Samsung Messager™
( S C H - r 4 5 0
P O R T A B L E
M O B I L E
S e r i e s )
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents:
U.S. Patent No. 4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
VoiceSignal and the VoiceSignal logo are registered Trademarks of VoiceSignal Technologies, Inc.
®
Openwave is a registered Trademark of Openwave, Inc.
®
The Bluetooth word mark, figure mark (stylized "B Design"), and combination mark (Bluetooth word mark and "B Design") are registered
trademarks and are wholly owned by the Bluetooth SIG.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
2
3
Section 1: Getting Started
This section explains how to start using your SCH-r450 phone by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 141.
OK
highlight UsetheNavigationkey(
)tomoveahighlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 118.
OK
press the OK key
to launch, access, or save a
highlighted menu item or screen field of interest.
➔
Used in place of “select” in long “drill down”
procedure steps.
Notes and Tips
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
Installing the Battery
•
•
•
Notes: Explain alternative options within the current feature, menu, or
sub-menu.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
Getting Started
4
1. Insert the top end of the
battery first, matching the
gold contacts on the inside
of the battery to those on the
phone.
2. Press down on the battery
cover release latch (1) and lift
the cover (2) up at the top
and away from the phone.
2. Press lightly on the bottom end of the battery down into
the phone until it slips into place.
3. Lift the battery (3) up and
away from the phone,
bottom end first.
3. Press lightly down and
4
3
inward on the bottom of the
battery cover.
Charging the Battery
4. Press lightly on the top end
3
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
of the battery cover, down
over the battery, until it
clicks into place.
Remove the Battery
1. Press and hold the
key to turn off the phone (if on).
5
Use the Travel Adapter
Low battery indicator
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
) in the upper-right corner of the
•
•
•
Three bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
) and a tone sounding indicate you
1. Plug the large end of the Travel Adapter into a standard
have two to three minutes before the battery is too low to operate the
phone.
120 VAC or 220 VAC wall outlet.
If you continue to use your phone without charging its battery, the
phone will shut down.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
2. Insert the smaller end of
the Travel Adapter into the
Turning Your Phone On
charger/accessory
+
1. With the phone closed, press and hold the
key until
Incorrect
connector at the bottom
the display lights.
end of your phone.
Note: As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
2. The phone begins searching for a network signal.
Getting Started
6
3. Once the phone finds a signal, the time, date, and day
2. Follow the prompts in the new user tutorial to setup your
appear near the top of the display.
mail box.
4. You’re now ready to place and receive calls.
Listen to Voicemail
1. In standby mode, press and hold the
key or dial your
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
own mobile number to dial Voicemail. After connecting,
you will hear your voice greeting.
cannot place or receive calls, try later when service is available, or at
another location.
2. You are prompted to enter your password.
Turn Your Phone Off
Memory Card (Optional)
ᮣ
With the phone closed, press and hold the
two or more seconds. Your phone powers off.
key for
Your phone has a Memory Card slot on its right side, behind the
battery cover. You can install a microSD™ card to provide
additional memory for storing files (such as, sound files and
photos) in your phone.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Install a Memory Card
Setting Up Your Voicemail
1. Open the battery cover from the back of your phone. (For
more information, refer to Step 2 of “Remove the Battery”
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, press and hold the
key or dial your
own mobile number to dial Voicemail.
7
2. Insert the memory card — label side facing up and smaller
end pointing toward the phone — into the memory card
slot.
2. Press the memory card into the slot until the card lock
releases.
3. Remove the memory card from the memory card slot.
5. Replace the battery cover.
3. Press the memory card into the slot until the card locks
into place.
4. Replace the battery cover.
Remove a Memory Card
1. Open the battery cover from the back of your phone. (For
more information, refer to Step 2 of “Remove the Battery”
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Closed View of Your Phone
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
•
•
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning (GPS) Technology
PIM Functions
Picture (MMS) Messaging
Text (SMS) Messaging
E-mail Messaging
QWERTY Keypad
Built-in 1.3 Megapixel Digital Camera
Voice Dial
Features
1. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Speakerphone
Note: The SCH-r450 supports the wireless handsfree profile and OBEX
profiles for Bluetooth® wireless technology. The SCH-r450 does not
support the Bluetooth serial port profile.
9
2. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
10. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
11. Special Function Keys — Enter special characters.
3. Speakerphone Key — Lets you enable/disable
Performs various functions.
speakerphone mode.
12. Microphone — Lets the other party to a call hear you
4. SEND Key — Lets you place or receive a call. In standby
clearly when you are speaking to them.
mode, press the key once to access the recent call log.
13. Power/Accessory Connector — Used to plug in charging
accessories and to connect a headset or any available
accessory cables to your phone.
5. Alpha-numeric Keys — Use these keys to enter
numbers, letters, and characters.
6. Earpiece / Speaker — Lets you hear ringing and alert
14. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
tones, alarm tones, and the other parties to calls.
7. Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators, signal strength, and so on.
15. CLR Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
8. OK Key — In standby mode, launces the Main Menu.
Pressing when navigating through a menu accepts the
highlighted choice in a menu.
16. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
9. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions.
Understanding Your Phone
10
17. Camera / Music Player Key — Launches the Camera or
Features
the Music Player feature of your phone.
1. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
18. Voice Recognition Key — In standby mode, pressing and
holding this key launches VoiceSignal options.
2. Display — Indicates the status of your phone, including
numbers dialed, feature and function screens, status
icons, message indicators, signal strength, and so on.
Open View (Front) of Your Phone
3. soft1 Key — Left soft key — Used to navigate through
menus and applications and to select the choice indicated
at the bottom left corner of the Main LCD.
4. shift Key — Toggles ABC mode capitalization between
ABC, Abc, and abc.
5. Messaging Key — Launches the Messages menu.
6. Fn Key — Text Function Key — Toggles text entry mode
between ABC and 123 modes.
7. space Key — Inserts a space character in a text entry.
8. Arrow (Navigation) Keys — In Menu mode, lets you
scroll through the phone menu options. In Standby mode,
lets you access preset functions and one user-defined
function.
11
9. soft2 Key — Right soft key — Used to navigate through
menus and applications and to select the choice indicated
at the bottom right corner of the Main Display.
Closed Rear View of Your Phone
10. OK Key — In standby mode, launces the Main Menu.
When navigating through a menu accepts the highlighted
choice in a menu.
11. Back / Clear Key — Deletes characters from the display
when you are in text entry mode. Press this key to return to
the previous menu or screen when navigating features on
your phone.
12. Speakerphone Key — Lets you enable/disable
speakerphone mode.
13. SEND Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent call log.
14. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
1. Headset Connector — Used to connect a headset or TTY
2. Speaker Grill — Lets you hear ringing and alert tones,
alarm tones, and the other parties to calls.
Understanding Your Phone
12
3. Camera Lens — The lens of your built-in camera.
•
When the Left soft key function is Edit, press the Edit (left) soft key
or ) to edit a Contact.
(
4. Mirror — Lets you position the Camera Lens to take self
Right Soft Key
portraits.
Some functions of the Right soft key are as follows.
5. Camera / Music Player Key — Launches the Camera or
•
•
•
In standby mode, press the @metro (Right) soft key (
launch the @metro screen.
When the Right soft key function is Options, press the Options (right)
soft key ( or ) and a pop-up menu appears.
When the Right soft key function is Back, press the Back (right) soft
or
) to
the Music Player feature of your phone.
6. Battery Cover — Lets you access your phone’s battery.
7. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
key (
or
) to back up one menu level.
OK Key
8. Battery Cover Release Latch — Lets you remove the battery
OK
•
•
•
•
In standby mode, press the OK key ( or
Menu.
) to launch the Main
cover.
OK
In a menu, press the OK key ( or
selection.
) to accept the highlighted
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, the Left soft key
OK
In camera mode, press the Take key ( or
create a Picture message.
) to take a photo or to
(
or
) and the Right soft key (
or
).
OK
When the OK key function is Edit, press the Edit key ( or
) to
Left Soft Key
edit a Draft message.
Some functions of the Left soft key are as follows:
•
In standby mode, press the Contacts (left) soft key (
or
) to
show the Contacts Find screen.
13
Speakerphone Key
•
•
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
to make a call.
The Speakerphone key ( ) is used to place your phone in
Speakerphone mode, allowing you to use your phone handsfree
and/or to share a call with others, such as in an office or
conference room
•
•
Press
Press
twice in standby mode to call the most recent number.
to pick up a waiting call. Press
again to switch back
to the other call.
Clear Key
Navigation Key
The
numbers, text, or symbols from the display. You can also use the
or key to return to a previous menu.
C/Back Arrow key ( or
) is used to erase or clear
OK
Use the directional keys on the Navigation key
to browse
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications. (For more information, refer to
•
If you enter an incorrect character, briefly press
backspace (and delete) the character.
or
to
•
•
To erase the entire sentence, press and hold
or
.
Camera / Music Player Key
To back up one menu level, briefly press
or
.
Use the Camera/Music Player key (
) on the right side of
End Key
the phone to activate the camera built into your phone and to
take pictures, and to activate the Music Player built into your
phone to play music files loaded onto an optional microSD™
Memory Card.
•
•
•
Press and hold the End key
to turn on your phone.
once to disconnect a call.
to return to standby mode from any menu, or to cancel the
Briefly press
Press
last input.
Send Key
The Send key
recall the last number(s) dialed, received, or missed.
Press once to answer calls.
is used to answer calls, dial calls, and to
•
Understanding Your Phone
14
With the QWERTY
keypad open, the
display rotates
automatically
from portrait
mode (as shown
above) to
Understanding the Display Screen
1
2
1. The top line of your
phone’s display contains
icons that indicate
network status, battery
power, signal strength,
connection type, and
more.
1
2
landscape mode
(as shown here).
3
3
2. The center portion of the
Display Screen Icons
display shows
Your SCH-r450 phone can show you definitions of the icons that
appear on the top line of the display.
information such as call progress information, messages,
and photos.
To access the Icon Glossary:
3. The bottom line of the display shows current soft key
OK
ᮣ
In standby mode, press the Menu key ( ), then press
functions. The sample screen shows that pressing the Left
(for Settings),
(for Phone Info), and
soft key (
or
) will display the Contacts Find screen
for Icon Glossary. A list appears showing all of
and pressing the Right soft key (
or
) will launch
the icons that can appear on the top line of the display.
@metro.
Dialogue Boxes
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
15
•
•
•
•
•
•
•
Choice
•
Reconfirm
Your Phone’s Modes
Call Answer Mode
Example: “Save Message?”
You can choose to answer a call by pressing any key except the
•
Example: “Erase All Messages?”
key or
key, by pressing only the
key, or by
Performing
•
Example: “Sending...” “Connecting...”
Completed
Input mode
•
Example: “Message Saved”
Information
•
Error
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key
Example: “New Message”
(
or
), then choose the input mode from the pop-up
menu using the Navigation key. Optional input modes are T9
•
Example: “System Error!”
Warning
Example: “Low Battery,” “Memory Full!”
•
Backlights
Note: With the QWERTY keypad open, T9 Word and Symbol input modes are
not available. Use 123 mode instead of Symbol to enter symbols and
punctuation in your text.
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
Tip: With the phone closed, you can also cycle between T9 Word, Abc, and
123 by pressing and holding the
each cycle.
key until the phone beeps, for
Note: During a phone call, the display backlight dims after 10 seconds and
turns off after 30 seconds to conserve battery power, regardless of the
Backlight setting.
Understanding Your Phone
16
Receive Messages in Standby Mode
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
volume key. Unlock your phone by entering the lock code when
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
•
View Now — This selection allows you to view the messages
now.
•
View Later — This selection allows you to view the messages at a
later date.
OK
ᮣ
Highlight the desired viewing option and then press
.
Standby Mode
Talk Mode
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
You can place and receive calls only when your phone is on.
While in a call your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
•
•
After you power the phone on.
When you press after a call or from within a menu.
In standby mode, you will see the time, day, and date as well as
all phone status icons.
Speakerphone Mode
Place Calls in Standby Mode
Lets you use your phone handsfree or to share a call with other
people nearby.
1. While in standby mode, enter a phone number, and press
to place a call.
•
To place your phone in Speakerphone Mode:
ᮣ
Press and hold the Speakerphone key ( ) until
2. Press
to return to standby mode.
“Speakerphone On” appears in the display.
17
Adjust the Ringer
•
To disable Speakerphone Mode:
ᮣ
Press and hold
the display.
until “Speakerphone Off” appears in
1. In standby mode, press the volume key (
right side of the phone up or down. Options are:
) on the
•
•
•
•
Ringer Off
Vibrate
Low
•
•
•
•
Medium
Medium/High
High
Note: Your phone automatically enters Speakerphone Mode when you dial a
call using the QWERTY keypad and the called phone begins ringing.
Low/Medium
Vibrate/High
Enter/Exit Silent Mode
OK
2. When you are satisfied with the setting, press
or
.
Silence the tones your keypad makes when you press a key.
Your phone returns to standby mode.
•
To enter Silent Mode:
In standby mode, press and hold
ᮣ
. “Entering Silent
Tip: You can also enter the Volume > Voice Calls sub-menu by pressing the
OK
Menu key ( ), then pressing the
,
,
, and
Mode” briefly appears in the display and your phone
keys. Use the Volume key on the right side of your phone to adjust the
ringer volume setting.
returns to standby mode.
•
To exit Silent Mode:
While in Silent mode and standby mode, press and hold
Note: The Vibrate icon ( ) appears in the display when the phone is in
ᮣ
Vibrate mode. The Vibrate/Ring icon (
) appears in the display
when the phone is in Vibrate/High mode.
. “Exit Silent Mode” briefly appears in the display
and your phone returns to standby mode.
Vibrate Mode
ᮣ
In standby mode, repeatedly press the volume key
) down until Vibrate appears in the display.
The volume key is on the upper right side of phone.
(
Understanding Your Phone
18
Camera Mode
Camera mode lets you activate your phone’s camera to take
pictures. In Camera mode, you can also adjust the resolution and
appearance of your pictures.
•
Entering Camera Mode — In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
Exiting Camera Mode — Press the key.
•
Music Player Mode
Music Player mode lets you activate you phone’s Music Player to
play music files loaded onto an optional microSD™ Memory
Card.
•
•
Entering Music Player Mode — In standby mode, press the Camera
key ( ) — on the right side of the phone.
Exiting Music Player Mode — Press the key.
19
Section 3: Call Functions
This section provides procedures for making and answering
calls. This section also describes features, such as call logs and
call timers, that help you make calls and manage your call time.
1. With the phone on, enter the Emergency Number you wish
to call using the keypad.
Note: You can define up to 3 emergency numbers in your phone. (For more
Note: The procedures in this section can be performed using the phone
keypad or the QWERTY keypad.
2. Press
to place the call.
Tip: When using the QUERTY keypad, it is recommended that you also use an
optional headset or an optional handsfree car kit or that you place your
Tip: If you need to make an emergency (911) call with Airplane mode
enabled, just dial the emergency number and press
. (For more
Three-way Calling
Making a Call
1. With the phone on, enter the number you wish to call using
Call two other numbers and connect them to your call using
three-way calling.
the keypad.
1. In standby mode, enter the number for the first party in
2. Press
to place the call.
your call, then press
2. When connected, ask the other party to remain on the line.
Press to place them on hold.
3. Enter the second party’s phone number and press
.
Emergency Calls
When you call an Emergency Number, such as 911, your SCH-
r450 phone locks itself in emergency mode, only allowing you to
make calls to the emergency call center you originally contacted.
This enables emergency operators to more easily dispatch aid,
such as police, fire fighting, and emergency medical personnel.
.
4. When the second party answers, press
to connect all
three parties.
Call Functions 20
Manual Pause Calling
ᮣ
In standby mode, press and hold the number key
corresponding to the desired Contact’s speed dial number.
To manually call a number with pause(s) without storing it in your
Contacts list:
Example: To speed dial the Contact assigned speed dial 5, press and hold
1. In standby mode, enter the number you wish to call.
or
.
2. Press the Options soft key. The following pause options
2-Touch Dialing
appear in the display:
Use 2-touch dialing to speed dial Contacts from 10 through 99.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
•
•
2-Sec Pause — A 2-second pause after which dialing resumes.
Wait — A hard pause (waits for input from you).
3. Highlight the desired pause.
OK
4. Press the
key or
key to enter the highlighted pause
2. Press and hold the number key representing the second
into the number sequence.
digit of the desired Contact’s speed dial number.
5. Press
to call the number.
Example: To speed dial the Contact assigned speed dial 35, press
then press and hold or
or
.
Tip: Press the Save soft key to store pauses along with the number if you
plan to call the number frequently.
3-Touch Dialing
Speed Dialing
Use 3-touch dialing to speed dial Contacts from 100 through 999.
1. In standby mode, press and release the number key
representing the first digit of the desired Contact’s speed
dial number.
Speed Dialing lets you place a call to any Contact stored in your
Contacts list by dialing the Contact’s Location number.
1-Touch Dialing
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)
through 9.
21
Voice Dialing Tips:
2. Press the number key representing the second digit of the
•
•
Wait for the beep before speaking.
desired Contact’s speed dial number.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
3. Press and hold the number key representing the third digit
of the desired Contact’s speed dial number.
•
When saying a name, say the first name then the last name.
Dialing a Name
Example: To speed dial the Contacts entry assigned to speed dial 325, press
or
, press
or
, then press and hold
or
To dial a name, do the following:
.
1. In standby mode, press and hold
or
.
Voice Dialing
“Say a Command” appears in the display and is
The voice recognition capabilities of your SCH-r450 are
pronounced through the earpiece.
exceptional due to advanced, speaker-independent technology.
This means you do not need to “train” your phone to understand
your voice. You can use your voice in a natural manner to dial
numbers.
2. Say, “Call”.
You are prompted to “Say the name or number”.
3. Speak clearly and say the name of a person in your
Contacts list, first name followed by last name.
Note: End Calls Before relaunching the VoiceSignal voice recognition
software — When you use Voice Dialing to make a call, you must end
that call before you can use other Voice Commands. See “Voice SVC”
on page 70 for more information.
If the name is recognized, Voice Dial repeats the name and
dials the number.
Use the Call command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Call to dial any telephone number, even
numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
Call Functions
22
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
information.)
2. Say “Call”.
VoiceSignal prompts you to “Say the name or number.”
3. Speak clearly and say the telephone number of the person
you want to call.
•
•
Press the Repeat soft key to say the name again.
Press to exit VoiceSignal without dialing.
For example, say “7 8 1 9 7 0 5 2 0 0."
If it recognizes the number, Voice Dial repeats it and dials
the number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
If the recognized name has multiple numbers stored for it
(that is, Mobile, Work, Home, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
5. Say one of the following number types:
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
information.)
•
•
•
“
Home
Work
Mobile
”
“
”
“
”
Voice Dial dials the specified number.
•
•
Press the Repeat soft key to say the name again.
Press to exit VoiceSignal without dialing.
Dialing a Number
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold or
Pause Dialing From a Contacts Entry
.
•
If you voice dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
“Say a Command” appears in the display and is
pronounced through the speaker.
23
•
If you voice dial a contact that contains Wait(s), wait for the appropriate
prompt(s) from the number you are calling (credit card number, bank
account number, and so on) and enter the appropriate response(s).
•
•
Different ring types or melodies to distinguish callers.
Name display with caller ID. (If the caller’s name is programmed into
your Contacts).
•
Information about the last 90 each of incoming, missed, and outgoing
calls are automatically stored to a call log.
Answering a Call
Incoming
Set Call Ringer Volume
When you receive a call, the phone displays one of the following:
1. In standby mode, press the Volume key on the right side of
•
If the caller can be identified, the caller’s number (or name if it’s in your
Contacts) appears in the display.
the phone.
•
If the caller cannot be identified, Call from unavailable # Call from
restricted #, or no number appears in the display.
,
2. Press the Volume key up or down to set the call ringer
volume as desired.
Adjust the Ringer
Tip: Assign pictures to Contacts entries. The entry’s assigned picture
appears in the display when you receive a call from that entry. (See
1. In standby mode, press the Volume key (
) on the
right side of the phone up or down. Options are:
The phone continues to notify you of the call until one of the
following events occur:
• Ringer Off
• Vibrate
• Low
• Medium
• Medium/High
• High
•
•
•
You answer the call.
• Low/Medium
• Vibrate/High
The calling party ends the call.
The call is sent to voicemail.
OK
2. Once you’re satisfied with the setting, press
or
.
Call Notification Features
The phone returns to standby mode.
Your phone notifies you of a call in a variety of ways.
•
Eight ring volume settings: Ringer Off
,
Vibrate, Low, Low/Medium,
Medium Medium/High High, or Vibrate/High.
,
,
Call Functions
24
Tip: You can also enter the Volume > Voice Calls sub-menu from standby
Note: Contact your Wireless Carrier for availability.
OK
mode by pressing
Volume
phone to adjust the ringer volume setting.
or
, then selecting Settings
➔
Sound Settings
➔
➔
Voice Calls. Use the Volume key on the right side of your
1. Press
to place the first call on hold, answer the
second call, and ask the caller to remain on the line.
Note: The Vibrate icon (
) appears in the display when the call ringer is
2. Press
the first call.
3. Press
to place the second call on hold and return to
set to Vibrate. The Vibrate/Ring icon (
) appears in the display
when the call ringer is set to Vibrate/High.
to alternate between calls.
Call Answer
Caller ID
Select from two methods for answering calls. This option can be
Caller ID lets you identify who is calling you by displaying a
caller’s number. If the caller’s name and number are stored in
Contacts, the caller’s name also appears. If you’ve assigned a
picture to the entry, it appears in the display as well.
changed in the Settings menu.
OK
1. In standby mode, press
or
, then select Settings ➔
Call Settings ➔ Call Answer.
The following options appear in the display:
Call Block
•
Any Key — Pressing any key except
,
, or
You can prevent your number from displaying on another phone’s
caller ID screen by enabling Call Block.
answers a call.
•
Send Key — Only pressing
answers a call.
1. In standby mode, press
,
,
(or
,
,
2. Select Call Answer option of your choice.
).
Call Waiting
2. Enter the number you wish to call, then press
.
If you’re on a call, your phone beeps when you receive a second
call. Call Waiting lets you answer the second call and alternate
between both calls.
25
Silence an Incoming Ring
•
•
Voice Privacy — When set to Enhanced, the phone sounds an
audible beep when you loose privacy (encryption) on a CDMA
connection. For this option to work correctly, you must have the
Enhanced privacy option enabled in the Security settings. (This
option is enabled by default.)
To temporarily silence the incoming call ringer:
ᮣ
While your phone is ringing, press the Volume key
), on the left side of the phone, up or down.
(
Location — Turn your GPS location on or set GPS location for
emergency calls only.
Ignore an Incoming Call
Ignored calls are immediately forwarded to Voicemail.
To ignore an incoming call:
2. With the above menu displayed, do one of the following:
•
Select a menu or feature to access the menu or activate the
highlighted feature.
ᮣ
While your phone is ringing, press the Ignore soft key. The
•
Press the Cancel soft key to exit the menu.
incoming call is forwarded to Voicemail.
Calls
In-Use Menu
Your phone has Call Logs that retain information about Outgoing,
Incoming, and Missed Calls. The Calls menu lets you access this
information for future reference, to return calls, and to add new
Contacts. You can also view times for your last call and the total
of all calls.
You can access a number of menus and features even while in a
call.
1. While in a call, press the Options soft key. The following
options pop-up in the display:
•
•
•
•
Message — Display the Messages menu.
Contacts — Display the Contacts menu.
Recent Calls — View your recent calls log.
Tip: To quickly view a list of your most recent calls (outgoing, incoming, and
missed), briefly press
while in standby mode. The All Calls
screen, listing up to 270 of your most recent calls, appears in the
display.
Send DTMF — Send your phone number as DTMF tones to the
other person on the call.
Call Functions
26
–
View Timer
—
Call Timer screen appears in the display listing the
Outgoing Calls
on page 29 for more information.)
The last 90 outgoing calls are stored in the Outgoing calls log.
Review the Outgoing calls log for the time and date of a call, as
well as other information.
Select an option to perform its function.
Incoming Calls
OK
1. In standby mode, press
or
, then select Calls ➔
The last 90 Incoming calls are stored in your phone’s Incoming
calls log. You can review the Incoming calls log for time and date
of each call, as well as other information.
Outgoing Calls. A list of your outgoing calls appears in the
display.
2. Highlight a call. You have the following options:
OK
1. In standby mode, press
or
, then select Calls ➔
•
To compose and send a message to the caller, press the Msg soft
Incoming Calls. A list of your Incoming calls appears in
the display.
2. Highlight a call. You have the following options:
•
To compose and send a message to the caller, press the Msg soft
page 56.)
OK
•
•
To view further information about the call, press OPEN
(
or
).
To access further options, press the Options soft key. The following
options appear in the display:
OK
•
•
To view further information about the call, press OPEN
(
or
–
–
Save — Save the number to your Contacts.
).
Details — Contacts calls only — Lets you view the Contacts entry for
the recipient of this call.
To access further options, press the Options soft key. The following
options appear in the display:
–
–
Erase — Erase the selected call from your Outgoing calls list.
–
–
Save — Save the number to your Contacts.
Lock/Unlock — Blocks/permits erasure of the selected call from your
Outgoing call list.
Details — Contacts calls only — Lets you view the Contacts entry for
the originator of this call.
–
Erase all — Erase all unlocked calls from your Outgoing call list.
27
–
–
Erase — Erase the selected call from your Incoming calls list.
Lock Unlock — Blocks/permits erasure of the selected call from your
•
To access further options, press the Options soft key. The following
options appear in the display:
/
Incoming calls list.
–
–
Save — Save the number to your Contacts.
–
–
Erase all — Erase all unlocked calls from your Incoming calls list.
Details — Contacts calls only — Lets you view the Contacts entry for
the originator of this call.
View Timer
—
Call Timer screen appears in the display listing the
on page 29 for more information.)
–
–
Erase — Erase the selected call from your Missed calls list.
Lock/Unlock — Blocks/permits erasure of the selected call from your
Select an option to perform its function.
Missed Calls
Missed calls list.
–
–
Erase all — Erase all unlocked calls from your Missed calls list.
View Timer
—
Call Timer screen appears in the display listing the
The last 90 missed calls (calls you did not answer) are stored in
the Missed calls log. Review the Missed calsl log for the time and
date of the call, as well as other information.
on page 29 for more information.)
Select an option to perform its function.
OK
1. In standby mode, press
or
, then select Calls ➔
Erase Logs
Missed Calls. A list of your missed calls appears in the
You can erase Outgoing, Incoming, Missed, or All Calls.
display.
Erase All Calls
2. Highlight a call. You have the following options:
OK
1. In standby mode, press
or
, then select Calls ➔ All
•
To compose and send a message to the caller, press the Msg soft
Calls. The All Calls list appears in the display with the first
call in the list highlighted.
2. Press the Options soft key, then select Erase all. “Erase
all entries?” prompts you to confirm erasure of all Calls
log entries.
OK
•
To view further information about the call, press OPEN
(
or
).
Call Functions
28
3. To Erase all calls, press the Yes soft key. To keep the calls,
3. Press the Reset soft key to reset the highlighted timer.
press the No soft key.
Press the Reset All soft key to reset all of the timers
except Lifetime Calls.
Call Timer
OK
4. Press
to exit the Call Timer screen.
View the duration of your last call, total calls, and calls made
during the life of your phone using the Call timer feature. Call
timer is not for billing purposes.
Note: Although Total call timers can be erased, LifeTime call timers can
never be erased.
OK
1. In standby mode, press
or
, then select Calls ➔
Data Counter
Call Timer. The following options appear in the display:
Use Data Counter to view the amount of data that has been sent
or received (or a total of both) using the data services that your
phone supports. The Data Counter can be a helpful tool for
monitoring data usage, especially if your service agreement has
specified limits.
•
•
Last Call — Shows the duration of your last call.
Outgoing Calls — Shows the number and total duration of all
calls originated by your phone since the last reset.
•
•
Incoming Calls — Shows the number and total duration of all
calls made to your phone since the last reset.
OK
1. In standby mode, press , then select Calls ➔ Data
Roaming Calls — Shows the number and total duration of all
calls originated by and made to your phone while roaming and
since the last reset.
Counter. The following options appear in the display:
•
•
•
Transmit KB — Shows the amount of data (in kilobytes) that your
•
•
•
All Calls — Shows the number and total duration of all calls
originated by and made to your phone since the last erasure.
phone has transmitted since last being reset.
Received KB — Shows the amount of data (in kilobytes) that your
phone has received since last being reset.
Last Reset — Shows the date and time all counters, except
Lifetime Calls, were reset.
Total — Shows the amount of data (in kilobytes) that your phone
has transmitted and received since last being reset.
Lifetime Calls — Shows the duration of all calls on your phone
since activation (Lifetime timers cannot be reset).
• Last Reset — Shows date and time the Data Counters (except
Lifetime Data Counter) were last reset.
2. If desired, highlight a particular timer.
29
•
Lifetime Data Counter — Shows the amount of data (in
kilobytes) that your phone has transmitted and received since being
activated.
•
•
for Missed Calls
for All Calls
3. Use the Up and Down navigation keys to highlight the
2. To reset a timer other than Lifetime Data Counter, highlight
OK
number you wish to store in Contacts and press
.
the timer you want to reset and press the Reset soft key.
4. Press the Options soft key, then use the Up and Down
3. To reset all timers except Lifetime Data Counter, press the
navigation keys to highlight Save.
Reset All soft key.
5. Select Create New to add the number as a Contacts entry,
or select Update Existing to find a Contact with which to
associate the new number.
OK
4. Press
to exit the Data Counter screen.
Note: Although other data counters can be reset, only the Lifetime Data
Counter can never be reset.
6. Follow the prompts to store the number to Contacts.
Store Numbers from Call Logs
Store numbers from your Outgoing, Incoming, Missed, and All
calls logs to Contacts.
Tip: In standby mode, briefly press
to display the Recent Calls list. You
can then select any call in the list to save to Contacts.
OK
1. In standby mode, press
or
, then select Calls.
2. Press the corresponding number on the keypad to view
call logs for the following call types:
•
•
for Outgoing Calls
for Incoming Calls
Call Functions
30
Section 4: Menu Navigation
This section explains the menu navigation for your phone.
Menu Shortcuts
Menu Navigation
Access the menus and sub-menus in your phone using the
Use shortcuts to quickly access menus and sub-menus. Press
OK
or
, then press the number to the left of the menu label to
jump to the desired menu, sub-menu, or feature.
OK
navigaTion key (
and soft keys (
) , the arrow keys (
,
,
,
),
or ), or use a shortcut.
OK
Example: To jump to the Outbox sub-menu, press
or (for Messages) and
or
, then press
for Outbox.
OK
1. In standby mode press
or
. The first of several
or
menus appear in the display.
Navigation Key Shortcuts
QWERTY Keypad Closed
Note: More than one menu may appear in your display. This setting can be
In standby mode and with the QWERTY keypad closed, press a
navigation key to launch the key’s corresponding application in
the pattern shown here.
2. Use the Navigation key to browse through the menus.
OK
3. Press
or
to enter the menu or sub-menu that
Contacts (Find)
appears in the display.
4. Press the Back soft key or press or
to return to
to return
OK
MetroWEB
@metro
the previous menu.
Return to the Previous Menu
Press the Back soft key to return to a previous menu.
When Back does not appear in the display, press
Messages
•
•
or
to the previous menu.
31
OK
QWERTY Keypad Open
1. In standby mode, press
or
.
2. Press the number of the menu, sub-menu, and so on
In standby mode and with the QWERTY keypad open, the
navigation key application pattern rotates 90° as shown here.
for the feature that you wish to access.
Contacts (Find)
OK
Example: Press
or
, then press
or
, and
or
.
This takes you to the Tools (Menu 8), and then to the Calendar
(sub-menu 2).
MetroWEB
@metro
Messages
QWERTY Keypad Shortcuts
In standby mode and with the QWERTY keypad open, you have
the option of using the arrow keys on the QWERTY keypad itself
to launch applications, as shown here.
Contacts (Find)
MetroWEB
@metro
Messages
Navigate Using a Shortcut
You can also access menus and sub-menus using menu
OK
numbers. Enter the menu number after pressing
or
to go
directly to the menu or sub-menu of your choice. Before you can
navigate using a shortcut, you’ll need the menu or sub-menu
number that you wish to access.
Menu Navigation
32
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad or the nested,
QWERTY keyboard-style keypad. This section also describes how
to use the T9 predictive text entry system to reduce the number
of key strokes needed to enter text.
Your r450 has a built-in, keyboard-style keypad, commonly
called QWERTY, that you can access by sliding it open from
beneath the top section of the phone. This also automatically
rotates the image in the display to show information in a wider,
landscape format. Using the QWERTY keypad, you can type
letters, numbers, punctuation, and other special characters into
text entry fields or other applications simpler and faster than
using the telephone keypad.
Built-in QWERTY Keypad
Display
Note: Two of your phone’s functions (@metro and MetroWEB) call for you to
use the QWERTY keypad. Other functions requiring text entry (such as,
Messaging and Memo Pad) accept text entry from whichever keypad
you prefer.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
Clear
Key
•
T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
–
–
–
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
T9 word — Enter all lower case letters
Left Soft
Key
Fn (Input
Mode) Key
Navigation
Keys
Right
Soft Key
33
The following options appear in the display:
Note: T9 Word does not support the QWERTY keypad, which does not need
this function.
•
•
•
•
•
T9Word
Abc
•
Abc — Enter letters, numbers, and symbols by using the QWERTY
keypad or by repeatedly pressing each phone key until the desired
character (as shown on the key) appears in the display. ABC mode
letter options are:
ABC
123
Symbols
–
–
–
Abc — Enter initial capital letters
ABC — Enter all upper case letters
abc — Enter all lower case letters
• Add T9 Word
2. Select the desired text entry mode.
®
Using T9 Mode (Phone Keypad Only)
•
123 — Enter numbers by pressing the corresponding keys on the
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
phone keypad or the QWERTY keypad.
Tip: Using the QWERTY keypad, also use 123 mode to enter symbols into
your message simply by pressing the keys labeled with the symbols you
want.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
1. While composing a text message, press the Left soft key,
then select T9Word.
•
For practice, enter the word “Samsung” by pressing each of the
following keys only once:
The current text entry mode (T9 Word, Abc, ABC, 123, or
Symbols) is indicated in the lower part of a text entry screen. To
change the text entry mode, do the following:
1. While composing a text message, press the Left soft key.
S
A
M
S
U
N
G
Entering Text
34
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”
If more than one word shares the same numeric sequence, T9 Word
provides the most commonly used word, any additional words appear in
a pop-up window, in which you can select a desired word.
Using Abc Mode
1. While composing a text message, do one of the following:
•
Using the QWERTY keypad, press
lower left corner of the display.
until “Abc” appears in the
•
Using the phone keypad, press the Left soft key, then select Abc
.
Note: To enter a space, press
. To enter a period, press
. These
2. Enter characters while in Abc mode by using one of
key functions apply to both T9 Word and Abc modes. For other
following keypads:
•
Using the QWERTY keypad, press the key labeled with the desired
Adding Words to the T9 Word Dictionary
character (such as, press
for “G” and
for “H”).
If pressing the keys corresponding to a word you want to enter
and then scrolling through the pop-up list does not display that
word, do the following:
•
Using the phone keypad:
–
–
–
Press the key repeatedly until the desired character appears in the
display (such as, press once for “G” and twice for “H”).
1. Clear the word by pressing and holding
.
Pause briefly and the displayed character is accepted and inserted into
your message.
2. Change the text entry mode to Add T9 Word
.
Press
to enter a space and press
to enter a period.
changing the text entry mode to Add T9 Word
Entering Numbers
.
Enter numbers into a text message while in 123 mode.
3. Enter the word you want to add to the T9 Word dictionary.
1. While composing a text message, do one of the following:
•
Using the QWERTY keypad, press
lower left corner of the display.
until “123” appears in the
Note: In Add T9 Word mode, you enter a word using the same multiple
keypress method as when in Abc text entry mode.
•
Using the phone keypad, press the Left soft key, then select 123
.
OK
4. Press . The word is added to the T9 dictionary.
35
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
ᮣ
While composing a text message, enter symbols by using
one of following keypads:
•
Using the QWERTY keypad:
–
–
Press
until “123” appears in the lower left corner of the display.
Press the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
•
Using the phone keypad:
–
–
–
–
Press the Left soft key, then select Symbols. The first of three symbol
screens appears in the display.
Use the Left and Right soft keys to page through the other symbols, if
desired.
Press the key that corresponds with the symbol that you wish to enter.
For example, press
for an exclamation point (!).
Repeat these steps to insert additional symbols into your message.
Entering Text
36
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
The following options appear in the display:
Find — Find a phone number By Name.
•
Tip: You can also access the Find option from standby mode, by pressing the
Contacts shortcut (Up Navigation) key.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
•
•
•
Add New Contact — Add a number or e-mail address to your
Contacts.
Contacts
Speed Dial — Assign a Contacts entry to a Speed Dial number.
Up to 500 entries can be stored in Contacts. Each entry can have
up to five associated phone numbers and one e-mail address.
Each phone number can be up to 32 digits in length, including 2-
more information), and associated names can be up to 32
characters in length. You can assign the Speed Dial numbers of
your choice for each entry. You can also mark your Contacts list
as Restricted to prevent unauthorized viewing. (See “Restriction”
on page 111 for more information).
Group — Review, send messages to, add Contacts to, or rename
for more information.)
• Metro411
—
Launches Metro411 Directory Assistance. (For more
information, contact your Wireless Carrier.)
•
Memory Info — Display used and available memory for Contacts
entries.
Tip: To launch the Contacts menu using a voice command — In standby
mode, press and hold
until the phone prompts, “Say a
Tip: Speed Dial One-Touch Dialing, Two-Touch Dialing, and Three-Touch
command.” Say “Go to Contacts” into the microphone.
Dialing allow you to call numbers stored in Contacts faster.
2. Select the desired option.
Open Contacts
OK
1. In standby mode, press , then select Contacts.
37
•
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
Tip: You can also press the keypad number key that corresponds to the menu
option number.
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Finding a Contacts Entry
Voice Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
information.)
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Note: The Lookup command shows the requested contact information in the
•
•
To say the name again, press the Repeat soft key.
To exit VoiceSignal without dialing, press
display but does not dial any phone numbers for the contact.
.
To look up information for a specific contact:
5. The contact information for the name you selected appears
1. In standby mode, press and hold
to launch
in the display.
VoiceSignal.
•
•
•
•
To dial the number associated with the name, press
.
To erase this entry from your Contacts list, press the Erase soft key.
“Say a Command” appears in the display and is
OK
To add or change information for this entry, press EDIT
(
).
pronounced through the speaker.
For more options, press the Options soft key and the following
options pop-up in the display:
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
–
–
–
–
Send Txt Msg
Send Pic Msg
3. Speak clearly and say the full name of the person you want
Call
to call, exactly as it is entered in your Contacts list.
Send Name Card Via Bluetooth
Understanding Your Contacts
38
Shortcut Key Method
•
•
•
To add or change information for this entry, press the Edit soft key.
OK
To show information about the entry., press VIEW
(
)
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly.
For more options, press the Options soft key and the following
options pop-up in the display:
1. In standby mode, press the Contacts soft key or the
–
–
–
New Contact — Add a new entry to Contacts.
Contacts shortcut (Up navigation) key.
Erase — Erase the name and associated information.
The Find screen appears in the display with the Go To field
Send Txt Msg — Create and send a text message to the selected
Contact.
and the first Contacts entry highlighted.
–
Send Pic Msg — Create and send a picture message to the selected
Contact.
Tip: You can also access the Find screen from the Contacts menu by
selecting Find.
–
–
Call — Dial the number associated with the name.
Send Name Card Via Bluetooth — Send a copy of a Contacts entry
to another Bluetooth device.
2. Enter a name as entered in Contacts. For example, if you
saved the name as “Amy Smith”, begin the search by
Select an option. The selected option’s sub-menu appears in the
display.
pressing
or (for “A”).
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
As you enter letters, the names of the closest matches
appear in the display.
3. When the desired entry is listed in the display, highlight the
Dial Method
entry.
1. Using the keypad, enter the number you wish to add to
•
To dial the default number associated with the name, press
.
your Contacts.
Tip: You can select another number assigned to the name by using the Left/
2. Press the Save soft key.
Right navigation keys.
The following options appear in the display:
39
•
•
Create New — Lets you create a new Contacts entry.
The Add New Entry screen appears in the display with the
Update Existing — Lets you add the number you entered to an
existing Contacts entry.
Name field highlighted.
3. Select Create New. The Create New screen appears in the
display showing the following icons:
3. Highlight one of the following fields:
Mobile
Home
Work
Pager
Fax
•
•
•
•
•
•
•
•
Mobile
Home
Work
Pager
Email
Group
Ringtone
Fax
4. Enter a phone number or e-mail address in the highlighted
4. Select the number type that matches your new entry.
field.
5. Use the keypad to enter a name to associate with the
5. Repeat steps 3 and 4 as needed.
Contacts entry.
OK
6. Press
or
to save the new entry.
OK
6. Press
or
to save the new entry.
Menu Method
1. From the Contacts menu, select Add New Contact.
Understanding Your Contacts
40
–
information).
Editing a Contacts Entry
Editing Contacts Name and Numbers
Select the desired option.
5. When you’re finished changing the contents of a field,
OK
OK
press
or
. Your changes are saved and a
2. Highlight the entry and press VIEW
(
or
). The View
confirmation message appears in the display.
Contact screen appears in the display showing the
highlighted entry’s information.
Add Pauses to Contacts Numbers
3. Use the Up/Down navigation keys to review the information
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
OK
for the entry that you wish to change, then press EDIT (
or
). The Edit Contact screen appears in the display.
4. Highlight the particular information you want to add or
change.
•
Wait — Stops the calling sequence until the phone receives further
input.
•
•
To backspace and delete numbers or letters, press or
To clear all numbers or letters in the highlighted field, press and
hold or
.
•
2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
.
•
For more options, press the Options soft key and the following
Note: You can enter multiple Waits to extend the length of a pause. For
example, two consecutive Waits cause a total pause time of four
seconds. Keep in mind that pauses count as digits towards the 32-digit
maximum.
options pop-up in the display:
–
–
–
Set Speed Dial Remove speed dial — Assign/remove a speed dial
/
Set as default — Set the number the phone will dial when Contacts
dialing, speed dialing, or voice dialing.
Wait — A hard pause (waits for input from you).
41
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
Edit an Existing E-mail Address
2. Highlight the desired Contacts entry, then press the Edit
soft key.
The Edit Contact screen appears in the display.
3. Press the Options soft key. The following pause options
3. Highlight the Email field.
appear in the display:
•
•
Wait — A hard pause (waits for input from you).
2-Sec Pause — A 2-second pause after which dialing resumes.
OK
5. Press
or
to save your changes.
4. Select the desired pause to add it to the number sequence.
Assigning a Picture to a Contacts Entry
OK
5. When you’re finished entering information, press
or
When you assign a picture to a Contacts entry, the picture you
assign appears in the display when you receive a call from that
Contact.
to store the number to Contacts.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
recall the number from Contacts.
2. If you stored the number using Wait(s), recall the number
from Contacts and wait for the appropriate prompt from
the dialed number.
2. Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
3. Highlight the Picture ID field (at the top of the Edit
3. Press
to dial the number.
Contact screen), then press the Set soft key.
Understanding Your Contacts
42
A photo gallery screen appears in the display, showing a
2. Highlight the desired Contact, then press the Edit soft key.
The Edit Contact screen appears in the display.
3. Highlight the Ringtone field, then press the Set soft key.
The Contact Tone menu showing the following options
appears in the display:
4. Select the picture that you wish to assign to the Contacts
entry.
•
•
My Ringtones
My Sounds
If there is no usable picture in the photo gallery screen:
•
•
•
Press the Camera soft key. The camera viewfinder screen appears
in the display.
4. Select the desired option. The My Ringtones file list or the
OK
Press TAKE
the display.
(
or
). The picture you have taken appears in
My Sounds file list appears in the display.
5. Select the ringtone or sound that you wish to assign to the
Contacts entry. The Contacts entry screen appears in the
display with the name of the selected file in the Ringtone
field.
OK
Press OK
(
or
).
5. The Contacts entry screen appears in the display with a
thumbnail view of the selected picture in the Picture ID
field.
OK
6. Press
or
to save the ringer assignment to the
OK
6. Press
or
to save your Picture ID assignment.
selected Contacts entry.
Assigning a Ringtone to a Contacts Entry
Saving a Number After a Call
Once you finish a call, you can store the caller’s number to your
Contacts list.
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assign when you receive a call from that
Contact instead of the Voice Calls ringtone.
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
43
1. Press
to end your call. The call time, length of call,
Work
phone number, and name of the party (if available) appear
in the display.
Pager
2. Press the Save soft key. The Save screen appears in the
Fax
display showing the following options:
•
•
Create New — Lets you create a new Contacts entry.
2. Select the number type that matches your new entry.
Update Existing — Lets you add the number you entered to an
existing Contacts entry.
page 33 for more information.)
3. Select the desired option, then follow the instructions in
the upcoming sub-sections depending on whether the
number is a new entry or you are adding it to an existing
entry.
OK
4. Press
or
to save the new entry to your Contacts
list.
Add to an Existing Entry
1. From the Save screen, select Update Existing. The
Update Existing screen appears in the display showing
your Contacts list with the Go To field and the first
Contacts entry highlighted.
Create a New Entry
1. From the Save screen, select Create New. The Create
New screen appears in the display showing the following
number type options:
2. Find and select the Contacts entry to which you want to
page 38 for more information.)
Mobile
Home
Understanding Your Contacts
44
The following number type options appear in the display:
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers. For
example:
Mobile
Home
Work
Pager
Fax
•
•
•
To speed dial the Contacts entry assigned to Location 5, press and hold
or , (1-touch dialing).
To speed dial the Contacts entry assigned to Location 35, press
or then press and hold or , (2-touch dialing).
To speed dial the Contacts entry assigned to Location 235, press
or , press or , then press and hold hold or
(3-touch dialing).
,
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Note: Number types that are already assigned a number show the number
instead of the number type label.
Assignment During Entry Creation
3. Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
To assign a Speed Call number to a new Contacts entry number,
do the following:
1. Follow either of the New Contacts entry procedures (see
a name for the entry.
OK
4. Press
or
to save your changes to the existing
entry.
OK
2. After entering the Contacts entry name, do not press
or
. Instead, highlight the number field to be assigned a
Speed Dial number.
45
3. Press the Options soft key, then select Set Speed Dial. The
3. Highlight the number field marked by the Speed Dial icon
).
Speed Dial screen appears in the display.
(
4. Highlight an Unassigned Speed Dial number or enter an
Unassigned Speed Dial number in the Go To field using
either keypad.
4. Press the Options soft key, then select Remove speed dial
“Remove speed dial?” prompts you to confirm your
desire to remove the entry.
.
5. Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the
display, and you are returned to the Edit Contact screen.
Important!: Do not enter Speed Call numbers 1 or 911. These numbers are
already assigned to Voicemail (001) and to emergency use (911).
OK
5. Press SET ( or
). You are prompted to confirm your
Speed Dial number assignment.
6. Press the Yes soft key to save your Speed Dial assignment
Contacts Groups
and return to the Add New Entry screen.
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
Press the No soft key to discard the assignment and return
to the Speed Dial screen.
OK
7. Press
or
to save your changes.
Add Contacts Entry to a Group
Changing a Speed Dial Location
Using Add New/Edit Contact Option
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
2. Highlight the desired entry, then press the Edit soft key.
Understanding Your Contacts
46
OK
add to a Group.
4. Press
or
to save your changes.
Using Group Add Option
The Add option lets you add one or more existing Contacts to a
Group.
– Or –
1. From the Contacts menu, select Group.
page 38 for more information) that you want to add to a
Group.
The Group List screen appears in the display showing
Groups similar to the following:
•
•
•
•
•
No Group
Business
Colleague
Family
2. Highlight the Group field, then press the Set soft key.
The Select Group screen appears in the display showing
Groups similar to the following:
•
•
•
•
•
No Group
Business
Colleague
Family
Friends
2. Highlight a Group, then press the Options soft key. The
following options pop-up in the display:
•
•
•
•
•
Send Txt Msg
Send Pic Msg
Rename
Erase
Friends
3. Select the Group to which you want to assign the selected
Contact.
You are returned to the Add New Entry/Edit Contact
screen and the selected Group name populates the Group
field.
Add
3. Select Add. The Add Contacts screen appears in the
display showing a list of Contacts entries.
47
4. Do one of the following:
The Rename Group screen appears in the display.
•
Highlight a Contacts entry you want to add to the group, then press
4. Enter changes to the group name using either keypad.
OK
MARK
(
or
). A checkmark appears in the entry’s
checkbox.
5. When you have completed your changes to the Group
Repeat as needed to check all the desired Contacts.
OK
name, press SAVE ( or
).
•
Press the Mark All soft key.
“Group Renamed” appears in the display followed by the
Note: To unmark a marked Contact, highlight the Contact and press MARK
OK
(
or
) to clear the checkmark.
Group List screen showing your renamed Group.
Add a New Group
5. When you have marked the Contacts you want to add to
the group, press the Done soft key. “Contact added to
group” appears in the display, followed by the selected
Group list including the added Contacts.
The New option lets you add Groups.
1. From the Contacts menu, select Group. The Group List
screen appears in the display.
2. Press the New soft key. The New Group screen appears in
Rename a Group
the display.
The Rename option lets you change the name any of the Groups,
except No Group.
3. Enter a new group name using either keypad. (See
1. From the Contacts menu, select Group. The Group List
screen appears in the display.
OK
4. Press SAVE ( or
). “Group Saved” appears in the
2. Highlight a Group name (other than No Group) that you
display followed by the Group List screen showing your
new Group.
wish to change, then press the Options soft key.
3. Select Rename.
Understanding Your Contacts
48
Erase a Group
Metro411
The Erase option lets you delete a Group, thus freeing you to
The Metro411 menu option lets you access Metro411 Directory
reassign the Contacts formerly in the Group.
Assistance service.
1. From the Contacts menu, select Group. The Group List
1. Open the QWERTY keypad.
screen appears in the display.
Note: Metro411 is only accessible using the QWERTY keypad.
2. Highlight the Group you wish to delete, then press the
2. From the Contacts menu, select Metro411
Metro411 Diretory Assistance screen appears in the
display.
.
Options soft key, and select Erase.
A
You are prompted to confirm the Group erasure.
3. Press the Yes soft key to confirm erasure of the highlighted
Group. Press the No soft key to retain the Group.
Note: For more information about Metro411 Directory Assistance service, contact
your Wireless Carrier.
Note: When you delete a Group, the assigned Contacts entries return to No
Group
.
Memory Info
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
Deleting a Contacts Entry
ᮣ
From the Contacts menu, select Memory Info.
2. Highlight the desired entry, then press the Options soft
key, and select Erase. The phone prompts you to confirm
the erasure.
The Memory Info Contacts screen appears in the display
showing the amount of memory Used and remaining (Free)
for Contacts entries.
3. Press the Yes soft key to confirm erasure of the selected
Contact. Press the No soft key to retain the Contact.
49
Section 7: @metro
With @metro, you can download full featured applications over
the air including games, personalized ring tones, pictures, and
more. You can send and receive instant messages and email, or
browse the web to catch up on all the latest news.
The @metro menu appears in the display as shown.
Applications Shopping and Downloading
Download games, ring tones, e-mail, and more using the Mobile
Shop. For information on airtime charges, contact your Wireless
Carrier.
This section outlines how to obtain games and other applications
for your phone. For more information, contact your Wireless
Carrier.
1. At the @metro menu, select the Mobile Shop (
).
Accessing @metro (Mobile Shop)
1. Open the QWERTY keypad.
Note: The first time you access Mobile Shop, “Browsing online and
downloading apps may incur network usage charges” appears in
the display along with instructions on how to remove this message.
Note: @metro is only accessible using the QWERTY keypad.
Your phone takes a moment to connect, then the Mobile
Shop Catalog menu appears in the display.
2. In standby mode, do
one of the following to
launch @metro:
2. Follow the instructions in your phone’s display.
Note: Please check with your Wireless Carrier for availability of applications.
Changing Your @metro Settings
•
Press the Right
navigation key or
.
•
Press
@metro
, then select
@metro
Use the Settings menu in Mobile Shop to manage, move, order
applications, and much more.
➔
.
@metro
50
Buying New Apps
1. At the @metro menu, select Settings ( ). The following
options appear in the display:
To buy new and exciting apps, visit the MobileShop. It provides
you with a variety of apps you can choose from.
•
•
Order Apps — Download applications over the network.
What do I pay?
Move Apps — Move previously downloaded applications between
available folders.
When you buy an app, you will be charged for the purchase cost
of the app.
•
•
Manage Apps — View used and available memory.
Main Menu View — Select whether you wish to view the main
Mobile Shop menu in a list or icon format.
Demo Apps
A Demo app is free and is designed to demonstrate the app’s
main features. It usually expires after a certain period of time or a
number of uses and often has limited functions. When you run a
demo app, you will be presented with a purchase option so you
won’t have to look for the app in the MobileShop.
•
View Log — View the Mobile Shop log, which displays information
about recent activity using Mobile Shop.
2. Select the desired option to enter the option’s sub-menu
and view or change settings.
Removing Apps
Using On-line Help
The Help sub-menu within @metro is a short tutorial on several
@metro-Mobile Shop features. View information about charges,
cancelling subscriptions, buying apps, disabling apps, and more.
You may remove apps that are no longer needed. When you
remove an app, you cannot use the application unless you
purchase it again. To remove an app, choose Settings > Manage
Apps. Then, select the app you want to remove.
1. At the @metro menu, select Help ( ). The Help subjects
?
Disabled Apps
described in the following subsections appear in the
display.
You can install new apps even if the memory of your phone is full
by partially removing (disabling) apps you haven’t used recently.
When you need to use a disabled app, you can restore it at no
additional purchase cost.
2. Select the desired Help subject to view the selected Help
information.
51
Restoring Apps
Disabled apps can be quickly restored at no additional purchase
cost. To restore an app, run the application you want to restore
from the Main Menu. You will be guided through the restoration
process.
Expired Apps
Apps that were purchased based on the number of uses or time
expire. You can purchase additional uses from the MobileShop.
@metro
52
Section 8: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold or until the phone prompts,
“
Say a command.” Say “Send Text” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
2. Enter the phone number or e-mail address of the recipient,
OK
then press
or
. The Text: appears in the display.
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
,
3. Enter the text content of your message using either
information.)
Note: Available memory is shared between all messages. You can store up to
100 messages. However, the exact number is dependent upon
message length.
4. At any point while composing a message:
Create and Send Text Messages
1. In standby mode, press the Messages shortcut (Down
•
To change the text entry mode, press the Left soft key and select
the desired text entry mode, repeatedly press and hold , or
navigation) key or press
, then select Send Message
press
page 33.)
➔ Text Message. The Create Txt Msg screen appears in
•
To complete the message text and set message send options,
press the Options soft key. The following options appear in the
display:
the display showing the To: list.
53
–
–
–
–
–
Edit Send To — Edit the recipient’s number or email address.
Add Quick Text — Insert pre-composed text in your message.
Save As Draft — Save the message to your Draft folder.
Receive Messages While in a Call
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon ( ).
The date and time of the message also appear in the display
along with the following options:
Priority Level — Choose High or Normal
Validity Period — Enter the Date when this message will cease to be
valid, then use the Left and Right navigation keys to choose the Time
.
.
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
–
–
Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
Add To Contacts — Save the recipient’s number or e-mail address as
a Contacts list entry.
•
View Later — Saves the message to your inbox, where you can view
it later, and returns your phone to call mode.
5. Once you’re finished entering your message, press SEND
Select the option of your choice.
OK
(
or
).
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display
along with the closed envelope icon ( ). The date and time of
the message also appear in the display along with the following
options:
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send to field of the
Picture message composer.
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
1. In standby mode, press and hold the Camera key
(
). The camera viewfinder screen appears in the
•
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
display.
Select the option of your choice.
Messaging
54
2. Using the display as a viewfinder, when the image that you
8. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 10.
OK
wish to send appears in the display, press TAKE
(
or
) to take a picture.
•
Press the Sounds soft key. The My Sounds screen appears in the
display showing the following options:
Note: For more information about using the camera feature in your phone,
–
Record New — Record a new memo to insert into the message.
OK
3. Press Send
(
or
) to save the picture and begin
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
delivery process. The Create Pic Msg screen then appears
in the display with the Send To: list highlighted.
4. Enter the phone number or e-mail address of the recipient
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
OK
of the Picture message, then press
or
.
Select an option to insert a sound into your message.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
,
Press or
to exit the pop-up menu without inserting a sound.
9. To complete the message text and set message send
options, press the Options soft key. The following options
appear in the display:
5. The Subject: field appears in the display. Enter a subject
for the Picture message using the keypad. (See See
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Quick Text — Add precomposed text to your message.
Save As Draft — Save the message to your Draft folder.
6. Press the Down navigation key until the Text: field is
highlighted, then enter the message text using the keypad.
Priority Level — Choose High Normal, or Low.
,
7. Your new picture appears in the PIC: field.
55
•
•
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
1. In standby mode, press the Messages shortcut (Down
navigation) key or press , then select Send Message
Time
.
➔ Picture Message. The Create Pic Msg screen appears
in the display with the Send To tab highlighted and
showing the To: list.
Delivery Ack — Choose On or Off — Requests confirmation when
your message is received.
•
•
•
Remove Pic — Remove the picture from your message.
Remove Sound — Remove the sound file from your message.
Tip: To launch the Create Pic Msg screen using a voice command — In
Add To Contacts — Save the recipient’s number or e-mail address
as a Contacts list entry.
standby mode, press and hold
or
until the phone prompts,
“
Say a command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
Select the desired option.
OK
10. Press
or
to send the message. “Pic Msg
2. Enter the phone number or e-mail address of the recipient
Sending” appears in the display and a progress bar
indicates the send status.
OK
using the keypad, then press
or
.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the To: list.
,
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
3. The Subject: field appears in the display. Enter a subject
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
4. Highlight the Text: field, then enter the message text using
information.)
Messaging
56
5. Highlight the PIC: field, then press the My PIC soft key. A
8. Do one of the following:
photo gallery of thumbnail images appears in the display.
•
Select a file from the list of previously recorded voice memos and
preloaded audio files on your phone.
6. Do one of the following:
•
Select Record New and record a new voice memo, then select the
new recorded sound file to add it to the message.
•
•
Select a picture to add it to your message.
To expand the highlighted picture for easier viewing, press the VIEW
soft key.
include a new picture by doing the following:
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
–
–
–
Press the Camera soft key. The Camera viewfinder screen appears.
OK
Press TAKE
(
or
or
) to take the picture.
).
•
Press or
sound.
to exit the My Sounds screen without selecting a
OK
Press SEND
(
9. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Note: For more information about using the camera feature in your phone,
•
Press or
a picture.
to exit the photo gallery screen without selecting
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Quick Text — Add precomposed text to your message.
Save As Draft — Save the message to your Draft folder.
You are returned to the Create Pic Msg screen with the
selected picture in the PIC: field.
Priority Level — Choose High Normal, or Low.
,
7. If you wish to insert a sound into your Picture message,
highlight the Sound: field, then press the Sounds soft key.
The My Sounds screen appears in the display.
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
the Time
.
•
Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
57
•
•
•
Remove Pic — Remove the picture from your message.
appears in the display.
Remove Sound — Remove the sound file from your message.
2. Select the new message. “Connecting” appears in the
display followed by “Retrieving” and a progress bar
indicating that the message is downloading to your phone.
Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
Select the desired option and setting.
3. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
OK
10. Press SEND
(
or
) to send the message. “Pic Msg
Sending” appears in the display and a progress bar
indicates the send status.
Receive Picture Messages
Note: For more information on viewing and managing received picture
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and New Message appears in the
display along with the closed envelope icon ( ). The date and
time of the message also appear in the display along with the
following options:
View a Picture Message Now
1. After you select the View Now option, “Connecting”
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
•
View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
Select the desired option.
View a Picture Message Later
1. In standby mode, press the Messages shortcut (Down
navigation) key or press
, then select Inbox. The Inbox
Messaging
58
3. While viewing your message press the Options soft key.
Message Boxes
The following options appear in the display:
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
•
Replay — Play the sound file included in the picture message
again.
Inbox
•
•
Forward — Send a copy of this message to another recipient.
Received messages of all types (except Voicemail) are stored in
the Inbox.
Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
1. In standby mode, press the Messages shortcut (Down
navigation) key or press
, then select Inbox. The Inbox
•
•
•
•
Save Sound — Save the sound file included in this message to
the My Sounds folder.
appears in the display showing a list of received
messages.
Save Pic — Save the picture included in this message to the My
Images folder.
Tip: While in a call, press the Options soft key, then select Messages
.
Save Quick Text — Save the text in this message as a new Quick
Text.
2. Highlight the message you wish to view, then press OPEN
Lock Unlock — Block/permit erasure of the highlighted
/
message.
OK
(
or
) to view contents of the highlighted message.
•
•
Add To Contacts — Save the sender’s number to your Contacts.
3. While viewing your message, press the Options soft key.
Message Info — Shows message delivery status, addressee,
size, and so on.
The following options appear in the display:
•
•
Forward — Send a copy of this message to another recipient.
4. Select an option to perform its function.
Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
Note: For more information on received picture message options, see
•
Save Sound — Picture Messages Only — Save the audio file
(sound) included in this message to the My Sounds folder.
59
•
•
•
Save Pic — Picture Messages Only — Save the picture included
•
To remove the highlighted message from the Inbox, press the Erase
in this message to the My Images folder.
soft key.
OK
Save Quick Text — Save the text in this message as a new Quick
Text.
•
•
To review the highlighted message, press OPEN
(
or
).
For more options, press the Options soft key. The following options
appear in the display:
Lock
/
Unlock — Block/permit erasure of the highlighted
message.
–
–
Reply — Compose and send a reply message to the originator of the
received message.
•
•
Add To Contacts — Save the sender’s number to your Contacts.
Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the original
message.
Message Info — Shows message delivery status, addressee,
size, and so on.
•
Extract — Calls the sender of the received message.
–
–
–
–
–
Forward — Send a copy of this message to another recipient.
4. Select an option to perform its function.
Lock Unlock — Block/permit erasure of the highlighted message.
/
Messages and Lock Mode
Add To Contacts — Save the sender’s number to your Contacts.
Erase Inbox — Delete all unlocked messages from the Inbox.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Message Info — Shows message delivery status, addressee, size,
and so on.
Select an option to perform its function.
Managing Inbox Messages
Outbox
1. In standby mode, press the Messages shortcut (Down
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or e-mail was successfully received by
enabling the Enh. Delivery Ack/Delivery Ack feature.
navigation) key or press
, then select Inbox. The Inbox
appears in the display showing a list of received
messages.
2. Highlight a message in the list, you have the following
options:
Messaging
60
Review Messages in the Outbox
Managing Outbox Messages
1. In standby mode, press the Messages shortcut (Down
1. In standby mode, press the Messages shortcut (Down
navigation) key or press
, then select Outbox. Your list
navigation) key or
, then select Outbox. Your list of
of sent messages appear in the display.
sent messages appear in the display.
2. Highlight a message in the list, you have the following
2. Highlight a message in the list, you have the following
options:
options:
•
To remove the highlighted message from the Inbox, press the Erase
soft key.
•
To remove the highlighted message from the Inbox, press the Erase
soft key.
OK
OK
•
•
To review the highlighted message, press OPEN
(
or
).
•
•
To review the highlighted message, press OPEN
(
or
).
For more options, press the Options soft key. The following options
For more options, press the Options soft key. The following options
appear in the display:
appear in the display:
–
–
–
Play Again — Replay the sound file in a Picture message.
–
–
Forward — Send the highlighted message to another recipient.
Forward — Send the highlighted message to another recipient.
Resend — Send another copy of the highlighted message to the
original recipient
Erase — Delete this message from the Outbox, if the message is
Unlocked.
–
–
–
–
Lock Unlock — Block/permit erasure of the highlighted message.
/
–
–
Lock
/
Unlock — Block/permit erasure of the highlighted message.
Add To Contacts — Save the recipient’s number to your Contacts.
Save Quick Text — Save the message text as Quick Text for insertion
into other messages.
Erase Outbox — Erase all Unlocked messages from the Outbox.
Message Info — Shows message delivery status, addressee, size,
–
–
Add To Contacts — Save the recipient’s number to your Contacts.
and so on.
Message Info — Shows message delivery status, addressee, size,
and so on.
Select an option to perform its function.
–
Extract — Calls the originator of the message.
Select an option to perform its function.
61
View and Edit Draft Text Messages
Draft Box
1. In standby mode, press the Messages shortcut (Down
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
navigation) key or
, then select Drafts. A list of any
draft messages that you’ve saved appears in the display.
Create a Draft Message
2. Highlight a text message that you wish to view or edit, then
1. In standby mode, press the Messages shortcut (Down
OK
press EDIT
(
or
). The Create Txt Msg screen appears
navigation) key or
, then select Send Message and
in the display.
then select one of the following Send Message options:
3. Enter or change the recipient’s number and/or e-mail
address and the message text using the keypad. (See
•
•
Text Message
Picture Message
The Create Txt Msg screen or Create Pic Msg screen
4. To complete the message text and set message send
options, press the Options soft key. The following options
appear in the display:
appears in the display showing the To: list.
2. Enter the phone Number or E-Mail address of a recipient,
OK
then press the
key.
•
Edit Send To — Change, add, or remove recipients from this
message.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
,
•
Add Quick Text — Insert pre-composed text into your message
text.
•
•
•
Save As Draft — Save the message to your Drafts box.
3. Compose your message using either keypad, press the
Priority Level — Choose High or Normal
.
Options soft key, then select Save As Draft. “Message
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
saved” appears in the display and your message is saved
to the Drafts box.
the Time
.
Messaging
62
•
•
Delivery Ack — Choose On or Off — Requests confirmation
•
•
Validity Period — Enter the Date when this message will cease
when your message is received.
to be valid, then use the Left and Right navigation keys to choose
the Time
.
Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
5. Select an option to perform its function.
•
•
•
Remove Pic — Remove image included in draft message.
6. When you have completed composing your message,
Remove Sound — Remove sound file included in draft message.
OK
press SEND
(
or
) to send it.
Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
View and Edit Draft Pic. Messages
4. Select an option to perform its function.
1. In standby mode, press the Messages shortcut (Down
navigation) key or
, then select Drafts. A list of any
5. When you have completed composing your message,
draft messages that you’ve saved appears in the display.
OK
press SEND
(
or
) to send it.
2. Highlight the picture message that you wish to view, then
Managing Draft Messages
OK
press EDIT key ( or
). The Create Pic Msg screen
1. In standby mode, press the Messages shortcut (Down
navigation) key or , then select Drafts. A list of any
appears in the display.
3. Make any needed changes and press the Options soft key.
draft messages that you’ve composed appears in the
display.
The following options appear in the display:
•
Preview — Shows the message contents.
2. Highlight a message, then do one of the following:
• Add Quick Text — Insert pre-composed text into your message
text.
•
To remove the highlighted message from the Drafts box, press the
Erase soft key.
•
•
Save As Draft — Saves the changed message to the Draft Box.
Priority Level — Choose High Normal, or Low
,
.
63
•
To access other options, press the Options soft key. The following
2. Follow the voice prompts to access your voicemail
options appear in the display:
messages.
–
Send — Send the highlighted message to the number or e-mail
Listen to Voicemail Later
address currently included with the message.
–
–
Lock Unlock — Block/permit erasure of the highlighted message.
/
If you have chosen to review your voicemail messages at a later
time:
Add To Contacts — Save the recipient’s number and/or e-mail
address to your Contacts.
1. In standby mode, press the Messages shortcut (Down
–
–
Save Quick Text — Save the message text as Quick Text for insertion
into other messages.
navigation) key or
, then select Voicemail. The
Voicemail screen appears in the display, showing the
number of new voicemail messages received and the date
and time the latest message was received.
Erase Drafts — Delete all unlocked draft messages.
Select an option to perform its function.
Voicemail
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
details of the Voicemail message.
Tip: You can also access your voicemail from standby mode, by pressing and
holdolding
or
to speed call your voice mailbox.
2. Follow the voice prompts to access your voicemail
When you’re notified of a new voicemail message by an alert
tone and the new message icon, the following options pop:
messages.
•
Listen Now — Calls your voice mailbox and lets you listen to your
messages.
Erase Messages
You can erase all of the messages in any or all of message boxes
usin one convenient sub-menu.
•
Listen Later — Returns you to standby mode where you can choose
to call your mailbox and review your messages at a later time.
Listen to Voicemail Now
1. In standby mode, select Listen Now in the New Voicemail
pop-up. Your phone automatically calls your voice mailbox.
Messaging
64
General Message Settings
1. In standby mode, press the Messages shortcut (Down
Note: This function erases all messages in the selected message box. To
delete a single message, go to the respective message box, highlight
the message, and press the Erase soft key. (For more information, refer
navigation) key or press
, then select Msg Settings ➔
General. The following options appear in the display.
•
•
•
Auto Save — Choose whether your messages are saved
automatically when you exit them (On Off Prompt).
1. In standby mode, press the Messages shortcut (Down
,
,
navigation) key or press
, then select Erase
Auto Erase
—
Choose to receive (On) or not receive (Off) a
Messages. The following options appear in the display:
warning message when you delete a message.
•
•
•
•
Inbox — Deletes all unlocked messages stored in the Inbox.
Outbox — Deletes all unlocked messages stored in the Outbox.
Drafts — Deletes all unlocked messages stored in the Drafts box.
Quick Text — Edit your pre-composed messages, which can then
be inserted into new messages.
•
•
Voicemail # — Edit or view your Voicemail number.
Entry Mode — Choose the default method for entering text into
All Messages — Deletes all unlocked messages stored in all of
the message boxes, except Voicemail.
messages (T9 Word Abc, ABC, 123).
,
•
Callback # — Choose whether to include a callback phone
number with your outgoing messages, and enter the number to be
included.
2. Select the message box containing the messages you
want to delete. You’re prompted to confirm the erasure of
all messages in the selected box or in all boxes.
•
•
Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
3. To delete the messages, press the Yes soft key. To cancel
Reminder — Select whether and how often you will hear and/or
deleting the messages, press the No soft key.
feel a reminder that you have received a message (Once Every 2
,
Message Settings
Minutes Every 15 Minutes, Off).
,
2. Select the desired option, then select the desired setting or
Use the Msg Settings sub-menus to define settings for general,
text, and picture messages.
enter the desired value.
65
Editing and Entering Quick Text
Text Message Settings
1. In standby mode, press the Messages shortcut (Down
1. In standby mode, press the Messages shortcut (Down
navigation) key or press
, then select Msg Settings ➔
navigation) key or press
, then select Msg Settings ➔
General ➔ Quick Text. The Quick Text sub-menu
Text Message. The following options appear in the
appears in the display.
display.
•
•
•
Auto View — On/Off — With Auto View On, the full content of a
2. Select a Quick Text you want to change.
text message appears in the display as the messages is received.
Note: You cannot change the pre-defined Quick Text included with your
Signature — Create a signature, which can be included at the
bottom of outgoing message text.
phone.
Auto Scroll — On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screen-
full at a time.
3. To create a new Quick Text, press the New soft key.
Tip: You can also create new Quick Text by viewing/editing an Outbox
2. Select the desired option, then select the desired setting or
enter the desired value.
4. Enter/change the text content of your Quick Text using
information.)
Picture Message Settings
1. In standby mode, press the Messages shortcut (Down
navigation) key or press
, then select Msg Settings ➔
OK
5. To save your finished Quick Text, press
or
. The
Picture Message. The following options appear in the
Quick Text menu appears in the display with your new
display.
Quick Text highlighted.
•
Auto Receive — On/Off — With Auto Receive On, Picture
messages automatically download and display as they are
received. With Auto Receive Off, you are prompted to download
Picture messages.
Messaging
66
•
Signature — Create a signature, which can be included at the
bottom of outgoing Picture message text.
• Reply — Select type of message to be sent (TXT Message or
Picture Message) when you reply to Picture messages.
2. Select the desired option, then select the desired setting or
enter the desired value.
67
Section 9: MetroWEB
This section outlines how to launch MetroWEB, how to navigate
to other pages on the web, and how the keys on the QWERTY
keypad are used with the web application. Additionally, links to
other sites are briefly discussed.
2. In standby mode, do one of the following to launch
MetroWEB:
•
Press
.
– Or –
Press
MetroWEB
•
, then select MetroWEB
➔
MetroWEB.
With MetroWEB, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch MetroWEB, your phone connects to the Internet and
3. A list of categories (each representing one or more web
sites) appears in the display.
4. Use the arrow keys to browse the categories.
the service indicator icon (
) appears in the display.
Stored Web Content
5. Once the desired category is highlighted, press the
soft key to enter the category list.
MetroWEB ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Exit MetroWEB
ᮣ
To exit MetroWEB, press
or close the QWERTY
keypad.
Using MetroWEB
When you use MetroWEB, some of the keys operate differently
than during a normal phone call. MetroWEB presents on-screen
items in any of the following ways:
Launching MetroWEB
1. Open the QWERTY keypad.
•
•
Text or numeric input.
Note: MetroWEB is only accessible using the QWERTY keypad.
Links (embedded in content).
MetroWEB
68
•
•
Numbered options (some may not be numbered).
Simple text.
SHIFT Key — Press before entering text to enable
uppercase characters.
Spacebar — Press to insert a space when entering
text.
You can act upon options or links by using the soft keys.
MetroWEB soft keys
Number 1 thru 0 — Use the number keys to select
items in a menu if they are numbered.
At the bottom of the MetroWEB display is a bar that contains
browser commands. The Left and Right (
) soft keys on
the keypad are used to execute the commands that appear in
their respective corners of the display. These are called “soft
keys” because their functions change depending on the
application.
End Key — Press to exit the MetroWEB and return
the phone to standby mode.
Left Soft Key — Press to activate the command that
appears above it in the display.
Using Links
Right Soft Key — Press to activate the command
that appears above it in the display.
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key ( ) to select a link when it is highlighted.
How MetroWEB Keys Work
The following table lists MetroWEB keys and their functions.
Arrow keys — Use to browse lists and options.
Back Key — Press once to back up one page. Press
and hold to go back to home page.
Press once to clear the last number, letter, or symbol
entered. Press and hold to completely clear the entry.
69
Section 10: Voice SVC
This section explains how you can use and customize your
phone’s VoiceSignal voice recognition feature.
“Say a Command” appears in the display and plays through the
earpiece, followed by a list of available commands.
OK
•
In standby mode, press
Command
or
, then select Voice SVC
➔
Voice
Voice SVC Options
.
Your SCH-r450 includes VoiceSignal, state-of-the-art voice
recognition software that lets you use your voice to dial numbers,
access your Contacts list, and open Tools. To access your
phone’s voice recognition, do the following:
Note: You can also set your phone to start VoiceSignal when you connect an
OK
1. In standby mode, press
or
, then select Voice SVC.
The following voice commands appear in the display:
The following options appear in the display:
•
Call — Lets you dial the phone by saying any name stored in your
Contacts list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your Contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your Contacts list, by
more information.)
•
•
Voice Command — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
Voice Settings — Lets you tailor VoiceSignal to better respond to
on page 72 for more information.
•
•
•
Send Text — Lets you access Create Text Message.
Send Picture — Lets you access Create Picture Message.
Lookup — Lets you find a Contact by name and review the Contact’s
information.
2. Select the desired sub-menu.
Voice Command
To access the Voice Command menu, do one of the following:
•
In standby mode, press and hold
or
.
Voice SVC
70
•
Go to — Lets you access the following list of your phone’s features
and functions:
Voice Settings
To access the Voice Settings menu:
–
–
–
–
–
–
–
–
–
Contacts
Calls
OK
ᮣ
In standby mode, press
or
, then select Voice SVC
➔ Voice Settings.
Messages
MetroWEB
@metro
VoiceSVC
Multimedia
Tools
Choice Lists
When VoiceSignal cannot recognize a name or number, it
displays a choice list of up to three possible choices, and
prompts you to confirm the correct one.
Settings
You can select how VoiceSignal will use choice lists with name
dialing, digit dialing, and Contacts.
•
Check — Lets you say a single command (such as “Status”) to verify
your phone's: Status Signal Network Battery, or My phone #
,
,
,
.
To change the way VoiceSignal uses choice lists:
1. From the Voice Settings menu, select Choice Lists. The
following options appear in the display:
Note: Speaking clearly, say the command that you want to use. If VoiceSignal
does not recognize a command, it prompts you to repeat the
command. If VoiceSignal still does not recognized the command, it
tells you “Sorry, no match found” and cancels voice recognition.
•
•
•
Automatic — VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Voice Command Tips:
•
Always On — VoiceSignal always displays a choice list, even
when there is only one choice.
Make sure you wait for the beep before speaking.
Always Off — VoiceSignal never displays a choice list.
•
Speak clearly at a normal volume, as if you were talking on the phone.
2. Select a new setting or press or
to return to the
Voice Settings menu.
71
Tips for Adapting Digit Dialing
Sensitivity
•
•
•
•
Use Adapt Digits in a quiet place.
1. From the Voice Settings menu, select Sensitivity.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
2. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between Reject
More spoken commands or names and Reject Less
spoken commands or names.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
OK
3. Press
or
to accept the new setting. Press or
to discard the new setting and return to the Voice
Settings menu.
Digit Dialing
Adapt Digits
If you regularly have trouble with VoiceSignal not recognizing the
numbers you speak, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
To adapt digit dialing, do the following:
1. From the Voice Settings menu, select Digit Dialing. The
following options appear in the display:
•
•
Adapt Digits
Reset Digits
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
2. Select Adapt Digits. Your phone displays text describing
the Adapt Digits process.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
OK
3. Press
or
. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
Voice SVC
72
4. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
•
•
Adapt Digits
Reset Digits
2. Select Reset Digits. The phone prompts you to confirm
recording and prompts “Did the recording sound ok?”
digit rest.
•
•
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
3. Press the OK soft key to reset your digit adaptation, or
If you say “No,” the phone prompts you to pronounce the
press the Back soft key to cancel.
digits again. Wait for the beep and then say the digits.
Sound
Repeat this step until you’re satisfied with the recording.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
5. After confirming that the recording sounds “ok”, continue
1. From the Voice Settings menu, select Sound. The following
the recording process with the next set of digits.
options appear in the display:
6. After 10 sets of digits, the phone asks whether you want to
•
•
•
•
Prompts — On/Off — Enables or disables audio prompts.
Digits — On/Off — Enables or disables digit playback.
Names — On/Off — Enables or disables name playback.
do more adaptation. Answer “Yes.”
7. Repeat steps 4 and 5 for another 10 sets of digits. After the
second group of 10 sets of digits, “Adaptation complete”
plays through the speaker and you are returned to the
Digit Dialing menu.
Name Settings — Lets you adjust the Speed
(
Faster or Slower
)
and Volume
(Louder or Softer) of your phone’s audio name
playback.
2. Select the desired option and the desired setting, or
Reset Digits
OK
3. Press
or
to accept the new setting. Press or
To reset digit dialing to factory default settings, do the following:
1. From the Voice Settings menu, select Digit Dialing. The
following options appear in the display:
to discard the new setting and return to the Sound
menu.
73
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
1. From the Voice Settings menu, select Voice Launch. The
following options appear in the display:
•
Key Only — Press and hold
for one call.
or
to activate VoiceSignal
•
Key/EarMic — Attach a headset to your phone. Press and hold
or or press and hold the button on the headset to
activate VoiceSignal.
OK
2. Press
or
to accept the new setting. Press or
to discard the new setting and return to the Voice
Settings menu.
About
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
ᮣ
From the Voice Settings menu, select About.
The About VoiceSignal screen appears in the display
showing the version level of the VoiceSignal software
currently installed on your phone.
Voice SVC
74
Section 11: Multimedia
Use your SCH-r450 phone to take full color digital pictures,
display them on your phone’s vivid color display, and instantly
share them with family and friends.
The message “Loading...” followed by a camera
viewfinder screen appears in the display. (See “Camera
With Mobile Shop, you can download personalized ringtones,
pictures, and more. For more information, contact your
Wireless Carrier.
OK
Note: You can also activate the camera (from standby mode) by pressing
or
, then select Multimedia
➔
Camera.
2. Point the camera lens at your subject.
Note: Although the procedures in this section are written for the phone
keypad, you can also perform these procedures using the QWERTY
keypad.
OK
3. Using the display as a viewfinder, press TAKE
(
or
)
when the image that you wish to capture appears in the
display. You have the following options:
Camera
Taking Pictures
•
•
•
To save the picture to the Image gallery in your phone (a part of the
phone’s memory devoted to storing, browsing, and viewing saved
pictures), press the Save soft key.
Taking pictures with the built-in camera is as simple as choosing
a subject, pointing the lens [located on the outside of the folder
(above the external display)], and pressing a button.
To save the picture and include it in a Picture message, press Send
OK
(
or
Simple Snap Shot
To take a single picture using the current camera settings, do the
following:
To erase the photo, press the Erase soft key.
Tip: You can change a number of the camera’s settings to suit particular uses
information.)
1. In standby mode, press and hold the Camera key
(
) on the right side of the phone.
75
Camera Screen Icons
Camera Screen
Camera — Indicates that your phone is in Camera
mode.
When you activate your phone’s
camera, the second line of the
display is reserved for the current
camera resolution setting and the
picture counter. The center of the
display shows a viewfinder image
of the subject at which the camera
is pointed. The soft key labels on
the bottom line of the display
change to the following:
Night Shot — Replaces the Camera icon. Indicates
that your phone is ready to take photos in low light.
Resolution — Indicates the current Resolution
setting (240x320 and 320x240 shown).
Brightness — Indicates the current photo Brightness
setting [0 (no Brightness) shown]. The direction
arrows indicate that the Up and Down navigation
keys adjust the Brightness setting.
•
My Images — Pressing the
Left soft key ( ) opens
Zoom — Indicates the current Zoom setting [0 (no
Zoom) shown]. The direction arrows indicate that the
Left and Right navigation keys adjust the Zoom
setting.
the My Images gallery so
you can view or manage
your stored pictures.
Memory Counter — Indicates the maximum number
of photos you can take at the current Resolution and
Quality settings.
•
•
TAKE — Pressing the OK
OK
key (
)
takes a picture of
the image currently
Quality — Indicates the current photo Quality setting
(Fine shown).
appearing on the display.
Options — Pressing the Right soft key (
of camera settings.
) opens a pop-up menu
White Balance — Indicates the current photo White
Balance setting (Auto shown).
Multimedia
76
Self Timer — Delays the camera shutter by either 2,
Note: The Zoom setting is affected by the Resolution setting (camera mode).
OK
5, or 10 seconds after you press Take
(
or
).
With Resolution set to 960x1280, no zoom is available. With Resolution
set to 480x640 and lower, Zoom settings
0
–
8
are available.
Multi Shot — Automatically takes
multiple pictures in sequence after
1. In camera mode, press the Left and Right navigation/arrow
OK
you press Take
(
or
).
keys to zoom in and out on your subject.
Camera Shortcuts
OK
2. Press Take
(
or
) to take the picture.
You can use the Navigation key or the Arrow keys to quickly
access both the Brightness and Zoom capabilities of the built-in
camera. When you exit the camera mode, all camera settings
return to default values.
Camera Options
The Camera Options let you temporarily override your default
camera settings. Any settings you change using the Camera
Options only apply to the current camera session or until you
make another change using the Camera Options.
Brightness
1. In camera mode, change the brightness of your pictures
using the Up and Down navigation/arrow keys. Options are
+4 – -4.
Delay Pictures with the Self Timer
Self Timer lets you delay a picture long enough so you or the
person taking the picture can join others in the picture.
OK
2. Press Take
(
or
) to take the picture.
1. In camera mode, press the Options soft key. The following
Zoom in on a Subject
options appear in the display:
Your camera has digital zoom capabilities of up to x with
Resolution set to 480x640 and below.
8
•
•
•
•
•
Self Timer
Multi Shot
Quality
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal
result of digital enhancement.
Resolution
White Balance
77
•
•
Color Effects
Settings
•
On (3 pictures taken in succession).
3. Select the desired option. The Multi Shot icon
2. Highlight Self Timer. The following available values appear
(
) appears in the display.
in the display:
OK
The next time you press Take
(
or
), the camera
•
•
•
•
Off
takes several pictures in rapid succession.
2 Seconds
5 Seconds
10 Seconds
Quality
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
3. Select the desired delay. The camera screen appears in the
2. Highlight Quality. The following available values appear in
display.
the display:
OK
The next time you press Take
(
or
), a countdown
•
•
•
Fine
timer appears in the display that indicates the time
remaining before the camera takes the picture.
Normal
Economy
Multi Shot
3. Select the desired picture Quality value. The camera
Multi Shot lets you take multiple pictures in succession when you
applies the selected Quality value to your next picture.
OK
press Take
(
or
).
Resolution
1. In camera mode, press the Options soft key. The options
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
menu bar appears in the display.
2. Highlight Multi Shot. The following options appear in the
display:
•
Off
Multimedia
78
2. Highlight Resolution. The following available values
•
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
appear in the display:
3. Select one of the White Balance available values. The
camera applies the selected White Balance value to your
next picture.
• 960x1280
• 480x640
• 240x320
Color Effects
• 120x160
3. Select the desired Resolution value. The camera applies
the selected Resolution value to your next picture.
Color Effects lets you change your pictures from full-color to two-
color, (black plus a color you select).
1. In camera mode, press the Options soft key. The options
White Balance
menu bar appears in the display.
White Balance allows you to adjust picture quality according to
available light.
2. Highlight Color Effects. The following Color Effects
available values appear in the display:
1. In camera mode, press the Options soft key. The options
•
•
•
•
Normal (full-color)
Black&White (monochrome)
Sepia
menu bar appears in the display.
2. Highlight White Balance. The following White Balance
available values appear in the display:
Negative
•
Auto — The camera automatically adjusts picture quality to
available light.
• Green
3. Select the desired Color Efect. The camera applies the
selected Color Tone setting to your next picture.
•
•
Sunny — Use this setting when taking pictures in full sun.
Cloudy — Use this setting when taking pictures in cloudy
conditions.
•
Tungsten — Use this setting when taking pictures under
incandescent lights.
79
Camera Settings
2. Highlight Settings, then select Shutter Sound. The
following settings appear in the display:
Camera Settings (unlike other Camera Options) do not return to
their respective default values when you end the current Camera
session. Instead, Camera Settings apply to future Camera
sessions until you change individual Settings values or until you
use Reset Settings.
OK
•
Off — No Shutter Sound plays when you press Take
(
or
).
• Shutter
• OK
• Ding Dong
Memory
3. Select the desired Shutter Sound (each sound plays as it is
highlighted) setting. The camera applies the selected
Shutter Sound setting to your next picture.
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
2. Highlight Settings, then select Memory. The following
Reset Settings
Memory settings appear in the display:
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
• Phone — Stores pictures in phone memory.
• Card — Stores pictures on an optional microSD™ Memory Card.
3. Select the memory location of your choice. You’re returned
to the camera viewfinder screen.
2. Highlight Settings, then select Reset Settings. The following
options appear in the display:
•
•
Off — Keeps the current camera settings.
Shutter Sounds
On — Resets the camera settings to default values.
Choose from three different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken the picture.
3. Select the desired option.
Night Shot
1. In camera mode, press the Options soft key. The options
Night Shot lets you take pictures in low light without a flash.
menu bar appears in the display.
Multimedia
80
2. Highlight an image or photo. You have the following
Note: To avoid blurred pictures when taking Night Shots, hold your phone
OK
options:
very steady for two seconds after pressing Take
(
or
).
•
•
To take new photos, press the Camera soft key.
1. In camera mode, press the Options soft key. The options
OK
To expand the highlighted image to fill the screen, press VIEW
(
menu bar appears in the display.
or
).
2. Highlight Settings, then select Night Shot. The following
•
To access other options, press the Options soft key. The following
options appear in the display:
settings appear in the display:
–
information.)
•
•
Off
On
–
Set As — Lets you set the highlighted image as the Main Wallpaper
or as a Picture ID for one of your Contacts.
3. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
–
–
Rename — Change the file name for the highlighted image.
Using My Images Gallery
Copy — Copy images between phone memory and optional Memory
Card.
My Images lets you manage your photos and pictures you
download, and lets you choose the pictures that appear in your
phone’s display when you turn it on or off, while in standby mode
(wallpaper), and as image IDs for your contacts.
OK
–
Move — Transfer the highlighted image between phone memory and
optional Memory Card.
–
–
–
–
Lock Unlock — Block/permit erasure of the highlighted image.
/
Erase — Erase the highlighted image.
1. In standby mode, press
or
, then select
Erase All — Erase all unlocked images from My Images.
Multimedia ➔ My Images. A multiple-page matrix of
thumbnail views of saved photos and images appears in
the display.
Photo Info — Shows the image file’s name, date and time, resolution,
and size.
Select the desired option and a desired value.
81
3. To return to the previous menu, press or
. To return
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
to standby mode, press
.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
Using Your Music Player
Music Player lets you play MP3 and unprotected AAC, AAC+,
WMA music files, loaded onto an optional microSD™ Memory
Card using a personal computer. (For information on loading
• Genres — Lists music categories for music files on the Memory
Card and lets you play one or more music files of a particular music
category.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
3. Use the Navigation key or Arrow keys to highlight a music
Launching the Music Library Menu
file, then:
OK
1. In standby mode, press
or
, then select
•
•
•
To play the file, press the Play soft key.
Multimedia ➔ Music Player.
OK
To select the file for playing or other options, press MARK
(
).
– Or –
To select and apply any of the following options to the highlighted or
marked music file(s), press the Options soft key:
On the Music Player screen, press the Library soft key.
–
–
–
Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
2. The Library menu appears in the display showing the
following options:
Remove — Deletes highlighted or marked music file(s) from the
Memory Card.
• Now Playing — Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the Back
soft key) to return to the Music Player screen.
Properties — Lists the title, artist, album, genres, copyright
information, time length, file size, and bit rate of the highlighted music
file.
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
–
Player Settings — Lets you assign a particular Visualizer to
highlighted or marked music file(s).
Select the desired option.
Multimedia
82
Playing Music
Use the Navigation key to highlight a music file, then press the Play soft
key to play the file.
1. At the Multimedia menu, select Music Player. The Library
screen appears in the display, showing the following
options:
The Music Player screen appears in the display and the
selected music file/playlist begins playing.
Music Player Controls
• All
•
Volume key:
• Artists
–
–
To play a music file louder, press the
Volume key Up.
To play a music file softer, press the
Volume key Down.
• Albums
• Genres
• Playlists
•
Navigation key
:
2. Highlight the desired option,
–
–
–
–
–
To pause/resume playing a music file,
OK
press VIEW
(
), and then do
OK
press
.
one of the following:
To stop playing a music file, press the
Down navigation key.
To skip play to an earlier music file in the selected list, press the Left
navigation key.
To skip play to a later music file in the selected list, press the Right
navigation key.
To return to the selected list and choose another music file to play,
press the Up navigation key.
• All option — Highlight a music
file, then press the Play soft key
to play the file.
Tip: To play additional files, use the Left
and Right navigation keys, or highlight
and mark additional files for playback.
(For more information, see
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
• Other options — Use the Navigation key to highlight an Artist,
Album, Genre, or Playlist, then press VIEW
OK
(
).
83
–
–
Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, Repeat All, or Shuffle Repeat All.
Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
•
When the Memory Card icon (
the Memory Card from your phone. (For more information, see
) appears in the display, remove
2. Insert the Memory Card into a compatible card reader.
–
–
Remove — Deletes the selected music file from the Memory Card
Properties — Lists the title, artist, album, genre, copyright
information, time length, file size, and bit rate of the highlighted music
file.
Visualizer — Lets you change the Music Player visualization to Simple
View, Equalizer, Album Art, or Lyrics.
Note: Card readers vary. Follow the installation instructions included with
your card reader and personal computer.
3. Open the Memory Card reader drive and the “My_Music”
–
–
folder.
Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability amounts.
4. Drag or download music (MP3) files into the “My_Music”
folder.
Select the desired option to launch the option or to access the sub-
menu.
5. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for your
personal computer.
Loading Music Files
To transfer music to a microSD™ Memory Card, do the
following:
6. Insert the Memory Card into your phone. (For more
1. Before loading music files on a Memory Card, do the
following:
Using My Ringtones Gallery
•
With your phone powered off, insert the Memory Card into your
My Ringtones lets you assign ringtones for calls, alarms, and
other alerts.
OK
1. In standby mode, press
or
, then select
•
Power your phone on.
Multimedia ➔ My Ringtones. A list of ringtones appears
Multimedia 84
in the display.
2. When you select Record
New, the Record New
screen appears in the
display.
2. Highlight a ringtone. You have the following options:
•
To assign the highlighted ringtone to be used as a Ringtone, a
Contact ID, or an Alert Tone, press the Set As soft key.
OK
•
•
To hear the ringtone, press PLAY
(
or
).
•
To start recording a voice
OK
memo, press REC
(
or
To show title and file type for the highlighted ringtone, press the Info
).
soft key.
•
•
To pause/resume recording,
press the Pause soft key.
3. To return to the previous menu, press or
. To return
to standby mode, press
.
To stop recording and save the
Using My Sounds Gallery
OK
voice memo, press SAVE
(
or
).
3. When you highlight a saved voice memo file, you have the
My Sounds lets you record and manage voice memo files and
assign melodies as ringers or alerts.
following options:
OK
1. In standby mode, press
or
, then select
•
To erase the selected voice memo file, if it is unlocked, press the
Erase soft key.
Multimedia ➔ My Sounds.
The following options appear in the display:
OK
•
•
To listen to the voice memo, press PLAY
(
or
).
Press the Options soft key, and the following options appear in the
display:
•
•
Record New — Lets you record voice memos.
A list of recorded voice memo files and melodies.
–
information.)
–
–
Set As — assign the highlighted ringtone to be used as a Ringtone
Contact ID, or as the Alert Tone
Rename — Change the name of the voice memo file.
,
.
85
–
–
–
Lock Unlock — Block/permit erasure of the highlighted image.
/
Erase all — Erase all unlocked voice memos.
Sound Info — Shows the title, size, type, and date for the file.
4. When you highlight a melody file, you have the following
options:
OK
•
•
To hear the ringtone, press PLAY
(
or
).
Press the Options soft key to show the following options:
–
information.)
–
Set As — assign the highlighted ringtone to be used as a Ringtone
,
Contact ID, or as the Alert Tone
.
–
–
Erase all — Erase all unlocked melodies.
Sound Info — Shows the title, size, type, and date for the file.
5. To return to the previous menu, press or
to standby mode, press
. To return
.
Multimedia
86
Section 12: Tools
This section explains how you can use your phone’s Personal
Information Manager (PIM) functions to view today’s calendar,
schedule appointments, set an alarm, perform simple math
calculations, and more.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
Accessing Your Phone’s Tools
To launch the Tools menu:
OK
ᮣ
In standby mode, press
or
, then select Tools. The
To turn Bluetooth support on:
Tools menu appears in the display.
ᮣ
From the Tools menu, select Bluetooth ➔ Bluetooth
Bluetooth
Settings ➔ Enable.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
“Bluetooth set to on” and the black Bluetooth On icon
(
) appear in the display.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
To turn Bluetooth support off:
ᮣ
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings ➔ Disable.
“Bluetooth set to off” appears in the display and the and
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
the black Bluetooth On icon ( ) disappears.
87
OK
Add New Device
6. Press PAIR ( or
) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device.
To search for available Bluetooth devices:
1. From the Tools menu, select Bluetooth. The following
options appear in the display:
OK
7. Enter the device passkey or PIN and press
or
. Pop-
up messages appear to inform you that pairing with the
device is complete and prompting you to connect with the
device.
•
•
•
Add New Device
Registered List
Bluetooth Settings
2. Select Add New Device.
8. To connect with the device, press the Yes soft key. To
return to the Bluetooth menu without connecting to the
device, press the No soft key.
If Bluetooth is off, you are prompted to “Turn bluetooth
on?”. Press the Yes soft key to turn Bluetooth on.
Registered List
Note: To leave Bluetooth off and return to the Bluetooth sub menu, press the
No soft key.
This menu provides a list of
Bluetooth wireless technology
devices discovered by your handset.
“Place device you are connecting to in discoverable
mode” appears in the display.
ᮣ
From the Tools menu, select
Bluetooth ➔ Registered List.
A list of registered Bluetooth
devices appears in the display.
3. Place the Bluetooth device in discoverable mode. (See the
device user manual for more information.)
OK
4. Press OK
(
or
). Names of the available devices
appears in the display.
5. Use the navigation keys to highlight the device you want to
pair with your phone.
Tools
88
Connecting to a Bluetooth Device
Bluetooth Settings
1. From the Registered List, highlight the device and press
To access Bluetooth settings:
OK
or
.
ᮣ
From the Tools menu, select Bluetooth ➔ Bluetooth
Settings.
2. If you are unable to connect with the device a pop-up
appears in the display. Press the Yes soft key to retry.
The following options appear in the display:
Disconnecting from a Bluetooth Device
Enable/Disable
ᮣ
From the Registered List, highlight the device and press
Selecting this option turns Bluetooth on or off. (For more
the Off soft key.
Discovery Mode
Managing Your Registered List
Allows other users to see your accessibility. Select On for other
devices to see your device, or Off for no visibility.
1. From the Registered List, highlight a device and press the
Options soft key. The following options appear in the
display:
Device Name
Shows the handset name. You may change this name. Enter the
•
•
Remove Device — Deletes the device from the Registered List.
OK
text and press
or
.
Rename Device — Lets you change or replace the device name,
as needed.
Supported Profiles
•
Device Info — Shows the type of device, status, address, the date
when it was paired with your phone, and the date the device was
last connected with your phone.
Lists and describes the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
2. Select the desired option to access it.
89
•
To access other options while viewing the calendar, press the
Options soft key. The following options pop-up in the display:
Calendar
Calendar allows you to view the
current, past, or future month in
calendar format. While viewing the
calendar, the current date is
highlighted, and days with scheduled
events are surrounded by a box.
–
–
–
–
Go to Date — Lets you jump to any date you specify.
Go to Today — Lets you return to today from any other date.
Erase Old — Lets you erase past events.
Erase all — Lets you erase all events.
Select the desired option and perform the related process.
OK
3. Press VIEW ( or
) to
View an Event
display the specifics of the
highlighted event. The
following options are
available:
1. From the Tools menu, select
Calendar. A calendar appears in the display with the
current date highlighted. The month and year appear at the
top of the display.
•
To change the event details, press
more information.)
2. Use the following options and navigation keys to move
around within the calendar:
•
To move to an individual day, one day or one week at a time, press
the Navigation keys or Arrow keys.
•
•
To return to the Events list, press
OK
OK
(
or
).
•
•
•
•
To view previous months, press the Up volume key.
To view future months, press the Down volume key.
To add an event to the highlighted date, press the Add soft key.
OK
For more options, press the Options soft key. The following options
appear in the display:
–
–
Monthly — Returns you to the Monthly calendar display.
To call up a list of events on the highlighted date, press VIEW
(
Erase — Remove this event from the Calendar.
or
).
Select the desired option.
Tools
90
Add a New Event
4. To set the Start Date, use the keypad to enter the start
date for the event.
1. From the Tools menu, select Calendar.
5. To set the Start Time:
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
•
•
Use the keypad to enter the time for the event.
Use the Left and Right navigation keys to select AM or PM
.
6. Repeat Steps 4 and 5 for the End Date and End Time.
2. Press the Add soft key. The
New Event screen appears in
the display.
7. Use the Left and Right navigation keys or arrow keys to
select:
•
Use the Up and Down navigation
keys to highlight New Event
options.
•
•
Alert type (Tone, Vibrate, Light Only)
Alert tone (the Alert Tone screen appears in the display. See
•
•
Use the Left and Right navigation
keys to select option values.
•
•
Reminder
(
Off
15 Min. Before
5 Hours Before
10 Min. Before
,
Once
,
Every 2 Minutes
30 Min. Before
1 Day Before
,
Every 15 Minutes
1 Hour Before
On Time 5 Min.
)
Use the keypad to enter option
values.
Alert time
Hours Before
(
,
,
,
3
,
,
,
,
3. Enter the Name of the new event using the keypad.
Before
,
)
OK
8. Press SAVE
(
or
) to store the event in your calendar.
An alarm will notify you prior to the event, provided you set
Reminder to a value other than Off.
Note: The current mode of text entry is indicated in the lower left corner of
the display.
91
Review, Edit, and Erase Memos
Memo Pad
1. From the Tools menu, select Memo Pad. Your list of stored
memos appears in the display.
Create notes and store them in
Memo Pad. Notes that you create in
Return to Memo Pad anytime to
review and edit your notes.
2. Highlight the desired memo. You have the following
options:
Note: Memo Pad can’t be prioritized or
•
assigned an alert.
OK
•
To review the highlighted memo, press VIEW
(
or
).
Create a Memo
1. From the Tools menu, select Memo Pad.
While viewing a memo, you can do any of the following:
–
Change the text of the memo by pressing the Edit soft key and using
page 33.)
If you have any stored memos, they appear as a list in the
display.
OK
–
–
Return to the Memo Pad screen by pressing OK
(
or
).
2. If you don’t have any stored memos, press the Add soft
Press the Options soft key to Erase the memo you are viewing, Add a
New Memo, or Lock/Unlock the memo you are viewing.
key to add a memo.
•
For more options, press the Options soft key and the following
options appear in the display:
–
Edit— Change the text of the highlighted memo by using the keypad.
Tip: The current mode of text entry is indicated in the lower right corner of
–
–
–
Erase — Erase the highlighted memo.
the display.
Erase all — Erase all of the unlocked memos.
4. When you’re finished entering details for the memo, press
Lock Unlock — Prevents/allows erasure of the highlighted memo.
/
OK
OK
(
or
). The memo is stored.
3. Select the desired option.
Tools
92
4. To set the Time:
Alarm Clock
•
•
Enter the time for the alarm using the keypad.
Use the Left and Right navigation keys to select AM or PM
Your phone has three alarm clocks that can be set to go off once,
or to recur daily at a specific time. Once set, an alarm clock is
easy to change or turn off completely.
.
5. Use the Left and Right navigation/arrow keys to select the
Frequency at which you wish the alarm to occur (Daily,
Mon.-Fri., Weekends, or Once).
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed while the phone is off, the
alarm occurs at the specified time on the next day.
6. Use the navigation/arrow keys to select the Ringer type
(Tone, Vibrate, Light Only) and ringtone (from My
Ringtones or My Sounds).
1. From the Tools menu, select Alarm Clock. The following
options appear in the display:
•
•
•
Alarm 1
Alarm 2
Alarm 3
7. When you’re finished entering the time and frequency for
OK
the alarm, press SAVE
(
or
). If the alarm is set to On
and if Buetooth is disabled, the alarm icon (
in the top of the display.
) appears
2. Select the alarm clock you
wish to set. The selected Set
Alarm screen appears in the
display.
When an Alarm Sounds
An animated alarm clock appears in the display along with
Snooze and Dismiss options and an alert sounds when the
specified time for the alarm arrives.
Use the Up and Down
navigation keys to highlight
Set Alarm options.
•
To silence the alarm, use the Navigation key to highlight Snooze or
OK
Dismiss and press
.
•
If the alarm was set as a Daily alarm, the alarm icon remains in the top
of the display.
3. Use the Left and Right
navigation/arrow keys to set the alarm Off or On.
93
•
If the alarm was set as a Once only alarm, the alarm icon disappears
from the top of the display.
World Time
World Time lets you view the time of
day or night in any of the 24 different
time zones around the world.
Turn Off the Alarm
1. From the Tools menu, select Alarm Clock. The following
options appear in the display:
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
•
•
•
Alarm 1
Alarm 2
Alarm 3
1. From the Tools menu, select
World Time. A world map
appears in the display.
2. Highlight the desired alarm, then press the Options soft
key. The following options appear in the display:
•
•
•
On Off — Enables/disables the highlighted alarm without
/
2. Use the Left and Right navigation/arrow keys to browse
cities and their current times. The following cities are
supported.
changing the settings.
Reset Alarm — Disables the highlighted alarm and restores its
settings to default values.
EST/EDT :
New York
EST/EDT :
Montreal
EST/EDT :
Boston
Reset All — Disables all alarms and resets all alarm settings to
default values.
Caracas
Cape Verde
Rome
Brasilia
Mid Atlantic
Paris
3. Select the desired option.
London
Berlin
Athens
Helsinki
Baku
Jerusalem
Abu Dhabi
Bangkok
Moscow
Tashkent
Jakarta
Alma-ata
Tools
94
OK
3. To accept the highlighted setting, press
or
. If the
Hong Kong
Tokyo
Beijing
Seoul
DST icon ( ) appears in the display, it indicates that
Guam
Sydney
Samoa
Daylight Savings Time is enabled for the displayed time
zone.
Okhotsk
Midway
Wellington
HAST/HADT :
Honolulu
HAST/HADT :
Hawaii
Calculator
AKST/AKDT :
Alaska
PST/PDT :
Seattle
PST/PDT :
San Francisco
You can perform calculations, including addition, subtraction,
multiplication and division using your phone.
PST/PDT :
Los Angeles
MST/MDT :
Denver
MST/MDT :
Arizona
Note: You must use the phone keypad to use the Calculator.
CST/CDT :
Dallas
CST/CDT :
Chicago
CST/CDT :
Houston
1. From the Tools menu, select Calculator. The Calculator
appears in the display.
CST/CDT :
Mexico City
EST/EDT :
Detroit
EST/EDT :
Washington D.C
2. Enter the first number in your
calculation using the keypad.
(Numbers can be up to 9 digits
long, and can include a
3. Do one of the following:
•
To set the displayed time zone as the default time zone for your
phone, press
OK
or
.
•
To return to the Tools menu without changing the default time
zone, press or
decimal point followed by up
to 3 more digits.)
.
Enable Daylight Savings Time (DST)
1. Display the desired time zone.
•
To enter a decimal point, press
.
2. Press the Options soft key. DST Off / DST On pops-up in
•
To change the sign for a number
to a negative, press
.
the display.
95
•
•
To add parentheses [( )] to your calculation or to enter a Power
exponent (^), such as, 3^2, which is the equivalent of 32, press the
Operator soft key.
Stop Watch
You can use this function to set a
stop watch.
Press the Clear soft key) to clear current entries.
1. From the Tools menu, select
Stop Watch. The Stop Watch
screen appears in the display.
3. Use the Navigation keys (as shown in the Calculator
screen) to set the type of calculation that you wish to
perform. Your choices are as follows.
2. To start, stop, and resume the
•
•
•
•
[
[
[
[
+
x
] Addition
OK
stopwatch count, press
.
or
] Multiplication
-
] Subtraction
] Division
3. At the start of each succeeding event/lap, press the
Record soft key to record the completion time for the
previous event/lap. You can record up to eight event/lap
times.
÷
4. Use the keypad to enter the second number into your
equation.
OK
5. Press
to perform the calculation and view the result.
4. To reset the stop watch and to erase all stop watch (lap)
times recorded, press the Reset soft key.
Converter
The conversion menu provides the following conversion
categories:
•
•
•
Currency
Length
Weight
Tools
96
•
•
•
Volume
4. Enter the quantity you want converted in the From field.
Area
The converted quantity appears in the To field.
Temperature
Note: To include a decimal point, press the
key.
To convert a currency, length, weight, volume, area, or
temperature, do the following:
Currency — Reviewing/Editing Exchange Rates
1. From the Tools menu, select Converter. The following list
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
of converters appears in the display:
• Currency
• Length
1. From the Tools menu, select Converter ➔ Currency.
• Weight
2. Press the Rate soft key. The EXCHANGE RATE list appears
• Volume
in the display.
• Area
OK
3. Press EDIT ( or
). The EDIT EXCHANGE RATE list
• Temperature
2. Select the conversion feature
you wish to use.
appears in the display.
4. Highlight a currency whose
exchange rate you wish to
change.
3. Use the Navigation/Arrow keys
to select the units to be
5. Use the keypad keys to
change the selected exchange
rate value.
converted From and To.
97
OK
6. To save the changed exchange rate, press OK
(
or
).
3. Press the Add soft key. The
ADD EXCHANGE RATE screen
appears in the display with the
Base field highlighted.
The EXCHANGE RATE list appears in the display.
To discard the change, press the Cancel soft key.
7. To change any other exchange rates, repeat Steps 3 – 6.
4. Use the Left and Right
navigation/arrow keys to
select the Base currency to be
converted from.
8. To return to the Converter screen, press or
.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
5. Highlight the Currency field, and enter an identifier of up
to 5 characters for the new currency using either keypad.
1. From the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The EXCHANGE RATE list for the
6. Highlight the Exchange Rate field, and enter a decimal
From currency appears in the display.
exchange rate for the new currency using either keypad.
Note: Press the
key to enter the decimal point.
The Exchange Rate field only accepts up to five digits after the
decimal point.
OK
7. Press SAVE
(
or
) to save the new exchange rate.
Tools
98
Currency — Erasing Exchange Rates
Calculations are based on the total amount of the check, a
selected gratuity percentage, and the number of people paying.
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
1. From the Tools menu, select Tip Calculator. The Tip
Calculator screen appears in screen, with the Bill field
highlighted.
1. From the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The EXCHANGE RATE list for the
2. Use the keypad to enter the
From currency appears in the display.
total amount of the bill.
3. Use the Up and Down navigation keys to highlight the user-
3. If needed, highlight the Tip
field, and enter a tip
percentage.
added currency exchange rate to be erased.
4. Press the Erase soft key. You are prompted to confirm the
erasure.
4. If needed, highlight the #
Paying field, and enter the
number of persons paying.
Note: The Erase soft key is undefined for preloaded Exchange Rates. This
prevents you from erasing them.
5. The amount of the Tip, the final Total, and the amount Each
5. To erase the selected exchange rate, press the Yes soft
key. To keep selected exchange rate, press the No soft
key.
person should pay appear in the lower half of the screen.
Tip Calculator
Tip Calculator automatically calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
99
Section 13: Settings
This section explains how to configure your phone’s language,
network preferences, security options, and other settings.
Display Settings
Display settings let you change your phone’s menu appearance,
display brightness and contrast, and display content to better
meet your needs.
Accessing Your Phone’s Settings
To launch the Settings menu:
1. From the Settings menu, select Display Settings. The
OK
ᮣ
In standby mode, press
or
, then select Settings.
following menus appear in the display:
The Settings menu appears in the display.
• Menu Style — Lets you select whether the Main Menu appears as
an array of Icons or as a List of menu labels.
Location Setting
You can set your phone to pass Global Positioning System (GPS)
data to identify your location to the network continually or only
when you make an emergency (911) call.
•
•
Wallpaper — Choose the images that appear as background in
the Main display on your phone while in standby mode.
Clock Format — Choose whether the time and date appear in the
Main and Front displays on your phone in optional digital or analog
(clock face) style or in the default digital style.
Note: Check with your Wireless Carrier to determine if/when/where location-
based services are available.
•
•
•
Theme — Choose the color set used to show menus and screens
on your phone’s display.
1. From the Settings menu, select Location. The following
Dialing Font Size — Lets you select the size of the font used to
display digits you dial.
Location options appear in the display:
•
Location On — Your location data is continually sent wherever the
feature is available.
Banner — Lets you change or replace the text greeting that
appears in the display when your phone is in standby mode. Also
lets you enable/disable an ERI (Extended Roaming Indicator)
banner.
•
911 Only — Your location data is sent only when you dial 911.
2. Select the desired setting. The Settings menu appears in
your display.
Settings
100
•
Backlight — Set backlight options for the Main Display, Keypad,
3. Select the image you wish to use.
backlight Brightness, and Charging.
Clock Format
2. Select the desired sub-menu. The following sections
Lets you choose whether the time and date appear in the Main
display on your phone in optional digital or analog (clock face)
style or in the default digital style.
describe the Display sub-menus in greater detail.
Menu Style
1. From the Settings menu, select Display Settings
➔
Menu
1. From the Settings menu, select Display Settings ➔
Style. The following options appear:
Clock Format.
• Icon — Shows all main menus as an array of icons.
The following clock format options appear in the display:
• List — Shows main menus in scrollable list (text) format.
•
Digital — Time, date, and day of the week are shown using an
alternate, large digital format.
2. Select the desired Menu Style.
•
•
Analog — Time is shown using an analog clock face image.
Wallpaper
Off — Time, date, and day of the week are shown using the
default, small digital format.
Wallpaper lets you choose images that appear in the background
on your phone’s Main display while in standby mode.
2. Select the clock format that you wish to use.
1. From the Settings menu, select Display Settings ➔
Theme
Wallpaper. The following options appear:
Lets you select the colors used to show menus and screens in
the Main display.
•
My Images — Lets you select an image that you’ve downloaded
or a picture you’ve taken with the camera.
•
Preset Images — Lets you select an image that came preloaded
with your phone.
2. Select the image type you wish to use. A list of images
appears in the display.
101
1. From the Settings menu, select Display Settings ➔
1. From the Settings menu, select Display Settings ➔
Theme. The following options appear in the display:
Banner. The following sub-menus appear in the display:
•
•
Personal
ERI Banner
2. Select the desired banner.
•
If you select Personal, the Banner screen appears in the display
with the Enter Text field highlighted.
2. Use the Navigation/Arrow keys to show the desired color
– Enter a word or short phrase to appear in your phone’s display
theme (which appears in the preview screen), then press
OK
OK
(
or
) to save the displayed theme setting.
Dialing Font Size
Tip: Press and hold
to erase an existing banner, if necessary.
Lets you select the character size of your dialing font.
1. From the Settings menu, select Display Settings ➔
Dialing Font Size. The following options appear in the
display:
OK
Press OK
(
or
) to save your changes.
•
If you select ERI Banner, the following options appear in the
display:
–
–
On
Off
•
•
Normal
Large
Select the desired setting.
2. Select the desired dialing font size.
Backlight
Banner
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
Settings
102
Sound Settings
Note: Prolonged backlight use drains your battery faster.
Sound Settings let you customize your phone’s audio properties,
such as ringers, keypad tones, alerts, start up melody, and more.
1. From the Settings menu, select Display Settings ➔
Backlight.
Volume
The following sub-menus appear in the display:
Use the Volume sub-menu to set the default volume for call
ringers, message alerts, and alarms.
•
Main Display — Sets the time the internal display backlight
remains on after a period of inactivity. Optional settings are: 10
1. From the Settings menu, select Sound Settings ➔
seconds
,
15 seconds, 30 seconds, Always On, and Always
Volume. The following options appear in the display:
Off.
•
•
•
Voice Calls — Lets you set your phone’s Vocie Calls ringer to be
Off, to Vibrate, or to play a selected ringtone, melody, or sound at
Low – High/Vibrate volume.
•
•
Keypad — Sets the amount of time the keypad backlight remains
on after a period of inactivity. Optional settings are: 10 seconds 15
seconds 30 seconds Always On, and Always Off
,
,
,
.
Messages — Lets you set your phone’s New Messages ringer to
be Off, to Vibrate, or to play a selected ringtone, melody, or sound at
Low – High/Vibrate volume.
Brightness — Use the Left and Right navigation keys to select
between any of 5 optional settings.
• Charging — Use the Navigation key to select between On
(backlight does not go off while the battery is charging) and Off
(backlight does go off while the battery is charging).
Alarms — Lets you set your phone’s Alarms ringer to be Off, to
Vibrate, or to play a selected ringtone, melody, or sound at Low –
High/Vibrate volume.
2. Use the Up and Down navigation keys to highlight the
2. Select the desired option, then select the desired volume
level (Ringer Off, Low, Low/Medium, Medium, Medium/
High, or High) or vibrate mode (Vibrate, Vibrate/High).
OK
desired sub-menu and press the
key.
3. Use the navigation keys to change settings as desired in
OK
the selected sub-menu, and press the
selection.
key to save your
103
Ringer Type
Alerts
You can assign ring tones and melodies for calls, alarms, and
other alerts in the Ringer Type sub-menu.
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
1. From the Settings menu, select Sound Settings ➔
Ringer Type. The following ringer types appear in the
display:
1. From the Settings menu, select Sound Settings ➔
Alerts. The following alerts appear in the display:
•
•
•
•
Minute Beep — Sound an alert ten seconds before each elapsed
•
•
Voice Calls
Messages
minute of a call.
Roaming — Sound an alert when you leave your home service
area while on a call.
–
–
–
Text Message
Picture Message
Voicemail
Call Connect — Sound an alert when you connect/disconnect a
call.
•
Roam Ringer
Power On/Off — Play power on and power off melodies.
2. Select a ringer type. The following ringtone/sounds
2. Select the desired alert. The following options appear in
galleries appear in the display:
the display:
•
•
My Ringtones
My Sounds
• On
• Off
3. Select the desired gallery.
3. Select active (On) or inactive (Off) for the selected alert.
4. Select the desired ringtone, melody, or sound file.
Key Tone
Tip: To play each tone, melody, or sound file as you scroll through the list,
Lets you adjust the volume level and duration of the tones that
the keypad generates when you press the keys.
press the Play soft key.
Settings
104
1. From the Settings menu, select Sound Settings ➔ Key
Auto Answer
Tone. The following options appear in the display:
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
• Tone Level — Select the desired Keypad volume level (Off
,
Low,
Low/Medium Medium Medium/High, or High).
,
,
1. From the Settings menu, select Call Settings ➔ Auto
• Tone Length — Select the desired DTMF Tones length as Short or
Long
Answer. The following options appear in the display:
.
•
•
•
•
Off
2. Select the desired option and setting.
After 1 Second
After 3 Seconds
After 5 Seconds
Call Settings
The Call Settings sub-menu lets you set call options such as Auto
Retry, Data rates for data calls, and more.
2. Select the desired setting.
Call Answer
Auto Retry
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
Auto Retry automatically re-dials a number if there is no answer
or the dialed party is busy. Depending upon your location, the
number of times your phone redials a number may vary.
1. From the Settings menu, select Call Settings ➔ Call
Answer. The following call answer options appear in the
display:
1. From the Settings menu, select Call Settings ➔ Auto
Retry. The following options appear in the display:
•
•
•
•
Off
•
Any Key — Pressing any key except
,
, or
Every 10 Seconds
Every 30 Seconds
Every 60 Seconds
answers a call.
•
Send Key — Only pressing
answers a call.
2. Select the desired option.
2. Select the desired setting.
105
TTY Mode
•
TTY Off — Disables TTY mode.
Your phone is fully Teletypewriter (TTY)/Telecommunication
Device for the Deaf (TDD) compatible. You connect TTY/TDD
equipment to the headset connector on the top of your phone,
behind the folder hinge.
Note: The TTY Mode option has no effect on the phone’s earpiece,
microphone, or speaker. When you select TTY Full, all currently
enabled sound functions remain enabled.
3. Select the desired setting. If you select a setting other that
TTY Off, you’re returned to the previous menu and the TTY
Note: TTY Mode must be enabled (TTY Full selected) before you can use
your phone with TTY/TDD equipment.
icon (
) appears in the top of the display.
1. From the Settings menu, select Call Settings ➔ TTY
Mode. A message pops-up warning of possible headset
and non-TTY accessory performance impairment when in
TTY mode and prompting you to confirm that you want to
enable/disable TTY Mode.
Voice Privacy
Voice Privacy lets you choose what level of voice security
(Standard or Enhanced) your phone will use.
Tip: You can change your Voice Privacy setting during a call by using the In-
information.)
•
To confirm you want to view/change the TTY Mode setting, press
the Yes soft key.
1. From the Settings menu, select Call Settings ➔ Voice
•
To keep the current TTY Mode setting, press the No soft key.
Privacy. The following options appear in the display:
2. The following options appear in the display:
•
•
Standard
Enhanced
•
•
•
TTY Full — Enables TTY mode while letting you hear and speak
with the other party.
2. Select the desired setting.
TTY + Talk — Enables TTY mode while letting you speak with the
other party.
TTY + Hear — Enables TTY mode while letting you hear the other
party.
Settings
106
Data Settings
•
On — Disables the radio transmitter and receiver and the
Bluetooth interface in your phone.
Use the Data Settings sub-menu to set your phone to detect
data connections automatically.
Tip: If you need to make an emergency call with Airplane mode enabled, just
dial the emergency number and press
.
1. From the Settings menu, select Call Settings ➔ Data
Settings. The following options appear in the display:
•
Off — Enables the radio transmitter and receiver in your phone.
to return to the Phone Settings menu.
•
•
Data Off — Your phone ignores data connections.
Data For Next Call — Your phone accepts data connection for the
next call.
Note: Press
•
Data Until Powered Off — Your phone accepts data connections
until you turn off your phone.
2. Select the desired setting. You are prompted to confirm
your setting change.
2. Select the desired setting.
3. To change to the new setting, press the Yes soft key. You
Phone Settings
Airplane Mode
are returned to standby mode.
To discard the change and keep the original setting, press
the No soft key. The Airplane Mode screen remains in the
display.
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from making or receiving calls, but
allows you to use other features (such as the camera and the
Tools) safely in sensitive environments, such as on board an
aircraft.
Language
The Language option changes the language of menus, sub-
menus, and other user-interface features.
1. From the Settings menu, select Phone Settings ➔
Airplane Mode. The following options appear in the
display:
1. From the Settings menu, select Phone Settings ➔
Language.
107
The following options appear in the display:
2. Enter the four-digit lock code using the keypad.
•
•
English
Español
Note: The default lock code is the last four digits of your mobile phone
number.
2. Select your language preference.
The “Enter Code” prompt disappears and the Security
Security
menu appears in the display.
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
3. Select Lock Phone. The following options appear in the
display:
•
Lock — The phone locks immediately and stays locked until you
enter the lock code.
Lock Phone
Locking the phone blocks all outgoing calls except those to 911
and to the three user-programmed emergency numbers. You can
lock the phone manually, or set the phone to lock automatically
when turned on. In Lock mode, you can answer calls, but you
must unlock the phone to place calls (except to emergency and
secret numbers).
•
•
Unlock — The phone remains unlocked.
On Power Up — The phone locks automatically the next time your
phone is powered on and stays locked until you enter the lock code.
4. Select the Lock Phone option of your choice.
Change Lock
The default lock code is generally the last four digits of your
phone number. It is advisable to change the default lock code to a
secret code for security purposes.
Important!: If you change the NAM1 setting after setting the phone to lock
upon power-up and did not program a number into NAM2, you
won’t be able to access your phone. You must call the Service
Center to unlock your phone.
1. From the Settings menu, select Phone Settings ➔
1. From the Settings menu, select Phone Settings ➔
Security.
Security.
The “Enter Code” prompt appears in the display.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Settings
108
Note: The default lock code is the last four digits of your mobile phone
Important!: Because of various transmission methods, network parameters,
and user settings used to complete a call from your wireless
phone, a connection cannot always be guaranteed. Therefore,
emergency calling may not be available on all wireless networks
at all times.
number.
3. Select Change Lock.
The “New Lock Code” prompt appears in the display.
Important!: DO NOT depend on this phone as a primary method of calling
4. Enter the New Lock Code. You’re prompted to re-enter the
911 or for essential or emergency calls.
New Lock Code for verification.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
5. Enter the new lock code again. Your changes are stored.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
Note: When you dial an emergency number, you phone locks itself to the
emergency location that answered the call and locks itself in 911-Only
mode, blocking from dialing any number but an emergency number.
Emergency #
Store Emergency Numbers
You have the option of storing up to three emergency numbers to
your phone. Each number can be up to 32 digits in length. All
emergency numbers can be dialed any time, even when your
phone is locked or restricted.
1. From the Settings menu, select Phone Settings ➔
Security.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Note: The default lock code is the last four digits of your mobile phone
number.
109
The “Enter Code” prompt disappears and the Security
1. From the Settings menu, select Phone Settings ➔
menu appears in the display.
Security.
3. Select Emergency #.
The “Enter Code” prompt appears in the display.
4. Select one of the three emergency numbers.
2. Enter the four-digit lock code using the keypad.
5. Enter the emergency number (up to 32 digits in length).
Note: The default lock code is the last four digits of your mobile phone
number.
OK
6. To save the number that you entered, press OK
(
or
).
The “Enter Code” prompt disappears and the Security
7. To discard your entry and return to the previous menu,
menu appears in the display.
press the Cancel soft key.
3. Select Reset Phone. A prompt appears in the display to
restore default settings (except for Contacts).
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number using
either keypad.
4. To reset your phone to factory default settings, press the
Yes soft key.
2. Press
to place the call.
To keep the current settings, press the No soft key.
Reset Phone
Erase All Entries
Reset Phone returns all setup parameters (except for the
Contacts entries) to their factory default values.
Erase All Entries deletes all entries from the Contacts list.
1. From the Settings menu, select Phone Settings ➔
Security.
Caution!: Before selecting Reset Phone, contact your Wireless Carrier. Invoking
Reset Phone may erase settings made by your Wireless Carrier from
your phone, resulting in loss of service.
The “Enter Code” prompt appears in the display.
2. Enter the four-digit lock code using the keypad.
Settings
110
3. Select Restriction. The following options appear in the
Note: The default lock code is the last four digits of your mobile phone
display:
number.
• Outgoing — Restrict/allow outgoing calls.
• Incoming — Restrict/allow incoming calls.
The “Enter Code” prompt disappears and the Security
menu appears in the display.
• Contacts — Restrict/allow access to your Contacts list.
4. Select the desired option and select the desired setting [On
(restricted) / Off (unrestricted)].
3. Select Erase All Entries.
The “Erase all entries?” prompt appears in the display.
4. To reset your Contacts list, press the Yes soft key.
To keep the current Contacts entries, press the No soft key.
Restriction
Note: The default restriction settings are all Off.
NAM Selection
NAM Selection allows you to set your preferred system. Contact
your wireless carrier for more information.
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed by/to your Contacts.
1. From the Settings menu, select Phone Settings ➔ NAM
1. From the Settings menu, select Phone Settings ➔
Selection.
Security.
The following NAM options appear in the display:
The “Enter Code” prompt appears in the display.
•
•
NAM 1 — Your service contract has one phone number.
2. Enter the four-digit lock code using the keypad.
NAM 2 — Your service contract has two phone numbers.
2. Select the desired setting. The phone automatically
Note: The default lock code is the last four digits of your mobile phone
number.
restarts.
The “Enter Code” prompt disappears and the Security
menu appears in the display.
111
System Select
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
The System Select feature enables you to automatically or
manually select the network used when roaming outside of your
home area.
With Airplane Mode set to On, the Set Time feature is enabled.
1. From the Settings menu, select Phone Settings ➔ Set
1. From the Settings menu, select Phone Settings ➔
Time. The following options appear in the display:
System Select.
•
•
Set Time
Set Date
The following roaming options appear in the display:
•
MetroPCS only — Roaming is OFF. If your home system is not
available then your call will not be connected, and the no service
2. Select Set Time. The Set Time screen appears in the
icon (
) appears in the display. In some service areas, an
display.
operator may come on-line and ask you how you would prefer to
pay for the call.
3. Enter the current time using your keypad:
•
Automatic — Roaming is ON. It will always try your calls using the
Preferred Roaming List (PRL) loaded into your phone. If a preferred
service is not found, then this option will attempt to acquire any
digital service.
•
The hour and minute must be entered using two digits each. You
must enter the hour in 12-hour format.
•
Use the Left and Right navigation keys to select am or pm.
OK
4. Press OK
(
or
) to save the time. The following
2. Select the desired Roam setting.
options appear in the display:
The Phone Settings menu appears in the display.
•
•
Set Time
Set Date
Set Time
Use the Set Time option to set the current time and date.
5. Select Set Date. The Set Date screen appears in the
display.
Settings
112
6. Enter the current date using your keypad:
2. Press the Up navigation key. The Contacts Find screen
appears in the display with the first matching contact
name in a list highlighted.
•
•
The month and day must be entered using two digits each.
The year must be entered with all four digits.
OK
7. Press OK
(
or
) to save the date.
3. Highlight the desired Contact and press
to call the
contact.
Quick Search
Searching for a Menu Item
Quick Search is an easy way to locate contacts in your Address
Book and Menu items.
1. In standby mode, press the first few numeric keys that
1. From the Settings menu, select Phone Settings ➔ Quick
correspond to the letters of the Menu item name.
Search.
For example, to search for “Inbox” you would enter
The following options appear in the display:
•
•
On
Off
I
N
B
O
X
2. Select the desired option.
2. Press the Down navigation key. The Menu List screen
appears in the display with the first matching menu item in
a list highlighted.
Searching for a Contact
1. In standby mode, press the first few numeric keys that
correspond to the letters of the contact’s name.
3. Select the desired menu item.
For example, to search for “Sally” you would enter
PC Connection
PC Connection lets you allow or block PC connections to your
phone, using an optional USB Data Cable.
S
A
L
L
Y
113
1. From the Settings menu, select Phone Settings ➔
PC Connection. The following settings appear in the
display:
Turn the screen backlight on by pressing any key.
2. Press the Unlock soft key. “Press * to unlock keys” pops-up
in the display.
• USB Mass Storage — Your phone appears as a removable disk
drive to your PC, allowing you to transfer files (such as, music or
text files) to and from your phone.
3. Press
.
Memory Info
Memory Info shows the amount of phone memory that is
available and used, and details the distribution of the used
memory.
• No Connection — Blocks connection and file transfers with a PC.
2. Select the desired setting.
Auto Key Lock
Save Options
With Auto Key Lock set to On, your phone automatically disables
its keys when the screen backlight goes out with the phone
closed.
1. From the Settings menu, select Memory Info ➔
Save Options ➔ Images. The following options appear in
the display:
1. From the Settings menu, select Phone Settings ➔
Auto Key Lock. The following settings appear in the
display:
• Phone Memory — Stores pictures taken with your phone’s
camera in the phone’s memory.
• Card Memory — Stores pictures taken with your phone’s camera
in an optional microSD™ Memory Card.
•
•
On
Off
2. Select the desired setting.
2. Select the desired option.
Phone Memory
1. From the Settings menu, select Memory Info ➔
Phone Memory.
To unlock the keys:
1. Open the QWERTY keypad,
– Or –
Settings
114
The following options appear in the display:
•
•
Mark individual files by highlighting each file, then pressing MARK
OK
(
or
); or mark all files by pressing the Mark All soft key.
•
Memory Usage — Shows Total phone memory, total memory
Available, and memory quantities used to store Images, Ringtones,
Sounds, Applications, and Picture messages.
Press the Done soft key. You are prompted to confirm the
erasure(s)/move(s).
–
–
To erase/move/copy the selected file(s), press the Yes soft key.
•
My Images — Lists the photos stored in the My Images folder.
Lets you copy photos to an optional Memory Card or lets you make
used memory available by erasing unwanted photos or by moving
photos to an optional Memory Card.
To keep the selected file(s), press the No soft key.
Card Memory
1. From the Settings menu, select Memory Info ➔
Card Memory. The following options appear in the display:
•
•
My Ringtones — Lists the downloaded ringtones stored in the My
Ringtones folder. Lets you make used memory available by erasing
unwanted recorded sounds.
•
Memory Usage — Shows Total phone memory, total memory
Available, and memory quantities used to store Images and Music.
My Sounds — Lists the recorded sounds stored in the My Sounds
folder. Lets you make used memory available by erasing unwanted
recorded sounds.
•
My Images — Lists the photos stored in the My Images folder.
Lets you copy photos to phone memory or lets you make used card
memory available by erasing unwanted photos or by moving photos
to phone memory.
2. Select the desired option.
3. To delete/move selected photos, downloaded ringtones, or
•
•
My Music — Lists the downloaded Music files stored in the My
Music folder. Lets you make used card memory available by
erasing unwanted Music files.
recorded sounds:
•
•
Select My Images
If you select My Images, press the Options soft key, then select
Erase Move, or Copy. The selected Erase or Move/Copy (to an
,
My Ringtones, or My Sounds.
Format Card — Erases the current contents of the optional
Memory Card (if any) and replaces it with a set of folders needed by
your phone.
,
optional Memory Card) screen appears in the display.
– Or –
Note: This option prepares new, unformatted microSD™ Memory Cards for
use with your phone. Repeated formatting of a Memory Card can
shorten its service life. Erase files rather that format the Memory Card.
If you select My Ringtones or My Sounds, press the Erase soft key.
The associated Erase screen appears in the display.
115
2. Select the desired option.
3. To format the Memory Card, press the Yes soft key.
3. To delete/move selected photos or downloaded ringtones:
4. To return to the Card Memory menu without formating the
Memory Card, press the No soft key.
•
•
Select My Images or My Music
If you select My Images, press the Options soft key, then select
Erase Move, or Copy. The selected Erase or Move/Copy (to phone
.
Phone Info
,
Phone Info lets you identify the hardware and software versions
of your phone and to identify the phone number assigned to your
phone.
memory) screen appears in the display.
– Or –
If you select My Music, press the Erase soft key. The Erase Music
screen appears in the display.
Phone Number
•
•
Mark individual files by highlighting each file, then pressing MARK
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Carrier.
OK
(
or
); or mark all files by pressing the Mark All soft key.
Press the Done soft key. You are prompted to confirm the
erasure(s)/move(s).
1. From the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Carrier appears in the display.
–
–
To erase/move/copy the selected file(s), press the Yes soft key.
To keep the selected file(s), press the No soft key.
Formatting a Memory Card
OK
2. Press OK
(
or
) to return to the Phone Info menu.
1. Insert an optional microSD™ Memory Card into your
Icon Glossary
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
2. From the Settings menu, select Memory Info ➔ Card
Memory ➔ Format Card. You are prompted to confirm that
you want to format the Memory Card.
1. From the Settings menu, select Phone Info ➔ Icon
Glossary.
Settings
116
OK
A list of the icons that can appear on the top line of the
display shows in the display.
2. Press the OK
(
or
) key to return to the Phone Info
menu.
OK
2. Press OK
(
or
) to return to the Phone Info menu.
Version
You can view the PRL (Preferred Roaming List), ERI (Extended
Roaming Indicator), software version, Browser version, @metro
version, and hardware version on your phone. This feature is
helpful if you need to contact Customer Service.
1. From the Settings menu, select Phone Info ➔ Version.
Hardware and software information for your phone
appears in the display.
OK
2. Press the OK
(
or
) key to return to the Phone Info
menu.
MEID
Lists the MEID number for your phone in decimal (MEID Dec) and
hexadecimal (MEID Hex) formats.
1. From the Settings menu, select Phone Info ➔ Version.
MEID Dec and MEID Hex numbers for your phone appear in
the display.
117
Section 14: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
118
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.42 W/Kg.
Body-worn: 0.998 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
119
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
120
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
121
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
122
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
123
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
124
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
National Radiation Protection Board (UK):
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
125
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
126
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
127
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
You can obtain additional information on this subject from the
following sources:
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
200 Independence Ave., SW
Washington, DC 20201
Voice: (800) 222-2336
Voice: 1-800-35-NIOSH (1-800-356-4647)
Email: [email protected]
Internet: http://www.audiology.org
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information
128
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
129
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
T3
+
T2
=
5
M3
+
M2
=
5
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
Health and Safety Information
130
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Vehicles
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Emergency Calls
Switch your phone off in any facility where posted notices require
you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
131
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Health and Safety Information
132
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
133
Maintaining Your Phone's Peak Performance
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Battery Standby and Talk Time
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
Battery Precautions
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Health and Safety Information
134
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
135
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
136
Section 15: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
137
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
138
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
139
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Warranty Information
140
Index
Disabled 51
Expired 52
Removing 51
Restoring 52
Call Settings
Calls
Incoming 27
Missed 28
Outgoing 27
Symbols
@metro 50
Settings 50
Numerics
B
A
Backlight 102
Banner 102
Battery 4
Charging 5
Removal 5
C
Calculator 95
Calendar
Adding a New Contacts Entry
Adjust
Alarm Clock
Alarm clock
Alerts 104
Apps
Buying 51
141
Camera
Options 77
Screen 76
Shortcuts 77
Taking Pictures 75
Canned Message Text
Clear Key 14
Contacts 37
Adding 39
Deleting 49
Editing 41
Finding 38
Groups 46
Metro411 49
Opening 37
G
D
Display 100
Display Settings
Backlight 102
Gallery
Image 81
Voicemail 7
H
Banner 102
Theme 101
Wallpaper 101
E
Emergency 109
HAC 129
Memory Info 49
142
I
Icons
L
Language 107
M
Memory Info Settings
Message Folder
Inbox 59
Outbox 60
Voice 64
Voicemail 64
Message folder
outbox 60
Message Folders
Messages
Mobile Shop
Mode
Camera 19
Input 16
Lock 17
Silent 18
Standby 17
Talk 17
Vibrate 18
M-Ratings 130
Multimedia 75
N
MEID 117
Memory Card
Formatting 116
Install 7
Managment 115
Remove 8
Creating 53
Metro411 49
metroWeb
143
Receiving 58
Pictures
Brightness 77
Quality 78
Security Settings
Restriction 111
Settings
Backlight 102
O
Outbox, Reviewing Messages 61
Outgoing 27
P
Phone Info
Q
R
Restriction 111
S
MEID 117
Phone Settings
Language 107
Security 108
Banner 102
Language 107
Theme 101
Picture Message Settings 66
Picture Messages
144
Volume 103
Wallpaper 101
Settings Menu
Accessing 100
Silent Mode
Entering 18
Exiting 18
Sound Settings
Changing 33
Text Modes
Editing an Existing Contacts
Entry 41
Metro411 49
Changing 33
Theme 101
Tools 87
Calculator 95
Volume 103
Calendar 90
Tools Menu
Accessing 87
V
T
Version 117
T-Ratings 130
U
145
147
|