3000Cla-IM1-2-en.bk Seite 1 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000ClaU.fm
05.01.00
Gigaset
ꢀ
30 0 0
Classic
Operating Instructions
and Safety Precautions
8ꢀ
3000Cla-IM1-2-en.bk Seite 3 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000ClaU.fm
05.01.00
Quick reference guide
Function
Key combination
Activate/deactivate
the handset
Hold down € for 1 second
Hold down } for 1 second
D
Activate/deactivate
keypad protection
Answer a call
Make an external call P D
Redial a number
1 or a D
Save a speed dial num- z - e.g. s b P
ber
b €
Dial a speed dial num-
- a or e.g. · D
ber
Dial a number from
z s a D
the call list
Set the handset
z ¸ ¨ b e.g. s b
volume
Mute the microphone
{ Microphone muted;
4 Microphone on
Make an internal call { e.g. ·
Call all handsets
{ ~
Transfer call
(connect)
{ e.g. s €ꢁ
Internal enquiry call
{ e.g. s;
Terminate enquiry call: 4
3
8ꢂ
3000Cla-IM1-2-en.bk Seite 4 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000ClaU.fm
05.01.00
Safety precautions
• Never use ordinary (non-rechargeab
• le) batteries. Only use approved batteries of the same
type (rechargeable), as otherwise battery damage can re-
sult (dangerous), see table page 7.
• The handset’s battery compartments feature the following
diagrams:
g Insert rechargeable batteries correctly in
accordance with polarity symbols.
h Operate battery type in accordance with these
operating instructions.
• Do not use non-Siemens charging devices, as this could
damage the batteries.
• Batteries heat up during charging – this is a normal occur-
rence and is not dangerous.
• The handset can affect medical equipment.
• The handset can cause unpleasant humming in hearing
aids.
• Do not operate the handset in environments where there
is risk of explosion, such as a paint shop.
• Always include the operating instructions when passing
your handset onto third parties.
• The batteries and handset should be disposed of in an
environmentally-friendly manner.
Displays
Pause
1
_
J
ꢀ
Base station icon
ꢀ
Blank
Charging status icon
¥
Star key ~
Pound key }
Recall key 4
New message to
answering machine
Mailbox function:
New number in
the caller list
ª
P
Off hook
C
(;7ꢀ
,17ꢀ
External connection
Internal connection
Handset locked
ˆ
1GJ
Telephone PIN input
£
____ Keypad protection
4
8ꢃ
3000Cla-IM1-2-en.bk Seite 5 Mittwoch, 5. Januar 2000 3:31 15
3000ClaIVZ.fm
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19
05.01.00
Contents
Brief overview................................................................... 2
Display keys......................................................................2
Quick reference guide ...................................................... 3
Safety precautions............................................................ 4
Displays.............................................................................. 4
Preparing the handset...................................................... 6
Inserting the batteries.......................................................6
Charging the batteries ......................................................7
Attaching the belt clip.......................................................8
Activating/deactivating the handset..................................8
Activating/deactivating keypad protection ........................8
Registering the handset................................................... 9
Making calls .................................................................... 10
Making an external call ...................................................10
Making an internal call ....................................................10
Answering a call..............................................................10
Transferring a call, enquiry call........................................11
Redial ............................................................................... 11
Speed dialling ................................................................. 12
Saving/changing/deleting call numbers...........................12
Speed dialling..................................................................12
Deleting the speed dial list .............................................13
Call-by-call support......................................................... 13
Security............................................................................ 14
Changing the telephone PIN...........................................14
Activating direct station selection...................................14
Activating the handset lock.............................................15
Deactivating the handset lock/direct station selection....15
Settings............................................................................ 16
Ringer volume.................................................................16
Ring tones.......................................................................16
Handset volume..............................................................16
Activating/deactivating beeps.........................................17
Activating/deactivating base station display....................17
Activating/deactivating auto talk .....................................18
Resetting the factory settings.........................................18
Changing the base station ..............................................19
Switching to tone dialling................................................19
Appendix ......................................................................... 20
5
3000Cla-IM1-2-en.bk Seite 6 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Preparing the handset
Contents of the package
Gigaset 3000 Classic handset, 2 batteries, belt clip,
operating instructions.
Inserting the batteries
• Never use ordinary (non-rechargeable) batteries.
Only use approved batteries of the same type
(rechargeable), as otherwise battery damage can
result (dangerous), see table page 7.
• The handset’s battery compartments feature the
following diagrams:
g Insert rechargeable batteries correctly in
accordance with polarity symbols.
h Operate battery type in accordance with
these operating instructions.
• Do not use non-Siemens charging devices, as
this could damage the batteries.
• Please dispose of old, defective batteries in an
environmentally friendly manner in accordance
with the relevant legislation.
• Insert the batteries, ensuring correct polarity – see figu-
re on left.
• Insert the battery cover approx. 3 mm into the battery
compartment and slide it upwards until it clicks into pla-
ce.
• To open the battery cover, press the grooved area on the
cover and slide downwards.
6
3000Cla-IM1-2-en.bk Seite 7 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Charging the batteries
The batteries supplied are not charged.
To charge the batteries, insert the handset in the base sta-
tion or Gigaset 3000L charging unit (accessory) – you will
hear the confirmation beep. The charging status icon flashes
on the handset display to indicate that a charging operation
is in progress:
Batteries empty
Batteries 2/3 charged
Batteries full
§
¦
¥
¤
Batteries 1/ charged
3
– We recommend initially charging the batteries for at least
16 hours without interruption – irrespective of the
charging status icon.
– Once the first charging operation is complete, you can
replace the handset in the base station after every call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
– The batteries heat up during charging.
– The battery charging status is only displayed correctly
after uninterrupted charging/discharging. You should
therefore avoid opening the battery compartment unne-
cessarily.
Approved batteries:
Nickel-cadmium (NiCd)
Nickel-metal-hydride (NiMH)
Sanyo N-3U (700 mAh)
GP GP60AAKC (600 mAh)
Varta 751RS (700 mAh)
Sanyo H-3 U (1500 mAh)
GP GP130 AA HC (1300 mAh)
GP GP150 AA HC (1500 mAh)
Mobile Power 700 (700 mAh) Varta VH 1101 or Phone Power
(1100 mAh)
Panasonic 60 DT (600 mAh)
Panasonic HHR-110 AA (1100 mAh)
Friwo NiMH (1400 mAh)
Toshiba TH-1200 AARE (1200 mAh)
Always replace both batteries and only use batteries of the
same type/from the same manufacturer.
7
3000Cla-IM1-2-en.bk Seite 8 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Handset operating time/charging time:
Charging
time
(hours)
Capacity
(mAh)
Standby time
(hours)
Talk time
(hours)
700
1100
1500
up to 100
up to 160
up to 220
over 10
over 15
over 20
approx. 5
approx. 9
approx. 12
Attaching the belt clip
Press the belt clip against the back of the handset until the
side protrusions click into place in the holes provided.
Activating/deactivating the handset
€
Press the end call key for 1 second.
The handset automatically activates as soon as you insert
the batteries and place it in the base station/charging unit.
Activating/deactivating keypad protection
When keypad protection is activated, the keypad buttons are
ineffective.
Calls can be accepted with the talk key D
.
}
Hold key down for more than
1 second to activate/deactivate keypad pro-
tection.
8
3000Cla-IM1-2-en.bk Seite 9 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Registering the handset
You must register your handset at the base station before
you can start to make calls.
Step 1
• First prepare the Siemens base station for registration:
Gigaset
Base station preparation
3010/pocket Hold down the coloured base station key for
3015
approx. 10 seconds until you hear signal
tones.
3020, 3025
3030, 3035
In the base station menu select registration
option and confirm.
ISDN
models
Press the display (LED) –
flashing during registration.
1000/2000
models
As for relevant successor model.
Step 2
• You now have one minute to enter the following at the
handset:
z { ~ Press the keys shown.
¸ꢁb
Enter the base station number, e.g. ¸ (sta-
tion 1-4) and confirm.
System PIN b Enter the base station’s system PIN and con-
firm (factory setting: 0000) – the unassigned
call numbers appear after a few seconds.
e.g. s
Enter the desired call number – the statio-
nary base icon ꢀ is displayed.
Your handset is ready for operation!
– Please refer to the relevant operating instructions (step 1)
to register at non-Siemens base stations.
– You can register your Gigaset 3000 Classic handset at
up to 4 different base stations, see above.
9
3000Cla-IM1-2-en.bk Seite 10 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Making calls
Making an external call
P
Enter the call number.
|If ne. cessary, correct it with the delete key
Press the talk key to start the dial operation.
D
Ending a call:
€
Press the end call key
.
– You can cancel the dial operation with the end call key
€
.
– You can insert a pause with the recall key 4 (hold it
down).
– You can opt to not save entries, e.g. when checking an
account: press the keys z ~, all characters entered af-
terwards are not saved for number redial.
Making an internal call
{
Press the INT key – the actual internal call
number is displayed.
P
Enter the internal call number.
Press ~ to call all handsets.
Ending a call:
Press the end call key
€
.
Answering a call
D
or
Press the talk key.
remove the handset from the base station/
charging unit if the auto talk feature is activa-
ted.
L
’
10
3000Cla-IM1-2-en.bk Seite 11 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Transferring a call, enquiry call
Siemens base stations allow you to transfer an external
call to another handset or to conduct an internal enquiry call.
{
P
Press the INT key.
Dial the internal call number.
When the user answers:
• transfer the call: press the end call key €.
• enquiry call: press the recall key 4 to revert to the cal-
ler on hold.
Redial
Redialling a number
You can access the last five call numbers dialled.
1
a
Display call numbers.
Select a call number.
If necessary, confirm the number with
and correct it with the delete key |.
ꢁ
b
D
Press the talk key to start the redial opera-
tion.
Deleting redial numbers
All five redial numbers are deleted.
z
Press the set key.
¸ y b Initiate the setting.
Tel. PIN b
Enter the telephone PIN and confirm
(factory setting: 0000).
s b€ Delete the redial list.
11
3000Cla-IM1-2-en.bk Seite 12 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Speed dialling
The speed dialling function allows you to dial up to 10 call
numbers at the push of a button.
Saving/changing/deleting call numbers
z -
Press the set key followed by the speed dial
key.
e.g. ¸
Enter the speed dial number (memory loca-
tion, digit 0 to 9) or press a to scroll.
b
P
Confirm the number.
Enter a new call number or delete/change an
existing call number with |.
b€
Save the number.
Speed dialling
-
e.g. ¸
Display the call numbers.
Enter the speed dial number (0 to 9) or
press a to scroll.
If necessary, confirm the number with b
and dial further digits for the extension num-
ber.
D
Press the talk key to start the dial operation.
Saving a call number from the redial list
z -
Press the set key followed by the speed dial
key.
e.g. ·b
Enter the speed dial number (digit 0 to 9) or
press a to scroll and confirm.
a
Select the call number (scroll) – the other
redial numbers are displayed.
bꢁ€
Save the call number.
12
3000Cla-IM1-2-en.bk Seite 13 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Deleting the speed dial list
All call numbers saved are deleted!
z
Press the set key.
¸ y b
Activate the function.
b
Tel. PIN
Enter the telephone PIN and confirm
(factory setting: 0000).
¸ bꢁ
€
Delete the speed dial list.
Call-by-call support
• Using the speed dial key
Hold down the speed dial key - to display the tele-
phone company’s call number saved as speed dial num-
ber "0".
-
Hold down the speed dial key – the prefix
code is displayed.
PꢁD
Enter the user’s call number and press the
talk key to dial the "complete" number.
• By "linking" the speed dial list
You can save a number of prefix codes for various tele-
phone companies as speed dial numbers:
-ꢁaꢁb
Display the prefix code and confirm.
e.g.
Display the user’s call number in the speed
dial list and confirm or enter it manually.
-ꢁaꢁb
D
Press the talk key to dial the complete num-
ber.
13
3000Cla-IM1-2-en.bk Seite 14 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Security
Changing the telephone PIN
Important functions/settings are protected by the handset’s
telephone PIN (Personal Identification Number).
Do not forget your telephone PIN! The PIN can only be
reset by calling the Siemens hotline, see back cover.
z
Press the set key.
¸ s b Activate the function.
Tel. PIN b
Enter the current telephone PIN and
confirm (factory setting: 0000).
2x new
tel. PIN
Enter the new telephone PIN (4 digits)
twice.
b€
Save the new telephone PIN.
Activating direct station selection
This function is not available in all countries!
When direct station selection (DSS) is active, every key-
stroke triggers a call to the DSS number saved. This
function is used to call for help or raise an alarm.
Saving/changing/deleting a DSS number:
z
Press the set key.
¸ ¸
b
Select the function.
Tel. PIN b
Enter the telephone PIN and confirm
(factory settings: 0000).
s
P
b
Press the keys shown.
Enter or change the DSS number or press
| to delete it.
b
Save the DSS number – direct station selec-
tion is activated.
The telephone lock is activated if you press b when the _
(empty) icon is displayed.
14
3000Cla-IM1-2-en.bk Seite 15 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Activating the handset lock
All functions with the exception of emergency call are una-
vailable when the telephone is locked. You can still be rea-
ched, however. Simply press the talk key D to accept a
call.
z
Press the set key.
¸ ¸ b Select the function.
Tel. PIN b
Enter the telephone PIN and confirm
(factory setting: 0000).
¸ b
Activate the telephone lock.
You can dial all base station emergency numbers.
Deactivating the handset lock/direct station
selection
z
Press the set key.
¸ ¸
b
Activate the function.
Tel. PIN b
Enter the telephone PIN and confirm
(factory setting: 0000).
¨
bꢁ€ Deactivate direct station selection/telephone
lock.
15
3000Cla-IM1-2-en.bk Seite 16 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Settings
Ringer volume
You can choose between 5 volumes and the "crescendo"
ring (increasing volume).
v
z v
e.g. u
b
Activate the function – you will hear the rin-
ger.
Change the ringer volume (level 1 to 5,
crescendo = 6).
Save the setting.
†
Ring tones
You can choose between 10 ring tones.
z †
Activate the function – you will hear the rin-
ger.
e.g. ·
b
Select the ring tones (0 to 9).
Save the setting.
Handset volume
You can set the handset volume to any of 3 levels (even
during a call).
z
Press the set key.
¸ ¨
b
Activate the function.
Change the volume (1, 2 or 3).
Save the setting.
e.g. s
bꢁ€
16
3000Cla-IM1-2-en.bk Seite 17 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Activating/deactivating beeps
• Confirmation beeps – function code 13 (both beeps)
– Confirmation beep (1 beep) when you conclude a
function and replace the unit in the charging unit
– Error beep (4 short beeps) when you make an incorrect
entry
• Key beep – function code 14
– every keystroke is confirmed
• Battery warning beep – function code 15
– when the battery is empty
z
Press the set key.
e.g.
For example, enter function code 14 and
confirm.
¸ ub
e.g. ¨
For example, deactivate the key beep.
Deactivate = 0; activate = 1
You can also activate the battery warning
beep for call status only = enter s.
b€
Save the entry.
Activating/deactivating base station display
The current base station is displayed when the handset is
idle.
z
Press the set key.
¸ † b
Activate the function.
e.g. ¸
For example, activate the display.
Activate = 1; deactivate = 0
b€
Save the setting.
17
3000Cla-IM1-2-en.bk Seite 18 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Activating/deactivating auto talk
When this function is active, you can answer a call by remo-
ving the handset from the base station or charging unit.
z
Press the set key.
¸ x b
Activate the function.
e.g. ¨
Enter ¨ to deactivate auto talk.
Enter ¸ to activate auto talk.
b€
Save the setting.
Resetting the factory settings
This setting does not delete the telephone PIN. Base sta-
tion registrations are maintained.
Factor settings:
Speed dial numbers, redial, DSS number
Handset volume, ringer melody
Ringer volume
deleted
1
5
Key beep, battery warning beep, confirma- on
tion beeps, auto talk
Base station display
off
z
¸ y b
Press the set key.
Activate the function.
b
Tel. PIN
Enter the telephone PIN and confirm
(factory default: 0000).
¨ b€
Reset settings to factory default.
18
3000Cla-IM1-2-en.bk Seite 19 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Changing the base station
Prerequisite: the handset is registered with more than one
base station.
You can choose one of the following settings:
• Set the handset to automatically select (factory setting)
the best base (factory setting).
• Set the handset to priority base station – the handset
searches for other base stations if this is not found within
30 seconds.
• Set the handset to a fixed base station.
z {
Press the set key followed by the INT key.
e.g. ¸¸ꢁ For example, set base 1 as the priority base.
For automatic selection: enter ¨.
For priority base: enter the base number
twice.
For fixed base: enter the base number
once.
b€
Save the setting and terminate the function.
Switching to tone dialling
If you are operating the base station in a telephone system
that uses pulse dialling (DP), you can switch to tone dialling
(DTMF), e.g. for telephone banking, to check an external
answering machine, etc.
Prerequisite: a connection is active.
z
~
Press the set key.
Activate tone dialling – tone dialling is active
until the call is cleared down.
19
3000Cla-IM1-2-en.bk Seite 20 Mittwoch, 5. Januar 2000 3:31 15
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-2-6Z19 3000Cla.fm
05.01.00
Appendix
Range
The range is approximately 300 metres outdoors and up to
50 metres indoors. The base icon ꢀ flashes when you move
outside this range.
Guarantee/service
Siemens AG offers a six-month guarantee for this device
from the date of purchase from the dealer. Within this
period, Siemens AG will rectify all material or manufacturing
defects by repairing or replacing the defective terminal.
The guarantee shall not cover damage caused by improper
use, wear and tear or third party access. The guarantee shall
not cover consumables or defects which only slightly
decrease the value or serviceability of the device.
Service telephone number (see back cover).
Siemens Service should only be contacted if problems arise
with the unit. Your specialist dealer will be happy to answer
any questions on unit operation. Contact your network pro-
vider for questions concerning telephone connections.
Approval
The Gigaset 3000 Classic has received approval for opera-
tion throughout the EU.
20
|