Spine
Outside Left
Outside Right
S C H - a 2 2 0 U s e r G u i d e
SAMSUNG Telecommunications America (STA), Inc.
1601 E. Plano Parkway, Suite 150
Plano, TX 75074
Toll Free 1-888-987-HELP (4357) FAX 1-972-761-7501
Internet Address: http://www.samsung.ca
Printed in South Korea
GH68-03478A / Rev 1.0
Portable Dual ModeTelephone
SCH-A220 Series
Portable Dual Mode
Telephone
User’s Guide
Please read this manual before operating your phone, and
keep it for future reference.
A220_LM_012703
Intellectual Property
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the “Phone System”), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify,
prepare derivative works of, reverse engineer,
decompile, disassemble, or otherwise attempt to create
source code from the software. No title to or ownership
in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall
remain with SAMSUNG and its suppliers.
2
Samsung Telecommunications America (STA), Inc.
Headquarters:
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsung.ca
©2003 Samsung Telecommunications America, Inc. All
rights reserved. No reproduction in whole or in part
allowed without prior written approval. Samsung
Telecommunications America, Inc. is a trademark of
Samsung Electronics Corporation, Ltd.
Licensed by Qualcomm Incorporated under one or
more of the following patents: U.S. Patent No. 4, 901,
307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459;
5, 107, 225; 5, 109, 390.
Printed in South Korea
3
®
Openwave is a registered Trademark of Openwave,
Inc.
®
RSA is a registered Trademark RSA Security, Inc.
4
Table of Contents
5
6
7
8
9
10
11
12
Making and Answering a Call
Outgoing
To make a call using your keypad:
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while
dialing, press
and hold
to erase one digit at a time. Press
to erase the entire number.)
3. Press
. (To make calls when you are roaming and
Call Guard is enabled, press to acknowledge roaming
rates.
4. When you’re finished, press
or close the flip.
Incoming
1. Make sure your phone is on. If your phone is off,
incoming calls go to voicemail.
2. When a call comes in, answer the call by pressing
Depending on your settings, your phone notifies you of
incoming calls in the following ways:
.
• The phone rings or vibrates.
• The LED flashes.
• The backlight illuminates.
• The screen displays an incoming call message.
• If available, the phone number of the caller is displayed.
• If the phone number is in your Internal Phone Book, the
Phone Book entry’s name is displayed.
• The image assigned to the entry is displayed.
The following option is also displayed.
Chapter 1 - Getting Started
14
•
to Silence Ringer.
• Depending on your settings, you may also answer incoming
calls simply by opening the phone or by pressing any digit.
(To answer a call when you are roaming and Call Guard is
enabled, you must press
to answer the call.)
or close the flip.
• To disconnect the call, press
Setting up Voicemail
All unanswered calls to your phone are sent to voicemail,
even if your phone is in use or turned off. Therefore, you will
want to set up your voicemail and personal greeting as soon
as your phone is activated.
To set up voicemail:
1. Press and hold
.
2. Follow the system prompts to setup your voicemail.
Powering Your Phone ON and OFF
Turning Your Phone ON
To turn your phone on, press
for a few seconds.
Once your phone is ON, it displays “Looking for Service”
indicating that your phone is searching for a signal. When
your phone finds a signal, it automatically enters Standby
mode – the phone’s idle state. At this point, you are ready to
begin making and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
Standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
Chapter 1 - Getting Started
15
search for service by pressing any key (when your phone is
turned ON).
Turning Your Phone OFF
Press
for a few seconds until you see the powering
down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
Menu Tree
The menu tree is an outline of all the menu’s available in your
phone. This list is meant to be used as a quick reference to
locating a desired menu function.
Menus
1: Call History
1: Outgoing Calls
2: Incoming Calls
3: Missed Calls
4: Erase History
1: Outgoing Calls
1: Yes
2: No
2: Incoming Calls
1: Yes
2: No
3: Missed Calls
1: Yes
2: No
4: All Calls
1: Yes
2: No
5: Air Time
1: Last Call
2: Total Calls
3: Erase All
Chapter 1 - Getting Started
16
1: Yes
2: No
4: Lifetime
2: PhoneBook
1: Find
2: Add New Entry
3: Group Setting
1: Family
1: Rename
2: LED
3: Ringer
2: Friends
1: Rename
2: LED
3: Ringer
3: Colleague
1: Rename
2: LED
3: Ringer
4: VIPs
1: Rename
2: LED
3: Ringer
5: No Group
1: Rename
2: LED
3: Ringer
4: My Phone #
3: Wireless Web
1: Downloads
1: Get New
2: Manage
1: Ringtones
2: Images
3: Animations
4: Multimedia
2: Start Browser
Chapter 1 - Getting Started
17
3: Web Guard
1: None
2: Both
3: To End
4: To Start
4: Connection
1: Voice Call Only
2: Fax One Time
3: Fax Only
4: Data One Time
5: Data Only
4: Message
1: New Message
2: Inbox
1: Voice
2: Text
3: Web
3: Outbox
1: Sent
2: Stored
4: Delivery
5: MSG Setup
1: General
1: Scroll Timer
1: Off
2: 1 second
3: 2 seconds
4: 3 seconds
5: 4 seconds
6: 5 seconds
2: Msg. Remind
1: Off
2: Once
3: Every 2 min
2: New Message
1: Call Back #
2: Autosave
Chapter 1 - Getting Started
18
1: On
2: Off
3: Entry Method
1: T9 Word
2: Alphabet
4: Delivery ACK
1: Yes
2: No
5: Canned Msg
1: Yes
2: No
3: Call Me
4: Need Directions
5: Where are you?
6: Will call later
7: Busy
8: On my way
9: Will arrive in 15 minutes
10: Thank you
3: Erase
1: Clear VM Count
1: Yes
2: No
2: Received
1: Page/Text
1: Yes
2: No
2: Web Alerts
1: Yes
2: No
3: Sent
1: Yes
2: No
4: Stored
1: Yes
2: No
5: All
Chapter 1 - Getting Started
19
1: Yes
2: No
5: Voice Dial
1: Record
2: Review
3: Erase All
4: Set Active
1: # key only
2: # key/Open
6: Tools
1: Today
2: Scheduler
3: Task List
4: Memo Pad
5: Alarm
1: Alarm 1
2: Alarm 2
3: Alarm 3
6: Calculator
7: World Time
8: Countdown
9: Set Time
7: Setup
1: Display
1: Menu Style
1: Nature
2: Camera
2: Wallpaper
1: Local Image
1: Aquarium
2: Snowing
3: Flower
4: Digital Clock
5: Launch Pad
2: Downloaded
3: Banner
4: Auto Hyphen
Chapter 1 - Getting Started
20
1: On
2: Off
5: Backlight
1: Open
2: 30 seconds
3: 8 seconds
4: Off
6: Service LED
1: On
2: Off
7: Contrast
8: Version
2: Sounds
1: Ringer Volume
1: Calls
1: Off
2: Vibrate
3: 1-Beep
4: Level 1 - 8
5: High+Vibrate
2: Messages
1: Off
2: Vibrate
3: 1-Beep
4: Level 1 - 8
5: High+Vibrate
3: Alarm
1: Off
2: Vibrate
3: 1-Beep
4: Level 1 - 8
5: High+Vibrate
2: Ringer Type
1: Voice Calls
1: With Caller ID
2: No Caller ID
2: Messages
Chapter 1 - Getting Started
21
1: Voicemail
2: Text
3: Web Alert
3: Data/Fax In
4: Schedule
3: Alerts
1: Minute Beep
1: On
2: Off
2: Service
1: On
2: Off
3: Connect
1: On
2: Off
4: Disconnect
1: On
2: Off
4: Roam Ringer
1: Normal
2: Distinctive
5: Key Beep
1: Off
2: Level 1-8
6: Tone Length
1: Long
2: Short
7: Power on/off
1: On
2: Off
3: Network
1: Set Mode
1: Automatic
2: Home Only
2: Set NAM
1: NAM 1
2: NAM 2
Chapter 1 - Getting Started
22
3: Call Guard
1: Yes
2: No
4: Security
1: Lock Phone
1: Unlocked
2: On Power-Up
3: Lock Now
2: Restriction
1: Restrict All
2: PBook only
3: Special #s
4: Off
3: Change Lock
4: Special #s
1: 911
2: *911
3: #911
5: Erase Pbook
1: YES
2: NO
6: Reset Phone
1: YES
2: NO
5: Others
1: Launch Pad
1: Up Key
1: PBookSearch
2: VoiceDial
3: Calculator
4: Scheduler
5: RingerType
6: Worldtime
7: Display
8: Alarm
2: Down Key
1: PBookSearch
Chapter 1 - Getting Started
23
2: VoiceDial
3: Calculator
4: Scheduler
5: RingerType
6: Worldtime
7: Display
8: Alarm
3: Right Key
1: PBookSearch
2: VoiceDial
3: Calculator
4: Scheduler
5: RingerType
6: Worldtime
7: Display
8: Alarm
4: Left Key
1: PBookSearch
2: VoiceDial
3: Calculator
4: Scheduler
5: RingerType
6: Worldtime
7: Display
8: Alarm
2: Answer Mode
1: Any Key
2: Flip Open
3: Send Key
3: Auto Answer
1: Car Kit Only - No
2: Car Kit Only - Yes
4: Language
1: English
2: Français
8: Games
1: Push Push
Chapter 1 - Getting Started
24
In-Use Menu
1: Mute
2: Calls
3: PhoneBook
4: 3-Way Call
5: Messages
6: Tools
7: Version
Chapter 1 - Getting Started
25
Chapter 1 - Getting Started
26
Chapter 2 - Getting to Know Your Phone
29
This key allows you to scroll through
the phone menu options, and provides
a shortcut to phone functions from
Standby Mode.
Enters the Mobile Web menu. Launches
the web browser when you press for a
few seconds.
The Send key answers an incoming call.
In standby mode, it launches the
Outgoing call log.
Ends a call. Press and hold this key for
a few seconds to turn your phone On or
Off. While in the main menu, it returns
the phone to standby mode and cancels
your input.
Deletes characters from the display.
When in a menu, press to return to the
previous menu. This key also allows
you to return to the previous screen in
the PCS Wireless Web browser.
The Numeric keypad allows you to enter
numbers, letters, and characters. You
can also navigate through the menu by
pressing the number that corresponds
to the menu item.
-
If you press and hold for a few seconds
in standby mode, the phone is
automatically set to Silent mode.
Chapter 2 - Getting to Know Your Phone
32
Enters the pound [#] character for
calling features. In text entry mode,
press to enter a space. If you press and
hold for a few seconds, voice dial is
launched.
Allows you to adjust the ringer volume
in standby mode (with the flip open) or
adjust the voice volume during a call.
They can also be used to scroll up or
down to navigate through the different
menu options. To mute the ringer
during an incoming call, press the
Volume Key up or down.
Viewing the Display Screen
The Main LCD screen displays the following symbols:
Icon
Description
Displays your current signal strength.The
more lines you have, the stronger your
signal.
Indicates that a call is in progress.
Indicates that your phone cannot find a
signal.
Chapter 2 - Getting to Know Your Phone
33
Indicates that an alarm is set on your phone.
Indicates you have voicemail, text, numeric
pages, or web alert messages waiting. Press
briefly to see a list of pending messages
or press and hold to dial voicemail box.
Indicates your phone is in vibrate mode.
Indicates that your phone is roaming. This
icon is displayed when you travel outside of
your normal coverage area.
Indicates your phone is in digital mode.
Displays your current battery charge
strength. (Icon shown fully charged.)
Indicates that the ringer has been turned On.
Chapter 2 - Getting to Know Your Phone
34
Chapter 2 - Getting to Know Your Phone
36
Battery Installation
Your PCS Phone is equipped with a Lithium Ion (LiIon)
battery. It allows you to recharge your battery before it
is fully drained. The battery provides approximately 2
hours of continuous digital talk time and 140 hours of
continuous digital standby time.
When the battery reaches 5% of its capacity, the
battery icon blinks. When there are approximately two
minutes of talk time left, the phone sounds an audible
alert every 30 seconds and then powers down.
Note: Long backlight settings, searching for service, vibrate
mode and browser use affect the battery’s talk and standby
times.
To attach the battery to your phone:
1. Position the battery into the slot on the back of the
phone.
Chapter 3 - Battery & Charging Devices
38
2. Gently push the top end of the battery down until you
hear it snap in place.
Removing the battery
To remove the battery from your phone:
1. Turn the phone off by pressing and holding
.
2. Push the battery release latch up and pull the battery
away from the latch.
3. Lift the battery away from the phone.
Chapter 3 - Battery & Charging Devices
39
Charging the battery
Your phone is powered by a rechargeable standard Li-
Ion battery. Only use Samsung-approved travel
adaptors and batteries. These adaptors are designed
to maximize battery life. Using other adaptors may void
your warranty and cause damage to your phone.
When the phone has finished charging it can be
disconnected.
Chapter 3 - Battery & Charging Devices
40
Desktop Charger
The desktop charger allows you to charge the phone by
placing it into the charger. You can also insert an extra
battery in the rear slot of the charger.
Travel Adapter
Use the power adapter/interface connector located on
the bottom of the phone to connect a wireless data
device or a hands-free car kit (both sold separately).
Using the Travel Adapter
The travel adaptor allows you to charge your phone’s
battery from any standard AC wall outlet. You can still
make phone calls while the battery is charging.
Follow these steps to use you travel adapter:
1. With the battery installed, attach the cord from the travel
adaptor by plugging it into the bottom of the phone.
Chapter 3 - Battery & Charging Devices
41
2. Connect the adaptor to a standard AC wall outlet. The
LED (located at the top of your phone) indicates that the
phone is charging by turning red.
3. The following LED colors indicate the charging status of
the battery:
• Red indicates that the battery is charging.
• Green indicates that the battery is fully charged.
Note: The battery charges faster when the phone is turned off.
Battery Indicator
You can tell whether or not your battery needs to be
recharged by checking the battery indicator (this icon
is located in the upper-right corner of the display
screen). The presence of all three bars indicate a full
charge. No bars (the battery icon is empty) means your
battery must be charged.
Two or three minutes before the battery charge level
gets too low to operate the phone, the battery icon
begins blinking an empty battery icon (
), and
sounds a tone. If you continue to operate the phone
without charging the battery, the phone will
automatically turn off and the call is terminated. If a
charging device is connected before the battery is fully
discharged, you can continue your call.
Chapter 3 - Battery & Charging Devices
42
Phone Modes
Your phone has several different modes of operation
that allow you to easily use your phone’s many new
features. The following modes are discussed in this
chapter:
• Standby Mode
• Talk Mode
• Power Save Mode
• Lock Mode
Standby Mode
Standby or idle mode is the mode that your phone is in
when you are not on a call or when the phone is not is
use, but powered ON. A screen saver or other display
screen may be displayed while you are in standby
mode. Press
mode.
in any menu to return to standby
Talk Mode
When you make a call, the phone is in talk mode.
Several options are available while you are connected
to another party. These options are accessed using the
In-Use Menu.
Chapter 4 - Using Your Phone
44
Power Save Mode
Your phone has a power saving mode that reduces the
amount of battery power used during certain situations.
This feature is automatically activated after 15 minutes
of searching. Once the power save mode is enabled, a
message is displayed on the screen. The signal search
is performed periodically to conserve battery power. To
manually force the phone to check for a signal, press
any of the numeric or function keys.
Lock Mode
When you lock your phone using the Lock Mode menu
option, an access code is required to use the phone.
You can receive messages and calls, but you cannot
make an outgoing call until your phone is unlocked. For
more information on locking your phone, see “Lock
Auto LCD Off
The LCD is automatically turned off after a one minute
of inactivity to conserve the battery.
Step Ringer
This feature is provided to prevent the ringer from being
too loud on the initial ring. When your phone rings, the
lowest level of the ringer volume is heard. The ringer
gradually increases to the set ringer level.
Note: Your flip must be open for this feature to work.
Chapter 4 - Using Your Phone
45
Call Functions
It may become necessary to dial emergency numbers,
re-dial a previous phone number, or use special dialing
instructions when trying to connect to an automated
service. The following call functions are available with
your phone:
• Emergency Numbers
• Speed Dialing
• Special Dialing Instructions
• Call Logs
• Airtime
Emergency Numbers
Emergency numbers can be programmed into your
phone using the Special #s menu. Up to three numbers
can be entered and saved. These three numbers can
be dialed even when the phone is locked or all outgoing
calls are restricted.
To Setup Emergency Numbers:
1. Press
2. Press
3. Press
4. Press
5. Press
.
for Setup.
for Security and enter your lock code.
for Special #s.
,
, or
to select the desired entry.
Chapter 4 - Using Your Phone
46
6. Press and hold
to erase any numbers.
7. Enter the desired number and press
to save.
To Call an Emergency Number:
1. Enter the emergency number using the numeric keypad.
2. Press
.
Speed Dialing
Speed dial entries are used by pressing one, two, or
three keys. When a new entry is saved in the
phonebook, a speed dial number is automatically
assigned. This number can be used to dial the entry
without having to access the phone book or by dialing
the phone number.
To Speed Dial locations 1-9:
1. Press and hold the appropriate key for a few seconds.
The display confirms that the number has been dialed
when it shows “Calling”.
To Speed Dial locations 10-99:
1. Press the first digit.
2. Press and hold the second digit for a few seconds. The
display confirms that the number has been dialed when it
shows “Calling”.
To Speed Dial locations 100-500:
1. Press the first digit.
2. Press the second digit.
Chapter 4 - Using Your Phone
47
3. Press and hold the third digit for a few seconds. The
display confirms that the number has been dialed when it
shows “Calling”.
Dialing Options
If you dial an automated banking system or a number
that requires you to enter a password, pauses can be
used to simulate wait times before the information is
required. By following the pauses with numbers, you
are effectively setting up your phone to dial an
automated system without having to enter the numbers
manually. Pause and other dialing options are
displayed when you enter numbers using the keypad.
The following options are displayed when you are
entering a number using the keypad:
• Send - This option dials the number on the screen.
• Save - This option saves the number to the phonebook.
• Find -Find helps locate a desired phonebook entry.
• Hard Pause - is used to insert a hard pause.
• 2sec Pause - to insert a 2-second pause.
InUse Menu
During a call, you can access the InUse menu to assist
you. The InUse menu has the following options:
• Mute - Allows you to mute the microphone so that the caller
cannot hear you.
Chapter 4 - Using Your Phone
48
• Calls - Allows you to view the call log history for Incoming,
Outgoing, and missed calls.
• PhoneBook - Allows you to access the phonebook.
• 3-Way Call - Allows you to make a three-way call. With this
option, you can speak to two different callers at the same time.
• Messages - Allows you to access the Message menu.
• Tools - Allows you to access the Tools menu.
• Version - Displays the hardware and software version of your
phone.
Prepending a Number
Prepending allows you to add additional digits to a
number already stored in the call log or address book.
This may be helpful when adding codes to connect to
an automated network or adding a area code.
To add numbers:
1. Select the desired number in the call log or your address
book.
2. With the entry displayed on the screen, press
3. Press for Prepend.
.
4. Enter the area code or desired numbers using the
numeric keypad.
5. Press
to dial.
Chapter 4 - Using Your Phone
49
Redialing Last Call
To dial the last outgoing call, press
twice. Your
phone stores the last 10 numbers in the outgoing call
log. To recall any of the numbers:
1. Press
from standby mode to display the
outgoing call log.
2. Press the navigation key left or right to cycle through the
numbers.
3. When you find the desired entry, press
to dial.
Call Logs
There are three different call logs saved in your phone.
They are:
• Missed Calls
• Incoming Calls
• Outgoing Calls
Each call log saves up to 10 entries with the call
duration. Once the limit is reached, the oldest entry is
overwritten. These logs can also be erased at any time.
Missed Calls
When a call is not answered, a missed call icon is
displayed on the screen and a new entry is written to
the missed call log. A total of 10 missed calls are
saved. To access the missed call log:
1. Press
2. Press
.
for Call History.
Chapter 4 - Using Your Phone
50
3. Press
for Missed Calls.
Note: You can also access this menu by pressing
in
Standby mode.
Incoming Calls
When a call is answered, an entry is saved in the
incoming call log. The entry contains the caller
information (if available), time, and duration of the call.
A total of 10 incoming calls are saved. Contact your
service provider to activate the Caller Line Identification
service. To access the incoming call log:
1. Press
2. Press
3. Press
.
for Call History.
for Incoming Calls.
Outgoing Calls
When you make an outgoing call, the number dialed
and name (if saved in the phonebook) are saved to the
outgoing call log. A total of 10 outgoing calls are saved.
To access the outgoing call log:
1. Press
2. Press
3. Press
.
for Call History.
for Outgoing Calls.
Chapter 4 - Using Your Phone
51
Erasing Call History
This option allows you to delete the entries stored in
each of the call logs, or to erase all entries.
To erase the entries:
1. Press
2. Press
3. Press
4. Press:
.
for Call History.
for Erase History.
•
•
•
for Outgoing Calls.
for Incoming Calls.
for Missed Calls.
•
for All Calls.
5. Press
to confirm the deletion.
Call Log Menu Options
When you are viewing the call log entries, the following
options are available by pressing
.
• Send - Dials the selected number from the call log.
• Save - Allows you to save the selected number by creating a
new phone book entry.
• Prepend - Allows you to prepend the number with a series of
digits.
Chapter 4 - Using Your Phone
52
Airtime
This option displays the number of calls to or from your
phone number with the airtime used for each call. The
airtime can be reset or erase at anytime. This feature is
helpful in estimating the total amount of phone usage.
Note: This feature is not intended for billing purposes.
The following options are available:
• Last Call - Displays the amount of call time from the last
call made.
• Total Calls - Displays the number of calls and total
duration of all calls made since the last Erase Total.
• Erase All - Erases the Total airtime measurement and
resets the calls to zero.
• Lifetime - Displays the total duration of all calls made since
the phone was shipped from the factory.
To access airtime:
rase the entries:
1. Press
2. Press
3. Press
.
for Call History.
for Airtime.
Chapter 4 - Using Your Phone
53
Chapter 4 - Using Your Phone
54
PhoneBook
The phonebook allows you to store frequently used
phone numbers. You can save up to 500 total numbers,
with each entry containing up to six different numbers.
Each number in the entry can have a unique group
associated with it, such as office, home, mobile, pager,
fax, or no label.
Internal Phonebook Options
The following options are available when you display a
phonebook entry.
• Send - This option calls the number.
• Edit - Allows you to modify the entry information.
• Prepend - Allows you to add additional numbers before the
main number saved in the entry.
• Erase - Deletes the number from the entry if there is more than
one, or the entire entry if only one number is associated.
• Send MSG - Allows you to send a text or Short Message (SMS)
to the other user’s number.
Note: For the Send MSG feature to work correctly, the other user
must have text messaging capability enabled on their phone.
Finding a number
To locate a number in the phonebook, you can use the
find feature. To find a number:
1. Press
.
Chapter 5 - PhoneBook
56
2. Press
3. Press
for PhoneBook.
for Find.
4. Press the navigation key left or right to display the
following find options:
• By Name - Allows you to search using the first few letters of
the entry’s name.
• By Entry - Allows you to search using the entry location
number.
• By Group - Allows you to search using the group associated
with the entry.
5. Enter the first letter or number of the entry your looking
for using the numeric keypad.
Note: If searching by group, use the navigation key to cycle through
the different entries. For a more detailed find, use By Name or By
Number.
6. The first entry that contains the information entered is
displayed. Use the navigation key or enter additional
information to find the desired entry.
7. When the entry is located, press
to view.
Note: You can also access Find by pressing the navigation key down
when the phone is in standby mode.
Character Input
When you enter information into the phonebook using
the numeric keypad, you have several different
character input options. They are:
Chapter 5 - PhoneBook
57
• T9 (English) - T9 uses technology to automatically create the
word you are trying to enter based on the possible matches
containing the letters entered. To cycle through the different
choices, press
.
• Alpha - This method allows you to enter letters using the
keypad. The available letters are displayed when you press the
key multiple times.
• Symbol - These are extended characters or symbols.
• Number - Allows you to enter only numbers using the keypad.
• .com - This option is only displayed when you are entering an
email or URL address. It automatically enters “.com” in the
entry.
• .net - This option is only displayed when you are entering an
email or URL address. It automatically enters “.net” in the
entry.
Using T9 (English)
T9 allows you to enter the desired word using the
keypad, without taking the time to make sure you select
the proper letter sequence. T9 gives you a word based
on the possible combinations of letters. Once the
correct amount of letters are entered for the word, it
should be displayed on the screen. If not, press
to
cycle through the possible choices.To accept a word,
press
. If you make a mistake, press
to erase
a single character. Press and hold to delete the entire
series of characters.
Chapter 5 - PhoneBook
58
Entering Alpha Characters
The alpha character input allows you to enter letters
that correspond with the keypad. By default, the first
letter of the word is capitalized followed by lowercase
letters. After a character is entered, the cursor
advances to the next space after a few seconds or
when a different key is pressed. The following
characters are displayed:
Key
Output
. , - ? ! ’ @ : 1
A B C 2
D E F 3
G H I 4
J K L 5
M N O 6
P Q R S 7
T U V 8
W X Y Z 9
Chapter 5 - PhoneBook
59
0
Space
Shift
Note: If you press and hold a key for a few seconds, it will
automatically display the number.
Symbols
To enter a symbol, select the symbol mode and press
the key that corresponds with the symbol displayed on
the screen. Press the navigation key left or right to
display additional symbols.
Adding a New Entry
To add a new entry:
1. Enter a phone number using the keypad.
2. Press
3. Press
.
for Save.
Note: If you enter less than five numbers, press
to save the
entry.
4. *Press
to enter a new name or scroll through the
phone book to select an existing name. Press
the additional number to the selected entry.
to add
5. Select a label by highlighting Home, Office, Mobile,
Pager, Fax or No Label and press
.
Chapter 5 - PhoneBook
60
6. Enter a name for entry using the numeric keys. Press
to change the entry method between T9, Alpha,
Symbol, and Number.
7. When finished entering the name, press
the phone book entry.
to return to
8. Press
9. Press
to save.
to confirm.
* : This step is not necessary on the very first entry saved into the
phone. Skip to the next step if you are entering the first entry in the
phone book.
Adding an Additional Phone Number
To add an additional phone number to an existing
phonebook entry:
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
5. Press for Edit.
6. Press the navigation key down until the desired label is
selected and press to edit.
.
7. Enter the phone number using the keypad and press
.
8. Press
9. Press
to Save.
again to Confirm.
Chapter 5 - PhoneBook
61
Editing an Existing Phone Number
To edit an existing phone number stored in the
phonebook:
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
5. Press to edit the entry.
6. Press the navigation key down until the desired phone
number is selected and press to edit.
7. Press and hold to erase the entire number or press
.
once to erase just the last number.
8. Enter the new number using the keypad and press
.
9. Press
10. Press
to Save.
again to Confirm.
Saving Phone Numbers with Pause Entries
If you would like to save a phone number in the
phonebook that contains pauses:
1. Enter the phone number using the keypad.
2. Press
and press
for Hard Pause or
for
2sec Pause.
3. Press
.
4. Press
to enter a new name.
5. Select the desired label and press
.
Chapter 5 - PhoneBook
62
6. Enter the name using the keypad.
7. Press
8. Press
to Save.
to Confirm.
Making a Call from the PhoneBook
To make a call from the phonebook:
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
.
Selecting a Ring Tone
A ring tone can be assigned to a phonebook entry to
easily identify the caller. To select the ring tone:
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
5. Press to edit the entry.
6. Press the navigation key down until Ringer is selected.
7. Press
.
.
8. Press the navigation key to the right and highlight the
desired Ringer Category.
9. Press the navigation key down.
Chapter 5 - PhoneBook
63
10. Press the navigation key to the left or right to highlight
and listen to the desired Ringer and press
.
11. Press
12. Press
to Save.
to Confirm
Secret PhoneBook Entries
Phonebook entries can be saved as Secret. Once
secret, the entry will display the name, but the phone
number is not displayed. Instead of the phone number,
the word “Secret” is displayed on the screen. A lock
code is required to edit the entry. To make an entry
secret:
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
.
5. Press to edit the entry.
6. Press the navigation key down until Secret is selected.
7. Press the navigation key left or right until On is displayed
in the Secret field and press
to Save.
8. Press again to Confirm.
Chapter 5 - PhoneBook
64
Turning Off Secret Entry
1. Press
2. Press
3. Press
.
for PhoneBook.
for Find.
4. Select the desired entry and press
5. Press to edit the entry.
6. Enter the lock code.
.
7. Press the navigation key down until Secret is selected.
8. Press the navigation key left or right until Off is displayed
in the Secret field and press
to Save.
9. Press again to Confirm.
Chapter 5 - PhoneBook
65
Chapter 5 - PhoneBook
66
Common Voice Functions
Voice Dialing
The voice dialing feature allows you to speak a name to
dial a number in your phonebook. Voice dial requires
that you train the phone to recognize your voice by
going through the voice dial menu.
Recording Voice Dial Entries
The first step in getting the Voice Dial feature correctly
set up is to record a name to associate with a number.
The name should be simple and not contain several
words. Speak in your normal voice when trying to
record the name. To record the name and setup the
entry:
1. Press
2. Press
3. Press
.
for Voice Dial.
for Record.
4. Say the name of the entry.
5. Say the name to confirm the entry.
6. Enter a phone number using the keypad to associate
with the name and press
.
Activating Voice Dial
To use voice dial, you need to designate what activates
the voice prompt. To set up the activate options:
1. Press
.
Chapter 6 - Operating Features
68
2. Press
3. Press
for Voice Dial.
for Set Active.
4. Select between the following options:
• # key only - When the phone is in standby, press and hold
to activate the voice prompt.
• # key/Open -When this option is selected, open the flip or
press and hold
.
Reviewing Voice Dial Entries
You can view the entries that are already save in the
phone. To view the save voice dial entries:
1. Press
2. Press
3. Press
.
for Voice Dial.
for Review.
4. Highlight the desired entry and press
.
5. The name recorded is played and the number associated
is displayed.
6. Press
to exit.
Deleting a Voice Dial Entry
If you want to delete an entry:
1. Press
2. Press
3. Press
.
for Voice Dial.
for Review.
4. Highlight the desired entry and press
.
Chapter 6 - Operating Features
69
Call Features
Your phone is equipped with several calling features
that allow you to perform everyday call functions easier.
The functions covered in this section are:
• Three-way Calling
• Call Waiting
• Call Forwarding
• Caller ID
Three-Way Calling
Three-way calling allows you to talk to two different
people at the same time. When using this feature,
normal airtime rates are charged for each call. When
the call is finished, each of the callers is recorded in the
outgoing call log. To activate three-way calling, please
contact your service provider.
Placing a Three-way Call
1. Enter the first number and press
2. Once connected, press
.
for Three-Way Call.
3. Enter the second number and press
.
4. Once the second caller is connected, press
to connect all three parties together.
again
Note: If one caller hangs up during your call, you and the remaining
caller stay connected. If you initiated the call and are the first to hang
up, all callers are disconnected.
Chapter 6 - Operating Features
71
Call Waiting
Call waiting allows you to answer a second call during a
conversation. Your phone notifies you of another call by
beeping and displaying “Incoming Call”. Call waiting
can be activated or deactivated. To have an
undisturbed conversation, make sure call waiting is
deactivated. Please contact your service provider to
activate the call waiting service.
Answering Call Waiting
1. When the phone beeps and displays the “Incoming Call”
message, press
and the first caller is placed on hold.
2. Press again to switch back to the first caller.
. The incoming call is answered
Call Forwarding
Call forwarding allows you to forward your calls to
another phone number, even if your phone is powered
OFF. You can continue to make calls from your phone,
even though it is forwarded to another number. To
activate call forwarding, please contact your service
provider.
Caller ID
Caller ID displays the name and number of the person
calling if they are saved in the phonebook, or just the
number if available on the LCD screen. If the number is
blocked or unlisted, a message is displayed on your
phone. To activate the caller ID service, please contact
your service provider.
Chapter 6 - Operating Features
72
Message Types
Your phone can send and receive the following types of
messages:
• Voicemails
• Text
• Numeric Pages
• Web
Messages are received even if the phone is Off or
locked. When a new message is received, a notification
is displayed and a ringer is sounded. A message icon is
also displayed on the top of the screen until the new
message is listened to or read. If a message is received
during a call, the ringer notification is muted to avoid
disturbing the call.
The Message menu can be accessed quickly by
pressing
in Standby mode.
Chapter 7 - Messaging
74
Voicemail
If a new voicemail is received, a notification screen is
displayed asking you to review the new message. If
multiple new voicemail messages are received, the last
one received is displayed in the notification screen. The
notification includes:
• Time/Date Information.
• Number of new Voicemails.
• Callback number (if available).
Connecting to the Voicemail System
To connect to voicemail:
1. Press and hold
.
Chapter 7 - Messaging
75
Text Messaging
The A220 allows you to create and send text messages
with up to 150 characters. Text messaging, also known
as SMS (Short Message Service) allows short text
messages to be received and displayed on your phone.
2-Way Text Messaging, also known as MO-SMS
(Mobile-Originated Short Message Service,) allows
messages to be sent from the phone. Messages can
also be sent to a phone using the carrier's web site.
Messages can be sent from one phone to another by
addressing the message to the recipient's phone
number.
Creating a New Message
1. Press
2. Press
3. Press
.
for Message.
for New Message.
4. Enter the phone number of the message recipient and
press
.
Note: To access a phone number from the phonebook, press
.
5. Enter message using the keypad. When finished, press
.
Note: To change the character entry mode, press
.
6. The Message Action screen is displayed with the
following options.
• SEND - Press
to send the message.
Chapter 7 - Messaging
76
• OK - Press
• CLR - Press
to store the message in the Outbox.
to edit the message.
• END - Press
to discard and quit the message menu.
Message Options
When sending a SMS message, there are several
options available. These options determine how the
message is sent. The available options are:
• Priority - The priority level determines the message priority.
The available options are Normal and Urgent.
• Validity - Validity determines the length of time a message is
stored in the message center and delivery attempts are
continued before it expires and is no longer sent. Your
options are Always, 30 min, 1 hour, 2 hours, 12 hours, 1
day, 2 days, and 3 days.
• Delivery Time - This option allows you to specify a wait time
before sending the message. The available options are Now,
30 min, 1 hour, 2 hours, 12 hours, 1 day, 2 days, and 3 days.
• Delivery Acknowledgement - This option allows you to
request a delivery acknowledgment that the message was
received by the recipient. The available options are No
request and Request Ack.
• Sent Save/No Save - This option allows you to save a copy of
a message to the sent folder in the outbox after you send a
new message. The available options are No save and Save
outbox.
To access the message options:
Chapter 7 - Messaging
77
1. Press
2. Press
3. Press
.
for Message.
for New Message.
4. Enter the phone number of the message recipient and
press
.
5. Enter message using the keypad. When finished, press
.
6. The message action screen is displayed, press
return to the message.
to
7. Press the navigation key up to highlight the Options and
press
.
Canned Messages
Canned messages are default text messages that can
be used quickly to send common text (SMS) messages
without having to type the message. A total of 10
canned messages can be saved.
Using Canned Messages
1. Press
2. Press
3. Press
.
for Message.
for New Message.
4. Enter the phone number of the message recipient and
press
.
5. Press
for Canned.
6. Use the navigation button to highlight the desired
message and press
.
Chapter 7 - Messaging
78
Editing Canned Messages
1. Press
2. Press
3. Press
4. Press
5. Press
.
for Message.
for MSG Setup.
for New Message.
for Canned Msg.
6. Use the navigation key to highlight the desired canned
message to edit.
7. Press
8. Press and hold
press and release for one character at a time.
for Edit.
to delete the entire message, or
9. Enter the new message and press
to save.
Inbox
Your phone can save up to 94 messages or 15KB total
for the Inbox/Outbox combined. The number of
messages that are stored, depends on the length of
the message. If the memory is full, a warning message
is displayed and new messages are rejected. Older
messages can be deleted to free up space for the
incoming messages. To access the Inbox:
1. Press
2. Press
3. Press
4. Press:
.
for Message.
for Inbox.
Chapter 7 - Messaging
79
•
•
- for Voice
- for Text
•
- for Web
Inbox Menu Options
The following menu options are available when you
access a message in the Inbox:
• Call back - Dials the call back number.
• Reply - Allows you to send a reply to the message sender.
• Forward - Allows you to forward the message to another
person.
• Save Addr -Allows you to save the senders phone number in
the phonebook.
• Erase - Deletes the message.
• Save cb# - Allows you to save the callback number of the
message.
Outbox
Your phone can save up to 94 messages or 15KB total
for the Inbox/Outbox combined. The number of
messages that are stored, depends on the length of the
message. If the memory is full, a warning message is
displayed and new messages are rejected.
Once the message is sent, a copy is placed in the
outbox in the Sent folder. Saved messages are also
stored in the outbox in the Stored folder. Messages can
be re-sent anytime by accessing these folders in the
outbox.
Chapter 7 - Messaging
80
Sent Folder
The Sent folder keeps a record of all the messages
sent from your phone. When you access the sent
folder, icons next to the message indicate their status.
Note: If the No Save option was not set up in the Save
Message setting in the MSG Setup screen, then you can
review, resend, or delete any message saved in the Sent
folder.
These icons are:
•
•
- Indicates that the message was sent successfully.
- Indicates that the message failed to send.
To review a message:
1. Press
2. Press
3. Press
4. Press
.
for Message.
for Outbox.
for Sent.
5. Press the navigation key down to cycle through the
messages. Press to view the message.
6. With the message displayed, press
options:
for the following
• Call - Dials the phone number.
• Re-Send - Allows you to re-send the message again, or to
someone else.
• Save Addr - Allows you to save the number or email address
in your phone book.
Chapter 7 - Messaging
81
• Erase - Deletes the message.
Stored Folder
The stored folder contains all the messages that were
not completed and saved to send at a later time. These
messages are accessed from the stored folder in the
Outbox. To access the stored folder:
1. Press
2. Press
3. Press
4. Press
.
for Message.
for Outbox.
for Stored.
5. Press the navigation key down to cycle through the
messages. Press to view the message.
6. With the message displayed, press
options:
for the following
• Call - Dials the phone number.
• Re-Send - Allows you to re-send the message again, or to
someone else.
• Save Addr - Allows you to save the number or email address
in your phone book.
• Erase - Deletes the message.
Message Ringer
A distinct ringer can be associated with an incoming
messages to alert you that a new voicemail, SMS, or
web message has arrived. Each type of message can
have a different ringer associated. To set up the desired
ringer:
Chapter 7 - Messaging
82
1. Press
2. Press
3. Press
4. Press
5. Press
6. Press:
.
for Setup.
for Sounds.
for Ringer Type.
for Messages.
•
•
•
- for Voicemail
- for Text
- for Web Alert
7. Select the desired ringer using the navigation key and
press to save.
Message Setup
Message setup allows you to configure how a message
is sent or received from your phone. The following
message setup options are available:
• General
• New Message
• Erase
General
The general settings allow you to configure the
following:
• Scroll Timer - This option allows you to set the length of time
the screen scrolls automatically when reading a message.
Chapter 7 - Messaging
83
The available options are 1-5 seconds or Off. If the option is
set to Off, you have to press the navigation key down to
scroll through the message.
• Message Remind - This option allows you to set how often
your phone alerts you that new messages are available. The
available options are Off, Once, or Every 2 minutes.
To access the General settings:
1. Press
2. Press
3. Press
4. Press
.
for Message.
for MSG Setup.
for General.
New Message
The new message settings allow you to configure the
following:
• Callback # - This option allows you to specify a callback
number for the new message. By default, your phone
number is entered.
• Autosave - Allows you to turn On or Off the ability to save a
sent message to the sent folder in the outbox.
• Entry Method - This option allows you to set the default
character entry mode between T9 and Alphabet.
• Delivery Ack - Allows you to turn On or Off the ability to
request a delivery acknowledgment.
• Canned Message - Allows you to edit or change the 10 preset
canned messages. For more information on canned
Chapter 7 - Messaging
84
Wireless Web
Your phone includes a web browser that allows you to
display mobile enabled Internet sites. Mobile enabled
websites are scaled down versions of the original to
support your phone. Typically they contain information
that is constantly updated.
Each time the web browser is started, the phone
connects to the wireless web and the service icon (
is displayed on the screen. Anytime the service
indicator is visible, you are connected to the wireless
)
web. Your browser will automatically disconnect after a
period of inactivity and reconnects if needed.
Note: You can quickly launch the browser by pressing the internet
key (
)located in the center of the navigation key.
Chapter 8 - Mobile Web
86
Accessing the Web
To access the wireless web, you need to launch the
web browser. If this is the first time the browser has
been launched, you are required to go through a
security setup procedure. Follow the on-screen
prompts to complete the process.
Launching the Browser
1. Press
2. Press
3. Press
for WirelessWeb.
for Start Browser.
Exiting the Browser
1. Press
to disconnect.
Softkeys
When you are connected to the wireless web, there is a
solid bar displayed on the bottom of the LCD screen.
The bar contains text that corresponds to navigation
key on your phone. By pressing the navigation key left
or right, you are able to navigate the web. Softkey
functions change depending on the website being
navigated.
Chapter 8 - Mobile Web
87
Navigating the Web Browser
Navigating inside the web browser is done by using the
softkeys controlled by the navigation key. Additional
keys are also assigned to common browser
functionality. The browser presents content in one of
the following ways:
• Text or Numeric
• Embedded Links
• Numbered Options
• Simple Text
Key Assignments
Key
Function
Returns the browser to the home page from
any screen.
Scrolls up and selects browser options.
Scrolls down and selects browser options.
Up
Down
Executes the softkey command located on the
left side of the web bar located at the bottom of
the screen.
Left
Executes the softkey command located on the
right side of the web bar located at the bottom
of the screen.
Right
Chapter 8 - Mobile Web
88
Opens the secondary options or a menu of
secondary options.
Used to go back one page in the browser if
pressed once. If you press and hold, it returns
you to the Home page. If entering characters, it
acts the same as the phone. If pressed once
and release, one character is deleted. If you
press and hold, all characters are deleted.
Confirms the highlighted item in the browser.
Exits the browser and returns the phone to
standby mode.
If the items on the website are numbered, these
keys can be used to quickly access the
numbered choice.
-
Allows you to scroll up or down the page and
change the volume setting.
Chapter 8 - Mobile Web
89
Web Guard
The web guard setting allows you to activate a web
prompt when entering, exiting, or to display the prompt
when doing both when using the web browser. This
prompt keeps you from accidentally logging in or out of
the web.
Activating Web Guard:
1. Press
2. Press
3. Press
for WirelessWeb.
for Web Guard.
4. Press the navigation key left or right to select:
• None - Deactivates web guard so no prompt is displayed
when entering or exiting the browser.
• Both - Activates the web guard to display a prompt when
entering and exiting the browser.
• To End - Activates the prompt only when exiting the browser.
• To Start - Activates the prompt only when entering the
browser.
5. Press
to Save.
Chapter 8 - Mobile Web
90
Web Alerts
When a new web message is received, an info alert
dialog box is displayed on the screen with the following
options:
• View - Opens the web Inbox and allows you to view the web
message.
• Clear - Press
to close the info alert dialog box and read
the message at a later time.
Chapter 8 - Mobile Web
91
Chapter 8 - Mobile Web
92
Tools Menu
The Tools menu accesses the following features:
• Today - Displays all the events for the current day.
• Scheduler - Provides full calendar access and the ability to
schedule events.
• Task List - Allows you to save a task list of important things
to do.
• Memo Pad - Allows you to save memos or reminders.
• Alarm - Allows you to set an alarm for a desired time using
the ringers or melodies saved in your phone.
• Calculator - Allows simple calculations to be performed
using the keypad.
• World Time - Displays different time zone information for
cities around the world.
• Countdown - Allows you to enter a desired length of time to
countdown and then sound an alert when reached.
• Set Time - Allows you to set the time manually on the phone.
Scheduler
The scheduler function allows you to create events and
to schedule an event alarm to sound using a standard
calendar. The calendar can be displayed in a month,
week, or day view on the display. You can view past
months or future months using the navigation key.
Scheduling A New Event
1. Press
.
2. Press
for Tools.
Chapter 9 - Tools
94
3. Press
for Scheduler.
4. Select the desired day by pressing the navigation key to
the right.
Note: To change the month, press the volume key up or down.
5. Press
for Add New.
6. Enter the event using the keypad and press
.
7. Enter the start time and date using the keypad and press
the navigation key down.
8. Enter the end time and date. Select the desired Alarm if
needed and press
to Save.
Scheduling an Event for Today
You can save up to nine events for the current day
using the Today feature. To schedule events for the
current day:
1. Press
2. Press
3. Press
.
for Tools.
for Today.
4. If there are no events scheduled, skip to the next step. If
there is already an event scheduled for the day, press
for Add New.
5. Enter the event using the keypad and press
.
6. Enter the start time and date using the keypad and press
the navigation key down.
7. Enter the end time and date. Select the desired Alarm if
needed and press
to Save.
Chapter 9 - Tools
95
Editing an Event for Today
1. Press
2. Press
3. Press
.
for Tools.
for Today.
4. Select the desired event using the navigation key and
press
.
5. Press
for Edit.
6. Edit the event name and press
.
7. Edit the start time and date and press the navigation key
down.
8. Edit the end time and date. Edit the alarm if needed and
press
to Save.
Deleting an Event for Today
1. Press
2. Press
3. Press
.
for Tools.
for Today.
4. Select the desired event and press
for Erase.
Note: To erase all events, press
.
5. Select Yes to confirm and press
.
Editing a Scheduled Event
1. Press
2. Press
3. Press
.
for Tools.
for Scheduler.
4. Select the desired event date by using the volume and
navigation keys.
Chapter 9 - Tools
96
5. Press
that date.
6. Select the desired event and press
7. Press for Edit.
8. Edit the event name and press
to view the list of scheduled events for
.
.
9. Edit the start time and date and press the navigation key
down.
10. Edit the end time and date. Edit the alarm if needed and
press
to Save.
Deleting a Scheduled Event
1. Press
2. Press
3. Press
.
for Tools.
for Scheduler.
4. Select the desired event date by using the volume and
navigation keys.
5. Press
that date.
6. Press
to view the list of scheduled events for
for Erase.
Note: To erase all events, press
.
7. Select Yes and press
to Confirm.
Chapter 9 - Tools
97
Task List
The task list allows you to create a list of items that
need to be completed by a certain date and time. Each
task can be assigned a priority level and deadline.
When a task is completed, it can be deleted.
Creating a New Task
1. Press
2. Press
3. Press
.
for Tools.
for Task List.
4. If there are no tasks already saved, skip to the next step.
If there are tasks already saved, press
New.
for Add
5. Enter the new task using the keypad and press
.
6. Enter the time and date for the deadline. Press the
navigation key down to select Priority.
7. Press the navigation key left or right to select the desired
priority level. When finished, press
to Save.
Deleting a Task
1. Press
2. Press
3. Press
.
for Tools.
for Task List.
4. Select the desired task and press and press
for
Erase.
Note: To erase all tasks, press
.
5. Select Yes and press
to Confirm.
Chapter 9 - Tools
98
Memo Pad
The memo pad allows you to save up to 10 different
memos in your phone. Memo entries can contain up to
32 characters each.
Creating a New Memo
1. Press
2. Press
3. Press
.
for Tools.
for Memo Pad.
4. If there are no memos already saved, skip to the next
step. If there are memos saved, press
New.
for Add
5. Enter the new memo using the keypad. When finished,
press
to Save.
Deleting a Memo
1. Press
2. Press
3. Press
.
for Tools.
for Memo Pad.
4. Select the desired memo and press
for Erase.
Note: To erase all memos, press
.
5. Select Yes and press
to Confirm.
Chapter 9 - Tools
99
Alarm
The alarm allows you to enter a time for the alarm to
sound. The alarm can be configured to sound only
once or daily, depending on your needs. Up to three
different alarms can be set to sound at their prescribed
times.
Setting an Alarm
1. Press
2. Press
3. Press
4. Press
.
for Tools.
for Alarm.
or
to select an alarm.
5. Press the navigation key right or left to turn the alarm
ON.
6. Press the navigation key down to enter the desired time.
7. Press the navigation key down and select Simple,
Melodies, or Downloaded.
8. Press the navigation key down and then right or left to
select the desired alarm ringer.
9. Press the navigation key down and then left or right to
select Once or Daily.
10. Press
to Save.
Note: To stop an alarm after it goes off, press any key.
Chapter 9 - Tools
100
Calculator
The calculator allows you to perform simple
calculations using your phone. Addition, subtraction,
multiplication, and division can all be performed using
the keypad. The following keys are used:
Key
Function
Enters the sign for Addition (+).
Up
Enters the sign for Subtraction (-).
Enters the sign for Multiplication (x).
Enters the sign for Division (÷).
Left
Right
Down
Asterisk (*)
Pound (#)
Enters a point (.).
Enters a positive or negative number sign (-/+).
Enters the equal sign (=).
Clears out the display or erases any mistakes.
Chapter 9 - Tools
101
World Time
This feature allows you to check the Greenwich Mean
Time (GMT) for major cities and oceans around the
world. Press the navigation key to scroll through the list
of available cities. Your local date and time are also
displayed to allow the calculation between time zones.
World Time
Cabo Verde
London
Rome, Paris, Berlin
Abu Dhabi
Athens, Helsinki
Tashkent
Moscow
Alma Ata
Seoul, Tokyo
Bangkok, Jakarta
Guam, Sydney
Hong Kong, Beijing
Okhotsk
Wellington, Aukland Samoa, Midway
Honolulu, Hawaii
Denver, Calgary
Caracas, Halifax
Alaska
LA, Vancouver
NewYork, Toronto
Atlantic Ocean
Chicago, Winnipeg
Buenos Aires
To access world time:
1. Press
2. Press
3. Press
.
for Tools.
for World Time.
4. Press the navigation key left or right to view choices.
Chapter 9 - Tools
103
Countdown
The countdown option allows you to enter a time and
date for the phone to countdown. Days, hours, and
minutes are displayed until the entered time and date is
reached. Up to 10 countdown timers can be saved.
Creating a New Countdown Timer
1. Press
2. Press
3. Press
.
for Tools.
for Countdown.
4. If there are no timers saved, skip to the next step. If there
are timers already saved, press for Add New.
5. Enter the timer name using the keypad and press
.
6. Enter the countdown time/date and press
.
Deleting a Countdown
1. Press
2. Press
3. Press
.
for Tools.
for Countdown.
4. Select the desired countdown timer and press
for Erase.
Note: To erase all memos, press
.
5. Select Yes and press
to Confirm.
Chapter 9 - Tools
104
Chapter 9 - Tools
106
Setup Menu
The setup menu allows you to configure the look and
feel of your phone. Several options are located in the
setup menu. Settings include:
• Display
• Sounds
• Network
• Security
• Others
By customizing the settings located in the setup menu,
you can personalize your phone to suit your needs.
Display
The display options allow you to configure all the
different options that determine what is displayed on
your LCD screen. The following options are available:
• Menu Style - Selects the desired menu style.
• Wallpaper - Selects the desired wallpaper to display in
standby mode.
• Banner - Select the banner that displays in standby mode.
• Auto Hyphen - Automatically hyphenates numbers when you
are dialing.
• Backlight - Allows you to set the length of time the backlight
is On.
• Service LED - Allows you to turn the LED On or Off.
• Contrast - Adjust the contrast levels.
Chapter 10 - Setup Menu
108
• Version - Displays the current hardware and software version
loaded of your phone.
Menu Style
1. Press
2. Press
3. Press
4. Press
.
for Setup.
for Display.
for Menu Style.
5. Press the navigation key left or right to select Nature or
Camera.
6. Press
to Save.
Wallpaper
1. Press
.
2. Press
3. Press
4. Press
5. Press:
for Setup.
for Display.
for Wallpaper.
•
•
for Local Image
for Downloaded
6. Press the navigation key left or right to select the desired
wallpaper.
7. Press
to Save.
Chapter 10 - Setup Menu
109
Banner
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Display.
for Banner.
5. Press and hold
to delete the entire message. Enter
the new message using the keypad
6. Press
to Save.
Auto Hyphen
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Display.
for Auto Hyphen.
5. Press the navigation key up or down to select On or Off.
6. Press to Save.
Chapter 10 - Setup Menu
110
Backlight
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Display.
for Backlight.
5. Press the navigation key up or down to select:
• Open
• 30 seconds
• 8 seconds
• Off
6. Press
to Save.
Service LED
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Display.
for Service LED.
5. Press the navigation key up or down to select On or Off.
6. Press
to Save.
Contrast
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Display.
for Contrast.
5. Press the navigation key left or right to select the desired
contrast level and press
.
Chapter 10 - Setup Menu
111
Version
1. Press
.
2. Press
3. Press
4. Press
5. Press
for Setup.
for Display.
for Version.
to exit.
Sounds
The sounds setup menu allows you to configure the
different sounds associated with your phone. Several
functions have sound associated with them. The
following sound options are available:
• Ringer Volume - Allows you to set the ringer volume for
incoming calls.
• Ringer Type - Allows you to select the desired ringer for
incoming calls.
• Alerts - Allows you to select the desired ringer for alerts.
• Roam Ringer - Allows you to select a normal or distinctive
ringer for incoming roaming calls.
• Key Beep - Allows you to set the key beep volume.
• Tone Length - Allows you to select long or short tone
lengths.
• Power On/Off - Allows you to turn On or Off the sound when
the phone is powered on or off.
Chapter 10 - Setup Menu
112
Ringer Type
1. Press
.
2. Press
3. Press
4. Press
5. Press:
for Setup.
for Sounds.
for Ringer Type.
•
•
for Voice Calls
for Messages
•
•
for Data/Fax In
for Schedule
6. Select the desired ringer and press
to Save.
Note: If Voice Calls or Messages are selected, there are additional
menu choices associated with the function. A ringer type can be
selected for each one of the additional options.
Alerts
1. Press
2. Press
3. Press
4. Press
5. Press:
.
for Setup.
for Sounds.
for Alerts.
•
•
•
for Minute Beep
for Service
for Connect
Chapter 10 - Setup Menu
114
•
for Disconnect
6. Press the navigation key up or down to select:
• On
• Off
7. Press
to Save.
Roam Ringer
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Sounds.
for Roam Ringer.
5. Press the navigation key up or down to select:
• Distinctive
• Normal
6. Press
to Save.
Key Beep
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Sounds.
for Key Beep.
5. Press the navigation key left or right to select:
• Off
• Level 1-8
6. Press
to Save.
Chapter 10 - Setup Menu
115
Tone Length
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Sounds.
for Tone Length.
5. Press the navigation key up or down to select:
• Long
• Short
6. Press
to Save.
Power On/Off
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Sounds.
for Power On/Off.
5. Press the navigation key up or down to select:
• On
• Off
6. Press
to Save.
Chapter 10 - Setup Menu
116
Network
The network option allows you to configure roaming
options, call guard, and the options specific to the
carriers network. The following network options are
available:
• Set Mode
• Set NAM
• Call Guard
Set Mode
The set mode menu allows you to select between the
following options:
• Automatic - This option automatically switches between
digital and roaming service. If you are not in your coverage
area, it automatically switches to roaming.
• Home Only - This option only uses digital coverage inside
your coverage area. If you are outside the coverage area, it
does not switch to roaming.
To select the desired mode:
1. Press
2. Press
3. Press
4. Press
.
for Setup.
for Network.
for Set Mode.
5. Press the navigation key left or right to select the desired
choice and press to Save.
Chapter 10 - Setup Menu
117
Set NAM
The set NAM (Numerical Assignment Module) option
gives you the ability to have two different phone
numbers on the same phone. To switch between phone
numbers, select either NAM 1 or NAM 2.
To select the desired NAM:
1. Press
2. Press
3. Press
4. Press
.
for Setup.
for Network.
for Set NAM.
5. Press the navigation key up or down to select:
• NAM 1
• NAM 2
6. Press
to Save.
Chapter 10 - Setup Menu
118
Call Guard
The call guard option requires an extra step before
dialing a number when roaming. This keep you from
accidentally making a phone call while not in your
coverage area. When call guard is active, a warning
message is displayed on your phone and you must
press
to continue.
To activate the call guard option:
1. Press
2. Press
3. Press
4. Press
.
for Setup.
for Network.
for Call Guard.
5. Press the navigation key up or down to select:
• Yes
• No
6. Press
to Save.
Chapter 10 - Setup Menu
119
Security
The security menu has several options designed to
protect the phone against unauthorized usage. You can
erase your phonebook and set up call restrictions using
the options found in the security menu. Other options
include the ability to lock your phone, which requires a
lock code to be entered before it can be used. The
following security options are available:
• Lock Phone - Allows you to lock and unlock the phone, and
also set the phone to lock on power up. When the phone is
locked, a lock code is required before it can be used.
• Restriction - Allows you to set a restriction on what calls can
be made from the phone. The available options are Restrict
All, Pbook only, special #s, and Off. If the restriction option
is set and the user attempts to dial a number a warning
message is displayed.
• Change Lock - Allows you to change the lock code required
to access the security menu.
• Special #s - Allows you to enter the special numbers. Up to
three special numbers can be saved in your phone. These
numbers are usually set up to be emergency numbers.
• Erase Pbook - Allows you to delete your phonebook.
• Reset Phone - Allows you to reset the phone to the factory
installed defaults. If this option is used, all data is erased.
Chapter 10 - Setup Menu
120
Lock Phone
1. Press
.
2. Press
3. Press
for Setup.
for Security and enter your lock code.
Note: You lock code is usually the last four digits of your phone
number. If not, contact you service provider to get the correct lock
code.
4. Press
for Lock Phone.
5. Press the navigation key up or down to select:
• Unlocked
• On Power-Up
• Lock Now
6. Press
to Save.
Restriction
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Security and enter your lock code.
for Restriction.
5. Press the navigation key up or down to select:
• Restrict All
• PBook Only
• Special #s
• Off
6. Press
to Save.
Chapter 10 - Setup Menu
121
Change Lock
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Security and enter your lock code.
for Change Lock.
5. Enter the new lock code.
6. Re-enter the new lock code to confirm and press
Save.
to
Special #s
1. Press
2. Press
3. Press
4. Press
5. Press
.
for Setup.
for Security and enter your lock code.
for Special #s.
or
.
6. Press and hold
to erase the entry or press
once to delete one character at a time.
7. Enter the new number using the keypad.
8. Press
to Save.
Chapter 10 - Setup Menu
122
Erase Pbook
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Security and enter your lock code.
for Erase Pbook.
5. Press the navigation key up or down to select:
• Yes
• No
6. Press
.
.
Reset Phone
1. Press
2. Press
3. Press
4. Press
for Setup.
for Security and enter your lock code.
for Reset Phone.
5. Press the navigation key up or down to select:
• Yes
• No
6. Press
.
Chapter 10 - Setup Menu
123
Other Settings
The other settings menu allows you to configure the
following options:
• Launch Pad - Allows you to designate which application to
launch when pressing the navigation key left, right, up, or
down in standby mode.
• Answer Mode - Allows you to configure how a call is
answered.
• Auto Answer - This feature is only used with the optional
hands free car-kit.
• Language - Allows you to select the desired language setting.
Launch Pad
1. Press
2. Press
3. Press
4. Press
5. Press:
.
for Setup.
for Others
for Launch Pad.
•
•
•
for the Navigation Up key.
for the Navigation Down key.
for the Navigation Right key.
for the Navigation Left key.
•
6. Press:
•
•
for PbookSearch
for VoiceDial
Chapter 10 - Setup Menu
124
•
•
•
•
•
•
for Calculator
for Scheduler
for RingerType
for Worldtime
for Display
for Alarm
Answer Mode
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Others
for Answer Mode.
5. Press the navigation key up to select:
• Any Key
• Flip Open
• Send Key
6. Press
to Save.
Chapter 10 - Setup Menu
125
Auto Answer
Note: This option is only available for the optional hands free car-kit
accessory.
1. Press
2. Press
3. Press
4. Press
.
for Setup.
for Others
for Auto Answer.
5. Press the navigation key left or right to select:
• Car Kit Only - No
• Car Kit Only - Yes
6. Press
to Save.
Language
1. Press
.
2. Press
3. Press
4. Press
for Setup.
for Others
for Language.
5. Press the navigation key up to select:
• English
• Français
6. Press
to Save.
Chapter 10 - Setup Menu
126
Safety Information
Battery Precautions
Your phone is powered by a rechargeable Li-ion
standard battery. The read the following cautions
concerning the battery:
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If your phone has a strong signal, it uses less power; talk and
standby time are greatly affected by the signal strength on
the cellular network and the parameters set by the network
operator.
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The battery
can be charged and discharged hundreds of times, but it will
gradually wear out. When the operation time, including talk
time and standby time, is noticeably shorter than normal, it is
time to purchase a new battery.
• If left unused, a fully charged battery will discharge itself
over time.
• Use only Samsung-approved batteries and chargers. When a
charger is not in use, disconnect it from the power source.
Do not leave the battery connected to a charger for more than
a 7 days, since overcharging may shorten its life.
• Extreme temperatures will affect the charging capacity of
your battery. The battery may require cooling or warming
before charging.
• Do not leave the battery in hot or cold places, such as in a
car. It will reduce the capacity and life-time of the battery.
Chapter 11 - Safety and Warranty
128
• Always try to keep the battery at room temperature. A phone
with a hot or cold battery may not work correctly, even if the
battery is fully charged. Lilon batteries are sensitive to
temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short circuiting
can occur when a metallic object (coin, clip, or pen) causes a
direct connection between the positive and negative
terminals of the battery.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of batteries in a
fire.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But
an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off the
road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
wireless phone with one of the many hands-free
accessories available today.
Chapter 11 - Safety and Warranty
129
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through your
phonebook takes your attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary. If
you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make the people with whom you
are talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident or
medical emergencies. Remember, it is a free call on your
wireless phone!
9. Use your wireless phone to help others in emergencies.
If you see a car accident, crime in progress or other
Chapter 11 - Safety and Warranty
130
serious emergency where lives are in danger, call the
emergency number, as you would want others to do for
you.
10. Call roadside assistance or a special non emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or any other special non-
emergency wireless number.
Operating Environment
Remember to follow any special regulations in force in
any area and always switch off your phone whenever it
is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any
accessory to another device, read its user’s guide for
detailed safety instructions. Do not connect
incompatible products. As with other mobile radio
transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the
safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
Chapter 11 - Safety and Warranty
131
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• Should always keep the phone more than 15 cm (6 inches)
from their pacemaker when the phone is switched on;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch off your phone immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to
discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
Chapter 11 - Safety and Warranty
132
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information. Switch off your phone in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
Potentially Explosive Atmospheres
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants or where blasting operations
are in progress. Areas with a potentially explosive
Chapter 11 - Safety and Warranty
133
atmosphere are often but not always clearly marked.
They include below deck on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using
radio signals, wireless and land line networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you
should never rely solely on any wireless phone for
essential communications (medical emergencies, for
example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are in
use. Check with local service providers. If certain
features are in use (call barring, for example), you may
first need to deactivate those features before you can
make an emergency call. Consult this document and
your local cellular service provider. When making an
emergency call, remember to give all the necessary
information as accurately as possible. Remember that
your phone may be the only means of communication
Chapter 11 - Safety and Warranty
134
at the scene of an accident; do not cut off the call until
given permission to do so.
Other Important Safety Information
• Only qualified personnel should service the phone or install
the phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air
bag inflates with great force. Do not place objects, including
both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch off your phone before boarding an aircraft. The use of
wireless phones in aircraft may be dangerous to the
operation of the aircraft, and is illegal.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
Chapter 11 - Safety and Warranty
135
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of the
reach of small children’s.
• Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone’s electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and water solution.
Chapter 11 - Safety and Warranty
136
Warranty
STANDARD LIMITED WARRANTY
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and
accessories ("Products") are free from defects in
material and workmanship under normal use and
service for the period commencing upon the date of
purchase and continuing for the following specified
period of time after that date:
Phone
1 Year
1 Year
1 Year
1 Year
Batteries
Leather Case/Pouch
Holster
Other Phone Accessories 1 Year
What is Not Covered?
This Limited Warranty is conditioned upon proper use
of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from
accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification
of any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
Chapter 11 - Safety and Warranty
137
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with
accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG;
(e) defects or damage from improper testing, operation,
maintenance, installation, or adjustment; (f) installation,
maintenance, and service of Product, or (g) Product
used or purchased outside the United States or
Canada. This Limited Warranty covers batteries only if
battery capacity falls below 80% of rated capacity or
the battery leaks, and this Limited Warranty does not
cover any battery if (i) the battery has been charged by
a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals
on the battery are broken or show evidence of
tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it
is specified.
What are SAMSUNG's Obligations?
During the applicable warranty period, SAMSUNG will
repair or replace, at SAMSUNG's sole option, without
charge to Purchaser, any defective component part of
Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone
service facility in an adequate container for shipping,
accompanied by Purchaser's sales receipt or
comparable substitute proof of sale showing the date of
purchase, the serial number of Product and the sellers'
name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-
Chapter 11 - Safety and Warranty
138
888-987-4357. Upon receipt, SAMSUNG will promptly
repair or replace the defective Product. SAMSUNG
may, at SAMSUNG's sole option, use rebuilt,
reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced
leather cases, pouches and holsters will be warranted
for a period of ninety (90) days. All other repaired/
replaced Product will be warranted for a period equal to
the remainder of the original Limited Warranty on the
original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping, and labor charges for the repair or return of
such Product.
What Are the Limits On SAMSUNG's Liability?
EXCEPT AS SET FORTH IN THE EXPRESS
WARRANTY CONTAINED HEREIN, PURCHASER
TAKES THE PRODUCT "AS IS," AND SAMSUNG
MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, OF ANY
KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT, INCLUDING BUT NOT LIMITED TO:
·THE MERCHANTABILITY OF THE PRODUCT OR
ITS FITNESS FOR ANY PARTICULAR PURPOSE OR
USE;
Chapter 11 - Safety and Warranty
139
·WARRANTIES OF TITLE OR NON-INFRINGEMENT;
·DESIGN, CONDITION, QUALITY, OR
PERFORMANCE OF THE PRODUCT;
·THE WORKMANSHIP OF THE PRODUCT OR THE
COMPONENTS CONTAINED THEREIN; OR
·COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT.
ALL IMPLIED WARRANTIES AND CONDITIONS
THAT MAY ARISE BY OPERATION OF LAW,
INCLUDING IF APPLICABLE THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN
IMPLIED WARRANTY LASTS, SO THE ABOVE
LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR
ANY DAMAGES OF ANY KIND RESULTING FROM
THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING
DIRECTLY OR INDIRECTLY FROM THE USE OR
Chapter 11 - Safety and Warranty
140
LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS,
OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS
NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER
RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THE ORIGINAL PURCHASER OF
THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW,
SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
Chapter 11 - Safety and Warranty
141
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES
OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRD-PARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE
AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH
THE PURCHASER AND THE DIRECT VENDOR,
OWNER OR SUPPLIER OF SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty.
The agents, employees, distributors, and dealers of
Chapter 11 - Safety and Warranty
142
SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties
binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by
SAMSUNG and should not be relied upon.
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2002 Samsung Telecommunications America. All
rights reserved.
No reproduction in whole or in part allowed without
prior written approval.
Specifications and availability subject to change
without notice.
Chapter 11 - Safety and Warranty
143
Chapter 11 - Safety and Warranty
144
|
