SGH-i550W
User’s Guide
Copyrights and trademarks
®
• Bluetooth is a registered trademark
of the Bluetooth SIG, Inc.
worldwide—Bluetooth QD ID: B013176
Rights to all technologies and products
that comprise this device are the
property of their respective owners:
®
• Windows Media Player is a registered
trademark of Microsoft Corporation.
• This product includes
software licensed from
Symbian Ltd.
© 1998-2007. Symbian
and Symbian OS are
trademarks of Symbian
Ltd.
• Java™ is a trademark of
Sun Microsystems, Inc.
Contents
2
Contents
3
Install mobile devices and
equipment with caution
Safety and usage
information
Ensure that any mobile devices or related
equipment installed in your vehicle are
securely mounted. Avoid placing your
device and accessories near or in an air
bag deployment area. Improperly
installed wireless equipment can cause
serious injury when air bags inflate
rapidly.
Comply with the following precautions to
avoid dangerous or illegal situations and
ensure peak performance of your device.
Safety warnings
Keep your device away from small
children and pets
Handle and dispose of batteries and
chargers with care
Keep your device and all accessories out
of the reach of small children or animals.
Small parts may cause choking or serious
injury if swallowed.
• Use only Samsung-approved batteries
and chargers specifically designed for
your device. Incompatible batteries
and chargers can cause serious injuries
or damage to your device.
Protect your hearing
Listening to a headset at high
volumes can damage your
hearing. Use only the minimum
volume setting necessary to hear
your conversation or music.
• Never dispose of batteries in a fire.
Follow all local regulations when
disposing used batteries.
4
Safety and usage information
• Never place batteries or phones on or
in heating devices, such as microwave
ovens, stoves, or radiators. Batteries
may explode when overheated.
Turn off the device in potentially
explosive environments
Do not use your device at refuelling
points (service stations) or near fuels or
chemicals. Turn off your device whenever
directed by warning signs or instructions.
Your device could cause explosions or fire
in and around fuel or chemical storage
and transfer areas or blasting areas. Do
not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the device, its parts, or
accessories.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches)
between mobile devices and pacemakers
to avoid potential interference, as
recommended by manufacturers and the
independent research group, Wireless
Technology Research. If you have any
reason to suspect that your device is
interfering with a pacemaker or other
medical equipment, turn off the device
immediately and contact the
Reduce the risk of repetitive motion
injuries
manufacturer of the pacemaker or
medical equipment for guidance.
When sending text messages or playing
games on your device, hold the device
with a relaxed grip, press the buttons
lightly, use special features that reduce
the number of buttons you have to press
(such as templates and predictive text),
and take frequent breaks.
5
Safety and usage information
Turn off the device near medical
equipment
Safety precautions
Drive safely at all times
Your device can interfere with medical
equipment in hospitals or health care
facilities. Follow all regulations, posted
warnings, and directions from medical
personnel.
Avoid using your device while driving and
obey all regulations that restrict the use
of mobile devices while driving. Use
hands-free accessories to increase your
safety when possible.
Turn off the device or disable the
wireless functions when in an
aircraft
Follow all safety warnings and
regulations
Your device can cause interference with
aircraft equipment. Follow all airline
regulations and turn off your device or
switch to a mode that disables the
wireless functions when directed by the
airline personnel.
Comply with any regulations that restrict
the use of a mobile device in a certain
area.
Use only Samsung-approved
accessories
Using incompatible accessories may
damage your device or cause injury.
6
Safety and usage information
Protect batteries and chargers from
damage
Handle your device carefully and
sensibly
• Avoid exposing batteries to very cold or
very hot temperatures (below 0° C/32°
F or above 45° C/113° F).
Extreme temperatures can reduce the
charging capacity and life of your
batteries.
• Do not allow your device to get wet—
liquids can cause serious damage. Do
not handle your device with wet hands.
Water damage to your device can void
your manufacturer’s warranty.
• Avoid using or storing your device in
dusty, dirty areas to prevent damage
to moving parts.
• Prevent batteries from contacting
metal objects, as this can create a
connection between the + and -
terminals of your batteries and lead to
temporary or permanent battery
damage.
• Your device is made of complex
electronics—protect it from impacts
and rough handling to avoid serious
damage.
• Never use a damaged charger or
battery.
• Do not paint your device, as paint can
clog moving parts and prevent proper
operation.
7
Safety and usage information
• Avoid using the device’s camera flash
or light close to the eyes of children or
animals.
Important usage information
Use your device in the normal
position
• Your device and memory cards may be
damaged by exposure to magnetic
fields. Do not use carrying cases or
accessories with magnetic closures or
allow your phone to come in contact
with magnetic fields for extended
periods of time.
Avoid contact with your device’s internal
antenna.
Allow only qualified personnel to
service your device
Allowing unqualified personnel to service
your device may result in damage to your
device and will void your warranty.
Avoid interference with other
electronic equipment
Your device emits radio frequency (RF)
signals that may interfere with
unshielded or improperly shielded
electronic equipment, such as
pacemakers, hearing aids, and medical
equipment in homes or vehicles. Consult
the manufacturers of your electronic
equipment to solve any interference
problems you experience.
Ensure maximum battery and
charger life
• Avoid charging batteries for more than
a week, as overcharging may shorten
battery life.
• Over time, unused batteries will
discharge and must be recharged
before use.
8
Safety and usage information
• Disconnect chargers from power
sources when not in use.
Ensure access to emergency services
Emergency calls from your device may
not be possible in some areas or
circumstances. Before travelling in
remote or undeveloped areas, plan an
alternate method of contacting
• Use batteries only for their intended
purpose.
Handle SIM cards and memory cards
with care
emergency services personnel.
• Do not remove a card while the device
is transferring or accessing
information, as this could result in loss
of data and/or damage to the card or
device.
Specific Absorption Rate (SAR)
certification information
Your device conforms to European Union
(EU) standards that limit human
exposure to radio frequency (RF) energy
emitted by radio and telecommunications
equipment. These standards prevent the
sale of mobile devices that exceed a
maximum exposure level (known as the
Specific Absorption Rate, or SAR) of 2.0
watts per kilogram of body tissue.
• Protect cards from strong shocks,
static electricity, and electrical noise
from other equipment.
• Frequent writing and erasing will
shorten the life span of memory cards.
• Do not touch gold-coloured contacts or
terminals with your fingers or metal
objects. If dirty, wipe the card with a
soft cloth.
9
Safety and usage information
During testing, the maximum SAR
recorded for this model was 0.679 watts
per kilogram. In normal use, the actual
SAR is likely to be much lower, as the
device has been designed to emit only
the RF energy necessary to transmit a
signal to the nearest base station. By
automatically emitting lower levels when
possible, your device reduces your
overall exposure to RF energy.
The Declaration of Conformity at the back
of this user’s guide demonstrates your
device’s compliance with the European
Radio & Terminal Telecommunications
Equipment (R&TTE) directive. For more
information about the SAR and related
EU standards, visit the Samsung mobile
website.
10
Communication
1
Your device allows you to send and
receive many types of calls and
messages over cellular networks and the
internet.
3. To end the call, press [
].
Make a call from the contact list
1. In Standby mode, press [
]
→
Contacts to open your contact list.
Calls
2. Scroll to a contact or search by
entering the first few letters of the
contact's name.
Learn to use your device's call functions.
For basic call functions, see the Quick
Start Guide.
3. Press [
] to call the default number
for the contact.
You can also press the trackball to
open the contact information and
select a different number or call type
(e.g., video).
Call an international number
1. Press [ ] twice to insert the
character (this replaces the
international access code).
+
2. Enter the complete number you want
to dial (country code, area code, and
phone number), and then press [
to dial.
]
11
Communication
Insert a pause
View and return missed calls
When calling automated systems, you
can insert a pause between the phone
number and another set of numbers.
Your device will show missed calls on the
display.
To return a missed call,
To insert a pause, press [ ] to select the
type of pause:
1. Press the trackball
2. Scroll to a missed call.
3. Press [ ] to dial.
.
•
p
(automatic pause)-press [ ] three
times to insert an automatic pause.
The device will pause for two seconds,
then automatically transmit the
numbers after the pause.
Call a recently dialled number
1. In Standby mode, press [ ] to
•
w
(manual pause)-press [ ] four
display a list of recent numbers.
times to insert a manual pause. After
the pause, you must press <Send> to
transmit the remaining numbers.
2. Scroll to a number and press [
].
12
Communication
Divert calls
Bar (block) calls
Your service provider or network may or
may not support this feature.
To activate this function, you need a
barring password from your service
provider.
To direct your incoming calls to another
number,
To bar incoming calls from a specific
number,
1. In Standby mode, press [
]
→
Settings Phone Call divert
→
→
.
1. In Standby mode, press [
]
→
Settings Phone Call barring.
→
→
2. Scroll to a call type and press the
trackball
.
2. Scroll to a barring type and press the
trackball.
3. Scroll to a diverting type and press
Options Activate
<
>
→
.
3. Enter the barring password and press
<
OK>.
4. For voice calls, scroll to a diverting
location (mailbox or other number)
If you enter the incorrect barring
password three times, the device will
lock. Contact your service provider.
and press the trackball
.
5. If necessry, enter a phone number and
press <OK>.
13
Communication
•
Drafts: messages you have not yet
sent
Messages
Learn to use messaging functions. For
instructions on entering text, see the
Quick Start Guide. For an explanation of
•
•
Sent: recent sent messages
Outbox: temporary storage for
messages waiting to be sent
X
31.
•
Reports: delivery reports of text and
multimedia messages; you must
request a delivery report in the
message options before sending
Message folders
When you open Messaging, you will see
the New message function and a list of
folders:
• Messages sent via Bluetooth are not
saved in the Drafts or Sent folder.
• You may not receive a delivery
report for a multimedia message if
you send it to an email address.
•
•
•
Inbox: received messages, except
email and cell broadcast messages
My folders: message templates and
saved messages
Mailbox: received email; when you
create a mailbox, the name you specify
will appear here
14
Communication
Inbox icons
Outbox status
In the Inbox, you may see the following
icons next to your messages:
When you are outside your service area
or have no connection to the network or
email server, your messages will remain
in the Outbox until you re-establish a
connection. The outbox status explains
why a message is being held in the
Outbox:
Icon
Description
Unread text message
Multimedia message
notification
•
Sending: the device is connecting and
Unread multimedia message
the message will be sent immediately
•
Waiting: the message is in cue behind
another message and will be sent as
soon as possible
Unread smart message
Unread service message
•
•
Resend at (time): the message has
failed to send and will be sent at the
Data received via a Bluetooth
connection
specified time. Press <Options
Send to resend the message
immediately.
>
→
Unknown message type
Deferred: the message has been
scheduled to send at a later time
15
Communication
•
Failed: the device has attempted to
send the message multiple times, but
has failed
View a text message
1. In Standby mode, press [
]
→
Messaging
→
Inbox.
2. Scroll to a message and press the
Text messages
trackball
.
Text messages longer than 160
characters will be sent as two or more
messages and may result in additional
charges.
Retrieve messages from a SIM card
If you have text messages stored on a
SIM card, you must copy them to the
device before you can view them.
Send a text message
1. In Standby mode, press [
Messaging Options
messages
]
→
→
1. In Standby mode, press [
Messaging New message
message
]
→
→
<
>
SIM
→
→
Text
.
.
2. Press <Options
>
→
Mark/Unmark
→
2. Enter a phone number or press the
trackball to select a contact.
Mark (to select one) or Mark all (to
select all).
3. Scroll down and enter text.
4. Press the trackball to send the
message.
16
Communication
3. Press <Options
a folder.
>
→
Copy
→
Inbox or
To manually set an access point,
1. In Standby mode, press [
Settings Connection
points
]
→
You can now view the messages from the
folder on your device.
→
→
Access
.
2. Scroll down and press the trackball to
select an existing access point or press
Multimedia messages
<
Options
>
→
New access point.
Before you can send multimedia
messages, you must define an access
point.
3. Set access point options according to
the instructions provided by your
service provider.
Set an access point
Your service provider may supply access
point settings via a smart message. To
automatically set an access point using a
smart message, see "Save smart
Send a multimedia message
1. In Standby mode, press [
Messaging New message
Multimedia message
]
→
→
→
.
X
27.
2. Enter a phone number or press the
trackball to select a contact.
3. Scroll down and enter a subject.
17
Communication
4. Scroll down and enter text.
• To change the message layout, press
Options a text position
<
>
→
5. To insert an existing multimedia
• To preview the message, press
Options Preview
object, press <Options
object an object type. To create and
insert a new multimedia object, press
Options Insert new an
object type.
>
→
Insert
<
>
→
→
• To remove an item, press <Options
>
<
>
→
→
→
Remove an item
→
You can add images, sounds, or
videos to slides; however, you can
only add one type of media type per
slide.
6. Press the trackball
message.
→
Send to send the
You can only add images with a
resolution of 176 x 144 or lower.
View a multimedia message
1. In Standby mode, press [
Messaging Inbox
2. Scroll to a message and press the
trackball
Edit a multimedia message
]
→
→
.
You can edit your multimedia message
before sending it:
.
• To add fields to the message header,
press <Options
>
→
Address fields
→
a field type
18
Communication
Listen to voice mail
Email messages
If your voice mail number is preset by
your service provider, you can press and
Before you can send or receive email
messages, you must create a mailbox.
hold [1] to access your voice mail. If the
voice mail number is not preset or if you
need to change the voice mail number,
Create a mailbox
1. In Standby mode, press [
Messaging Options
E-mail
]
→
→
1. In Standby mode, press [
Call mailbox
]
→
Tools
→
<
>
Settings
→
.
→
.
2. Enter the voice mail number provided
by your service provider.
2. Scroll to Mailbox in use and press the
trackball
.
3. Press <OK>.
3. Press <Yes>.
You can now access your voice mail from
Standby mode by pressing and holding
4. Press the trackball to start the mailbox
wizard and follow the onscreen
instructions.
[1].
The new mailbox will automatically
appear in Messaging. To change the
current mailbox, return to Email settings
and switch the "Mailbox in use" to
another mailbox (steps 1 and 2 above).
19
Communication
If you are offline or outside your service
area, the message will be held in the
Outbox until you are online and in your
service area.
If you use the POP3 protocol, the
mailbox will not update automatically
when you are online. You must
disconnect and then reconnect to view
new messages.
View an email message
Send an email message
When you open a mailbox, you can view
previously retrieved emails offline or
connect to the email server to view new
messages. After you retrieve email
messages, you can view them offline.
1. In Standby mode, press [
Messaging New message
E-mail
]
→
→
→
.
2. Enter an email address or press the
trackball to select a contact.
To view new messages online,
1. In Standby mode, press [
]
→
3. Scroll down and enter a subject.
4. Scroll down and enter text.
Messaging your mailbox.
→
2. Press <Options
>
→
→
Connect
.
5. Press <Options
>
→
Insert
→
an
3. Press <Options
>
Retrieve e-mail
.
attachment type (optional).
6. Press the trackball Send.
→
20
Communication
To view new messages offline,
1. Repeat steps 1-3 above.
To save an attachment,
1. From an open email, press <Options
Attachments
2. Scroll to the attachment and press
Options Save
>
→
.
2. Press <Options
>
→
Disconnect.
<
>
→
.
View or save email attachments
Email attachments ( ) may contain
viruses that can damage your
device. To protect your device, open
attachments only if you trust the
sender. For more information, see
Delete an email message
You can delete email messages from your
device only or from both your device and
the mail server.
X
88.
To delete a message from your device
only,
To view an attachment,
1. In Standby mode, press [
]
→
1. From an open email, press <Options
>
Messaging your mailbox.
→
→
Attachments
.
2. Scroll to an email and press
Options Delete Phone only.
2. Scroll to the attachment and press the
trackball.
<
>
→
→
The email header will remain in your
mailbox until you delete the message
from the mail server.
The attachment opens with the
corresponding application.
21
Communication
To delete a message from both from
device and the mail server,
Set up a server
1. In Standby mode, press [
]
→
Connectivity
→
IM.
1. In Standby mode, press [
]
→
Messaging your mailbox.
→
A prompt asks if you want to define a
server. Press <Yes> (If the prompt
2. Scroll to an email and press
Options Delete Phone and
server
does not appear, press <Options
>
→
<
>
→
→
Settings Servers).
→
.
2. Set the server options according to
instructions provided by your service
provider.
If you are offline, messages will be
deleted from the server the next time
you connect. If you are using the
POP3 protocol, deleted messages are
removed when you close the mailbox
connection.
Login to the IM server
1. In Standby mode, press [
Connectivity IM
]
→
→
.
Instant messages
2. If the device does not attempt to login
automatically, press <Options
Log in
>
→
You can send and receive instant
messages (IM) if your service provider
supports this feature. Before you can
send or receive instant messages, you
must set up a server.
.
3. Enter your user ID and password, and
then press <OK>.
22
Communication
4. To log out, press <Options
>
]
→
Log
•
•
Save to notes: record your
conversation and save it in Notes
out
.
Blocking options Add to
→
Start a conversation
blocked list: block messages from
an IM contact
1. In Standby mode, press [
→
Connectivity
Conversations
→
IM
→
•
Change own availability: change
the way you appear to other IM
contacts
.
2. Press <Options
conversation
Select from contacts
>
→
New
→
Enter user ID or
5. To end the conversation, press
Options Close conversation.
.
<
>
→
3. Enter a user ID or select a contact
from your contact list.
Accept an invitation
When you are logged in to the IM server
and receive an IM invitation, your device
shows "1 new IM message" To accept the
invitation, press <Show>. If you have
multiple invitations at once, press
4. During a conversation, press
<Options> to access the following:
•
Insert smiley: use one of the
preset smileys
<
Show>, scroll to an invitation, and
•
Send image: send an image to an
IM contact
press <OK>.
23
Communication
Add IM contacts
Change IM options
You can save IM contact information by
When chatting, press <Options> to
pressing <Options
>
→
Add to IM
change the following:
contacts during a conversation. You can
also add information in IM Contacts by
•
•
•
•
Preferences: set preferences for IM
contacts and messages
pressing <Options
>
→
New IM
Servers: add a new server or edit
settings for an existing server
contact
.
When you view your IM contacts, you
may see the following icons:
Default server: set the default server
for instant messaging
Icon
Description
IM login type: set the login mode to
automatic (types) or manual
the contact is online
the contact is offline
the contact is blocked
Audio messages
You can send audio messages with voice
memos or sound clips. To record a voice
If you see no icon next to a contact’s
name, the contact is unknown.
X
44.
24
Communication
Send an audio message
6. Press <Options
>
→
Send.
1. In Standby mode, press [
]
→
Messaging
Audio message
→
New message
.
→
Cell broadcast messages
If your service provider supports this
function, you can subscribe to cell
broadcasts that provide automatic
notifications or news updates. To learn
about available cell broadcasts, contact
your service provider.
2. Press <Options
>
→
Add recipient.
3. Scroll to a recipient and press the
trackball OK>.
→
<
4. To insert an existing sound clip:
a. Press <Options
>
→
Insert sound
.
Add a cell broadcast topic
clip
→
From Gallery
Contact your service provider for topic
names and numbers.
b. Scroll to a sound clip and press the
trackball (skip to step 6).
To add a topic to the list of cell
broadcasts,
5. To record and insert a new sound clip:
a. Press <Options
>
→
Insert sound
1. In Standby mode, press [
Messaging Options
broadcast
]
→
→
clip New sound clip
→
.
→
<
>
Cell
b. When you finish recording, press
Stop> to automatically attach the
sound clip to the audio message.
.
<
25
Communication
2. Press <Options
>
→
Topic
→
Add
View a cell broadcast topic
manually
.
1. In Standby mode, press [
]
→
Messaging
broadcast
→
<
Options
>
→
Cell
3. Enter the topic name and number, and
then press <OK>.
.
2. Scroll to a topic folder and press the
trackball
Subscribe to a cell broadcast
.
1. In Standby mode, press [
Messaging Options
broadcast
]
→
→
3. Scroll to a topic and press the trackball
.
→
<
>
Cell
.
Set automatic notification of new cell
broadcast messages
2. Scroll to a topic and press <Options
>
→
Subscribe
.
To receive notifications when new cell
broadcast messages arrive,
Your device will now receive new
messages automatically.
1. In Standby mode, press [
Messaging Options
broadcast
]
→
→
3. To cancel a subscription, press
→
<
>
Cell
<
Options
>
→
Cancel subscription.
.
Some connection settings may block
cell broadcasts. Contact your service
provider for the appropriate
connection settings.
2. Scroll to a topic and press <Options
>
→
Hotmark
.
3. To stop automatic notifications, press
Options Remove hotmark
<
>
→
.
26
Communication
3. Press <Options> and save the data or
settings according to the smart
message type:
Smart messages
Your device can receive many kinds of
smart messages, including picture
messages, business cards, ringtones,
operator logos, calendar events, browser
bookmarks, and settings. Your service
provider may send smart messages that
you can use to load settings into your
device.
•
•
•
•
Business card: select Save
business card
Ringing tone: to save to Gallery
select Save
,
Calendar entry: select Save to
Calendar
WAP message: select Add to
Save smart message data or settings
to your device
bookmarks or Save to Contacts
•
•
SMS service number: select Save
1. In Standby mode, press [
Messaging Inbox
]
→
→
.
Voicemail server number: select
Save to Contacts
2. Scroll to a message and press the
trackball
.
•
Access point settings: select Save
27
Communication
•
E-mail settings: select Save
Logs
You may also receive an E-mail
Learn to view log information about calls,
packet data, and other communication
events.
notification, which tells you how many
new emails are in your remote mailbox.
Service messages
Recent calls
You may receive service messages from
your service provider that are deleted
automatically when they expire. You can
view service messages from the Inbox
(you may have to download the message
from the service provider). Contact your
service provider for more information
about service messages.
You can view recent and erase logs of
recently missed calls, received calls, or
dialled numbers.
View recent call logs
To view recently missed calls, received
calls, or dialled numbers,
1. In Standby mode, press [
Recent calls
]
→
Log
→
.
2. Scroll to a call type and press the
trackball
.
To call a number from a call log, scroll
to the number and press
[
].
28
Communication
Erase recent call logs
Call duration
You can erase all recent call logs at once,
erase a single call log, or delete a single
number from a log.
To view the durations of your last call,
dialled number, received call, or all calls,
press [
]
→
Log
→
Call duration
.
To erase all recent call logs,
To reset the call timers,
1. Press <Options
1. In Standby mode, press [
Recent calls
]
→
Log
→
>
→
Clear timers.
.
2. Enter the lock code (the default lock
code is 00000000).
2. Press <Options
>
→
Clear recent
calls
.
Packet data
To erase a single call log,
To view the amount of sent or received
1. In Standby mode, press [
]
→
Log
→
→
packet data, press [
data
]
→
Log
→
Packet
Recent calls
→
a call type.
.
2. Press <Options
>
→
Clear list.
To reset the packet data counters,
1. Press <Options Clear counters.
To erase a single number from a log,
1. In Standby mode, press [ Log
Recent calls a call type.
2. Scroll to a number and press [
>
→
]
→
2. Enter the lock code (the default lock
code is 00000000).
→
C
].
29
Communication
Erase the communication log
Communication log
To permanently erase all of the log
You can view communication details and
filter logs with the communication log.
contents, press <Options
>
→
Clear log.
View the communication log
Log duration
1. In Standby mode, press [
]
→
Log.
You can change the length of time that
communication events are stored in the
logs. After that time, events are
2. Scroll right to switch to the
communication log.
automatically erased to free up memory.
Some events, such as a text message
split into multiple parts, will appear as
one communication event.
To set a log duration,
1. In Standby mode, press [
]
→
Log.
2. Press <Options
>
→
→
Settings
.
Filter log events
3. Press <Options
>
Change
.
1. In Standby mode, press [
]
→
Log.
4. Scroll to a duration and press the
trackball
2. Scroll right to switch to the
communication log.
.
If you select No log, no
communication events will be stored
in the log.
3. Press <Options
>
→
Filter
.
4. Scroll to a filter type and press the
trackball
.
30
Communication
•
•
Receive report: set to receive a
report when the message has been
delivered
Communication options
Text message options
Message validity: set a duration for
the message to be valid; if the
message cannot be delivered within
the specified time, it will be removed
from the message centre
From the Messaging menu, press
<
Options
>
→
Settings
→
Text
message to change the following
options:
•
•
•
Message centres: view all defined
message centres or add a new centre
•
•
•
Message sent as: set to convert text
messages to another format
(press <Options
>
→
Open)
Preferred connection: set a network
connection type
Message centre in use: set a
message centre to use when sending
text messages
Reply via same centre: set to use
the same message centre when
receiving a reply message
Character encoding: set a character
encoding type (Full support for
Unicode reduces your maximum
message length by about one-half)
31
Communication
•
•
Receive adverts: set to receive or
block advertisements
Multimedia message options
From the Messaging menu, press
Receive report: set to receive a
report when the message has been
delivered
<
Options
>
→
Settings
→
Multimedia
message to change the following
options:
•
•
Deny report sending: set to deny
delivery reports for multimedia
messages
•
Image size: set a size for images
added to multimedia messages (when
sending a message to an email
address, the size is automatically set to
Message validity: set a duration for
the message to be valid; if the
message cannot be delivered within
the specified time, it will be removed
from the message centre
Small
)
•
•
MMS creation mode: set the mode
for creating multimedia messages
Access point in use: set an access
point to use when sending multimedia
messages
Email options
•
•
Multimedia retrieval: set an option
for receiving multimedia messages
From the Messaging menu, press
<
Options
>
→
Settings
→
E-mail to
change the following options:
Allow anon. msgs.: set to allow or
deny messages from anonymous
senders
•
Mailboxes: view a list of defined
mailboxes; for each mailbox, you can
set the following options:
32
Communication
Connection settings
attachments (you can specify a size
limit for full messages)
•
Incoming e-mail: set options for
incoming email
•
•
•
Retrieval amount: set a maximum
number of headers to retrieve at one
time
•
Outgoing e-mail: set options for
outgoing email
IMAP4 folder path (IMAP4): set a
path to the folder that will sync with
the server
User settings
•
•
My name: set your user name
Send message: set email to send
immediately or the next time you
connect to the server
Folder subscriptions (IMAP4):
connect to mailbox and update
folders
•
•
•
Send copy to self: set to save
copies of outgoing email
Automatic retrieval
•
E-mail notifications: set to be
Include signature: create a
signature to include in your email
notified when you receive new email
•
E-mail retrieval: set to
automatically retrieve email from the
server
New e-mail alerts: set to show an
icon when you receive new email
Retrieval settings
•
Mailbox in use: set a mailbox for
incoming messages
•
E-mail to retrieve: set to retrieve
email headers or full messages with
33
Communication
•
•
Language: set to receive cell
broadcast messages in All or Selected
languages
Service message options
From the Messaging menu, press
<
Options
>
→
Settings
→
Service
Topic detection: set to automatically
save the topic number when you
message to change the following
options:
receive a cell broadcast message that
does not belong to an existing topic
•
•
Service messages: set to receive
service messages
Download messages: set to
automatically or manually download
new service messages
Other message options
From the Messaging menu, press
<
Options
>
→
Settings
→
Other to
change the following options:
Cell broadcast message options
•
•
Save sent messages: set to save
copies of sent messages
From the Messaging menu, press
<
Options
>
→
Settings
→
Cell
Number of saved msgs.: set a
maximum number of saved messages
to store in the Sent folder; as new
messages are saved, older messages
will be deleted
broadcast to change the following
options:
•
Reception: set to receive cell
broadcast messages
•
Memory in use: set a memory
location to use for storing messages
34
Media
2
Learn to use the media applications on
your device: Music player, Camera,
Gallery, Video Editor, Flash Player,
RealPlayer, Recorder, and PC Studio.
Add files to the music library
To automatically add files to the music
library,
1. Add music files to your device.
2. In Standby mode, press [
Music player
]
→
Media
Music player
→
.
With Music player, you can play MP3 or
AAC music files.
3. Press <Options
>
→
→
Music library
.
4. Press <Options
>
Update Music
library
.
Add files to your device
You can add music files to your device by
downloading them from the internet or
transferring them from a computer via PC
Studio (see PC Studio help) or a microSD
memory card, or Windows Media Player.
Play music files
1. In Standby mode, press [
]
→
Media
→
Music player
.
2. Press <Options
>
→
Music library
.
35
Media
3. Press <Options
>
→
→
Update Music
You can also access the following
options:
library
4. Scroll to a playlist.
5. Press <Options
.
• To play tracks in random, press
<
Options
• To play on track or all tracks
repeatedly, press <Options
Loop
>
→
Random play.
>
Play.
6. Use the following during playback:
>
→
.
Action
Function
• To close the music player, leaving
music still in the background, press
Press the
trackball
Pause or resume
playback (Pausing
playback is not available
for mmf files)
<
Options
>
→
Play in background.
Create a playlist
Scroll up
Skip backward
Skip forward
To create a custom playlist,
1. In Standby mode, press [
Scroll
down
]
→
Media
→
Music player
.
Press
[Volume]
Adjust volume up or
down
2. Press <Options
>
→
Music library
→
Track lists
.
Press [0]
Stop playback
3. Press <Options
>
→
New track list
→
a memory type (if necessary).
36
Media
4. Enter a name for the playlist and press
the trackball
3. Aim the lens at the subject and make
adjustments (see "Use the keypad in
.
5. Scroll to the new playlist and press the
trackball
.
4. Press the trackball or [Camera] to
capture the image.
6. Press <Options
>
→
Add tracks.
7. Scroll to a track and press the trackball
to add the track to the playlist.
Use the keypad in Camera mode
Action
Function
Scroll left Zoom in or out
or right
Camera
Scroll
down
Switch to Camcorder mode
Your device allows you to take digital
photos (jpg format) or record videos
(mp4 format).
Press [1]
Switch between Sequence
mode and Normal mode
Press [
2
]
]
Turn the flash on or off
Capture a photo
Press [
3
Change the memory where
the photo is saved
1. In Standby mode, press [
Camera
]
→
Media
→
.
Press [4]
Adjust the brightness
2. Rotate the device 90°
counterclockwise (to the left).
37
Media
Record a video
Action
Function
1. In Standby mode, press [
]
→
Media
Press [6]
Change the white balance
mode
→
Camera.
2. Rotate the device counterclockwise (to
the left).
Press [
7
]
]
Change the colour tone
Press [
8
Set the time delay before
taking a photo
3. Scroll right (toward the alphanumeric
keys) to launch the camcorder.
Press [ ] See adjustment shortcuts
Press [ Change the camera settings
4. Aim the lens at the subject and make
any adjustments (see "Use the keypad
0
]
X
Press [ ] Hide or show the icons on
the screen
5. Press the trackball or [Camera] to
begin recording.
View a photo
6. Press [Camera] to stop recording.
1. In Standby mode, press [
Gallery Images
]
→
Media
→
→
.
Use the keypad in Camcorder
mode
2. Scroll to an image and press the
trackball.
Action
Function
Scroll left Zoom in or out
or right
38
Media
Play a video
Action
Function
1. In Standby mode, press [
]
→
Media
Scroll up Switch to Camera mode
→
Gallery
→
Video clips.
Press [
Press [
Press [
1]
2]
3]
Mute or unmute the audio
Turn the flash on or off
2. Scroll to a video and press the
trackball.
Change the memory where
the video is saved
Press [
4
]
]
Adjust the brightness
Gallery
Press [
6
Change the white balance
mode
You can manage all your media files and
streaming internet links from the Gallery.
Press [
7
]
Change the colour tone
Press [ ] See adjustment shortcuts
Press [ Change the camera settings
Open a media file
0]
1. To open the Gallery, press [
]
→
X
Media Gallery. Your media files are
→
Press [ ] Hide or show the icons on
the screen
automatically organised by file type.
2. Scroll to a media folder and press the
trackball
.
3. Scroll to a media file and press the
trackball
.
39
Media
3. Scroll to a link and press the trackball
.
Add a streaming internet link to
the Gallery
RealPlayer will launch and ask if you
want to connect to the internet.
1. In Standby mode, press [
Gallery
]
→
Media
→
.
4. Press <Yes>.
2. Scroll to the Streaming links folder
and press the trackball
.
Video Editor
3. Press <Options
memory type (if necessary).
>
→
New link
→
a
With Video Editor, you can edit or make
videos by combining photos or videos.
4. Enter a name and web address and
press the trackball
.
Crop a video
Play streaming content from the
internet
1. In Standby mode, press [
]
→
Media
→
Video Editor Edit video.
→
1. In Standby mode, press [
Gallery
]
→
Media
2. Select a video file.
→
.
3. Press the trackball to start playback.
2. Scroll to the Streaming links folder
4. Mark the beginning and end of the new
video:
and press the trackball.
40
Media
• Press <Start> at the point where
4. Press <Options
>
→
Audio and choose
you want the new video to begin.
one of the following options:
• Press <End> at the point where you
want the new video to end.
•
•
Audio dubbing: add one of the
sounds you have saved
Live dubbing: add audio by
recording a new sound
5. Press <Options
>
→
Settings and
change the properties for saving the
video file, such as image quality, name
prefix, and storage location.
5. To add an existing sound, press
Options Start dubbing
sound. To add a new sound, press
Options Live dubbing and
record a sound.
<
>
→
→
a
6. When you are finished, press
<
>
→
<
Options
>
→
Save.
After saving the new video, the phone
plays the video automatically.
After adding the sound, the phone
plays the video automatically.
6. Press <Options
>
→
Settings and
Add audio to a video
change the properties for saving the
video file, such as image quality, name
prefix, and storage location.
1. In Standby mode, press [
]
→
Media
→
Video Editor Edit video.
→
2. Select a video file.
3. Press the trackball to start playback.
7. When you are finished, press
<
Options
>
→
Save.
41
Media
• To add audio to your slideshow, press
Options Narration Insert
Make a slideshow
<
>
→
→
.
You can combine photos to make a
slideshow with your favourite photos.
• To set the intervals between images,
press <Options Duration
>
→
.
1. In Standby mode, press [
Video Editor Make photo
movie
]
→
Media
• To change the order of photos, press
Options Move
→
→
<
>
→
.
.
• To change the properties for saving
the video file, such as image quality,
name prefix, and storage location,
2. Select the photos you want and press
Done>.
<
3. Use the following options:
press <Options
>
→
Settings.
• To change the color tone or apply a
4. When you are finished, press
special effect, press <Options
>
→
<
Options Save.
>
→
Effect
.
• To insert a photo or a text, press
Options Insert Insert
photos or Insert text clip
Make a storyboard
<
>
→
→
You can combine photos and videos to
make a storyboard.
.
• To change how your slideshow plays
from one video clip or photo to the
1. From the Video Editor main view,
select Storyboard
.
next, press <Options
>
→
Transition
.
42
Media
RealPlayer®
2. Select the photos and videos you want
and press <Done>.
Your device includes RealPlayer for
You can use the same options as when
making a photo movie. See the
previous section. Additionally, you can
use Edit clip to crop a selected video
or add audio to the video.
viewing many types of media files and
streaming content from the internet.
RealPlayer supports files with the
following extensions: 3gp, mp4, rm, ram,
ra, and rv.
3. When you are finished, press
<
Options
>
→
Save.
Play a media file in RealPlayer
1. In Standby mode, press [
RealPlayer
]
→
Media
→
.
Flash® Player
2. Press <Options
>
→
Open
→
Most
recent clips or Saved clip
.
Your device includes Flash Player for
viewing Flash (swf) files.
3. Locate a media file and press the
trackball
.
To view a Flash file,
4. Use the following during playback:
1. In Standby mode, press [
Flash Player
]
→
Media
→
.
Action
Function
2. Scroll to a flash file and press the
trackball (scroll right to locate files
stored on a memory card).
Press the
trackball
Pause or resume
playback
43
Media
Recorder
Action
Function
You can use the Recorder to record and
play back voice memos and sound clips.
Press [
Press [
Press [
Press
5
0
2
]
]
]
Skip forward
Skip backward
Change a view mode
Record a voice clip
Adjust volume up or
down
1. In Standby mode, press [
Recorder
]
→
Media
[Volume]
→
.
2. Press the trackball to begin the
recording.
Play streaming web content with
RealPlayer
3. When you are finished recording, press
Stop>.
When you open a link to streaming web
content via your web browser, RealPlayer
will buffer and play the content (see
<
The voice clip is automatically saved.
X
55). You can
then use the softkeys and volume key to
control options for the streaming content.
Play a voice clip
1. In Standby mode, press [
Recorder
]
→
Media
→
.
2. Press <Options
>
→
Go to Gallery.
44
Media
3. Scroll to a voice clip and press the
trackball
Install PC Studio
.
1. Insert the PC Studio CD into a
Windows-compatible computer.
The playback begins automatically.
4. Follow the onscreen guide to control
the playback.
2. Select a language for the setup
program.
3. Follow the onscreen instructions.
During installation, the setup program
will automatically install the necessary
USB drivers.
PC Studio
PC Studio, which is included on the PC
Studio CD-ROM, is a Windows-based
program that allows you to manage your
personal information and sync files to
your device. For more information, install
the program and refer to the PC Studio
help.
Use PC Studio
To connect your phone to a computer
with PC Studio, you must change the
phone’s USB mode (see "Use PC Studio,"
X
65).
45
Personal Productivity
3
Learn to manage contacts, schedule
calendar events, create notes, and use
2. Press <Options
>
→
New contact.
3. Enter contact information.
To insert additional information
®
®
QuickOffice and Adobe Reader .
fields, press <Options
detail a detail type. To assign an
image to the contact card, press
Options Add thumbnail
an image.
>
→
Add
→
Contacts
<
>
→
→
Learn to use contact cards and groups to
store personal information, such as
names, phone numbers, and addresses.
4. When you are finished entering
information, press <Done> to save
the contact card.
Create a new contact card
You can store contact cards in your
device's memory or on a SIM card.
Create a new contact card on a SIM
card
Create a new contact card in the
device's memory
1. In Standby mode, press [
Contacts
]
→
.
1. In Standby mode, press [
Contacts
]
→
2. Press <Options
SIM directory (SIM card).
>
→
SIM contacts
→
.
46
Personal Productivity
3. Press <Options
>
→
New SIM
Copy contact cards
contact
.
To copy contact cards from one memory
location to another,
4. Enter contact information.
5. When you are finished entering
information, press <Done> to save
the contact card.
1. Open a contact list:
a. In Standby mode, press [
Contacts (device memory).
]
→
b. In Standby mode, press [
]
→
Search for a contact card
Contacts
contacts
card).
→
<
Options
>
→
SIM
1. In Standby mode, press [
Contacts
]
→
→
SIM directory (SIM
.
2. Enter the first few characters of the
contact name in the search box.
2. Scroll to a contact and press
Options Copy to contacts or
Copy to SIM directory
<
>
→
.
The contact cards are listed,
highlighting the name that most
closely matches your input.
If you have inserted a memory card,
you can also copy contacts to and
from the card: press <Options
Copy To memory card or From
memory card
>
→
3. Scroll to a contact and press the
trackball to open it.
→
.
47
Personal Productivity
Set a default number or address
Assign a speed dial number to a
contact card
Some contact cards may include more
than one number or address.
You can assign speed dial numbers to up
to eight contact cards ([
] is reserved as a speed dial number
for your voice mail.
2] through [9]);
To assign a single number or address as
the default,
[1
1. Open a contact list (see "Copy contact
To assign a speed dial number,
1. In Standby mode, press [
Contacts
2. Scroll to a contact and press the
trackball
3. Scroll to a phone number and press
Options Assign speed dial
4. Scroll to a speed dial number and
press the trackball
X
47).
]
→
2. Scroll to a contact and press the
.
trackball
3. Press <Options
4. Scroll to a default type and press the
.
>
→
Defaults.
.
trackball
.
<
>
→
.
5. Scroll to a number or address and
press the trackball
.
.
48
Personal Productivity
Assign a ringtone to a contact
card or group
For an individual contact, your device
will use the ringtone that was
assigned last to the contact card. For
example, if you assign a ringtone to a
group and then assign another
ringtone to a contact card within that
group, the device will use the ringtone
assigned to the contact card when
that contact calls.
You can assign a ringtone to any contact
card or group.
To assign a ringtone,
1. In Standby mode, press [
Contacts
]
→
.
2. Scroll to a contact or group and press
the trackball
.
Create a contact group
3. Press <Options
>
→
Ringing tone.
You can create groups of contacts and
send emails or messages to the entire
group.
4. Scroll to a ringtone and press the
trackball.
1. In Standby mode, press [
Contacts
]
→
.
2. Scroll right to switch to the group list.
3. Press <Options New group
4. Enter a name and press the trackball
>
→
.
.
49
Personal Productivity
5. Scroll to your new group and press the
trackball to open it.
3. Scroll to a sync profile or device and
press the trackball.
To change sync profiles or settings,
6. Press <Options
>
→
Add members.
X
7. Scroll to each contact you want to add
and press the trackball
.
8. When you are finished selecting
contacts, press <OK> to save them to
the group.
Calendar
Use the calendar to keep track of
appointments, birthdays, or other events.
Sync your contacts
Create a Calendar event
To sync your contacts by using the
current sync profile,
1. In Standby mode, press [
Organiser Calendar
]
→
→
.
1. In Standby mode, press [
Contacts
]
→
.
2. Scroll to a date and press <Options
>
→
New entry
→
an event type:
2. Scroll to a contact and press
Options Synchronisation
Start
<
>
→
→
•
Meeting - a reminder at a specific
date and time
.
•
Memo - general text
50
Personal Productivity
•
•
Anniversary - an annual reminder
of a special date
Stop an event alarm
If you set an alarm for a calendar event,
the alarm will sound for one minute at
the specified time. To stop the alarm,
press <Stop>. To silence the alarm,
press <Silence>. To set the alarm to
To-do - a note about a particular
task
3. Complete the fields and adjust the
settings for your event.
sound again shortly, press <Silence
>
→
<
Snooze a snooze period.
>
→
4. When you are finished, press <Done
>
to save your entry.
Change Calendar Options
In the Synchronisation field, you
can specify whether an event is
Private (seen only by you), Public
(seen by anyone with access to your
data after you sync), or None (not
synchronised).
From any calendar view, press
<
Options
>
→
Settings to change the
following options:
•
•
•
Calendar alarm tone: set a
personalized alarm tone
Alarm snooze time: set a snooze
duration for calendar alarms
Change the Calendar view
1. In Standby mode, press [
Organiser Calendar
]
→
Default view: set the view that is
→
.
shown when you open the Calendar
2. Press <Options a view type.
>
→
51
Personal Productivity
•
•
Week starts on: set a day to show
first in week view
4. While viewing a document, press
Options> to use the following
<
options:
Option
Zoom
Week view title: set the title of the
week view to a week number or date
Description
Magnify part of a
document
Quickoffice®
Search
options
Search for text
With Quickoffice, you can open Word,
Excel, and PowerPoint files on your
device.
Go to
Jump to the top or
bottom of a document
Start auto- Automatically scroll
Open a Quickoffice document
scroll
Resize
Pan
through a document
Resize a column or row
Move right or left
1. In Standby mode, press [
Organiser Quickoffice
]
→
→
.
2. Scroll right to switch applications
(Quickword, Quicksheet, and
Quickpoint).
Full screen Use the full display for
viewing
3. Scroll to a document and press the
trackball
.
52
Personal Productivity
To open a PDF document,
1. In Standby mode, press [
Organiser Adobe PDF
2. Press <Options Browse for file
3. Scroll to a memory type and press the
trackball
4. Scroll to a file type and press the
trackball
Update Quickoffice
With Quickmanager, you can download
program updates, new Quickoffice
products, or special offers.
]
→
→
.
>
→
.
To update Quickoffice,
.
1. In Standby mode, press [
Organiser Quickoffice
]
→
→
.
.
2. Scroll right to switch to
Quickmanager
.
5. Scroll to a file and press the trackball
.
3. Scroll to a Quickmanager item and
press the trackball
6. While viewing a document, press
.
<Options> to use the following
options:
Option
Zoom
Description
Adobe® Reader®
Magnify part of a
document
With Adobe Reader, you can open and
view PDF documents.
Find
Search for text
53
Personal Productivity
3. Enter text.
Option
View
Description
4. When you are finished entering text,
press <Done> to save the note.
Use the full display for
viewing or rotating the
document
Sync notes with other devices
Go to
Skip to another page
1. In Standby mode, press [
Organiser Notes
]
→
→
.
2. Scroll to a note and press <Options
>
Notes
→
Synchronisation Start
→
.
With Notes, you can create text notes
and sync them with other devices.
3. Scroll to a sync profile or device and
press the trackball
.
Create a note
1. In Standby mode, press [
Organiser Notes
]
→
→
.
2. Press <Options
>
→
New note.
54
Web
4
Your device allows you to connect to the
wireless web with the built-in web
browser. To connect to the web, you
must:
Browse a web page
1. In Standby mode, press [
]
→
Web.
The device shows a list of bookmarks
and folders.
• Subscribe to a wireless network that
supports data calls
2. Access a web page:
• Activate the data service for your SIM
card
• Scroll to a bookmark or folder and
press the trackball
• Obtain an internet access point from a
service provider
• Enter a web address and press the
trackball
• Define your web settings
3. While browsing a web page, press and
hold the trackball to display or hide the
toolbar:
Your device is preset to access the
wireless web. If you cannot connect to
the web, contact your service provider
to download new browser settings.
Icon
Description
Frequently used links
Forward
55
Web
While browsing, press <Options> to
access the following:
Icon
Description
Home
•
Go to web address: move to the
entered web page
Page overview
Reload
•
•
Bookmarks: open the bookmark list
Save as bookmark: create a new
bookmark for the current page
Find
•
•
Rotate screen: switch to wide view
Window: block all pop-ups while
browsing the wireless web, or allow the
pop-ups to display on the browser
Stop
4. To close the web connection, press
<
Exit>.
•
•
Clear privacy data: delete data
transmitted while browsing the
wireless web, such as cookies, data in
the cache, history, and form or
password data
• If your device shows "Memory full",
close other running applications to
free up the system memory, then
restart the browser.
• The device will show a security
indicator ( ) whenever you have
established an encrypted
Tools: save pages for viewing offline,
send a web page, or view information
about a web page
connection.
•
•
Find: search for text on a web page
Settings: change the browser settings
56
Web
•
•
•
•
WLAN network mode: choose a
WLAN mode
Connect to a wireless
LAN (WLAN)
WLAN security mode: choose a
security level of a WLAN network
To create a new access point connection
for a WLAN:
WLAN security settings: change
the security settings
1. In Standby mode, press [
]
→
Settings
points
point
→
Connection
Options
→
Access
Homepage: set a homepage for
access points that connect to web
services
→
<
>
→
New access
.
2. Edit the following settings:
3. When you are finished, press <Back>.
•
Connection name: set a name for
the access point connection
To connect to a WLAN:
•
•
Data bearer: select Wireless LAN
1. In Standby mode, press [
2. Access a web page:
]
→
Web.
WLAN network name: set a name
for a WLAN network
• Scroll to a bookmark or folder and
press the trackball
•
WLAN network status: set to
Hidden if the WLAN network you are
connecting to is hidden or Public if it
is not hidden
• Enter a web address and press the
trackball
57
Web
3. If necessary, select Search for WLAN
to select from all available WLANs.
Add a bookmark
1. In Standby mode, press [
]
→
Web.
4. Enter your password (if necessary).
2. Press <Options
>
→
Bookmark
manager Add bookmark
→
.
Change browser
settings
3. Enter the bookmark name, address,
and access point, as well as a user
name and password if desired.
From the browser, press <Options
Settings to access the following:
>
→
4. Press <Options
>
→
Save.
•
•
•
•
General: set access point, homepage,
history, security, and Java options
Use a bookmark
Page: set options for loading and
displaying web content
While browsing, you can also access
Privacy: set bookmark and cookie
options
X
>
→
Bookmarks
to access the following:
Web feeds: set the page to update
automatically
Icon Description
Start page of the access point
58
Web
Save a web page
Icon
Description
1. Use your browser to access the web
page (see "Browse a web page,"
Folder of automatic bookmarks
X
55).
Folder you have created
2. Press <Options
>
→
Tools
→
Save
Default folder
Web feed folder
Bookmark
page
.
The web page is saved to your device.
View a saved web page
1. In Standby mode, press [
]
→
Web.
2. Scroll to Saved pages and press the
Save a web page and
view it offline
trackball
.
3. Scroll to a saved web page and press
When you save a web page, you can view
a copy of it offline without connecting to
the web. The saved copy will not update
automatically, so you must reconnect to
the web periodically to retrieve the
current version.
the trackball
.
4. To update the web page, press
<
Options Navigation options
>
→
→
Reload
.
59
Web
Download files from the
web
When you download files from the web,
your device stores them in a
corresponding folder in the Gallery. For
example, your device will store
downloaded images in the Images
folder.
Files you download from the web
can include viruses that will damage
your device. To lessen your risk,
only download files from sources
you trust.
Some media files include Digital
Rights Management to protect
copyrights. This protection may
prevent you from downloading,
copying, modifying, or transferring
some files.
60
Connectivity
5
Learn to transfer data to and from your
device via the Bluetooth wireless feature
or the PC data cable.
2. Scroll to Bluetooth and press the
trackball
.
3. To make your device visible to others,
scroll to My phone's visibility and
press the trackball
.
Use the Bluetooth
wireless feature
4. Select a visibility option and press the
trackball
.
You can connect with other Bluetooth-
enabled wireless devices over a distance
of 10 metres (30 feet). Walls or other
obstacles between devices may block or
impair the wireless connection.
Search for and pair with a
Bluetooth-enabled device
1. In Standby mode, press [
]
→
Connectivity Bluetooth
→
.
2. Scroll right to open the paired device
list.
Turn on the Bluetooth wireless
feature
1. In Standby mode, press [
]
→
Connectivity Bluetooth
→
.
61
Connectivity
3. Press <Options
>
→
New paired
5. Enter the Bluetooth passcode and
press the trackball
device
.
.
Your device searches for and displays a
list of Bluetooth-enabled devices:
To pair with another Bluetooth-
enabled device, both devices must
use the same passcode. Headsets or
hands-free car kits may use a fixed
Icon
Device type
passcode, such as 0000
.
Mobile phone
6. To allow the device to send and receive
data without confirmation, press
Computer
<Yes>. Otherwise, press <No> to
require confirmation.
Headset
Hands-free car kit
Audio device
Unknown device
Change paired device options
From the paired device list, press
<Options> to access the following:
•
New paired device: search for
another Bluetooth-enabled device
•
Connect to audio device: pair with a
headset or car kit
4. Scroll to a device and press the
trackball
.
62
Connectivity
•
•
Assign short name: set a short name
for a paired device
4. Scroll to a paired device and press the
trackball.
Set as authorised/Set as
5. If necessary, enter a passcode and
press <OK>.
unauthorised: set to allow another
device to connect automatically or
require permission
Receive data via the Bluetooth
wireless feature
•
•
Delete: remove a device from the list
Delete all: remove all devices from
the list
1. When another device attempts to
access yours, press <Yes> to permit
the connection.
•
Exit: close the paired device list
2. Press <Yes> again to confirm that you
are willing to receive data from the
device (if necessary).
Send data via the Bluetooth
wireless feature
1. Select a file or item to send.
Accepted items are placed in your
Inbox. The
received via Bluetooth.
icon indicates messages
2. Press <Options
>
→
Send.
3. Scroll to Via Bluetooth and press the
trackball
.
63
Connectivity
Activate Remote SIM mode
Connect via USB
To use Remote SIM mode with a
compatible hands-free car kit,
Set a default action for your USB
connection
1. Connect to your device from an
authorised hands-free car kit.
To set your device to perform a default
action when you connect the device to a
computer with the PC data cable,
2. In Standby mode, press [
Settings Connection
Remote SIM mode
]
→
→
→
Bluetooth
On
1. In Standby mode, press [
Connectivity USB
]
→
→
→
.
→
.
You can now make or answer calls only
with the connected hands-free car kit
via the SIM card on your device.
2. Set the default USB mode (Media
player PC Studio, or Data
,
transfer).
To deactivate it, press [
remote SIM mode
]
→
Exit
.
You can also set your device to Ask
on connection, instead of using a
default USB mode. If you use this
setting, your device will prompt you to
choose the USB mode every time you
connect to a computer.
64
Connectivity
3. Select Sync digital media files to
this device when a pop-up window
appears on your PC.
Use PC Studio
1. Change the USB connection to PC
Studio
.
4. Enter the name of your device and
2. Connect your device to a computer
with the PC data cable.
click Finish
.
5. Select and drag the music files you
want to the sync list.
3. Run PC Studio and manage personal
data and media files.
6. Click Start Sync
.
Refer to the PC Studio help for more
information.
7. When synchronisation is finished,
disconnect the device from the PC.
Synchronise with Windows
Media Player
Copy music files to a memory
card
You can copy music files to the device by
synchronising with Windows Media Player
11.
1. Insert a memory card into the device.
2. Change the USB connection to Data
1. Change the USB connection to Media
transfer
.
player
.
3. Connect your device to a computer
with the PC data cable.
2. Connect your device to a computer
with the PC data cable.
65
Connectivity
4. Select Open folder to view files
when a pop-up window appears on
your PC.
To create a new sync profile,
1. In Standby mode, press [
]
→
Connectivity
→
Sync
.
5. Copy files from the PC to the memory
card.
2. Press <Options
>
→
New sync
profile
.
6. When you are finished, disconnect the
device from the PC.
3. Press <Yes> to copy settings from an
existing profile or <No> to define new
settings.
4. Define the following:
Synchronise your device
•
•
•
Sync profile name: set a name for
the profile
Learn to synchronise the data on your
device with data on a computer or other
wireless device.
Applications: set the applications to
sync
Connection settings: set options
Create a new sync profile
for connecting to the network
Your device includes a sync profile for PC
Studio.
5. Press <Back> to save your new
profile.
66
Connectivity
Synchronise data
1. Connect your device to another
Bluetooth-enabled wireless device (see
2. Press [ Connectivity
3. Press <Options Synchronise.
X
61).
]
→
→
Sync.
>
→
4. Scroll to a device and press the
trackball, if necessary.
Your device displays a progress meter
at the bottom of the screen.
After synchronisation is complete, you
can press <Options
>
→
View log to
view a list of data that was changed.
67
Additional Programs
6
Learn to use the Calculator, Clock,
Converter, Voice Signal, GPS data, and
Landmarks.
3. When performing calculations, press
<Options> to access the following:
•
Memory: save, recall, or clear the
calculator’s temporary memory
•
•
Clear screen: clear all calculations
on the screen
Calculator
Last result: insert the result from
the last calculation
To use the calculator,
1. In Standby mode, press [
Organiser Calculator
]
→
→
.
2. Use the alphanumeric keys and the
navigation key to perform basic
mathematical operations.
Clock
In the Clock application, you can adjust
clock settings, set alarms, and create a
world clock.
Press [ ] to insert a decimal. Press
[C] to clear a result. Press [ ] to
switch functions.
Change clock settings
1. In Standby mode, press [
Organiser Clock
]
→
→
.
68
Additional Programs
2. Press <Options
>
X
→
Settings (see
Your current profile setting will not
affect the volume of a clock alarm.
87).
Set a new alarm
1. In Standby mode, press [
Organiser Clock
2. Scroll right to the Alarm view.
3. Press <Options New alarm.
Create a world clock
]
→
With a world clock, you can monitor the
time in another city or country.
→
.
To create a world clock,
>
→
1. In Standby mode, press [
Organiser Clock
]
→
→
.
4. Set alarm details.
2. Scroll right to the World view.
3. Press <Options Add city.
5. Press <Done>.
>
→
Stop an alarm
4. Scroll to a city and press the trackball
or enter the first few letters of the city
name to search the list.
When an alarm sounds, press <Stop> to
end the alarm or <Snooze> to repeat
the alarm after a specified time. You can
delay the alarm (snooze) up to five
times.
5. Repeat steps 3 and 4 to add more
cities, if necessary.
6. When you are finished adding cities,
press <Exit>.
69
Additional Programs
2. Scroll right until the type shows
Currency
Converter
.
With Converter, you can convert
measurements or currencies from one
unit to another. To convert currencies,
you must first set a base currency and
exchange rate.
3. Press <Options
>
→
Currency rates.
4. Scroll to a currency and press
<
Options Rename currency.
>
→
5. Enter the name of the base currency
and press the trackball
.
Add currencies and exchange
rates
6. Press <Options Set as base
>
→
currency
.
The value of the base currency is
always 1. You must enter exchange
rates for other currencies as they
relate to one unit of the base
currency. Exchange rates change
often. To ensure an accurate
conversion, you must enter a current
exchange rate.
7. Press the trackball to confirm.
To add other currencies and exchange
rates,
1. Repeat steps 1-4 above.
2. Enter the name of a new currency and
press the trackball
.
1. In Standby mode, press [
Organiser Converter
]
→
3. Scroll to the new currency and enter
the exchange rate.
→
.
70
Additional Programs
3. Scroll down to Unit and scroll right to
change the base unit, if necessary.
Convert currencies
1. In Standby mode, press [
]
→
Organiser
→
Converter
.
4. Scroll down to Amount and enter the
base amount.
2. Scroll right until the type shows
Currency
.
5. Scroll down to Unit and scroll right to
change the conversion unit, if
necessary.
3. Scroll down to Unit and scroll right to
select a currency to convert.
The device displays the conversion
result.
4. Scroll down to Amount and enter the
amount to convert.
5. Scroll down to Unit and scroll right to
select a currency to convert to.
Voice Signal
The device displays the conversion
result.
With Voice Signal, you can make calls,
retrieve contact information, launch
applications, and send text messages
with voice commands.
Convert measurements
This may not be available
depending on your country or
service provider.
1. In Standby mode, press [
Organiser Converter
]
→
→
.
2. Scroll right to change the type of
measurement.
71
Additional Programs
Use name dialling
Search for contacts
1. In Standby mode, press [
]
→
Tools
1. In Standby mode, press [
]
→
Tools
→
Voice Signal
.
→
Voice Signal.
You will hear, “Say a command.”
You will hear, “Say a command.”
2. After a beep, say “Call” and then a
person’s name stored in Contacts.
2. After a beep, say “Look up” and then
the full name of the contact card (first
name followed by the last name).
3. If there are similar names, the device
shows the 3 best candidates and then
recites the name and number that
most closely matches your command.
3. If there are similar names, the phone
displays the 3 best candidates and
then recites the name and number
that most closely matches your
command.
4. If the name or number is not the one
you want, say “No,” and then repeat
until you hear what you want.
4. If the name or type is not what you
wanted, say “No”, and then repeat
until you hear what you want.
5. When you hear the name you want,
say “Yes.”
5. When you hear the name you want,
say “Yes.”
72
Additional Programs
Open applications by voice
1. In Standby mode, press [
Voice Signal
GPS data
]
→
Tools
You can view GPS data to help you
navigate, show your position, or monitor
trip details. Before you can use GPS data,
you must activate a positioning method
via a Bluetooth wireless connection or a
wireless network connection.
→
.
You will hear, “Say a command.”
2. Say “Open” and then the name of an
application.
For information about mobile
navigation, refer to http://
Send a text message
samsung.navigon.com. This may not
be available depending on your
country or service provider.
1. In Standby mode, press [
Voice Signal
]
→
Tools
→
.
You will hear, “Say a command.”
2. Say “Send SMS” and then the name of
a recipient.
Activate a positioning method
1. In Standby mode, press [
GPS data
]
→
Tools
When the editor opens with the
recipient entered, enter your message
text.
→
.
2. Press <Options
>
→
Positioning
settings
.
73
Additional Programs
3. Scroll to a positioning method
3. Press <Options
>
→
Set destination
(
Integrated GPS
Network based) and press
Options Enable
,
Bluetooth GPS, or
→
Coordinates.
4. Enter the latitude and longitude of
your destination and press the
<
>
→
.
If you enable Bluetooth GPS, you
must pair with a Bluetooth-enabled
device (see "Search for and pair with
trackball
.
Your device will display the direction of
your destination, your current speed,
and the duration of your trip.
X
61).
Once you activate a positioning
method, your device will attempt to
open that connection when you launch
GPS data.
5. To stop the GPS navigation, press
<
Options
>
→
Stop navigation
.
View your current position
1. In Standby mode, press [
GPS data
2. Scroll to Position and press the
trackball
Navigate with GPS data
]
→
Tools
→
.
1. In Standby mode, press [
]
→
Tools
→
GPS data
.
.
2. Scroll to Navigation and press the
trackball
.
74
Additional Programs
Monitor trip details
Landmarks
1. In Standby mode, press [
]
→
Tools
With Landmarks, you can save your
current location or manually enter new
locations.
→
GPS data
.
2. Scroll to Trip distance and press the
trackball
.
To add a landmark,
3. Press <Options
>
→
Start.
1. In Standby mode, press [
Landmarks
]
→
Tools
Your device will track trip details,
including distance, time, and speed.
→
.
2. Press <Options
>
→
New landmark
→
4. To stop monitoring trip details, press
Current position or Enter manually
.
<
Options
>
→
Stop.
To add your current location
automatically, your device must
have an active connection.
3. Enter details about the landmark, if
necessary.
4. When finished entering landmark
information, press <Done>.
75
Managers
7
Learn to manage files, applications,
device configurations, activation keys,
and connections.
5. To open a file or folder from the search
results, scroll to the file or folder and
press the trackball
.
Create a new folder
File manager
1. In Standby mode, press [
]
→
Organiser
→
File manager
.
With File manager, you can search for
and organise your files or folders.
2. Press <Options
>
→
New folder
.
3. Enter a folder name and press the
trackball.
Search for a file or folder
1. In Standby mode, press [
]
→
Organiser File manager
→
.
Move a file to a folder
2. Press <Options Find
>
→
.
1. In Standby mode, press [
]
→
Organiser File manager
→
.
3. Scroll to a memory type and press the
trackball
.
2. Scroll to a file or folder and press
Options Move to folder
<
>
→
.
4. Enter text in the search field and press
the trackball
.
76
Managers
3. Scroll to a folder and press the
trackball
Install a new application
1. In Standby mode, press [
Installations App. mgr.
2. Scroll to an application and press
Options Install
.
]
→
→
4. If necessary, scroll to a subfolder and
press the trackball
.
<
>
→
.
5. Press the trackball
.
3. Follow any onscreen prompts and
instructions.
Application manager
The application manager
automatically tries to verify an
application's digital signatures and
certificates during installation and will
show a warning if the application does
not meet normal security
requirements. To protect your device
and your data, do not install
applications that do not have valid
digital signatures or certificates.
Your device supports applications made
for the Symbian OS and the Java
platform, Micro Edition (J2ME™). Your
device will not support applications made
for other operating systems or Java
platforms (including PersonalJava™). To
download applications to your device, see
X
60.
77
Managers
Change installation options
Device manager
From the Application manager menu,
This feature is network-dependent and
may not be available from your service
provider. If available, Device manager
allows your service provider to assist you
with device configurations. Before you
can start a configuration session, you
must define a server profile.
press <Options
>
→
Settings to access
the following:
•
Software installation: set to allow or
block installations
•
Online certificate check: set to
check for online certificates when
installing applications
Define a server profile
•
Default web address: set a default
web address for checking online
certificates
1. In Standby mode, press [
Device mgr.
]
→
Tools
→
2. Press <Options
>
→
New server
Remove an application
profile
.
1. In Standby mode, press [
]
→
3. Set the following server options
according to the instructions provided
by your service provider:
Installations
→
App. mgr.
2. Scroll to an application and press
<
Options Remove.
>
→
•
Server name: name the server
3. Press <Yes> to confirm.
78
Managers
•
•
Server ID: set the ID of the remote
server
•
•
Auto-accept all requests: set to
automatically accept new
configuration requests
Server password: set the password
that must be used by the device
manager to sync your device
Network authentication: set to
require network authentication
•
•
Access point: set an access point
4. When you are finished setting the
options, press <Back>.
Host address: set the web address
of the host server
Start a configuration session
•
•
•
•
Port: set a port to use for the device
manager
1. In Standby mode, press [
Device mgr.
]
→
Tools
User name: set a user name for this
profile
→
2. Scroll to a server profile and press
Options Start configuration.
Password: set a user password for
this profile
<
>
→
3. Press <Yes> to confirm.
Allow configuration: set to allow
the server to configure your device
4. If required, scroll to an access point
and press the trackball
.
79
Managers
Restore an expired activation
key
Activation key manager
When you download digital content, you
may need to purchase an activation key
from the website that allows you to
access the file.
When your activation key expires, you
must purchase additional rights to use
the media file.
To restore an expired activation key,
View activation keys
1. In Standby mode, press [
Actv. keys
]
→
Tools
→
.
1. In Standby mode, press [
Actv. keys
]
→
Tools
→
.
2. Scroll to Invalid keys and press the
trackball
.
2. Scroll to a folder and press the
trackball
:
3. Scroll to an activation key and press
Options Get new key
•
•
Valid keys: all valid activation keys
<
>
→
.
Invalid keys: expired activation
4. Press <Yes> to confirm.
5. Follow the onscreen instructions.
keys
•
Not in use: activation keys of media
files that are no longer stored on the
device
3. Scroll to an activation key and press
the trackball
.
80
Managers
Back up data to a memory card
1. In Standby mode, press [
Organiser Memory
Memory card manager
]
→
With Memory card manager, you can
back up and restore data, protect a
memory card with a password, or view
memory details. Before you can use a
memory card for the first time, you must
format the card.
→
.
2. Press <Options
>
→
Back up phone
memory
3. Press <Yes> to confirm.
Restore data from a memory
card
Format a memory card
Your device supports FAT16 or FAT32
file systems.
1. In Standby mode, press [
Organiser Memory
]
→
→
.
1. Insert a memory card (see the Quick
Start Guide).
2. Press <Options Restore from
>
→
card
.
2. In Standby mode, press [
Organiser Memory
]
→
3. Press <Yes> to confirm.
→
.
3. Press <Options
>
→
Format memory
card
.
4. Press <Yes> to confirm.
81
Managers
Protect a memory card with a
password
View memory details
To view the used and available memory
on your memory card,
Devices that do not support this
feature, such as personal computers,
cannot read the card while the
password protection is active. Remove
the password protection from the card
to use it with those devices.
1. In Standby mode, press [
Organiser Memory
]
→
→
.
2. Press <Options Memory details.
>
→
1. In Standby mode, press [
Organiser Memory
]
→
→
.
Connection manager
2. Press <Options Set password.
>
→
With Connection manager, you can view
the details of data connections and close
open connections.
3. Enter and confirm a password (up to 8
characters).
4. To remove the password, press
View connection details
<
Options
>
→
Remove password.
The device will prompt you to enter
and confirm the password again.
1. In Standby mode, press [
Connectivity Conn. mgr.
data connections
]
→
→
→
Active
.
82
Managers
2. Scroll to a connection and press
Options Details to access the
following:
•
Shared: the number of applications
using the same connection
<
>
→
•
Name: the current access point or
modem (if using a dial-up
connection)
Close an open connection
1. In Standby mode, press [
Connectivity Conn. mgr.
2. Scroll to a connection and press
Options Disconnect
3. Press <Yes> to confirm.
]
→
→
•
•
•
Bearer: the type of data connection
Status: the connection status
<
>
→
.
Total: the total amount of data
received and sent
•
Received: the amount of data
received
View the status of a WLAN
network
•
•
Sent: the amount of data sent
1. In Standby mode, press [
Connectivity Conn. mgr.
Available WLAN networks
]
→
Duration: the length of time the
connection has been open
→
→
.
•
•
Speed: current upload and
download speeds
The device shows a list of available
WLAN networks.
Acc. pt.: name of the access point in
use
83
Managers
2. Scroll to a network and press
<
Options
>
→
Details to access the
following:
•
•
•
•
•
Network: the network name
Signal: the signal strength
Mode: the network mode
Security: the connection security
Coverage: the number of access
points to provide the network
coverage
•
Speed: the network speed
84
Settings
8
Learn about your device settings. To
access your device settings,
Display
•
•
•
Brightness - set the brightness of the
display
1. In Standby mode, press [
Settings
]
→
.
Font size - set the size of the text on
the display
2. Scroll to a category (General
Connection, or Applications) and
press the trackball
,
Phone,
Welcome note/logo - set a text note
or image that shows when you turn on
the device
.
You can also access some settings
•
•
Backlight on time - set the delay
before the backlight dims
from other menus: press <Options
>
→
Settings.
Dim time - set the delay before the
dimmed backlight turns off
General settings
Standby mode
•
Active standby - set to show
application shortcuts and calendar
events in Standby mode
Personalisation
Control the appearance and behavior of
your display, Standby mode, tones, and
language (for Themes settings, see the
Quick Start Guide).
•
Shortcuts - set the softkey shortcuts
for Standby mode
85
Settings
•
Active standby apps. - set the
application shortcuts to show in
Standby mode
•
Vibrating alert - set a vibrating alert
for incoming voice calls and text or
multimedia messages
•
•
Keypad tones - set the volume for
keypad tones
Tones
•
Ringing tone - set a ringtone for
Warning tones - set the device to
sound a warning tone (e.g., when the
battery is low)
incoming voice calls
•
Video call tone - set a ringtone for
incoming video calls
Language
•
•
Ringing type - set a ring type
•
•
•
Phone language - set a display
language (for all menus and
applications)
Ringing volume - set the volume for
ringtones and message alerts
•
•
•
•
Message alert tone - set a tone for
incoming text or multimedia messages
Writing language - set a language for
writing messages (for all text editors
and dictionaries)
E-mail alert tone - set a tone for
incoming email messages
Predictive text - turn Predictive text
Calendar alarm tone - set a tone for
calendar events
on or off (for all text editors)
Clock alarm tone - set a tone for a
Trackball sensitivity
clock alarm
Adjust the sensitivity level of the
trackball to better recognise your press
86
Settings
•
•
Workdays - set the days of the week
to sound alarms
Date and time
Control the appearance and behavior of
the date, time, and alarms.
Network operator time - set the
network to automatically update the
time and date
•
Time - set the current time (press [C]
to switch between am and pm)
•
•
•
Time zone - set the time zone
Enhancement
Date - set the current date
Set the device to use either the headset
or a wireless car kit as the default
enhancement: press <Options
Date format - set a display format for
the date
>
→
Set
as default. You can change the following
settings for either enhancement:
•
•
•
•
Date separator - set a date separator
Time format - set a time format
•
•
Default profile - set the default
profile for the enhancement
Time separator - set a time separator
Clock type - set a clock type for the
display
Automatic answer - set the
enhancement to automatically answer
incoming calls (when connected to the
device)
•
•
Clock alarm tone - set a tone for a
clock alarm
Alarm snooze time - set the delay for
alarms to repeat
87
Settings
•
•
•
Lock if SIM card changed - set the
device to lock automatically when the
SIM card is changed
Security
Set security codes and manage security
certificates or security modules.
Closed user group - set the device to
restrict calls to and from a selected
group of users
Phone and SIM card
•
PIN code request - set the device to
request a PIN code each time you turn
it on
Confirm SIM services - set the
device to show a confirmation message
when you use a SIM service
•
•
•
PIN code - set a PIN code for the
device
Certif. management
PIN2 code - set a PIN2 code (supplied
with some SIM cards)
Your device uses digital certificates to
verify the identity and authenticity of
various online services and software.
These certificates help keep your
personal data secure and help you avoid
viruses and other dangerous software. In
Certificate management, you can view
certificate details, delete certificates, or
change the following trust settings:
Phone autolock period - set the
delay before the device locks
automatically
•
•
Lock code - set a lock code for the
device
Auto key lock - set to lock the keypad
automatically when the display turns
off
•
Internet - set the device to verify web
servers that use this certificate
88
Settings
•
•
Online certif. check - set the device
to check the certificate against a list of
revoked certificates
Positioning methods
•
•
•
Integrated GPS - set the device to
use the internal GPS to retrieve global
positioning information
VPN - set the device to verify VPN
connections that use this certificate
Bluetooth GPS - set the device to use
the Bluetooth feature to retrieve global
positioning information
Security module
Manage security modules on your device.
Network based - set the device to
use the cellular network to retrieve
global positioning information
Factory settings
Reset settings to their factory defaults.
You must enter the lock code to reset the
device. After entering the code, the
device will restart.
Positioning server
•
Access point - set an access point for
the global positioning server
•
Server address - set a web address
for the global positioning server
Positioning
Control the methods and servers your
device uses to retrieve global positioning
information.
89
Settings
•
•
•
•
Show call duration - set to show the
length of a call
Phone settings
Summary after call - set to show a
summary after a call
Call
Control how your device handles calls
with caller ID, call waiting, speed dial,
and other call settings.
Speed dialling - set to allow speed
dialling
Anykey answer - set to answer a call
when you press any key (except
•
Send my caller ID - set to send your
caller ID based on your preferences or
network settings
[Volume],
[
], and [
]).
•
•
•
Alert during call - set to sound a tone
when you receive a message during a
call
•
•
•
•
•
Call waiting - set to alert you of an
incoming call while you are on a call
Reject call with SMS - set to send a
text message to callers you reject
Side volume key - set [Volume] to
mute the ringer or reject calls when
pressed during an incoming call
Message text - set the message to
send to rejected callers
Line in use - if your SIM card supports
two lines, set one line as the default for
outgoing calls and text messages.
Image in video call - set an image to
use during a video call
Automatic redial - set to
automatically redial an unconnected
call
90
Settings
•
•
•
•
If busy - set to divert calls when you
are on another call
Call divert
Direct incoming calls to another number.
When you divert calls, you must specify a
receiving number or delay time for
diverted calls.
If not answered - set to divert calls
you do not answer
If out of reach - set to divert calls
when you are outside the service area
Voice calls
If not available - set to divert calls
when your device is off
•
•
•
•
•
All voice calls - set to divert all voice
calls
If busy - set to divert calls when you
are on another call
Call barring
•
•
•
Outgoing calls - set to prevent all
outgoing calls
If not answered - set to divert calls
you do not answer
International calls - set to prevent
calls to international numbers
If out of reach - set to divert calls
when you are outside the service area
International calls except to home
country - set to prevent international
calls to countries other than your home
country
If not available - set to divert calls
when your device is off
Data and video calls
•
Incoming calls - set to prevent all
incoming calls
•
All data and video calls - set to
divert all data and video calls
91
Settings
•
Incoming calls when abroad - set to
prevent incoming calls when you are
outside your home service area
•
Operator Settings - check your
service provider according to the SIM
card you are using
Network
Connection settings
Control network modes and selection
methods.
Bluetooth
•
Network mode - set to operate on
UMTS or GSM networks or set to
operate on both ("dual mode")
Control the Bluetooth wireless feature.
•
Bluetooth - turn the Bluetooth feature
•
Operator selection - set the device to
automatically or manually select a list
of cellular networks
on or off
•
My phone's visibility - make your
device visible to or hidden from other
Bluetooth-enabled devices and set how
long the device is visible to other
Bluetooth-enabled devices
To receive service on another
network, you must select one that
has a roaming agreement with your
home network.
•
•
My phone's name - set a name for
your device
•
Cell info display - set to indicate
when the device is used in a Micro
Cellular Network
Remote SIM mode - activate Remote
SIM mode to make a call from a
Bluetooth hands-free car kit connected
to your device
92
Settings
•
Data bearer - set a data transmission
type
USB
Control how your device behaves when
you connect it to a computer.
If you select Packet data for the data
transmission type, edit the following
settings:
•
USB mode - set to Media player
(when synchronising with Windows
Media Player to copy media files), PC
Studio (when using PC Studio to sync
files), or Data transfer (when using a
memory card to transfer files)
•
Access point name - set the web
address for the access point
•
•
User name - set a user name
Prompt password - set to ask for a
password when you connect to the
access point
•
Ask on connection - set to ask which
mode to use when you connect to a
computer
•
•
•
Password - set a password for the
access point
Access points
Authentication - set an
authentication mode
Control access point connections,
passwords, and homepages: press
Homepage- set a homepage for
access points that connect to web
services
<Options
>
→
New access point.
•
Connection name - set a name for
the access point connection
93
Settings
If you select Wireless LAN for the data
transmission type, edit the following
settings:
You can also define advanced settings for
Access points: press <Options
Advanced settings
>
→
.
•
WLAN network name - set a name
for a WLAN network
•
•
•
Network type - set a network type
(IPv6 or IPv4)
•
WLAN network status - set to
Hidden if the WLAN network you are
connecting to is hidden or Public if it is
not hidden.
Phone IP address (IPv4 only) - set
the IP address of your device
DNS address (IPv4) - set primary and
secondary domain name server (DNS)
addresses or set to 0.0.0.0 for
automatic detection
•
•
•
•
WLAN network mode - choose a
WLAN mode
WLAN security mode - choose a
security level of a WLAN network
•
DNS address (IPv6) - set primary and
secondary domain name server (DNS)
addresses or set to Automatic (use
automatic detection) or Well-known
(use well-known IPv6 addresses)
WLAN security settings - change the
security settings
Homepage- set a homepage for
access points that connect to web
services
•
•
Proxy server address - set the IP
address of the proxy server
Proxy port number - set the port
number of the proxy server
94
Settings
•
Scan for networks - set how often
the device scans for WLANs
Packet data
Control packet data connections when
using a GPRS network.
Configurations
•
Packet data connection - set to open
a packet data connection, When
needed (if an application needs to
send packet data) or When available
(anytime a packet data connection on a
GPRS network becomes available)
View network configurations received
from your service provider. To apply the
configurations, press <Options
>
→
Save
.
•
•
Access point - set an access point
name to send packet data to a
computer (see PC Studio help)
Applications settings
High speed packet access - set the
device to use a high-speed packet
access connection
RealPlayer
Control how RealPlayer behaves when
playing videos or streaming media.
Wireless LAN
Video
•
Show WLAN availability - allow your
device to scan for available WLANs
automatically
•
Contrast - set the contrast for the
video playback
•
Loop - set to loop video playback
95
Settings
Streaming (Proxy)
Camera
•
•
Use proxy - set to use a proxy server
Control how the camera behaves when
you capture images or videos.
Proxy server address - set the
address of a proxy server
Image
•
Proxy port number - set the port
number of a proxy server
•
Image quality - set to capture High,
Normal, or Basic quality images
Streaming (Network)
•
Show captured image - set to review
a captured image before returning to
Camera mode
•
•
•
•
Default access point - set a default
access point
•
•
•
•
•
Image resolution - set a resolution
for new images
Online time - set a time to remain
online when RealPlayer is inactive
Default image name - set a default
label for new images
Lowest UDP port - set the lower end
of a range of server ports
Memory in use - set a location to
store new images
Highest UDP port - set the higher
end of a range of server ports
Light metering - set to use a Matrix
or Spot light meter
Auto Focus - set to use auto focus
96
Settings
Video
App. manager
•
•
•
•
Length - set to capture short or
maximum length videos
Control how your device behaves when
you install new applications.
Video resolution - set a resolution for
new videos
•
Software installation - set to install
only programs with signed security
certificates (Signed only) or to install
all programs
Default video name - set a default
label for new videos
•
•
Online certificate check - set to
require that applications pass a
security certificate check
Memory in use - set a location to
store new videos
Default web address - set a default
web address to use when checking
security certificates
Voice recorder
Control the quality and memory location
of voice clips.
•
Recording quality - set to record
High or MMS compatible voice clips
Log
Set how long the Log will store call and
packet data information.
•
Memory in use - set a location to
store new voice clips
97
Troubleshooting
9
If you have trouble with your device, try
these procedures before you contact a
service professional.
When you turn on your device, the
following messages may appear:
Try this to solve the
Message
problem:
Contacting a service centre
Insert SIM Ensure that the SIM card is
If you have attempted the
card
installed correctly.
troubleshooting solution and are still
having problems with your device, make
a note of the following information and
contact your local dealer or Samsung
after-sales service:
Locked
The autolock feature is
enabled. To use the device,
you must press <Unlock
and enter the code. To
>
disable the autolock feature,
• Model number(s) of your device
• Serial number(s) of your device
• A clear description of the problem
1. Press [
General
Phone and SIM card
]
→
→
Settings
→
Security
→
.
When contacting Samsung, use the
contact phone numbers, web addresses,
or postal addresses for your country of
residence.
2. Set the Phone autolock
period to None
.
98
Troubleshooting
Your device does not show a signal
(no bars next to the network icon)
Try this to solve the
problem:
Message
• If you just turned on the device, wait
about 2 minutes for your device to find
the network and receive a signal.
PIN code When using the device for
the first time or when the
PIN code request is enabled,
you must enter the PIN
• You may not be able to receive a signal
in tunnels or elevators. Move to an
open area.
supplied with the SIM card.
To disable the PIN code
request feature,
• You may be between service areas. You
should receive a signal when you enter
a service area.
1. Press [
]
→
Settings
→
General
→
Security
→
Phone and SIM card
.
You forgot a security, PIN, or PUK
code
2. Set the PIN code request
to Off
PIN code Your SIM card is blocked,
blocked. usually as a result of
Enter PUK entering your PIN
code incorrectly several times.
.
The default lock code is 00000000. If
you forget or lose this or another code,
contact the seller or your service
provider.
You must enter the PUK
supplied by your service
provider.
99
Troubleshooting
Your display shows white lines
• Re-enter and save the number, if
necessary.
The display may show white lines if you
have turned the device on after a long
period of disuse or if you removed the
battery without first turning off the
device. The display should correct itself in
a short time.
Another caller cannot hear you
speaking
• Ensure that you are not blocking the
built-in microphone.
• Move the built-in microphone closer to
your mouth.
You enter a number, but the call is
not dialled
• If using a headset, ensure that it is
properly connected.
• Ensure that you have pressed [
].
• Ensure that you have accessed the
right cellular network.
The sound quality of a call is poor
• Ensure that you have not set call
barring for the phone number.
• Ensure that you are not blocking the
internal antenna on top of the device.
• When you are in areas with weak
signals, you may lose reception. Move
to another area and try again.
You select a contact to call, but the
call is not dialled
• Ensure that the correct number is
stored in the contact information.
100
Troubleshooting
The battery does not charge properly
or sometimes your device turns itself
off while charging
Your device prompts you to delete
some data
The available memory is low. Move your
data to a memory card or delete old
items from applications.
• Disconnect the device from the
charger, remove and reinstall the
battery, and try charging again.
An application is frozen (will not
respond)
• The battery terminals may be dirty.
Wipe both gold-coloured contacts with
a clean, soft cloth and try charging the
battery again.
1. Press and hold [ ] to open the
application list.
• If the battery no longer charges
completely, dispose of the old battery
properly and replace it with a new
battery.
2. Scroll to the application that is frozen
and press [C] and then <Yes>.
3. Launch the application again.
Your device is hot to the touch
When you use several applications at
once, your device requires more power
and may heat up. This is normal and
should not affect your device’s lifespan or
performance.
101
Troubleshooting
You cannot find a Bluetooth-enabled
device
• Ensure that both devices have
activated the Bluetooth feature.
• Ensure that the distance between the
devices is not more than 10 metres
and that they are not separated by
walls or other obstacles.
• Ensure that each device's visibility is
not set to Hidden
.
• Ensure that both devices are
compatible with Bluetooth wireless
technology.
102
Index
contacts
assigning default numbers or
files and folders
Flash Player see media
converter
Gallery see media
GPS
device manager
104
Index
media
notes
PC Studio
memory cards
PDF see Adobe Reader
Quickoffice
music player
RealPlayer see media
recorder see media
105
Declaration of Conformity (R&TTE)
Samsung Electronics
We,
declare under our sole responsibility that the product
ڈ GSM Mobile Phone : SGH i550W
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
ڈ SAFETY
EN 60950
1
:
2001+A11:2004
ڈ EN 301 489 01 V1.5.1 (11 2004)
ڈ EN 301 489- 01 V1.6.1 (09-2005)
ڈ ڈ EN 301 489 07 V1.2.1 (08 2002)
EMC
ڈ EN 301 489 17 V1.2.1 (08 2002)
ڈ ڈ EN 301 489 24 V1.2.1 (11 2002)
ڈ EN 50360
:
2001
2006
SAR
EN 62209-1
:
ڈ EN 301 511 V9.0.2 (03 2003)
ڈ EN 300 328 V1.6.1 (11 2004)
RADIO
ڈ ڈ ڈ V3.2.1 (05 2007)
EN 301 908
EN 301 908
1
2
ڈ V3.2.1 (02 2007)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
ญ
The conformity assessment procedure referred to in Article 10 and detailed in Annex[
]
of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
ଖ
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 0168
The technical documentation kept at
:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
GU46 6GG, UKଖ
Yateley, Hampshire,
2007.11.14
Yong-Sang Park
/
S. Manager
(place and date of issue)
(name and signature of authorised person)
ଖ
It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country, some of the
descriptions in the guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this guide.
Printed in Korea
Code No.:GH68-17245A
English. 03/2008. Rev. 1.2
World Wide Web
http://www.samsungmobile.com
|