2-584-978-11(1)
Compact Disc Player
CDP-NW10
DVD Player
DVP-NW50
User’s Manual
2005 Sony Corporation
TABLE OF CONTENTS
Notes About the Discs
5
Chapter 1 Getting Started
Setting up the System 10
Connecting audio Equipment 10
Selecting a method for using the remote 11
Setting an IP Address 11
Setting the time 13
Selecting the time interval for automatic return to the Home Menu 13
Chapter 2 Parts and Controls
Preparing the remote 18
Setting a remote code on the remote 18
Menu operation 18
Chapter 3 Playing Discs (CDP-NW10 only)
Various play mode functions (Shuffle play, Repeat play)
Searching for a particular point on a disc (Search/ Scan)
21
21
Chapter 4 Playing Discs (DVP-NW50 only)
Various play mode functions (Shuffle play, Repeat play) 23
Playing a DVD/ VCD/ MP3 Disc 23
Using the DVD´s menu 24
Playing VIDEO CDs with PBC functions (VIDEO CD Ver. 2.0 or higher ) 24
Playing an MP3 audio track 25
Searching for a Scene 25
Searching for a particular point on a disc (Search/ Scan) 25
Searching for a title/ chapter/ track/ scene, etc. (Search mode) 25
Using Various Additional Functions 26
Selecting the audio 26
Selecting the angle 26
Using the Setup Display (DVD Settings) 28
Setting the display (General Setup) 28
Continue to the next page
l
3US
TABLE OF CONTENTS (continued)
Chapter 5 Enjoying Radio and Other Component
Listening to the Radio 31
Listening to a non-preset station 31
Presetting Radio Stations 33
Naming the Preset Stations 33
Chapter 6 Using the System Network
Playing Music on Other Units 35
Playing back music from “NETWORK” 35
Playing back music from “MY MUSIC” 36
Enjoying Music in All Rooms Simultaneously (Party mode) 37
Excluding the Unit from a Party mode (Party Privacy) 37
Talking with Persons in Other Rooms (INTERCOM) 38
Changing the call sound of the INTERCOM 38
Monitoring Other Rooms (MONITOR) 39
Excluding a Unit from MONITOR (Monitor Privacy) 39
Chapter 7 Setting the Timer
Chapter 8 Other Functions
Using the Setup Display 42
Selecting the surround mode (DVP-NW50 only) 42
Adjusting the contrast of the front panel display (DIMMER) 43
Adjusting the front speaker balance (BALANCE) (CDP-NW10 only) 43
Settings for Speakers (DVP-NW50 only) 44
Selecting a speaker size 44
Setting the speaker distance 45
Setting a speaker level 45
Adjusting the speaker volume – TEST TONE 46
Operating a Sony TV with the Remote 47
Controlling your TV with the remote 47
Chapter 9 Other Information
4US
Ab o u t Th is Ma n u a l
No t e s Ab o u t t h e Discs
• Some operations and displays may differ slightly,
depending on the model you use.
• “DVD” may be used as a general term for DVD
VIDEOs, DVD+RWs/ DVD+Rs and DVD-RWs/
DVD-Rs.
To keep the disc clean, handle the disc by its edge. Do not
touch the surface.
• Do not expose the disc to direct sunlight or heat sources such as
hot air ducts, or leave it in a car parked in direct sunlight as the
temperature may rise considerably inside the car.
• The meaning of the icons used in this manual is
described below:
Icon
Meaning
Functions available for DVD VIDEOs and
DVD+RWs/ DVD+Rs or DVD-RWs/
DVD-Rs in video mode.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
Functions available for VIDEO CDs
(including Super VCDs or CD-Rs/
CD-RWs in video CD format or Super
VCD format encoding).
Functions available for music CDs or
CD-Rs/ CD-RWs in music CD format.
• Do not use solvents such as benzine, thinner, commercially
available cleaners, or anti-static spray intended for vinyl LPs.
• If you have printed the disc’s label, dry the label before
playing.
Functions available for DATA CDs
(CD-ROMs/ CD-Rs/ CD-RWs containing
MP3* audio tracks).
* MP3 (MPEG1 Audio Layer 3) is a standard format defined by
ISO (International Organization for Standardization)/ MPEG
which compresses audio data.
5US
Fe a t u re s
The CDP-NW10/ DVP-NW50 (referred to as the Unit in
this manual) is a home audio component system based
on network connections. A Unit is installed into the wall
of a room and connected to other Units using an Ethernet
connection (100Base-TX.)
The system consists of:
– Up to 12 Units (CDP-NW10 or DVP-NW50)
– A personal computer (if necessary)
– Audio output components, such as a CD Changer
– A monitor or a projector (DVP-NW50)
– Two speakers (2CH) (CDP-NW10)/ Five speakers
and a sub woofer (5.1CH) (DVP-NW50)
Tra d e m a rks a n d Co p yrig h t s
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision. Reverse engineering or disassembly is
prohibited.
This Unit incorporates Dolby* Digital and Pro Logic
surround and the DTS** Digital Surround System.
Th e m a in fe a t u re s o f t h e Un it a re t h e fo llo w in g :
*
Manufactured under license from Dolby Laboratories.
“Dolby,”“Pro Logic,” and the double-D symbol are
trademarks of Dolby Laboratories.
• Two types of conventional CD player model and a DVD player
model with a simple timer clock and 2ch audio input
** Manufactured under licence from Digital Theater System,
Inc. “DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater System, Inc.
• The Unit can play back MP3-format audio files stored on a
computer via a network (An exclusive application of PC is
needed)
Gra ce n o t e /CDDB
Corporate description
• The Unit can play back CDs mounted in other Units via a
network
Music recognition technology and related data are provided by
GracenoteR. Gracenote is the industry standard in music
recognition technology and related content delivery. For more
• The Unit can play back the audio contents in all the rooms
simultaneously from the following sources (Party mode)
– CDs in any Units
Proprietary legends
– MP3 discs (DVP-NW50 only) and LINE IN in the
lead operating Unit
– FM or AM tuner
– MP3-format audio files stored on a computer (a
Playlist feature in the Unit is available)
CD and music-related data from Gracenote, Inc., copyright ©
2000-2005 Gracenote. Gracenote CDDBR Client Software,
copyright 2000-2005 Gracenote. This product and service may
practice one or more of the following U.S. Patents: #5,987,525;
#6,061,680; #6,154,773, #6,161,132, #6,230,192, #6,230,207,
#6,240,459, #6,330,593, and other patents issued or pending.
Services supplied and/ or device manufactured under license for
following Open Globe, Inc. United States Patent 6,304,523.
• INTERCOM and MONITOR functions via a network
• 2ch to 5.1ch sound produced from connected speakers for
DVP-NW50, or 2ch sound produced from connected speakers
for CDP-NW10
Gracenote and CDDB are registered trademarks of Gracenote.
The Gracenote logo and logotype, and the “Powered by
Gracenote” logo are trademarks of Gracenote.
6US
CDP-NW10/DVP-NW50 syst e m n e t w o rk
The diagram below illustrates an entire system network made up of multiple Units.
The configuration shown below is for illustrative purposes only. It may differ from an actual system network.
Contact your nearest installer for details on making the required connections for the system network.
KITCHEN
GUEST ROOM
BEDROOM
CDP-NW10
CDP-NW10
CDP-NW10
INTERNET
Hub
Computer
Router
LIVING ROOM
Front Speaker
Front Speaker
DVP-NW50
TV/Projector
CD Changer
Rear
Speaker
Rear
Speaker
Center
Speaker
Sub Woofer
Example of a DVP-NW50 system network
7US
Qu ick Gu id e t o Disc Typ e
Discs that can be played back on the Unit differ,
depending on the model you are using. The kinds of disc
that you can use on the Unit are as follows.
CDP-NW10
DVP-NW50
Format of discs
DVD VIDEO
Format of discs
Music CD
CD-R
DVD-R
CD-RW
DVD-RW
VIDEO CD
Music CD
Also, the Unit can play CD-Rs/ CD-RWs recorded in the
following format:
– Music CD format
– CD Extra format*
* Only a music session can be played back.
The kinds of disc that cannot be played back
– CD-Rs/ CD-RWs other than those recorded in the formats listed
CD-R
above
– CD-ROM
– Data part of CD-Extras
– VIDEO CD
CD-RW
– DVD+R/ DVD-R/ DVD-RW/ DVD+RW
– DVD-ROM
– DVD Audio
– MP3 format
The “DVD VIDEO” logo, the “DVD-R” and the “DVD-
RW” logo are trademarks.
– Super Audio CD
Also, the Unit can play CD-Rs/ CD-RWs recorded in the
following formats:
– Music CD format
– CD Extra format*
– VIDEO CD format
– MP3 format conforming to ISO 9660* Level 1/ Level 2,
or its extended format, Joliet
* A logical format or files and folder on CD-ROMs, defined by
ISO (International Organization for Standardization)
The kinds of disc that cannot be played back
– CD-Rs/ CD-RWs other than those recorded in the formats listed
above
– CD-ROM recorded in PHOTO CD format
– Data part of CD-Extras
– DVD-ROM
– DVD Audio
– Super Audio CD
– DVD VIDEO with a different region code
– DVD-R/ DVD-RW´s inVR (Video Recording) mode
– DVD+R/ DVD-R of double layer disc
8US
Exa m p le o f d iscs t h a t t h e Un it ca n n o t p la y
Re g io n co d e
The Unit cannot play the following discs:
– A disc that has a non-standard shape (e.g., card, heart)
– A disc with paper or stickers on it
This Unit is designed and manufactured to respond to the
Region Management information that is recorded on a
.
DVD VIDEO. The region code of this Unit is “1.”
– A disc that has the adhesive of cellophane tape or a sticker still
left on it.
ALL
This Unit will play DVD VIDEO labelled
1
or
If you try to play any other DVD VIDEO, the message
“wrong region” will appear on the TV screen. Depending
on the DVD VIDEO, there may be no region code
indication, even though playing the DVD VIDEO is
prohibited by area restrictions.
Note about CD-R/CD-RW/DVD-R/DVD-RW (Video mode)/DVD+R/
DVD+RW
In some cases, CD-R/ CD-RW/ DVD-R/ DVD-RW
(Video mode)/ DVD+R/ DVD+RW cannot be played
on the Unit due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software.
The disc will not play if it has not been correctly
finalized. For more information, see the operating
instructions of the recording device.
Note that discs created in the Packet Write format
cannot be played.
Music discs encoded with copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with copyright
protection technologies are marketed by some record
companies. Please be aware that among those discs,
there are some that do not conform to the CD standard
and may not be playable by this product.
Note on DualDisc
A DualDisc is a two sided disc product which mates DVD
recorded material on one side with digital audio material on the
other side.
However, since the audio material side does not conform to the
Compact Disc (CD) standard, playback on this product is not
guaranteed.
No t e o n p la yb a ck o p e ra t io n s o f DVDs a n d
VIDEO CDs
Some playback operations of DVDs and VIDEO CDs may
be intentionally set by software producers. Since this Unit
plays DVDs and VIDEO CDs according to the disc
contents the software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO CDs.
9US
Se t t in g u p t h e Syst e m
Chapter 1
Getting
Started
Your system has already been installed by an installer.
If you want to change the configuration, the TV or the
audio equipment, check the location of the VIDEO out
jack, the LINE IN jack, and the IR IN/ OUT jack. Contact
your nearest installer for details on the connections
required by the system.
This chapter provides you with
information how to connect and setup
the Unit.
Co n n e ct in g a TV (DVP-NW50 o n ly)
Connections between the Unit and each device are made
via cables or cords coming through the wall.
Connect the VIDEO OUT of the Unit to a TV.
Select one of the ways of connection methods shown
below, according to the input jack on your TV.
VIDEO cord (not supplied)
VIDEO OUT
TV
or
of Unit
S VIDEO cord (not supplied)
Note
Do not connect a VCR, etc., between your TV and the
Unit. If you pass the Unit signals via the VCR, you may
not receive a clear image on the TV screen. If your TV has
only one video input jack, connect the Unit to this jack.
VCR
X
X
VIDEO OUT
of Unit
TV
Connect directly
Co n n e ct in g a u d io Eq u ip m e n t
Connections between the Unit and each of devices are
made via cables or cords coming through the wall.
The Unit can input sound from external audio equipment
via the audio connectors on the Unit. Connect the
OUTPUT jacks (L/ R) of the audio equipment to the LINE
IN (L/ R) jacks of the Unit using the proper audio cords
(optional).
Unit
CD Changer
LINE OUT
LINE IN
10US
Se t t in g u p t h e Un it s
Contact your nearest installer for details on the default
setting for each parameters.
Se le ct in g a m e t h o d fo r u sin g t h e re m o t e
Connections between the Unit and each device are made
via cables or cords coming through the wall.
For details on how to make a selection in the Menu, see
page 18.
You can operate a component using the remote if the IR
IN/ OUT terminal of the Unit and the component are
connected. For example, if you connect IR IN of the Unit
and IR OUT of a TV, you can operate the Unit with the
Remote by aiming it at the TV.
Se t t in g a n IP Ad d re ss
There are two ways to acquire an IP address.
The default setting is underlined.
• AUTO:
You can acquire the IP address
automatically.
1 Press the “V” SELECT on the HOME Menu, then
press the “SETUP” SELECT.
Normally, select this setting.
The Setup Menu appears.
• MANUAL: You can set up the IP address manually.
Because some knowledge of networking is
required to use this setting, we recommend
you normally to select “AUTO.”
1 Press the “V” SELECT on the HOME Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “IR ROUTE”
appears on the front panel display.
3 Press the “IR ROUTE” SELECT.
The IR route setup Menu appears.
4 Select a method for using the remote.
The default setting is underlined.
2 Press the “V” SELECT repeatedly until “LAN”
Method
EYE
Operates
appears on the front panel display.
The Unit directly from the remote.
3 Press the “LAN” SELECT.
The LAN setup Menu appears.
JACK
The Unit through the IR IN jack using signals
from the remote.
Both
The Unit directly and through the IR IN
jack using signals from the remote.
4 Press the “IP ADDRESS” SELECT.
The IP address setup Menu appears.
Continue to the next page
l
11US
Se t t in g u p t h e Un it s (co n t in u e d )
5 Press “AUTO” or “MANUAL” SELECT.
If you select “AUTO,” setting an IP address is
completed.
Na m in g t h e Un it
You can change the name of each room to something more
recognizable and have it displayed on the front panel
display.
If you select “MANUAL,” go to the step 6.
1 Press the “V” SELECT on the HOME Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “NAME”
appears on the front panel display.
6 Press the A SELECT to set an IP address.
3 Press the “NAME” SELECT.
“ ” appears, and the first three numbers can be
i
The Room name list appears.
entered.
7 Enter the IP address using numeric buttons on the
4 Press the “KITCHEN,” “BEDROOM,” “DEN,” or
“PATIO” SELECT that you w ant to change the name
by pressing the corresponding SELECT.
remote, then press ENTER.
8 Press the B SELECT to set a Sub-net mask.
“ ” appears, and the first three numbers can be
i
5 If you w ant to name the room as you like, press
the “EDIT” SELECT.
entered.
The Text edit setup Menu appears.
Enter the name in the text box using the function
SELECT.
See the table below for details on the function of each
of the buttons.
9 Enter the Sub-net mask using numeric buttons on
the remote, then press ENTER.
10 Press BACK.
The display returns to the LAN setup Menu.
11 Press the “DIAGNOSIS” SELECT.
The confirmation display appears.
Confirm the following items.
A Moves the cursor to the left in the text being edited
(Text Edit).
B Changes characters in reverse alphabetical order.
C Clears the character on which the cursor is placed
IP Assig n
in the text being edited (Text Edit).
OK
NG
IP address is assigned correctly.
Illegal address has been assigned.
D Cancels editing and returns to the Room name list.
E Moves the cursor to the right in the text being
edited (Text Edit).
IP Co n flict
F Changes characters in alphabetical order.
OK
NG
IP address has no conflict.
Two or more Units are using the same IP
address.
G Enters the selected character into the text box.
H Stores the name and returns to the Room name list.
Tip
Ca b le Co n n e ct
You can input up to eight characters for the name of each room.
OK
NG
Ethernet cable is inserted correctly.
Ethernet cable is not inserted correctly.
12US
Se t t in g t h e t im e
Se t t in g a re m o t e co d e o n t h e Un it
You must set the time to make functions available, such as
an alarm or a sleep timer. Display the Home Menu as
shown below beforehand (see page 18).
If the supplied remote interferes with an other, set the
remote code for this Unit and the remote to one that
differs from the other Unit.
The defalt remote code setting for the Unit and the
supplied remote is CIS2.
1 Press the “V” SELECT on the HOME Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
1 Press the “V” SELECT on the HOME Menu, then
press the “CLOCK” SELECT.
The Clock Menu appears.
2 Press the “V” SELECT repeatedly until “SIRCS”
appears on the front panel display.
3 Press the “SIRCS” SELECT.
4 Press the “CIS2” (or “CIS3”) SELECT.
The remote code is set to the same one used by RM
SETUP on the remote.
2 Press the “TIME SET” SELECT.
The Time set Menu appears.
Note
You cannot operate the Unit using the remote when the remote
code of the Unit and the remote are different.
Se le ct in g t h e t im e in t e rva l fo r a u t o m a t ic
re t u rn t o t h e Ho m e Me n u
The front panel display automatically returns to the Home
Menu when the selected time has elapsed.
The defalt time setting for the Unit is 30 seconds.
3 Press the “24H” (or the “12H”) SELECT on the Time
set Menu to select the time display mode.
The time display mode toggles between 24H and 12H
as you press the button.
1 Press the “V” SELECT on the HOME Menu, then
press the “SETUP” SELECT.
4 Set the hour and minute using the “HOUR” and the
The Setup Menu appears.
“MIN” SELECT.
5 Press HOME to return to Home Menu.
The time is displayed on the right side of the upper
line on the HOME Menu.
Note
The clock is not displayed when the Unit is in the Edit Menu or
Party mode.
2 Press the “V” SELECT repeatedly until “TIME OUT”
appears on the front panel display.
3 Press the “TIME OUT” SELECT.
4 Press the “30sec,” “5sec,” “10sec,” or “No”
SELECT.
Note
If you select “No,” the front panel display does not return to the
Home Menu automatically.
13US
Pa rt s a n d Co n t ro ls
Chapter 2
Parts and
Controls
This chapter provides you with
information on the parts and controls
of each component, and information
on menu operation.
14US
Ke y o p e ra t io n o n t h e Un it
1 REMOTE SENSOR
9 MUTING (page 20, 22)
Press to mute the speaker output from the Unit, or to
cancel muting when it is set to ON.
2 SPEAKER (for INTERCOM/MONITOR) (page 38, 39)
Receives the sound while INTERCOM or MONITOR
is set to ON.
0 +/– VOLUME (page 38, 39)
Press to adjust the volume of the speaker output from
the Unit.
3 X/1 (POWER) (page 20, 22, 23)
Press to turn the power on/ off.
qa OPEN/CLOSE (page 20, 22, 23)
4 SELECT (page 18)
Press to open/ close the door on the Unit.
Press to select an item on the front panel display, such
as menu items, settings, tracks, etc.
qs MICROPHONE
Picks up the sound while INTERCOM is set to ON.
5 MODE
Press to jump to the Mode Menu of each function.
qd OPERATIONAL BUTTONS (page 20, 22, 23)
6 BACK (page 12, 42)
N(PLAY): Press to play the selected source
X (PAUSE) : Press to pause playback
x (STOP) : Press to stop playback
Press to return to the previous menu or to view the
current status of the disc title list or the Preset station
list.
./ > : Locates a specific track
7 m/M (SCROLL DOWN/UP)
qf Display (page 18)
Press to scroll the LCD menu.
Displays the Home Menu and the Setup Menu, etc.
You can operate the Home Menu and the Setup Menu,
etc., using any SELECT (4).
When you listen to the radio, you can adjust the
frequency by all kinds of tuning.
8 HOME
Continue to the next page
l
Press to return to the Home Menu.
15US
Pa rt s a n d Co n t ro ls (co n t in u e d )
Ke y o p e ra t io n o n t h e re m o t e
RM SETUP TV/VIDEO TV
1
5
9
2
6
0
3
7
4
8
ENTER
BACK
CLEAR
SELECT
MODE
HOME
DOWN
UP
DVD
F
MUTING
TOP MENU
MENU
MASTER VOL
ENTER
f
G
g
O
RETURN
TV VOL
DISPLAY
AUDIO
TV CH
ANGLE
SUBTITLE
DVD SETUP
16US
1 RM SETUP (page 18)
qk ?/1 (page 20, 22, 23)
Press to preset the remote code, and switch between
CIS2/ CIS3.
Press to turn the Unit on/ off.
ql TV ?/1 (page 47)
2 TV/VIDEO (page 47)
Press to turn the Sony TV on/ off.
Press to switch signals between TV input and Video
input for the Sony TV monitor.
w; CLEAR
Press to clear a number which you entered.
3 Numeral buttons
wa ENTER
Press to select a number, representing, for example, a
desired track of the audio source.
Press to set the number you entered using the numeric
buttons.
4 SELECT (page 18)
ws BACK (page 12, 42)
Press to select an item on the front panel display, such
as menu items, settings, tracks, etc.
Press to return to the previous menu or to view the
current status of the disc title list or the Preset station
list.
5 MODE
Press to jump to Mode Menu of each function.
wd m/M (page 21, 25)
6 HOME
Press to locate a portion you want to play within a
track of the source.
Press to return to the Home Menu on the display.
7 DOWN/UP
wf x (STOP) (page 20, 22, 23)
Press to scroll the LCD menu.
When you listen to the radio, you can adjust the
frequency by all kinds of tuning.
Press to stop the current playback.
wg MENU* (page 24)
Press to display a menu while using DVP-NW50.
8 ./> (page 21, 25)
wh MUTING (page 20, 22)
Press to locate a specific track of the source or to select
a preset station.
Press to mute the speaker output from the Unit on/ off.
wj MASTER VOL +/–
9 X (PAUSE)
Press to adjust the volume of the speaker output from
the Unit.
Press to pause the playback of the source.
0 H (PLAY) (page 20, 22, 23)
Press to operate the selected source.
H (PLAY) button has a tactile dot.**
MASTER VOL + button has a tactile dot.**
wk ANGLE (page 26)*
Press to change the viewing angle.
qa TOP MENU* (page 24)
Press to display the top menu while using
DVP-NW50.
wl DVD SETUP (page 27, 28, 29, 30)*
Press to display the Setup display on the TV screen.
e; AUDIO (page 26)*
qs G/ F/f /g*
Press to select the language of the sound track.
Press to select a DVD setup menu on the TV screen.
ea SUBTITLE (page 26)*
qd ENTER*
Press to display subtitles or turn them on/ off.
Press to confirm the selection while using DVP-NW50.
*
Used for operating a DVP-NW50 only
qf RETURN*
** Use the tactile dot as a reference when operating the system.
Press to return to the specified position defined by
DVD or VIDEO CD.
qg DISPLAY* (page 26)
Press to display a search menu.
qh TV VOL +/– (page 47)
Press to adjust the Sony TV volume.
TV VOL + button has a tactile dot.**
qj TV CH +/– (page 47)
Press to change the Sony TV channel.
TV CH + button has a tactile dot.**
Continue to the next page
l
17US
Pa rt s a n d Co n t ro ls (co n t in u e d )
Pre p a rin g t h e re m o t e
Press the A or B SELECT w hile “RM SETUP” is being
pressed on the remote.
I
nsert two R06 (size-AA) batteries into the battery compartment
The default setting is CIS2.
with the + and – correctly oriented to the markings. When using
When you press the A SELECT, remote code is set to
CIS2.
the remote, point it at the IR sensor
on the Unit.
When you press the B SELECT, remote code is set to
CIS3.
Note
You cannot operate the Unit using the remote when the remote
code of the Unit and the remote are different.
Me n u o p e ra t io n
The Home Menu is displayed on the Unit (A).
Using the Home Menu, you can select the sound and
make various adjustments to items.
Notes
• Under normal conditions, the batteries should last for about six
months. When the remote no longer operates the Unit, replace
both batteries with new ones.
• Do not leave the remote in an extremely hot or a humid place.
• Do not drop any foreign object into the remote casing,
particularly when replacing the batteries.
• Do not use a new battery with an old one.
Using any SELECT (B), you can select an item on the
front panel display.
When the item is displayed on the left side, press a
SELECT on the left side.
When the item is displayed on the right side, press a
SELECT on the right side.
• Do not expose the IR sensor to direct sunlight or lighting
equipment. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period
of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Se t t in g a re m o t e co d e o n t h e re m o t e
For example, when you want to select “DVD,” press the
F SELECT.
When you want to see items below those currently
displayed, press the “H” SELECT.
(When there are additional items, “V” is displayed).
When you want to see items above those currently
displayed, press the “G” SELECT.
You can switch the remote code (CIS2 or CIS3) on the
remote. If the remote code of the Unit and the remote are
different, you cannot use the remote to operate the Unit.
Make sure that the remote code of the remote and the Unit
is the same. For details on setting a remote code on the
Unit, see page 13.
(When there are additional items, “v” is displayed).
For details on the Menu tree, see the next page.
RM SETUP TV/VIDEO TV
C Press to jump to the Mode Menu of each function.
D Press to return to the previous menu.
E Press to return to the top menu.
1
5
9
2
6
0
3
7
4
8
ENTER
BACK
CLEAR
SELECT
MODE
HOME
DOWN
UP
18US
Me n u t re e
You can set the following items from Home Menu.
When you press MODE on each of the displays, the Mode Menus shown on the right side appear on the front panel display.
HOME
MODE MENU
CD/DVD/VCD/MP3 (pages 20 to 30)
Track list (CD only)
CD/ DVD PLAYER
CD/DVD
3
*
Play mode - Continue, Shuffle, Repeat
Party mode- On, Off
Party Join/ Quit
TUNER (pages 31 to 33)
Preset station list
4
*
Surround mode
TUNER
Mono/ Stereo
LINE IN (page 34)
Band (FM/ AM)
Party mode- On, Off
Party Join/ Quit
1
*
NETWORK (page 35)
Room list
TRACK LIST (CD only)
4
2
Surround mode*
*
TITLE
Title List
Title List
(All disc play)
2
*
ARTIST
Artist List
Album List
Genre List
LINE IN
2
*
ALBUM
Party mode- On, Off
Party Join/ Quit
Surround mode
2
*
GENRE
Playlist
2
*
Title List
Title List
TITLE
MY MUSIC (page 36)
NETWORK
ARTIST
Artist List
Album List
Play mode- Continue, Shuffle, Repeat
Party mode- On, Off
ALBUM
GENRE
Playlist
Title List
Title List
Party Join/ Quit
Genre List
4
INTERCOM (page 38)
Room list
*
Surround mode
(All room connection)
MY MUSIC
3
*
Play mode - Continue, Shuffle, Repeat
MONITOR (page 39)
Room list
Party mode- On, Off
Party Join/ Quit
Privacy mode- On, Off
4
ALARM
SLEEP
CLOCK (page 40 to 41)
SETUP (pages 43 to 46)
*
Surround mode
TIME SET
1
*
When you select an Unit in the Room list.
When you select a computer in the Room list.
Available play mode is different for disc.
DVD/ VCD/ MP3 : Continue, Repeat
CD : Continue, Shuffle, Repeat
DIMMER
2
*
4
*
DRC
3
*
4
*
TEST TONE
SP. SIZE
4
*
4
*
SP. DISTANCE
4
*
D
VP-NW50 only
DP-NW10 only
4
*
LEVEL
BALANCE
5
*
C
5
*
VOL. PRESET- On, Off
VOL. LEVEL
IR ROUTE- Eye, Jack, Both
INTERCOM PRIVACY- On, Off
INTERCOM RING
MONITOR PRIVACY- On, Off
PARTY PRIVACY- On, Off
SIRCS- CIS2, CIS3
LAN- IP address, Diagnosis
NAME
TIME OUT- 5sec, 10sec, 30sec, No
19US
Pla yin g a CD Disc
Chapter 3
Playing Discs
(CDP-NW10 only)
1 Press X/1 (POWER).
The Unit turns on.
2 Press OPEN/CLOSE to open the door, then place a
disc on the spindle firmly.
This chapter describes how to play a
CD disc or how to play audio in
various modes using the CDP-NW10.
Playback side
facing the Unit
3 Press OPEN/CLOSE.
The door closes.
4 Press the “CD” SELECT on the Home Menu.
The track list appears on the front panel display.
When the Unit has been connected to the Internet via a
computer, the track titles are downloaded from the
Gracenote CDDBR server, and the track titles appear
on the front panel display. You can select and play
back desired tracks from these lists. When the Unit is
not connected to a computer or your computer is not
connected to the Internet, only “TRACK1,”
“TRACK2,” etc., appear on the front panel display.
5 Press N.
When CD information is downloaded from Gracenote
CDDBR, you can also press the “TRACK” SELECT.
To st o p p la yin g a d isc
Press x.
Ad d it io n a l o p e ra t io n s
To
Press
Mute the sound
MUTING. To cancel muting,
press it again or press VOLUME +
to adjust the sound volume.
Select a track number
Numeric buttons (0-9).
When the track number
is between 1 and 9:
press the corresponding numeric
button, then press N.
When the track number is
10 or higher:
press the corresponding numeric
buttons in sequence.
e.g.: Playback of the 14th track
Press 1 t 4 in order.
Note
If there is no disc in the Unit or a disc that cannot be read by the
Unit, “NO DISC” appears on the front panel display.
20US
Ab o u t t h e p la yb a ck ra n g e
Va rio u s p la y m o d e fu n ct io n s
(Sh u ffle p la y, Re p e a t p la y)
Press “REP-OFF” (repeat off), “REP1” (repeat one), or “REP”
(repeat all) SELECT repeatedly on Mode Menu.
The playback range may be different depending on the play
mode.
Sh u ffle p la y
You can play back tracks in random order.
SHUF (shuffle)
1
Press MODE on the CD display.
If you select
Plays
The Mode Menu appears.
“REP-OFF”
All tracks on a disc
randomly once.
“REP1”
A single track repeatedly.
“REP”
All tracks on a disc play
repeatedly.
CONT (continue)
If you select
“REP-OFF”
2
3
Press the “SHUF” SELECT.
Plays
“SHUF” is highlighted.
All tracks on a disc play
once.
Press N to start Shuffle play.
Shuffle Play starts.
“REP1”
A single track repeatedly.
Re p e a t p la y
1 Press MODE on the CD display.
“REP”
All tracks on a disc play
repeatedly.
The following display appears.
Se a rch in g fo r a p a rt icu la r p o in t o n a d isc
(Se a rch /Sca n )
You can quickly locate a particular point on a disc.
2
Press the A SELECT repeatedly.
To lo ca t e a p o in t q u ickly u sin g t h e p re vio u s/n e xt
b u t t o n s (Se a rch )
You can search for the next or previous track using ./
> on the Unit.
Repeat play starts from the selected track.
Each time you press the button, the play mode
changes as shown below.
Press . or > lightly once to go to the next or
REP-OFF t REP1 t REP
previous track during playback.
To lo ca t e a p o in t q u ickly b y p la yin g a d isc in fa st
fo rw a rd o r fa st re ve rse (Sca n )
1
2
Press m or M during playback on the remote.
When you find the point you want to play back
while scanning, press N to return to normal speed.
Fast forwarding or reversing stops and returns to the
normal playback when the track goes to the next track
or previous track.
21US
Pla yin g a CD Disc
Chapter 4
Playing Discs
(DVP-NW50 only)
1 Press X/1 (POWER).
The Unit turns on.
2 Press OPEN/CLOSE to open the door, then place a
disc on the spindle firmly.
This chapter describes how to play
CD or DVD discs, and the settings
and functions related to a DVD
player.
Playback side
facing the Unit
3 Press OPEN/CLOSE.
The door closes.
4 Press the “DVD” SELECT on the Home Menu.
The track list appears on the front panel display.
When the Unit has been connected to the Internet via
a computer, the track titles are downloaded from the
Gracenote CDDBR server, and the track titles appears
on the front panel display. You can select and play
back desired tracks from these lists. When the Unit is
not connected to a computer or your computer is not
connected to the Internet, only “TRACK1,”
“TRACK2,” etc., appear on the front panel display.
5 Press N.
When CD information is downloaded from Gracenote
CDDBR, you can also press the “TRACK” SELECT.
To st o p p la yin g a d isc
Press x twice.
Ad d it io n a l o p e ra t io n s
To
Press
Mute the sound
MUTING. To cancel muting,
press it again or press +VOLUME
to adjust the sound volume.
Select a track number
Numeric buttons (0-9).
When the track number
is between 1 and 9:
press the corresponding
numeric button, then press N.
When the track number is
10 or higher:
press the corresponding
numeric buttons in sequence.
e.g.: Playback of the 14th track
Press 1 t 4 in order.
Note
If there is no disc in the Unit or a disc that cannot be read by the
22US
Unit, “NO DISC” appears on the front panel display.
Pla yin g a DVD/VCD/MP3
Disc
Depending on the disc used, some operations may be
different or restricted.
For details, refer to the instructions supplied with your
disc.
Va rio u s p la y m o d e fu n ct io n s
(Sh u ffle p la y, Re p e a t p la y)
Sh u ffle p la y
1 Turn on your TV.
You can play back tracks in random order.
1
Press MODE on the CD display.
2 Press X/1 (POWER).
The Mode Menu appears.
The Unit turns on.
3 Sw itch the input selector on your TV so that the
signal from the Unit appears on the TV screen.
4 Press OPEN/CLOSE on the Unit, and place a disc on
the disc spindle firmly.
2
3
Press the “SHUF” SELECT.
“SHUF” is highlighted.
Press N to start Shuffle play.
Shuffle Play starts.
Playback side
facing the Unit
Re p e a t p la y
1 Press MODE on the CD display.
The following display appears.
2
Press the A SELECT repeatedly.
5 Press OPEN/CLOSE.
Repeat play starts from the selected track.
Each time you press the button, the play mode
changes as shown below.
The door closes.
6 Press the “DVD” on the Home Menu.
7 Press N.
REP-OFF t REP1 t REP
The Unit starts playback.
Adjust the volume on the Unit.
Ab o u t t h e p la yb a ck ra n g e
Depending on the disc, a menu may appear on the TV
screen, and playback may start automatically even if
you do not press N.
Press “REP-OFF” (repeat off), “REP1” (repeat one), or “REP”
(repeat all) SELECT repeatedly on Mode Menu.
The playback range may be different depending on the play
mode.
For DVD VIDEOs and VIDEO CDs, see page 24.
SHUF (shuffle)
To st o p p la yin g t h e d isc
If you select
Plays
Press x twice.
“REP-OFF”
All tracks on a disc
randomly once.
To re su m e p la yb a ck fro m t h e p o in t w h e re yo u
st o p p e d t h e d isc
“REP1”
A single track repeatedly.
“REP”
All tracks on a disc play
repeatedly.
1
2
Press x during playback.
Press N.
The Unit starts playback from the point where you
stopped the disc in step 1.
CONT (continue)
If you select
“REP-OFF”
Plays
All tracks on a disc play
once.
Continue to the next page
l
“REP1”
A single track repeatedly.
“REP”
All tracks on a disc play
repeatedly.
23US
Pla yin g a DVD/VCD/MP3 Disc (co n t in u e d )
Re p e a t p la y
Usin g t h e DVD´s m e n u
1
Press MODE on the DVD display.
The following display appears.
A DVD is divided into long sections of a movie or a music
feature called “titles.”
When you play DVDs which contains several titles, you
can select the title using the TOP MENU on the remote.
When you play DVDs that allow you to select items such
as language for the sound and subtitles, select these items
using the MENU on the remote.
1 Press TOP MENU or MENU on the remote.
The disc menu appears on the TV screen.
2
Press the A SELECT repeatedly.
When playing a DVD
The contents of the menu differ from disc to disc.
If you select
“REP-OFF”
“REP-CHAP”
“REP-TITL”
“REP”
Plays
2 Press F/f on the remote to select the item you
All tracks on a disc once.
A single chapter repeatedly.
A single title repeatedly.
w ant to play or change.
3 Press ENTER on the remote.
All chapters on a disc
repeatedly.
Pla yin g VIDEO CDs w it h PBC fu n ct io n s
(VIDEO CD Ve r. 2.0 o r h ig h e r )
When playing a MP3 file
If you select
PBC (PlayBack Control) allows you to play VIDEO CDs
interactively by following the menu on the TV screen.
Plays
1 Press N.
“REP-OFF”
All MP3 files in the current
folder once.
If you insert a VIDEO CD (Ver.2.0 or higher), the
VIDEO CD starts playing with PBC functions.
The menu used by your selection appears.
“SINGLE”
“REP1”
“REP”
The current MP3 file once.
The current MP3 file repeatedly.
2 Press the numeric buttons on the remote to select
All MP3 files in the current
folder repeatedly.
the item number you w ant.
3 Press ENTER on the remote.
When playing a VIDEO CD (Ver. 1.1) without PBC functions
4 Follow the instructions on the menu for interactive
operations.
If you select
“REP-OFF”
“REP1”
Plays
All tracks on a disc once.
A single track repeatedly.
All tracks on a disc repeatedly.
Refer to the instructions supplied with the disc, as the
operating procedure may differ, depending on the
VIDEO CD.
“REP”
Note
3
Press N to start Repeat Play.
Repeat Play starts.
Depending on the VIDEO CD, “Press ENTER on the remote” in
step 3 may appear as “Press SELECT” in the instructions
supplied with the disc, In this case, press N.
Note
When you play a VIDEO CD (Ver. 2.0) with PBC functions,
repeat play does not work.
24US
Se a rch in g fo r a Sce n e
Pla yin g a n MP3 a u d io t ra ck
Se a rch in g fo r a p a rt icu la r p o in t o n a d isc
(Se a rch /Sca n )
You can play MP3 audio tracks on CD-ROMs, CD-Rs, or
CD-RWs. However, the discs must be recorded according
to ISO9660 level 1, or Joliet format for the Unit to
recognize the tracks.
You can quickly locate a particular point on a disc by
monitoring the picture or playing it back slowly.
Note
Depending on the disc, you may not be able to do some of the
1
Insert a data disc recorded in MP3 format into the Unit.
A folder list is displayed on the TV screen.
operations described here.
To lo ca t e a p o in t q u ickly u sin g t h e p re vio u s/n e xt
b u t t o n s (Se a rch )
You can search for the next or previous chapter, track, or
scene using ./ > on the Unit.
Press . or > lightly once to go to the next or
previous chapter/track/scene during playback.
To lo ca t e a p o in t q u ickly b y p la yin g a d isc in fa st
fo rw a rd o r fa st re ve rse (Sca n )
2 Press F/f to select the folder you w ant to play,
then press ENTER on the remote.
1
2
Press m or M during playback on the remote.
When you find the point you want to play back
while scanning, press N to return to normal speed.
Fast forwarding or reversing stops and returns to the
normal playback when the track goes to the next track
or previous track.
File list is appears under the folder.
Each time you press m or M while scanning, the
scanning speed changes. With each press, the indication
changes as shown below. Actual speeds may differ
between discs.
Playback direction
x2M t x4M t x8 M t x16Mt x32M
3 Press F/f to select the file you w ant to play, then
press ENTER on the remote.
N(PLAY)
The Unit starts playing the first MP3 audio track on the
disc.
Opposite direction
Notes
x2m t x4m t x8m t x16mt x32m
• The Unit can play MP3 (MPEG1 Audio Layer3) audio. The Unit
cannot play audio tracks in MP3PRO format.
• If an MP3 file of VBR (variable bit rate) is played, indicated the
elapsed time may be different from the actual time.
• If you add the extension “.MP3” to data that is not in MP3
format, the Unit cannot recognize the data properly and will
generate a loud noise which could damage your speakers.
• You can enter up to 50 characters as a file name including an
extension.
N(PLAY)
Se a rch in g fo r a t it le /ch a p t e r/t ra ck, e t c.
(Se a rch m o d e )
You can search a DVD by title or chapter, and you can
search a VIDEO CD by track. As titles and tracks are
assigned unique numbers on the disc, you can select the
desired one by entering its number.
• A file or folder name that is not based on the ISO level 1 or
Joliet format may not be displayed properly.
• The total number of file or folder names should be 128, or
fewer.
• There should be no more than 128 levels in the folder tree.
• Do not use characters such as <, >, &, | , “, / , ?, , ’, \ , :, etc.
*
Continue to the next page
l
25US
Se a rch in g fo r a sce n e (co n t in u e d )
Usin g Va rio u s Ad d it io n a l
Fu n ct io n s
1 Press DISPLAY on the remote.
The following display appears. The number in
parentheses indicates the total number of titles, tracks,
etc., of the disc.
The following operations are set up using the remote
while looking at a TV screen.
Se le ct in g t h e a u d io
Switches the language of the sound track.
Press AUDIO on the remote w hile playing a disc.
Each time you press AUDIO on the remote, the language
of the sound track changes.
Note
Press G /g/F/f repeatedly to select a search
Depending on the DVD VIDEO, you cannot change the audio
setting even if multilingual audio are recorded on the disc. In this
case, use the DVD’s menu (page 24).
method on the remote.
When playing a DVD VIDEO/DVD-RW
TITLE
CHAPTER
Se le ct in g t h e su b t it le s
When playing a VIDEO CD
TRACK
If subtitles are recorded on the disc, you can change the
subtitles, or display or hide them whenever you want,
while playing a DVD.
3 Select the number of the title, chaper, track, time
code, etc. you w ant by pressing the numeric
buttons to select the digit.
Press SUBTITLE on the remote w hile playing a disc.
Each time you press SUBTITLE on the remote, the subtitle
of the DVD changes.
The Unit starts playback from the selected number or
time.
If you want to hide the subtitle from the TV screen,
press SUBTITLE on the remote until the display shows
SUBTITLE OFF on the TV screen.
To t u rn o ff t h e d isp la y
Press DISPLAY on the remote repeatedly until the
display is turned off.
Note
Notes
Depending on the DVD VIDEO, you cannot change subtitles
even if multilingual subtitles are recorded on the disc. In this
case, use the DVD’s menu (page 24).
• The title, chapter, or track number displayed is the same
number as that of recorded on the disc.
• You cannot search for a scene on a DVD+RW using the time
code.
Se le ct in g t h e a n g le
You can change the angles even if various angles (multi-
angles) for a scene are recorded on the DVD VIDEO.
When “Angle Mark” is set to “ON” in the setup display,
angle mark is displayed on the TV screen (page 29).
Press ANGLE on the remote w hile playing a disc.
Each time you press ANGLE on the remote, the angle of
the DVD changes.
26US
5 Enter or re-enter your 4-digit passw ord using the
numeric buttons, then press ENTER on the remote.
When the level is not changed, the display does not
appear.
Pa re n t a l co n t ro l (lim it e d p la yb a ck)
The following operations are set up using the remote
while looking at a TV screen.
The “PARENTAL CONTROL” function allows you to set
a playback limitation level.
To t u rn o ff t h e p a re n t a l co n t ro l fu n ct io n
Playback of some DVD VIDEOs can be limited according
to a predetermined level, such as the age of the users.
1
Press F/f to select “OFF” in step 4 above, then press
ENTER on the remote.
1 Press DVD SETUP on the remote w hen the Unit is in
stop mode.
2
Enter your 4-digit password using the numeric
buttons, then press ENTER on the remote.
The Setting Menu appears.
To p la y a d isc fo r w h ich p a re n t a l co n t ro l is se t
1
2
Insert the disc for which Parental Control is set.
Enter your 4-digit password using the numeric
buttons, then press ENTER on the remote.
The Unit is ready for playback.
To ch a n g e t h e p a ssw o rd
1
Press F/f to select “Password” on the Preference
Display, then press ENTER on the remote.
2
“Change” is highlighted, then press ENTER on the
remote.
The display used for entering the password appears.
2 Press G/g to select
(Preference,) then press
ENTER or f on the remote.
The options for “Preference” appear.
3
Enter your 4-digit password using numeric buttons
on the remote.
3 Press F/f to select “Parental,” then press ENTER or
f on the remote.
4
Enter a new 4-digit password using numeric buttons
on the remote.
The items for “Parental level” are displayed.
4 Press F/f to select level items, then press ENTER on
the remote.
The lower the value, the stricter the limitation.
Continue to the next page
l
27US
Usin g Va rio u s Ad d it io n a l Fu n ct io n s
(co n t in u e d )
Usin g t h e Se t u p Disp la y
(DVD Se t t in g s)
5
To confirm your password, re-enter the new 4-digit
password using the numeric buttons on the remote.
If you make a mistake entering your password,
re-enter your correct password.
By using the Setup Display, you can make various
adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup Display.
For details on each Setup Display item, see pages from 28
to 30.
Se t t in g t h e d isp la y (Ge n e ra l Se t u p )
Choose settings according to the TV to be connected.
1 Press DVD SETUP on the remote w hen the Unit is in
stop mode.
The Setting Menu appears.
6
Press ENTER on the remote.
2 Press G/g to select
(General Setup,) then press
ENTER or f on the remote.
Tip
If you forget your password, or the first time you change the
password, enter the 4-digit number “9703” as old password using
the numeric buttons.
The options for “General Setup” appear.
Notes
• When you play discs which have the parental control function,
playback of the disc is limited on the Unit.
• Depending on the disc, you may be asked to enter your
password when playback starts. In this case, enter the
password.
3 Press F/f to select an option, then press ENTER on
the remote.
The options for the selected item appear.
4 Press F/f to select an item, then press ENTER on
the remote.
TV Type
Select the color system of the TV to be connected.
The setup may be different in depending on regions or
countries.
The default setting is underlined.
NTSC
PAL
Outputs the NTSC color system.
Outputs the PAL color system.
AUTO
Outputs the color system that is recorded
on the disc.
28US
TV Display
Se t t in g t h e la n g u a g e a n d p la yb a ck
re st rict io n (Pre fe re n ce )
Selects the aspect ratio of the connected TV screen (4:3
standard or wide).
Depending on the disc, “Normal/ LB” may be selected
automatically instead of “Normal/ PS” or vice versa.
The default setting is underlined.
Choose settings according to the TV to be connected.
1 Press DVD SETUP on the remote w hen the Unit is in
stop mode.
The Setting Menu appears.
Normal/ PS
(4:3 PAN SCAN)
2 Press G/g to select
(Preference,) then press
ENTER or f on the remote.
The options for “Preference” appear.
Select this when you connect a 4:3
screen TV. Automatically displays
a wide picture on the entire screen
and cuts off the portions that do not fit.
Normal/ LB
(4:3 LETTER BOX)
Select this when you connect a 4:3 screen
TV. Displays a wide picture with bands
on the upper and lower portions of the
screen.
3 Press F/f to select an option, then press ENTER on
the remote.
The options for the selected item appear.
16:9 Wide
Select this when you connect a wide-
screen TV or a TV with a wide mode
function.
Angle Mark (page 26)
When you select “ON,” and various angles (multi-angles)
for a scene are recorded on the DVD VIDEO, an angle
mark is displayed on the TV screen.
The default setting is “ON.”
4 Press F/f to select an item, then press ENTER on
the remote.
Audio (page 26)
Switches the language of the sound track.
OSD Lang (On-Screen Display Language)
Switches the display language on the screen.
Subtitle (page 26)
Switches the language of the subtitle.
Captions
The hidden subtitle is displayed or turn off.
The default setting is “ON.”
Disc Menu
Select the desired language for the disc menu.
Screen Saver
Parental (page 27)
The screen saver image appears when you leave the Unit
in pause or stop mode for five minutes. The screen saver
will help prevent your display device from becoming
damaged (ghosting). Press any button to turn off the
screen saver.
Playback of some DVD VIDEOs can be limited according
to a predetermined level, such as the age of the users.
Password (page 27)
Set the 4-digit password in parental control.
The default setting is underlined.
ON
Turns on the screen saver.
Turns off the screen saver.
Continue to the next page
OFF
l
29US
Usin g t h e Se t u p Disp la y (DVD Se t t in g s) (co n t in u e d )
Default (this page)
4
Select “Reset,” then press ENTER on the remote.
All the settings explained on pages from 28 to 29 return
to the default settings. Do not press X/ 1 (POWER)
while resetting the Unit. It may take a few seconds to
complete.
All the settings explained on pages from 28 to 29 return to
the default settings.
Tip
If you select “OTHERS” in “Audio,” “Subtitle,” or “Disc Menu,”
select and enter a language code from the language code list
(page 55) using the numeric buttons.
To re se t a ll o f t h e se t t in g s
1
2
3
Press DVD SETUP on the remote when the Unit is in
stop mode.
The Setting Menu appears.
Press G/g to select
(Preference,) then press
ENTER on the remote.
The options for “Preference” appear.
Press F/f to select “Default,” then press ENTER on
the remote.
30US
List e n in g t o t h e Ra d io
Chapter 5
You can tune in stations on the Unit by preset tuning or
manual, automatic, or direct tuning.
Enjoying Radio
and Other
Component
List e n in g t o a p re se t st a t io n
Preset FM/ AM radio stations in the Unit’s memory first.
For details on how to preset radio stations in the Unit, see
page 33.
This chapter describes how to receive
FM/ AM stations, and listen to sound
from a component connected to LINE
IN using the Unit.
1 Press “TUNER” SELECT on the Home Menu.
The display changes to the Tuner display, then the
Preset station list appears.
2 Press any SELECT.
The display changes to the current station display.
List e n in g t o a n o n -p re se t st a t io n
1 Press the “TUNER” SELECT on the Home Menu.
The display changes to the Tuner display, then the
Preset station list appears.
Continue to the next page
l
31US
List e n in g t o t h e Ra d io (co n t in u e d )
Tip
2 Press MODE to sw itch the band to AM (or FM).
You can tune in the station in 100 kHz steps for the FM band and
10 kHz steps for the AM band.
The Tuner mode Menu appears.
Notes
• When you press the “8” or “9” numeric button, the number
appears in the second entry position.
• When you enter invalid numbers, the direct tuning is cancelled
and the screen returns to the current station display.
• Tuning interval for direct tuning is:
FM: 78.50 MHz to 108.00 MHz
3
Press the “AM” (or “FM”) SELECT, then press
BACK.
AM: 530 MHz to 1710 MHz
The display returns to the current frequency.
4 Press any SELECT.
The display changes to the current frequency.
5 Press DOWN/UP on the remote to adjust the
frequency.
DOWN/ UP
Changes the current frequency to
a frequency 1 step lower or higher.
(Manual tuning)
DOWN/ UP
(press and hold)
Scans a particular station toward a
lower or higher frequency. Scanning
stops automatically when the station
is tuned in. (Automatic tuning)
Wh e n yo u kn o w t h e fre q u e n cy o f t h e st a t io n
Press the numeric buttons on the remote to enter the
frequency (Direct tuning).
Example: FM 105.70 MHz
1 t 0 t 5 t 7 t 0
32US
Pre se t t in g Ra d io St a t io n s
Na m in g t h e Pre se t St a t io n s
After you have tuned in stations using direct tuning or
Automatic tuning, you can preset them to the Unit.
Up to 20 FM or AM stations can be preset.
You can edit the name of the preset stations in the Preset
station list.
1 Press the “TUNER” SELECT on the Home Menu.
The display changes to the Tuner display, then the
Preset station list appears.
1 Press “TUNER” SELECT on the Home Menu.
The display changes to the Tuner display, then the
Preset station list appears.
2 Press and hold any SELECT of the station of w hich
you w ant to edit the name.
2 Press any SELECT that corresponds to the station
you w ant to tune in.
The display changes to the Text edit display.
3 Enter the name in the text box using the function
The display changes to the current station display.
SELECT.
3 Tune in to the station that you w ant to preset
See the table below for details on the function of each
of the buttons.
(page 31).
4 Press the “MEM” (memory) SELECT to enter your
A Moves the cursor to the left in the text being edited
(Text Edit).
selection.
B Changes characters in reverse alphabetical order.
C Clears the character on which the cursor is placed
in the text being edited (Text Edit).
D Cancels editing and returns to the Preset station
list.
E Moves the cursor to the right in the text being
edited (Text Edit).
F Changes characters in alphabetical order.
G Enters the selected character into the text box.
H Stores the name and returns to the Preset station
list.
4 Press the “RETURN” SELECT.
The name of the preset station is stored, then the
display returns to the Preset station list.
33US
List e n in g t o So u n d fro m a
Co m p o n e n t Co n n e ct e d t o LINE IN
You can listen to music from an external source if the Unit
is connected to another playback component, such as a CD
changer, etc.
1 Press the “LINE IN” SELECT on the Home Menu.
The LINE IN display appears.
2 Play back the component connected to the Unit.
The sound from the component is output via the Unit.
You can adjust the volume of the Unit with + VOLUME
and – VOLUME on the Unit.
To e d it t h e n a m e o f t h e LINE IN so u rce
You can change “LINE IN” to something more recognizable
and have it displayed on the front panel display.
1
Press and hold the “LINE IN” SELECT.
The Text edit Menu appears.
2
Enter the name in the editing text box using the
SELECT.
See “Naming the Unit” on page 12 for details on how to
enter characters.
34US
Pla yin g Mu sic o n Ot h e r
Un it s
You can play back and share the music content in all Units
and computers via an Ethernet cable. There are two types
of source used to play back music content. One is
“NETWORK,” and the other is “MY MUSIC.”
Chapter 6
Using the
System Network
If a computer is connected to the Internet, you can get the
CD information from the Gracenote CDDBR server.
This chapter describes how to use
network functions among Units and
computers, etc. You can enjoy music,
and use the intercom and the monitor
function connecting each of the Units
via an Ethernet cable.
Pla yin g b a ck m u sic fro m “ NETWORK”
When you select “NETWORK,” audio CDs on other Units
and MP3-format music files on your computer are played
back.
1 Press the “NETWORK” SELECT on the Home Menu.
The Room list appears.
2 Press any SELECT to select a Unit or a computer.
If the source you select is allocated to a Unit, the Track
list appears.
If the source you select is allocated to a computer, the
Browse Menu appears. Go to step 2 in “Playing back
music from “MY MUSIC” on page 36.
3 Press any SELECT to select a track to be played
back.
The playback display appears, and playback starts.
Notes
• Each Unit appears with an original name if you have changed
the name of the Unit. See “Naming the Unit” on page 12 for
details on how to change the names of Units.
• When using network music, some of the functions or the access
to the other Units are restricted.
• Some music files stored on the hard disk of your computer may
not be able to be played back on the Unit. For example,
depending on file format, some music files may not be played
back on the Unit.
Continue to the next page
l
35US
Pla yin g Mu sic o n Ot h e r Un it s (co n t in u e d )
Pla yin g b a ck m u sic fro m “ MY MUSIC”
Va rio u s p la y m o d e fu n ct io n s
(Sh u ffle p la y, Re p e a t p la y)
When you select “MY MUSIC,” audio CDs in other Units
and MP3-format music files from your computers are
played back.
“NETWORK” and “MY MUSIC” have two play modes.
Sh u ffle p la y
You can play back tracks in random order.
For details on “Shuffle play” see page 21.
When the Unit has been connected to the Internet via a
computer, CD information, such as artist name, album
and track titles, or genre, are downloaded from the
Gracenote CDDBR server, and sorted into “TITLE,”
“ARTIST,” “ALBUM,” and “GENRE.” These information
appear on the front panel display.
Re p e a t p la y
For details on “Repeat play” see page 21.
You can select and play back desired tracks from these
lists. When the Unit is not connected to a computer or
your computer is not connected to the Internet, only
“TRACK1,” “TRACK2,” etc., appear on the front panel
display.
Tip
If you select “ALL DISC” during NETWORK playback, the Unit
plays tracks on the disc randomly. When the disc finishes, it
selects the next disc to be played back at random.
1 Press the “MY MUSIC” SELECT on the Home Menu.
The Browse list appears.
2 Press any SELECT to select a list from “TITLE,”
“ARTIST,” “ALBUM,” “GENRE,” or “PLAYLIST.”*
The selected list appears.
If you select “TITLE,” a Track list appears. Skip to step
4.
* If you press “TITLE,” “ARTIST,” “ALBUM” or “GENRE”
SELECT, each list is sorted and appears based on the CDDB
information. If you press “PLAYLIST” SELECT, the playlist
registered using the Utility In-Wall Unit software on the
computer appears.
3 Press any SELECT to select an artist, genre, or a
playlist title according to the list you select in step
2.
4 Press any SELECT to select a track to be played
back.
The playback display appears, and playback starts.
36US
En jo yin g Mu sic in All Ro o m s
Sim u lt a n e o u sly (Pa rt y m o d e )
Using the Party mode function, you can share the music
content among multiple Units simultaneously. You can
also exclude a selected room from the Party mode (Party
Privacy).
Source and play modes available in the Party mode are
the following:
Exclu d in g t h e Un it fro m a Pa rt y m o d e
(Pa rt y Priva cy)
If you set the Party Privacy in a selected Unit, you can
operate that Unit individually even if other Unit is in the
Party mode.
The setting is retained even if you turn off the Unit.
• NETWORK/ MY MUSIC
– CDs inserted into Units in which the Party Privacy is
set to off.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
– MP3-format music files stored on the hard disc drive
of a computer.
The Setup Menu appears.
• CD/ DVD
– CDs (when using a CDP-NW10)
– CDs, Data CDs (MP3) (when using a DVP-NW50)
• A device connected via LINE IN
– Sound output from a device connected via LINE IN.
• Tuner
– A station currently tuning in.
2 Press the “PRIVACY” SELECT.
“PRIVACY” is highlighted.
The Unit enters the Party Privacy mode.
1 Press MODE after selecting a source on the Home
Tips
Menu.
• When you want to join the Party mode, press MODE, then the
“JOIN” SELECT on the Mode Menu. If the Unit has already
joined in the Party mode, “QUIT” is displayed on the Mode
Menu.
The Mode Menu appears.
e.g.
• When you want to quit the Party mode, press MODE, then the
“QUIT” SELECT on the Mode Menu. If the Unit has not joined
in the Party mode, “JOIN” is displayed on the Mode Menu.
When you press MODE
w hile playing a CD.
2 Press the “PARTY” SELECT.
“Party” appears on the right side of the top line on the
front panel display.
The Unit enters the Party mode, and music is output
to the rooms.
Tip
In the Party mode, some playback operations such as stop, play,
etc., are operable on all of the Units.
To ca n ce l t h e Pa rt y m o d e
You can cancel the Party mode from any of the Units even
if the Unit is not in the Party mode.
Press the highlighted “PARTY” SELECT on the Mode
Menu using the same procedure you used when you
activate the Party mode.
37US
Ta lkin g w it h Pe rso n s in
Ot h e r Ro o m s (INTERCOM)
You can talk with person in any room using the Intercom
function. While INTERCOM is set to ON, the internal
speaker is activated and speakers connected to the Unit
are muted. The streaming on the network stops until the
intercom connection is terminated on both of the sending
and receiving rooms.
To a d ju st t h e sp e a ke r le ve l d u rin g INTERCOM
The volume of the INTERCOM function is independent
from that in audio control.
Adjust the volume with + VOLUME and – VOLUME on
the Unit while the INTERCOM connection is established.
1 Press the “INTERCOM” SELECT on the Home Menu.
Exclu d in g a Un it fro m INTERCOM
(In t e rco m Priva cy)
The Room list appears.
Any room in which the Intercom Privacy is set to ON,
does not receive the Intercom signal.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press any SELECT to select the room you w ant to
contact.
2 Press the “V” SELECT repeatedly until “INTERCOM
PRIVACY” appears on the front panel display.
If the room you want to contact is not displayed on the
front panel display, press the “V” SELECT to display
the next page.
The INTERCOM display appears, and connection is
established after the receiving room answers.
3 Press the A or B SELECT to activate Intercom
Privacy mode.
“PRIVACY” is highlighted and the Intercom Privacy is
set to ON.
A
B
Press the A or B SELECT to exit the Intercom Privacy.
3 To cancel the intercom connection, press the “OFF”
SELECT on the Intercom display.
Ch a n g in g t h e ca ll so u n d o f t h e INTERCOM
To a n sw e r INTERCOM
You can change the call sound heard when the room
receives an intercom signal.
Press the “ANSWER” SELECT in the receiving room.
1 Press the “V” SELECT on the Home Menu, then
press “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “INTERCOM
RING” appears on the front panel display.
3 Press the A or B SELECT to select the sound.
Notes
• If there is no answer from the room you are trying to contact,
the connection is terminated automatically in 10 seconds.
• Connection between rooms terminates automatically 30
seconds after the receiving room answers.
A
B
• Connection can be terminated by pressing the “OFF” SELECT
from either the sending or receiving room.
• A Unit can call up all the rooms using the INTERCOM
function, but only one room can answer the call. Connections to
rooms other than the answering room are disconnected.
38US
Mo n it o rin g Ot h e r Ro o m s
(MONITOR)
You can monitor other rooms via the Unit. While
MONITOR is set to ON, the internal speaker is activated
and speakers connected to the Unit are muted. The
streaming on the network stops until the monitor
connection is terminated on the both of monitoring and
monitored Units.
Exclu d in g a Un it fro m MONITOR
(Mo n it o r Priva cy)
You cannot monitor a room, for which the Monitor
Privacy is set to ON.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
1 Press the “V” SELECT on the Home Menu, then
press “MONITOR” SELECT.
The Setup Menu appears.
The Room list appears.
2 Press the “V” SELECT repeatedly until “MONITOR
PRIVACY” appears on the front panel display.
3 Press the A or B SELECT to activate Monitor
Privacy mode.
“PRIVACY” is highlighted and the Monitor Privacy
mode is set to ON.
2 Press any SELECT to select the room you w ant to
monitor.
A
B
If the room you want to monitor is not displayed on
the front panel display, press the “V” SELECT to
display the next page.
The Monitoring display appears, and a connection
with the room is established.
Press the A or B SELECT again to exit the Monitor
Privacy.
3 To cancel monitoring, press the “OFF” SELECT.
Note
Monitoring continues until MONITOR is canceled.
To a d ju st t h e sp e a ke r le ve l d u rin g MONITOR
The volume of the Monitor function is independent from
that in audio control.
Adjust the volume with + VOLUME and – VOLUME on
the Unit while MONITOR connection is established.
39US
Se t t in g t h e Ala rm
Chapter 7
You can set the Unit to turn on automatically at a
specified time.
Setting the
Timer
1 Press the “V” SELECT on the Home Menu, then
press the “CLOCK” SELECT.
The Clock Menu appears.
This chapter provides you with
information on setup of the timer.
2 Press the “ALARM” SELECT.
The Alarm set Menu appears.
3 Check to see if the desired source for the alarm is
selected and displayed in the upper right on the
front panel display. If not, press the “FUNC” SELECT
repeatedly to select a source.
The playback source changes as shown below.
CD/ DVD t TUNER t LINE
4 Set the hour and minute w ith the “HOUR” and
“MIN” SELECT.
5 Press the “ON” SELECT.
The default setting is “OFF.”
The alarm is set up, and “ON” is displayed.
6 Press X/1 (POWER) to turn off.
To se t t h e a la rm “ OFF”
Press the “OFF” SELECT in step 5.
40US
Se t t in g t h e Sle e p Tim e r
You can set the Unit to turn off automatically at a
specified time.
1 Press the “V” SELECT on the Home Menu, then
press the “CLOCK” SELECT.
The Clock Menu appears.
2 Press the “SLEEP” SELECT.
The Sleep timer Menu appears.
3 Press the “SELECT” SELECT.
Each time you press the button, the time changes as
shown below.
OFF t 1:30 t 1:00 t 0:30
41US
Usin g t h e Se t u p Disp la y
Chapter 8
Other
Functions
You can set up the sound on the Unit.
Se le ct in g t h e su rro u n d m o d e
(DVP-NW50 o n ly)
1 Press MODE on the DVD display.
This chapter describes the setup of the
front panel display, sound field, and
speakers.
The following display appears.
2 Press the “SURR” SELECT.
The following display appears.
3 Press any SELECT to select the desired surround
mode from the follow ing selections.
See the explanations given for each item in the
following section.
2CH STEREO (2CH)
Outputs the sound from the front left and right speakers
only. Standard two channel (stereo) sources completely
bypass any processing. Multi channel surround formats
are downmixed to two channels.
A.F.D. (AUTO FORMAT DIRECT)
Surround mode is decoded as it is recorded on the disc,
without adding any effects (e.g. reverbertaion).
DOLBY PL (Dolby Pro Logic)
Performs Dolby Pro Logic decoding. A source recorded in
2 channels is decoded into 4 channels.
DOLBY PL II (Dolby Pro Logic II)
Performs Dolby Pro Logic II Movie decoding. This setting
is ideal for movies encoded in Dolby Surround. In
addition, this mode can reproduce sound in 5.1 channel
when watching videos of old movies or with dubbed
language.
To re t u rn t o t h e p re vio u s d isp la y
Press BACK.
Note
When an input signal (e.g., multi channel, etc.) other than from a
2 channels source is input, “DOLBY PL” and “DOLBY PL II” are
decoded into “A.F.D.”
42US
Ad ju st in g t h e co n t ra st o f t h e fro n t p a n e l
d isp la y (DIMMER)
Ad ju st in g t h e fro n t sp e a ke r b a la n ce
(BALANCE) (CDP-NW10 o n ly)
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
The Setup Menu appears.
2 Press the “DIMMER” SELECT to activate DIMMER.
“ON” and “OFF” are toggled as you press the
“DIMMER” SELECT.
2 Press the A or B SELECT to adjust the front
speaker balance betw een the left and right
speakers.
The default setting is “OFF.”
The balance can be adjusted ±8 steps in left and right
position.
Pre se t t in g t h e vo lu m e w h e n t h e p o w e r is
t u rn e d o n (VOL PRESET)
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “VOL.
PRESET” appears on the front panel display.
3 Press the “VOL. PRESET” SELECT to activate VOL.
PRESET.
“ON” and “OFF” are toggled as you press the “VOL.
PRESET” SELECT.
The default setting is “OFF.”
4 Adjust the volume by pressing the A or B SELECT.
The volume increases or decreases by 1(vol) step as
you press the A or B SELECT.
The default setting is set to “MIN.”
43US
Se t t in g s fo r Sp e a ke rs (DVP-NW50 o n ly)
To obtain the best possible surround sound, set the size of
the speakers you have connected and their distance from
your listening position. Then use the test tone to adjust
the volume of the speakers to the same level.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “SP. SIZE”
appears.
Se le ct in g a sp e a ke r size
3 Press the “SP. SIZE” SELECT.
The Speaker size setup Menu appears.
Set the speaker size to match the size of the speakers you
are using. This setting is concerned with bass
management and downmix function. The list below
describes the available settings for each of the speakers.
Su b Wo o fe r (S.WOOFER)
Speaker Size
Function
4 Select the corresponding SELECT to select the
speaker to be setup.
YES
Select this if you have connected a sub
woofer speaker.
The size of speaker is toggled as you press any
SELECT as shown above.
NONE
Select this if you have not connected a sub
woofer speaker.
5 Repeat step 4 until you have selected all of the
speakers.
Fro n t Sp e a ke rs (FRONT)
Notes
• If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE.” Normally,
select “LARGE.”
Speaker Size
Function
LARGE
Normally select this position. SMALL cannot
be selected if sub woofer is set to “NONE.”
• If the sound is distorted, or you feel a lack of surround
effects when using multi channel surround sound,
select “SMALL” to activate the bass redirection circuitry
and output the front channel bass frequencies from the
sub woofer.
SMALL
Select this when the speaker cannot
reproduce adequate bass frequencies.
Ce n t e r Sp e a ke rs (CENTER)
Speaker Size
Function
About speaker sizes
Internally, the LARGE and SMALL settings for each speaker
determine whether or not the internal sound processor will cut
the bass signal from that channel. When the bass is cut from a
channel the bass redirection circuitry sends the corresponding
bass frequencies to the sub woofer or other “LARGE” speaker.
However, since bass sounds have a certain amount of
directionality it is best not to cut them, if possible. Therefore,
even when using small speakers, you can set them to “LARGE” if
you want to output the bass frequencies from that speaker. On
the other hand, if you are using a large speaker, but prefer not to
have bass frequencies output from that speaker, set it to
“SMALL.” If the overall sound level is lower than you prefer, set
all speakers to “LARGE.”
LARGE
Normally select this position. LARGE cannot
be selected if front speaker is set to
“SMALL.”
SMALL
NONE
Select this when the speaker cannot
reproduce adequate bass frequencies.
Select this if you have not connected a center
speaker.
Re a r Sp e a ke rs (SURROUND)
Speaker Size
Function
LARGE
Normally select this position. LARGE cannot
be selected if front speaker is set to
“SMALL.”
SMALL
NONE
Select this when the speaker cannot
reproduce adequate bass frequencies.
Select this if you have not connected a
surround speaker.
44US
Se t t in g t h e sp e a ke r d ist a n ce
Se t t in g a sp e a ke r le ve l
You must set the distance from your listening position to
the speakers.
The available distance for a center and a surround speaker
depends on that of the front speaker.
The next list shows the selectable distance value of each
speaker. The list below describes the available setting for
each of speakers. The default adjustments are in
parentheses.
The Level Menu contains parameters that let you adjust
the balance and speaker volumes of each speaker. The
settings available in this menu are applied to all sound
fields. Be sure to set “TEST TONE” to “ON” for easy
adjustment.
The default adjustments are in parentheses.
Speaker
Speaker level
SUB WOOFER (0 dB)
Set this between –6 dB and +6 dB in 0.5
dB increments.
Speaker
Distance
FRONT (10 ft/ 3.0m)
Set this between 3 and 20 ft (0.9 m and
6.0 m) in 1 ft (0.3 m) increments
FRONT (BALANCE)
CENTER (0 dB)
The balance can be adjusted 8 steps in
left and right position.
CENTER (10 ft/ 3.0m)
Set this between 3 and 20 ft* (0.9 m and
6.0 m) in 1 ft (0.3 m) increments.
Set this between –6 dB and +6 dB in 0.5
dB increments.
SURROUND
(10 ft/ 3.0m)
Set this between 3 and 20 ft* (0.9 m and
6.0 m) in 1 ft (0.3 m) increments.
SURROUND L (0 dB)
SURROUND R (0 dB)
Set this between –6 dB and +6 dB in 0.5
dB increments.
* The setup value may be different depending on the setup value
of the front speaker.
Set this between –6 dB and +6 dB in 0.5
dB increments.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
2 Press the “V” SELECT repeatedly until “SP.
The Setup Menu appears.
DISTANCE” appears.
2 Press the “V” SELECT repeatedly until “LEVEL”
3 Press the “SP. DISTANCE” SELECT.
appears on the front panel display.
The Speaker distance setup Menu appears.
3 Press the “LEVEL” SELECT.
The Level setup Menu appears.
4 Select the distance betw een the Unit and the
speaker by pressing the “+” and “–” SELECT.
The distance gets longer or shorter by 1 foot each time
you press each of the “+” or “–” SELECT .
“No Exist” appears on the front panel display if you
set the size of the speaker to “NONE” in “Selecting a
speaker size.” (page 44)
4 Adjust the speaker level by pressing each of the
“+,” “–,” “L,” or “R” SELECT.
The SELECT on the left side decrease the level in 0.5
dB steps. For front speaker adjustment, the SELECT
on the left side moves the speaker balance toward the
left.
The SELECT on the right side increase the level in 0.5
dB steps. For front speaker adjustment, the SELECT
on the right side moves the speaker balance toward
the right.
Continue to the next page
l
45US
Se t t in g s fo r Sp e a ke rs (DVP-NW50 o n ly) (co n t in u e d )
Ad ju st in g t h e sp e a ke r vo lu m e – TEST
Se t t in g t h e d yn a m ic ra n g e co m p re sso r
TONE
You can compress the dynamic range of the sound track.
This may be useful when you want to watch movies at
low volumes late at night.
The speakers will emit a test tone.
Use the remote while seated in your listening position to
adjust the volume of each speaker.
The default setting is underlined.
The default setting is underlined.
DRC
Function
Test Tone
Function
OFF
Reproduces the sound track with no
compression.
OFF
The test tone is not emitted from the
speakers.
STD
Reproduces the sound track with the
dynamic range intended by the recording
engineer.
ON
The test tone is emitted from each speaker in
sequence while you are adjusting the level.
However, when the speaker sizes set to
“NONE,” the speakers do not emit the test
tone.
MAX
Provides dramatic compression of the
dynamic range.
1 Press the “V” SELECT on the Home Menu, then
press “SETUP” SELECT.
1 Press the “V” SELECT on the Home Menu, then
press the “SETUP” SELECT.
The Setup Menu appears.
The Setup Menu appears.
2 Press the “DRC” SELECT to activate the Dynamic
2 Press the “TEST TONE” SELECT to activate the TEST
TONE.
range compressor.
“ON” and “OFF” are toggled as you press “TEST
TONE” SELECT.
3 Press the “DRC” SELECT again to select the sound.
“OFF,” “STD,” and “MAX” are toggled as you press
the button.
You will hear the test tone from each speaker for two
seconds each in sequence as follows.
Front speaker (L) t Center speaker t Front speaker
(R) t Surround speaker (R) t Surround speaker (L)
t Sub woofer
Note
Dynamic range compression works with Dolby Digital sources
only.
3 Adjust the volume level so that the volume of the
test tone from each speaker sounds the same w hen
you are in your main listening position.
To adjust
Use
balance of the front
right/ front left
speakers
front balance parameter on the
Speaker level Menu (page 45)
volume level of the
center/ surround/
sub woofer
surround balance parameter on the
Speaker level Menu (page 45)
4 Press the “TEST TONE” SELECT again to turn off the
TEST TONE.
46US
Op e ra t in g a So n y TV w it h
t h e Re m o t e
Co n t ro llin g yo u r TV w it h t h e re m o t e
You can operate a Sony TV using the remote without
presetting remote codes.
RM SETUP TV/VIDEO TV
TV/VIDEO
TV ?/1
1
5
2
6
0
3
7
4
8
ENTER
BACK
CLEAR
SELECT
MODE
HOME
DOWN
UP
DVD
F
MUTING
TOP MENU
MENU
MASTER VOL
ENTER
f
G
g
O
RETURN
TV VOL
DISPLAY
AUDIO
TV CH
ANGLE
TV VOL +/–
SUBTITLE
DVD SETUP
TV CH +/–
Press TV ?/1.
Operate your TV using the buttons below.
Buttons
Function
TV ?/ 1
Turn the TV on or off
TV/ VIDEO
Switch the TV input source between TV and
other input sources
TV VOL +/ –
Adjust the TV volume
Select the TV channel
TV CH +/ –
Note
Depending on the Unit connected, you may not be able to control
your TV using some of the buttons above.
47US
Pre ca u t io n s
Chapter 9
On safety
Other
• CAUTION – The use of optional instruments with this product
will increase eye hazard.
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the apparatus.
• Should any solid object or liquid fall into the cabinet,
unplug the Unit and have it checked by qualified
personnel before operating it any further.
• Unauthorized substitutions may result in fire, electric
shock, causing death or serious injury.
Attachment to a wall should not be performed by
ungualifield persons.
Information
This chapter provides you with
additional information that will help
you understand and maintain your
system.
Attachment and adjustment by ungualifield persons is
dangerous and may cause an accident or cause the unit
to fall.
Be sure to consign installation attachment and removal
to a gualifield service technician.
On power sources
• The Unit is not disconnected from the AC power source
as long as it is connected to the wall outlet, even if the
Unit itself has been turned off.
• If you are not going to use the Unit for a long time, be
sure to disconnect the Unit from the wall outlet. To
disconnect the AC power cord, grasp the plug itself;
never pull the cord.
On placement
• Place the Unit in a location with adequate ventilation to
prevent heat build-up in the Unit.
• Do not place the Unit on a soft surface such as a rug.
• Do not place the Unit in a location near heat sources, or
in a place subject to direct sunlight, excessive dust, or
mechanical shock.
• Do not install the Unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the Unit and the discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the Unit.
On cleaning
Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do not
use any type of abrasive pad, scouring powder or solvent
such as alcohol or benzine.
On cleaning discs
Do not use a commercially available cleaning disc. It may
cause a malfunction.
48US
Tro u b le sh o o t in g
IMPORTANT NOTICE
If you experience any of the following difficulties while
using the Unit, use this troubleshooting guide to help you
to remedy the problem. Should any problem persist,
consult your nearest installer.
Caution: This Unit is capable of holding a still video
image or on-screen display image on your television
screen indefinitely. If you leave the still video image or on-
screen display image displayed on your TV for an
extended period of time, you risk permanent damage to
your television screen. Plasma display panel televisions
and projection televisions are susceptible to this.
Po w e r
Th e p o w e r is n o t t u rn e d o n .
, Check that the AC power cord is connected
securely.
If you have any questions or problems concerning your
Unit, please consult your nearest Sony dealer.
Pict u re
Th e re is n o p ict u re .
, The video connecting cords are not connected
securely.
, The video connecting cords are damaged.
, The Unit is not connected to the correct TV input
jack (page 10).
, The video input on the TV is not set so that you
can view pictures from the Unit.
, Check the connection to your TV (page 10) and
switch the input selector on your TV so that the
signal from the Unit appears on the TV screen.
Pict u re n o ise a p p e a rs.
, The disc is dirty or flawed.
, If the picture output from your Unit goes through
your VCR to get to your TV, the copy-protection
signal applied to some DVD programs could affect
picture quality. If you still experience problems
even when you connect your Unit directly to your
TV, try connecting your Unit to your TV's S VIDEO
input (page 10).
Eve n t h o u g h yo u se t t h e a sp e ct ra t io in “ TV
Typ e ” o f “ Ge n e ra l Se t u p ,” t h e p ict u re d o e s n o t
fill t h e scre e n .
, The aspect ratio on the disc is fixed.
Th e p ict u re is n o t d isp la ye d co rre ct ly.
Th e Un it a n d t h e TV a re n o t syn ch ro n ize d .
, Check the “TV Type” setting in “General Setup”
(page 28).
(TV in North America uses the NTSC color
system).
Continue to the next page
l
49US
Tro u b le sh o o t in g (co n t in u e d )
Th e su rro u n d e ffe ct is d ifficu lt t o h e a r w h e n yo u
a re p la yin g a m u lt i ch a n n e l so u rce su ch a s Do lb y
Dig it a l so u n d t ra ck.
So u n d
Th e re is n o so u n d .
, Check the speaker connections and settings
(Installer’s manual).
, Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital format.
, The speaker cord is not connected securely.
, Check the speaker settings (Installer’s manual).
, The connecting cord is damaged. Replace it with a
new one.
, Press MUTING on the remote if “MUTING” is
displayed on the front panel display.
, Fast forward or fast reverse is performed. Press N
to return to normal play mode.
, The Unit input is not correctly set.
, The Intercom function or the Monitor function is
active. Cancel the Intercom function or the Monitor
function (page 38, 39).
Th e so u n d co m e s fro m t h e ce n t e r sp e a ke r o n ly.
, Depending on the disc, the sound may come from
the center speaker only.
No so u n d is h e a rd fro m t h e ce n t e r sp e a ke r.
, Check the speaker connections and settings.
Th e le ft a n d rig h t so u n d s a re u n b a la n ce d o r
re ve rse d .
No so u n d o r o n ly a ve ry lo w -le ve l so u n d is h e a rd
fro m t h e su rro u n d sp e a ke rs.
, Check that the speakers and components are
connected correctly and securely.
, Adjust the balance parameter on the Setup Menu
(page 43).
, Check the speaker connections and settings.
, Make sure the rear speakers are set to either
“SMALL” or “LARGE” (page 44).
, Make sure the surround mode function is on
(page 42).
Th e re is n o so u n d fro m t h e su b w o o fe r.
, Check the speaker connections and settings
(Installer’s manual).
, Depending on the source, the effect of the
surround speakers may be less noticeable.
, The sound volume is low on some DVDs. The
sound volume may improve if you set “DRC” on
the Setup Menu to “OFF” (page 46).
, Make sure that sub woofer is set to “YES” in the
speaker setting (page 44).
, Set the surround mode to “A.F.D” (AUTO
FORMAT DIRECT) (page 42).
Ne t w o rk
Se ve re h u m o r n o ise is h e a rd .
, Check that the speakers and components are
connected securely.
Th e Un it ca n n o t d e t e ct a n y o t h e r Un it s n o r
co m p u t e rs.
, Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 feet)
away from your TV set or a fluorescent light.
, Move your TV away from the audio components.
, The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
, Clean the disc.
, Network cable is disconnected. Check the network
cable connections.
, An IP address or a Sub-net mask is not set
properly. Check the LAN settings on the IP address
setup Menu (page 11).
, A router is turned off. Check the router power
condition.
Th e so u n d lo se s st e re o e ffe ct w h e n yo u p la y a
VIDEO CD, a CD, o r a n MP3.
Ca n n o t t a lk w it h o t h e r ro o m d u rin g In t e rco m .
, Intercom Privacy is set to on. Set it to off.
, Connection has not been established. Press the
“ANSWER” SELECT (page 38).
, Make sure the Unit is connected appropriately.
, The volume level is low. Press +VOLUME to adjust
the volume.
, Other Units have been using Intercom. Wait for a
while until Intercom is available.
50US
Ca n n o t m o n it o r o t h e r ro o m s.
Th e d isc d o e s n o t p la y.
, Monitor Privacy is set to on. Set it to off.
, The volume level is low. Press +VOLUME to adjust
the volume.
, Other Units have been using Intercom. Wait for a
while until Monitor is available.
, There is no disc inserted.
, The disc is upside down.
Insert the disc with the playback side facing the
Unit.
, The disc is skewed.
, The Unit cannot play certain discs (page 8).
, The region code on the DVD does not match the
Unit.
Ca n n o t g e t t ra ck t it le w h ile list e n in g t o m u sic
fro m NETWORK o r MY MUSIC.
, The PC application is not running. Start the PC
application on your computer.
, Moisture has condensed inside the Unit.
Remove the disc and leave the Unit turned on for
about half an hour.
Au d io re ce p t io n is in t e rru p t e d o r d ist o rt e d .
, The network does not have enough bandwidth.
Check to see if the network cable supports
100BASE-TX or not.
Th e MP3 a u d io t ra ck ca n n o t b e p la ye d .
, The DATA CD is not recorded in an MP3 format
that conforms to ISO 9660 Level 1/ Level 2 or
Joliet.
, The network cable, network switch, or router
device may not support 100BASE-TX. Check to see
if the router device supports 100BASE-TX or not.
, The MP3 audio track does not have the extension
“.MP3.”
, The data is not formatted in MP3 even though it
has the extension “.MP3.”
, The Unit can only play MP3 (MPEG1 Audio
Layer3) audio.
Op e ra t io n
, The Unit cannot play audio tracks in MP3PRO
format.
Th e re m o t e d o e s n o t fu n ct io n .
, The batteries in the remote are weak.
, There are obstacles between the remote and the
Unit.
Th e d isc d o e s n o t st a rt p la yin g fro m t h e
b e g in n in g .
, The distance between the remote and the Unit is
too far.
, The remote is not pointed at the remote sensor on
the Unit.
, The remote code switch setting on the remote does
not match the setting on the Unit.
, Shuffle Play, or Repeat Play has been selected
(page 21, 23, 24).
Cancel Shuffle Play, or Repeat Play (page 21, 23,
24).
, Resume Play has been selected.
During stop, press x on the remote and then start
playback (page 22, 23).
Ra d io st a t io n s ca n n o t b e t u n e d in .
, Check that the antennas are connected securely.
Adjust the antennas or connect an external antenna
if necessary.
, The title, DVD or PBC menu automatically
appears on the TV screen.
Pla yb a ck st o p s a u t o m a t ica lly.
, The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
, No stations have been preset or the preset stations
have been cleared (when tuning by scanning preset
stations). Preset the stations (page 31).
, Some discs may contain an auto pause signal.
While playing such a disc, the Unit stops playback
at the auto pause signal.
Th e Un it t u rn s o ff d u rin g DVD p la yb a ck.
, The Sleep Timer turned off the Unit at the preset
time (page 41).
Th e re m o t e d o e s n o t fu n ct io n .
, There are obstacles between the remote and the
Unit.
So m e fu n ct io n s su ch a s St o p , Se a rch , Re p e a t
Pla y, o r Sh u ffle Pla y ca n n o t b e p e rfo rm e d .
, Depending on the disc, you may not be able to
perform some of the operations above. See the
operating manual that came with the disc.
, The distance between the remote and the Unit is
too far.
, The remote is not pointed at the remote sensor on
the Unit.
, The batteries in the remote are weak.
Continue to the next page
l
51US
Tro u b le sh o o t in g (co n t in u e d )
Th e la n g u a g e fo r t h e so u n d t ra ck ca n n o t b e
ch a n g e d .
, Multilingual tracks are not recorded on the DVD
being played.
, The DVD prohibits changing the language for the
sound track.
Th e su b t it le la n g u a g e ca n n o t b e ch a n g e d .
, Multilingual subtitles are not recorded on the DVD
being played.
, The DVD prohibits changing subtitles.
Th e su b t it le ca n n o t b e t u rn e d o ff.
, The DVD prohibits turning off subtitles.
Th e a n g le s ca n n o t b e ch a n g e d .
, Multi-angles are not recorded on the DVD being
played (page 29).
, The DVD prohibits changing angles.
A d isc ca n n o t b e e je ct e d a n d “ LOCKED” a p p e a rs
o n t h e fro n t p a n e l d isp la y.
, Contact your Sony dealer or local authorized Sony
service facility.
“ PROTECT” a p p e a rs o n t h e fro n t p a n e l d isp la y.
, The speaker protection circuit is functioning.
, Check the speaker connections.
Th e Un it d o e s n o t w o rk n o rm a lly.
, If the Unit’s operation becomes effected, press
X/ 1 (POWER) on the Unit to turn off the power,
then turn on the power again.
52US
Erro r Me ssa g e s
If any of the messages below appear on the front panel display of the Unit, check the following table to solve the problem. If
any problem persists, consult your nearest Sony dealer.
Category
Message
Cause
Corrective action
PROTECTOR
Circuit protector is working
Irregular current is output from speakers. Turn off
the power and check the speaker connections, then
turn on the power again.
CD/ DVD
NO DISC
A disc is not inserted or
Insert a disc that is correspondent to the Unit.
correspondent to the Unit.
NETWORK/
MY MUSIC
IN USE BY xxx
xxx is using the disc in the specific
Unit.
Turn off the Main Unit and check the
speaker hookup.
xxx is the name of the Unit.
Access inhibit
Access inhibit
Access inhibit
Invalid
Party Privacy is set to ON on the
specific Unit.
Quit Party Privacy.
INTERCOM
MONITOR
Other
Intercom Privacy is set to ON on
the specific Unit.
Quit Intercom Privacy.
Monitor Privacy is set to ON on
the specific Unit.
Quit Monitor Privacy.
Cannot use a specific key on the
remote or enter the Party mode.
This operation is not currently enabled.
53US
Sp e cifica t io n s
Video section (DVP-NW50 only)
CDP-NW10/DVP-NW50
Laser
Semiconductor laser
Composite video out: 1Vp-p 75ohms
(CD: λ = 780nm)
S1 video out:
Y: 1Vp-p 75ohms
(DVD: λ = 650nm)
C: 0.286 Vp-p 75ohms
Emission duration:
continuous
General
DC power consumption:
Signal format system NTSC
CDP-NW10: DC 29.5 V/ 1A
DC 14V/ 1.5A
Audio section
DVP-NW50: DC 29.5 V/ 1A
DC 29.5 V/ 1A
Frequency response
Signal-to-noise ratio
20 Hz to 20 kHz (± 1 dB)
95 dB
DC 14V/ 1.5A
Rated output power 1kHz into 8ohms THD: 3%
CDP-NW10: 30 W + 30 W
DVP-NW50: 50 W + 50 W
Input sensivity (LINE IN)
500 mVrms
Power consumption: 540 W
Operating temperature: 0˚C to 40˚C (– 32˚F to 104˚F)
Dimensions:
230 ✕ 266 ✕ 104 mm
(9 1/ 8 ✕ 10 1/ 2 ✕ 4 1/ 8 inches)
(w/ h/ d)
Harmonic distortion
Wow and flutter
Less than 0.1 %
Mass:
CDP-NW10: 2.5 kg (5 lbs 8 oz)
DVP-NW50: 2.7 kg (5 lbs 15 oz)
Less than detected value
(± 0.001 % W PEAK)
Supplied accessories : For details on this see “Installer’s manual”
Tuner section
Design and specifications are subject to change without notice.
Frequency range
87.5 Hz to 108 kHz (100kHz step)
530 kHz to 1710 kHz (10kHz step)
54 dB
Signal-to-noise ratio
76 dB (MONO)
70 dB (STEREO)
0.5 %
THD at 400Hz
THD at 1kHz
0.3 % (MONO)
0.5 % (STEREO)
Antenna (aerial)
FM wire antenna (aerial)
Antenna (aerial) terminals
75 ohms, unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Antenna (aerial)
AM loop antenna (aerial)
Intermediate frequency
450 kHz
54US
La n g u a g e Co d e List
Code
6565
6566
6570
6577
6582
6583
6588
6590
6665
6669
6671
6672
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
Language
Afar
Code
7285
7289
7365
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7982
8065
8076
8083
Language
Hungarian
Armenian
Interlingua
Indonesian
Icelandic
Italian
Code
8084
8185
8277
8279
8285
8365
8368
8372
8373
8375
8376
8377
8378
8379
8381
8382
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8479
8482
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
Lamguage
Portuguese
Quechua
Rhaeta-Romance
Romanian
Russian
Kinyarwanda
Sanskrit
Serbo-Croatian
Singhalese
Slovak
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bislama
Bengali
Tibetan
Breton
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Slovenian
Samoan
Shona
Greenlandic
Cambodian
Kannada
Korean
Somali
Albanian
Serbian
Catalan
Corsican
Czech
Kashmiri
Kurdish
Sundanese
Swedish
Swahili
Welsh
Kirghiz
Danish
Latin
Tamil
German
Bhutani
Greek
Lingala
Tegulu
Laothian
Lithuanian
Latvian/ Lettish
Malagasy
Maon
Tajik
Thai
English
Esperanto
Spanish
Estonian
Basque
Tigrinya
Turkmen
Tagalog
Tonga
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Turkish
Tatar
Persian
Finnish
Fiji
Twi
Ukrainian
Urdu
Faeroese
French
Malay
Maltese
Uzbek
Frisian
Burmese
Nauru
Vietnamese
Volapuk
Wolof
Irish
Scots/ Gaelic
Galician
Guarani
Gujarati
Hausa
Nepali
Dutch
Xhosa
Norwegian
Oriya
Yoruba
Chinese
Zulu
Punjabi
Hindi
Polish
Croatian
Pashto/ Pushto
55US
In d e x
Nu m e rics
16:9 Wide
F
P
29
Fast forward 25
Parental
29
2CH STEREO
42
Fast reverse 25
Parental Control
Party Join 37
Party mode 37
PARTY PRIVACY 37
27
A
H
A.F.D
ALARM
ANGLE
42
HOME
17
40
Password
29
I
17, 26
PBC Playback
24
INTERCOM 38
Angle Mark 29
Play Mode 21, 23, 36
Preset station 33
INTERCOM PRIVACY
IP ADDRESS 11
38
AUDIO
Audio
17, 26
29
IR ROUTE
11
R
B
BACK
Radio
31
L
15, 17
Remote
11, 16, 18, 47
Language code list 55
BALANCE 43, 45
Remote code 13
LEVEL
45
34
Batteries
18
Repeat Play 21, 23, 24, 36
LINE IN
RESET
Resume Play 23
RETURN 17
30
C
M
Cable connect
Call sound
Captions
10
MASTER VOL
17
38
29
RM SETUP 17, 18
MENU
MODE
17
15, 17
CD
CHAPTER 26
CLEAR 17
5, 20, 22
S
MONITOR 39
Scan 21, 25
MONITOR PRIVACY
MP3 25
39
Screen Saver 29
Component 34
Search
21, 25
15, 17, 18
28
MUTING
15, 17
SELECT
D
MY MUSIC 36
Setup Display
DATA CD
5
Shuffle Play 21, 23, 36
N
NAME
Default
30
SIRCS
SLEEP
13
41
12
DIAGNOSIS 12
NETWORK 35
Normal/ LB 29
Normal/ PS 29
Numeral Buttons
DIMMER
Disc Menu
DISPLAY
43
Sleep timer 41
29
SPEAKER DISTANCE
45
17, 26
SPEAKER SIZE
44
17
15
DOLBY PL 42
DOLBY PLII 42
DOWN/ UP 17
SUBTITLE
Subtitle
17, 26
29
O
Surround mode
42
OPEN/ CLOSE
DRC
DVD
46
OSD Lang
29
5, 23
DVD SETUP 17
Dynamic range
46
E
ENTER
17
56US
T
TEST TONE 46
TIME OUT 13
TITLE
TOP MENU 17
TRACK 26
Troubleshooting
26
49
TUNER
TV
31
47
TV CH
TV Type
17, 47
28
TV/ VIDEO 17, 47
TV VOL
17, 47
17, 47
TV ?/1
U
Unit Name 12
V
VIDEO CD 5, 24
VOL PRESET
43
VOLUME
15, 17, 38, 39
Sym b o ls
?/1 15, 17
m/M
17
./ >
15, 17
X(PAUSE) 15, 17
N(PLAY) 15, 17
m/M(SCROLL DOWN/ UP) 15
G/ F/f /g 17
x (STOP)
15, 17
57US
© 2005 Sony Corporation Printed in Korea
|
