Samsung SGH X820 User Manual

* Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-10937A

World Wide Web

http://www.samsungmobile.com

English (EU). 05/2006. Rev. 1.0

Drive safely at all times

Do not use a hand-held phone while driving. Park the

vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them in

an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical equipment

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Failure to comply with the following

precautions may be dangerous or illegal.

Interference

All wireless phones may be subject to interference,

which could affect their performance.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved batteries and

accessories, such as headsets and PC data cables. Use

of any unauthorised accessories could damage you or

your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is replaced

with an incorrect type.

Your phone is not water-resistant. Keep it dry.

• Dispose of used batteries according to the

manufacturer’s instructions.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

At very high volumes, prolonged listening to a

headset can damage your hearing.

Emergency calls

Key in the emergency number for your present

Qualified service

location, then press

Only qualified service personnel may repair your

phone.

Keep your phone away from small children

Keep the phone and all its parts, including accessories,

out of the reach of small children.

For more detailed safety information, see "Health and

safety information" on page 96.

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety or

phone features.

•

Music player

Play music files using your phone as

a music player.

Indicates that you can get more information on

the referenced page.

ꢀ

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

•

Bluetooth

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

Indicates a key on the phone. For example,

[

]

Indicates a soft key, whose function is displayed

< >

on the phone screen. For example, <Menu

•

Photo printing

Print your photos to preserve your

best moments forever.

•

Web browser

Access the wireless web to get up-

to-the-minute information and a

wide variety of media content.

Phone to TV

View photos and video clips

captured with the phone on your TV

screen.

Java

Enjoy Java

™-based embedded

games and download new games.

•

Image editor

Crop, resize, rotate, and decorate

your photos.

•

Offline mode

Switch your phone to offline to use its

non-wireless functions in an airplane.

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, image, video, and audio.

File viewer

Open documents in various formats

on the phone without corruption.

E-mail

Send and receive e-mails with image, video, and

audio attachments.

Browse the web . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Use Phonebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Send messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

View messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Use Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Watch the phone display on a TV . . . . . . . . . . . . . . . . 24

Contents

Unpack

Make sure you have each item

Your phone

Enter text

AB, T9, Number, and Symbol modes

Call functions

Keys, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

Install and charge the phone . . . . . . . . . . . . . . . . . . . .

Power on or off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Keys and display. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Access menu functions . . . . . . . . . . . . . . . . . . . . . . . 12

Customise your phone. . . . . . . . . . . . . . . . . . . . . . . . 13

Make/Answer calls . . . . . . . . . . . . . . . . . . . . . . . . . . 15

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, the music player, the web browser,

and other special features

Index

103

Use the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Play music . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

ꢀ

p. 31

3 Applications

ꢀ

p. 38

5 Messages

ꢀ

p. 51

8 Camera

9 Settings

ꢀ

p. 76

p. 82

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp. 31

ꢀp. 32

ꢀp. 33

1 Music player

2 Voice recorder

3 Image editor

4 Java world

5 World clock

6 Alarm

7 Calculator

8 Converter

9 Timer

ꢀ

p. 38

p. 41

p. 42

p. 44

p. 45

p. 46

p. 47

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀ

p. 51

p. 55

p. 60

p. 61

p. 66

ꢀ

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Connection settings

10 Reset settings

ꢀ

p. 82

p. 83

p. 84

p. 85

p. 86

p. 89

p. 91

p. 93

p. 94

6 Call time

6 Memory status

7 Call costs^*

6 My files

ꢀ

p. 66

2 Phonebook

ꢀp. 33

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀ

p. 67

p. 68

p. 69

p. 70

p. 72

10 Stopwatch

11 Key management

12 SIM AT^*

1 Contact list

2 Create contact

3 Group

ꢀp. 33

ꢀp. 34

ꢀp. 35

ꢀp. 36

ꢀp. 37

p. 47

4 Speed dial

4 Browser

ꢀp. 48

5 My namecard

6 Own number

7 Management

8 Service number^*

1 Home

ꢀp. 48

ꢀp. 49

ꢀp. 50

ꢀp. 51

* Shows only if supported by your

SIM card.

**Shows only if supported by your

service provider.

7 Calendar

ꢀ

p. 72

2 Enter URL

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

8 Streaming settings^**ꢀp. 51

Unpack

Your phone

Make sure you have each item

Keys, features, and locations

Camera lens

Headset/

Adapter jack

Earpiece

Phone

Travel Adapter

Camera key

Volume keys

Display

Navigation keys

(Up/Down/Left/

Right)

Web access/

Confirm key

Battery

User’s Guide

Right soft key

Left soft key

Dial key

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Alphanumeric

keys

Delete key

The items supplied with your phone and

the accessories available at your

Samsung dealer may vary, depending on

your country or service provider.

Special

function keys

Microphone

Get started

Install the battery.

Reattach the cover.

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Plug the travel adapter into the phone.

Install and charge the phone

Remove the battery

cover.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

If the phone is already on,

first turn it off by pressing

Make sure that the gold-

coloured contacts on the

card are face down.

and holding [

Get started

Power on or off

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

Switch on

1. Press and hold [

Do not turn on

the phone when

mobile phone

2. If necessary, enter the PIN and

Remove the adapter from the phone.

press <OK>.

use is prohibited.

Press and hold [

Switch off

Keypad lock

You can lock the keypad to prevent accidental presses

from affecting phone operations.

Low battery indicator

When the battery is low:

In Idle mode, press and hold [ ] and press <Yes>.

To unlock the keypad, press the left soft key and then

•

a warning tone sounds,

[

You can also set the phone to lock the keypad

automatically. p. 83

the low battery message displays, and

the empty battery icon

blinks.

ꢀ

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Offline mode

Keys and display

You can switch the phone to Offline mode, in which the

phone functions requiring network connection are

deactivated. This mode is helpful when you want to

use your phone in a place where you are not allowed

to use mobile devices, such as in an airplane and at a

hospital.

Keys

Perform the function indicated on the

bottom line of the display.

In Idle mode, access your favourite

menus directly.ꢀp. 82

To switch to Offline mode, press <Menu> and select

In Menu mode, scroll through menu

options.

Settings

→

Phone settings

→

Offline mode

→

On.

In Offline mode, you can use non-wireless functions,

such as games, calendar, camera, and music player.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted

menu option or confirm input.

Make or answer a call.

In Idle mode, retrieve numbers recently

dialled, missed, or received.

Delete characters from the display and

selected items in an application.

Get started

Press and hold to switch the phone on or

off.

Adjust the phone volume.

In Idle mode, adjust the key tone

volume.

End a call.

In Menu mode, cancel input and return

the phone to Idle mode.

Display

Layout

Enter numbers, letters, and some special

characters.

Icons

display various icons.

In Idle mode, press and hold [1] to

access your voicemail server. Press and

Text and graphics

display messages,

instructions, and

hold [0] to enter an international call

information you enter.

prefix.

Soft key function

indicators

Enter special characters.

Contacts

show the current functions

assigned to the soft keys.

In Idle mode, press and hold [ ] to

activate or deactivate Silent mode. Press

and hold [ ] to lock the keypad.

Icons^*

Received signal strength

GPRS network

In Idle mode, press and hold to turn on

the camera.

Connecting to GPRS network

In camera mode, take a photo or record a

video.

Transferring data in GPRS

network

Icons

EDGE network

Office Zone, if registered for the

appropriate service

Connecting to EDGE network

Keys locked

ꢀp. 83

Transferring data in EDGE

network

Connected to Bluetooth

hands-free car kit or headset

Call in progress

Bluetooth active

ꢀp. 89

Out of your service area; you

cannot make or receive calls

Synchronised with PC

MP3 playback in progress

MP3 playback paused

Connected to Internet

Roaming network

New message

Alarm setꢀp. 45

New e-mail

Silent mode (Vibration)

Silent mode (Mute)

New voicemail

Call diverting feature active

Mute mode, during a call

Battery power level

ꢀp. 87

Home Zone, if registered for the

appropriate service

* Depending on your country or service provider, the

icons shown on the display may vary.

Get started

Access menu functions

Select an

option

1. Press a desired soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

Select

Back

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

Press the right

soft key to return

to the previous

menu level.

Press the left

•

Press [ ] to return to Idle

mode.

soft key to select

the highlighted

option.

Use shortcuts Press the number key

corresponding to the option you

want. For the menu numbers 10,

11, and 12, press [0], [ ], and [

respectively.

]

Customise your phone

You can set wallpaper for the idle

screen on the display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings

settings Language

2. Select a language.

→

Phone

language

and select Settings

settings Wallpaper

Wallpaper image

→

Display

→

2. Select an image or a video

category.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

3. Select an image or a video.

4. Press <Select>.

2. Select a ringtone category.

3. Select a ringtone.

5. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

4. Press <Save>.

Menu mode

skin colour

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

Get started

You can set the Navigation keys to

function as shortcuts to access

your favourite menus.

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

shortcuts

1. In Idle mode, press <Menu

and select Settings Phone

settings Shortcuts

2. Select a key.

→

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

3. Select a menu to be assigned to

the key.

00000000, and press <OK>.

3. Enter a new 4- to 8-digit

You can switch the phone to Silent

mode to avoid disturbing other

people.

Silent mode

password and press <OK>.

4. Enter the new password again

and press <OK>.

Press and hold [ ] in Idle mode.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Make/Answer calls

Step outside the phone

Begin with your camera, the music player, the web

browser, and other special features

1. In Idle mode, enter an area

Make a call

code and a phone number.

2. Press [ ].

Use the camera

3. To end the call, press [ ].

1. In Idle mode, press and hold

Take a photo

1. When the phone rings, press

[Camera] to turn on the

camera.

Answer a call

[

2. To end the call, press [ ].

2. Aim the lens at the subject and

make any desired adjustments.

Press [Volume].

3. Press [ ] or [Camera] to take

a photo. The photo is saved

automatically.

Adjust the

volume during

a call

4. Press <Preview> to take

another photo.

Step outside the phone

1. In Idle mode, press <Menu

and select My files Images

My photos

1. In Idle mode, press <Menu

and select My files Videos

My video clips

View a photo

Play a video

→

2. Select the photo you want.

2. Select the video you want.

Play music

1. In Idle mode, press and hold

[Camera] to turn on the

camera.

Record a video

Use these methods:

Copy music

files to the

phone

2. Press [1] to switch to Record

•

Download from the wireless

web p. 48

Download from a computer

using the optional Samsung PC

Studio Samsung PC Studio

mode.

ꢀ

3. Press [ ] or [Camera] to start

recording.

ꢀ

4. Press [ ], < >, or [Camera]

to stop recording. The video is

saved automatically.

User’s Guide

•

Receive via Bluetoothꢀp. 91

5. Press <Preview> to record

another video.

1. In Idle mode, press <Menu

and select Applications

Music player

2. Press <Options> and select

Add to playlist Add all or

Add files

1. From the music player screen,

press [ ].

Create a play

list

Play music

files

→

2. During playback, use the

following keys:

→

•

: pauses or resumes

playback.

3. For Add files, press [ ] to

select the files you want and

press <Select>.

•

Left: returns to the previous

file.

Right: skips to the next file.

Up: opens the play list.

Volume: adjusts the

volume.

•

4. Press <Back> to return to the

music player screen.

•

Down: stops playback.

Step outside the phone

Browse the web

Use Phonebook

Using a built-in web browser, you can easily access the

wireless web to get a variety of up-to-date services

and information and to download web content.

To the phone’s memory:

Add a contact

1. In Idle mode, enter a phone

number and press <Options>.

In Idle mode, press [ ].

2. Select Save contact

a number type.

→

Phone

Launch the

web browser

→

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

To select an item, press [ ].

4. Press <Save> to save the

To return to the previous page,

press <Back>.

contact.

•

To move to the next page, press

Options> and select Go

Forward

To access options, press

Options>.

→

To the SIM card:

1. In Idle mode, press <Menu

and select Phonebook My

namecard

Create and

send a name

card

→

1. In Idle mode, enter a phone

number and press <Options>.

2. Specify your contact

information.

2. Select Save contact

→

SIM.

3. Enter a name.

3. Press <Save> to save the

4. Press <Save> to save the

name card.

contact.

4. To send the name card, press

Options> and select Send

→

1. In Idle mode, press

Find a contact

via a sending method.

<Contacts>.

2. Enter the first few letters of the

name you want.

3. Select a contact.

4. Scroll to a number and press

[

]

to dial, or press [ ] to

edit contact information.

Step outside the phone

Send messages

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

Send a text

message (SMS)

5. For Image and video, select

Add image or Add video and

add an image or video clip.

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

→

For Sound, select Add sound

and add a sound clip.

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

6. Select Message

7. Enter the message text and

press [ ].

8. Press <Options> and select

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

Send

→

multimedia

message

(MMS)

9. Enter destination numbers or

addresses.

message

→

10.Press [ ] to send the message.

2. Select Subject

3. Enter the message subject and

press [ ].

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messages

message Email

2. Select Subject

→

Create

When a notification appears:

View a text

message

→

1. Press <View>.

2. Select the message from the

Inbox.

3. Enter the e-mail subject and

press [ ].

From the Inbox:

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

→

[

→

2. Select an SMS message (

7. Add image, video, sound, music

files, or document files.

When a notification appears:

1. Press <View>.

View a

multimedia

message

8. Press <Options> and select

Send

2. Press <Options> and select

9. Enter e-mail addresses.

Retrieve

10.Press [ ] to send the e-mail.

3. Select the message from the

Inbox.

Step outside the phone

Use Bluetooth

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

View a

Your phone is equipped with Bluetooth technology,

enabling you to connect the phone wirelessly to other

Bluetooth devices and exchange data with them, talk

hands-free, or control the phone remotely.

multimedia

message

(continued)

→

2. Select an MMS message (

1. In Idle mode, press <Menu

and select Settings

Bluetooth Activation

Turn on

Bluetooth

→

1. In Idle mode, press <Menu

View an e-mail

→

On.

and select Messages

messages Email inbox

2. Select an account.

→

2. Select My phone’s visibility

→

On to allow other devices to

find your phone.

3. Press <Yes> to download new

e-mails or headers.

4. Select an e-mail or a header.

5. If you selected a header, press

<Options> and select

Retrieve to view the body of

the e-mail.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

1. Access an application,

Phonebook My files, or

Calendar

Send data

Search for and

pair with a

Bluetooth

device

→

Search for new devices

2. Scroll to an item.

2. Select a device.

3. Press <Options> and select

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

Send via

→

Bluetooth.

4. Select a device.

5. If necessary, enter the

When the owner of the other

device enters the same code,

pairing is complete.

Bluetooth PIN and press <OK>.

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

1. When a device attempts to

access your phone, press

<Yes> to permit the

connection.

2. If necessary, press <Yes> to

confirm that you are willing to

receive.

Step outside the phone

Watch the phone display on a TV

1. With the TV switched on,

connect your phone to the TV

with a TV out cable, as shown.

Transfer

phone display

to a TV

You can view the display of your phone on a TV screen

by connecting the phone and TV with a TV out cable.

This enables you to enjoy the photos, videos and

music stored in the phone’s memory with your family

or friends on a larger screen.

•

Depending on your particular

TV model, the location and

shape of the video input and

audio output ports may vary.

Match cable connector and TV

port colours.

Important TV

information

2. Switch the TV to External Input

mode.

The display switches to TV Out

mode and you can view the

phone’s display on the TV

screen.

•

Depending on the video

system, the image may vibrate

or in some other way be less

than optimal.

•

Depending on the video quality,

some video files may not

display.

You cannot use a Bluetooth

stereo headset or the zooming

feature in TV Out mode.

3. If necessary, set the video

system for your TV in the TV-

out settings menu.ꢀp. 84

4. Access the application you want

and open files.

Using AB mode

Press the appropriate key until the character you want

appears on the display.

Enter text

AB, T9, Number, and Symbol modes

You can enter text in some features, such as

Messages, Phonebook, or Calendar using AB mode, T9

mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9 mode

) and AB mode ( ). Depending on your

(

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

mode (

Press and hold [ ] to switch to Symbol mode.

(Creating an SMS message with GSM-Alphabet encoding)

Other AB mode operations

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Enter text

•

Press [ ] to insert a space.

For example, Of and Me use [6] and [3].

•

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

Other T9 mode operations

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

Entering a word in T9 mode

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add appears on the bottom line.

2. Enter the whole word before editing or deleting

characters.

3. Press <Add>.

3. When the word displays correctly, go to step 4.

4. Enter the word you want using AB mode and press

Otherwise, press [

0] to display alternative word

<OK>.

choices for the keys that you have pressed.

Using Number mode

Number mode enables you to enter numbers.

Call functions

Advanced calling features

Press the keys corresponding to the digits you want.

Making a call

1. In Idle mode, enter the area code and phone

number.

Using Symbol mode

Symbol mode enables you to insert symbols.

• Press [

hold [

move the cursor to edit an incorrect digit.

• Press and hold

numbers.

] to clear the last digit or press and

Press

C] to clear the whole display. You can

display more symbols

select a symbol

[Up] or [Down].

[

]

to enter a pause between

the corresponding

number key.

2. Press [ ].

clear the entered symbols

insert the symbols

[C].

3. When you want to end the call, press [ ].

<OK>.

Making an international call

1. In Idle mode, press and hold [

appears.

0]. The

character

2. Enter the country code, area code, and phone

number, then press [ ].

Call functions

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

2. Scroll to the number you want and press [ ].

Press <Accept> or [ ] to answer the call.

Making a call from Phonebook

Tips for answering a call

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

•

When Anykey answer is active, you can press

any key, except for <Reject> and [ ].

ꢀp. 83

Phonebook.ꢀp. 33

•

Press <Reject> or [ ] to reject a call.

You can also use the speed dial feature to assign your

most frequently dialled numbers to specific number

Press and hold [Volume] to reject a call or mute

the ringer, depending on the Volume key setting.

keys.ꢀp. 36

ꢀp. 83

You can quickly dial a number from the SIM card using

its location number assigned when stored.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

1. In Idle mode, enter a location number and press

[

2. Press [Left] or [Right] to scroll through other

numbers.

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

3. Press <Dial> or [ ] to dial the number you want.

Press [Volume up] to increase the volume level and

[Volume down] to decrease the volume level.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Placing a call on hold/Retrieving

Press <Hold> to place a call on hold, or press

Connect the headset to the jack on the right side of

the phone. The button on the headset works as

follows:

<Retrieve> to retrieve the call.

Making a second call

You can make another call if your network supports

this function.

Press

redial the last call

answer a call

end a call

the button twice.

the button.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

4. Press <Options> and select End held call to end

Options during a call

You can access a number of functions during a call.

the call on hold.

5. To end the current call, press [ ].

Adjusting the volume during a call

Use [Volume] to adjust the earpiece volume during a

call.

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports this function and you

have activated the call waiting feature.

ꢀp. 87

Call functions

1. Press [ ] to answer the call. The first call is

automatically put on hold.

•

Menu: access the phone's menu functions.

Voice off Voice on: switch off the phone's

2. Press <Swap> to switch between the calls.

microphone so that the other person on the phone

cannot hear you, or switch it back on.

3. Press <Options> and select End held call to end

the call on hold.

•

Mute keys/Send keys: switch the key tones off

or on.

4. To end the current call, press [ ].

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Using the speakerphone feature

Use the speakerphone to talk and listen with the

phone a short distance away. Press [ ] and then

•

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

[

Yes> to activate the speakerphone feature. Press

] again to switch back to the earpiece.

Using In-call options

Press <Options> to access the following options

during a call:

•

Speaker on

feature or switch back to Normal mode.

Switch to headset Switch to phone: switch the

call to a Bluetooth headset or hands-free car kit or

back to the phone.

/Normal: turn on the speakerphone

•

Phonebook: access the contact list.

End held call: disconnect the call currently on

hold.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

Menu functions

All menu options listed

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

Call log (Menu 1)

Select one: select one of the multi-party call

participants. You can then use the following

options:

Use this menu to view the calls you have dialled,

received, or missed, and the length of the calls. You

can also check the cost of your calls, if your SIM card

supports this function.

Private: have a private conversation with the

selected participant. The other participants can

converse with each other. After the private

conversation, select Join to return both private

participants to the multi-party call.

To access this menu, press <Menu> in Idle mode and

select Call log

Recent contacts (Menu 1.1)

Remove: disconnect the selected participant.

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call log

1. Press [Left] or [Right] to move to another call

type.

2. Press [Up] or [Down] to scroll through the call list.

Menu functions

3. Press [ ] to view the details of a call, or [ ] to

dial a number.

Received calls (Menu 1.4)

This menu displays the most recent calls you have

received.

Using call log options

While viewing call details, press <Options> to access

the following options:

Delete all (Menu 1.5)

Use this menu to delete all of the records in each call

type.

•

Call: edit the number and dial it.

Add to Phonebook: save the number to

Phonebook.

1. Press [ ] to select the call types to be cleared.

2. Press <Delete>.

•

Send: send an SMS or MMS message to the

selected number.

3. Press <Yes> to confirm the deletion.

Delete: delete the selected call log or all logs.

Call time (Menu 1.6)

Missed calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the most recent calls you did not

answer.

•

Last call time: check the length of your last call.

Dialled calls (Menu 1.3)

Total dialled calls: check the total length of all

the calls you have dialled.

This menu displays the most recent calls you have

dialled.

•

Total received calls: check the total length of all

the calls you have received.

To reset the call timers, press <Reset>. You need to

enter the phone password.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

The password is preset to 00000000. You can

change this password.ꢀp. 92

Call costs (Menu 1.7)

To access this menu, press <Menu> in Idle mode and

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for contacts in Phonebook.

You can quickly access this menu by pressing

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max. cost, you must reset the counter before

you can make another call.

<Contacts> in Idle mode.

Finding a contact

1. Enter the first few letters of the name that you

want to find.

•

Max. cost: check the maximum cost limit set in

Set max. cost

2. Select the name from the list.

•

Reset counters: reset the cost counters.

3. Scroll to a number and press [ ] to dial, or press

Set max. cost: set the maximum cost authorised

for your calls.

[

] to edit contact information.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

Menu functions

•

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Finding a contact in Idle mode

You can find contacts in Idle mode, by the spelling of a

contact name. The phone searches for the contact

names starting with the letters labelled on any of the

keys you pressed.

Delete: delete the selected contact.

Create contact (Menu 2.2)

1. In Idle mode, press the number keys containing

the letters you want.

Use this menu to add a new contact to Phonebook.

Storing a contact in the phone’s memory

2. Press <Options> and select Search as spelling

1. Select Phone

The phone searches Phonebook for the matching

contacts and shows results.

2. Change the settings or enter information about the

contact.

Using Phonebook options

•

First name

Mobile Home

number in any type.

Last name: assign a name.

While viewing contact details, press <Options> to

access the following options:

Office Fax Other: add a

•

Email: assign an e-mail address.

Caller ID: assign an image or a video to alert

you to a call from the person.

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the number to a caller group.

Memo: add a memo about the person.

•

Edit: edit contact information.

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Copy to: copy the contact to the phone’s memory

or to the SIM card.

•

3. Press <Save> to save the contact.

4. Select the ringtone line and set a melody.

Storing a contact on the SIM card

1. Select SIM

2. Enter information about the contact.

5. Press <Save> to save the group.

Adding members to a caller group

1. Select a group.

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

2. Press <Add>.

3. Press [ ] to select the contacts to be added.

4. Press <Select>.

To assign a caller ID image or video, ringtone, or

group, the contact must be saved to the phone’s

memory.

Managing caller groups

3. Press <Save> to save the contact.

While viewing the group list, press <Options> to

access the following options:

Group (Menu 2.3)

•

View: display the members of the selected group.

Create group: add a new group.

Use this menu to organise your contacts in caller

groups.

Edit: change the group properties.

Creating a caller group

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

1. Press <Options> and select Create group

•

Delete: delete the selected group or all groups.

Group members, however, will not be deleted from

Phonebook.

2. Enter a name for the group.

3. Select the caller ID line and set an image.

Menu functions

Dialling speed dial numbers

Speed dial (Menu 2.4)

In Idle mode, press and hold the appropriate key.

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently dialled numbers.

My namecard (Menu 2.5)

Assigning speed dial numbers

Use this menu to create a name card and send it to

other people.

1. Select a key location from

for your voicemail server.

9. Key

is reserved

Saving your name card

2. Select a contact from the contact list.

The procedure for creating your name card is the

same as the one for saving a phone number in the

3. Select a number, if the contact has more than one

number.

phone’s memory.ꢀp. 34

Managing speed dial entries

Using namecard options

From the Speed dial screen, press <Options> to

access the following options:

After saving your name card, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

•

Edit: edit the name card.

View: check the name and number assigned to a

key.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

•

Change: assign a different number to a key.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

Remove: clear the speed dial setting for a key.

Delete: delete the name card.

Own number (Menu 2.6)

Service number (Menu 2.8)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

Management (Menu 2.7)

1. Scroll to the number you want and press <View>.

Use this menu to manage contacts in Phonebook.

2. Press <Dial> or [ ].

•

Save new contact to: select a default memory

location for saving contacts. If you select Always

ask, the phone will ask you to select a memory

location each time you save a number.

•

Copy all to: copy all of the contacts stored on the

SIM card to the phone’s memory, or vice versa.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

Menu functions

Downloading or receiving music files

Applications (Menu 3)

Your phone supports *.mp3, *.aac, and *.m4a files

from the phone’s memory.

Use this menu to play music files or Java games, or

edit photos. You can also use convenient features,

such as a voice recorder, alarm clock, calculator,

converter, timer, and stopwatch.

Use these methods to save music files to your phone’s

memory:

•

Download from the wireless web

ꢀp. 48

To access this menu, press <Menu> in Idle mode and

select Applications

Download from a computer using the optional

Samsung PC Studio

ꢀSamsung PC Studio User’s

Music player (Menu 3.1)

Guide

•

Receive via an active Bluetooth connectionꢀp. 91

Use this menu to enjoy music. First, you need to save

music files into your phone’s memory.

The downloaded or received files are stored in the

Music folder. p. 69

ꢀ

To enjoy high quality music, you can use an optional

Bluetooth stereo headset.

Creating a play list

1. From the music player screen, press <Options

Normal headsets and Bluetooth mono headsets are

not compatible with the music player.

and select Add to playlist

→

Add all or Add files.

2. For Add files, press [ ] to select the files to be

added and press <Select>.

3. Press <Back> to return to the music player

screen.

Playing music files

1. From the music player screen, press <Options

Key

Function

Changes the repeat mode.

Changes the equaliser mode.

Turns Shuffle mode on or off.

and select Play via

2. Select Phone to use the phone speaker.

Select Bluetooth stereo headset to use a

Bluetooth headset, and then search for and

connect the phone to the headset.

Camera

Locks the keys when held down to keep

accidental presses from affecting

playback.

During playback, use the following keys:

Key

Function

Using music player options

Pauses or resumes playback.

Returns to the previous file.

Skips to the next file.

Opens the play list.

From the music player screen, press <Options> to

access the following options:

Left

Right

•

Play via

/Pause: begin or pause playback.

Transfer to Bluetooth stereo headset

Transfer to phone: switch sound output to a

Bluetooth stereo headset or back to the phone

speaker.

Down

Volume

Stops playback.

Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

•

Open: access the play list of the current album or

album list. On the album list, you can set up

multiple albums.

Menu functions

•

Go to Music: access the Music folder.

Volume: select a volume level.

•

Send via: send the file via e-mail or Bluetooth.

•

Details: access the file properties.

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Key management: manage the licence keys you

have acquired.

•

Activate key: get a new licence key when the key

for the selected DRM files expires.

Accessing the play list

From the music player screen, press [Up].

Press <Options> to access the following options:

Remove from playlist: remove the selected file

from the play list.

•

Play via: play the currently selected file via the

phone speaker or a Bluetooth stereo headset.

Settings: change the default settings for playing

music files.

Repeat mode: select a repeat mode.

•

Add to playlist: add files to the play list.

Go to album list: access the album list.

Shuffle: set the music player to play tracks in

random order.

Move to: move the selected file to another album.

Copy to: copy the selected file to another album.

MP3 overrides other sounds: set the music

player to continue playback even if you exit it.

Move track in playlist: move the selected file to

the position you want within the play list.

Equaliser: select an equaliser setting.

3D sound: turn 3D sound on or off.

•

Activate key: get a new licence key when the key

for the selected DRM file expires.

Visualisation: change the playback animation

and select the length of time the backlight remains

on while playing music files.

Remove: remove the selected file or all files from

the play list.

•

Details: access the file properties.

During playback, use the following keys:

Key management: manage the licence keys you

have acquired.

Key

Function

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Stops playback.

Voice recorder (Menu 3.2)

Left

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Right

Volume

Down

Recording a voice memo

1. Press [ ] to start recording.

2. Speak into the microphone.

Press [ ] to pause or resume recording.

Changing the recording mode

You can change the recording mode of the voice

recorder. The maximum recording time is determined

by this setting. Before recording a memo, press

3. Press <Stop> or [Down] to end recording. The

voice memo is saved automatically.

4. Press [ ] to review the voice memo, or [Up] to

record a new memo.

Options> and select Settings

→

a recording mode:

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

Playing a voice memo

•

Limit for email: record a voice memo for adding

to an e-mail.

1. From the Voice recorder screen, press <Options

and select Go to My voice clips

Maximum 1 hour: record a voice memo of up to

one hour.

2. Select a voice memo.

Menu functions

3. Press <Done>.

Image editor (Menu 3.3)

4. Press <Options> and select Save as

Use this menu to edit your photos using various

editing tools.

5. Enter a new file name and press <OK>.

Cropping

Applying an effect

1. Select a photo or take a new photo.

1. Press <Options> and select New image

or Take photo

→

Open

2. Press <Options> and select Crop

2. Select a photo or take a new photo.

3. Move the cropping frame to the area of the image

you want.

3. Press <Options> and select Effects

→

an effect

option.

Press <Options> and select Resize to change the

frame size.

4. Press <Done>.

4. Press <Options> and select Done

5. Press <Options> and select Save as

6. Enter a new file name and press <OK>.

Transforming

1. Select a photo or take a new photo.

Adding visual features

2. Press <Options> and select Transform

→

You can decorate photos by adding a frame, an image,

or a note.

option:

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

1. Select a photo or take a new photo.

2. Press <Options> and select Insert

→

a feature

type.

3. Select an item or enter text to be inserted.

5. Press <Options> and select Merge. The stamp

photo is added to the background photo as an

outline.

4. Adjust the position of the inserted item and press

<Done>.

6. Press <Options> to access the following stamp

5. Press <Options> and select Save as

edit options:

6. Enter a new file name and press <OK>.

•

Resize: change the stamp size.

Move: change the position of the stamp.

Rotate: rotate the stamp.

Stamp colour: change the stamp colour.

Shadow on: apply a shadow to the stamp.

Merging a stamp effect

This editing tool allows you to make an outline stamp

of a photo and then merge it with another photo. You

can use this tool to create your own photo postcard by

taking a photo of a handwritten message and merging

it with a photo.

7. When you have finished, press <Options> and

select Done

8. Press <Options> and select Save as

9. Enter a new file name and press <OK>.

1. Select a photo or take a new photo.

2. Press <Options> and select Merge stamp. The

background photo appears in the image box next

3. Press <Options> and select Add image

4. Add a photo by selecting or taking a photo. The

added photo appears in the image box next to

. This will be the stamp.

Menu functions

•

Upgrade: upgrade the application to the latest

version.

Java world (Menu 3.4)

Use this menu to access the embedded Java games

and downloaded Java applications.

Send information via Text message: send the

URL containing the application via SMS.

Accessing an embedded game

Memory status: access memory information for

applications.

1. Select My games

→

a game.

2. If necessary, press [ ].

Settings: select a connection profile to be used for

applications requiring network access. You can also

Using Java application options

create or edit a profile.ꢀp. 93

From the application list, press <Options> to access

the following options:

World clock (Menu 3.5)

•

Start: launch the selected application.

Use this menu to set your local time zone and find out

the current time in another part of the world.

Move to: move the application to another folder.

Delete: delete the selected application or all

applications, except for the embedded games.

Viewing world time

1. From the world map, press [Down].

•

Protection: lock the application to protect it from

being deleted, or unlock the application.

2. Press [Left] or [Right] to scroll to the city you

want. As the time line moves, the time and date of

the given zone display.

•

Details: access the application properties.

Permissions: set permission settings for services

charging you additional costs, such as network

access and SMS.

3. Press [ ] to save the city as your local time zone.

•

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

Applying daylight saving time

1. From the world map, press <Options> and select

Apply daylight saving time

3. Press <Save>.

2. Press [ ] to select the time zones you want.

Stopping an alarm

3. Press <Save>.

•

For a non-wake-up alarm, press any key.

For a wake-up alarm, press <Confirm> or [ ].

Press any key, except <Confirm> and [ ], to

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Alarm (Menu 3.6)

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line and press <Save>.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

Setting alarms to sound when the phone is off

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

From the Alarm screen, select Auto power

If the phone is off when it is time for the alarm to

sound, the phone switches on and sounds the alarm.

→

On.

•

AM/PM: select AM or PM in 12-hour time

format.

Menu functions

Calculator (Menu 3.7)

Converter (Menu 3.8)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

Use this menu for common conversions, such as

currency and temperature.

1. Select a converter.

1. Enter the first number.

2. Press [Left] or [Right] to select the original unit

and press [Down].

•

Press <.()> to insert a decimal point or

bracket.

3. Enter the value to be converted and press [Down].

•

Press [ ] or [ ] to move the cursor.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

2. Press one of the Navigation keys to access the

math function you want.

3. Enter the second number.

4. Press [Left] or [Right] to select the unit to which

you want to convert.

4. Press [ ] to view the result.

5. If necessary, repeat from step 2 to continue the

calculation.

The equivalent value for the amount you entered

displays.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

Timer (Menu 3.9)

Key management (Menu 3.11)

Use this menu to set a period of time for the phone to

count down. The phone sounds an alarm when the

specified period of time expires.

Use this menu to manage the licence keys you have

acquired to activate media contents locked by DRM

systems.

Press <Options> to access the following options:

Starting the timer

1. Press <Set>.

•

View: open the corresponding media content.

Delete: delete the selected licence key or all

licence keys.

2. Enter the length of time you want to count down

and press <OK>.

•

Go to my items: access the corresponding file

folder.

3. Press [ ] to start counting down.

Stopping the timer

Details: access the properties of the licence key.

•

Press any key when the timer rings.

SIM AT (Menu 3.12)

•

Press [ ] on the Timer screen to stop the timer

before it rings.

This menu is available if you use a SIM AT card that

supports SIM Application Toolkit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Stopwatch (Menu 3.10)

Use this menu to measure elapsed time. The

maximum time is 10 hours.

1. Press [ ] to start the stopwatch.

2. Press [ ] to check an interval. You can repeat this

step for a total of 3 intervals.

Menu functions

Browser (Menu 4)

Press

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

return to the previous

page

Back>, or <Options>

and select Go

→

Back.

move to the next page

<Options> and select Go

→

Forward

To access this menu, press <Menu> in Idle mode and

Using page options

select Browser

From any web page, press <Options> to access the

following options:

Home (Menu 4.1)

•

Go to: access the linked web page.

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [ ] in Idle mode.

Go to homepage: return to the homepage.

Keys to buy: send a request for buying a licence

key for a DRM file. This option will be available only

when you access the web browser from a message

containing a DRM file.

Navigating the web

Press

•

Enter URL: enter a URL address manually.

scroll through browser

items

[Up] or [Down].

Go: move backward or forward through pages in

history.

select a browser item

[

], or <Options> and

•

Reload: reload the current page with updated

information.

select Go to

•

Bookmarks: bookmark the current page or access

the bookmark list.

About browser: access version and copyright

information about the browser.

Send URL: send the URL of the current page via

SMS or e-mail.

Exiting the browser

Press [ ] to end the network connection and exit the

browser.

To SmartFit view/To Desktop view: change the

display mode of the browser.

•

Save: save the selected image or page.

Page details: access the page properties.

Enter URL (Menu 4.2)

Use this menu to manually enter a URL address and

access the associated web page.

Browser options: change the various settings for

the browser.

You can add the entered URL to the bookmark list by

selecting Add bookmark

Cache: change the cache mode or clear the cache.

The cache is a temporary memory that stores

recently accessed web pages.

Bookmarks (Menu 4.3)

Cookies: change the cookie acceptance mode or

delete cookies. Cookies are pieces of personal

information sent to a web server while navigating

the web.

Use this menu to save URL addresses in order to

quickly access web pages.

Adding a bookmark

Preferences: change the browser display and

sound settings.

1. Press <Add>. If a bookmark has already been

saved, press <Options> and select Add

bookmark

Certificates: access certificate information.

Menu functions

2. Enter a title for the bookmark and press [Down].

Saved pages (Menu 4.4)

3. Enter a URL address and press <Save>.

You can access the list of pages you have saved while

online.

Accessing a bookmarked page

If you select a link on the page, the phone switches to

online to access the linked page.

Selecting a bookmark item launches the web browser

and accesses the associated web page.

History (Menu 4.5)

Using bookmark options

You can access the list of pages you have accessed

recently.

On the Bookmarks screen, press <Options> to access

the following options:

•

Go to: access the bookmarked web page.

Go to homepage: access the homepage.

Enter URL: enter a URL address manually.

Select a URL from the list to access the corresponding

web page.

Clear cache (Menu 4.6)

Edit bookmark: edit the URL address and title of

the bookmark.

Use this menu to clear information stored in the cache,

a temporary memory that stores recently accessed

web pages.

•

Add bookmark: add a new bookmark.

Send URL: send the URL address of the bookmark

via SMS.

•

Delete: delete the selected bookmark or all

bookmarks.

Browser settings (Menu 4.7)

Messages (Menu 5)

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also create or

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also access push messages and cell broadcast

messages.

edit a profile.ꢀp. 93

Streaming settings (Menu 4.8)

To access this menu, press <Menu> in Idle mode and

Use this menu to select a connection profile to be used

for accessing your service provider’s streaming

service. This menu may not be shown depending on

your service provider. You can also create or edit a

select Messages

Create message (Menu 5.1)

Use this menu to create and send messages.

profile.ꢀp. 93

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

Menu functions

Creating and sending an SMS message

•

Add image/Add animation/Add melody: attach

a simple image, an animated image, or a melody.

1. Enter your message and press [ ].

Attach: attach a name card or calender data as a

data format attachment.

• The maximum number of characters allowed

in a message varies by service provider. If

your message exceeds the maximum number

of characters, the phone will split the

message.

Save in: save the message in another message

folder.

Input language: change the language to be used

in T9 input mode.

• You can use various options by pressing

<Options>.ꢀnext section

•

Text style: change the text attributes.

2. Enter a destination number.

Input method: change the text input mode.

To send the message to more than one recipient,

fill in additional destination fields.

Multimedia message (Menu 5.1.2)

3. Press [ ] to send the message.

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

Using options while composing an SMS message

While composing a message, press <Options> to

access the following options:

Creating and sending an MMS message

1. Select the Subject line.

•

Save and send: save the message in Sentbox

and then send it.

You can use various options by pressing

Options> in each field.

ꢀnext section

•

Send only: just send the message.

Insert: add a template, Phonebook entry, or

bookmark to text.

2. Enter the message subject and press [ ].

3. Select the Image and video line.

Using options while composing an MMS message

4. Select Add image or Add video and add an

While composing a message, press <Options> to

access the following options:

image or a video clip.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

Add: add the message subject or message text.

Add image Add video Add sound: add an

image, video clip, or sound clip.

Change image Change video/Change sound:

•

replace an added item.

5. Select the Sound line.

•

Edit: edit the subject or text.

6. Select Add sound and add a sound clip.

7. Select the Message line.

Preview: view the message as it will be shown on

the recipient’s phone.

8. Enter the message text and press [ ].

•

View: open the selected attachment.

9. When you have finished, press <Options> and

Send: send the message.

select Send

Save in: save the message in another message

folder.

10.Enter a phone number or an e-mail address.

To send the message to more than one recipient,

fill in additional destination fields.

•

Add page: add pages. Move to each page by

pressing [Left] or [Right].

11.Press [ ] to send the message.

•

Delete page: delete a page.

Edit page: change the duration of page display or

move the page forward among the other pages.

Menu functions

•

Attach: attach a Phonebook entry as a name card

or calender data as a data format attachment, or a

document file stored in the Other files folder.

6. Add media files, document files stored in the

Other files folder, or Phonebook entries as name

cards or calender data as data format

attachments.

•

Remove subject

media Remove sound

added item.

/Remove message

/Remove

Remove: remove an

Depending on the file type or DRM (Digital Rights

Management) system, some files may not be

able to be forwarded.

Email (Menu 5.1.3)

7. When you have finished, press <Options> and

You can create and send e-mails that include text,

audio, and images.

select Send

8. Enter an e-mail address.

Creating and sending an e-mail

1. Select the Subject line.

To send the e-mail to more than one recipient, fill

in additional destination fields.

You can use various options by pressing

9. Press [ ] to send the e-mail.

<Options> in each field.ꢀnext section

Using options while composing an e-mail

2. Enter the subject of your e-mail and press [ ].

3. Select the Message line.

While composing an e-mail, press <Options> to

access the following options:

4. Enter the e-mail text and press [ ].

5. Select the File attached line.

•

Add: add the subject of your e-mail or e-mail text.

Edit: edit the subject or text.

Add image/Add video/Add sound/Add music:

add media files stored in the phone’s memory.

•

Add other files: add document files stored in the

Other files folder.

Viewing a message

The following icons may appear on the message list to

show the message type:

•

Send: send the e-mail.

Save in: save the e-mail in another message

folder.

•

SMS

MMS

•

Attach: attach Phonebook entries as name cards

or calender data as data format attachments.

MMS notification ( : Being retrieved,

: Failed to retrieve)

Remove subject/Remove message: clear the

subject or text.

•

Voicemail

Push message from web servers or

Configuration message, containing network

parameters from your service provider

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

•

CB (Cell broadcast) message from your

service provider

Delivery report for your sent messages

My messages (Menu 5.2)

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Use this menu to access messages you have received,

sent, or which have failed in sending.

• A

icon next to a message means that the

Inbox (Menu 5.2.1)

message is of high priority. A grey-coloured

message icon indicates low priority.

This folder stores all of the messages you have

received, except for e-mails.

Menu functions

Using message options

MMS messages

•

Retrieve: retrieve the MMS message from the

MMS server.

While viewing a message, press <Options> to access

the following options:

Reply via text message: reply to the sender via

SMS.

SMS messages

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

Reply via multimedia message to: reply to the

sender via MMS.

•

Forward: forward the message to other people.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Delete: delete the message.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut media: save media content from the message

to your phone’s memory.

Cut media: save media content from the message

to your phone’s memory.

Protection: protect the message from being

deleted.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

Details: access the message properties.

Configuration messages

•

Add to Block list: add the sender’s number to the

Block list to reject the messages from the sender.

•

Install: apply the configuration specified in the

message to your phone.

•

Delete: delete the message.

•

Protection: protect the message from being

deleted.

•

Protection: protect the report from being deleted.

Drafts (Menu 5.2.2)

Push messages

This folder stores messages you have saved to send at

a later time.

•

Go to URL: connect to the URL specified in the

message.

When you select a message, it opens in Edit mode so

that you can edit and send the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Delete: delete the message.

Outbox (Menu 5.2.3)

Protection: protect the message from being

deleted.

This folder stores messages that the phone is

attempting to send or has failed to send.

Broadcast messages

The following icons are available to show the message

status:

•

Save: save the message to the phone’s memory.

•

Being sent

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Failed to be sent

•

Delete: delete the message.

While viewing a message, press <Options> to access

the following options:

Delivery reports

•

Send again: retry sending the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the report.

Forward: forward the message to other people.

•

Delete: delete the report.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Menu functions

•

Delete: delete the message.

Email inbox (Menu 5.2.5)

•

Protection: protect the message from being

deleted.

This folder stores e-mails that you have received.

Viewing an e-mail

•

Details: access the message properties.

1. Select an e-mail account.

2. Press <Yes> when Check for new email

displays, or press <Options> and select Check

for new mail. The phone checks the e-mail server

and downloads new e-mails.

Sentbox (Menu 5.2.4)

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

The following icons may appear on the list to show

the e-mail status:

•

Send: send the MMS message.

Forward: forward the message to other people.

•

Retrieved from the server

Being retrieved

Failed to be retrieved

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Delete: delete the message.

icon next to a message means that the message

is of high priority. A grey-coloured message icon

indicates low priority.

Protection: protect the message from being

deleted.

•

Details: access the message properties.

3. Select an e-mail or a header.

4. Press [Left] or [Right] to view other pages in the

e-mail.

5. Press [ ] or [ ] to view the previous or next

e-mail.

Using e-mail options

My folders (Menu 5.2.6)

While viewing the e-mail or header, press <Options

to access the following options:

Use this menu to create new folders and organise your

messages.

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

Creating a folder

1. Press <Yes>.

•

Reply: send a reply to the sender, or to the sender

and all of the other recipients.

2. Enter a folder name and press <OK>.

Using folder options

•

Forward: forward the e-mail to other people.

On the folder list, press <Options> to access the

following options:

Delete: delete the e-mail.

Add to filtering list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that subject.

•

Open: open the selected folder.

Create folder: add a new folder.

Rename folder: change the folder name.

Delete: delete the selected folder.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

Attached items: save the attached files from the

e-mail to your phone’s memory.

•

Protection: protect the e-mail from being deleted.

Details: access the e-mail properties.

Menu functions

Multimedia message templates (Menu 5.3.2)

Templates (Menu 5.3)

You can access embedded MMS templates or ones you

have saved so that you can use them when composing

an MMS message.

Use this menu to make and use templates of

frequently used messages or passages.

Text message templates (Menu 5.3.1)

From the template list, press <Options> to access

the following options:

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

•

View: open the selected template.

Edit: edit the template.

Creating a template

Send message: send the selected template via

MMS.

1. Select an empty location.

2. Enter a message and press <OK>.

Using template options

•

Delete: delete the selected template or all

templates, except for the embedded ones.

From the template list, press <Options> to access

the following options:

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder all at once.

•

Edit: edit the selected template.

Send message: create and send a new message

using the selected template.

1. Press [ ] to select the message folders to be

cleared.

•

Delete: delete the selected template.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

Add new: add a new template.

2. Press <Delete>.

Use of Unicode encoding will reduce the maximum

number of characters in a message to about half. If

this menu is not shown, your phone provides

automatic character encoding by default.

3. Press [ ] to select the check box to delete

protected messages, and then press <Yes>.

4. Press <Yes> to confirm the deletion.

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

Settings (Menu 5.5)

•

Receiving options: activate 3D vivid view mode

for displaying received SMS messages on your

phone. The phone will convert message text to 3D

vivid graphics and displays it in 3D view mode.

This option is available only when the message

consists of a single page.

Use this menu to set up various options for using the

messaging service.

Text messages (Menu 5.5.1)

You can configure SMS settings.

•

Sending options: set up the options for sending

SMS messages:

•

Block list: store the phone numbers from which

you want to reject messages.

Send read receipt: send a read-reply requests

along with your messages.

Current profile: check or select an SMS setting

profile.

Send delivery receipt: set the network to inform

you when your messages have been delivered.

Profile settings: set the properties of each

profile:

Character support: select a character encoding

type. When you select Automatic, the phone

switches the encoding type from GSM-Alphabet to

Uni-Code if you enter a Unicode character.

Service centre: store or change the number of

your SMS server.

Menu functions

Default destination: enter the default

destination. It will be automatically entered on the

recipient list.

Expiry date: set the length of time messages are

stored in the MMS server.

Delivery time: set a time delay before messages

Default type: set the default message type. The

network can convert the messages into the

selected format.

are sent.

Outgoing message size: select a maximum size

of attached items allowed for messages.

Default validity: set the length of time your

messages are stored in the SMS server.

•

Retrieving options: set up the options for

receiving MMS messages:

Setting name: enter a profile name.

Reject unknown senders: reject messages from

unknown senders.

Multimedia messages (Menu 5.5.2)

Allow adverts: accept advertisements.

You can configure MMS settings.

Allow information: accept information

messages.

•

Sending options: set up the options for sending

MMS messages:

Allow reports: set the network to inform the

sender when a message has been delivered to you.

Delivery report: set the network to inform you

when your messages have been delivered.

Recep. in home network: determine if your

phone retrieves new messages automatically when

you are in your home service area.

Hide address: set your address to be hidden from

the recipient’s phone.

Read reply: send a read-reply request along with

your messages.

Reception when abroad: determine if your

phone retrieves new messages automatically when

you are roaming on another network.

Priority: set the priority level of messages.

Reception within home network or abroad has the

following options:

Send delivery receipt: set the network to inform

you when your e-mails have been delivered.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Send read receipt: send a read-reply request

along with e-mails.

Reply-To address: set an e-mail address to

Automatic: the phone automatically retrieves

messages from the server.

receive read-reply messages from recipients.

Priority: select the priority level of e-mails.

Reject: the phone rejects all messages.

Add signature: attach your name, phone number,

•

Multimedia message Profiles: select a

connection profile to be used for MMS. You can also

a simple memo, or a tag line to your e-mails.

Edit name: edit the name in your signature.

create or edit a profile.ꢀp. 93

Edit number: edit the phone number in your

signature.

Emails (Menu 5.5.3)

Edit note: edit the tag line in your signature.

You can configure e-mail settings.

•

Receiving options: set up the options for

receiving e-mails:

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Do not notify, use the Check for new

email option to receive new e-mails manually.

•

Sending options: set up the options for sending

e-mails:

Send copy to self: send a copy of your e-mails to

your e-mail account.

Menu functions

Read reply: determine whether or not the phone

sends a read-reply for incoming e-mails. If you

select Reply reminder, the phone asks you to

send a read-reply.

Account name: enter a name for the currently

selected account.

User name: enter a user name.

Email address: enter your e-mail address.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Download method: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Connect to POP3 server first/Connect to

IMAP4 server first: connect to the POP3 or

IMAP4 server before connecting to the SMTP

server to send e-mails.

Leave copy of messages on server: leave

copies of e-mails on the e-mail server after

retrieving.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Block list: specify e-mail addresses or subjects

you want to reject.

When the protocol type is POP3

•

Email accounts: set up an e-mail account and

select an account to be used.

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter the POP3 user name.

Password: enter the POP3 password.

Current account: check or select an account.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Same as IMAP4: select if you want the SMTP

server to have the same parameters as the

IMAP4 server.

Same as POP3: select if you want the SMTP

server to have the same parameters as the POP3

server.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Include attachments: select this option to

receive attachments with e-mails.

SMTP user ID: enter the SMTP user name.

SMTP password: enter the SMTP password.

Email retrieval limit(1-100): set the number

of headers you will retrieve from the server.

APOP login: connect to the server by using the

APOP login scheme.

Secure connection: use a secured connection

Secure connection: use a secure connection for

the e-mail service.

for e-mail service.

•

Email profile: select a connection profile to be

When the protocol type is IMAP4

used for e-mail services. You can also create or

edit a profile.

ꢀp. 93

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter the IMAP4 user name.

Password: enter the IMAP4 password.

Push messages (Menu 5.5.4)

You can change the settings for receiving push

messages from the wireless web server.

•

Receive: set how your phone receives push

messages. If you select Black list, the phone will

not accept messages from the specified addresses

on the Black list.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Menu functions

•

Black list: manage blocked server addresses.

My files (Menu 6)

The My files menu allows you to access images,

videos, music files, and sound clips stored in the

phone’s memory.

Broadcast messages (Menu 5.5.5)

You can change the settings for receiving broadcast

messages.

To access this menu, press <Menu> in Idle mode and

•

Receive: select to receive broadcast messages, or

not.

select My files

•

Channel list: indicate the channels from which

you wish to receive broadcast messages. Please

contact your service provider for further details.

Tips for Digital Rights Management

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a licence

key to access them.

•

Language: select the preferred languages in

which broadcast messages display.

You can acquire the key from the website which owns

the rights to the content; use the Activate key

option.

Memory status (Menu 5.6)

Use this menu to view the amount of memory

currently in use in each message folder.

Note the following icons on the list:

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

Your service provider supports only count-based or

unlimited-access DRM files.

4. Press <Stop> to stop the slide show.

Using image options

Images (Menu 6.1)

While viewing an image, press <Options> to access

the following options:

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from a computer.

•

Full screen view: view the image on the full

screen.

•

List: return to the image list.

Viewing an image

1. Select an image folder.

2. Select an image.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the image as wallpaper for the display

or as a caller ID image for a Phonebook entry.

You can view the enlarged image by pressing

[Volume up]. To zoom in or out, press [Volume].

Press the Navigation keys to scroll through the

image.

Edit: edit the image using the Image editor if it is

a photo taken by the camera on the phone.

ꢀp. 42

•

Activate key: get a new licence key when the key

for the selected DRM file expires.

Viewing a slide show

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

•

Delete: delete the file.

Rename: change the file name.

1. Select My photos

2. Press <Options> and select Slide show

3. Select an interval option. The slide show begins.

Move to Favourite images/Move to Photos:

move the file to another folder.

Menu functions

•

Bluetooth visibility: share the file or all files with

other Bluetooth devices.

During playback, use the following keys:

Key

Function

•

Protection: protect the file from being deleted.

Pauses or resumes playback.

Print via Bluetooth: print the image via a

Bluetooth-compatible printer. Some printers may

not be compatible with the phone.

Left

Returns to the previous file. Moves

backward in a file when held down.

•

Details: access the file properties.

Right

Skips to the next file. Moves forward

in a file when held down.

Key management: manage the licence keys you

have acquired.

Opens the video list.

Adjusts the volume.

Stops playback.

Videos (Menu 6.2)

Volume

Down

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

a computer.

Using video options

Video clips recorded on other devices, such as

camcorders, may not play correctly.

After playback, press <Options> to access the

following options:

Playing a video clip

1. Select a video folder.

2. Select a video clip.

•

Full screen: play the video clip on the full screen.

List: return to the video list.

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

Music (Menu 6.3)

This menu displays music files you have downloaded

or imported from a computer.

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the display or caller image.

Select a file. The music player opens.

ꢀp. 39

Activate key: get a new licence key when the key

for the selected DRM file expires.

When you play a file from this menu, without first

adding it to the play list in the music player,

background play is not supported.

•

Delete: delete the file.

Rename: change the file name.

Sounds (Menu 6.4)

Move to Favourite videos/Move to Video clips:

move the file to another video folder.

This menu displays voice memos you have recorded,

and sound clips you have downloaded, received in

messages, or imported from a computer.

•

Bluetooth visibility: share the file or the files you

want with other Bluetooth devices.

•

Protection: protect the file from being deleted.

Playing a sound clip

1. Select a sound folder.

Details: access the file properties.

Key management: manage the licence keys you

have acquired.

2. Select a sound clip. For a voice memo, see Voice

recorder.ꢀp. 41

Menu functions

•

Details: access the file properties.

Using sound options

Key management: manage the licence keys you

have acquired.

While playing a sound clip, press <Options> to

access the following options:

•

List: return to the sound list.

Other files (Menu 6.5)

Send via: send the file via MMS, e-mail, or

Bluetooth.

Use this menu to view, without corruption, various

document files and files stored in the phone’s memory.

Available file formats are DOC, XLS, PPT, PDF, and TXT.

•

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Viewing a document

Activate key: get a new licence key when the key

for the selected DRM file expires.

Select a document. Picsel File Viewer runs to open the

document.

•

Delete: delete the file.

• Depending on the file size or memory capacity of

Picsel File Viewer, some files may not open

properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content of

the document will not display correctly.

Rename: change the file name.

Move to Favourite sounds/Move to

Downloaded sounds: move the file to another

sound folder.

•

Bluetooth visibility: share the file or the files you

want with other Bluetooth devices.

Protection: protect the file from being deleted.

Use the following keys to view the document:

Using document options

While viewing a document, press <Options> or

Key

Function

> to access the following options:

Up/Down

/Left/Right

Pans around the page.

•

Full screen view/Normal view: change the view

mode.

Fits the document to the page

size.

•

Zoom: zoom in or out.

Fit to: fit the document to the page size, screen

width, or screen height.

/Volume up

Zooms in.

•

Go to: move to another page of the document.

Returns to the first page.

Rotate: rotate the document.

/Volume down Zooms out.

Returns to the previous page.

Screen panning

panning mode to by screen or by preset pixel.

Show controller Hide controller: show or hide

/Normal panning: change the

•

Rotates the document.

Moves to the next page.

Moves to the last page.

the shortcut tool bar of the Picsel file viewer.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Delete: delete the selected file.

Changes the display to Full

screen view or Normal screen

view.

Rename: change the file name.

Menu functions

•

Bluetooth visibility: share the file or the files you

want with other Bluetooth devices.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

•

Protection: protect the file from being deleted.

Details: access the file properties.

To access this menu, press <Menu> in Idle mode and

Shortcuts: view the functions of the keys you can

use in Picsel File Viewer.

select Calendar

Selecting a day on the calendar

Memory status (Menu 6.6)

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

gray box.

Use this menu to view memory information for media

items in the phone’s memory. Press [Left] or [Right] to

view the memory status by size or number of items.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [Volume] to move by month.

You can also access a media box by selecting it from

this menu.

Creating an item

You can store appointments, anniversaries, memos,

and tasks on the calendar. More than one item per day

can be stored.

•

Alarm tone: select an alarm tone.

Repeat: set the appointment to recur and

select a repeat option.

Until: set the ending date, if the appointment

will recur.

Entering an appointment

1. Select a date on the calendar.

2. Press <Options> and select Create

→

•

Appointment

3. Enter information or change the settings:

4. Press <Save> to save the appointment.

•

Subject: enter a title for the appointment.

Details: enter the appointment details.

Start date and Start time: enter the starting

date and time for the appointment.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the appointment.

AM/PM: select AM or PM in 12-hour time

format.

Entering an anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

Anniversary

3. Enter information or change the settings:

→

•

Occasion: enter information about the

anniversary.

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Before: set how long before the anniversary

the alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

•

Location: enter information about the

appointment location.

•

Alarm: set an alarm for the appointment.

Before: set how long before the appointment

the alarm is to alert you.

Menu functions

•

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

Consulting the calendar

Once you have created items, the item icons and the

number of items for a specific day appears at the

bottom of the calendar.

•

Appointment

Task

•

Anniversary

Memo

4. Press <Save> to save the anniversary.

Entering a memo

1. Select a date on the calendar.

Viewing an item

1. Select a date on the calendar to display the items

for the day.

2. Press <Options> and select Create

→

Memo.

3. Enter a memo and press <Save>.

2. Select an item to view its details.

Entering a task

1. Select a date on the calendar.

3. Press [Left] or [Right] to access the other items

scheduled for the selected day.

2. Press <Options> and select Create

→

Task

While viewing an item, press <Options> to access

3. Enter information or change the settings:

the following options:

•

Task: enter information about the task.

Start date: enter the starting date.

Due date: enter the ending date.

Select priority: select a priority level.

•

Edit: edit the item.

Create: add a new item.

Send via: send the item via SMS, MMS, e-mail, or

Bluetooth.

4. Press <Save> to save the task.

•

View by: change the view mode of the calendar.

•

Delete: delete the item.

Viewing items in a different mode

Memory status: access memory information for

the items stored on the calendar.

You can change the calendar display to Day view or

Week view. Press <Options> and select View by

→

a view mode.

Using calendar options

Day view

On the calendar, press <Options> to access the

You can view items for the selected date. Select an

item to view its details.

following options:

•

View by: change the view mode of the calendar.

Create: add a new item.

The following icons may display to indicate the item

status:

Go to: select today’s date or enter a specific date.

Event list: sort items by type of item.

•

Alarm set

Recurring item

Delete: delete the items stored on the calendar by

using various deleting options.

Task priority (Red: high, Blue: normal,

Grey: low)

You can delete recurring items in Day view only.

•

Completed task

•

Missed alarm events: view items whose alarms

you have missed.

Week view

You can view items for the selected week. A cell on the

timetable indicates the presence of a schedule item.

Select a cell in the day you want.

Memory status: access memory information for

the items stored on the calendar.

Menu functions

2. Make any desired adjustments.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 78

ꢀ

•

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [Camera].

ꢀ

3. Press [ ] or [Camera] to take a photo. The photo

• Do not take photos of people without their

permission.

is saved in the My photos folder.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

4. To

access photo options

Press

Options>.

ꢀp. 78

delete the photo

[C] and then <Yes>.

return to Capture mode

<Preview>.

Taking a photo

You can take photos in various modes. The camera

produces JPEG photos.

Using camera options in Capture mode

In Capture mode, press < > to access the following

options:

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

•

Record video: switch to Record mode.

Taking a photo

1. Access the Camera menu or press and hold

Shooting mode: take a photo in the following

modes:

[Camera] to turn on the camera.

Single shot: take a photo in Normal mode. You

can select whether or not the camera automatically

saves a photo.

Scene programs: set whether or not to use Night

shot mode.

Shutter sound: select the sound that you hear

when you press the shutter release key, [ ] or

[Camera].

Multi-shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

Zoom sound: turn the sound effect for zooming

Mosaic shot: take several stills and save them in

on or off.

one frame. You can select the layout.

Brightness sound: turn the sound effect for

•

Effects: change the colour tone or apply a special

effect.

brightness adjustment on or off.

White balance: adjust the colour balance of the

image. You can make your photo appear warmer

or cooler.

•

Frames: apply a decorative frame.

Timer: set a time delay before the camera takes a

photo.

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

select a higher ISO number. The higher the ISO

number, the faster the camera shutter functions

and the more sensitive the camera is to light.

Higher ISO settings may bring some distortion to

an image.

•

Go to My photos: access the My photos folder.

Settings: change the default settings for taking a

photo.

Size: select an image size.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

•

Camera shortcuts: view the functions of the keys

you can use in Capture mode.

Menu functions

Using the keypad in Capture mode

Key

Function

You can use the keypad to customise your camera

settings in Capture mode.

Sets the timer.

Changes the ISO setting.

Switch to Night shot mode.

Goes to the My photos folder.

Changes the preview screen.

Key

Function

Left/Right

Up/Down

Volume up

Adjusts the image brightness.

Zooms in or out.

Flips the image vertically.

Using photo options

Volume down Shows the mirror image.

After saving a photo, press <Options> to access the

following options:

Switches to Record mode.

ꢀp. 79

Changes the image size.

•

View: access one of the multi-shot photos.

Changes the image quality.

Changes the shooting mode.

Viewfinder: returns to Capture mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Changes the colour tone or applies a

special effect.

•

Set as: set the photo as wallpaper for the display

or as a caller ID image for a Phonebook entry.

Changes the white balance.

Selects a decorative frame.

Edit: edit the photo by using various tools.

ꢀp. 42

•

Delete: delete the file.

3. Press [ ] or [Camera] to start recording.

Rename: change the file name.

Go to My photos: access the My photos folder.

4. Press [ ], < >, or [Camera] to stop recording.

The video is automatically saved in the My video

clips folder.

ꢀp. 67

•

Protection: protect the file from being deleted.

5. To

play back the video clip

Press

Print via Bluetooth: print the photo via a

Bluetooth-compatible printer. Some printers may

not be compatible with the phone.

[

access video options

delete the video clip

return to Record mode

<Options>.ꢀp. 81

•

Details: access the file properties.

[C] and then <Yes>.

<Preview>.

Recording a video

You can record a video of what is displayed on the

camera screen and save it.

Using camera options in Record mode

In Record mode, press < > to access the following

options:

Recording a video

1. In Capture mode, press [

1].

•

Take photo: switch to Capture mode.

2. Make any desired adjustments.

Effects: change the colour tone or apply a special

effect.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 80

ꢀ

•

Timer: set a time delay before the camera starts

recording.

ꢀ

Menu functions

•

Go to My video clips: access the My video clips

folder.

White balance: adjust the colour balance of the

image. You can make your video appear warmer or

cooler.

•

Settings: change the following settings for

recording a video:

•

Camcorder shortcuts: view the functions of the

keys you can use in Record mode.

Recording mode: select a video recording mode.

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode.

Select Limit for multimedia messages/

wallpaper to record a video suitable for

messaging or for setting as wallpaper or caller ID

image. The video clip is saved in 3GP format.

Key

Function

Left/Right

Up/Down

Volume up

Adjusts the image brightness.

Zooms in or out.

Size: select a frame size.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Record audio: record a video clip with audio.

Flips the image vertically.

Volume down Shows the mirror image.

Switches to Capture mode.

ꢀp. 76

Zoom sound: turn the sound effect for zooming

on or off.

Changes the frame size.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Changes the image quality.

•

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the display or the caller image.

Key

Function

Changes the video recording mode.

•

Delete: delete the file.

Changes the colour tone or applies a

special effect.

Rename: change the file name.

Go to My video clips: access the My video clips

folder.

ꢀp. 68

Changes the white balance.

Mutes or unmutes audio.

Sets the timer.

•

Protection: protect the file from being deleted.

Details: access the file properties.

Goes to the My video clips folder.

Changes the preview screen.

Using video options

After saving a video clip, press <Options> to access

the following options:

•

Full screen: play the video clip on the full screen.

Record another: return to Record mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Menu functions

Phone settings (Menu 9.2)

Settings (Menu 9)

Many different features of your phone’s system can be

customised to suit your preferences.

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Some menus may not be available, depending on

your service provider.

To access this menu, press <Menu> in Idle mode and

Language (Menu 9.2.1)

select Settings

Use this menu to select a language for the display

text. If you select Automatic, the phone uses the

same language as the SIM card.

Time and date (Menu 9.1)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World clock menu.

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

ꢀp. 44

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Shortcuts (Menu 9.2.3)

•

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

•

Calendar starting day: set which day of the

week the calendar starts with.

Assigning a shortcut menu

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

•

Auto update: select to receive time information

from your network.

Using shortcut options

•

Anykey answer: answer an incoming call by

pressing any key, except for <Reject> and [ ].

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Offline mode (Menu 9.2.7)

Remove: deactivate the shortcut assignment to

the selected key.

Use this menu to switch the phone to Offline mode or

back to Online mode.

•

Remove all: deactivate all shortcut assignments.

Display settings (Menu 9.3)

Auto keypad lock (Menu 9.2.4)

Use this menu to change settings for the display.

Use this menu to set the phone to lock the keypad

automatically when the display turns off.

Wallpaper (Menu 9.3.1)

You can set up the idle screen on the display.

Volume key (Menu 9.2.5)

•

Wallpaper image: select an image or a video clip

to be displayed on the display.

Use this menu to set whether the phone mutes the call

ringer or rejects a call if you press and hold [Volume]

when a call comes in.

•

Text position: select a text position. If you do not

want to display text in Idle mode, select Off

Extra settings (Menu 9.2.6)

•

Text mode: select a font style.

You can turn the automatic redialling or answering

feature on or off.

Text colour: select a font colour.

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in a message.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Menu functions

Skin (Menu 9.3.2)

Sound settings (Menu 9.4)

You can select a skin colour pattern for Menu mode.

Use this menu to customise various sound settings.

Brightness (Menu 9.3.3)

Incoming call (Menu 9.4.1)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to change the sound settings for

incoming calls.

•

Ringtone: select a ringtone to be used for the call

ringer.

Dialling display (Menu 9.3.4)

Use this menu to select a font type, a colour and size

for the numbers entered, and background colour of

the display while dialling.

•

Volume: select a ringtone volume.

Alert type: specify how you are to be informed of

incoming calls.

Show caller information (Menu 9.3.5)

Keypad tone (Menu 9.4.2)

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the key tone volume using [Volume]

in Idle mode.

TV-out settings (Menu 9.3.6)

Use this menu to select a video system for a TV.

Message tone (Menu 9.4.3)

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and broadcast messages individually.

•

Tone: select one of the several message tones.

•

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Alert type: specify how you are to be informed

when a message comes in.

Indicative tone: set the phone to beep when a

pop-up window displays.

•

Repetition: specify how often the phone informs

you of a new message.

Power on/off (Menu 9.4.4)

Light settings (Menu 9.5)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Use this menu to change settings for the light.

Backlight time (Menu 9.5.1)

Silent mode (Menu 9.4.5)

You can select the length of time the backlight or

display stays on.

Use this menu to set how the phone acts to alert you

to a specific event while in Silent mode.

•

Main display normal: select the length of time

the backlight stays on.

Extra tones (Menu 9.4.6)

•

Main display dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

Use this menu to customise additional tones for the

phone.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

Menu functions

•

Busy: divert calls when you are on another

call.

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

your service area or when your phone is

switched off.

Keypad light (Menu 9.5.2)

Use this menu to set how the phone controls the use

of the keypad light. Select one of the following options

in the Use at line.

•

Any time: the keypad light is always used.

Night time: the keypad light is used only between

5:00 PM and 9:00 AM.

•

Cancel all: cancel all call diverting options.

•

Custom time: you can specify the time period

that the keypad light is used.

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

Deactivate

Network services (Menu 9.6)

4. Move to the Divert to line.

Use this menu to access network services. Yo can

contact your service provider to check their availability

and subscribe to them, if you wish.

5. Enter the number to which calls are to be diverted.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

Call diverting (Menu 9.6.1)

This network service reroutes incoming calls to a

phone number that you specify.

7. Press <Select>.

1. Select a call diverting option:

•

Divert always: divert all calls.

4. Enter the call barring password supplied by your

Call barring (Menu 9.6.2)

service provider and press <Select>.

This network service allows you to restrict your calls.

1. Select a call barring option:

Call waiting (Menu 9.6.3)

•

All outgoing calls: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home service area.

All incoming calls: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home service area.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate. To deactivate call waiting, select

•

Deactivate

Network selection (Menu 9.6.4)

This network service allows you to manually select the

network to be used while roaming outside of your

home area, or to let the network be chosen

automatically.

•

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

Deactivate

Menu functions

Caller ID (Menu 9.6.5)

Closed user group (Menu 9.6.7)

This network service allows you to hide your phone

number from the person you are calling. If you select

Default, the phone will use the default setting

provided by the network.

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group (CUG), contact your

service provider.

Some networks may not allow you to change this

setting.

•

Index list: add, delete, or activate CUG index

numbers.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.6.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Voice server number: enter the voicemail server

number.

Setting up the Bluetooth feature

Bluetooth (Menu 9.7)

The Bluetooth menu provides the following options:

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

•

Activation: activate or deactivate the Bluetooth

feature.

My devices: search for connectable Bluetooth

devices.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

• If there are obstacles between the devices, the

operating distance may be reduced.

• It is recommended that you do not use the

Bluetooth feature while using multimedia

features, such as voice recorder, camera, and

music player, or vice versa, for better

performance.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Bluetooth services: display available Bluetooth

services.

• Some devices may not be compatible with your

phone.

Menu functions

4. Enter a Bluetooth PIN and press <OK>. This code

Searching for and pairing with a Bluetooth

device

is used just once and you do not need to memorise

it.

1. From the Bluetooth menu, select My devices

2. Select Search for new devices

When the owner of the other device enters the

same code, pairing is complete.

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as 0000

If the other device has a code, you must enter it.

•

Stereo headset

Mobile phone

Computer

•

PDA

Using device options

Unknown device

Printer

From the device list, press <Options> to access the

following options:

Mono headset/

Hands-free car kit

•

Connect: connect to a headset or hands-free car

kit.

The colour of the icon indicates the status of the

the device:

Disconnect: end the connection with the

connected device.

•

Grey for unpaired devices

Blue for paired devices

Orange for devices that are currently

connected to your phone

Browse files: search for data from the device and

import data directly to your phone.

Service list: access the Bluetooth service list of

the device.

3. Select a device.

Rename: rename the paired device.

•

Authorise device/Unauthorised device:

Receiving data via Bluetooth

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active and its visibility must be

enabled.

Delete: remove the selected device or all devices

from the list.

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Press <Yes> to receive data.

2. Select the application in which the item you want

to send is stored.

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

3. Scroll to the item you want and press <Options>.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

If you enter an incorrect PIN/PIN2 three times, the

SIM card is blocked. To unblock it, you need to enter

your PUK/PUK2 (Personal Unblocking Key). The

codes are supplied by your service provider.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Menu functions

PIN check (Menu 9.8.1)

Privacy (Menu 9.8.5)

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Use this menu to lock access to messages, media files,

or all menu functions on the phone, except for call

functions.

When a privacy option is enabled, you must enter the

phone password to access the locked items or

functions.

Change PIN code (Menu 9.8.2)

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

SIM lock (Menu 9.8.6)

This menu allows your phone to work only with the

current SIM by assigning a SIM lock code. You must

enter the SIM lock code to use a different SIM card.

Phone lock (Menu 9.8.3)

Use this menu to lock the phone from unauthorised

use.

Fixed dialling mode (Menu 9.8.7)

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.8.4)

Change PIN2 code (Menu 9.8.8)

Use this menu to change your phone password.

If supported by your SIM card, use this menu to

change your current PIN2.

•

Port: enter the port number of the proxy

server.

Linger time: set a time period after which the

network is disconnected if there has been no

new data traffic in that time.

DNS: activate or deactivate the DNS (Domain

Name Server) addresses.

DNS 1 and DNS 2: enter the primary and

secondary DNS addresses.

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Connection settings (Menu 9.9)

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

•

Your phone is set up by default for connecting to the

network. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

•

Creating a profile

1. Press <New>. If a profile has already been saved,

press <Options> and select Add new

When the bearer is set to GPRS

connection

APN: enter the access point name.

2. Specify profile parameters:

•

Profile name: enter a profile name.

Homepage URL: enter the URL address of the

page to be used as your homepage.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

Password: enter the login password.

When the bearer is set to GSM

Dial number: enter the PPP phone number.

•

Password: enter the login password.

Data call type: select a call type for data

transmission.

Solve problems

3. Press <Save> to save the profile.

Help and personal needs

To save the time and expense of an unnecessary

service call, perform the simple checks in this section

before contacting a service professional.

Using profile options

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

When you switch on your phone, the following

messages may appear:

Add new connection: add a new profile.

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

Reset settings (Menu 9.10)

“Enter password”

Use this menu to reset the phone’s settings you have

changed.

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

1. Press [ ] to select the setting categories to be

reset.

“Enter PIN”

2. Press <Reset>.

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

change this password.ꢀp. 92

“Enter PUK”

The PIN has been entered incorrectly three times,

•

Be sure that you are accessing the correct cellular

network.

•

and the SIM card is now blocked. Enter the PUK

supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No service,” “Network failure,” or “Not done”

displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Warning

Low

You have entered a number but it was not dialled

battery” flashes on the display

•

Be sure that you have pressed [ ].

•

Your battery is insufficiently charged. Recharge the

battery.

The audio quality of the call is poor

Be sure that you have accessed the right cellular

network.

•

Be sure that you have not set an outgoing call

barring option.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Your correspondent cannot reach you

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

Health and safety information

•

Use the Contact list menu to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery does not charge properly or the

phone sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to solve

the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is

2.0W/kg.^*

The highest SAR value for this model phone was

0.639W/kg.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

Health and safety information

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

•

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

•

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Health and safety information

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

100

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

101

Health and safety information

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

102

Index

Configuration messages • 55

Connection tone • 85

Converter • 46

Creating messages

e-mail • 54

MMS • 52

SMS • 51

CUG (Closed User Group) • 88

Diverting, calls • 86

Document files • 70

DRM (Digital Rights

Management) • 66

DTMF tones, send • 30

AB mode, text input • 25

Alarm • 45

Answering

Calculator • 46

Calendar • 72

Call cost • 33

Call log

call • 28

second call • 29

Anykey answer • 83

Auto redial • 83

dialled • 32

missed • 32

received • 32

Call time • 32

Caller groups • 35

Caller ID • 84

Calls

E-mails

creating/sending • 54

deleting • 59

setting • 63

viewing • 58

Emergency calls • 100

Date, set • 82

Deleting

call log • 31

Background image • 83

Backlight, set

display • 85

answering • 28

barring • 87

diverting • 86

holding • 29

redialling • 28

rejecting • 28

transferring • 31

waiting • 87

e-mail • 58

events • 75

MMS • 56 58

phonebook • 34

SMS • 56 58 60

Dialled calls • 32

59, 60

keypad • 86

Barring, calls • 87

Battery

FDN (Fixed Dialling Number)

mode • 92

charging • 7

File manager • 66

File viewer • 70

low indicator • 8

precautions • 97

Bluetooth

Dialling font, set • 84

Display

receiving, data • 91

sending, data • 91

settings • 89

Games • 44

Camera

brightness • 84

Greeting message • 82

photos • 76

videos • 79

icons • 10 11

language • 82

layout • 10

settings • 83

Broadcast messages • 57

Browser, web • 48

CB (Cell Broadcast) messages •

Characters, enter • 25

Health and safety • 96

Holding, call • 29

103

Index

Phonebook

adding • 34

Icons, description • 10

Memory status

Name card • 36

Names

deleting • 34

finding • 33

managing • 37

options • 34

speed dialling • 36

Image editor • 42

downloaded items • 72

Images, downloaded • 67

Inbox, messages

e-mail • 58

file manager • 72

messages • 66

phonebook 37

entering • 25

searching • 33

Network band, select • 89

Network selection • 87

Network services • 86

Numbers

MMS/SMS • 55

Message tone • 84

Messages

cell broadcast • 57

configuration • 56

e-mail • 54 58

greeting • 82

Photos

International calls • 27

Internet • 48

editing • 42

taking • 76

viewing • 67

searching • 33

storing • 34

Java applications • 44

PIN, change • 92

PIN2, change • 92

Power on/off tone • 85

Privacy • 92

Problems, solve • 94

Push messages • 57 65

MMS • 52

push • 57

SMS • 51

Offline mode • 9

Key tones

Outbox, messages • 57

selecting • 84

sending/muting • 30

Minute minder • 85

Missed calls • 32

MMS messages

Password

call barring • 87

phone • 92

Phone

Language, select • 82

Last number, redial • 28

Light settings • 85

Locking

creating/sending • 52

deleting • 56

setting • 62

Received calls • 32

Received messages

e-mail • 58

care and maintenance •

101

display • 10

icons • 10

locking • 92

password • 92

resetting • 94

switching on/off • 8

unpacking • 6

viewing • 55

MMS/SMS • 55

Recording

videos • 79

voice memos • 41

Redialling

keys • 8

menu functions • 92

phone • 92

Multiparty-call • 31

Music player • 38

Music, downloaded • 69

My files • 66

SIM card • 92

Low battery indicator • 8

automatically • 83

manually • 28

104

Resetting phone • 94

Ringer

incoming calls • 84

messages • 85

Road safety • 98

Roaming • 87

Speed dial • 36

Stopwatch • 47

Switching on/off

Web browser

access • 48

bookmarks • 49

World time • 44

microphone • 30

phone • 8

T9 mode, text input • 26

Templates, message • 60

Text, enter • 25

Time, set • 82

Timer • 47

Safety

information • 96

precautions • 1

Security, calls • 91

Sent messages • 58

Shortcut • 82

Silent mode

entering • 14

setting • 85

SIM card

inserting • 7

locking • 92

Skin colour • 84

SMS messages

creating/sending • 51

deleting • 56

TV out

setting • 84

viewing on TV screen •

Videos

playing • 68

recording • 79

Voice recorder

playing • 41

recording • 41

Voicemail server • 88

setting • 61

viewing • 55

Sound settings • 84

Sounds, downloaded • 69

Speakerphone • 30

Waiting call • 87

Wallpaper • 83

105

Sprint Nextel SprintVision Katana 2 User Manual
Sony ICF C05iP User Manual
Seagate ST3146755SS User Manual
Samsung SGH ZV60 User Manual
Samsung SGH A226R User Manual
Samsung SF 3100 User Manual
Samsung R100 User Manual
Samsung Cell Phone 4G LTE SMARTPHONE User Manual
Nokia V104 User Manual
Nokia CARBON ARTE 8800 User Manual