Siemens M65 User Manual

mobile

Issued by

Information and Communication mobile

Haidenauplatz 1

D-81667 Munich

Rights of modification reserved.

Siemens Aktiengesellschaft

www.siemens-mobile.com

M65

Table of Contents

Safety precautions ..................... 3

Overview of the phone .............. 5

Display symbols ......................... 7

Getting started ........................... 9

Charge battery ....................... 11

Switching phone on and off/

entering PIN ............................. 12

Entering the PIN ..................... 12

Emergency number (SOS) ...... 12

General instructions ................ 13

Standby mode ....................... 13

Signal strength ...................... 13

Digital Rights Mgmt. (DRM) .... 13

Main menu ............................ 13

Standard functions .................. 15

Highlighting mode ................. 16

Menu speed dialling ............... 16

Security .................................... 17

Codes .................................... 17

Preventing accidental

activation ............................... 18

Text entry ................................. 19

My phone ................................. 23

Calling ...................................... 24

Default book ............................ 30

Addressbook ............................ 31

New entry .............................. 31

Change entry ......................... 33

Call entry ............................... 33

Groups ................................... 34

Phonebook ...............................35

Ne w entry ..............................3 5

Call (search for an entry) ........3 6

Change entry .........................3 6

<Special books> .....................3 7

Call records ...............................38

Time/charge ..............................39

Camera .....................................4 0

Photo mode ...........................4 0

Video mode ............................41

Inbox ........................................4 2

SMS ...........................................4 3

Write/send ..............................4 3

Read .......................................45

Setting ...................................47

MMS .........................................4 9

Create ...................................4 9

Templates ..............................5 1

Send ......................................5 2

Receive ..................................5 3

Read .......................................54

Setting ...................................5 5

E-mail ........................................5 7

Write ......................................5 7

Receive/read ...........................58

Se tting ...................................5 9

Voice message/mailbox ............60

Start menu .............................6 1

Contact lists ...........................62

Start chat ...............................64

See also Index at the end of this User Guide

Table of Contents

Msg. history ........................... 65

Setting ................................... 65

Extras ......................................1 03

SIM services (optional) .........1 03

Alarm clock ..........................103

Sound recorder .....................104

Calc. .....................................1 05

Unit converter ......................1 05

Stopwatch ............................1 06

Countdown ..........................1 07

Remote synchronisation .......1 07

Media player ...........................1 09

My stuff ..................................1 10

Mobile Phone Manager ..........1 12

Questions & Answers .............1 14

Customer Care ........................1 17

Care and maintenance ...........1 19

Product data ...........................1 20

Accessories .............................1 21

Quality ....................................1 23

Guarantee certificate (UK) .....1 24

Guarantee certificate (IRL) .....1 26

SAR – European Union (RTTE) ...128

SAR – International (ICNIRP) ...130

Menu tree ...............................131

Index .......................................137

CB services ............................... 67

Surf & fun ................................. 68

Internet ................................ 68

Bookmarks ............................. 70

Games and Applications ......... 71

Downl. assis. .......................... 71

Setup ........................................ 73

Profiles .................................. 73

Themes .................................. 75

Display ................................... 76

Dynamic light ........................ 78

Ringtones .............................. 79

Call setup ............................... 81

Phone setup ........................... 83

Clock ..................................... 85

Connectivity .......................... 86

Security ................................. 89

Network ................................ 91

Accessories ............................ 93

My menu .................................. 94

Fast access ............................... 95

Organiser ................................. 97

Calendar ................................ 97

Appointments ........................ 98

Tasks ..................................... 99

Notes ................................... 100

Missed appts. ....................... 100

Dictating mac ...................... 101

Time zones .......................... 102

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with legal

requirements and local restric-

tions when using the phone. For

example in aeroplanes, petrol

stations, hospitals or while driv-

ing.

The ringtone (S. 79), info tones

(S. 83) and handsfree talking

are reproduced through the

loudspeaker. Do not hold the

phone to your ear when it rings

or when you have switched on

the handsfree function (S. 26).

Otherwise you risk serious per-

manent damage to your hear-

ing.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids or

pacemakers. Keep at least

20 cm/9 inches between phone

and pacemaker. When using

the mobile phone hold it to the

ear which is further away from

the pacemaker. For more infor-

mation consult your doctor.

Do not use an optical magnifier

to look at the activated infrared

interface [Class 1 LED product

(classification as per

IEC 60825-1)].

Only use original Siemens bat-

teries (100 % mercury-free) and

– charging devices. Otherwise

you risk serious damage to

health and property. The battery

could explode, for instance.

Small parts such as the SIM

card, sealing stop, lens ring and

lens cap can be dismantled and

swallowed by small children.

The phone must therefore be

stored out of the reach of small

children.

You may only open the phone to

replace the battery (100 % mer-

cury-free) or SIM card. You

must not open the battery under

any circumstances. All other

changes to this device are

strictly prohibited and will invali-

date the guarantee.

The mains voltage specified on

the power supply unit (V) must

not be exceeded. Otherwise the

charging device may be

destroyed.

Safety precautions

Important

Please dispose of unwanted

batteries and phones as permit-

ted by the laws in your country.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Use only Siemens original

accessories. This will avoid

potential risks to health or prop-

erty and ensure compliance with

all relevant regulations.

Improper use will invalidate the guarantee!

Overview of the phone

B On/Off/End key

In lists, messages and menus:

• Switched off: press and hold to

switch on.

• During a conversation or in an appli-

cation: press briefly to finish.

• In menus: press briefly to go back a

level.

Hold down to return to standby mode.

• In standby mode: hold down to switch

off phone.

Scroll up and down.

Back one level.

During a call:

Set volume.

Call options.

Call key

Dial displayed/highlighted phone num-

bers/names, take calls. Show last

phone numbers dialled in standby

mode.

£ X

Display in standby mode

Soft keys

Service provider

The current functions of this key are

shown in the bottom line of the display

as §Text§/symbol (e.g.

01.05.2004 10:10

NewMMS Menu

Joystick

Press the joystick vertically

downwards to start an applica-

tion or function.

In standby mode:

Open main menu.

Open user profiles.

Open Phonebook/Address-

book.

Open Inbox.

Start the camera.

Overview of the phone

1 Loudspeaker

LED for dynamic light (p. 78)

3 Infrared interface (IrDA)

4 * Ringtone

• Hold down in standby mode:

Switch all audible signals on/off

(except alarm).

£ X

• Hold down on incoming call:

Switch off ringtone for this call only.

Service provider

Key lock

Hold down in standby mode:

Switch key lock on/off.

01.05.2004 10:10

NewMMS Menu

6 Connection socket

For charger, headset, flash etc.

7 Integrated antenna

Do not obstruct the phone above the

battery cover unnecessarily. This

reduces the signal quality.

8 Connection for external antenna

Camera lens

Display symbols

Display symbols (selection)

Keypad locked

Signal strength

Auto answer feature on

Text input with T9

Activated and available

^T9Abc

Charging

Battery charge level,

e.g. 50 %

Registered

Phonebook

Temporarily interrupted

Browser Offline

Call records

Surf & fun/

Service provider portal

Browser online

Organiser

Browser via GPRS online

Browser no network

IrDA activated

Messages

Camera

Extras

IrDA transmission

My stuff

Events (selection)

Setup

SMS memory full

All calls are diverted

MMS memory full

Phone memory full

No network access

Missed call

Signal tone off

Short ring (beep) only

Ringtone only if the caller is

stored in the Phonebook

Alarm set

Delete assistant

Display symbols

Message symbols (selection)

Camera symbols

Switch between photo and

video

Unread

Read

Brightness

Draft

Zoom factor

Sent

White balance

Flash connected

Unsent

Forwarded

With DRM contents (p. 13)

{

With attachment

MMS received

MMS read

Voice mail received

Getting started

Battery cover

• Pull the rubber gasket over the

^{locating lugs}1on the cover, then

^{push it onto the four studs}2 so

that it is firmly positioned on the

cover.

Getting started

The phone must be assembled

before you can get started.

SIM card and battery

• Place the SIM card in front of the

slot with the contact surface fac-

ing downwards. Then slide the SIM

^{into the holder}1).

^{• Push cover forwards}3until the

locating lugs engage in the open-

ings in the phone.

• Insert the battery sideways into

the phone , then press it down-

wards

until it clicks into place.

Additional information

Your phone's display is supplied with a

protective film. Remove this film slowly

before assembling the phone. In rare

cases, static discharge may cause dis-

colouration at the edges of the display.

However this will disappear within approx.

10 minutes.

Getting started

Metal bracket

Seals

• Slide the metal bracket open until

the openings in the metal bracket

and in the cover are directly above

^{each other}1. The hooks 2must

engage in the openings on the

front of the phone.

• Insert the contacts cover 1 into

the connection socket.

• The camera lens and antenna

socket are protected by the lens

^cap2. Using the rubber washer

3in its place does not offer better

protection (p. 119).

• Insert the locking catch into the

^{metal bracket}3and turn it ninety

^{degrees to the right}4to join the

metal bracket to the phone.

Additional information

Please switch off your phone before remov-

ing the battery!

Only 3 V SIM cards are supported. Please

contact your service provider if you have an

older SIM card.

Getting started

Charge icon not visible

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case the battery

is fully charged after 3 to 4 hours.

Charge battery

Charging procedure

The battery is not fully charged when

delivered. Plug the charger cable into

the bottom of the phone, plug the

power supply unit into a mains power

socket and charge for at least two hours.

Only use the plug-in power supply unit

included in delivery!

Display while in service

Charge level display during opera-

tion (empty – full):

V W X

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/dis-

charging cycle. You should therefore

not remove the battery unnecessarily

and where possible not finish the

charging process prematurely.

Display during charging.

Charging time

An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning. The

mains voltage specified on the power

supply unit must not be exceeded.

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Operating times

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Talktime: 100 to 330 minutes

Standby time: 60 to 300 hours

Switching phone on and off/entering PIN

Switching phone on/off

Switching your phone on

for the first time

Hold down the On/Off/End

key.

Time/date

Set the clock correctly on a one-off

basis when getting started.

Entering the PIN

The SIM card can be protected with a

4 to 8-digit PIN.

Press this key, then select

§Change§.

Enter the PIN using the

First enter the date (day/

number keys. The charac-

month/year), then the

ters

appear to

****

time (24 hours, including

seconds).

ensure nobody can read

your PIN on the display.

Correct with ] .

Press. The time and date

are updated.

Confirm by pressing the

joystick. Logging on to

the network will take a

few seconds.

Time zones

Set the time zone for your area.

Select the city in the

Additional information

Change PIN.......................................p. 17

Clear SIM card barring ......................p. 18

desired time zone from

the list ...

§Set§

... and set it.

Copy SIM addresses

Emergency number

(SOS)

The first time the SIM card is insert-

ed, the entries on it can be copied to

the Addressbook. Please do not inter-

rupt this procedure. During this time,

do not accept incoming calls. Follow

the instructions in the display.

Only to be used in real emergencies!

By pressing the §SOS§ soft key you can

make an emergency call on any net-

work without a SIM card and without

entering a PIN (not available in all

countries).

You can also copy data from the SIM

card at a later time (p. 36).

General instructions

Standby mode

Main menu

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the dis-

play.

The main menu is displayed graphi-

cally with symbols:

Call up from standby

mode.

Hold down the On/Off/End

Select the application

key to return to standby

symbols.

mode from any situation.

Start an application.

Signal strength

Main menu options

Strong signal.

§Options§

[

Open menu.

A weak signal reduces the

Different functions are available

depending on the context:

call quality and may lead

to loss of the connection.

Change your location.

Big letters

Illumination

Help

Select between two font

sizes.

Set display illumination to

brighter/darker.

Digital Rights Mgmt.

(DRM)

Display a help text.

Remember that your telephone has

Digital Rights Management. The use

of downloaded pictures, sounds or

applications can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only,

number of times it can be used etc.

(see also p. 72).

General instructions

Symbols

The following symbols are used to

explain operation:

User guide

Menu controls

The steps needed to reach a function

are shown in a condensed form in the

user guide, e.g. to display record of

missed calls in condensed form:

Enter numbers or letters.

On/Off/End key

C ¢ ¢Calls missed

This comprises the following steps:

Call key

Open main menu.

Soft keys

Select (highlight)

moving the joystick

Displays a soft-key func-

tion.

The joystick can be moved

in 5 directions.

upwards, then press verti-

cally down on the joystick

before using the joystick

to highlight Calls missed.

§Menu§

Confirm. The list is

opened.

Press the joystick vertically,

e.g., to call up the menu.

D F E

Press the joystick in the

directions shown.

Function dependent on

service provider. May

require special registration.

Standard functions

Option menus

Text input T9 preferred: Activate/

(p. 19)

deactivate T9 input.

Functions which appear repeatedly

in the options menu are listed here.

Input language: Select

language for text.

§Options§ Open menu.

Rename

Capacity

Attributes

Rename selected entry.

Display memory capacity.

Edit

Open the entry to edit.

Display entry.

View

Display properties of the

highlighted object.

Delete/

Delete all

Delete entry/delete all

entries after confirmation.

Help

Display help text.

New entry

Send...

Create new entry.

Selecttransmissionservice

and medium for sending or

printing.

Reply/Reply

to all

The sender becomes the

recipient, "Re:" is placed in

front of the subject matter

and the received text is

transferred into the new

message.

Save

Store entry.

Save to 9

Save recipients in the cur-

rent address directory.

Sort

Set sort criteria

(alphabetical order, type,

time).

Standard functions

Highlighting mode

With some applications (e.g. Phone-

book/Addressbook) one or more

entries in a list can be highlighted to

carry out a function jointly.

Menu speed dialling

All menu functions are numbered

internally. A function may be

selected directly by entering these

numbers in sequence.

§Options§

E.g., write new SMS (from standby

mode):

Open menu.

Activate highlighting

mode.

Mark

Press to display the main

menu. Then press

If a non-highlighted entry is selected,

this can be highlighted:

for Messages, then

§Mark§

The current entry is high-

lighted.

for Write message, then

If a highlighted entry is selected, the

highlighting can be deleted:

for SMS.

§Unmark§ Unhighlight the current

entry.

Additional highlighting functions:

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Delete

marked

All selected entries are

deleted.

Security

The phone and SIM card are pro-

tected against misuse by several

security codes.

C ¢_¢T_Sele¢_ctS_fe_uc_nu_cri_tt_iy_o¢_n.Codes

PIN control

Keep these security codes in a safe

place where you can access them again

if required.

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone.

Some service providers do not per-

mit deactivating the control.

Codes

Protects your SIM card

(Personal Identification

Number).

§Select§

Press.

Enter PIN.

Confirm input.

PIN2

This is needed to set the charge

detail display and to access

additional functions on special

SIM cards.

§Change§ Press.

PUK

PUK2

Change PIN

Confirm.

Key code. Used to unlock SIM

cards after the wrong PIN has

been entered repeatedly.

Phone

code

You can change the PIN to any 4 to

8-digit number you find easier to

remember.

Protects your phone. Must be

entered at the first security set-

ting.

Enter current PIN.

Press.

_,C

Enter new PIN.

Repeat new PIN.

Security

C _¢¢T_Sele¢_ctS_fe_uc_nu_cri_tt_iy_o¢_nCodes

Change PIN2

(Display only if PIN2 is available).

Proceed as for Change PIN.

Preventing accidental

activation

Even if PIN control is deactivated

(p. 17) confirmation is required to

switch on the phone.

This prevents accidental activation

of the phone, e.g. when you are car-

rying it in a bag or when you are trav-

elling in an aircraft.

Chg.phonecode

(Change phonecode)

You define the phone code (4 to

8 digits) when you call up a phone-

code protected function for the first

time (e.g. Direct call, p. 28). It is then

valid for all phone-code protected

functions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. If this occurs, contact the

Siemens Service (p. 117).

Hold down.

Press. The phone switches

on.

§Cancel§

Press this key or take no

action. The phone does

not switch on.

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the SIM

card in accordance with the instruc-

tions. If the PUK (MASTER PIN) has

been lost, please contact your serv-

ice provider.

Text entry

Press briefly: Special char-

Text entry without T9

acters are shown.

Press number key repeatedly until

the required letter appears. After a

brief interval the cursor will advance.

Example:

Hold down: Open input

menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Hold down: Writes 0.

Press once briefly to write

the letter a, twice to type

b etc.

Writes blank. Press twice

= jumps a line.

Hold down to write the

number.

Ä, ä, 1–9 'Umlauts' and numbers

are displayed after the rel-

evant letters.

Special characters

Press briefly. The symbols

chart is displayed

Press briefly to delete the

]

letter before the cursor.

Hold down to erase the

whole word.

)

’

;

(

)

[

]

{

}

€

Move the cursor

(forwards/back).

∆

Ω

Press briefly: Swap

between abc, Abc, abc,

Abc, ABC, 123. Status

) Line break

shown in top line of dis-

play.

Navigate to characters.

Confirm.

Hold down: All input-

variants are displayed.

§Select§

Text entry

Writing with T9

Since the display changes as you

proceed,

Input menu

With text input:

Hold down. The input

it is best if you finish a word without

looking at the display.

Simply press the keys once only

where the relevant letter is located.

For "hotel", for example:

menu is displayed:

Text format (SMS only)

Input language

Mark

Copy/Insert

Press briefly for ^T9Abc then

4 6 8 3 5

Text entry with T9

"T9" deduces the correct word from

the individual key entries by making

comparisons with an extensive dic-

tionary.

A blank ends a word.

Do not use special characters such as

Ä; use standard characters instead

e.g. A. T9 will do the rest for you.

Activate, deactivate T9

§Options§ Open text menu.

Text input Select.

T9 Text Input is licensed under one or more of

the following:

U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945 928 and 6,011,554;

Canadian Pat. No. 1,331,057;

T9 preferred

Select.

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

§Change§ Activate T9.

Select input language

Select the language in which you

want to compose your message.

§Options§ Open text menu.

Text input Select.

Input language

Select.

§Select§

Confirm,thenewlanguage

is set. Languages with T9

support are marked with

the T9 symbol.

Text entry

T9 word suggestions

Correct a word

If several options are found in the

dictionary for a key sequence (a

word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

Move left or right, word

by word, until the

required word is

§highlighted§.

Scroll through the T9

word suggestions again.

The word must be shown

§highlighted§. Then press

Deletes the last character

in a word and displays a

new possible word.

]

The displayed word is

replaced with a different

word. If this word is also

incorrect, press again.

Additional information

Within a "T9 word", individual letters may

not be edited without first removing the T9

status. In most cases it is better to rewrite

the complete word.

Repeat until the correct

word is displayed.

If the word you want is not in the dic-

tionary, it can also be written with-

out T9.

Set a full stop. The word is

concluded if it is followed by a

space. Within a word, a full

stop represents an apostro-

phe or hyphen:

To add a word to the dictionary:

§Spell§

Select.

e.g. §provider.s§ = provider’s.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Moving the cursor to the right

ends the word.

Press briefly: Switch

between: abc, Abc, ^T9abc,

^T9Abc, 123. Status shown in

top line of display.

Hold down: All input modes

are displayed.

Press briefly: Select special

characters (p. 19).

Hold down: Opens input

menu (p. 20).

Text entry

Use text module

Text modules

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS, e-mail).

Write message

(SMS, MMS, e-mail).

§Options§ Open text menu.

Write text module

§Insert§

Select.

C ¢M ¢Text modules

§Options§ Select New text.

Select Text modules.

Select text module from

the list.

Write text.

§Select§

Confirm. The text module

is displayed.

§Options§ Open menu and select

Save. Accept the specified

name or allocate a new

one.

Confirm. The text module

is inserted in the message

to the right of the cursor.

Save.

My phone

The following shows how to adjust

your phone and give it a personal

touch.

Where do I get what?

You can purchase additional ring-

tones, logos, animations and Java

applications from your service pro-

vider or directly from Siemens.

Ringtones (p. 79)

Assign individual ringtones to caller

groups or special dates

Service provider portal

Pictures (p. 110)

Depending on your service provider,

you will find direct access to his por-

tal on your telephone via menu

items or bookmarks. Please contact

your service provider for more infor-

mation on these services.

Assign individual pictures or photos

to your Addressbook entries.

Animations (p. 77)

Choose a start-up and closing anima-

tion as well as a personal greeting.

Screensaver (p. 76)

Choose an analogue or digital clock,

or a personal picture.

Siemens City Portal

You will find additional ringtones,

logos, animations and screensavers

as well as more applications, games

and services in the Internet at this

address:

(Operator) Logo (p. 76)

Choose an individual picture (to be

displayed in standby mode)

www.siemens-mobile.com

Wallpaper (p. 76)

Or you can download them directly

via WAP:

Choose your own permanent back-

ground image.

wap.siemens-mobile.com

Topics (p. 75)

You will also find a service for saving

data here as well as a list of the coun-

tries in which these services are

available.

Load a completely new visual pres-

entation onto your phone.

Applications (p. 71)

Download your own applications

from the Internet.

My menu

Create your own menu (p. 94) with

frequently used functions, phone

numbers or WAP pages.

Calling

Dialling with number

keys

Set volume

Regulate the volume

(only possible during a

call).

The phone must be switched on

(standby mode).

If a Car Kit is used, its volume setting

will not affect the usual setting on

the phone.

Enter the number (always

with area/international

dialling code).

] A short press clears the

last digit, a long press

clears the entire phone

number.

Redial previous numbers

To redial the phone number last

called:

Press the Call key. The dis-

Press the Call key twice.

played phone number is

dialled.

To redial other numbers that were

dialled previously:

End call

Press the Call key once.

Press the End key briefly.

Pick out the phone

Press this key even if the

number from the list,

person on the other end

of the line has hung up

first.

then to dial press the …

... key.

Calling

Reminder

If the number is busy

§Prompt§ A beep reminds you to

redial the displayed

phone number after

15 minutes.

If the called number is busy or can-

not be reached because of network

problems several options are availa-

ble (depending on the service pro-

vider). An incoming call or any other

use of the phone interrupts these

functions.

Additional information

Store phone number in the

Addressbook/Phonebook.

Either

§Handsfr.§ Switch on Handsfree (play-

back from loudspeaker).

Auto. redial

Always switch off "handsfree

talking" before holding the

phone to your ear! Otherwise,

you will damage your hearing!

§Auto dial§ The phone number is

automatically dialled ten

times at increasing time

intervals. End with:

Press and hold to switch

microphone off.

B End key.

International dialling codes

Press and hold until a "+" is

displayed.

Call back

§Country§ Press and select country.

§Call back§ Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Calling

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Handsfree

You can put the phone aside during

a call. You can then hear the caller

via the loudspeaker.

§Handsfr.§ Activate handsfree talk-

Press.

ing.

Switch on.

Press.

Use the joystick to adjust

the volume.

A phone number transmitted by the

network plus the corresponding

name (possibly with a picture) are

displayed if they are stored in the

Phonebook/Addressbook (p. 32).

§Handsfr.§ Deactivate.

Warning!

Always switch off "handsfree talking"

before holding the phone to your ear! Oth-

erwise, you will damage your hearing!

Reject call

§Reject§

Press.

Swapping between

two calls

Press briefly.

Establish a second connection

Warning!

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

You can call another number during

a call.

§Options§ Open call menu.

Hold

The current call is put on

hold.

Additional information

Press and hold to switch off

the ringtone and silent alert.

Now dial the new phone

number or select

Missed call display.

§Options§, the Phonebook,

Addressbook, or phone

number.

When the new connection is estab-

lished:

§Swap§

Swap between calls.

Calling

Incoming calls during a call

Conference

You may need to register for this

service with your service provider

and set your phone accordingly

(p. 81). During a call, you may be

advised that there is another call

waiting. You will hear a special tone

during the call. You have the follow-

ing options:

Call up to 5 parties one by one and

link them together in a multiparty

call. Some of the functions described

may not be supported by your serv-

ice provider or may have to be ena-

bled specially.

A connection has already been

established:

• Accept the waiting call in addition to

the first

§Options§ Open menu and select

Hold. The current connec-

tion is maintained.

§Swap§

Accept the waiting call,

putting the current call on

hold to do so.

Now dial a new number.

When the new connec-

Always proceed as above to swap

between the two calls.

tion is established ...

§Options§ ... open menu and select

Conference. The held call is

joined.

• Reject the waiting call

§Reject§

Press.

Repeat procedure until all partici-

pants are linked together (up to

5 participants).

§Divert§

The waiting call is

diverted, for example, to

the mailbox.

End

•

Accept the waiting call and end the

current call

All calls in the multiparty

conversation are ended

End the current call.

when the End key is

pressed.

Accept new call.

End call(s)

Press the End key.

After the Return to held call? display,

you have the following selection:

§Yes§

§No§

You accept the call on hold.

You end the second call too.

Calling

Call options

The following functions are only

available during a call:

Direct call

If this is active, only one number can

be dialled.

§Options§ Open menu.

Switch on

C ¢T¢Security¢Direct call

Hold

Hold current call.

Microphone

If switched off, the person

on the other end of the line

cannot hear you (muting).

Confirm selection.

Enter phone code.

Also:

Hold down

When first prompted you define and

enter the phone code (4 - 8 digits).

Handsfree

Playback from loud-

speaker.

Volume

Confirm selection.

Adjust handset volume.

Phonebook/Addressbook.

(p. 27)

Default book

Conference

Time/charge

Please do not forget this code (p. 17)!

Select phone number

from the Phone-

book/Addressbook or

enter it.

Display talktime that has

elapsed so far and (if set)

charges incurred during

the connection.

Confirm.

Apply

Send DTMF

Enter tone sequences

(numbers) for remote

inquiries to an answering

machine.

To dial the phone number

(e.g. Carol’s phone

§Carola§

number), press and hold

the right soft key.

Call

Connect the original call to

a second call. For you,

transfer=

both calls are now ended.

Switch off

Main menu

Call status

Access to the main menu.

Press and hold down.

List all held and active calls

(e.g. participants in a con-

ference).

Enter phone code.

Confirm input.

Calling

Tone sequences (DTMF)

You can, for example, enter control

codes (numbers) for remote access

to an automatic answering machine

while another connection exists. These

entries are transmitted directly as

DTMFcodes (control codes).

§Options§ Open menu.

Send DTMF

Select.

Using the Phonebook/Address-

book

Store phone numbers and control

codes (DTMF codes) in the Phone-

book/Addressbook in the same way

as a normal entry.

Enter phone number.

Press until a "+" appears in

the display (wait for the

connection to be estab-

lished).

Enter DTMF codes

(numbers).

If necessary, wait again

for three seconds at a

time for the receiver to

process the entries safely.

Enter a name.

§Save§

Store entry.

You may also store just the DTMF

codes (numbers) and then send

them during the call.

Default book

C ¢L ¢Select function.

Phonebook

The Phonebook is located on the SIM

card. Only one phone number can be

entered per entry. The Phonebook

on the SIM card can easily be trans-

ferred into a different phone.

Show entries

The entries in the standard directory

(Addressbook or Phonebook) are

shown.

Select a name with the

first letter and/or scroll.

J ^/

Business card

Create your own business card to

send to a different GSM-phone. If no

business card has been created yet,

you will be asked for your input.

New entry

Create new entry.

Addressbook (see also p. 31)

Phonebook (see also p. 35)

Move from field to field to

enter your details.

§Save§

Press.

Default book

Additional information

You can set which directory you pre-

fer to use.

The content of the business card and the

Addressbook entries correspond to inter-

national standards (vCard).

The selected default book is opened

in standby mode with the joystick.

Copy numbers from Address-

book/Phonebook.

Open Phonebook or

Addressbook

Groups

Addressbook

See p. 34.

In the Addressbook, a lot of data can

be recorded for each entry and addi-

tional functions (such as pictures,

birthdays, chat room) can be used.

See p. 37.

Addressbook

The Addressbook can store up to

1000 entries, each with a variety of

telephone and fax numbers as well

as additional address details. These

entries are managed in the phone

memory separately from those in the

Phonebook. However, you can

exchange data between the Address-

book and the Phonebook on the SIM

card.

Possible input fields

Last name:

URL:

First name:

Inst. message >>

Group:

Phone number:

Phone no./office: Company:

Phone no./mobile: Address: >>

Fax:

Birthday: >>

Picture:

Fax 2:

E-mail address:

E-mail 2:

New entry

The Addressbook is set as standard:

All fields

Open Addressbook

Additional information

Group: Assignment to a group

(p. 34).

(in standby mode).

Display input fields.

Select required input

fields.

Address: Extension to enter the

complete address:

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Street:, Post code:, City:,

Country:

Com. services

Information if the entry is

being used as a chat room

contact (p. 61):

At least one name must

be entered. Always enter

phone number with dial-

ling code.

Nickname:, WV user ID:, ICQ

number:, AIM screen name:

Addressbook

Birthday: After activation, the date

Display/find entry

of birth is entered.

Open Addressbook

Reminder: The telephone

reminds you one day

before the birthday.

(in standby mode).

Select required entry.

Display.

Picture:

Assign a picture to the

entry. This is displayed

when you are are called

by a corresponding phone

number.

Display options

§Options§ The options menu only

ever offers the functions

for the currently selected

input field.

All fields/Reduced fields

Displays the number of

input fields.

§Save§

Save the entry.

Move to ...

Assign current entry or

highlighted entries to a

group.

Additional information

Temporary switch to Phone-

book.

View

Display an assigned pic-

ture.

Synchronisation

Copy to SIM

Copy name and one phone

number to the SIM card

(Phonebook).

With the mobile phone manager (p. 112),

you can synchronise your Addressbook

with Outlook® and other Siemens

telephones.

Using Remote sync. you can synchronise

your mobile with an organiser stored on the

Internet (see also p. 107).

New SMS,

New MMS,

New e-mail

Create a message with the

selected entry.

Browser

Start WAP browser and

visit URL.

Inst.

message

Start a dialogue with the

selected entry (p. 61).

(For standard functions see p. 15)

Addressbook

Change entry

Addressbook options

Open Addressbook

Depending on the actual situation,

different functions will be offered.

These functions can be applied to

the entry currently selected as well

as to multiple selected entries:

(in standby mode).

Select required entry.

Press.

§Edit§

§Options§ Open menu.

Select input field.

Open entry if necessary.

Make changes.

Save.

Move to ...

Move current entry or high-

lighted entries to a group.

§Edit§

Copy to SIM

Copy name and phone

number to the SIM card

(Phonebook).

§Save§

Filter

Only those entries which

match the filter criteria are

displayed.

Call entry

Open Addressbook

Import

Sort

Set up readiness to receive

for a Phonebook entry via

IrDA (p. 86) or SMS (p. 43).

(in standby mode).

Select a name with the

first letter and/or scroll.

Specify sorting criteria for

output of the Addressbook

entries.

The number is dialled.

If there are several numbers in the

address book entry, these are

offered for selection.

Enter search term.

(For standard functions see p. 15)

Select phone number.

The number is dialled.

Addressbook

Ringtone for group

Assign a ringtone to a group that

plays when one of its members calls

you.

Groups

Nine groups are specified in your

phone to enable you to arrange your

Addressbook entries clearly. You can

rename seven groups.

C ¢T¢Ringtones¢Group calls

Open Addressbook

(in standby mode).

Select group.

<Groups> Select (the number of

entries is listed behind the

group name).

Confirm. If a ringtone has

already been set, it will be

played. Otherwise, the

ringtone list will be dis-

played and you can select

one.

Select group.

Groups menu

§Options§

Open menu.

I _{If necessary, select a}

ringtone.

Rename

group

Change name of group.

Confirm.

Group

symbol

Assign a symbol to a group.

The symbol will then appear

in the display when one of the

group members calls.

Additional information

No group: Contains all Addressbook

entries that do not belong to a group (name

cannot be changed).

Received: Contains Addressbook entries

received by IrDA (p. 86) or SMS (p. 43)

(name cannot be changed).

Phonebook

Entries in the Phonebook (on the SIM

card) are managed separately from

those in the Addressbook. You can,

however, exchange data between

the Phonebook and the Address-

book.

Phone number:

Always enter phone number with

dialling code. An entry is not saved if

it does not have a phone number.

Name:

Enter first and/or last names.

Group:

Default No group

Important phone numbers may be

combined in a group (VIP).

New entry

If the Phonebook has been selected

as standard:

Open Phonebook

Location:

Default SIM

(in standby mode).

Special SIM cards can save phone

numbers in a protected area

(Protected SIM) (PIN2 required).

Select <New entry>.

Display input fields.

Record number:

Select input field.

Each entry is automatically assigned

a record number. You can also dial

using the record number.

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

§Save§

Press to store the new

entry.

Additional information

Temporary switch to Address-

book.

§Country§ International dialling code....p. 25

Functions concerning Text entry .......p. 19

Phonebook

Call (search for an entry) Phonebook options

Open Phonebook.

The following functions are availa-

ble, depending on the current situa-

tion.

Select a name with the

first letter and/or scroll.

J ^/I

§Options§

Open menu.

Phone number is dialled.

Copy into 9

Copy all highlighted

entries to the Address-

book.

Call using record no.

A record number is automatically

assigned to every new entry in

Phonebook.

Copy all to 9

Copy all entries to the

Addressbook.

Delete all

The entire Phonebook

is deleted (PIN-pro-

tected).

Enter record number.

Press.

Import

Set up readiness to

receive for a Phone-

book entry via IrDA

(p. 86) or SMS (p. 43).

Press.

Change entry

(For standard functions see p. 15)

Open phonebook.

Select entry in Phone-

book.

§Edit§

Press.

Select desired input field.

Make changes.

Press.

§Save§

Phonebook

There might be phone numbers

saved in your Phonebook that have

been provided by your service pro-

vider. They may be used to call local

or national information services or to

use services offered by your service

provider.

Open Phonebook

(in standby mode).

Select.

Enter "own" phone numbers in

Phonebook (e.g., fax) for your infor-

mation. These numbers can be

changed, deleted and also sent as an

SMS message.

Completing phone numbers in the

Phonebook

Digits may be replaced by a "?" when

phone numbers are entered in the Phone-

book:

Press and hold down.

Display the phone numbers saved in

the VIP group.

These wildcards must be replaced with

numbers before dialling (e.g., with the

extension numbers in a phone system).

To make a call, select the phone number

from the Phonebook.

Entries stored in the Phonebook on

the SIM card can also be used on

other GSM phones.

Press.

Replace "?" with numbers.

On special SIM cards, phone num-

bers can be stored in a protected

location. PIN2 is required for editing.

The phone number is dialled.

Call records

The phone number of a caller is dis-

played if

Calls missed

The phone numbers of calls that you

have received but not answered are

stored for call back purposes.

• the caller has switched off the

Hide ID function and

Icon for missed call (in

• the network supports the "Caller

Identity" function.

standby mode). Press the

soft key beneath the sym-

bol to bring up the Inbox

(p. 42).

Alternatively, a caller’s name is dis-

played if it is stored in the Phone-

book/Addressbook.

Calls received

Accepted calls are listed.

Your phone stores the phone num-

bers of calls for convenient redial-

ling.

Calls dialled

C ¢

§View§

Access to the last numbers you have

dialled.

Select record.

Fast access in standby

mode.

Open call record.

Select phone number.

Dial phone number.

Delete records

The records are deleted.

Records menu

The records menu can be called up if

an entry is highlighted.

Display information on

the phone number.

§Options§ Open menu.

Up to 500 entries are stored in the

records:

Copy into 9/

Copy to SIM

Copy the currently

selected phone number

into the preferred direc-

tory.

(For standard functions see p. 15)

Time/charge

You can display the charges and

duration during a call. You can set a

unit limitation for outgoing calls.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

service provider to define a credit

limit or a period after which the

phone is barred for outgoing calls.

C ¢ ¢Time/charge

Select

Last call:

§Edit§

Press.

Incoming calls:

Outgoing calls:

Outgoing SMS:

Outgoing MMS:

GPRS data flow:

All calls:

Enter PIN2.

Account limit

Switch on.

Enter number of units.

Confirm.

§OK§

Remaining units:

Then confirm the credit or reset the

counter. The status display for pre-

paid cards may vary depending on

the service provider.

Scroll through the display.

Reset the selected setting.

§Reset§

Charge sett.

Auto display

Call duration and charges are

displayed automatically.

Open menu.

Personal rate

(PIN2 prompt)

Enter the currency as well as the

charge per unit and time.

Camera

You can view photos/videos

recorded on the integrated camera

immediately and

mode, the recording time already

used and the maximum recording

time still available is shown here.

• use the photo as a background

image, logo, a switch on/off ani-

mation or a screensaver.

è Camera

Ù Û

• send the photo/video via MMS or

e-mail.

Switch on

C ¢

Premium

Options

Start camera in standby

mode.

Switches between frame

and videorecording.

Photo mode

Takes a photo.

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

Displays the preview

image of the next photo.

The photo is saved with a name, the

date and the time. To enter the

name, see Setup in the options

menu.

Brightness

Zoom factor

White balance

Flash connected.

Settings prior to taking a photo:

Sets the brightness.

In the top right-hand corner of the

preview image, the number of pho-

tos which can still be taken in the

selected resolution is displayed. This

number varies considerably accord-

ing to the subject matter (storage

space required). You will find a refer-

ence to the selected resolution

Sets the zoom factor.

beneath the preview image. In video

Camera

Image resolution

The image resolution quality can be

adjusted regardless of the preview

image resolution.

Camera options

The following functions are availa-

ble, depending on the current situa-

tion.

Premium:

High:

Medium:

Wallpaper:

640 × 480 (VGA)

320 × 240 (QVGA)

160 × 120 (QQVGA)

132 × 176

§Options§ Open menu.

Settings

• Name for recordings

• Image resolution.

• Colour mode: normal,

sepia, grey tints

The resolution may decrease depend-

ing on the selected digital zoom.

Pictures

Displays list of photos.

Displays list of videos.

see also Add contact

memb.

Search for group member.

Enter welcome text.

Delete group

Delete group.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

Creating a new contact list

The current contact list is displayed.

§Options§ Open menu.

Delete

member

Delete contact from the

group member list.

Add group

Add new group.

Contact lists

Available contact lists are

Search group

Search for group on the

server (no longer in the

"administered groups"

list).

displayed.

§Options§ Open menu.

Create

Select.

Contact list ID:

Give the contact list its

own, specific name.

Name:

Allocate self-explanatory

names.

Confirm.

Inst. message

Contact list options

§Options§ Open menu.

Start chat

A contact list must be displayed.

Select a contact or a

Details =

Additional information

about the contact or the

group.

Startcommunicationwith

the contact.

My settings

Information on your cur-

rent personal status

(p. 66).

The page is displayed.

During Inst. Message with

a group, the name of the

sender is placed in front

of each contribution.

Manage

Functions for managing

a contact or a group.

Contact lists

Block list

Display contact lists for

selection.

Open editor.

Write text

Display all blocked con-

tacts. Can be unblocked.

Send text. The text

appears in the chat soon

afterwards.

Appl. settings

Suspend

Set the application

(p. 66).

Terminate the applica-

tion, the server remains

connected.

Naturally, you can also receive mes-

sages from contacts whom you do

not know. This will be pointed out to

you in the display, and you can

either switch to Inst. Message or

ignore/block the contact.

Logout

Help

Log off from the server

and return to start menu.

Display help text.

Inst. message

Options (individual contact)

§Options§ Open menu.

Receiving objects

You will be informed in the display if

sounds or pictures are sent to you

during a dialogue.

Send sound

Select and send a melody/

tone from the list (DRM

p. 13).

§Receive§ Accept object.

§Reject§

Send

picture =

Select and send a picture

from the list (DRM p. 13).

Reject object.

Send any

Details

Send any file.

Msg. history

Information about the con-

tact (if this is authorised by

him).

C _¢¢M_Msg.¢_hisI_tn_os_rt_y. message

The messages from the last meeting

are displayed. You can read and

delete the contributions.

Clear all

Delete all texts in the cur-

rent Inst. Message.

Block

contact

No more messages are

received from the contact

and the contact receives

no status information from

you. This function works

for all your lists.

Requirement: The server must be

disconnected, see Suspend (p. 64)

and Automatic login: (p. 66).

Setting

C ¢_¢M_Selec¢_{t f}I_un_nst_c._tm_ioe_ns_.sage¢Setup

Account

Options (group contact)

§Options§ Open menu.

Leave group

Details

Exit group.

The list of available accesses is

displayed.

Information about the

group:

Group ID:, Name:, Topic:,

Owner:

Select an access to estab-

lish a connection.

I ^C

Clear all

Delete all texts in the cur-

rent Inst. Message.

<New entry>/Account sett.

Set up an access or

change the settings as

specified by the service

provider. Depending on

Inst. message

the service provider, the

settings may not be

changeable.

§Options§ For each setting, specify

who is allowed to view

your personal informa-

tion:

Name:

Name of the access.

Public

URL:

Enter URL, e.g. http://

www.abc.com

All contacts.

Private

User ID:

Contacts designated as

Friend: (p. 62).

Enter a non-ambiguous

user (login) name.

Hidden

Nobody.

Password:

Enter password (shown

as a series of asterisks).

Appl. settings

Settings for the application used:

My settings

Information on your current per-

sonal status:

Automatic

Auto-reconnect to the

last access to be used.

Alias:

Your own alias by which

you can be found on the

server.

Timeout:

Time without action after

which the application is

terminated. However, the

server remains con-

nected.

AIM screen

name:

Name to be displayed in

the group.

Message info:/

Online info:

Mood:

Signal the receipt of mes-

sages: Yes/No

Information about your own

mood, e.g.

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows

authorised: Yes/No

Happy, Sad, Sleepy, etc.

Status text:

Availability:

Random text information,

e.g. “Am at home”.

Availability:

Available, Not available,

Discreet

Mobile:

Enter the phone number

with internal extension

code.

CB services

C ¢M ¢Setup¢CB services

Topic

Select.

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

you will receive messages on the

activated topics in your Topic list.

§Options§ Open list menu.

If a topic is selected in the list you

can view it, activate/ deactivate it,

edit it or delete it.

CB languages

CB messages are displayed in

standby mode, longer messages are

scrolled automatically.

Receive Cell Broadcast messages in

only one specific language or in all

languages.

Receive CB

Displays

Ö,Õ

You can activate and deactivate the

CB service. If the CB service is acti-

vated, standby time for the phone

will be reduced.

Topic activated/deactivated.

New messages received on

the topic.

Topic list

Messages already read.

You can add any topics to this per-

sonal list from the topic index. You

can preset 10 entries with their

channel numbers (ID) and, if applica-

ble, with their names.

New topic Select.

• If no topic index is available, enter

a topic with its channel number

and confirm with §OK§.

• If the topic index has already been

transmitted, select a topic and

activate it with §Options§.

Surf & fun

Get the latest information from the

Internet that is specifically adapted

to the display options of your phone.

In addition, you can download

games and applications to your

phone. Internet access may require

registration with the service pro-

vider.

Go to...

Enter URL for direct dial

to an Internet address,

e.g. wap.siemens-

mobile.com

Reload

Reload current page.

Show URL

Display the URL of the

page currently loaded for

sending via SMS/MME/

e-mail.

Access to the service

provider

Direct call-up of the browser with

the URL from your service provider.

History

Display last Internet sites

to be visited.

Disconnect

File

Disconnect the Internet.

Save object on the current

page or save the com-

plete page; display saved

pages.

Internet

C ¢ ¢Internet

Setup

The browser is activated with the

pre-set option as soon as you call up

the function (Browser settings, p. 69;

may be specified/pre-assigned by

service provider).

Set or reset browser

(p. 69).

Exit browser

Close the browser.

End connection

Browser menu

§Options§ Open menu.

Press and hold to clear

down the connection and

close the browser.

Homepage

Call up the pre-set

homepage for the current

profile.

Navigation in the browser

• Select a link.

• Settings, status on/off.

Bookmarks

• List bookmarks Dis-

play list of bookmarks

stored in the phone.

• Bookmark site The

current page is saved

as a bookmark.

• Press briefly: back a page.

• One input field/link forward/back.

• Scroll one line.

Surf & fun

Display symbols in the browser

(selection)

Your Internet browser is licensed by:

Connect

Network

No network

GPRS online

Profiles

Enter special characters

Preparation of the phone for Internet

access depends on the service pro-

vider concerned:

* ^,0

Select important special

characters.

Browser settings

Profile pre-set

In most cases, access profiles have

already been created for one or more

service provider(s).

C ¢ ¢Internet

§Options§ Open menu.

Setup

Select.

Select profile.

Browser

Set start option as well as

handling of pictures and

sounds plus send options.

Activate profile.

Set profile manually

If necessary, contact your service

provider.

Profiles

The list of profiles is dis-

played for activation/setting.

For more information, con-

tact your service provider.

§Options§ Open menu.

Edit

Start processing. For the

Internet-specific settings

below, pleasecontactyour

service provider.

Protocol

parameters

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

Delete

Delete selected profile.

Security

Context

Set encryption.

Reset session; delete

cache, history and cookies.

Surf & fun

Bookmarks

C ¢ ¢Bookmarks

Display URL/call up page

List bookmarks

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Save

Bookmark site

The current page is saved

in the phone as a book-

mark.

Bookmark options

§Options§ Open menu.

Here you will find functions for

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

Surf & fun

Download new

Games and Applications

Select a service provider

or URL.

Games and applications are offered

on the Internet. Once downloaded,

these are permanently available on

your phone. Most applications

include instructions. Some applica-

tions and games are already pre-

installed on your telephone. You will

find these listed here:

Start WAP browser and

visit URL.

Description file only

The description file is

loaded for information

purposes only. The appli-

cation/game itself must

be loaded separately.

www.siemens-mobile.com/m65

Requirements

WAP profile (p. 69) and the access

(p. 87) must be configured.

or complete download

The application/game is

completely loaded.

Download

Select the correct access depending

on whether you are loading games

or applications:

Apply

Remember that applications/games

may be protected (DRM, p. 13).

The executable applica-

C ¢O¢Games

tion is saved on the tele-

phone and can be started

immediately .

C ¢O¢Applications

In addition to URLs and service pro-

viders for the download, any availa-

ble applications/games and folders

will be displayed.

Downl. assis.

C ¢O¢Downl. assis.

You will not be left on your own dur-

ing the download!

Surf & fun

Additional information

You can use WAP to download applications (e.g.

ringtones, games, pictures, animations) from the

Internet. Downloading or running applications will

not affect or change the software already

The following key control is used for many

games (virtual joystick):

installed on your Java™-enabled mobile phone.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

purchaser bears sole risk for the loss of, damage

to, and any defects arising in, this device or the

applications and for any direct damage or conse-

quential damage of whatever nature resulting

from the use of this application.

1 2

4 5

7 8

Games and Applications options

For technical reasons, such applications and sub-

sequent enabling of certain functions are lost in

the event of the device being replaced/re-sup-

plied and may be lost if it is repaired.

In such cases, the buyer is required to download

or release the application again. Please ensure

that your phone has Digital Rights Management

(DRM) so that individual applications downloaded

via WAP are protected from unauthorised repro-

duction. These applications are then exclusively

intended for your phone and cannot be trans-

ferred from this even to create a backup.

Processing and managing your appli-

cations and folders:

Move

Move applications between

folders.

New folder

Reinstall

Create and name new

folder.

Reinstall an application

(update).

Siemens does not warranty, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. If technically possible, secure your appli-

cations on the PC with the "mobile phone man-

ager", p. 112.

Security

Reinstall

Select a safety level.

Repeat after transmission

error.

Attributes

Show details of the applica-

tion/folder (name, version,

size, path, producer, date).

HTTP

profile

Display profile list for

activation/setting

(For standard functions see p. 15)

Setup

Profile settings

Edit a default profile or create a new

personal profile:

Profiles

C ¢T¢Profiles

Several settings can be stored in a

phone profile in order, for example,

to adapt the phone to the surround-

ing level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Five standard profiles are provided

with default settings. They can be

changed however:

Select.

The list of available functions is dis-

played.

Normal environment

Quiet environment

Noisy environment

Car Kit

When you have finished setting a

function, you return to the profile

menu where you can change a fur-

ther setting.

Headset

Additional information

• Call up the list in standby mode:

• You can set two personal profiles

(<Name>).

The profile list is displayed.

• The special profile Aircraft mode is

fixed and cannot be changed.

• The active profile is identified with ·.

Switch on

Select default profile or

personal profile.

Switch on profile.

Setup

Profile options

Aircraft mode

§Options§ Open menu.

All alarms (appointments, alarm

clock) are deactivated. This profile

cannot be modified.

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Switch on

Scroll to Aircraft mode.

Copy settings from

another profile.

Confirm selection.

Rename

Change personal profile

(except default profiles).

Confirm safety inquiry

again in order to activate

the profile. The phone

switches itself off auto-

matically.

Car Kit

If an original Siemens Car Kit is used,

the profile is switched on automati-

cally as soon as the phone is inserted

into the cradle (also see accessories).

Normal mode

When you switch on your phone

again, the previously set profile will

be reactivated automatically.

Headset

The profile is only switched on auto-

matically if an original Siemens

headset is used (also see accesso-

ries).

Setup

Themes

C ¢T¢Themes

Load a completely new visual pres-

entation onto your phone. At the

press of a key various functions are

re-organised on a topic basis, e.g.

Switch on/off animation, back-

ground image, screensaver, switch

on/off melody, additional anima-

tions.

Topic files are compressed to save

memory space. After being down-

loaded (p. 71) or called up from

My stuff, these are automatically

unzipped when activated.

Activate new topic

Select topic.

Display topic preview.

Activate new topic.

Setup

Wallpaper

Set wallpaper graphic for the display.

Display

C _¢¢_ST_ele¢_ctD_fi_us_npl_ca_ty_ion.

Logo

Language

Choose graphic to be displayed

instead of the provider logo.

Set the language of the display text.

When "automatic" is set, the lan-

guage of your home service provider

is used.

Colour skin

Select colour skin for the entire user

interface.

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

Screensaver

The screensaver shows a picture in

the display as set by you. An incom-

ing call and/or pressing any key will

end the function except if the safety

function is activated.

_{# 0 0 0 0 #}A

Text input

Preview

Display the screensaver.

T9 preferred

Activate/deactivate intelligent text

entry.

Style

Select Analogue clock, Digital clock,

Input language

Bitmap, Energy saving

Select language for text entry. Lan-

guages with T9 support are marked

with the T9 symbol.

Bitmap

Select image in My stuff.

Setup

Timeout

Own greeting

Set period after which the screen-

saver starts.

Enter greeting to be displayed

instead of animation when phone is

switched on.

Security

The phone code is requested to ter-

minate the screensaver.

Big letters

You can choose between two font

sizes for the display.

Auto key lock

Automatic keypad locking if no key

has been pressed for one minute in

standby mode.

Illumination

Set display illumination to

brighter/darker. The darker the set-

ting the longer the standby time.

Unlocking:

Press and hold down.

Press the joystick repeat-

Note

edly at the top/bottom to

adjust up or down.

The animated Bitmap screensaver and the

Digital clock considerably reduce the

phone’s standby time.

Start up anim.

Select animation to be shown when

phone is switched on.

Shutdn anim.

Select animation to be shown when

phone is switched off.

Setup

§Change§ Display the possible

Dynamic light

rhythms.

C _¢¢_ST_ele¢_ctD_fy_un_na_cm_tii_oc_nli_.ght

Select them from several

flash rhythms.

The LEDs on the sides of the phone

are used to signal different functions

visually.

Assign selection.

Play demo

All flash rhythms are displayed in

sequence.

Show effects

Switch on function.

§Cancel§

Terminate.

Select

You can set the visual signals for the

following functions:

Standby

Net search

d Calls

Group calls

Other calls

During a call

Incoming msgs

Appointments

CarKit conn.

Low battery

During on/off

Soundplayer

Setup

Volume

Set different volumes for types of

call/functions.

Ringtones

C _¢¢_ST_ele¢_ctR_fi_un_ngt_co_tn_ioe_ns_.

Select

Set the signal tones on the phone to

suit your requirements.

Incoming call

Messages

Alarm clock

Organiser

System

Ringer setting

On/off

Activate/deactivate all

tones.

Beep

Reduce ringtone to a

short signal (beep).

Applications

The ringtone plays again.

Set volume.

Silent alert

To avoid the disturbance caused by a

ringing phone, you can activate the

silent alert function as an alterna-

tive. The silent alert can also be acti-

vated in addition to the ringtone

(e.g. in noisy environments). This

function is deactivated when the

battery is being charged and acces-

sories are connected (except the

headset).

Confirm setting.

Additional information

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Select from several silent

alert versions.

Setup

Assign ringtone

A ringtone which has already been

selected will be played or the list of

possible ringtones will be displayed

for selection.

d Calls

Assign a single ringtone to all phone

numbers in the Addressbook.

Group calls

Assign a different ringtone to each

group.

Other calls

Assign one ringtone to the remain-

ing calls.

More melodies

Assign further ringtones for:

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

or record new tones with:

Sound recorder (p. 104)

Setup

Condition set.

Call setup

C _¢¢_ST_ele¢_ctC_fa_ul_nl s_ce_tt_ioup_n.

Not set.

Display if status is

unknown (e.g. with a new

SIM card).

Hide ID

Clear all

When you make a call, your phone

number can be displayed on the

recipient's display (depending on the

service providers).

All set diversions are cleared.

Set up call divert (example)

To suppress this display, you can

enable the "Hide ID" mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

The most common condition for call

divert is, for example:

Unanswered

Select Unanswered.

(Includes the conditions

Not reachable, No reply,

Busy, see below)

Call waiting

Set

Confirm.

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it .

Select.

Confirm.

Divert

Select or enter the phone

number to which the calls

are to be diverted.

Ï J

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.

§Mailbox§ Use existing mail-

box phone numbers, or

enter them if necessary.

Status check

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and dis-

played.

Confirm. After a short

pause, the setting is con-

firmed by the network.

Setup

All calls

All calls are diverted.

Call screening

Only calls from phone numbers that

are in the Phonebook/Addressbook

or assigned to a group are signalled.

Other calls are only displayed.

Icon in the top line of the

display in standby mode.

Not reachable

Divert occurs if phone is switched off

or is out of range.

Any key answ.

Incoming calls can be accepted by

pressing any key (except for B ).

No reply

A call is only diverted after a delay

that is determined by the network.

This can take up to 30 seconds (may

be set to 5 second intervals).

Minute beep

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The person you are

talking to does not hear this beep.

Busy

Divert occurs if a call is in progress. If

Call waiting is activated (p. 25) you

will hear the call waiting tone during

a call (p. 27).

Receiving fax

Fax calls are diverted to a number

with a fax connection.

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Additional information

Note that the divert is stored in the network

and not in the phone (e.g., when the SIM

card is changed).

Reactivate divert

The last divert has been stored. Proceed

as with "Set divert". The stored phone

number is displayed. Confirm number.

Setup

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Phone setup

C _¢¢T_Sele¢_ctP_fh_uo_nn_ce_tis_oe_ntu_.p

Key tones

Set the type of acoustic key

acknowledgement.

Alternatively, in standby mode

enter: # 0 6 #

§Info§

Display further informa-

tion about the appliance.

Info tones

Set service and alarm tones:

Device check

A self-test and individual tests are

offered at the end of the last page of

information. If you select Selftest, all

individual test are carried out.

On/off

Activate/deactivate tones.

Extended If switched on, a wider

range of service tones is

available, e.g.: end of

Software version

Display the software version for your phone

in standby mode:

menu reached, network

connection interrupted.

# 0 6 #, then press §Info§.

Automatic switch off

The phone switches off each day at

the set time.

Memory assis.

The delete assistant will help you if

there is insufficient phone memory.

If required it can also be started

automatically from applications.

Activate

§Time§

Press.

Enter time

(24-hour clock).

After their capacities have been

checked, all files and folders are dis-

played along with their size and may

be viewed/opened and, if necessary,

deleted.

Deactivate

Confirm.

§Manual§ Press.

Confirm.

Setup

File system

Format

(Phonecode-protected)

The phone memory is formatted and

all saved data such as ringtones, pic-

tures, games etc. are deleted.

Clean up

Creating more memory by deleting

temporary files that are no longer

required.

Master reset

Reset phone to default values (fac-

tory setting). This does not affect the

SIM card or the network settings.

Alternatively enter in standby mode:

# 9 9 9 9 #

Setup

Open menu.

§Options§

Set

Clock

C _¢¢_ST_ele¢_ctC_fl_uo_nck_ction.

Set time zone.

Auto time

Have the time zone auto-

matically set by the net-

work.

zone

Time/date

The clock must be set correctly at

start-up.

Search city

Help

Search for a city.

Operating instructions.

§Change§ Press.

First enter the date

Date format

Select the display format for the

date.

(day/month/year), then

the time (hours/min-

utes/seconds).

Time format

Additional information

If the battery is removed for longer than

30 seconds, the clock must be reset.

Select 24h or 12h.

Buddhist year

Switch to the Buddhist year (not on

all phone models).

Time zones

The time zone can be selected in the

world map or a city list:

Show clock

Activate/deactivate time display in

standby mode.

World map

Select the desired record-

ing.

Auto time zone

The time zone is identified automati-

cally.

City list

Select a city in the

selected time zone.

Setup

GPRS info

Displays information on connection

status.

Connectivity

C _¢¢_ST_ele¢_ctC_fo_un_nn_ce_tc_ioti_nvi_.ty

IrDA

GPRS

Your phone has an infrared inter-

face. With this interface, you can

exchange data such as pictures, ring-

tones, Addressbook entries, busi-

ness cards or organiser data with

other devices which also have an

infrared interface.

(General Packet Radio Service)

Switch GPRS on/off

GPRS is a method for transmitting

data faster in the mobile network.

Use GPRS and if the network has suf-

ficient capacity, you can be con-

nected to the Internet permanently.

Only the actual transmission time is

charged by the network operator.

Some service providers do not yet

support this service.

The infrared interface is on the right

side of the phone. The distance

between the two devices must not

exceed 30 cm. The infrared windows

in both appliances must be aligned

as accurately as possible with each

other.

Shown in the display

Shown on the display:

Activated and available.

IrDA activated.

Registered.

During transmission.

Temporarily interrupted.

Setup

Data services

HTTP profile

Basic setting and activation of the

connection profiles for data trans-

mission such as MMS, WAP.

The phone default setting varies

from service provider to service pro-

vider.

The phone default setting varies

from service provider to service pro-

vider.

• The settings have already been

implemented by the provider. You

can start immediately.

• The settings have already been

implemented by the provider. You

can start immediately.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• The access profiles must be con-

figured manually.

• The access profiles must be con-

figured manually.

If necessary, check with your service

provider for details. You will find the

current settings for the service pro-

vider in the Internat at this address:

www.siemens-mobile.com/customercare

in the "FAQ" section.

If necessary, check with your service

provider for details. You will find the

current settings for the service pro-

vider on the Internet at this address:

www.siemens-mobile.com/customercare

in the "FAQ" section.

Make the settings.

Authentication

Select profile

Activate or deactivate encrypted

Internet dial-up (CSD connections

only).

Select the profile.

Confirm selection.

Set profile

Select the profile.

§Options§

Open menu.

§Edit§

Open the selection.

Select CSD settings, and/or

§Edit§

GPRS settings.

Make the settings as spec-

ified by your service pro-

vider.

Setup

Rec. voice/fax

(Only if no special fax or data number

is available).

Fax/data

Fax/data mode using a PC

With the phone and a connected PC,

you can transmit and receive faxes

and data. Appropriate software for

fax and data communication must

be available on your PC and there

must be a connection to the phone.

Start the required communication

program on your PC and select the

function on the phone during the call

(the PC will take over the connec-

tion).

End transmission

Fax and data services must be ena-

bled by the service provider. There

are variations in fax and data recep-

tion, depending on the network.

Please ask your service provider

about this.

End transmission with PC software

and/or press

Rec fax/data

Your service provider has given you a

number for telephoning and a fax/

data number.

Send voice/fax

Set this function on the phone before

transmission so that you can switch

from voice mode to fax mode.

The call is signalled by a special ring-

tone and the type of call (fax or data)

is displayed. Now start the commu-

nication program on your PC to

receive the fax/data.

Setup

Only ‚

(PIN2 or phonecode-protected)

Security

C ¢_¢ST_ele¢_ctS_fe_uc_nu_cri_tt_iy_on.

Dialling options are restricted to SIM-

protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.

Auto key lock

The keypad is locked automatically if

no key has been pressed for one

minute in standby mode. This pre-

vents the phone from being used

accidentally. However, you can still

be called and you can still make an

emergency call.

If the SIM card does not support PIN2

input, the whole Phonebook can be

protected with the phone code.

This SIM only

(Phonecode-protected)

Additional information

The keypad can also be directly locked and

unlocked in standby mode.

The phone can be connected to a

SIM card once the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.

In each case:

Hold down.

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Direct call

(Phonecode-protected)

Only one phone number can be

dialled (see also p. 28).

Codes

For description see p. 17:

PIN control, Change PIN, Change PIN2,

Chg.phonecode

Setup

When roaming

Barrings

You do not receive calls when you

are outside your home network. This

means that no charges are incurred

for incoming calls.

Barring restricts the use of your SIM

card (not supported by all service

providers). You need a 4-digit net-

work password for network barring.

Your service provider will give you

this password. You may need to be

registered separately for each

barring.

Status check

The following information can be

displayed after a status check:

Barring set.

All outgoing

All outgoing calls except emergency

numbers are barred.

Barring not set.

Status unknown

(e. g. new SIM card).

Outgo internat

(International outgoing)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x.home

(International outgoing without

home country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

All incoming

The phone is barred for all incoming

calls (forwarding all calls to mailbox

provides a similar effect).

Setup

Network info

The list of GSM networks currently

available is displayed.

Network

C _¢¢_ST_ele¢_ctN_fe_ut_nw_co_tr_ik_on.

Indicates non-authorised

service providers

(depending on SIM card).

Line

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Choose netwrk

Network search is restarted. This is

useful if you are not on your home

network or want to register on a dif-

ferent network. The network list is

rebuilt when Auto network is set.

Select line

Select the currently used phone

number.

Display current phone

number.

Auto network

Activate/deactivate, see also "Choose

netwrk" above. If "Automatic net-

work" is activated, the next network

on the list is dialled in ranking order

of your "preferred networks". Other-

wise a different network can be

selected manually from the list of

the available GSM networks.

Protected

(Phonecode-protected)

You may limit usage to one phone

number.

Additional information

Special settings may be made for each

phone number (e.g., melody, call divert

etc.) To do this, first switch to the required

phone number.

Pref. network

Enter your preferred service provid-

ers here for when you leave your

home network (e.g. if there are dif-

ferences in price).

Switch from phone number / connection in

standby mode:

Press.

§Line 1§

Press.

Setup

Your service provider is displayed:

User group

§List§

Display list of preferred

networks.

Depending on the service provider,

you can create groups with this

service. These can have access to

internal (company) information, for

example, or special tariffs apply. The

details can be clarified with your

service provider.

Create/change entry:

<Empty> or select an existing entry,

then select a new service

provider in the list and

confirm.

Active

Record new service provider (last

entry in the list):

Activate/deactivate function. "User

group" must be deactivated for nor-

mal phone use.

Furth.network

Select, enter the provider data and

save it.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are

obtained from your service provider.

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.

All outgoing

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls within the

group are permitted.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900.

Pref. group

If activated, calls may only be made

within this standard user group

(depending on the network configu-

ration).

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

Setup

Headset

Accessories

Only in conjunction with an original

Siemens headset (see accessories). If

an original Siemens headset is used

the profile is automatically activated

when the headset is plugged in.

C _¢¢_ST_ele¢_ctA_fc_uc_ne_cs_ts_io_or_nie_.s

Car Kit

Only in combination with an original

Siemens handsfree car kit (see

accessories). The car kit profile is

activated automatically once the

phone is inserted into the cradle.

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds (except where

the ringer is switched off or set to

beep). You should therefore be

wearing the headset.

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds. Eavesdropping

is possible!

Automatic setting

Accept call with Call key or PTT key

(Push To Talk), even when the auto

key lock is activated.

Shown on the display.

Automatic switch off

Auto answer

(factory default: 2 hours)

If you do not notice that your phone has

accepted a call, there is the danger that the

caller may eavesdrop.

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the time at which the phone

switches off automatically.

Car loudspk.

Improves playback in certain circum-

stances.

Automatic settings

• Permanent illumination:

switched on.

• Key lock: switched off.

• Charging the phone battery.

• Automatic activation of car kit pro-

file when the phone is inserted.

My menu

Press.

Change menu

§My menu§ Press.

You can replace each entry (1–10)

with another entry from the selec-

tion list.

Create your own menu with fre-

quently used functions, phone num-

bers or Internet pages.

Select the required entry.

The list of 10 entries is preset. You

can, however, change it as you like.

§Change§ The function list is opened

for selection.

Select the new entry from

Use

the list.

Select the required entry.

Confirm. The entry is

saved.

Confirm.

If Phonebook is selected,

the phone number must

also be selected; if Internet

is selected, the bookmark

must also be selected.

If the entry selected is a

phone number, you can

also call it with the Call

key.

Reset all

(Phone code required)

§Reset all§ Select. After a security

prompt, the pre-assign-

ment is reset.

Fast access

You can assign one important phone

number or a function to each of the

two soft keys and number keys 2 to 9

(speed-dial numbers). The phone

number can then be dialled or the

function can be started at the touch

of a button.

Soft keys

Change

For example, the Internet function is

assigned to the soft key. To change

this (in standby mode):

§Internet§ Press briefly.

§Change§ Scroll to new assignment

in the list.

Service provider

Confirm.

• Special case Phone number. Pick

out a name from the Phone-

book/Addressbook for assignment

to the key.

01.03.2004

Internet

10:10

Help

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

Additional information

The service provider may have already

assigned functions to a soft key (e.g.,

access to "SIM services" or direct call-up of

the Internet portal). It may not be possible

to modify this key assignment.

The left soft key may sometimes be

replaced automatically by p /À to

access a new message for example.

Apply

In standby mode:

Application

"Internet" is just used as an example

here.

§Internet§ Press and hold; the appli-

cation is started.

Phone number

The setting "Carola" is used here only

as an example.

§Carol§

Press and hold, the phone

number is dialled.

Fast access

Apply

Speed dialling keys

Select a stored phone number or

start a stored application (e.g. Inter-

net).

Number keys 2 to 9 can be used as

speed dialling numbers for fast

access. Number key 1 is reserved for

the mailbox phone number (p. 60)

and number key 0 is reserved for

switching over two connections dur-

ing use (p. 91).

In standby mode:

Press briefly.

The assignment of the number key 3

is displayed above the right soft key

e.g.:

Change

In standby mode:

§Internet§ Press and hold down.

Or simply

Press number key briefly

(e.g. number 3).

Press and hold down.

If this number is still free:

§Set§

Press.

Select a new function

from the list and confirm

with §OK§.

If an assignment has

already been made to this

key (assignment dis-

played above the right

soft key):

§Change§

Press briefly.

Scroll to application in the

list.

Confirm.

• Special case Phone number. Pick a

name from the Phone-

book/Addressbook for assignment

to the key.

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

Organiser

Daily view

Special displays:

Calendar

C ¢Q¢Calendar

Description of appointment.

Navigation:

You can enter appointments in the

calendar. Time and date must be set

for the calendar to work correctly.

One day forward/back.

The calendar offers you three views:

To the start/end of the day

or next/last entry.

Monthly view

Special colour coding:

Calend. setup

Day with entries for appointments,

day-long appointments, weekends.

C ¢Q¢Calend. setup

Start of day:

Navigation:

Time when the working day begins.

One day forward/back.

Start of week:

Weekday on which the monthly and

weekly view on the left starts.

One week forward/back.

Daily view open.

Set weekend

Set the days for the weekend.

Show birthdays:

Weekly view.

Special displays:

Appointments are shown as a verti-

cal colour bar on the horizontal hour

division.

Synchronising with a PC

With the mobile phone manager (p. 112),

you can synchronise appointments, tasks

and memos with Outlook^®.

Navigation:

One day forward/back.

Forward/backward by the

hour through the day.

Organiser

Different input/selection fields are

displayed depending on the type.

The number of fields can be

restricted, see Standard at the end of

the list.

Appointments

C ¢Q¢Appointments

Appointments are displayed in

chronological order in a list.

Description:

Description of appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from the Addressbook.

Select.

Types:

Memo

Voice memo:

Enter a voice recording, see Dictating

mac, p. 101.

Text input for description.

Voice memo

Entervoicememo. Shown

Location:

Location of appointment.

with alarm.

Call

Whole day:

All-day appointment: Yes/No

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment starts.

Meeting

Start time:

Time when appointment starts.

Text input for description.

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

Organiser

Alarm time:

Information on the alarm

When the set date and time are

On/off or Silent alert.

reached there is an audio and a vis-

ual alarm. If an alarm is missed it

appears in the list of missed appoint-

ments (p. 100).

Enter the period of time

before the appointment

and select the time unit:

Minutes, Hours, Days

Alarm type Memo:

Reoccurrence:

Select a timeframe for repeating the

appointment:

Meeting: The text is shown in the dis-

play.

Alarm type Call: The phone number

is displayed and can be dialled

immediately.

No, Daily, Weekly, Monthly, Yearly

Enter a parameter for repeating:

Forever, Until, Occurrences (number).

Alarm type Birthday: You can send

special birthday greetings by SMS,

MMS, e-mail or a call via §Options§.

If Weekly is selected, certain week-

days can be highlighted.

Use Snooze to set the alarm to

repeat.

Standard

In the list, select those fields which

are to be offered for future entries.

Tasks

Additional information

C ¢Q¢Tasks

Display above set alarms:

A task is displayed like an appoint-

ment in the agenda of the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task

appears at the top of the list every

day until it is marked as completed.

Alarm clock

Appointment

An alarm sounds even when the phone is

switched off (except in Aircraft mode,

p. 74). The phone does not go to standby

mode. Pressing any key will lead to

Snooze (see below).

The entries are made in the same

way as Appointments (see "Appoint-

ments"). Then:

100

Organiser

Status:

Missed appts.

Select Done or Outstanding.

C ¢Q¢Missed appts.

Priority:

Events with an alarm (Appointments,

Tasks) to which you have not reacted

are listed for reading.

Select 5 levels from Lowest to Highest.

Use date

If activated with Yes, the following

time-input option is offered.

Organiser options

Due date:/Expiry time:

Enter the date and time by when the

task is to be completed.

Depending on the application used

(Calendar, Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

Alarm: and Standard as for Appoint-

ments.

§Options§ Open menu.

Delete

Delete entry.

Notes

Delete until

Delete all entries prior to a

certain date.

C ¢Q¢Notes

Write and manage brief text memos.

Delete all

Delete all entries after

confirmation.

Enter a new memo

Delete

done

Delete all completed tasks.

Select.

Activate/

Deactivate

Switch alarm on/off.

Enter text. The first line is

displayed as a "Title" in the

memo list. Total length:

max. 160 characters.

Filter

Display all entries with the

selected feature.

Confiden-

tial

Protect note with phone

code. We recommend that

you do not store any pass-

words (PIN, TAN etc.) as

notes.

§Options§ Open menu.

Save

Save memo. When Confi-

dential is selected, a memo

is protected with the

phone code.

(For standard functions see p. 15)

Organiser

101

New recording

Dictating mac

C ¢Q¢Dictating mac

Select.

Use the dictating machine to record

short voice memos.

The remaining time avail-

able, as well as the record-

ing time, are shown in the

display.

• Use your phone as a dictating

machine when on the move.

• Record a memo as a reminder or

as a note for others.

A brief beep sounds when

the recording starts.

• Add a voice memo to an appoint-

ment in the calendar.

Pause/record alternately.

• Record a call - useful for remem-

bering numbers or addresses.

End recording.

The recording is automat-

ically saved with a time

stamp. Rename with

§Options§.

Warning!

The use of this feature may be subject to

restrictions under criminal law.

Please inform the other party to the conver-

sation in advance if you want to record the

conversation and please keep such record-

ings confidential.

You may only use this feature if the other

party to the conversation agrees.

Playback

Select the desired record-

ing.

Playback/pause.

Press and hold for rapid

rewind and fast forward.

D E

Dictating machine options

§Options§ Open menu.

Loudspeaker

Playback via the built-in

loudspeaker.

(For standard functions see p. 15)

102

Organiser

Time zones

C ¢Q¢Time zones

The time zone can be selected in the

world map or a city list:

World map

Select the desired record-

ing.

City list

Select a city in the

selected time zone.

Time zone options

§Options§

Open menu.

Set

Specify the time zone.

Auto time

The time zone is switched

automatically to local time

by the network.

zone

Search city

Help

Search for a city.

Operating instructions.

Extras

103

Extras

Set alarm call time

(hh:mm).

SIM services (optional)

C ¢ ¢SIM services

Switch to week days.

Your service provider may offer spe-

cial applications such as mobile

banking, share prices, etc. via the

SIM card.

Navigate to the various

days.

Display options: alarm call

time and days.

If you have such a SIM card, the SIM

services will appear in the main

menu under "Extras" or directly

above the soft key (on the left).

Alarm clock

§On§

Symbol for SIM services.

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone can support future addi-

tions in your service provider's user

package. For further information,

please contact your service provider.

07:30

Mo Tu We Th Fr Sa Su

Edit

Set days for alarm calls.

Press again to delete the

highlighting.

Alarm clock

Press and hold to high-

light/unhighlight all the

days.

C ¢ ¢Alarm clock

The alarm will ring at the time set by

you, even when the phone is

switched off.

§OK§

Confirm setting.

Additional information

Screen display in standby

mode: alarm clock activated.

Use Snooze to set the alarm to repeat.

Activate/deactivate the

alarm.

Switch to time setting.

104

Extras

Playback

Sound recorder

Select the desired record-

ing.

Use the sound recorder to record

noises and sounds for use as ring-

tones. The sound recorder is usually

started from other applications/func-

tions such as assigning a ringtone.

Playback/pause.

D E

Press and hold for rapid

rewind and fast forward.

New recording

§Options§ Open menu.

Start from main menu

Loudspeaker

Playback via the built-in

loudspeaker.

C ¢ ¢Sound recorder

Set as...

Set the recording as a

ringtone.

Select.

The remaining time avail-

(For standard functions see p. 15)

able, as well as the record-

ing time, are shown in the

display.

Start it from another application

as follows

The recording display appears:

A brief tone sounds when

the recording starts.

Pause/record alternately.

End recording.

The recording is saved

with a timestamp in the

Sounds folder. Rename

with §Options§.

§Insert§

Transfer the recording

into the application.

Extras

105

Calculator options

§Options§ Open menu.

Calc.

C ¢ ¢Calc.

The calculator can be used in a basic

version and with an advanced range

of functions. The input line and two

calculation lines (including the

matrix with the calculation func-

tions) are located in the top half of

the display.

Convert

Call up the unit con-

verter with the current

result.

Clear all

Delete all units.

Extended mode/

Basic mode

Convert calculation

functions.

(For standard functions see p. 15)

Enter digit(s).

Navigate functions.

Unit converter

Use function. The result is

calculated and displayed

immediately.

C ¢ ¢Unit converter

You can convert various measure-

ment units into other measurement

units.

Basic functions:

+, -, *, /

Basic calculation types

Result

Reversion

Convert to percentage

Decimal point.

Sign change "+"/"–"

The following types are offered with

various units:

1/x

Velocity

Energy

Mass

Pressure

Time

§Options§ Expansion of the range of

functions:

Volume

Area

Square root

Square

Exponent

Save displayed number

Call up saved number

Insert number from memory

Length

Power

M+

Temperature

Currency

106

Extras

Example for Velocity units:

Now enter the name and exchange

rate of the currencies to be con-

verted.

Type

Units

Velocity

Kilometres/h, Metres/sec,

Miles/h, Miles/sec, Knots,

Mach

§Options§ Open menu.

Add currency

Set as base

Edit rate

Enter new currency and

exchange rate.

Use entered currency as

basic currency.

Converting the units/currency

Select the source unit/cur-

rency.

Change the exchange

rate of the basic currency.

Switch to the input field.

Calc.

Start calculator.

Enter the quantity to be

converted.

(For standard functions see p. 15)

Switch to the selection

Stopwatch

field.

Select the target meas-

C ¢ ¢Stopwatch

urement unit/currency.

The result is displayed

immediately.

Two intermediate times can be

recorded and saved.

Start/stop.

You can use both input fields alter-

nately.

Save intermediate time.

Special key functions:

After a stop:

Set decimal point.

Reset to zero.

Change sign.

Stopwatch options

§Options§ Open menu.

Currency

When you call up the function, you

must enter a basic currency into

which the conversions are to be

made.

Stopwatch

list

Display saved entries.

(For standard functions see p. 15)

Enter currency

(e.g. euro).

§Save§

Store entry.

Extras

107

Countdown

Remote synchronisation

C ¢ ¢Countdown

C ¢ ¢Remote sync.

A set time elapses. The last 3 seconds

are indicated by a beep. At the end a

special beep sounds.

You can use this function remotely

to access externally filed data

(addresses, calendar, etc.) and syn-

chronise these with the data on your

phone. The data can, for example,

be saved on a company computer or

the Internet e.g.:

If no time has been entered:

Open input window.

Set period of time.

Confirm.

www.siemens-mobile.com/syncml

Synchronise

If a countdown time is specified:

§Sync§

The computer is selected

and synchronisation

started. When completed,

the actions which have

been performed are dis-

played.

Start countdown.

While the time is elapsing:

Interrupt counter.

§Next§

Scroll through the various

displays.

Let counter continue

running.

§Reset§

Reset counter to starting

time.

Sync. setting

The following settings can be made

prior to synchronisation:

Sync. profile

You can choose between 5 profiles.

Select profile.

Activate profile.

§Edit§

Set profile

108

Extras

Server sett.

Providers

Last sync:

Time of the last synchronisation.

Display the current service

provider.

Sync. mode

• Sync data: Modified data or All data

Homepage:

Port:

e.g. www.siemens-

mobile.com/syncml

• Sync direction: Two-way, Mobile

update or Server update

Enter port number.

e.g. 80.

Date range

Select On/off

Enter user name (login

name).

Enter the time in weeks in which

entries (past and future) are to be

synchronised.

Password:

Enter password (shown as

a series of asterisks).

Sync items:

Highlight database areas to be

synchronised:

Calendar

path

Contacts

path

Notes path

Task path

e.g., events

e.g., contacts

Calendar

Addressbook

Notes

e.g., tasks

e.g., notes

HTTP

authenti-

fica.:

Confirmation required;

Yes/No (if No, the input

fields are not visible).

Tasks

Save settings.

HTTP name:

Enter name.

HTTP

password:

Enter password.

Media player

109

Media player

When you are viewing a pic-

ture/video or listening to a melody,

the application starts a media play-

back.

Melodies/video

The media playback offers the fol-

lowing functions for melody and

video playback:

Browse to the next media

file.

Play or pause, depending

on the situation.

0 ^–9_{Switch on display illumi-}

Set volume.

§Stop§

nation.

Switch to mute.

Pictures

The following functions can be

applied to a displayed picture:

Stop function.

End playback.

Zoom function if the dis-

played picture has a

Options

§Options§ Open menu.

higherresolutionthan the

display. The two soft keys

(+/–) enlarge/reduce the

picture. The joystick

Different functions are offered

depending on the starting situation

and the object.

moves the picture detail.

Volume

5 Centre the picture.

Set the volume with the

joystick.

Switch to full screen

Set as...

Set picture, e.g., as Wall-

mode and back again.

paper, Logo and sounds

e.g., for Incoming call,

Startup melody.

§Send§

E.g. send via MMS or

e-mail.

Slideshow

Edit

Automatic run-through in

full screen mode. Change

individual picture with joy-

stick.

Access to picture editing.

(For standard functions see p. 15)

110

My stuff

To organise your files, you can use

the file system like a PC file manager.

There are separate folders for the

various data types in My stuff.

My stuff options

§Options§ Open menu.

Move

Copy

Paste

Place highlighted file(s)

or folder in temporary

memory.

C ¢N

The list of the folders and files is dis-

played.

Place highlighted file(s)

or folder in temporary

memory.

Navigation

Select a file/folder in lists.

Transfer content of tem-

porary memory into cur-

rent folder.

The cursor can be moved

in the preview.

New folder

Thumb. view

Attributes

Create a new folder and

name it.

Open folder or start file

with related application.

Switch over to miniature

view.

The application for the folder cur-

rently selected is loaded.

Display information on

file or folder selected.

(For standard functions see p. 15)

The WAP browser is started and the

download page displayed.

My stuff

111

Depending on the service provider, the

structure, content and functionality of

My stuff may vary.

Index structure

Separate folders have already been

created for different data types in

My stuff. These folders cannot be

changed.

Folder

Description

Format

bmp

bmx

Pictures

jpg/jpeg

png

gif

Videos

3gp

Videos

Anima-

tions

bmx

gif

Switch animations

on/off

Sounds

mid

amr

wav

sdt

Melodies

Themes

Loaded theme

(zipped)

stc

Theme configura-

tion (unzipped)

Skins

scs

Loaded user inter-

faces

Games

jar

Java archive

jad

Download info

Applica-

tions

Applications

Misc

tmo

Text modules

vmo

Voice recordings

112

Mobile Phone Manager

The Windows® PC program, Mobile

Phone Manager, allows you to use

extended phone functions from your

PC. Amongst other things, you can

easily update the phone’s Address-

book, read, save and send SMS and

MMS messages, or synchronise your

phone with Outlook®. The phone

and PC communicate via a data cable

(See Accessories, p. 121).

SMS and MMS management

(messages)

You can create MMS and SMSmes-

sages conveniently using your PC.

This means you can use all the

options your PC offers, and use your

sounds and pictures to create MMS

and EMS messages. You can read,

forward, print, delete and archive

your messages.

You can download the software

from the Internet:

Backup and restore

www.siemens-mobile.com/m65

Contacts management

You can use the backup function to

save backup copies of your phone

data regularly to your PC. If you

should lose the data you have in

your phone or change your phone

you can quickly re-instate all the data

using the restore function.

You can use contacts management

to manage the personal contacts you

have stored in your phone, to add

new ones and to delete and edit

them. You can compare and copy

contacts between your phone, Out-

look® and other Siemens phones

(including Gigaset).

Mobile Phone Manager

113

Bookmark management

(browser & bookmarks)

Processing pictures and photos

(images)

Use your PC for WAP surfing and to

define your preferred WAP sites.

Save the WAP addresses as book-

marks on your phone so that you can

quickly call them up at a later time

when you are on the move.

Picture/photo processing offers the

user the opportunity to conveniently

create, edit and manage pictures

and photos. Filters and effects are

offered to help create colourful,

attractive graphics. The user-friendly

user interface makes child’s play of

transferring pictures/photos from or

into the mobile phone, and of

Phone explorer

changing the graphic settings.

Ringtone and MP3 management

(sound)

You can use the phone explorer to

read your phone’s file system.

Pictures, sounds and much more can

easily be copied between the phone

and PC by dragging and dropping.

The sound module offers the user

the opportunity to conveniently

manage just about all sound formats

and store them on the phone. It also

supports MP3 play lists and the con-

figuration of your ringtones.

GPRS modem

The GPRSmodem establishes an

Internet connection via your mobile

phone so that you can surf the Inter-

net on your laptop while on the

move and at the touch of a button.

114

Questions & Answers

If you have any questions on the use of your phone, you can contact us at

www.siemens-mobile.com/customercare around the clock. As further help we have

listed below some frequently asked questions and answers.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least 2 seconds.

Flat battery.

Charge battery. Check charging indicator in the dis-

play.

Battery contacts dirty.

Clean contacts.

See also below under “Charging

error”.

Standby time is too Frequent use of organiser and Restrict use if possible.

short.

games.

Fast search activated.

Display illumination on.

Deactivate speed search(p. 92).

Switch off display illumination (p. 77).

Unintentional keystrokes (illumi- Activate key lock (p. 89).

nation!).

Charging error

(charge icon not dis-

played).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +40 °C.

Make sure the ambient temperature is right, wait for

a while, then recharge.

Contact problem

Check power supply and connection to the phone.

Check battery contacts and telephone connection

socket, clean them if necessary, then insert battery

again.

No mains voltage.

Use different mains power socket, check mains

voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

SIM error.

SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9).

Dirty SIM card contacts.

SIM card with wrong voltage.

Clean SIM card with a dry cloth.

Use 3V SIM cards only.

SIM card damaged (e.g. bro-

ken).

Carry out a visual check. Change SIM card at serv-

ice provider.

Questions & Answers

Possible solution

115

Problem

Possible causes

No network connec- Weak signal.

tion.

Move higher, to a window or an open space.

Check service provider's coverage area.

Complain to the service provider.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Try manual selection or select a different network

(p. 91).

Network call barring is set.

Network overloaded.

Signal too weak.

Check network barrings (p. 90).

Try again later.

Phone loses net-

work.

Reconnection to another service provider is auto-

matic (p. 91). Switching phone off and on again can

speed this up.

Calls not possible. Second line set.

New SIM card inserted.

Set first line \ (p. 92).

Check for new barrings.

Reset limit with PIN2 (p. 39)

Load credit.

Charge limit reached.

Credit used up.

Specific uses of

phone not possible.

Call restrictions are in place.

Barrings can be set by service provider. Check bar-

rings (p. 90).

Impossible to make Phonebook/Addressbook is full. Delete entries in Addressbook/Phonebook (see

entries in Phone-

book/Addressbook.

Standard functions, p. 15).

Voice message not Call divert to mailbox not set.

functioning.

Set call divert to mailbox (p. 60).

flashes to indi- SMS memory is full.

Delete SMS messages (see Standard functions,

p. 15) or archive them (p. 46).

cate an SMS.

flashes to indi- MMS memory is full.

Delete MMS messages (see Standard functions,

p. 15).

cate an MMS.

flashes to indi- Phone memory full.

Delete messages, pictures, videos, games or appli-

cations.

cate an MMS.

Function cannot be Not supported by service pro- Contact your service provider.

set. vider or registration required.

Capacity problems Phone memory full.

with, for example,

Delete files in the relevant areas. To delete specific

files you can use the delete assistant (p. 83).

Games & More, ring-

tones, pictures, vid-

eos, SMS archive.

No WAP access,

downloading not

possible.

Profile not activated, profile set- Activate or set WAP profile (p. 69). If necessary ask

tings wrong/incomplete. your service provider.

116

Questions & Answers

Possible causes

Problem

Possible solution

Text message can- Service provider does not sup- Contact your service provider.

not be sent.

port this service.

The service centre phone

number has not been set or has

been set incorrectly.

Set service centre (p. 47).

SIM card contract does not sup- Contact your service provider.

port this service.

Service centre too busy.

Repeat message.

Recipient does not have a com- Check.

patible phone.

EMS pictures &

Destination phone does not sup-

sounds are not dis- port the EMS standard.

played at the desti-

nation phone.

No Internet access Incorrect WAP profile set, or

Check WAP settings (p. 69) contact your service

possible.

wrong or incomplete settings. provider if necessary.

PIN error/

PIN2 error.

Three wrong entries.

Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If the PUK

(MASTER PIN) has been lost, contact your service

provider.

Phone code error. Three wrong entries.

Contact Siemens Service (p. 117).

Service provider

Code error.

No authorisation for this service. Contact your service provider.

Too few/too many

menu entries.

Functions may have been

added or deleted by the service

provider via the SIM card.

Check with your service provider.

No fax possible.

Wrong settings in the PC.

Check settings (p. 88).

No authorisation for this service. Contact your service provider.

Charge meter does Charge pulse is not transmitted. Contact your service provider.

not work.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Reset settings to the factory default, p. 84: # 9 9 9 9 #

Customer Care

117

Customer Care

We offer fast, individual advice! You have several options:

Our online support on the Internet:

www.siemens-mobile.com/customercare

We can be reached any time, any place. You are given 24 hour support on all aspects of our

products. Here you will find an interactive fault-finding system, a compilation of the most fre-

quently asked questions and answers, plus user guides and current software updates to

download.

You will also find the most frequently asked questions and answers in the section entitled

Questions & Answers in this user guide.

You can also get personal advice about our range of products on our Premium Hotline:

United Kingdom: 0906 9597500 (£ 0.75 per minute)

When calling customer service, please have ready your receipt and the phone identity

number (IMEI, to display press # 0 6 #), the software version (to display, press # 0 6 #,

then §Info§) and if available, your Siemens Service customer number.

Qualified Siemens employees are waiting to offer you expert information about our products

and installation. In some countries repair and replace services are impossible where the

products are not sold through our authorised dealers.

If repair work is necessary, please contact one of our service centres:

Abu Dhabi.........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brazil............................................0 80 07 07 12 48

Brunei ..................................................02 43 08 01

Bulgaria................................................02 73 94 88

Cambodia ............................................12 80 05 00

Canada ........................................1 88 87 77 02 11

China ...........................................0 21 38 98 47 77

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ..............................................35 25 86 00

Dubai ................................................0 43 96 64 33

Egypt.................................................0 23 33 41 11

Estonia................................................ 06 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany......................................0 18 05 33 32 26

Greece.........................................0 80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy ................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 52 74 20 10

118

Customer Care

Luxembourg........................................ 43 84 33 99

Macedonia ...........................................02 13 14 84

Malaysia....................................+ 6 03 77 12 43 04

Malta.......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 27 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 04 60 00

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 80 95 50

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 65 79 71 00

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Vietnam...........................................84 89 30 01 21

Zimbabwe ............................................04 36 94 24

Care and maintenance

119

Care and maintenance

Your phone has been designed and

crafted with great care and attention

and should also be treated with care.

The suggestions below will help you

to enjoy your phone for many years.

• Do not use harsh chemicals, clean-

ing solvents, or strong detergents

to clean the phone!

• The phone has better protection

against splashes, dust and knocks

if the supplied seals and the metal

bracket are used as indicated in

the assembly instructions (p. 10).

• Protect your phone from moisture

and humidity! Precipitation,

humidity and liquids contain min-

erals that will corrode electronic

circuits. Should your phone none-

theless become wet, disconnect it

immediately from any power sup-

ply, remove the battery and leave

the open phone to dry at room

temperature!

The suggestions given above apply

equally to your phone, battery,

charger and all accessories. If any of

these parts are not working properly,

take them to your nearest qualified

service outlet. The personnel there

will assist you and, if necessary,

repair the device.

• Do not use or store the phone in

dusty, dirty areas. Its moving parts

may become damaged.

• Do not store your phone in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries and

warp or melt certain plastics.

• Do not store your phone in cold

areas. When the phone warms up

again (to its normal ambient tem-

perature), moisture can form

inside the phone, which may dam-

age electronic components.

• Do not drop, knock or shake your

phone. Rough handling can dam-

age components inside the

device!

120

Product data

Phone ID

Product data

You will need the following details if you

lose your phone or SIM card:

the number of the SIM card (on the card):

..............................................................

15-digit serial number of the phone

(under the battery):

..............................................................

the customer service number of the service

provider:

..............................................................

Declaration of conformity

Siemens Information and Communi-

cation mobile hereby declares that

the phone described in this user

guide is in compliance with the

essential requirements and other rel-

evant provisions of European Direc-

tive 1999/5/EC (R&TTE). The declara-

tion of conformity (DoC) concerned

has been signed. Please call the com-

pany hotline if you require a copy of

the original, or:

Lost phone

If you lose your phone or SIM card contact

your service provider immediately to pre-

vent misuse.

www.siemens-mobile.com/conformity

Operating times

Technical data

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

GSM class:

Frequency range: 880–960 MHz

GSM class: 1 (1 watt)

Frequency range: 1,710–1,880 MHz

GSM class: 1 (1 watt)

Frequency range: 1,850–1,990 MHz

4 (2 watt)

Talktime: 100 to 330 minutes

Standby time: 60 to 300 hours

Action taken Time Reduction of stand-

(min) by time by

Weight:

Size:

105 g

109 × 49 × 19 mm

(89 ccm)

Calling

Light *

30–90 minutes

40 minutes

Li-Ion battery:

750 mAh

Network

5–10 minutes

Operating temper- –10 °C to +55 °C

ature:

* Keypad input, games, organiser etc.

SIM card:

3.0 V

Accessories

121

Accessories

Fashion & Carry

Handsfree Portable

Carrying Cases

Headset PTT HHS-510

Headset PTT HHS-610

Headset with PTT key to accept and end

calls.

A range of carry cases is available at spe-

cialist shops or you can visit the Siemens

Mobile Store online:

Original Siemens Accessories

Office

Data Cable DCA-500

www.siemens-mobile.com/

shop

For connecting the phone to the serial

RS232 port of the PC.

Energy

Li-Ion Battery (750 mAh) EBA-660

Spare battery

Data Cable USB DCA-540

For connecting the phone to the USB port of

the PC. With charging function.

Travel Charger

SyncStation DSC-600

Travel Charger ETC-500 (EU)

Travel Charger ETC-510 (UK)

Travel charger with an extended input

voltage range of 100 –240 V.

Table support for the phone to facilitate

simultaneous data exchange and phone

charging. Contains a desktop stand and a

USB data cable.

Multitainment

Car Charger Plus ECC-600

Charger for the cigarette lighter socket in

the car. It is possible to make phone calls

during charging.

Plug-in Flash IFL-600

Plug-in flash module for taking photos in

areas with low ambient light.

Bike-o-Meter IBS-600

The Bike-o-Meter is protected against

bumps and splashes and acts both as a

phone cradle on the bike and as a powerful

bike computer.

122

Accessories

Car Solutions

Mobile Holder HMH-680

Cradle without antenna port.

Mobile Holder HMH-685

The cradle for connecting an external

antenna. Ideal for use with headset PTT or

car kit portable.

Can also be used as cradle for retrofitting

your handsfree car kit (series 55).

Car Kit Comfort HKC-680

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Includes all

components needed for installation. The

individual antenna solution is available in

specialist shops.

Car Kit Easy HKP-600

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and flexible microphone positioning,

the telephone can be optimally adjusted to

suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

Optional Car Kit accessories

Car Data Adapter HKO-690

Phone-in Adapter HKO-570

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Original Siemens Accessories

www.siemens-mobile.com/

shop

Quality

123

Quality

Battery quality

declaration

Display quality

declaration

The capacity of your mobile phone

battery is reduced each time you

charge/discharge it. Storing the bat-

tery at temperatures that are too

high or too low also causes a gradual

loss of capacity. This can signifi-

cantly reduce the operating times of

your mobile phone, even after it has

been fully charged.

For technological reasons, a few

small dots with different colours

may appear in the display in excep-

tional cases.

Please note that the appearance of

brighter or darker dots generally

does not mean that a fault has

occurred.

The battery is, however, designed to

be capable of being charged and dis-

charged for a period of six months

from when the mobile phone was

purchased. Following this six-month

period, we recommend replacing

your battery if you experience a sig-

nificant drop in performance. Only

purchase original Siemens batteries.

124

Guarantee certificate (UK)

Without prejudice to any claim the

user (customer) may have in relation

to the dealer or retailer, the cus-

tomer shall be granted a manufac-

turer's Guarantee under the condi-

tions set out below:

any software supplied on a sepa-

rate data medium shall be

excluded from the Guarantee.

• The purchase receipt, together

with the date of purchase, shall be

required as evidence for invoking

the Guarantee. Claims under the

Guarantee must be submitted

within two months of the Guaran-

tee default becoming evident.

• In the case of new devices and

their components exhibiting

defects resulting from manufac-

turing and/or material faults

within 24 months of purchase,

Siemens shall, at its own option

and free of charge, either replace

the device with another device

reflecting the current state of the

art, or repair the said device. In

respect of parts subject to wear

and tear (including but not lim-

ited to, batteries, keypads, cas-

ings, small parts on casings, pro-

tective coverings where included

in the scope of delivery), this war-

ranty shall be valid for six months

from the date of purchase.

• Ownership of devices or compo-

nents replaced by and returned to

Siemens shall vest in Siemens.

• This Guarantee shall apply to new

devices purchased in the Euro-

pean Union. For Products sold in

the United Kingdom the Guaran-

tee is issued by Siemens plc,

Siemens House, Oldbury, Brack-

nell, Berkshire, RG12 8FZ.

• Any other claims resulting out of

or in connection with the device

shall be excluded from this Guar-

antee. Nothing in this Guarantee

shall attempt to limit or exclude a

Customers Statutory Rights, nor

the manufacturer's liability for

death or personal injury resulting

from its negligence.

• This Guarantee shall be invalid if

the device defect is attributable to

improper treatment and/or failure

to comply with information con-

tained in the user manuals.

•

This Guarantee shall not apply to

or extend to services performed

by the authorised dealer or the

customer themselves (e.g. instal-

lation, configuration, software

downloads). User manuals and

• The duration of the Guarantee

shall not be extended by services

rendered under the terms of the

Guarantee.

Guarantee certificate (UK)

125

• Insofar as no Guarantee default

exists, Siemens reserves the right

to charge the customer for

replacement or repair.

• The above provisions does not

imply a change in the burden of

proof to the detriment of the cus-

tomer.

To invoke this Guarantee, please

contact the Siemens telephone serv-

ice. The relevant number is to be

found in the accompanying user

guide.

126

Guarantee certificate (IRL)

Without prejudice to any claim the

user (customer) may have in relation

to the dealer or retailer, the cus-

tomer shall be granted a manufac-

turer’s Guarantee under the condi-

tions set out below:

• Components on the printed circuit

board are manipulated

• The software is manipulated

• Defects or damage caused by

dropping, breaking, lightning or

ingress of moisture. This also

applies if defects or damage was

caused by mechanical, chemical,

radio interference or thermal fac-

tors (e.g.: microwave, sauna etc.)

• In the case of new devices and

their components exhibiting

defects resulting from manufac-

turing and/or material faults

within 24 months of purchase,

Siemens shall, at its own option

and free of charge, either replace

the device with another device

reflecting the current state of the

art, or repair the said device. In

respect of parts subject to wear

and tear (including but not lim-

ited to, batteries, keypads, cas-

ings, small parts on casings, pro-

tective coverings where included

in the scope of delivery), this war-

ranty shall be valid for six months

from the date of purchase.

• Devices fitted with accessories not

authorised by Siemens

• This Guarantee shall not apply to

or extend to services performed

by the authorised dealer or the

customer themselves (e.g. instal-

lation, configuration, software

downloads). User manuals and

any software supplied on a sepa-

rate data medium shall be

excluded from the Guarantee.

• The purchase receipt, together

with the date of purchase, shall be

required as evidence for invoking

the Guarantee. Claims under the

Guarantee must be submitted

within two months of the Guaran-

tee default becoming evident.

• This Guarantee shall be invalid if

the device defect is attributable to

improper care or use and/or fail-

ure to comply with information

contained in the user manuals.

In particular claims under the

Guarantee cannot be made if:

• Ownership of devices or compo-

nents replaced by and returned to

Siemens shall vest in Siemens.

• The device is opened (this is

classed as third party interven-

tion)

• This Guarantee shall apply to new

devices purchased in the Euro-

pean Union. For Products sold in

the Republic of Ireland the Guar-

• Repairs or other work done by per-

sons not authorised by Siemens.

Guarantee certificate (IRL)

127

antee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandy-

ford Industrial Estate, Dublin 18 –

The Republic of Ireland.

• Any other claims resulting out of

or in connection with the device

shall be excluded from this Guar-

antee. Nothing in this Guarantee

shall attempt to limit or exclude a

Customers Statutory Rights, nor

the manufacturer’s liability for

death or personal injury resulting

from its negligence.

• The duration of the Guarantee

shall not be extended by services

rendered under the terms of the

Guarantee.

• Insofar as no Guarantee default

exists, Siemens reserves the right

to charge the customer for

replacement or repair.

• The above provisions does not

imply a change in the burden of

proof to the detriment of the cus-

tomer.

To invoke this Guarantee, please

contact the Siemens helpdesk on

1850 777 277. This number is also to

be found in the accompanying user

guide.

128

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

EN 50360. The SAR of mobile

phones is determined in accordance

with the European Norm EN 50361.

This involves measuring the maxi-

mum value in all frequency bands of

the mobile phone with the phone

transmitting at its highest power

level. The actual SAR level of the

phone during normal operation may

be well below the maximum value.

This is because the phone is

THIS MOBILE PHONE MEETS THE

LIMITS SET BY THE EU (1999/519/EC)

FOR PROTECTION OF THE HEALTH

OF THE PUBLIC FROM THE EFFECTS

OF EXPOSURE TO ELECTROMAGNETIC

FIELDS

These limits are part of comprehen-

sive recommendations for the pro-

tection of the public. The recom-

mendations were developed and

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific

studies*. The limits include a sub-

stantial safety margin designed

to assure the safety of all persons,

regardless of age and health.

designed to operate at multiple

power levels so as to use only the

power required to reach the net-

work. In general, the closer you are

to a base station, the lower the

power output.

The highest SAR value for this phone

model when tested for compliance

against the standard was

Before a radio equipment may be

placed on the market, compliance

with the European laws and the

respective technical limit require-

ments must be demonstrated. Only

then the CE mark may be affixed**.

The limit for mobile phones recom-

mended by the Council of the

European Union employs a unit of

measurement known as the Specific

Absorption Rate, or SAR. This SAR

limit is 2.0 W/kg***. This corre-

sponds with the requirements of the

International Commission for Non-

Ionizing Radiation Protection ICNIRP

and was adopted into the European

Norm for Mobile Radio Equipment

0.88 W/kg****.

You can also find the SAR value for

this device on the Internet at this

address www.siemens-mobile.com

While there may be differences

between the SAR levels of various

phones and at various positions, all

Siemens products meet the legal

requirements.

* The World Health Organization

(WHO, CH-1211 Geneva 27, Switzer-

land) states that present scientific

information does not indicate the

need for any special precautions for

use of mobile phones.

SAR – European Union (RTTE)

129

Further information:

www.who.int/peh-emf, www.mmfai.org,

www.siemens-mobile.com

** The CE mark confirms that the

product is in compliance with the

legal requirements of the European

Union as a prerequisite for the plac-

ing on the market and the free

movement of goods within the Euro-

pean internal market.

*** averaged over 10 g body tissue.

**** SAR values may vary depend-

ing on national requirements and

frequency bands. SAR information

for different regions can be found at

www.siemens-mobile.com

130

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

power level. The actual SAR level of

the phone during operation can be

well below the maximum value. This

is because the phone is designed to

operate at multiple power levels so

as to use only the power required to

reach the network. In general, the

closer you are to a base station, the

lower the power output.

THIS MOBILE PHONE MEETS THE

LIMITS FOR PROTECTION OF THE

HEALTH OF THE PUBLIC FROM THE

EFFECTS OF EXPOSURE TO ELECTRO-

MAGNETIC FIELDS

Your mobile phone is a radio trans-

mitter and receiver. It is designed

and manufactured not to exceed

the limits for exposure to radio fre-

quency (RF) energy recommended

by international guidelines from the

International Commission on Non-

Ionizing Radiation Protection

(ICNIRP). These limits are part of

comprehensive guidelines for the

protection of the public and estab-

lish permitted levels of RF energy for

the population. The guidelines were

confirmed by independent scientific

organisations through periodic and

thorough evaluation of scientific

studies*. The limits include a sub-

stantial safety margin designed

to assure the safety of all persons,

regardless of age and health.

The highest SAR value for this model

phone when tested for use at the ear

0.88 W/kg***.

SAR information can also be found

at www.siemens-mobile.com

While there may be differences

between the SAR levels of various

phones and at various positions,

they all meet the international

guidelines for safe RF exposure.

* The World Health Organization

(WHO, CH-1211 Geneva 27, Switzer-

land) states that present scientific

information does not indicate the

need for any special precautions for

use of mobile phones.

Further information:

The exposure limit for mobile

www.who.int/peh-emf, www.mmfai.org,

www.siemens-mobile.com

phones employs a unit of measure-

ment known as the Specific Absorp-

tion Rate, or SAR. The SAR limit

statedin theinternationalguidelines

is 2.0 W/kg**. Tests for SAR are con-

ducted in all frequency bands using

standard operating positions with

the phone transmitting at its highest

** averaged over 10 g of tissue.

*** SAR values may vary depending

on national requirements and

frequency bands. information for

different regions can be found at

www.siemens-mobile.com

Menu tree

131

Menu tree

Show entries

Business card

Groups

Addressbook/

Phonebook

Default book

Call records

Calls missed

Calls received

Calls dialled

Delete records

Time/charge

All calls

All incom.calls

All outgoing

Remain. units

Charge sett.

Currency

Personal rate

Surf & fun

URL/service provider

Games

Charge limit

Auto display

Applications

Downl. assis.

Bookmarks

Internet

Camera

SMS

Messages

Write message

Inst. message

MMS

E-mail

132

Menu tree

Messages

Inbox

SMS

MMS

E-mail

WAP push

Retr. e-mail

Send/rec. mail

CB services

Draft

SMS

MMS

E-mail

Unsent

SMS

MMS

E-mail

Retr. e-mail

Send/rec. mail

Sentbox

SMS

MMS

E-mail

MMS templates

SMS archive

Text modules

Message setup

Text zoom

SMS

SMS profiles

SMS signature

MMS

MMS profile:

User settings

Help

Menu tree

133

Messages

Organiser

Message setup

E-mail

Accounts

General sett.

WAP push set.

Voice message

CB services

Help

Receive CB

Topic list

Calendar

Appointments

Tasks

CB languages

Notes

Missed appts.

Dictating mac

Time zones

Calend. setup

Extras

SIM services

Alarm clock

Sound recorder

Calc.

Unit converter

Stopwatch

Countdown

Remote sync.

My stuff

Setup

Profiles

Themes

Display

Language

Text input

Wallpaper

Logo

T9 preferred

Input language

Colour skin

Screensaver

Start up anim.

Shutdn anim.

134

Menu tree

Setup

Display

Own greeting

Big letters

Illumination

Dynamic light

Ringtones

Ringer setting

Silent alert

Volume

Incoming call

Messages

Alarm clock

Organiser

System

Applications

d Calls

Group calls

Other calls

More melodies

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

Call setup

Hide ID

Call waiting

Divert

All calls

Call screening

Any key answ.

Minute beep

Not reachable

No reply

Busy

Receiving fax

Receiving data

Status check

Clear all

Menu tree

135

Setup

Phone setup

Key tones

Info tones

Automatic switch off

Phone identity

Memory assis.

File system

Format

Master reset

Clean up

Clock

Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time zone

Connectivity

GPRS

GPRS info

IrDA

Data services

HTTP profile

Authentication

Fax/data

Send voice/fax

Rec. voice/fax

Rec fax/data

Security

Auto key lock

Direct call

Only ‚

Codes

PIN control

This SIM only

Change PIN

Change PIN2

Chg.phonecode

136

Menu tree

Setup

Security

Barrings

All outgoing

Outgo internat

Out.int.x.home

All incoming

When roaming

Status check

Clear all

Network

Line

Select line

Protected

Network info

Choose netwrk

Auto network

Pref. network

Band selection

Fast search

User group

Active

Select group

All outgoing

Pref. group

Accessories

Car Kit

Auto answer

Automatic switch off

Car loudspk.

Key assignm.

Headset

Auto answer

Index

137

Index

Business card ..............................3 0

Busy number...............................2 5

Accessories............................... 121

Addressbook

Dial entry................................ 33

Groups ................................... 34

New entry............................... 31

Read entry .............................. 33

Aircraft mode ............................. 74

Alarm

Alarm clock........................... 103

Type ....................................... 99

Alarm clock .............................. 103

All calls (diversion) ..................... 82

All incoming (barrings) ............... 90

Answering service (external)....... 60

Any to answer ............................ 82

Appointments ............................ 98

Authentication ........................... 88

Auto display

Clock ...................................... 85

Duration/charges .................... 39

Auto key lock.............................. 89

Auto time zone................... 85, 102

Auto. network selection.............. 91

Auto. redial ................................ 25

Automobile accessories ............ 122

Calculator .................................1 05

Calendar .....................................9 7

Call

Ac cept/end..............................2 6

Barrin g ....................................9 0

Charges...................................3 9

Conference .............................2 7

Divert......................................8 1

End.........................................2 4

Hold........................................2 6

Menu......................................2 8

Reject......................................2 6

Swap (change )........................2 6

Call back .....................................2 5

Call divert ...................................8 1

Call screening .............................8 2

Call trans fer ................................2 8

Call wai ting........................... 27, 81

Calling ........................................2 4

Calls dialled (call record) .............38

Calls received (call record)...........3 8

Camer a .......................................4 0

Car Kit

Accessories ...........................1 22

Se ttin g ....................................9 3

Car kit accessorie s .....................1 22

Care of phon e ...........................1 19

Cell Broadcast (CB )......................6 7

Central inbox ..............................4 2

Charge rate.................................3 9

Charges ......................................3 9

Charging the battery ...................11

Clock ..........................................85

Colour skin..................................76

Band selectio n ............................ 92

Battery

Charge.................................... 11

Insert........................................ 9

Operating times.............. 11, 120

Quality declaration................ 123

Big letter s ................................... 77

Bookmarks (WAP) ................. 68, 70

Browser...................................... 68

Buddh. year................................ 85

138

Index

Conference................................. 27

Connection profiles .................... 87

Connectivity ............................... 86

Contact lis t ................................. 62

Control code (DTMF) .................. 29

Converte r ................................. 105

Countdown .............................. 107

Credit limit ................................. 39

CSD settings ............................... 87

Currency converte r ................... 106

Customer Care Siemen s ............ 117

Fast a ccess..................................9 5

Fast se arch..................................9 2

Fax/data mod e ............................8 8

Flash rhythms .............................7 8

Formatting (phone memory).......8 4

Formatting (SMS text).................43

Forwardi ng (call).........................2 8

Frequency rang e .........................9 2

Games and applications ........ 71, 72

GPRS...........................................86

Groups........................................3 4

Guaran tee certificate ................1 24

Date format................................ 85

Default book .............................. 30

Delete assistant .......................... 83

Dialling code .............................. 24

Dialling with number keys .......... 24

Dictating machine .................... 101

Digital Rights Management......... 13

Direct call ................................... 28

Direct reply (SMS)....................... 47

Display

Hand set volume..........................2 4

Hand sfree talking........................2 6

Headset

Accessories ...........................1 21

Se ttin g ....................................9 3

Hide ID .......................................8 1

Highli ghting mod e ......................1 6

Hold call ............................... 26, 28

Home n etwor k ............................9 1

Hotline .....................................117

Hotlin e Siemens........................1 17

HTTP profile ................................8 7

Illuminatio n ............................ 77

Language ............................... 76

Symbols.................................... 7

Divert......................................... 81

Download .................................. 71

DTMF tones (tone sequences)..... 29

Duration/charges........................ 39

Dynamic ligh t ............................. 78

Identity number (IMEI )................8 3

IMEI numbe r ...............................8 3

Info ton es ...................................8 3

Information services (CB) ............6 7

Infrared ......................................8 6

Input language (T9) ....................2 0

Inst. message..............................6 1

International dialling code...........25

Internet ......................................68

IrDA (infrared).............................86

E-mail

Lists........................................ 58

Receive/read ........................... 58

Setting s .................................. 59

Write ...................................... 57

Emergency number .................... 12

Extras....................................... 103

Index

139

My menu ....................................94

My phone ...................................23

My stuf f ....................................1 10

Joystick ........................................ 5

Key tones ................................... 83

Network

Barrin g ....................................9 0

Connection .............................91

Se ttings ..................................9 1

Notes........................................1 00

Language ........................... 76, 133

Limit (call time/charge)............... 39

Logo........................................... 76

Loss of phone, SIM car d ............ 120

One nu mber onl y ........................2 8

Only ‚ .....................................8 9

Operating times (battery).... 11, 120

Organiser....................................97

Own (p hone) numbers................3 7

Own greetin g..............................7 7

Mailbox...................................... 60

Maintenance of phone.............. 119

Master reset ............................... 84

Media player ............................ 109

Controls.................................. 14

My men u ................................ 94

Speed dialling......................... 17

Menu speed dialling ................... 16

Menu tree ................................ 131

Message

CB .......................................... 67

E-mail ..................................... 57

MMS....................................... 49

SMS.................................. 43, 45

Message memory full. ................ 48

Message type ............................. 47

Microphone on/off................ 28, 41

Minute beep............................... 82

Missed appointments ............... 100

Missed calls (call record )............. 38

MMS

Phone code.................................1 7

Phone data ...............................1 20

Phone identity number (IMEI)......83

Phone number memo .................2 5

Phone number transmission

on/off......................................8 1

Phon e setup................................8 3

Phon ebook

Call an entry............................3 6

Ne w entr y ...............................3 5

Protec ted SIM..........................3 7

Special books ..........................3 7

VIP numbers............................37

Photo..........................................4 0

Pictures & sounds (SMS)..............4 4

Change ...................................1 7

Control....................................1 7

Enter.......................................12

Error .....................................116

PIN2 ...........................................17

Lists........................................ 54

Receiv e ................................... 53

Send....................................... 52

Write ...................................... 49

Mobile Phone Manager............. 112

Muting (microphone) ........... 28, 41

140

Index

Preferred network....................... 91

Preventing accidental activation ...1 8

Product data............................. 120

Profiles

MMS....................................... 55

Phone..................................... 73

SMS........................................ 47

WAP ....................................... 69

Prompt....................................... 25

Provider log o .............................. 76

PUK, PUK2.................................. 17

Silent alert ..................................7 9

SIM card

Clear barring ...........................1 8

Insert ........................................9

Prob lems...............................1 14

SIM servic es (optional) ..............1 03

SMS

Archive ...................................4 6

Lists ........................................4 6

Profiles....................................4 7

Read .......................................4 5

Setup ......................................4 7

Signature ................................4 7

T9 input ..................................2 0

To group .................................4 4

Write.......................................4 3

SM S push....................................4 2

Software v ersio n .........................8 3

SOS ............................................1 2

Sound.......................................1 04

Sound recorder .........................1 04

Speci al book s ..............................3 7

Speci al characters .......................1 9

Speech time (battery) ...............1 20

Speed diall ing keys......................9 6

Stan dard functions......................1 5

Standby mode ............................1 4

Standby time ...................... 11, 120

Start up animation ......................7 7

Stop watch ................................1 06

Storage location (Phonebook) .....35

Surf & fun ...................................6 8

Swap ..........................................2 6

Switch off phone

Questions & Answers................ 114

Records ...................................... 38

Redial......................................... 24

Reminder ................................... 25

Remote synchronisation ........... 107

Ringtone setting......................... 79

Ringtone s ............................. 34, 79

Rubber gasket (battery cover) ....... 9

Safety precautions........................ 3

Screensaver................................ 76

Second phone number ............... 91

Security...................................... 17

Security codes ............................ 17

Service centre (SMS)................... 47

Service supplier portal ................ 23

Service tone s .............................. 83

Set time/date.............................. 85

Setup ......................................... 73

Short message (SMS).................. 43

Shown in the display .................... 7

Shut down animation ................. 77

Siemens City Portal..................... 23

Siemens service phone numbers..117

Signal strength........................... 13

Au tomati c ...............................8 3

Manually.................................1 2

Switch on phone.........................12

Symbols........................................7

Synchronisation ........................107

Index

141

T9 text entry............................... 20

Tasks.......................................... 99

Technical data .......................... 120

Text entry

With T9................................... 20

Without T9 ............................. 19

Text modules.............................. 22

This SIM only.............................. 89

Time zone s ....................12, 85, 102

Topics ........................................ 75

Unanswered............................... 81

Unit converter .......................... 105

Upper and lowercase letters

(T9) ........................................ 19

User group ................................. 92

Validity, SMS .............................. 47

Video mode................................ 41

Voice message (mailbox )............ 60

Volume

Handset volume...................... 24

Profiles ................................... 73

Ringtone................................. 79

Wallpaper (display)..................... 76

WAP ........................................... 68

TRENDnet Computer Accessories TK 210K User Manual
Sun Microsystems Sun Management Center 35 User Manual
Sony SDX 450V User Manual
Sony BW RS101 User Manual
Seagate ST3300831ACE User Manual
Seagate MOMENTUS ST160LT007 User Manual
Seagate BARRACUDA 720010 SERIAL ATA ST3250410AS User Manual
Samsung SCH R850 Series User Manual
Samsung Cell Phone SCH R810C User Manual
Nokia 8910i User Manual