* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear
different from the illustrations in this guide.
Printed in Korea
Code No.:GH68-07742A
English. 09/2005. Rev 1.0
World Wide Web
Drive safely at all times
Do not use a hand-held phone while driving. Park
the vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Important
safety
Switch off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
precautions
Switch off the phone near all medical
equipment
Failure to comply with the following
precautions may be dangerous or illegal.
Hospitals or health care facilities may be using
equipment that could be sensitive to external radio
frequency energy. Follow any regulations or rules in
force.
Interference
Keep your phone away from small children
All wireless phones may be subject to interference,
which could affect their performance.
Keep the phone and all its parts, including accessories,
out of the reach of small children.
Be aware of special regulations
Accessories and batteries
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden
to use it, or when it may cause interference or danger.
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories could
damage your phone and may be dangerous.
• The phone could explode if the battery is
replaced with an incorrect type.
• Dispose of used batteries according to the
manufacturer’s instructions.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone
is switched on.
Qualified service
Only qualified service personnel may repair your
phone.
Emergency calls
For more detailed safety information, see "Health and
safety information" on page 61.
Key in the emergency number for your present
location, then press
.
1
About this Guide
•
Tri-band operation
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
Use your phone in worldwide GSM networks, in
any of 900, 1800, and 1900 bands.
In this guide, the following instruction icons appear:
Special
features of your phone
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
•
Simple, compact design with Intenna
Indicates that you can get more information
on the referenced page.
ꢀ
Samsung’s powerful intenna technology allows
the best call quality without an annoying
external antenna.
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
→
•
IrDA
Send and receive Phonebook
entries via an infrared port.
Indicates a key on the phone. For example,
[
]
[
]
Indicates a soft key, whose function is
< >
displayed on the phone screen. For example,
<Menu>
2
•
Web browser
•
•
Calendar and to do list
Keep track of your daily and
monthly schedules and tasks.
Access the wireless web to get
up-to-the-minute information
and a wide variety of media
content.
Alarm
Use your phone as an alarm
clock to wake you up in the
morning or notify you to an
event.
•
•
Java
Enjoy Java™-based embedded
games and download new
games.
•
•
Calculator
Perform basic calculations and
do currency conversions.
Phonebook
Store home, office, or cellular
phone numbers for your entries.
•
Multimedia Message Service (MMS)
Send and receive MMS messages with a
combination of text, images, and sounds.
Voice recorder
Record memos or sounds.
3
Use Phonebook ...................................................... 16
Send messages...................................................... 16
View messages....................................................... 18
Contents
Unpack
6
6
7
Enter text
19
22
27
59
Make sure you have each item
Your phone
ABC, T9, Number, and Symbol mode
Call functions
Buttons, features, and locations
Get started
Advanced calling features
Menu functions
First steps to operating your phone
All menu options listed
Solve problems
Install and charge the phone..................................... 7
Power on or off........................................................ 8
Keys and display ..................................................... 9
Access menu functions ............................................ 11
Customise your phone............................................. 12
Make/Answer calls .................................................. 14
Help and personal needs
Health and safety information
61
69
Step outside the phone
14
Index
Begin with games, web, messages, and other special
features
Play games............................................................ 14
Browse the web...................................................... 15
4
Overview of menu functions
To access Menu mode, press <Menu> in Idle mode.
4 Sound settings
ꢀp. 32
1 SIM AT
2
ꢀ
p. 27
6 Funbox
ꢀ
p. 42
8 Phonebook
ꢀp. 51
1 Ring tone
2 Ring volume
3 Alert type
4 Keypad tone
5 Message tone
6 Alert on call
7 Folder tone
8 Power on/off
9 Extra tones
ꢀp. 32
ꢀp. 32
ꢀp. 32
ꢀp. 32
ꢀp. 32
ꢀp. 33
ꢀp. 33
ꢀp. 33
ꢀp. 33
1 WAP browser
2 Games
3 Sounds
4 Images
5 Delete all
6 Memory status
ꢀp. 42
ꢀp. 45
ꢀp. 45
ꢀp. 46
ꢀp. 46
ꢀp. 46
1 Search
ꢀp. 51
ꢀp. 52
ꢀp. 52
ꢀp. 52
ꢀp. 53
ꢀp. 53
ꢀp. 53
ꢀp. 54
2 New entry
3 Group search
4 Edit group
5 Speed dial
6 Delete all
7 Memory status
8 SDN*
2 Call records
ꢀp. 27
1 Missed calls
2 Received calls
3 Dialled calls
4 Delete all
ꢀp. 27
ꢀp. 28
ꢀp. 28
ꢀp. 28
ꢀp. 28
ꢀp. 28
7 Organiser
ꢀp. 46
5 Call time
6 Call cost*
1 Alarm
2 Calendar
3 Time & Date
4 Calculator
5 To do list
6 Voice memo
7 Currency exchange
ꢀp. 46
ꢀp. 47
ꢀp. 48
ꢀp. 48
ꢀp. 49
ꢀp. 50
ꢀp. 51
9 Phone settings
ꢀp. 54
5 Messages
ꢀp. 33
3 Network services
ꢀp. 29
1 Infrared activate
2 Display settings
3 Greeting message
4 Own number
5 Language
6 Security
7 Extra settings
8 Short cut
ꢀp. 54
ꢀp. 55
ꢀp. 56
ꢀp. 56
ꢀp. 57
ꢀp. 57
ꢀp. 58
ꢀp. 58
ꢀp. 59
1 Text messages
2 Multimedia
messages
ꢀp. 33
ꢀp. 38
1 Call diverting
2 Call barring
3 Call waiting
4 Network selection
5 Caller ID
6 Closed user group
7 Band selection
ꢀp. 29
ꢀp. 30
ꢀp. 30
ꢀp. 30
ꢀp. 31
ꢀp. 31
ꢀp. 31
3 Push messages
ꢀp. 42
9 Reset settings
*Shows only if supported by your
SIM card.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Earpiece
Display
Phone
Travel adapter
User’s guide
Navigation keys
(Up/Down/Left/
Right)
Web access/
Confirm key
Headset jack
Left soft key
Volume keys
Right soft key
Battery
Power on/off/
Menu exit key
You can obtain various accessories from your local
Samsung dealer.
Dial key
Cancel/Correct
key
Alphanumeric
keys
The items supplied with your phone and the accessories
at your Samsung dealer may vary, depending on your
country or service provider.
Special
function keys
Microphone
Infrared port
6
Get started
Install the battery.
Replace the cover.
First steps to operating your phone
SIM card information
When you subscribe to a cellular network, you receive
a plug-in SIM (Subscriber Identity Module) card
loaded with your subscription details, such as your
PIN, and available optional services.
Install and charge the phone
Plug the travel adapter
into the phone.
Plug the adapter into
a standard AC wall
outlet.
Remove the battery
cover.
Insert the SIM card.
If the phone is already
on, first turn it off by
Make sure that the
gold-coloured contacts
on the card face down
into the phone.
holding [
].
7
Get started
Power on or off
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Power on
1. Open the phone.
2. Press and hold [ ] to turn on
the phone.
Remove the adapter from the phone.
Do not turn on
the phone when
mobile phone
3. If necessary, enter the PIN and
use is prohibited.
press <OK>.
Power off
1. Open the phone.
Low battery indicator
2. Press and hold [ ].
When the battery is low:
•
•
•
a warning tone sounds,
the battery low message displays, and
the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
8
Keys and display
Keys
End a call.
Press and hold to switch the phone on or off.
In Menu mode, cancel input and return the
phone to Idle mode.
Perform the function indicated on the bottom
line of the display.
Enter numbers, letters, and some special
characters.
In Idle mode, access your favourite menus
directly.ꢀp. 58
In Idle mode, press and hold [1] to access
In Menu mode, scroll through menu options.
your voicemail server. Press and hold [
0] to
enter an international call prefix.
Enter special characters.
In Idle mode, launch the web browser.
In Menu mode, select the highlighted menu
option or confirm input.
In Idle mode, press and hold
or deactivate Silent mode. Press and hold
to enter a pause between numbers.
[
]
to activate
[
]
Make or answer a call.
In Idle mode, retrieve the recent numbers
dialled, missed, or received.
Adjust the phone volume.
In Idle mode, adjust the keypad tone
volume.
Delete characters from the display.
In Menu mode, return to the previous menu
level.
9
Get started
Display
Call diverting feature active
p. 29
Icons
(continued)
ꢀ
Layout
IrDA feature active
Silent mode or call ringer set to
vibrate p. 13, p. 32
Mute mode p. 25
ꢀp. 54
Icons
display various icons.
ꢀ
Text and graphics
display messages,
instructions, and
ꢀ
information you enter.
New text message
New voicemail message
New multimedia message
Alarm set
Soft key function
indicators
show the current functions
assigned to the two soft
keys.
Menu Phonebook
Battery power level
Received signal strength
Icons
Call in progress
Out of your service area; you
cannot send or receive calls
GPRS network
Roaming
10
Access menu functions
Select an
option
1. Press the appropriate soft key.
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
2. Press the Navigation keys to
move to the next or previous
option.
display indicates their current role.
3. Press <Select>, <OK>, or
Menu
Phonebook
[
]
to confirm the function
displayed or option highlighted.
4. To exit, choose either of the
following methods:
•
Press < > or [
up one level.
C] to move
•
Press [ ] to return to Idle
mode.
Press the left soft
key to access
Menu mode.
Press the right soft
Use shortcuts Press the number key
corresponding to the option you
want.
key to access the
Phonebook menu.
11
Get started
Customise your phone
You can set wallpaper for the idle
screen.
Idle mode
wallpaper
1. In Idle mode, press <Menu
and select Phone settings
Language
>
→
Display
language
1. In Idle mode, press <Menu
>
→
and select Phone settings
.
Display settings
→
2. Select a language.
Wallpaper Wallpaper list
→
.
2. Select the image you want.
1. In Idle mode, press <Menu
>
→
Call ringer
melody and
volume
and select Sound settings
3. Press <Select>.
Ring tone
.
2. Select a ringtone.
3. Select Ring volume
.
4. Adjust the volume level.
5. Press <OK>.
12
You can set the Navigation keys as
shortcuts to access your favourite
menus.
You can protect the phone against
unauthorised use with a phone
password. The phone will require
the password on power-up.
Phone lock
Menu
shortcuts
1. In Idle mode, press <Menu
>
and select Phone settings
→
1. In Idle mode, press <Menu
>
→
Short cut
.
and select Phone settings
Security
password
2. Enter the default password,
→
.
Change
2. Select a key.
3. Select a menu to be assign to
the key.
00000000, and press <OK>.
3. Enter a new 4- to 8-digit
You can switch the phone to Silent
mode to avoid disturbing other
people with your phone sounds.
Silent mode
password and press <OK>.
4. Enter the new password again
and press <OK>.
Press and hold [ ] in Idle mode.
5. Select Phone lock
6. Select Enable
7. Enter the password and press
OK>.
.
.
<
13
Make/Answer calls
Step outside the phone
Begin with games, web, messages, and other special
features
1. Enter an area code and phone
Make a call
number.
Play games
2. Press [ ].
3. To end the call, press [ ].
1. In Idle mode, press <Menu
>
Launch a game
and select Funbox
a game.
2. Select START GAME
→
Games
1. When the phone is ringing,
press [ ].
Answer a call
→
.
2. To end the call, press [ ].
3. Select a game mode or press
any key to start the game.
Press [ / ].
Adjust the
volume during
a call
14
Browse the web
1. Press the Navigation keys to
move the selection.
Play
BubbleSmile
Using a built-in web browser, you can get easy access
to the wireless web to get a variety of up-to-date
services and information and to enjoy downloads of
web content.
2. Press [1] or [3] to make a
horizontal or vertical line of
three identical bubbles.
In Idle mode, press [
].
Launch the
1. Press the Navigation keys to
move the selection to the
position you want to connect
the pipe.
web browser
Play Fun2Link
•
To scroll through browser items,
press [Up] or [Down].
Navigate the
web
2. Press [
] to insert a pipe.
3. Repeat until you complete the
pipeline.
•
•
To select an item, press [
].
To return to the previous page,
press [ ].
C
•
To access browser options,
press and hold [ ].
15
Step outside the phone
Use Phonebook
1. In Idle mode, press
Phonebook> and select
Search
Find an entry
<
To the phone’s memory:
Add an entry
.
1. In Idle mode, enter a phone
2. Select an entry.
number and press <Save>.
3. Scroll to a number and press
2. Select a number type.
[
<
] to dial, or press
Options> to access options.
3. Select Phone
.
4. Enter a name and press <OK>.
5. Press <OK> to save the entry.
To the SIM card:
Send messages
1. In Idle mode, press <Menu
and select Messages Text
messages Write new
2. Enter the message text.
3. Press <Options> and select
>
Send a text
message (SMS)
1. In Idle mode, enter a phone
→
number and press <Save>.
→
.
2. Select a number type.
3. Select SIM
.
Save and send or Send only
.
4. Enter a name and press <OK>.
4. If you selected Save and send
,
5. Press <OK> to save the entry.
select a memory location.
5. Enter a destination number and
press <OK>.
16
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Write new
>
7. Enter a destination number or
address, or select a number
from Phonebook and press
Send a
→
multimedia
message
(MMS)
→
.
<OK>.
2. Enter the message subject
8. To add other destinations,
select Add destination and
repeat from step 6.
press <OK>.
3. Select Add here and add
message contents.
9. To add destinations of other
types, press < > and repeat
from step 5.
4. When you have finished, press
Options> and select Send
5. Select a destination type.
6. Select one of Phone number
E-mail address, or
Phonebook
<
.
10.When you have finished, select
Send message
.
,
.
17
Step outside the phone
View messages
When a notification appears:
1. Press <View>.
View a
multimedia
message
When a notification appears:
View a text
message
2. Press <Options> and select
1. Press <View>.
Retrieve
.
2. Select the message from the
Inbox.
3. Select the message from the
Inbox.
From the Inbox:
From the Inbox:
1. In Idle mode, press <Menu
and select Messages Text
messages Inbox
2. Select a message.
>
1. In Idle mode, press <Menu
and select Messages
Multimedia messages
Inbox
2. Select a message.
>
→
→
→
.
→
.
18
•
•
: Number mode
Enter text
None: Symbol mode
ABC, T9, Number, and Symbol mode
Using ABC mode
Press the appropriate key until the character you want
appears on the screen.
You can enter text for some features such as
Messages, Phonebook, or Organiser, using ABC mode,
T9 mode, Number mode, and Symbol mode.
Characters in order displayed
Key
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text field.
Upper case
Lower case
Write new
Text input mode
Options
indicator
Press the right soft key to change the input mode:
space
(Creating an SMS message with uni-code encoding)
•
•
: ABC mode
: T9 mode
19
Enter text
Tips for using ABC mode
Using T9 mode
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the cursor
to move to the right automatically or press [Right].
Then, enter the next letter.
Entering a word in T9 mode
1. Press [
each key once for each letter.
For example, press [ ], [ ], [
enter Hello in T9 mode.
2] to [9] to start entering a word. Press
•
•
Press [ ] to insert a space.
Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case (
available.
4
3
5], [5], and [6] to
) are
T9 predicts the word that you are typing, and it
may change with each key that you press.
•
•
Press the Navigation keys to move the cursor.
Press [ ] to delete characters one by one. Press
and hold [ ] to clear the display.
C
2. Enter the whole word before editing or deleting
characters.
C
•
Depending on your country, you may be able to
access an input mode for your specific language by
holding [ ].
3. When the word displays correctly, go to step 4.
Otherwise, press [
choices for the keys that you have pressed.
For example, Of and Me use [ ] and [ ].
0] to display alternative word
6
3
4. Press [ ] to insert a space and enter the next
word.
20
Tips for using T9 mode
Using Number mode
Number mode enables you to enter numbers.
•
Press [1] to enter periods or apostrophes
automatically.
Press the keys corresponding to the digits you want.
•
Press [ ] to change case. Initial capital ( ),
Capital lock ( ), and Lower case (
available.
) are
Using Symbol mode
Symbol mode enables you to insert symbols.
•
•
Press [Left] or [Right] to move the cursor.
Press [ ] to delete characters one by one. Press
and hold [ ] to clear the display.
C
To
Press
C
display more symbols
select a symbol
[Up] or [Down].
Adding a new word to the T9 dictionary
This feature may not be available for some languages.
1. Enter the word that you want to add.
the corresponding
number key.
clear the symbol(s)
insert the symbol(s)
[
C
].
2. Press [0] to display alternative words for your key
presses. When there are no more alternative
words, Add displays on the bottom line.
<
OK>.
3. Press <Add>.
4. Enter the word you want using ABC mode and
press <OK>.
21
Redialling recent numbers
1. In Idle mode, press [ ] to display the list of
recent numbers.
Call functions
Advanced calling features
2. Scroll to the number you want and press [ ].
Making a call
1. In Idle mode, enter the area code and phone
number.
Making a call from Phonebook
Once you have stored a number in Phonebook, you
can dial the number by selecting it from
2. Press [ ].
Phonebook.ꢀp. 51
• Press [
C] to clear the last digit or press and hold
You can also use the speed dial feature to assign your
most frequently called numbers to specific number
[C] to clear the whole display. You can move the
cursor to edit an incorrect digit.
• Press and hold [ ] to enter a pause between
numbers.
keys.
Dialling a number from the phone’s memory
1. In Idle mode, press and hold [ ]. A + appears.
ꢀp. 53
0
Making an international call
1. In Idle mode, press and hold [
2. Enter the location number for the phone number
you want and press [ ].
0]. The
+
character
appears.
3. Press [Up] or [Down] to scroll through other
numbers.
2. Enter the country code, area code, and phone
number, then press [ ].
4. Press <Dial> or [ ] to dial the number you want.
22
Dialling a number from the SIM card
•
•
When Active folder is active, you can simply open
the phone. p. 58
Press <Reject> or [ ] to reject a call.
ꢀ
1. In Idle mode, enter the location number for the
phone number you want and press [ ].
2. Press [Up] or [Down] to scroll through other
numbers.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
3. Press <Dial> or [ ] to dial the number you want.
Ending a call
1. Press <View>.
Close the phone or press [ ].
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Answering a call
Using the headset
Use the headset to make or answer calls without
holding the phone.
When you receive an incoming call, the phone rings
and displays the incoming call image.
Press <Accept> or [ ] to answer the call.
Connect the headset to the jack on the left side of the
phone.
Tips for answering a call
•
When Anykey answer is active, you can press
any key to answer a call, except for <Reject> and
[
].ꢀp. 58
23
Call functions
The button on the headset works as listed below:
Making a second call
You can make another call if your network supports it.
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
To
Press
redial the last call
answer a call
end a call
the button twice.
and hold the button.
and hold the button.
4. Press <Options> and select End held call to end
the call on hold.
5. To end the current call, press [ ].
Options during a call
You can access a number of functions during a call.
Answering a second call
You can answer an incoming call, if your network
supports it and you have activated the call waiting
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a call.
feature.ꢀp. 30
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
1. Press [ ] to answer the call. The first call is
automatically put on hold.
2. Press <Swap> to switch between the calls.
Placing a call on hold/Retrieving
Press <Hold> or <Unhold> to place the call on hold
or retrieve the call.
3. Press <Options> and select End held call to end
the call on hold.
4. To end the current call, press [ ].
24
Using the Speakerphone feature
Muting or sending key tones
Use your phone as a speaker phone to talk and listen
with the phone a short distance away.
You can turn the key tones off or on.
Press <Options> and select Mute keys or Send
Press <Options> and select Speaker on
/
Normal
.
keys.
To communicate with answering machines or
computerised telephone systems, Send keys must
be selected.
Transferring a call
You can transfer the currently active call to a caller on
hold, if your network supports it. With this option, the
two callers can talk to each other, but you are
disconnected from the call.
Sending a sequence of DTMF tones
Dual tone multi-frequency (DTMF) tones are the tones
used in phones for tone dialling.
Press <Options> and select Transfer
.
You can send DTMF tones as a group after entering the
entire number you need to send or retrieving a
number from Phonebook. This feature is helpful for
entering a password or an account number when you
call an automated system, like a banking service.
Using the menu functions
Press <Options> and select Menu
.
Switching off the microphone
You can temporarily switch off your phone’s
microphone so that the other person on the phone
cannot hear you.
(Mute mode)
1. When connected with a teleservice system, press
<
Options> and select Send DTMF
2. Enter the number you need to send and press
OK>.
.
Press <Options> and select Mute or Unmute
.
<
25
Call functions
Having a private conversation with one
participant
Using Phonebook
You can access the Phonebook menu to locate or
1. Press <Options> and select Select one
2. Select a name or number from the participant list.
3. Select Private
.
store entries.ꢀp. 51
Press <Options> and select Phonebook
.
.
Making a multi-party call
Use this feature to allow as many as six people to join
a multi-party call, or conference call.
You can talk privately with that person, while the
other participants converse with each other.
4. To return to the multi-party call, press <Options
>
Your service provider must support multi-party calls
for you to use this feature.
and select Join
.
Disconnecting one participant
Setting up a multi-party call
1. Call the first participant.
1. Press <Options> and select Select one
.
2. Select a name or number from the participant list.
3. Select Remove
2. Call the second participant. The first call is
automatically put on hold.
.
The participant is dropped from the call, but the
call continues with the other parties.
3. Press <Options> and select Join. The first
participant is added to the multi-party call.
4. Press [ ] to end the multi-party call.
4. If desired, call another person or answer an
incoming call.
5. Press <Options> and select Join
.
6. Repeat steps 4 and 5 as desired.
26
Call records (Menu 2)
Use this menu to view the calls you have dialled,
received, or missed, the length of your calls, and the
cost of your calls.
Menu functions
All menu options listed
To access this menu, press <Menu> in Idle mode and
SIM AT (Menu 1)
select Call records
.
This menu is available if you use a SIM AT card that
provides additional services, such as news, weather,
sports, entertainment, and location services. Available
services may vary, depending on your service
provider’s plans.
Missed calls (Menu 2.1)
This menu displays the most recently received calls
that you did not answer.
Accessing a call record
1. Select a call record.
For details, see your SIM card instructions or contact
your service provider.
2. Press [Up] or [Down] to move to another call
record.
To access this menu, press <Menu> in Idle mode and
select SIM AT
.
3. Press [ ] to dial, or <Options> to access call
record options.
27
Menu functions
3. Press <Yes> twice to confirm the deletion.
Using call record options
While viewing call details, press <Options> to access
the following options:
Call time (Menu 2.5)
This menu displays the time log for calls made and
received. The actual time invoiced by your service
provider will vary.
•
Edit: change the number of the selected call
record.
•
Delete: delete the selected call record.
•
•
Last call time: check the length of your last call.
Received calls (Menu 2.2)
Total sent: check the total length of all the calls
you have dialled.
This menu displays the most recent calls you have
received.
•
•
Total received: check the total length of all the
calls you have received.
Dialled calls (Menu 2.3)
Reset timers: reset the call timers. You need to
enter the phone password.
This menu displays the most recent calls you have
dialled.
The password is preset to 00000000. You can
change this password.ꢀp. 57
Delete all (Menu 2.4)
Call cost (Menu 2.6)
Use this menu to delete all of the records in each call
type.
This network feature displays the cost of calls. This
menu is available only if your SIM card supports this
feature. Note that this is not intended to be used for
billing purposes.
1. Press [
] to select the call types to be cleared.
2. Press <Delete>.
28
•
•
Last call cost: check the cost of your last call.
Call diverting (Menu 3.1)
Total cost: check the total cost of all of your calls.
If the total cost exceeds the maximum cost set in
Set max cost, you must reset the counter before
you can make another call.
This network service reroutes incoming calls to a
phone number that you specify.
1. Select a call diverting option:
•
•
Divert always: divert all calls.
Busy: divert calls when you are on another
call.
•
Max cost: check the maximum cost limit set in
Set max cost
.
•
•
Reset counters: reset the cost counters.
•
•
No reply: divert calls when you do not answer
the phone.
Unreachable: divert calls when you are not in
an area covered by your service provider or
when your phone is switched off.
Cancel all: cancel all call diverting options.
Set max cost: set the maximum cost authorised
for your calls.
•
Price/Unit: set the price per unit that is applied
when the cost of your calls is calculated.
•
2. Select the type of calls to be diverted.
Network services (Menu 3)
Use this menu to access network services. Please
contact your service provider to check their availability
and subscribe to them, if you wish.
3. To activate call diverting, press <Activate>.
Otherwise, press <Options> and select Remove
.
4. Enter the number to which calls are to be diverted
and press <OK>.
To access this menu, press <Menu> in Idle mode and
select Network services
.
29
Menu functions
5. If you selected No reply, select the length of time
the network delays before diverting a call and
press <Select>.
2. Select the type of calls to be barred.
3. Press <Activate>. To deactivate call barring,
press <Deactivate>.
4. Enter the call barring password supplied by your
Call barring (Menu 3.2)
service provider and press <OK>.
This network service allows you to restrict your calls.
1. Select a call barring option:
Call waiting (Menu 3.3)
•
•
•
All outgoing: prohibit all outgoing calls.
International: prohibit international calls.
International except home: only allow calls
to numbers within the current country when
you are abroad, and to your home country.
All incoming: prohibit incoming calls.
Incoming while abroad: prohibit incoming
calls when you use your phone outside of your
home country.
Cancel all: cancel all call barring settings,
allowing calls to be sent and received normally.
Change barring password: change the call
barring password obtained from your service
provider.
This network service informs you when someone is
trying to reach you while you are on another call.
1. Select the type of calls to which the call waiting
option will apply.
2. Press <Activate>. To deactivate call waiting,
•
•
press <Deactivate>.
Network selection (Menu 3.4)
This network service allows you to either automatically
or manually select the network used when roaming
outside of your home area.
•
•
You can select a network other than your home
network only if there is a valid roaming agreement
between the two.
30
•
•
Automatic: connect to the first available network
when roaming.
•
•
•
Index list: list, add, or delete CUG index
numbers. Press <Options> to access the options
for setting up an index list.
Manual: select the network you want.
Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
Caller ID (Menu 3.5)
This network service allows you to prevent your phone
number from being displayed on the phone of the
person being called. However, some networks do not
allow the user to change this setting.
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from the
list.
•
•
•
Default: use the default setting provided by the
network.
Hide number: ensure your number does not
display on the other person’s phone.
Band selection (Menu 3.7)
For the phone to make and receive phone calls, it
must register with an available network. Your phone
can handle any of the following types of networks:
GSM 1900 and Combined GSM 900/1800.
Send number: send your number each time you
make a call.
Closed user group (Menu 3.6)
The country where you purchased your phone
determines the default band that it uses. When you
travel abroad, you must remember to change to an
appropriate band.
Use this menu to set incoming and outgoing calls to be
restricted to a selected user group. For details about
how to create a closed user group, contact your
service provider.
31
Menu functions
•
•
Vibration: the phone vibrates but not rings.
Sound settings (Menu 4)
Use this menu to customise various sound settings.
Vibra+melody: the phone vibrates three times
and then starts ringing.
To access this menu, press <Menu> in Idle mode and
select Sound settings
.
Keypad tone (Menu 4.4)
Use this menu to select the tone that the phone
sounds when you press a key.
Ring tone (Menu 4.1)
Use this menu to select a ringtone for the call ringer.
You can select one of the default ring melodies or
downloaded sounds.
You can adjust the keypad tone volume using [ / ]
in Idle mode.
Message tone (Menu 4.5)
Ring volume (Menu 4.2)
Use this menu to change the sound settings for
incoming SMS messages, MMS messages, and CB
messages individually.
Use this menu to adjust the ringtone volume.
Alert type (Menu 4.3)
•
•
•
SMS tone: specify how you are informed of new
SMS messages.
Use this menu to specify how you are to be informed
of incoming calls.
SMS-CB tone: specify how you are informed of
new cell broadcast (CB) messages.
•
Light only: the service light flashes; the phone
neither rings nor vibrates.
MMS tone: specify how you are informed of new
MMS messages.
•
Melody: the phone rings using the selected
ringtone.
32
•
Repetition: set how often the phone informs you
of new messages.
•
•
Minute minder: set the phone to beep every
minute during an outgoing call to keep you
informed of the length of your call.
Alert on call (Menu 4.6)
Connect tone: set the phone to beep when an
outgoing call is connected to the system.
Use this menu to select whether or not the phone
informs you when you receive a new message or when
the time for an alarm comes during a call.
Messages (Menu 5)
Folder tone (Menu 4.7)
Use the Messages menu to send and receive short
messages, and multimedia messages. You can also
use push message, voicemail, and cell broadcast
message features.
Use this menu to select the tone that the phone
sounds when you open or close the phone.
Power on/off (Menu 4.8)
To access this menu, press <Menu> in Idle mode and
Use this menu to select the melody that the phone
plays when it is switched on or off.
select Messages
.
Text messages (Menu 5.1)
Extra tones (Menu 4.9)
Short Message Service (SMS) allows you to send or
receive text messages including simple pictures,
melodies, and animated images.
Use this menu to customise additional tones for the
phone.
•
Error tone: set the phone to beep when you make
a mistake.
33
Menu functions
Inbox (Menu 5.1.1)
Outbox (Menu 5.1.2)
Use this menu to view received text messages.
Use this menu to view sent or saved text messages.
While viewing a message, press <Options> to access
the following options:
While viewing a message, press <Options> to access
the following options:
•
•
•
•
•
Delete: delete the message.
•
•
•
Delete: delete the message.
Send: forward the message to other people.
Text reply: reply to the sender.
Call back: call the sender.
Send: forward the message to other people.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
•
Move to phone: move the message from the SIM
card to the phone’s memory.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
Move to SIM: move the message from the
phone’s memory to the SIM card.
•
•
•
Move to phone: move the message from the SIM
card to the phone’s memory.
Select objects: save images or sounds from the
message into your phone.
Move to SIM: move the message from the
phone’s memory to the SIM card.
Select objects: save images or sounds from the
message into your phone.
34
4. If you select Save and send or Save only, select
Write new (Menu 5.1.3)
a memory location.
Use this menu to create and send text messages.
1. Enter your message.
5. Enter a destination number.
6. Press <OK> to send the message.
The maximum number of characters allowed in
a short message varies by service provider. If
your message exceeds the maximum number of
characters, the phone will split the message.
Templates (Menu 5.1.4)
Use this menu to create SMS templates with the
sentences you use frequently so that you can retrieve
and insert them when composing an SMS message.
2. Press <Options> to access the following options:
•
•
Text formatting: change the text attributes.
Add objects: add a sound, melody, picture, or
animated image to the message.
Add templates: retrieve a text template.
Add emoticon: retrieve an emoticon.
Add phonebook: add a Phonebook entry.
Add bookmark: add a web page’s address.
Language: change the language used in T9
input mode.
While viewing the templates list, press <Options> to
access the following options:
•
•
Edit: add or edit a template.
•
•
•
•
•
Send message: send the template as an SMS
message.
•
Delete: delete the template.
Emoticon templates (Menu 5.1.5)
Your phone provides preset emoticons so that you can
use when writing a message. Use this menu to create
or edit emoticons.
3. Press <Options> and select Send only
,
Save
and send or Save only
.
35
Menu functions
While viewing the emoticon list, press <Options> to
access the following options:
Setting name: change the name of the setting
group.
•
•
•
•
Add: add a new emoticon.
•
Common setting: the following options are
available:
Edit: edit the selected emoticon.
Send: send a message using the emoticon.
Delete: delete the emoticon.
Reply path: allow recipients to reply to you
through your SMS server.
Delivery reports: set the network to inform you
when your messages have been delivered.
Settings (Menu 5.1.6)
Use this menu to customise the SMS settings.
Bearer selection: select either GSM or GPRS
preferred, depending on your network.
The setting options available in this menu may vary
depending on your service provider.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM-alphabet to uni-code
if you enter a uni-code character. Use of uni-code
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides the automatic
character encoding by default.
•
Setting x (where
x
is the setting group number):
each group has its own submenu.
Service centre: store or changes the number of
your message centre.
Default destination: store a default destination
number.
Default type: set the default message type.
Default validity: set the length of time your
messages are stored in the SMS server.
36
•
•
Connect to voice server: connect to the voice
server to allow you to listen to your messages. You
can also connect to the voicemail server by
Delete all (Menu 5.1.7)
Use this menu to delete all of SMS messages in each
message box.
pressing and holding [1] in Idle mode.
1. Press [
cleared.
] to select the message boxes to be
Voice server number: change the voicemail
server number.
2. Press <Delete>.
Broadcast (Menu 5.1.0)
3. Press <Yes> twice to confirm the deletion.
The Cell Broadcast service delivers short messages on
various topics such as the weather or traffic.
Memory status (Menu 5.1.8)
Use this menu to check the number of SMS messages
you have stored and total number of SMS messages
you can store in each memory type.
Use this menu to change the settings for the service
and access broadcast messages.
•
Read: open received messages.
Voice mail (Menu 5.1.9)
The Volatile box saves network messages until
the phone is switched off.
Use this menu to store the number of the voicemail
server and access your voicemails.
The Archive box saves network messages
indefinitely. Press <Options> and select Save
when a text notification appears. The message is
saved in the Archive box.
You must enter the voice server number before you
can access your voicemails. Your service provider
can give the voice server number.
•
Receive: select to receive broadcast messages, or
not.
37
Menu functions
•
Channel list: specify the channels from which you
receive broadcast messages.
•
•
Read
Unread
•
Language: select the preferred languages in
which broadcast messages display.
While viewing a message, press <Options> to access
the following message options:
Please contact your service provider for details.
•
•
•
•
Delete: delete the message.
Reply: reply to the sender.
Callback: call the sender.
Multimedia messages (Menu 5.2)
Multimedia Message Service (MMS) delivers messages
containing a combination of text, picture, and sound,
from phone to phone or from phone to e-mail.
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
Forward: forward the message to other people.
Inbox (Menu 5.2.1)
Save picture: save an image from the message
into the Images folder.
This menu displays MMS messages that you have
received. The following icons tell you the message
status:
•
•
Save sound: save a sound from the message into
the Sounds folder.
•
•
•
•
•
Read notification
Properties: access the message properties.
Unread notification
Retrieving from the server
Processing your request
Failed to retrieve
When you select a notification, you can access
Retrieve to retrieve the message from the MMS
server.
38
Outbox (Menu 5.2.2)
Draft (Menu 5.2.3)
This menu displays MMS messages that you have
sent. The following icons tell you the message status:
After creating a multimedia message, you can store it
in this message box for sending later.
•
•
•
•
Being sent
Sent
You can view a message and use the options the same
as in Outbox
.
Failed to send
To be sent
Write new (Menu 5.2.4)
You can create and send an MMS message.
1. Enter the message subject and press <OK>.
While viewing a message, press <Options> to access
the following options:
2. Press <Options> and add message contents using
•
•
Delete: delete the message.
one of the following options:
Cut address: extract URLs, e-mail addresses, or
phone numbers from the message.
•
•
•
•
Add text: add message text.
Add picture: add a picture to the message.
Add sound: add a sound clip to the message.
Save: save the message in the Draft or
Templates box.
•
•
•
Send: send or resend the message.
Edit message: edit the message.
Properties: access the message properties.
•
•
Settings: change the message settings.
Add destination: enter destination numbers
or addresses.
39
Menu functions
•
Preview: view the message you created.
7. Enter a phone number or an e-mail address, or
select a number from Phonebook and press <OK>.
The maximum size allowed for a message can
differ, depending on your service provider.
8. To add more destinations, select Add destination
and repeat from step 6.
3. If you want to change the added items, highlight
one and press <Options> to access the following
options:
9. To enter additional numbers or addresses to other
destination types, press < >and repeat from step
5.
•
Edit text
text, picture, or sound.
/Edit picture/Edit sound: edit the
10.When you have finished, select Send message
.
Templates (Menu 5.2.5)
•
Add page: add pages. Move to each page by
pressing [Left] or [Right] on the message
screen.
Delete: delete the item from your message.
Duration: set how long one page displays.
After the specified time, the display
automatically scrolls to the next page.
Use this menu to store MMS messages you saved as
templates so that you can use them to create new
messages.
•
•
While viewing a message template, press <OK> to
access the following options:
•
•
Edit message: send the message using the
template.
4. When you have finished, select Send from the
options.
Delete: delete the template.
5. Select a destination type (To, Cc, Bcc).
6. Select one of Phone number
,
E-mail address, or
Phonebook
.
40
•
•
•
•
Message acceptance: select the category of
messages you want to receive.
Delete all (Menu 5.2.6)
Use this menu to delete all of MMS messages in each
message box.
Hide ID: hide your phone number on the
recipient’s phone.
1. Press [
cleared.
] to select the message boxes to be
Expiry date: set the length of time your messages
are stored in the message centre.
2. Press <Delete>.
Delivery time: set the time delay before
messages are sent.
3. Press <Yes> twice to confirm the deletion.
Memory status (Menu 5.2.7)
•
•
Priority: set the priority level of your messages.
Use this menu to view the amount of memory
available for MMS messages and memory currently in
use in each message box.
Report allowed: set the network to inform the
sender when a message has been delivered to you.
•
Page duration: set how long one page in your
outgoing messages displays. After a specified time,
the display automatically scrolls to the next page.
Setup (Menu 5.2.8)
Use this menu to customise the MMS settings.
•
•
•
Delivery report: set the network to inform you
when your messages have been delivered.
MMS profile (Menu 5.2.9)
You can configure required network settings for MMS.
The last profile accessed is automatically activated for
sending or receiving subsequent messages.
Read reply: send a read-reply request along with
your messages.
Auto download: set whether or not your phone
retrieves new incoming messages from the MMS
server without notifications.
Check with your service provider before you change
any MMS settings on your phone.
41
Menu functions
•
Profile name: assign a name to the MMS profile.
Funbox (Menu 6)
The Funbox menu allows you to use the web browser,
play Java games, and access images and sounds
stored in the phone’s memory.
•
Connection URL: enter the address of your MMS
server.
•
•
•
•
•
Security: select a data transmission mode.
IP address: enter the gateway address.
User name: enter the user ID.
To access this menu, press <Menu> in Idle mode and
select Funbox
.
Password: enter the password.
WAP browser (Menu 6.1)
APN: enter the access point name used for the
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-date
information and a wide variety of media content, such
as games, wallpapers, and ringtones.
address of the MMS server.
Push messages (Menu 5.3)
Use this menu to access messages from the web
server.
Home (Menu 6.1.1)
•
•
Inbox: view push messages you have received.
Receive: determine whether or not your phone
receives push messages.
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider. You can also press [
] in Idle mode.
Never: the phone rejects push messages.
Always: the phone receives all push messages.
Delete all: delete all push messages.
•
42
Navigating the web browser
To
•
•
Clear cache: delete information stored in the
cache.
Press
Inbox: read messages received from a web
server.
scroll through browser items
select a browser item
return to the previous page
[Up] or [Down].
Exiting the web browser
[
].
Press [ ] to exit the browser.
[C].
Favorite (Menu 6.1.2)
Using page options
Use this menu to save URL addresses in order to
quickly access web pages.
From any web page, press and hold [ ] to access the
following options:
Adding a bookmark
•
Reload: reload the current page with updated
information.
1. Select an empty location.
2. Enter a URL address and press <Enter>.
3. Enter a title for the bookmark and press <Enter>.
Accessing a bookmarked page
•
•
•
Home: return to the homepage.
Go to URL: enter a URL address manually.
Show URL: view the URL address of the current
web page.
Selecting a bookmark item launches the web browser
and accesses the associated web page.
•
Edit home: change the page to be used for your
homepage.
43
Menu functions
•
Bearer: select a bearer for each type of network
address accessed; GPRS or Data
When the bearer is set to GPRS
Using bookmark options
.
After saving an item, press <Options> to access the
following options:
:
•
•
Go to URL: access the bookmarked web page.
•
•
•
•
IP address: enter the web gateway address.
User name: enter the user ID.
Edit: edit the URL address and title of the
bookmark.
Password: enter the password.
•
Delete: delete the bookmark.
APN: enter the access point name of the GPRS
network gateway.
http:// (Menu 6.1.3)
When the bearer is set to Data
:
Use this menu to manually enter a URL address and
access the associated web page.
•
•
•
•
IP address: enter the web gateway address.
Login name: enter the user ID.
Settings (Menu 6.1.4)
Password: enter the password.
Use this menu to set up servers for the web browser.
Contact your service provider for details about your
settings options.
Dial-up number: enter the PPP server phone
number.
•
Data call type: select a data call type.
For each server, the following options are available:
•
•
Profile name: assign a name to the server profile.
Clear cache (Menu 6.1.5)
Homepage URL: set the address of your
homepage.
Use this menu to clear the cache, which is the
temporary memory that stores the web pages you
have recently accessed.
•
Security: select a data transmission mode.
44
Viewing game information
Games (Menu 6.2)
Scroll to the game you want and press <Info>.
You can download Java applications from various
sources using the web browser, and store them in your
phone.
Changing the DNS settings
You may need to change the DNS setting of the Java
server at your service provider’s instructions.
Java services may not available, depending on your
service provider.
1. Select Setting on the Games list.
Launching a game
1. Select the game you want on the Games list.
2. Enter the primary DNS address and press <OK>.
3. Enter the secondary DNS address and press
<
OK>.
2. On the startup screen of the game, you can access
the following options:
Sounds (Menu 6.3)
•
•
START GAME: start a new game.
CONTINUE: continue the last game you
played.
This menu displays sounds downloaded from the
wireless web or received in messages.
•
•
•
HIGH SCORE: view the high score table. This
option may not be available for some games.
HOW TO PLAY: view how to play the game
and the key functions for the game.
OPTION: switch on or off the game sound.
While accessing a sound, press <Options> to access
the following options:
•
•
•
Rename: change the sound name.
Delete: delete the sound.
Set as ring tone: set the sound as your ringtone.
3. Press [
] to confirm your selection.
45
Menu functions
Images (Menu 6.4)
Memory status (Menu 6.6)
This menu displays images downloaded from the
wireless web or received in messages.
Use this menu to check the total amount of memory
for media items and the amount of memory currently
in use in each media box.
While accessing an image, press <Options> to access
the following options:
•
•
•
Rename: change the image name.
Organiser (Menu 7)
Delete: delete the image.
The Organiser feature enables you to keep track of
your schedule and tasks, and to record voice memos.
You can also set time and date and use convenient
features, such as an alarm clock, a calculator, and a
currency converter.
Set as wallpaper: set the image as your
wallpaper for the idle screen.
Delete all (Menu 6.5)
Use this menu to delete all of the downloaded items in
the Games
To access this menu, press <Menu> in Idle mode and
,
Sounds, and Images folders.
select Organiser
.
1. Press [
] to select the folders to be cleared.
Alarm (Menu 7.1)
2. Press <Delete>.
3. Press <Yes> twice to confirm the deletion.
Use this menu to set alarms to ring at a specific time.
Setting an alarm
1. Select the type of alarm.
46
2. Enter the time for the alarm to sound and press
].
Calendar (Menu 7.2)
[
Use this menu to consult the calendar, write memos,
or set alarms to act as a reminder.
3. Select AM or PM in 12-hour time format.
4. If you selected Morning call in step 1, choose
Writing a memo
1. Select a date on the calendar.
2. Enter your memo and press <OK>.
Monday to friday or Monday to saturday
.
Stopping an alarm
•
•
When the alarm sounds, press any key.
To remove an alarm set, access it, press
3. Press [
day.
] to set an alarm to ring on the chosen
<Options> and select Remove alarm.
Otherwise, press <Skip>.
4. Enter the time for the alarm and press [
•
To remove all alarm sets, select Remove alarm
from the Alarm screen.
].
To select an alarm melody, press <Melody>.
Setting the alarm to ring even if the phone is
off
5. Select AM or PM in 12-hour format.
The colour of the date on the calendar changes to
pink to indicate that a memo exists for that date.
From the Alarm screen, select Autopower
→
Enable.
If the phone is off when it is time for the alarm to ring,
the phone switches on and sounds the alarm.
Viewing a memo
1. Select a date which has memos from the calendar.
2. Press [Up] or [Down] to view other memos
scheduled for that day.
47
Menu functions
Using calendar memo options
Time & Date (Menu 7.3)
On the calendar screen, press <Options> to access
the following options:
Use this menu to change the time and date displayed
on your phone. Before setting the time and date,
specify your time zone in World time
.
•
•
•
•
Search all: view all of the memos you created.
Delete all: delete all memos.
•
•
•
Set time: enter the current time.
Set date: enter the current date.
Go to date: go to a specific date.
Exit: exit the Calendar menu.
World time: set your local time zone and find out
what time it is in another part of the world.
While viewing a memo, press <Options> to access
the following options:
•
Time format: select 12-hour or 24-hour time
format.
•
•
•
•
•
•
New: add a new memo.
Edit: edit the memo.
Calculator (Menu 7.4)
Alarm: set an alarm for the memo.
Delete: delete the memo.
Use this menu to perform basic arithmetic functions
such as addition, subtraction, multiplication, and
division.
Copy to: copy the memo to another date.
Move to: change the date of the memo.
1. Enter the first number.
•
Press <.()> to insert a decimal point or a
bracket.
•
Press
[
] or [ ] to move the cursor.
48
2. Press the Navigation keys to access the math
function you want.
To change the status of a specific task, press [
].
While viewing a task or the task list, press <Options
to access the following options:
>
3. Enter the second number.
4. Press [
] to view the result.
•
•
•
•
•
•
New: add a new task.
5. If necessary, repeat from step 2 to continue the
calculation.
Mark: change the status of the task.
Edit: edit the task.
To do list (Menu 7.5)
Sort: sort the task by priority or status.
Copy: copy the task.
Use this menu to create tasks and manage them.
Creating a task
Copy to calendar: copy the task to the calendar
as a memo.
1. Press <New>.
•
•
•
Delete: delete the task.
2. Enter a task and press <OK>.
3. Select a priority level.
Delete all: delete all tasks.
Exit: exit the To do list menu.
4. Enter your deadline and press [
].
Viewing the task
When you select the To do list menu, the tasks display
with a check mark, if the task has been done, and a
priority level indicator;
and for Low.
for High,
for Normal,
49
Menu functions
Memo list (Menu 7.6.2)
Voice memo (Menu 7.6)
Use this menu to access the list of voice memos you
have recorded.
Use this menu to record voice memos. A voice memo
can be up to 30 seconds.
Press <Options> to access the following options:
Voice record (Menu 7.6.1)
1. Press <Record> to start recording.
2. Speak into the microphone.
•
•
•
•
Play: play back your voice memo.
Send: send the voice memo via MMS.
Rename: change the name of the voice memo.
3. When you press <Stop>, or if the recording time
Information: access the properties of the voice
expires, the following options display:
memo.
•
•
Replay: play back your memo.
Re-record: discard the memo and record
another one.
Save: save the memo.
Quit: cancel your recording and exit the Voice
record menu.
•
Delete: delete the voice memo.
Delete all (Menu 7.6.3)
•
•
Use this menu to delete all of the voice memos you
have recorded at one time.
Memory status (Menu 7.6.4)
4. Select Save to save the voice memo.
You can check the total amount of memory and the
amount of memory currently in use for voice memos.
5. Enter a name of the voice memo and press <OK>.
50
Currency exchange (Menu 7.7)
Search (Menu 8.1)
Use this menu to do currency conversions.
Use this menu to search for numbers in Phonebook.
1. Enter the rate of foreign currency and press
Finding an entry
1. Enter the first few letters of the name that you
want to find.
<OK>.
2. Enter the amount of the source currency you want
to convert and press <OK>.
2. Select an entry from the Phonebook list.
The amount you entered and its equivalent value
in the foreign currency display.
3. Scroll to a number and press [ ] to dial, or press
<Options> to access Phonebook options.
Using Phonebook options
Phonebook (Menu 8)
While viewing an entry, press <Options> to access
the following options:
You can store phone numbers on your SIM card and in
your phone’s memory. The SIM card and phone’s
memory are physically separate, but they are used as
a single entity called Phonebook.
•
Paste: paste the number into the normal dialling
mode.
•
•
•
Edit: edit entry information.
To access this menu, press <Menu> in Idle mode and
select Phonebook, or press <Phonebook>.
Delete: delete the number.
Copy: copy the number to the phone’s memory or
SIM card.
•
Caller group: assign a caller group.
51
Menu functions
•
Add entry: add a new entry.
5. Change the location number, if you want, and
press <OK>.
•
Send via IrDA: send the entry via infrared port.
Group search (Menu 8.3)
New entry (Menu 8.2)
Use this menu to search your entries in Phonebook in
caller groups.
Use this menu to add a new entry to Phonebook.
Storing an entry in the phone’s memory
1. Select a number type.
1. Enter the first few letters of the group name.
2. Select a group.
2. Select Phone
.
3. Select the name you want.
3. Enter a name and press <OK>.
4. Press [ ] to dial the number or <Options> to
4. Enter a number or an e-mail address and press
access Phonebook options.
<Save>.
Edit group (Menu 8.4)
5. Change the location number, if you want, and
press <OK>.
Use this menu to edit your caller groups’ properties.
Storing an entry on the SIM card
From the group list, press <Options> to access the
1. Select a number type.
following options:
2. Select SIM
.
•
Call ring tone: set a ringtone for incoming calls
from the group.
3. Enter a name and press <OK>.
•
SMS tone: set a ringtone for incoming messages
from the group.
4. Enter a number and press <Save
>
52
•
•
Graphic: set a graphic icon for incoming calls from
the group.
•
•
Delete all: delete the speed dial settings for all
keys.
Group name: assign a name to the group.
Number: check the name and number assigned to
a key.
Speed dial (Menu 8.5)
Dialling speed dial entries
Use this menu to assign speed dial numbers (2 to 9) to
eight of your most frequently called numbers.
Press and hold the appropriate key in Idle mode.
Delete all (Menu 8.6)
Assigning speed dial entries
1. Select a key location from
for your voicemail server.
2
to
9. Key
1
is reserved
Use this menu to delete all of the entries from
Phonebook.
2. Select an entry from the Phonebook list.
1. Press [
] to select the locations to be cleared.
3. Select a number, if the entry has more than one
number.
2. Press <Delete>.
3. Enter the phone password and press <OK>.
4. Press <Yes> twice to confirm the deletion.
Managing speed dial entries
While viewing the Speed dial screen, press
Memory status (Menu 8.7)
<
Options> to access the following options:
Change: assign a different number to a key.
Delete: delete the speed dial setting for a key.
Use this menu to check the total number of entries
you can store and the number of the entries you have
stored in the phone’s memory or on the SIM card.
•
•
53
Menu functions
With PC (Menu 9.1.1)
SDN (Menu 8.8)
Use this menu to use the infrared feature with a
computer.
This menu is available if your SIM card supports
Service Dialling Numbers (SDN). Use this menu to
view the list of SDNs assigned by your service
provider, including emergency numbers, directory
enquiries, and voicemail numbers.
To use an infrared connection, you must:
•
configure and activate an IrDA-compliant infrared
port on your PC.
Scroll to the number you want and press <Dial> or
•
activate the infrared feature on the phone; the
IrDA icon ( ) appears on the top line of the
display.
[
].
•
align the IrDA port on the phone with the IrDA port
on your phone computer or another phone.
Phone settings (Menu 9)
Use this menu to customise your phone settings. You
can also reset the settings to their default values.
To access this menu, press <Menu> in Idle mode and
select Phone settings
.
Infrared activate (Menu 9.1)
Use this menu to send or receive data to or from IrDA-
compatible computers or phones through the infrared
port.
The connection is ready for data transmission.
54
If there is no communication between your phone and
the IrDA-compliant device within 30 seconds
activating the feature, it is automatically deactivated.
•
•
Save all vCard: save all Phonebook entries.
Discard all vCard: delete all Phonebook
entries.
2. When FDN (Fixed Dialling Number) mode is
enabled on your phone, enter the PIN2 and
press <OK>.
With other phone (Menu 9.1.2)
Use this menu to send or receive Phonebook entries
from another compliant phone.
3. Press <Save> to save the entries.
Sending your Phonebook
Receiving data from another phone
1. Align the IrDA ports on both phones with each
other.
You can send Phonebook entries via IrDA connection.
1. Access Phonebook
2. Select an entry.
→
Search.
2. When the list of the received data displays, select
one of the two options:
To save an individual item:
3. Scroll to a number.
1. Select the item you want from the list.
4. Press <Options> and select Send via IrDA
.
2. Press <Options> and select Save to save the
Display settings (Menu 9.2)
data.
Use this menu to change settings for the display and
light.
Otherwise, select Discard to delete the data.
To save all data:
Wallpaper (Menu 9.2.1)
1. From the item list, press <Options> to select
one of the following options:
You can change the background image and the
settings for the text of Idle mode.
55
Menu functions
•
Wallpaper list: select a background image.
Service light (Menu 9.2.5)
•
Text display: determine the phone displays the
time and date.
The service LED on the front of the phone indicates
when service is available on the phone. Use this menu
to set whether or not the service light is used.
•
Text colour: select a text colour.
Graphic logo (Menu 9.2.6)
Brightness (Menu 9.2.2)
Use this menu to display your service provider’s logo
instead of its name.
You can adjust the brightness of the display for
varying lighting conditions.
Dialling font colour (Menu 9.2.7)
Contrast (Menu 9.2.3)
Use this menu to select a font colour for the numbers
entered while dialling.
You can adjust the contrast of the display for varying
lighting conditions.
Backlight (Menu 9.2.4)
Greeting message (Menu 9.3)
You can select the length of time the backlight and the
display stay on.
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
•
Backlight on: select the length of time the
backlight stays on.
Own number (Menu 9.4)
•
Backlight dim: select the length of time the
display is in Dimming mode after the backlight
turns off. After a specified time, the display turns
off.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes made
here do not affect the actual subscriber numbers on
your SIM card.
56
Change PIN (Menu 9.6.2)
Language (Menu 9.5)
Use this menu to change your PIN. The PIN check
feature must be enabled to use this feature.
Use this menu to select one of several languages for
the display text.
Phone lock (Menu 9.6.3)
Security (Menu 9.6)
The Phone lock feature locks the phone from
unauthorised use.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and SIM card.
When this feature is enabled, you must enter a 4- to
8-digit phone password each time the phone is
switched on.
If you enter an incorrect PIN/PIN2 three times in
succession, the SIM card is blocked. To unblock it
you need to enter your PUK/PUK2 (Personal
Unblocking Key). The codes are supplied by your
network operator.
The password is preset to 00000000. To change the
password, use the Change password menu.
Change password (Menu 9.6.4)
Use this menu to change your phone password.
PIN check (Menu 9.6.1)
The 4-to 8-digit PIN (Personal Identification Number)
protects your SIM card against unauthorised use.
When this feature is enabled, the phone requires your
PIN each time it is switched on.
Privacy (Menu 9.6.5)
Use this menu to lock your media contents, including
MMS messages, voice memos, images, and sounds.
1. Press [
] to select the items to be locked.
2. Press <OK> to lock the marked items.
57
Menu functions
3. Enter the phone password and press <OK>.
Extra settings (Menu 9.7)
To access a locked item, you need to enter the phone
password.
You can turn the automatic redialling or answering
feature on or off.
•
Auto redial: set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
SIM lock (Menu 9.6.6)
The SIM lock feature allows your phone to work only
with the current SIM by assigning a SIM lock code. You
must enter the SIM lock code to use a different SIM
card.
•
•
Active folder: answer an incoming call by opening
the phone.
Anykey answer: answer an incoming call by
pressing any key, except <Reject> or [ ].
FDN mode (Menu 9.6.7)
If supported by your SIM card, Fixed Dialling Number
(FDN) mode restricts your outgoing calls to a limited
set of phone numbers. When this feature is enabled,
you can make calls only to phone numbers stored on
the SIM card.
Short cut (Menu 9.8)
You can use the Navigation keys as shortcut keys to
access specific menus directly from Idle mode. Use
this menu to change the shortcut assignments for the
keys.
Change PIN2 (Menu 9.6.8)
If supported by your SIM card, the Change PIN2
feature changes your current PIN2.
1. Select a key to be used as a shortcut key.
2. Select a menu to be assigned to the key.
58
Reset settings (Menu 9.9)
Solve problems
Help and personal needs
Use this menu to reset the phone’s settings you have
changed.
To save the time and expense of an unnecessary
service call, perform the simple checks in this section
before contacting a service professional.
Enter the 4- to 8-digit phone password and press
<
OK>.
The password is preset to 00000000. You can
change this password. p. 57
When you switch on your phone, the
following messages may appear:
ꢀ
“Insert SIM card”
•
Be sure that the SIM card is correctly installed.
“Phone locked Enter password”
•
The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
“Enter PIN”
•
You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
•
The PIN check feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN check menu.
59
Solve problems
“Enter PUK”
•
•
Be sure you are accessing the correct cellular
network.
•
The PIN code has been entered incorrectly three
times in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
Be sure that you have not set an outgoing call
barring option.
“No service,” “Network failure,” or “Not
done” displays
Your correspondent cannot hear you speaking
•
•
Be sure you have switched off the microphone.
•
The network connection has been lost. You may be
in a weak signal area. Move and try again.
Be sure you are holding the phone close enough to
your mouth. The microphone is located at the
bottom of the phone.
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
The phone starts beeping and “Warning Low
battery” flashes on the display
You have entered a number but it was not
dialled
•
Your battery is insufficiently charged. Recharge the
battery.
•
•
Be sure that you have pressed [ ].
The audio quality of the call is poor
Be sure you have accessed the right cellular
network.
•
Check the signal strength indicator on the display
). The number of bars indicates the signal
strength from strong ( ) to weak ( ).
(
•
Be sure that you have not set an outgoing call
barring option.
•
Try moving the phone slightly or moving closer to a
window if you are in a building.
Your correspondent cannot reach you
•
Be sure your phone is switched on. ([ ] pressed
for more than one second.)
60
No number is dialled when you re-call a
Phonebook entry
Health and safety information
•
Use the Search menu to ensure the number has
been stored correctly.
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
•
Re-store the number, if necessary.
The battery doesn’t charge properly or the
phone sometimes turns itself off
Your mobile phone is a radio transmitter and receiver.
It is designed and manufactured to not exceed the
limits for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part
of comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines were developed by independent scientific
organisations through the periodic and thorough
evaluation of scientific studies. The limits include a
substantial safety margin designed to ensure the
safety of all persons, regardless of age and health.
•
Wipe the charging contacts both on the phone and
on the battery with a clean soft cloth.
If the above guidelines do not help you to
solve the problem, take note of:
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the EU
*
Council is 2.0W/kg.
The highest SAR value for this model phone was
0.740W/kg.
61
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the phone
while operating can be well below the maximum value.
This is because the phone is designed to operate at
multiple power levels so as to use only the power
required to reach the network. In general, the closer
you are to a base station, the lower the power output
of the phone.
Precautions when using batteries
•
Never use a charger or battery that is damaged in
any way.
•
•
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
•
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will gradually
wear out. When the operation time is noticeably
shorter than normal, it is time to buy a new
battery.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE Directive
must be shown. This directive includes as one of its
essential requirements the protection of the health
and safety of the user and any other person.
* The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The
limit incorporates a substantial margin of safety to give addi-
tional protection for the public and to account for any variations
in measurements. The SAR values may vary, depending on
national reporting requirements and the network band.
If left unused, a fully charged battery will
discharge itself over time.
62
•
Use only Samsung-approved batteries, and
recharge your battery only with Samsung-
approved chargers. Disconnect the charger from
the power source when it is not in use. Do not
leave the battery connected to a charger for more
than a week, since overcharging may shorten its
life.
•
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do not
carry a spare battery in a pocket or bag where the
battery may contact metal objects. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
•
•
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
•
Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0°C (32°F).
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user must
uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone while driving, follow
local regulations in the country or region you are in.
63
Health and safety information
Operating environment
Electronic devices
Remember to follow any special regulations in force in
the area you are in, and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against the
RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be maintained
between a wireless phone and a pacemaker to avoid
potential interference with the pacemaker. These
recommendations are consistent with the independent
research and recommendations of Wireless Technology
Research. If you have any reason to suspect that
interference is taking place, switch off your phone
immediately.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation of
the equipment and for the safety of personnel, it is
recommended that the equipment should only be used
in the normal operating position (held to your ear with
the antenna pointing over your shoulder).
Hearing aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you
may wish to consult your hearing aid manufacturer to
discuss alternatives.
64
Other medical devices
Potentially explosive environments
If you use any other personal medical devices, consult
the manufacturer of your device to determine if it is
adequately shielded from external RF energy.
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even
death.
Your physician may be able to assist you in obtaining
this information.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas), chemical plants, or where blasting operations
are in progress.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include the
areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
65
Health and safety information
Emergency calls
Other important safety information
•
Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty installation
or service may be dangerous and may invalidate
any warranty applicable to the device.
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore, you
should never rely solely on any wireless phone for
essential communications like medical emergencies.
•
•
Check regularly that all wireless phone equipment
in your vehicle is mounted and operating properly.
To make or receive calls, the phone must be switched
on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless
phone networks or when certain network services and/
or phone features are in use. Check with local service
providers.
Do not store or carry flammable liquids, gases, or
explosive materials in the same compartment as
the phone, its parts, or accessories.
•
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag or
in the air bag deployment area. Improperly
installed wireless equipment could result in serious
injury if the air bag inflates.
To make an emergency call:
1. Switch on the phone.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
3. Press [ ].
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
•
Switch off your phone before boarding an aircraft.
It is dangerous and illegal to use wireless phones
in an aircraft because they can interfere with the
operation of the aircraft.
66
•
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
•
•
Do not use or store the phone in dusty, dirty areas,
as its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
•
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the phone,
which may damage the phone’s electronic circuit
boards.
•
Keep your phone and all its parts and accessories
out of the reach of small children and pets. They
may inadvertently damage these things or choke
on small parts.
•
•
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
Do not use harsh chemicals, cleaning solvents, or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in a mild soap-and-
water solution.
•
•
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
•
Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
67
Health and safety information
•
Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator. The
phone may explode when overheated.
•
When the phone or battery gets wet, the label
indicating water damage inside the phone changes
colour. In this case, phone repairs are no longer
guaranteed by the manufacturer's warranty, even
if the warranty for your phone has not expired.
•
•
If your phone has a flash or light, do not use it too
close to the eyes of people or animals. This may
cause damage to their eyes.
Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified
accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger, or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
68
Index
Call cost • 28
Call records
A
D
F
ABC mode, text input • 19
Active folder • 58
Alarm • 46
Date, set • 48
Deleting
FDN (Fixed Dialling Number)
mode • 58
dialled • 28
missed • 27
received • 28
call records • 27
Folder tone • 33
Funbox • 42
Answering
MMS • 38, 39, 41
phonebook • 53
SMS • 34, 41
Call time • 28
Caller ID • 31
Calls
call • 23
G
second call • 24
Anykey answer • 58
Auto redial • 58
Games • 45
Delivery reports, message • 41
Dialled calls • 28
Dialling font, set • 56
Display
Greeting message • 56
answering • 23
barring • 30
holding • 24
redialling • 22
rejecting • 23
transferring • 25
waiting • 30
H
B
Health and safety • 61
Holding, call • 24
Background image • 56
Backlight time, set • 56
Band selection • 31
Barring, calls • 30
Battery
backlight, set • 56
brightness • 56
contrast • 56
icons • 10
language • 57
layout • 10
service light, set • 56
settings • 55
I
Icons, description • 10
Images, downloaded • 45
Inbox, messages
MMS • 38
CB (Cell Broadcast) messages •
37
Characters, enter • 19
Connection tone • 33
Converter • 51
Creating messages
MMS • 39
charging • 7
low indicator • 8
precautions • 62
Broadcast messages • 37
Browser, web • 42
SMS • 34
Infrared port • 54
International calls • 22
Internet • 42
Diverting calls • 29
DTMF tones, send • 25
C
E
SMS • 35
CUG (Closed User Group) • 31
Calculator • 48
Calendar • 47
J
Emergency calls • 66
Java applications • 45
69
Index
Minute minder • 33
Missed calls • 27
MMS messages
Phone
care and maintenance •
67
display • 10
Redialling
automatically • 58
manually • 22
Resetting phone • 59
Ringer
incoming calls • 32
messages • 32
Road safety • 63
Roaming • 30
K
Keypad tones
selecting • 32
creating/sending • 39
deleting • 39
setting • 41
sending/muting • 25
volume • 32
icons • 10
locking • 13, 57
password • 57
resetting • 59
switching on/off • 8
unpacking • 6
L
viewing • 38
Language, select • 57
Last number, redial • 22
Locking
Multiparty-calls • 26
N
Names
S
menu functions • 57
phone • 57
SIM card • 58
Phonebook
entering • 19
searching • 51
Network band, selection • 30
Network services • 29
Safety
adding • 52
deleting • 53
finding • 51
options • 51
speed dialling • 53
information • 61
SDN (Service Dialling
Numbers) • 54
Security, calls • 57
Sent messages
MMS • 38, 39
SMS • 34
Service light • 56
Shortcut • 13, 58
Silent mode • 13
SIM card
Low battery indicator • 8
M
O
Memory status
downloaded items • 46
messages • 41
phonebook • 53
Message tone • 32
Messages
PIN, change • 57
Organiser • 46
Outbox, messages
MMS • 39
PIN2, change • 58
Power on/off tone • 33
Privacy • 57
Problems, solve • 59
Push messages • 42
SMS • 34
P
cell broadcast • 37
greeting • 56
MMS • 38
push • 42
SMS • 33
Password
call barring • 30
phone • 57
R
inserting • 7
locking • 58
Received calls • 28
Recording, voice memos • 50
voice • 37
70
SMS messages
creating/sending • 35
Web browser
access • 42
bookmarks • 43
World time • 46
deleting • 37
setting • 36
viewing • 34
Sound settings • 32
Sounds, downloaded • 45
Speakerphone • 25
Speed dial • 53
Switching on/off
microphone • 25
phone • 8
T
T9 mode, text input • 20
Templates
MMS • 39
SMS • 35
Text, enter • 19
Time, set • 48
V
Voice memos • 50
Voicemail server • 37
W
Waiting call • 30
Wallpaper • 55
71
|
