SGH-x497 Series
P O R T A B L E T r i - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UCEG3_PMilton_101005_F11rev.
GH68-06772A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THEPRODUCT.IN ADDITION,SAMSUNG SHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
5
6
Table of Contents
7
8
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratches or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
Ifnecessary,switch offthephoneby holding down the
key until the power-off image displays.
Remove the battery. To do so:
1. Slide the battery lock toward the top of the phone and
hold it in that position.
2. Lift the battery away, as shown.
3. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
10
Activating Your Phone
Note: When you need to remove the SIM card, slide it, as shown, and take
it out of the socket.
4. Place the battery so that the tabs on the end align with
the slots at the bottom of the phone.
Section 1: Getting Started
11
5. Press the battery down until it clicks into place. Make
sure that the battery is properly installed before
switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
A travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately
200 minutes.
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
12
Activating Your Phone
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by
pressing the buttons on both sides of the connector and
pulling the connector out.
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Warning
Low Battery” message repeats at regular intervals on the
Section 1: Getting Started
13
display. When this happens, your phone turns off the
backlight to conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching On or Off the Phone
1. Open the phone.
2. Press and hold the
key until the phone switches on.
3. If the phone asks you to enter the phone password, enter
the password and press the OK soft key or the key.
Note: Password registration will be done by the user. Users will input the
first password.
4. If the phone asks for a PIN, enter the PIN and press the
The phone searches for your network and after finding it,
the Idle screen appears. Now, you can make or receive
calls.
Note: The display language is preset to Automatic at the factory. To change
When you wish to switch off the phone, press and hold the
the power-off image displays.
key until
14
Setting Up Your Voice Mail
Setting Up Your Voice Mail
All unanswered calls to your phone are automatically
transferred to your voice mail,even ifyour phone is in use
or turned off.Therefore,you willwant to set up your voice
mail and personal greeting as soon as your phone is
activated.
To set up your voice mail:
1. Press and hold
.
2. Follow the system prompts to:
• Create your pass code
• Record your greeting
• Record your name announcement
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Recent Calls and press the key.
3. Highlight Voice Mail and press the key.
4. Highlight Connect to Voice Mail and press the key.
Your phone dials the specified voice mail number.
5. When connected, follow the voice prompts to access
messages.
To access you voice mail from your keypad, use the
following steps:
1. Open the phone to access your keypad.
2. From an Idle screen, press and hold the
key.
3. Follow the voice mail prompts to access messages.
Section 1: Getting Started
15
Changing the Voice Mail Number
Your SIM card gives you default service number of the
voice mail center. However, you may need to change the
number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Recent Calls and press the key.
3. Highlight Voice Mail and press the key.
4. Highlight Voice Server Number and press the key.
Highlight Voice Server 1 and press the Select soft key
or the key. The following options appear in the
display.
• Edit Number: allows you to edit voice mail number.
• Edit Name: allows you to change voice mail number name.
• Delete: deletes voice mail number.
5. Highlight Edit Number and press the Select soft key or
key to change the number. Enter new number.
6. Press the OK soft key to save the update.
7. Press the
key to return to Idle mode.
16
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
Features of Your Phone
Open View of Your Phone
Front View of Your Phone
Keys
Understanding the Display Screen
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
17
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of
the features included in your phone.
User friendly,menu driven access to features and options.
• Instant Messaging capability
• Multimedia capability
• Personal Assistant feature provides calendar, to-do list, alarms,
calculator, and a unit converter.
Open View of Your Phone
The following illustrations show the main elements of
your phone:
18
Front View of Your Phone
Front View of Your Phone
Keys
The following list correlates to with the open and closed
view illustrations.
1.
2.
The headset jack is used for the hands-free headset.
Performs the functions indicated by the screen text on
the bottom line of the display.
3. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
In Menu mode, selects a menu function or stores
information that you have entered, such as a name in
the phone or SIM memory.
4. During a call, adjusts the earpiece volume.
With the phone closed, you can set up or cancel "Silent
mode" by holding down the volume key, located on the
left side of the phone.
5. Enters numbers, letters, and some special characters.
Section 2: Understanding Your Phone
19
6. Enters the asterick [*] character for calling features. In
text entry mode, press to change the character input
type.
7. This connector is used to plug in the charging
accessories.
8. The microphone used during phone calls and voice
memo recordings.
9. Enters the pound [#] character for calling features. In text
entry mode, press to enter a space.
10. Deletes characters from the display.
In Menu mode, returns you to the previous menu level.
When you hold down
key, you can access New
memo in Organize menu directly.
11. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
12. In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
In Menu mode, selects the highlighted menu options.
13. In Menu mode, use to scroll through the menus and
Phone book.
In Idle mode, the Down key allows you to access the
Address Book menu directly.
When entering text, moves the cursor to the left or right,
depending on which side you push.
14. Display area where text and graphics are displayed.
20
Understanding the Display Screen
15. The earpiece is used to listen to audio from your phone.
16. The antenna is used to obtain reception.
17. The external display shows the received signal strength,
the phone battery level, the date and time.
Understanding the Display Screen
The display has 3 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received
.
Appears when you set an alarm to ring at a specified time.
Appears when you are out of your service area.
Appears when a call is in progress.
Section 2: Understanding Your Phone
21
Appears when you are connected to a WAP service.
Appears when the Call Forwarding feature is active. For
Appears when you are connected to the GPRS network.
Appears when Silent mode is active or you set the phone
to vibrate when you receive a call.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or open the phone, the backlight
comes on. It goes off when no keys are pressed within a
given period of time, depending on the setting in the
Backlight Time menu. The display turns off after one
minute to conserve battery power.
To specify the length oftime the backlight is active, set the
Back light menu.
External Display
Your phone has an external display on the front of the
phone. It indicates when you have an incoming call or
message. It also alerts you at a specified time when you
have set an alarm. The backlight turns on and the
corresponding icon appears on the external display.
When you close the phone, the display shows the current
time on a digital clock.
22
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
•
•
Making a Call
Adjusting the Call Volume
Answering a Call
Call Log
Recent Calls
Silent Mode
Selecting Functions and Options
Options During a Call
This section allows you to make or answer a call. It also
includes the features and functionality associated with
making or answering a call.
Section 3: Call Functions
23
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the
3. To clear the whole display, press and hold the
Ending a Call
key.
key.
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the call recipient or caller is
To recall any of these numbers:
24
Making a Call
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4. To dial the number, press the
key.
Before you dial the number, press the Options soft key
to display the following options:
• To see details of the number, press the Options soft key and
select Details. Press the Select soft key or the
key.
• To call back the number, press the Options soft key and select
Call back. Press the Select soft key or the
number is dialed.
key. The
• To save the number to your phone or SIM, press the Options
softkey and select Paste. Press the Select soft key or the
key.
• To send a text or picture message to the number, press the
Options soft key and select Send Message. Press the Select
soft key or the
• To delete the number, press the Options soft key and select
Delete. Press the Select soft key or the key.
• To delete all of the numbers, press the Options soft key and
key.
select Delete all. Press the Select soft key or the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called Address book.
Section 3: Call Functions
25
Once you have stored a number in the Address Book, you
can dialit by pressing a few keys.You can also assign your
most frequently-used numbers to number keys using the
Speed Dial feature.
For further details about the Phone book feature, see
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Press the key to increase the volume level and the key
to decrease the level.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call image.
The caller’s phone number, or name if stored in Phone
book, displays.
1. If necessary, open the phone. Press the
key or the
Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
If the Open to Answer option in the Extra settings
menu is activated, you can answer the call simply by
opening the phone.
26
Call Log
Note: To reject an incoming call, press and hold the Volume keys on the
left side of the phone before opening the phone, or press the Reject soft
key or
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phone book or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Log
All made, received and missed calls are listed in the Call
Log.
1. To access the Call Log option, press the
key. A list of
calls displays.
2. Press the Options soft key to get Details, Call Back,
Paste, Send Message, or Delete the calls.
3. To place a call press the
key.
Recent Calls
In this menu,you can view missed calls,callreceived,and
calls made.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, ifthis service is available,
so that you can call the person back.
The number ofcalls you have missed displays on the idle
screen immediately after a call is missed.
Section 3: Call Functions
27
To view a missed call immediately:
1. If the phone is closed, open the phone.
2. Press the Missed soft key.
The number corresponding to the most recent missed call
displays, if available.
3. To scroll through the missed calls, press the Up or Down
key.
4. To call the number displayed, press the
key.
Viewing Calls Received
Your phone retains information about the last 20
incoming calls and stores them in the Calls Received log.
You can review the Calls Received log for the time and
date of the call, as well as other information.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Recent Calls and then highlight Calls Received
and press the Select soft key or the key. Your list of
Calls Received appear in the display.
3. Use the Up or Down Navigation key to highlight a call,
then press the key to details about your call.
4. Press the Options soft key to display the following
options:
• Call Back: calls the selected number.
• Paste: saves the number to your phone or SIM.
• Send Message: allows you to send a SMS or Multimedia
message to the specified number.
• Delete: erases the selected call from the Calls Made log.
28
Recent Calls
• Delete All: erases the entire Calls Made log.
5. Use the Up or Down Navigation key to highlight an
option.
6. Press the key to perform the option’s function.
Viewing Calls Made
Your phoneretainsinformation about thelast 20outgoing
calls and stores them in the Calls Made log. You can
review the Calls Made log for the time and date ofthe call,
as well as other information.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Recent Calls and then highlight Calls Made and
press the Select soft key or the key. Your list of Calls
Made appear in the display.
3. Use the Up or Down Navigation key to highlight a call,
then press the key to details about your call.
4. Press the Options soft key to display the following
options:
• Call Back: calls the selected number.
• Paste: saves the number to your phone or SIM.
• Send Message: allows you to send a SMS or Multimedia
message to the specified number.
• Delete: erases the selected call from the Calls Made log.
• Delete All: erases the entire Calls Made log.
5. Use the Up or Down Navigation key to highlight an
option.
Section 3: Call Functions
29
6. Press the key to perform the option’s function.
Voice Mail
information.
Delete All
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Recent Calls and then highlight Delete All and
press the Select soft key or the key. The following
selections appear in the display.
• All Calls: deletes all calls.
• Missed Calls: deletes Missed Calls.
• Calls Received: deletes Calls Received.
• Calls Made: deletes Calls Made.
3. Press the Up or Down Navigation key to highlight the
Delete option.
4. Press the Select soft key or the key.
Note: A check mark displays next to the log(s) to be deleted.
5. Press the OK soft key.
6. To confirm deletion, press the Yes soft key or the No key
to return.
30
Recent Calls
Call Time
Call Time allows you to view the duration of your Last
Call, Total Made, and Total Received during the life cycle
of your phone. Call Time is not for billing purposes.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Recent Calls and then highlight Call Time and
press the Select soft key or the key. The options
listed appear in the display.
• Last Call: view the duration of your last call.
• Total Made: view the duration of the Calls Made.
• Total Received: view the duration of the total of your Calls
Received.
• Life time: view the duration of all calls on your phone since
activation (Life time timers cannot be erased).
• Reset Timers: resets timer.
Press the number of the option you wish to enter, or use
the Navigation key to highlight the option and press the
Select soft key or the key.
Data Volume
When using WAP browsing in GPRSmode,Data Volume
tracks kilobytes.
Data Call Time
When using WAP browsing and performing CSD calls,
Data Call Time tracks your connection time.
Section 3: Call Functions
31
Silent Mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode Activated” message and the Mute icon (
)
display.
To exit and reactivate the previous sound settings, press
and hold the key again until “Silent Mode
Deactivated” appears. The Mute icon ( ) no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
and sub-menu allows you to view and alter the settings of
a particular function.
Soft Keys
The roles of the soft keys vary depending on the function
you arecurrently using;thelabelson thebottom lineofthe
display just above each key indicate their current role.
32
Selecting Functions and Options
The following diagram shows the soft key role while in
idle mode.
Selecting Options
To view the various functions and options available and
to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the key.
3. To view the next function or highlight the next option on a
list, press the Down Navigation key.
4. To move back to the previous function or option on a list,
press the Up Navigation key.
5. To move back up one level in the menu structure, press
the key.
6. To exit the menu structure without changing the
settings, press the
key.
Section 3: Call Functions
33
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key or the
key.
When you access a list of options, your phone highlights
the currently active option.If,however,thereare only two
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press Options soft key.
2. Highlight Loud Spkr On and press the Select soft key.
3. To turn the Loud Spkr Off, press Options and select the
Loud Spkr off and press the Select soft key.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call in
progress if your network supports this service.
To place a call on hold, press the Options soft key.
Highlight Hold and press the Select soft key or the key.
You can reactivate the call, by pressing the Resume soft
key.
34
Options During a Call
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Address Book.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or
1. Put the current call on hold by pressing the Hold soft
key.
2. Make the second call in the normal way.
When you havean activate calland a callin hold,you may
switch between the two calls, changing the one on hold to
activate and placing the other on hold.
To switch between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with that
person.
When you want to finish, end each call normally by
pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone
off, so that the other person cannot hear you.
Example: You wish to say something to person in the room, but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Mute soft key.
Section 3: Call Functions
35
2. The other person can no longer hear you.
To switch the microphone back on:
1. Press the Unmute soft key.
2. The other person can hear you again.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the DTMF(DualTone Multi-Frequency)tones of
the keys, which allows you to press keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
Searching for a Number in Address Book During a Call
You can search for a number in Address Book during a
call.
1. Press the Options soft key or the key.
2. Press the Down key to highlight the Address Book
option.
3. Press the Select soft key or the key.
The Phone book entries are listed.
4. Enter the name that you wish to find.
5. If you enter the first few letters of the name, the Phone
book entries are listed starting with the first entry
matching your input.
6. To view the highlighted entry, press the View soft key.
36
Options During a Call
For further details about the Phone book feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call waiting menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
To end a call on hold, press the Options soft key or the
key and select the End held call option.
To end the current call, press the
key.
Making a Multi-Party Call
A multi-party callisa network servicethatallowsup tosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
Section 3: Call Functions
37
3. To join the first participant to the multi-party call, press
the Options soft key or the key and select Join.
Press the OK soft key or the key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the key. Select the Join option and press
the OK soft key or the key.
You can add incoming callers by answering the call and
pressing the Options soft key or the key, and selecting
Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the key and choose the
Select one option. Press the OK soft key or the key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key, the
key, or the key.
3. When the Split option highlights, press the OK soft key
or the key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
4. To return to the multi-party call, press the Options soft
key or the key and select Conference. Press the OK
soft key or the key.
All of the multi-party call participants can now hear each
other.
38
Options During a Call
Dropping One Participant
1. Press the Options soft key or the key and choose the
Select one option. Press the OK soft key or the key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key, the key.
3. Press the Down key to select the Remove option and
press the OK soft key or the key.
The call with that participant ends, but you can continue
to talk to the other participants.
4. When you want to end the multi-party call, close the
phone or press the
key.
Section 3: Call Functions
39
40
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
There are two way for accessing a menu option.
• Navigating through the list.
• Entering the shortcut number of the menu option.
Navigating through the List
1. In Idle mode, press the Menu soft key to access the main
menus.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to select the menu.
3. You can access them by scrolling using the Up and
Down Navigation key and pressing the Select soft key or
the key.
If the menu that you have selected contains further
options, repeat this step.
4. Select an option and press the Select soft key or the
key to confirm the chosen setting
Using Shortcuts
The menu items,such as menus,sub-menus,and options,
are numbered and can be accessed quickly by using their
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
42
Navigation key shortcuts
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
4. Press the
5. Press the
key for Settings.
key for Phone Settings.
key for Language.
key for Text Language.
The languages available display.
Navigation key shortcuts
Some applications can be launched by pressing one of the
four navigation keys (see the illustration) while in the
standby mode.
Section 4: Menu Navigation
43
In Use Menu Outline
Your phone includes both a standby menu and an In-Use
Menu. The In-Use Menu applies to when you are in a call.
1. While in a call press the Options soft key. The following
options appear in the display:
• Loud Spkr On: turns the speaker phone on.
• Hold: allows you to place a caller on hold.
• New Call: allows you to make or accept another call.
• Address Book: accesses the Contact List.
• Text Message: allows you to send a text message to your caller.
• Mute Keys: allow you to turn the key tones off or on. If the Mute
keys option is selected, your phone does not transmit the DTMF
(Dual Tone Multi-Frequency) tones of the keys, which allows
you to press keys without hearing annoying key tones during a
call
• Send DTMF: send your phone number as tones (if you’re the
recipient of the call). Send the recipient’s phone number as
tones (if you’re the originator of the call).
2. Use the Up or Down Navigation keys to highlight an
option. Press the Select soft key to select the In-Use
Menu of your choice.
44
Menu Outline
Menu Outline
The following list shows the menu structure and
indicates the number assigned to each option.
1. Recent Calls
1.1 Missed Calls
1.2 Calls Received
1.3 Calls Made
1.4 Voice Mail
1.4.1 Connect to Voice Mail
1.4.2 Voice Server Number
1.5 Delete All
1.6 Call Time
1.6.1 Last Call
1.6.2 Total Made
1.6.3 Total Received
1.6.4 Life time
1.6.5 Reset Timers
1.7 Data Volume
1.7.1 Recent Volume
1.7.2 Total Volume
1.7.3 Reset Volume
1.8 Data Call Time
1.8.1 Recent Time
1.8.2 Total Time
Section 4: Menu Navigation
45
1.8.3 Reset Timers
2. Messaging
2.1 IM
2.2 Text Message
2.2.1 Create
2.2.2 Inbox
2.2.3 Outbox
2.2.4 Delete All
2.3 Multimedia Message
2.3.1 Create
2.3.2 Inbox
2.3.3 Outbox
2.3.4 Draft
2.3.5 Delete All
2.4 Browser Messages
2.4.1 Inbox
2.4.2 Setting
2.4.3 Delete All
2.5 Templates
2.6 Broadcast Messages*
2.7 Chat
2.8 Settings
2.8.1 Text Message
2.8.1.1 Service Center
46
Menu Outline
2.8.1.2 Validity Period
2.8.1.3 Message Type
2.8.1.4 Reply Path
2.8.1.5 Delivery Report
2.8.1.6 Character Support
2.8.2 Multimedia Message
2.8.2.1 Send Settings
2.8.2.1.1 Priority
2.8.2.1.2 Validity Period
2.8.2.1.3 Delivery After
2.8.2.1.4 Delivery Report
2.8.2.1.5 Read Reply
2.8.2.2 Receive Settings
2.8.2.2.1 Msg. Reception
2.8.2.2.2 Anonymous Reject
2.8.2.2.3 Ads Reject
2.8.2.2.4 Report Allowed
2.8.2.3 Multimedia Message Profiles
2.8.2.3.1 Current Profile
2.8.2.3.2 Profile Setting
2.9 Memory Status
2.9.1 Text Message
2.9.2 Multimedia Message
Section 4: Menu Navigation
47
3. Games & Applications
3.1 Games
3.1.1 Shop Games
3.1.2 My Games
3.1.3 Settings
3.1.3.1 APN
3.1.3.2 Login ID
3.1.3.3 Password
3.1.3.4 DNS Settings
3.1.4 Memory Status
3.2 Alarm
3.3 Organizer
3.3.1 New Memo
3.3.2 Calendar
3.3.3 To Do List
3.4 Calculator
3.5 Record Audio
3.5.1 Record
3.5.2 Recorded Audio
3.5.3 Delete All
3.5.4 Settings
3.5.4.1 Recording Time
3.5.4.2 Volume
3.5.4.3 Default Name
48
Menu Outline
3.5.5 Memory Status
3.6 Unit Conversion
3.6.1 Length
3.6.2 Weight
3.6.3 Volume
3.6.4 Area
3.6.5 Temperature
3.7 Timer
3.8 Stopwatch
3.9 World Time
4. MEdia Mall
4.1 Shop Ringtones
4.2 Shop Games
4.3 Shop Graphics
4.4 Shop Multimedia
4.5 Shop Applications
4.6 MEdia Home
5. MEdia Net
5.1 MEdia Net Home
5.2 Favorites
5.3 Go to URL
5.4 Browser Profiles
5.4.1 Current Profile
5.4.2 Profile Settings
Section 4: Menu Navigation
49
5.5 Clear Cache
6. IM
7. My MEdia
7.1 Graphics
7.1.1 Shop Graphics
7.1.2 Downloaded Graphics
7.2 Audio
7.2.1 Shop Ringtones
7.2.2 Downloaded Ringtones
7.2.3 Record Audio
7.2.4 Recorded Audio
7.3 Delete
7.3.1 Graphics
7.3.2 Audio
7.4 Memory Status
8. Address Book
8.1 Contact List
8.2 FDN List
8.3 New Entry
8.3.1 Phone
8.3.2 SIM
8.3.3 SIM (FDN)
8.4 Speed Dial
50
Menu Outline
8.5 Copy All to Phone
8.6 Delete All
8.7 Own Number *
8.7.1 Voice Line 1
8.7.2 Voice Line 2
8.7.3 Data
8.7.4 Fax
8.8 Group Setting
8.8.1 Family
8.8.1.1 Ringtone
8.8.1.2 Edit Name
8.8.1.3 View Image
8.8.2 Friends
8.8.2.1 Ringtone
8.8.2.2 Edit Name
8.8.2.3 View Image
8.8.3 Partnership
8.8.3.1 Ringtone
8.8.3.2 Edit Name
8.8.3.3 View Image
8.8.4 Office
8.8.4.1 Ringtone
8.8.4.2 Edit Name
8.8.4.3 View Image
Section 4: Menu Navigation
51
8.8.5 Other
8.8.5.1 Ringtone
8.8.5.2 Edit Name
8.8.5.3 View Image
8.9 Memory Status
8.0 Service Number
9. Settings
9.1 Time & Date
9.1.1 Set Time
9.1.2 Set Date
9.1.3 Time Format
9.1.4 Auto Update
9.2 Phone Settings
9.2.1 Language
9.2.1.1 Text Language
9.2.1.2 Input Mode
9.2.2 Greeting Message
9.2.3 Extra Settings
9.3 Display Settings
9.3.1 Wallpaper
9.3.1.1 Shop Graphics
9.3.1.2 Animations
9.3.1.3 Graphics
52
Menu Outline
9.3.1.4 Text Position
9.3.1.5 Text Color
9.3.2 Skin
9.3.3 Backlight Time
9.3.4 Brightness Control
9.3.4.1 Main LCD
9.3.4.2 External LCD
9.3.5 Dialing Font Color
9.4 Sound Settings
9.4.1 Incoming Calls
9.4.1.1 Shop Ringtones
9.4.1.2 Default Ringtones
9.4.1.3 My Audio
9.4.1.4 Ring Volume
9.4.1.5 Alert Type
9.4.2 Keypad Tone
9.4.2.1 Default Keypad Tone
9.4.2.2 Volume
9.4.3 Message Tone
9.4.3.1 Text Message
9.4.3.1.1 Tone
9.4.3.1.2 Alert Type
9.4.3.1.3 Repetition
Section 4: Menu Navigation
53
9.4.3.2 Multimedia Message
9.4.3.2.1 Tone
9.4.3.2.2 Alert Type
9.4.3.2.3 Repetition
9.4.4 Power On/Off
9.4.5 Silent Mode
9.4.6 Extra Tone
9.5 Network Services
9.5.1 Call Forwarding
9.5.2 Call Waiting
9.5.3 Network Selection*
9.5.4 Caller ID
9.6 Security
9.6.1 PIN Check
9.6.2 Change PIN
9.6.3 Phone Lock
9.6.4 Change Password
9.6.5 Privacy
9.6.6 SIM Lock
9.6.7 FDN Mode*
9.6.8 Change PIN2*
9.7 Reset Settings
9.7.1 All
9.7.2 Phone Settings
54
Menu Outline
9.7.3 Display Settings
9.7.4 Sound Settings
* Shows only if supported by your SIM card.
Section 4: Menu Navigation
55
56
Section 5: Entering Text
Topics Covered
•
•
•
•
•
•
Changing the Text Input Mode
Using T9 Mode
Using Alphabet Mode
Keys
Using Symbols
Using Numbers
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the amount of key strokes
associated with entering text.
Section 5: Entering Text
57
Changing the Text Entry Mode
When using your phone,you willoften need to enter text,
such as when storing a name in the Address Book,
creating your personal greeting or scheduling events on
your calendar. You can enter alphanumeric characters by
using your phone’s keypad.
Your phone has the following text input modes:
ABC mode
This mode allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once,
twice, three, or four times until it displays.
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, pressing the
key can
enter J, K, or L. However, the T9 mode automatically
compares the series of keystrokes you make with an
internal linguistic dictionary to determine the most likely
word, thus requiring far fewer keystrokes than the
traditional Alphabet mode.
Symbolic mode
This mode allows you to enter symbols, such as
punctuation marks.
Number mode
This mode allows you to enter numbers.
Add Word
Allows you to add a word to message and to T9.
58
Changing the Text Entry Mode
Language Select
Allows you to change the language being used in T9
input mode.
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Text input mode
indicator
1. To select change the text input mode, press the key.
2. Highlight the input option, and press the Select soft key
or the key.
3. Choose from the following options:
•
•
: ABC mode
: T9 mode
• Symbolic
•
: Number
• Add Word
• Language Select
Section 5: Entering Text
59
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the
once for each letter.
Example: To enter “Hello” press
to
keys. Press each key only
H
E
L
L
O
The word that you are typing appears in the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
or the Up or Down key to display alternative word
choices for the keys that you have pressed.
key
Example: Both “Of” and “Me” have the
and
keys. The phone
displays the most commonly used choice first.
4. Insert a space by pressing the
key and start
entering the next word.
60
Using Alphabet Mode
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the key or the Up or Down key
to display the alternative words.
2. When you press the
key or the Up or Down key at
the last alternative word, the display shows Add on the
bottom line. Press the Spell soft key or the key.
3. If necessary, clear the word using the
key and
enter the word you want to add using ABC mode. See
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, or apostrophes, press the
T9 mode applies grammar rules to ensure that correct
punctuation is used.
key.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Left and Right keys. To
delete letters, press the
to clear the display.
key. Press and hold the
key
Using Alphabet Mode
To use theAlphabet Mode use the
your text.
to
keysto enter
1. Press the key labeled with the letter you want:
Section 5: Entering Text
61
• Once for the first letter
• Twice for the second letter
• Andsoon
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
62
Entering Symbols
Entering Symbols
Symbolmodeallowsyou to enter symbolsby pressing the
key labeled with the letter you want. When in a text
message screen, press the
soft key to access the
Symbol mode. The Symbol screen displays the available
symbols for each key. Use the Up or Down Navigation
keys to cycle through all available symbols.
1. To select a symbol, press the corresponding number
key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the
key. When the
input field is empty, this key returns the display to the
previous mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the key.
Using Numbers
Number mode allows you to enter numbers by pressing
the key labeled with the number you want.When in a text
message screen, press the
Number mode.
soft key to access the
Section 5: Entering Text
63
64
Section 6: Understanding Your Address
Book
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
Adding a New Address Book Entry
Finding an Address Book Entry
Editing an Existing Address Book Entry
Dialing a Number from the Address Book
Dialing a Number from the SIM Card
Speed Dialing
Copy All to Phone
Delete All
OwnNumber
Group Setting
Memory Status
Service Dialing Number
This section allows you to manage your daily contacts by
storing their name and number in your Address Book.
Address Book entries can be sorted by name, entry, or
group.
Section 6: Understanding Your Address Book
65
Adding a New Address Book Entry
There are two ways to store a number:
• Using the Save soft key or the key in the idle mode
• Using the New Entry option in the Address Book menu
Storing a Number in Idle Mode
1. Enter the number you want to store and press the Save
soft key.
Note: If you make a mistake while entering a number, correct it using the
key.
2. Select a Save To location and press the Select soft key
or the key.
The following Save To locations are available:
• Phone: allows you to save contact to your phone
• SIM: allows you to save contact to your SIM
• SIM (FDN): allows you to restrict your outgoing calls to a limited
set of phone numbers.
Note: When you change phones, any numbers stored in your SIM card
memory are automatically available with the new phone, whereas any
numbers stored in the phone’s memory will need to be re-entered.
3. Select an icon to identify the category in which the
number is to be stored. Use the Up or Down Navigation
key to highlight the type and press the Select soft key or
the key.
•
•
Mobile: assigns the number entered to the Mobile entry.
Home: assigns the number entered to the Home entry.
66
Adding a New Address Book Entry
•
•
•
Office: assigns the number entered to the Office entry.
Fax: assigns the number entered to the Fax entry.
Other: allows you to enter more detailed information for the
entry.
4. Enter a name to associate with the number.
To use the Entry Options press the Right soft key. For
further details about how to enter characters See
5. Press OK soft key or the key to store the name and
number. After storing, the phone displays the phone
number and name you just stored.
6. To dial the number, press the
key.
7. To return to the idle screen, press the
.
Storing a Number Using the New Entry Option
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Select New Entry.
3. Select a Save To location, then press the Select soft
key or the key.
Three available categories:
• Phone: allows you to save contact to your phone
• SIM: allows you to save contact to your SIM
• SIM (FDN): allows you to restrict your outgoing calls to a limited
set of phone numbers.
Section 6: Understanding Your Address Book
67
Note: When you change phones, any numbers stored in your SIM card
memory are automatically available with the new phone, whereas any
numbers stored in the phone’s memory will need to be re-entered.
4. Select an icon to identify the category in which the
number is to be stored. To select the category, press the
Up or Down Navigation key and press the Select soft
key or the key.
•
•
•
•
•
Mobile: assigns the number entered to the Mobile entry.
Home: assigns the number entered to the Home entry.
Office: assigns the number entered to the Office entry.
Fax: assigns the number entered to the Fax entry.
Other: allows you to enter more detailed information for the
entry.
•
E-Mail: allows you to enter an e-mail address for the
number entered.
5. Enter the number and press the Save soft key or the or
the key.
6. Enter the contact name and press the OK soft key or the
key.
Press the Options soft key to display options menu. For
7. To return to the Idle screen, press the
key.
Storing a Number to the SIM Memory
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
68
Adding a New Address Book Entry
2. Scroll to New Entry by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Select SIM and press the Select soft key.
4. Enter a number you want to store and press the Save
soft key or the key.
5. Enter a name and press the OK soft key or the key.
For further details about how to enter characters, see
After storing, the phone displays the Address Book entry
number you just created
6. Select the SIM memory location, using the alphanumeric
keypad and press the OK soft key or the key.
7. Press the Options soft key to display options menu. For
8. To return to the Idle screen, press the
key.
Storing a Number to the SIM (FDN) Memory
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Scroll to New Entry by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Select SIM (FDN) and press the Select soft key.
4. Enter your PIN2 number and press the OK soft key.
Section 6: Understanding Your Address Book
69
5. Enter a number you want to store and press the Save
soft key or the key.
6. Enter a name and press the OK soft key or the key.
After storing, the phone displays the Address Book entry
number you just created
7. Select the SIM memory location, using the alphanumeric
keypad and press the OK soft key or the key.
8. Press the Options soft key to display options menu. For
9. To return to the Idle screen, press the
key.
Using Address Book Entry Options
Whileviewing any AddressBook entry,presstheLeft soft
key to use the options for the entry.
The following options are available:
• Edit Number: allows you to edit the number.
• Edit Name: allows you to edit the name.
• Send Message: allows you to send a message to the selected
number.
• Copy: allows you to copy the number to another location. You
can select the memory location, either SIM or Phone, and the
location number.
• Delete Entry: allows you to delete the name and number from
Address Book. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key.
70
Finding an Address Book Entry
Finding an Address Book Entry
You can store phone numbers and their corresponding
names in your SIM card or phone. They are physically
separate but are used as a single entity, called Address
Book.
Depending on your SIM card, the maximum number of
phone numbers the SIM card can store may differ.
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Using the Up or Down Navigation key highlight Contact
List and press the Select soft key or the key.
3. Enter the first few letters of the name.
The Address Book entries are listed, starting with the
first entry matching your input.
4. To view the highlighted entry, press the View soft key.
5. Press the
key to dial the number, or press the Left
soft key to access the Address Book entry options.
Section 6: Understanding Your Address Book
71
Editing an Existing Address Book Entry
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Using the Navigation key highlight Contact List and
press the Select soft key or the key.
3. Using the Up or Down Navigation key select the Contact
you would like to edit and press the View soft key.
4. Press the Options soft key to display options menu. For
Using the Navigation key highlight the Option and press
the Select soft key.
5. When your finished editing the Contact, press the OK soft
key. Your changes are saved and a confirmation
message appears.
Dialing a Number from Address Book
Once you have stored phone numbers in the Address
Book, you can dial them easily and quickly by using the
location numbers that were assigned to them in the
Address Book.
Note: If you cannot remember a location number, you must go into the
Contact List in the Address Book menu to search for the entry by name.
72
Dialing a Number from the SIM Card
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the key.
The list of entries in the SIM card appears, with the
desired number highlighted.
2. You can press the Up or Down key to find other numbers
on the list.
3. Press the Dial soft key, the
key, or the key when
you have selected the number you want.
Speed Dialing
Onceyou have stored phonenumbers from your Address
Book list, you can set up to 8 speed dial entries and then
dial them easily whenever you want, simply by pressing
the associated numeric key.
Setting Up Speed Dial Entries
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Scroll to Speed Dial by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Select the key to which you wish to assign the speed-
dialing number, from the
to
keys., and press
the Select soft key or the key.
Note: Memory location 1 is reserved for your Voice mail server number.
Section 6: Understanding Your Address Book
73
4. Highlight Edit Number and press the Select soft key or
the key. Enter a number or press the Names soft key.
Highlight Contact List and press the Select soft key to
display entries in the Contact List.
5. Select an entry from the Contact List and press the
View soft key or the key.
6. Press the Select soft key or the key.
7. Press the OK soft key or the key.
Editing the Speed Dial List
You can edit the speed dial list by changing the number
assignment to a key or deleting all of the entries on the
speed dial list.
Changing a Number Assigned to a Key
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
2. Select Speed Dial and select the key you want to
change.
3. Using the Up or Down Navigation key highlight Speed
Dial location you would like to edit and press the Select
soft key.
4. Select Edit Number and press the Select soft key. Using
the alphanumeric keypad edit number and press OK.
5. When you have finished, press the
key.
Deleting Speed Dial Entries
1. In idle mode press the Menu soft key. Select Address
Book and press the Select soft key or the key.
74
Copy All to Phone
2. Select Speed Dial then select the number assigned key
you want to delete.
3. Using the Up or Down Navigation key highlight the
Speed Dial location to be deleted and press the Select
soft key.
4. Using the Up or Down Navigation key highlight Delete
and press the Select soft key.
5. Press the Yes soft key to confirm the deletion.
6. When you have finished, press the
key.
Copy All to Phone
Copy All to Phone copies all information from the SIM
memory to the phone memory.
1. When the Idle screen displays, press the Menu soft key.
Highlight Address Book and press the Select soft key
or the key.
2. Select Copy All to Phone and press the Select soft key
or the key. Press Yes to copy or No to cancel.
Delete All
You can delete all your entries from your phone’s
memory, your SIM card, or both.
1. When the Idle screen displays, press the Menu soft key.
Highlight Address Book and press the Select soft key or
the key.
2. Scroll to Delete all by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
Section 6: Understanding Your Address Book
75
3. To place a check mark by the memory location you want
to empty.
• All
• SIM
• SIM(FDN)
• Phone
Press the Select soft key or the key.
You can remove the check mark by pressing the Select
soft key or the key.
4. Press the OK soft key to delete the entries in the selected
memory location. A confirmation displays. Press Yes to
confirm deletion or No to cancel.
5. Enter the phone password and press the OK soft key or
the key.
Note: The password registration will be done by the user.
6. When you are finished, press the
key or the
key.
Own Number
This function is a memory aid,which you can use to check
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any affect the actual subscriber numbers on your SIM
card.
1. When the Idle screen displays, press the Menu soft key.
76
Group Setting
Highlight Address Book and press the Select soft key or
the key.
2. Select the Own Number option by pressing the Up or
Down key and press the Select soft key or the key.
3. Highlight Edit Number and press the Select soft key or
the key. Enter the phone number you want and press
the OK soft key or the key.
4. Highlight Edit Name and press the Select soft key or the
key. Enter the name and press the OK soft key or the
key.
5. Highlight Delete and press the Select soft key or the
key. Select Yes to confirm deletion or No to cancel.
Group Setting
1. When the Idle screen displays, press the Menu soft key.
Highlight Address Book and press the Select soft key
or the key.
2. Scroll to Group Setting by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Scroll through the group list by pressing the Up or Down
Navigation key.
4. When the group you want highlights, press the Select
soft key or the key.
5. Select each option and change the settings, as required.
The following options are available:
• Ring tone: allows you to set the ring tone to be used when you
receive a voice call from a member of that group.
Section 6: Understanding Your Address Book
77
• Edit Name: allows you to rename the selected group setting.
• View Image: allows you to view the graphic displayed when you
receive a voice call from a member of that group.
6. When you are finished, press the
key or the
key.
Memory Status
Memory Status allows you to check how many Address
Book entries are saved in your SIM card or internal phone
memory.
1. When the Idle screen displays, press the Menu soft key.
Highlight Address Book and press the Select soft key or
the key.
2. Select the Memory status option by pressing the Up or
Down key and press the Select soft key or the key.
3. Displayed are the total numbers stored in the Phone and
SIM and SIM (FDN).
4. When you are finished, press the
soft key or the
key.
Service Dialing Number
You can view the list of Service Dialing Numbers (SDN)
assigned by your service provider. These numbers
include emergency numbers, directory enquiries and
voice mail numbers.
1. When the Idle screen displays, press the Menu soft key.
Highlight Address Book and press the Select soft key or
the key.
78
Service Dialing Number
2. Select the Service Number option by pressing the Up or
Down key and press the Select soft key or the key.
3. Scroll through the numbers by using the Up or Down
key.
4. To dial the number displayed, press the Select soft key
or the key.
Note: This menu is available only when your SIM card supports Service
Dialing Numbers.
Section 6: Understanding Your Address Book
79
80
Section 7: Messaging
Topics Covered
•
•
•
•
•
•
•
•
•
•
Types of Messages
Using Instant Messenger
Text Message
Multimedia Message
Browser Message
Using Message Template
Broadcast Message
Chat
Settings
Checking Memory Status
This section allows you to send or receive different types
ofmessages.Italsoincludesthefeaturesand functionality
associated with messaging.
Section 7: Messaging
81
Type of Messages
Your phone provides the following message types:
• Instant Messages (IM)
• Text Messages
• Multimedia Messages
• Browser Messages
• Broadcast Messages (SIM Dependent)
Using Instant Messenger
Instant Messenger (IM) is a way of sending short, simple
messages that are delivered immediately to users online
at the moment.
Before using this feature, you need to subscribe to a
messenger service.For further details,contact our service
provider.
Note: Your phone is set to use your service provider’s messenger service
by default. You can change the configurations for Instant Messenger, such
as the default community or auto sign on.
Start Your Messenger
Note: The x497 handset supports the following Instant Messaging
Applications: AIM, ICQ, and Yahoo.
1. In Idle mode, press the IM soft key
Alternatively, press the Menu soft key to access Menu
mode. Select IM and press the Select soft key or the
key.
82
Text Messages
2. Highlight your established IM application and press the
Select soft key or the key.
3. Enter your Logon ID (this field title will change reflect the
name used in each instant message application) and
your Password and press Options soft key and select
Sign On and press the Select soft key.
Note: Use the Down Navigation key to the Save password and/or Auto-
Sign On option and press the key.
4. Select the person you want to talk to.
5. Start the conversation with the person as you would on a
normal messenger for a PC.
6. When you want to end the conversation, press the Exit
soft key or Press the Menu soft key and select Sign Out.
Menu Options
Note: Menu items may vary depending on your IM provider.
Viewing the Conversation Log
You can view the log of your conversations in the Instant
messenger Saved History.
Online or offline, press the Options soft key and select
Saved History.
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Section 7: Messaging
83
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Create
Creating and Sending a Simple Text Message
In this menu, you can write and send text message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging. Highlight Text Message and press
the Select soft key or the key.
3. Select Create and press the Select soft key or the
key.
4. Create your message.
5. When you have finished writing the message, press the
Options soft key. Choose from the following options:
• Send: allows you to send the message. The message is deleted
after sending.
• Text Formatting: allows you to format the style of the text.
For the Size attribute, Normal, Large, and Small size are
available. Mode options are Normal, Underscore, and Strike
through. Bold and Italic options are On or Off. Alignment options
are Left, Center, and Right.
84
Text Messages
• Add Media: allows you to add a picture, melody, or animation to
your message. Select the category of the item to be added. In
each category, you can select from the various factory-set
items or choose an item received from other sources, such as
the Internet or other phones.
• Templates: allows you to apply one of the preset message
templates to the text. Select one of the 10 items stored in the
Templates menu.
• Save Message: allows you to save a copy of the message to the
Phone or SIM card.
• Add from Favorites: allows you add favorite book marked URL’s.
6. Select Send to send the message. Continue to the next
step. The Address screen displays.
Alternatively, select Save Message to save the message
in the Outbox folder.
Note: For details about using other options, see the next page.
7. Enter a destination number or press the Names soft key
to select a contact from the Contact List. Press the
Select soft key to display the contact number and press
the Select soft key or the key. The Send screen
displays.
If you want to send the message to multiple destinations,
scroll to the next location and press the Select soft key.
8. When you have finished entering destination numbers,
press the Send soft key.
Inbox
This message box is used to store messages that you have
received.
Section 7: Messaging
85
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Address book.
1. Select a text message from the list and press the
Options soft key. The following options display.
• View: read the text message.
• Reply: create a new message to reply with.
• Forward: allows you to send/resend the message.
• Delete: deletes the text message.
• Call back: dials the number that sent the text message.
2. Highlight the View option and press the Select soft key
or the key to read the message contents.
3. To scroll through the contents, press the Up or Down
key.
4. To scroll to the previous or next message, press the Left
or Right key.
While viewing a message, you can choose the following
options by pressing the Options soft key:
• Reply: allows you to send a reply to the sender by sending a text
message.
• Forward: allows you to send/resend the message.
• Delete: allows you to delete the message.
• Call Back: allows you to call the sender.
• Move to Phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
86
Text Messages
• Extract Address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
Outbox
This message box is used to store messages that you have
sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Address book.
1. Select a text message from the list and press the
Options soft key.
Options available are:
• View: read the text message.
• Delete: deletes the text message.
• Send: allows you to send the text message.
2. Highlight the View option and press the Select soft key
or the key to read the message contents.
3. To scroll through the contents, press the Up or Down
key.
4. To scroll to the previous or next message, press the Left
or Right key.
While reading a message, you can choose the following
options by pressing the Options soft key:
• Delete: allows you to delete the message.
• Extract Address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
Section 7: Messaging
87
• Send: allows you to send the text message.
• Move to SIM: allows you to move the message from the phone’s
memory to the SIM card. This option is only available for
messages stored in the SIM card.
Delete All
This menu allows you to delete all of the text messages in
each message box. You can also delete all of your
messages at one time.
1. From the Text Message menu, select Delete All.
2. Select All Messages.
To place or remove a check mark, press the Select soft
key or the key.
3. Press the OK soft key to delete all messages in the
message folders.
4. Press the Yes soft key to confirm deletion.
5. When you have finished, press the
key.
Multimedia Message
When you write a text message, the phone automatically
splits it into severalmessages ifyour message exceeds the
maximum number ofcharacters allowed for sending.The
number of split messages to be sent is shown each time
your message is split. Depending on your service
provider, the maximum number of characters may vary.
Create
In this menu, you can write and send a multimedia
message.
88
Multimedia Message
Creating and Sending a Multimedia Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging. Highlight Multimedia Message and
press the Select soft key or the key.
3. Select Create and press the Select soft key or the
key.
4. Create your message.
5. Use the Up or Down Navigation key to highlight a menu
option and press the Add soft key or the key to add
the option.
• Subject: allows you to enter text for the subject.
• Picture: allows you to add a photo or Downloads to add one
of the graphics stored in your graphics folder.
• Sound: allows you to add a sound file. Select Record Audio
to record a new voice memo or My Audio to add one of the
voice memos or sound clips stored in the phone’s memory.
For further details about recording a voice memo, see
sounds if they are in correct format and your service
provider supports them.
• Message: enter the message text and press the key.
While entering text, you can add a message template by
pressing the Options soft key.
6. Press the Opt. soft key to access the following options:
Note: When you add media items to a message, the number of characters
you can enter decreases.
• Preview: shows the message you created.
Section 7: Messaging
89
• Send: allows you to send message to specified number.
• Add Page: allows you to add an additional page(s).
• Page Timing: page timing allows you to set how long each page
of the Picture Messaging message is displayed. The default
time is 5 seconds, maximum 99 seconds.
• Text Effect: allows you to format the style of the text.
For the Color attribute, Black, Blue, Green, Red, and Yellow are
the colors available. For the Size attribute, Small, Medium, and
Large sizes are available. For the Style attribute, Bold, Italic,
and Underline are available.
• Clear Subject: clears subject from your message.
• Delete Page: deletes the page from your message.
• Save Message: allows you to save the message to Draft.
• Settings: allows you to set message parameters.
7. Complete the message, and send or save it by following
Inbox
Retrieving New Messages
While text messages from other phones are delivered
directly to your phone,MMSmessages and emails willbe
stored in the Inbox of the message server and the server
will alert you to new messages. Therefore you need to
retrieve new messages to your phone and read them on
the phone.
90
Multimedia Message
Retrieving an MMS Message
When you receive a new MMS message, the display
shows the MMS Message icon ( ) and a notifying text
message.
1. Press the View soft key or the key to view the
sender’s phone number. The Inbox displays
2. Press the Select soft key or press the key to view
message.
To scroll through the message, press the Up or Down
Navigation keys.
3. When you have finished, press the
Outbox
key.
When you access this menu, the list of multimedia
messages that you have sent or saved displays. The icons
on the left tell you the status of each message:
1. Select a message on the list and press the Select soft
key or the key.
The message displays and scrolls to the next page, if it
has more than one, after a specified time.
2. To scroll through the message, press the Up or Down
Navigation key.
If the message has more than one page, you can scroll
through the pages by using the Left and Right
Navigation keys.
While viewing a message, you can choose the following
options by pressing the Opt. soft key:
• Delete: allows you to delete the message.
Section 7: Messaging
91
• Replay: allows you to replay the message from the beginning.
• Send: allows you to send/resend the message.
• Properties: shows you information about the message, such as
the time and date, to (recipient number), size, priority, and
class.
Draft
After creating a multimedia message, you can store it in
this message box to be sent at a later time.
For further details about viewing a message in the
Delete All
This menu allows you to delete all of the text messages in
each message box. You can also delete all of your
messages at one time.
1. From the Multimedia Message menu, select Delete All.
2. Press the Up or Down key to select a Delete All
parameter.
3. To place or remove a check mark, press Select soft key
or the key.
4. Press the OK soft key to delete the marked objects.
5. When the phone asks for confirmation, press the Yes
soft key.
6. When you have finished, press the
key.
Using Message Options
While viewing a message, press the Opt. (Options) soft
key to access the following options:
92
Multimedia Message
Options for SMS Messages
• Reply: allows you to reply to the message received
• Forward: allows you to forward the message to another
destination.
• Delete: deletes the currently selected message.
• Call Back: allows you to dial the number that the message has
listed.
• Move to Phone: allows you to move the message to the Phone
or SIM card’s memory.
• Extract Address: allows you to save the address from which the
message originated.
Options for Multimedia Messages
• Delete: deletes the message.
• Replay: allows you to replay the Sound from the message
received.
• Reply: allows you to reply to the destination from which the
message originated. Choose from Reply via Text Message or
Reply via Multimedia Message.
• Reply All: allows you to reply to all addresses listed in the
recipient list.
• Forward: allows you to forward the message to another
destination. You may Add Subject or simply Send.
• Call Back: allows you to dial the number from which the
message was originated.
• Save Media: allows you to save the Picture, or Sound from the
message received.
• Extract Address: allows you to extract the recipient or sender’s
number or address, and URL, email addresses or phone
numbers from the message text so that you can make a call,
send an SMS message, or save them in your phone’s memory.
Section 7: Messaging
93
• Properties: shows you information about the message.
Browser Message
This menu allows you to receive web messages from the
server, or to set the phone not to receive Web messages.
The following options are available:
• Inbox: allows you to read the messages received from the web
server.
• Setting: allows you to set whether or not your phone receives
web messages.
• Delete all: allows you to delete all of the web messages.
Using Message Templates
Your phone has message templates to allow you to
retrieve them when creating a message. You can change
the templates as your preferences or send a message
immediately.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging. Highlight Templates and press the
Select soft key or the key.
3. Select a template and press the Select soft key to
access the following options:
• Edit: allows you to change the template.
• Send Message: allows you to send an SMS message using the
template.
• Delete: deletes the template.
4. When you have finished, press the
key.
94
Broadcast Messages (SIM Dependent)
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic. Cell
Broadcast (CB) messages display as soon as they are
received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable.
• the message channel is currently active on the channel list.
Chat
Chat allows you to participate in a synchronous exchange
of remarks with one or more people using your handset.
Settings
You can set up various options for using messaging
services.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Messaging and highlight Settings. Press the
Select soft key or the key.
3. Select the type of messages for which you want to
change. Press the Select soft key or the key.
Text Message
The following options are available:
• Service Center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Section 7: Messaging
95
• Validity Period (SIM dependent): allows you to set the length of
time your text messages are stored at the message center
while attempts are made to deliver them.
• Message Type (SIM dependent): allows you to view the type of
message sent.
• Reply Path (SIM dependent): allows the recipient of your
message to send you a reply message using your message
center, if your network supports this service.
• Delivery Report (SIM dependent): allows you to activate or
deactivate the report function. When this function is activated,
the network informs you whether or not your message has
been delivered.
• Character Support: Lets you select which character set to use in
displaying your text messages: GSM-alphabet (Global System
for Mobile communication), Uni-code (16-bit, multi-language),
Automatic.
Multimedia Message
The following options are available:
Send Settings
• Priority: you can select the priority level of your messages.
• Validity Period: set the length of time your messages are stored
in the message center while the network attempts to deliver
them.
• Delivery After: you can set a delay time before the phone sends
your messages.
• Delivery Report: when this option is On, the network informs
you whether or not your message has been delivered.
• Read Reply: when this option is On, your phone sends a request
for a reply along with your message to the recipient.
96
Checking Memory Status
Receive Settings
• Msg. Reception: you can set your phone to automatically
receive or reject incoming messages.
• Anonymous Reject: you can set your phone to automatically
reject or receive anonymous messages.
• Ads Reject: you can set your phone to automatically reject or
receive advertising messages.
• Report Allowed: you can set the option to receive a delivery
report.
Multimedia Message Profiles
• Current Profile: you can select a connection profile to be used
for sending and receiving MMS messages.
• Profile Setting: Lets you create or change your multimedia
message connection profile(s).
Checking Memory Status
You can check the amount of the memory being used and
the memory remaining for multimedia messages.
The display shows the total space including the used and
free space.You can also view how much space is currently
occupied by each message box.
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Select Messaging. Highlight Memory Status and press
the Select soft key or the key.
3. Select the message type you want.
For Text Message, scroll through the memory. The
displays shows the number of messages you have
stored in the SIM card and memory and the number of
Section 7: Messaging
97
messages you have saved in each folder.
For Multimedia Message, My MEdia and Games the
displays show the total memory amount, including the
amount of memory available and used for storing
messages. It also shows the memory amount used for
each message folder.
4. When you have finished, press the
key.
98
Time & Date
This menu allows you to change the current time and date
displayed.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Time & Date. Press the
Select soft key or the key. Select a menu and then
change the setting. If the menu has submenus, repeat as
necessary.
3. When you have finished, press the
Set Time
key
Allows you to enter the current time. You can choose the
time format in the Time format menu.
Set Date
Allows you to enter the month, day, and year.
Time Format
Allows you to change the time format to 12 hours or
24 hours.
Auto Update
Allows you to receive time information from your service
provider’s network.
• Off: you need to manually set the time and date according to the
current time zone using the Set time menu (Menu 9.1.1).
• On: the phone automatically updates the time and date
according to the current time zone using the network service.
100
Phone Settings
• Confirm first: the phone asks for a confirmation before the
update.
Note: Automatic updates of time and date does not change the time you
have set for alarm settings or calendar memos.
Phone Settings
To customize the settings for your phone use the
following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Phone Settings. Press the
Select soft key or the key.
3. Select a menu and then change the setting. If the menu
has submenus, repeat as necessary.
4. When you have finished, press the
Language
key
You can select a display or text messaging language.
When the language option is set to Automatic, the
language is automatically selected according to the
language of the SIM card used.
Depending on your country, service provider, or the
software version ofthe phone, the Automaticoption may
not display.
Greeting Message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
Section 8: Changing Your Settings
101
Extra Settings
You can turn the automaticredialor answer features on or
off.
1. From the Phone Settings menu, Select Extra Settings
2. To turn a feature on, press the Select soft key or the
key. A check mark displays in front of the option.
3. To turn a feature off, press the Select soft key or the
key. The check mark no longer displays.
The following options are available:
Note: The interval between call attempts varies.
• Auto redial: when this option is checked, the phone makes up to
ten attempts to redial a phone number after an unsuccessful
call.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the
key or
the Reject soft key. To reject the call, press the
Reject soft key.
key or the
• Open to Answer: when this option is checked, you can simply
open the phone to answer a call. When it is unchecked, you
must open the phone and press a key to answer a call,
depending on the setting of the Anykey answer option. See
below.
When this option is unchecked, you must press the
key or Accept soft key to answer a call.
102
Display Settings
Display Settings
In this menu, you can change various settings for the
display or backlight.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Display Settings and
press the Select or key.
3. Select a menu and then change the setting. If the menu
has submenus, repeat this step.
For the details of each menu, see the next sections.
4. When you have finished, press the
Wallpaper
key
This menu allows you to change the background image or
the color of the text to be displayed in Idle mode.
The following options are available:
• Shop Graphics: allows you to access the web site preset by your
service provider to download images. Once you have
downloaded images, they are saved in the Graphics folder.
• Animations: allows you to choose the multi-media or pictures
that appear in your phone’s display when you turn it on, turn it
off, and while in standby mode (wallpaper)
• Graphics: allows you to select a graphic that appear in your
phone’s display when you turn it on, turn it off, and while in
standby mode.
• Text Position: you can specify the positioning of the text in the
display.
• Text Color: you can specify whether or not the phone displays
the time and date on the Idle screen.
Section 8: Changing Your Settings
103
Skin
This menu allows you to select the menu display style.
You can choose either Pattern 1 or Pattern 2.
Backlight Time
You can select the length of time the backlight is on. The
backlight turns on when you press a key, when you open
thephoneor you receivea callor message,and remainson
for the specified length of time.
Brightness Control
You can adjust the display brightness to see it better in
different lighting conditions.
Press the Up or Down key or press the Volume keys to
adjust the brightness.
Main LCD
You can adjust the Main LCD display brightness to see it
better in different lighting conditions.
Press the Up or Down key or press the Volume keys to
adjust the brightness.
External LCD
You can adjust the external LCD display brightness to see
it better in different lighting conditions.
Press the Up or Down key or press the Volume keys to
adjust the brightness.
Dialing Font Color
Dialing Font Color adjust the color ofthe numbers as they
are entered into the display.
104
Sound Settings
Press the Select soft key to select Black or Rainbow.
Sound Settings
You can customize the settings related to various sounds
for the phone, such as the call ringer,key tone, power on/
off tone, slider tone, and so on.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings. Highlight Sound Settings and press the
Select soft key or the key.
3. Select a menu and then change the setting. If the menu
has submenus, repeat as necessary.
4. When you have finished, press the
Incoming Calls
key.
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
• Shop Ringtones: allows you to access the web site preset by
your service provider to download melodies. Once you have
downloaded melodies, they are saved in the Audio folder.
• Default Ringtones: allows you to use the preloaded ringtones
that come with your phone.
• My Audio: allows you to use preloaded or downloaded
ringtones.
• Ring Volume: allows you to adjust the ring volume to one of 5
levels.
• Alert Type: allows you to specify how you are to be informed of
incoming calls. The following options are available:
Section 8: Changing Your Settings
105
• Melody: the phone rings using the ring melody selected in the
Ring Tone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then Melody: the phone first vibrates three times and
then starts ringing.
Keypad Tone
This menu allows you to select the tone that the phone
sounds when you press a key.To turn offthe sound, select
Off.
Message Tone
This menu allows you to set up the ringer for incoming
messages, text messages, multimedia messages, and
broadcast messages
Text Message
This menu allows you to select how the phone informs
you that a new text message has been received.
The following options are available:
• Tone: allows you to use one of several message tones.
• Alert Type: allows you specify how you are informed of any
incoming messages.
• Silent: only the text notification appears; the phone neither rings
nor vibrates.
• Tone: the phone rings using the tone selected under the Tone
option.
• Vibration: the phone vibrates.
• Vibration Then Tone: the phone vibrate then selected tone
sounds.
106
Sound Settings
• Repetition: allows you to specify how often the phone informs
you of a new message. The following options are available:
• Once: the phone alerts you to a new message just once at the
time of receipt.
• Periodic: the phone alerts you to a new message every 2
minutes until you open the message.
Multimedia Message
This menu allows you to select how the phone informs
you that a new multimedia message has been received.
The following options are available:
• Tone: allows you to use one of several message tones.
• Alert Type: allows you specify how you are informed of any
incoming messages.
• Silent: only the text notification appears; the phone neither rings
nor vibrates.
• Tone: the phone rings using the tone selected under the Tone
option.
• Vibration: the phone vibrates.
• Vibration Then Tone: the phone vibrates then selected tone
sounds.
• Repetition: allows you to specify how often the phone informs
you of a new message. The following options are available:
• Once: the phone alerts you to a new message just once at the
time of receipt.
• Periodic: the phone alerts you to a new message every 2
minutes until you open the message.
Section 8: Changing Your Settings
107
Power On/Off
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn off the sound, select Off.
Silent Mode
Thismenu allows you to select how you are notified when
silent mode is activated. You can specify whether the
phone vibrates or mute all sound.
The following options are available:
• Vibration: the phone vibrates in silent mode.
• Mute: the phone mutes the sound of an incoming call in silent
mode.
Note: When Silent mode is activated your keypad tones are muted. This
feature should not be used when you access automated services that
require you to enter numbers (such as your voice mail password).
In idle mode press and hold the
key, to activate or
deactivate silent mode. When silent mode is active on
your handset the
appears in the top line ofthe display.
Extra Tone
You can customize additional tones for the phone.
1. To turn a given tone on, press the Select soft key or the
key. A check mark displays in front of the option.
2. To turn a given tone off, press the Select soft key or the
key. The check mark no longer displays in front of
the option.
108
Network Services
Network Services
For more information about Network Services,
Security Settings
TheSecurity featureenablesyou to restricttheuseofyour
phone by the others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings. Highlight Security and press the Select
soft key or the
key.
3. Select a menu and then change the setting. If the menu
has submenus, repeat as necessary.
4. When you have finished, press the
PIN Check
key.
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
Section 8: Changing Your Settings
109
• Enable: you must enter the PIN each time the phone is switched
on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN Check feature is enabled.You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when you
switch on the phone.
Change Password
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
110
Security Settings
Privacy
Using this menu, you can lock your media contents, such
as picture messages, Voice messages, Voice list, images,
and sounds. Once you have locked the contents, you
must enter the phone’s password to access the associated
menus.
1. To select an item to lock, press the Up or Down key. To
lock all of the contents, select All.
2. To place a check mark, press the key.
3. To remove a check mark, press the key.
4. To lock the marked items, press the OK soft key.
5. When the phone asks for the password, enter the
password and press the OK soft key or the key.
SIM Lock
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to unlock the SIM so you can use a different SIM card.
Once you have entered the lock code, you are asked to
confirm your entry.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phone book.
You must enter your PIN2.
Section 8: Changing Your Settings
111
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Resetting Your Phone
You can easily reset your phone to its’ default settings.
1. In Idle mode, press the Menu sot key to access Menu
mode.
2. Select Settings. Highlight Reset Settings and press the
Select soft key or the key.
3. Select All or a specific setting to reset.
• All
• Phone Settings
• Display Settings
• Sound Settings
Press the Yes soft key to confirm reset.
Press the No soft key to return to Reset Settings screen.
112
Resetting Your Phone
4. Enter the 4 to 8-digit password and press the OK soft
key or the key.
Section 8: Changing Your Settings
113
114
Section 9: WAP
Topics Covered
•
•
•
•
•
•
Launching the WAP Browser
Accessing a WAP site
Navigating the WAP Browser
Using Favorites
Downloading Multimedia Files
Clearing the Cache
Your phone is equipped with a WAP (Wireless
Application Protocol) browser which allows you to
access Internet specified for mobile phones. This section
explains how to access the WAP services of your service
provider and navigate the WAP browser.
Section 9: WAP 115
Launching the WAP Browser
1. In Idle mode, press the
key to launch the WAP
browser.
or
Press the Menu soft key to access menu mode and
select MEdia Net and press the Select soft key or the
key.
2. Highlight MEdia Net Home and press the Connect soft
key or the
key.
Your phone is connected to the network and loads the
homepage of the Wireless Web service provider. The
content of the start-up homepage depends on your
Wireless Web service provider.
3. To scroll through the screen, use the Up and Down
Navigation keys.
4. To exit the browser at any time, simply press the
key.
Access a WAP Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the
Bookmarks option on the browser menu list or Favorites menu.
• Entering a URL address manually; use the Go To URL option on
the browser menu list or http:// menu.
116
Navigating the WAP Browser
Navigating the WAP Browser
1. To scroll through browser items, press the Up or Down
Navigation keys.
2. To select a browser item, press the
key or press the
Options soft key and choose Select.
3. To select a numbered item, press the corresponding
numeric key.
4. To return to the previous page, press the
key, or
press the Options soft key and choose Back.
5. To access the browser menu list, press the Menu soft
key.
6. To return to the start-up homepage, press and hold the
key for more than two seconds, or press the Menu
soft key and select the Home option.
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active
text input mode is indicated on the screen. To change the
text input mode, press the
key one or more times.
The following modes are available:
Upper-Case Alphabet Mode (A)
allows you to enter upper-case characters.
Lower-Case Alphabet Mode (a)
allows you to enter lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by
pressing the
key.
Section 9: WAP 117
T9 Mode (T9)
allows you to enter characters by pressing one key per
letter. In this mode, you can use only the key to
display alternative words. To change case, press the
key.
Number Mode (1)
allows you to enter numbers.
Selecting and Using Menu Options
Various menus are available when using the WAP
Browser to navigate the Wireless Web.
To access menu options, using the Up or Down
Navigation key,scrollto the WAP Browser icon (a blue
square willdisplay around the icon)and press the key.
The following options display:
• Go to URL: allows you to manually enter the URL address of a
WAP site. After entering an address, press the OK soft key to go
there directly.
• Favorites: shows the bookmarks list. You can bookmark the
current page or access previously book marked pages.
• Text Message: allows you to send messages using the WAP
server.
• My Media: displays My MEdia menu.
• Home: takes you back at any time to the homepage of the
Wireless Web service provider.
• Back: allows you to move back one page.
• Show URL: displays the URL address of the page to which you
are currently connected. It also enables you to set the current
site as the startup homepage.
118
Using Favorites
• Reload: reloads the current page.
Using Favorites
While navigating the WAP browser, you can bookmark
the site to quickly and easily access it at a future time. The
URL addresses of the book marked sites are stored in the
Favorites folder, wherein you can use the 5-preset URL
addresses and store your favorite URL addresses.
Accessing a WAP Site Using Favorites
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select a bookmark item from the Favorite list and press
the Select soft key or the
key.
5. Select the option Go. You are accessed to the
corresponding WAP site.
Storing a URL Address
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites.
4. Select an Empty location, and press the Select soft key
or
key.
Section 9: WAP 119
5. Enter the address and press the OK soft key or the
key.
6. Enter a name for the bookmark and press the OK soft key
or the
key. The bookmark name displays in the
selected location.
7. When you have finished, press the
key.
Editing a Bookmark
1. From the Favorite list, select the bookmark you want to
change.
2. Select Edit.
3. Change the address and the name, as you would when
storing a new one.
4. When you have finished, press the
key.
Deleting a Bookmark
1. From the Favorites list, select the bookmark you want to
delete.
2. Select Delete.
3. Press the Yes soft key or the
key to confirm the
press the key.
deletion.
4. When you have finished,
120
Downloading Multimedia Files
Downloading Multimedia Files
You can buy a variety of multimedia files, such as
ringtones, graphics, applications, Multimedia contents,
and so on from the WAP browser and download them to
your phone’s memory. Your phone has embedded links
to the WAP site providing you with download services,
preset by your service provider.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select MEdia Mall. Highlight Shop Ringtones, Shop
Games, Shop Graphics, Shop Multimedia, or Shop
Applications, depending on the type of items you want
to buy.
To access homepage of the online shopping mall, select
MEdia Home.
3. Find the item you want to download and follow the
instructions on the screen to purchase it.
Note: This content is delivered to you in Multimedia messages. You can
retrieve the messages from the server and then save the items in your
phone’s memory. you cannot forward these messages to other people or
add the saved items to an Multimedia message.
Clearing the Cache
The cache is the phone’s temporary memory in which the
most recently accessed WAP pages are stored. You can
clear the cache at anytime.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Section 9: WAP 121
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Clear Cache.
4. Press the Yes soft key or the
key to confirm deletion.
key
5. When you have finished, press the
Changing the WAP Profiles
You can set up 5 server profiles for the WAP browser.
1. In Idle mode, press the Menu soft key to access menu
mode and select MEdia Net and press the Select soft
key or the
2. Using the Up or Down Navigation key scroll to Browser
Profiles and press the Select soft key or the key.
3. Scroll to Profile Settings and press the Select soft key
or the key.
key.
4. Select the profile you want.
For each profile, the following options are available:
• Profile Name: enter a name that you wish to assign to the HTTP
proxy server.
• Home URL: set the address of your startup homepage. When
the default homepage displays, you can delete it using the
key and enter your own choice.
• Bearer: select the bearer to be used for each type of network
address accessed: GPRS First, GPRS Only or GSM Only.
• Proxy Use: enter the WAP gateway address required to connect
to the Internet.
122
Clearing the Cache
• GPRS Setting:
• Proxy Address: enter the WAP gateway address required to
connect to the Internet.
• Proxy Port: enter the Proxy port required to connect to the
Internet.
• APN: enter the access point name used for the address of the
GPRS network gateway.
• Login ID: enter the Login ID required to connect to the GPRS
network.
• Password: enter the password required to connect to the
GPRS network.
• GSM Setting:
• Proxy Address: enter the WAP gateway address required to
connect to the Internet.
• Proxy Port: enter the Proxy port required to connect to the
Internet.
• Dial Number: enter the server phone number.
• Login ID: enter the Login ID required to connect to the GSM
network.
• Password: enter the password required to connect to the
GSM network.
• Data Call Type: select the data call type: ISDN or Analog.
Note: The WAP settings may vary depending on the service provider.
Section 9: WAP 123
124
Section 10: Personal Organizer
Topics Covered
•
•
•
•
•
•
•
•
•
•
Alarms
Organizer
Using the Calendar
Using the To Do List
Using the Calculator
Record Audio
Unit Conversion
Using the Timer
Stopwatch
WorldTime
The topics covered in this section allow you to schedule
appointments, view the calendar, create To-Do lists, set
an alarm, and perform simple math calculations.
Section 10: Personal Organizer
125
Alarms
You can set thealarm to ring at a specifictime.You can also
set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
Setting an Alarm
1. In Idle mode, press the Menu soft key and select Games
& Applications.
2. Highlight Alarm and press the Select soft key or the
key.
3. Select an Alarm Type
• Wake-up Call: the alarm rings to wake you up at the specified
time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Auto Power: the alarm rings even when the phone is turned off.
4. Press the Select soft key or the key.
Note: Your phone is preset to a 12-hour format.
If you want to use the alarm options, press the Options
soft key. The following options are available:
• Alarm Day: select the day or days the alarm will sound.
• Alarm Time: select the time the alarm will sound
• Alarm Tone: select the sound of the alarm
• Remove Alarm: removes alarm settings.
5. Highlight Alarm Day and press the Select soft key.
126
Alarms
6. Highlight the days you want the alarm to sound and
press the Select soft key or the key. Press the OK
soft key when finish. The Alarm Time screen displays.
7. Enter the time for the alarm to sound using the
alphanumeric keypad. Press the OK soft key or the
key.
8. Select AM or PM and press the Select soft key or the
key.
To stop the alarm when it rings, open the phone and
press the Confirm soft key.
Setting Autopower Alarms
You can set the phone to ring the alarm when the time for
an alarm comes, if the phone is switched off.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Alarm and
press the Select soft key or the key.
3. Select Autopower.
4. Select On to activate the Autopower feature. The phone
will automatically switch on to ring the alarm when the
alarm time comes.
If the menu option is set to Off, and the phone is
switched off at the specified time, the alarm does not
ring.
5. When you have finished, press the
key.
Section 10: Personal Organizer
127
Deactivating Alarms
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Alarm and
press the Select soft key or the
key.
3. Select Alarm Type and press the Select soft key or the
key.
4. Press the Options soft key and highlight Remove Alarm
and press the Select soft key or the
key.
A pop-up message displays confirming Alarm
Deactivate. Press Yes to remove or No to exit.
5. When you have finished, press the
key.
Using Organizer
Organizer is a suite of PIM (Personal Information
Management)applications such as a Calendar,To Do List,
and Memo Pad. Schedule events, set reminders, create to
do lists, perform calculations, and more with the digital
assistant functionality of this useful feature.
1. Press the Menu soft key and select Games &
Applications.
2. Highlight Organizer and press the Select soft key or the
key. The following appear in the display.
• New Memo: Enter a memo, which can be viewed at any time.
Memos do not have an alarm setting.
• Calendar: Schedule events for any day by indicating each
event’s start and end time.
• To Do List: Enter up to 25 tasks and set an alarm for each.
128
Using Organizer
3. Use the Navigation key to highlight an application. Press
the Select soft key or the key to enter the highlighted
application’s sub menu. The following sections provide a
detailed description on each application and its function.
Writing a Memo
Create and store notes in Memo Pad. You can’t prioritize
or set an alert for stored notes. Return to Memo Pad
anytime to review and edit your notes.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
3. Highlight New Memo and press the Select soft key or
the key.
key.
4. Add a new memo.
5. While entering a memo, press the right soft key Options
to display a the following text entry modes:
• ABC Mode
• T9 Mode
• Symbolic
• Number
• Add Word
• Language Select
6. Highlight the text mode and press the Select soft key or
the
key.
Section 10: Personal Organizer
129
7. When you’re finished entering details for the memo,
press the left soft key OK. The Save to sub menu appear
in the display.
8. Highlight Save to option and press the Select soft key or
the key. The calendar displays with today’s date
highlighted.
9. Using the Navigation key select a date and press the
Select soft key or the
10. Using the keypad enter the memo time and press the OK
soft key or the key.
key.
11. Select AM or PM, press the Select soft key or the
key. The Alarm Time screen appear in the display.
12. Press the Yes soft key to set alarm.
Press the No soft key to save memo.
13. Using the keypad enter the Alarm time and press the OK
soft key or the
key
14. Select AM or PM, press the Select soft key or the
key. The Alarm Tone screen displays.
15. Using the Navigation key scroll alarm tones.
16. Select alarm tone using the Select soft key or the
key.
Using Memo Pad Options
You can access the following options by pressing the
Options soft key:
• Add: allows you to add a memo.
• Delete: deletes a memo.
130
Using the Calendar
• Edit: allows you to edit the content of your memo.
• Move: allows you to move a memo.
• Copy: allows you to copy a memo.
Using the Calendar
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
4. Scroll to a date on the calendar by pressing the
Navigation key and the Select soft key or the
key.
Alternatively, press the Options soft key and select Go
to Date. You can enter manually a specific date and
press the OK soft key or the key.
An empty memo screen displays allowing you to enter
your memo.
5. While entering your memo, press the right soft key
Options to display a pop-up menu with the following
text entry modes:
• ABCMode
• T9Mode
• Symbolic
• Number
• Add Word
• Language Select
Section 10: Personal Organizer
131
6. Highlight the text mode and press the Select soft key or
the key.
7. When you’re finished entering details for the memo,
press the left soft key OK. The Save to sub menu appear
in the display.
• Scheduler
• To Do List
• Call
• Anniversary
8. Highlight Save to option and press the Select soft key or
the key.
9. Using the keypad enter the memo time and press the OK
soft key or the
key.
10. Select AM or PM, press the Select soft key or the
key. The Alarm Time screen appear in the display.
The color of the date on the calendar changes to blue to
indicate that a memo exist for that date.
11. If you want an alarm to ring on the chose day press the
Yes soft key or the key to set alarm. If not, Press the
No soft key. The memo is saved.
12. Using the keypad enter the Alarm time and press the OK
soft key or the
key
13. Select AM or PM, and press the Select soft key or the
key. The Alarm Tone screen displays.
14. Using the Navigation key scroll through alarm tones.
15. Select alarm tone using the Select soft key or the
key.
132
Using the Calendar
16. When you have finished, press the
key.
Consulting the Calendar
Viewing Memos on the Selected Date
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
4. Select the date you want to view its memo(s).
If there is more than one memo for that date, the latest
memo displays
5. Press the Up or Down key to scroll to the previous or
next memo
If you want to make a new memo for that date, press the
Options soft key.
• Add Memo: allows you to add new memo.
• Go to Date: allows you to go directly to a specified date. Enter
the date using the keypad.
• View All: allows you to view all memos in the calendar.
• Delete Day: allows you to delete the memo for that day.
• Delete All: allows you to delete all memos in the calendar.
6. When you have finished, press the
key.
Section 10: Personal Organizer
133
Viewing All of the Memos on the Calendar
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
4. Press the Options soft key and select View All. The
phone displays the latest memo. You can view all of the
memos, starting with the oldest, regardless of the date.
5. To scroll through the memos, press the Left or Right
Navigation key
6. When you have finished, press the
Deleting Memos
key.
You can delete memos on the calendar one by one or all at
one time.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
4. Select the date you want to view its memo(s),
If there is more than one memo for that date, the latest
memo displays.
134
Using the To Do List
5. Press the Left or Right Navigation key to scroll to the
previous or next memo.
6. Press the Options soft key and select Delete.
7. Press the Yes soft key to confirm deletion.
8. When you have finished, press the
key.
Deleting All Memos
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight Calendar and press the Select soft key or the
key. The calendar displays with today’s date
highlighted.
4. Press the Options soft key and select Delete All.
5. Press the Yes soft key to confirm deletion.
6. When you have finished, press the
key.
Using the To Do List
The To Do List allows you to
• enter a list of task to be done
• assign a priority and a deadline to each task
• sort the tasks by priority and status
Creating a To Do List
1. In Idle mode, press the Menu soft key to access menu
mode.
Section 10: Personal Organizer
135
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the key.
3. Highlight To Do List and press the Select soft key or the
key. You’re prompted to add a new memo.
4. While entering a memo, press the right soft key Options
to display a pop-up menu with the following text entry
modes
• ABC Mode
• T9Mode
• Symbolic
• Number
• AddWord
• Language Select
5. Highlight the text mode and press the Select soft key or
the key.
6. When you’re finished entering details for the memo,
press the OK soft key. The Calendar displays.
7. Using the Navigation key select a date and press the
Select soft key or the
8. Using the keypad enter the memo time and press the OK
soft key or the key.
key.
9. Select AM or PM,and press the Select soft key or the
key. The Alarm Time screen appear in the display.
10. Press the Yes soft key to set alarm.
Press the No soft key to save memo.
11. Using the keypad enter the alarm time and press the OK
soft key or the
key
136
Using the To Do List
12. Select AM or PM, press the Select soft key or the
key. The Alarm Tone screen displays.
13. Using the Navigation key scroll alarm tones.
14. Select alarm tone using the Select soft key or the
key.
15. When you have finished, press the
key.
Adding Tasks to the To Do List
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight To Do List and press the Select soft key or the
key.
4. Press the Options soft key and Select Add. Continue
Viewing the To Do List
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Organizer and
press the Select soft key or the
key.
3. Highlight To Do List and press the Select soft key or the
key. The tasks displays.
4. You can scroll through the task using the Up and Down
Navigation key, if necessary.
5. When you have finished, press the
key.
Section 10: Personal Organizer
137
Using To Do List Options
You can access the following options by pressing the
Options soft key
• Add: allows you to add a new task
• Mark: allows you to change the status of a task. Select
appropriate status (Done or Undo)
• Edit: allows you to edit a task. You can change the text priority,
and/or deadline for the task.
• Move: allows you to move a task.
• Copy: allows you to copy a task.
• Delete: deletes a task.
• Delete All: allows you to delete all tasks.
Using the Calculator
You can use the phone as a calculator. The calculator
provides basic arithmetic functions: addition,
subtraction, multiplication, and division using your
phone.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Calculator and
press the Select soft key or the
key.
3. Enter the first number in your equation using the keypad.
• Press the
• Press the
to enter a decimal point
to set the type of calculation you that you
wish to perform. Your choices are as follows
• [+ ] Addition
138
Record Audio
• [ - ] Subtraction
• [ x ] Multiplication
• [÷ ]Division
• [%]Percentage
• [ ( ] Open Parenthesis
• [ ) ]ClosedParenthesis
4. Use the keypad to enter the second number into your
equation.
5. Press the Equal soft key or the
key to perform the
operation and view your results in the Answer field of
the Calculator screen.
6. Repeat steps 3 to 5 as many times as required.
7. When you have finished, press the
key.
Record Audio
This menu allows you to record a new memo.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. The following sub menu
displays.
3. Highlight Record Audio and press the Select soft key or
the
key.
4. Highlight Record and press the Select soft key or the
key. The following icons appear in the bottom of the
display:
•
•
•
Record
Stop
Play
Section 10: Personal Organizer
139
•
•
Rewind
Fast Forward
5. Press the Select soft key or the
key to start
recording.
Record a memo by speaking into the microphone.
6. When you press the Select soft key or the key to stop
recording or the time expires. The audio is automatically
saved and the
play icon is highlighted in red.
7. Press the Select soft key or the key to play recording.
During playback the following playback options are
available.
•
•
•
•
•
Stop
Play
Rewind
Fast Forward
Pause
8. Press the Options soft key to display the following
• Send: allows you to send the recorded audio to other people by
using the MMS feature. For details about sending a multimedia
• Rename: allows you to rename the recording.
• Delete: deletes the recording.
• Properties: displays detailed information about the recorded
audio message such as name, size and format.
9. When you have finished, press the
key.
140
Record Audio
Reviewing a Recorded Audio
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. The following sub menu
displays.
3. Highlight Record Audio and press the Select soft key or
the
4. Highlight Recorded Audio and press the Select soft key
or the key. A list of recorded audios display.
key.
5. Scroll to an audio file. Press the Select soft key or the
key to play audio.
6. Press the Options soft key to display the following.
• Send: allows you to send the recorded audio to other people by
using the MMS feature. For details about sending a multimedia
• Rename: allows you to rename the recording.
• Delete: deletes the recording.
• Properties: displays detailed information about the recorded
audio message such as name, size and format.
7. When you have finished, press the
key.
Deleting Recorded Audios
You can delete your recorded audios one by one or all at
one time.
1. Access the Recorded Audio menu and select the audio
file you want to delete.
2. Press the Select soft key or the key.
Section 10: Personal Organizer
141
3. Press the Options soft key and then select Delete.
4. Press the Yes soft key or the key to confirm deletion.
key.
5. When you have finished, press the
Delete All Recorded Audios
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Record Audio
and press the Select soft key or the
key.
3. Scroll down using the Navigation key and highlight
Delete All and press the Select soft key or the key.
4. Press the Yes soft key or the
to confirm Delete All.
key.
5. When you have finished, press the
Changing Record Audio Settings
You can change the default settings for using Record
Audio.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Record Audio
and press the Select soft key or the
key.
3. Select Settings and press the Select soft key or the
key.
The following options are available:
• Recording Time: allows you to set recording time.
• Volume: allows you to set the sound volume.
• Default Name: allows you to set a default name for all recorded
audio.
142
Using Unit Conversion
4. When you have finished, press the
key.
Checking Memory Status
You can check the amount of memory being used and the
memory remaining for voice memos.
The display shows you the total, used, and free memory,
including the number of memos you stored and the total
number of memos you can store.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Record Audio
and press the Select soft key or the
key.
3. Select Memory Status.
This display show the Total, Used and Free memory
amount for My MEdia, Games, and Multimedia
Messages.
4. When you have finished, press the
key.
Using Unit Conversion
You can use the phone as a unit converter. The unit
converter provides basic conversion functions: length,
weight, volume, area, and temperature.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Unit
Conversion and press the Select soft key or the key.
The unit conversion sub menu appear display.
• Length
• Weight
Section 10: Personal Organizer
143
• Volume
• Area
• Temperature
3. Use the Navigation key to highlight a conversion option
and press the Select soft key or the
key.
4. Enter the amount to convert. Use the Navigation key to
select the conversion method.
Using the Timer
Timer allows you to view the amount oftime between the
current day and any event that you wish to schedule.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight Timer and
press the Select soft key or the
key. The Timer
screen appear in the display.
3. Press the Set soft key to set timer.
4. Using the keypad enter the time and press the OK soft
key.
5. Press the Start soft key to start timer.
Press the Stop soft key to stop timer.
Stopwatch
You can use this menu to set a stop watch. Press the OK
soft key to start the stopwatch. Press the Reset soft key to
erase all stop watch times recorded.
World Time
144
World Time
World Time allows you to view the time ofday or night in
any part of the world.
1. In Idle mode, press the Menu soft key to access menu
mode.
2. Select Games & Applications. Highlight World Time
and press the Select soft key or the
key.
3. Use the Navigation key to display the city (or cities),
date, and time that you wish to view. The following cities
are supported.
• Chicago
• NewYork
• Caracas
• Rio
• GMT
• London
• Paris
• Cairo
• Moscow
• Dubai
• Karachi
• Delhi
• Dacca
• Bangkok
• Beijing/H.K.
• Seoul
• Sydney
• Noumea
• Wellington
Section 10: Personal Organizer
145
• Honolulu
• Anchorage
• LA
• Denver
146
Section 11: Network Services
Topics Covered
•
•
•
•
•
Network Services
Call Forwarding
Call Waiting
Network Selection
Caller ID
This section allows set up the network functions
supported by your carrier.Some ofthese services may not
be available due to coverage area or service plans. If you
have any questions,please contact the Customer Support
center.
Section 11: Network Services
147
Network Services
You can customize the settings for network features,such
as call forwarding, and call waiting.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Select Settings and highlight Network Services. Press
the Select soft key or the key.
3. Select a menu and then change the setting. If the menu
has submenus, repeat as necessary.
4. When you have finished, press the
key
Call Forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
For example,you may wish toforward your businesscalls
to a colleague while you are on vacation.
1. From the Network Services menu screen, select Call
Forwarding and press the Select soft key or the key.
2. Select one of the following call forwarding options.
• Forward Always: all calls are forwarded
• Busy: calls are forwarded when you are already on another call
• No Reply: calls are forwarded when you do not answer the
phone.
• Unreachable: calls are forwarded when you are not in an area
covered by your service provider or when your phone is
switched off.
• Cancel All: all call forwarding options are canceled.
148
Call Waiting
3. Select the type of calls, Voice Calls or Data Calls. The
current status displays. If the option has already been
set, the number to which the calls are forwarded
displays.
4. Press the Activate soft key or the
5. Using the keypad enter the forwarding number and press
the OK soft key or the key.
key.
Call Waiting
Thisnetwork serviceinformsyou when someoneistrying
to reach you during another call. You can specify
individualcallwaiting optionsfor voicecallsand/ or data
calls.
Section 11: Network Services
149
Setting Call Waiting Options
1. From the Network Services menu screen, select Call
Waiting.
2. Select the type of calls, Voice Calls or Data Calls. The
screen informs you whether call waiting is activated or
deactivated.
3. Press the Activate soft key or the key to activate the
call waiting feature.
4. The phone sends your settings to the network and the
network’s acknowledgement displays.
150
Network Selection
Deactivating Call Waiting Settings
1. From the Network Services menu screen, select Call
Waiting.
2. Select the type of calls, Voice Calls or Data Calls. The
screen informs you whether call waiting is activated or
deactivated.
Select Cancel All to cancel all call waiting options.
3. Press the Deactivate soft key or the
key.
4. The phone sends your settings to the network and the
network’s acknowledgement displays.
Network Selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
1. From the Network Services menu screen, select
Network Selection.
2. Select the options you want.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, go to step 3.
3. Select the network you want. The phone will scan for
that network and you will be connected.
Section 11: Network Services
151
Caller ID
You can prevent your phone number from being
displayed on the phone of the person you are calling.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide Number: you number does not display on the other
person’s phone.
• Send Number: your number is sent each time you make a call.
152
Shop Games
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone. For more
information, see ‘Section 9: WAP” on page 115
You can download MIDlets (Java applications that run on
mobile phones) from various sources using the WAP
browser and store them in your phone. When you access
the Games menu, the list of default games appears. Once
you have downloaded games, they are added to the list.
Note: Java services may not be available, depending on your service plan
and phone model.
My Games
My Games stores all downloaded games.
Settings
You can customize the profiles containing the settings for
connecting your phone to the network. These settings are
also used for the WAP browser or Instant Messenger, or
sending Multimedia messages or Emails.
• APN: enter the access point name used for the address of the network.
• Login ID: enter the user ID required to connect to the network.
• Password: enter the password required to connect to the network.
• DNS Settings: enter the DNS (Domain Name System) address.
154
156
Section 13: Health and Safety
Information
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Health and Safety Information
Consumer Information on Wireless Phones
Road Safety
Operating Environment
Using Your Phone Near Other Electronic Devices
Potentially Explosive Environments
EmergencyCalls
FCC Notice and Cautions
Other Important Safety Information
Product Performance
Availability of Various Features/Ring Tones
Battery Standby and Talk Time
Battery Precautions
Care and Maintenance
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safely use your phone.
Section 13: Health and Safety Information
157
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the exposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government. TheseFCCexposurelimitsarederived from
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressed in units of watts per kilogram (W/ kg). The
FCC requires wireless phones to comply with a safety
limit of 1.6 watts per kilogram (1.6 W/ kg). The FCC
exposurelimit incorporates a substantialmargin ofsafety
to give additional protection to the public and to account
for any variations in measurements.
158
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SARis determined
at the highest certified power level,theactualSARlevelof
the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closer you are to a wireless basestation antenna,the lower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body)as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.5 cm separation between the
device, including its antenna (whether extended or
retracted)and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
this mobile phone with all reported SAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 13: Health and Safety Information
159
• Head:1.4 W/Kg.
• Body-worn: 1.42 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/ oet/ fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may be necessary to remove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
and it should providevalues for typicalor maximum SAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/ cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Theterm wirelessphonerefershereto hand-held wireless
phones with built-in antennas, often called "cell,"
"mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio
frequency energy (RF) because of the short distance
between the phone and the user's head. These RF
exposures are limited by Federal Communications
Commission safety guidelines that were developed with
the advice of FDA and other federal health and safety
160
Consumer Information on Wireless Phones
agencies. When the phone is located at greater distances
from the user, the exposure to RF is drastically lower
because a person's RF exposure decreases rapidly with
increasing distance from the source. The so-called
"cordless phones," which have a base unit connected to
the telephone wiring in a house, typically operate at far
lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
when in the stand-by mode. Whereas high levels of RF
can produce health effects (by heating tissue), exposure
to low level RF that does not produce heating effects
causes no known adverse health effects. Many studies of
low level RF exposures have not found any biological
effects. Some studies have suggested that some
biological effects may occur, but such findings have not
been confirmed by additional research. In some cases,
other researchers have had difficulty in reproducing
those studies, or in determining the reasons for
inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
Section 13: Health and Safety Information
161
phones before they can be sold, as it does with new drugs
or medicaldevices. However,the agency has authority to
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user. In such a case,FDA could require the manufacturers
ofwirelessphones to notify users ofthehealth hazard and
to repair,replace or recallthe phones so that the hazard no
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• "Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• "Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• "Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• "National Institute for Occupational Safety and Health
• "Environmental Protection Agency
• "Federal Communications Commission
• "Occupational Safety and Health Administration
• "National Telecommunications and Information Administration
162
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations are
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristicofwireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineered or treated with cancer-causing chemicalsso as
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposed the animals to RFfor up
Section 13: Health and Safety Information
163
to 22hours per day. Theseconditionsarenot similar to the
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, or acousticneuroma, tumors ofthe brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence ofany harmfulhealth
effects from wireless phones RF exposures. However,
none ofthe studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination oflaboratory studies and epidemiological
studies of people actually using wireless phones would
providesomeofthe data that areneeded. Lifetimeanimal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
data that is directly applicable to human populations,but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do -may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
164
Consumer Information on Wireless Phones
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization internationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearch needsthathasdriven theestablishmentofnew
research programsaround theworld. TheProjecthasalso
helped develop a seriesofpublicinformation documents
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
and Development Agreement (CRADA) to do research
on wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 13: Health and Safety Information
165
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But
if you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducing the amount oftime spent using a wireless phone
will reduce RF exposure.
• "If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdata do notdemonstratethatwireless
phonesareharmful. But ifyou areconcerned about theRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
The scientificevidence does not show a danger to users of
wireless phones,including children and teenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
166
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wi re l es s ph on es at a l l. Fo r e xa mpl e, t he g o ve rnm ent i n t he
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
precautionary;it wasnot based on scientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energy in thehead because thephone,which is thesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhether they areused against
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 13: Health and Safety Information
167
believe that accessories that claim to shield the head from
thoseemissions reduce risks. Someproducts that claim to
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
Federaltrade Commission (FTC)charged two companies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendants lacked a reasonable basis to substantiate their
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI. FDA
has tested wireless phones and helped develop a
168
Consumer Information on Wireless Phones
voluntary standard sponsored by the Institute of
Electrical and ElectronicEngineers (IEEE). This standard
specifies test methods and performance requirements for
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterference be found to occur,FDA willconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.slc.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/emfpg.html
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Section 13: Health and Safety Information
169
• Updated 4/3/2002: US food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicateby voice,almost anywhere,anytime.But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
170
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergeny number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies.
If you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
Section 13: Health and Safety Information
171
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
For moreinformation,pleasecall1-888-901-SAFE,or visit
our web-site www.wow-com.com
Provided by the Cellular Telecommunications & Internet
Association
Operating Environment
Remember to follow any special regulations in force in
any area
and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswith other mobileradiotransmitting equipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder).
UsingYourPhoneNearOtherElectronicDevices
Most modern electronicequipmentisshielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
172
Using Your Phone Near Other Electronic Devices
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
Ifyou use any other personalmedicaldevices,consult the
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
Section 13: Health and Safety Information
173
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consult the manufacturer ofany equipment that has been
added to your vehicle.
Posted Facilities
Switch your phoneoffin any facility whereposted notices
require you to do so.
Potentially Explosive Environments
Switch your phone offwhen in any area with a potentially
explosiveatmosphereand obey allsignsand instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots
(fuel storage and distribution areas), chemical plants or
where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
174
Emergency Calls
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
This phone,like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,to makeor receiveany callsthephonemust be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/ or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may
Section 13: Health and Safety Information
175
first need to deactivate those features before you can
make an emergency call.Consult this document and your
local cellular service provider.
When making an emergency call,remember to giveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play
with it because they could hurt themselves and others,
damage the phone or make calls that increase your phone
bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
or butane)must comply with the NationalFire Protection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
176
Other Important Safety Information
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Although your phone is quite sturdy, it is a complex piece
ofequipment and can bebroken.Avoid dropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air
bag inflates with great force. Do not place objects, including
both installed or portable wireless equipment in the area over
the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates,
serious injury could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
Section 13: Health and Safety Information
177
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou're inside a building, being near a window may give
you better reception.
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
178
Availability of Various Features/Ring Tones
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• Hold the phone with the antenna raised, fully-extended and over
your shoulder.
• Try not to hold, bend or twist the phone's antenna.
• Don't use the phone if the antenna is damaged.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/ or usage
charges. Not allfeatures are available for purchase or use
in all areas. Downloadable Ring Tones may be available
at an additional cost. Other conditions and restrictions
may apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
Section 13: Health and Safety Information
179
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
180
Care and Maintenance
• Do not short-circuit the battery. Accidental short- circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of the
reach of small children's.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
Section 13: Health and Safety Information
181
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• Use only the supplied or an approved replacement antenna.
Unauthorized antennas or modified accessories may damage
the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
182
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuing for the following specified period oftime after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
Other Phone Accessories 1 Year
WhatisNotCovered?This Limited Warranty is conditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removed or made illegible; (c) any plastic surfaces or
other externally exposed parts that are scratched or
damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories,
184
Standard Limited Warranty
products, or ancillary/ peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased
outside the United States or Canada. This Limited
Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the
battery has been charged by a battery charger not
specified or approved by SAMSUNG for charging the
battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been
used in equipment other than the SAMSUNG phone for
which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsale showing the date ofpurchase, the serial number of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
Section 14: Warranty Information
185
replaced leather cases, pouches and holsters will be
warranted for a period of ninety (90) days. All other
repaired/ replaced Product willbewarranted for a period
equal to the remainder of the original Limited Warranty
on theoriginalProduct or for 90days,whichever islonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,and labor chargesfor therepair or return ofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTH IN THEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• "THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS
FOR ANY PARTICULAR PURPOSE OR USE;
• "WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• "DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• "THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• "COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
186
Standard Limited Warranty
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/ PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTO YOU.IN ADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND
RESULTING FROM THEPURCHASE,USE,ORMISUSE
OF, OR INABILITY TO USE THE PRODUCT OR
ARISING DIRECTLYORINDIRECTLYFROM THEUSE
OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OFTHEEXPRESSWARRANTY,INCLUDING
INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR
GROSS NEGLIGENCE) OR FAULT COMMITTED BY
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR
ANY BREACH OF CONTRACT OR FOR ANY CLAIM
BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/ PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF
Section 14: Warranty Information
187
INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO
HAVE OTHER RIGHTS, WHICH VARY FROM STATE
TO STATE/ PROVINCE TO PROVINCE. THISLIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE
OTHER THAN THEORIGINALPURCHASEROF THIS
PRODUCT AND STATES PURCHASER'S EXCLUSIVE
REMEDY. IF ANY PORTION OF THIS LIMITED
WARRANTY IS HELD ILLEGAL OR
UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY
SHALL NOT AFFECT THE ENFORCEABILITY FOR
THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND
WILL ALWAYS BE CONSTRUED TO BE LIMITED BY
ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE
OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR
REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE OR
SUITABILITY OF ANY THIRDPARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT IS INCLUDED WITH
THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATEANYSUCH SOFTWAREOREQUIPMENT
188
Standard Limited Warranty
WITH THEPRODUCT. THEQUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005Samsung Telecommunications America.Allrights
reserved.
No reproduction in whole or in part allowed without
prior
Section 14: Warranty Information
189
written approval. Specifications and availability subject
to change without notice.
Intellectual Property Statement
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
secured by the Intellectual Property. Moreover,you agree
that you willnot (and willnot attempt to)modify,prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
190
Samsung Telecommunications America (STA), L.P.
Samsung Telecommunications America (STA),
L.P.
Internet Address: http://www.samsungusa.com
©2005Samsung TelecommunicationsAmerica.Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.
Printed in South Korea
GH68-06772A
Openwave® is a registered Trademark ofOpenwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Headquarters
Customer Care Center
,
1301 East Lookout Dr.
Richardson, TX 75082
Tel: 972.761.7000
1601 E. Plano Parkway
Suite 150
Plano, TX 75074
Toll Free Tel:
1.888.987.HELP (4357)
Section 14: Warranty Information
191
192
Creating and Sending New
Messages 84
Index
D
A
Dialing a Number
Add New Words to T9
Address Book 65
Searching for a Number
Display
backlight 22
icons 21
B
Display Settings
Backlight
description 22
Battery
E
charging 12
installing 12
removing 10
Changing the Text Entry
Mode 58
C
Adjusting the Call
Correcting the
Number 24
Redialing Last
Number 24
F
G
Games
Memory Status 155
193
Understanding Your
SIM card
Phone 17
Features of Your
installing 10
Front View of Your
Speed Dial
V
Standard Limited
Warranty
Standard Limited
W
WAP 115
Switching on/off
phone 14
T
T9 mode 58
Text Input Mode
Text Messages 83
U
Understanding Your
Address Book
Editing an Existing
Finding an Address book
195
196
|