Samsung SGH Z540 User Manual

SGH-Z540

User’s Guide

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger.

Use only Samsung-approved batteries and

accessories, such as headsets and PC data cables.

Use of any unauthorised accessories could damage

you or your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

At very high volumes, prolonged listening to a

headset can damage your hearing.

Use only in the normal position (held to the ear).

Avoid unnecessary contact with the antenna when

the phone is switched on.

Qualified service

Emergency calls

Only qualified service personnel may repair your

phone.

Key in the emergency number for your present

location, then press

For more detailed safety information, see "Health

and safety information" on page 79.

Keep your phone away from small children

Keep the phone and all its parts, including

accessories, out of the reach of small children.

About this Guide

•

Your phone is capable of operating

in a 3G environment, allowing

much greater data transfer speed,

video streaming, and video

conferencing.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Indicates that you need to pay careful

attention to the subsequent

information regarding safety or phone

features.

Special

features of your phone

ꢀ

Indicates that you can get more

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

information on the referenced page.

→

Indicates that you need to press the

Navigation keys to scroll to the

specified option and then select it.

[

]

Indicates a key on the phone. For

•

Media player

example,

[

]

Play media files on your phone. You

can enjoy high quality videos and

music.

< >

Indicates a soft key, whose function is

displayed on the phone screen. For

example, <Contacts

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, and audio.

•

Bluetooth

•

E-mail

Send photos, images, videos, and

other personal data, and connect to

other devices using free, wireless

Bluetooth technology.

Send and receive e-mails with images, video,

and audio attachments.

•

Java

Enjoy Java™-based embedded

games and download new games.

Web browser

Access the wireless web to get

up-to-the-minute information and

a wide variety of media content.

•

Organiser

Keep track of your daily, weekly,

and monthly schedule.

•

Get personal with photo caller

See who’s calling you with their

very own photo displays.

•

Voice recorder

Record memos or sounds.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

View me ssag e s .............................................. 20

Use Bluetooth wireless.................................... 20

Contents

Unpack

Enter text

Make sure you have each item

ABC, T9, Number, and Symbol modes

Your phone

Call functions

Keys, features, and locations

Advanced calling features

Get started

Menu functions

First steps to operating your phone

All menu options listed

Install and charge the phone.............................. 7

Power on or off ................................................ 8

Keys and display .............................................. 9

Access menu functions.................................... 11

Customise your phone..................................... 12

Make/Answer calls.......................................... 14

Solve problems

Help and personal needs

Health and safety information

Index

Step outside the phone

Begin with your camera, games, the web, and other

special features

Use camera ................................................... 15

Play media files.............................................. 16

Browse the web.............................................. 16

Use Contacts ................................................. 17

Send messages.............................................. 18

Overview of menu functions

To access Menu mode, press [Centre] in Idle mode.

4 Internet

ꢀ

p. 38

7 Organiser

ꢀp. 58

1 Call log

ꢀp. 28

1 Go to homepage

2 Enter URL

3 Favourites

4 History

5 Browser settings

6 Network settings

ꢀ

p. 38

p. 39

p. 40

1 Alarms

2 Calendar

3 Week view

4 Today’s events

5 Schedule

6 Anniversary

7 Task

8 Memo

9 Missed event alarm

0 Memory status

ꢀ

p. 58

p. 59

p. 61

p. 62

1 Missed calls

2 Dialled calls

3 Received calls

4 Current contacts

5 Delete all

ꢀ

p. 28

p. 29

6 Data calls

7 Calls cost^*

8 Calls time

5 Messages

ꢀp. 40

1 Create new

2 Inbox

3 Drafts

ꢀp. 40

ꢀp. 44

ꢀp. 45

ꢀp. 46

ꢀp. 47

ꢀp. 48

ꢀp. 49

ꢀp. 52

2 Contacts

ꢀp. 30

1 Search contact

2 New contact

3 Groups

4 Speed dial

5 My name card

6 Copy all

ꢀp. 30

ꢀp. 31

ꢀp. 32

ꢀp. 33

8 Camera

ꢀp. 62

4 Outbox

5 Sent box

6 Email inbox

7 Media Album^**

8 Templates

9 Broadcast

0 Delete all

* Settings

9 Settings

ꢀp. 66

1 Profiles

2 Time & date

3 Phone

4 Display

5 Call

6 Connectivity

7 Application settings

8 Security

9 Memory status

0 Operator settings

* Reset settings

ꢀ

p. 66

p. 67

p. 68

p. 69

p. 71

p. 75

p. 77

7 Own number

8 Service number

9 Settings

0 Memory status

# Memory status

6 File manager

ꢀp. 53

3 Applications

ꢀp. 33

1 SAT^*

Images

Videos

Music

Sounds

Games & More

Other files

ꢀp. 53

ꢀp. 54

ꢀp. 55

ꢀp. 56

ꢀp. 57

ꢀp. 58

ꢀp. 33

ꢀp. 35

ꢀp. 37

ꢀp. 38

2 Media player

3 Voice recorder

4 World clock

5 Calculator

6 Converter

* Shows only if supported by your USIM/SIM

card.

** Shows only if supported by your service

provider.

Unpack

Your phone

Make sure you have each item

Keys, features, and locations

Exterior

camera lens

Travel Adapter

Phone

Headset jack

Camera key

Earpiece

External

display

Music player

control keys

Battery

PC Data Cable

User’s Guide

Main

display

External

speaker

Interior

camera lens

Menu access/

confirm key

(Centre)

Navigation

keys

PC Link CD

Right soft key

Video call key

Power On/Off/

Menu exit key

Left soft key

Volume keys

You can obtain various accessories

from your local Samsung dealer.

Application

switch key

Dial key

The items supplied with your

phone and the accessories at

your Samsung dealer may vary,

depending on your country or

service provider.

Delete key

Alphanumeric

keys

Microphone

Special

function keys

Get started

First steps to operating your phone

Install the battery.

Replace the battery

cover.

USIM/SIM card information

When you subscribe to a cellular network, you

receive a plug-in SIM (Subscriber Identity Module)

card loaded with your subscription details, such as

your PIN, and available optional services. For 3G

services, you can purchase a USIM (Universal

Subscriber Identity Module) card.

Plug the travel adapter into the phone.

Install and charge the phone

Remove the battery

cover.

Insert the USIM/SIM

card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

If the phone is already

on, first turn it off by

pressing and holding

Make sure that the gold-

coloured contacts on the

card are face down.

[

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [ ] to turn

on the phone.

Do not turn on the

phone when

mobile phone use

is prohibited.

Low battery indicator

3. If necessary, enter the PIN

and press <Confirm>.

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

Switch off

1. Open the phone.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

2. Press and hold [ ].

Keys and display

Keys

Enter numbers, letters, and some

special characters.

In Idle mode, press and hold [

access your voicemail. Press and hold

] to enter an international call prefix.

1] to

Perform the function indicated on the

bottom line of the display.

In Idle mode, access menu options

Enter special characters.

directly.

ꢀp. 68

Press and hold [ ] to activate or

deactivate the Silent profile. Press and

hold [ ] to enter a pause between

numbers.

In Menu mode, scroll through the

menu options.

In Idle mode, access Menu mode.

In Menu mode, select a highlighted

menu option or confirm input.

Adjust the phone volume.

In Idle mode, with the phone open,

adjust the keypad tone volume. With

the phone closed, press and hold to

turn on the display.

Open the application switch window to

open Call Messages, and Internet

without exiting the current application.

Make a video call.

Press and hold to turn on the camera.

In Camera mode, switch the camera

lens.

Make or answer a call.

In Idle mode, retrieve numbers

recently dialled, missed, or received.

Press and hold to launch or close the

music player.

Delete characters from the display or

an item in an application.

Return to the previous file during

playback.

Press and hold to switch the phone on

and off.

Skip to the next file during playback.

End a call.

In Menu mode, cancel input and return

the phone to Idle mode.

Get started

Display

Layout

Video call in progress

The display has three areas.

Out of your service area; you

cannot send or receive video

calls

Icons

displays various icons.

Text and graphics

displays messages,

instructions, and

Bluetooth active; When

transferring data, this icon

information you enter.

blinks red and blue.ꢀp. 72

Soft key function

indicators

Connected with a computer

via a USB port

Msg.

Contacts

shows the current

functions assigned to

the two soft keys.

Browsing the Internet on a

PC using the phone as a

modem

Icons^*

Received signal strength

Connected to a secured web

page

Accessing services in a 2.5G

network; when transferring

data, this icon animates.

New message:

Accessing services in a 3G

network; when transferring

data, this icon animates.

•

: SMS

: MMS

: E-mail

: Voicemail

: WAP push

: Configuration

message

Roaming network

Voice call in progress

Out of your service area; you

cannot send or receive voice

calls

Access menu functions

Inbox full:

•

: SMS

: MMS

: E-mail

: Voicemail

: Configuration

message

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

display indicates their current

role.

Select

Back

Profile settingꢀp. 67

•

: Normal

: Meeting

: Car

: Silent

: Outdoor

Battery power level

* Depending on your country or service provider, the icons

shown on the display may vary.

Press the left soft

key to select the

highlighted option.

Press the right soft

key to return to

the previous menu

level.

Get started

Customise your phone

Select an

option

1. Press a desired soft key.

2. Press the Navigation keys to

move to the next or previous

option.

1. In Idle mode, press [Centre]

and select Settings Phone

Language Screen text

Display

language

→

2. Select a language.

3. Press <Select> or [Centre]

to confirm the function

displayed or option

3. Press <Save>.

highlighted.

You can change the call ringer by

changing the properties of the

currently active sound profile.

Call ringer

melody

4. To exit, choose either of the

following methods:

To change the profile properties:

1. In Idle mode, press [Centre]

•

Press <Back> to move

up one level.

Press [ ] to return to

Idle mode.

•

and select Settings

Profiles

→

2. Scroll to the sound profile you

are using.

Use shortcuts Press the number key

corresponding to the option you

want.

3. Press <Options> and select

Edit

4. Select Voice call ringtone

and select a ringtone for

voice calls.

5. Select Video call ringtone

and select a ringtone for

video calls.

6. Press <Options> and select

Save

To change the sound profile:

For Wallpaper, press

Change> and select an

1. In Idle mode, press [Centre]

image. If necessary, select

the portion of the image to be

displayed and press [Centre].

and select Settings

Profiles

→

2. Select the profile you want.

4. Press <Change>.

You can set wallpaper for the idle

screen on each display.

Idle mode

Wallpaper

You can set the Navigation keys

to function as shortcuts to access

your favourite menus.

shortcuts

For the main display:

1. In Idle mode, press [Centre]

and select Settings

Display Wallpaper

2. Scroll to an image folder

→

and select Settings

Phone Shortcuts

2. Select a key.

→

3. Select an image.

3. Select a menu to be assigned

to the key.

For the external display:

1. In Idle mode, press [Centre]

and select Settings

Display Cover LCD

2. Select an image type.

→

You can quickly activate the

Silent profile to avoid disturbing

other people.

→

Silent profile

3. For Clock, scroll to a clock

Press and hold [ ] in Idle mode.

type and press <Save>.

For Cover title, enter a

greeting and press <Save>.

Get started

Make/Answer calls

You can protect the phone

against unauthorised use with a

phone password. The phone will

require the password on power-

up.

Phone lock

To make a voice call:

Make a call

1. Enter an area code and

phone number.

2. Press [ ].

1. In Idle mode, press [Centre]

and select Settings

Security Change phone

password

→

3. To end the call, press [ ].

To make a video call:

→

1. Enter an area code and

phone number.

2. Enter the default password,

00000000, and press

2. Press [ ] and if the other

phone is compatible, the

other person appears on the

screen.

<Confirm>.

3. Enter a new 4- to 8-digit

password and press

<Confirm>.

4. Enter the new password

1. When the phone is ringing,

press [ ].

Answer a call

again and press <Confirm>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

Confirm>.

2. For a video call, press

<Show me> to allow the

other person to see you.

3. To end the call, press [ ].

Press [

Adjust the

volume during

a call

Step outside the phone

Begin with your camera, games, the web, and other

special features

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

Use camera

3. Press [ ] to switch between

the interior lens and exterior

lens.

1. In Idle mode, press and hold

Take a photo

[

] to turn on the camera.

4. Press [Centre] to start

recording.

2. Press [ ] to switch between

the interior lens and exterior

lens.

5. Press [Centre] to stop

recording. The video is

automatically saved.

3. Aim the lens at the subject

and make any desired

adjustments.

6. Press [Centre] to record

another video.

4. Press [Centre] to take a

photo. The photo is saved

automatically.

1. In Idle mode, press [Centre]

Play a video

and select File manager

Videos

→

5. Press [Centre] to take

another photo.

2. Select the video you want

from the Videos folder.

1. In Idle mode, press [Centre]

View a photo

and select File manager

Images

→

2. Select the photo you want

from the Pictures folder.

Step outside the phone

Play media files

1. From the play list screen,

press [Centre].

Play media files

Use these methods:

Copy media

files to the

phone

2. During playback, use the

following keys:

•

Download from the wireless

web p. 38

ꢀ

•

Centre: pauses or

•

Download from a computer

using the optional Samsung

resumes playback.

Up: opens the play list.

Left: returns to the

previous file. Moves

backward in a file when

held down.

•

PC StudioꢀSamsung PC

Studio User’s Guide

•

Receive via Bluetooth

ꢀ

p. 71

•

Right: skips to the next

file. Skips forward in a file

when held down.

1. In Idle mode, press [Centre]

and select Applications

Media player

2. Press [Centre].

3. Press <Options> and select

Add Folder or Files

Create a play

list

→

•

: adjusts the volume.

Down: stops playback.

→

Browse the web

4. Scroll to a media folder by

pressing [Left] or [Right].

Using a built-in web browser, you can easily access

the wireless web to get a variety of up-to-date

services and information and to download web

content.

5. Check the files you want or

scroll to the folder you want.

6. Press <Add> or <Select>.

In Idle mode, press [Centre] and

Launch the

browser

select Internet

homepage

→

Go to

•

To scroll through browser

items, press [Up] or [Down].

To the USIM/SIM card:

Navigate the

web

1. In Idle mode, enter a phone

number.

To select an item, press

<Select> or [Centre].

2. Press <Options> and select

To return to the previous

page, press <Back> or [C].

Save to Contacts

New

→

SIM

→

To access options, press

3. Specify contact information:

Name, Phone number, Group

(for USIM), and Location

number.

<Options>.

Use Contacts

4. Press <Save> to save the

To the phone’s memory:

Add a contact

contact.

1. In Idle mode, enter a phone

number.

1. In Idle mode, press

Find a contact

2. Press <Options> and select

<Contacts>.

Save to Contacts

→

Phone

2. Enter the first few letters of

the name you want.

→

New a number type.

→

3. Specify contact information:

First name, Last name, Phone

number, Work Email, Home

Email, Group, Homepage,

Birthday, and More

3. Select an entry.

4. Select a number, and press

[

] to dial or [Centre] to edit

contact information.

information (Job title,

Department, Company,

Nickname, and Notes).

4. Press <Options> and select

Save to save the contact.

Step outside the phone

1. In Idle mode, press <Msg.

and select Create new

Multimedia message

2. Enter the message subject.

3. Select Text

1. In Idle mode, press [Centre]

and select Contacts My

name card

Create and

send your

name card

Send a

→

multimedia

message

(MMS)

2. Specify your contact

information.

3. Press <Options> and select

4. Enter the message text and

press [Centre].

Save to save the name card.

4. To send the name card,

access the My name card

menu again.

5. Select Picture or Video or

Audio

6. Add an image, video clip, or

sound clip.

5. Press <Options> and select

Send name card

→

7. Press <Options> and select

sending method.

Send

8. Enter destination numbers or

e-mail addresses.

Send messages

1. In Idle mode, press <Msg.

and select Create new

Text message

9. Press [Centre] to send the

message.

Send a text

message (SMS)

→

2. Enter the message text and

press [Centre].

3. Enter destination numbers.

4. Press [Centre] to send the

message.

1. In Idle mode, press <Msg.

and select Create new

File messenger

Send an e-mail

Send files by

MMS

and select Create new

2. Enter the e-mail subject.

→

2. Enter the message subject.

3. Move to the Message field.

4. Enter the message text.

3. Move to the Message field.

4. Enter the e-mail text.

5. Move to the Attach files line.

6. Press <Options> and select

Add files

Add name card,

Add files

Add name card,

or Add v-calendar

7. Select images, videos,

sounds, name cards,

7. Select images, videos,

sounds, name cards,

schedule items, or tasks.

8. Press <Options> and select

Attach

8. Press <Options> and select

Attach

9. Press [Centre].

10.Enter e-mail addresses.

10.Enter destination numbers or

e-mail addresses.

11.Press [Centre] to send the

e-mail.

11.Press [Centre] to send the

message.

Step outside the phone

View messages

1. In Idle mode, press <Msg.

View an e-mail

and select Email inbox

When a notification appears:

View a text

message

2. Press <Options> and select

Download to download new

e-mails or headers.

1. Press <View>.

2. Select the message from the

Inbox.

3. Select an e-mail or header.

From the Inbox:

4. If you selected a header,

press <Options> and select

Retrieve to view the body of

the e-mail.

1. In Idle mode, press <Msg.

and select Inbox

2. Select a text message (

Use Bluetooth wireless

When a notification appears:

View a

Your phone is equipped with Bluetooth technology,

enabling you to connect the phone wirelessly to

other Bluetooth devices and exchange data with

them, talk hands-free, or control the phone

remotely.

multimedia

message

1. Press <View>.

2. Select the message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Msg.

and select Inbox

2. Select an MMS message

1. In Idle mode, press [Centre]

Turn on

Bluetooth

and select Settings

→

Connectivity

Activation

→

Bluetooth

(

→

2. Select My phone’s visibility

On to allow other devices

to find your phone.

→

1. In Idle mode, press [Centre]

and select Settings

To receive data via Bluetooth,

your phone’s Bluetooth feature

must be active.

Search for and

pair with a

Bluetooth

device

Receive data

→

Connectivity

My devices

new device

2. Select a device.

→

Bluetooth

→ Search

→

If necessary, press <Yes> to

confirm that you are willing to

receive.

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN,

if it has, and press <OK>.

4. When the owner of the other

device enters the same code,

the pairing is complete.

1. Access an application,

Send data

Contacts

Calendar

Task

File manager

Schedule, or

2. Select the item you want to

send.

3. Press <Options> and select

Send name card

schedule Send task

Via bluetooth

4. Select a device.

5. If necessary, enter the

Bluetooth PIN and press

OK>.

Send

/Send

→

2. Enter the whole word before editing or deleting

characters.

Enter text

3. When the word displays correctly, go to step 4.

ABC, T9, Number, and Symbol modes

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

You can enter text in some features such as

Messages, Contacts, or Organiser, using ABC mode,

T9 mode, Number mode, and Symbol mode.

4. Press [ ] to insert a space and enter the next

word.

Changing the text input mode

Other T9 mode operations

The text input mode indicator displays when the

cursor is in a text input field.

•

Press [1] to enter periods or apostrophes

automatically.

•

Press and hold [ ] to switch between T9 (

and ABC ( ) modes.

Press [ ] to change case or to switch to Number

mode ( ).

Press and hold [ ] to switch to Symbol mode

)

•

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

C] to clear the entire display.

Adding a new word to the T9 dictionary

(

This feature may not be available for some

languages.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your

key presses. When there are no more alternative

words, Spell displays on the bottom line.

Entering a word in T9 mode

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

3. Press <Spell>.

4. Enter the word you want using ABC mode and

5], [5], and [6] to

press <Add>.

T9 predicts the word that you are typing, and it

may change with each key that you press.

Using ABC mode

Using Number mode

Press the appropriate key until the character you

want appears on the screen.

Number mode enables you to enter numbers. Press

the keys corresponding to the digits you want.

Characters in order displayed

Key

Using Symbol mode

Upper case

Lower case

Symbol mode enables you to insert symbols.

Press

display more symbols

select a symbol

[Up] or [Down].

the corresponding

number key.

clear the symbol(s)

insert the symbol(s)

[

OK>.

(creating an SMS message with GSM alphabet encoding)

Other ABC mode operations

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the

cursor to move to the right automatically or

press [Right]. Then, enter the next letter.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

C] to clear the entire display.

Making a call from Contacts

Call functions

Advanced calling features

Once you have stored a number in Contacts, you can

dial the number by selecting it from Contacts.

ꢀp. 30

Making a call

1. In Idle mode, enter the area code and phone

number.

You can also use the speed dial feature to assign

your most frequently called numbers to specific

number keys.ꢀp. 32

• Press [

] to clear the last digit or press and

You can quickly dial a number from the USIM/SIM

card using its location number assigned when

stored.

hold [C

] to clear the whole display. You can

move the cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause

between numbers.

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

2. Scroll through other numbers, if necessary.

2. Press [ ].

3. Press <Call> or [ ] to make a voice call, or

3. When you want to end the call, press [ ].

<V-Call> to make a video call.

Making an international call

1. In Idle mode, press and hold [

]. The

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

character appears.

2. Enter the country code, area code, and phone

number, then press [ ].

Press <Accept> or [ ] to answer the call.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

Tips for answering a call

•

When Anykey answer is active, you can press

any key to answer a call, except for <Reject

and [ ]. p. 68

When Active folder is active, you can answer a

call by opening the phone. p. 68

Press <Reject> or [ ] to reject a call.

2. Scroll to the number you want and press [ ].

ꢀ

•

ꢀ

•

Press and hold [

ringer, depending on the Volume key setting.

p. 68

] to reject a call or mute the

Options during a call

You can access a number of functions during a call.

ꢀ

Adjusting the volume during a call

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

Use [

call.

] to adjust the earpiece volume during a

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Placing a call on hold/Retrieving

Press <Hold> or <Unhold> to place the call on

hold or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Making a second call

You can make another call if your network supports

this function.

Connect the headset to the jack on the right side of

the phone. The button on the headset works as

follows:

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

4. Press <Options> and select Drop

→

Drop held

redial the last call

answer a call

end a call

the button twice.

the button.

call to end the call on hold.

5. To end the current call, press [ ].

the button and hold.

Answering a second call

You can answer an incoming call while already on

the phone, if your network supports this function

and you have activated the call waiting feature.

ꢀp. 70

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Call functions

2. Press <Swap> to switch between the calls.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

3. Press <Options> and select Drop

→

Drop held

call to end the call on hold.

Mute/Unmute: switch off the phone's

microphone so that the other person on the

phone cannot hear you, or switch it back on.

4. To end the current call, press [ ].

Using In-call options

Press <Options> to access the following options

during a call:

Mute key tone/Unmute key tone: turn the

key tones off or on.

•

Loudspeaker

Speakerphone feature or switch back to Normal

mode.

Loudspeaker off: turn on the

To communicate with answering machines or

computerised telephone systems, Unmute

key tone must be selected.

Switch to headset

the call to a Bluetooth headset or hands-free car

kit or back to the phone. p. 72

/Switch to phone: switch

•

New call: make a new voice call.

Contacts: locate or store contacts in Contacts.

ꢀ

Send text message: create a new SMS

message.

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

•

Send DTMF: send DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Split: have a private conversation with one

multi-party call participant. The other

participants can converse with each other. After

the private conversation, select Join to return

both private participants to the multi-party call.

•

Drop: access the following options:

•

Memo: create a memo.

Drop call: disconnect one of the multi-party call

participants.

End call/End calls: disconnect the call currently

on hold, active call, or all calls.

Drop active call: disconnect the active call.

Drop held call: disconnect the call currently on

hold.

•

Mute voice/Unmute voice: turn the

microphone off or on.

Using the video call feature

In a 3G (UMTS) service area, your phone can make

or receive a video call, allowing you to see another

person on the screen during a conversation. The

other person’s phone must support the video call

feature.

Mute camera & voice/Unmute all: turn the

camera and the microphone off or on.

Mute key tone Unmute key tone: turn off or

on the key tones.

Zoom: display the zoom control bar and zoom in

or out by pressing [Up] or [Down].

Making a video call

1. In Idle mode, enter the area code and phone

number.

Brightness: display the brightness control bar

and adjust the brightness by pressing [Left] or

[Right].

2. Press [ ] and if their phone is compatible, the

other person appears on the screen.

•

Effects: change the colour tone of the image.

Answering a video call

Hide information/Show information: hide or

display information about the video call.

When you receive a video call, answer as you would

when as receiving a voice call. Press <Show me

to allow the caller to see you.

•

Send DTMF: send DTMF (Dual tone multi-

frequency) tones as a group after entering the

entire number you need to send or retrieving a

number from Contacts.

Using video call options

During a video call, press <Options> to access the

following options:

•

Video quality: change the image quality of the

camera.

•

Loudspeaker/Loudspeaker off: turn on the

speakerphone feature or switch back to Normal

mode.

End call: end the video call.

Switch to headset

the call to a Bluetooth headset or hands-free car

kit or back to the phone. p. 72

Mute camera Unmute camera: turn the

camera off or on.

/Switch to phone: switch

ꢀ

•

Save to Contacts: save the number to

Contacts.

Menu functions

All menu options listed

Send message: send a message to the selected

number via SMS, MMS, or file messenger.

•

Delete: delete the call log.

Call log (Menu 1)

Delete all: delete all logs.

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls. You can

also check the cost of your calls, if your USIM/SIM

card supports this function.

Dialled calls (Menu 1.2)

This menu displays the most recent calls you have

dialled.

To access this menu, press [Centre] in Idle mode

Received calls (Menu 1.3)

and select Call log

This menu displays the most recent calls you have

received.

Missed calls (Menu 1.1)

This menu displays the most recently received calls

that you did not answer.

Current contacts (Menu 1.4)

This menu displays all of the calls you have dialled,

received, or missed.

Accessing a call log

1. Scroll to the name or number you want.

2. Press [ ] to dial the number, or [Centre] to

view the details of a call.

Delete all (Menu 1.5)

Use this menu to delete all logs in each call type.

1. Press [Centre] to check the call types to clear.

2. Press <Delete>.

Using call log options

From the call list, press <Options> to access the

following options:

3. Press <Yes> to confirm the deletion.

•

Details: access the call details.

4. If your phone is locked, enter the phone

Voice call: make a voice call to the number.

password and press <Confirm>.

Video call: make a video call to the number, if

the 3G service is available.

The password is preset to 00000000. You can

change this password.

ꢀp. 76

•

Use number: paste the selected number to the

normal dialling screen.

Data calls (Menu 1.6)

Calls time (Menu 1.8)

Use this menu to view the total amount of sent or

received data.

This menu displays the time log for voice and video

calls made and received. The actual time invoiced by

your service provider will vary.

To reset a counter or all counters, press <Options

•

Total dialled: check the total length of voice

calls dialled.

and select Reset or Reset all

If the phone is locked, it will require the phone

password. The password is preset to 00000000

Total received: check the total length of

voice calls received.

You can change this password.

ꢀp. 76

Total dialled: check the total length of video

calls dialled.

Calls cost (Menu 1.7)

Total received: check the total length of

video calls received.

This network feature displays the cost of calls. This

menu is available only if your USIM/SIM card

supports this feature. Note that this is not intended

to be used for billing purposes.

To reset a counter or all counters, press <Options

and select Reset or Reset all.

•

Total costs: check the total cost of all your

calls. If the total cost exceeds the maximum cost

set in Edit cost limit, you must reset the

counter before you make another call.

If the phone is locked, it will require the phone

password. The password is preset to 00000000

You can change this password.ꢀp. 76

•

Last call cost: check the cost of your last call.

Max cost: check the maximum cost set.

Press <Options> to access the following options:

•

Reset call cost: reset the cost counters.

Edit cost limit: set the maximum cost

authorised for your calls.

•

Setup currency: set the currency that is

applied when the cost of your call is calculated.

Menu functions

Msg. alert tone: select a ringtone to alert you

to an incoming message from the number.

Contacts (Menu 2)

You can store phone numbers on your USIM/SIM

card and in your phone’s memory. The USIM/SIM

card and phone’s memory are physically separate,

but they are used as a single entity called Contacts.

•

Add to speed dial: set the selected number as

a speed dial entry.

Video call: make a video call, if the 3G service

is available.

To access this menu, press [Centre] in Idle mode

Copy to SIM/Copy to phone: copy the contact

from the phone’s memory to the SIM card, or

vice versa.

and select Contacts

Search contact (Menu 2.1)

•

Send name card: send the contact via SMS,

e-mail, file messenger, or Bluetooth.

Use this menu to search for numbers in Contacts.

Finding a contact

1. Enter the first few letters of the name that you

want to find.

Use number: paste the selected number to the

normal dialling screen.

Delete: delete the contact.

2. Select the name you want from the list.

While viewing the contact list, press <Options> to

access the following options:

3. Press [ ] to dial the number, or [Centre] to edit

contact information.

•

Details: access information about the selected

Using contact options

contact.

•

Edit: edit contact information.

While viewing contact details, press <Options> to

access the following options:

Video call: make a video call, if the 3G service

is available.

•

Edit: edit contact information.

•

New: add a new contact.

Send message: send a message to the selected

number via SMS, MMS, file messenger, or e-mail.

Delete: delete the contact.

•

Special options: set the following options:

Search groups: access the caller group list.

Picture: assign a caller ID image to alert you to

a call from the number.

Service number: access service numbers

preset by your service provider.

Ringtone: assign a ringtone to alert you to a call

from the number.

•

Delete all: delete all contacts.

•

Mark video call: set the selected number as

a video call number.

New contact (Menu 2.2)

Use this menu to add a new contact to Contacts.

4. Press [Centre] to save the contact.

Adding a contact to the phone’s memory

Adding a contact to the USIM/SIM card

1. Select SIM

1. Select Phone

2. Change the settings or enter information about

the contact:

2. Enter information about the contact:

•

Name: assign a name.

•

First name/Last name: assign a name.

Phone number: enter a phone number.

Group: (For USIM) assign a caller group.

Location number: assign a location

number.

Phone number: add a phone number.

Work Email: assign a business e-mail

address.

•

Home Email: assign a personal e-mail

address.

3. If you are using a USIM card, press <Options

to add additional information:

•

Group: assign a caller group.

Homepage: enter a homepage address.

Birthday: enter the person’s birthday.

More information: enter the job title,

department, company, nickname, and

additional note of the person.

•

Add item: add a number type to the contact.

Delete item: remove the selected type from

the contact.

4. Press <Save> to save the contact.

Groups (Menu 2.3)

3. Press <Options> and access the following

options to add additional information:

Use this menu to organise your contacts in caller

groups.

•

Special options: assign a caller ID image,

call ringer, or message ringer for the contact.

Add phone number: add a number type to

the contact.

Delete phone number: remove the

selected number type from the contact entry.

Change type: change the number type from

the contact entry.

Adding members to a caller group

1. Select a group.

2. Press [Centre] to check the contacts you want.

3. Press <Save>.

Menu functions

•

Video call: make a video call, if the 3G service

is available.

Managing caller groups

From the group list, press <Options> to access the

following options:

•

Change: assign a different number to a key.

Remove: clear the speed dial setting for a key.

•

View members: display the members of the

selected group.

Dialling speed dial numbers

Add member: add contacts to the selected

group, if the group does not have any.

In Idle mode, press and hold the appropriate key.

•

Add group: add a new group.

My name card (Menu 2.5)

Rename group: change the group name.

Delete group: delete the selected group.

Use this menu to create your name card and send it

to other people.

Delete all groups: delete all groups including

default groups.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a number in the phone’s

Speed dial (Menu 2.4)

memory.

ꢀp. 31

Use this menu to assign speed dial numbers (2 to 9)

to 8 of your most frequently called numbers.

Using name card options

After saving your name card, press <Options> to

access the following options:

Assigning speed dial entries

1. Select a key location from

9. Key

•

Edit: edit the name card.

reserved for your voicemail server.

Send name card: send the name card via SMS,

e-mail, file messenger, or Bluetooth.

2. Select the contact you want from the contact list.

3. Select a number.

•

Delete: delete the name card.

Managing speed dial entries

Copy all (Menu 2.6)

From the Speed dial screen, press <Options> to

access the following options:

Use this menu to copy all of the contacts stored on

the USIM/SIM card to the phone’s memory, or vice

versa.

•

Add: assign a number to an unassigned key.

Details: check the name and number assigned

to a key.

Own number (Menu 2.7)

Applications (Menu 3)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes

made here do not affect the actual subscriber

numbers on your USIM/SIM card.

Use this menu to play media files, to record a voice

memo, to set time zone, or to use the phone as a

calculator or converter.

To access this menu, press [Centre] in Idle mode

and select Applications

Service number (Menu 2.8)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your

USIM/SIM card supports SDN.

SAT (Menu 3.1)

This menu is available if you use a USIM/SIM card

that supports SIM Application Toolkit menus and

provides additional services, such as news, weather,

sports, entertainment, and location services.

Available services may vary, depending on your

service provider’s plans.

1. Scroll to the number you want.

2. Press <Call> or [ ].

For details, see your USIM/SIM card instructions or

contact your service provider.

Settings (Menu 2.9)

Use this menu to change the default settings for

Contacts entries.

Media player (Menu 3.2)

•

Viewing settings: change the sort order of the

contact list.

You can enjoy music and video files from the phone’s

memory. First, you need to save files to your

phone’s memory.

•

Default storage settings: select a default

memory location for saving contacts. If you

select Optionally, the phone will ask you to

select a memory location each time you save a

number.

Downloading or receiving music or video

files

You can play the following types of files on your

phone:

Memory status (Menu 2.0)

•

Music: MP3, AAC, AAC

Video: MP4, H.263, 3GP

Use this menu to check the number of contacts you

have stored in the phone’s memory and on the

USIM/SIM card.

Menu functions

Use the following methods to save music or video

files to your phone’s memory:

Keys

Function

Right

Skips to the next file. Skips forward in a

file when held down.

•

Download from the wireless web

Download from a computer using Samsung PC

Studio Samsung PC Studio User’s Guide

Receive via an active Bluetooth connection

p. 71

ꢀp. 38

Opens the play list.

Adjusts the volume.

Stops playback.

ꢀ

•

ꢀ

Down

Creating the play list

Using media player options

Add the media files to the play list so you can play

them.

While playing a file, press <Options> to access the

following options:

1. From the Media player screen, press [Centre].

•

Pause/Resume: pause or resume playback.

2. Press <Options> and select Add

Stop: stop playback.

3. Select Folder or Files

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

selected file to the online media album, if

provided.

4. Scroll to a media folder by pressing [Left] or

[Right].

5. Select the files you want or scroll to the folder

you want.

•

Open play list: access the play list.

6. Press <Add> or <Select>.

Activate key: get a new license key when the

key for the selected DRM file expires.

Playing media files

1. From the Media player screen, press [Centre].

2. Select a file. The file plays.

•

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

During playback, use the following keys:

•

Go to File Manager: go to the Downloads

Keys

Function

folder in Music

Centre Pauses or resumes playback.

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Left

Return to the previous file. Moves

backward in a file when held down.

•

Visible to Bluetooth: share the file with other

Bluetooth devices.

•

Copy: make a copy of the selected file in the

current play list or another play list.

Show controller/Hide controller: display or

New list: add a new play list.

hide the controller image.

Playing music files with the phone closed

•

Details: access the file properties.

Press and hold [ ] to launch the media player and

start playback. Use the following keys to control the

media player:

Player settings: change the default settings for

playing media files:

Play options: select a repeat mode.

Volume: select a volume level.

Key

Function

Pauses or resumes playback. Closes the

media player when held down.

Controller: display or hide the controller image.

Audio player skin: select a skin image.

Returns to the previous file. Moves

backward in a file when held down.

•

VOD settings: select a connection profile to be

used for accessing a video streaming server. You

can also create or edit a profile.

ꢀp. 74

Skips to the next file. Skips forward in a

file when held down.

Key management: manage license keys you

have acquired.

Adjusts the volume.

Using play list options

Locks the exposed keys when held down

to keep accidental presses from affecting

playback.

From the media player screen, press [Up] to access

the play list and press <Options> to access the

following options:

•

Play: play the currently selected file.

Voice recorder (Menu 3.3)

Add: add files or a folder to the play list.

Use this menu to record voice memos. A voice

memo can be up to one hour long.

Remove: remove the selected file or all files

from the current play list.

Recording a voice memo

1. Press [Centre] to start recording.

•

Move: move the selected file to the position you

want within the current play list or another play

list.

2. Speak into the microphone.

Press [Centre] to pause or resume the recording.

Menu functions

3. Press <Stop> or [Down]. The voice memo is

•

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online medial album, if provided.

automatically saved.

4. Press [Centre] to review the memo, or [Up] to

record additional memos.

•

Activate key: get a new license key when the

key for the selected DRM file expires.

Playing a voice memo

1. From the voice recorder screen, press

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

<Options> and select Go to sounds.

2. Select a voice memo from the Voice memos

•

Go to sounds: access the voice memo list.

Delete: delete the file.

folder. The selected memo plays.

During playback, use the following keys:

Rename: change the file name.

keys

Centre

Left

Function

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Pauses or resumes playback.

Moves backward in a file.

Skips forward in a file.

Adjusts the volume.

Stops playback.

•

Visible to Bluetooth: share the file with other

Bluetooth devices.

Right

•

Details: access the file properties.

Record settings: customise the default settings

for the voice recorder:

Down

Default name: change the default prefix of file

names.

Switches to Review mode (

to Record mode ( ).

)

or back

Recording time: select a maximum recording

time.

Using voice recorder options

•

Key management: manage license keys you

have acquired.

After playback, press <Options> to access the

following options:

•

Play: play the selected voice memo in Review

mode.

Record: record a new voice memo.

World clock (Menu 3.4)

Calculator (Menu 3.5)

Use this menu to set your local time zone and find

out what time it is in another part of the world.

Use this menu to perform basic arithmetic functions

such as addition, subtraction, multiplication, and

division.

Setting the local time zone

Performing a calculation

1. Enter the first number.

1. From the world map, press [Left] or [Right] to

scroll to the city you want on the upper line ( ).

As the time line moves, the time and date of the

given zone display.

Press [ ] to include a decimal point.

2. Enter the operation for your calculation by

pressing the Navigation keys.

2. Press [Centre] to save the time zone.

3. Enter the second number.

Viewing world time

1. From the world map, move to the lower line

4. Press [Centre] to view the result.

(

Using calculator options

2. Press [Left] or [Right] to scroll to the city you

want.

Press <Options> to access the following options:

•

Equal: view the result.

3. Press [Centre] to save the time zone.

Recent calculation: display the last result you

calculated.

Applying daylight savings time

1. From the world map, press <Options> and

•

Save to memory: save a value into the

calculator memory.

select Summer time

2. Press [Centre] to check the time zones you want.

3. Press <Select>.

•

Recall memory: retrieve the saved value.

Clear memory: clear the saved values.

4. Press [Centre].

Menu functions

Converter (Menu 3.6)

Internet (Menu 4)

Use this menu for common conversions, such as

currency and temperature.

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the web browser, you can access up-to-the-

minute information and a wide variety of media

contents, such as wallpapers, ringtones, and music

files.

Performing a conversion

1. Select the converter type you want.

2. Press [Left] or [Right] to select the original unit

and press [Down].

To access this menu, press [Centre] in Idle mode

3. Enter the value to be converted and press

[Down].

and select Internet

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to

above zero (+) or below zero (-).

Go to homepage (Menu 4.1)

You can launch the web browser and access the

homepage of the web service provided by your

service provider.

4. Press [Left] or [Right] to select the unit you want

to convert to.

Navigating the web browser

The equivalent value for the amount you entered

displays.

Press

scroll through browser

items

[Up] or [Down].

Using converter options

Press <Options> to access the following options:

select a browser item

[Centre] or <Select>.

•

Clear: clear the current values.

Reverse: reverse the conversion.

return to the previous

page

<Back> or <C>.

Currency rates: display the currency rate list.

Using browser menu options

From any web page, press <Options> to access the

following browser options:

•

Go to homepage: go back to the homepage.

Enter URL: manually enter the URL address of

the web page you want to access.

•

Reload: reload the current page with updated

information.

About...: access version and copyright

information about the browser.

Add favourite: add the current page to your

bookmark list.

Exiting the web browser

Press [ ] to end the network connection and exit

the browser.

•

Favourites: access the bookmark list.

History: show URLs previously visited.

Enter URL (Menu 4.2)

Send link: send the URL via SMS, e-mail, or file

messenger.

Use this menu to manually enter a URL address and

access the associated web page.

•

Save: save the image of the current web page or

the current page.

Favourites (Menu 4.3)

Advanced: clear browser information and

access the browser settings:

Search text: search for a specific word or

phrase from the current web page.

Clear history: delete the URLs stored in the

history.

Use this menu to save URL address in order to

quickly access web pages, or access the preset

bookmarks.

Adding a bookmark

1. Press <Options> and select New

→

Favourite.

Clear cookies: delete cookies. Cookies are

pieces of personal information sent to a web

server while navigating the web.

2. Enter a URL and press [Centre].

3. Enter a name for the item and press <OK>.

4. Press <Options> and select OK

Clear cache: clear the cache. The cache is a

temporary memory site that stores recently

accessed web pages.

Using bookmark options

From the Favourites screen, press <Options> to

access the following options:

Details: access the page properties.

•

Select: access the page of the selected

bookmark.

Browser settings: change the settings for

browser display, security, and certificates.

•

Details: access the bookmark details.

Network settings: select a connection profile

to be used for connecting to the Internet. You

Send link: send the bookmark via SMS, e-mail,

or file messenger.

can also create or edit a profile.

ꢀp. 74

Menu functions

•

Open: open the selected bookmark folder.

Messages (Menu 5)

Rename: change the name of the bookmark

folder.

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use Push message, Voice mail, Cell

broadcast message, and Configuration message

features.

•

New: add a new bookmark or folder.

Edit: edit the selected bookmark.

Move: move the selected bookmark to another

bookmark folder.

To access this menu, press [Centre] in Idle mode

and select Messages

•

Delete: delete the selected bookmark or all

bookmarks.

Create new (Menu 5.1)

History (Menu 4.4)

Use this menu to create and send text messages,

multimedia messages, or e-mails. You can also send

files using MMS.

You can access the list of pages you have accessed

recently.

Select a URL from the list to access the

corresponding web page.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages.

Browser settings (Menu 4.5)

Creating and sending an SMS message

Use this menu to change the settings for browser

display, security, and certificates.

1. Enter your message and press [Centre].

• The maximum number of characters

allowed in a short message varies by

service provider. If your message exceeds

the maximum number of characters, the

phone will split the message.

Network settings (Menu 4.6)

Use this menu to select a connection profile to be

used for connecting to the Internet. You can also

create or edit a profile.ꢀp. 74

• You can use various message composing

options by pressing <Options> in each

field.ꢀnext section

2. Enter a destination number.

3. Enter the message text and press [Centre].

To send the message to more than one recipient,

fill in additional destination fields.

4. Select the Picture or Video line and add an

image or video clip.

3. Press [Centre] to send the message.

• The maximum size allowed for a message

can differ, depending on your service

provider.

Using options while composing an SMS

message

• Depending on the file type or DRM (Digital

Rights Management) system, some files

may not be able to be forwarded.

While composing a message, press <Options> to

access the following options:

•

Send: send the message.

5. Select the Audio line and add a sound clip.

6. When you have finished, press [Centre].

7. Enter a phone number or e-mail address.

Input method: change the text input mode.

Input language: change the language to be

used in T9 input mode.

•

Insert: insert a text template, Contacts entry, or

bookmarked URL address into text.

To send the message to more than one recipient,

fill in additional destination fields.

Save to Drafts: save the message in the Drafts

folder.

8. Press [Centre] to send the message.

Using options while composing an MMS

message

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers

messages containing a combination of text, image,

video, and audio, from phone to phone or from

phone to e-mail.

While composing an MMS message, press

<Options> to access the following options:

•

Send: send the message.

•

Input: enter the message text.

Creating and sending an MMS message

•

Add: add an image, video, or sound clip.

1. Enter the message subject.

•

Preview: view the message as it will be shown

on the recipient’s phone.

You can use various message composing

options by pressing <Options> in each

•

Input method: change the text input mode.

field.ꢀnext section

Input language: change the language to be

used in T9 input mode.

2. Select the Text line.

Menu functions

•

Insert text template: insert a text template.

2. Move to the Message field.

3. Enter the message text.

Save to Drafts: save the message in the Drafts

folder.

4. Move to the Attach files line.

5. Press <Options> and select Add files

•

Add page: add a page. Move to each page by

pressing [Left] or [Right].

Add

name card, or Add v-calendar

Move page: move the current page to the next

or previous page.

6. Select images, videos, sounds, name cards,

schedule items, or tasks.

•

Delete page: delete the added page.

7. Press <Options> and select Attach

Edit style: change the page properties.

8. When you have finished, press [Centre].

9. Enter a phone number or e-mail address.

This page: set the page duration and change

font colour and style for the selected page.

To send the message to more than one recipient,

fill in additional destination fields.

All page: change the background colour and

page layout.

10.Press [Centre] to send the message.

•

Edit Text

image, or sound clip.

Delete text Delete file: delete the added text,

/Change file: edit the added text,

Using options while composing a message

While composing a message, press <Options> to

access the following options in each field:

image, or sound clip.

•

Send: send the message.

Save as template: save the message as a

template in the Multimedia templates folder.

Input method: change the text input mode.

Input language: change the language to be

used in T9 input mode.

File messenger (Menu 5.1.3)

Use this menu to send multiple media files by

attaching them to an MMS message.

•

Insert text template: insert a text template.

Insert: insert a text template, Contacts entry, or

bookmarked URL address into text.

Creating and sending files via MMS

1. Enter a subject in the Subject line.

•

Attached file list: display the list you attached

files

You can use various message composing

options by pressing <Options> in each

Add files: add images, videos, or sounds.

field.ꢀnext section

•

Add name card: attach a Contacts entry as a

name card.

8. Enter an e-mail address.

To send the e-mail to more than one recipient, fill

in additional destination fields.

Add v-calendar: attach calendar data as a data

format attachment.

9. Press [Centre] to send the e-mail.

Delete all attachments: delete all

attachments.

Using options while composing an e-mail

While composing an e-mail, press <Options> to

access the following options in each field:

Save to Drafts: save the message in the Drafts

folder.

•

Send: send the e-mail.

Email (Menu 5.1.4)

Input method: change the text input mode.

You can send and receive e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your

Input language: change the language to be

used in T9 input mode.

•

Insert text template: insert a text template.

e-mail account.

ꢀp. 51

Insert: insert a text template, Contacts entry, or

bookmarked URL address into text.

Creating and sending an e-mail

1. Enter the e-mail subject.

•

Attached file list: display the list you attached

files.

You can use various message composing

options by pressing <Options> in each

•

Add files: add images, videos, or sounds.

field.ꢀnext section

Add name card: attach a Contacts entry as a

name card.

2. Move to the Message field.

3. Enter the message text.

4. Select the Attach files line.

•

Add v-calendar: attach calendar data as a data

format attachment.

Delete all attachments: delete all

attachments.

5. Scroll to a media file folder and press [Centre] to

select files.

Save to Drafts: save the e-mail in the Drafts

box.

6. Press <Options> and select Attach

7. When you have finished, press [Centre].

Menu functions

•

Add to Favourites: save the highlighted web

link to the bookmark list.

Inbox (Menu 5.2)

This folder stores all types of messages you have

received, except for e-mails.

Create email: send an e-mail to the highlighted

e-mail address.

Viewing a message

Reply: reply to the sender via SMS, MMS, or file

messenger.

The following icons may appear on the message list

to show the message type:

•

Forward: forward the message to other people.

•

SMS

Call back: dial the phone number of the sender.

MMS

Save to Contacts: save the sender’s phone

number, or the selected number, e-mail address,

or URL address to Contacts.

MMS notification

Push message from web servers.

•

Move to SIM/Move to phone: move the

message between the phone’s memory and the

USIM/SIM card.

Configuration message, containing network

parameters from your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

Delete: delete the message.

MMS messages

• A

icon next to a message means that the

•

Play: play the message.

Call Go to URL Go to RTSP: dial the

message is of high priority. A grey-coloured

message icon indicates low priority.

highlighted phone number or access the

highlighted web link.

Using message options

•

Add to Favourites: save the highlighted web

link to the bookmark list.

While viewing a message, press <Options> to

access the following options:

Create email: send an e-mail to the highlighted

e-mail address.

SMS messages

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

Create multimedia message: send an MMS

message to the highlighted e-mail address.

Reply: reply to the sender via SMS, MMS, or file

messenger.

•

Reply to all: send a reply to the sender and all

recipients.

Delivery reports

•

Call back: dial the phone number of the sender.

•

Forward: forward the message to other people.

Save to Contacts: save the sender’s phone

number, or the selected number, e-mail address,

or URL address to Contacts.

Send to Album: send the message to the online

media album, if provided.

•

Call back: dial the phone number of the sender.

•

Delete: delete the report.

Save as template: save the message as a

template in the Multimedia templates folder.

Drafts (Menu 5.3)

This folder stores messages you have saved to send

them at a later time.

•

Save files: save media items from the message

into your phone’s memory.

From the message list, press <Options> to access

the following options:

Save to Contacts: save the sender’s phone

number, or the selected number, e-mail address,

or URL address to Contacts.

•

View: open the selected MMS message.

Edit: edit the selected message.

•

Delete: delete the message.

Details: access the message properties.

Send: send the selected message.

Push messages

Sort by: change the sort order of the message

list.

•

Go to URL/Go to RTSP: connect to the URL

specified in the message.

•

Delete: delete the selected message.

•

Delete: delete the message.

Delete all: delete all messages.

Configuration messages

Outbox (Menu 5.4)

•

Install: apply the configuration specified in the

This folder stores messages the phone is attempting

to send or has failed to send.

message to your phone.

•

Delete: delete the message.

The following icons on the message indicates the

sending status:

•

Being sent

Failed to be sent

Menu functions

From the message list, press <Options> to access

the following options:

Email inbox (Menu 5.6)

This folder stores e-mails that you have received.

•

View: open the selected MMS message.

Send again: resend the message.

Viewing received e-mails

1. Press <Options> and select Download

Edit: edit the selected message.

The phone checks the e-mail server and

downloads new e-mails. The icons tell you the

status of each e-mail:

Cancel sending: cancel sending the message.

Sort by: change the sort order of the message

list.

•

: Retrieved e-mail

: Retrieved e-mail with attachments

: E-mail not retrieved

•

Delete: delete the selected message.

Delete all: delete all messages.

Details: access the message properties.

• Depending on the file type or DRM (Digital

Rights Management) system, some files

may not be able to be forwarded.

Sent box (Menu 5.5)

This folder stores messages that you have sent.

• A icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

From the message list, press <Options> to access

the following options:

•

View: open the selected message.

2. Select an e-mail or header.

Forward: forward the message to other people.

3. If the e-mail has more than one page, press

Sort by: change the sort order of the message

list.

[

] to scroll through pages one by one.

4. Select an attached file to view or play it.

•

Delete: delete the message.

Using e-mail options

Delete all: delete all messages.

Details: access the message properties.

While viewing the e-mail list or an e-mail, press

<Options> to access the following options:

•

View: open the selected e-mail.

•

Retrieve: retrieve the body of the selected

e-mail header from the e-mail server.

•

Call

Go to URL

Go to RTSP: dial the

•

Delete permanently: delete the selected

e-mail or all e-mails from both the phone and the

e-mail server.

highlighted phone number or access the

highlighted web link.

•

Add to Favourites: save the highlighted web

link to the bookmark list.

•

Email accounts: change the active e-mail

account.

Create email: send an e-mail to the highlighted

e-mail address.

Details: access the e-mail properties.

Media Album (Menu 5.7)

Create multimedia message: send an MMS

message to the highlighted e-mail address.

Use this menu to access the Media Album service,

with which you can organise your own online media

album, adding media content and messages via the

wireless web. This menu is only available if

supported by your service provider.

Reply: reply to the sender via SMS, MMS, or file

messenger.

•

Reply: send a reply to the sender.

Reply to all: send a reply to the sender and all

recipients.

Templates (Menu 5.8)

•

Forward: forward the e-mail to other people.

Use this menu to make and use templates of

frequently used messages or passages.

Download: retrieve new e-mails or headers

from the e-mail server.

Text templates (Menu 5.8.1)

•

Sort by: change the sort order of the message

list.

You can create SMS templates with the sentences

you use frequently so that you can retrieve and

insert them when composing an SMS message.

•

Save files: save the selected file.

Save to Contacts: save the sender’s phone

number, or the selected number, e-mail address,

or URL address to Contacts.

Creating a template

1. Press <New>, or press <Options> and select

New, if one has been already stored.

•

Block: add the sender’s e-mail address or

subject to the Block list to reject e-mails from

that address or containing that subject.

2. Enter a message and press [Centre].

Delete from phone: delete the selected e-mail

or all e-mails from the phone.

Menu functions

Using template options

•

Delete: delete the template.

Delete all: delete all templates.

From the text template list, press <Options> to

access the following options:

Broadcast (Menu 5.9)

•

Send: send the template as an SMS, MMS, file

Your phone receives Cell Broadcast (CB) messages,

which are text messages related to various topics,

such as weather forecast, traffic, and news report,

from networks. Use this menu to access received CB

messages.

messenger, or e-mail.

•

New: add a new template.

Edit: change the selected template.

Delete: delete the template.

Delete all: delete all templates.

Viewing a CB message

Multimedia templates (Menu 5.8.2)

All CB messages are stored in the Temporary folder

and will be deleted after a period of time. If you do

not want a message to be deleted, save it to the

Archive folder.

You can create MMS templates so that you can use

them in composing an MMS message.

Creating a template

1. Press <New>, or press <Options> and select

Using message options

New, if one has been already stored.

While viewing a message, press <Options> to

2. Create a template as you would when creating

an MMS message.

access the following options:

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

3. Press [Centre] to save the template.

Using template options

•

Create email: send an e-mail to the highlighted

e-mail address.

From the template list, press <Options> to access

the following options:

•

Save: save the message in the Archive folder.

•

View: open the selected template.

Send: send a new message.

Delete: delete the message.

New: add a new template.

Edit: change the selected template.

Network selection: select CS preferred

(GSM) or PS preferred (GPRS), depending on

your network.

Delete all (Menu 5.0)

Use this menu to delete all of the messages in each

message folder at once.

Keep a copy: leave the copies of your messages

in the Sent box folder after sending.

1. Press [Centre] to check the message boxes you

want.

Character support: select a character encoding

type. When you select Automatic, the phone

switches the encoding type from GSM alphabet

to Unicode if you enter a unicode character. Use

of Unicode encoding will reduce the maximum

number of characters in a message to about half.

If this menu is not shown, your phone provides

the automatic character encoding by default.

2. Press <Delete>.

3. Press <Yes> to confirm the deleting.

Settings (Menu 5.

Use this menu to set up various options for using

messaging service.

Text message (Menu 5.

*.1)

Multimedia message (Menu 5.

*.2)

You can configure default SMS settings.

You can configure default MMS settings.

•

Settings x: set the properties of each profile:

•

Sending options: set up the options for sending

MMS messages:

Centre address: store or change the number of

your SMS server.

Priority: set the priority level of your messages.

Expiration: set the length of time your

messages are stored in the SMS server.

Expiration: set the length of time your

messages are stored in the MMS server.

Default type: set the default message type. The

network can convert messages into the selected

format.

Custom time(Hour): enter the length of time

you want if you select Custom time in the

Expiration option.

Name: enter a profile name.

Delivery: set a time delay before messages are

sent.

•

Sending settings: set up the options for

sending SMS messages:

Custom time(Hour): enter the length of time

you want if you select Custom time in the

Delivery option.

Reply path: allow recipients to reply to you

through your SMS server.

Delivery report: set the network to inform you

when your message has been delivered.

Menu functions

Hide address: set your address to be hidden

from the recipient’s phone.

Manual: the phone receives notifications first

from the server. Use the Retrieve option to

manually download new messages.

Request delivery report: set the network to

inform you when your message has been

delivered.

Restricted: the phone receives notifications

first from the server. When you attempt to

download new messages, the phone informs

you of additional charges.

Request read report: send a read-replay

request along with your messages.

Reject: the phone rejects all messages.

Keep a copy: leave the copies of your messages

in the Sent box folder after sending.

Send delivery report: set the network to

inform the sender when a message has been

delivered to you.

Add my name card: allow your contact

information to be attached to your messages via

the file messenger.

Send read report: determine whether or not

the phone sends a read-reply when an incoming

message has been read.

Add signature: edit and attach your signature

to messages via the file messenger.

Reject anonymous: reject messages from

unknown senders.

Input signature: edit your signature.

•

Receiving options: set up the options for

receiving MMS messages:

Reject advertisement: reject advertisements.

•

MMS profiles: select a connection profile to be

used for MMS. You can also create or edit a

Home network: determine if your phone

retrieves new messages automatically when you

are in your home service area.

profile.

ꢀp. 74

Message size: select the maximum file size of

MMS attachment. This file size may vary,

depending on your country.

Roaming network: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Creation mode: select an MMS creation mode:

Reception within your home network or while

roaming has the following options:

Warning: you can create a message with any

type of content and of any size, but the phone

will inform you when the content and size have

exceeded the maximum.

Auto download: the phone automatically

retrieves messages from the server.

Free: you can create a message with any type of

content and of any size.

Restricted: you can create a message with the

type of content and size specified by default.

Set download limit: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

•

Slide interval: select the length of time the

display shows each page in a message.

Auto polling: set the phone to automatically

check the e-mail server to download e-mails at

the specified intervals.

Email (Menu 5.*.3)

You can configure default e-mail settings.

Polling frequency: set how often the phone

checks the e-mail server for automatic polling.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

Block address: specify e-mail addresses to

reject e-mails from those addresses, and

activate or deactivate mail blocking.

•

Sending options: set up the options for sending

e-mails:

Block subject: specify subjects to reject e-mails

which contain those subjects you specify, and

activate or deactivate mail blocking.

From: set the sender name.

Sending account: select the default account.

Priority: select the priority level of e-mails.

•

Email profiles: select a network connection

profile to be used for e-mail services. You can

Keep a copy: leave the copies of your e-mails in

the Sent box folder after sending.

also create or edit a profile.

Email accounts: set up an e-mail account and

select an account to be used. Press <Options

ꢀp. 74

Include body when replying: set whether or

not the phone includes the original e-mail text in

a reply.

and select Edit to access the following options

Delivery report: set the network to inform you

when your e-mail have been delivered.

for setting up an account:

Account name: enter a name for the currently

selected account.

Add my name card: allow your contact

information to be attached to e-mails.

SMTP server: enter the IP address or host

name of the outgoing e-mail server.

Add signature: attach your signature to

e-mails.

SMTP port: enter the SMTP port number.

Input signature: edit your signature.

Use SSL: activate the use of the SSL (Secure

Sockets Layer) protocol.

•

Receiving options: set up the options for

receiving e-mails:

Menu functions

Retrieving server type: select the protocol for

the incoming e-mail server. The remaining

options depend on the protocol type setting.

Voice mail (Menu 5.*.4)

You can change the number of the voicemail server.

You must store the voicemail server number

before accessing the server. Your service provider

can give you the number.

POP3 server/IMAP4 server: enter the IP

address or host name of the POP3 or IMAP4

server.

POP3 port/IMAP4 port: enter the POP3 or

IMAP4 port number.

Push message (Menu 5.*.5)

You can change the settings for receiving push

messages from the wireless web server.

Use SSL: activate the use of the SSL (Secure

Sockets Layer) protocol.

•

Receiving option: set whether or not to receive

push messages from the web server.

IMAP4 retrieving option: (IMAP4 protocol

only): set whether the phone retrieves only new

messages or all messages.

•

Service loading: set whether or not your phone

automatically launches the web browser to

access a push message as it comes in.

Retrieving option: set which part of e-mails

the phone retrieves from the server.

Broadcast (Menu 5.*.6)

Keep in server: leave the copies of e-mails in

the server after retrieving.

You can change the settings for receiving CB

messages.

My Address: set your e-mail address.

•

Receive: select to receive CB messages, or not.

User name: enter the POP3 or IMAP4 user

name.

Channel: indicate the channels from which you

wish to receive CB messages. Please contact

your service provider for further details.

Password: enter the POP3 or IMAP4 password.

Use SMTP Authentication: enable SMTP

authentication, which requires the user to log in

before sending e-mails.

•

Language: select the preferred languages in

which CB messages display.

Same as POP3/IMAP4: select if you want the

SMTP server to have the same parameters as the

POP3 or IMAP4 server.

Memory status (Menu 5.#)

Use this menu to view the memory status for Text

message, Multimedia message, Email, Push

message.

User name: enter the SMTP user name.

Password: enter the SMTP password.

Images

File manager (Menu 6)

Use this menu to access photos you have taken and

images you have downloaded, received in

messages, or imported from your computer.

The File manager menu allows you to access

images, videos, music files, and sounds stored in the

phone’s memory.

Viewing an image

1. Scroll to an image folder.

To access this menu, press [Centre] in Idle mode

and select File manager

2. Select an image.

Tips for Digital Rights Management

Viewing a slide show

As a result of the Digital Rights Management (DRM)

system, some of the media items you download

from the Internet or receive by MMS may require a

licence key to access them. You can acquire the key

from the website which owns the rights to the

content; use the Activate key option.

You can view your images as a slide show, a

sequential presentation of each image in the current

folder.

1. Scroll to an image folder.

2. Select an image.

Note the following icons on the list:

3. Press <Options> and select Slide show

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

The slide show begins.

4. Press <Back> to stop the slide show.

Editing an image

1. Select a photo from the Pictures folder.

Your phone supports only count-based or unlimited-

access DRM files.

2. Press <Options> and select Edit

3. Press <Options> and change the photo using

the following options:

•

Resize: change the image size.

Effects: change the colour tone or apply a

special effect to the photo.

•

Adjust: adjust the brightness, contrast, or

colour balance.

Frames: apply a decorative frame.

Menu functions

•

Cliparts: add an image clip to the photo.

•

Slide show: view all images as a slide show.

Insert text: add text to the photo.

Rotate: rotate the photo clockwise or

counterclockwise.

Flip: flip the photo vertically or horizontally.

Crop: select a variously sized and shaped

section of the photo.

Activate key: get a new license key when the

key for the selected DRM file expires.

•

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

•

Edit: edit the image and save it as a different

4. When you have finished, press <Done

file.

5. Press <Options> and select Save as

•

Delete: delete the file.

6. Enter a photo name and press <Save>.

Rename: change the file name.

Details: access the file properties.

Using image options

Key management: manage license keys you

have acquired.

While viewing an image, press <Options> to access

the following options:

Downloading images

1. Scroll to the Downloads folder.

•

Send: send the selected file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

2. Select More pictures. You are connected to the

•

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

preset website by your service provider.

3. Search for the file you want and follow the

onscreen instructions to download it.

Visible to Bluetooth: share the file with other

Bluetooth devices.

Videos

Set as: set the image as your wallpaper for the

displays or a caller ID image for a Contacts

entry.

Use this menu to access video clips you have

recorded, downloaded, received in messages, or

imported from your computer.

•

Move: move the file to another folder.

Copy: copy the file to another folder.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Real size: view the image in its actual size.

Press <Phone size> to fit the image to the

display.

•

New folder: add a new folder.

Playing a video clip

1. Scroll to a video folder.

Details: access the file properties.

2. Select a video clip. The media player opens.

Memory status: access the memory

information for each folder in File manager

ꢀp. 34

•

Key management: manage license keys you

have acquired.

Using video options

From the video list, press <Options> to access the

following options:

Downloading video clips

1. Scroll to the Downloads folder.

•

Play: play the selected file.

2. Select More videos. You are connected to the

Add to play list: add the selected file to the

play list.

preset website by your service provider.

3. Search for the file you want and follow the

onscreen instructions to download it.

•

Send: send the selected file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

Music

•

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

This menu displays AAC or MP3 music files you have

downloaded or received in messages.

Visible to Bluetooth: share the file with other

Bluetooth devices.

Playing a music file

Activate key: get a new license key when the

key for the selected DRM file expires.

Select a music file. The selected music file

plays.ꢀp. 34

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

Using music options

From the music list, press <Options> to access the

following options:

•

Move: move the file to another folder.

Copy: copy the file to another folder.

Delete: delete the selected file or all files.

Rename: change the file name.

•

Play: play the selected file.

Add to play list: add the selected file to the

play list.

•

Send: send the selected file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

Lock/Unlock: lock the file to prevent it from

being deleted, or unlock the file.

Menu functions

•

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Sounds

Use this menu to access voice memos you have

recorded, and sound clips you have downloaded,

received in messages, or imported from your

computer.

Visible to Bluetooth: share the file with other

Bluetooth devices.

Set as ringtone: set the file as your ringtone

for voice calls or video calls.

Playing a sound clip

1. Scroll to a sound folder.

Set as caller ID: set the file as a caller ringer

ID.

2. Select a sound clip. The music player opens and

the selected sound plays.

Activate key: get a new license key when the

key for the selected DRM file expires.

For a voice memo, see Voice memo

.ꢀp. 36

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

During playback, use the following keys:

Keys

Left

Description

•

Delete: delete the selected file or all files.

Moves to the previous file.

Skips to the next file.

Adjusts the volume.

Rename: change the file name.

Right

Lock/Unlock: lock the file to prevent it from

being deleted, or unlock the file.

New folder: add a new folder.

Details: access the file properties.

Memory status: access the memory

Up/Down/

•

Centre

Allows you to send the selected file to

other people.

information for each folder in File manager

•

Key management: manage license keys you

have acquired.

Using sound options

While playing a sound clip, press <Options> to

access the following options:

Downloading music files

•

Send: send the selected file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

1. Select More music. You are connected to the

preset website by your service provider.

2. Search for the file you want and follow the

onscreen instructions to download it.

•

Hidden from Bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Games & More

Use this menu to download Java games and

applications, and play them.

Visible to Bluetooth: share the file with other

Bluetooth devices.

Playing a game

1. Select a game.

•

Delete: delete the selected file.

Rename: change the file name.

2. Follow the onscreen instructions.

Set as ringtone: set the file as your ringtone

for voice calls or video calls.

Using Java game options

•

Set as caller ID: set the file as a caller ringer

ID.

While viewing the game list, press <Options> to

access the following options:

Activate key: get a new license key when the

key for the selected DRM file expires.

•

Download: connect to the preset web site.

Play: launch the selected game.

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

Activate key: get a new license key when the

key for the selected DRM file expires.

•

Reactivate key: get another license key even

when the key for the selected DRM file has not

expired.

•

Details: access the file properties.

Key management: manage license keys you

have acquired.

•

Delete: delete the selected game or all games.

Downloading sound clips

Rename: change the name of downloaded

game.

1. Select More ringtones. You are connected to

the preset website by your service provider.

•

Lock/Unlock: lock the game to prevent it from

being deleted, or unlock the game.

2. Search for the file you want and follow the

onescreen instructions to download it.

•

Details: access the game properties.

Key management: manage the license keys

you have acquired.

•

New folder: add a new game folder.

Menu functions

•

Network settings: activate a connection profile

to be used for accessing a Java server. You can

also create or edit a profile. p. 74

Memory status: access the memory

information for each folder in File manager

Organiser (Menu 7)

The Organiser menu enables you to keep track of

your schedule.

ꢀ

•

To access this menu, press [Centre] in Idle mode

and select Organiser

Downloading new games

Alarms (Menu 7.1)

1. Select More games. You are connected to a

preset website by your service provider.

Use this menu to set alarms to sound at specific

times. The alert type for a normal alarm corresponds

to the call alert type settings in the currently

selected profile. A wake-up alarm does not be

affected by your profile setting.

2. Search for the game you want and follow the

onscreen instructions to download it.

Other files

Files that you have received but which are not

supported by your phone are stored in this folder.

You cannot open these files on the phone.

Unsupported file formats are DOC, PPT, TXT and so

on.

Setting an alarm

1. Select the type of alarm.

2. Scroll to On on the Alarm line and press

[Down].

3. Enter the time for the alarm to sound and press

[Down].

4. Set the repeat option from the Repeat line.

5. Select the Alert tone line.

6. Select an alarm melody.

7. Press <Options> and select Save

Stopping an alarm

When the time for an alarm comes and the alarm

sounds:

•

For a non-wake-up alarm, press any key.

•

For a wake-up alarm, press <OK> or [Centre].

Press any key, except <OK> or [Centre], to

cause it to sound again after 5 minutes.

Creating an item

You can store scheduled items, anniversaries, tasks,

and memos on the calendar. More than one item per

day can be stored.

Deactivating an alarm

Entering a scheduled item

When you do not need an alarm any longer, you can

deactivate it.

1. Select a date on the calendar.

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press [Centre].

2. Press <Options> and select New

→

Schedule.

3. Enter information or change the settings:

•

Title: enter the title for the scheduled item.

Details: enter the details of the scheduled

item.

Setting alarms to sound when the phone is

off

•

Start and End: enter the starting and ending

times for the scheduled item.

Start date and End date: enter the starting

and ending dates for the scheduled item.

Location: enter information about the

appointed location.

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to

sound, the phone switches on and sounds the alarm.

Calendar (Menu 7.2)

Use this menu to keep track of your monthly

schedule.

•

Alarm: set an alarm for the scheduled item.

before: set how long before the scheduled

item the alarm is to alert you.

Selecting a day on the calendar

•

Repeat: set the scheduled item to recur. You

can select a repeat unit.

until: set the ending date, if the scheduled

item will recur.

Expiry: set when the scheduled item will be

deleted from the calendar.

When you enter the Calendar menu, the calendar

appears with today’s date indicated by a blue box.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [

] to move by month.

4. Press <Options> and select Save to save the

scheduled item.

Menu functions

Entering an anniversary

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select New

→

Memo.

Anniversary

3. Enter the memo text and press [Down].

4. Enter the date.

3. Enter information or change the settings:

•

Occasion: enter information about the

anniversary.

Date: enter the date.

Alarm: set an alarm for the anniversary.

before: set how long before the anniversary

the alarm is to alert you.

5. Press <Options> and select Save

Consulting the calendar

•

Once you have scheduled things, the square

brackets appear on the corner of the date cell.

Viewing an item

•

alarm time: enter the time for the alarm to

ring.

Repeat every year: set the phone to

remind you of the anniversary every year.

1. Select a date on the calendar to display the

items for the day.

2. Select an item to view its details.

The following icons indicate the types of items:

4. Press <Options> and select Save

Entering a task

•

Scheduled items

Tasks

•

Anniversaries

Memos

1. Select a date on the calendar.

2. Press <Options> and select New

From the item list, press <Options> to access the

following options:

→

Task.

3. Enter information or change the settings:

•

View: access the selected item.

•

Title: enter the title for the task.

Task: enter task details.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

New: add a new item.

Completed/To do: change the status of the

selected task.

•

Month view: switch to the monthly view screen.

Week view: switch to the weekly view screen.

4. Press <Options> and select Save

Change date/Change due date/Reschedule:

change the date of the item.

•

Delete: delete the selected item.

•

Delete all: delete all of the items for the

selected day.

2. Select the time cell that contains the item you

want.

Send schedule/Send task: send the item via

SMS, e-mail, file messenger, or Bluetooth.

Today’s events (Menu 7.4)

Use this menu to view items for the selected date.

Send memo: send the memo via SMS.

Select an item to view its details. The item opens in

Edit mode.

Using calendar options

From the calendar, press <Options> to access the

following options:

Schedule (Menu 7.5)

•

View: display the items stored for the selected

date.

This menu displays the scheduled items. If you have

set the Repeat and Alarm options, the

icons display.

and

•

New: add a new scheduled item, anniversary,

task, or memo.

Select a scheduled item to view its details.

•

Week view: display the weekly view screen.

Go to today: go to today’s date.

Anniversary (Menu 7.6)

Go to date: enter a specific date.

This menu displays anniversaries you have created.

If you have set the Repeat and Alarm options, the

Start date: set whether the calendar starts with

Sunday or Monday.

and

icons display.

•

Delete: delete the items for the specific period.

Select an anniversary to view its details.

Delete all: delete all of the items in the

calendar.

Task (Menu 7.7)

Use this menu to display tasks you have created.

The icons on the right indicate the importance; the

lower the number on the icon, the higher the

priority. A check mark appears in the status check

box if the task has been completed.

Week view (Menu 7.3)

Use this menu to view items for the selected week.

The current date is marked in blue. Square brackets

on a calendar date indicate the types of items

scheduled for that day.

Select a task to view its details.

1. Scroll up to the date line and press [Left] or

[Right] to access another week.

Menu functions

Memo (Menu 7.8)

Camera (Menu 8)

This menu displays memos you have created.

Select a memo to view its details.

You can use the camera module embedded in your

phone to take photos and record videos. Using the

Camera menu, you can turn on the camera.

Missed event alarm (Menu 7.9)

To access this menu, press [Centre] in Idle mode

and select Camera or press and hold [ ].

When you are unable to acknowledge an alarm for a

scheduled appointment or anniversary, the phone

stores the alarm until you confirm it.

• Do not take photos of people without their

permission.

1. Select an item.

• Do not take photos in a place where cameras

are not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

2. Press <Confirm> to confirm and delete the

item.

Memory status (Menu 7.0)

Taking a photo

This menu displays the number of items of each type

you have created, and the total number of items you

can store.

The camera will produce JPEG photos.

When you take a photo in direct sunlight or in

bright conditions, shadows may appear on the

photo.

Taking a photo with the phone open

1. Access the Camera menu to turn on the camera

and switch the display to Capture mode. You can

also press and hold [ ] in Idle mode.

2. Press [ ] to switch between the interior lens

below the display and the exterior lens on the

external of the phone.

3. Make any desired adjustments.

•

Press <

> to use the camera options.

ꢀnext section

•

Use the keypad to change the camera

settings or switch to other modes. p. 64

Multi shot: take a series of action stills. You can

select the number of photos the camera will

take.

ꢀ

4. Press [Centre] to take a photo. The photo is

saved in the Pictures folder.

Mosaic shot: take several stills and save them

in one frame. You can select the layout.

5. To

use photo options

Press

Options> or <

p. 64

Delete> or < >,

•

Effects: change the colour tone of the image.

Frames: apply a decorative frame.

ꢀ

Timer: set a time delay before the camera takes

a photo.

delete the photo

•

Zoom/Hide zoom: display the zoom control bar

and zoom in or out by pressing [Up] or [Down],

or hide the control bar.

and then <Yes>.

return to Capture mode

[Centre].

Brightness/Hide brightness: display the

Using camera options in Capture mode

brightness control bar and adjust the brightness

by pressing [Left] or [Right], or hide the control

bar.

In Capture mode, press <

following options:

> to access the

•

Take photo: take a photo.

•

Camera settings: change the default settings

for taking a photo:

Record video: switch to Record mode.

Default name: change the default prefix of file

names.

Switch camera: switch between the interior

lens and the exterior lens.

Viewfinder: select a preview screen.

Shutter sound: select a camera shutter sound.

Capture quality: select an image quality.

Image size: select an image size.

•

Go to Photos: access the Pictures folder.

ꢀp. 53

Shooting mode: take a photo in the following

modes:

Single shot: take a photo in Normal mode. You

can select whether or not the camera

automatically saves a photo.

Multi shot speed: select the shooting speed in

Multi Shot mode.

Menu functions

Spot metering: adjust the exposure based on a

Key

Function

specific area of the image. Select On to display

the spot focus frame in the middle of the image,

and change the exposure according to the

brightness of the image fragment in the frame.

Selects a decorative frame.

Sets the timer.

Goes to the Pictures folder.

Changes the preview screen.

White balance: adjust the colour balance of the

photo. You can make your photo appear warmer

or cooler.

Using photo options

•

Camera shortcuts: view the functions of the

keys you can use in Capture mode.

After saving a photo, press <Options> or <

> to

access the following options:

Using the keypad in Capture mode

•

Viewfinder: return to Capture mode.

View: access one of the multi-shot photos.

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

You can use the keypad to customise your camera

settings in Capture mode.

Key

Function

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness.

•

Delete: delete the file.

Set as: set the photo as wallpaper for displays,

or as a caller ID image for a Contacts entry.

Left/Right

Up/Down

Zooms in or out. (Not available for

the maximum size)

•

Go to Photos: access the Pictures folder.

ꢀp. 53

•

Rename: change the file name.

Switches to Record mode.

ꢀp. 65

Taking a photo with the phone closed

1. Press and hold [ ].

Changes the image size.

Changes the image quality.

Changes the shooting mode.

Changes the colour tone.

•

Press [ ] to flip the image vertically.

Press [ ] to view the mirror image.

2. Press [ ] to take a photo. The photo is

automatically saved.

Using camera options in Record mode

Recording a video

In Record mode, press <

options:

> to access the following

You can record a video of what is displayed on the

camera screen and save it.

•

Record: start recording.

Recording a video

1. Access the Camera menu to turn on the camera

Take photo: switch to Capture mode.

Switch camera: switch between the interior

lens or exterior lens.

or press and hold [ ] in Idle mode.

2. Press [1] to switch to Record mode.

•

Go to Videos: access the Videos folder.

Effects: change the colour tone of the image.

Zoom Hide zoom: display the zoom control bar

ꢀp. 54

3. Press [ ] to switch between the interior lens

below the display and the exterior lens on the

external of the phone.

and zoom in or out by pressing [Up] or [Down],

or hide the control bar.

4. Make any desired adjustments.

•

Press <

next section

Use the keypad to change the camera

settings or switch to other modes. p. 66

5. Press [Centre] to start recording.

> to use the camera options.

•

Brightness/Hide brightness: display the

ꢀ

brightness control bar and adjust the brightness

by pressing [Left] or [Right], or hide the control

bar.

•

ꢀ

Video settings: change the following settings

for recording a video:

6. Press [Centre] to stop recording. The video

automatically saves in the Videos folder.

Default name: change the default prefix of file

names.

7. To

use the video options

Press

Quality: select an image quality.

<Options>.

ꢀ

p. 66

Recording time: select a video recording mode.

delete the video clip

<Delete> or [

], and

Select Limit for MMS to record a video suitable

for an MMS message.

then <Yes>.

return to Record mode

[Centre].

Select Normal to record a video within the limit

of the currently available memory. The length of

your video is determined by how much memory

has been used.

Menu functions

Size: select a frame size.

•

Send: send the file via MMS, e-mail, file

messenger, or Bluetooth. You can also send the

file to the online media album, if provided.

Audio record: turn the audio on or off.

•

Camcorder shortcuts: view the functions of

the keys you can use in Record mode.

•

Delete: delete the file.

Go to Videos: access the Videos folder.

ꢀp. 54

Using the keypad in Record mode

Rename: change the file name.

Key

Function

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness.

Zooms in or out.

Settings (Menu 9)

The Settings menu provides you with various

setting options to customise the phone to your

preferences and needs. You can also reset the

settings to their default status.

Left/Right

Up/Down

Switches to Capture mode.

ꢀp. 62

To access this menu, press [Centre] in Idle mode

and select Settings

Changes the frame size.

Changes the image quality.

Profiles (Menu 9.1)

Changes the video recording mode.

Your phone provides you with sound profiles that

allow you to quickly and easily change the sound

settings of the phone for different events or

situations. Use this menu to adjust the properties of

each profile and activate the profile you need.

Changes the colour tone of the

image.

Mutes or unmutes audio.

Goes to the Videos folder.

Editing a profile

1. Scroll to the profile you want.

Using video options

2. Press <Options> and select Edit

After saving a video clip, press <Options> to access

the following options:

3. Change the sound settings:

•

Call alert type: select an alert type for the

call ringer.

•

Play: play back the file.

Viewfinder: return to Record mode.

•

Voice call ringtone: select a ringtone for

the call ringer of voice calls.

Video call ringtone: select a ringtone for

the call ringer of video calls.

Tone volume: adjust the volume for the call

ringer.

Message alert type: select an alert type for

the message ringer.

Message alert tone: select a ringtone for

the message ringer.

Message alert repetition: select if the

phone repeatedly reminds you of a new

message.

Alerts on call: set the phone to beep when

you receive a new message or when the time

for an alarm comes during a call.

•

Key tones: select a tone which sounds when

you press a key.

Key tone volume: adjust the volume of the

key tones.

Call answer mode: (For Car) select how to

answer an incoming call.

4. When you have finished, press <Options> and

select Save

Changing an active profile

From the profile list, select the profile you want.

•

Phone sounds: turn the various sounds on

the phone on or off:

Time & date (Menu 9.2)

All on: enable all tones.

Use this menu to change the time and date

displayed on your phone. Before setting the time

and date, specify your time zone in the World clock

Popup box alerts: set the phone to beep

when a pop-up window displays.

Power on/off: set the phone to beep when

you turn on or off the phone.

menu.

ꢀp. 37

Time: enter the current time.

Date: enter the current date.

•

Folder open/close: set the phone to sound

when you open or close the phone.

Time format: select a time format.

Date format: select a date format.

Minute minder: set the phone to beep

every minute during an outgoing call to keep

you informed of the length of your call.

Summer time: select to apply daylight savings

time.

Call connect tone: set the phone to beep

when a call is connected to the system.

•

Auto update: select to receive time information

from your network.

Call end tone: set the phone to beep when a

call is disconnected by the other person or

the faded signal.

Menu functions

Anykey answer (Menu 9.3.4)

Phone (Menu 9.3)

Use this menu to answer an incoming call by

pressing any key, except <Reject> and [ ].

Many different features of your phone’s system can

be customised to suit your preferences.

Volume key (Menu 9.3.5)

Language (Menu 9.3.1)

Use this menu to set whether the phone mutes the

call ringer or rejects a call if you press and hold

Use this menu to select one of several languages for

the display text or T9 input mode.

[

] when a call comes in.

Shortcuts (Menu 9.3.2)

Key management (Menu 9.3.6)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut to a key.

Use this menu to manage the licence keys you have

acquired to activate media contents locked by DRM

systems.

Assigning a shortcut menu

Press <Options> to access the following options:

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Using the shortcut options

•

View: open the corresponding media item.

Delete: delete the selected licence key.

Go to My Messages: access the message that

contains the media content.

On the Shortcuts screen, press <Options> to

access the following options:

•

Go to File manager: access the corresponding

file folder.

•

Assign: assign a shortcut menu to an empty

location.

Details: access the properties of the licence key.

•

Change: change a shortcut assignment.

Cover keypad lock (Menu 9.3.7)

Remove: deactivate the shortcut assignment to

Use this menu to lock the exposed keys to keep

accidental presses from affecting your phone’s

operation when the phone is closed.

the selected key.

•

Remove all: deactivate all shortcut

assignments.

Active folder (Menu 9.3.3)

Use this menu to answer incoming calls by opening

the phone.

Dialling display (Menu 9.4.6)

Display (Menu 9.4)

Use this menu to select a font type, font size and

colour for the numbers entered and background

colour of the display while dialling.

Use this menu to change settings for the display.

Greeting message (Menu 9.4.1)

Use this menu to enter the greeting that is displayed

on the main display or external display.

Main menu style (Menu 9.4.7)

You can select a display style for the main menu

screen.

Wallpaper (Menu 9.4.2)

You can change the background image that is

displayed on the main display.

Call (Menu 9.5)

Use this menu to set options for call functions.

Cover LCD (Menu 9.4.3)

Use this menu to select an image or text to be

displayed on the external display.

Caller ID (Menu 9.5.1)

This network service allows you to prevent your

phone number from being displayed on the phone of

the person being called. If you select By network

the phone will use the default setting provided by

the network.

•

Clock: select a clock type.

Cover title: enter the text you want.

Wallpaper: press <Change> and select an

image. If necessary, select the portion of the

image to be displayed.

Some networks do not allow the user to change

this setting.

LCD brightness (Menu 9.4.4)

Diverting (Menu 9.5.2)

Use this menu to adjust the brightness of the main

display for varying lighting conditions.

This network service reroutes incoming calls to a

different phone number that you specify.

Backlight (Menu 9.4.5)

1. Select the type of calls to be diverted.

2. Select a call diverting option:

You can select the length of time the backlight or

display stays on.

•

Always: divert all calls.

Busy: divert calls when you are on another

call.

No reply: divert calls when you do not

answer the phone.

•

On: select the length of time the backlight stays

on in times of inactivity.

•

Dim: select the length of time the display stays

on in Dim mode after the backlight turns off.

After a specified time, the display turns off.

•

Menu functions

•

Unreachable: divert calls when you are not

in an area covered by your service provider

or when your phone is switched off.

3. Enter the call barring password supplied by your

service provider.

4. Press <Options> and select Activate. To

•

Cancel all: cancel all call diverting options.

deactivate the call barring, select Deactivate

3. Enter the number to which the calls will be

You can change the call barring password

obtained from your service provider. From the call

diverted in the Divert to line.

type list, press <Options> and select Change

4. If you selected No reply, move to the Waiting

time line and select the length of time the

network delays before diverting a call.

password

Waiting (Menu 9.5.4)

5. Press <Options> and select Activate. To

This network service informs you when someone is

trying to reach you while you are on another call.

deactivate the call diverting, select Deactivate

Barring (Menu 9.5.3)

1. Select the type of calls to which the call waiting

option will apply.

This network service allows you to restrict your calls.

1. Select the type of calls to be barred.

2. Select a call barring option:

2. Press <Options> and select Activate. To

deactivate the call waiting, select Deactivate

•

All outgoing calls: prohibit all outgoing

calls.

Outgoing int’l calls: prohibit international

calls.

Auto redial (Menu 9.5.5)

Use this menu to make up to ten attempts to redial

a phone number after an unsuccessful call.

Closed user group (Menu 9.5.6)

Int’l calls exc.home: only allow calls to

numbers within the current country when you

are abroad, and to your home country.

All incoming calls: prohibit incoming calls.

Incoming calls when roaming: prohibit

incoming calls when you use your phone

outside of your home country.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received

normally.

Use this menu to set incoming and outgoing calls to

be restricted to a selected user group. For details

about how to create a closed user group, contact

your service provider.

•

Use user group: activate CUG index numbers.

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from

the list.

Connectivity (Menu 9.6)

Use this menu to set options for connection available

on your phone.

Bluetooth (Menu 9.6.1)

Group index: add, delete, or activate CUG

index numbers.

Using Bluetooth wireless, you can connect the phone

wirelessly to other Bluetooth devices and exchange

data with them, talk hands-free, or control the

phone remotely.

Video call (Menu 9.5.7)

Use this menu to change the default settings for

using the video call feature.

Bluetooth technology allows free wireless

connections between all Bluetooth-compliant

devices within a range of 10 metres. Since the

devices communicate using radio waves, they do not

need to be in line of sight to each other.

•

Show me: change the video camera settings for

receipt of video calls:

Optionally: you can select whether or not the

video camera is used each time you answer a

video call.

• If there are obstacles between the devices,

the operating distance may be reduced.

• It is recommended that you do not use the

Bluetooth feature while using multimedia

features, such as voice recorder, camera, and

media player, or vice versa, for the better

performance.

Always: the camera is always used.

•

Retry by: set what to do when a video call does

not connect:

Voice call: the phone retries with a voice call.

Multimedia message: the phone turns on the

camera and switch to Record mode so that you

can record a video and send it as an MMS

message.

• Some devices may not be compatible with

your phone.

None: the phone does not retry.

Menu functions

Setting up the Bluetooth feature

•

Unknown device

Printer

The Bluetooth menu provides the following

options:

The colour of the icon indicates the status of the

device:

•

Activation: activate or deactivate the Bluetooth

feature.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected

to your phone

My devices: search for connectable Bluetooth

devices.

My phone’s visibility: allow other Bluetooth

devices to connect to your phone.

3. Select a device.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

4. Enter a Bluetooth PIN and press <OK>. This

code is used just once and you do not need to

memorise it.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access

your data.

When the owner of the other device enters the

same code, pairing is finished.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has one, you must

enter the code.

Bluetooth service: display available Bluetooth

services.

Searching for and pairing with a Bluetooth

device

Using device options

1. From the Bluetooth menu, select My devices

From the device list, press <Options> to access the

following options:

2. Select Search new device

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

•

Connect: connect to a headset or hands-free car

kit.

Disconnect: end the connection with the

connected headset or hands-free car kit.

•

Hands-free car kit or headset

Mobile phone

Computer

PDA

Browse device: search for data from the device

and import data directly to your phone.

•

Authorise device/Unauthorise device:

Network (Menu 9.6.2)

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

Use this menu to change the settings for connecting

to your cellular network.

•

Network selection: select to either

•

Delete: remove the selected device or all

devices from the list.

automatically or manually select the network

used when roaming outside of your home area.

You can select a network other than your home

network only if there is a valid roaming

agreement between the two.

Rename: rename the selected device.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

•

Network mode: select the network you use:

2. Select the application in which the item you want

to send is stored.

Automatic: the phone scans for available

networks.

3. Scroll to the item you want and press

GSM 900/1800: the phone operates in the

combined GSM 900/1800 network.

Options>.

4. Select Send name card

task Send Via bluetooth.

/Send schedule/Send

GSM 1900: the phone operates in the GSM

1900 network. This option is only available in the

U.S.A.

→

The phone searches for devices within range and

displays a list of available devices.

UMTS: the phone operates in UMTS (3G

network) networks. You can get a higher speed

connection than on lower generation networks,

and use advanced data and information services,

such as video calls.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s

Bluetooth feature must be active.

If an unauthorised Bluetooth device sends data to

your phone, the phone displays a confirmation

message.

To receive data, press <Yes>.

Menu functions

•

Proxy address/Port: (HTTP only) set the

proxy server address and port.

Secure connection: (WAP only) turn the

secure mode on or off.

Linger time (sec.): set a time period after

which the network is disconnected if there

has been no new data traffic in that time.

Advanced settings: provide you with the

following options:

Connections (Menu 9.6.3)

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

•

Static IP: specify if you want to manually

enter an IP address; see the Local phone

IP option. If you want the IP address to be

automatically assigned by the server, remove

the check mark.

Creating a profile

1. Press <New>, or press <Options> and select

New

2. Specify profile parameters:

Local phone IP: enter the IP address

obtained from the network operator, if you

checked the Static IP option.

•

Set name: enter a profile name.

Access name: edit the access point name

used for the address of the GPRS network

gateway.

Static DNS: specify if you want to manually

enter the Domain Name Server (DNS)

address; see the Server 1/Server 2 option.

•

Auth type: choose the type of

authentication used.

If you want the address to be automatically

assigned by the server, remove the check

mark.

•

User ID: enter the user ID.

Password: enter the user password.

Protocol: select the protocol from WAP

Server 1/Server 2: enter the Domain Name

Server (DNS) addresses.

HTTP, and Other

•

Home URL: enter the URL address of the

page to be used as your homepage.

Gateway address: (WAP only) enter the

gateway address of the proxy server.

Traffic class: select the traffic class.

3. Press <Save> to save the profile.

Using profile options

Camera (Menu 9.7.4)

From the profile list, press <Options> to access the

following options:

Use this menu to change the default settings for

taking photos.ꢀp. 63

•

Edit: edit the selected profile.

New: add a new profile.

Video recorder (Menu 9.7.5)

Use this menu to change the default settings for

Rename: change the profile name.

Delete: delete the profile.

recording video clips.ꢀp. 65

Voice recorder (Menu 9.7.6)

Restore: restore the changed settings to the

default status.

You cannot edit or delete the default connection

profiles.

Use this menu to change the default settings for the

voice recorder.

ꢀp. 36

Media player (Menu 9.7.7)

Use this menu to change the default settings for

Application settings (Menu 9.7)

playing media files in the media player.

ꢀp. 35

You can customise the settings for using applications

available on the phone.

VOD (Menu 9.7.8)

Use this menu to activate a connection profile to be

used for accessing streaming servers to use VOD

(Video on Demand) services. You can also create or

Internet (Menu 9.7.1)

Use this menu to select a connection profile to be

used for accessing the Internet. You can also create

edit a profile.

ꢀp. 74

or edit a profile.

ꢀp. 74

Security (Menu 9.8)

Messages (Menu 9.7.2)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and USIM/SIM card.

Use this menu to change the default settings for

using the message feature.

ꢀp. 49

If you enter an incorrect PIN/PIN2 three times in

succession, the USIM/SIM card is blocked. To

unblock it, you need to enter your PUK/PUK2

(Personal Unblocking Key). The codes are

supplied by your network operator.

Contacts (Menu 9.7.3)

Use this menu to change the settings for using

Contacts. p. 33

ꢀ

Menu functions

Phone lock (Menu 9.8.1)

Privacy lock (Menu 9.8.6)

Use this menu to protect the phone from

unauthorised use. When this feature is enabled, you

must enter a 4- to 8-digit phone password each time

the phone is switched on.

Use this menu to lock access to messages, media

files, call records, or Contacts entries. When a lock

option is enabled, you must enter the phone

password to access the locked items.

The password is preset to 00000000. To change the

password, use the Change phone password

menu.

Change PIN code (Menu 9.8.7)

Use this menu to change your PIN. The PIN lock

feature must be enabled to change the PIN.

SIM lock (Menu 9.8.2)

Change PIN2 code (Menu 9.8.8)

This menu allows your phone to work only with the

current USIM/SIM by assigning a USIM/SIM lock

code. You must enter the USIM/SIM lock code to use

a different USIM/SIM card.

If supported by your USIM/SIM card, use this menu

to change your current PIN2.

Mobile tracker (Menu 9.8.9)

When someone tries to use your phone with another

USIM/SIM card, the phone will automatically send

the preset tracking message to your family or

friends. You can check the phone number from

which the messages are sent and then track your

phone. This feature is useful when the phone is

stolen or lost.

PIN lock (Menu 9.8.3)

The 4- to 8-digit PIN (Personal Identification

Number) protects your USIM/SIM card against

unauthorised use. When this feature is enabled, the

phone requires your PIN each time it is switched on.

Fixed dialling mode (Menu 9.8.4)

1. Enter the phone password and press

If supported by your USIM/SIM card, Fixed Dialling

Number (FDN) mode restricts your outgoing calls to

a limited set of phone numbers. When this feature is

enabled, you can make calls only to phone numbers

stored on the USIM/SIM card.

<Confirm>.

2. Specify the following options:

•

Activation: activate or deactivate the Mobile

tracker feature.

Recipients: specify phone numbers to which

you want to send the tracking messages.

Sender: enter the sender’s name.

Change phone password (Menu 9.8.5)

Use this menu to change your phone password.

•

Messages: check the preset tracking

message text.

Solve problems

3. When you have finished, press <Save>.

Help and personal needs

To save the time and expense of an unnecessary

service call, perform the simple checks in this

section before contacting a service professional.

Memory status (Menu 9.9)

Use this menu to check the amount of memory

being used for storing data, such as Text message,

Multimedia message, Email, Push message, File

manager, Contacts, and Organiser items. You can

also view the amount of shared memory.

When you switch on your phone, the following

messages may appear:

“Please insert SIM card”

•

Be sure that the USIM/SIM card is correctly

installed.

Operator settings (Menu 9.0)

Use this menu to set a service provider according to

the USIM/SIM card you are using.

“Phone lock”

The automatic locking function has been

•

When you select a service provider, the phone will

automatically turn itself off and then back on. You

can then see the profiles corresponding to the

service provider in the connection menus.

enabled. You must enter the phone’s password

before you can use the phone.

“PIN lock”

•

You are using your phone for the first time. You

must enter the PIN supplied with the USIM/SIM

card.

Reset settings (Menu 9.

Use this menu to reset the phone’s settings you

have changed and clear all data you have added.

•

The PIN lock feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN lock menu.

1. Enter the phone password and press

Confirm>.

The password is preset to 00000000. You can

change this password. p. 76

“PUK lock”

The PIN code was entered incorrectly three times

•

ꢀ

in succession, and the USIM/SIM card is now

blocked. Enter the PUK supplied by your service

provider.

2. Press <Yes>. The phone automatically turns

itself off and then back on.

Solve problems

“No service,” “Network failure,” or “Not done”

displays

The phone starts beeping and “Low battery”

flashes on the display

•

The network connection has been lost. You may

be in a weak signal area. Move and try again.

•

Your battery is insufficiently charged. Recharge

the battery.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The audio quality of the call is poor

•

Check the signal strength indicator on the

display ( ). The number of bars indicates the

signal strength from strong ( ) to weak ( ).

You have entered a number but it was not

dialled

•

Try moving the phone slightly or moving closer

to a window if you are in a building.

•

Be sure that you have pressed [ ].

Be sure that you have accessed the right cellular

network.

No number is dialled when you re-call a

Contacts entry

•

Be sure that you have not set an outgoing call

barring option.

•

Use the Search contact feature to ensure the

number has been stored correctly.

Your correspondent cannot reach you

•

Re-store the number, if necessary.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

The battery doesn’t charge properly or the

phone sometimes turns itself off

Be sure that you are accessing the correct

cellular network.

•

Wipe the charging contacts both on the phone

and on the battery with a clean soft cloth.

Be sure that you have not set an incoming call

barring option.

If the above guidelines do not help you to solve

the problem, take note of:

Your correspondent cannot hear you speaking

•

The model and serial numbers of your phone

Your warranty details

•

Be sure that you have switched on the

microphone.

A clear description of the problem

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is

located at the bottom of the phone.

Then contact your local dealer or Samsung after-

sales service.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to

reach the network. In general, the closer you are to a

base station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It

is designed and manufactured to not exceed the limits

for exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part

of comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines were developed by independent scientific

organisations through the periodic and thorough

evaluation of scientific studies. The limits include a

substantial safety margin designed to ensure the safety

of all persons, regardless of age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

Precautions when using batteries

•

Never use a charger or battery that is damaged in

any way.

Use the battery only for its intended purpose.

If you use the phone near the network’s base

station, it uses less power. Talk and standby time are

greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

The exposure standard for mobile phones employs a

unit of measurement known as Specific Absorption Rate

(SAR). The SAR limit recommended by the EU Council is

2.0 W/kg.^*

•

The highest SAR value for this model phone was 0.540

W/kg.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out.

When the operation time is noticeably shorter than

normal, it is time to buy a new battery.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

Health and safety information

•

If left unused, a fully charged battery will discharge

itself over time.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But

an important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when

it is not in use. Do not leave the battery connected

to a charger for more than a week, since

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

overcharging may shorten its life.

•

Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

Do not leave the battery in hot or cold places

because the capacity and lifetime of the battery will

be reduced. Try to keep the battery at room

temperature. A phone with a hot or cold battery may

not work temporarily, even when the battery is fully

charged.

Operating environment

Remember to follow any special regulations in force in

the area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Li-ion batteries are particularly affected by

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a

coin, clip or pen causes a direct connection between

the + and – terminals of the battery (metal strips on

the battery). For example, do not carry a spare

battery in a pocket or bag where the battery may

contact metal objects. Short-circuiting the terminals

may damage the battery or the object causing the

short-circuiting.

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation of

the equipment and for the safety of personnel, it is

recommended that the equipment should only be used

in the normal operating position (held to your ear with

the antenna pointing over your shoulder).

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Vehicles

Electronic devices

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Pacemakers

Posted facilities

Switch off your phone in any facility where posted

notices require you to do so.

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These

recommendations are consistent with the independent

research and recommendations of Wireless Technology

Research. If you have any reason to suspect that

interference is taking place, switch off your phone

immediately.

Potentially explosive environments

Switch off your phone when in any area with a

potentially explosive atmosphere, and obey all signs and

instructions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even death.

Hearing aids

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations

are in progress.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Other medical devices

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains

chemicals or particles, such as grain, dust or metal

powders, and any other area where you would normally

be advised to turn off your vehicle engine.

If you use any other personal medical devices, consult

the manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining

this information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

This phone, like any wireless phone, operates using

radio signals, wireless, and landline networks as well as

user-programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

communications like medical emergencies.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless

phone networks or when certain network services and/

or phone features are in use. Check with local service

providers.

•

For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air

bag inflates.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It

is dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the

operation of the aircraft.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

•

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-

water solution.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such

as a microwave oven, stove, or radiator. The phone

may explode when overheated.

•

Keep your phone and all its parts and accessories

out of the reach of small children and pets. They

may accidentally damage these things or choke on

small parts.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may

cause damage to their eyes.

•

Do not use or store the phone in dusty, dirty areas,

as its moving parts may be damaged.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

If the phone, battery, charger, or any accessory is

not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if necessary, arrange for service.

•

Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the phone,

which may damage the phone’s electronic circuit

boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Index

Calls

call log • 28

contacts • 30

e-m a il • 47, 49

MMS • 45

answering • 24, 27

ba rring • 70

diverting • 69

holding • 25

ABC mode, text input • 23

Active folder • 68

Alarm • 58

SMS • 44, 49

Answering

making • 24

Display

call • 24, 27

redialling • 24

rejecting • 24

transferring • 26

waiting • 70

backlight, set • 69

brightness • 69

icons • 10

language • 68

layout • 10

second call • 25

Anykey answer • 68

Auto redial • 70

Camera

photos • 62

Background image • 69

Backlight time, set • 69

Barring, calls • 70

Battery

settings • 69

videos • 65

CB (Cell Broadcast) messages • 48

Characters, enter • 22

Configuration messages • 45

Connection tone • 67

Contacts

Diverting, calls • 69

DRM (Digital Rights Management) • 53

DTMF tones, send • 26

charging • 7

low indicator • 8

precautions • 79

Bluetooth

E-mails

creating/sending • 43

deleting • 47

settings • 51

viewing • 46

Emergency calls • 82

adding • 31

deleting • 30

editing • 30

finding • 30

receiving, data • 73

sending, data • 73

settings • 72

Broadcast messages • 48

Browser, web • 38

options • 30

speed-dialling • 32

Convertor • 38

Creating messages

e-mail • 43

FDN (Fixed Dialling Number) mode •

File messenger • 42

Folder tone • 67

Calculator • 37

Calendar • 59

Call costs • 29

Call log

MMS with attachments • 42

MMS • 41

SMS • 40

dialled • 28

missed • 28

received • 28

Caller groups • 31

Caller ID • 69

CUG (Closed User Groups) • 70

Games • 57

Greeting message • 69

Date, set • 67

Deleting

Messages

cell broadcast • 48

Phone

care and maintenance • 83

Health and safety • 79

Holding, call • 25

configuration • 45

e-mail • 46

greeting • 69

display • 10

icons • 10

locking • 76

Icons, description • 10

Images, downloaded • 53

Inbox, messages

e-mail • 46

MM S with attachments • 42

MMS • 41, 44

push • 45

password • 76

resetting • 77

switching on/off • 8

unpacking • 6

SMS • 40, 44

SMS/MMS • 44

International calls • 24

Internet • 38

Minute minder • 67

Missed alarm events • 62

MMS messages

Photos

editing • 53

taking • 62

creating/sending • 41, 42

deleting • 45

settings • 49

viewing • 53

PIN, change • 76

PIN2, change • 76

Power on/off tone • 67

Privacy • 76

Problems, solve • 77

Profiles • 66

Java applications • 57

viewing • 44

Mobile tracker • 76

Multiparty-call • 26

Music, downloaded • 55

key tone volume • 67

Keypad tones

selecting • 67

sending/muting • 26

volume • 67

Push messages • 45, 52

Name card • 32

Names

entering • 22

searching • 30

Network selection • 73

Numbers

Received messages

e-mail • 46

MMS/SMS • 44

Recording

videos • 65

voice memos • 35

Redialling

automatically • 70

manually • 24

Resetting phone • 77

Ringer

incoming calls • 67

messages • 67

Road safety • 80

Roaming • 73

Language, select • 68

Last number, redial • 24

Locking

media contents • 76

phone • 76

SIM card • 76

searching • 30

storing • 31

Low battery indicator • 8

Organiser • 58

Outbox, messages • 45

Memory status

contacts • 33

messages • 52

phone • 77

Password

call barring • 70

phone • 76

scheduled things • 62

Index

Voice recorder

playing • 36

recording • 35

Voicemail server • 52

Safety

information • 79

precaution • 1

Security calls • 76

Sent messages • 45

Shortcuts • 68

SIM card

W a iting c a ll • 7 0

Wallpaper • 69

Web browser

access • 38

inserting • 7

locking • 76

bookmarks • 39

World time • 37

SMS messages

creating/sending • 40

deleting • 44, 49

settings • 49

viewing • 44

Sound profiles • 66

Sounds, downloaded • 56

Speakerphone • 26

Speed dial • 32

Switching on/off

microphone • 26

phone • 8

T9 mode, text input • 22

Templates, message • 47

Text, enter • 22

Time, set • 67

Video calls

answering • 27

making • 27

options • 27

setting • 71

Videos

playing • 55

recording • 65

Declaration of Conformity (R&TTE)

For the following product:

GSM900/GSM1800/GSM1900/WCDMA2100 with Bluetooth

Portable Cellular Telephone

(Product description)

SGH-Z540

(Model name)

Manufactured at:

Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung-Buk, Korea, 730-350

(factory name, address )

to which this declaration relates, is in conformity with the following standards and/or other

normative documents.

Safety

EMC

: EN 60950-1:2001

: EN 301 489-01 v1.4.1 (08-2002)

EN 301 489-07 v1.2.1 (08-2002)

EN 301 489-17 v1.2.1 (08-2002)

EN 301 489-24 v1.2.1 (11-2002)

: EN 50360:2001

SAR

EN 50361:2001

Network

: EN 301 511 v9.0.2 (03-2003)

EN 301 908-1 v2.2.1 (10-2003)

EN 301 908-2 v2.2.1 (10-2003)

EN 300 328 v1.4.1 (04-2003)

We hereby declare that [all essential radio test suites have been carried out and that] the above

named product is in conformity to all the essential requirements of Directive 1999/5/EC.

The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of

Directive 1999/5/EC has been followed with the involvement of the following Notified Body(ies):

BABT, Balfour House, Churchfield Road,

Walton-on-Thames, Surrey, KT12 2TD, UK

Identification mark: 0168

The technical documentation kept at:

Samsung Electronics QA Lab.

which will be made available upon request.

(Representative in the EU)

Samsung Electronics Euro QA Lab.

Blackbushe Business Park, Saxony Way,

Yateley, Hampshire, GU46 6GG, UK

2005. 12. 16

Yong-Sang Park / S. Manager

(place and date of issue)

(name and signature of authorised person)

* It is not the address of the Samsung Service Centre. For the address or the phone number of Samsung Service Centre,

see the warranty card or contact the retailer where you purchased your phone.

Depending on the software installed or your service provider or country, some of the descriptions

in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear different from the

illustrations in this guide.

Printed in Korea

Code No.:GH68-08845A

World Wide Web

English (EU). 04/2006. Rev. 1.1

http://www.samsungmobile.com

Sony MSAC M2 User Manual
Sony Ericsson J100i User Manual
Sony CDP XE220 User Manual
Sony 1261 4174 User Manual
Sanyo RL 4920 User Manual
Samsung Spinpiont F1 8MB User Manual
Pyramid Technologies TimeTrax EZ 41304 User Manual
Panasonic P341i User Manual
Panasonic COLOUR TELEVISION CT 27G2U User Manual
Oregon Scientific JM889N User Manual