s
Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.my-siemens.com
Call an entry ........................... 21
View an entry ......................... 21
Groups ................................... 22
WAP connection .....................46
WAP browser settings .............47
Connection security ................48
In-
e end
ser
See also Index at the end of this User Guide
2
Phone .................................... 73
Screensaver ........................... 74
Call ........................................ 75
Customer Care ..........................96
Product data .............................99
SAR – European Union
In-
e end
ser
SAR – International
Index .......................................107
See also Index at the end of this User Guide
3
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
ons
Remember to comply with legal
requirements and local restric-
tions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while
driving.
Do not use an optical magnifier
to look at the activated infrared
interface [Class 1 LED product
(classification as per
IEC 60825-1)].
Only use original Siemens bat-
teries (100 % mercury-free) and
– charging devices. Otherwise
you risk serious damage to
health and property. The battery
could explode, for instance.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
You may only open the phone to
replace the battery (100 % mer-
cury-free), or SIM card or
MultiMediaCard. You must not
open the battery under any
circumstances. All other chang-
es to this device are strictly pro-
hibited and will invalidate the
guarantee.
The SIM card and
MultiMediaCard may be re-
moved. Caution! Smallparts like
this could be swallowed by
young children.
Important:
The mains voltage specified on
the power supply unit (Volt)
must not be exceeded. Other-
be destroyed.
Please dispose of unwanted
batteries and phones as permit-
ted by the laws in your country.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
The ringtone (S. 88), info tones
(S. 88) and handsfree talking
are reproduced through the
loudspeaker. Do not hold the
phone to your ear when it rings
or when you have switched on
the handsfree function (p. 15).
Otherwise you risk serious
permanent damage to your
hearing.
Use only Siemens original ac-
cessories. This will avoid poten-
tial risks to health or property
and ensure compliance with all
relevant regulations.
Improper use will invalidate the guarantee!
For software installation see important
warning message on p. 68.
4
Overview of the phone
w of c Integrated antenna
e
Do not interfere with the phone above the
battery cover unnecessarily. This reduces
the signal strength.
d Loudspeaker
e Displays
Signal strength/GPRS available/
battery level
f Number keys
Digits, letters.
g Joystick/Other keys
See next page.
h Microphone
c Infrared interface
(IrDA, e.g. for communication between PC/
PDA and mobile phone)
d Push-to-talk key
• In standby mode: start voice control,
• In voice control mode: start recording,
• In voice record mode: start recording.
e Snapshot key
• In standby mode:
start snapshot application,
• Snapshot mode: take a photo.
f MultiMediaCard insertion
g Device interface
Connection for charger, headset etc.
5
Overview of the phone
c #key Hold down
In standby mode: switch key lock on/off.
d Soft keys
The current functions of these keys are dis-
played in the lowest display line as text or
icons.
e
key Hold down
*
In standby mode: Switch on/off the profile
"Mute" (p. 71).
f Joystick
Move the joystick left, right, up down for
navigation on the display.
Press the joystick to open folders or start
applications.
g Menu key
Press to display the main menu. Hold down
to switch between applications (p. 9).
h Call key
Dial displayed phone number or name,
accept calls.
In standby mode: display the last calls.
In call mode: Hold/unhold function
i On/Off/End key
Press: end call/function/application and
return to Idle mode.
j Shift key
Opens the text menu with editing functions.
In lists: while holding, press/move the joy-
stick to mark/unmark items.
In edit mode: while holding, press/move the
joystick to mark/unmark characters.
k Clear key
Deletes selected items in edit mode or user-
created lists.
In menus: one menu level back.
Hold down:
Switch phone on/off. From menus: return to
standby mode.
6
Getting Started
• Insert SIM card in the opening
Insert SIM card/battery
with contacts pointing downwards.
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored.
If the SIM card has been delivered
in credit card size, snap the smaller
segment out and remove any rough
edges.
First push at the phones edge
,
q
than push gently until it engages
r (make sure the angled corner is
in the correct position).
r
• Press the lock n and remove the
lid in the direction indicated by
the arrow
.
o
q
n
• Insert battery into phone s.
s
o
• Remove the battery upwards p.
p
• Close the lid in reverse way as de-
scribed in
.
o
Note
Always switch off phone before removing
the battery!
Only 3-Volt SIM cards are supported.
Please contact your service provider if you
have an older card.
7
Getting Started
Charging time
An empty battery is fully charged
Emergency number
(SOS)
after about 1 - 1.5 hours. Charging is
only possible in an ambient tempera-
ture of 5 °C to 40 °C (the charge icon
flashes as a warning when the tem-
perature is 5 °C above/below this
range). The mains voltage specified
on the power supply unit must not
be exceeded.
Must only be used in real emergen-
cies!
Switch the phone on and check for
adequate signal strength.
Press to go to standby if in
a menu or application.
E
Key in the emergency
Charge icon not visible
M
number (e.g. 112 or
If the battery is totally discharged
no charge icon is displayed when
the charger is plugged in. It will ap-
pear after two hours at most. In this
case the battery is fully charged after
1.5 - 2 hours.
other official emergency
numbers).
Press to call the number.
D
You can make an emergency call on
any network without a SIM card and
without entering a PIN (not available
in all countries).
Only use the charger provided!
Display while in service
Charge level display during opera-
tion (empty-full):
Charge battery
The battery is not fully charged
when delivered. Plug in the charger
cable at the bottom of the phone,
plug in the power supply unit to the
mains power socket and charge for
at least two hours.
a d g
A beep sounds when the battery is
nearly empty.
Note
The charger heats up when used for long
periods. This is normal and not dangerous.
Display when charging is in
progress
Operating times
Standby time up to 200 hours, and up to
240 minutes talk time, depended on the
operating conditions.
h
During charging.
8
Getting Started
User guide
The following symbols are used to
explain operation:
Navigation
Joystick
M
E
Enter numbers or letters.
On/Off/End key.
D
Call key.
AB
F
Soft keys.
Shift key.
Clear key.
Menu key.
Move the cursor in menus, and lists
by moving the joystick to the left,
right, up, and down.
G
C
Open selected folders or start
applications by a short press on
the joystick.
Usejoystickfornavigation
on display, and for open
folders and applications.
K
L
Function depends on the
service provider, special
registration may be
necessary.
9
Getting Started
Menu
Switching between
applications
In the Menu you can access all main
applications.
If there is more than one application
running you can switch between
them.
Press the menu key to
display the Menu.
C
Press and hold down the
C
Personalise your Menu
Organise all applications and folders
in any order you like. Select the re-
quired item, then:
Menu key.
A list with all active applications ap-
pears on the display. Scroll to the re-
quired one and press the joystick to
switch the active one.
OptionsKMove
Note
A check mark is placed beside the se-
lection. Move with the cursor to the
new position and press OK.
If too many applications are open, some
may be closed by the phone to save memo-
ry. Unsaved data will be saved automatical-
ly before an application is closed.
To move items to a folder, select the
required item:
OptionsKMove to folder
Searching
A list of available folders is shown as
possible destinations (function is not
shown if there is no folder available).
You can also choose the root level
when moving an item out of a fold-
er. Select the new location for the
item and press OK.
Your phone has one search field for
all purposes. Usually the search field
is indicated as such by a magnifying
glass to the left of the text-field.
In other cases you may have to
activate it:
OptionsKFind
Menu Options
To search for an item, key in letters
in the search field. The phone starts
searching automatically and shows
the matches for selection. To opti-
mise the search, key in more letters.
To open the found item, press the
joystick.
Open, List view, Move, Move to folder,
New folder, Exit.
10
n, off Switch on, off
Switch on, off / PIN entry
Standby mode
ry
To switch on, hold down
When the name of the service
provider appears at the top of the
display, the phone is in standby mode
and ready for use.
E
On/Off/End key.
To switch off, hold down
On/Off/End key in standby
mode.
Enter PIN
The SIM card can be protected with a
4-8 digit PIN.
Enter your PIN code using
M
the number keys (shown
as a series of asterisks.
If you make a mistake
press G.
Press OK to confirm the in-
put. Logging on to the
B
The following indicators are shown
on the display:
network will take a few
seconds.
Signal strength
_
^
Strong signal.
A weak signal reduces the call
quality and may lead to loss of
the connection. Change your
location.
Battery charge level
Shows the power of the battery in 7 steps,
e.g.:
d
g
Half full.
Full.
11
Security
General
The phone and SIM card are protect-
ed against misuse by several security
codes.
PIN code
You can change the PIN to any
4-8 digit number you may find easier
to remember.
Keep these confidential numbers in a
safe place where you can access them
again if required.
PIN2 code
(displayed only if PIN 2 is available)
Change PIN2 proceed as with PIN
code.
PIN
Protects your SIM card (person-
al identification number).
code
PIN2
code
This is needed to set the charge
detail display and to access ad-
ditional functions on special
SIM cards.
Security code
You can change the security code to
any number (exactly 5 digits). The
default code number is 12345.
PUK
PUK2
Key code. Used to unlock SIM
cards after the wrong PIN has
been entered.
times, the phone will be blocked. In
this case, please contact Siemens
Service (p. 96).
Security
code
Protects your phone. The de-
fault code number is 12345.
You can change the security
code to any number.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided by
your service provider with the SIM
card, according to instructions. If the
PUK (MASTER PIN) has been lost,
To access code administration:
CKSetupKSettingsKSecurity
KPhone and SIM
KSelect a function:
PIN code request
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Note
See p. 79 for more functions.
12
Making a phone call
Dialling with number
keys
Accept call
all
The phone must be switched on
(standby mode).
The phone must be switched on
(standby mode).
Press.
D
Enter the number (always
M
or
with prefix).
0 Press to set the inter-
A
Press Answer.
national prefix +.
If the phone number has been trans-
mitted by the network, it is dis-
played. If it is stored in the Contacts,
the corresponding name/picture is
displayed.
GA short press clears
the last digit, a long press
clears the entire number.
Press the Call key. The dis-
D
played phone number is
dialled.
End call
Dialling using Contacts
Press the End key.
E
Press the joystick or move it down to
Note
open Contacts (in standby mode)
End an active call even if the person on the
other end of the line has hung up first.
or
CKContacts
Dialling Options
Add to Contacts (Create new, Update
existing), Call, Send (SMS, MMS).
Select required entry.
Press the Call key to start
the call.
D
For further information see p. 21.
Note
You can also make calls from numbers
found within SMS, MMS, E-mail messages
and other texts, from the SIM Phonebook or
by using shortcuts (p. 75).
13
Making a phone call
Reject call
Conference
Press the end key. The
Call up to 5 parties one by one and
E
caller will hear a "line
busy" tone.
link them together in a phone con-
ference. Some of the functions de-
scribed may not be supported by
your service provider or may have to
be enabled specially.
The call may be diverted if
this has been set previ-
ously (p. 83).
Call waiting
You may need to register for this
service with your service provider
and set your phone accordingly
(p. 75).
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call.
You have the following options:
Press Call during the call
D
You have established a connection:
Enter the new number, or
to answer the waiting call.
The first call is put on
hold.
M
use Contacts (p. 21).
Press briefly to end the ac-
Press the Call key.
D
E
tive call or hold down to
end both calls. Also:
The first call is automati-
cally put on hold. When
the new connection is
established, add the first
participant:
OptionsKEnd all calls
If a second call is on hold:
Press Swap to switch be-
tween the calls.
B
14
Making a phone call
OptionsKConference
Options during a call
BT handsfree on, End active call, Hold/
Unhold, Mute/Unmute, New call, Add to
conference, Send DTMF, Answer, Reject,
Mute
To add another person to
the conference, repeat
procedure and then
select:
OptionsKAdd to conference
Most relevant functions:
Mute/Unmute
Private
Switch microphone on/off.
If switched off, the person on the
other end of the line cannot hear you
(muting)
You can have a private conversation
with one of the conference partici-
pants:
OptionsKConferenceKPrivate
Transfer
Select participant.
The original call is joined to the sec-
ond one. For you, both calls are now
ended
B
Press Private.
You can now have a private discus-
sion, while the rest of the confer-
ence participants continue talking.
Send DTMF
You can enter control codes (digits)
during a call so that an answering
machine can be controlled remotely.
These digits are directly transmitted
as DTMF tones (control codes).
To end the private conversation and
go back to the conference:
OptionsKConference
*
#
*
Press to produce a *.
Press to produce a #.
Drop
To remove one participant from the
conference:
Press twice to produce "p"
for a pause of approx.
2 seconds, and press
3 times to produce "w" if
you want the remaining
sequence not to be sent
until you press Send again
during the call.
OptionsKConference
KDrop participant
Select participant.
B
Press Drop.
Press OK to send the tone.
B
15
Making a phone call
Note
Handsfree
To activate/deactivate the loud-
speaker during a call:
To store DTMF tones as an Contacts
entry, see p. 21.
Press sidekey
Volume control
Move the joystick left/right to de-
crease/increase volume when a call
is active or a sound plays.
Do the same if a headset is
connected.
or
OptionsKBT handsfree on/
Activate handset
You can hear the caller via the built-
in loudspeaker. Also useful when us-
ing an application during a call, e.g.
calendar or notes.
16
Writing Text
Text
General
T9 writing
Your phone offers two ways of
writing text:
To switch to T9 writing:
F
T9 input on
Press.
• The conventional method. You
press a number key repeatedly
until the required character
appears.
Select.
If T9 text input is switched on this
icon is shown:
• The T9 method. You write a word,
pressing each number key only
once.
T9 deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary. Since the display changes
as you proceed ...
Conventional writing
To switch to conventional writing:
... it is best if you finish a word without
looking at the display.
You simply press the keys where the
relevant letter is located once only.
For "hotel", for example, type:
F
Press.
Alpha mode
Select.
Press a number key repeatedly until
the required character appears.
Make a pause until the cursor
appears to the right of the written
character. Write next character and
so on.
46835
While you write a word it is under-
lined. If it is correct move the cursor
to the right or insert a space.
If the word is incorrect and the cur-
sor marks the word:
After the characters of a key its
number is written, followed by
similar characters used in foreign
languages.
Press >>T9>> repeatedly to
B
view matching words
stored in the dictionary.
If the last match is
reached, you can add the
word as a new entry to
the dictionary.
17
Writing Text
Press Spell to write the
Writes a dot.
0
0
A
new word. Press OK to
Multiple short press
inserts punctuation
marks. *
save it to the dictionary.
General rules
Shows a table with special
characters (symbols) for
selection.
*
For writing text, several modes are
available. For changing mode, use
the #key. The status indicator is
shown at the top line of the display.
Navigate to the desired
character by using the
joystick.
Long press switches to:
#
Deletes the character left
of the cursor.
123 – Number mode. For
G
leaving number mode,
long press the key again –
you cannot change be-
tween the other modes
when 123 is activated.
* Long press on any number key
writes the number.
Short press switches
#
between:
abc/T9 abc – All lower case.
Abc/T9 Abc – First letter
upper case, following let-
ters lower case.
ABC/T9 ABC – All upper
case.
Entering 1opens a small
pop up menu. *
1
Short press once writes a
blank and ends the word.
Short press twice for line
feed.
1
Short press three times for
entering 1. *
18
Writing Text
Insert symbol
Shows a table with special
characters for selection.
Writing language
Text options
During writing text, T9 options, oth-
er mode options, and writing lan-
guage can be changed. Depending
on the current situation not all func-
tions are visible.
Change the T9 input lan-
guage. If the required dic-
tionary is not available,
see Writing language, p. 73.
Press.
F
Copy
Selected text will be
copied into the clipboard.
To select text:
T9 input Select.
Matches
View a list of matching
words for selection.
F Press and hold,
while moving the joystick
left/right to select words
or up/down to select lines.
Insert word
Add a word to the diction-
ary (max. 32 letters). If
the dictionary becomes
full, a new word replaces
the oldest one.
F Still hold and
press Copy.
Cut
Short press to open
F
the menu, select Cut to
cut and copy the selected
text into the clipboard.
Edit word
Edit word in abc/ABC
mode.
Paste
To insert text from the
clipboard:
Off
Ends T9 mode.
F Press and hold, then
Alpha mode
press Paste.
Switches to lower case
mode. The status indica-
tor shows abc.
Press to remove the selected
text from the document.
G
Number mode
Switch to number input
mode. The status indica-
tor shows 123.
19
Contacts
General
Insert SIM card
entries
In Contacts you can store and
manage entries with names, phone
numbers and additional address in-
formation. Add voice dialling, a per-
sonal ringtone or a thumbnail image
to an entry.
You can copy entries from the SIM
card to the Contacts on the phone.
Further data can be added to them
subsequently.
CKExtrasKSIM
Open SIM phonebook and select the
name(s) you want to copy by mark-
ing.
Open the Contacts
CKContacts
It is also possible to open contacts by
pressing joystick downwards, or to assign
one of the softkeys in idle mode a shortcut
to contacts.
OptionsKCopy to Contacts
To copy an entry from Contacts to SIM,
open the entry and select the required
number:
New entry
OptionsKCopy to SIM ph.book
CKContactsKOptions
Contacts Options main menu
KNew contact
Open, Call, Create message (SMS, MMS,
E-mail), New contact, Edit, Delete, Dupli-
cate, Add to group, Belongs to groups,
Mark/Unmark, (Mark, Mark all, Unmark
all), Send business card (via SMS, via e-
mail, via Bluetooth, via infrared), Con-
tacts info (Memory, Voice tags) Exit.
Enter at least a name and
M
a phone number. To write
text, see, p. 16.
Press Done to store the
new entry.
B
Contacts Options
By opening a contact the following
functions are available.
Call, Create message (SMS, MMS, E-
mail), Edit, Delete, Defaults, Add voice
tag, Ringtone, Copy to SIM ph.book,
Send business card (via SMS, via e-mail,
via Bluetooth, via infrared), Ringtone,
Send business card (via SMS, via e-mail,
via Bluetooth, via infrared), Exit.
20
Contacts
Edit an entry
Add and remove fields
Select required entry.
There are additional fields available
for an entry. To add/delete an extra
field open the entry, then:
OptionsKEdit
Make the required
changes.
M
OptionsKEdit
Then in edit mode:
Press Done, to save the
setting.
OptionsKAdd detail/Delete detail
select to edit, complete or delete
informations of a contact entry.
B
Delete an entry
Select required entry.
OptionsKDelete
or
or
OptionsKEdit label select to rename
a field.
Add a picture
There are two different types of pic-
ture you can add to an contacts en-
try. See also Camera, p. 49.
press
button.
G
Delete multiple entries
Select required entries.
OptionsKMark
Thumbnail
This image is shown in the display
when the entry calls you. To open
the required entry:
or
OptionsKMark all
The entries are indicated by a check
mark. Mark further entries if re-
quired. To delete all marked entries
select:
OptionsKEdit
Then in edit mode:
OptionsKAdd thumbnail
Select a thumbnail.
OptionsKDelete
Image
or
Attach an image to an entry. Open
the required entry, move the joystick
to the right to open the image view,
then:
press
button.
G
OptionsKAdd image
21
Contacts
Add DTMF tones
In editing mode add the field DTMF
to the entry:
View an entry
The view mode shows all fields with
information contained in the entry.
OptionsKAdd detailKDTMF
Select the required entry and press
the joystick
Key in the DTMF tone
M
or
string.
OptionsKOpen
Move the joystick to the right to
open the image view.
To use it, make a call. Once the con-
nection is established, select the
DTMF field and press OK.
View Mode Options
Editing Options
Call, Create message (SMS, MMS, E-
mail), Edit, Delete, Defaults, Add voice
tag/Voice tags, Assign shortcut:/Remove
shortcut, Ringtone, Copy to SIM ph.book,
Send business card (via SMS, via e-mail,
via Bluetooth, via infrared), Exit.
Add thumbnail/Remove thumbnail, Add
detail/Delete detail,Edit label, Exit.
Call an entry
CKContacts
Assign default numbers and
addresses
Select required entry and press
joystick.
If there is more than one number
available select the required number
from the list.
If an entry has several phone num-
bers or e-mail addresses, to speed up
calling and sending messages, you
can define certain numbers and ad-
dresses to be used as default.
Press.
D
Open the entry.
OptionsKDefaults
22
Contacts
In a pop-up window the following
options are displayed:
Add members
Open Contacts:
• Phone number
CKContacts
• SMS number
Select required entry.
• MMS number/address
• E-mail address
OptionsKAdd to group
Select required group (if more than
one available).
Select an option, then
Press Assign. All assigned
A
Add to group: press.
A
numbers/addresses are
displayed. Select the one
you want to have as the
default.
Add multiple members
Open Contacts
CKContacts
Groups
Move the joystick to the right to
open the Groups list. Select and
open required group.
For better handling of large numbers
of Contacts entries you can assign
them to groups. These can also be
used as distribution lists for sending
short messages or e-mails.
OptionsKAdd members
Select an entry and press the joystick
to mark it. Repeat on all entries you
want to add.
New group
Open Contacts:
Press OK to add all marked
A
entries to the group.
CKContacts
Move the joystick to the right to
open the Groups list.
OptionsKNew group
Write a name for the
group.
M
Press OK.
A
23
Contacts
Remove members
Open Contacts:
CKContacts
Voice Dialling
30 phone numbers can be di-
alled by simply saying a word e.g.
the name of an entry. Voice dialling
entries must be stored in the phone’s
memory (not on the SIM card!).
Move the joystick to the right to
open the Groups list. Select and
open required group. Then select
required entry;
Some useful hints before using voice
dialling:
OptionsKRemove from group
• Voice tags depend only on the
speaker’s voice, not a language.
Press Yes
A
• Beware of loud background noise,
voice tags are sensitive to it.
or
press
button.
G
• Use long names for better recog-
nition and differentiation be-
tween similar names.
Groups Options
Open, New group, Delete, Rename,
Ringtone, Contacts info (Memory, Voice
tags), Exit
• When using voice dialling, the
loudspeaker is in use.
Most relevant functions:
Record
Open Contacts and select the
required entry.
Ringtone
Assign an individual ringtone to the
selected group.
Open the entry and select the
required number.
Contacts infoKMemory
No. of contacts/groups
Contacts infoKVoice tags
OptionsKAdd voice tag
Press Start.
List of all entries with voice tags.
Press Options to edit.
A
Say the name after the starting tone.
There are two times training to enter
a voice tag. Wait until the name is re-
peated and automatically saved by
the phone.
24
Contacts
Press Quit if you don’t
Add a ringtone
B
want to save recording.
You can set a specific ringtone for
each entry or group. When that entry
or group member calls you, this ring-
tone will be played.
When the voice tag is
saved, a symbol can be
seen next to the number
in the addressbook entry.
Note
Apply
The phone number of the caller must be
sent with the call to become recognised
(see also Send my caller ID, p. 75).
Long press Voice Dialling key on the
side of the phone.
Open Contacts and select the
required entry. Open the entry
or
move the joystick to the right to
open the Groups list.
A short signal sounds. Now say the
name. The phone answers with the
original voice tag and displays the
number and name. The number will
be dialled after 1.5 seconds.
then
OptionsKRingtone
Select required tone.
B
Press Select.
Press End call if you don’t
A
want to make this call.
Note
All entries in a group get the same ringtone
you assign to the group, even if they had
their own one before.
Editing Options
Playback, Delete, Change
Note
To view the list of all defined voice tags:
Open Contacts:
OptionsKContacts infoKVoice tags
To hear a voice tag, select it:
OptionsKPlayback
25
Contacts
Business Card
You can create an entry as your own
business card and transmit it as a
message in vCard format via SMS
and e-mail or you may transmit it
to another device with IrDA or
Bluetooth capability.
Open Contacts and select your entry.
OptionsKSend business card
Then select the method:
via SMS, p. 29
via Bluetooth, p. 84
via infrared, p. 87
26
Records
General
Records list
Your phone stores numbers
CKRecords
of phone calls for convenient
redialling and registers all traffic
such as short messages, packet data
connections and fax/data calls.
Move to right to show the total
records list.
Icons in the list:
Missed calls.
Recent calls
Received calls.
Dialled numbers.
CKRecordsKRecent calls
Select required list:
Records list options
View details, Clear records, Filter, Add to
Contacts (Create new, Update existing),
Settings, Exit.
Calls missed
Up to 20 phone numbers of calls that
you have received but not answered
are stored for call back purposes.
L
Most relevant function:
Requirement: The network supports
the "Caller Identity" feature
Use the Filter for a customized view
of the list.
Calls received
Up to 20 phone numbers, or names
of the most recently accepted calls
are listed.
L
Call duration
Displays the duration of incoming
and outgoing calls.
Requirement: The network supports
Available lists:
the "Caller Identity" feature
Last call, Dialled numbers, Calls re-
ceived, All calls
Dialled numbers
Access to the last 20 numbers you
dialled or attempted to call.
Note
You can see the call duration during an
active call:
Editing Options
After selecting the call list, the fol-
lowing options are available:
OptionsKSettings
KShow call durationKYes
Call, Use number, Delete, Clear list, Add
to Contacts (Create new, Update exist-
ing), Exit
27
Records
Call costs
GPRS data counter
Call costs allows you to check the
cost of the last call or all calls.
CKRecordsKGPRS counter
Allows you to check the amount of
data sent and received during packet
data (GPRS) connections.
Call costs limit set by a service
provider
Special SIM cards allow the service
provider to define a credit or a period
after which the phone is barred for
outgoing calls.
Records options
The offered functions depend on the
current situation/position:
Open, Clear timers, Clear counters,
Clear recent calls, Settings, Exit
Most relevant functions:
Clear recent calls:
You can clear all recent calls lists.
Settings:
The number of remaining units is
shown during a call and in standby
mode. The display of prepaid cards
may vary depending on the service
provider.
Call costs limit set by yourself
(PIN 2 query)
• Records duration: No, 1,10 or 30
days.
CKRecordsK
• Show call duration during an active
call: Yes/No
KLast call units/All calls' cost
Mark one of them. For activating
select:
• Show costs in (PIN 2 query):
Currency/Units
OptionsKSettings
• Call cost limit (PIN 2 query): Off, On
(see above).
KCall cost limitKOnKOK
Enter the limit in units or currency
depending on the setting Show costs
in above.
28
Messages
s
Depending on the service provider,
General
CKMessages
Transmit and receive messages via:
• SMS,
e-mails and faxes can also be sent or
e-mails can be received via SMS
(change setting if necessary, p. 37).
Create a short message
• Smart message,
• MMS,
MessagesKCreate message
KSMS
To insert recipient in the field To:
• E-mail,
• Press joystick to open contacts,
mark/unmark recipient(s).
Press OK to return to message.
If a recipient offers multiple
phone numbers, select one.
• Bluetooth or infrared.
Additionally you may receive cell
broadcast messages or WAP service
messages.
• Write the phone number
Message options
application (Copy, see p. 18).
The offered functions depend on the
current situation/position.
Move down to the text field and
write text (p. 16).
Open, Create message (SMS, MMS, E-
mail), Connect, SIM messages, Cell
broadcast, Service commands, Settings,
Exit
In the top of the display the message
length indicator will show you the
number of used characters and SMS.
New messages
SMS (Short message)
You may transmit and receive very
long SMS (up to 760 characters) on
your phone, which are automatically
composed from several "normal"
SMS messages (note the accruing
charges).
29
Messages
Send the message:
Ask your service provider whether
this service is available. You may
need to register for this service
separately.
OptionsKSend
Save the message (to send it later):
Press Close to save mes-
sage to Drafts.
B
Note
Only devices that offer Multimedia Messag-
ing Service can receive multimedia
messages.
SMS Options
Send, Add recipient, Insert (Picture,
Template), Delete, Message details,
Sending options (p. 28), Exit.
A multimedia message can have
pictures included in each page.
Smart message
Text can be composed using T9
support (p. 16).
You can send a business card (vCard,
p. 25) or a calendar note (vCalendar,
p. 59). You may receive e.g. WAP
Service setting informations, a ring-
ing tone or an operator logo.
An Image that has been produced
with Snapshot or received in a mes-
sage can be attached. The maximum
size of 640x480 pixels is reduced to
the size of the display.
A Sound clip is sent and received as a
AMR file.
MMS
The Multimedia Messaging Service
enables you to send texts, pictures,
sounds and video clips in a com-
bined message to another mobile
phone or to an e-mail address.
Depending on the setting of your
phone, you will automatically
receive the complete message or
you will receive a notification for a
few seconds that shows that a new
message is on the server. User has to
change the settings to Retrieve im-
mediately to receive the message.
A Video clip can be recorded with the
Camcorder application, located at:
CKCameraKVideo
Further informations about cam-
corder see: www.my-siemens.com/sx1
All items in an MMS are combined in
the form of a slide show.
30
Messages
Create a multimedia message
To see/hear the single objects of the
message:
MessagesKNew messageKMMS
To insert recipient in the field To:
OptionsKObjects
(In the Objects view you are offered
other Options to arrange, open and
remove objects).
• Press joystick to open contacts,
mark/unmark recipient(s). Press
OK to return to message.
If a recipient offers multiple phone
numbers or e-mail addresses,
select one.
Save the message (to send it later):
Press Close to save mes-
B
sage to Drafts.
Send the multimedia message:
OptionsKSend
• Write the phone number
application (Copy, see p. 18).
or
Move down to the text field and
write text (p. 16).
press call creation key to send the
message
To add an image, a sound clip, a
video clip and templates to the
message:
MMS Options
Send, Add recipient, Insert, Preview
message, Objects, Remove, Delete,
Message details, Sending options, Exit.
OptionsKInsert (Image, Sound clip,
Video clip, New image, New
sound clip, Template)
To remove the image, the sound clip
or video clip from the message:
OptionsKRemove
(Image, Sound clip, Video
clip)
To see the complete multimedia
message before sending:
OptionsKPreview message
31
Messages
OptionsKInsert (Image, Sound clip,
E-mail
Video clip, Note, Template)
Your phone has its own e-mail client.
You can use it to create and receive
e-mails. A file from the file system
(e.g. ringtone) can be inserted in an
e-mail as an attachment.
To see/hear the single objects of the
e-mail:
OptionsKAttachments
(In the Attachments view you are
offered other Options to open, insert
and remove objects)
Create an e-mail
MessagesKNew messageKE-mail
To insert recipient in the field To:
Send the e-mail:
OptionsKSend
(E-mails are automatically transmit-
ted to the Outbox before sending).
• Press joystick to open contacts,
mark/unmark recipient(s). Press
OK to return to message.
If a recipient offers multiple e-mail
addresses, select one,
Save the message (to send it later):
Press Close to save mes-
B
• Write the e-mail address(es).
sage to Drafts.
Note
E-mail Options
Send, Add recipient, Insert, Attachments,
Delete, Message details, Sending
options, Exit.
Press for @.
*
#
Press to separate several
recipients with a semicolon.
• To send a copy of the e-mail to
someone, insert the address in
the field Cc:
header of the e-mail.
Move down to the text field and
write text (p. 16).
To add attachments like images,
sound clips, video clips, notes and
templates to the message:
32
Messages
Inbox
Viewing a message
the Inbox (except e-mails, see Mail-
box (p. 35) and cell broadcasts
(p. 41).
Select the required message in the
Inbox and press the joystick to open
it. Use the joystick to scroll through
the message line by line. Move the
joystick left/right to show the previ-
ous/next message.
MessagesKInbox
Unread messages are written in
bold. The following icons may
appear for
View options
The functions offered depend on the
opened message type.
new/read short messages
new/read smart messages
new/read multimedia
messages
SMS and others
Reply
Open the message in the editor with
the sender’s address in the field To:
new/read WAP service
messages
data received via
Bluetooth
Forward
Open the message in the editor.
data received via infrared
unknown type
Call
Call the sender (or press
Delete
)
D
Inbox options
Delete message.
Message details
Check detailed information about
the message.
Open, Create message (SMS, MMS, E-
mail), Delete, Message details, Move to
folder, Mark/Unmark, (Mark, Mark all, Un-
mark all), Exit.
Move to folder
Move the message to another folder.
33
Messages
Add to Contacts
Service data
With the sender’s address, update an
existing address entry or create a
new one.
If service data are received, copy
them with the relevant function:
Save to e-mail sett., Save to SMS sett.,
Save to Voice mail, etc.
Find
Search message for phone numbers,
e-mail addresses and Internet
addresses (URL).
Multimedia messages only
View image
Shows an attached image.
Exit
Leaves the message menu and goes
back to main menu.
Play sound clip
While playing, move joystick right/
left to increase/decrease volume.
Press Stop to stop the audio
playback.
Smart messages only
Picture message
Save the picture in a smart message
to Images. Other objects to save
may be:
Play video clip
Plays an attached video clip.
Objects
Ringtone, Operator logo, Calen. entry
Business card
Save the data to Addresses. If a pic-
ture is attached, it will be saved to
Addresses as well.
List all the different multimedia ob-
jects in a multimedia message. In the
Objects view you are offered more
Options to open, save and send
objects.
Save to bookmarks
Note
Save a bookmark to the list:
Beware of viruses and harmful software.
Do not open attachments from dubious
senders. See also Certificate management
(p. 79).
Bookmark:
E-mail notification
Tells you the number of new e-mails
in your remote mailbox. For how to
read an e-mail, see Mailbox.
34
Messages
WAP messages
My folders
The message may contain book-
marks and/or access point informa-
tion. To save both, select Save all.
To save them separately, select View
details. Then select Save to bookmarks
or Save to Settings.
MessagesKMy folders
Organise your messages in folders.
You may create new folders, rename
or delete old ones.
Templates is a special kind of folder
which contains fixed phrases. There
you can add new templates for later
use in your messages.
WAP service messages
Your provider may offer "push
messages" which are notifications of
news headlines or services. For avail-
ability and subscription details, ask
your service provider.
Note
When you are looking inside a folder, you
can simply change to other folders by mov-
ing the joystick left/right.
A WAP service message may contain
text or addresses. To view or down-
load the service select Download
message. If necessary, the phone
makes a data connection.
My folders options
Open, Create message (SMS, MMS,
E-mail), Delete, New folder, Rename fold-
er*, Exit.
* Not available for Templates folder.
35
Messages
Read new e-mail
Before an e-mail can be read, it
should be retrieved from the server.
The service provider is dialled with
the set access profile and all/new
e-mails are transmitted to the mail-
box list in your phone.
Mailbox
MessagesKMailbox
Connecting to the mailbox
OptionsKConnect
If you have not set up your e-mail
account, you will be prompted to
do so; see Settings (p. 40).
OptionsKRetrieve e-mail
New
Retrieve only new unread
e-mails.
Yes
No
Connect to your mailbox.
Read the e-mails stored in
your phone off-line.
All
Retrieve all e-mails from
your remote mailbox.
Selected Use the Mark/Unmark
function to select the
Disconnect from the mailbox
After retrieving your e-mail you
should disconnect and read your
messages off-line to save connection
costs.
required e-mails.
To read an e-mail, select the required
message in the list and press the joy-
stick to open it.
Mailbox options
Note
The functions offered depend on
your on-line or offline status.
Before getting the latest e-mail you must
always reconnect to your mailbox.
Open, Create message (SMS, MMS, E-mail),
Connect/Disconnect, Retrieve e-mail
(New, Selected, All), Delete, Message
details, Copy to folder, Mark/Unmark,
(Mark, Mark all, Unmark all), Exit.
Delete e-mail
You may delete e-mail from the
phone only or from the phone and
the remote mailbox on the server:
OptionsKDeleteKPhone only
or
OptionsKDeleteKPhone and server
View e-mail options
Reply (To sender, To all), Forward, De-
lete, Attachments, Message details, Move
to folder, Add to Contacts (Create new,
Update existing), Find, Exit.
36
Messages
Off-line
E-mail attachments
You can decide whether to connect
If an e-mail has indicated
this attachment sign,
select.
to retrieve the attachment.
Note
OptionsKAttachments
If using the
• IMAP 4 protocol, you may receive e-mail
headers, messages or messages with
attachments separately,
In the attachment view, you may
retrieve, open or save attachments
separately, if any corresponding
application is available.
• POP 3 protocol, you may decide to re-
ceive headers only, or messages with
attachments included.
Note
Beware of viruses and harmful software.
Do not open attachments from suspicious
senders. See also Certificate management
(p. 79).
Save attachments
You can save attachments separately
from the e-mail in the corresponding
application:
Retrieve attachments
OptionsKSave
Your mailbox may be setup not to re-
ceive attachments automatically.
This is indicated by a dimmed attach-
ment indicator in the e-mail.
View attachment options
Open, Retrieve, Save, Send (via Blue-
tooth, via infrared), Remove, Exit.
To receive the attachment:
OptionsKRetrieve e-mail
Open attachments
Drafts
MessagesKDrafts
In the attachment view, select the
required attachment and press the
joystick to open it.
This folder contains messages which
have not yet been sent.
On-line
Sent
The attachment is retrieved from the
server and opened by the corre-
sponding application.
MessagesKSent
sages which have been sent (to
change no. of stored messages,
see p. 42).
37
Messages
Outbox
MessagesKOutbox
Reports
MessagesKReports
Messages are temporarily stored in
this folder until they are sent.
formation are collected in this folder,
e.g. a confirmation required by
Receive report (p. 37). Each recipient
has his own report.
Status of the messages:
Sending
The message is being sent.
Waiting
This message is waiting, if there are
two similar message types in the
Outbox for sending.
Settings
Select required message type and
press the joystick.
Resend at ...
SMS
If transmission has failed, the proce-
dure will be repeated after a time-
out period.
MessagesKOptionsKSettings
KSMS
Deferred
This message is on hold.
Shows a list of all defined message
centres (to add a new entry see
p. 38).
Failed
Msg. centre in use
Select the message centre you will
use for messaging.
If the maximum number of unsuc-
cessful transmission attempts has
been reached, transmission has
failed. You can try to send the mes-
sage again by selecting OptionsK
Send.
Receive report
You are given confirmation of the
successful or unsuccessful delivery
of a sent message in the Records.
This service may be subject to a
charge.
Queued
Happens when user sends an email
and is not online at this time.
Outbox options
Create message (SMS, MMS, E-mail), De-
ferred, Delete, Message details, Send,
Move to Drafts, Exit.
38
Messages
Message validity
Reply via same ctr.
Select the period in which the serv-
ice centre tries to deliver the mes-
sage:
The reply to your message is handled
via your service centre (for informa-
tion please contact your service pro-
vider).
1 hour, 6 hours, 24 hours, 3 days, 1 week,
Maximum time *
*) Maximum period that the service
provider permits.
SMS options
Message centre, Edit, Delete, Exit.
Add recipient, Insert (Picture, Template),
Delete, Message details, Sending op-
tions, Exit.
Message sent as
Make sure that your service provider
supports the conversion formats (for
information please contact your
service provider).
Most relevant functions:
Message centresKOptions
KNew msg. centre
Text
Press the joystick, write a name
for the new service centre, then
press OK.
Normal SMS message.
Fax
Transmission via SMS.
Move joystick down and press it.
Write the number of the new short
message centre, then press OK (get
the number from your provider).
Paging
You may need to obtain
the required code number
from your service
provider.
To use the new service centre go to
Msg. centre in use and select it.
E-mail
MMS
Transmission via SMS.
Preferred connection
MessagesKOptionsKSettings
KMMS
You can choose between GSM or
GPRS as default, if supported by the
used network.
Preferred connection
the preferred connection. To define
a new access point, see Settings
p. 76.
39
Messages
Secondary conn.
Select the access point to be used as
the secondary connection.
On receiving msg.
Retr. immediately
Multimedia messages will
be retrieved instantly,
even those with the
Deferred status.
Note
Both connections (preferred and second-
ary) refer to the same Internet settings.
Only the data connection is different, e.g.
GSM data call as preferred and GPRS as
secondary. For further information please
contact your service provider.
Defer retrieval
Multimedia messages will
be saved in the service
centre for later transfer
(see Retr. immediately).
MMS reception
Only in home net.
Reject message
You will receive multi-
media messages only
when you are in your
home network.
All saved multimedia mes-
sages will be deleted by
the service centre.
Allow anon. messages
Select No: Reject all messages from
an anonymous sender.
Always on
You will always receive
multimedia messages.
Receive adverts
Receive all multimedia message
advertisements.
Off
Select if you never want
to receive multimedia
messages.
Receive report
If this function is activated, the sta-
tus of a sent message is shown in the
Records as Pending, Failed or Delivered.
Otherwise only Delivered is shown.
Note
Sending and receiving multimedia messag-
es outside your home network may incur
higher connection costs.
With settings Only in home net. and
Always on your phone can make connec-
tions in the background without your knowl-
edge!
Deny report sending
Your phone will not send delivery
reports of received multimedia
messages.
For minimize the risk you can modify the re-
ceiving functions, see below.
40
Messages
Message validity
To define a new mailbox:
Select the period in which the serv-
ice centre tries to deliver the multi-
media message:
OptionsKNew mailbox
Mailbox name
Write a name for the new mailbox.
Access point in use
1 hour, 6 hours, 24 hours, 3 days, 1 week,
Maximum time *
Choose an Internet access point
from the list (to create an access
point, see p. 76).
*) Maximum period that the service
provider permits.
Image size
You can define the image size in a
multimedia message:
My mail address
Write the e-mail address given to you
by your provider ( Press for @).
*
Large (640 x 480 pixels, VGA)
Small (160 x 120 pixels)
Default speaker
Outgoing mail server
Write the host name or the IP
address of the server that sends your
e-mail.
Sounds are played over
the built-in loudspeaker,
p. 15.
Send message
During next conn.
The e-mail will be sent the
next time you connect to
your remote mailbox.
Handset
Sounds are played over
the earpiece.
Immediately
E-mail
If you select Send message
after writing your e-mail,
a connection will be es-
tablished to send the
e-mail instantly.
MessagesKOptionsKSettings
KE-mail
To show the list of all mailboxes:
Mailboxes Press.
Send copy to self
You will get a copy of every sent
e-mail on your mail address as de-
fined above.
41
Messages
Include signature
WAP service message
Write the signature after pressing
Yes. In future a signature will be at-
tached to each mail you send.
MessagesKOptionsKSettings
KService msg.
Service messages
On or Off. Receive WAP service mes-
sages or not.
User name
Write the user name given to you by
your provider.
Password
You will receive WAP service messag-
es only from authorised sources
(p. 79).
Key in your password. If you don’t do
so, you will be prompted for it every
time you want to connect to your
remote mailbox.
Cell broadcast
Incoming mail server
MessagesKOptions
Write the host name or the IP ad-
dress of the server that receives your
e-mail.
KCell broadcast
Some service providers offer infor-
mation services (info channels). If re-
ception is activated, your "Topic list"
will supply you with messages on
the activated topics.
Mailbox type
POP3 or IMAP4.
Note
In the main view the following is
displayed:
The mailbox type cannot be changed after
the e-mail settings are saved.
• Unread, subscribed message.
• Unread, unsubscribed message.
• Topic number
Security
On or Off. Secure the connection to
your remote mailbox with protocols
POP3, IMAP4 and SMTP.
• Topic name
Retrieve attachment
Note
You can retrieve an e-mail with or
without an attachment (not shown if
e-mail protocol POP3 is set).
If GPRS connection is set to When availa-
ble, cell broadcast messages cannot be re-
ceived. To receive them, change settings to
When needed.
Retrieve headers
You can limit the number of headers
you want to retrieve. Select All or de-
fine by yourself (max. 999).
42
Messages
Settings
Reception
On/Off
Other
Save sent messages
A copy of a sent short message, mul-
timedia message or e-mail is stored
in the Sent folder.
You can activate and de-
activate the CB service. If
the CB service is activated,
the standby time of the
phone will be reduced.
No. of saved msgs.
Key in a number defining how many
messages will be stored in the Sent
folder (max. 999). When the limit is
reached, the oldest message is
deleted.
Language
All
You receive messages in
all possible languages
Selected You can choose in which
languages you want to re-
ceive messages.
Other
Choose if the required
language is not in the list.
Topic detection
On/Off Save/do not save topic
numbers automatically to
the topic list.
Cell broadcast options
Open, Subscribe/Unsubscribe, Hotmark/
Unhotmark, Topic (Add manually, Delete
all), Settings, Exit.
43
Messages
SIM messages
Service commands
You may send service commands
(known as USSD commands), to
your service provider.
MessagesKOptionsKSIM messages
To view SIM messages on the phone,
they must be copied from the SIM
card into a folder.
To send a request in standby mode
or when you have an active call:
OptionsKMark/Unmark
K(Mark, Mark all, Unmark all)
Key in the command number (s) and
press Send
then
or
OptionsKCopy
to enter letters also select
Select the required folder and
press OK.
MessagesKOptions
KService commands
Afterwards you can view the
messages in this folder p. 32.
Your service provider will supply you
with further information about this.
OptionsKDelete
Delete message(s) from the
SIM card.
44
Internet
SettingsKSettingsKAccess points
• Add a bookmark for the website.
Open Internet, then
General
CKInternet
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
In addition you can download games
and applications to your phone.
Internet access may require registra-
tion with the service provider.
OptionsKAdd bookmark
Write name and address of the web-
site and select the access point.
If necessary, check with your service
provider for details.
Bookmarks view
Settings
This list contains bookmarks which
allow fast access to the relevant URLs
(Uniform Resource Locator).
Default settings
The settings have already been
made by your service provider. Then
you may begin immediately.
Bookmarks may be indicated by the
following icons:
Home page. This is dis-
played first after connec-
tion is established.
Depends on the access
point used (p. 76).
You may request and receive set-
tings in a short message from your
provider (p. 35, p. 76). Save the
short message (smart message) to
prepare the phone for Internet ac-
cess, after which an access book-
mark will be created in Internet K
Bookmarks.
Last visited page. The last
page displayed before
disconnection is kept in
memory.
Title or Internet address of
the bookmark.
Manual setup
The access point can be set
manually.
• Define a WAP access point
(see p. 76 for further
information):
45
Internet
Most relevant functions:
Back to page
Adding a bookmark manually
OptionsKAdd bookmark
To open the Bookmarks view while
browsing, press and hold down the
joystick. To return to the browser
view again:
Fill in the fields:
Name
Describing name of URL.
Address Internet address. Press *
Back to page
for special characters.
Select.
Access point
Send
Default access point is as-
signed if no other one is
selected.
Send a selected bookmark as short
message.
Clear cache
User name Enter your user name
Password Enter your password
OptionsKSave as bookmark
All the information you have ac-
cessed during browsing is stored in
the cache memory. This includes
passwords and other confidential
data. So clear the cache after you
have accessed confidential informa-
tion.
Bookmark view options
Main view
Download, Back to page, Send (via SMS,
via Bluetooth, via infrared), Find book-
mark, Add bookmark, Disconnect, New
folder, Mark/Unmark (Mark, Mark all, Un-
mark all), Clear cache, Details (Session,
Security), Settings, Exit.
Within a bookmark
Open, Bookmarks, History, Go to URL
address, Save as bookmark, Back to
page, Save as bookmark (via SMS),
Reload, Disconnect, Clear cache, Save
page, Find (Phone number, E-mail
address, URL address), Details (Session,
Security), Settings, Exit.
46
Internet
Browser
WAP connection
Keys and commands
• To scroll the view, move the joy-
stick up and down
CKInternet
Starting
If all required settings are entered,
you can start browsing:
• To open a link, press the joystick.
New links appear underlined in
blue, visited links in purple. Links
as an image have a border.
• Select the Homepage of your
provider or a bookmark from the
bookmarks view
• To enter letters and numbers use
keys 0 to 9. For special characters
or
use the key.
*
• enter a WAP address using keys
2 to 9. The Go to field is immedi-
ately activated to take your
entries.
• To show the previous page press
Back.
• To show a list of the visited pages
of the current session:
OptionsKHistory
Press the joystick to start download-
ing the selected/written WAP page.
• To check boxes and make selec-
tions, press joystick.
• To open the contents of a cell in a
table, press joystick.
• To retrieve the latest contents
from the server:
OptionsKReload
• To open an additional command
list for the current WAP page:
OptionsKInternet options
• E press, to disconnect from a
WAP service.
47
Internet
View new WAP service messages
End
To view new messages while
browsing:
To end a WAP session and
disconnect:
OptionsKNew service msgs:
OptionsKDisconnect
Scroll to the required message and
press the joystick to download and
open it.
or
Press.
E
Save bookmarks
WAP browser settings
To save the current WAP page as a
bookmark:
CKInternetKOptionsKSettings
OptionsKSave as bookmark
Default access point
Press the joystick to get a
list of available access
points. See also Settings,
p. 76.
Save WAP pages
To view a WAP page off-line, you can
save it to the phone memory.
OptionsKSave page
Show images
To open the Saved pages list, move
the joystick right in the Bookmarks
view. To open a saved page, select
the required page and press the
joystick. If you want to retrieve the
page on-line again, e.g. to refresh
the content:
Show images during
browsing or not. If No is
selected, you can view im-
ages during browsing by
Options KShow images.
Text wrapping
If On is set long text will be
continued in the next line,
otherwise it will be trun-
cated at the end.
OptionsKReload
Note
You stay on-line after retrieving a page.
You can arrange saved WAP pages into
folders.
Font size
Choose between Large,
Normal and Small.
Cookies
Allow or Reject the sending
and receiving of cookies.
48
Internet
Conf. DTMF sending
Choose between Always
and First time only.
The WAP browser allows
you to let a call include
sending DTMF tones dur-
ing browsing. Choose if
you want to confirm be-
fore the phone sends DT-
MF tones during a voice
call.
Save receipt
Digitally signed docu-
ments can be saved to the
phone.
Connection security
If the security indicator is
displayed during a WAP
session,datatransmission
between phone and WAP
gateway is secure and
encrypted.
Note
This does not mean that communication
between phone and content server (where
the requested resource is stored) is secure.
It’s up to the service provider to secure the
path between gateway and content server.
49
Camera
To prepare the next shot, wait until
the last picture is stored. This takes a
few seconds.
Snapshot
CKCameraKSnapshot
You can take photographs with the
integrated digital camera in the
phone.
Press OptionsKDelete
A
or
if the picture does not
G
match your intentions.
Snapshot modes
The camera supports three modes.
Move the joystick left/right to toggle
between them.
The camera uses JPEG as standard-
ised image format, which can be
viewed with most available image
viewers.
Miniature
Standard
Press the Snapshot key on the side
of the phone to start the Snapshot
application. The display shows the
current view.
Full screen
Take a snapshot
Miniature
Press the camera key or the joystick
to take a picture of the current view.
It will be saved automatically in the
Images application, p. 51.
Small icon-sized picture, which can
be added to an addressbook entry.
Shown resolution 80 x 96 pixels,
storage format 80 x 96 pixels.
50
Camera
Standard
Most relevant functions:
Normal landscape mode. Shown res-
olution 160 x 120 pixels, storage for-
mat 160 x 120 pixels.
OptionsKGo to Images
Opens the Images application,
where you can view your photos.
Full screen
Advanced landscape without panes
around the picture.
Images are scaled to the phone’s
display resolution (max. 208 x
160 pixels in full screen mode).
Shown resolution 160 x 208 pixels,
storage format 480 x 640 pixels.
For further information about view-
ing pictures, see p. 51.
OptionsKSettings
Snapshot options
KImage quality
The offered functions depend on the
current situation.
The camera supports three modes:
High, Normal, Basic.
After taking a picture (camera never
enters standby in this mode):
OptionsKSettings
KDefault image name
New image, Delete, Send (via MMS, via e-
mail, via Bluetooth, via infrared), Rename
image, Image fun, Go to Images, Settings,
Exit.
You can set a standard name for tak-
en pictures to which a serial number
is added for each new snapshot. The
default name is "Image".
Before taking a picture:
Rename the images later in the
Images application as you like.
Capture, Go to Images, Settings, Exit.
Before taking a picture, with camera
in standby mode:
OptionsKSettings
Continue, Go to Images, Settings, Exit.
Store taken pictures in the phone’s
memory or on an optional MultiMe-
diaCard (p. 65).
51
Camera
View the other images in the list by
moving the joystick left/right when
an image is open.
Images
CKCameraKImages
You can view, organise and send
pictures or animations stored in your
phone.
View images
You can store pictures in your phone
memory or on an optional
MultiMediaCard. To toggle between
the two memory storage spaces,
turn the joystick left or right.
This includes pictures
• made by the Camera application,
• received in your inbox via multi-
media/picture message, as an
e-mail attachment or via infrared
or Bluetooth connection. In these
cases you must save the picture
after receiving it,
Select the required image in the im-
age list by moving the joystick up
and down.
Open an image by pressing the
joystick.
• Support for jpg, BMP, animated
GIF's and other popular formats.
Receive images
In the Images main view, you can
see a list of pictures and folders with
Images can be received via multi-
media/picture message, as an e-mail
attachment or via infrared or Blue-
tooth connection.
• the date and time of shot or
storage,
• a thumbnail picture as preview,
When saved, they are stored in the
phone memory and appear in the
Images list.
• the number of images inside a
folder.
52
Camera
Send images
Full screen
OptionsKSend
OptionsKFull screen
the following messaging services:
The whole display is used to show
the image.
via MMS, p. 29
Press the joystick to return to normal
view.
via e-mail, p. 31
via Bluetooth, p. 84
via infrared, p. 87
Focus
When an image is zoomed or shown
in full screen mode, you can move
the focus with the joystick to left/
right and up/down.
Rotate
OptionsKRotateKLeft/Right
Rotates the image 90 degrees to the
left or to the right.
Press the joystick to return to normal
view.
Black & white
To save last view:
Press Back and confirm
with Yes.
B
Displays the opened image only in
black and white to use it for picture
messages (p. 53).
Zoom
OptionsKZoom in/Zoom out
When an image is displayed you can
zoom in up to 800 percent.
Edit with Image fun
OptionsKImage fun
Press Back, to return
Opens the Image fun application
with additional functionality for edit-
ing the image. For further informa-
tion about Image fun see:
B
to normal size.
The zoom factor is not stored
permanently.
www.my-siemens.com/sx1
Delete images
OptionsKDelete
Delete the selected image(s).
53
Camera
Wallpaper
Shortcuts
Use these shortcuts for work with
images:
OptionsKWallpaper
Set the current image as background
image for the idle state.
27
38
90
45
*
Rotate left/right 90 degrees
Rename images
Scroll left and right
Scroll up and down
Zoom in and out
OptionsKRename
Give the selected image a new
name.
Toggle between full screen
and normal view.
View details
OptionsKView details
Picture message folder
Pictures which are sent to you in a
picture message are stored in the
folder Picture msgs..
Shows detailed information about
the current image.
Images list options
Open, Send (via MMS, via e-mail, via
Bluetooth, via infrared), Image uploader
(Settings), Delete, Move to folder, New
folder, Mark/Unmark, (Mark, Mark all, Un-
mark all), Rename, Receive via infrared,
View details, Add to Favourites, Update
thumbnails, Exit.
The stored black & white pictures are
displayed in grid form. They are sort-
ed in the order of time when re-
ceived, then alphabetically.
Select the required image in the im-
age list by moving the joystick up/
down and left/right.
Most relevant function:
Receive via infrared
Open an image by pressing the
joystick.
ports the IrTran-P protocol, other-
wise use the infrared application,
p. 87.
View the other images in the list by
moving the joystick left/right when
an image is open.
Note
as a supplementary storage area (p. 65).
Viewing the memory consumption,
see p. 91.
54
Camera
To save a received image go to
CKMessages
open the message, then
OptionsKSave
See also Smart messages (p. 33).
Send picture messages
To send a picture message, select
the required image and open it:
Press and enter the recipi-
D
ent’s number, or use the
addresses.
D
Press again.
55
Music
How to store a station
When a frequency is shown in the
middle of the display, store it by:
Radio
CKMusicKRadio
You can listen to the radio and store
the frequencies of your favourite
channels. For FM radio you will need
the stereo headset which also works
as an antenna. When the radio is
switched on first, you have to search
and store your favourite stations.
Long press on the required shortcut
key (3, 4, 5, 8, 9, 0).
or
OptionsKStore
Use joystick to select the required
shortcut key then press the joystick.
Quick start with Auto Scan
OptionsKAuto scan
Settings
Scan threshold: High, Medium, Low
FM mode: Stereo, Mono
Audio: Loudspeaker, Headset
Press Update and the entire band
will be searched automatically and
the 6 strongest stations will be
stored on the shortcut keys.
How to play a station
Press Back to leave Auto
scan.
A
How to search for a station
Step by step
Press the joystick up/down and the
next station will be found.
Manual tuning
OptionsKManual tuning
Move the joystick up/down to search
the band by steps of 100 kHz
Use the number keys 3, 4, 5 and
8, 9, 0 as shortcuts to your
favourites.
or
press Edit to enter a
A
frequency directly, and
confirm with OK.
56
Music
MP3 playback can be muted and
umuted by pressing the Push-to-Talk
key of the stereo headset.
FM Radio Options
Store, Auto scan, Manual tuning, Edit
name, Delete, Settings, Exit.
Most relevant options:
Edit name Enter a name instead of
the stations frequency.
Delete
Delete a stored station
from the current active
shortcut key.
or
press
button.
G
Press the Push-to-Talk key of the
stereo headset to mute and unmute
the Radio.
MP3 Player
The MP 3 player is able to play
MP 3 songs that are stored on an
optional MultiMediaCard.
The MP3 files should be located in
the directory \MP3 on the optional
MultiMediaCard.
You can copy MP3 songs from your
PC to a MultiMediaCard by using two
different ways:
1. Attach a MultiMediaCard reader to
the PC and copy files to the Multi-
MediaCard.
2.Connect the SX 1 with the PC
(using Bluetooth, Infrared or the op-
tional USB cable).
Using the Siemens PC Data Suite
software you may copy MP3 files
from your PC to the optional Multi-
MediaCard in the phone.
57
Organiser
er
Location Meeting place.
Calendar
Start time, End time and Start
date, End date
CKOrganiserKCalendar
You can enter appointments, meet-
ings and other tasks in the Calendar.
Additionally you can set an alarm for
every entry.
Type in time and date,
switch between AM and
PM by pressing any key.
Alarm
When switched on, the
fields Alarm time and Alarm
date appear. Key in time/
date if required.
Calendar offers a
• Month view,
• Week view,
• Day view.
Repeat
Select the required period
for repetition:
Time and date must be set for the
Calendar to work properly (p. 78).
Not repeated, Daily, Weekly,
Fortnightly, Monthly, Yearly
Creating an entry
Repeat until
Limit the repetition period
OptionsKNew entry
The following types of entry are
offered:
for the set alarm.
Synchronisation
It is possible to synchro-
Meeting
Appointment with specif-
ic date and time.
nise your Calendar with
your PC.
Memo
General entry for the day.
Private The entry can on-
ly be seen by you.
Anniversary
Reminder of special dates
like birthdays. These en-
tries are repeated every
year.
Public The entry can
seen by others who have
access to your on-line Cal-
endar e.g. at your work
computer.
Fill in the following fields (depend-
ing on the selected type):
None No synchronisa-
tion occurs.
Subject, Subject, Occasion
Description of the event.
58
Organiser
marked with a small triangle. The
currently selected date is marked by
a frame.
Calendar views
Icons used in day and week view:
Meeting
Memo
Anniversary
Day view
The entries of the current day are
displayed in chronological order.
Memos and Anniversaries are placed
at the top of the list.
To display/edit an entry, select it and
press the joystick.
To see the next/previous day move
the joystick to the right/left.
For the day view of an entry, select
the date and press the joystick.
Week view
Calendar options
Depends on the current situation.
The days of the week are displayed in
seven columns. Today’s day is under-
lined. Memos and Anniversaries are
placed before 8 o’clock. Meetings are
displayed with coloured bars indicat-
ing the time span.
Open, New entry (Meeting, Memo, Anni-
versary), Week view/Month view, Delete
entry, Go to date, Send, Settings, Exit.
Most relevant functions:
For the day view of an entry, select a
coloured cell and press the joystick.
Then open the entry as in day view.
Go to date
To go to a specific date,
key in the date and
press OK.
Month view
Delete entry
The weeks of the month are dis-
played in a row. Today’s date is un-
derlined. Dates with entries are
Choose between:
Before date, All entries
59
Organiser
Send
entry from day view in
vCalendar format:
Tasks
CKOrganiserKTasks
Keep a list of things you have to do.
via SMS, p. 28
via Bluetooth, p. 84
via infrared, p. 87
New note
To write a new note:
OptionsKNew task note
or
Calendar setup
OptionsKSettings
press any key 1 to 0. The editor opens
Default view
The view which is shown when the
Calendar is opened. Choose from:
with the letter you have keyed in.
Fill in the following fields:
Month view
Week view
Subject
Description of the task you want
to do.
Day view
Due date
Week starts on
Set the due date for the task.
Select starting day of the week view.
Week view title
Priority
Choose from:
Low, Normal, High
If starting day of the week is not
Monday, this option is not displayed
in the Settings.
Press Done, to save the
task.
B
Choose from:
Week number
Week dates
Priority icons
Status icons
Task done.
Task to do.
!
-
High.
Low.
(None) Normal.
Task Options
Open, New task note, Delete, Mark as
done, Exit.
60
Organiser
Today
Notes
CKOrganiserKToday
CKOrganiserKNotes
Keeps the list of entries in the calen-
dar and other current day events.
Use Notes to write short memos and
send them to other devices.
Memos, Anniversary and Meetings
are placed at the top of the list, fol-
lowed by the number of tasks and
messages.
Received text files in TXT format can
be saved to Notes.
Write a note
Press any key to start writing.
Today options
Press Done to save the
note.
B
The available today options are de-
pending on the current situation.
The following options are available if
no entry is selected.
Notes options
Open, Send (via SMS, via MMS, via Blue-
tooth, via infrared), New note, Delete,
Mark/Unmark (Mark, Mark all, Unmark
all), Add to Favourites, Exit.
Go to (Calendar, Tasks, Inbox, Records),
Create message (Short message, MMS,
E-mail), Settings (Show tasks, Show
meetings, Sort order), About, Exit.
Voice memo
• Use your phone as a dictat-
ing machine when on the move.
• Record a memo as a reminder
or as a reminder for yourself or
others.
• Record a call - useful for remem-
bering numbers or addresses
(both parties will hear a beep
every 5 seconds).
61
Organiser
Note
Calculator
The use of this feature may be subject to
restrictions under criminal law or other legal
provisions.
Please inform the other party to the conver-
sation in advance if you want to record the
conversation and please keep such record-
ings confidential.
CKOrganiserKCalculator
Enter number
M
(up to 8 digits).
Select a calculator
function: +, -, x, ÷
Enter a second number
(up to 8 digits).
M
You may only use this feature if the other
party to the conversation agrees.
Select = and press joystick
to display the result
New recording
or
OptionsKRecord sound clip
repeat procedure with
other numbers.
Press Select to start
recording.
B
Use the following keys to control
recording:
Note
#
*
Set decimal point.
Play
Scroll through basic functions.
Stop
Short press: Clears digit.
Long press: Clears the entire
number.
G
Record
Fast forward
Fast rewind
±
Toggle between "+" and "-".
MS
Save the number displayed to
memory.
Record options
Open, Record sound clip, Delete, Move to
phone mem, Move to mem. card*, Mark/
Unmark, (Mark, Mark all, Unmark all),
Rename sound clip, Send (via SMS, via
MMS, via Bluetooth, via infrared), Add to
Favourites, Settings, Exit.
MR
Retrieve the number saved.
>< View previous calculations and
move in the sheet.
Calculator options
Last result, Memory (Save, Recall, Clear),
Clear screen, Exit.
* Only if a memory card is inserted
62
Organiser
Length
Millimetres, Centimetres, Me-
tres, Kilometres, Inches,
Feet, Yards, Miles, Naut.
miles
Converter
CKOrganiserKConverter
You can convert some units of meas-
ure from one type to another. The
following types are available:
Power
Horsepower, Watts, Kilo-
watts
Tempera- Fahrenheit, Kelvin, Celsius
ture
Type
Units
Velocity Knots, Kilometres/h, Metres/
sec, Miles/hour, Feet/second
Currency See note below.
Energy Calories, Kilocalories,
Joules, Kilojoules, Hp-hours,
Kilowatt-hrs, Electronvolts
Currency settings
First you have to choose a base cur-
rency and add exchange rates.
Mass
Ounces, Pounds, Stones,
Milligrams, Grams, Kilo-
grams, Metric tons
Select the type Currency, then
OptionsKCurrency rates
Pressure Pascals, mm Hg, Atmos-
pheres, Bars
Select your required base currency
from the list, then
Time
Seconds, Minutes, Hours,
Days, Weeks
OptionsKSet as base curr.
Note
Volume Pints (UK), Fluid oz (UK), Gal-
lons (UK), Gallons (US), Liq.
pt (US), Dry pt (US), Liq. oz
(US), Gallons (US), Barrels,
Millilitres, Litres, Cubic mm,
Cubic cm, Cubic metres, Cu-
bic inches, Cubic feet
When you change the base currency, all
previously set rates will be cleared.
The rate of the base currency is always 1.
Once the base rate is set, add all the
exchange rates you need:
Scroll to the currency, key in the cur-
rent exchange rate to your base cur-
rency. Proceed until all required cur-
rencies are added.
Area
Square in, Square feet,
Square yd, Square miles,
Square mm, Square cm,
Square m, Square km, Acres,
Ares, Hectares
63
Organiser
Convert
Converter options
Select the required unit of measure
in the Type field or press the joystick
to see the available measures.
Select unit, Change currency, Conver-
sion type, Currency rates, Exit.
Select the unit from which you want
to convert in the Unit field or press
the joystick to see the available
units.
In the Amount field key in the amount
you want to convert. Select the unit
you want to convert to in the second
Unit field or press the joystick to see
the available units.
The other Amount field automatically
shows the result of the conversion.
Note
#
*
Set decimal point.
Toggle between + and - and E
(exponent).
64
Extras
Search modes
There are three search modes
available.
File Manager
CKExtrasKFile Manager
Use the phone’s file manager like a
PC file manager to organise your in-
ternal (phone memory) and external
(MultiMediaCard, optional) storage.
Enter one character (invis-
M
ible) and the selection will
be positioned at the first
matching entry.
On the MultiMediaCard you can
store files such as images, messages,
sounds and any type of applications.
OptionsKSearchKGoto
Enter a search string and the match-
ing list will be shown.
File and folder handling
You can Move, Copy, Delete a single or
several marked files.
OptionsKSearchKFilter
Enter a search string and a list of all
matching entries will be shown.
The following functions are available
when no file or folder is marked:
Sort modes
Open a file with the corresponding
application to see its Properties, or to
Rename, Move or Copy it.
Set sort criteria:
Ascending, Descending, Sort by name,
Sort by date, Sort by type, Sort by size.
File and folder options
Open, Move, Copy, Delete, Properties,
Rename, Exit.
Send
The phone offers several methods of
sending files via different transmis-
tion see the respective application:
Folder navigation
To navigate between the folder lev-
els, move the joystick left/right.
via MMS, p. 29
via Bluetooth, p. 84
via infrared, p. 87
65
Extras
Memory details
MultiMediaCard
Display details for the multimedia
card and internal phone memory,
e.g. the name, the total capacity,
free and used memory and whether
it is password protected.
Memory functions
Manage your memory card and view
relevant details.
Backup phone mem.
General File manager options
New folder, File, Search, Mark/Unmark,
Send, Sort by/order, Memory functions,
Exit.
Updates your phone memory on the
MultiMediaCard.
You can restore safed data from a
backup you have made before by us-
ing the Restore from card option.
Insert MultiMediaCard (optional)
Memory card name
Define a name for the multimedia
card.
You may use an optional
MultiMediaCard as a supplementary
storage area. To insert it into
the phone:
Format memory card
It is necessary to format your multi-
media card before first use.
• Open the battery lid on the back-
side of the phone (p. 6) to unlock
the MultiMediaCard lid.
Set password
• Push onto MultiMediaCard lid to
open it n.
Use a password to protect access to a
special multimedia card. After the
password is set, the multimedia card
is locked. Not supported by all multi-
media cards.
Remove password
Remove password protection from
multimedia card.
n
Unlock memory card
You must enter the correct password
to unlock the MultiMediaCard.
66
Extras
• Put MultiMediaCard into the slot.
The contacts on the MultiMedia-
Card must show down and to the
slot. Make sure the angled corner
Java applications
CKExtras
KJava applications
is in the correct position
.
o
Install
You can get installation files via
• Bluetooth, Infrared from a compu-
ter or phone
• multimedia message or as an
e-mail attachment
o
• download during a WAP session.
• Close MultiMediaCard lid until it
engages.
Look at possible applications e.g.
Inbox for an installation file, select it
and press the joystick to start instal-
lation.
Note
For replacing the MultiMediaCard you must
activate the option Swap memory card in
order to protect the data on the card.
Yes
Press to confirm.
A list appears, in which you can se-
lect the root or any existing folder as
destination for the new application.
During installation, the phone
checks the integrity of the software
package to be installed. Information
about the checks are displayed, with
the option to cancel the installation.
The phone informs you when the in-
stallation is finished. After that the
destination folder will be opened
and the installed application will be
highlighted.
67
Extras
Uninstall
Note
Do not install software from sources without
adequate protection against viruses and
other harmful software.
The phone only supports J2ME™ Java
applications. Do not download Personal
Java™ applications as they cannot be
installed.
You can download and install an applica-
tion immediately during a WAP session.
Note that the WAP connection is left run-
ning in the background during installation.
You can only install files with the extension
*.JAD or *.JAR.
In the Java applications select the
desired application:
OptionsKRemove
Open a Java™ application
Select the required application and
press the joystick.
Java™ application options
View details
To get information about an applica-
tion, select it:
Glossary
OptionsKView details
You will see:
JAR file (Java archive): This file includes
the executable application. When a JAR file
is activated, the application is started.
JAD file (Java descriptor): These files con-
tain information on the application (JAR file)
and their address for downloading. When a
JAD file is activated, the connection to the
Internet is established and the executable
application is loaded.
Status
Installed, Running or Down-
loaded (only in Download
view).
Version
Application version
number.
Supplier Supplier or manufacturer
of the application.
Installation options
Size
The size in kilobytes.
In the Java applications you will see
the list of all installed applications.
Yo can use the following options:
Type
Brief description of the
application.
URL
Data
Address of an informa-
tion/help page on the
Internet.
Install, View details, Delete, Settings,
Exit.
Note
Size of application data,
e.g. high scores, in kilo-
bytes.
You may use an optional MultiMediaCard
as a supplementary storage area (p. 65).
View the memory consumption, see p. 91
Memory Where the application is
stored: in the phone's
memory or on an optional
MultiMediaCard (p. 65).
68
Extras
Settings
Further options
downloading missing application
components. For how to create an
access point, see p. 76.
Only available, when the JAD file
contains an URL address.
Go to URL address
A data connection will be estab-
lished to get additional information
about the application.
Assign an access point to an applica-
tion, select the application, then:
OptionsKSettings
Update
A data connection will be estab-
lished to check if there is an update
available.
Select an access point to be used by
the application for downloading ad-
ditional data (p. 76).
Symbian and Java™ applications
OptionsKSettings
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications or software and for any direct dam-
age or consequential damage (e.g. acoustic
shock) of whatever nature resulting from the use
of these applications or software. For technical
reasons, such applications or software and sub-
sequent enabling of certain functions are lost in
the event of the device being replaced/re-sup-
plied and may be lost if it is repaired. In these cas-
es the purchaser will need to download the
application again or re-enable it. Siemens does
not warranty or guarantee or accept any liability
for the customer's ability to download or enable
applications again or to do so free of charge.
KNetwork connection
Some Java™ applications may re-
quire a data connection to be made
to a defined access point. You will be
asked for an access point if none has
been selected. The options are:
Allowed A connection is estab-
lished without notifica-
tion.
Ask first You will be asked before
the application creates a
connection.
Not allowed
No connection is allowed.
69
Extras
Alarm clock
Favourites
Use Favourites to store fre-
CKExtrasKAlarm clock
quently used functions, photos,
notes, sound files, video clips, WAP
bookmarks or saved WAP pages.
Clock settings
OptionsKSettings
See Settings/Date and time, p. 78.
In Favourites there are three default
shortcuts (not changeable):
Alarm setting
Notes, Calendar, Inbox
Use this function to set a single time
for the alarm call. The alarm sounds
even when the phone is switched
off.
To open Favourites:
CKExtrasKFavourites
Add shortcuts
Some applications offer Add to Fa-
vourites as an option.
OptionsKSet alarm
Key in the alarm time.
Select the application and press the
joystick to open it.
Turn off the alarm
When alarm is started you can:
OptionsKAdd to Favourites
Press Stop to turn off the
alarm.
A
Press OK.
B
Press Snooze or any key
B
Note
to interrupt the alarm for
A shortcut in Favourites is automatically
updated if you move the item it is pointing
to, e.g. from one folder to another.
5 minutes. Youcanrepeat
this up to 5 times.
Note
Favourites Options
Open, Edit shortcut name, Shortcut icon,
Delete shortcut, Move, List view/Grid
view, Exit
The phone switches on automatically when
the alarm time is reached. After you have
pressed Stop, you can continue working
with the phone by pressing Yes.
Clock options
Set alarm, Reset alarm, Remove alarm,
Settings, Exit.
70
Extras
Most relevant functions:
Service numbers
Open
Service Numbers are special
phone numbers saved on the SIM
card by the service provider. They
cannot be edited or deleted. You can
call local or nationwide information
services or use services of the service
provider.
The selected file is opened in the cor-
responding application.
Edit shortcut name
Change name of the shortcut.
This does not affect the file it is
referring to.
Shortcut icon
L
SIM services
Select an individual icon for a short-
cut (not available for default short-
cuts).
Your service provider may offer spe-
cial applications such as mobile
banking, stock market, etc. via the
SIM card.
SIM Phonebook
SIM Phonebook application
lets you manage phone numbers
stored on your SIM card.
If you have such a SIM card the SIM
services will appear at the end of the
Extras menu or directly above the
control key (on the left).
You can edit or delete them, add
new entries or copy them to Con-
tacts.
Symbol of the SIM services:
SIM details tells you how many en-
tries there are on your SIM card.
If there is more than one application
they are displayed in the SIM services
menu.
See Contacts, p. 19.
SIM fixed dial
CKExtrasKSIM services
Phone numbers can be stored
in protected locations on a special
SIM card. A PIN 2 is needed for
editing. Ask your service provider
therefore.
With the SIM services menu, your
phone is ready for the future and will
support additions to your service
provider's user package. For further
information, please contact your
service provider.
71
Profiles
General
Setup
Profiles are audio settings,
which can be personalized in order
to adapt the phone to different envi-
ronments such as noisy places, or
quite areas.
Edit a default profile or create a new
personal profile:
CKProfiles
Select default profile or personal
profile.
If a profile is used, several settings
are made with one function, in order
to adapt the phone to the noises of
the environment, for example.
OptionsKPersonalise
Select the item you want to change
and press the joystick to open/
change it:
Six standard profiles are provided
with default settings. They can be
changed however:
Ringtone
Select a tone from the list.
General (default)
Mute
"Ringtone, line 1"
"Ringtone, line 2"
Only available if Line in use (p. 75) is
active.
Meeting
Outdoor
Pager
Incoming call alert
Ringing, Ascending, Ring once,
Beep once, Silent.
Activate
Ringing volume
Set the volume level.
Message alert tone
CKProfiles
Select a profile.
OptionsKActivate
Select a tone from the list.
The default mode used is preselect-
ed when the phone is switched on.
73
Setup
The phone is reset to the default val-
ues (factory setting). This does not
apply to SIM card and network setup.
All private documents and data re-
main unaffected.
Phone
CKSetupKSettings
KPhoneKSelect a function:
General
By running reset, some settings will
be lost. The most important ones are
device settings, bluetooth settings,
call settings (except call waiting),
text editiong settings, converter val-
ues.
Phone language
Set the language of the display text.
When Automatic is set, the language
of your service provider is used.
Writing language
The default code for reset the phone
to the factory settings is 12345.
The selected language affects:
• characters, when writing text
• dictionary used
Standby mode
Wallpaper
Select your individual background
photo for standby mode from the
images saved on the phone or on the
optional MultiMediaCard.
T9 input
Not available for all languages.
See "Writing Text", p. 16.
Welcome note or logo
The following is displayed when you
switch the phone on:
Left softkey /Right softkey
Change the function for each key.
Select a new one from the list.
Default
Display
Default image/animation.
Text
Contrast
Write a note (max. 50 letters).
Make contrast lighter/darker.
Image
Colour palette
Select an individual photo from the
list.
Choose between Blue Sky, Beach, City
and Red.
Orig. phone settings
(Security code protected)
74
Setup
Screensaver
Choose between:
Screensaver
CKSetupKScreensaver
Date and time
The actual date and time is shown.
For adjusting see p. 78.
The screensaver will be activated af-
ter a specific (free adjustable) time
out. Any user action or phone event
will deactivate the screensaver.
Text
Enter a desired text up to 15 charac-
ters.
Animation
• Default animation
Not changeable.
mated GIF file from the folder Images
(p. 51) or from the MultiMediaCard
(p. 65).
Screensaver preview
A preview of the current setting is
shown.
Screensaver timeout
Set the time after which the screen-
saver should become active. The
range is from one minute to 30 min-
utes in steps of one minute.
Note
Animated screensavers reduce the stand-
by time.
75
Setup
Shortcut
Activates speed dialling function
(p. 92).
Call
CKSetupKSettings
KCallKSelect a function:
Anykey answer
When activated, you can press any
key to accept an incoming call.
Send my caller ID
L
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service providers).
Line in use
L
This function is only displayed if it is
supported by the service provider.
Two independent phone numbers
must be registered on the phone.
Call waiting
L
During a call, you may be advised
that there is another call waiting.
You will hear a special tone during
the call. If you are registered for this
service, you can check whether it
is set and you can activate/deacti-
vate it.
Select the phone line you want for
daily use. Calls can be answered irre-
spective of the selected line.
Short press to change left
0
softkey. Press softkey to
switch between the lines
in standby mode.
Automatic redial
When activated, busy numbers will
be automatically redialled up to
10 times. End with:
End key.
E
Shows duration and costs of last calls
(needs activation of Call cost limit,
p. 27).
76
Setup
New access point
Connection
OptionsKNew access point
Use default settings
You need access points to
access the Internet for example to
If you want to use default entries.
Use existing settings
If you want to change an existing en-
try to create a new access point, se-
lect it from the list.
• send/receive e-mails (p. 31)
• send/receive multimedia
messages (p. 29)
• use WAP applications (p. 44)
• activate modem operation
There are three types of connection
available:
To connect to an access point, a data
connection is need. There may be ac-
cess points predefined by your pro-
vider. Otherwise your provider will
supply you with further information
on this.
GSM data call
Data transmission rate up to
14.4 kbps.
To configure this access point:
• Connection name: your choice
• Data bearer: GSM data
• Access point name: from provider
• User name: from provider if required
• Prompt password: choose Yes if you
want to key it in every logon
CKSetupKSettingsKConnection
KSelect a function:
Access points
A list of default or defined access
points may be shown. Select an ac-
cess point from the list or define a
new one.
• Password: from provider if required
• Authentication: normal/Secure
• Gateway IP address: from provider
• Homepage: address of WAP service or
multimedia messaging centre
• Session mode: e.g. Permanent
• Connection security: from provider
• Data call type: analogue, ISDN v.110,
ISDN v. 120
Note
In order to setup your phone for WAP, MMS
and Email, you can use the SMS Service.
We recommend that you contact your net-
work operator to send you the configuration
message.
• Maximum data speed:
automatic, 9600, 14400
Alternatively, you can go to
www.my-siemens.com/customercare
and Siemens will send you the configura-
tion message.
If you open the message and save it, the re-
ceived settings are automatically used as
Preferred connection, see Messages,
p. 38.
77
Setup
GPRS connection
CKSetupKSettingsKConnection
KSelect a function:
(General Packet Radio Service)
With packet data technology which
connects only to send/receive data in
packets.
GPRS
The setup data are needed for all ac-
cess points using GPRS.
To configure this access point:
• Connection name: your choice
• Data bearer: GPRS
• Access point name: from provider
• User name: from provider
• Prompt password: choose Yes if you
want to key it in every logon
• Password: from provider if required
• Authentication: from provider
• Gateway IP address: from provider
GPRS connection
• When available Always use GPRS for
text/data communication (if the network
supports it)
• When needed Use only GPRS if an appli-
cation/action needs it to work
Access point
If you want to use your phone as a
modem to your computer, an access
point name is needed.
Advanced Setup
If editing an access point:
Data call
OptionsKAdvanced settings
CKSetupKSettingsKConnection
Your provider will supply you with
further information on this if
necessary.
• Phone IP address: from provider
• Primary name server: from provider
• Second. name server: from provider
• Use callback: data phone number
• Callback type: from provider
• Callback number: from provider
• Use PPP compression: from provider
• Use login script: from provider
• Login script: insert login script
• Modem initialisation: using AT modem
commands. From provider.
KData call
The setup data are needed for all
access points using a (high speed)
data call.
Online time
The data call is switched off after a
time-out period.
• User defined: Key in a period in minutes
for time-out
• Unlimited: No time-out
Access point options
Edit, New access point (Use default set-
tings, Use existing settings), Delete, Exit.
78
Setup
Date separator
Select from:
Date and time
settings
CKSetupKSettings
KDate and time settings
KSelect a function:
.
:
/
-
Time format
12-hour or 24-hour.
The clock is set once at start-up the
phone first time. Afterwards you
may modify it by using the following
features.
Time separator
Select from:
.
:
Time
Enter the time. Setting of
Clock type
Analogue or Digital.
M
HH
the time format:
Hours (2-digit)
MM
Minutes (2-digit)
Auto time update
L
The phone gets the current time,
date and time zone via the network.
Date
Enter the date. Setting of
the date format:
M
DD
Day (2-digit)
Month (2-digit)
Year (4-digit)
MM
YYYY
Date format
Select from:
mm dd yyyy
dd mm yyyy
yyyy mm dd
79
Setup
Closed user group
L
Security
If offered by the service provid-
CKSetupKSettings
er, this service enables groups to be
formed. These have access for exam-
ple to internal (company) informa-
tion or special tariffs apply to them.
Check with your service provider for
details.
KSecurity
KSelect a function:
Phone and SIM
The phone and SIM card are protect-
codes.
Confirm SIM services
The phone can be set to display con-
firmations when using a SIM card
service.
PIN code request, PIN code, PIN2 code
and Security code see p. 11.
Autolock period
Certif. management
If set, the phone locks after a time-
out you can define. Key in a number
for minutes. To unlock you must en-
ter the security code.
There is a list of authorised certifi-
cates stored in your phone. These
are used for verifying the origin of
WAP pages and installed software.
Lock if SIM changed
(Security code protected)
L
You need a certificate, for example
• to work with an online bank or an-
other server to transfer confiden-
tial information,
Your phone is prevented from being
used with a different SIM card.
SIM fixed dial
• to protect against viruses.
(PIN 2 protected)
L
Note that a certificate is not a protec-
tion in itself. It needs to be checked
for authenticity and trustworthiness.
Dialling is restricted to the
numbers on the SIM card, new en-
tries are not possible. If only area
codes are entered, the relevant
phone numbers can be added to
these manually before dialling.
Dialling is restricted to those num-
bers area of the SIM (selection of SIM
numbers). Refer to fixed dialing
numbers, page p. 70.
80
Setup
Certificate details:
Call barring
Certificates have a restricted
CKSetupKSettings
lifespan. To be sure that the identity
of a WAP gateway or a server is cor-
rect, check the signature and the cer-
tificate. You will be informed on the
phone’s display if something is
wrong. One of the following advi-
sors may appear:
KCall barring
KSelect a function:
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit
password which your service provid-
er will give you. You may need to
be registered separately for each
barring.
Expired certificate, Certificate not valid
yet, Certificate corrupted.
Trust settings
First select a certificate. A list of ap-
plications which can use this certifi-
cate is shown. Before changing any-
thing make sure that you can trust
the owner of this certificate and that
it belongs to the owner on the list.
Outgoing calls
All outgoing calls except emergency
numbers 112 and 999 are barred.
International calls
Only national calls can be made.
Certification Mgmt. Options
Certificate details:, Delete, Trust settings,
Mark/Unmark, (Mark, Mark all, Unmark
all), Exit.
International calls except to
home ctry.
International calls are not permitted.
However you can make calls to your
home country when abroad.
Incoming calls
The phone is barred for all incoming
calls (the diverting of all calls to the
mailbox offers a similar effect).
81
Setup
Incoming calls when abroad
Network
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
CKSetupKSettings
KNetwork
Network selection
If Automatic is activated, the phone
searches for and selects the next
available network.
Check status
The following information can be
displayed after a status check:
If Manual is activated, a network can
be selected manually from the list of
available GSM networks.
• Barring set.
• Barring not set.
• Status unknown (e.g. new
SIM card).
Cell info display
When on, the phone indicates that it
is used in a Micro Cellular Network
(MCN) and receives cell information.
Cancel all barrings
All barrings are cleared. A password
which the service provider will give
you is needed for this function.
82
Setup
Car Kit
Indication on the display when
connected:
Accessory settings
CKSetupKSettings
KAccessory settings
KSelect a function:
Car Kit Basic.
Headset
Car Kit Portable/Comfort.
Indication on the display
when connected.
Active profile
automatically be activated. You can
select one of the standard profiles
(p. 71).
Additionally charging indications
will be shown, when connected.
Default profile
tomatically be activated. You can se-
lect one of the standard profiles
(p. 71).
Automatic answer
Factory default: Off
Automatic answer
Factory default: Off
On/Off
Calls are accepted auto-
matically after a few
seconds (except whenthe
ringer is switched off or
set to beep). You should
therefore be wearing the
headset if Auto answer is
activated.
On/Off
Calls are accepted auto-
matically after a few sec-
onds. Eavesdropping is
possible!
Automatic settings:
• Vibrating is switched off.
• Keylock is switched off. See key
#
Eavesdropping is
possible!
on (p. 5).
• Phonelock is switched off. To un-
lock you must enter the security
code (p. 79).
Integrated features:
• Accept call with the call key or
PTT key.
• Activate voice dialling by long
press the PTT key.
83
Setup
Divert conditions
The following conditions for call di-
verting are available:
Call divert
You can set the conditions
for which calls are diverted to your
mailbox or other numbers. For de-
tails contact your service provider.
All voice calls, If busy, If not answered, If
out of reach, If not available, All fax calls,
All data calls.
You can set divert as follows:
The most common condition for call
divert is: If not answered
Check status
OptionsKCheck status
Check whether the divert is activated
or not.
CKSetupKCall divert
If not answered
Select.
Cancel diverts
Activate Select, then choose:
All set diverts are cleared.
To voice mailbox
to divert to your voice
mailbox number (p. 88)
or
To other number
Enter another number to
which calls should be di-
verted.
Select the delay time after which a
call should be diverted.
Press OK. After a short
B
pause, the setting is con-
firmed by the network.
84
Setup
First Use
When you use this application for
the first time, you may assign a
Bluetooth™ name to it.
Bluetooth™
Bluetooth™ is a short-range
radio system. It permits wireless
communication between different
terminal devices equipped with
Bluetooth™ such as phones, phone
accessories, printers and PCs.
M
Use the default name or
write a new one (max.
30 letters.
Press OK.
B
Settings
CKSetupKBluetooth™
Bluetooth™
On/Off
You must activate
Bluetooth™ in order to
establish a Bluetooth™
connection between your
mobile phone and other
Bluetooth™ devices.
Every Bluetooth™ device has a
My phone's visibility
unique address and name. This is
how it is guaranteed that the intend-
ed communication partners can con-
nect. The security concept is based
on a password that both devices ex-
change when they connect for the
first time. These "trustworthy" part-
ners can be included in a list. The
password prompt is no longer neces-
sary for future connections.
All
If set, the phone can be lo-
cated by other Bluetooth™
devices whenever you
switch your phone on.
Hidden
If activated, your own
phone cannot be located
by other Bluetooth™
devices.
My Bluetooth name
Assign a (Bluetooth™) name to your
phone. This name can be seen by
other Bluetooth™ devices within the
possible range.
85
Setup
Select the partner you want to con-
Note
nect with.
When searching for other Bluetooth™
devices, you may see only their unique
Bluetooth™ addresses (when no name
was given). To see your unique address,
enter in standby mode: *#2820#
Press Select. The item you
want to send is copied to
the Outbox.
B
Connecting is shown.
Sending via Bluetooth™
M
If "Pairing" is required by
the other device, you
must enter a password.
The default password is
0000. Give it to the part-
ner, for its unique use.
Subsequently this device
is trusted.
To send an item via Bluetooth™, you
must first select it in its application
(for example, CameraKImages,
select an image). Then:
OptionsKSendKvia Bluetooth™
Your phone starts to search for other
Bluetooth™ devices. If Bluetooth is
turned off, you will be asked if you
want to turn it on.
Now the connection
should be established.
Sending data shown.
All found partners are shown on the
display with a device icon, their Blue-
tooth™ name and the device type.
Trusted partners are indicated by an
After the message has
been sent, the Bluetooth™
connection will be ended
automatically.
icon
.
Note
Note
An existing list of devices may appear, if
you have already searched for other devic-
es. In this case select More devices.
Icons for devices are:
Computer
Phone
from the Outbox.
Data received via Bluetooth™ are stored in
the Inbox, p. 32.
Status icons:
Bluetooth™ active.
Connection is active.
Car Kit
headset
Other
Unknown
Stop
Press to interrupt search and
work with devices already
found.
86
Setup
Set as authorised
Paired devices view
OptionsKSet as authorised
CKSetupKBluetooth
Paired devices can be set as author-
ised to allow them a connection to
your device without your knowl-
edge. This status is useful for your
own devices, such as your computer
or your Bluetooth headset for exam-
ple. Authorised devices are indicated
Communication with paired devices
is more convenient and quicker.
Pairing with a device
Move the joystick to the right to view
the paired device list.
OptionsKNew paired device
by
.
Your phone starts to search for other
Bluetooth™ devices, or a list of devic-
es appears if you have already
searched for other devices.
Paired devices options
New paired device, Assign short name,
Set as authorised/Set as unauthorised,
Delete, Delete all, Exit.
Select the partner you want to con-
nect with.
Receive via Bluetooth™
Bluetooth™ must be activated.
When you receive a message via
Bluetooth™, you will be asked for
acceptance.
Press Select.
B
Enter password required
by the selected partner
device (see "Sending via
Bluetooth™" above). The
device is added to the
paired device list.
M
is shown if Bluetooth message
is accepted. The message is stored in
the Inbox, p. 32. Unread Bluetooth™
messages are indicated by
.
Assign short name
After the message has been re-
ceived, the Bluetooth™ connection
is ended automatically.
OptionsKAssign short name
Define a short name or alias for bet-
ter recognition of certain devices af-
ter searching. These names are only
visible to you and not to other
Bluetooth™ users.
87
Setup
Infrared
CKSetupKvia infrared
Modem
CKSetupKModem
Your phone has an infrared inter-
face. You can use this to exchange
data (e.g. address entries, business
card, notes) with other devices that
are also equipped with an infrared
interface.
To use your phone as a fax modem,
you first have to establish a connec-
tion to an other device via Infrared or
Bluetooth™.
Connecting via Infrared
The infrared interface is on the upper
left side of the phone. The infrared
ports of the sending and receiving
devices must be pointing at each
other and the distance between
them must not exceed 30 cm.
To activate the connection via
Infrared:
OptionsKConnect
To disconnect an established
connection:
To send an item via Infrared, you
must first select it in its application.
Then:
Press Disconn.
B
Connecting via Bluetooth™
OptionsKSendKvia infrared
Items received via infrared are stored
in the Inbox, p. 32.
The connection must initiated by the
The control of the connection hap-
pens via the Bluetooth™ application
(p. 84).
Note
Status icons:
Received Items in the Inbox.
Connection is active.
88
Setup
Voice mailbox
CKSetupKAudio
CKSetupKVoice mailbox
Edit the current profile (see also
p. 71).
Most service providers offer you an
external answering service. In this
mailbox, a caller may leave a voice
message for you
Ringtone
Select a tone from the list.
• if your phone is switched off or
not ready to receive,
Note
"Ringtone, line 1"
"Ringtone, line 2"
Only available if Line in use (p. 75) is
active.
• if you are making a phone call
(and if Call waiting is not activated,
p. 75).
Incoming call alert
Ringing, Ascending, Ring once, Beep
once, Silent.
• if diverted calls are saved on your
voice maibox (see Divert, p. 83).
If the voice mail service is not part of
your service provider's user package,
you will need to register and the set-
tings must be made manually. The
following description may vary
slightly depending on the service
provider.
Ringing volume
Set the volume level.
Message alert tone
Select a tone from the list.
Vibrating alert
On/Off
You can use the following options to
call your mailbox or to change the
number of the mailbox:
Keypad tones
Set the volume level.
Warning tones
Call voice mailbox
Call this phone number to listen to
the voice mails left for you. To set it
up:
On/Off
Alert for
All calls or for specified groups.
Change number
Enter the phone number
M
you will call to listen to
your voice mails.
89
Setup
Divert number
Listen to
Calls are diverted to this phone
number. If all calls are diverted to
voice mailbox:
A new voice mail can be displayed as
follows:
To call your mailbox (in standby
mode):
Indication on the display
To set it up:
CKSetupKCall divert
Select a divert option, for
1
or
press, then
D
example: If busy, to divert
calls when your number is
busy.
just press
1
long.
If you are asked for the voice mailbox
number:
OptionsKActivate
Voice mailbox
Select To voice mailbox
Key in the number.
M
Press OK.
B
Press OK. Registration at
the network will be con-
firmed after some sec-
onds.
B
or
store the mailbox number for future
use, see as follows.
90
Setup
Other phone number
Manager
Select To other number
CKSetupKManager
Key in the phone number
you want to divert to.
Install or remove applications and
software packages. You can only use
Symbian device software installation
files with the extension ".SIS" (to in-
stall Java™ applications, see p. 66).
M
B
Press OK. Registration
at the network will be
confirmed after some
seconds.
When you open Manager, a list is
displayed of:
Note
Find
Press to select the divert
number from the Addresses.
• partially installed application.
• installed applications.
Password
To get informations like name, ver-
sion, type, etc. about an application,
select the corresponding list entry:
Your voice mail may request a password
every time you call it. In this case you may
want to add it as a DTMF number after the
voice mail number.
OptionsKView details
For example, +55 11223344p1234#
where 1234 is the password and p inserts
a pause.
To display the security certificate of a
software package:
OptionsKView certificate
Move the joystick to the right to see
the Memory view.
Note
Do not install software from sources without
other harmful software.
See also "Symbian and Java™ applica-
tions", p. 68.
To help you, the software installation sys-
tem uses digital signatures and certificates
on software packages.
See also Certificate management, p. 79
91
Setup
Installing applications
Removing applications
An application you want to install
must be suitable for the Symbian op-
erating system. Application packag-
es are normally compressed files
which contain several component
files.
Select the application:
CKSetupKManager
KOptionsKRemove
Yes
Press to confirm.
Note
Before removing software, make sure that
• no other application is dependent on it,
• no documents need it to work with.
Note
Before you install an update for an existing
application, be sure that you have a backup
or the original software package. Otherwise
you cannot restore the original application.
Manager options
View details, View certificate, Manager,
Remove, View log, Send log, Exit.
Before restoring the original, remove the in-
stalled application.
Most relevant functions:
You can get installation packages via
View log
• Bluetooth™, Infrared from a com-
puter or phone.
See what application packages have
been installed or removed and
when.
• multimedia message or as an
e-mail attachment.
• download during a WAP session.
Viewing memory consumption
Select the required installation
package.
In the ManagerKOptions view, you
can see the memory consumption
of:
Press the joystick to start installation.
Calendar, Contacts, Documents, Mes-
sages, Images, Sound files, Video clips,
Java apps., Mem. in use, Free memory.
If memory is getting low, remove
some files or applications.
Note
The phone warns you when installing soft-
ware without digital signature or certificate.
Continue only if you are sure of the origin
and the contents of the software package.
During installation, the phone
checks the integrity of the applica-
tion package to be installed. Infor-
mation about the checks are dis-
played, with the option to cancel the
installation.
92
Setup
When the shortcut selection is
Shortcut
saved, a symbol followed by an as-
terik can be seen next to the number
in the contacts entry. If a thumbnail
is assigned to the phone number, it
will be displayed in the grid.
CKSetupKShortcut
Digit keys 2 to 9 can be used as
shortcut numbers. If a phone
number is assigned, it will be called.
If an application is assigned, then
this will be started.
Application
A list of available applications is
shown. Select the required entry.
Number 1is reserved for voice
mailbox access.
A
Press Select.
How to use the shortcuts
Press and hold shortcut
number (in standby
mode).
–
29
or
CKSetupKShortcut
Select a shortcut number
in the grid by moving the
joystick. Start action with
a press on the joystick.
Assign
Clear
OptionsKAssign
Select the entry to be removed from
the shortcut key.
A list with available categories is
shown. Choose for the required
entry:
OptionsKClear
Phone number
Shortcut options
Only numbers saved under Contacts
can be assigned as shortcut. Select
the required entry. Press the joystick
to open the entry and scroll to a
number.
Depends on the current situation.
Assign, Call, Change, Clear, View details,
Exit.
A
Press Select.
93
Questions & Answers
ns &
If you have any questions about using your phone, visit us at
www.my-siemens.com/customercare any time.
In addition we have listed some frequently asked questions and answers below.
Question
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed
long enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in the display.
Clean contacts.
Battery contacts dirty.
See also below under:
"Charging error"
Standby time is too Frequent use of the
Restrict use if necessary.
short.
organiser and games.
Animated screensaver
activated.
Deactivate animated screensaver (p. 74)
Unintentional keystrokes Activate key lock.
(illumination!).
Charging error
(charge icon not
displayed).
Battery totally discharged. 1) Plug in charger cable.
2) Wait up to 2 hours until the charge icon is displayed.
3) Charge battery as usual.
Temperature out of range: Make sure the ambient temperature is right, wait a
5 °C to 40 °C.
while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and device interface, clean
No mains voltage.
Wrong charger.
Battery faulty.
Use different mains power socket, check mains voltage.
Only use original Siemens accessories (p. 6).
Replace battery (p. 103).
SIM error.
SIM card not correctly
inserted.
Make sure that the SIM card is correctly inserted (p. 6).
SIM card contacts dirty.
Clean the SIM card with a dry cloth.
Use 3 V SIM cards only.
SIM card with wrong
voltage.
SIM card damaged
(e.g. broken).
Inspect the damage. Return the SIM card to service
provider.
94
Questions & Answers
Question
Possible causes
Signal weak.
Possible solution
No connection to
network.
Move higher, to a window or open space.
Check service provider coverage map.
Contact the service provider.
Check barrings (p. 80).
Outside GSM range.
SIM card not valid.
Network barring is set.
Network overloaded.
Signal too weak.
Try again later.
Phone loses
network.
Reconnection to another service provider is automatic.
Switching the phone off and on may speed this up.
Calls not possible.
2nd line set.
Set line 1 (p. 75).
New SIM card inserted.
Charge limit reached.
Credit used up.
Check for new restrictions.
Reset limit with PIN 2 (p. 27).
Load credit (p. 27).
Certain uses of the Call restrictions are set.
phone not possible.
Barrings may be set by your service provider.
Check barrings (p. 80).
work.
not set.
Memory low.
Phone memory full.
Delete stored messages, images or applications.
Insert in right direction (p. 65).
MultiMediaCard
error.
Card inserted in wrong
position.
Function cannot
be set.
Not supported by service Contact your service provider.
provider or registration
required.
Snapshot pictures in camera lens polluted
bad quality.
Clean camera lens with a smooth rag.
Message cannot
be sent.
Some service providers do Check with your service provider.
not support this service.
Phone number of the serv- Set message centre (p. 28).
ice centre is not set or is
wrong.
SIM card contract does not Contact your service provider.
support this service.
Service centre overloaded. Repeat message.
No selection from address- Entry has no phone number (p. 20).
es possible.
Addressee does not have Check, if the receiver has a compatible phone.
a compatible phone.
95
Questions & Answers
Question
Possible causes
Possible solution
Messages cannot be Phone memory full.
Delete stored messages or images.
Check settings for specific message type.
received
Wrong settings.
No Internet access Wrong WAP profile set or Check settings (p. 44), if necessary consult your service
possible.
settings wrong, incomplete. provider.
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) provided with the SIM
card according to the instructions. If the PUK (MASTER
PIN) has been lost, contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 96).
Contact your service provider.
Service provider
code error.
No authorisation for this
service.
No fax possible.
Incorrect settings in
the PC.
Check settings.
No authorisation for this
service.
Contact your service provider.
Contact your service provider.
Charge counter does Charge pulse not
not work.
transmitted.
Damage
Severe shock.
Remove battery and SIM and insert them again. Do not dismantle phone!
Phone became wet. Remove battery and SIM card. Dry immediately with cloth, do not heat. Dry connec-
tor contacts thoroughly. Stand unit upright in an air current. Do not dismantle phone!
Reset settings to the factory default: # 7780 #. Enter security code, see p. 11.
*
96
Customer Care
r
If repair work is necessary, please contact
one of our service centres:
We offer fast, individual advice!
You have several options:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy ................................................02 24 36 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg.........................................43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Our online support on the Internet:
www.my-siemens.com/customercare
We can be reached any time, any place.
You are given 24 hour support on all
aspects of our products. Here you will find
an interactive fault-finding system,
a compilation of the most frequently asked
questions and answers, plus user guides
and current software updates to
download.
You will also find the most frequently
asked questions and answers in the
section entitled "Questions & Answers"
(p. 93) in this user guide.
You can also get personal advice about our
range of products on our Premium Hotline:
United Kingdom .................. 09069597500
(0.75 £ per minute)
Qualified Siemens employees are waiting
to offer you expert information about our
products and installation.
In some countries repair and replace
services are impossible where the products
are not sold through our authorised dealers.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the
*
software version (to display, press # 0 6 #,
*
then info) and if available, your Siemens
Service customer number.
97
Customer Care
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman........................................................79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam...........................................84 89 30 01 21
Zimbabwe ............................................04 36 94 24
98
Care and maintenance
Your phone has been designed and
crafted with great care and attention
and should also be treated with care.
The suggestions below will help you
to enjoy your phone for many years.
• Do not use harsh chemicals, clean-
ing solvents, or strong detergents
to clean the phone!
ance
• If your phone has an integrated
camera, the lens should be
cleaned only with a dry, soft cloth
or brush.
• Protect your phone from moisture
and humidity! Precipitation, hu-
midity and liquids contain miner-
als that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power sup-
ply and remove the battery!
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary, re-
pair the device.
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store the phone in hot are-
as. High temperatures can shorten
the life of electronic devices, dam-
age batteries and warp or melt
certain plastics.
• Do not store your phone in cold ar-
eas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form in-
side the phone, which may
damage electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can dam-
age internal circuit boards!
99
Product data
data Declaration of conformity
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone
(under the battery):
Siemens Information and Communi-
cation mobile hereby declares that
the phone described in this user
guide is in compliance with the
essential requirements and other
relevant provisions of European
Directive 1999/5/EC (R&TTE).
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you re-
quire a copy of the original.
..............................................................
Customer Service number of the service
provider:
..............................................................
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to pre-
vent misuse.
Technical data
GSM class:
GSM 900/1800/1900
Weight:
116 gr
Dimensions:
109 x 56 x 19 mm
(110 ccm)
Li-Ion battery:
1000 mAh
Operating
temperature:
-10°C - +55°C
SIM card:
3V
SAR value:
0.52 W/kg
100
SAR – European Union (RTTE)
INFORMATION ON RF EXPOSURE /SPE-
CIFIC ABSORPTION RATE (SAR)
This involves measuring the maxi-
mum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power lev-
el. The actual SAR level of the phone
during normal operation may be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
n
TTE)
THIS MOBILE PHONE MEETS THE
LIMITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO ELECTRO-
MAGNETIC FIELDS
These limits are part of comprehen-
sive recommendations for the pro-
tection of the public. The recom-
mendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies*. The limits include a sub-
stantial safety margin designed to
assure the safety of all persons, re-
gardless of age and health.
The highest SAR value for this model
phone when tested for compliance
against the norm is
0.52 W/kg****.
The SAR information can also be
found on the Siemens web site at
www.my-siemens.com
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the legal
requirements.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the re-
spective technical limit require-
ments must be demonstrated. Only
then the CE mark may be affixed**.
The limit for mobile phones recom-
mended by the Council of the Euro-
pean Union employs a unit of meas-
urement known as the Specific
Absorption Rate, or SAR. This SAR
limit is 2,0 W/kg***. This corre-
sponds with the requirements of the
International Commission for Non-
Ionizing Radiation Protection ICNIRP
and was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
Further information:
www.who.int/peh-emf, www.mmfai.org,
www.my-siemens.com
phones is determined in accordance
with the European Norm EN 50361.
101
SAR – European Union (RTTE)
** The CE mark confirms that the
product is in compliance with the le-
gal requirements of the European
Union as a prerequisite for the plac-
ing on the market and the free
movement of goods within the Euro-
pean internal market.
*** averaged over 10g body tissue.
**** SAR values may vary depend-
ing on national requirements and
frequency bands. SAR information
for different regions can be found at
www.my-siemens.com
102
SAR – International (ICNIRP)
ter- INFORMATION ON RF EXPOSURE /SPE-
CIFIC ABSORPTION RATE (SAR)
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
THIS MOBILE PHONE MEETS THE
LIMITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO ELECTRO-
MAGNETIC FIELDS
The highest SAR value for this model
phone when tested for use at the ear
is
Your mobile phone is a radio trans-
mitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequen-
cy (RF) energy recommended by in-
ternational guidelines from the In-
ternational Commission on Non-
Ionizing Radiation Protection (IC-
NIRP). These limits are part of com-
prehensive guidelines for the protec-
tion of the public and establish
0.52 W/kg***.
SAR information can also be found at
www.my-siemens.com
While there may be differences
between the SAR levels of various
phones and at various positions,
they all meet the international
guidelines for safe RF exposure.
permitted levels of RF energy for the
population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific
studies*. The limits include a sub-
stantial safety margin designed to
assure the safety of all persons, re-
gardless of age and health.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
Further information:
www.who.int/peh-emf, www.mmfai.org,
www.my-siemens.com
The exposure limit for mobile
phones employs a unit of measure-
ment known as the Specific Absorp-
tion Rate, or SAR. The SAR limit stat-
ed in the international guidelines is
2.0 W/kg**. Tests for SAR are con-
ducted in all frequency bands using
standard operating positions with
the phone transmitting at its highest
power level. The actual SAR level of
the phone during operation can be
well below the maximum value. This
** averaged over 10g of tissue.
*** SAR values may vary depending
on national requirements and fre-
quency bands. information for dif-
ferent regions can be found at
www.my-siemens.com
103
Accessories
ries
Basics
Car Solutions
Li-Ion Battery 1000mAh EBA-540
Travel Charger
ETC-500 (Euro)
Car Charger ECC-500
Charger for the cigarette lighter socket in the
car. It supports either 12 or 24 volt DC.
Car Kit Portable HKP-500
ETC-510 (UK)
Handsfree kit with integrated loudspeaker
and microphone and auto answer feature.
Simply plug into the cigarette lighter socket.
Ideal for mobility between vehicles.
Travel charger with an extended input volt-
age range of 90-264V.
Headset PTT HHS-550 (Stereo)
Like Headset (Mono), but additionally stereo
functionality for music.
Mobile Holder Antenna HMH-530
To be used in combination with a Car Kit
Portable and as an upgrade to the Car Kit
Comfort.
Belt Case FCT-510
Gives you a secure grip and protects your
phone.
Car Kit Basic HKB-500
Headset PTT Bluetooth™
HHB-505 (with Euro charger)
HHB-515 (with UK charger)
HHB-525 (with Australian charger)
Convenient and smart headset without the
hindrance of a cable. Can be used on any
phone that supports the Bluetooth Headset
profile.
Allows handsfree talking and simultaneously
charges the mobile phone in the car.
Features a Car Charger, a Headset PTT and
a Y adapter.
Car Kit Comfort HKC-530
Handsfree kit with first-class digital call qual-
ity and utmost ease of use. Includes all com-
ponents needed for installation. The
individual antenna solution can be obtained
from your specialist dealer.
Data
Car Kit Upgrade HKO-540
Data Cable USB DCA-540
To connect the phone to the USB port of
the PC.
To upgrade the Car Kit Comfort from
Siemens mobile phone series before
55 generation.
SyncStation DSC-510
Optional Car Kit accessories
Table cradle for your mobile phone. Allows
data exchange and simultaneously charges
the phone on the power supply unit at home.
Features a Data Cable USB and a
Y adapter.
VDA Adapter Cable HKO-560
Products can be obtained in specialist
shops. Visit our online shop under:
Original Siemens Accessories
104
State-Battery quality statement Display quality statement
Quality Statements
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss. As a
result the operating time of your mo-
bile phone may be considerably re-
duced, even after a full recharge of
the battery.
Discoloured white or black dots may
appear on the display. This is a de-
sign-related feature of the screen.
Standard ISO 13406-2:2001 regu-
lates how many defective pixels or
subpixels are acceptable. Siemens
has complied with this standard and
satisfies the following requirements:
• maximum number of defective
white pixels: 2
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
• maximum number of defective
black pixels: 2
• maximum total number of defec-
tive pixels: 5
In addition, there may be no more
than 4 defective bright pixels in a
diameter of 10 mm.
If the screen on your phone does not
satisfy these requirements, please
contact Siemens Service, p. 96.
105
Guarantee certificate (UK)
ee Without prejudice to any claim the user (cus-
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guaran-
tee shall attempt to limit or exclude a Cus-
tomers Statutory Rights, nor the
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer's Guarantee under the condi-
tions set out below:
e
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either re-
place the device with another device re-
flecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
manufacturer's liability for death or personal
injury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper treat-
ment and/or failure to comply with
information contained in the user manuals.
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee de-
fault becoming evident.
• Ownership of devices or components re-
placed by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. The
Guarantee is issued by Siemens plc, Sie-
mens House, Oldbury, Bracknell, Berk-
shire, RG12 8FZ.
106
Guarantee certificate (IRL)
ee Without prejudice to any claim the user (cus-
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee de-
fault becoming evident.
• Ownership of devices or components re-
placed by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the Republic of Ireland the
Guarantee is issued by Siemens Ireland
Limited, Ballymoss Road, Sandyford In-
dustrial Estate, Dublin 18 - The Republic of
Ireland.
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the condi-
tions set out below:
e
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either re-
place the device with another device re-
flecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casing), this
warranty shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper care
or use and/or failure to comply with infor-
mation contained in the user manuals. In
particular claims under the Guarantee
cannot be made if:
• The device is opened (this is classed as
third party intervention)
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer’s liability for death or personal in-
jury resulting from its negligence.
• Repairs or other work done by persons not
authorised by Siemens.
• Components on the printed circuit board
are manipulated
• The software is manipulated
• Defects or damage caused by dropping,
breaking, lightning or ingress of moisture.
This also applies if defects or damage was
caused by mechanical, chemical, radio in-
terference or thermal factors (e.g.: micro-
wave, sauna etc.)
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
• Devices fitted with accessories not author-
ised by Siemens
To invoke this Guarantee, please contact the
Siemens helpdesk on 1850 777 277. This
number is also to be found in the accompa-
nying user guide.
A
Conference .................................13
Auto time update........................ 78
Automatic redial ......................... 75
B
Contrast......................................73
Battery
Bluetooth ................................... 84
C
Call
set up ..................................... 75
timers..................................... 26
transfer................................... 14
waiting ............................. 13, 75
Divert..........................................83
Drafts..........................................36
DTMF tones.................................14
108
E
E-mail
settings................................... 40
Line in use ..................................75
inbox ......................................32
MMS
Music..........................................55
Mute...........................................14
My folders (messages).................34
F
Favourites .................................. 69
File Manager .............................. 64
G
GPRS
Groups ....................................... 22
H
accessory.............................. 103
I
Infrared ...................................... 87
Installing software ...................... 91
J
JAD/JAR file................................. 67
Java™......................................... 66
N
Network (setup) ......................... 81
Sent items...................................36
O
Outbox (messages)..................... 37
P
shortcut ..................................92
Phonebook (contacts)................. 19
PIN code
Product data............................... 99
PUK, PUK2 .................................. 11
Q
R
protect....................................11
remove barring........................11
services...................................70
Reply via same centre ................. 38
Ringing volume .............. 15, 71, 88
Ringtone ........................ 24, 71, 88
110
SMS
Summary after call...................... 75
Switch on/off.............................. 10
Switching between
Voice mailbox .............................88
Volume control ...........................15
T
Welcome note or image ..............73
Writing language.........................73
Writing text.................................16
Technical data ............................ 99
Today ......................................... 60
To-do (tasks) .............................. 59
Troubleshooting ......................... 93
|