right page (1) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:27)
1
Table of Contents
Table of
Emergency number (SOS) ................ 7
Codes .............................................. 9
Dialling with number keys .............. 10
Redial ............................................ 10
Accept call ..................................... 10
Handsfree ...................................... 11
Special characters .......................... 12
Text entry with T9 .......................... 12
Text modules ................................. 13
<New entry> .................................. 14
Call (search for an entry) ................ 14
Change entry ................................. 14
<New entry> .................................. 15
Change entry ................................. 15
Call (search for an entry) ................ 15
Voice dialling ................................. 15
Groups .......................................... 15
Contents
Ringer setting ................................ 20
Silent alert ..................................... 20
Volume ......................................... 20
More tones... ................................. 20
Profiles .......................................... 22
Display .......................................... 23
Call setup ...................................... 23
Connectivity .................................. 24
Security ......................................... 25
Network ........................................ 26
Accessories ................................... 27
Calendar ....................................... 27
Appointments ............................... 27
Notes ............................................ 28
Time zones .................................... 28
See also In-
dex at the end
of this User
Guide
See also Index at the end of this User Guide
right page (3) of AX72 Pegasus-DTC, FUG, en A31008-H2860-A1-1-7619 (06.10.2005, 08:18)
3
Safety precautions
All electrical and electronic products
should be disposed of separately
from the municipal waste stream via
designated collection facilities ap-
pointed by the government or the lo-
cal authorities.
This crossed-out wheeled bin sym-
bol on the product means the prod-
uct is covered by the European
Directive 2002/96/EC.
The correct disposal and separate
collection of your old appliance will
help prevent potential negative con-
sequences for the environment and
human health. It is a precondition for
reuse and recycling of used electrical
and electronic equipment.
For more detailed information about
disposal of your old appliance,
please contact your city office, waste
disposal service or the shop where
you purchased the product.
The phone may cause interference
in the vicinity of TV sets, radios
and PCs.
Use only Siemens original accesso-
ries. This will avoid potential risks to
health or property and ensure com-
pliance with all relevant regulations.
Improper use will invalidate the guarantee! These
safety instructions also apply to Siemens original
accessories.
As mobile devices offer a range of functions,
they can be used in positions other than the
head, such as on the body. In this case, separa-
tion distance of 1.0 cm is required.
left page (4) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:18)
4
Overview of the phone
Overview of the phone
Display indicators
Signal strength/GPRS/battery level.
1
Soft keys
2
Press the soft key to call up the function
that is displayed as §Text§ or icon on the
greyAfields above the key.
_
ª
g
Service provider
Call key
3
Dial displayed phone number or name,
accept calls. In standby mode: Display the
last Bcalls.
On/Off/End key
4
switch on.
During a conversation or in an
17.04.2005
09:15
Menu
NewMMS
•
•
•
Switched off: press and hold to
application: press briefly to finish.
In menus: press briefly to go back a
level. Press and hold to return to
standby mode.
•
In standby mode: press and hold to
5swNaitvcih-keoyff phone.
In lists and menus:
GScroll up and down.
Function call.
D
Back a menu level.
C
During a call:
Press and hold
6
*
Increase volume.
E
•
In standby mode: switch on/off all
signal tones (except alarm).
For incoming calls: only switch off ring
tones.
Decrease volume.
F
In standby mode:
•
EVoice control (press and hold).
Open Addressbook/Phonebook.
F
ꢀ
Press and hold
In standby mode: switch key lock on/off.
7
CGOPpReSnimnfeon.u.
D
Plug socket
For charger, headset, camera etc.
8
right page (5) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:27)
5
Display symbols
Display symbols
Display symbols (selection)
«
Activated and available
_
Signal strength
Registered
ª
h
Charging
Temporarily interrupted
ꢂ
d
Battery charge level, e.g. 50%
Internet online
Ê
Addressbook/Phonebook
è
Internet via GPRS online
Ë
Call records
Z
Internet no network
Ì
É
ç
]
ꢀ
ꢁ
Ñ
m
n
Surf & fun/Service provider portal
Organizer
Auto answer feature on
±
Orguaniser symbols (selection)
Messages
Memo
Ring tones
Call
v
Extras
Meeting
w
Own stuff
{
Birthday
Setup
È
Anniversary
Call(s) is/are diverted
Ringer off
Access with left soft key (selection)
j
…
Û
\
ꢃ
Message received
Short ring (beep) only
k
MMS notification received
Ringtone only, if the caller is stored in
the Addressbook/Phonebook
l
Voice message received
Unanswered call
Ø
Alarm set
Depending on the service provider, some of the
symbols shown here may vary from those in the
phone.
Alarm clock activated
Ö
µ
Keypad locked
Message memory full
No network access
T
²
ABC/
Indicates whether upper or lower-
case letters are active
Abc/abc
Text input with T9
T9Abc
left page (6) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
6
Getting started
Insert the battery sideways into the
phone 6, then press downwards 7
until it engages.
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film. Remove this film before get-
ting started. The service provider supplies
you with a SIM card on which all the im-
portant data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
7
6
8
To remove, press the retaining tab
then lift the battery out.
Place cover on phone and push to the
upper edge, until it clicks into place
8
Press depression
cover downwards in the direction of the
arrow 2.
to remove the
1
.
9
1
9
2
Insert SIM card
the locating slot (make sure the angled
corner is in the correct position 4).
and push it fully into
3
Always switch off phone before removing
the battery!
Only 3V and 1.8V SIM cards are support-
ed. Please contact your service provider if
you have an older card.
5
Charge battery
3
4
The battery is not fully charged when de-
livered. Plug charger cable into the bot-
tom of the phone, plug power supply unit
into a mains power socket and charge for
at least two hours. The power supply unit
heats up when used for long periods. This
is normal and not dangerous.
To remove the SIM card push the card
here 5.
right page (7) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
7
Switch on/off, PIN
Switch on/off, PIN
Switch on/off
Press and hold the On/Off/End key Bto
switch on or off.
Enter PIN
The SIM card can be protected with a
4- to 8-digit PIN.
Enter the PIN using the number keys. The
characters ****appear to ensure no-
body can read your PIN on the display.
Correct errors with §Clear§.
When charging is in progress h is
displayed.
Charging time
An empty battery is fully charged after
about 2 hours. Charging is only possible
within a temperature range of
+5 °C to +40 °C. If the temperature ris-
es/falls 5 °C above/below this, the charge
symbol flashes a warning. The mains
voltage specified on the power supply
unit must not be exceeded (Operating
Confirm your input with §OK§. Logging on
to the network will take a few seconds.
Emergency number (SOS)
Only to be used in real emergencies!
By pressing the soft key §SOS§ you can
make an emergency call on any network
without a SIM card and without entering a
PIN (not available in all countries).
Charge icon not visible
If the battery has been discharged fully
the charge icon is not immediately visible
when the power supply unit is plugged
in. It will appear after up to two hours. In
this case the battery is fully charged after
3-4 hours.
Switching on your phone for the
first time
Only use the power supply unit provided!
Time/date
Display while in service
Charge level display during operation
Set the clock to the right time once at
start-up.
Press §Yes§. First enter the date
(day/month/year), then the time
(24 hours, including seconds). Press §OK§.
The time and date are updated.
If the battery is removed for longer than
30 seconds, the clock will be reset.
(empty - full): a d g.
A beep sounds when the battery is nearly
empty. The charge level of the battery is
only displayed correctly after an uninter-
rupted charging/discharging cycle. You
should therefore not remove the battery un-
necessarily and where possible not termi-
nate the charging process early.
Time zones
Set the time zone for your area.
Select the required time zone from list
with G. Apply with §Set§.
left page (8) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
8
General instructions
Phonebook or Addressbook
Without SIM card
If you switch on the phone without
a SIM card you can still use some phone
functions.
You can choose whether you want to use
the Phonebook on the SIM card or the in-
ternal Addressbook as standard.
You can copy the SIM card Phonebook to
the Addressbook on the phone. Please do
not interrupt this procedure. During this
time do not accept incoming calls. Follow
instructions in the display.
To copy data on the SIM card at a later
these with the function Copy into 9
(Phonebook options menu).
Press §Menu§. The functions are displayed
(e.g. Emergency, SOS).
Menu control
The steps needed to reach a function
are shown in a condensed form in this user
guide.
E.g. to display call list for missed calls:
Z
Press §Menu§ ¢
You can change the default book at any
¢Calls missed ¢§Select§.
This comprises the following steps:
Signal strength
Open main menu, select Z, then select
the function Calls missed. You have to
confirm with §Select§.
_
Strong reception signal.
^
A weak signal reduces the call
quality and may lead to loss of
the connection. Change your
location.
Standby mode
Very often function descriptions begin in
standby mode.
The phone is in standby mode and is ready
for use when the name of the service
provider appears on the display.
General instructions
Press and hold the On/Off/End key B
to return to standby mode from any
situation.
User guide
The following symbols are used to explain
operation:
Enter numbers or letters.
J
On/Off/End key.
B
A
Call key.
Press navigation key on the side
indicated.
D
Displays a soft-key function.
§Menu§
Function depends on the service
provider, special registration
may be necessary.
L
right page (9) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
9
Standard functions
Press §Unmark§ to unmark a highlighted
entry.
Additional highlighting functions:
Standard functions
Option menus
Menu functions are made available in op-
tions menus. A selection of functions that
occur frequently is shown here.
Mark all
Highlight all entries.
Unmark all
Delete highlighting on all
marked entries.
Press §Options§ to open menu.
Delete
All selected entries are deleted.
marked
Edit
Open the entry to edit.
Display available capacity.
Display entry.
Capacity
View
Security
m
§Menu§ ¢
¢Security
Delete/
Delete all
Delete entry/delete all entries
after confirmation.
¢Select function.
The phone and SIM card are protected
against misuse by several security codes.
New entry
Send MMS
Send via...
Create new entry.
Send entry as MMS message.
Keep these confidential numbers in a safe
place where you can access them again if
required.
Select transmission service and
medium for sending.
Codes
Save
Sort
Store entry.
PIN control
Set sort criteria
(alphabetical, type, time).
You can stop the PIN prompt being
activated when the phone is switched on,
but you then risk unauthorised use of the
phone.
Press §Change§. Enter PIN and confirm
with §OK§.
Text input
T9 preferred: Activate/
deactivate T9 input.
Input language: Select
language for text.
Rename
Rename selected entry.
Change PIN
You can change the PIN to any 4- to 8-dig-
it number you find easier to remember.
Enter current PIN and confirm with §OK§.
Enter new PIN twice and confirm each
time with §OK§.
Highlighting mode
With some applications (e.g. Phonebook)
one or more entries in a list can be high-
lighted to perform multiple functions at
once.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Press §Options§ ¢Mark text.
Press §Mark text§ to highlight an unmarked
entry.
left page (10) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
10
Calling
Short press §Clear§ to clear the last digit, a
long press clears the entire phone
number. To dial press the Call key A.
End call
Press the End key Bbriefly. Press this
key even if the person on the other end of
the line has hung up first.
Change phonecode
You define the phone code (4-8 digits)
when you call up a protected function for
the first time. It is then valid for all phone-
code protected functions. If the wrong
code is entered three times then the
phone will be locked. Contact Siemens
Customer Care for instructions on how to
unlock your pone.
Set volume
Clear SIM card barring
Use navigation key Eto start adjusting
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your serv-
ice provider with the SIM card, according
to instructions. If the PUK (MASTER PIN)
has been lost, please contact your service
provider.
the volume during conversation. Set vol-
ume with navigation key
If a Car Kit is used, its volume setting will
not affect the usual setting on the phone.
.
G
Redial
To redial numbers that were dialled previ-
ously, press the Call Key Aonce, pick up
the required phone number from the list
with G, then press Aagain.
Preventing accidental activation
Even if PIN control is deactivated confir-
mation is required to switch on the phone.
This prevents the phone from being
switched on accidentally, e. g. when car-
ried in a pocket or whilst you are on an
aircraft.
Press and hold the On/Off/End key B
and confirm with §OK§. The phone
switches on.
If the number is busy
Press §Auto dial§ for automatically dialling
the phone number ten times at increas-
ing time intervalls or press §Call back§ (L)
for phone ringing when the busy number
is free. Press §Prompt§ and a beep reminds
you to redial the dispayed phone number
after 15 minutes.
Accept call
Calling
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press §Answer§
or A.
Dialling with number keys
The phone must be switched on (standby
mode). Dial number (always with area
code, if necessary with international dial-
ling code). To dial international dialling
code press and hold 0until a "+" is dis-
played. Press §+List§ and select country.
Please make sure you have accepted the call
before holding the phone to your ear. This will
avoid damage to your hearing from loud ring
tones!
right page (11) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
11
Text entry
A phone number transmitted by the net-
work is displayed or the corresponding
name if it is contained in the Phonebook
may also appear (settings p. 15).
The current call is set on hold. With y
menu§ ¢Conference you can join the held
call when the connection is established.
Repeat this procedure until all partici-
pants are linked together.
All calls in the conference are ended si-
multaneously when the End key Bis
pressed.
Reject call
§Reject§ or Bpress briefly.
Handsfree
You can put the phone aside during a call.
You can then hear the caller via the
loudspeaker.
Activate handsfree function with §Handsfr.§
and switch on with §Yes§.
Direct call
If this is active, only one number can be
dialled.
§Menu§ ¢m ¢Security ¢Direct call
Press Dand enter phone code. The
phone code (4- to 8-digits) is set by you
and entered at the first security setting.
Please note this code down (see also p. 9)!
Confirm code input with §OK§. Press
§Change§ and enter number (press · to
select phone number from the Adress-
"On" with §OK§.
Adjust the volume with E. Pressing
§Handsfr.§ switches off "handsfree talking".
Always switch off "handsfree talking" before
holding the phone to your ear! This will avoid
damage to your hearing!
Swapping between 2 calls
b
To dial, press and hold the right soft key.
Make a new connection during a call with
y menu§ ¢Hold ¢J(dial a new phone
number). With y menu§ ¢Swap you can
swap back and forth between both calls.
To switch direct call off, press and hold ꢀ.
Enter phone code and confirm with §OK§.
Press §Change§ and Confirm Off with §OK§.
If you are called during a phone call and
you can hear the "call waiting tone"
(p. 23), you can accept the waiting call
with §Swap§,putting the current call on
hold to do so.
Swap back and forth between the calls
see above or end the current call with B
and accept the new call with §Answer§.
Text entry
Text entry without T9
Press number key repeatedly until the re-
quired letter appears. After a brief interval
the cursor will advance. Example:
2
Press once briefly to type the let-
ter a, twice to type b, etc. Press
and hold to write the number.
Conference
b
Call up to 5 parties and link them togeth-
er in a conference call. Make a new con-
nection during a call with y menu§ ¢Hold
¢J(dial a new phone number).
Ä,ä,1-9 Umlauts and numbers are dis-
played after the relevant letters.
left page (12) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
12
Text entry
§Clear§
Press briefly to delete the letter
before the cursor, press and hold
to erase the whole word.
Move the cursor
(forwards/back).
Text entry with T9
"T9" deduces the correct word from the
individual key entries by making compari-
sons with an extensive dictionary.
H/G
ꢀ
Activate, deactivate T9
Press briefly: Swap between abc,
§Menu§ ¢] ¢Message setup
¢T9 preferred ¢§Change§ (activate/
deactivate T9).
T9
T9
T9
Abc, abc, Abc, ABC, 123.
Status shown in top line of
display.
Select Input language
Select the language in which you want to
Press and hold: All inputvariants
are displayed.
compose your message.
*
0
Press briefly: Special characters
are shown.
Press and hold: Open input menu.
Press once/repeatedly:
. , ? ! ’ " 0 - ( ) @ / : _
§Menu§ ¢] ¢Message setup ¢Input
language ¢§Select§ (the new language
is set)
Languages with T9 support are marked
with the T9 symbol.
Press and hold: Writes 0.
Write a word using T9
Writes blank. Press twice = jumps
1
Since the display changes as you proceed,
it is best if you finish a word without look-
ing at the display.
Simply press the keys once only where the
relevant letter is located. For "hotel", for
example:
a line.
Special characters
Press *briefly. The character map is
displayed:
1)
¿
¡
_
;
.
,
?
)
!
+
Press briefly ꢀfor T9Abc then
-
"
’
:
*
/
(
46835and 1(the blank ends a word).
¤
]
¥
{
Do not use special characters such as Ä
but rather use the standard characters,
e.g. A; T9 will do the rest for you.
$
}
€
~
Λ
@
<
\
&
>
Σ
#
|
[
£
%
Θ
=
Π
^
Ψ
§
Γ
∆
Ξ
Φ
Ω
Additional information
1
) Line break
Set a full stop. A word is conclud-
0
Navigate to characters with G,Hand
ed if it is followed by a space.
Within a word, a full stop repre-
sents an apostrophe or hyphen:
e.g. §provider.s§ = provider’s.
press §Select§.
Input menu
Press and hold*with text input. The input
Text format (SMS only), Input language, Mark
Go to the right. Ends a word.
D
menu ist displayed:
text, Copy/Add
right page (13) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
13
Text entry
Press briefly: Swap between: abc,
Abc, abc, Abc, 123. Status
shown in top line of display.
Press and hold: All input modes
are displayed.
Press briefly: Select special
characters (p. 12).
Press and hold: Open input menu
®
ꢀ
*
T9 Text Input is licensed under one or more of
the following:
T9
T9
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
T9 word suggestions
If several options are found in
the dictionary for a key sequence
(a word), the most probable is displayed
first. If the word you want has not been
recognised, the next suggestion from T9
may be correct.
Text modules
Text modules can be stored in the phone
for adding to your messages (SMS, MMS).
Write text modules
]
§Menu§ ¢
¢Text modules
The word must be §highlighted§. Then press
». The displayed word is replaced
with a different word. If this word is also
incorrect, repeat until the correct word is
displayed.
¢<New entry> ¢
(write text
J
module) ¢§Save§ (Accept the default
name or give it a new name, then save
with §OK§)
To add a word to the dictionary, select
§Spell§. Now write the word without T9-
support and accept with §Save§ into the
dictionary.
Use text modules
J(write message text) ¢§Options§
¢Text modules ¢G(select text mod-
ule from the list) ¢
(confirm Text
D
module) ¢§OK§.
Correct a word
Words written with T9:
With Hmove left or right, word
by word, until the required word is
§highlighted§.
The predefined text is inserted into the
text to the left of the cursor.
With » scroll through the T9 word
suggestions again. §Clear§ deletes the char-
acter to the left of the cursor and displays
a new possible word!
Words not written with T9:
With Hmove letter by letter to the
left/right. §Clear§ deletes the letter to the
left of the cursor. New characters are
inserted at the cursor position.
left page (14) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
14
Default book
Default book
Phonebook
§Menu§ ¢è ¢Select function.
Entries in the Phonebook (on the SIM
card) are managed separately from those
in the Addressbook. You can, however,
exchange data between the Phonebook
and the Addressbook.
Show entries
Entries in the standard directory
(Addressbook or Phonebook) are shown
for selection.
Select a name by entering the first letter
Jand/or scroll G. To dial press the
Call key A.
<New entry>
If the Phonebook is set as standard
(Addressbook as standard, p. 15):
<New entry>
Open Phonebook (in standby mode)
Create new entry in standard directory.
Phonebook, Addressbook (see below).
F
¢<New entry> ¢Select entry field
(The maximum number of characters
available is displayed at the top of the
screen)
Default book
Select the Phonebook (only one phone
number possible per entry) or the Ad-
dressbook as your standard directory (de-
fault book). Your preference should be for
the Addressbook, because more entries
and functions (e.g. pictures, birthdays,
several phone numbers per entry, etc.)
are possible.
Number: Always enter phone number with
dialling code.
Name: Enter first and/or last names.
Group: Phone numbers may be assigned
to the VIP group.
Location: Select the storage location SIM
or Protected SIM (PIN2 required).
Record no.: Is automatically assigned to
D
F
¢Phonebook / Addressbook ¢
(set as standard)
the entry.
Press §Save§ to store the new entry.
Groups
Call (search for an entry)
Businesscard
Open phonebook F, select name and
Create your own business card. Send it as
an SMS/MMS to another GSM-phone.
If no business card has been created yet,
you will be asked for your input.
and press the Call key A.
Change entry
F
D
¢Select entry ¢
¢Change
GMove from field to field to put in
¢Make changes ¢§Save§.
your details. Press §Save§.
<Special books>
Information numbers
<Own numbrs>: enter personal phone
numbers, <VIP numbers>: assign important
numbers to group, <SIM phonebook>,
<Protected SIM>, <Info numbers>.
Information numbers are stored here in
accordance with the respective service
provider.
right page (15) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
15
Addressbook
Call (search for an entry)
Addressbook
Open Addressbook F, select name and
and select phone number (if the entry has
several numbers stored) press A.
The Addressbook can store up to
500 entries that are managed in the
phone memory.
Voice dialling
<New entry>
If the Addressbook has been selected as
standard:
Dial numbers by voice command. Up to
20 recorded names for voice dialling or
the mobile (not on the SIM card).
Open Addressbook (in standby mode)
F
¢D¢J(enter first and/or
Record
last name) ¢Select entry field ¢Make
Open Addressbook (in standby mode).
F¢Select entry (first letter and/or
scroll) ¢§Options§ ¢Voice dialling
further entries ¢§Save§.
Group
Entries can be organized by groups. Se-
lect with §Change§.
¢(Select phone numbers if there are
more than one) ¢§Record§ ¢§Start§.
Picture
A short signal sounds. Now speak the
name. After a second beep and message
in the display, repeat the name. A beep
now confirms the recording, which is
saved automatically.
Press §Select§. Assign a picture to an Ad-
dressbook entry. It is displayed if you are
called by the corresponding phone
number.
Birthday
Apply voice dialling
After entering the date of birth, the "re-
minder box" can be activated. You can
now enter the time for the reminder. The
phone will then remind you with an ac-
coustic tone and also with a display
one day before the birthday and on the
birthday.
Press and hold E(in standby mode).
Now speak the name. The number is
dialled.
Groups
Nine groups are specified in your phone
to enable you to arrange your Address-
book entries clearly.
You can rename seven groups:
Open Addressbook (in standby mode)
All fields
Press §Select§. Show all input fields if the
display was previously reduced (§Options§,
Field setup).
F
¢<Groups> (the number of entries
Change entry
is listed behind the group name)
¢Select group ¢D¢Rename group
F
¢Select entry ¢§View§ ¢§Edit§
¢Make changes ¢§Save§.
left page (16) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
16
Records
Additional information
Duration/charges
b
No group: Contains all Addressbook en-
tries that do not belong to a group (name
cannot be changed).
Received: Contains vCard Addressbook
entries received by SMS (name cannot
be changed).
Display charge details and the duration of
different types of calls while you speak, as
well as setting a unit limit for outgoing
calls.
§Menu§ ¢Z ¢Duration/charges
Select function: Last call, All outgoing calls,
Group symbol
All incoming calls, Remaining units
Assign to a group a symbol that appears
on the display when one of its members
calls you.
§Select§
§Reset§
§OK§
Display data.
Clear display.
End display.
D
Select group ¢
¢Group symbol
¢Select symbol ¢ §OK§.
Charge setting
§Menu§ ¢Z ¢Duration/charges
¢Charge setting
Records
Currency (PIN2 prompt)
b
b
b
Your phone stores the phone numbers of
calls for convenient redialling.
Currency for charge display.
Personal rate (PIN2 prompt)
Charges per unit/period.
§Menu§ ¢Z ¢§Select§ ¢Select call list
and confirm ¢Select phone number
¢A.
Account limit (PIN2 prompt)
Fix a credit/usage period on a special
SIM card.
Calls missed
The phone numbers of calls that you have
received but not answered are stored for
call back purposes. ꢃ is shown on the
Auto display
Display duration and charge automatical-
ly at end of each call.
dCiaslplslaryefcoerivmeidssed calls in standby mobde.
Accepted calls are listed.
Calls dialled
In standby mode you have access to the
last numbers dialled with A.
Delete records
The records are deleted.
Call list menu
§Options§ ¢Edit entries.
right page (17) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
17
Voice message/mailbox
Listening to message
b
Voice]message/mailbox
Most service providers offer a mailbox, in
which a caller may leave a voice message
for you
A new voice message can be announced
as follows: An \ icon with beep or …
a text message announces a new voice
mail or you receive a call with an
automatic announcement. Dial into your
mailbox and listen to your message(s).
§Menu§ ¢
¢Message setup
¢Voice message
Press and hold 1(if necessary enter mail-
box number once only). Confirm with §OK§
and §Mailbox§ depending on your service
provider.
•
if your phone is switched off or not
ready to receive,
if you do not want to answer,
•
•
if you are making a phone call (and Call
CB services
b
You may have to register for this service
with the service provider and enter the
settings manually.
]
§Menu§ ¢
¢Message setup
¢CB services
Some service providers offer information
services (info channels). If reception is ac-
tivated, your "Topic list" will supply you
with messages on the activated topics.
Settings
b
The service provider supplies you with
two phone numbers:
Save mailbox number
Call this phone number to listen to the
voice messages left for you.
]
§Menu§ ¢
¢§OK§
¢Message setup ¢Voice
message ¢
(enter mailbox number)
J
Save call divert number
Calls are diverted to this phone number
§Menu§ ¢
¢Phone setup ¢Divert
¢e.g., All Unanswered ¢Set ¢J
(dial divert number) ¢§OK§ (register
number at the network). Divert will
be confirmed after a few seconds
(see also p. 23).
left page (18) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
18
SMS
Receive/read SMS
An arrival of a new SMS is announced on
display with …. To read the SMS, press
left soft key.
SMS
You can transmit and receive very long
messages (up to 760 characters) on your
phone. They are automatically composed
of several "normal" SMS messages (note
higher charges).
With Gyou scroll through message line
by line. Select §Reply§ for a direct reply.
Additionally you can insert pictures and
sounds in an SMS.
Depending on the service provider,
e-mails and faxes can also be sent and
e-mails received via SMS (change setting
if necessary, p. 19).
SMS archive
§Menu§ ¢] ¢SMS archive
The list of SMS messages stored in the
phone is displayed.
Writing and sending
MMS
New SMS
]
§Menu§ ¢
¢
¢J(write
The Multimedia Messaging Service ena-
bles you to send texts, pictures (also pho-
tos) and sounds in a combined message
to another mobile phone or to an e-mail
address. All elements of an MMS message
are merged to form a "slide show".
text) ¢A¢·/J(enter phone
number or select from Address-
book/Phonebook) ¢§OK§.
The SMS is sent to the service centre for
transmission.
§Clear§ briefly to delete letter by letter, press
and hold to delete an entire word.
Depending on your phone's settings, you
will receive either the complete message
automatically or notification that an MMS
has been saved in the network, giving
sender and size details. You may then
download it to your phone to read it.
Ask your service provider whether this
service is available. You may need to reg-
ister for this service separately.
Special functions
SMS to group
You can send an SMS message as a
"circular" to a recipient group.
§Options§ ¢Send ¢§Group§ ¢Select
group ¢Select group members and
send SMS.
Writing/sending MMS messages
An MMS consists of the address header
and the content.
Picture&sound
Insert pictures and sounds into message.
§Options§ ¢Picture&sound ¢select
section and entry.
The menu contains:
Fix animations, Fix sounds, Own animation,
§Menu§ ¢] ¢New MMS
Input fields:
To:
·/JPhone number/
e-mail address of recipient(s).
Own pictures, Own sounds
Subject: Enter MMS heading (up to
40 characters).
right page (19) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
19
Message lists/settings
Picture: §Insert§. The picture list is opened
The MMS Editor starts. Simply complete
the following input fields:
for selection.
Text:
§Edit§. Write text with the help
of T9.
To:
· /JTelephone number/
e-mail address of the recipient/s.
record a new melody (see
below).
Subject: Title of the MMS (maximum of
40 characters).
The MMS is now ready to send:
Slide duration:
§Options§ ¢Send
Receive/read MMS
An arrival of a new MMS/notification of
an MMS is announced on display with
… / Û. Press the left soft key to read
the MMS or notification.
Enter length of display
for individual pages
(minimum 0.1 seconds).
New recording
The phone records via its microphone.
Press §Insert§ in the Sound: field when com-
pleting the input fields. Select Record new.
Press §Record§. The current recording dura-
tion and available time remaining are dis-
played. To end recording press §Stop§.
Depending on the setting, (p. 20) the
•
•
complete MMS is received
or the notification is opened. Press
§Receiving§ to receive the complete MMS,
with §Play§ automatic presentation of
the MMS. Cancel using any key.
G
Rename recording: Options§ ¢
Scroll
¢Confirm with §OK§§.
to Rename ¢
J
Attach extra pages
•
•
Open attachments using §Options§ and
Attachments.
Open images and tones using §Options§
and Content.
§Options§ ¢New slide
Attach business card
GScroll to
§Options§ ¢Extras ¢
Business card ¢·.
Attach appointment
GScroll to
§Options§ ¢Extras ¢
Message lists/settings
Appointment ¢·.
All SMS and MMS messages are saved in
four different lists:
Send MMS
§Options§ ¢Send
Inbox
Sending a photo by MMS
§Menu§ ¢] ¢Inbox ¢MMS/SMS
You can easily send a photo as an MMS
immediately after taking it with the
"QuickPic" camera.
The list of SMS, MMS and CB messages
received is displayed. To receive an
MMS subsequently, open notification and
press §Receiving§.
§Menu§ ¢
¢Camera ¢§Options§
ꢁ
¢Send via MMS ¢§Select§ (select the de-
sired resolution) ¢§Skip§ (skip recording a
Draft
§Menu§ ¢] ¢Draft ¢MMS/SMS
The list of stored drafts is displayed.
left page (20) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
20
Ring tones
Unsent
Volume
Set different volumes for types of
call/functions.
Please make sure you have accepted the call
before holding the phone to your ear. This will
avoid damage to your hearing from loud ring
tones.
]
§Menu§ ¢
¢Unsent ¢MMS/SMS
The list of MMS messages not yet success-
fully sent or not yet completely sent con-
catenated SMS messages is displayed.
Sent
]
§Menu§ ¢
¢Sent ¢MMS/SMS
d Call tone, Group call tones, Other call
tone, Alarm tone, SMS/MMS tone
The list of sent SMS or MMS messages
is displayed.
You can set the tones to match your needs.
SMS profiles, MMS profiles
More tones...
Here you can set the ring tone separately
for the other functions.
]
§Menu§ ¢
¢Message setup ¢SMS
profiles/MMS profiles
Profiles have to be created for SMS and
MMS. The transmission characteristics are
defined in these. The data for these may
already have been entered. If not, you can
obtain this from your service provider. Ad-
ditional information is available in the
comprehensive operating instructions on
the Internet: www.siemens.com/ax72
Call screening
Only calls from numbers that are in the
Addressbook/Phonebook or in a prede-
fined group are signalled. Other calls are
only displayed. If you do not accept these
calls, they are diverted to your mailbox (if
is displayed in standby mode.
Key tones
Ring tones
Type of acoustic key tone: Click or Tone or
Silent
§Menu§ ¢ꢀ ¢Select function.
Minute beep
During a call, you will hear a beep after
each minute.
You can set the ring tone separately for
call types/functions. You can download
new ringtones from the internet via
Download new.
Information tones
Set service and alarm tones.
Ringer setting
Activate/deactivate the ring tone or
reduce it to a short beep.
CBS tone, Start melody, End melody
Silent alert
Activate/deactivate silent alert (also in ad-
dition to the ring tone). The silent alert is
activated if the highest volume is set for
the ring tone.
right page (21) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
21
Surf & fun
Profiles
Surf & fun
§Menu§ ¢É ¢Internet ¢Profiles
Activate profile
Internet browser
You can change the current profile each
time you access the Internet. For this, se-
lect profile, then §Select§. The current pro-
file is selected.
§Menu§ ¢É ¢Select function.
Get the latest information from the Inter-
net that is specifically adapted to the dis-
play options of your phone. In addition,
you can download games and applica-
tions to your phone. Internet access
may require registration with the service
provider.
Set profile
Up to 5 profiles can be configured (may
be barred by your provider). The entries
may vary depending on the service pro-
vider. Select profile, then §Edit§ and fill in
the data fields.
Homepage
b
To select the connection profile, see p. 25.
A connection is established with the Inter-
net provider’s portal (may be specified/con-
figured by default by your service provider).
Games & more
Download games and other applications.
You are advised about relevant applica-
tions on the Internet. Once you have se-
lected a game or application you can start
to download it immediately. Then you
can use the application. Most applica-
tions include instructions.
Bookmarks
List of URLs for fast access.
Internet
b
The browser is activated as soon as you
call up the function. (For settings see the
browser menu Setup, Start with...).
Select required function in the start menu
and confirm with §Select§.
Applications and games can be found at
wap.siemens.com or on the Internet at
End connection
Games and applications
Stored applications and links are found
under:
Press and hold Bto close the browser.
After GPRS/CSD lingertime (WAP param)
the connection will also be ended.
§Menu§ ¢É ¢Games & more
depending on which entry is highlighted:
Additional information
Browser menu.
Offline.
Online.
GPRS Online.
No network.
Different functions are available
Í
É
£ Download new
Ê
Ë
Ì
§Internet§ The selected Internet page is
loaded.
§ Use game/application offline
Select special characters, such as
@, ~, \ , see p. 12.
*
0
§Select§
Runnable application can be
started immediately.
Press repeatedly for:
. , ? ! ’ " 0 - ( ) @ / : _
left page (22) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
22
Setup
¦ Load game/application online
Setup
§Select§
Only description file; application
has still to be loaded.
Profiles
Additional information
§Menu§ ¢m ¢Profiles
You can use the browser to download applica-
tions (e.g. ringtones, games, pictures, anima-
tions) from the Internet.
Several settings can be stored in a phone
profile in order, for example, to adapt the
phone to the surrounding level of noise.
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications and for any direct damage or conse-
quential damage of whatever nature resulting
from the use of this application. For technical rea-
sons, such applications and subsequent enabling
of certain functions are lost in the event of the de-
vice being replaced/re-supplied and may be lost if
it is repaired. In such cases, the buyer is required
to download or enable the application again.
Please ensure that your phone has Digital Rights
Management (DRM) so that downloaded applica-
tions are protected from unauthorised reproduc-
tion. These applications are then exclusively
intended for your phone and cannot be trans-
ferred from this even to create a backup. Siemens
offers no warranty or guarantee nor does it accept
any liability for the customer's ability to download
or enable applications again or to do so free of
charge. We recommend that you carry out a
backup from time to time of the applications on
•
Five standard profiles are provided with
default settings. They can be changed
however: Normal envi., Quiet environ.,
Noisy environ., Carkit, Headset.
•
•
You can set two personal profiles
(<Name>).
The special profile Aircraft mode is
permanent and cannot be changed.
Switch on
Select default profile or personal profile
¢D.
Setup
Select profile or personal profile ¢D
¢Change setting
The list of available functions is displayed.
Carkit
If a Siemens original Car Kit is used, the
profile is activated automatically as soon
as the phone is inserted into the cradle
Headset
®
your Windows PC using the Siemens Mobile
If an original Siemens headset is used, the
profile is activated automatically as soon
as the headset is in operation.
Phone Manager Software. You can download the
latest version from the Internet:
Aircraft mode
Sound for all alarms (appointments,
alarm clock) are deactivated. Alarms are
only indicated on the display. This profile
cannot be modified. The phone will switch
off if you select the profile Aircraft mode.
Confirm a security prompt.
right page (23) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
23
Setup
Normal mode
Start up animation
Shown when phone is switched on.
When you switch on your phone again,
the previously set profile will be reactivat-
ed automatically.
Shut down animation
Shown when phone is switched off.
Display
Own greeting
§Menu§ ¢m ¢Display
Enter greeting to be displayed when
phone is switched on.
¢Select function.
Language
Big letters
Set the language of the display text.
When "automatic" is set, the language of
your service provider is used. Reset to this
language in standby mode:
You can choose between two font sizes
for the display.
Illumination
Set display illumination to brighter/darker.
The darker the setting the longer the
standby time.
* ꢀ 0 0 0 0 ꢀA
Text input
See also p. 12.
Contrast
Set colour display contrast.
T9 preferred
Activate/deactivate intelligent text entry.
Call setup
Input language
Select language for text entry. Languages
with T9 support are marked with the T9
symbol.
m
§Menu§ ¢
¢Call setup
¢Select function.
Hide ID
b
Background
Set background graphic for display.
When you make a call, your phone
number can be displayed on the recipi-
ent's display (depending on the service
providers).
Logo
Choose picture to be displayed instead of
the provider logo.
Call waiting
If you are registered for this service, you
can check whether it is set and you can
b
Colour scheme
Select colour scheme for the entire user
interface.
Screensaver
You can specify when calls should
be diverted to your mailbox or other
numbers.
The screensaver shows a picture in the
display when a period set by you has
elapsed. An incoming call and/or pressing
any key will end the function except if the
safety function is activated. With code
protection, the PIN must be entered.
left page (24) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
24
Setup
Set up call divert (example):
Clock
The most common condition for call
divert is, for example:
§Menu§ ¢m ¢Clock ¢Select function.
Time/date
•
All Unanswered
The clock must be set to the right time
once at start-up.
Includes the conditions Not reachable, No
reply, Busy, see below.
§Change§ ¢Enter the date first, then
D
All Unanswered ¢
¢Set
the time.
¢J(enter the phone number, to
Time zones
Set the time zone for your area.
which the call should be diverted) ¢§OK§.
After a short pause, the setting is
confirmed by the network.
Time format
Select 24h or 12h.
•
All calls
All calls are diverted. n is shown in the
Other possibilities for divert:
Date format
DD.MM.YYYY or MM/DD/YYYY
top line of the display in standby mode.
Buddhist year
Switch to the Buddhist year (not on all
phone models).
Not reachable, No reply, Busy
•
Status check
You can check the current divert status
for all conditions.
Show clock
Activate/deactivate time display in
stand-by mode.
After a short pause, the current situation
is transmitted by the network and
displayed.
Automatic switch off
p
o
s
Condition set.
Not set.
Display if status is unknown
(e.g. with a new SIM card).
The phone switches off each day at the
set time.
Activate:
§Time§ ¢JEnter time (24-hour-clock)
¢§OK§.
•
Clear all
Deactivate:
All set diverts are cleared.
§Manual§ ¢§OK§
Connectivity
Minute beep
During a call, you will hear a beep after
each minute as a reminder of the time
elapsed. The recipient does not hear this
beep.
§Menu§ ¢m ¢Connectivity
¢Select function.
GPRS
b
§Yes§ / §No§
Switch GPRS function on/off.
right page (25) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
25
Setup
GPRS info
Fax/data
Display of information on connection
status.
Rec fax/data
b
The call is signalled by a special ringtone
and the type of call (fax or data) is dis-
played. Now start the communication
program in your PC to receive the
fax/data.
Authentication
DActivate or deactivate encrypted
Internet dial-up (CSD connections only).
Data services
Send voice/fax
b
§Menu§ ¢m ¢Connectivity
To switch from voice mode to fax mode,
set the function on the phone before
transmission.
¢Select function.
For the MMS, WAP and HTTP applications
at least one connection profile must be
set up and activated.
Rec voice/fax
After starting the PC communication pro-
gram, activate the function during a call.
b
The default for the phone depends on
each service provider:
End transmission
End transmission with PC software and/or
•
•
•
The settings have already been imple-
mented by the provider. You can start
immediately.
Access profiles have already been cre-
ated by your provider. Then select and
activate profile.
press B.
Security
m
§Menu§ ¢
¢Security
¢Select function.
The access profiles must be configured
manually.
Auto key lock
The keypad is locked automatically if no
key has been pressed for one minute in
standby mode. This prevents the phone
from being used accidentally. However,
you can still be called and you can still
make an emergency call.
If necessary, check with your service
provider for details. If necessary enter
CSD settings and GPRS settings (your
service provider will supply you with
information on this if necessary or
in the FAQ section).
Direct call
(Phone-code protected)
Only one phone number can be dialled.
D
Select profile ¢
¢Change setting
¢§Options§ ¢§Edit§ ¢(Enter data)
Only ‚
(PIN2 protected)
Restrict calls to SIM-protected numbers in
the Phonebook.
b
¢§Save§.
HTTP profile
Select profile with G. Enter or modify
settings. If necessary, check with your
service provider for details.
left page (26) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
26
Setup
Last 10 only
File system
(Phone-code protected)
Restrict calls to the list of "dialled
Format
ted and all data that has been saved is de-
leted, including e.g. ringtones, images,
games etc.
numbers" (p. 16).
Codes
PIN control, Change PIN, Change PIN2,
Change phonecode, (p. 9).
Clean up
The file system is defragmented.
This SIM only
(Phone-code protected)
Your phone is prevented from being used
with a different SIM card.
b
Master reset
The phone is reset to the default values
(factory setting) (does not apply to SIM
card or network settings).
Alternative input in standby mode:
* ꢀ 9 9 9 9 ꢀ A
Barrings
b
Network barring restricts the use of your
SIM card.
All outgoing: Outgoing calls, except emer-
gency numbers, are barred.
Outgo internat: Only national calls can be
Network
m
§Menu§ ¢
¢Network
¢Select function.
made.
Line
b
Out.int.x home: International calls are not
permitted apart from calls to your home
country.
All incoming: The phone is barred for all
incoming calls.
To select/bar a telephone number, two in-
dependent telephone numbers have to be
registered.
Network info
The list of GSM networks currently availa-
ble is displayed.
When roaming: You will not receive calls
when outside your home network.
Auto network selection
If activated, the next network is dialled in
Status check: Status check for network
barring.
the order of your "preferred networks".
Clear all: Clear all barrings.
Choose network
Network search is restarted.
Phone identity
The phone identity number (IMEI)
is displayed. This information may be
useful for customer service.
Alternative input in standby mode:
* ꢀ 0 6 ꢀ
right page (27) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
27
Organizer
Preferred network
Set the service providers you prefer when
you leave your home network.
Organizer
§Menu§ ¢
¢Select function.
ç
Band selection
Select either GSM 900, GSM 1800 or
GSM 1900.
b
Alarm clock
The alarm will ring at the time set by you,
even when the phone is switched off. If
the phone has been switched off in Air-
craft mode the alarm is only shown on
the display and is not indicated by sound.
Fast search
NUsetewr ogrrkourepconnection is speeded up.b
Setting
Depending on service provider, you can
create groups with this service. These can
have access to internal (company) infor-
mation, for example, or special tariffs ap-
ply. Please check with your service provid-
er for details.
Set the time for the alarm call (hh:mm).
Confirm with §OK§.
Press §On/off§ to activate/deactivate the
alarm.
Calendar
You can enter appointments in the calen-
dar. Time and date must be set for the cal-
Page between days with H. Press G
briefly to page between weeks, press and
hold Gto page between months. Calen-
dar days in bold face indicate appoint-
ments on this day.
Accessories
m
§Menu§ ¢
¢Accessories
¢Select function.
Carkit
Auto answer
Calls are accepted automatically after a
few seconds.
Headset
Agenda
Accept call with Call key or ptt key
(Push To Talk), even when the keylock
is activated.
Press §Agenda§ to call up from the monthly
overview. Appointments for each individ-
ual day are shown in the agenda in chron-
ological order.
Auto answer
Calls are accepted automatically after a
few seconds.
ç
appointments (p. 28).
left page (28) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
28
Organizer
Enter new appointment
Alarm
PressD.
When the set date and time are reached
there is an audible and a visual alarm.
Alarm type Memo/Meeting: the text is
Type:
Press §Change§ repeatedly to select the
required type:
shown in the display.
Alarm type Call: The phone number is dis-
played and can be dialled immediately.
Alarm type Birthday and Anniversary: you
will be notified one day before the event
and on the birthday/ anniversary itself.
Memo
u
v
Text input for description.
Call
Enter phone number. Shown
with alarm.
Press §Pause§. The alarm stops for
5 minutes. Press §Off§ to stop the alarm.
Meeting
Text input for description.
Birthday or
Anniversary
w
{
Notes
§Menu§ ¢
È
ç
¢Notes
Enter name and date.
notes such as shopping lists easier. Save
confidential notes with the phone code
(p. 26). Please note that with the aid of
suitable programs it is possible for confi-
dential notes to be read from the phone
when connected to a PC.
Then make further entries field by field:
Description:
Description of the appointment.
Date:
Date of appointment.
Time:
Time of appointment.
Missed alarms
Alarm:
ç
§Menu§ ¢
¢Missed alarms
Activate alarm with §ON§ ¢J(enter
start time of the alarm before the appoint-
ment) ¢§Change§ (select Minutes, Hours,
Days).
Events with an alarm to which you have
not reacted are listed for reading.
Time zones
Reoccurrence:
ç
§Menu§ ¢
¢Time zones
Select a timeframe for repeating the
appointment: No, Daily, Weekly, Monthly,
Annual.
Set the time zone for your area.
Calendar setup
Enter a parameter for repeating: Forever,
Until, Occurrences (number).
If Weekly is selected, certain weekdays can
be highlighted.
ç
§Menu§ ¢
¢Calendar setup
Begin of week
You can set which weekday is listed first
on the left in the monthly and weekly
overviews.
right page (29) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
29
Extras
Currency converter
Extras
§Menu§ ¢ꢁ ¢Currency converter
Calculate the exchange rates. You can
SIM services (optional)
enter three currencies.
If no currency has yet been entered,
press §OK§ for the first input.
§Menu§ ¢ꢁ ¢SIM services
Your service provider may offer special
applications such as mobile banking,
share prices, etc. via the SIM card.
Otherwise:
§Options§ ¢New entry ¢Enter symbols for
the currencies ¢§OK§ ¢Enter exchange
rate ¢Save with §Options§ and §OK§.
If you have such a SIM card, the SIM serv-
ices will appear in the main menu under
"Extras" or directly above the left soft key
with symbol }.
Convert
Any combination of calculations can then
be carried out between the currencies
entered.
Where there are several applications,
these are displayed in a SIM services
menu.
Select a currency combination. Confirm
with §Select§ and enter amount (up to
12 digits). Press ꢀto display result.
With the SIM services menu, your phone
is ready to support future additions in
your service provider's user package. For
further information, please contact your
service provider.
Press §Repeat§ to start another conversion
using different data.
Calculator functions
§.§=§+§-§*§/§ Press right soft key repeatedly.
Calculator
§Menu§ ¢ꢁ ¢Calculator ¢Enter
number (up to 8 digits) ¢§.§=§+§-§*§/§ Select
calculator function.
Retrieve a saved number
from the calculator.
Ð
Repeat procedure with other numbers.
Stopwatch
Press ꢀto display result.
ꢁ
§Menu§ ¢
¢Stopwatch
Calculator functions
Two intermediate times can be recorded
and saved.
§.§=§+§-§*§/§ Press right soft key repeatedly.
±
Toggle between "+" and "-".
Convert to percentage.
Save /Retrieve number.
Exponent (max. two digits).
Press ꢀfor Start/stop. Press *for Interme-
diate time. Press §Start§ to start stopwatch.
Press §Reset§ to reset stopwatch.
%
Ï/, Ð
e
Special keys:
*
Set decimal point.
Add (press and hold).
0
left page (30) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
30
Extras
Countdown
Camera (Accessories)
§Menu§ ¢ꢁ ¢Countdown
You can use the phone to immediately
view, save and send photos by MMS that
you have taken with the "QuickPic" cam-
era. A flashlight is integrated into the
camera.
Pictures can be taken in two different
formats:
A set time elapses. The last 3 seconds are
indicated by a beep. At the end a special
beep sounds.
§Set§
Set period of time.
Start counter.
Interrupt counter.
§Start§
§Stop§
•
Low resolution:
§Change§ Change period of time.
§Reset§ Reset counter to starting time.
QQVGA 160x120 pixels, memory size
up to 6KB for sending as an MMS image
Voice command
•
High resolution: VGA 640x480 pixels,
memory size of one picture up to
40 KB – e. g. for further editing on PC.
To allow the picture to be viewed on
the phone display, a QQVGA picture is
created for every VGA picture.
§Menu§ ¢
¢Voice command
ꢁ
Functions can be started by a voice com-
mand. Up to 20 voice recordings can be
saved in the phone for voice dialling or
voice commands (not on SIM card!).
Press §Camera§ (in standby mode) or:
Record
§Menu§ ¢
§Menu§ ¢ꢁ ¢Camera
ꢁ
¢Voice command
First the number of shots still available is
shown (depends on resolution chosen).
A list with the functions available is dis-
played. GSelect function. Press §Record§.
Confirm selected function with §Yes§. Press
§Start§ to start recording.
Confirm with §OK§.
The last picture taken is shown. Scroll
through photos with G.
A short signal sounds. Now say the com-
mand corresponding to the function and
repeat it when prompted.
Picture
Press §Take§. You will hear an advisory tone
when the exposure time has expired.
Apply
Press and hold E(in standby mode).
A shot (especially in high resolution) re-
quires a few seconds to be processed.
The photo is shown on the display and
saved automatically.
A short signal (beep) sounds and a
prompt appears in the display.
Now say the function. Noisy environ-
ments may affect voice recognition.
right page (31) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
31
Fast access key
Flashlight
Fast access key
In the option menu the flashlight
function can be switched on/off.
The left soft key and the number keys
2 to 9 (speed dialling numbers) can each
be assigned an important phone number
or a function. The phone number can
then be dialled or the function started at
the touch of a button.
If the flash is switched on, a command is
given to charge the flashlight before
taking a picture. Press §Load 7§ briefly. The
flashlight is charged (battery capacity at
least approx. 30 %). Press §Take§.
The photo is taken with the flash. You will
hear an advisory tone when the exposure
time has expired. The photo is shown on
the display and saved automatically.
Left soft key
Assign a function/phone number to the
left soft key for fast access.
Change in standby mode (example)
§New SMS§Press briefly ¢§Change§
¢Gscroll to the applications (e.g.,
Internet, Phone number) ¢§Select§.
Sending a photo by MMS
You can easily send a photo as an MMS
immediately after taking it.
§Options§ ¢Send via MMS ¢§Select§ (select
the desired resolution) ¢§Skip§ (skip
recording a melody p. 19).
Apply in standby mode (example)
Key assigned with Phone number/name.
Press and hold §Carol§.
The MMS Editor starts. Simply complete
the following input fields:
Speed dialling keys
To:
· /JTelephone number/
Only possible for keys 2to 9. Key 1is
e-mail address of the recipient/s.
reserved for the mailbox.
Subject: Title of the MMS (maximum of
40 characters).
The MMS is now ready to send:
§Options§ ¢Send
Change in standby mode
JPress an unassigned numberkey
(2- 9) ¢§Set§ ¢Gscroll to the
applications (e.g. New SMS, Phone number,
Bookmarks) ¢§Select§.
Apply in standby mode
Press and hold assigned numberkey,
e.g. 3.
Menu speed dialling
All menu functions are numbered inter-
nally. A function may be selected directly
by entering these numbers in sequence.
Example:
Press §Menu§. Press e.g. 2for Records or 1
for Calls missed.
left page (32) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:28)
32
Own stuff
The following folders are also included in
Sounds or Pictures:
Own stuff
§Menu§ ¢Ñ
Download This enables you to download new
Files and folders are displayed. The fol-
lowing folders are provided for organising
your files: Pictures, Sounds, Colour
scheme, Data inbox.
new
files from the Internet.
Record
new
This enables you to record your
own ringtones (in Sounds folder
only).
You can scroll through these lists using
the navigation key:
EMS
Files that can be received per
SMS/MMS.
G
C
D
scroll up and down.
jump back from a folder.
Open folder or execute file using
related application.
Sending files
Press Ato send a highlighted picture,
sound, animation etc.
Index structure
The file system assigns special folders to
different data types.
Folders
Pictures
Contents
Format
*.bmp
*.bmx
*.bmz
*.gif
*.jpg
*.jpeg
*.png
Images, Animations,
Camera photos (p. 30)
Sounds
*.amr
*.mid
*.wav
Ring tones, melodies,
sounds
Colour
scheme
*.col
Colour schemes
Data inbox
*.vcf
*.vcs
Business cards,
appointments
right page (33) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
33
Customer Care
Customer Care
Chile..................................................8 00 53 06 62
China ...........................................0 21 23 01 71 88
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 90 01 00 77 00
Greece............................................80 11 11 11 16
Hong Kong.......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.................................................... 2 72 37 17
Kuwait................................................... 2 45 41 78
Latvia .................................................... 7 50 11 18
Lebanon.............................................. 01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg........................................ 43 84 33 99
Macedonia ........................................0 23 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta .......................................+ 35 32 14 94 06 32
Mauritius ............................................... 2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco .............................................. 22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway................................................ 22 70 84 00
Oman....................................................... 79 10 12
Pakistan ..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Philippines ........................................0 27 57 11 18
We offer fast, individual advice! You have
several options:
Our online support on the Internet:
We can be reached any time, any place. You are
given 24 hour support on all aspects of our prod-
ucts. Here you will find an interactive fault-finding
system, a compilation of the most frequently
asked questions and answers, plus user guides
and current software updates to download.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press *#06#), the soft-
ware version (to display, press *#06#, then
§Info§) and if available, your Siemens Service
customer number.
You can also get personal advice about our range
of products on our Premium Hotline:
United Kingdom ............................ 0906 9597500
(0.75 £ per minute)
Qualified Siemens employees are waiting to offer
you expert information about our products and
installation.
In some countries repair and replace services are
impossible where the products are not sold through
our authorised dealers.
If repair work is necessary, please contact one of
our service centres:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
left page (34) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
34
Care and maintenance
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ............................................62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 27 22 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ............................................04 36 94 24
•
•
Do not store your phone in hot environments
(e.g. vehicle instrument panel in the summer).
High temperatures can shorten the life of elec-
tronic devices, damage batteries and warp or
melt certain plastics.
Do not store your phone in cold environments.
When the phone warms up again (to its normal
ambient temperature), moisture can form inside
the phone, which may damage electronic circuit
boards.
Do not drop, knock or shake your phone. Rough
handling can damage internal circuit boards!
Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone!
•
•
The suggestions given above apply equally to your
phone, battery, charger and all accessories. If any
of these parts is not working properly, obtain fast
and reliable help at our service centres.
Battery quality statement
The capacity of your mobile phone battery will re-
duce each time it is charged/emptied. Storage at
too high or low temperatures will also result in a
graduly capacity loss. As a result the operating
time of your mobile phone may be considerably re-
duced, evan after a rull recharge of the battery.
Regardless of this, the battery has been designed
and manufactured so that it can be recharged and
used for six months after the purchase of your mo-
bile phone. After six months, if the battery is clearly
suffering from loss of performance, we recommend
that your replace it. Please buy only Siemens origi-
nal batteries.
Care and maintenance
Your phone has been designed and manufactured
to the highest of standards and should be treated
with great care. The suggestions below will help
you to enjoy your phone for many years.
•
Protect your phone from moisture and humidity.
Precipitation, humidity and liquids contain min-
erals that will corrode electronic circuits. Never-
theless, should your phone become wet,
disconnect it immediately from the power sup-
ply to avoid electric shock. Do not place your
phone (even to dry it) on/in a source of heat
such as a microwave oven, oven or radiator.
The phone may become overheated and
possibly explode.
Display quality declaration
For technological reasons, a few small dots with
different colours may appear in the display in ex-
ceptional cases.
Just remember that the appearance of brighter or
darker dots generally does not mean that a fault
has occurred.
•
Do not use or store the phone in dusty, dirty ar-
eas. Its moving parts may be damaged and the
casing may become deformed and discoloured.
right page (35) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
35
Product data
Phone ID
Product data
You will need the following details if you lose your
phone or SIM card:
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone
(under the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Declaration of conformity
BenQ Mobile hereby declares that the phone de-
scribed in this user guide is in compliance with the
essential requirements and other relevant provi-
sions of European Directive 1999/5/EC (R&TTE).
The relevant declaration of conformity (DoC) has
been signed. Please call the company hotline if you
require a copy of the original:
Lost phone
If you lose your phone or SIM card contact your
service provider immediately to prevent misuse.
Technical data
Operating time
GSM class:
Frequency range:
GSM class:
Frequency range:
GSM class:
Frequency range:
Weight:
4 (2 watt)
The operating time depends upon usage: Extreme
temperatures considerably reduce the phone’s
standby time. You should therefore avoid the leav-
ing the phone in the sun or on a radiator.
880-960 MHz
1 (1 watt)
Talk time: 90 to 300 minutes.
Standby time: 50 to 220 hours.
1,710-1,880 MHz
1 (1 watt)
Action taken
Time Reduces standby
(min) time by
1,850-1,990 MHz
76 g
Calling
1
1
1
30 - 90 minutes
60 minutes
Size:
105.6x46.8x17.5 mm
(75 ccm)
Light *
Network search
5 -10 minutes
Li-ion battery:
600 mAh
* Keypad input, dynamic light games, organiser,
etc.
Operating
temperature:
-10 °C… +55 °C
3.0 V or 1.8 V
SIM card:
left page (36) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
36
SAR
Additional Information can be found on the web-
sites of the World Health Organization
SAR
European Union (RTTE) and
or Siemens
international (ICNIRP)
INFORMATION ON RF EXPOSURE/ SPECIFIC
ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL GUIDE-
LINES FOR EXPOSURE TO RADIO WAVES
Your mobile device is a radio transmitter and re-
ceiver. It is designed not to exceed the limits for ex-
posure to radio waves recommended by
international guidelines. These guidelines were de-
veloped by the independent scientific organization
ICNIRP and include safety margins designed to as-
sure the protection of all persons, regardless of age
and health.
Guarantee certificate
(UK)
Without prejudice to any claim the user (customer)
may have in relation to the dealer or retailer, the
customer shall be granted a manufacturer's Guar-
antee under the conditions set out below:
•
In the case of new devices and their compo-
nents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at its
own option and free of charge, either replace
the device with another device reflecting the
current state of the art, or repair the said device.
In respect of parts subject to wear and tear (in-
cluding but not limited to, batteries, keypads,
casings, small parts on casings, protective cov-
erings where included in the scope of delivery),
this warranty shall be valid for six months from
the date of purchase.
This Guarantee shall be invalid if the device de-
fect is attributable to improper treatment and/or
failure to comply with information contained in
the user manuals.
This Guarantee shall not apply to or extend to
services performed by the authorised dealer or
the customer themselves (e.g. installation, con-
figuration, software downloads). User manuals
and any software supplied on a separate data
medium shall be excluded from the Guarantee.
The guidelines use a unit of measurement known
as the Specific Absorption Rate, or SAR. The SAR
limit for mobile devices is 2 W/kg and was adopted
into the European Standard EN 50360 and into oth-
er national standards. The CE mark demonstrates
that the EU requirements are met.
The highest SAR value for this device when tested
1
at the ear was 0.49 W/kg . As mobile devices offer
a range of functions, they can be used in positions
other than the head, such as on the body. In this
case, a separation distance of 1.0 cm is required.
•
•
As SAR is measured utilizing the device's highest
transmitting power, the actual SAR of this device
while operating is typically below that indicated
above. This is due to automatic changes to the
power level of the device to ensure it only uses the
minimum level required to reach the network.
The World Health Organization has stated that
present scientific information does not indicate the
need for any special precautions for the use of mo-
bile devices. They note that if you nevertheless
want to reduce your exposure then you can do so
by limiting the length of calls or using a 'hands-free'
device to keep the mobile phone away from the
head and body.
•
•
The purchase receipt, together with the date of
purchase, shall be required as evidence for in-
voking the Guarantee. Claims under the Guar-
antee must be submitted within two months of
the Guarantee default becoming evident.
Ownership of devices or components replaced
by and returned to Siemens shall vest in
Siemens.
1
The tests are carried out in accordance with in-
ternational guidelines for testing.
right page (37) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
37
Guarantee certificate (IRL)
•
•
This Guarantee shall apply to new devices pur-
chased in the European Union. For Products
sold in the United Kingdom the Guarantee is is-
sued by Siemens plc, Siemens House, Oldbury,
Bracknell, Berkshire, RG12 8FZ.
Any other claims resulting out of or in connec-
tion with the device shall be excluded from this
Guarantee. Nothing in this Guarantee shall at-
tempt to limit or exclude a Customers Statutory
Rights, nor the manufacturer's liability for death
or personal injury resulting from its negligence.
The duration of the Guarantee shall not be ex-
tended by services rendered under the terms of
the Guarantee.
Insofar as no Guarantee default exists,
Siemens reserves the right to charge the cus-
tomer for replacement or repair.
•
•
This Guarantee shall be invalid if the device de-
fect is attributable to improper care or use
and/or failure to comply with information con-
tained in the user manuals.
In particular claims under the Guarantee cannot
be made if:
•
•
•
The device is opened (this is classed as
third party intervention)
Repairs or other work done by persons not
authorised by Siemens.
Components on the printed circuit board are
manipulated
•
•
•
•
•
The software is manipulated
Defects or damage caused by dropping,
breaking, lightning or ingress of moisture.
This also applies if defects or damage was
caused by mechanical, chemical, radio in-
terference or thermal factors (e.g.: micro-
wave, sauna etc.)
The above provisions does not imply a change
in the burden of proof to the detriment of the
customer.
•
Devices fitted with accessories not author-
ised by Siemens
To invoke this Guarantee, please contact our on-
line support on the Internet
mobilephonescustomercare) or the Siemens tel-
ephone service. The relevant number is to be
found in the accompanying user guide.
•
•
This Guarantee shall not apply to or extend to
services performed by the authorised dealer or
the customer themselves (e.g. installation, con-
figuration, software downloads). User manuals
and any software supplied on a separate data
medium shall be excluded from the Guarantee.
The purchase receipt, together with the date of
purchase, shall be required as evidence for in-
voking the Guarantee. Claims under the Guar-
antee must be submitted within two months of
the Guarantee default becoming evident.
Guarantee certificate
(IRL)
Without prejudice to any claim the user (customer)
may have in relation to the dealer or retailer, the
customer shall be granted a manufacturer’s Guar-
antee under the conditions set out below:
•
•
Ownership of devices or components replaced by
and returned to Siemens shall vest in Siemens.
•
In the case of new devices and their compo-
nents exhibiting defects resulting from manu-
facturing and/or material faults within 24
months of purchase, Siemens shall, at its own
option and free of charge, either replace the de-
vice with another device reflecting the current
state of the art, or repair the said device. In re-
spect of parts subject to wear and tear (includ-
ing but not limited to, batteries, keypads,
casings, small parts on casings, protective cov-
erings where included in the scope of delivery),
this warranty shall be valid for six months from
the date of purchase.
This Guarantee shall apply to new devices pur-
chased in the European Union. For Products
sold in the Republic of Ireland the Guarantee is
issued by Siemens Ireland Limited, Ballymoss
Road, Sandyford Industrial Estate, Dublin 18 -
The Republic of Ireland.
Any other claims resulting out of or in connec-
tion with the device shall be excluded from this
Guarantee. Nothing in this Guarantee shall at-
tempt to limit or exclude a Customers Statutory
Rights, nor the manufacturer’s liability for death
or personal injury resulting from its negligence.
•
left page (38) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
38
License Agreement
•
The duration of the Guarantee shall not be ex-
tended by services rendered under the terms of
the Guarantee.
Insofar as no Guarantee default exists,
Siemens reserves the right to charge the cus-
tomer for replacement or repair.
The above provisions does not imply a change
in the burden of proof to the detriment of the
customer.
1. LICENSED SOFTWARE. As used in this
Agreement, the term "Licensed Software" means
collectively: all the software in Your phone, all of
the contents of the disk(s), CD-ROM(s), electronic
mail and its file attachments, or other media with
which this Agreement is provided and includes any
related Siemens or third party software and up-
grades, modified versions, updates, additions and
copies of the Licensed Software, if any, distributed
over the air, downloaded from Siemens Web pages
or servers or from other sources.
2. COPYRIGHT. The Licensed Software and all
related rights, without limitation including proprie-
tary rights therein, are owned by Siemens, its Li-
censors or affiliates and are protected by
international treaty provisions and all applicable
national laws. This Agreement does not convey to
You nor allow You to acquire any title or ownership
interest in the Licensed Software or rights therein.
The structure, organization, data and code of the
Licensed Software are the valuable trade secrets
and confidential information of Siemens, its Licen-
sors or affiliates. You must reproduce and include
the copyright notices with any permitted copies
You make of the Licensed Software.
3. LICENSE AND USE. Siemens grants to You
a non-exclusive, non-transferable end user right to
install the Licensed Software or use the Licensed
Software installed on the phone. The Licensed
Software is licensed with the phone as a single in-
tegrated product and may be used with the phone
only as set forth in these licensing terms.
4. LIMITATIONS ON LICENSE. You may not
copy, distribute, or make derivative works of the Li-
censed Software except as follows:
(a) You may make one copy of the Licensed
Software, excluding the documentation, as an ar-
chival backup copy of the original. Any other copies
You make of the Licensed Software are in violation
of this Agreement.
(b) You may not use, modify, or transfer the right
to use the Licensed Software other than together
with the accompanying hardware or copy the Li-
censed Software except as expressly provided in
this Agreement.
•
•
To invoke this Guarantee, please contact our on-
line support on the Internet
mobilephonescustomercare) or the Siemens tel-
ephone service. The relevant number is to be
found in the accompanying user guide.
License Agreement
This License Agreement ("Agreement") is between
You and Siemens Aktiengesellschaft, Germany
(“Siemens”). The Agreement authorizes You to use
the Licensed Software, specified in Clause 1 be-
low, which may be included in your phone, stored
on a CD-ROM, sent to You by electronic mail or
over the air, downloaded from Siemens Web pages
or servers or from other sources under the terms
and conditions set forth below.
Read this Agreement carefully before using your
phone. By using your phone or installing, copying,
and/or using the Licensed Software, You acknowl-
edge that You have read and understood the
Agreement and agree to be bound by all of the
terms and conditions stated below. You further
agree that if Siemens or any licensor of Siemens
("Licensor") is required to engage in any proceed-
ing, legal or otherwise, to enforce their rights under
this Agreement, Siemens and/or its Licensor shall
be entitled to recover from You, in addition to any
other sums due, reasonable attorney's fees, costs
and disbursements. If You do not agree to all of the
terms and conditions of this Agreement, do not in-
stall or use the Licensed Software. This Agreement
governs any Updates, releases, revisions, or en-
hancements to the Licensed Software.
(c) You may not sublicense, rent or lease the Li-
censed Software.
right page (39) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
39
License Agreement
(d) You may not reverse engineer, decompile,
modify, or disassemble those Licensed Software
programs except and only to the extent that such
activity is ex-pressly permitted by applicable law
notwithstanding this limitation.
Parts of the Licensed Software may be supplied by
third parties and may be subject to separate li-
cense terms. Such terms are set out within the
documentation.
5. MISUSE OF THE LICENSED SOFTWARE
OR DATA GENERATED BY THE LICENSED
SOFTWARE IS STRICTLY PROHIBITED BY SIE-
MENS, MAY VIOLATE GERMAN, U.S. AND OTH-
ER LAWS AND MAY SUBJECT YOU TO
SUBSTANTIAL LIABILITY. You are solely respon-
sible for any misuse of the Licensed Software un-
der this Agreement and for any liability or damage
related in any way to your use of the Licensed Soft-
ware in violation of this Agreement. You are also
responsible for using the Licensed Software in ac-
cordance with the limitations of this Agreement.
6. TERMINATION. This Agreement is effective
from the first date You install, copy or otherwise
use the Licensed Software. You may terminate this
license at any time by deleting or destroying the Li-
censed Software, all back up copies and all related
materials provided to You by Siemens. Your li-
cense rights terminate automati-cally and immedi-
ately without notice if You fail to comply with any
provision of this Agreement. The rights and obliga-
tions under sections 2, 5, 6, 7, 9, 12 and 13 of this
Agreement shall survive the termination of this
Agreement.
7. YOU ACKNOWLEDGE THE LICENSED
SOFTWARE IS PROVIDED "AS IS" AND NEI-
THER SIEMENS NOR ANY OF ITS LICENSORS
MAKE ANY REPRESENTATIONS OR WARRAN-
TIES, EXPRESS OR IMPLIED, INCLUDING BUT
NOT LIMITED TO THE WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICU-
LAR PURPOSE OR THAT THE LICENSED
SOFTWARE WILL NOT INFRINGE ANY THIRD
PARTY PATENTS, COPYRIGHTS, TRADE-
MARKS OR OTHER RIGHTS. THERE IS NO
WARRANTY BY SIEMENS OR ITS LICENSORS
OR BY ANY OTHER PARTY THAT THE FUNC-
TIONS CONTAINED IN THE LICENSED SOFT-
WARE WILL MEET YOUR REQUIREMENTS OR
THAT THE OPERATION OF THE LICENSED
SOFTWARE WILL BE UNINTERRUPTED OR ER-
ROR-FREE AND SIEMENS AND ITS LICEN-
SORS HEREBY DISCLAIM ANY AND ALL
LIABILITY ON ACCOUNT THEREOF. NO ORAL
OR WRITTEN INFORMATION OR ADVICE GIV-
EN BY A SIEMENS REPRESENTATIVE SHALL
CREATE A WARRANTY OR IN ANY WAY AF-
FECT THIS DISCLAIMER. YOU ASSUME ALL
RESPONSIBILITY TO ACHIEVE YOUR INTEND-
ED RESULTS AND FOR THE INSTALLATION,
USE, AND RESULTS OBTAINED FROM IT.
8. NO OTHER OBLIGATIONS. This Agreement
creates no obligations on the part of Siemens other
than as specifically set forth herein.
9. LIMITATION OF LIABILITY. IN NO EVENT
SHALL SIEMENS, ITS EMPLOYEES, LICEN-
SORS, AFFILIATES OR AGENTS BE LIABLE
FOR ANY DIRECT DAMAGES, LOST PROFITS,
DATA OR BUSINESS, OR COSTS OF PRO-
CUREMENT OF SUBSTITUTE GOODS OR
SERVICES, PROPERTY DAMAGE, INTERRUP-
TION OF BUSINESS OR FOR ANY SPECIAL, IN-
DIRECT, INCIDENTAL, EXEMPLARY,
ECONOMIC, PUNITIVE OR CONSEQUENTIAL
DAMAGES, HOWEVER CAUSED, AND WHETH-
ER ARISING UNDER CONTRACT, TORT, NEG-
LIGENCE, OR OTHER THEORY OF LIABILITY,
OR ARISING OUT OF THE USE OF OR INABILI-
TY TO USE THE LICENSED SOFTWARE, EVEN
IF SIEMENS IS ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. THE LIMITATION OF LIA-
BILITY SHALL NOT APPLY IF AND TO THE EX-
TENT SIEMENS´ LIABILITY IS MANDATORY
UNDER THE APPLICABLE LAW E.G. ACCORD-
ING TO PRODUCT LIABILITY LAW OR IN THE
EVENT OF INTENTIONAL MISCONDUCT, PER-
SONAL INJURY OR DEATH.
10. TECHNICAL SUPPORT. Siemens has and
its Licensors have no obligation to furnish You with
technical support unless separately agreed in writ-
ing between You and Siemens or the applicable
Licensor.
Siemens and where applicable its Licensors in the
Licensed Software shall be free to use any feed-
back received from You resulting from your access
to and use of the Licensed Software for any pur-
pose including (without limitation) the manufacture,
left page (40) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
40
License Agreement
marketing and maintenance or support of products
and services.
party will not be deemed a waiver of any right relat-
ed to a subsequent breach of such provision or any
other right hereunder. Notwithstanding anything to
the contrary in this Agreement, Siemens and/or its
licensors may enforce its rights, including but not
limited to copyright, trademark or trade names, in
accordance with the rules of law in each country.
11. EXPORT CONTROL. The Licensed Software
may include technical data and cryptographic soft-
ware and is subject to German, European Union
and U.S. export controls and may be subject to im-
port or export controls in other countries. You
agree to strictly comply with all applicable import
and export laws and regulations. Specifically, You
agree, to the extent required by U.S. Export Admin-
istration Regulations, that You shall not disclose or
otherwise export or re-export the Licensed Soft-
ware or any part thereof delivered under this
Agreement to (a) Cuba, Iran, Iraq, Libya, North Ko-
rea, Sudan, Syria or any other country (including a
national or resident of such country) to which the
U.S. has restricted or prohibited the export of
goods or services.
12. APPLICABLE LAW AND FORUM. The laws
of Germany govern this Agreement. No choice of
law rules of any jurisdiction will apply. The courts in
Munich shall settle any disputes arising out of or re-
lating to this Agreement provided you are a
merchant.
13. MISCELLANEOUS. This Agreement repre-
sents the entire agreement between You and Sie-
mens relating to the Licensed Software and (i)
supersedes all prior or contemporaneous oral or
written communications, proposals, and represen-
tations with respect to its subject matter; and (ii)
prevails over any conflicting or additional terms of
any acknowledgement or similar communication
between the parties during the term of this License.
Notwithstanding the foregoing, some products of
Sie-mens may require You to agree to additional
terms through an on-line "click-wrap" license, and
such terms shall supplement this Agreement. If any
provision of this Agreement is held invalid, all other
provisions shall remain valid unless such validity
would frustrate the purpose of this Agreement, and
this Agreement shall be en-forced to the full extent
allowable under applicable law. No modification to
this Agreement is binding, unless in writing and
signed by a duly authorized representative of each
party. This Agreement shall be binding on and shall
inure to the benefit of the heirs, successors, and
assigns of the parties hereto. The failure of either
party to enforce any right resulting from the breach
of any provision of this Agreement by the other
right page (41) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:36)
41
Accessories
Accessories
Available Accessories are:
Fashion & Carry
Tour Case FCT-650
Belt Case FCL-600
Energy
Li-Ion Battery 600 mAh EBA-670
Travel Charger EU ETC-500
Travel Charger UK ETC-510
Car Charger Plus ECC-600
Car Charger ECC-500
Desk Top Stand EDS-600
Handsfree portable
Headset Basic HHS-500
Headset HHS-510
Headset Purestyle HHS-610
Office
Data Cable DCA-500
Data Cable USB DCA-510
Multitainment
Quick Pic Camera IQP-500
Car Solutions
Car Kit Portable HKP-500
Car Kit Easy HKP-700
Car Kit Easy Upgrade HK0-700
Products can be obtained in specialist
shops or you can visit the Siemens Mobile
Store online:
Siemens Original Accessories
right page (43) of AX72 Pegasus-DTC, FUG, en A31008-H2860-A1-1-7619 (06.10.2005, 08:23)
43
Index
MMS
E
F
N
Network
G
O
H
P
Phonebook
PIN
I
Profiles
L
M
Menu
Message
R
left page (44) of AX72 Pegasus-DTC, FUG, en, A31008-H2860-A1-1-7619 (06.10.2005, 08:23)
44
S
Index
T
T9
Settings
SIM card
U
V
Volume
SMS
Switch off phone
|