Samsung SGH x495 User Manual

SGH-x495 Series  
P O R T A B L E T r i - B a n d  
T E L E P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
UVEE5_1.2_WCx495_052705_f4_rev  
GH68-06976A  
Openwave® is a registered Trademark of Openwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY  
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH  
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS  
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE  
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,  
CONDITION OR QUALITY OF THE PRODUCT; THE  
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP  
OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING  
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED  
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT  
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR  
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR  
BENEFITS.  
Table of Contents  
1
2
Table of Contents  
3
4
Section 1: Getting Started  
Topics Covered  
• Activating Your Phone  
• Switching the Phone On or Off  
• Setting Up Your Voicemail  
This section allows you to start using your phone by  
activating your service and setting up your voice mail.  
Section 1: Getting Started  
5
   
Activating Your Phone  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and many others.  
Installing the SIM Card  
Important! The plug-in SIM card and its contacts can be easily damaged  
by scratching or bending, so be careful when handling, inserting, or  
removing the card.  
Keep all SIM cards out of reach of small children.  
Ifnecessary,switchoffthephonebyholdingdownthe  
key until the power-off image displays.  
Remove the battery. To do so:  
1. Slide the battery lock toward the top of the phone and  
hold it in that position.  
2. Lift the battery away, as shown.  
6
       
Activating Your Phone  
3. Slide the SIM card into the SIM card socket so that the  
card locks into place. Make sure the gold contacts of the  
card face into the phone.  
Note: When you need to remove the SIM card, slide it, as shown, and take  
it out of the socket.  
Section 1: Getting Started  
7
4. Place the battery so that the tabs on the end align with  
the slots at the bottom of the phone.  
5. Press the battery down until it clicks into place. Make  
sure that the battery is properly installed before  
switching on the phone.  
Charging a Battery  
YourphoneispoweredbyarechargeableLi-ionbattery.A  
travel adapter comes with your phone for charging the  
battery. Use only approved batteries and chargers. Ask  
your local Samsung dealer for further details.  
You can use the phone while the battery is charging, but  
this causes the phone to charge more slowly.  
8
     
Activating Your Phone  
Note: You must fully charge the battery before using your phone for the  
first time. A discharged battery recharges fully in approximately  
200 minutes.  
1. With the battery in position on the phone, remove the  
jack cover at the bottom of the phone and plug the  
connector of the travel adapter into the jack.  
2. Plug the adapter into a standard AC wall outlet.  
3. When charging is finished, unplug the adapter from the  
power outlet and disconnect it from the phone by  
pressing the buttons on both sides of the connector (1)  
and pulling the connector out (2).  
Section 1: Getting Started  
9
Note: You must unplug the adapter before you remove the battery from the  
phone during charging; otherwise, the phone could be damaged.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk  
time remain, a warning tone sounds and the “Warning  
Low Battery” message repeats at regular intervals on the  
display. When this happens, your phone turns off the  
backlight to conserve the remaining battery power.  
When the battery level becomes too low, the phone  
automatically turns off.  
Switching the Phone On or Off  
1. Open the phone.  
2. Press and hold the  
key until the phone switches on.  
3. If the phone asks you to enter the phone password, enter  
the password and press the OK soft key or the key.  
The password is preset to “00000000” at the factory. For  
4. If the phone asks for a PIN, enter the PIN and press the  
OK soft key or the key. For further details, see "PIN  
The phone searches for your network and after finding it,  
the Idle screen appears. Now, you can make or receive  
calls.  
10  
         
Setting Up Your Voice Mail  
Note: The display language is preset to English at the factory. To change  
the language, use the Language menu. For further details, see "Language"  
5. When you wish to switch off the phone, press and hold  
the  
key until the power-off image displays.  
Setting Up Your Voice Mail  
For new users, follow the instructions below to set up  
voicemail:  
1. In Idle mode, press and hold the  
key on the keypad.  
You are prompted to enter the password.  
2. Follow the voice mail prompts to create a password, a  
greeting, and your voice mail greeting.  
Note: These steps may be different depending on your network.  
Accessing Your Voice Mail  
YoucanaccessyourVoiceMailbypressingthe  
the keypad or by going to the menu. To access Voice Mail  
using the menu:  
keyon  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
3. Highlight Voice mail and press the Select soft key or the  
key.  
Section 1: Getting Started  
11  
     
4. Highlight Call voice mail and press the Select soft key  
or the key. Your phone dials the specified voice mail  
number.  
5. When connected, follow the voice prompts from the  
voice mail center.  
Changing the Voice Mail Number  
YourSIMcardgivesyouthedefaultservicenumberofthe  
voice mail center. However, you may need to change the  
number. Use the following procedures to change your  
voice mail number.  
1. In Idle mode, press the Menu soft key to access the  
Menu mode.  
2. Highlight Messages and press the Select soft key or the  
key.  
3. Highlight Voice mail and press the Select soft key or the  
key.  
4. Highlight Voice server number and press the Select  
soft key or the key.  
5. Select the Empty option and press the Select soft key or  
the key.  
Note: After your phone has been activated by your service provider, the  
Empty option will appear as the Voice mail option.  
6. Highlight Edit number and press the Select soft key or  
the key.  
7. After editing the number, press the OK soft key to save  
the update.  
12  
 
Setting Up Your Voice Mail  
You may also select the option to edit the voice mail  
name or delete the voice mail number.  
8. Press the key to return to Idle mode.  
Section 1: Getting Started  
13  
14  
Section 2: Understanding Your Phone  
Topics Covered  
• Features of Your Phone  
• View of Your Phone  
• Keys  
• Understanding the Display Screen  
This section outlines some key features of your phone. It  
also displays the screen and the icons that are displayed  
when the phone is in use.  
Section 2: Understanding Your Phone  
15  
   
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many  
significantfeatures.Thefollowinglistoutlinesafewofthe  
features included in your phone.  
User friendly, menu driven access to features and options.  
Instant Messaging capability.  
Multimedia capability.  
Organizer feature provides calendar, to-do list, alarms,  
calculator, and conversion capability.  
View of Your Phone  
The following illustrations show the main elements of  
your phone:  
16  
       
Keys  
Keys  
The following list correlates to the illustrations.  
1. Display area where text and graphics are displayed.  
2.  
3.  
The headset jack is used for the hands-free headset.  
Performs the functions indicated by the screen text on  
the bottom line of the display.  
4. Makes or answers a call.  
In Idle mode, recalls the last number dialed or received  
when held down.  
In Menu mode, selects a menu function or stores  
information that you have entered, such as a name in  
the phone or SIM memory.  
5. During a call, adjusts the earpiece volume.  
In Idle mode with the phone open, adjusts the keypad  
tone volume. With the phone closed, turns on the  
external display when held down.  
6. In Idle mode, accesses voice mail when held down.  
7. Enters numbers, letters, and some special characters.  
Section 2: Understanding Your Phone  
17  
 
8. Enters special characters. Performs various functions.  
9. The microphone used during phone calls and voice  
memo recordings.  
10. Deletes characters from the display.  
In Menu mode, returns you to the previous menu level.  
11. Ends a call. Also switches the phone on and off when  
held down.  
In Menu mode, cancels your input and returns the phone  
to Idle mode.  
12. In Idle mode, launches the WAP (Wireless Application  
Protocol) browser.  
In Menu mode, selects the highlighted menu options.  
13. In Menu mode, scrolls through the menus and  
Phonebook.  
In Idle mode, the Down key allows you to access the  
Phonebook Search menu directly.  
When entering text, moves the cursor to the left or right,  
depending on which side you push.  
14. The earpiece is used to listen to audio from your phone.  
15. The external display shows the received signal strength,  
the phone battery level, the date and time.  
18  
Understanding the Display Screen  
Understanding the Display Screen  
The display has 3 areas:  
Icons  
Shows the received signal strength. The greater the  
number of bars, the stronger the signal.  
Appears when a new text message has been received.  
Appears when a new voice mail has been received.  
Appears when a new multimedia message has been  
received.  
Appears when you set an alarm to ring at a specified  
time. For details, see page "Alarm" on page 104.  
Appears when you are out of your service area.  
Appears when a call is in progress.  
Appears when you are connected to a WAP service.  
Appears when the Call Forwarding feature is active. For  
Appears when Alert type is set to vibration.  
Section 2: Understanding Your Phone  
19  
   
Appears when Silent mode is active.  
Appears when Mute is active.  
Shows the level of your battery. The more bars you see,  
the more power you have remaining.  
Backlight  
A backlight illuminates the display and the keypad.  
When you press any key or openthe phone, thebacklight  
comes on. It goes off when no keys are pressed within a  
givenperiodoftime,dependingonthesettingintheBack  
light menu. The display turns off after one minute to  
conserve battery power.  
Tospecifythelengthoftime thebacklightisactive, setthe  
Back light menu. See "Back Light" on page 93 for further  
details.  
External Display  
Your phone has an external display on the front of the  
phone. It indicates when you have an incoming call, a  
missed call, or a message. It also alerts you at a specified  
timewhenyouhavesetanalarm.See"Alarm"onpage104  
for further details. The backlight turns on and the  
corresponding icon appears on the external display.  
Whenyouclosethephone,thedisplayshowsthedateand  
current time on a digital clock.  
20  
   
Section 3: Call Functions  
Topics Covered  
• Making a Call  
• Adjusting the Call Volume  
• Answering a Call  
• Call Log  
• Call Records  
• Silent Mode  
• Selecting Functions and Options  
This section allows you to make or answer a call. It also  
includes the features and functionality associated with  
making or answering a call.  
Section 3: Call Functions  
21  
   
Making a Call  
When the idle screen displays, enter the area code and  
phone number, and press the  
key.  
Note: When you activate the Auto redial option in the Extra settings menu,  
the phone will automatically redial up to 10 times when the person does  
not answer the call or is already on the phone. See "Extra Settings" on  
page 97 for further details.  
Making an International Call  
1. Press and hold the 0 key. The + character appears.  
2. Enter the country code, area code, and phone number  
and press the  
key.  
Correcting the Number  
1. To clear the last digit displayed, press the C key.  
2. To clear any other digit in the number, press the Left or  
Right key until the cursor is immediately to the right of  
the digit to be cleared. Press the C key. You can also  
enter a missing digit.  
3. To clear the whole display, press and hold the C key.  
Ending a Call  
When you want to finish your call, briefly press the  
key.  
Redialing the Last Number  
The phone stores the numbers of the calls you’ve dialed,  
received, or missed if the call recipient or caller is  
identified. See "Caller ID" on page 101 for further details.  
To recall any of these numbers:  
22  
         
Making a Call  
1. If you have typed characters on the display, press the  
key to return to Idle mode.  
2. Press the key to display a list of the most recent  
numbers used in the order you dialed or received them.  
3. Use the Up and Down keys to scroll through the  
numbers until the number you want highlights.  
4. To dial the number, press the  
key or the key.  
Before you dial the number, you also have the following  
options:  
To see details of the number, press the Options soft key and  
select Details. Press the Select soft key or the key.  
To call back the number, press the Options soft key and  
select Call back. Press the Select soft key or the key.  
The number is dialed.  
To send a text or picture message to the number, press the  
Options soft key and select Send message. Press the  
Select soft key or the key.  
To edit the number, press the Options soft key and select  
Edit. Press the Select soft key or the key.  
To delete the number, press the Options soft key and select  
Delete. Press the Select soft key or the key.  
To delete all of the numbers, press the Options soft key and  
select Delete all. Press the Select soft key or the key.  
Making a Call from the Phonebook  
You can store phone numbers that you use regularly on  
the SIM card or in the phone’s memory. These entries are  
collectively called Phonebook.  
Once you have stored a number in the Phonebook, you  
candialitbypressingafewkeys.Youcanalsoassignyour  
Section 3: Call Functions  
23  
 
most frequently-used numbers to number keys using the  
Speed Dial feature.  
For further details about the Phonebook feature, see  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece volume,  
use the Volume keys on the left side of the phone.  
Pressthe key to increasethevolumelevelandthe key  
to decrease the level.  
InIdlemode, youcanalsoadjustthekeypadtonevolume  
using these keys.  
Answering a Call  
When someone calls you, the phone rings and displays  
the incoming call image.  
24  
       
Call Log  
The caller’s phone number, or name if stored in  
Phonebook, displays.  
1. If necessary, open the phone. Press the  
key or the  
Accept soft key to answer the incoming call.  
If the Anykey answer option is activated, you can press  
any key to answer a call except for the key and the  
Reject soft key. For further details about the Anykey  
If the Active Flip option is activated, you can answer the  
call simply by opening the phone. For further details  
Note: To reject an incoming call, press and hold the Volume keys on the left  
side of the phone before opening the phone, or press the Reject soft key or  
key.  
2. End the call by closing the phone or pressing the  
key.  
Note: You can answer a call while using the Phonebook or menu features.  
After ending the call, the phone returns to the function screen you were  
using.  
Call Log  
All incoming, outgoing and missed calls are listed in the  
Call Log.  
1. To access the Call Log option, press the  
key. A list of  
calls displays.  
Section 3: Call Functions  
25  
   
2. Highlight one of the calls and press the Options soft key  
or the key. You can use the different options to view  
call details, call back, send a message, edit, or delete.  
3. To place a call, press the  
key.  
Viewing Missed Calls  
When you are unable to answer a call for any reason, you  
can find out who is calling you, if this service is available,  
so that you can call the person back.  
The number of calls you have missed displays on the idle  
screen and the external display immediately after a call is  
missed.  
To view a missed call immediately:  
1. If the phone is closed, open the phone.  
2. Press the View soft key.  
The number corresponding to the most recent missed  
call displays, if available.  
3. To scroll through the missed calls, press the Up or Down  
key.  
4. To call the number displayed, press the  
key.  
5. To edit or delete a missed call number, highlight the  
number and press the Select soft key or the key. See  
procedures below.  
Editing a Missed Call Number  
To edit a missed call number:  
1. Press the Options soft key and select Edit.  
26  
   
Call Records  
2. Change the number and press the Save soft key or the  
key.  
3. Select a location (SIM or Phone) and press the Select  
soft key or the key.  
4. If you saved the number to Phone, highlight a phone  
type and press the Select soft key or the key.  
5. Enter a name and press the OK soft key or the key.  
6. Press the Options soft key to Send message, Assign  
speed dial, Edit number or name, Delete entry, or Copy to  
SIM or Phone.  
Deleting a Missed Call  
1. Press the Options soft key or the key.  
2. If necessary, press the Up or Down key to highlight the  
Delete option.  
3. Press the Select soft key or the key.  
4. When you receive the Sure to delete? confirmation  
message, select the Yes soft key to confirm deletion, or  
the No soft key to cancel.  
You can press the  
Call feature.  
key at any time to exit the Missed  
Note: You can access the Missed Call feature at any time by selecting the  
Missed calls menu.  
Call Records  
In this menu, you can view:  
missed calls, incoming calls, and outgoing calls.  
Section 3: Call Functions  
27  
     
length of your calls.  
Note: You can access the call records of incoming, outgoing, and missed  
calls by pressing the  
key in Idle mode.  
Note: The number of call records the phone can store may vary, depending  
on your SIM card.  
Missed calls  
This menu lets you view the 20 most recent calls you  
received, but did not answer.  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
received.  
Incoming calls  
This menu lets you view the 20 most recent calls you  
received.  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
received.  
Outgoing calls  
This menu lets you view the 20 most recent calls you  
dialed.  
The number and name, if already stored in your  
Phonebook, displays with the time and date the call was  
made.  
28  
     
Call Records  
Delete all  
This menu allows you to delete all of the records in each  
call record separately, or you can delete all of your call  
records at one time.  
1. Highlight the type of calls you want to delete and press  
the Select soft key or the  
key to make a check mark.  
2. Press the OK soft key to delete the calls.  
3. When a confirmation message displays, press the Yes  
soft key or  
key to confirm.  
Call time  
This menu lets you view the time log for calls made and  
received.  
Note: The actual time invoiced by your service provider may vary,  
depending on network features, rounding-off for billing purposes, and so  
on.  
The following time logs are available:  
Last call: shows the length of your last call.  
Total outgoing: shows the total length of all calls you have  
made since the timer was last reset.  
Total incoming: shows the total length of all calls you have  
received since the timer was last reset.  
Life time: shows the total length of time for incoming and  
outgoing calls. The length of call time must be at least 1  
minute to increment this field. This information cannot be  
cleared.  
Reset timers: allows you to reset the call timers. You must  
first enter the phone password and then press the OK soft key  
or  
key.  
Section 3: Call Functions  
29  
   
Note: The password is preset to “00000000” at the factory. To change this  
Note: This will not reset the Life time timer option.  
Silent Mode  
Silent mode is convenient when you wish to prevent the  
phone from making noise, in a theater for example.  
In Idle mode, press and hold the key until the “Silent  
Mode On” message and the Silent mode icon ( ) display.  
In Silent mode, instead of sounds, your phone will  
vibrate.  
To exit and reactivate the previous sound settings, press  
and hold the key again until the “Exit Silent Mode”  
message appears. The Silent mode icon ( ) no longer  
displays.  
Selecting Functions and Options  
Your phone offers a set of functions that allow you to  
customize it. These functions are arranged in menus and  
sub-menus, accessed using the two soft keys. Each menu  
andsub-menuallowsyoutoviewandalterthesettingsof  
a particular function.  
Soft Keys  
The roles of the soft keys vary depending on the function  
you are currently using. The labels on the bottom line of  
thedisplayjustaboveeachkeyindicatetheircurrentrole.  
30  
         
Selecting Functions and Options  
The following diagram shows the soft key role while in  
Idle mode.  
Press the right soft key  
to access the Ph.Book  
menu.  
Press the left soft key  
for Menu mode.  
Selecting Options  
To view the various functions and options available and  
to select the one you want:  
1. Press the appropriate soft key.  
2. To select the function displayed or the option highlighted,  
press the Select soft key or the key.  
3. To view the next function or highlight the next option on  
a list, press the Down key.  
4. To move back to the previous function or option on a list,  
press the Up key.  
5. To move back up one level in the menu structure, press  
the C key or the key.  
Section 3: Call Functions  
31  
6. To exit the menu structure without changing the settings,  
press the key.  
In some functions, you may be asked for a password or  
PIN.EnterthecodeandpresstheOKsoftkeyorthe key.  
When you access a list of options, your phone highlights  
thecurrentlyactiveoption.If,however,thereareonlytwo  
options, such as On/Off or Enable/Disable, your phone  
highlights the option that is not currently active, so that  
you can select it directly.  
Options During a Call  
Your phone provides a number of control functions that  
you can use during a call.  
Putting a Call on Hold  
Youcanplacethecurrentcallonholdwheneveryouwant.  
You can make another call while you have a call in  
progress if your network supports this service.  
To place a call on hold:  
1. Press the Options soft key or the key.  
2. If necessary, press the Down key to highlight the Hold  
option.  
3. Press the Select soft key or the key.  
The call has now been placed on hold.  
You can reactivate the call whenever you want, by  
pressing the Resume soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or look it up  
in the Phonebook.  
32  
   
Selecting Functions and Options  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
When you have an active call and a call on hold, you may  
switchbetweenthetwocalls, changingtheoneonholdto  
active and placing the other on hold.  
To switch between the two calls, simply press the Swap  
soft key.  
The current call is placed on hold and the call on hold is  
reactivatedsothatyoucancontinueconversingwiththat  
person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Switching off the Microphone (Mute)  
Youcantemporarilyswitchyourphone’smicrophoneoff,  
so that the other person cannot hear you.  
Example: You wish to say something to a person in the room but do not  
want the person on the phone to hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key or the key.  
2. Use the Navigation keys to highlight the Mute option.  
3. Press the Select soft key or the key. The other person  
can no longer hear you.  
To switch the microphone back on:  
1. Press the Opt. soft key or the key.  
2. Use the Navigation keys to highlight the Unmute option.  
Section 3: Call Functions  
33  
 
3. Press the Select soft key or the key. The other person  
can hear you again.  
Using the Speakerphone  
While on a call, you can use your Speakerphone by  
following these steps:  
1. Press the Spkr on soft key.  
2. You will receive the confirmation, Speaker on?  
3. Press the Yes soft key.  
4. To turn the Speakerphone off, press the Spkr off soft  
key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If  
the Mute keys option is selected, your phone does not  
transmittheDTMF(DualToneMulti-Frequency)tonesof  
the keys, which allows you topress keys without hearing  
annoying key tones during a call.  
Note: To communicate with answering machines or computerized  
telephone systems, the Send keys option must be selected.  
Searching for a Number in Phonebook  
You can search for a number in Phonebook during a call.  
1. Press the Options soft key or the key.  
2. Press the Down key to highlight the Phonebook option  
and press the Select soft key or the key.  
3. Press the Down key to highlight the Search option and  
press the Select soft key or the key.  
34  
   
Selecting Functions and Options  
The Phonebook entries are listed.  
4. Enter the name that you wish to find in the textbox  
located below the entries.  
If you enter the first few letters of the name, the  
Phonebook entries are listed starting with the first entry  
matching your input.  
5. To view the highlighted entry, press the View soft key or  
the key.  
For further details about the Phonebook feature, see  
Call Waiting  
You can answer an incoming call while you have a call in  
progress if this service is supported by the network and  
you have set the Call waiting menu to Activate. You are  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call. The first  
call is automatically put on hold.  
2. To switch between the two calls, press the Swap soft  
key.  
To end a call on hold, press the Options soft key or the  
key and select the End held call option.  
To end the current call, press the  
key.  
For details on Call Waiting setup, see "Call Waiting" on  
Section 3: Call Functions  
35  
 
Making a Multi-Party Call  
Amulti-partycallisanetworkservicethatallowsuptosix  
people to take part simultaneously in a multi-party or  
conference call.  
For further details about subscribing to this service,  
contact your service provider.  
Setting up a Multi-Party Call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way. The first  
call is automatically put on hold.  
3. To join the first participant to the multi-party call, press  
the Options soft key or the key and select Join. Press  
the OK soft key or the key.  
4. To add a new person to the multi-party call, call the new  
person in the normal way and then press the Options  
soft key or the key. Select the Join option and press  
the OK soft key or the key.  
You can add incoming callers by answering the call and  
pressing the Options soft key or the key, and selecting  
Join. Repeat as required.  
Having a Private Conversation With One Participant  
1. Press the Options soft key or the key and highlight  
the Split option. Press the Select soft key or the key.  
The list of call participants appears.  
2. Highlight the call you wish to speak privately with and  
press the Select soft key, the  
key, or the key.  
36  
   
Selecting Functions and Options  
Now you can talk privately to that person. The other  
participants can continue to converse with each other.  
3. To return to the multi-party call, press the Options soft  
key or the key and highlight the Join option. Press the  
Select soft key or the key.  
All of the multi-party call participants can now hear each  
other.  
Dropping One Participant  
1. Press the Options soft key or the key and highlight  
the Split option. Press the Select soft key or the key.  
The list of call participants appears.  
2. Highlight the call you wish to speak privately with and  
press the Select soft key, the  
key, or the key.  
Now you can talk privately to that person.  
3. To drop the other participant that is now on hold, press  
the Options soft key or the key and highlight the End  
held multiparty option. Press the Select soft key or the  
key  
The call with that participant ends, but you can continue  
to talk to the other participants.  
4. When you want to end the multi-party call, close the  
phone or press the  
key.  
Section 3: Call Functions  
37  
 
38  
Section 4: Menu Navigation  
Topics Covered  
• Menu Navigation  
• Menu Outline  
This section explains the menu navigation for your  
phone. It also includes an outline of all the available  
menus associated with your phone.  
Section 4: Menu Navigation  
39  
   
Menu Navigation  
You can tailor the phone’s range of functions to your  
needs using menus and sub-menus. Menus and sub-  
menus can be accessed by scrolling using the Navigation  
keys or by using the shortcuts.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu  
mode.  
2. Scroll using the Navigation keys to reach a main menu,  
Settings for example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Language for  
example, you can access them by pressing the Select  
soft key or the key.  
If the menu that you have selected contains further  
options, repeat this step.  
4. To scroll through the menus, press the Up or Down keys.  
5. To confirm the chosen setting, press the Select soft key,  
or the key.  
6. To return to the previous menu level, press the key or  
the  
key.  
7. To exit the menu without changing the settings, press the  
key.  
Using Shortcuts  
Themenuitems,suchasmenus,sub-menus,andoptions,  
are numbered and can be accessed quickly by using their  
shortcut numbers. For the main menus, you can access  
40  
     
Menu Outline  
any one of them by pressing the number keys (1 to 9)  
corresponding to their location on the screen.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press the 9 key for Settings.  
3. Press the 5 key for Language.  
4. Press the 1 key for Text language.  
The available languages are displayed.  
Menu Outline  
Thefollowinglistshowsthemenustructureandindicates  
the number assigned to each option.  
1. Voice messages  
2. Call records  
2.1 Missed calls  
2.2 Incoming calls  
2.3 Outgoing calls  
2.4 Delete all  
2.5 Call time  
2.5.1 Last call  
2.5.2 Total outgoing  
2.5.3 Total incoming  
2.5.4 Life time  
2.5.5 Reset timers  
Section 4: Menu Navigation  
41  
   
3. t-zones  
3.1 Home  
3.2 Favorites  
3.3 Go to URL  
3.4 Clear cache  
4. IM  
5. Messages  
5.1 Text messages  
5.1.1 Create  
5.1.2 Inbox  
5.1.3 Outbox  
5.1.4 Delete all  
5.2 Picture messages  
5.2.1 Create  
5.2.2 Inbox  
5.2.3 Outbox  
5.2.4 Draft  
5.2.5 Delete all  
5.3 Browser messages  
5.3.1 Inbox  
5.3.2 Receive  
5.3.3 Delete all  
5.4 Voice mail  
42  
Menu Outline  
5.4.1 Call voice mail  
5.4.2 Voice server number  
5.5 Broadcast*  
5.6 Settings  
5.6.1 Text messages  
5.6.2 Picture messages  
5.7 Memory status  
5.7.1 Text messages  
5.7.2 Picture messages  
6. Funbox  
6.1 t-zones  
6.2 Sounds  
6.3 Images  
6.4 Games  
6.5 Delete all  
6.5.1 Sounds  
6.5.2 Images  
6.6 Memory status  
7. Organizer  
7.1 Alarm  
7.2 Calendar  
7.3 Calculator  
7.4 To do list  
Section 4: Menu Navigation  
43  
7.5 Voice memo  
7.5.1 Record voice  
7.5.2 Voice memos  
7.5.2 Delete all  
7.5.3 Settings  
7.5.4 Memory status  
7.6 Conversion  
7.6.1 Length  
7.6.2 Weight  
7.6.3 Volume  
7.6.4 Area  
7.6.5 Temperature  
7.7 Timer  
7.8 Stopwatch  
8. Sound settings  
8.1 My MegaTones  
8.2 Get More MegaTones  
8.3 Ringtones  
8.4 Ring volume  
8.5 Alert type  
8.6 Keypad tone  
8.7 Message tone  
8.7.1 Text messages  
8.7.2 Picture messages  
44  
Menu Outline  
8.8 Power on/off  
8.9 Alerts on call  
8.0 Extra tones  
9. Settings  
9.1 Time & Date  
9.1.1 Set date  
9.1.2 World time  
9.1.3 Set time  
9.1.4 Time format  
9.1.5 Auto update  
9.2 Display settings  
9.2.1 Wallpaper  
9.2.2 Interior display  
9.2.3 Backlight  
9.2.4 Brightness control  
9.2.5 Dialing font color  
9.3 Get More Help  
9.4 Greeting message  
9.5 Language  
9.5.1 Text language  
9.5.2 Input mode  
9.6 Security  
9.6.1 PIN check  
9.6.2 Change PIN  
Section 4: Menu Navigation  
45  
9.6.3 Phone lock  
9.6.4 Change password  
9.6.5 Privacy  
9.6.6 FDN mode  
9.6.7 Change PIN2  
9.7 Extra settings  
9.8 Reset settings  
9.8.1 Sound settings  
9.8.2 Phone settings  
9.8.3 All settings  
9.9 Network services  
9.9.1 Call forwarding  
9.9.2 Call waiting  
9.9.3 Network selection  
9.9.4 Caller ID  
9.9.5 Band selection  
* Shows only if supported by your SIM card.  
46  
Section 5: Entering Text  
Topics Covered  
• Changing the Text Input Mode  
• Using T9 Mode  
• Using ABC Mode  
• Using Symbols  
• Using Numbers  
This section outlines how to select the desired text input  
mode when entering characters into your phone. This  
section also describes how to use the T9 predictive text  
entry system to reduce the number of key strokes  
associated with entering text.  
Section 5: Entering Text  
47  
     
Changing the Text Input Mode  
Whenusingyourphone,youwilloftenneedtoentertext,  
suchaswhenstoringanameinPhonebook,creatingyour  
personal greeting or scheduling events on your calendar.  
You can enter alphanumeric characters by using your  
phone’s keypad.  
Your phone has the following text input modes:  
ABC mode: this mode allows you to enter letters by pressing  
the key labeled with the letter you want. Press the key once,  
twice, three, or four times until it displays.  
T9 mode: this mode allows you to enter words with only one  
keystroke per letter. Each key on the keypad has more than one  
letter; for example, pressing the 5 key can enter J, K, or L.  
However, the T9 mode automatically compares the series of  
keystrokes you make with an internal linguistic dictionary to  
determine the most likely word, thus requiring far fewer  
keystrokes than the traditional ABC mode.  
Number mode: this mode allows you to enter numbers.  
Symbol mode: this mode allows you to enter symbols, such as  
punctuation marks.  
When you are in a field that allows characters to be  
entered, you will notice the text input mode indicator on  
the display.  
Example: Writing a text message.  
48  
             
Using T9 Mode  
Text input mode  
indicator  
1. To change the text input mode, press the  
2. Highlight the input option that you want and press the  
Select soft key or the key.  
key.  
3. Choose from the following options:  
: ABC mode  
: T9 mode  
: Number mode  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key  
in any character using single keystrokes. This text input  
mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word by  
pressing the 2 to 9 keys. Press each key only once for  
each letter.  
Section 5: Entering Text  
49  
   
Example: To enter “Hello” in T9 mode, press the 4,3,5,5, and 6 keys.  
The word that you are typing appears on the display. It  
may change with each key that you press.  
2. Enter the whole word before editing or deleting the  
keystrokes.  
3. When the word displays correctly, go to step 4.  
If the word doesn’t display correctly, press the 0 key or  
the Up or Down key to display alternative word choices  
for the keys that you have pressed.  
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays  
the most commonly used choice first.  
4. Insert a space by pressing the key and start entering  
the next word.  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the word you  
want to add, press the 0 key to display the alternative  
words.  
2. When you press the 0 key at the last alternative word,  
the display shows Spell on the bottom line. Press the  
Spell soft key or the key.  
3. Enter the word you want to add using ABC mode. See  
4. Press the OK soft key or the key.  
The word is added to the T9 dictionary and becomes a  
word for the associated keypress series.  
50  
Using ABC Mode  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, or apostrophes, press the 1 key. T9  
mode applies grammar rules to ensure that correct punctuation  
is used.  
To shift case in T9 mode, use the key. There are 3 cases:  
Initial capital, Capital lock, and Lower case.  
You can move the cursor by using the Navigation keys. To  
delete letters, press the C key. Press and hold the C key to  
clear the display.  
Using ABC Mode  
TousetheABCModeusethe1to0keystoenteryourtext.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When  
entering the same letter twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move to the right automatically,  
and then select the next letter.  
Keys  
Section 5: Entering Text  
51  
   
52  
Using Symbols  
Using Symbols  
Symbol mode enables you to insert symbols and  
punctuation marks into text.  
1. To select a symbol, press the corresponding number key.  
2. To display more symbols, press the Up or Down  
Navigation key.  
3. To clear the symbol(s), press the C key. When the input  
field is empty, this key returns the display to the  
previous mode.  
4. To insert the symbol(s) into your message, press the OK  
soft key or the key.  
Using Numbers  
Number mode enables you to enter numbers into a text  
message. Press the keys corresponding to the digits you  
want to enter.  
Section 5: Entering Text  
53  
       
54  
Section 6: Understanding Your  
Phonebook  
Topics Covered  
• Finding a Phonebook Entry  
• Storing a Number in the Phone’s Memory  
• Storing a Number in the SIM Memory  
• Dialing a Number from the Phonebook  
• Dialing a Number from the SIM Card  
• Speed Dialing  
• Copying SIM Phonebook Entries to Phone  
• Deleting all Phonebook Entries  
• Group Settings  
• Finding My Own Number  
• Checking the Memory Status  
• Service Dialing Numbers (SDN)  
This section allows you to manage your daily contacts by  
storing their name and number in your Phonebook.  
Phonebookentriescanbesortedbyname,entry,orgroup.  
Section 6: Understanding Your Phonebook  
55  
     
Finding a Phonebook Entry  
You can store phone numbers and their corresponding  
names in your SIM card and phone’s memories. They are  
physically separate but are used as a single entity, called  
Phonebook.  
Depending on your particular SIM card, the maximum  
number of phone numbers the SIM card can store may  
differ.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Highlight the Search option and press the Select soft  
key or the  
key. You are asked to enter a name.  
3. Enter the first few letters of the name.  
The Phonebook entries are listed, starting with the first  
entry matching your input.  
4. To view the highlighted entry, press the View soft key.  
5. Press the  
key to dial the number, or press the  
Options soft key to access the Phonebook entry options.  
Storing a Number in the Phone’s Memory  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to New entry by pressing the Up or Down key and  
press the Select soft key or the  
3. Select the Phone option by pressing the Up or Down key  
and press the Select soft key or the key.  
4. Select a number type by pressing the Up or Down key,  
key.  
and press the Select soft key or the  
key.  
The following types are available:  
56  
     
Storing a Number in the Phone’s Memory  
Mobile: assigns the number entered to the Mobile entry.  
Home: assigns the number entered to the Home entry.  
Office: assigns the number entered to the Office entry.  
Fax: assigns the number entered to the Fax entry.  
Other: allows you to enter more detailed information for the  
entry.  
E-mail: allows you to enter an e-mail address for the number  
entered.  
5. Enter the number you want to store and press the Save  
soft key or the  
key.  
6. Enter a name and press the OK soft key or the  
key.  
For further details about how to enter characters, see  
After storing, the phone displays the Phonebook entry  
and name you just created.  
7. Tab through the options using the Right and Left  
Navigation keys to assign the Phonebook entry Group,  
Graphic, and Alert settings.  
8. To use the entry options, press the Options soft key. The  
following options are available:  
Send message: allows you to send a message to the  
selected number.  
Assign speed dial: allows you to assign a speed dial  
number to the phone number you entered. For more  
Edit number: allows you to edit the number.  
Edit Name: allows you to edit the name.  
Section 6: Understanding Your Phonebook  
57  
Delete entry: allows you to delete the name and number  
from Phonebook. You are asked to confirm that you wish to  
delete the name and number by pressing the Yes soft key.  
Copy to SIM: allows you to copy the number to your SIM  
card.  
9. To return to the Idle screen, press the  
key.  
Storing a Number in the SIM Memory  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to New entry by pressing the Up or Down key and  
press the Select soft key or the  
3. Select the SIM memory location, by pressing the Up or  
Down key and press the Select soft key or the key.  
4. Enter a number you want to store and press the Save  
soft key or the key.  
5. Enter a name and press the OK soft key or the  
key.  
key.  
For further details about how to enter characters, see  
After storing, the phone displays the Phonebook entry  
number you just created.  
6. To use the entry options, press the Options soft key.  
The following options are available:  
Send message: allows you to send a message to the  
selected number.  
Assign speed dial: allows you to assign a speed dial  
number to the phone number you entered. For more  
Edit number: allows you to edit the number.  
58  
 
Dialing a Number from the Phonebook  
Edit Name: allows you to edit the name.  
Delete entry: allows you to delete the name and number  
from Phonebook. You are asked to confirm that you wish to  
delete the name and number by pressing the Yes soft key.  
Copy to phone: allows you to copy the number to your  
phone.  
7. To return to the Idle screen, press the  
key.  
Dialing a Number from the Phonebook  
Once you have stored phone numbers in the Phonebook,  
youcandialthemeasilyandquicklybyusingthelocation  
numbers that were assigned to them in the Phonebook.  
Note: If you cannot remember a location number, you must go into the  
Search menu in the Phonebook menu to search for the entry by name. For  
Dialing a Number from the SIM Card  
1. In Idle mode, enter the location number for the phone  
number you want to dial and press the  
key.  
The location number in the SIM card appears, with the  
desired number displayed.  
2. You can press the Up or Down key to find other  
numbers on the list.  
3. Press the Dial soft key, the  
key, or the  
key when  
you have selected the number you want.  
Speed Dialing  
Once you have stored phone numbers from your  
Phonebook list, you can set up to 8 speed dial entries and  
Section 6: Understanding Your Phonebook  
59  
         
then dial them easily whenever you want, simply by  
pressing and holding the associated numeric key.  
Setting Up Speed Dial Entries  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to Speed Dial by pressing the Up or Down key  
and press the Select soft key or the  
key.  
3. Select the key to which you wish to assign the speed-  
dialing number, from the 2 to 9 keys, and press the  
Select soft key or the  
key.  
Note: Memory location 1 is reserved for your Voice mail server number.  
4. Highlight Edit number and press the Select soft key or  
the  
key.  
5. Enter a number or press the Ph.Book soft key to display  
entries in the Phonebook.  
6. If you pressed the Ph.Book soft key, select an entry from  
the Phonebook list and press the View soft key or the  
key.  
7. Press the OK soft key or the  
key.  
Copying SIM Phonebook Entries to Phone  
You can copy all SIM entries to the Phone using this  
option. When you copy entries to the phone, duplicate  
entries are created.  
1. At the Idle screen, press the Ph. Book soft key.  
2. Highlight Copy all to phone and press the Select soft  
key or the  
key.  
60  
   
Deleting all Phonebook Entries  
3. When you receive the Sure to copy all? message, press  
the Yes soft key or the  
key.  
Note: Options are available for phone entries that are not available when  
stored to the SIM card. For details, see "Storing a Number in the Phone’s  
Deleting all Phonebook Entries  
You can delete all of your entries from your phone’s  
memory, your SIM card, or both.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to Delete all by pressing the Up or Down key and  
press the Select soft key or the  
key.  
3. To place a check mark by the memory location you want  
to empty, All, SIM, or Phone, press the Select soft key or  
the  
You can remove the check mark by pressing the Select  
soft key or the key.  
key.  
4. Press the Delete soft key to delete the entries in the  
selected memory location. A confirmation “Sure to  
delete?” displays. Press Yes to delete or No to cancel.  
Group Settings  
1. At the Idle screen, press the Ph.Book soft key.  
2. Scroll to Group settings by pressing the Up or Down  
key and press the Select soft key or the  
key.  
3. Scroll through the group list by pressing the Up or Down  
key.  
Section 6: Understanding Your Phonebook  
61  
   
4. When the group you want highlights, press the Select  
soft key or the key. You may choose Family, Friends,  
Co-workers, VIPs, or Other.  
5. Select an option and change the settings, as required.  
The following options are available:  
Ringtone: allows you to set the ring tone to be used when  
you receive a voice call from a member of that group.  
Edit Name: allows you to rename the selected group setting.  
View Image: allows you to view the graphic displayed when  
you receive a voice call from a member of that group.  
6. When you are finished, press the C key or the  
key.  
Finding My Own Number  
Thisfunctionisamemoryaid,whichyoucanusetocheck  
your own phone number if you need to do so.  
You can assign a name to each of your own phone  
numbers registered on your SIM card. You can also edit  
the names and numbers. Any changes made here do not  
in any way affect the actual subscriber numbers on your  
SIM card.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Select the Own number option by pressing the Up or  
Down key and press the Select soft key or the  
key.  
3. Select a location and press the Select key or the  
key.  
4. To edit the number, highlight Edit number and press the  
Select soft key or the key. Enter the phone number  
you want and press the OK soft key or the key.  
62  
   
Checking the Memory Status  
5. To edit the name, highlight Edit name and press the  
Select soft key or the  
the OK soft key or the  
key. Enter the name and press  
key.  
6. To delete the number, highlight Delete and press the  
Select soft key or the  
key. Select Yes to confirm  
deletion or No to cancel.  
Checking the Memory Status  
You can check how many names and numbers are stored  
in Phonebook, in both SIM card and the phone memory.  
You can also see the capacity of both memories.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Select the Memory status option by pressing the Up or  
Down key. Press the Select soft key or the  
key.  
3. A total of the numbers stored in the Phone and SIM are  
displayed.  
4. When you are finished, press the C soft key or the  
key.  
Service Dialing Numbers  
You can view the list of Service Dialing Numbers (SDN)  
assigned by your service provider. These numbers  
include emergency numbers, directory enquiries and  
voice mail numbers.  
1. At the Idle screen, press the Ph.Book soft key.  
2. Select the SDN option by pressing the Up or Down key  
and press the Select soft key or the  
key.  
Section 6: Understanding Your Phonebook  
63  
   
3. Scroll through the numbers by using the Up or Down  
key.  
4. To dial the number displayed, press the Select soft key  
or the  
key.  
Note: This function is available only if it is supported by your service  
provider.  
64  
Section 7: Messaging  
Topics Covered  
• Types of Messages  
• Voice Messages  
• Text Messages  
• Picture Messages  
• Browser Messages  
• Voice mail Messages  
• Broadcast Messages  
• Settings  
• Memory Status  
• Instant Messaging  
This section allows you to send or receive different types  
ofmessages.Italsoincludesthefeaturesandfunctionality  
associated with messaging.  
Section 7: Messaging  
65  
   
Types of Messages  
Your phone provides the following message types:  
Voice Messages  
Text Messages  
Picture Messages  
Browser Messages  
Voice Mail Messages  
Broadcast Messages (SIM Dependent)  
Voice messages  
In this menu, you can record a voice message of up to 1  
minute and then immediately send it in an MMS  
(Multimedia Message Service) message. MMS will be  
referred to as Picture Messaging.  
Whenyouaccessthismenu,atimerappearsonthescreen.  
1. Press the Record soft key to start recording.  
2. Record a message by speaking into the microphone.  
The display shows the elapsed time and the remaining  
time simultaneously.  
3. When you are finished, press the Stop soft key or the  
key. Or, when the recording time is expired, the display  
switches to the next screen.  
4. To choose your destination target, highlight one of the  
following options and press the Select soft key or the  
keys:  
66  
       
Voice messages  
Recent log: allows you to select a number or an address  
from the 5 last destinations you entered for sending the last  
messages.  
Phonebook: allows you to retrieve a number from your  
Phonebook.  
Phone number: allows you to enter the phone number you  
want.  
E-mail address: allows you to enter the e-mail address of  
the recipient.  
Note: You can access the following options by pressing the Options soft  
key:  
Replay: plays back your voice message.  
Re-record: discards the voice message and enables you to  
record another one.  
Send: allows you to send the voice message.  
Default destination: allows you to send the voice message  
directly without entering another destination. To select a default  
destination, press the Select soft key and select from the  
available options.  
Save: saves the voice message and continues to the send  
options.  
5. Enter a number or an e-mail address and press the OK  
soft key, or select a destination from the Phonebook.  
6. To select a destination from the Phonebook, highlight  
the desired number and press the Select soft key or the  
key. Press the Send soft key or the key to send  
the message.  
Afteryourmessageissent,itissavedintheOutboxinthe  
Picture messages menu.  
Section 7: Messaging  
67  
Text Messages  
Short Message Service (SMS) allows you to send and  
receive short text messages to and from other mobile  
phones. In addition, your phone supports the Enhanced  
Messaging Service (EMS), which enables you to include  
simple pictures, melodies, and animated images in your  
messages. To use this feature, you must subscribe to your  
service provider’s message service.  
When the Message icon ( ) appears, you have received  
new text messages. When the memory is full, an error  
message displays and you cannot receive any new  
messages. Use the Delete option in each message box to  
delete obsolete messages.  
Create  
In this menu, you can write and send a text message.  
Creating a Simple Text Message  
1. Create your message.  
You can create a message using standard Alphabet  
characters or special Uni-code characters, depending on  
the setting in the Character support menu.  
Notes: For further details about entering characters, see "Using ABC  
You can enter up to 160 standard Alphabet characters in your message.  
When you enter text using Uni-code characters, the maximum number of  
characters that can be in a message is reduced to 70.  
2. When you finish entering your message, press the  
Options soft key. The following options are available:  
68  
     
Text Messages  
Send: allows you to send the message. The message is  
deleted after sending.  
Text formatting: allows you to format the style of the text.  
For the Size attribute, Normal, Large, and Small size are  
available. Mode options are Normal, Underline, and  
Strikethrough. Bold and Italic options are On or Off. Alignment  
options are Left, Center, and Right.  
Add content: allows you to add a picture, melody, or  
animation to your message. Select the category of the item to  
be added. In each category, you can select from the various  
factory-set items or choose an item received from other  
sources, such as the Internet or other phones.  
Note: When you add media items to a message, the number of characters  
you can enter decreases.  
Templates: allows you to apply one of the preset message  
templates to the text. Select one of the 4 items stored in the  
Templates menu.  
Save message: allows you to save a copy of the message  
to the Phone or SIM card.  
3. Select Send and press the Select soft key or the key.  
4. Enter a number and press the OK soft key.  
5. Press the Send soft key or the key.  
Note: When the phone fails to send the message, it asks you if you want to  
retry. Press the No soft key to confirm. Otherwise, press the Retry soft key  
to return to the message screen.  
Inbox  
Thismessageboxisusedtostoremessagesthatyouhave  
received.  
Section 7: Messaging  
69  
When you enter this menu, the list of messages in the box  
displays with the senders’ phone numbers or names, if  
available in your Phonebook.  
1. Select a text message from the list and press the  
Options soft key or the key.  
Options available are:  
View: read the text message.  
Text reply: create a new message to reply with.  
Call back: dials the number that sent the text message.  
Delete: deletes the text message.  
2. Highlight the View option and press the Select soft key  
or the key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
key.  
4. To scroll to the previous or next message, press the Left  
or Right key.  
While reading a message, you can choose the following  
options by pressing the Options soft key:  
Text reply: allows you to send a reply to the sender by sending  
a text message.  
Call back: allows you to call the sender.  
Delete: allows you to delete the message.  
Save address: allows you to extract the sender’s number and  
URL, e-mail addresses or phone numbers from the message  
text, so that you can save them in your phone’s memory.  
Forward: allows you to send/resend the message. For further  
information about how to send a message, see "Create" on  
70  
Text Messages  
Select content: allows you to save media items, such as  
sounds or images, from the message into your phone’s  
memory. You can then use the items when writing a message.  
Move to Phone: allows you to move the message from the SIM  
card to the phone’s memory. This option is only available for  
messages stored in the SIM card.  
Move to SIM: allows you to move the message from the  
phone’s memory to the SIM card. This option is only available  
for messages stored in the phone’s memory.  
Outbox  
This message box isused to store messages that you have  
sent or will send.  
When you enter this menu, the list of messages in the box  
displays with the recipients’ phone numbers or names, if  
available in your Phonebook.  
1. Select a text message from the list and press the  
Options soft key.  
Options available are:  
View: read the text message.  
Delete: deletes the text message.  
Send: send the text message.  
2. Highlight the View option and press the Select soft key  
or the key to read the message contents.  
3. To scroll through the contents, press the Up or Down  
Navigation key.  
4. To scroll to the previous or next message, press the Left  
or Right Navigation key.  
While reading a message, you can choose the following  
options by pressing the Options soft key:  
Section 7: Messaging  
71  
Delete: allows you to delete the message.  
Save address: allows you to extract the destination number  
and URL, e-mail addresses or phone numbers from the  
message text, so that you can save them in your phone’s  
memory.  
Send: allows you to send/resend the message. For further  
information about how to send a message see "Create" on  
Forward: allows you to send/resend the message. For further  
information about how to send a message, see "Create" on  
Move to Phone: allows you to move the message from the SIM  
card to the phone’s memory. This option is only available for  
messages stored in the SIM card.  
Move to SIM: allows you to move the message from the  
phone’s memory to the SIM card. This option is only available  
for messages stored in the phone’s memory.  
Delete All  
This menu allows you to delete all of the text messages in  
eachmessagebox.Youcanalsodeleteallofyourmessages  
at one time.  
1. To select a text message box to clear, press the Up or  
Down key. To delete all of your messages, select All  
messages.  
2. To place or remove a check mark, press Select soft key  
or the key.  
3. Press the Delete soft key to delete the marked objects.  
4. At the Delete? confirmation, press the Yes soft key.  
72  
Picture Messages  
Picture Messages  
This menu allows you to use the Multimedia Message  
Service.  
Picture Messaging is a messaging service that provides  
deliveryofpersonalmultimediamessagesfromphoneto  
phone or from phone to e-mail.  
In addition to the familiar text content of text messages,  
multimedia messages can contain images, graphics,  
voice, and audio clips. A Picture Messaging message is a  
multimedia presentation in a single file. It is not a text file  
with attachments.  
Using the Picture Messaging feature, your phone can  
receive and send messages that contain multimedia files,  
suchasphotos,soundsandimagesyoudownloadedfrom  
the Internet and voice messages you recorded. This  
functionisavailableonlyifitissupportedbyyourservice  
provider. Only phones that offer multimedia messaging  
features can receive and display multimedia messages.  
Create  
This menu allows you to create a new multimedia  
message and send to one or multiple destinations.  
Creating and Sending a Multimedia Message  
1. Highlight Subject and press the Add soft key or the  
key.  
2. Enter the subject of your message and press the OK soft  
key or the key.  
Section 7: Messaging  
73  
     
Note: For more information about entering characters, see "Using ABC  
3. To add a picture, highlight the Picture option and press  
the Add soft key or the key.  
4. Highlight a photo or image and press the Select soft key  
or the key.  
5. After the picture appears, press the Add soft key or the  
key.  
6. To add a sound, highlight the Sound option and press the  
Add soft key or the key.  
7. Highlight one of the following options and press the  
Select soft key or the key.  
Record new: allows you to record a new voice message.  
Voice memos: takes you to the Voice memos folder in your  
Organizer to select a voice memo to add.  
Sounds: allows you to select a sound from your Sounds  
folder.  
8. Highlight a Sound or Voice memo and press the Select  
soft key or the key to add the sound to your message.  
9. To add a message, highlight Message and press the  
Add soft key or the key.  
10. Enter your message and press the Opt. soft key or the  
key.  
11. Highlight the Done option and press the Select soft key  
or the key. You may select the Templates option to  
add pre-defined phrases.  
74  
Picture Messages  
12. Press the Opt. soft key for the following options:  
Send: sends the Picture Messaging message.  
Preview: allows you to see the message before you send.  
Add page: allows you to add another page for the Picture  
Messaging message.  
Page timing: page timing allows you to set how long each  
page of the Picture Messaging is displayed. The default time is  
5 seconds, maximum 99 seconds.  
Text effect: allows you to change the color, size, and style of  
the Picture Messaging text.  
Clear picture/sound/message/subject: allows you to  
remove the selected picture, sound, message, or subject.  
Delete page: allows you to delete the page selected.  
Save message: allows you to save the Picture Messaging  
message.  
To change the text or replace the image or sound with  
another one, select a category and press the Opt. soft  
key. Depending on the category selected, highlight Clear  
picture/sound/message/subject to remove the item.  
13. When you have finished creating the message, press the  
Opt. key and highlight the Send option. Press the Select  
soft key or the key.  
14. Choose one of the following options and press the  
Select soft key or the key:  
Recent log: allows you to select a number or an address  
from the 5 last destinations you entered for sending the last  
messages.  
Phonebook: allows you to enter the phone number you  
want.  
Section 7: Messaging  
75  
Phone number: allows you enter a phone number or  
choose one from the Ph.Book.  
E-mail address: allows you to enter the e-mail address of  
the recipient.  
15. Press the Send soft key to send the message. Your  
phone sends the message.  
Inbox  
Viewing a Message When You Receive It  
When a new multimedia message comes in, the display  
shows the Picture Messaging icon.  
1. Press the View soft key or the key to view your  
message.  
If you want to view the message later in the Inbox, press  
the Exit soft key.  
2. If your message is longer than the display screen, use  
the Up or Down key to scroll through the message. If  
your message has more than one page, use the Left or  
Right key to scroll through the pages.  
3. Press the Opt. soft key or the key to access the  
following options:  
Reply: allows you to create a message and reply to the  
sender.  
Replay: if there are multiple screens to this message, allows  
you to replay the message from the beginning.  
Delete: deletes the message.  
Forward: allows you to forward this message to another  
destination.  
76  
Picture Messages  
Call back: allows you to dial the number from which this  
message was sent.  
Save content: allows you to save the contents of this  
message (picture or sound) to send to another destination in a  
different message.  
Save address: allows you to store the address from which  
this message was sent. You can also reply to the message  
from this option.  
Properties: shows you information about the message, such  
as the time and date the message was received, sender’s  
e-mail address, phone number or name, message size, priority,  
and class.  
4. When you are finished, press the  
key.  
Viewing a Received Message in the Inbox  
When you access the Inbox menu, a list of multimedia  
messages you received displays along with the message  
subjects. The icons on the left tell you the status of the  
messages.  
Picture Messaging notifications that have been opened.  
Picture Messaging notifications that have not been opened.  
1. Select a message on the list and press the Select soft  
key or the key.  
The message displays and scrolls to the next page, if it  
has more than one, after a specified time.  
2. To scroll through the message, press the Up or Down  
Navigation key. If the message has more than one page,  
you can scroll through the pages by using the Left and  
Right Navigation keys.  
Section 7: Messaging  
77  
While viewing a message, you can choose the message  
options by pressing the Opt. soft key.  
Outbox  
When you access this menu, the list of multimedia  
messages that you have sent or saved displays. The icons  
on the left tell you the status of each message:  
Messages sent  
Messages currently being sent  
Messages your phone couldn’t send  
Messages to be sent  
Messages deferred  
1. Select a message on the list and press the Select soft  
key or the key.  
The message displays and scrolls to the next page, if it  
has more than one, after a specified time.  
2. To scroll through the message, press the Up or Down  
Navigation key.  
If the message has more than one page, you can scroll  
through the pages by using the Left and Right  
Navigation keys.  
While viewing a message, you can choose the following  
options by pressing the Opt. soft key:  
Delete: allows you to delete the message.  
Replay: allows you to replay the message from the beginning.  
Send: allows you to send/resend the message.  
78  
Browser Messages  
Properties: shows you information about the message, such as  
the time and date, to (recipient number), size, priority, and  
class.  
Draft  
After creating a multimedia message, you can store it in  
this message box to be sent at a later time. After creating  
your message, select the Save message option.  
Delete All  
This menu allows you to delete all of the multimedia  
messages in each message box separately. You can also  
delete all of your messages at one time.  
1. To select Picture messages to clear, press the Up or  
Down key. To delete all of your messages, select All  
Messages.  
2. To place or remove a check mark, press the Select soft  
key or the key.  
3. Press the Delete soft key to delete the marked objects.  
4. At the Delete? confirmation, press the Yes soft key.  
Browser Messages  
This menu allows you to receive web messages from the  
server, or to set the phone not to receive Web messages.  
The following options are available:  
Inbox: allows you to read the messages received from the web  
server.  
Receive: allows you to set whether or not your phone receives  
web messages.  
Delete all: allows you to delete all of the web messages.  
Section 7: Messaging  
79  
   
Voice Mail Messages  
This menu provides you with a way of accessing your  
voice mailbox, if provided by your network.  
The following options are available:  
Call voice mail: before using the Voice Mail feature, you must  
enter the voice server number obtained from your service  
provider. You can then highlight this option and press the  
Select soft key or the  
key to listen to your messages.  
You can connect to the voice server by pressing and holding the  
1 key in Idle mode.  
Voice server number: allows you to change the voice mail  
server number, if necessary.  
Note: Voice mail is a network feature. Please contact your service provider  
for further details.  
Broadcast Messages (SIM Dependent)  
This network service allows you to receive text messages  
on various topics, such as the weather or traffic.  
Please contact your service provider for further details.  
Settings  
In this menu, you can set up default text message and  
picture message information. The last setting you  
accessed is automatically activated for sending  
subsequent messages.  
Text Messages  
Service center: allows you to store or change the number of  
your message center, which is required when sending  
80  
         
Settings  
messages. You must obtain this number from your service  
provider.  
Validity period (SIM dependent): allows you to set the length  
of time your text messages are stored at the message center  
while attempts are made to deliver them.  
Message type (SIM dependent): allows you to view the type of  
message sent.  
Reply path: allows the recipient of your message to send you a  
reply message using your message center, if your network  
supports this service.  
Delivery report (SIM dependent): allows you to activate or  
deactivate the report function. When this function is activated,  
the network informs you whether or not your message has  
been delivered.  
Character support: allows you to select a character encoding  
type, either GSM-alphabet, Uni-code, or Automatic. If you  
select Automatic, the phone automatically changes the  
encoding type from GSM-alphabet to Uni-code when you enter  
a Uni-code character.  
When you select Uni-code, the maximum number of  
characters that can be in a message is reduced to  
approximately half. If your recipient’s phone does not  
support Uni-code characters, he/she may not be able to  
read your message correctly.  
Note: If your phone doesn’t have the Character support menu, the phone  
provides the Automatic character encoding by default.  
Picture Messages  
The following options are used to set Send and Receive  
settings for Picture messages.  
Section 7: Messaging  
81  
Send Settings  
Priority: you can select the priority level of your messages.  
Validity period: set the length of time your messages are  
stored in the message center while the network attempts to  
deliver them.  
Delivery after: you can set a delay time before the phone sends  
your messages.  
Delivery report: when this option is enabled, the network  
informs you whether or not your message has been delivered.  
Read reply: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
Receive Settings  
Msg. reception: you can set your phone to automatically  
receive incoming messages.  
Ads reject: you can set your phone to automatically reject or  
receive advertising messages.  
Report allowed: you can set the option to receive a delivery  
report.  
Memory Status  
You can check the amount of the memory being used and  
the memory remaining for multimedia messages.  
The display shows the total space including the used and  
freespace.Youcanalsoviewhowmuchspaceiscurrently  
occupied by each message box.  
IM (Instant Messaging)  
Instant Messenger (IM) is a way of sending short, simple  
messages that are delivered immediately to users online  
at that moment.  
82  
       
IM (Instant Messaging)  
Before using this feature, you need to subscribe to a  
messenger service. For further details, contact your  
service provider.  
Starting your IM  
1. Select the messenger service to which you subscribed  
using the Left or Right key and press the Select soft key  
or the key.  
2. Enter your screen name. The name will be displayed on  
other people’s phones or PCs.  
3. Press the Down key and enter your password to connect  
to the service.  
4. Press the Options soft key.  
5. Highlight the Sign On option and press the Select soft  
key or the key to connect to your messenger service.  
Using the IM Options  
On the sign-on screen of your messenger, press the  
Options soft key to access the following options:  
Sign On: allows you to login to your IM account.  
Saved Conversations: shows the records of your connections  
to the messenger service.  
Section 7: Messaging  
83  
84  
Section 8: Changing Your Settings  
Topics Covered  
• Sound Settings  
• Phone Settings  
This section explains the sound and phone settings for  
yourphone.Itincludesdisplaysettings,securitysettings,  
and extra settings associated with your phone.  
Section 8: Changing Your Settings  
85  
   
Sound Settings  
You can customize various sound settings.  
My MegaTones  
This menu allows you to select different ringtone  
melodies that you have downloaded from the Internet.  
Get More MegaTones  
This menu allows you to download different ringtone  
melodies from the Internet. To enable a downloaded  
ringtone, use the My MegaTones option.  
Ringtones  
This menu allows you to select a ring melody.  
You can choose between many different melodies.  
Ring Volume  
This menu allows you to adjust the ring volume to one of  
five levels.  
UsetheUpandDownkeysortheVolume keysontheleft  
side of the phone to increase or decrease the volume.  
Alert Type  
This menu allows you to specify how you are to be  
informed of incoming calls.  
The following options are available:  
Melody: the phone rings using the ring melody selected in the  
Ringtone menu.  
Vibration: the phone vibrates but does not ring.  
86  
     
Sound Settings  
Vibration then melody: the phone first vibrates 3 times and  
then starts ringing using the ring melody selected in the  
Ringtone menu.  
Keypad Tone  
This menu allows you to select the sound that the phone  
will make when you press a key. You may select either  
Tone or Beep.  
To turn off the sound, select Off.  
Message Tone  
This menu allows you to set up the ringer for incoming  
messages, text messages, and multimedia messages.  
Text Message  
This menu allows you to select how the phone informs  
you that a new text message has been received.  
The following options are available:  
Tone: allows you to use one of several message tones.  
Mode: allows you specify how you are informed of any  
incoming messages.  
Silent: only the text notification appears; the phone neither  
rings nor vibrates.  
Tone: the phone rings using the tone selected under the  
Tone option.  
Vibration: the phone vibrates.  
Vibration then tone: the phone vibrates six times then rings  
using the selected tone.  
Repetition: allows you to specify how often the phone informs  
you of a new message. The following options are available:  
Section 8: Changing Your Settings  
87  
   
Once: the phone alerts you to a new message just once at  
the time of receipt.  
Periodic: the phone alerts you to a new message every 2  
minutes until you open the message.  
Picture Message  
This menu allows you to select how the phone informs  
you that a new multimedia message has been received.  
The following options are available:  
Tone: allows you to use one of several message tones.  
Mode: allows you specify how you are informed of any  
incoming messages.  
Silent: only the text notification appears; the phone neither  
rings nor vibrates.  
Tone: the phone rings using the tone selected under the  
Tone option.  
Vibration: the phone vibrates.  
Vibration then tone: the phone vibrates six times then rings  
using the selected tone.  
Repetition: allows you to specify how often the phone informs  
you of a new message. The following options are available:  
Once: the phone alerts you to a new message just once at  
the time of receipt.  
Periodic: the phone alerts you to a new message every 2  
minutes until you open the message.  
Power On/Off  
This menu allows you to select whether or not a melody  
sounds when the phone is switched on and off.  
To turn off the sound, select Off.  
88  
Phone Settings  
Alerts on Call  
Thismenuallowsyoutochoosewhetherornotthephone  
informs you when you receive a new message or when  
the time for an alarm comes during a call.  
The following options are available:  
Off: the phone doesn’t actively alert you to incoming messages  
or alarms. It only displays the corresponding notification.  
On: the phone alerts you with a beep and displays the  
corresponding notification.  
Extra Tones  
You can customize additional tones for the phone.  
1. To turn a given tone on, press the Select soft key or the  
key. A check mark displays in front of the option.  
2. To turn a given tone off, press the Select soft key or the  
key. The check mark no longer displays in front of the  
option.  
The following options are available:  
Indicative tones: sets whether or not the phone informs you  
when you have made a mistake.  
Minute minder: sets whether or not the phone beeps every  
minute during an outgoing call to keep you informed of the  
length of your call.  
Connect tone: sets whether or not the phone beeps when your  
call is connected to the system.  
Phone Settings  
In this menu, you can customize your phone’s various  
settings, such as:  
Section 8: Changing Your Settings  
89  
     
Time and Date  
Display settings  
Get More Help  
Greeting message  
Language  
Security  
Extra settings  
Reset settings  
Network services  
Time & Date  
Thismenuallowsyoutochangethecurrenttimeanddate  
displayed. You can alsofind out what time it is in another  
part of the word.  
The following options are available:  
Set date: allows you to enter the month, day, and year.  
World time: allows you to find out what time it is another part  
of world, using the Left and Right Navigation keys.  
Note: Before setting the time, you must specify your time zone in the  
World time menu.  
The screen shows the:  
city name.  
current time and date.  
city selected as your time zone.  
To select your time zone:  
90  
 
Phone Settings  
1. Select the city corresponding to your time zone by  
pressing the Left or Right key one or more times. The  
local time and date display.  
2. Press the Set soft key or the key.  
Set time: allows you to enter the current time. You can choose  
the time format in the Time format menu.  
Time format: allows you to change the time format to 12 hours  
or 24 hours.  
Auto update: allows you to receive time information from your  
service provider’s network.  
Off: you need to manually set the time and date according to  
the current time zone using the Set time menu (Menu 9.1.3).  
On: the phone automatically updates the time and date  
according to the current time zone using the network  
service.  
Confirm first: the phone asks for a confirmation before the  
update.  
Note: Automatic updates of time and date do not change the time you have  
set for alarm settings or calendar memos.  
Display Settings  
In this menu, you can change various settings for the  
display or backlight.  
Wallpaper  
Thismenuallowsyoutochangethebackgroundimageor  
the color of the text to be displayed in Idle mode.  
The following options are available:  
Section 8: Changing Your Settings  
91  
 
Animations: you can select a background animation to be  
displayed on the idle screen.  
Get More Wallpapers: you can also select any images  
downloaded from the Internet, t-zonesSM browser, optional  
EasyGPRS program, or received in messages.  
Images: you can select a background image to be displayed on  
the idle screen.  
Text color: you can select the color of the text to be displayed  
on the idle screen.  
If you selected Animations:  
1. Scroll through the list by pressing the Left or Right key.  
You have various preset images available.  
2. Press the Select soft key or the key when the image  
you want is displayed.  
If you selected Images:  
1. Scroll through the list by pressing the Up or Down key.  
You have various preset images available.  
2. Highlight an image name and press the View soft key or  
the key.  
3. When the image displays, press the Select soft key or  
the key to display it on the idle screen.  
Or, you may press the Left or Right key to view other  
images.  
Interior Display  
This menu allows you to select the menu display style.  
YoucanchooseeitherPattern1orPattern2.Highlightthe  
optionyouwantandpresstheSelectsoftkeyorthe key.  
92  
Phone Settings  
Back Light  
In this menu, you can select the length of time the  
backlight is on and the phone is in Dimming mode.  
Settings available are: 15 seconds, 30 seconds, 1 minute,  
3 minutes, and 10 minutes.  
Brightness Control  
You can adjust the display brightness to see it better in  
different lighting conditions.  
Select either Main LCD or Front LCD. Press the Up or  
Down key or press the Volume keys to adjust the  
brightness.  
Dialing Font Color  
This menu allows you to select the color of your dialing  
font. You can choose either Black or Rainbow. Highlight  
theoptionyouwantandpresstheSelectsoftkeyorthe  
key.  
Get More Help  
This menu provides accesstoonline help for your phone.  
You may browse general help topics, or enter specific  
search topics. Information located on this site is  
maintained by T-Mobile.  
Greeting Message  
Thismenuallowsyoutosetatextgreetingtobedisplayed  
briefly when the phone is switched on.  
For details about entering characters, see "Using ABC  
Section 8: Changing Your Settings  
93  
       
Language  
You can select a display language.  
The following options are available:  
Text language (SIM dependent): you can set the text language  
to English, French, or Spanish.  
Input mode: you can set the Input mode language to English,  
French, or Spanish.  
Security  
TheSecurityfeatureenablesyoutorestricttheuseofyour  
phone by others and to restrict the types of calls.  
Various codes and passwords are used to protect the  
features of your phone.  
PIN Check  
When the PIN Check feature is enabled, you must enter  
your PIN each time you switch on the phone.  
Consequently, any person who does not have your PIN  
cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the network when you  
switch it on.  
Enable: you must enter the PIN each time the phone is  
switched on.  
94  
     
Phone Settings  
Change PIN  
This feature allows you to change your current PIN,  
providedthatthePINCheckfeatureisenabled.Youmust  
enter the current PIN before you can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone Lock  
When the Phone Lock feature is enabled, the phone is  
locked and you must enter the 4- to 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the factory. To  
change the phone password, see "Change Password" on  
Once the correct password has been entered, you can use  
the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone password when  
you switch on the phone.  
Enable: you are required to enter the phone password when  
you switch on the phone.  
Change Password  
The Change Passwordfeature allows you to change your  
currentphonepasswordtoanewone. Youmustenterthe  
current password before you can specify a new one.  
The password is preset to “00000000” at the factory. Once  
you have entered a new password, you are asked to  
confirm it by entering it again.  
Section 8: Changing Your Settings  
95  
   
Privacy  
Using this menu, you can lock your media contents, such  
as picture messages, voice messages, voice memos,  
images, and sounds. Once you have locked the contents,  
you must enter the phone’s password to access the  
associated menus.  
1. To select an item to lock, press the Up or Down key to  
highlight the item you want to lock. To lock all of the  
contents, highlight All.  
2. To place a check mark, press the Select soft key or the  
key.  
3. To remove a check mark, press the Select soft key or the  
key.  
4. To lock the marked items, press the OK soft key.  
5. Enter a password and press the OK key.  
When the phone asks for the password, enter the  
password and press the OK soft key or the key.  
Note:Thepasswordispresetto00000000atthefactory.  
Tochangethispassword,see"ChangePassword"onpage  
FDN Mode  
FDN (Fixed Dial Number) mode, if supported by your  
SIM card, allows you to restrict your outgoing calls to a  
limited set of phone numbers.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in Phonebook.  
You must enter your PIN2. The following options are available:  
96  
Phone Settings  
Full length entries or wild cards can be entered in to the FDN  
list.  
A full length number with a specific contact name can be  
entered into the FDN list.  
Wildcard entries allow a range of numbers to be dialed with  
a single entry: ex. 555 – All dialed numbers that begin with  
555 will be allowed. Numbers that do not match the  
conditions in the FDN list will be restricted. Note: Entering  
an asterisk (*) is not required for wild card entries.  
Change PIN2  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the current  
PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by  
entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu  
does not display.  
Extra Settings  
You can turn the automatic redialing or answering  
features on or off.  
1. To turn a feature on, press the Select soft key or the  
key. A check mark displays in front of the option.  
2. To turn a feature off, press the Select soft key or the  
key. The check mark no longer displays.  
The following options are available:  
Note: The interval between call attempts varies.  
Section 8: Changing Your Settings  
97  
 
Auto redial: when this option is checked, the phone makes up  
to ten attempts to redial a phone number after an unsuccessful  
call.  
Active Flip: when this option is checked, you can simply open  
the phone to answer a call. When it is unchecked, you must  
open the phone and press a key to answer a call, depending on  
the setting of the Anykey answer option. See below.  
Anykey answer: when this option is checked, you can answer  
an incoming call by pressing any key, except the  
key or the  
key or the  
Reject soft key. To reject the call, press the  
Reject soft key. When this option is unchecked, you must press  
the  
key or Accept soft key to answer a call.  
Reset Settings  
You can easily reset your phone to its default settings.  
The following options are available:  
Sound settings: you can reset all sound settings to the default  
settings.  
Phone settings: you can reset all phone settings to the default  
settings.  
All settings: all settings are changed to the default settings.  
To reset your phone:  
1. Make a selection of the settings you wish to reset. At the  
Confirm screen, press the Yes soft key or the key.  
Otherwise, press the No soft key and you will be  
returned to the previous screen.  
Enterthe4-to8-digitpasswordandpresstheOKsoftkey  
or the key.  
The password is preset to “00000000.” To change this  
98  
Phone Settings  
Network Services  
The Network Services feature allows you to set up the  
network functions supported by your carrier. Some of  
these services may not be available due to coverage area  
orserviceplans.Ifyouhaveanyquestions,pleasecontact  
the Customer Support center.  
Call Forwarding  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to forward your business calls to a colleague while  
you are on holiday.  
To set your call forwarding options:  
1. Select a call forwarding option by pressing the Up or  
Down key and then press the Select soft key or the  
key.  
The following options are available:  
Forward always: all calls are forwarded.  
Busy: calls are forwarded when you are already on another  
call.  
No reply: calls are forwarded when you do not answer the  
phone.  
Unreachable: calls are forwarded when you are not in an  
area covered by your service provider or when your phone is  
switched off.  
Cancel all: all call forwarding options are canceled.  
2. Select the type of calls, voice or data, by pressing the Up  
or Down key, and then press the Select soft key or the  
key.  
Section 8: Changing Your Settings  
99  
 
The current status displays. If the option has already  
been set, the number to which the calls are forwarded  
displays.  
3. To activate call forwarding, press the Activate soft key.  
Go to step 6.  
4. To change the number to be called, press the Change  
soft key. Go to step 6.  
5. To deactivate call forwarding, press the Remove soft  
key.  
6. Enter the number to which the calls are to be forwarded  
and press the OK soft key or the key.  
To enter an international code, press and hold the 0 key  
until the + sign displays.  
7. When you select No reply in step 1, select the length of  
time the network waits for before forwarding a call.  
The phone sends your settings to the network and the  
network’s acknowledgement displays.  
Call Waiting  
Thisnetworkserviceinformsyouwhensomeoneistrying  
to reach you during another call.  
You can specify individual call waiting options for voice  
calls and/or data calls.  
To set your call waiting options:  
1. Select the type of calls, voice or data, to which the call  
waiting option is to be applied by pressing the Up or  
Down key and then press the Select soft key or the  
key.  
100  
 
Phone Settings  
The screen informs you whether call waiting is activated  
or deactivated.  
2. You can activate or deactivate the Call Waiting feature  
using the Activate or Deactivate soft key respectively.  
3. To return to the previous screen, press the Exit soft key.  
Network Selection  
The Network Selection feature enables you to  
automatically or manually select the network used when  
roaming outside of your home area.  
Note: You can select a network other than your home network only if there  
is a valid roaming agreement between the two.  
To change the Network Selection mode:  
1. Highlight the Default setup option then press the Select  
soft key or the key.  
If you select Automatic, you are connected to the first  
available network when roaming.  
If you select Manual, go to step 2.  
2. After scanning the network, the phone will display  
available networks. Highlight the network that you want  
by pressing the Up or Down key and then press the  
Select soft key or the key.  
The phone will scan for that network and you will be  
connected.  
Caller ID  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Section 8: Changing Your Settings  
101  
   
Note: Some networks do not allow you to change this setting.  
The following options are available:  
Default: the default setting provided by the network is used.  
Hide number: your number does not display on the other  
person’s phone.  
Send number: your number is sent each time you make a call.  
Band Selection  
This menu option provides the ability to set the band for  
your phone. Choose from GSM 850/1900, GSM 1800, or  
Automatic.  
102  
Section 9: Organizer  
Topics Covered  
• Alarm  
• Calendar  
• Calculator  
• To Do List  
• Voice memo  
• Conversion  
• Timer  
• Stopwatch  
The topics covered in this section allow you to set an  
alarm, schedule appointments, view the calendar,  
performsimplemathcalculations,createTo-Dolists,send  
a voice memo, set a timer, and use a stopwatch.  
Section 9: Organizer  
103  
   
Alarm  
This feature allows you to:  
set the alarm to ring at a specific time.  
set the phone to switch on automatically and ring the alarm  
even if the phone is switched off.  
The following options are available:  
Wake-up Call: the alarm rings to wake you up in the morning.  
Alarm1: set the day, time, and tone for this alarm.  
Alarm2: set the day, time, and tone for this alarm.  
Auto power: alarm rings at the specified time even if the phone  
is turned off. If the option is set to Off and the phone is  
switched off at the specified time, the alarm does not ring.  
To set the alarm:  
1. Choose the type of alarm to be set and press the Select  
soft key or the key.  
2. Press the Options soft key to choose from the following  
options:  
Alarm day: select the days of the week for the alarm.  
Alarm time: enter the time for the alarm.  
Alarm tone: select an alarm melody.  
Remove alarm: removes the set alarm.  
3. Highlight Alarm day and press Select soft key or the  
key. Select the days that you want the alarm to sound  
using the Select soft key. Press the OK soft key to save.  
104  
   
Calendar  
4. Highlight the Alarm time and press the Select soft key  
or the key. Enter the time and press the OK soft key or  
the key. Select AM or PM and press the Select soft  
key or key.  
5. Highlight Alarm tone and press the Select soft key or  
the key. Highlight your choice and press the Select  
soft key or the key.  
6. Press the  
key to return to Idle mode.  
Note: Your phone is preset to a 12-hour format. To change the time  
7. To stop the alarm when it rings, open the phone and  
press the Confirm soft key, Volume keys, C key, key,  
or  
key.  
Calendar  
With the Calendar feature, you can:  
consult the calendar and check your memos.  
write memos to keep track of your schedule.  
set an alarm to act as a reminder, if necessary.  
Consulting the Calendar  
When you select the Calendar menu, the calendar  
displays with today’s date highlighted. The following  
options are available when you press the Options soft  
key:  
Add memo: allows you to write a memo and save it to the  
scheduler, to do list, call, or anniversary list.  
Section 9: Organizer  
105  
   
Go to date: allows you to jump to a specific date.  
View all: displays all memos set, starting with the oldest,  
regardless of the day. To scroll through the memos, press the  
Up or Down key.  
Delete day: allows you to delete all memo’s for the specified  
day.  
Delete all: allows you to delete all of the memos. You are asked  
to confirm your action.  
Writing a Memo  
You can make up to 100 memos for the calendar. More  
than one memo can be made for one day.  
To write or edit a memo on a specific date:  
1. Select a date on the calendar, using the Navigation keys.  
2. Press the Select soft key or the key.  
An empty memo screen displays to allow you to enter  
your memo.  
3. Enter your memo and then press the OK soft key or the  
key.  
Note: For further details about how to enter characters, see "Using ABC  
4. Choose from the following Save to options:  
Scheduler: saves the memo to the Scheduler.  
To do list: saves the memo to the To do list.  
Call: saves the memo to your Call list.  
Anniversary: saves the memo to your Anniversary list.  
106  
 
Calendar  
5. If you saved to Scheduler or To do list, the Memo time  
menu will appear. Enter the time you wish. The time will  
default to the present time. Press the OK soft key or the  
key.  
6. If applicable, select the AM or PM option and press the  
Select soft key or the key.  
7. You are asked if you wish to set an alarm. If you want the  
alarm to ring on the chosen day, press the Yes soft key  
or the key.  
Otherwise, press the No soft key. The memo is saved.  
8. If you pressed the Yes soft key or the key, set the  
time for the alarm and press the OK soft key or the  
key.  
Notes: Your phone is preset to a 12-hour format. To change the time  
When the alarm time you set occurs, the alarm rings. To view details about  
the memo, press the View soft key or the key. To stop the alarm, press  
the Exit soft key, or the  
key.  
9. If applicable, select the AM or PM option and press the  
Select soft key or the key.  
10. Select an alarm tone for the alarm and press the Select  
soft key.  
The color of the date on the calendar changes to pink to  
indicate that a memo exists for that date.  
Viewing a Memo  
When you select a day on which more than one memo  
exists, the latest memo for the day displays.  
Section 9: Organizer  
107  
 
In that case, press the Left or Right key to scroll to the  
previous or next memo.  
You can access the following options by pressing the  
Options soft key:  
Add: allows you to add a new memo for the day.  
Delete: deletes the memo.  
Edit: allows you to change the memo text.  
Move: allows you to change the time or date of the memo.  
Copy: allows you to copy the memo to another date or time.  
Calculator  
With this feature, you can use the phone as a calculator.  
The calculator provides the basic arithmetic functions;  
addition, subtraction, multiplication, and division.  
1. Enter the first number using the numeric keys.  
2. Enter the operation for your calculation by pressing the  
key according to the illustration on the display. The  
key is used for the decimal.  
3. Enter the second number.  
4. To view the result, press the key or the = soft key.  
Repeat steps 1 through 4 as many times as required.  
To Do List  
This feature allows you to:  
enter a list of tasks to be done.  
Creating the To Do List  
1. Select the To do list option and press the Select soft key  
108  
       
To Do List  
or the key.  
2. Enter the first task and press the OK soft key or the  
key.  
Note: For further details about how to enter characters, see "Using ABC  
3. Select a date on the calendar using the Navigation keys  
and press the Select soft key or the key.  
4. Enter a time and press the OK soft key or the key.  
5. Highlight AM or PM and press the Select soft key or the  
key.  
6. At the Set alarm? prompt, press the Yes soft key to set  
an alarm. Otherwise, press the No soft key.  
7. If you pressed Yes to set an alarm, enter the time, AM or  
PM, and the alarm tone.  
8. Your To do list will be displayed with the task you just  
entered.  
9. To exit, press the  
key.  
Editing the To Do List  
When you select the To do list menu option, the current  
contents display with a status mark, if the task has been  
done , or is undone  
.
1. Highlight the task that you wish to edit and press the  
Select soft key or key.To change the status of a task,  
press the Options soft key and use the Up and Down  
keys to select the Mark option. Then press the Select  
soft key or key.  
Section 9: Organizer  
109  
2. Use the Up or Down Navigation key to mark the task as  
Done or Undo.  
By pressing the Options soft key or the key on the list  
or the task view, you can access the following options:  
Add: allows you to create a new task.  
Mark: allows you to change the status of the current task to  
either Done or Undo.  
Edit: allows you to change the text.  
Move: allows you to move the task to another date.  
Copy: makes a copy of the current task.  
Delete: deletes the current task.  
Delete all: allows you to delete all of the tasks.  
Voice Memo  
You can record voice memos. After recording, you can  
send the memo to other people via the Multimedia  
Message Service.  
Record Voice  
This menu allows you to record a new memo. Recording  
time is limited to free memory space available.  
1. To start recording, press the Select soft key or the  
key.  
2. Record a memo by speaking into the microphone.  
3. Press the Select soft key or the key to stop the  
recording.  
4. Press the Options soft key to display the following  
options:  
110  
     
Voice Memo  
Send: send the voice memo by Picture Messaging.  
Rename: change the name of the voice memo.  
Delete: delete the voice memo.  
Properties: view the properties of the voice memo.  
5. To exit, press the key.  
Voice Memos  
This menu shows a list of saved voice memos. Scroll to a  
memoandpresstheSelectsoftkey. Thevoicememowill  
play. Press the Options soft key. The following options  
are available:  
Send: allows you to send the memo to other people by using  
the Picture Messaging feature. See "Creating and Sending a  
Multimedia Message" on page 73 for further details about  
sending a message.  
Rename: allows you to change the memo’s name.  
Delete: allows you to delete the memo.  
Properties: displays information about the memo, such as the  
name, size, and format.  
Delete All  
In this menu, you can delete all of your voice memos.  
When the confirmation message appears, press the Yes  
soft key. To cancel the deletion, press the No soft key.  
Settings  
In this menu, you can view and set the settings for your  
voice memos. The following options are available:  
Recording time: allows you to set the recording time to Normal  
or Limit size (for Picture Messaging).  
Section 9: Organizer  
111  
 
Volume: allows you to set the default volume for the recording.  
Default name: allows you to set the default name for the  
recordings.  
Memory Status  
You can check the amount of memory being used and the  
memory remaining for voice memos.  
The display shows you the total, used, and free memory,  
including the number of memos you have stored and the  
total number of memos you can store.  
Conversion  
The conversion menu provides the following conversion  
categories:  
Length  
Weight  
Volume  
Area  
Temperature  
Timer  
You can use this menu to set a timer. To enable the Timer,  
use the following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
3. Press the Start soft key to start the timer. Press the Stop  
soft key to stop the timer.  
112  
       
Stopwatch  
4. To stop the alarm, press the soft key, the C key, or the  
key.  
Stopwatch  
You can use this menu to access the Stopwatch feature.  
To enable the Stopwatch:  
1. Press the OK soft key to start the stopwatch.  
2. After starting the stopwatch, you may press the OK soft  
key up to four times to have four different times  
displayed. This may be used as a lap counter. The time  
displayed at the top of the display is cumulative.  
3. Press the Reset soft key to reset all times to zero.  
Section 9: Organizer  
113  
   
114  
Section 10: Funbox  
Topics Covered  
• t-zones  
• Sounds  
• Images  
• Games  
• Delete All  
• Memory Status  
The Funbox menu contains menus to download games,  
sounds, and images.  
Section 10: Funbox  
115  
 
t-zones  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access and  
navigate the Wireless Web using your phone. For more  
Sounds  
Inthismenu,youcanviewthelistofsoundsdownloaded  
fromthe web serveror received in multimediamessages.  
You can set a downloaded sound as the current ring tone.  
By pressing the Options soft key or the key, you can  
access the following options:  
Set as ring tone: allows you to set the sound as your ring tone.  
Rename: allows you to change the name of the sound.  
Delete: allows you to delete the sound.  
Properties: displays the melody name, size, format and  
copyright information.  
UsingtheGetMoreMegaTonesoptiononthesoundslist,  
you can access the web site preset by T-Mobile and  
download new sounds.  
Using the Get More HiFi Ringers option on the sounds  
list, you can access the web site preset by T-Mobile and  
download new HiFi Ringers.  
116  
       
Images  
Images  
Inthismenu,youcanviewthelistofimagesdownloaded  
from the web server or received in messages. You can set  
a downloaded image as the current background image.  
Scroll to the image you want to view and press the View  
soft key or the key.  
By pressing the Options soft key or the key, you can  
access the following options:  
Send: allows you to send the image to a phone number or an  
email address.  
Set as wallpaper: allows you to set the image as your  
wallpaper for the idle screen.  
Rename: allows you to change the name of the image.  
Delete: allows you to delete the image.  
Properties: displays the image name, size, resolution, and  
copyright information.  
UsingtheGetMoreWallpapersoptionontheimageslist,  
you can access the web site preset by T-Mobile and  
download new images. Scroll to the Get More  
Wallpapers option and press the Connect soft key or the  
key.  
Games  
YoucandownloadMIDlets(Javaapplicationsthatrunon  
mobile phones) from various sources using the t-zones  
browser and store them in your phone.  
When you access the Games menu, the list of default  
games appears. Once you have downloaded games, they  
are added to the list.  
Section 10: Funbox  
117  
     
Note: Java services may not be available, depending on your service plan  
and phone model.  
Downloading a New Game  
You can download more games from the web site preset  
by T-Mobile using the Get More Games option. Scroll to  
the Get More Games option and press the Connect soft  
key or the key.  
Launching a MIDlet  
Note: The procedure explained below is for the default games. For  
downloaded games, the procedure may be different.  
1. Scroll to the MIDlet you want on the Games list and press  
the Options soft key.  
2. Highlight Launch and press the Select soft key or the  
key.  
3. On the startup screen of the MIDlet, scroll to an option  
using the Navigation keys.  
Note: The options for each game vary depending on the game.  
4. Press the key to confirm your selection.  
Viewing MIDlet Information  
1. Scroll to the MIDlet you want and press the Options soft  
key.  
2. Highlight the Properties option and press the Select soft  
key or the key.  
118  
Games  
The display shows information about the MIDlet, such as  
the file size, application version, and its vendor.  
3. To scroll to other MIDlet information, press the  
Navigation keys.  
4. If you want to delete a MIDlet, press the Delete soft key  
and then press the Yes soft key or the key to confirm  
the deletion.  
Note: When you select default games from the list, the Delete option is not  
available.  
5. To exit and return to the Games list, press the Right soft  
key or the C key.  
Entering text  
If you need to enter text while using a MIDlet, you can  
access the following input modes:  
Upper-case character mode (A): allows you to enter  
upper-case English characters.  
Lower-case character mode (a): allows you to enter  
lower-case English characters.  
Number mode (1): allows you to enter numbers.  
Symbol mode: allows you to enter symbols. After  
highlighting a symbol by pressing the Navigation keys,  
press the key to insert it.  
T9 mode (T9): allows you to enter English characters by  
pressing one key per letter. In this mode, you can change  
the case by pressing the 0 key.  
Section 10: Funbox  
119  
To change the text input mode, press the key until the  
appropriate indicator appears on the soft key area of the  
display.  
Delete All  
This menu allows you to delete all of the downloaded  
items in the Sounds and Images folders separately.  
1. Using the Up or Down key, select a folder to clear and  
press the Select soft key or the key.  
2. To delete the items, press the Yes soft key or the key  
at the Delete? prompt. Otherwise, press the No soft key.  
Memory Status  
You can check the amount of memory being used and  
memory remaining for games, picture messages, and  
Media box.  
120  
   
Section 11: t-zones  
Topics Covered  
• t-zones  
This section outlines the t-zones service on your phone.  
For more information, contact T-Mobile.  
Section 11: t-zones  
121  
   
t-zones  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access and  
navigate the Wireless Web using your phone.  
Home  
Selecting this menu connects the phone to the network  
and loads the t-zones homepage of the Wireless Web  
service provider. You can also press the key in Idle  
mode to launch the t-zones browser.  
The content of the t-zones browser startup homepage  
depends on your Wireless Webserviceprovider. Toscroll  
through the screen, use the Up and Down keys.  
To go to the startup homepage from any other screen in  
the t-zones browser, use the Home option. For more  
informationonthet-zonesbrowsermenus,see"Selecting  
Exiting the t-zones Browser  
To exit the browser at any time, simply press the  
key.  
Navigating the t-zones Browser  
1. To scroll through browser items, press the Up or Down  
key.  
2. To select browser items, press the Select soft key.  
3. To return to the previous page, press the Back soft key or  
the C key. The Back soft key does not appear until you  
have scrolled to the end of the browser items.  
122  
       
t-zones  
Entering Text in the t-zones Browser  
Whenyouarepromptedtoentertext, thecurrentlyactive  
text input mode is indicated on the screen.  
The following modes are available:  
Upper-case character mode (A): allows you to enter  
upper-case English characters.  
Lower-case character mode (a): allows you to enter  
lower-case English characters.  
You can enter symbols in upper or lower-case character  
mode by pressing the 1 key.  
Number mode (1): allows you to enter numbers.  
To change the text input mode, press the  
To enter a space, press the key.  
key.  
To edit text, set the cursor to the right of the character(s) to be  
corrected.  
Press the C key as required.  
Enter the correct character(s).  
Selecting and Using Menu Options  
Various menus are available when you are using the t-  
zones browser to navigate the Wireless Web.  
To access a menu option:  
1. Highlight the t-zones browser icon and press the Select  
soft key. A browser menu displays.  
2. Highlight an option using the Up and Down keys then  
press the Select soft key or the key.  
Section 11: t-zones  
123  
   
Note: The menus may vary, depending on your version of the t-zones  
browser.  
The following options are available:  
Go to URL: allows you to manually enter the URL address of a  
Web page. After entering an address, press the OK soft key or  
key to go there directly.  
Favorites: shows the bookmarks list. You can bookmark the  
current web page or access previously bookmarked pages.  
Text messages: allows you to create a text message or check  
your Inbox or Outbox.  
Funbox: allows you to see the sounds and images stored on  
your phone.  
Home: takes you back at any time to the home page of the  
Wireless Web service provider.  
Back: takes you back to the previous web browser screen.  
Show URL: displays the URL address of the Web page to which  
you are currently connected. It also enables you to set the  
current site as the startup home page.  
Reload: reloads the current page.  
Favorites  
This menu stores up to 15 URL addresses.  
To store a URL address:  
1. Select an empty location and press the Select soft key or  
the key.  
2. Enter the address and press the OK soft key or the  
key.  
124  
t-zones  
Note: For further details about how to enter characters, see "Using ABC  
3. Enter a name for the favorite item and press the OK soft  
key or the key.  
After saving a favorite item, you can select the item and  
access the following options by pressing the Select soft  
key or the key:  
Go: takes you to the site.  
Edit: allows you to edit the address.  
Delete: allows you to delete the address.  
Go to URL  
ThismenuallowsyoutomanuallyentertheURLaddress  
ofawebsitethatyouwishtoaccess.Entertheaddressand  
press the OK soft key or the key.  
Forfurtherdetailsaboutenteringcharacters, see"Section  
Clear Cache  
Youcancleartheinformationstoredinthecache,whichis  
the phone’s temporary memory which stores the most  
recently accessed Web pages.  
Press the Yes soft key at the Sure to clear? prompt to  
confirm the deletion. Otherwise, press the No soft key.  
Section 11: t-zones  
125  
126  
Section 12: Health and Safety  
Information  
Topics Covered  
• Health and Safety Information  
• Consumer Information on Wireless Phones  
• Road Safety  
• Operating Environment  
• Using Your Phone Near Other Electronic Devices  
• Potentially Explosive Environments  
• Emergency Calls  
• FCC Notice and Cautions  
• Other Important Safety Information  
• Product Performance  
• Availability Of Various Features/Ring Tones  
• Battery Standby and Talk Time  
• Battery Precautions  
• Care and Maintenance  
This section outlines the safety precautions associated  
with using your phone. These safety precautions should  
be followed to safely use your phone.  
Section 12: Health and Safety Information  
127  
   
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It  
isdesignedandmanufacturednottoexceedtheexposure  
limits for radio frequency (RF) energy set by the Federal  
Communications Commission (FCC) of the U.S.  
government.TheseFCCexposurelimitsarederivedfrom  
the recommendations of two expert organizations, the  
National Counsel on Radiation Protection and  
Measurement (NCRP) and the Institute of Electrical and  
Electronics Engineers (IEEE). In both cases, the  
recommendations were developed by scientific and  
engineering experts drawn from industry, government,  
and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile  
phones employs a unit of measurement known as the  
Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body  
expressedinunitsofwattsperkilogram(W/kg).TheFCC  
requires wireless phones to comply with a safety limit of  
1.6 watts per kilogram (1.6 W/kg). The FCC exposure  
limit incorporates a substantial margin of safety to give  
additional protection to the public and to account for any  
variations in measurements.  
128  
 
Health and Safety Information  
SAR tests are conducted using standard operating  
positions accepted by the FCC with the phone  
transmitting at its highest certified power level in all  
testedfrequencybands.AlthoughtheSARisdetermined  
at the highest certified power level, the actual SAR level  
of the phone while operating can be well below the  
maximumvalue.Thisisbecausethephoneisdesignedto  
operate at multiple power levels so as to use only the  
power required to reach the network. In general, the  
closeryouaretoawirelessbasestationantenna,thelower  
the power output.  
Before a new model phone is available for sale to the  
public, it must be tested and certified to the FCC that it  
does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in  
positions and locations (e.g. at the ear and worn on the  
body) as required by the FCC. Body-worn operations are  
restricted to Samsung-supplied, approved, or non-  
Samsung designated accessories that have no metal and  
must provide at least 1.3 cm separation between the  
device, including its antenna (whether extended or  
retracted) and the user's body. Non-compliance with the  
above restrictions may result in violation of FCC RF  
exposure guidelines.  
The FCC has granted an Equipment Authorization for  
thismobile phonewithallreportedSAR levels evaluated  
as in compliance with the FCC RF exposure guidelines.  
The maximum SAR values for this model phone as  
reported to the FCC are:  
Section 12: Health and Safety Information  
129  
Head: 1.36 W/Kg.  
Body-worn: 0.727 W/Kg.  
SAR information on this and other model phones can be  
viewed on-line at www.fcc.gov/oet/fccid. To find  
information that pertains to a particular model phone,  
this site uses the phone FCC ID number which is usually  
printed somewhere on the case of the phone. Sometimes  
it may benecessary toremove the battery pack to find the  
number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website  
anditshouldprovidevaluesfortypicalormaximumSAR  
for a particular phone. Additional product specific SAR  
information can also be obtained at www.fcc.gov/cgb/  
sar.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has  
published a series of Questions and Answers for  
consumers relating to radio frequency (RF) exposure  
from wireless phones. The FDA publication includes the  
following information:  
What kinds of phones are the subject of this update?  
Thetermwirelessphonerefersheretohand-heldwireless  
phones with built-in antennas, often called "cell,"  
"mobile,"or"PCS"phones.Thesetypesofwirelessphones  
canexposetheusertomeasurableradiofrequencyenergy  
(RF)becauseoftheshortdistancebetweenthephoneand  
theuser'shead.TheseRFexposuresarelimitedbyFederal  
Communications Commission safety guidelines that  
weredevelopedwiththeadviceofFDAandotherfederal  
health and safety agencies. When the phone is located at  
130  
 
Consumer Information on Wireless Phones  
greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure  
decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a  
base unit connected to the telephone wiring in a house,  
typically operate at far lower power levels, and thus  
produceRFexposureswellwithintheFCC'scompliance  
limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any  
health problems are associated with using wireless  
phones. There is no proof, however, that wireless phones  
are absolutely safe. Wireless phones emit low levels of  
radio frequency energy (RF) in the microwave range  
while being used. They also emit very low levels of RF  
wheninthestand-bymode.WhereashighlevelsofRFcan  
producehealtheffects(byheatingtissue),exposuretolow  
level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level  
RFexposureshavenotfoundanybiologicaleffects.Some  
studies have suggested that some biological effects may  
occur, but such findings have not been confirmed by  
additionalresearch.Insomecases,otherresearchershave  
had difficulty in reproducing those studies, or in  
determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of  
radiation-emitting consumer products such as wireless  
phones before they can be sold, as it does with new drugs  
Section 12: Health and Safety Information  
131  
ormedicaldevices. However,theagencyhasauthorityto  
take action if wireless phones are shown to emit radio  
frequency energy (RF) at a level that is hazardous to the  
user.Insuchacase,FDAcouldrequirethemanufacturers  
ofwirelessphonestonotifyusersofthehealthhazardand  
torepair,replaceorrecallthephonessothatthehazardno  
longer exists.  
Although the existing scientific data do not justify FDA  
regulatory actions, FDA has urged the wireless phone  
industry to take a number of steps, including the  
following:  
Support needed research into possible biological effects of RF  
of the type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF  
exposure to the user that is not necessary for device function;  
and  
Cooperate in providing users of wireless phones with the best  
possible information on possible effects of wireless phone use  
on human health.  
FDA belongs to an interagency working group of the  
federal agencies that have responsibility for different  
aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this  
working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
132  
Consumer Information on Wireless Phones  
The National Institutes of Health participates in some  
interagency working group activities, as well.  
FDA shares regulatory responsibilities for wireless  
phones with the Federal Communications Commission  
(FCC). All phones that are sold in the United States must  
comply with FCC safety guidelines that limit RF  
exposure. FCC relies on FDA and other health agencies  
for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless  
phone networks rely upon. While these base stations  
operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these  
base stations are typically thousands of times lower than  
thosetheycangetfromwirelessphones. Basestationsare  
thus not the primary subject of the safety questions  
discussed in this document.  
What are the results of the research done already?  
The research done thus far has produced conflicting  
results, and many studies have suffered from flaws in  
their research methods. Animal experiments  
investigating the effects of radio frequency energy (RF)  
exposures characteristic of wireless phones have yielded  
conflicting results that often cannot be repeated in other  
laboratories. A few animal studies, however, have  
suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However,  
many of the studies that showed increased tumor  
development used animals that had been genetically  
engineeredortreatedwithcancer-causingchemicalssoas  
to be pre-disposed to develop cancer in absence of RF  
exposure. Other studiesexposed theanimals toRF for up  
Section 12: Health and Safety Information  
133  
to22hoursperday.Theseconditionsarenotsimilartothe  
conditions under which people use wireless phones, so  
we don't know with certainty what the results of such  
studies mean for human health.  
Three large epidemiology studies have been published  
since December 2000. Between them, the studies  
investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma,  
meningioma, oracousticneuroma, tumorsofthebrainor  
salivary gland, leukemia, or other cancers. None of the  
studiesdemonstratedtheexistenceofanyharmfulhealth  
effects from wireless phones RF exposures. However,  
noneofthestudiescananswerquestionsaboutlong-term  
exposures, since the average period of phone use in these  
studies was around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
Acombinationoflaboratorystudiesandepidemiological  
studies of people actually using wireless phones would  
providesomeofthedatathatareneeded.Lifetimeanimal  
exposure studies could be completed in a few years.  
However, very large numbers of animals would be  
needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide  
datathatisdirectlyapplicabletohumanpopulations,but  
ten or more years' follow-up may be needed to provide  
answers about some health effects, such as cancer. This is  
because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if  
they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in  
134  
Consumer Information on Wireless Phones  
measuring actual RF exposure during day-to-day use of  
wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which  
model of phone is used.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology  
Program and with groups of investigators around the  
world to ensure that high priority animal studies are  
conducted to address important questions about the  
effects of exposure to radio frequency energy (RF).  
FDA has been a leading participant in the World Health  
OrganizationinternationalElectromagneticFields(EMF)  
Project since its inception in 1996. An influential result of  
this work has been the development of a detailed agenda  
ofresearchneedsthathasdriventheestablishmentofnew  
researchprogramsaroundtheworld.TheProjecthasalso  
helpeddevelopaseriesofpublicinformationdocuments  
on EMF issues.  
FDA and Cellular Telecommunications & Internet  
Association (CTIA) have a formal Cooperative Research  
andDevelopmentAgreement(CRADA)todoresearchon  
wireless phone safety. FDA provides the scientific  
oversight, obtaining input from experts in government,  
industry, and academic organizations. CTIA-funded  
research is conducted through contracts to independent  
investigators. The initial research will include both  
laboratory studies and studies of wireless phone users.  
The CRADA will also include a broad assessment of  
additional research needs in the context of the latest  
research developments around the world.  
Section 12: Health and Safety Information  
135  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we  
do not know that there is - it is probably very small. But if  
you are concerned about avoiding even potential risks,  
you can take a few simple steps to minimize your  
exposure to radio frequency energy (RF). Since time is a  
key factor in how much exposure a person receives,  
reducingtheamountoftimespentusingawirelessphone  
will reduce RF exposure.  
If you must conduct extended conversations by wireless phone  
every day, you could place more distance between your body  
and the source of the RF, since the exposure level drops off  
dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or  
use a wireless phone connected to a remote antenna.  
Again,thescientificdatadonotdemonstratethatwireless  
phonesareharmful.ButifyouareconcernedabouttheRF  
exposure from these products, you can use measures like  
those described above to reduce your RF exposure from  
wireless phone use.  
What about children using wireless phones?  
Thescientificevidencedoesnotshowadangertousersof  
wirelessphones,includingchildrenandteenagers.Ifyou  
want to take steps to lower exposure to radio frequency  
energy (RF), the measures described above would apply  
to children and teenagers using wireless phones.  
Reducing the time of wireless phone use and increasing  
the distance between the user and the RF source will  
reduce RF exposure.  
136  
Consumer Information on Wireless Phones  
Some groups sponsored by other national governments  
have advised that children be discouraged from using  
wireless phones at all. For example, the government in  
theUnitedKingdomdistributedleafletscontainingsuch  
arecommendationinDecember2000.Theynotedthatno  
evidence exists that using a wireless phone causes brain  
tumorsorotherilleffects.Theirrecommendationtolimit  
wireless phone use by children was strictly  
precautionary;itwasnotbasedonscientificevidencethat  
any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
believe that hands-free kits reduce risks. Hands-free kits  
can be used with wireless phones for convenience and  
comfort. These systems reduce the absorption of RF  
energyintheheadbecausethephone, whichisthesource  
of the RF emissions, will not be placed against the head.  
On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part  
of the body will absorb more RF energy. Wireless phones  
marketed in the U.S. are required to meet safety  
requirementsregardlessofwhethertheyareusedagainst  
the head or against the body. Either configuration should  
result in compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF  
emissions from wireless phones, there is no reason to  
Section 12: Health and Safety Information  
137  
believethataccessories that claim toshieldtheheadfrom  
thoseemissionsreducerisks.Someproductsthatclaimto  
shield the user from RF absorption use special phone  
cases, while others involve nothing more than a metallic  
accessoryattachedtothephone.Studieshaveshownthat  
these products generally do not work as advertised.  
Unlike "hand-free" kits, these so-called "shields" may  
interfere with proper operation of the phone. The phone  
may be forced to boost its power to compensate, leading  
to an increase in RF absorption. In February 2002, the  
FederaltradeCommission(FTC)chargedtwocompanies  
that sold devices that claimed to protect wireless phone  
users from radiation with making false and  
unsubstantiated claims. According to FTC, these  
defendantslackedareasonablebasistosubstantiatetheir  
claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can  
interact with some electronic devices. For this reason,  
FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac  
pacemakers and defibrillators from wireless telephones.  
This test method is now part of a standard sponsored by  
the Association for the Advancement of Medical  
instrumentation (AAMI). The final draft, a joint effort by  
FDA, medical device manufacturers, and many other  
groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers  
anddefibrillatorsaresafefromwirelessphoneEMI. FDA  
has tested wireless phones and helped develop a  
138  
Consumer Information on Wireless Phones  
voluntary standard sponsored by the Institute of  
ElectricalandElectronicEngineers(IEEE).Thisstandard  
specifiestestmethodsandperformancerequirementsfor  
hearing aids and wireless phones so that no interference  
occurs when a person uses a compatible phone and a  
compatible hearing aid at the same time. This standard  
was approved by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for  
possible interactions with other medical devices. Should  
harmfulinterferencebefoundtooccur,FDAwillconduct  
testing to assess the interference and work to resolve the  
problem.  
Additional information on the safety of RF exposures  
from various sources can be obtained from the following  
organizations:  
FCC RF Safety Program:  
http://www.fcc.gov/oet/rfsafety/  
Environmental Protection Agency (EPA):  
http://www.epa.gov/radiation/  
Occupational Safety and Health Administration's (OSHA):  
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/  
index.html  
National institute for Occupational Safety and Health (NIOSH):  
http://www.cdc.gov/niosh/emfpg.html  
World health Organization (WHO):  
http://www.who.int/peh-emf/  
International Commission on Non-Ionizing Radiation Protection:  
http://www.icnirp.de  
National Radiation Protection Board (UK):  
http://www.nrpb.org.uk  
Section 12: Health and Safety Information  
139  
Updated 4/3/2002: US food and Drug Administration  
http://www.fda.gov/cellphones  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicatebyvoice,almostanywhere,anytime.Butan  
important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility.  
When using your wireless phone behind the wheel of a  
car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such  
as speed dial and redial. If available, these features help  
you to place your call without taking your attention off  
the road.  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
3. Position your wireless phone within easy reach. Be able  
to access your wireless phone without removing your  
eyes from the road. If you get an incoming call at an  
inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are  
driving; if necessary, suspend the call in heavy traffic or  
hazardous weather conditions. Rain, sleet, snow, ice and  
even heavy traffic can be hazardous.  
140  
 
Road Safety  
5. Do not take notes or look up phone numbers while  
driving. Jotting down a "to do" list or flipping through  
your Phonebook takes attention away from your primary  
responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place  
calls when you are not moving or before pulling into  
traffic. Try to plan calls when your car will be stationary.  
If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then  
continue.  
7. Do not engage in stressful or emotional conversations  
that may be distracting. Make people you are talking  
with aware you are driving and suspend conversations  
that have the potential to divert your attention from the  
road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or  
other local emergency number in the case of fire, traffic  
accident or medical emergencies. Remember, it is a free  
call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1  
or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see  
a broken-down vehicle posing no serious hazard, a  
broken traffic signal, a minor traffic accident where no  
Section 12: Health and Safety Information  
141  
one appears injured, or a vehicle you know to be stolen,  
call roadside assistance or other special non-emergency  
number.  
"The wireless industry reminds you to use your phone safely  
when driving."  
Formoreinformation,pleasecall1-888-901-SAFE,orvisit  
our web-site www.wow-com.com  
Provided by theCellularTelecommunications& Internet  
Association  
Operating Environment  
Remember to follow any special regulations in force in  
any area  
and always switch your phone off whenever it is  
forbidden to use it, or when it may cause interference or  
danger. When connecting the phone or any accessory to  
another device, read its user's guide for detailed safety  
instructions. Do not connect incompatible products.  
Aswithothermobileradiotransmittingequipment,users  
are advised that for the satisfactory operation of the  
equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over  
your shoulder).  
Using Your Phone Near Other Electronic Devices  
Mostmodernelectronicequipmentisshieldedfromradio  
frequency (RF) signals. However, certain electronic  
equipment may not be shielded against the RF signals  
142  
   
Using Your Phone Near Other Electronic Devices  
from your wireless phone. Consult the manufacturer to  
discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a minimum  
distance of 15 cm (6 inches) be maintained between a  
wireless phone and a pacemaker to avoid potential  
interference with the pacemaker.  
These recommendations are consistent with the  
independent research and recommendations of Wireless  
Technology Research.  
Persons with pacemakers:  
should always keep the phone more than 15 cm (6 inches) from  
their pacemaker when the phone is switched on.  
should not carry the phone in a breast pocket.  
should use the ear opposite the pacemaker to minimize  
potential interference.  
If you have any reason to suspect that interference is  
taking place, switch your phone off immediately.  
Section 12: Health and Safety Information  
143  
Hearing Aids  
Some digital wireless phones may interfere with some  
hearing aids. In the event of such interference, you may  
wish to consult your hearing aidmanufacturer todiscuss  
alternatives.  
Other Medical Devices  
Ifyouuseanyotherpersonalmedicaldevices,consultthe  
manufacturer of your device to determine if it is  
adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this  
information.Switchyourphoneoffinhealthcarefacilities  
whenanyregulationspostedintheseareasinstructyouto  
do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle. You should also  
consultthemanufacturerofanyequipmentthathasbeen  
added to your vehicle.  
Posted Facilities  
Switchyourphoneoffinanyfacilitywherepostednotices  
require you to do so.  
Potentially Explosive Environments  
Switchyourphoneoffwheninanyareawithapotentially  
explosiveatmosphereandobeyallsignsandinstructions.  
144  
 
Emergency Calls  
Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a  
refueling point (service station). Users are reminded of  
the need to observe restrictions on the use of radio  
equipment in fuel depots  
(fuel storage and distribution areas), chemical plants or  
where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often  
but not always clearly marked. They include below deck  
on boats, chemical transfer or storage facilities, vehicles  
using liquefied petroleum gas (such as propane or  
butane), areas where the air contains chemicals or  
particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn  
off your vehicle engine.  
Emergency Calls  
Thisphone,likeanywirelessphone, operatesusingradio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee  
connectioninallconditions. Therefore, youshouldnever  
rely solely on any wireless phone for essential  
communications (medical emergencies, for example).  
Remember,tomakeorreceiveanycallsthephonemustbe  
switched on and in a service area with adequate signal  
strength. Emergency calls may not be possible on all  
wireless phone networks or when certain network  
services and/or phone features are in use. Check with  
local service providers.  
Section 12: Health and Safety Information  
145  
 
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location  
(for example, 911 or other official emergency number).  
Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example),  
youmayfirstneedtodeactivatethosefeaturesbeforeyou  
can make an emergency call. Consult this document and  
your local cellular service provider.  
Whenmakinganemergencycall,remembertogiveallthe  
necessary information as accurately as possible.  
Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off  
the call until given permission to do so.  
Restricting Children's access to your Phone  
Yourphoneisnotatoy.Childrenshouldnotbeallowedto  
play with it because they could hurt themselves and  
others,damagethephoneormakecallsthatincreaseyour  
phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in  
close proximity to receiving equipment. The FCC can  
require you to stop using the phone if such interference  
cannot be eliminated.  
146  
 
Other Important Safety Information  
Vehicles using liquefied petroleum gas (such as propane  
orbutane)mustcomplywiththeNationalFireProtection  
Standard (NFPA-58). For a copy of this standard, contact  
the National Fire Protection Association, One  
BatterymarchPark,Quincy,MA02269,Attn:Publication  
Sales Division.  
Cautions  
Any changes or modifications to your phone not  
expressly approved in this document could void your  
warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries,  
antennas and chargers. The use of any unauthorized  
accessories may be dangerous and void the phone  
warranty if said accessories cause damage or a defect to  
the phone.  
Althoughyourphoneisquitesturdy, itisacomplexpiece  
ofequipmentandcanbebroken.Avoiddropping,hitting,  
bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the  
phone in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the  
device.  
Check regularly that all wireless phone equipment in your  
vehicle is mounted and operating properly.  
Do not store or carry flammable liquids, gases or explosive  
materials in the same compartment as the phone, its parts or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both  
Section 12: Health and Safety Information  
147  
 
installed or portable wireless equipment in the area over the air  
bag or in the air bag deployment area. If wireless equipment is  
improperly installed and the air bag inflates, serious injury  
could result.  
Switch your phone off before boarding an aircraft. The use of  
wireless phone in aircraft is illegal and may be dangerous to  
the aircraft's operation.  
Failure to observe these instructions may lead to the  
suspension or denial of telephone services to the offender, or  
legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on  
the signal strength in your area. Your phone informs you  
of the current signal strength by displaying a number of  
bars next to the signal strength icon. The more bars  
displayed, the stronger the signal.  
Ifyou'reinsideabuilding, beingnearawindowmaygive  
you better reception.  
Understanding the Power Save Feature  
If your phone is unableto finda signal after 15 minutes of  
searching, a Power Save feature is automatically  
activated. If your phone is active, it periodically rechecks  
service availability or you can check it yourself by  
pressing any key.  
Anytime the Power Save feature is activated, a message  
displays on the screen. When a signal is found, your  
phone returns to standby mode.  
148  
 
Availability of Various Features/Ring Tones  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver.  
When it's turned on, it receives and transmits radio  
frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This  
power can range from 0.006 watts to 0.2 watts in digital  
mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized  
personnel should service your phone and accessories.  
Faulty service may void the warranty.  
There are several simple guidelines to operating your  
phone properly and maintaining safe, satisfactory  
service.  
Hold the phone with the antenna raised, fully-extended and over  
your shoulder.  
Try not to hold, bend or twist the phone's antenna.  
Don't use the phone if the antenna is damaged.  
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, immediately turn the power  
off and remove the battery. If it is inoperable, call Customer  
Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and  
may require additional subscription and/or usage  
charges. Not all features are available for purchase or use  
Section 12: Health and Safety Information  
149  
 
inallareas.DownloadableRingTonesmaybeavailableat  
an additional cost. Other conditions andrestrictions may  
apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone  
usage patterns and conditions. Battery power  
consumption depends on factors such as network  
configuration, signal strength, operating temperature,  
features selected, frequency of calls, and voice, data, and  
other application usage patterns.  
Battery Precautions  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses  
less power; talk and standby time are greatly affected by the  
signal strength on the cellular network and the parameters set  
by the network operator.  
Battery charging time depends on the remaining battery charge  
and the type of battery and charger used. The battery can be  
charged and discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and standby time)  
is noticeably shorter than normal, it is time to buy a new  
battery.  
If left unused, a fully charged battery will discharge itself over  
time.  
Use only Samsung-approved batteries and recharge your  
battery only with Samsung-approved chargers. When a charger  
is not in use, disconnect it from the power source. Do not leave  
the battery connected to a charger for more than a week, since  
overcharging may shorten its life.  
150  
   
Battery Precautions  
Extreme temperatures will affect the charging capacity of your  
battery: it may require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car  
in summer or winter conditions, as you will reduce the  
capacity and lifetime of the battery. Always try to keep the  
battery at room temperature. A phone with a hot or cold  
battery may temporarily not work, even when the battery is  
fully charged. Li-ion batteries are particularly affected by  
temperatures below 0 °C (32 °F).  
Do not short-circuit the battery. Accidental short- circuiting can  
occur when a metallic object (coin, clip or pen) causes a direct  
connection between the + and - terminals of the battery (metal  
strips on the battery), for example when you carry a spare  
battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Dispose of used batteries in accordance with local regulations.  
In some areas, the disposal of batteries in household or  
business trash may be prohibited. For safe disposal options for  
Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a  
fire.  
Section 12: Health and Safety Information  
151  
Care and Maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many  
years  
Keep the phone and all its parts and accessories out of the  
reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an  
electric shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its  
moving parts may be damaged.  
Do not store the phone in hot areas. High temperatures can  
shorten the life of electronic devices, damage batteries, and  
warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms  
up to its normal operating temperature, moisture can form  
inside the phone, which may damage the phone's electronic  
circuit boards.  
Do not drop, knock or shake the phone. Rough handling can  
break internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong  
detergents to clean the phone. Wipe it with a soft cloth slightly  
dampened in a mild soap-and-water solution.  
Do not paint the phone. Paint can clog the device's moving  
parts and prevent proper operation.  
Do not put the phone in or on heating devices, such as a  
microwave oven, a stove or a radiator. The phone may explode  
when overheated.  
152  
 
Care and Maintenance  
Use only the supplied or an approved replacement antenna.  
Unauthorized antennas or modified accessories may damage  
the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working  
properly, take it to your nearest qualified service facility. The  
personnel there will assist you, and if necessary, arrange for  
service.  
Section 12: Health and Safety Information  
153  
154  
Section 13: Warranty Information  
Topics Covered  
• Standard Limited Warranty  
Section 13: Warranty Information  
155  
   
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, L.P.  
("SAMSUNG") warrants to the original purchaser  
("Purchaser") that SAMSUNG's Phones and accessories  
("Products") are free from defects in material and  
workmanship under normal use and service for the  
period commencing upon the date of purchase and  
continuingforthefollowingspecifiedperiodoftimeafter  
that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
WhatisNotCovered?ThisLimitedWarrantyisconditioned  
upon proper use of Product by Purchaser. This Limited  
Warranty does not cover: (a) defects or damage resulting  
from accident, misuse, abuse, neglect, unusual physical,  
electrical or electromechanical stress, or modification of  
any part of Product, including antenna, or cosmetic  
damage; (b) equipment that has the serial number  
removedormadeillegible;(c)anyplasticsurfacesorother  
externally exposed parts that are scratched or  
damaged due to normal use; (d) malfunctions resulting  
from the use of Product in conjunction with accessories,  
156  
   
Standard Limited Warranty  
products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased  
outside the United States or Canada. This Limited  
Warranty covers batteries only if battery capacity falls  
below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the  
battery has been charged by a battery charger not  
specified or approved by SAMSUNG for charging the  
battery, (ii) any of the seals on the battery are broken or  
show evidence of tampering, or (iii) the battery has been  
used in equipment other than the SAMSUNG phone for  
which it is specified.  
What are SAMSUNG's Obligations? During the applicable  
warranty period, SAMSUNG will repair or replace, at  
SAMSUNG's sole option, without charge to Purchaser,  
any defective component part of Product. To obtain  
service under this Limited Warranty, Purchaser must  
return Product to an authorized phone service facility in  
an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof  
ofsaleshowingthedateofpurchase, theserialnumber of  
Product and the sellers' name and address. To obtain  
assistance on where to deliver the Product, call Samsung  
Customer Care at 1-888-987-4357. Upon receipt,  
SAMSUNG will promptly repair or replace the defective  
Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components  
when repairing any Product or replace Product with a  
rebuilt, reconditioned or new Product. Repaired/  
Section 13: Warranty Information  
157  
replaced leather cases, pouches and holsters will be  
warranted for a period of ninety (90) days. All other  
repaired/replacedProductwillbewarrantedforaperiod  
equal to the remainder of the original Limited Warranty  
ontheoriginalProductorfor90days,whicheverislonger.  
All replaced parts, components, boards and equipment  
shall become the property of SAMSUNG. If SAMSUNG  
determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts,  
shipping,andlaborchargesfortherepairorreturnofsuch  
Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY  
CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO  
WARRANTY OR REPRESENTATION AND THERE  
ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR  
ANY PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE  
PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF  
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING  
THERETO.  
158  
Standard Limited Warranty  
NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN  
EXPRESS WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE  
BY OPERATION OF LAW, INCLUDING IF  
APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO  
THE SAME DURATION OF TIME AS THE EXPRESS  
WRITTEN WARRANTY STATED HEREIN. SOME  
STATES/PROVINCES DO NOT ALLOW  
LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG  
SHALLNOTBELIABLEFORANYDAMAGESOFANY  
KIND  
RESULTINGFROMTHEPURCHASE,USE,ORMISUSE  
OF, OR INABILITY TO USE THE PRODUCT OR  
ARISINGDIRECTLYORINDIRECTLYFROMTHEUSE  
OR LOSS OF USE OF THE PRODUCT OR FROM THE  
BREACHOFTHEEXPRESSWARRANTY,INCLUDING  
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR  
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED  
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR  
GROSS NEGLIGENCE) OR FAULT COMMITTED BY  
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR  
ANY BREACH OF CONTRACT OR FOR ANY CLAIM  
BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DONOT ALLOW  
THE EXCLUSION OR LIMITATION OF INCIDENTAL  
Section 13: Warranty Information  
159  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATION OR EXCLUSION MAY NOT APPLY TO  
YOU.THISWARRANTYGIVESYOUSPECIFICLEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM STATE TO STATE/  
PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE  
OTHER THAN THEORIGINALPURCHASEROF THIS  
PRODUCT AND STATES PURCHASER'S EXCLUSIVE  
REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR  
UNENFORCEABLE BY REASON OF ANY LAW, SUCH  
PARTIAL ILLEGALITY OR UNENFORCEABILITY  
SHALL NOT AFFECT THE ENFORCEABILITY FOR  
THE REMAINDER OF THIS LIMITED WARRANTY  
WHICH PURCHASER ACKNOWLEDGES IS AND  
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY  
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE  
PURCHASERMAYUSETHIRD-PARTYSOFTWAREOR  
EQUIPMENT IN CONJUNCTION WITH THE  
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR  
REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR  
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR  
EQUIPMENT, WHETHER SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT IS INCLUDED WITH  
THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATEANYSUCHSOFTWAREOREQUIPMENT  
160  
Standard Limited Warranty  
WITH THEPRODUCT. THEQUALITY, CAPABILITIES,  
OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER  
OF SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT, AS THE CASE MAY BE.  
This Limited Warranty allocates risk of Product failure  
between Purchaser and SAMSUNG, and SAMSUNG's  
Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited  
Warranty. The agents, employees, distributors, and  
dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make  
additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer  
advertising or presentation, whether oral or written, do  
not constitute warranties by SAMSUNG and should not  
be relied upon.  
Samsung Telecommunications America, L.P.  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2005SamsungTelecommunicationsAmerica.Allrights  
reserved.  
No reproduction in whole or in part allowed without  
prior  
Section 13: Warranty Information  
161  
written approval. Specifications and availability subject  
to change without notice.  
Intellectual Property Statement  
All Intellectual Property, as defined below, owned by or  
which is otherwise the property of Samsung or its  
respective suppliers relating to the SAMSUNG Phone,  
including but not limited to, accessories, parts, or  
software relating thereto (the "Phone System"), is  
proprietary to Samsung and protected under federal  
laws, state laws, and international treaty provisions.  
Intellectual Property includes, but is not limited to,  
inventions (patentable or unpatentable), patents, trade  
secrets, copyrights, software, computer programs, and  
related documentation and other works of authorship.  
You may not infringe or otherwise violate the rights  
securedbytheIntellectualProperty. Moreover,youagree  
thatyouwillnot(andwillnotattemptto)modify,prepare  
derivative works of, reverse engineer, decompile,  
disassemble, or otherwise attempt to create source code  
from the software. No title to or ownership in the  
Intellectual Property is transferred to you. All applicable  
rights of the Intellectual Property shall remain with  
SAMSUNG and its suppliers.  
162  
 
Samsung Telecommunications America (STA), L.P.  
Samsung Telecommunications America (STA),  
L.P.  
Internet Address: http://www.samsungusa.com  
©2005SamsungTelecommunicationsAmerica.Samsung  
is a registered trademark of Samsung Electronics  
America, Inc. and its related entities.  
Headquarters:  
Customer Care Center:  
1301 E. Lookout Drive  
Richardson, TX 75082  
Tel: 972.761.7000  
1601 E. Plano Parkway, Suite 150  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Openwave® is aregisteredTrademarkofOpenwave, Inc.  
RSA® is a registered Trademark RSA Security, Inc.  
Section 13: Warranty Information  
163  
 
164  
Redialing Last Number  
Silent Mode 30  
Index  
A
Call Records  
Call time 29  
ABC mode 48  
Accessing a Menu Func-  
tion 40  
Delete all 29  
Incoming calls 28  
Missed calls 28  
Outgoing calls 28  
Alarm 104  
Alerts on Call 89  
Call Waiting 35, 100  
Charging battery 8  
Conversion 112  
D
B
Backlight  
description 20  
Battery  
Dialing a Number  
Phone Book 59  
charging 8  
installing 8  
low indicator 10  
removing 6  
SIM Card 59  
Display  
backlight 20  
icons 19  
Display Settings 91  
E
Entering Text 47  
Changing the Text Input  
Mode 48  
Brightness Control 93  
Broadcast Messages 80  
Browser Messages 79  
C
Calculator 108  
Calendar 105  
Using ABC Mode 51  
Using Numbers 53  
Using Symbols 53  
Using T9 Mode 49  
Call Functions 21  
Adjusting the Call Volume  
Answering a Call 24  
Call Log 25  
Call Records 27  
Correcting the Number  
External Display 20  
F
Functions and Options 30  
Making a Call 22  
165  
 
Messaging 65  
G
Types of Messages 66  
Games 117  
Get More Help 93  
Getting Started 5  
Missed Call  
Deleting 27  
Editing 26  
Activating Your Phone 6  
Viewing 26  
Voicemail 11  
Greeting Message 93  
H
Multi-Party Call 36  
Dropping One Participant  
Health and Safety Infor-  
mation 127  
Private Conversation 36  
Mute 33  
HiFi Ringers 116  
I
N
Network Selection 101  
Network Services  
Call Forwarding 99  
Number mode 48  
O
On/off switch, phone 10  
Icons, description 19  
Instant Messaging 82  
International Call 22  
K
Keypad Tone 87  
Options  
L
During a Call 32  
Putting a Call on Hold 32  
Low battery indicator 10  
M
Organizer 103  
Alarm 104  
Making a Call  
Phonebook 23  
Calculator 108  
Calendar 105  
Conversion 112  
Stopwatch 113  
Timer 112  
MegaTones 116  
Memo  
Viewing 107  
Writing 106  
To Do List 108  
Voice Memo 110  
Memory Status 82  
Menu Navigation 39  
Own Number 62  
Menu Outline 41  
Message Tone 87  
166  
Switching on/off  
phone 10  
Symbol mode 48  
P
Phone  
icons 19  
switching on/off 10  
T
Phone Settings 89  
T9 mode 48  
Phonebook 55  
Dialing a Number 59  
Finding a Phonebook En-  
try 56  
Searching for a Number  
Picture Messages 73  
Text Input Mode  
Changing 48  
Text Messages 68  
Timer 112  
To Do List 108  
Travel adapter 8  
t-zones 122  
t-zones Browser  
Entering Text 123  
Exiting 122  
R
Record  
Voice Memo 110  
Ring Volume 86  
Navigating 122  
S
U
Security 94  
UnderstandingYourPhone  
Settings 85  
Phone Settings 89  
Sound Settings 86  
Features of Your Phone  
View of Your Phone 16  
Shortcuts 40  
SIM card  
V
installing 6  
Voice List 111  
Soft Keys 30  
Speakerphone 34  
Voice Mail 11, 80  
changing number 12  
Voice Memo 110  
Voice messages 66  
W
Speed Dial  
Setting Up Entries 60  
Standard Limited Warran-  
ty  
Warranty Information 155  
Stopwatch 113  
167  
168  

XO Vision Xo Vision Shiner X140VIDB User Manual
Tannoy W960I User Manual
Seagate ST120HM001 User Manual
Seagate SAVVIO ST600MM0026 User Manual
SanDisk pSSD P2 User Manual
Samsung SGH T429 User Manual
Sagem my501Ci User Manual
Philips TV SCREEN 37HFL3330 User Manual
Philips AJ3540D User Manual
Panasonic EB X300 User Manual