TRENDnet Computer Accessories TK 210K User Manual

Quick Installation Guide  
TK-210K  
1. Before You Start  
Package Contents  
TK-210  
2 Sets of KVM Cables  
2 Sets of USB Cables  
2 Sets of Audio Cables  
Stand  
System Requirements  
VGA or SVGA Compatible Monitor  
Microphone and Speaker (optional)  
Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux, or Mac OS  
Application  
PC 2  
Cables  
Speakers  
Microphone  
PC 1  
Cables  
2-Port USB and PS/2  
KVM Switch with Audio  
(TK-210K)  
LCD Monitor  
Printer  
Keyboard  
Scanner  
Mouse  
1
English  
2. How to Install  
1. Turn off both computers and their  
peripherals, and disconnect all  
power cords.  
2. Connect the USB device (optional),  
microphone (optional) and speaker  
(optional) into the KVM switch.  
3. Connect the shared PS/2  
keyboard, monitor, and PS/2  
mouse into the KVM Switch's  
console port .  
4. Use the provided KVM and audio  
cables to connect your PC to the  
KVM Switch.  
5. Turn ON the first computer and  
wait until startup completes.  
PC 1  
2
English  
6. Press the face panel button on the  
KVM Switch to select the second  
computer.  
7. Turn ON the second computer and  
wait until startup completes.  
PC 2  
Your installation is now complete.  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet  
3
English  
3. Operation  
Note: For PC switching, you can use the face-panel buttons of the KVM Switch,  
or a hot-key command sequence via keyboard.  
Face-Panel Buttons  
Press the corresponding face-panel  
button to select your PC or USB  
devices.  
Hot-Key Command Sequence  
A keyboard hot key command consists of three keystrokes:  
Hot Key command = ScrLk + ScrLk + Command key(s)  
After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again.  
If you do not press a key within 2 seconds, the switch will exit hot-key mode.  
4
English  
Note:  
1. Hot key command works on top row numbers keys only.  
2. A PS/2 Keyboard is required for proper hot key function. If you use a USB  
keyboard, hotkey feature is disabled.  
3. When the binding of PC, USB Hub & Audio/Mic port switching is enabled by  
the hotkey sequence, any PC, USB Hub and Audio/Mic switching are bound  
together.  
4. For non-PnP OS (Linux, Windows NT4.0), please use the following  
commands to reset the mouse setting.  
ScrLk  
ScrLk  
ScrLk  
M
M
M
1
2
3
ScrLk  
ScrLk  
ScrLk  
2-key mouse setting:  
+
+
+
+
+
+
+
+
+
3-key wheel mouse setting:  
5-key wheel mouse setting:  
5
English  
Quick Reference Sheet for TK-210  
Front-Panel  
Buttons  
Hot-Keys  
Description  
Command  
Select the active PC channel x  
(selects both PC & Hub port,  
if “binding” is enabled)  
Press the PC button  
to toggle the PC  
channel  
ScrLk  
+
ScrLk  
+
X
Select PC  
(x is a top-row number key)  
x = 1 ~ 2 for PC channel number  
Select the active USB hub port  
(select both PC & Hub port, if  
“binding” is enabled)  
Press the USB button  
toggle the USB Hub  
port  
ScrLk  
ScrLk  
FX  
+
(Fx is a function key) Fx = F1 ~ F2  
+
Select Hub Port  
Enable the binding of PC &  
Hub port switching. (Once  
this feature is enabled, any  
PC and/or Hub port switching  
is bound together)  
Bind PC & Hub Port  
Switching  
ScrLk  
ScrLk  
- - -  
Z
X
+
+
Disable the binding of PC &  
Hub port switching.  
(Factory default)  
UnBind PC & Hub  
Port Switching  
ScrLk  
ScrLk  
ScrLk  
ScrLk  
- - -  
- - -  
+
+
+
+
Select the next lower  
connected channel. (select  
both PC and Hub port, if  
“binding” is enabled)  
Next lower channel  
(Arrow up)  
Select the next higher  
connected channel. (select  
both PC and USB Hub port,  
if “binding” is enabled)  
ScrLk  
ScrLk  
+
+
Next higher channel  
Beep Sound On/Off  
- - -  
- - -  
(Arrow down)  
Toggle on/off the beep sound  
for Hot-Keys and port switching  
confirmation  
ScrLk  
ScrLk  
ScrLk  
ScrLk  
B
+
+
+
+
Autoscan through each  
connected channel to browse  
each channel (delay = 10 \  
seconds).  
S
- - -  
Autoscan  
Press any key on keyboard  
Stop Autoscan  
Press any button.  
Terminate Autoscan.  
6
English  
Troubleshooting  
Q1: Where is the power supply? I did not find one in the box.  
A1: The TK-210K does not require a power supply. It draws power from your computer's  
USB connection. As long as your KVM switch is connected to the USB or PS/2 port, it will  
receive the necessary power to function.  
Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work.  
A2: Please make sure your USB port is working properly by testing it with your other USB  
devices. Once you confirm that the USB port is functional, please reboot your computers,  
and try to use the KVM switch again.  
Q3: I have the KVM switch connected properly, but my microphone and speakers don't  
work.  
A3: First, make sure your sound card is properly installed on your computers. Second, make  
sure your speakers and microphone work properly when connected directly to your  
computer. Third, make sure your speakers and microphone are connected in correct jack on  
the KVM switch. Make sure the audio cables are connected to the correct jack on your  
computer.  
Q4: Can I connect and disconnect the USB cables while the computers are turned on?  
A4: Yes, you can connect or disconnect the USB cables while the computers are turned on  
because the USB interface is Plug-and-Play and Hot-Pluggable.  
Q5: Will the KVM switch remember the keyboard settings between computers?  
A5: Yes, the KVM switch will remember the keyboard settings when switching between your  
computers. (i.e.: Cap lock, Num key, etc.)  
Q6: How do I switch from one computer to another with the KVM switch?  
A6: PC User: Push Buttons, Hot-Key Commands  
Mac User: Push Buttons  
Linux User: Universal Hot-Key Commands  
If you still encounter problems or have any questions regarding the TK-210K, please contact  
TRENDnet's Technical Support Department.  
7
Limited Warranty  
TRENDnet warrants its products against defects in material and workmanship, under  
normal use and service, for the following lengths of time from the date of purchase.  
TK-210 - 2-Year Warranty  
If a product does not operate as warranted above during the applicable warranty period,  
TRENDnet shall, at its option and expense, repair the defective product or deliver to  
customer an equivalent product to replace the defective item. All products that are  
replaced will become the property of TRENDnet. Replacement products may be new or  
reconditioned.  
TRENDnet shall not be responsible for any software, firmware, information, or memory  
data of customer contained in, stored on, or integrated with any products returned to  
TRENDnet pursuant to any warranty.  
There are no user serviceable parts inside the product. Do not remove or attempt to  
service the product through any unauthorized service center. This warranty is voided if  
(i) the product has been modified or repaired by any unauthorized service center, (ii) the  
product was subject to accident, abuse, or improper use (iii) the product was subject to  
conditions more severe than those specified in the manual.  
Warranty service may be obtained by contacting TRENDnet office within the applicable  
warranty period for a Return Material Authorization (RMA) number, accompanied by a  
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-  
authorized by TRENDnet with RMA number marked on the outside of the package, and  
sent prepaid, insured and packaged appropriately for safe shipment.  
8
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE  
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT  
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING  
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER  
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF  
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET  
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT  
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.  
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND  
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES  
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S  
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED  
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE  
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER  
HAZARD.  
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET  
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER  
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,  
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,  
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF  
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN  
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,  
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH  
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND  
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF  
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED  
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.  
Governing Law: This Limited Warranty shall be governed by the laws of the state of  
California.  
Note: AC/DC Power Adapter, Cooling Fan, Power Supply, and Cables carry a 1-Year  
Warranty  
9
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de  
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al  
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador  
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria  
existente en el pais o zona de instalación.  
TRENDnet Technical Support  
.
US Canada  
Toll Free Telephone: 1(866) 845-3673  
24/7 Tech Support  
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)  
Toll Free Telephone: +00800 60 76 76 67  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Worldwide  
Telephone: +(31) (0) 20 504 05 35  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Product Warranty Registration  
Please take a moment to register your product online.  
20675 Manhattan Place  
Torrance, CA 90501  
USA  
Copyright ©2007. All Rights Reserved. TRENDnet.  

Sony MD Walkman MZ R700 User Manual
Sony CD Walkman D EJ01 User Manual
SIIG ZH User Manual
Seagate BARRACUDA ATA FAMILY ST313620A User Manual
Samsung SGH T219 User Manual
Philips Docking Entertainment System DC6210 User Manual
Philips AQ6542 User Manual
Panasonic SL SW891C User Manual
Nokia WINGBEE LITE N97 User Manual
Nokia MOBILE PHONES 9352596 User Manual