ear when
waiting. When the call connects, your
phone gives a loud signal.
Calling
Making and receiving calls
You need to turn on your phone and be
within range of a network.
To answer a call
• Press
.
To reject a call
To make a call
• Press
.
1 From standby enter a phone number
(with international country/region code
and area code, if applicable).
To change the ear speaker volume
during a call
• Press the volume key up or down.
2 Press
.
You can call numbers from your contacts
,
To mute the microphone during a call
39
38
1 Press and hold down
2 Press and hold down
resume.
.
again to
control on page
.
43
To end a call
To turn on the loudspeaker during a
call
• Press
.
• Press SpkrOn.
To make international calls
Do not hold your phone to your ear when
using the loudspeaker. This could
damage your hearing.
1 From standby press and hold down
until a “+” sign appears.
2 Enter the country/region code, area
code (without the first zero) and phone
number.
To view missed calls from standby
• Press
to open the call list.
3 Press
.
Networks
To re-dial a number
Your phone switches automatically
between GSM and 3G (UMTS)
networks depending on availability.
• When Retry? appears select Yes.
Calling
37
This is an Internet version of this publication. © Print only for private use.
Some network operators allow you to
switch networks manually.
2 Scroll to New contact and select
Options > Special numbers >
Emergency nos..
To switch networks manually
Video call
1 From standby select Menu > Settings >
the Connectivity tab > Mobile networks
> GSM/3G networks.
You can share experiences with friends
and family as they happen or save them
to share later. You see the person you
are talking to on your screen. The other
person sees you or what is on your
camera.
2 Select an option.
Emergency calls
Your phone supports international
emergency numbers, for example, 112
and 911. You can normally use these
numbers to make emergency calls in
any country/region, with or without the
SIM card inserted, if you are within
range of a network.
Before making video calls
3G (UMTS) service is available when
appears. To make a video call, both
parties on the call must have a 3G
(UMTS) phone subscription that
supports 3G (UMTS) service and 3G
(UMTS) coverage.
In some countries/regions, other
emergency numbers may also be
promoted. Your network operator may
therefore have saved additional local
emergency numbers on the SIM card.
To use the zoom with an outgoing
video call
• Press or
.
To make an emergency call
• From standby enter 112 (the
To view video call options
• During the call, select Options.
international emergency number) and
press
.
Call list
To view your local emergency
numbers
You can view information about recent
calls.
1 From standby select Menu > Contacts.
38
Calling
This is an Internet version of this publication. © Print only for private use.
To call a number from the call list
Phone contacts
1 From standby press
and scroll to a
Phone contacts can contain names,
phone numbers and personal
information. They are saved in the
phone memory.
tab.
2 Scroll to a name or a number and press
.
To add a phone contact
Contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Scroll to New number: and select Add.
5 Enter the number and select OK.
6 Select a number option.
7 Scroll between the tabs and add
information to the fields.
8 Select Save.
You can save names, phone numbers
and personal information in Contacts.
Information can be saved in the phone
memory or on the SIM card.
You can synchronise your contacts using
the Sony Ericsson PC Suite.
Please add the area code when you save
fixed line numbers in your phone.
Calling contacts
Default contacts
You can choose which contact
information is shown as default. If
Phone contacts is selected as default,
your contacts show all the information
saved in Contacts. If you select SIM
contacts as default, your contacts
show names and numbers saved on
the SIM card.
To call a contact written in Chinese
characters
1 From standby select Menu > Contacts.
Enter the entire multi-letter name, pure
initial or mixed initial Pinyin of Chinese
contacts you want to call.
2 When the contact is highlighted, press
or to select a number. Press
.
To select default contacts
To call a contact written in Latin
characters
1 From standby select Menu > Contacts.
Scroll to, or enter, the first letters or all
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Default contacts.
3 Select an option.
Calling
39
This is an Internet version of this publication. © Print only for private use.
letters of the contact you want to call (a
maximum of 10 letters).
Editing contacts
To add information to a phone
contact
2 When the contact is highlighted, press
or to select a number. Press
.
1 From standby select Menu > Contacts.
2 Scroll to a contact and select Options >
Edit contact.
3 Scroll between the tabs and select
Add or Edit.
4 Select an option and an item to add or
edit.
5 Select Save.
Your phone supports Chinese and
English contacts mixed search. When a
contact is written in Latin characters, the
entered letter can reach the Latin contact
you want to call; when a contact is written
in Chinese characters, the entered letter
can reach the Pinyin of the Chinese
contact you want to call.
If your subscription supports Calling Line
Identification (CLI) service, you can
assign personal ringtones and pictures to
contacts.
To go directly to the contacts list
• From standby press and hold down
–
.
To call with Smart search
1 From standby press
To copy names and numbers to
phone contacts
–
to enter
a sequence of (at least two) digits. All
entries which match the sequence of
digits or corresponding letters are
shown in a list.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy from SIM.
3 Select an option.
2 Scroll to a contact or a phone number
To copy names and numbers to the
SIM card
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Copy to SIM.
and press
.
To turn on or off Smart search
1 From standby select Menu > Settings >
the Calls tab > Smart search.
2 Select an option.
40
Calling
This is an Internet version of this publication. © Print only for private use.
3 Select an option.
Deleting contacts
When you copy all contacts from your
phone to the SIM card, all existing SIM
card information is replaced.
To delete all contacts
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Delete all
contacts.
To automatically save names and
phone numbers on the SIM card
3 Select an option.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Auto save on
SIM.
Contact memory status
The number of contacts you can save
in your phone or on the SIM card
depends on available memory.
3 Select an option.
To save contacts on a memory card
To view contact memory status
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Back up to m.
card.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Advanced > Memory status.
Myself
SIM contacts
You can enter information about
yourself and, for example, send your
business card.
SIM contacts can contain names and
numbers only. They are saved on the
SIM card.
To enter Myself information
To add a SIM contact
1 From standby select Menu > Contacts.
2 Scroll to Myself and select Open.
3 Scroll to an option and edit the
information.
1 From standby select Menu > Contacts.
2 Scroll to New contact and select Add.
3 Enter the name and select OK.
4 Enter the number and select OK.
5 Select a number option and add more
information, if available.
4 Select Save.
To add your own business card
1 From standby select Menu > Contacts.
6 Select Save.
Calling
41
This is an Internet version of this publication. © Print only for private use.
2 Scroll to Myself and select Open.
3 Scroll to My contact info and select
Add > Create new.
4 Scroll between the tabs and add
information to the fields.
5 Enter the information and select Save.
Speed dial
Speed dialling lets you select nine
contacts that you can dial quickly from
standby. The contacts can be saved in
positions 1-9.
To add contacts to speed dial
numbers
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Speed dial.
3 Scroll to a position number and select
Add.
4 Select a contact.
Groups
You can create a group of phone
numbers and email addresses from
Phone contacts to send messages to.
46
also use groups (with phone numbers)
when you create accepted callers lists.
.
45
To speed dial
To create a group of numbers and
email addresses
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Groups.
• From standby enter the position
number and press
.
More calling features
3 Scroll to New group and select Add.
4 Enter a name for the group and select
Continue.
Voicemail
If your subscription includes an
answering service, callers can leave a
voicemail message when you cannot
answer a call.
5 Scroll to New and select Add.
6 For each contact phone number or
email address you want to mark, scroll
to it and select Mark.
To enter your voicemail number
7 Select Continue > Done.
1 From standby select Menu >
Messaging > Messages > Settings > the
Message settings tab > Voicemail
number.
42
Calling
This is an Internet version of this publication. © Print only for private use.
Voice commands are saved in the phone
memory only. They cannot be used in
another phone.
2 Enter the number and select OK.
To call your voicemail service
• From standby press and hold down
To voice dial
.
1 From standby press and hold down a
volume key.
Voice control
2 Wait for the tone and say a recorded
name, for example “John mobile.” The
phone plays the name back to you and
connects the call.
By creating voice commands you can:
• Voice dial – call someone by saying
their name
• Answer and reject calls when you
use a handsfree
Diverting calls
You can divert calls, for example, to an
answering service.
To record a voice command using
voice dialling
When Restrict calls is used, some divert
call options are not available. See
1 From standby select Menu > Settings >
the General tab > Voice control > Voice
dialling > Activate.
.
45
2 Select Yes > New voice command and
select a contact. If the contact has
more than one number, select the
number to add the voice command to.
3 Record a voice command such as
“John mobile.”
4 Follow the instructions that appear.
Wait for the tone and say the command
to record. The voice command is
played back to you.
To divert calls
1 From standby select Menu > Settings >
the Calls tab > Divert calls.
2 Select a call type and a divert option.
3 Select Activate.
4 Enter the number to divert calls to and
select OK.
More than one call
You can handle more than one call at a
time. For example, you can put an
ongoing call on hold, while you make or
answer a second call. You can also
switch between the two calls. You
5 If the recording sounds OK, select Yes.
If not, select No and repeat steps 3 and
4.
Calling
43
This is an Internet version of this publication. © Print only for private use.
cannot answer a third call without
ending one of the first two calls.
Handling two voice calls
You can have calls ongoing and on
hold at the same time.
Call waiting
To switch between two calls
You will hear a beep if you receive a
second call while call waiting is active.
• During the call, press
.
To activate call waiting
To join two calls
• From standby select Menu > Settings >
the Calls tab > Manage calls > Call
waiting > Activate.
• During the call, select Options > Join
calls.
To end an ongoing call and return to
the call on hold
To make a second call
1 During the call, press
. This puts the
• First press
and then
.
ongoing call on hold.
Conference calls
2 Select Options > Add call.
3 Enter the number to call and press
With a conference call, you can have a
joint conversation with up to five
people.
.
To answer a second call
To add a new participant
• During the call, press
. This puts the
ongoing call on hold.
1 During the call, press
joined calls on hold.
. This puts the
To reject a second call
• During the call, press
with the ongoing call.
2 Select Options > Add call.
3 Enter the number to call and press
.
and continue
4 Select Options > Join calls to add the
new participant.
5 Repeat this task to add more
participants.
To end an ongoing call and answer a
second call
• During the call, select Replace active
call.
To release a participant
1 Select Options > Release party.
44
Calling
This is an Internet version of this publication. © Print only for private use.
2 Select the participant to release.
To accept all calls
• From standby select Menu > Settings >
the Calls tab > Manage calls > Accept
calls > All callers.
To have a private conversation
1 During the call, select Options > Talk
to and select the participant to talk to.
2 To resume the conference call, select
Options > Join calls.
Restricted dialling
You can restrict outgoing and incoming
calls. A password from your service
provider is required.
My numbers
You can view, add and edit your own
phone numbers.
If you divert incoming calls, you cannot
use some restrict calls options.
To check your phone numbers
Restrict calls options
Standard options are:
1 From standby select Menu > Contacts.
2 Scroll to New contact and select
Options > Special numbers > My
numbers.
• All outgoing – all outgoing calls
• Outgoing intl – all outgoing
international calls
3 Select an option.
• Outgoing intl roam. – all outgoing
international calls except to your
home country/region
• All incoming – all incoming calls
• Inc. when roaming – all incoming calls
when you are abroad
Accept calls
You can choose to receive calls from
certain phone numbers only.
To add numbers to the accepted
callers list
1 From standby select Menu > Settings >
the Calls tab > Manage calls > Accept
calls > Only from list.
2 Scroll to New and select Add.
3 Select a contact or Groups.
To restrict calls
1 From standby select Menu > Settings >
the Calls tab > Manage calls > Restrict
calls.
2 Select an option.
3 Select Activate.
4 Enter your password and select OK.
Calling
45
This is an Internet version of this publication. © Print only for private use.
Call time and cost
Messaging
During a call, the phone shows how
long you have been talking. You can
also check on the duration of your last
call, your outgoing calls and the total
time of all your calls.
Text and picture messages
Messages can contain text, pictures,
sound effects, animations, and
melodies. You can also create and use
templates for your messages.
To check the call time
• From standby select Menu > Settings >
the Calls tab > Time & cost > Call
timers.
When sending messages, the phone
automatically selects the most suitable
method (as a text or picture message)
for sending the message.
Showing or hiding your phone number
If you cannot use picture messages,
services on page 70.
You can decide to show or hide your
phone number when you make a call.
To hide your phone number
Sending messages
You can send messages from your
phone.
1 From standby select Menu > Settings >
the Calls tab > Show/hide my no..
2 Select Hide number.
To create and send a message
1 From standby select Menu >
Messaging > Write new > Message.
2 Enter text. To add items to the
message, press , scroll and select
an item.
3 Select Continue > Contacts look-up.
4 Select a recipient and select Send.
If you send a message to a group, you
will be charged for each member. See
46
Messaging
This is an Internet version of this publication. © Print only for private use.
To copy and paste text in a message
Templates
1 When you write the message, select
Options > Copy & paste.
2 Select Copy all or Mark & copy. Scroll to
and mark text in the message.
3 Select Options > Copy & paste > Paste.
If you often use the same phrases and
pictures in a message, you can save
the message as a template.
To add a message template
1 Select Menu > Messaging > Messages
> Templates > New template > Add.
2 Enter text. To add items to the
message, press , scroll and select
an item.
Receiving and saving messages
You are notified when you receive a
message. Messages are automatically
saved in the phone memory. When the
phone memory is full, you can delete
messages or save them on a memory
card or on the SIM card.
3 Select Save.
4 Enter a title and select OK.
To save a message as a template
To save an incoming message on a
memory card
1 From standby select Menu >
Messaging > Inbox.
2 Scroll to the message and select View
> Options > Save as template.
• Select Menu > Messaging > Messages
> Settings > Save to > Memory card.
To save a message on the SIM card
Message options
1 Select Menu > Messaging > Messages
and select a folder.
2 Scroll to a message and select
Options > Save message.
You can set some options, such as the
Message alert and default storage
location, to apply to all messages. You
can set other options, such as the
Delivery priority and Delivery time, for
each message you send.
To view a message from the inbox
1 Select Menu > Messaging > Inbox.
2 Scroll to the message and select View.
To set options for all messages
1 From standby select Menu >
Messaging > Messages > Settings.
2 Scroll to an option and choose Select.
To call a number in a message
• When you view the message, scroll to
the phone number and press
.
Messaging
47
This is an Internet version of this publication. © Print only for private use.
To set options for a specific message
account or you can enter them
manually. You can also receive settings
1 When the message is ready and a
recipient is selected, select Options >
Advanced.
To create an email account
1 To start the setup wizard, select Menu
> Messaging > Email.
2 Follow the instructions to create the
account.
2 Scroll to an option and select Edit.
Voice messages
You can send and receive a sound
recording as a voice message.
If you enter settings manually, you can
contact your email provider for more
information. An email provider could be
the company that supplied your email
address.
The sender and recipient must have a
subscription supporting picture
messaging.
To record and send a voice message
1 From standby select Menu >
Messaging > Write new > Voice
message.
2 Record the message and select Stop >
Send > Contacts look-up.
3 Select a recipient and select Send.
To write and send an email message
1 From standby select Menu >
Messaging > Email > Write new.
2 Select Add > Enter email address. Enter
the email address and select OK.
3 To add more recipients, scroll to To:
and select Edit.
4 Scroll to an option and select Add >
Enter email address. Enter the email
address and select OK. When you are
ready, select Done.
Email
You can use standard email functions
and your computer email address in
your phone.
5 Select Edit and enter a subject. Select
OK.
6 Select Edit and enter the text. Select
OK.
You can synchronise your email using
Microsoft® Exchange ActiveSync®.
Before using email
7 Select Add and choose a file to attach.
8 Select Continue > Send.
You can use the setup wizard to check
if settings are available for your email
48
Messaging
This is an Internet version of this publication. © Print only for private use.
To receive and read an email
message
Active email account
If you have several email accounts, you
can change which one is active.
1 From standby select Menu >
Messaging > Email > Inbox > Options >
Check new email.
To change the active email account
1 From standby select Menu >
Messaging > Email > Accounts.
2 Select an account.
2 Scroll to the message and select View.
To save an email message
1 From standby select Menu >
Messaging > Email > Inbox.
2 Scroll to the message and select View
> Options > Save message.
Push email
You can receive notification in your
phone from your email server that you
have new email messages.
To reply to an email message
To turn on push email notification
1 From standby select Menu >
Messaging > Email > Inbox.
2 Scroll to the message and select
Options > Reply.
•
From standby select Menu >
Messaging > Email > Settings > Push
email.
3 Write the reply and select OK.
4 Select Continue > Send.
To view an attachment in an email
message
• When you view the message, select
Options > Attachments > Use > View.
Messaging
49
This is an Internet version of this publication. © Print only for private use.
Imaging
You can take photos and record video
clips to view, save or send. You find
saved photos and video clips in Media
and in File manager.
Using the camera
1
2
1
2
Take photos/Record video
Zoom in or out
To activate the camera
• From standby press
.
To take a photo
1 Activate the camera and press the
navigation key to scroll to
.
50
Imaging
This is an Internet version of this publication. © Print only for private use.
2 Press
to take a photo. The photo is
More camera features
automatically saved.
To change settings
• Activate the camera and select
To record a video clip
1 Activate the camera and press the
navigation key to scroll to
2 Press
fully down to start recording.
3 To stop recording, press
fully
down. The video clip is automatically
saved.
.
To view information about settings
• Scroll to a setting and select
.
.
To improve a photo with Photo fix
1 Activate the camera and press the
navigation key to scroll to
.
To use zoom
• Press the volume key.
2 Make sure Review is set to On. Select
> Settings and scroll to Review > On.
3 Take a photo.
When taking a photo, zoom is available
only in VGA mode.
4 During review, select Options > Photo
fix.
To adjust brightness
• Press the navigation key. The amount
Viewing and tagging photos
of brightness is shown beside the
.
To view photos in a slide show
To view photos
1 Activate the camera and press the
navigation key to scroll to
2 Scroll through the photos.
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Select Options > Slide show.
5 Select a mood.
.
To view video clips
1 Activate the camera and press the
navigation key to scroll to
.
Viewing photos on a map
2 Scroll to a video clip and press the
When appears on the screen, your
geographical position is saved with the
photos you take. This is called geo
centre selection key.
Imaging
51
This is an Internet version of this publication. © Print only for private use.
tagging, and it shows the approximate
location of where a photo was taken.
To tag photos
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Press and scroll to a tag.
5 Select Options > Tag this photo.
6 For each photo you want to tag, scroll
to the photo and select Options > Tag
this photo.
To view photos on a map
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Select Options > View on map.
To change the geo tagging setting
1 Activate the camera and press the
Using photos
You can add a photo to a contact, use
it during phone startup, as a wallpaper
in standby or as a screen saver.
navigation key to scroll to
.
2 Select > Settings > Add position.
3 Select an option.
Photo tags
To use photos
You can tag photos to categorise them
in Photo tags. For example, you can
create a tag called vacation and add it
to all your vacation photos.
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Select Options > Use as.
5 Select an option.
To create a new photo tag
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Press and select Options > New tag.
5 Enter a name and select OK.
6 Select an icon.
7 To tag the photo, select Options > Tag
this photo.
To set a Java™ application as a
wallpaper
1 From standby select Menu > Settings >
the Display tab.
2 Select Wallpaper > Application.
3 Select a Java application.
You can only see the Java applications
that have support for wallpaper.
52
Imaging
This is an Internet version of this publication. © Print only for private use.
To trim a video clip
Working with photos
1 From standby select Menu > Organiser
> File manager > Videos.
2 Scroll to a video clip and select
Options > Edit in VideoDJ™ > Edit >
Trim.
3 Select OK > Set > Start to set the
starting point.
4 Select Set > End to set the ending
point.
5 Select Trim > Options > Save.
You can view, enhance and organise
your photos and video clips on your
computer by installing the Adobe™
Photoshop™ Album Starter Edition. It
is included on the CD that comes with
your phone and available for download
Use Sony Ericsson Media Manager to
transfer content to and from your
phone. For more information, see
Printing photos
You can print photos using the USB
cable connected to a compatible
printer.
computer on page
.
32
PhotoDJ™ and VideoDJ™
You can edit photos and video clips.
You can also print using a Bluetooth
compatible printer that supports the
Object Push Profile.
To edit and save a photo
1 From standby select Menu > Media >
Photo > Camera album.
2 Select a month.
3 Scroll to a photo and select View.
4 Select Options > Edit in PhotoDJ™.
5 Edit the photo.
To print photos using a USB cable
1 Connect a USB cable to the phone.
2 Connect the USB cable to the printer.
3 Wait for feedback in the phone and
select OK.
4 Enter printer settings (if required) and
select Print.
5 Select Menu > Media > Photo > Camera
album.
6 Select a month.
To edit and save a video clip
1 From standby select Menu > Organiser
> File manager > Videos.
2 Scroll to a video clip and select
Options > Edit in VideoDJ™.
3 Edit the video clip.
4 Select Options > Save.
Imaging
53
This is an Internet version of this publication. © Print only for private use.
7 Scroll to a photo and select Options >
Print.
Internet
If you cannot use the Internet, see I
page 70.
You should disconnect and re-connect
the USB cable if there is a printer error.
To start browsing
1 Select Search.
2 Enter a Web address, a search phrase
or the name of a bookmark.
3 Scroll to an item in the list and select
Go to or Search.
To exit the browser
• When you browse the Internet, select
Options > Exit browser.
Bookmarks
You can create and edit bookmarks as
quick links to your favourite Web
pages.
To create a bookmark
1 When you browse the Internet, select
Options > Tools > Add bookmark.
2 Enter a title and an address. Select
Save.
To select a bookmark
1 From standby select Menu > Internet
Service.
2 Select Options > Go to > Bookmarks.
3 Scroll to a bookmark and select Go to.
54
Internet
This is an Internet version of this publication. © Print only for private use.
To save a picture from a Web page
History pages
You can view Web pages you have
browsed.
1 When you browse the Internet, select
Options > Tools > Save picture.
2 Select a picture.
To view history pages
• From standby select Menu > Internet
Service > Options > Go to > History.
To find text on a Web page
1 When you browse the Internet, select
Options > Tools > Find on page.
2 Enter text and press Find.
More browser features
To send a link
To use pan and zoom on a Web page
1 When you browse the Internet, select
Options > Tools > Send link.
1 When you browse the Internet, press
.
2 Select a transfer method.
2 Use the navigation key to move the
frame.
Make sure the receiving device supports
the transfer method you select.
3 Press Zoom.
4 To switch back to pan, press
.
Internet keypad shortcuts
You can use the keypad to go directly
to an Internet browser function.
To use pan and zoom, Smart-Fit must be
turned off.
To turn on or off Smart-Fit
Rendering™
Key
Shortcut
1 From standby select Menu > Internet
Service > Options > Advanced > Smart-
Fit.
Bookmarks
-
Enter text to Enter address,
Search Internet or search in
Bookmarks
2 Select an option.
To make a call when you browse
• Press
.
Zoom
Pan & zoom (when Smart-Fit
is off)
Internet
55
This is an Internet version of this publication. © Print only for private use.
To select Internet keypad shortcuts
3 Select Continue.
1 From standby select Menu > Internet
Service.
2 Select Options > Advanced > Keypad
mode > Shortcuts.
To search for Web feeds
1 Select Menu > Media > Web feeds.
2 Select New feed and enter a Web
address.
Internet security and
certificates
Your phone supports secure browsing.
Certain Internet services, such as
banking, require certificates in your
phone. Your phone may already
To download content via Web feeds
1 Select Menu > Media > Web feeds.
2 Scroll to an updated feed and select
View or
.
3 Select a heading to expand.
4 Select an icon depending on content,
to open a Web page, to download
an audio podcast, to download a
video podcast or to download a
photo.
contain certificates when you buy it or
you can download new certificates.
To view certificates in the phone
• From standby select Menu > Settings >
the General tab > Security >
Certificates.
You can also subscribe to and download
content to a computer via feeds using
Media Go™. You can then transfer the
content to your phone.
Web feeds
Updating Web feeds
You can subscribe to and download
frequently updated content, such as
news, podcasts or photos, using Web
feeds.
You can manually update your feeds,
or schedule updates. When there are
updates, appears on the screen.
To add new feeds for a Web page
To schedule Web feed updates
1 When you browse a page on the
Internet that has Web feeds, indicated
by , select Options > Web feeds.
2 For each feed you want to add, scroll
to the feed and select Mark.
1
From standby select Menu > Media >
Web feeds.
2 Scroll to a feed and select Options >
Schedule update.
56
Internet
This is an Internet version of this publication. © Print only for private use.
3 Select an option.
To access video podcasts
• From standby select Menu > Media >
Video > Podcasts.
Frequent updates may be costly.
Web feeds in standby
You can show news updates on the
standby screen.
To show Web feeds in standby
1 From standby select Menu > Media >
Web feeds.
2 Scroll to a feed and select Options >
Settings > Standby ticker > Show in
standby.
To access Web feeds from standby
1 From standby select Ticker.
2 To read more about a feed, press or
to scroll to a headline and select Go
to.
Podcasts
Podcasts are files, for example, radio
programmes or video content, that you
can download and play. You subscribe
to and download podcasts using Web
feeds.
To access audio podcasts
• From standby select Menu > Media >
Music > Podcasts.
Internet
57
This is an Internet version of this publication. © Print only for private use.
More GPS features
GPS
Your phone has a GPS receiver that
uses satellite signals to calculate your
location.
Save locations
You can find all saved locations in My
favourites.
If you cannot use some GPS features, see
page 70.
To save your current location
1 From standby select Menu > Location
services > My favourites > Add new
place.
2 Select Edit and enter the title. Select
OK.
Using GPS
Your location can be found when you
have a clear view of the sky. If your
location is not found after a few
minutes, move to another location. To
help the search, stand still and do not
cover the GPS antenna.
3 Scroll to Description: and select Add.
Enter the description and select OK.
4 Scroll to Position: and select Add >
Current position.
5 Select Save.
The first time you use the GPS it may take
up to 10 minutes before your location is
found.
To view a saved location on a map
1 From standby select Menu > Location
services > My favourites.
2 Scroll to a location and select Go to.
Location requests
External services may ask for your
location.
To change access for external
services
1 Select Menu > Location services >
Settings > Privacy.
2 Select an option.
58
GPS
This is an Internet version of this publication. © Print only for private use.
Turn off GPS
To start a training session
The GPS receiver turns off
1 Select Menu > Location services >
Tracker > Start training.
automatically when it is not in use. You
can also turn the GPS receiver off
manually. This saves battery power
when you use features that do not
require the GPS receiver to find your
location.
2 Select a training type.
3 Scroll to an item, select Edit and enter
the data.
4 To save, select Done.
5 To start training, select Start.
To turn on or off GPS manually
To compare results during training
1 Select Menu > Location services >
Settings.
2 Select Enable GPS or Disable GPS.
1 Select Menu > Location services >
Tracker > Start training.
2 Select Route based.
3 Scroll to Route:, select Edit and select
a route.
4 Scroll to Live compare and select Edit.
5 Scroll to the result you want to
compare with and select Compare.
6 Select Done and then Start.
Tracker
Tracker is a GPS-based sports
application which allows you to keep
track of your speed, distance, route
and energy consumption during
training. You can base the training on
how long time you want to train or on
what distance you want to cover. You
can also base it on a previous training
route which has GPS data.
A GPS location is required before results
can be compared. For more information,
To end a training session manually
• During a training session, select
Information provided by use of the
Tracker application is approximate. Sony
Ericsson makes no warranty of any kind
with respect to the accuracy of the
Tracker application. Any serious health
and fitness concerns should be referred
to a health care professional.
Pause > End.
Results
The training result is shown after a
session is ended. You can view past
results anytime, and compare them if
they have GPS data.
GPS
59
This is an Internet version of this publication. © Print only for private use.
To compare results
1 Select Menu> Location services >
Tracker > Results.
2 Scroll to a result and select Options >
Compare.
3 Select a result to compare with.
Synchronising
You can synchronise in two different
ways. You can synchronise your phone
using a computer program or you can
synchronise using an Internet service.
Use only one of the synchronisation
methods at a time with your phone.
A GPS location is required before results
can be compared. For more information,
For more information, go to
read the Synchronisation Feature
guide.
Energy consumption
To calculate and view the energy
consumption for a session you must
first set your personal profile in
Settings in Tracker. You view the
energy consumption in the result view.
Synchronising using a
computer
You can use the USB cable or
Bluetooth wireless technology to
synchronise phone contacts,
appointments, bookmarks, tasks and
notes with a computer program such
as Microsoft Outlook®.
To turn on energy consumption
• Select Menu > Location services >
Tracker > Settings > Energy
consumption > On.
Before synchronising, you need to
install the Sony Ericsson PC Suite.
Sony Ericsson PC Suite software is
included on the CD with your phone and
available for download at
.
page
.
32
60
Synchronising
This is an Internet version of this publication. © Print only for private use.
To install the Sony Ericsson PC Suite
Microsoft Exchange ActiveSync. For
more information, go to
read the Synchronisation Feature
guide.
1 Turn on your computer and insert the
CD. The CD starts automatically and
the installation window opens.
2 Select a language and click OK.
3 Click Install Sony Ericsson PC suite and
follow the instructions on the screen.
To synchronise using the
Sony Ericsson PC Suite
1 Computer: Start Sony Ericsson PC
Suite from Start/Programs/
Sony Ericsson/Sony Ericsson PC
Suite.
2 Follow the instructions in the
Sony Ericsson PC Suite for how to
connect.
3 Phone: Select Phone mode.
4 Computer: When you are notified that
the Sony Ericsson PC Suite has found
your phone, you can start
synchronising.
For usage details, see the
Sony Ericsson PC Suite Help section
once the software has been installed on
your computer.
Synchronising using an
Internet service
You can synchronise with an Internet
service using SyncML™ or a
Microsoft® Exchange Server using
Synchronising
61
This is an Internet version of this publication. © Print only for private use.
To view the current software in the
phone
More features
1 From standby select Menu > Settings >
the General tab > Update service.
2 Select Software version.
Flight mode
In Flight mode the network and radio
transceivers are turned off to prevent
disturbance to sensitive equipment.
Update Service using the phone
You can update your phone over the air
using your phone. You do not lose
personal or phone information.
When the flight mode menu is activated
you are asked to select a mode the next
time you turn on your phone:
Update Service using your phone
requires data access such as GPRS.
• Normal mode – full functionality
• Flight mode – limited functionality
To select update settings
To activate the flight mode menu
• From standby select Menu > Settings >
the General tab > Update service >
Settings > Internet settings.
• From standby select Menu > Settings >
the General tab > Flight mode >
Continue > Show at startup.
To use Update Service using the
phone
1 Select Menu > Settings > General >
Update service.
2 Select Search for update and follow the
instructions that appear.
To select flight mode
1 When the flight mode menu is
activated, turn off your phone.
2 Turn on your phone and select Flight
mode.
Update Service
You can update your phone with the
latest software using your phone or a
PC.
Update Service using a PC
You can update your phone using the
provided USB cable and an Internet
connected PC.
This service is not available in all
countries/regions.
Make sure all personal data on your
phone's memory is backed up before
you perform an update using a PC.
62
More features
This is an Internet version of this publication. © Print only for private use.
To use Update Service using a PC
4 Scroll to Alarm signal: and select Edit.
5 Find and select an alarm signal. Select
Save.
• Go to
.
To silence the alarm
• When the alarm sounds, press any key.
• To repeat the alarm, select Snooze.
Alarms
You can set a sound or the radio as an
alarm signal. The alarm sounds even if
the phone is turned off. When the alarm
sounds you can silence it or turn it off.
To turn off the alarm
• When the alarm sounds, press any key,
then select Turn off.
To set the alarm
To cancel the alarm
1 From standby select Menu > Organiser
> Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to Time: and select Edit.
4 Enter a time and select OK > Save.
1 From standby select Menu > Organiser
> Alarms.
2 Scroll to an alarm and select Turn off.
The alarm in silent mode
You can set the alarm not to sound
when the phone is in silent mode.
To set the recurrent alarm
1 From standby select Menu > Organiser
> Alarms.
To set an alarm to sound or not in
silent mode
1 From standby select Menu > Organiser
> Alarms.
2 Scroll to an alarm and select Edit.
3 Scroll to the tab.
2 Scroll to an alarm and select Edit.
3 Scroll to Recurrent: and select Edit.
4 Scroll to a day and select Mark.
5 To select another day, scroll to the day
and select Mark.
6 Select Done > Save.
4 Scroll to Silent mode: and select Edit.
5 Select an option.
To set the alarm signal
1 From standby select Menu > Organiser
> Alarms.
To set the snooze duration
2 Scroll to an alarm and select Edit.
3 Scroll to the tab.
1 From standby select Menu > Organiser
> Alarms.
More features
63
This is an Internet version of this publication. © Print only for private use.
2 Scroll to an alarm and select Edit.
3 Scroll to Snooze duration: and select
Edit.
To edit an appointment
1 From standby select Menu > Organiser
> Calendar.
2 Select a date.
4 Select an option.
3 Scroll to an appointment and select
View.
Calendar
4 Select Options > Edit.
5 Edit the appointment and confirm each
entry.
You can synchronise your calendar with
a computer calendar, with a calendar on
the Web or with a Microsoft® Exchange
Server (Microsoft® Outlook®).
6 Select Save.
To set when reminders should sound
Appointments
You can add new appointments or
reuse existing appointments.
1 From standby select Menu > Organiser
> Calendar.
2 Select a date.
To add an appointment
1 From standby select Menu > Organiser
3 Select Options > Advanced >
Reminders.
4 Select an option.
> Calendar.
2 Select a date.
A reminders option set in calendar affects
a reminders option set in tasks.
3 Scroll to New appointment and select
Add.
4 Enter the information and confirm each
Notes
entry.
5 Select Save.
You can make notes and save them.
You can also show a note in standby.
To view an appointment
To add a note
1 From standby select Menu > Organiser
> Notes.
2 Scroll to New note and select Add.
3 Write a note and select Save.
1 From standby select Menu > Organiser
> Calendar.
2 Select a date.
3 Scroll to an appointment and select
View.
64
More features
This is an Internet version of this publication. © Print only for private use.
To show a note in standby
Profiles
1 Select Menu >Organiser > Notes.
2 Scroll to a note and select Options >
Show in standby.
You can change settings such as the
ring volume and vibrating alert to suit
different locations. You can reset all
profiles to the phone’s original settings.
To hide a note from standby
1 Select Menu > Organiser > Notes.
2 Scroll to the note shown in standby.
This is marked with an icon. Select
Options > Hide in standby.
To select a profile
1 From standby select Menu > Settings >
the General tab > Profiles.
2 Select a profile.
To view and edit a profile
1 From standby select Menu > Settings >
the General tab > Profiles.
2 Scroll to a profile and select Options >
View and edit.
Tasks
You can add new tasks or reuse
existing tasks.
To add a task
1 From standby select Menu > Organiser
> Tasks.
You cannot rename the Normal profile.
2 Select New task and select Add.
3 Select an option.
4 Enter details and confirm each entry.
Time and date
To set the time
To set when reminders should sound
1 From standby select Menu > Organiser
> Tasks.
1 From standby select Menu > Settings >
the General tab > Time & date > Time.
2 Enter the time and select Save.
2 Scroll to a task and select Options >
Reminders.
To set the date
1 From standby select Menu > Settings >
the General tab > Time & date > Date.
2 Enter the date and select Save.
3 Select an option.
A reminders option set in tasks affects a
reminders option set in calendar.
More features
65
This is an Internet version of this publication. © Print only for private use.
To set the time zone
Ringtones
1 From standby select Menu > Settings >
the General tab > Time & date > My time
zone.
To set a ringtone
1 From standby select Menu > Settings >
the Sounds & alerts tab > Ringtone.
2 Find and select a ringtone.
2 Select the time zone you are in.
If you select a city, My time zone also
updates the time when daylight saving
time changes.
To set the ringtone volume
1 From standby select Menu > Settings >
the Sounds & alerts tab > Ring volume.
2 Press or to change the volume.
3 Select Save.
Theme
You can change the appearance of the
screen through items such as colours
and wallpaper. You can also create
new themes and download them. For
more information, go to
To turn off the ringtone
• From standby press and hold down
.
The alarm signal is not affected.
To set a theme
To set the vibrating alert
1 From standby select Menu > Settings >
the Display tab > Theme.
2 Scroll to a theme and select Set.
1 From standby select Menu > Settings >
the Sounds & alerts tab > Vibrating
alert.
2 Select an option.
Main menu layout
You can change the layout of the icons
in the main menu.
Screen orientation
You can change between landscape
and portrait orientation, or select Auto
rotate to have the orientation change
when you rotate the phone.
To change the main menu layout
1 From standby select Menu > Options >
Main menu layout.
2 Select an option.
66
More features
This is an Internet version of this publication. © Print only for private use.
To change screen orientation in the
browser
applications, see I cannot use Internet-
based services on page 70.
1 From standby select Menu > .
2 Select Options > Advanced >
Orientation.
To select a Java application
1 Select Menu > Organiser >
Applications.
2 Select an application.
3 Select an option.
To change screen orientation in
Media
1 From standby select Menu > Media >
Settings > Orientation.
2 Select an option.
To set permissions for a Java
application
1 Select Menu > Organiser >
Applications.
2 Scroll to an application and select
Options > Permissions.
3 Set permissions.
Games
Your phone contains preloaded
games. You can also download games.
Help texts are available for most
games.
Java application screen size
Some Java applications are designed
for a specific screen size. For more
information, contact the application
vendor.
To start a game
1 From standby select Menu > Media >
Games.
2 Select a game.
To set the screen size for a Java
application
1 Select Menu > Organiser >
Applications.
2 Scroll to an application and select
Options > Screen size.
3 Select an option.
To end a game
• Press
.
Applications
You can download and run Java
applications. You can also view
information or set different
Walk mate
Walk mate is a step counter
application. It keeps track of how many
permissions. If you cannot use Java
More features
67
This is an Internet version of this publication. © Print only for private use.
steps you have walked and how many
steps you have left towards a daily
goal. You can put your phone in a
pocket when you use Walk mate. You
can also set Walk mate as wallpaper to
view in standby.
2 Enter a new four-to-eight-digit PIN and
select OK.
3 Re-enter the new PIN and select OK.
To edit the PIN
1 From standby select Menu > Settings >
the General tab > Security > Locks > SIM
protection > Change PIN.
To set Walk mate as wallpaper
1 From standby select Menu > Settings >
the Display tab.
2 Select Wallpaper > Application.
3 Select Walk mate.
2 Enter your PIN and select OK.
3 Enter a new four-to-eight-digit PIN and
select OK.
4 Re-enter the new PIN and select OK.
If Codes do not match appears, you
entered the new PIN incorrectly. If Wrong
PIN appears, followed by Old PIN:, you
entered your old PIN incorrectly.
Locks
SIM card lock
This lock only protects your
subscription. Your phone will work with
a new SIM card. If the lock is on, you
have to enter a PIN (Personal Identity
Number).
To use the SIM card lock
1 From standby select Menu > Settings >
the General tab > Security > Locks > SIM
protection > Protection.
2 Select an option.
3 Enter your PIN and select OK.
If you enter your PIN incorrectly three
times in a row, the SIM card is blocked
and you need to enter your PUK
(Personal Unblocking Key). Your PIN
and PUK are supplied by your network
operator.
Phone lock
You can stop unauthorised use of your
phone. Change the phone lock code
(0000) to any four-to-eight-digit
personal code.
To unblock the SIM card
1 When PIN blocked appears, enter your
PUK and select OK.
It is important that you remember your
new code. If you forget it, you have to take
68
More features
This is an Internet version of this publication. © Print only for private use.
your phone to your local Sony Ericsson
retailer.
To use the automatic keylock
1 From standby select Menu > Settings >
the General tab > Security > Automatic
keylock.
To use the phone lock
1 From standby select Menu > Settings >
the General tab > Security > Locks >
Phone protection > Protection.
2 Select an option.
3 Enter the phone lock code and select
OK.
2 Select an option.
To unlock the keypad manually
• From standby press any key and select
Unlock > OK.
IMEI number
To unlock the phone
• Enter your code and select OK.
To view your IMEI number
• From standby press
,
,
,
,
To change the phone lock code
.
1 From standby select Menu > Settings >
the General tab > Security > Locks >
Phone protection > Change code.
2 Enter the old code and select OK.
3 Enter the new code and select OK.
4 Repeat the code and select OK.
Keypad lock
You can set this lock to avoid
accidental dialling. Incoming calls can
be answered without unlocking the
keypad.
Calls to the international emergency
number 112 can still be made.
More features
69
This is an Internet version of this publication. © Print only for private use.
I cannot charge the phone or battery
capacity is low
The charger is not properly connected
or the battery connection is poor.
Remove the battery and clean the
connectors.
Troubleshooting
Some problems will require you to call
your network operator.
For more support go to
The battery is worn out and needs to be
page 8.
Common questions
I have problems with memory
capacity or the phone is working
slowly
No battery icon appears when I start
charging the phone
Restart your phone every day to free
memory or do a Master reset.
It may take a few minutes before the
battery icon appears on the screen.
Master reset
Some menu options appear in grey
If you select Reset settings, the
changes that you have made to
settings will be deleted.
A service is not activated. Contact your
network operator.
I cannot use Internet-based services
If you select Reset all, your settings and
content, such as contacts, messages,
pictures, sounds and downloaded
games, will be deleted. You may also
lose content that was in the phone at
purchase.
Your subscription does not include
data capability. Settings are missing or
incorrect.
You can download settings by going to
To reset the phone
I cannot send messages from my
phone
Most messages require a service
centre number to send them. The
number is supplied by your service
1 From standby select Menu > Settings >
the General tab > Master reset.
2 Select an option.
3 Follow the instructions that appear.
70
Troubleshooting
This is an Internet version of this publication. © Print only for private use.
provider and is usually saved on the
SIM card. If the number to your service
centre is not saved on your SIM card,
you must enter the number yourself.
2 Select an existing profile or create a
new one.
To set the message server address
1 From standby select Menu > Settings >
the Connectivity tab > Message
settings > Picture message.
2 Scroll to a profile and select Options >
Edit.
3 Scroll to Message server and select
Edit.
To send most picture messages, you
must set an MMS profile and the
address of your message server. If no
MMS profile or message server exists,
you can receive all the settings
automatically from your network
operator or at
4 Enter the address and select OK >
Save.
To enter a service centre number
The phone does not ring or rings too
softly
Make sure that Silent mode has not
ringtone on page 66.
1 From standby select Menu > Settings >
Connectivity tab > Message settings >
Text message and scroll to Service
centre. The number is shown if it is
saved on the SIM card.
2 If there is no number shown, select
Edit.
the ringtone volume on page 66.
3 Scroll to New ServiceCentre and select
Add.
Check the profile. See To select a
profile on page 65.
4 Enter the number, including the
international “+” sign and country/
region code.
Check the divert call options. See To
divert calls on page
.
43
5 Select Save.
The phone cannot be detected by
other devices using Bluetooth
wireless technology
You have not turned the Bluetooth
function on. Make sure that the visibility
To select an MMS profile
1 From standby select Menu > Settings >
the Connectivity tab > Message
settings > Picture message.
Troubleshooting
71
This is an Internet version of this publication. © Print only for private use.
is set to show phone. See To turn on
the Bluetooth function on page
Where can I find the regulatory
information such as my IMEI number
if I cannot turn on my phone?
.
34
I cannot synchronise or transfer
content between my phone and my
computer, when using the USB cable.
The cable or software that came with
your phone has not been properly
installed. Go to
read Feature guides which contain
detailed installation instructions and
troubleshooting guides.
How do I use my new Sony Ericsson
cell phone to upload photos to
photo.blog.sina.com?
I have forgotten my code memo
passcode
First, make sure that you have
registered for an account on
photo.blog.sina.com.
If you forget your passcode, you must
reset the code memo. This means that
all entries in the code memo are
deleted. The next time you enter the
code memo, you must proceed as if
you are opening it for the first time.
You have to link up your cell phone
number with photo.blog.sina.com
to be able to use this function.
Then follow these steps to link up:
To reset code memo
1 On your computer, register and log in
at photo.blog.sina.com, and then click
on the Upload Photos button. Click on
the Link up your cell phone for free link
in the upload page.
2 Enter your cell phone number in the
upload page, and then click the Save
button. Now your cell phone number
is linked up with photo.blog.sina.com!
1 From standby select Menu > Organiser
> Code memo.
2 Enter an incorrect passcode 3 times.
3 Reset Code memo and delete all
items? appears.
4 Select Yes.
72
Troubleshooting
This is an Internet version of this publication. © Print only for private use.
3 Use your cell phone to edit
1 Register/log in at 163.com, then go
to the SMS blogging services page
Free Activation of SMS Blogging.
2 Enter your account number, password,
and mobile phone number, and then
click Next.
3 After clicking Get Activation Code
For Free, you will receive a six-digit
activation code via SMS; enter this code
in the box provided and click Next.
4 When you see the Phone Activation
Complete page, then your cell phone
has been successfully activated for
SMS/MMS blogging services, and
you can start blogging right away.
a multimedia message and send it
to 1066888817102. This picture will
appear in your default album on
photo.blog.sina.com. The title and text
of the multimedia message will become
the title and description of the photo
on photo.blog.sina.com. (Sina.com
does not charge anything for you to
send photos from your cell phone to
photo.blog.sina.com, but local telecom
operators will charge transmission
fees according to their own policies.)
Follow these steps when you want to
cancel the link or if you need to change
the number of the linked up cell phone:
1 Log in to photo.blog.sina.com and click
on the Upload Photos button. Click on
the Cancel link to cell phone link in the
upload page.
2 Click the OK button, and the link
between your cell phone number and
photo.blog.sina.com will be canceled.
About the fees:
1. There is no monthly service charge
for SMS/MMS blogging; 163.com
does not charge any fees.
2. Telecom charges are the same as
those for SMS/MMS messages sent
to other phones, and are determined
by your telecom provider (China Mobile
or China Unicom).
SMS/MMS Blogging Services
Activation Instructions for
blog.163.com
Please first log in to the 163.com
SMS/MMS blogging services page
to start the activation process:
There is no charge for undelivered
messages; incoming messages are free.
Troubleshooting
73
This is an Internet version of this publication. © Print only for private use.
security code, for example your PIN,
you have to confirm the new code. See
SIM card lock on page 68.
Error messages
Insert SIM
There is no SIM card in your phone or
you may have inserted it incorrectly.
No netw. coverage
mode on page 62.
The SIM card connectors need
cleaning. If the card is damaged,
contact your network operator.
Your phone is not receiving any
network signal, or the received signal is
too weak. Contact your network
operator and make sure that the
network has coverage where you are.
Insert correct SIM card
Your phone is set to work only with
certain SIM cards. Check if you are
using the correct operator SIM card.
The SIM card is not working properly.
Insert your SIM card in another phone.
If this works, it is probably your phone
that is causing the problem. Please
contact the nearest Sony Ericsson
service location.
Wrong PIN/Wrong PIN2
You have entered your PIN or PIN2
incorrectly.
Enter the correct PIN or PIN2 and
Emerg. calls only
select Yes.
You are within range of a network, but
you are not allowed to use it. However,
in an emergency, some network
PIN blocked/PIN2 blocked
You have entered your PIN or PIN2
code incorrectly three times in a row.
operators allow you to call the
international emergency number 112.
page 68.
.
38
PUK blocked. Contact operator.
Codes do not match
Codes that you have entered do not
match. When you want to change a
You entered your personal unblocking
key code (PUK) incorrectly 10 times in
a row.
74
Troubleshooting
This is an Internet version of this publication. © Print only for private use.
•
•
Do not paint or attempt to
Important information
disassemble or modify the
product. Only Sony Ericsson
authorised personnel should
Sony Ericsson Consumer Web
site
perform service.
If you are in close proximity to a pacemaker or
other medical devices, or you are in a hospital, or
you have a pacemaker or cochlea implanted, or
you are using a hearing aid, please consult
authorised physicians and refer to instructions
from the medical device manufacturer before you
use the product.
support section where help and tips are only a few
clicks away. Here you will find the latest computer
software updates and tips on how to use your
product more efficiently.
•
•
Discontinue use of electronic devices, or disable
the radio transmitting functionality of the device,
where required or requested to do so.
Do not use the product in a potentially explosive
environment, such as a gas station, oil depot,
chemical factory or other flammable and
explosive areas.
Do not place the product, or install wireless
equipment, in the area above an air bag in a car.
Caution: Cracked or broken displays may create
sharp edges or splinters that could be harmful
upon contact.
Guidelines for Safe and
Efficient Use
Please follow these guidelines. Failure
to do so might entail a potential health
risk or product malfunction. If in doubt
as to its proper function, have the product checked
by a certified service partner before charging or
using it.
•
•
•
Do not use the Bluetooth Headset in positions
where it is uncomfortable or will be subject to
pressure.
Recommendations for care and safe
use of our products
•
Handle with care and keep in a clean and dust-
free place.
Warning! May explode if disposed of in fire.
Do not expose to liquid or moisture or excess
humidity.
Children
Warning! Keep out of the reach of
children. Do not allow children to play
with mobile phones or accessories. They could hurt
themselves or others. Products may contain small
parts that could become detached and create a
choking hazard.
•
•
•
For optimum performance, the
product should not be operated
in temperatures below
-10°C(+14°F) or above
+45°C(+113°F). Do not expose the battery to
temperatures above +60°C(+140°F).
Do not expose to flames or lit
tobacco products.
Do not drop, throw or try to bend
the product.
Power supply (Charger)
•
•
Connect the charger to power sources as marked on
the product. Do not use outdoors or in damp areas.
Do not alter or subject the cord to damage or stress.
Unplug the unit before cleaning it. Never alter the
plug. If it does not fit into the outlet, have a proper
Important information
75
This is an Internet version of this publication. © Print only for private use.
outlet installed by an electrician. When a power
supply is connected there is a small drain of power.
To avoid this small energy waste, disconnect the
power supply when the product is fully charged. Use
of charging devices that are not Sony Ericsson
branded may pose increased safety risks.
Driving
Some vehicle manufacturers forbid the use of
phones in their vehicles unless a handsfree kit with
an external antenna supports the installation. Check
with the vehicle manufacturer's representative to be
sure that the mobile phone or Bluetooth handsfree
will not affect the electronic systems in the vehicle.
Full attention should be given to driving at all times
and local laws and regulations restricting the use of
wireless devices while driving must be observed.
Battery
New or idle batteries can have short-term reduced
capacity. Fully charge the battery before initial use.
Use for the intended purpose only. Charge the
battery in temperatures between +5°C (+41°F) and
+45°C (+113°F). Do not put the battery into your
mouth. Do not let the battery contacts touch another
metal object. Turn off the product before removing
the battery. Performance depends on temperatures,
signal strength, usage patterns, features selected
and voice or data transmissions. Only
Sony Ericsson service partners should remove or
replace built-in batteries. Use of batteries that are
not Sony Ericsson branded may pose increased
safety risks. Replace the battery only with another
Sony Ericsson battery that has been qualified with
the product per the standard IEEE-1725. Use of an
unqualified battery may present a risk of fire,
explosion, leakage or other hazard.
GPS/Location based functions
Some products provide GPS/Location based
functions. Location determining functionality is
provided “As is” and “With all faults”.
Sony Ericsson does not make any representation or
warranty as to the accuracy of such location
information.
Use of location-based information by the device
may not be uninterrupted or error free and may
additionally be dependent on network service
availability. Please note that functionality may be
reduced or prevented in certain environments such
as building interiors or areas adjacent to buildings.
Caution: Do not use GPS functionality in a manner
which causes distraction from driving.
Note: The environmental protection period (EPUP) of
a battery is 5 years.
5
Emergency calls
Calls cannot be guaranteed under all conditions.
Never rely solely upon mobile phones for essential
communication. Calls may not be possible in all
areas, on all networks, or when certain network
services and/or phone features are used.
Personal medical devices
Mobile phones may affect implanted medical
equipment. Reduce risk of interference by keeping
a minimum distance of 15 cm(6 inches) between the
phone and the device. Use the phone at your right
ear. Do not carry the phone in your breast pocket.
Turn off the phone if you suspect interference. For
all medical devices, consult a physician and the
manufacturer.
Antenna
Use of antenna devices not marketed by
Sony Ericsson could damage the phone, reduce
performance, and produce SAR levels above the
established limits. Do not cover the antenna with
76
Important information
This is an Internet version of this publication. © Print only for private use.
your hand as this affects call quality, power levels
and can shorten talk and standby times.
prohibited onboard aircraft or in other areas where
radio transmissions are prohibited. In such
environments, please seek proper authorisation
before enabling Bluetooth or WLAN functionality
even in Flight mode.
Radio Frequency (RF) exposure and
Specific Absorption Rate (SAR)
When the phone or Bluetooth handsfree is turned
on, it emits low levels of radio frequency energy.
International safety guidelines have been developed
through periodic and thorough evaluation of
scientific studies. These guidelines establish
permitted levels of radio wave exposure. The
guidelines include a safety margin designed to
assure the safety of all persons and to account for
any variations in measurements.
Specific Absorption Rate (SAR) is used to measure
radio frequency energy absorbed by the body when
using a mobile phone. The SAR value is determined
at the highest certified power level in laboratory
conditions, but because the phone is designed to
use the minimum power necessary to access the
chosen network, the actual SAR level can be well
below this value. There is no proof of difference in
safety based on difference in SAR value.
Products with radio transmitters sold in the US must
be certified by the Federal Communications
Commission (FCC). When required, tests are
performed when the phone is placed at the ear and
when worn on the body. For body-worn operation,
the phone has been tested when positioned a
minimum of 15 mm from the body without any metal
parts in the vicinity of the phone or when properly
used with an appropriate Sony Ericsson accessory
and worn on the body.
Malware
Malware (short for malicious software) is software
that can harm the mobile phone or other computers.
Malware or harmful applications can include viruses,
worms, spyware, and other unwanted programs.
While the device does employ security measures to
resist such efforts, Sony Ericsson does not warrant
or represent that the device will be impervious to the
introduction of malware. You can however reduce
the risk of malware attacks by using care when
downloading content or accepting applications,
refraining from opening or responding to messages
from unknown sources, using trustworthy services
to access the Internet, and only downloading
content to the mobile phone from known, reliable
sources.
Accessories
Use only Sony Ericsson branded original
accessories and certified service partners.
Sony Ericsson does not test third-party accessories.
Accessories may influence RF exposure, radio
performance, loudness, electric safety and other
areas. Third-party accessories and parts may pose
a risk to your health or safety or decrease
performance.
Disposal of old electrical
and electronic equipment
For more information about SAR and radio
frequency exposure, go to:
Electronic equipment and batteries
should not be included as household waste but
should be left at an appropriate collection point for
recycling. This helps prevent potential negative
consequences for the environment and human
Flight mode
Bluetooth and WLAN functionality, if available in the
device, can be enabled in Flight mode but may be
Important information
77
This is an Internet version of this publication. © Print only for private use.
health. Check local regulations by contacting your
local city office, your household waste disposal
service, the shop where you purchased the product
or calling a Sony Ericsson call centre. Do not attempt
to remove internal batteries. Internal batteries shall
be removed only by a waste treatment facility or
trained service professional.
Disposing of the battery
Check local regulations or call a
Sony Ericsson call centre for
information. Never use municipal waste.
Declaration of substances
When the product is operated under the conditions in the product manual, the environmental
protection period (EPUP) is 20 years.
Part Name
Toxic or hazardous substances
Lead (Pb) Mercury (Hg)Cadmium (Cd)Hexavalent
Polybrominated
biphenyls (PBB)
Polybrominated
diphenyl ethers
(PBDE)
chromium
(Cr6+)
Phone
X
X
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Battery
Accessories and X
chargers
0: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is
below the limit requirement in SJ/T 11363-2006. X: Indicates that this toxic or hazardous substance contained in
at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006.
(Currently there are no alternative technologies available.)
operating system format when formatting the
memory card on a PC. For details, refer to the
Memory card
If the product comes complete with a removable
operating instructions of the device or contact
memory card, it is generally compatible with the
customer support.
handset purchased but may not be compatible with
other devices or the capabilities of their memory
cards. Check other devices for compatibility before
purchase or use. If the product is equipped with a
memory card reader, check memory card
compatibility before purchase or use.
Warning!
If the device requires an adapter for insertion into the
handset or another device, do not insert the card
directly without the required adapter.
Memory cards are generally formatted prior to
shipping. To reformat the memory card, use a
compatible device. Do not use the standard
78
Important information
This is an Internet version of this publication. © Print only for private use.
Precautions on memory card use
Loudness warning!
Avoid volume levels that may be harmful to your
hearing.
•
•
Do not expose the memory card to moisture.
Do not touch terminal connections with your
hand or any metal object.
•
•
Do not strike, bend, or drop the memory card.
Do not attempt to disassemble or modify the
memory card.
Do not use or store the memory card in humid or
corrosive locations or in excessive heat such as
a closed car in summer, in direct sunlight or near
a heater, etc.
Do not press or bend the end of the memory card
adapter with excessive force.
Do not let dirt, dust, or foreign objects get into the
insert port of any memory card adapter.
Check you have inserted the memory card
correctly.
Insert the memory card as far as it will go into any
memory card adapter needed. The memory card
may not operate properly unless fully inserted.
We recommend that you make a backup copy of
important data. We are not responsible for any
loss or damage to content you store on the
memory card.
Recorded data may be damaged or lost when
you remove the memory card or memory card
adapter, turn off the power while formatting,
reading or writing data, or use the memory card
in locations subject to static electricity or high
electrical field emissions.
End User Licence Agreement
Software delivered with this device and its media is
owned by Sony Ericsson Mobile Communications
AB, and/or its affiliated companies and its suppliers
and licensors.
Sony Ericsson grants you a non-exclusive limited
licence to use the Software solely in conjunction with
the Device on which it is installed or delivered.
Ownership of the Software is not sold, transferred or
otherwise conveyed.
Do not use any means to discover the source code
or any component of the Software, reproduce and
distribute the Software, or modify the Software. You
are entitled to transfer rights and obligations to the
Software to a third party, solely together with the
Device with which you received the Software,
provided the third party agrees in writing to be
bound by the terms of this Licence.
This licence exists throughout the useful life of this
Device. It can be terminated by transferring your
rights to the Device to a third party in writing.
Failure to comply with any of these terms and
conditions will terminate the licence immediately.
Sony Ericsson and its third party suppliers and
licensors retain all rights, title and interest in and to
the Software. To the extent that the Software
contains material or code of a third party, such third
parties shall be beneficiaries of these terms.
This licence is governed by the laws of Sweden.
When applicable, the foregoing applies to statutory
consumer rights.
•
•
•
•
•
•
•
Protection of personal information
Erase personal data before disposing of the product.
To delete data, perform a master reset. Deleting data
from the phone memory does not ensure that it
cannot be recovered. Sony Ericsson does not
warrant against recovery of information and does
not assume responsibility for disclosure of any
information even after a master reset.
In the event Software accompanying or provided in
conjunction with your device is provided with
additional terms and conditions, such provisions
Important information
79
This is an Internet version of this publication. © Print only for private use.
shall also govern your possession and usage of the
Software.
always make backup copies of all the information
stored on your Sony Ericsson Product such as
downloads, calendar and contacts before handing
in your Sony Ericsson Product for repair or
replacement.
Limited Warranty
Sony Ericsson Mobile Communications AB,
SE-221 88 Lund, Sweden, (Sony Ericsson) or its
local affiliated company, provides this Limited
Warranty for your mobile phone, original accessory
delivered with your mobile phone, and/or your
mobile computing product (hereinafter referred to as
“Product”).
Should your Product need warranty service, please
return it to the dealer from whom it was purchased,
or contact your local Sony Ericsson Call Center
(national rates may apply) or visit
Conditions
1. The warranty is valid only if the original proof of
purchase issued to the original purchaser by a
Sony Ericsson authorised dealer specifying the date
of purchase and serial number*, for this Product, is
presented with the Product to be repaired or
replaced. Sony Ericsson reserves the right to refuse
warranty service if this information has been
removed or changed after the original purchase of
the Product from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the
repaired or replaced Product shall be warranted for
the remaining time of the original warranty period or
for thirty (30) days from the date of repair, whichever
is longer. Repair or replacement may involve the use
of functionally equivalent reconditioned units.
Replaced parts or components will become the
property of Sony Ericsson.
3. This warranty does not cover any failure of the
Product due to normal wear and tear, or due to
misuse, including, but not limited to, use in other
than the normal and customary manner, in
accordance with the Sony Ericsson instructions for
use and maintenance of the Product. Nor does this
warranty cover any failure of the Product due to
accident, software or hardware modification or
adjustment, acts of God or damage resulting from
liquid.
A rechargeable battery can be charged and
discharged hundreds of times. However, it will
eventually wear out – this is not a defect. When the
talk-time or standby time is noticeably shorter, it is
time to replace the battery. Sony Ericsson
recommends that you use only batteries and
chargers approved by Sony Ericsson.
www.sonyericsson.com/cn to get further
information.
What we will do
If, during the warranty period, this Product fails to
operate under normal use and service, due to
defects in design, materials or workmanship,
Sony Ericsson authorised distributors or service
partners, in the country/region* where you
purchased the Product, will, at their option, either
repair or replace the Product in accordance with the
terms and conditions stipulated herein.
Sony Ericsson and its service partners reserve the
right to charge a handling fee if a returned Product
is found not to be under warranty according to the
conditions below.
Please note that some of your personal settings,
downloads and other information may be lost when
your Sony Ericsson Product is repaired or replaced.
At present, Sony Ericsson may be prevented by
applicable law, other regulation or technical
restrictions from making a backup copy of certain
downloads. Sony Ericsson does not take any
responsibility for any lost information of any kind and
will not reimburse you for any such loss. You should
80
Important information
This is an Internet version of this publication. © Print only for private use.
Minor variations in display brightness and colour
may occur between phones. There may be tiny
bright or dark dots on the display. These are called
defective pixels and occur when individual dots have
malfunctioned and can not be adjusted. Two
defective pixels are deemed acceptable.
Minor variations in the appearance of the camera
image may occur between phones. This is not
uncommon in digital cameras and does not mean
that the camera is defective in any way.
Some countries/regions/states do not allow the
exclusion or limitation of incidental or consequential
damages, or limitation of the duration of implied
warranties, so the preceding limitations or
exclusions may not apply to you.
The warranty provided does not affect the
consumer's statutory rights under applicable
legislation in force, nor the consumer’s rights against
the dealer arising from their sales/purchase
contract.
4. Since the cellular system on which the Product is to
operate is provided by a carrier independent from
Sony Ericsson, Sony Ericsson will not be responsible
for the operation, availability, coverage, services or
range of that system.
5. This warranty does not cover Product failures
caused by installations, modifications, or repair or
opening of the Product performed by a non-
Sony Ericsson authorised person.
6. The warranty does not cover Product failures which
have been caused by use of accessories or other
peripheral devices which are not Sony Ericsson
branded original accessories intended for use with
the Product.
7. Tampering with any of the seals on the Product will
void the warranty.
8. THERE ARE NO EXPRESS WARRANTIES,
WHETHER WRITTEN OR ORAL, OTHER THAN THIS
PRINTED LIMITED WARRANTY. ALL IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION
THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED TO THE
DURATION OF THIS LIMITED WARRANTY. IN NO
EVENT SHALL SONY ERICSSON OR ITS
LICENSORS BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY NATURE
WHATSOEVER, INCLUDING BUT NOT LIMITED TO
LOST PROFITS OR COMMERCIAL LOSS TO THE
FULL EXTENT THOSE DAMAGES CAN BE
DISCLAIMED BY LAW.
* In some countries/regions additional information is
requested. If so, this is clearly shown on the valid
proof of purchase.
FCC Statement
This device complies with Part 15 of
the FCC rules. Operation is subject to
the following two conditions: (1) This
device may not cause harmful interference, and (2)
This device must accept any interference received,
including interference that may cause undesired
operation.
Any change or modification not expressly approved
by Sony Ericsson may void the user's authority to
operate the equipment.
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on, the
Important information
81
This is an Internet version of this publication. © Print only for private use.
user is encouraged to try to correct the interference
by one or more of the following measures:
Declaration of Conformity for
W715
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
•
SE-221 88 Lund, Sweden
declare under our sole responsibility that our
product
•
Consult the dealer or an experienced radio/TV
technician for help.
Sony Ericsson type AAD-3880025-AV
and in combination with our accessories, to which
this declaration relates is in conformity with the
appropriate standards EN 301 511:V9.0.2, EN 301
908-1:V3.2.1, EN 301 908-2:V3.2.1, EN 300
328:V1.7.1, EN 301 489-7:V1.3.1, EN 301 489-
17:V1.2.1, EN 301 489-24:V1.4.1, EN 300 440-
1:V1.4.1, EN 300 440-2:V1.1.2, EN 301 489-
3:V1.4.1, EN 60 950-1:2006 following the provisions
of, Radio Equipment and Telecommunication
Terminal Equipment directive 1999/5/EC.
Industry Canada Statement
This device complies with RSS-210 of Industry
Canada.
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2)
this device must accept any interference, including
interference that may cause undesired operation of
the device.
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Lund, October 2008
Rikko Sakaguchi,
Head of Creation & Development
We fulfil the requirements of the R&TTE Directive
(1999/5/EC).
82
Important information
This is an Internet version of this publication. © Print only for private use.
Index
emergency ...................................
handling two calls ........................
A
activity menu ........................................16
alarms ...................................................63
answering service .................................42
applications ..........................................67
appointments .......................................64
assembly ................................................6
international ..................................37
making and receiving ...................37
putting on hold .............................43
recording ......................................
video .............................................38
camera .................................................50
audio book ...........................................
auto rotate ............................................66
activating ......................................
overview .......................................
printing .........................................53
clear bass .............................................26
clear stereo ...........................................26
code memo ..........................................72
B
backing up and restoring .....................35
battery
charging .........................................8
inserting ..........................................6
use and care .................................76
Bluetooth™ wireless technology .........33
bookmarks ...........................................54
business card .......................................41
conference calls ...................................
contacts
adding phone contacts ................
default contacts ...........................39
groups of ......................................42
costs .......................................................7
C
D
calendar ................................................64
date ......................................................65
call divert ..............................................43
declaration of conformity .....................
call list ..................................................
call numbers in message ......................47
call time ................................................
downloading music ..............................28
E
caller-specific ringtones .......................40
calls
email .....................................................48
emergency numbers ............................38
end user licence agreement .................79
accepting .....................................45
answering and rejecting ...............
Index
83
This is an Internet version of this publication. © Print only for private use.
entering text .........................................17
L
language ...............................................17
location services ...................................58
lock
F
file manager ..........................................31
flight mode ...........................................62
keypad ..........................................69
phone ...........................................68
SIM card .......................................68
G
games ...................................................67
geo tagging ..........................................51
GPS ......................................................58
groups ..................................................42
M
master reset .........................................70
Media Manager ....................................32
media transfer ......................................32
memory ................................................16
memory card ........................................16
memory status .....................................41
menu overview .....................................13
messages
H
Bluetooth™ wireless technology .
help .........................................................8
hiding number ......................................
email .............................................48
text and picture ............................46
voice .............................................48
microphone ..........................................37
MMS See picture messages
MusicDJ™ ............................................30
my numbers .........................................45
I
imaging .................................................50
IMEI number .........................................69
Internet
bookmarks ...................................54
screen orientation ........................67
security and certificates ...............56
settings .........................................70
N
navigating menus .................................15
notes ....................................................64
K
keypad lock ..........................................69
keys ......................................................11
O
online music and video clips ................28
84
Index
This is an Internet version of this publication. © Print only for private use.
P
S
pan and zoom, Web pages ..................55
PC Suite ...............................................60
phone memory .....................................16
phone mode .........................................61
phone name .........................................33
phone, turning on ...................................7
photo fix ...............................................51
PhotoDJ™ ............................................53
photos ..................................................51
editing ..........................................53
geo tagging ..................................51
improving .....................................51
tags ..............................................52
safety guidelines ...................................
screen orientation ...........................66, 67
search, on Web pages .........................55
selection keys .......................................15
settings, Internet ..................................70
shake control ........................................25
shortcuts ..............................................15
SIM card
copying to/from ............................40
inserting ..........................................6
lock and unblock ..........................68
SMS See text messages
picture messages .................................
SOS See emergency numbers
pictures ................................................51
PIN ....................................................7, 68
playlists ................................................26
PlayNow™ ............................................28
podcasts ..............................................57
power saving ........................................34
profiles ..................................................65
PUK ......................................................68
push email ............................................49
sound recorder .....................................30
Specific Absorption Rate .....................77
speed dialling .......................................42
standby ..................................................7
notes ............................................65
step counter .........................................67
synchronising .......................................60
T
T9™ Text Input .....................................18
tagging photos .....................................51
tasks .....................................................65
templates ..............................................47
text messages ......................................46
theme ...................................................66
time ................................................65, 66
time zone ..............................................66
R
radio .....................................................29
recording, listen to ...............................30
restricted dialling ..................................45
ringtones ..............................................66
roaming ..................................................7
RSS feeds See Web feeds
Index
85
This is an Internet version of this publication. © Print only for private use.
Tracker .................................................59
TrackID™ .............................................28
training .................................................59
transfer method
Bluetooth™ wireless technology . 33
USB cable ....................................32
transferring
W
Walk mate ............................................67
warranty ...............................................
Web feeds ............................................56
Web pages, history ..............................55
music ............................................32
photos ..........................................32
sound ...........................................35
turning on/off
Z
zoom ....................................................51
Bluetooth™ function ....................
phone lock ....................................69
SIM lock protection ......................68
U
Update Service .....................................62
USB cable ............................................
V
video editing .........................................53
video player ..........................................29
video recorder ......................................50
VideoDJ™ ............................................53
voice control .........................................43
voice messages ....................................48
voicemail ..............................................
volume
ear speaker ..................................
ringtone ........................................66
86
Index
This is an Internet version of this publication. © Print only for private use.
|