Samsung SGH E630 User Manual

* Some of the contents in this manual may differ from your  
phone, depending on the software installed or your  
service provider.  
Printed in Korea  
Code No.: GH68-05964A  
English. 11/2004. Rev.1.2  
World Wide Web  
http://www.samsungmobile.com  
Contents  
Important safety precautions........................... 7  
Unpacking ........................................................ 9  
Your phone..................................................... 10  
Phone layout........................................................... 10  
Display................................................................... 13  
Backlight ................................................................ 16  
Camera.................................................................. 16  
Plug-in speaker ....................................................... 17  
Built-in antenna....................................................... 17  
Getting started............................................... 18  
Inserting/Removing the SIM card............................... 18  
Installing/Removing/Charging the battery................... 19  
Switching the phone on or off.................................... 23  
Selecting functions and options.................................. 24  
Locking or unlocking the keypad................................ 26  
Call functions ................................................. 27  
Making a call........................................................... 27  
Ending a call ........................................................... 30  
Answering a call ...................................................... 30  
Rejecting a call........................................................ 30  
Adjusting the volume ............................................... 31  
Accessing options during a call .................................. 31  
Using the headset.................................................... 40  
Using the plug-in speaker ........................................ 40  
Entering text .................................................. 41  
Changing the text input mode ................................... 42  
Using T9 mode........................................................ 43  
Using ABC mode...................................................... 45  
Using symbolic mode ............................................... 48  
Using number mode................................................. 48  
Using the menus ............................................ 49  
Accessing a menu function........................................ 49  
List of menu functions.............................................. 50  
Phonebook menu............................................ 56  
3
Contents  
Find name .............................................................. 56  
Add entry ............................................................... 59  
Speed-dial list ........................................................ 60  
Copy all to phone..................................................... 62  
Send all via infrared................................................. 63  
Delete all................................................................ 65  
Own number........................................................... 66  
Group setting.......................................................... 67  
Memory status ........................................................ 68  
Service directory ..................................................... 68  
SAT (SIM Application Toolkit) ....................... 69  
Call records .................................................... 70  
Missed calls............................................................. 70  
Received calls ......................................................... 70  
Dialled calls ........................................................... 71  
Delete all................................................................ 71  
Call time................................................................. 72  
Call costs................................................................ 72  
Network services............................................ 74  
Call diverting........................................................... 74  
Call barring............................................................. 76  
Call waiting............................................................. 79  
Network selection .................................................... 80  
Caller ID................................................................. 81  
Band selection......................................................... 81  
Active line............................................................... 82  
Sound settings ............................................... 83  
Incoming calls......................................................... 83  
Messages................................................................ 84  
Power on/off ........................................................... 85  
Connection tone ...................................................... 85  
Key tone................................................................. 86  
Minute minder......................................................... 86  
Quiet mode............................................................. 86  
Slide tone............................................................... 87  
Alerts on call........................................................... 87  
Messages........................................................ 88  
Short messages....................................................... 88  
Multimedia messages ............................................... 95  
4
Contents  
Push messages...................................................... 106  
Preset messages.................................................... 107  
Voice mail............................................................. 107  
Broadcast............................................................. 108  
Settings ............................................................... 110  
Memory status ..................................................... 114  
Fun box ........................................................ 115  
WWW services....................................................... 115  
Media box............................................................. 121  
JAVA world ........................................................... 125  
Melody composer................................................... 130  
Organiser ..................................................... 134  
New memo ........................................................... 134  
Calendar............................................................... 136  
To do list.............................................................. 139  
Clock ................................................................... 140  
Alarm................................................................... 142  
Voice recorder....................................................... 144  
Calculator............................................................. 146  
Conversion ........................................................... 147  
Timer................................................................... 149  
Stopwatch ............................................................ 150  
Camera......................................................... 151  
Take photos.......................................................... 151  
My photos............................................................. 157  
My albums............................................................ 157  
Delete all.............................................................. 157  
Settings .............................................................. 158  
Memory status ...................................................... 159  
Phone settings ............................................. 160  
Display................................................................. 160  
Greeting message.................................................. 162  
Language ............................................................. 162  
Security ............................................................... 163  
Auto redial............................................................ 166  
Voiceclarity........................................................... 166  
Slide settings ....................................................... 167  
Anykey answer...................................................... 167  
Infrared activation ................................................. 168  
Reset settings ....................................................... 168  
5
Contents  
Using ALS (Alternate Line Service)............... 169  
Solving problems.......................................... 171  
Access codes ................................................ 174  
Phone password .................................................... 174  
PIN...................................................................... 174  
PIN2 .................................................................... 175  
PUK ..................................................................... 175  
PUK2 ................................................................... 175  
Call barring password............................................. 176  
Health and safety information...................... 177  
SAR certification information ................................... 177  
Precautions when using batteries............................. 178  
Road safety .......................................................... 180  
Operating environment........................................... 180  
Electronic devices .................................................. 181  
Potentially explosive atmospheres............................ 183  
Emergency calls .................................................... 183  
Other important safety information .......................... 184  
Care and maintenance............................................ 185  
Glossary ....................................................... 187  
Index ........................................................... 191  
Quick reference card .................................... 195  
6
Important safety  
precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road safety at all times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching off when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching off in aircraft  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Switching off near all medical equipment  
Switch off your phone near the medical equipment.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF  
energy. Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special regulations  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
Water resistance  
Your phone is not water-resistant. Keep it dry.  
7
Important safety precautions  
Sensible use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on, especially when the phone  
is in service.  
Emergency call  
Key in the emergency number for your present  
location, then press the  
key. Give all the  
necessary information as accurately as possible. Do  
not cut off the call until given permission to do so.  
Keeping small children away from your phone  
Keep the phone and all its parts including  
accessories out of the reach of small children.  
Accessories and batteries  
Use only Samsung-approved accessories. Use of any  
unauthorised accessories could damage your phone  
and may be dangerous.  
Use only Samsung-approved batteries and recharge  
your battery only with Samsung-approved chargers.  
Qualified service  
Only qualified service personnel may install or repair  
your phone.  
For more detailed safety information, see “Health  
and safety information” on page 177.  
CAUTION  
RISK OF EXPLOSION IF BATTERY IS REPLACED BY  
AN INCORRECT TYPE  
DISPOSE USED BATTERIES ACCORDING TO THE  
INSTRUCTIONS  
8
Unpacking  
Your package contains the following items:  
Travel adapter  
Phone  
Battery  
Owner’s manual  
Plug-in speaker  
Note: The items supplied with your phone may be  
different depending on the country.  
In addition, you can obtain the following  
accessories for your phone from your local  
Samsung dealer:  
• Advanced handsfree car kit  
• Simple handsfree car kit  
• PC data link kit  
• Headset  
9
Your phone  
Phone layout  
The following illustrations show the main elements  
of your phone:  
(Reverse side)  
Flash  
Camera  
Mirror  
Earpiece  
Display  
Navigation keys  
(Up/Down/Left/  
Right)  
Ear-microphone  
jack  
Soft key (left)  
Volume keys  
Soft key (right)  
WAP Browser  
Power On/Off /  
Menu exit key  
key  
Dial/Menu  
confirmation key  
Camera key  
Alphanumeric  
keys  
Cancel/Back/  
Correction key  
IrDA port  
Special  
function keys  
Microphone  
Charger  
connector  
10  
Your phone  
h
Key(s)  
Description  
Perform the functions indicated by the  
text above them, on the bottom line of  
the display.  
(soft keys)  
In menu mode, scroll through the menu  
options.  
In idle mode, the Left key enters the  
New SMS message writing screen,  
the Right key enters the Incoming  
call’s melody setting menu and the  
Down key enters the Voice recorder  
menu. The Up key enters the Camera  
menu, when pressed and held, it  
switches the phone to the capture  
mode.  
In idle mode, launches the WAP  
(Wireless Application Protocol) browser  
directly.  
Makes or answers a call.  
In idle mode, accesses the call log list.  
In menu mode, selects a menu function  
or stores information that you have  
entered, such as a name in the phone  
or SIM memory.  
Deletes characters from the display.  
When pressed and held in idle mode,  
quickly accesses the New memo  
screen.  
In menu mode, returns to the previous  
screen.  
11  
Your phone  
Key(s)  
Description (continued)  
Ends a call.  
When pressed and held, switches the  
phone on or off.  
In menu mode, cancels your input and  
returns to idle mode.  
When pressed and held in idle mode,  
quickly accesses your voice mail server.  
Enter numbers, letters and some  
special characters.  
Used for various purposes in different  
functions.  
When pressed and held while entering a  
phone number, the  
pause.  
key enters a  
When pressed and held in idle mode,  
the  
key enters or exits the quiet  
mode.  
(on the left side of the phone)  
During a call, adjust the earpiece  
volume.  
In idle mode, adjust the key tone  
volume.  
In the capture mode, flip the picture  
vertically by pressing the volume up  
key and horizontally by pressing the  
volume down key.  
12  
Your phone  
Key(s)  
Description (continued)  
(on the right side of the phone)  
When pressed and held, turns the  
camera capture mode on. In capture  
mode, works as a camera shutter.  
Display  
Display layout  
The display has three areas:  
Icons  
Text and  
graphic area  
Soft keys  
indications  
Menu  
Phonebook  
Area  
Description  
First line  
Displays various icons. See  
page 14.  
Middle  
Display messages, instructions  
and any information that you  
enter, such as number to be  
dialled.  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
13  
Your phone  
Icons  
Icon Description  
Shows the received signal strength. The  
more bars, the stronger the signal.  
Appears when a call is in progress.  
Appears when you are out of a service  
area. When it displays, you cannot make  
or receive calls.  
Appears when you have new or  
unchecked voice messages. When your  
SIM card supports ALS (Alternate Line  
Service), this icon may appears like  
, or  
,
.
Appears when you have new or unread  
messages.  
Appears when you have new or  
unchecked multimedia messages.  
Appears when you are retrieving a  
multimedia message.  
Appears when you are sending a  
multimedia message.  
Appears when you set an alarm to sound  
at the specified time.  
Appears when the IrDA port is active. For  
details, see page 168.  
Appears when you connect the phone to  
the computer by the IrDA port.  
14  
 
Your phone  
Icon Description (continued)  
Appears when you are connected to a  
GPRS-enabled network.  
Appears when the call diverting feature is  
activated. When your SIM card supports  
ALS (Alternate Line Service), this icon  
may appear with the number 1, 2, or  
both. For example,  
,
, or  
.
Appears when you are in your home zone.  
Only if your service provider supports this.)  
(
Appears when you are in your office zone.  
Only if your service provider supports this.)  
(
Appears when you set the alert type for  
incoming calls to Vibration or Vibration  
then melody. For further details, see  
page 84.  
Appears when the quiet mode is active.  
Shows the level of your battery. The more  
bars you see, the more power you have  
left.  
15  
Your phone  
Backlight  
The display and the keypad are illuminated by a  
backlight. When you press any key, the backlight  
illuminates. It turns off if you don’t press any key  
within a given period of time, depending on the  
Backlight menu option. For further details, see  
page 161.  
Camera  
The camera embedded in your phone allows you to  
take a picture of people or events while on the  
move.  
For further details about using the Camera feature,  
see page 151.  
(Reverse side)  
16  
Your phone  
Plug-in speaker  
With the plug-in speaker, you can hear sounds more  
loudly.  
To use it, take off the cover and then connect the  
plug-in speaker to the ear-microphone jack at the  
right side of the phone.  
Built-in antenna  
Your phone has a built-in antenna. As with other  
mobile radio transmitting equipment, do not touch  
the antenna unnecessarily when the phone is  
switched on. Contact with the antenna affects call  
quality and may cause the phone to operate at a  
higher power level than needed.  
17  
Getting started  
Inserting/Removing the SIM card  
When you subscribe to a cellular network, you are  
provided with a SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available and so on.  
• Keep all miniature SIM cards out of the reach of  
small children.  
• The SIM card and its data can be easily damaged  
by scratches or bending, so be careful when  
handling, inserting, or removing the card.  
• When installing the SIM card, always make sure  
that the phone is switched off before you remove  
the battery.  
Inserting the SIM card  
1. If necessary, remove the battery by referring to  
page 20.  
2. Insert and slide the SIM card under the tab,  
ensuring that the notched corner is top left and  
the gold contacts of the card face into the  
phone.  
18  
Getting started  
Removing the SIM card  
To remove the SIM card, slide it out, as shown, and  
remove it from the socket.  
Installing/Removing/Charging the  
battery  
Your phone is powered by a rechargeable Li-ion  
battery. Use only approved batteries and chargers.  
Ask your local Samsung dealer for further details.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
standard battery is fully recharged in  
approximately 130 minutes.  
Installing the battery  
1. Insert the teeth on the top of the battery into  
the corresponding slots on the phone.  
19  
Getting started  
2. Press the battery against the back of the phone  
until it clicks into place.  
Removing the battery  
1. Switch off the phone by pressing and holding the  
key.  
2. To remove the battery, push the battery catch  
and hold it in that position. Lift the battery away  
from the phone.  
20  
 
Getting started  
Charging the battery by using the travel  
adapter  
Note: The phone can be used while the battery is  
being charged, but this causes the battery to  
charge more slowly.  
1. Plug the travel adapter connector into the jack  
at the bottom of the phone.  
Check that the arrow on the connector is facing  
towards the front of the phone.  
2. Plug the adapter into a standard AC wall outlet.  
While charging, the battery icon at the top right  
corner of the display repeatedly fills to show that  
the battery is charging.  
21  
Getting started  
3. When charging is finished, disconnect the  
adapter from the power outlet and from the  
phone by pressing the grey tabs on both sides of  
the connector and pulling the connector out.  
Low battery indicator  
When the battery is weak and only a few minutes of  
talk time remain, the battery sensor informs you in  
the following ways: an empty battery icon flashes  
(
), you hear a warning tone and a message  
repeats at regular intervals on the display.  
When the battery becomes too weak for the phone  
to operate, it switches off automatically.  
22  
Getting started  
Switching the phone on or off  
To switch the phone on:  
1. Hold down the  
switches on.  
key until the phone  
2. If the phone asks for a PIN, enter the PIN and  
press the OK soft key. For further details, see  
page 174.  
The phone searches for your network and the  
current date and time appear on the display.  
Once connected to a network, you can make or  
receive calls.  
Service Provider  
Mon 21 Jun 04  
12:53  
Menu  
Phonebook  
Note: To change the language, use the  
Language menu option. For further  
details, see page 162.  
To switch the phone off:  
Hold down the  
displays.  
key until the power-off image  
23  
Getting started  
Selecting functions and options  
Your phone offers a set of functions that allows you  
to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via  
the two soft keys marked  
and  
. Each menu  
and sub-menu allow you to view and alter the  
settings of a particular function.  
The roles of the soft keys vary according to the  
function you are currently using; the labels or icons  
on the bottom line of the display, just above the soft  
keys, indicates its current role.  
Example:  
Service Provider  
Mon 21 Jun 04  
12:53  
Menu Phonebook  
Press the right soft  
key to access the  
Phonebook feature.  
Press the left soft  
key to access the  
menu functions.  
24  
Getting started  
To view various functions/options available, or  
select the one is required:  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
Select soft key.  
• function displayed  
• option highlighted  
view the next function or Down key.  
highlight the next option  
on a list  
move back to the  
previous function or  
option on a list  
Up key.  
move back up one level  
in the structure  
(or Back) soft  
key or key.  
C
return to idle mode  
key.  
In some functions, you may be asked for a  
password or PIN. Enter the required code and press  
the OK soft key.  
25  
Getting started  
Locking or unlocking the keypad  
You can lock the soft keys, navigation keys, WAP  
brower key, volume keys and camera key to avoid  
pressing keys by accident.  
To lock the keys, slide the folder down.  
Note: Be careful with your finger when you slide the  
folder down.  
If you select the Stop operation from the Down  
option in the Slide settings menu (see page 167),  
the phone locks the keys automatically when you  
slide the folder down.  
Otherwise, if you select the Continue operation  
from the Down option in the Slide settings menu  
(see page 167), the confirming message appears  
on the display a few minutes after you slide the  
folder down in the idle mode. In the message, you  
can lock the keys by pressing the Yes soft key. If  
you don't press the Yes or No soft keys in the  
confirming message, the phone locks the keys after  
a little while.  
To unlock the keys, slide the folder up, press the  
Unlock soft key, or press the  
soft key and then  
press the OK soft key again.  
26  
Call functions  
Making a call  
Using the number keypad  
When the idle screen is displayed, enter the area  
code and phone number, and press the  
key.  
Note: If you have set the Auto redial option to On  
,
the number is redialled automatically up to ten  
times if the person you called does not answer,  
or the line is busy. For further details, see  
page 166.  
Correcting the number  
To clear  
Press the  
C key.  
the last digit  
displayed  
any other digit in  
the number  
Navigation keys until the  
cursor (|) is immediately to  
the right of the digit to be  
cleared and press the  
C
key.  
You can also insert a missing  
digit simply by pressing the  
appropriate key with the  
cursor in the appropriate  
position.  
all digits displayed  
C
key and hold it down for  
more than one second.  
27  
 
Call functions  
Making an international call  
1. Press and hold the  
0
key for the international  
prefix. The + character will appear when the  
phone is ready for further input.  
2. Enter the country code, area code and phone  
number and press the  
key.  
Making a call from Phonebook  
You can store the names and phone numbers called  
regularly in the SIM card and phone’s memory,  
which are jointly referred to as the Phonebook. You  
then do not need to remember all your numbers;  
simply select the required name to recall the  
associated number.  
For further details about the Phonebook feature,  
see page 56.  
Using the call logs  
The phone stores up to 20 calls you have dialled,  
received or missed chronologically. The last call is  
saved in the first position. If the same number  
occurs more than once, only the latest occurrence is  
saved.  
To recall any of these numbers:  
1. Press the  
log list.  
key in idle mode to access the call  
2. Use the Up or Down key to scroll through the list  
until the number you want highlights.  
The call logs are listed with the following icons:  
: Dialled calls  
: Received calls  
: Missed calls  
28  
Call functions  
3. To dial the number, press the  
key.  
To view each call record, see “Call records” on  
page 70.  
Viewing missed calls  
If you have a subscription that includes the Caller  
Line Identification (CLI) feature and you are unable  
to answer a call for any reason, you can find out  
who was calling you so that you can call the person  
back.  
The number of missed calls displays on the idle  
screen immediately after a call was missed.  
To view the missed calls immediately:  
1. Press the Missed soft key.  
The list of the missed calls displays.  
2. If necessary, scroll to the number you want by  
pressing the Up or Down key.  
3. To dial the number, press the  
key.  
To use the missed call options, see “Missed calls” on  
page 70.  
Note: To clear the missed call notification on the  
display, press the  
key. When you also  
have voice mails, short messages, or  
multimedia messages and multi CBs, the right  
soft key indication changes in the following  
order: Missed  
,
Connect, View, CB and  
Phonebook  
.
Speed-dialling from Phonebook  
Once you have stored numbers in your Phonebook,  
you can dial a number simply by pressing one or  
two keys. For further details, see page 60.  
29  
Call functions  
Ending a call  
When you want to finish your call, briefly press the  
key.  
Note: If you select the Continue operation from the  
Down option in the Slide settings menu, you  
cannot finish your call by sliding the folder down.  
Answering a call  
When somebody calls you, the phone rings and  
displays the incoming call image.  
If the caller can be identified, the caller’s phone  
number, or name if stored in the Phonebook, will be  
displayed.  
To answer a call, press the  
key, or Accept soft  
key. Or, slide the folder up if you select the Accep  
call from the Up option in the Slide settings menu.  
Note: You can answer a call while using Phonebook or  
menu features. The current operation will be  
stopped if interrupted.  
Rejecting a call  
To reject an incoming call, press the  
slide the folder down.  
key, or  
Note: If you select the Continue operation from the  
Down option in the Slide settings menu, you  
cannot reject your call by sliding the folder  
down.  
30  
Call functions  
Adjusting the volume  
During a call, if you wish to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
When you hear a sound, such as ringtone, you can  
also adjust the earpiece volume. The adjusted  
volume level will be temporary. It will return to it’s  
default setting.  
Note: When a call comes in, you can mute the call  
ringer by pressing and holding one of the  
volume keys.  
Accessing options during a call  
Your phone provides a number of control functions  
that you can use during a call.  
Using the loudspeaker  
You can speak and listen to the phone from a short  
distance without holding the phone to your ear.  
Turn on / off the loudspeaker  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the  
Normal  
/
Speaker on option. Press the Select  
soft key.  
CAUTION: Do not hold the phone near to your ear  
when you use the loudspeaker. Volume may be  
extremely loud.  
31  
Call functions  
Switching the microphone off (Mute)  
You can temporarily switch your phone’s  
microphone off so that the other person cannot  
hear you.  
Example: You may wish to say something to  
another person in the room but do not  
want the calling person to hear you.  
1. Press the Options soft key.  
2. When Mute highlights, press the Select soft  
key.  
The mute icon (  
) appears on the bottom line  
of the display and your correspondent cannot  
hear you.  
To switch the microphone back on:  
1. Press the Options soft key.  
2. When Unmute highlights, press the Select soft  
key.  
The mute icon disappears and your  
correspondent can hear you.  
Searching for a number in Phonebook  
You can search for a number in your Phonebook  
during a call.  
1. Press the Options soft key.  
2. If necessary, press the Up or Down key to  
highlight the Phonebook option. Press the  
Select soft key.  
32  
Call functions  
3. Select the Find name option and press the  
Select soft key.  
The Phonebook entries are listed.  
4. Enter the first a few letters of the name that you  
want to find.  
The Phonebook entries are listed starting with  
the first entry matching your input.  
Note: You can also scroll through Phonebook from  
the beginning, by pressing the Up or Down  
key  
.
5. To view the highlighted entry, press the OK soft  
key.  
For further details about the Phonebook feature,  
see page 56.  
Muting/Sending key tones  
You can turn the key tones off or on during a call.  
When the Mute keys option is selected, your phone  
does not transmit the key tones. It allows you to  
press keys without hearing annoying key tones  
during a call.  
To communicate with answering machines or  
computerised telephone systems, the Send keys  
option must be selected.  
Sending DTMF tones  
You can send the DTMF(Dual Tone Multi-Frequency)  
tones of the number on the display during a call.  
This option is helpful for entering a password or  
account number when you call an automated  
system, like a banking service.  
33  
Call functions  
To send the DTMF tones:  
1. When you are connected to the teleservice  
system, press the Options soft key.  
2. Press the Up or Down key to highlight the Send  
DTMF option. Press the Select soft key.  
3. Enter the number you want to send and press  
the OK soft key.  
The tones of the displayed number are sent.  
Using the message service  
You can read or write a new message during a call.  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the  
Message option. Press the Select soft key.  
3. To read a received message, select the Inbox  
option, and then scroll to the message that you  
want to read.  
To write a new message, select the Create  
option.  
4. Press the Select soft key.  
For further details about the SMS feature, see  
page 88.  
Using the voiceclarity  
The voiceclarity feature makes received sound loud  
and clear during a call. It is useful when you are in  
a noisy place.  
34  
Call functions  
The phone turns on the voiceclarity feature  
automatically after a while when you are in a noisy  
place and the voiceclarity is set to on.  
Turn on / off the voiceclarity  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the  
Voiceclarity on / Voiceclarity off option.  
Press the Select soft key.  
Note: You cannot activate the voiceclarity when you  
use the loudspeaker and handsfree car kit.  
Using the Conv. record  
You can record a conversation during a call.  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the Conv.  
record option. Press the Select soft key to start  
recording the conversation.  
3. To stop recording, press the Stop soft key. The  
recording also stops if the recording time  
expires. The recorded conversation is saved in  
your phone automatically.  
4. To hear the recorded conversation, see the Fun  
box menu.  
Using the SAT (SIM Application Toolkit)  
If you use a SAT card that provides additional  
services, the SAT menu displays. For further details,  
see your SIM card instructions.  
35  
Call functions  
Putting a call on hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if this service is supported by the  
network. Of these two calls, one is active and the  
other is on hold and you can switch between the  
calls.  
To place a call on hold, press the Options soft key  
and select the Hold option. You can reactivate the  
call whenever you want by pressing the Retrieve  
soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you want to dial or  
look it up in Phonebook.  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or alternatively:  
1. Put the current call on hold by pressing the  
Options soft key and select the Hold option.  
2. Make the second call in the normal way.  
To switch between the two calls, press the Options  
soft key and select the Swap option.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other person.  
To end the call on hold, press the Options soft key  
and select the End held call option.  
When you want to finish, end each call normally by  
pressing the  
key.  
36  
 
Call functions  
Note: If you select the Continue operation from the  
Down option in the Slide settings menu, you  
cannot finish your call by sliding the folder  
down.  
Answering a second call  
You can answer an incoming call while you have a  
call in progress, if this service is supported by the  
network and you have activated the Call waiting  
option (see page 79). You will be notified of an  
incoming call by a call waiting tone.  
To answer a call while you have another call in  
progress:  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
2. To switch between the two calls, press the  
Options soft key and select the Swap option.  
3. To end the call on hold, press the Options soft  
key and select the End held call option.  
To end the current call, press the  
The call on hold is continued.  
key.  
Transferring a call  
You can transfer the current call to the call on hold  
if this service is supported by the network, so that  
the callers can talk to each other. You will be  
disconnected from both of them.  
1. During a call, answer or make a call in the  
normal way, and press the Options soft key.  
2. Press the Up or Down key to select the Transfer  
option and press the Select soft key.  
The two people are connected to each other.  
37  
Call functions  
Making a multi-party call  
Multi-party calling is a feature of some networks  
that allows up to six people to take part  
simultaneously in a multi-party or conference call.  
For more information, contact your service provider.  
Setting up the multi-party call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
3. To join the first participant to the multi-party  
call, press the Options soft key and select the  
Join option. Press the Select soft key.  
4. To add a new person to the multi-party call, call  
the person in the normal way. Then press the  
Options soft key and select the Join option.  
Press the Select soft key.  
You can add incoming callers by answering the call  
and selecting the Join option. Repeat as needed.  
Having a second call during a multi-party call  
To answer a call when you have the multi-party call:  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
2. To switch between the two calls, press the  
Options soft key and select the Swap option.  
3. To end the call on hold, press the Options soft  
key and select the End held multiparty option  
or End held call option.  
To end the current call, press the  
The call on hold is continued.  
key.  
38  
Call functions  
To make a call when you have the multi-party call:  
See “To make a call while you have a call in  
progress:” on page 36.  
To answer an incoming call when you have the  
multi-party call in progress and another call on  
hold:  
1. Press the Accept soft key.  
2. Select the End held option to end the call on  
hold.  
Or, select the End current option to end the call  
in progress.  
And then you can answer the new call.  
Having a private conversation with one  
participant  
1. Press the Options soft key and select the Split  
option. Press the Select soft key.  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
Now you can talk privately with that person. The  
other participants can continue to converse with  
each other  
3. To return to the multi-party call, press the  
Options soft key and select the Join option.  
4. Press the Select soft key.  
All of the multi-party call participants can now  
hear each other.  
Removing one participant  
1. Press the Options soft key and select the  
Remove option.  
39  
Call functions  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
The call ends with that participant, but you can  
continue to talk with the other participants.  
3. End the multi-party call by pressing the  
key.  
Using the headset  
With the headset, you can make or answer a call  
without holding the phone.  
When you connect the headset to the jack at the  
right side of the phone, the button on the  
headset works as listed below:  
To  
Press  
redial the last call  
answer a call  
the button twice in idle mode.  
and hold the button when you  
receive the call.  
end a call  
and hold the button when you  
have finished the call.  
Using the plug-in speaker  
With the plug-in speaker, you can hear sounds more  
loudly.  
To use it, connect the plug-in speaker to the jack at  
the right side of the phone.  
40  
Entering text  
At many times while you are using your phone, you  
need to enter text, such as when storing a name in  
Phonebook, writing a new message, creating a  
personal greeting, or scheduling events on your  
calendar.  
You are provided with the following text input  
modes:  
T9 mode*  
This mode allows you to enter words with only  
one keystroke per letter. Each key on the keypad  
has more than one letter – when you press the  
key once, J, K, or L may be displayed. The T9  
mode automatically compares your keystrokes  
5
with an internal linguistic dictionary to determine  
the correct word, thus requiring far fewer  
keystrokes than the traditional ABC mode.  
ABC mode  
This mode allows you to enter letters by pressing  
the key labelled with the required letter once,  
twice, three, or four times until the letter  
displays.  
Number mode  
This mode allows you to enter numbers.  
Symbolic mode  
This mode allows you to enter special characters.  
*
is a registered trademark of Tegic Communications,  
Inc. and is licensed under U.S. Patent 5,818,437/  
5,953,541/ 6,011,554.  
41  
   
Entering text  
Changing the text input mode  
When you are in a field that allows characters to be  
entered, you will see the text input mode indicator  
at the bottom of the display.  
Example: Entering a name in Phonebook  
Enter name  
Text input mode indicator:  
T9 English mode  
20  
OK  
Eng  
To change to another text input mode:  
1. Press the right soft key indicating the current  
text input mode.  
2. Scroll to the mode you want to use by pressing  
the Up or Down key.  
The Language select option allows you to  
change the text input language.  
You can use the Add word option to add new  
words into the T9 dictionary. See page 44.  
Note: If you want to exit the menu without  
changing the mode, press the  
or key  
soft key,  
.
3. Press the Select soft key to confirm the  
highlighted text input mode.  
42  
 
Entering text  
Quickly changing the text input mode  
To switch between the  
Number and previous mode  
Symbol and previous mode  
ABC and T9 mode  
Press and hold the  
key.  
key.  
right soft key.  
Using T9 mode  
To type a word in T9 mode:  
1. Start entering the word by pressing keys  
Press each key only once for each letter.  
2
to  
9.  
Example: To enter “hello” in T9 mode, press the  
, and keys.  
4,  
3,  
5,  
5
6
The word you are typing appears on the display.  
It may change with each key that you press.  
2. Enter the whole word before editing or deleting  
any keystrokes.  
3. If the word is correct, start entering the next  
word. Otherwise, press the  
0
key repeatedly to  
display alternative word choices for the keys  
that you have pressed.  
Example: Both “of” and “me” have the sequence  
of  
6
and  
3. The phone displays the  
most commonly used choice first.  
4. Insert a space between words by pressing the  
key.  
5. Continue entering the next word.  
43  
Entering text  
If Spell appears above the left soft key while you  
are entering text, the word does not exist in the T9  
dictionary. To type words not found in T9 mode,  
change the text input mode to ABC mode, or  
proceed as follows:  
1. Press the Spell soft key, or press the right soft  
key and select the Add word option.  
2. Enter the word you want to add using ABC mode  
(see page 45) and press the OK soft key.  
The word is saved in the T9 dictionary and  
inserted in the input field.  
3. Continue entering other words in T9 mode.  
Smart punctuation  
To enter periods, hyphens, or apostrophes, press  
the  
1
key. T9 mode applies rules of grammar to  
insert the correct punctuation.  
Example: The key is used twice to display two  
1
punctuation marks.  
l
e
t
s
e
a
t
.
Changing the case  
To change the case of the next letter(s) that you  
type, press the key. There are three cases:  
• Lower case (no indicator)  
• Initial capital (  
• Capital lock (  
)
)
44  
 
Entering text  
Inserting a space  
To insert a space between words, press the  
key.  
Entering a number directly  
To enter a number, press and hold the number key.  
Scrolling  
To move the cursor to the left, right, up, or down  
within the text, press the navigation keys.  
Clearing letters and words  
To clear the letter to the left of the cursor, press the  
C
key. You can clear all of the letters on the display  
by pressing and holding the key.  
C
Returning to the previous screen  
When the text input field is cleared, press and hold  
the  
C
key to return to the previous screen.  
Using ABC mode  
When typing in ABC mode, press the key labelled  
with the required letter:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
Example: To display the letter “C, quickly press the  
2
key three times. To display the letter  
“K, press the key twice. This method is  
called Multi-tap typing.  
5
45  
 
Entering text  
Note: The cursor moves to the right when you press a  
different key. When entering the same letter  
twice or a different letter on the same key, just  
press the Right key or wait a few seconds for  
the cursor to move to the right automatically,  
and then enter the next letter.  
Refer to the table for more information about the  
characters available. The characters vary,  
depending on the text input language. You can  
select the language by setting one of the following  
options:  
Language select; see page 42  
Input mode; see page 162  
List of the characters available  
Key  
1
characters in the order displayed  
.
,
-
C
F
?
!
@
:
1
2
A
D
G
J
B
E
H
K
2
3
3
4
I
4
5
L
5
6
M
P
N
O
R
V
Y
6
S
8
Z
7
Q
U
X
7
9
8
T
W
0
9
0
(Capital lock mode in English  
)
46  
Entering text  
Changing the case  
To change the case of the next letter(s) that you  
type, press the key. There are three cases:  
• Lower case (no indicator)  
• Initial capital (  
• Capital lock (  
)
)
Inserting a space  
To insert a space between words, press the  
key.  
Entering a number directly  
To enter a number, press and hold the number key.  
Scrolling  
To move the cursor to the left, right, up, or down  
within the text, press the navigation keys.  
Clearing letters and words  
To clear the letter to the left of the cursor, press the  
C
key. You can clear all of the letters on the display  
by pressing and holding the key.  
C
Returning to the previous screen  
When the text input field is empty, press and hold  
the  
C
key to return to the previous screen.  
47  
Entering text  
Using symbolic mode  
Symbolic mode enables you to enter symbols in  
your text.  
To  
Press the  
display more  
symbols  
Up or Down key.  
enter a symbol  
corresponding number key.  
return to the  
previous text input  
mode with  
OK soft key.  
symbol(s) you have  
entered  
return to the  
soft key.  
previous text input  
mode without  
symbol(s) you have  
entered  
Using number mode  
Number mode enables you to enter numbers in  
your text. Press the keys corresponding to the digits  
you want to enter.  
48  
 
Using the menus  
The phone offers a range of functions that allows  
you to tailor the phone to your needs. These  
functions are arranged in menus and sub-menus.  
Accessing a menu function  
The menus and sub-menus can be accessed by  
pressing the Menu or Phonebook soft key in idle  
mode, then scrolling with the navigation keys.  
1. In idle mode, press the Menu soft key to access  
the main menu or press the Phonebook soft  
key to access the Phonebook menu.  
2. Scroll through the menus using the navigation  
keys. And then press the Select soft key to  
access the main menu.  
3. Find the sub-menu that you wish to use by  
scrolling with the Up or Down key.  
4. Press the Select soft key to access the sub-  
menu.  
If the menu that you have selected contains  
further sub-menus, repeat steps 3 and 4.  
5. Scroll to the option you want to choose with the  
Up or Down key.  
6. Press the Select soft key to choose the setting.  
Note: You can return to the previous menu level by  
pressing the  
soft key.  
You can also access the menus and sub-menus by  
quickly entering the corresponding menu number.  
49  
Using the menus  
Example: Accessing the Voice mail menu.  
1. Press the Menu soft key.  
2. Press the  
3. Press the  
5
5
for Messages  
.
for Voice mail  
.
List of menu functions  
Various menus let you check or change your phone  
settings. The following list shows the menu  
structure.  
The numbers assigned to each menu option may  
not match the menu number on the phone. It  
depends on the services supported by your SIM  
card.  
Phonebook menu  
1. Phonebook (see page 56)  
1. Find name  
2. Add entry  
3. Speed-dial list  
4. Copy all to phone  
5. Send all via infrared  
6. Delete all  
2. Management (see page 66)  
1. Own number  
2. Group setting  
3. Memory status  
3. Services (see page 68)  
1. Service directory  
50  
Using the menus  
Main menu  
*
1. SAT (SIM Application Toolkit) (see  
page 69)  
2. Call records (see page 70)  
1. Missed calls  
2. Received calls  
3. Dialled calls  
4. Delete all  
5. Call time  
1. Last call time  
2. Total sent  
3. Total received  
4. Reset timers  
6. Call costs*  
1. Last call cost  
2. Total cost  
3. Max cost  
4. Reset counters  
5. Set max cost  
6. Price/Unit  
3. Network services (see page 74)  
1. Call diverting  
1. Divert always  
2. Busy  
3. No reply  
4. Unreachable  
5. Cancel all  
2. Call barring  
1. All outgoing  
2. International  
3. International except to home  
4. All incoming  
5. Incoming while abroad  
6. Cancel all  
7. Change barring password  
*Shown only if it is supported by your SIM card.  
51  
Using the menus  
3. Call waiting  
4. Network selection  
5. Caller ID  
6. Band selection  
*
7. Active line  
4. Sound settings (see page 83)  
1. Incoming calls  
1. Default melodies  
2. My sounds  
3. Ring volume  
4. Alert type  
2. Messages  
1. Short messages  
2. Multimedia messages  
3. Power on/off  
4. Connection tone  
5. Key tone  
6. Minute minder  
7. Quiet mode  
8. Slide tone  
9. Alerts on call  
5. Messages (see page 88)  
1. Short messages  
1. Create  
2. Inbox  
3. Outbox  
4. Delete all  
2. Multimedia messages  
1. Create  
2. Inbox  
3. Outbox  
4. Draft  
5. My folder  
6. Delete all  
*Shown only if it is supported by your SIM card  
52  
Using the menus  
3. Push messages  
1. Inbox  
2. Setting  
3. Delete all  
4. Preset messages  
5. Voice mail  
1. Connect to voice mail  
2. Voice server number  
6. Broadcast  
1. Read  
2. Receive  
3. Channel  
4. Language  
7. Settings  
1. Short messages  
2. Multimedia messages  
8. Memory status  
1. Short messages  
2. Multimedia messages  
6. Fun box (see page 115)  
*
1. WWW services  
1. Home  
2. Bookmark  
3. Go to URL  
4. Clear cache  
5. Proxy settings  
6. Current proxy  
2. Media box  
1. Photos  
2. Images  
3. Sounds  
4. Delete all  
5. Memory status  
3. JAVA world  
1. Downloads  
* May not be shown or supported by your network service  
provider.  
53  
Using the menus  
2. Internet settings  
3. Memory status  
4. Melody composer  
1. Compose melody  
2. Memory status  
7. Organiser (see page 134)  
1. New memo  
2. Calendar  
3. To do list  
4. Clock  
1. Set time  
2. Set date  
3. Set world time  
4. Set format  
5. Alarm  
6. Voice recorder  
1. Record  
2. Voices  
3. Delete all  
4. Settings  
5. Memory status  
7. Calculator  
8. Conversion  
1. Currency  
2. Length  
3. Weight  
4. Volume  
5. Area  
6. Temperature  
9. Timer  
10. Stopwatch  
8. Camera (see page 151)  
1. Take photos  
2. My photos  
3. My albums  
4. Delete all  
5. Settings  
6. Memory status  
54  
Using the menus  
9. Phone settings (see page 160)  
1. Display  
1. Wallpaper  
2. Skin  
3. Backlight  
4. LCD brightness  
2. Greeting message  
3. Language  
1. Text language  
2. Input mode  
4. Security  
1. PIN check  
2. Change PIN  
3. Phone lock  
4. Change password  
5. Privacy  
6. SIM lock  
7. FDN mode  
*
8. Change PIN2*  
5. Auto redial  
6. Voiceclarity  
7. Slide settings  
1. Up  
2. Down  
8. Anykey answer  
9. Infrared activation  
10. Reset settings  
1. Sound settings  
2. Phone settings  
3. All settings  
* Shown only if it is supported by your SIM card.  
55  
Phonebook menu  
The Phonebook offers the following features:  
Phonebook: allows you to find, create, or set up  
the speed-dialling feature and manage  
Phonebook entries.  
Management: allows you to create or remove  
your own number, set up caller groups and check  
the memory status.  
Services: allows you to use the service directory  
depending on your SIM card.  
Find name  
To search for a number in your Phonebook, proceed  
as follows.  
1. Enter a letter(s) of the name that you want to  
find.  
The Phonebook entries are listed, highlighting  
the entry matching your input.  
2. If necessary, press the Up or Down key to scroll  
to the entry you want.  
3. Once you have found the entry, press the OK  
soft key.  
4.  
To  
Press the  
key  
dial the displayed  
number  
.
change the  
Phonebook entries  
Options soft key. For  
further details, see  
page 57.  
56  
   
Phonebook menu  
Changing the phone memory entries  
Scroll to the category that you want to edit by  
pressing the Left or Right key. The following  
categories are available and you can edit  
information for each category by pressing the  
Options soft key.  
Category Then  
Mobile  
Home  
Office  
Fax  
Select one of the following options. For  
details for these options, refer to the  
page 58.  
Edit number  
Change name  
Other  
Send message (shown if the category  
contains a number)  
Copy (shown if the category contains a  
number)  
Send via infrared (shown if the  
category contains a number)  
Delete entry  
E-Mail  
Note  
Enter or edit e-mail address.  
Enter or edit the memo.  
Group  
Graphic  
Alert  
Set one of the groups or no group.  
Set one of the images or no image.  
Set one of the melodies or not  
assigned.  
57  
 
Phonebook menu  
Changing the SIM memory entries  
To change the SIM memory entry’s information,  
press the Options soft key.  
The following options are available:  
Edit number  
This option allows you to change the number. You  
can also add a new number if none has been stored  
for the selected category.  
Change name  
This option allows you to change the name of the  
entry.  
To clear the old name, press the  
C
key. For more  
information about how to enter characters, see  
page 41.  
Send message  
This option allows you to send a message to the  
number. For more information about how to send a  
message, see page 90.  
Copy  
This option allows you to copy the entry from the  
phone’s memory to the SIM card, or vice versa.  
Send via infrared  
This option allows you to copy the entry from your  
phone to another device that has the IrDA port via  
infrared.  
Delete entry  
This option allows you to delete the entry from your  
Phonebook. To confirm the deletion, press the Yes  
soft key. Otherwise, press the No soft key.  
58  
 
Phonebook menu  
Add entry  
You can store phone numbers and the  
corresponding names in the memory of your SIM  
card. In addition, you can store up to 1000 names  
in the phone memory and each name can be  
associated with up to five numbers.  
1. Enter the number you want to save.  
Notes  
:
• If you make a mistake while entering a number,  
correct it using the  
page 27.  
C
key. For further details, see  
To insert a dialling pause for special phone  
services, such as banking by phone, hold down  
the  
key. P” is displayed to indicate the pause.  
2. When you are sure that the number is correct,  
press the Save soft key.  
3. Select the memory where the number is to be  
stored, either Phone or SIM, and press the  
Select soft key.  
Note: If you change phones, any numbers stored  
in your SIM card will automatically be  
available with the new phone, whereas any  
numbers stored in the phone’s memory  
must be stored again.  
4. If you select SIM in step 3, go to step 5.  
If you select Phone in step 3, choose a number  
type using the Up or Down key and press the  
Select soft key.  
5. Enter the associated name.  
For more information about how to enter  
characters, see page 41.  
59  
 
Phonebook menu  
6. When you are satisfied, press the OK soft key.  
7. If you select Phone in step 3, go to step 8.  
If you select SIM in step 3, enter the location  
number and press the OK soft key.  
8. If you want to change the entry, use the options.  
for more information on how to do this, see  
page 57.  
If you want to return to idle mode, press the  
soft key, or the  
key.  
Storing a number in idle mode  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in Phonebook.  
Continue the procedure from step 1 on page 59 to  
store the number.  
Speed-dial list  
You can set up to eight speed-dial entries and then  
dial them easily whenever you want, simply by  
pressing the associated number key.  
Setting up speed-dial entries  
1. Press the Up or Down key to scroll to an empty  
location and press the Select soft key.  
2. When the Edit number option highlights, press  
the Select soft key.  
3. Enter a phone number and press the OK soft  
key. Or,  
60  
 
Phonebook menu  
To retrieve a number from your Phonebook,  
press the Phonebook soft key. Select an entry  
from the list and press the OK soft key. Press  
the OK soft key to save it.  
4. When you have finished, press the  
or the key to exit.  
soft key,  
Editing the speed-dial entries  
1. Select the speed-dial entry you want to edit  
from the list and press the Select soft key.  
2. Select one of the following menu options by  
pressing the Up or Down key and press the  
Select soft key:  
Edit number: allows you to change the  
number.  
Change name: allows you to change the  
name of the entry.  
Delete: allows you to clear the setting so that  
no number is assigned to the key.  
3. When you have finished, press the  
the key to exit.  
soft key or  
Using the speed-dial feature  
When the idle screen is displayed, press the number  
key,  
press the  
number key.  
2
to  
9
, assigned to the speed-dial entry and  
key. You can also press and hold the  
Note: The  
1
key is reserved for your voice mail server  
number.  
61  
Phonebook menu  
Dialling a number stored in the SIM card  
Once you have stored phone numbers in your SIM  
card, you can dial them easily whenever required.  
To dial a number stored in the SIM card:  
1. Enter the number of the SIM card location where  
the number you want to dial is stored.  
2. Press the  
key.  
The display shows the name and number stored  
in that location.  
3. Press the Dial soft key or the  
key.  
Copy all to phone  
You can copy all of the numbers stored in the SIM  
card to the phone’s memory.  
1. When a confirming message appears, press the  
Yes soft key to copy.  
The numbers in the SIM card are copied to the  
phone’s memory, labelled with Mobile by  
default.  
Otherwise, press the No soft key.  
2. When you have finished, press the  
the key to exit.  
soft key or  
62  
Phonebook menu  
Send all via infrared  
Via the infrared connection, you can send your  
Phonebook entries to another IrDA- compliant  
devices and vice versa.  
Note: This feature may not be available depending on  
the devices.  
Sending your phonebook entries  
1. Align the IrDA ports on both sides.  
2. Access the Send all via infrared menu option  
in the Phonebook menu and choose one of the  
following options and press the Select soft key:  
All: allows you to send all of the entries, from  
the entry you choose to the end of the SIM  
card and phone list.  
SIM: allows you to send all of the entries,  
from the entry you choose to the end of the  
SIM card list.  
Phone: allows you to send all of the entries,  
from the entry you choose to the end of the  
phone list.  
3. When you select All and press the OK soft key,  
your phone displays all of the Phonebook  
entries.  
When you select SIM or Phone and press the  
OK soft key, all of the entries stored in the  
corresponding memory location are listed.  
4. Scroll to the entry you want to send first and  
press the OK soft key.  
Your phone will begin sending the entry(ies).  
63  
Phonebook menu  
IrDA port  
Receiving phonebook entries from another  
device  
1. Align the IrDA ports on both sides.  
2. Access the Infrared activation menu (see  
page 168) and select On to activate the port.  
3. When your phone receives Phonebook data from  
another device:  
If the other person sends you one entry, your  
phone displays the name and the phone number  
and you can specify whether or not you want to  
save it. Continue to step 4.  
If the person sends you the entries by All SIM,  
,
or Phone, you can select a memory location,  
SIM card or phone’s memory. Continue to step  
5.  
4. Press the Save soft key to store the entry.  
You can also discard the entry by pressing the  
Cancel soft key.  
5. Press the SIM or Phone soft key.  
The entries will be saved in the appropriate  
memory.  
64  
Phonebook menu  
Delete all  
You can delete Phonebook entries selectively  
depending on the memory location, or all entries at  
once.  
1. Scroll to a desired memory selection and place a  
check mark next to it by pressing the Select  
soft key.  
Selecting All places check marks on all of the  
memories.  
2. If necessary, repeat step 1 to check another  
options.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the entries in the  
memory(ies). Then enter the phone password  
and press the OK soft key.  
The password is preset to “00000000” by  
default. To change it, see page 164.  
Otherwise, press the No soft key.  
65  
Phonebook menu  
Own number  
To store your own phone number(s) with a name:  
1. Scroll to an empty location by pressing the Up or  
Down key and press the Select soft key.  
2. When Edit number highlights, press the Select  
soft key.  
3. Enter your number and press the OK soft key.  
4. To assign a name, press the Down key to move  
to Change name and press the Select soft key.  
5. Enter a name and press the OK soft key.  
6. When you have finished, press the  
the key to exit.  
soft key or  
To remove one of your numbers:  
1. Select the entry you want to delete from the  
Own number list and press the Select soft key.  
2. Scroll to Delete by pressing the Up or Down key  
and press the Select soft key.  
3. When a confirming message appears, press the  
Yes soft key to delete the number.  
Otherwise, press the No soft key.  
4. When you have finished, press the  
the key to exit.  
soft key or  
66  
   
Phonebook menu  
Group setting  
You can change the settings of the ten predefined  
caller groups.  
1. Select a caller group by pressing the Up or Down  
key and press the Select soft key.  
2. Scroll to a setting option by pressing the Up or  
Down key and press the Select soft key.  
The following options are available:  
Melody: allows you to select a melody to  
sound when a call comes in from a member in  
the group.  
Change name: allows you to change the  
name of the group; for further details about  
how to enter characters, see page 41.  
View image: shows the image to be displayed  
when a call comes in from a member in the  
group.  
3. Change the setting as required and press the  
Select soft key.  
4. Repeat steps 2 and 3 to change other options.  
When you have finished, press the  
the key to exit.  
soft key or  
67  
Phonebook menu  
Memory status  
You can check how many names are stored in SIM  
card and phone’s memory.  
When you have finished checking, press the  
key or the key to exit.  
soft  
Service directory  
Note: This feature may not be available depending on  
your SIM card.  
The display shows the list of the numbers in the  
Service directory.  
If necessary, scroll to a number by pressing the Up  
or Down key and press the  
number.  
key to dial the  
68  
 
SAT (SIM Application  
Toolkit)  
If you use a SAT card that provides additional  
services, the SAT menu displays. For further details,  
see your SIM card instructions.  
This menu is shown only if it is supported by your  
SIM card.  
69  
 
Call records  
Via this menu, you can view:  
• calls you have missed, received, or dialled.  
• the cost of your calls.  
• the length of your calls.  
Note: You can access the numbers in the three types  
of call records by pressing the  
mode.  
key in idle  
Missed calls  
This option lets you view the last 20 unanswered  
calls if the caller line identification is available.  
The number, or name if available, displays together  
with the date and time when the call was missed.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all of the calls.  
• paste the number into Phonebook.  
Received calls  
This option lets you view the last 20 received calls if  
the caller line identification is available.  
The number, or name if available, displays together  
with the date and time when the call was received.  
70  
     
Call records  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all of the calls.  
• paste the number into Phonebook.  
Dialled calls  
This option lets you view the last 20 dialled  
numbers.  
The number, or name if available, displays together  
with the date and time when the call was made.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all the calls.  
• paste the number into Phonebook.  
Delete all  
You can delete all of the numbers stored in each call  
record.  
When a confirming message appears, press the Yes  
soft key to confirm.  
Otherwise, press the No soft key.  
71  
 
Call records  
Call time  
This option lets you view the timers for calls made  
and received.  
Notes:  
• If your SIM card supports the ALS (Alternate Line  
Service) feature, you must first select the  
appropriate line.  
• The actual time invoiced for calls by your service  
provider may vary, depending on network features,  
rounding-off for billing purposes and others.  
The following timers are available:  
Last call time: the length of the last call.  
Total sent: the total length of all calls made since  
the timer was last reset.  
Total received: the total length of all calls received  
since the timer was last reset.  
Reset timers: the option used to reset the call  
timers. You need to enter the phone password and  
then press the OK soft key.  
Call costs  
This feature lets you view the cost of calls.  
Notes  
:
• This feature is not intended to be used for billing  
purposes.  
• AOC (Advice Of Charge) information may display in  
idle mode, depending on your SIM card or service  
provider.  
72  
 
Call records  
The following options are available:  
Last call cost: cost of the last call made.  
Total cost: total cost of all calls made since the  
cost counter was last reset. If the total cost exceeds  
the maximum cost set via the Set max cost  
option, you cannot make any calls until you reset  
the counter.  
Max cost: maximum cost set via the Set max cost  
option.  
Reset counters: option used to reset the cost  
counter; you must first enter your PIN2 (see  
page 175) and then press the OK soft key.  
Set max cost: option used to enter the maximum  
cost that you authorise for your calls; you must first  
enter your PIN2 (see page 175) and then press the  
OK soft key.  
Price/Unit: option used to set the cost of one unit;  
this price per unit is applied when calculating the  
cost of your calls; you must first enter your PIN2  
(see page 175) and then press the OK soft key.  
73  
Network services  
These menu functions are network services.  
Please contact your service provider to check their  
availability and subscribe to them, if you wish.  
Call diverting  
Note: The call divert options may be different  
depending on your SIM card and those not  
supported by your network operator may not  
be shown.  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
Call diverting can be set up in the following ways:  
Divert always: all calls are diverted.  
Busy: calls are diverted if your phone is engaged  
on another call.  
No reply: calls are diverted if you do not answer  
the phone.  
Unreachable: calls are diverted if you are not in an  
area covered by your service provider.  
Cancel all: all call diverting options are  
deactivated.  
You can specify individual call diverting options for  
each of the following call types:  
• Voice calls only  
• Data calls only (not available when line 2 is in  
use)  
74  
   
Network services  
Example: You can divert voice calls to your  
colleague if you are already using the  
phone.  
Setting call diverting options  
1. Select the type of call diverting by pressing the  
Up or Down key and then press the Select soft  
key.  
2. Select the type of calls to be diverted by  
pressing the Up or Down key and then press the  
Select soft key.  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter the number to which the calls are to be  
diverted.  
To enter an international code, hold down the  
key until the + sign is displayed.  
0
You can also select a number in your Phonebook  
or the voice mail server number, by pressing the  
Options soft key, followed by Phonebook or  
Voice server  
.
5. When you are satisfied, press the OK soft key.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
75  
Network services  
Deactivating specific call diverting  
options  
1. Select the call diverting option to be  
deactivated.  
2. Select the type of calls to which this option  
applies.  
3. Press the Remove soft key.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
You can also deactivate all call diverting options by  
selecting the Cancel all option.  
Call barring  
The call barring network service allows you to  
restrict your calls.  
Call barring can be set up in the following ways:  
All outgoing: calls cannot be made.  
International: international calls cannot be made.  
International except to home: when abroad,  
calls can be made only to numbers within the  
current country and to your home country, that is  
the country where your home network provider is  
located.  
All incoming: calls cannot be received.  
Incoming while abroad: calls cannot be received  
when you are using your phone outside your home  
service area.  
76  
Network services  
Cancel all: all call barring options are deactivated;  
calls can be made and received normally.  
Change barring password: allows you to change  
the barring password.  
You can specify individual call barring options for  
each of the following call types:  
• Voice calls only  
• Data calls only (not available when line 2 is in  
use)  
Setting call barring options  
1. Select the type of call barring by pressing the Up  
or Down key and then press the Select soft key.  
2. Select the type of calls to be barred by pressing  
the Up or Down key and then press the Select  
soft key.  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter your call barring password supplied by  
your service provider and press the OK soft key.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
77  
Network services  
Deactivating specific call barring options  
1. Select the call barring option to be deactivated.  
2. Select the type of calls to which this option  
applies.  
3. Press the Deactivate soft key.  
4. Enter your call barring password supplied by  
your service provider.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
You can also deactivate all call barring options by  
selecting the Cancel all option.  
Changing the barring password  
You can set and change the call barring password  
obtained from your service provider.  
1. Select Change barring password from the  
Call barring screen, and press the Select soft  
key.  
2. Enter the current password and press the OK  
soft key.  
3. Enter a new password and press the OK soft  
key.  
4. Enter the new password again to confirm it and  
press the OK soft key.  
78  
 
Network services  
Call waiting  
This network service informs you when someone is  
trying to reach you during another call.  
You can specify individual call waiting options for  
each of the following call types:  
• Voice calls only  
• Data calls only (not available when line 2 is in  
use)  
Activating the call waiting feature  
1. Select the type of calls to which the call waiting  
option is to be applied by pressing the Up or  
Down key and then press the Select soft key.  
2. Press the Activate soft key to confirm your  
settings.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
Deactivating specific call waiting options  
1. Select the type of call to which the option  
applies.  
2. Press the Deactivate soft key.  
The phone will send your settings to the network  
and display the network’s acknowledgement.  
You can also deactivate all call waiting options by  
selecting the Cancel all option.  
79  
 
Network services  
Network selection  
The Network selection feature enables you to  
automatically or manually select the network used  
when roaming outside your home area.  
Note: You can select a network other than your home  
network only if it has a valid roaming  
agreement with your home network.  
You may automatically or manually select a network  
when roaming. To do so:  
1. Press the Up or Down key until the appropriate  
option highlights and press the Select soft key.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, the phone scans for the  
available networks. Go to step 2.  
2. Press the Up or Down key until the preferred  
network highlights and press the Select soft  
key.  
You will now be connected to that network when  
roaming.  
80  
Network services  
Caller ID  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow the user to change  
this setting.  
The following options are available:  
Default: the default setting provided by the  
network is used.  
Hide number: your number does not display on  
the other person’s phone.  
Send number: your number is sent each time you  
make a call.  
Band selection  
For the phone to make and receive phone calls, it  
must register with one of the available networks.  
Your phone can handle any of the following types of  
network:  
• GSM 900  
• GSM 1800  
• Combined GSM 900/1800  
• GSM 1900  
The country where you purchased your phone  
determines the default band that it uses. When you  
travel abroad, you must remember to change to an  
appropriate band.  
81  
Network services  
1. When Band selection displays, press the  
Select soft key.  
2. Press the Up or Down key until the appropriate  
option (GSM 900/1800, GSM 1900, or Triple  
band) highlights and press the Select soft key.  
When you select a new band, your phone displays a  
confirmation message and then automatically  
searches for all of the available networks. Your  
phone registers with a preferred network within the  
selected band.  
Active line  
Some SIM cards may be used with two subscriber  
numbers. This functions is available only if your SIM  
card supports it.  
This menu option allows you to select the line to be  
used to make calls. However, calls can be answered  
on both lines, regardless of the selected line.  
82  
 
Sound settings  
You can use the Sound settings feature to  
customise various settings, such as the:  
• ringtone, volume and type for incoming calls or  
messages.  
• sounds made when your call is connected or  
when you press a key.  
• quiet mode which your phone switches to when  
you hold down the  
key in the idle mode.  
Incoming calls  
This option allows you to set up the ringer for  
incoming calls.  
Notes:If your SIM card supports the ALS (Alternate  
Line Service) feature, you must select the line  
you wish to change first.  
The following options are available:  
Select a melody from the list to be played each time  
you receive an incoming call.  
Default melodies: allows you to select one of the  
predefined melodies.  
My sounds: allows you to select one of the sounds  
received from other sources, such as the WAP sites,  
the EasyStudio PC software, or multimedia  
messages.  
83  
   
Sound settings  
Ring volume: allows you to adjust the ring  
volume. Use the Up and Down keys or the volume  
keys on the left side of the phone. The more bars  
you see, the louder the volume.  
Alert type: lets you specify how you are informed  
of any incoming calls.  
Melody: the phone rings using the melody selected  
via the Default melodies and My sounds option.  
Vibration: the phone vibrates but does not ring.  
Vibration then melody: the phone first vibrates and  
then plays the melody selected via the Default  
melodies and My sounds option.  
Messages  
This option allows you to set up the ringer for each  
incoming short message and multimedia message.  
Short messages /  
Multimedia messages  
The following options are available:  
Tone: lets you choose from many different tones.  
Select a tone from the list to be played each time  
you receive a message.  
Alert type: lets you specify how you are informed  
of any incoming messages.  
Silent: only the text notification appears; the phone  
neither rings nor vibrates.  
Tone: the phone rings using the tone selected via  
the Tone option. See above.  
84  
   
Sound settings  
Vibration: the phone vibrates but does not ring.  
Vibration then tone: the phone first vibrates and  
then plays the tone selected via the Tone option.  
Repetition: allows you to specify how often the  
phone informs you of a new message. You can  
choose either Once or Periodic  
.
Power on/off  
This option allows you to select the melody that the  
phone sounds when you switch it on or off.  
You can choose either Classical or Future. To turn  
the sound off, select Off  
.
Connection tone  
This menu option allows you to specify whether or  
not the phone beeps when the phone connects to  
the network.  
The following options are available:  
Off: the phone does not beep.  
On: the phone beeps when your call is accepted.  
85  
Sound settings  
Key tone  
This menu option allows you to select the tone that  
the keypad sounds when you press a key.  
To turn the sound off, select Off  
.
To adjust the key tone volume, press the volume  
keys on the left side of the phone in idle mode.  
Minute minder  
This menu option allows you to specify whether or  
not the phone beeps every minute during a call to  
keep you informed of the length of your call.  
The following options are available:  
Off: the phone does not beep.  
On: the phone beeps every minute.  
Quiet mode  
When you hold the  
key down in idle mode, the  
phone switches to the quiet mode. You can specify  
whether the phone vibrates or mutes when in the  
quiet mode.  
The following options are available:  
Vibration: the phone vibrates rather than rings in  
the quiet mode.  
Mute: the phone mutes sounds in the quiet mode.  
86  
Sound settings  
Slide tone  
This menu allows you to select the slide tone that  
the phone emits when you slide the folder up or  
down.  
To turn the sound off, select Off  
.
Alerts on call  
This menu allows you to set the phone to all alerts  
while calling.  
To turn the alerts off, select Off  
.
87  
Messages  
This menu allows you to create, send, read and  
save messages with the Short Message Service  
(SMS: text message), Enhanced Message Service  
(EMS: message including simple image, animation  
or melody) and Multimedia Message Service  
(MMS: message supporting the presentation of  
various media types, such as full colour images and  
polyphonic ring tones). Voice mails are also  
available.  
Note: This feature is only available if your service  
provider’s network supports it. Contact your  
service provider for more information.  
Short messages  
Short message service (SMS) allows you to send  
and receive short text messages to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to make short messages  
consisting of simple pictures, melodies, animations  
and styled text all of which adds a new dimension to  
simple text messages.  
To send text messages by phone, you must obtain  
the number of the SMS centre from your service  
provider.  
Receiving a new message  
When you receive a new message, the New  
message icon (  
) and a text notification showing  
the number of the message appear on the display.  
You also hear an alert, depending on the message  
sound setting; for further details, see page 84.  
88  
   
Messages  
To read the new message(s) immediately, press the  
View soft key. A list of the messages will appear.  
Note: To clear the new message notification on the  
display, press the  
key. When you also have  
missed calls, voice mails, short messages or  
multimedia messages, and multi CBs, the right  
soft key indication changes in the following  
order: Missed  
,
Connect, View, CB and  
Phonebook  
.
Managing memory  
Inbox and Outbox share a given amount of memory  
in your phone or SIM card. When the message  
memory is full, the New message icon (  
and an error message displays. (It disappears when  
you press the key, but it reappears if you don’t  
) blinks  
delete old messages.) In this case, you cannot  
receive any new messages. You must delete one or  
more old messages to free up memory for new  
messages. Use the Delete option within the Inbox or  
Outbox or the Delete all option; for further details,  
see page 94.  
Create  
Using this menu, you can write messages, containing  
text, images and melodies.  
1. Create a message.  
On the first line of the display, you see the  
number of remaining characters you can enter,  
the number of current message and the  
maximum messages you can create, and the font  
style you set in Text option.  
Note: For further information about how to enter  
characters, see page 41.  
89  
Messages  
2. While entering your message, press the  
Options soft key to use the following options.  
Send: allows you to send the message. Refer  
to the next step.  
Text: allows you to format the text. Following  
text attributes can all be combined as  
required.  
Text size: Small/Medium/Large  
Text mode: Normal/Underscore/Strikethrough  
Bold: Off/On  
Italic: Off/On  
Alignment: Left/Center/Right  
Add media: allows you to add pictures,  
animations and/or melodies to the message.  
Select a category; Add picture Add  
,
animation, or Add melody. You can then  
choose a factory-set object or an object that  
you have received from another source and  
stored in the Media box. See page 121.  
Preset messages: allows you to add a preset  
message to your text. Select one of nine  
messages stored in the Preset messages  
menu option. See page 107.  
Save message: allows you to save the  
message so that it can be sent later. You can  
read the message in the Outbox.  
3. When you have finished entering your message,  
choose Send from the options.  
4. Enter a destination number on the Address  
screen.  
You can search for a number in Phonebook by  
pressing the Phonebook soft key.  
90  
   
Messages  
Note: To clear all of your input, press or press and  
hold the key. When you have not entered any  
text, pressing and holding the key will return  
C
C
the display to the previous screen.  
To send the message to multiple destinations up  
to 5, press the Add soft key and repeat step 4.  
5. When you have finished entering the numbers,  
press the OK soft key.  
6. If the Enter centre screen displays, enter the  
service number and press the OK soft key.  
You can store the SMS service centre number. For  
details, see page 110.  
Note: When the phone fails to send the message;  
Press the Retry soft key to try the  
transmission again. Or, press the No soft key  
and the Save soft key to save the message or  
exit the menu by pressing the No soft key.  
Inbox  
Your phone receives incoming messages and saves  
them in the Inbox. SMS is usually saved in the SIM  
card, but if the SIM memory is full, the incoming  
messages will be saved in the phone’s memory.  
When the Inbox menu is selected, the list of  
messages received displays with the:  
• sender’s phone number, or name if stored in  
Phonebook.  
• message status;  
message to read, or  
message.  
for a read message,  
for an incomplete  
for a  
91  
Messages  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
• date and time when the message was received.  
• memory where the message was stored;  
for  
the SIM card, or  
for the phone’s memory.  
• message contents.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
To scroll through the message contents, press the  
Up or Down key. When you focus on an object that  
includes a melody, the melody is played.  
You can choose the following options by pressing  
the Options soft key:  
Delete: allows you to delete the message.  
Message reply: allows you to reply by sending a  
message.  
Call back: allows you to call the sender back.  
Cut address: extracts phone numbers, email  
addresses, or URL addresses in the text, so that you  
can call the number or send a message to the  
number, or save it in your Phonebook.  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
Extract media: you can save media (except the  
predefined EMS animations and sounds) from the  
message into Media box. You can use these items  
when writing a message; for further details, see  
page 90.  
92  
Messages  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory or vice versa.  
Outbox  
Outbox stores any messages that you have already  
sent or just saved without sending.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
• recipient’s phone number, or name if stored in  
Phonebook.  
• message status;  
a message to send.  
for a sent message or  
for  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
• message status;  
a message to send.  
for a sent message or  
for  
for  
• memory where the message was stored;  
the SIM card or  
for the phone’s memory.  
• message contents.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
To scroll through the message, press the Up or  
Down key.  
You can choose the following options by pressing  
the Options soft key:  
Delete: allows you to delete the message.  
Cut address: extracts phone numbers, email  
addresses, or URL addresses in the text, so that you  
can call the number or send a message to the  
number, or save it in your Phonebook.  
93  
Messages  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory or vice versa.  
Delete all  
You can delete all messages stored in the SIM card  
and phone’s memory in this menu.  
1. Scroll to a message box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
message boxes.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
box(es).  
Otherwise, press the No soft key.  
94  
 
Messages  
Multimedia messages  
Multimedia message service (MMS) is a messaging  
service very similar to Short message service  
(SMS). It provides asynchronous delivery of  
personal multimedia messages from between phone  
and phone, phone and e-mail, phone and web(by  
URL).  
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice and sounds. An MMS  
message is a multimedia presentation in a single  
entry. It is not a text file with attachments.  
Using the MMS feature, your phone can receive  
multimedia messages. You can also send picture  
messages. This function is available only if it is  
supported by your service provider. Only phones  
that offer picture message features can receive and  
display picture messages.  
Retrieving a new message  
When you are retrieving a message, the Retrieving  
icon (  
retrieving a new message, the New message icon  
) and a text notification showing the number of  
) appears on the display. When you finish  
(
the message appear on the display. You also hear  
an alert, depending on the message sound setting;  
for further details, see page 84.  
To read the new message in idle mode, press the  
View soft key. And then you see the list in the  
Inbox. If you select a message, you can read it.  
95  
 
Messages  
Notes  
:
• while retrieving a new message, you cannot access  
WAP sites, and cannot also enter the Downloads  
menu (see page 125).  
To clear the new message notification on the display,  
press the  
key. When you also have missed  
calls, voice mails, short messages, or multimedia  
messages, and multi CBs, the right soft key  
indication changes in the following order: Missed  
,
Connect  
,
View, CB and Phonebook.  
If Message reception was set to Manual (for  
details, see page 112), when the New message icon  
) appears on the display, you have to retrieve  
messages in the Inbox. You select a message with  
the icon such as and in the Inbox. Then  
(
,
you can select retrieve or delete message by  
pressing the Opt. soft key.  
Managing memory  
When the memory is full, the New message icon  
(
) blinks and an error message displays. (It  
disappears when you press the key, but it  
reappears if you don’t delete old messages.) In this  
case, you cannot receive any new messages. You  
must delete one or more messages to free up  
memory for new messages. Use the Delete option  
within the Inbox, Outbox, Draft, or My folder, or the  
Delete all option; for further details, see page 106.  
96  
Messages  
Notes  
:
• You can only receive up to 150 messages.  
• Multimedia message boxes, Camera, and Media box  
share a given amount of memory in your phone. You  
can also use the Delete or Delete all option to  
delete some sounds or images in the Camera or  
Media box.  
Create  
This menu option allows you to create a new  
multimedia message and then send it to multiple  
destinations.  
1. Select one of the following items using the Up or  
Down key and press the Add soft key.  
Item  
How to add  
Subject 1. Enter a subject for your message.  
For details about entering  
characters, see page 41.  
2. Press the OK soft key.  
Note: To return to previous screen while  
entering a subject, press and hold  
the  
C
key.  
Picture  
To add a new picture;  
1. Select the Create new option.  
2. Take a photo using the camera  
feature. For details about the  
camera feature, see page 151.  
97  
Messages  
Item  
How to add  
Picture  
(continued)  
3. Select one of the pictures you want  
to add. The picture is displayed.  
4. Press the Add soft key.  
To add a picture in the Media box;  
1. Select one of the picture categories.  
The picture list of the category is  
displayed.  
2. Select one of pictures you want to  
add. The picture is displayed.  
3. Press the Add soft key.  
Sound  
To add a new sound;  
1. Select the Record new option.  
2. Press the Record soft key to start  
recording.  
3. Press the Stop soft key to stop  
recording.  
4. Press the Play soft key to replay the  
sound. Or, press the Add soft key to  
add it. Enter the sound’s name and  
press the OK soft key. The sound is  
added to the message and saved in  
Media box automatically.  
98  
Messages  
Item  
How to add  
Sound  
(continued)  
To add a sound in the Media box;  
1. Select one of the sound categories.  
The sound list of the category is  
displayed.  
2. Select one of the sounds you want  
to add.  
3. Press the Select soft key to add it.  
Message  
1. Enter a new message. Or you can  
enter a preset message.  
To enter a preset message;  
• Press the Opt. soft key and select  
the Preset messages  
.
• Select one of the preset  
messages.  
2. Press the Opt. soft key and select  
the Done option to add the  
message.  
Note: To return to previous screen while  
entering a subject, press and hold  
the  
C
key.  
2. Press the Opt. soft key to use the following  
options.  
Preview: shows your message as it will  
display on the recipient’s phone. To go back to  
the message screen, press the Edit soft key.  
To send the message, press the Send soft key  
and go to step 4.  
Send: allows you to send the message to  
another person. Refer to the next steps.  
99  
Messages  
Add page: allows you to add up to 10 pages.  
You can move to each page using the Left or  
Right key on the message screen.  
Page timing: allows you to set how long one  
page of the received messages displays. After  
the specified time, the display automatically  
scrolls to the next page.  
Text effect: allows you to set the colour, size  
and style of the message text.  
Clear subject/picture/sound/message:  
allows you to delete the subject, image,  
sound, or message by selected work.  
Delete page: allows you to delete the current  
page.  
Save message: saves the message in Draft  
(see page 104) or My folder (see page 105).  
Note: To go back to the edit screen, press the  
soft key or the key.  
C
3. When you have finished creating the message,  
select Send from the options.  
4. Select an entry on the Send screen.  
If it is an empty entry, enter a destination as  
below.  
Number: to enter a destination number.  
Email: to enter an e-mail address.  
Phonebook: to enter a destination from  
Phonebook.  
After entering a destination, press the OK soft  
key.  
100  
Messages  
If it is not an empty entry, do the following  
things.  
Edit address: to edit the selected address.  
Delete address: to delete the selected address.  
Note: To clear all of your input, press, or press and  
hold the  
text, pressing and holding the  
C
key. When you have not entered any  
key will return  
C
the display to the previous screen.  
5. To send the message to up to 20 destinations,  
repeat step 4.  
6. When you have finished entering the  
destinations, press the Send soft key.  
If you want to cancel sending your message or  
resend the message that you have failed to send,  
go to the Outbox. Then select the message and  
the option you want. For further details, see page  
103.  
Inbox  
Your phone receives incoming messages and saves  
them in the Inbox.  
When the Inbox menu is selected, the list of  
messages you have received displays with the:  
• message’s subject or No subject if the message  
has no subject.  
• sender’s phone number, or name if stored in  
Phonebook.  
• message status;  
for a read message,  
read, for a read notification message and  
for a notification message to read.  
for a retrieving message,  
for a message to  
101  
Messages  
Note: The message status icon can have many  
forms, such as reflecting the  
,
,
priority that the sender assigned (see  
page 111).  
To view a message without retrieving, scroll to it  
and press the Select soft key.  
To scroll through the message contents, press the  
Up or Down key. When the message has more than  
one page, you can press the Left or Right key to  
move through the pages or a predefined page timer  
will move through the message automatically.  
Notes  
:
• It may be impossible to display or play some pictures  
or sounds.  
• When the message has an attachment like video  
clips, the Attachment icon (  
) appears on the title  
line. You may not play the attachment. And you may  
also not extract it from the message.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message  
Replay: replays the message.  
Reply: replies to the sender by sending a message.  
Forward: forwards the message to another person.  
Call back: allows you to call the sender back.  
Cut media: extracts the picture or sound, so that  
you can set them as a wallpaper, ringtone, or you  
can send them as a multimedia message.  
102  
Messages  
Cut address: extracts phone numbers, email  
addresses, or URL addresses from the text, so that  
you can call the number or send a message to the  
number, or save it in your Phonebook.  
Properties: shows you the detailed information  
about the message.  
Move to My folder: moves the message to the My  
folder for later use.  
Outbox  
Outbox stores messages that you have sent, you  
failed to send and you cancelled sending.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
• message’s subject or No subject if the message  
has no subject.  
• recipient’s phone number, or name if stored in  
Phonebook.  
• message status;  
for a sent message,  
for a sending message,  
for a message that you  
failed to send or you cancelled sending,  
for a  
delivery report. When a receiver retrieves the  
message you have sent and the Delivery report  
option (see page 112) is set to on,  
changed into  
is  
.
To view a message except sending, scroll to it and  
press the Select soft key.  
To cancel sending message, scroll through and  
select the message by pressing the Up or Down key,  
and then press the Select soft key. Then the  
confirming message appears. In the message, you  
can cancel sending it by pressing the Yes soft key.  
103  
 
Messages  
To resend the message that you have failed to send,  
scroll through and select the message by pressing  
the Up or Down key, and then press the Select soft  
key. Then press the Opt. soft key, and then select  
the Send option.  
To scroll through the message, press the Up or  
Down key. When the message has more than one  
page, you can press the Left or Right key to move  
through the pages or the pages are moved through  
as paging timing that sender fixed automatically.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Send: sends the message.  
Properties: shows you the detailed information  
about the message.  
Move to My folder: moves the message to the My  
folder for later use.  
Draft  
This message box stores messages that you save,  
messages interrupted by an incoming call, or  
messages while you create a new message.  
Note: You can save the messages that are failed to  
send in the Outbox.  
To view a message, scroll to it and press the Select  
soft key.  
104  
 
Messages  
You can choose the following options by pressing  
the Opt. soft key:  
Send: sends the message.  
Replay: replays the message.  
Delete: deletes the message.  
Properties: shows you the detailed information  
about the message.  
My folder  
You can move the messages stored in the Inbox or  
Outbox to the My folder by using the Move to My  
folder option. While making a new message, you  
can also save it to My folder by using the Save  
message option.  
To view a message, scroll to it and press the Select  
soft key.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Send: sends the message.  
Cut media: extracts the picture or sound, so that  
you can set them as a wallpaper, or ringtone or you  
can send them as a multimedia message.  
Cut address: extracts phone numbers, email  
addresses, or URL addresses from the text, so that  
you can call the number or send a message to the  
number, or save it in your Phonebook.  
Properties: shows you the detailed information  
about the message.  
105  
 
Messages  
Delete all  
This menu option allows you to delete all of the  
messages in each message box. You can also delete  
all of your messages at one time.  
1. Scroll to a message box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
message boxes.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
box(es).  
Otherwise, press the No soft key.  
Push messages  
This menu allows you to set to receive and read  
push messages.  
The following options are available:  
Inbox: Your phone receives push messages and  
saves them in the Inbox. And you can read push  
messages in the Inbox.  
Setting: This option allows you to set the push  
message receiving options.  
Always: always push message comes in.  
106  
 
Messages  
Never: the push message never comes in.  
Optional: Only the push message whose setting  
matches to the number in this option comes in. The  
preset number is SMS service centre. You can also  
edit the number.  
Delete all: deletes all of the push messages.  
Preset messages  
Using this menu, you can preset up to nine  
messages that you use most frequently. When you  
access this menu, the preset message list displays.  
1. Scroll to a message or an empty entry by  
pressing the Up or Down key.  
2. Press the Select soft key and enter a new  
message or change the old message.  
For further details about entering characters,  
see page 41.  
3. Press the OK soft key to save the message.  
Voice mail  
When you receive a voice mail, your phone displays  
the  
icon and you hear an alert.  
Connect to voice mail  
• In idle mode, when you receive a new voice mail,  
press the Connect soft key to access your voice  
mail server and follow the instructions provided.  
107  
 
Messages  
• In idle mode, hold the  
1
key down to access your  
voice mail server and follow the instructions  
provided.  
• Call your voice mail server number by accessing  
the Connect to voice mail menu and follow the  
instructions provided.  
Voice server number  
Before using the voice mail service, you must store  
the voice mail server number obtained from your  
service provider.  
When you select an entry, the following options are  
available.  
Edit number: enter a voice mail server number or  
press the Phonebook soft key to enter a number  
from Phonebook. And then press the OK soft key.  
Change name: enter a server name and press the  
OK soft key to save it.  
Delete: when the confirming message appears,  
press the Yes soft key. To cancel, press the No soft  
key.  
Broadcast  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Messages are displayed immediately as they  
are received, provided that:  
• the phone is in idle mode.  
• the Receive option is set to On  
.
108  
Messages  
• the message channel is currently active on the  
channel list.  
When you receive a broadcast message, you can  
see the message in idle mode. If it is short you can  
see the display, otherwise, press the CB soft key to  
read the message.  
The following options are available:  
Read: lets you read the received broadcast  
message.  
Archive: shows the list of the messages you have  
saved from the temporary list.  
Temporary: shows the latest messages. These  
messages will be gone when the phone is switched  
off.  
If the message is long, press the UP or Down key.  
When you read a message, press the Options soft  
key to access following options:  
Cut number: shows the list of numbers included in  
the message.  
Save: (Temporary only) saves this message to  
Archive list.  
Delete: deletes this message.  
Delete All: deletes all messages on the list.  
Receive: allows you to turn the reception of  
broadcast messages on or off.  
Channel: the channel is enabled if you place a  
check mark next to All  
.
109  
Messages  
To enable or disable this channel, press the Select  
soft key, then select Enable or Disable  
.
The Add channel option allows you to add a new  
channel to the channel list. Enter the appropriate  
channel code obtained from your service provider  
and a title for the channel.  
Language: selects the language you prefer. Then,  
You can receive cell broadcast messages only in the  
language you selected.  
Settings  
Short messages  
Using this menu, you can set up default SMS  
information. The following options are available:  
Service centre: allows you to store or change the  
number of your SMS centre required when sending  
messages. You must obtain this number from your  
service provider.  
Validity period: allows you to set the length of  
time your messages are stored at the message  
centre while attempts are made to deliver them.  
Message type: allows you to set the message type  
to Text Fax, Voice, ERMES, X400, or E-Mail.  
,
The network can convert the messages into the  
selected format.  
Reply path: allows the recipient of your SMS  
message to send you a reply via your message  
centre, if the service is provided by the network.  
110  
 
Messages  
Delivery report: allows you to set on or off. When  
this function is set to on, the network informs you  
whether or not your message has been delivered.  
Character support: allows you to select the  
character set when editing and sending messages.  
GSM-alphabet: you can only send the message  
using GSM characters.  
Uni-code: you can send the message using Unicode  
characters, including GSM alphabets. The maximum  
number of characters which can be entered in a  
message is reduced to half of that allowed in a GSM  
message.  
Automatic: if you select Automatic, the phone  
selects the character set according to your use of  
Unicode characters.  
Multimedia messages  
Using this menu, you can set up default settings for  
sending or receiving MMS message. The following  
options are available:  
Send settings: The following options are available:  
Priority: allows you to set the priority of message.  
Validity period: allows you to set the length of time  
your messages are stored at the message centre  
while attempts are made to deliver them.  
Delivery after: you can set the delay time before  
the phone sends your messages.  
Address hiding: when this option is set to On, your  
phone number does not display on the recipient’s  
phone.  
111  
 
Messages  
Delivery report: when this option is set to On, the  
network informs you whether or not your message  
has been delivered.  
Read reply: when this option is set to On, your  
recipient’s phone sends a reply to let you know  
when your message was read by her/him.  
Receive settings: the following options are  
available:  
Msg. reception: allows you to set how you receive a  
message. You can select one from Manual  
Automatic, or Reject  
,
.
Anonymous reject: when this option is set to On  
,
your phone rejects messages without a caller ID.  
Adverts reject: when this option is set to On, you  
can reject advertisements by service provider.  
Report allowed: when this option is set to Off, your  
phone does not send a reply to the recipient’s  
phone even if the sender asks for the read reply.  
MMS profiles: in this menu, you can configure  
MMS profile settings that are required when you  
send or receive multimedia messages.  
Current profile: allows you to select one profile to  
use currently.  
Profile setting: allows you to set up five profiles.  
• Profile name: enter the name of the profile.  
• Server URL: enter the address of profile server.  
• GSM setting: allows you to change the proxy  
settings for the GSM network.  
- Gateway: enter the IP address and IP port.  
112  
   
Messages  
- Data call type: select a network connection  
type between ISDN and Analogue.  
- Dial number: enter the server phone  
number.  
- Login ID: enter the server login ID.  
- Password: enter the server password.  
• GPRS setting: allows you to change the proxy  
settings for the GPRS network.  
- Gateway: enter the IP address and IP port.  
- APN: enter the access point name used for  
the address of the GPRS network gateway.  
- Login ID: enter the user ID required to  
connect to a GPRS network.  
- Password: enter the password required to  
connect to the GPRS network.  
• Bearer: select the bearer to be used for each type  
of network accesses.  
- GPRS only: it only works in a GPRS network.  
- GSM only: it only works in a GSM network.  
113  
Messages  
Memory status  
You can check the memory status for messages.  
Short messages  
You can check how many messages are stored in  
the SIM card and the phone’s memory.  
When you have finished checking, press the  
key or the key to exit.  
soft  
Multimedia messages  
Multimedia message boxes, Camera and Media box  
share a given amount of memory in your phone.  
The display shows the status of free and used  
memory.  
You can see the used memory status of multimedia  
message boxes, Camera and Media box by pressing  
the Left or Right key.  
114  
Fun box  
The Fun box menu contains several fun options:  
• WWW services  
• Media box  
• JAVA world  
• Melody composer  
WWW services  
Your phone comes equipped with a WAP (Wireless  
Application Protocol) browser, making it possible for  
you to access the Wireless Web.  
Each time you start the WAP browser, the phone  
connects to the Wireless Web and the service  
indicator icon (  
or  
) appears on the display to  
inform you that you are connected to the Wireless  
Web and will be billed accordingly. Rates vary  
according to your service option.  
The WAP browser ends the network connection  
after a certain period of inactivity and automatically  
reconnects as necessary. For this reason, you may  
find that you are billed for several network  
connections within a single session. This is normal  
and is designed to minimise your bill.  
Home  
When you select this menu option, the phone  
connects to the network and loads the homepage of  
the Wireless Web service provider.  
Once connected, the homepage displays. The  
content depends on the service provider.  
115  
 
Fun box  
Note: To quickly launch the WAP browser from idle  
mode, press the  
key.  
To scroll through the screen, use the Up or Down  
key.  
To exit the browser, press the  
key at any time.  
The phone returns to idle mode.  
Navigating the WAP browser  
To  
Press the  
scroll through and Up or Down key until the item  
select browser  
items  
you want highlights, and then  
press the soft key.  
select a numbered corresponding numeric key.  
item  
return to the  
previous page  
(or Back) soft key or  
key.  
C
return to the  
key and select the Home  
startup homepage browser option. For details,  
see page 117.  
Entering text in the WAP browser  
When you are prompted to enter text, the current  
text input mode appears above the right soft key.  
For further information on how to enter text, see  
page 41.  
116  
Fun box  
Using the WAP browser menus  
There are various menu options available when  
using the Wireless Web.  
To access the WAP browser menu:  
1. Press the  
key or scroll to the logo on the top  
soft  
left of all WAP pages and then press the  
key.  
A list of options appears.  
2. Highlight the required option using the Up or  
Down key.  
3. Press the  
soft key to select the option.  
4. If necessary, select the secondary option by  
pressing the Up or Down key and then press the  
soft key.  
Note: The WAP browser menus may vary,  
depending on your version of the browser.  
The following WAP browser menus are available:  
Back: returns to the previous page.  
Home: takes you back at any time to the  
homepage of the Wireless Web service provider.  
Exit: exits the WAP browser.  
Reload: reloads the current page.  
Show URL: shows the URL address of the WAP  
page you are currently accessing.  
About...: shows browser information.  
Using the WAP browser options  
Several options are available when you are using  
the Wireless Web. To access these options, press  
the  
key once connected to the Wireless Web.  
117  
 
Fun box  
Goto URL: allows you to manually enter the URL  
address of the site that you wish to access.  
Bookmark: allows you to use the Bookmark  
menu option. For details, see below.  
Messages: allows you to read or write an SMS  
message. For details, see page 88.  
Media box: allows you to use your Media box. For  
details, see page 121.  
Answering a call during a WAP connection  
You can receive an incoming call while you are  
navigating the WAP browser.  
Answer the call by pressing the  
key or the  
Accept soft key, as you normally would. After  
ending the call, you can continue navigating on the  
WAP page you were previously accessing.  
Bookmark  
This menu option allows you to store the URL  
addresses of up to 15 of your favourite Web sites.  
To store a URL address:  
1. Select an empty location and press the Select  
soft key.  
2. Enter the address and press the OK soft key to  
save it.  
3. Enter the name of the bookmark and press the  
OK soft key.  
For further information about how to enter text,  
see page 41.  
118  
Fun box  
Once you have stored an address, the following  
options are available when you select it.  
Go: allows you to access the site directly.  
Edit: allows you to change the name and URL  
address of the bookmark.  
Delete: allows you to delete the bookmark.  
Go to URL  
This menu option allows you to manually enter the  
URL address of the Web site that you wish to  
access.  
Enter the URL address and press the OK soft key.  
For further information about how to enter text, see  
page 41.  
Clear cache  
This menu option allows you to clear the  
information stored in the cache, the phone’s  
temporary memory used to store the most recently  
accessed WAP pages.  
Proxy settings  
This menu option allows you to set up five proxy  
servers.  
Note: You do not need to change the browser settings  
in most cases. Change the settings only when  
your network provider asks you to.  
119  
Fun box  
For each proxy, the following options are available:  
Proxy name: enter the name of the HTTP proxy  
server.  
GSM setting: you can change the proxy settings  
for the GSM network.  
Gateway: enter the IP Address and IP Port  
Data call type: select a network connection type;  
ISDN or Analogue  
.
Dial number: enter the PPP server phone number.  
Login ID: enter the PPP server login ID.  
Password: enter the PPP server password.  
GPRS setting: you can change the proxy settings  
for the GPRS network.  
Gateway: enter the IP Address and IP Port.  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
Login ID: enter the user ID required to connect to  
the GPRS network.  
Password: enter the password required to connect  
to the GPRS network.  
Home URL: you can change the address of your  
startup homepage.  
When the default homepage displays, you can  
delete it using the  
C
key and enter your own choice.  
To enter any special characters, for example, use  
the Symbolic mode; see page 48.  
Bearer: you can select the bearer to be used for  
each type of network accesses.  
120  
Fun box  
GPRS first: your phone will search for the GPRS  
network first. If this service is not available, you can  
set the GSM service temporarily.  
GPRS only: the phone only works in GPRS  
networks.  
GSM only: the phone only works in GSM networks.  
Current proxy  
This menu option allows you to activate one of the  
proxies you set up to use the WAP connection.  
Media box  
This menu option stores various media items from  
other sources, such as the WAP sites, the  
EasyStudio PC software, or multimedia messages.  
Photos  
This option allows you to view previously taken  
pictures.  
My photos: allow you to view the photos in my  
photos.  
My album1 / My album 2: allow you to view the  
photos in the selected album.  
When you view a photo, press the Options soft key  
to do the followings.  
Send: allows you to send it via a message.  
Rename: allows you to rename it.  
Delete: allows you to delete it.  
121  
   
Fun box  
Move to album: allows you to move it to one of  
the albums.  
Set as: allows you to set it as a wallpaper or a  
caller ID.  
Wallpaper: allows you to set it as a wallpaper.  
Caller ID: allows you to set it as a caller ID.  
Protection: allows you to protect it from deletion  
or not.  
Properties: allows you to view the detailed  
information of the photo.  
Images  
This option allows you to view the images received  
from other sources, such as the WAP sites, the  
EasyStudio PC software, or multimedia messages.  
When you view an image, press the Options soft  
key to send, rename, delete, set as a wallpaper, or  
view the properties.  
For further details about these options, see the  
options of the Photos menu (see page 121).  
Sounds  
This option allows you to listen to the recorded  
voices and the melodies received from other  
sources, such as the WAP sites, the EasyStudio PC  
software, or multimedia messages.  
Voices: allow you to listen to the recorded voices.  
My sounds: allow you to listen to various melodies.  
When you select a sound, press the Options soft  
key to send, rename, delete, set as a ringtone (only  
in My sounds) or view the properties.  
122  
Fun box  
For further details about these options, see the  
options of the Photos menu (see page 121).  
Delete all  
This option allows you to delete all of the photos,  
images and sounds in the Media box.  
Photos  
1. Scroll to a box and place a check mark next to it  
by pressing the Select soft key.  
Selecting All places check marks on all of the  
items. If you want to delete the protected  
photos and the caller ID photos, select the With  
protected photos option and the With caller  
ID photos option.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the photos in the  
box(es).  
Otherwise, press the No soft key.  
Images  
When a confirming message appears, press the Yes  
soft key to delete all of the images.  
Otherwise, press the No soft key.  
123  
Fun box  
Sounds  
1. Scroll to a sound box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
boxes.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the sounds in the  
box(es).  
Otherwise, press the No soft key  
Memory status  
Media box, Camera and multimedia message boxes  
share a given amount of memory in your phone.  
The display shows the status of free and used  
memory.  
You can see the used memory status of Media box,  
Camera and multimedia message boxes by pressing  
the Left or Right key.  
124  
Fun box  
JAVA world  
You can download MIDlets (Java applications  
running on mobile phones) from various sources  
using the WAP browser and store them in your  
phone.  
Downloads  
A list of Java games is displayed. In basic, two pre-  
loaded MIDlets (Java games) are provided. If the  
list of Java games is empty, a pop up message is  
displayed to invite to download a new game. To add  
MIDlets to the list, you can download MIDlets from  
various web sites.  
To  
Press the  
find a game  
run a game  
Up or Down key.  
Launch soft key  
Info soft key.  
.
view the detailed  
information  
delete the game  
Delete soft key in the  
information display.  
125  
 
Fun box  
SnowBallFight  
The goal of this game is to challenge and defeat the  
snowball fight champions of four different teams.  
Accessing a game  
After loading the game, press any key twice to go to  
the first menu screen. At the first menu screen,  
press the  
key to play a game, or press the  
key  
to access the main menus of this game.  
Play: allows you to start a new game or a saved  
game. Saved game allows you to continue the last  
stage you played.  
Instructions: show you the explanation of control  
keys, offense items and defense items.  
Configuration: allows you to turn the sound on or  
off, vibration on or off and select the game speed  
from 1 to 5.  
Quit: quits the game and returns to the downloads  
menu screen.  
Playing a game  
Move the character along the street using the  
navigation keys. If you have enough gold coins  
which you can earn while fighting to buy items, you  
can buy defense items at the drug store and offense  
items at the item shop. Move the character to the  
team of current stage and press the  
key to select  
it. When the snowball fight game starts, hit the rival  
kids with snowballs and avoid them. While fighting  
you can use items you have. If you raise enough  
mana, you can also use a special attack. You should  
win all fights in four stages in order to challenge the  
champions of the snowball fight.  
126  
Fun box  
Key Commands  
4/6 or Left/Right: move left or right  
2,5 or Up, :control the distance at the first press  
and throw the snowball at the next press.  
8 or Down: use the special attack depending on  
your mana  
3: enters item mode to use your item, select the  
item you want to use by pressing 2, 5, Up, or  
key.  
Special attacks  
Level 1: Aurora, all enemies are hit by a snowball.  
Level 2: Ice dragon, all enemies are hit by a  
snowball and frozen for 8 seconds.  
Level 3: Icicle storm, double powered snowball  
attack to all enemies and decreasing enemies’  
attack accuracy for 10 seconds.  
BubbleSmile  
BubbleSmile is an arcade puzzle game.  
Accessing a game  
After loading the game, you will see the following  
options, press the  
key:  
Start game: allows you to start a new game with  
timed mode or skilled mode.  
• Timed mode: you have to achieve the best score  
before the time bar runs out. When you get the  
same coloured bubble together, the time bar will  
increase.  
127  
Fun box  
• Skilled mode: you have to make more then 4  
bubbles disappear at once for the skill bar to  
increase. If less than 4 bubbles disappear, the  
skill bar will decrease.  
Continue: allows you to continue the last game  
you played. The menu is only available when a  
game has already been played.  
High score: shows you the high score table.  
How to play: shows you the instruction of this  
game.  
Option: allows you to turn the sound on or off  
Playing a game  
Your score goes up when you remove the bubbles.  
The bubbles will disappear only when more than 3  
of the same colour line up horizontally or diagonally.  
To line up the bubbles, move the band surrounding  
the 3 bubbles to suitable place and rotate it. When  
the game is over, your score is ranked on the high  
score board if it is within the top 3 scores.  
Key Commands  
2, 4, 6, 8, or navigation keys: move the band up,  
down, left, or right  
1: rotate the bubbles in the band counterclockwise  
3: rotate the bubbles in the band clockwise  
Internet settings  
This menu option allows you to set the information  
to connect to the Java server. This information is  
provided by the network operator automatically, but  
you can change it manually.  
128  
Fun box  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
Login ID: enter the user ID required to connect to  
the GPRS network.  
Password: enter the password required to connect  
to the GPRS network.  
DNS settings: enter the DNS address. The DNS  
(Domain Name Server) address to connect to the  
Java server is automatically set when making data  
call set up.  
Proxy settings: used in case you choose to use  
proxy server.  
• IP address: enter the HTTP proxy address  
required to connect to the GPRS network.  
• IP port: enter the port number required to  
connect to the GPRS network.  
Proxy: select whether or not you use a proxy server  
when you access network service.  
Note: Proxy settings and Proxy may not be shown by  
your service provider.  
Memory status  
You can check the free space available for Java  
downloads.  
The display also shows the total memory and used  
memory.  
129  
Fun box  
Melody composer  
Compose melody  
Melody Composer allows you to compose your own  
melodies using a variety of musical components.  
You can set one of your melodies as your ringtone  
or send them to other people by using the  
multimedia message service.  
When you access the Compose melody menu  
option, a composition screen with a stave displays  
with a selection point at the first note position (Do).  
Creating a melody  
You can compose a melody of up to 10 pages.  
1. Move the selection point up or down by pressing  
the Up or Down key.  
2. When you place the selection point correctly,  
press the Input soft key.  
3. Scroll a note or rest and press the OK soft key  
or press the corresponding number key to insert  
it.  
The note or rest is inserted onto the stave and  
the selection point moves to the right on the  
same line as the entered note or rest.  
4. Repeat steps 1 to 3 to add more notes and rests.  
Note: You can also add the background melody,  
change the tempo, or adjust the volume by  
using the composer options. See the  
following page.  
130  
Fun box  
5. When you have completed your melody, press  
the Options soft key.  
6. Select Save and press the Select soft key.  
7. Enter a melody title and press the OK soft key.  
The melody is saved and a new stave displays.  
Using the composer options  
While composing a melody, press the Options soft  
key to access the following options:  
New: opens a new composer screen.  
Open: opens the list of your own melodies.  
Play: plays back the current melody.  
Save: saves the melody.  
Save as: allows you to save the melody as a  
different name.  
Instrument: allows you to change the musical  
instrument for the melody.  
Background melody: allows you to use the  
background melody. You can choose one of a  
variety of music genres, such as Dance, Jazz, Latin,  
Pop, or Reggae.  
Add note: allows you to add notes in different  
chord.  
Tempo: allows you to change the tempo for the  
melody.  
Volume: allows you to adjust the volume level of  
the main and background melodies separately.  
131  
Fun box  
Editing a melody  
While composing a melody or after opening a saved  
melody, you can edit it.  
1. To change an entered note or rest, move the  
selection point by pressing the Left or Right key.  
The colour of the selected one changes to red to  
indicate that it is in Edit mode.  
2. Change the position of the note or type of the  
note or rest the same as you would when  
inserting it.  
Press the  
or  
key to move a note to the  
next semitone higher position or lower position.  
You can access the following options by pressing  
the Options soft key in Edit mode.  
Range: allows you to select more than one  
note or rest by pressing the Left or Right key.  
The selected ones are indicated in yellow.  
Copy: copies the selected note(s) or rest(s).  
Cut: cuts the selected note(s) or rest(s).  
Paste: pastes the selected note(s) or rest(s)  
to the end of the melody.  
Change: allows you to change the type of the  
currently selected note or rest.  
Delete: deletes the selected note(s) or  
rest(s).  
Play: plays back the current melody.  
132  
Fun box  
3. After editing, press the Right key until the  
selection point moves to an input position.  
4. Press the Options soft key and select Save to  
save the changes to the melody, or Save as to  
save the melody as a different name.  
Memory status  
This option allows you to check the memory status  
for the melody composer. Multimedia message  
boxes, Camera and Media box share a given  
amount of memory in your phone.  
The display shows the status of free and used  
memory. You can see the used memory status of  
multimedia message boxes, camera and media box  
by pressing the Left or Right key.  
133  
Organiser  
The Organiser feature enables you to:  
• view the calendar and/or write a memo, or to do  
list.  
• set the current date and time, and find out what  
time it is in various cities around the world.  
• set the alarm so that the phone sounds at the  
specific time.  
• use your phone as a voice recorder, calculator,  
unit convertor, timer, or stopwatch.  
New memo  
This menu option allows you to create a new memo.  
Note: You can also access this menu by holding down  
the  
C
key in idle mode.  
1. Write your memo of up to 100 characters and  
press the OK soft key.  
For further information about how to enter text,  
see page 41.  
2. Select the category of the memo to be saved  
and press the Select soft key.  
The following categories are available:  
Scheduler: general schedule events, such as  
appointments or meetings.  
To do list: tasks you need to do. They are  
saved on the to do list.  
Call: calls you need to make.  
134  
   
Organiser  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays, or other special days.  
Note: You can save up to 25 items to each  
category, so you can save 100 memos  
totally.  
3. Scroll to a date on the calendar by pressing the  
navigation keys. Press the Select soft key.  
4. If applicable depending on the category you  
selected, enter the event time and press the OK  
soft key.  
5. If you have selected the 12-hour time format  
(see page 141), select AM or PM by pressing  
the Up or Down key and then press the Select  
soft key.  
6. To set an alarm for the memo, press the Yes  
soft key.  
Otherwise, press the No soft key. The memo is  
saved immediately. Go to step 10.  
7. Enter the time for the alarm to sound and press  
the OK soft key.  
8. If you have selected the 12-hour time format  
(see page 141), select AM or PM by pressing  
the Up or Down key and then press the Select  
soft key.  
9. Select an alarm tone and press the Select soft  
key.  
The memo is saved and then displays on the  
screen.  
10. You can choose the following options by  
pressing the Options soft key:  
135  
 
Organiser  
Add: allows you to add a new memo on the  
day.  
Delete: allows you to delete the memo.  
Edit: allows you to edit the memo.  
Move: allows you to move the memo to a  
different date.  
Copy: allows you to copy the memo to a  
different date.  
11. When you have finished, press the  
soft key  
or the  
key to exit.  
Calendar  
The calendar helps you to keep track of your  
schedule, calls that you need to make, tasks that  
you need to do and anniversaries. You can set the  
alarm to sound when the date you have set for a  
schedule is reached.  
Consulting the calendar  
To  
Press the  
move to another  
day  
Left or Right key.  
move to another  
week  
Up or Down key.  
move to the  
previous or next  
month  
Up or Down key and hold it  
down  
move to the  
previous or next  
year  
Left or Right key and hold it  
down.  
136  
 
Organiser  
The following options are available when you press  
the Options soft key on the Calendar display:  
Add memo: allows you to add a new memo on the  
day.  
Go to date: allows you to enter a particular date  
and then schedule an event on that date.  
View all: shows all of the events that you have  
scheduled.  
Delete day: deletes the scheduled event on the  
selected day.  
Delete all: deletes all of the events that you have  
scheduled.  
Creating a new memo  
1. Scroll to a date on the calendar, referring to  
page 136, and press the Select soft key.  
2. Write your memo and press the OK soft key.  
For further information about how to enter  
characters, see page 41.  
3. Select the category of the memo to be saved  
and press the Select soft key.  
The following categories are available:  
Scheduler: general schedule events, such as  
appointments or meetings.  
To do list: tasks you need to do.  
Call: calls you need to make.  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays, or other special days.  
137  
Organiser  
4. Follow the procedure from step 4 on page 135  
onwards to save the memo.  
Viewing your calendar memos  
A date that has a memo associated with it is  
highlighted in a box. If you select a date when  
events have already been scheduled, the number of  
memos of each type is shown at the bottom of the  
calendar.  
: General schedule events  
: To do list  
: Calls  
: Anniversaries  
Press the Select soft key to view the memos.  
If you have created more than one memo on the  
same day, you can scroll to the event you want to  
view by pressing the Left or Right key.  
The following options are available when you press  
the Options soft key:  
Add: allows you to add a new memo. For further  
information about how to add a memo, see  
page 134.  
Delete: allows you to delete the memo.  
Edit: allows you to edit the memo.  
Move: allows you to move the memo to a different  
date.  
Copy: allows you to copy the memo to a different  
date.  
138  
Organiser  
To do list  
This menu allows you to view a list of tasks.  
To create a new memo of the To do list type:  
1. Write the memo about your task and press the  
OK soft key.  
For more information about how to enter  
characters, see page 41.  
2. Scroll to a date on the calendar, referring to  
page 136, and press the Select soft key.  
3. Follow step 4 on page 135 onwards to save the  
memo.  
Once you have defined tasks, they are listed with a  
status mark (  
for Done or  
for Undo) within  
the To do list menu.  
To scroll to a specific task, press the Up or Down  
key and press the Select soft key. The task displays  
with the deadline, alarm setting, job details and  
status mark.  
You can scroll to the previous or next task by  
pressing the Left or Right key.  
The following options are available when you press  
the Options soft key:  
Add: allows you to add a new task. For details  
about adding To do list-type memos, see page 134.  
Mark: allows you to change the status mark.  
Edit: allows you to edit the contents of the task.  
Move: allows you to move the task to a different  
date.  
139  
Organiser  
Copy: allows you to copy the task to a different  
date.  
Delete: allows you to delete the task.  
Delete all: allows you to delete all of tasks from  
the list.  
Clock  
This option allows you to change the current time  
and date displayed. You can also check the current  
time for Greenwich Mean Time (GMT) and 22 major  
cities around the world.  
The following options are available:  
Set time: allows you to enter the current time. You  
can choose the time format in the Set format  
menu option; see page 141.  
Note: Before setting the time, you must specify your  
time zone in the Set world time menu option.  
Set date: allows you to enter the day, month and  
year. You can change the date format in the Set  
format menu option; see page 141.  
Set world time: allows you to check the current  
time in GMT and 22 major cities around the world.  
Scroll through the cities using the Left or Right key.  
The screen shows the:  
• city name.  
• current date and time.  
• time difference between the selected city and  
your city if you have set the local time (see  
below) or GMT (by default).  
140  
Organiser  
To select your time zone:  
1. Select the city corresponding to your time zone  
by pressing the Left or Right key one or more  
times.  
The local date and time display.  
2. Press the Set soft key.  
3. To  
Select  
update the current Set local  
date/time with this  
new setting  
.
indicate that the  
time zone is  
Set DST. The  
shown next to the time  
icon is  
currently using the difference.  
daylight savings  
time  
indicate that the  
time zone is no  
longer using the  
daylight savings  
time  
Remove DST (only  
available when the  
icon is shown next to the  
time difference).  
4. When you have finished, press the  
the key to exit.  
soft key or  
Set format: allows you to change the time and  
date formats.  
Time format: 24 hours  
12 hours  
Date format: DD/MM/YYYY (day/month/year)  
YYYY/MM/DD (year/month/day)  
141  
 
Organiser  
Alarm  
This option allows you to set an alarm to sound at  
the specific time. You can set up three alarms or set  
the phone to sound an alarm when it is switched off.  
To set an alarm:  
1. Select either Morning call  
,
Alarm1, or Alarm2  
by pressing the Up or Down key.  
The  
set. The  
icon means that no alarm is currently  
icon means that an alarm has  
already been set.  
2. Press the Select soft key.  
3. Press the Options soft key.  
4. Scroll to an option by pressing the Up or Down  
key and press the Select soft key. Change the  
setting, as needed.  
Alarm day: place or remove a check mark on  
the day(s) of the week by pressing the Select  
soft key. If you want to set a daily alarm,  
select Everyday. If you want to set a  
temporary alarm, select One-time alarm  
.
When you press the OK soft key after  
selecting, your phone asks you to enter the  
alarm time.  
Alarm time: enter the time for the alarm to  
sound.  
Alarm tone: select an alarm melody.  
Remove alarm: deactivates the alarm.  
Note: The alert type of Alarm1 and 2 is affected by  
the alert type of incomming call. The type of  
alert for Moring call is always a melody.  
5. Repeat step 4 to change each setting call.  
142  
Organiser  
6. When you have finished, press the  
the key to exit.  
soft key or  
Once an alarm has been set, you can see the Alarm  
icon ( ) on the top line of the display. To stop the  
alarm when it sounds, press any key.  
Note: When the quiet mode is activated, the alarm  
doesn’t sound. But When you set a morning call,  
the alarm sounds even if the quiet mode is  
activated.  
To set the alarm to sound even if your phone is  
switched off:  
1. Scroll to Auto power on the Alarm list and  
press the Select soft key.  
2. If necessary, press the Up or Down key to select  
On  
.
To turn the Auto power feature off, select Off  
.
3. Press the Select soft key to save the setting.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Once you have activated the auto power alarm, a  
check mark appears next to Auto power. If the  
phone is switched off at the specified alarm time, it  
automatically switches on and the alarm sounds. It  
then automatically switches off again.  
To turn off an alarm:  
• Press the Confirm soft key.  
• When the alarm for morning call sounds, press  
any key or the Snooze soft key to stop the alarm  
for five minutes, after which it will resume. You  
can do this a maximum of five times.  
143  
Organiser  
The snooze alarm sounds while the phone is  
switched off and the Auto power is set to on, and  
the quiet mode is activated. If you reset the moring  
call’s alarm time or deactivate the alarm for  
morning call, the snooze alarm is cancelled.  
Voice recorder  
This menu option allows you to record a voice  
memo and send it to other people by using the  
multimedia message service.  
Record  
This option allows you to record a new voice memo.  
1. To start recording, select the  
by pressing  
the Select soft key.  
2. Record a voice memo by speaking into the  
microphone.  
3. When you select the  
time expires, the voice memo is saved in your  
phone automatically. Select the to play the  
recorded voice. You can also pause, rewind, or  
forward by pressing the , or  
, or if the recording  
,
.
4. Otherwise, press the Options soft key to use  
the following options.  
Send: allows you to send the recorded voice  
memo to other people by using the multimedia  
message service.  
Rename: allows you to change the name of the  
recorded voice memo.  
Delete: allows you to delete the recorded voice  
memo.  
144  
Organiser  
Properties: displays the information about the  
recorded voice memo, such as name, memory  
size, and file format.  
5. When you have finished, press the  
or the key to exit.  
soft key,  
Voices  
This option shows you the list of voice memos you  
have recorded. Scroll to the voice memo you want  
and press the Select soft key. The voice memo will  
play back automatically. While playing, you can stop  
playing, pause, rewind or forward it by selecting the  
,
,
, or  
. The following options are  
available when you press the Options soft key:  
Send: allows you to send the recorded voice memo  
to other people by using the multimedia message  
service.  
Rename allows you to change the name of the  
:
recorded voice memo.  
Delete: allows you to delete the recorded voice  
memo.  
Properties: displays the information about the  
recorded voice memo, such as name, memory size,  
and file format.  
Delete all  
This option allows you to delete all of the recorded  
voice memos. When a confirming message appears,  
press the Yes soft key to confirm. Otherwise, press  
the No soft key.  
145  
Organiser  
Settings  
This option allows you to change the default  
configuration of the voice recorder.  
The following options are available:  
Recording time: allows you to set the duration of  
recording.  
Normal: you can record your voice memo until you fill  
out the phone’s memory capacity.  
Limit size (for MMS): you can record your voice memo  
for up to 2 minutes which enables you to attach the  
recorded voice memo to multimedia messages.  
Volume: allows you to adjust the voice memo  
volume when it plays.  
Default name: allows you to change the default  
prefix name of the voice memo.  
Memory status  
This option allows you to check the memory status for  
the voice recorder. Multimedia message boxes,  
Camera and Media box share a given amount of  
memory in your phone.  
The display shows the status of free and used  
memory. You can see the used memory status of  
multimedia message boxes, camera and media box  
by pressing the Left or Right key.  
Calculator  
You can use the phone as a calculator. The calculator  
performs basic arithmetic functions, such as addition,  
subtraction, multiplication, division and remainder  
computation.  
146  
Organiser  
To perform a calculation:  
1. Enter the first number using the number keys.  
Note: To erase any mistakes or clear the display,  
press the  
C
key.  
2. Press the  
key to enter a decimal point (.) or  
the key to enter the appropriate arithmetic  
symbol:  
(divide),  
+
%
(add),  
(remainder),  
-
(subtract),  
or ).  
(multiply),  
/
(
3. Enter the second figure.  
4. Repeat steps 2 and 3, if necessary.  
5. Press the Equal soft key to view the result.  
The result appears in the Answer box.  
Note: The result is rounded to six decimal places.  
6. When you have finished, press the  
the key to exit.  
soft key or  
Conversion  
This menu option allows you to convert from one  
type of unit to another.  
To convert a value:  
1. Scroll to the type of conversion to be performed  
from Currency Length, Weight, Volume,  
,
Area and Temperature, and press the Select  
soft key.  
2. Enter the value to be converted and press the  
Down key to move to the From field.  
You can enter a decimal point (.) using the  
key. And you can enter a minus (-) using the  
key in Temperature  
.
147  
Organiser  
3. Select the original unit by pressing the Left or  
Right key and press the Down key to move to  
the To field.  
Refer to the table on the following page for the  
units available.  
4. Select the required unit by pressing the Left or  
Right key.  
5. Press the OK soft key or the  
key to view the  
result.  
The result appears in the Answer box.  
6. When you have finished, press the  
the key to exit.  
soft key or  
Units available  
Type  
Units  
Currency  
EURO  
FRF  
DEM  
ESP  
BEF  
GRD  
ITL  
NLG  
FIM  
IEP  
ATS  
PTE  
LUF  
Length  
mm  
km  
cm  
in  
m
ft  
yard mile  
kg  
Weight  
Volume  
g
ton  
grain oz  
pound  
3
3
cm  
m
l
3
3
3
in  
ft  
yd  
gal  
148  
Organiser  
Type  
Units  
2
2
Area  
cm  
m
a
2
2
2
in  
ft  
yd  
acre  
°C  
Temperature  
°F  
Timer  
Using the Timer feature, you can set the phone to  
sound an alarm after a certain time.  
1. Press the Set soft key.  
2. Enter the length of time you want to count down  
in hours and minutes and press the OK soft key.  
3. Press the Start soft key to start counting down.  
Even if you exit the Timer screen, the timer will  
continue running. After the specified time has  
expired, the phone informs you by playing a melody  
and displaying a text notification.  
To stop the timer melody when it sounds, press any  
key.  
To stop the timer before the end, press the Stop  
soft key on the Timer screen.  
Notes  
:
• The timer uses power from the battery consequently,  
the phone’s operating time is reduced.  
• When the quiet mode is activated, there is no sound.  
149  
Organiser  
Stopwatch  
The stopwatch can be used to measure times for  
various sports.  
Example: Running or swimming races  
Up to four stopwatches can be used.  
The precision of the stopwatch is one hundredth of  
a second. The maximum measurement time is 10  
hours.  
1. To start the stopwatches, press the OK soft key.  
2. When you wish to stop the first stopwatch, press  
the OK soft key. Repeat this step for the other  
stopwatches.  
3. Press the Reset soft key to reset the watches.  
4. Press the  
C
or  
key to exit.  
150  
Camera  
Using the camera module embedded in your phone,  
you can take pictures for people or events while on  
the move. Additionally, you can send photos to  
other people in a picture message or as an e-mail  
attachment. The camera produces JPEG pictures.  
CAUTION  
:
• Do not take photos of people without their  
permission.  
• Do not take photos in a place where cameras are not  
allowed.  
• Do not take photos in a place where you may  
interfere with another person’s privacy.  
Note: Be careful not to cover the camera lens with  
your hand when holding your phone. The  
camera lens is found on the back of the phone.  
Take photos  
This menu allows you to take a picture, and to send  
the photo as a picture message to other  
destinations. You can use the picture as a  
background and store it separately in My album  
folder.  
Taking a picture  
1. To access the Take photos menu directly, press  
the Up key in idle mode. And then press the  
Select soft key when Take photos highlights.  
To take pictures immediately in idle mode, press  
and hold the Camera ( ) key on the right side of  
the phone.  
151  
 
Camera  
The image to be captured appears on the  
display.  
The icons on the top line of the display indicate  
the size, quality, flash type and current mode  
(shown if you select the multi-shot mode or  
night mode).  
2. Adjust the image by aiming the camera at the  
subject.  
To  
Press the  
adjust the brightness of Left or Right key.  
the picture  
zoom in or out within the Up or Down key.  
picture  
flip the picture up and  
down  
volume up key  
reverse the picture like a volume down key  
mirror image  
turn the viewfinder’s  
frame on or off  
1
key  
change the picture size  
2
3
key  
key  
change the picture  
quality  
select the mode  
select the effect  
4
5
6
key  
key  
key  
turn the anti-banding  
noise on or off  
select the frame  
7
8
9
key  
key  
key  
select the delay time  
go to the My photos  
menu  
152  
Camera  
To  
Press the  
0 key  
switch the camera flash  
on or off (if you set the  
Manual option in the  
Flash light menu. See  
page 156, 159)  
For more information about these functions, see  
“Using the camera options” on page 154.  
3. Press the  
soft key or the Camera ( ) key on  
the right side of the phone to take a picture.  
The picture is automatically saved in the My  
photos (see page 157).  
4.  
To  
Press the  
use the options  
Options soft key.  
For details about the  
options, see below.  
delete the picture file  
Delete soft key.  
return to capture mode  
to take another picture.  
C
key.  
turn the camera off  
key.  
and return to idle mode  
When you press the Options soft key after taking a  
picture, the following options are available. Scroll to  
the option you want by pressing the Up or Down  
key and press the Select soft key:  
Send: allows you to send a multimedia message  
using the taken picture. For further details about  
sending multimedia messages, see page 95.  
Rename: allows you to rename the taken picture.  
153  
 
Camera  
Go to my photos: allows you to see the taken  
pictures in the My photos (see page 157).  
Set as: allows you to set it as a wallpaper or a  
caller ID.  
Wallpaper: allows you to set it as a wallpaper.  
Caller ID: allows you to set it as a caller ID.  
Protection: allows you to protect the taken picture  
from deletion or not.  
Properties: this option shows you the information  
about the picture, such as name, size, date,  
resolution, protection type and format.  
Using the camera options  
When you press the  
soft key in the capture  
mode, the following options are available for the  
current shot:  
Mode: You can take a picture in various modes.  
Once you change the mode, its indicator appears at  
the top right on the display.  
Normal shot: you can take a picture in the normal  
mode.  
Multi-shot: you can take action stills. Select speed  
and the number of pictures you want to take. When  
you press the  
soft key or the Camera ( ) key  
on the right side of the phone, the phone  
automatically takes and saves the pictures  
successively as many times as you set. The Mobile  
(128*120) size will be set by default.  
154  
 
Camera  
Night mode: this option allows you to take a picture  
of the best quality when it is dark.  
Capture only: you can take pictures without review.  
Frame: this option allows you to use a frame on  
the picture. Press the navigation keys to find the  
frame format you want to use. You can preview the  
image with the frame format by using the Preview  
soft key. The Mobile (128*120) size will be set by  
default.  
Note: The zoom control bar and the brigthness control  
bar do not display when you use the frame.  
Effects: this option allows you to apply special  
effects to the picture. Press the Up or Down key to  
find the tone you want to use. Gray  
Sepia Emboss and Sketch are available. To  
deactivate the effect setting, select Off  
,
Negative,  
,
.
Rotation: this option allows you to flip the image  
vertically or reverse it as a mirror image.  
Timer: you can select the delay time. When you  
press the capture key, the phone takes the picture  
after the specified time. When you exit the camera  
mode or select Off in the Timer menu, the timer is  
off.  
Settings: this option allows you to change the  
settings for taking a picture. And this option is  
synchronized with the Settings menu. See  
page 158.  
155  
Camera  
Photo size: sets the image size to one from  
VGA(640*480) QVGA(320*240),  
,
QQVGA(160*120) and Mobile(128*120). The  
selected image size displays on the capture screen.  
Photo quality: allows you to select the image quality  
from Super fine Fine, Normal, and Economy.  
,
The option you select appears on the top of the  
display.  
Shutter sound: allows you to select a sound when  
you press the shutter, the soft key or the  
Camera ( ) key on the right side of the phone.  
Note: This sound setting is not applied to the multi-  
shot sound.  
Flash light: allows you to set the camera flash to  
automatic or manual use.  
• Manual: to switch the camera flash on or off, you  
have to press the  
0
key in the capture mode.  
• Automatic: when you press the shutter, the  
soft key or the Camera ( ) key on the right side  
of the phone, the phone lights a flashlight. After a  
while the camera will take a picture and the  
flashlight will go out.  
Default name: allows you to change the default  
prefix name of the picture.  
Help: this option shows you the functions of the  
navigation keys and the volume keys in the capture  
mode.  
156  
 
Camera  
My photos  
In this menu, you can review the pictures you have  
taken.  
To  
Press the  
scroll through the  
pictures  
navigation keys.  
show the selected picture View soft key.  
as an enlargement  
go back to the multiple  
view mode  
Multi soft key.  
use the options  
Options soft key.  
For details, see  
page 153.  
turn the camera off  
key.  
and return to idle mode  
My albums  
My album allows you to store the pictures as your  
photo album. Select one of albums. It shows the  
pictures saved in the album. For details about  
viewing your pictures and using them, see  
page 157.  
Delete all  
You can delete all the photos saved in each  
category.  
157  
 
Camera  
1. Scroll to a photo box and place a check mark  
next to it by pressing the Select soft key.  
Selecting All places check marks on all of the  
photo boxes. If you want to delete the protected  
photos and the caller ID photos, select the With  
protected photos option and the With caller  
ID photos option.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the OK  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the photos in the  
box(es).  
Otherwise, press the No soft key.  
Settings  
This menu option allows you to change the default  
settings of the options for using the camera feature.  
The following options are available:  
Photo size: sets the image size to one from  
VGA(640*480) QVGA(320*240),  
,
QQVGA(160*120) and Mobile(128*120). The  
selected image size displays on the capture screen.  
Photo quality: allows you to select the image  
quality from Super fine Fine, Normal, and  
,
Economy. The option you select appears on the top  
of the display.  
158  
 
Camera  
Shutter sound: allows you to select a sound when  
you press the shutter, the  
soft key or the  
Camera ( ) key on the right side of the phone.  
Note: This sound setting is not applied to the Multi-  
shot sound.  
Flash light: allows you to set the camera flash to  
automatic or manual use.  
Manual: to switch the camera flash on or off, you  
have to press the  
0
key in the capture mode.  
Automatic: when you press the shutter, the  
soft  
key or the Camera ( ) key on the right side of the  
phone, the phone lights a flashlight. After a while  
the camera will take a picture and the flashlight will  
go out.  
Default name: allows you to change the default  
prefix name of the picture.  
Memory status  
Camera, Media box and multimedia message boxes  
share a given amount of memory in your phone.  
The display shows the status of free and used  
memory.  
You can see the used memory status of Camera,  
Media box and multimedia message boxes by  
pressing the Left or Right key.  
159  
 
Phone settings  
Many different features of your phone can be  
customised to suit your preferences via the  
Phone settings menu.  
Display  
You can change the background image and the  
colour of the components on the display according  
to your preference and needs.  
Wallpaper  
This option allows you to change the background  
image to be displayed in idle mode.  
The following options are available:  
Animations: allows you to select one of the  
animations.  
Photos: allows you to select one of the photos  
taken by the camera.  
Images: allows you to select one of the images  
from the Images menu option in the Media box  
menu that are downloaded from the WAP sites, the  
EasyStudio PC software or multimedia messages.  
Text position: allows you to select the position of  
the text displayed on the idle screen, such as the  
operator’s name, current date and time, and text  
notifications of missed calls or new messages.  
Choose either Top or Bottom. If you set this option  
to Off, your phone displays only the wallpaper  
image.  
160  
 
Phone settings  
Text style: allows you to set the style of the text  
displayed on the idle screen.  
Note: When you set the wallpaper image to  
Calendar, the Text position and Text style  
options don’t work.  
Skin  
You can change the colour setting of the display  
components, such as soft key indications area or  
the menu names and icons.  
Backlight  
You can specify how long the phone uses the  
backlight.  
Select how long the backlight remains on after the  
last key is pressed.  
LCD brightness  
This option allows you to adjust the brightness of  
the display screens to make them lighter or darker.  
1. Adjust the contrast by using the Up and Down  
keys or the volume keys on the left side of the  
phone.  
2. When you are satisfied, press the OK soft key to  
save the selection.  
161  
 
Phone settings  
Greeting message  
This menu option allows you to set a greeting  
message to be displayed briefly when the phone is  
switched on.  
When you access this menu, the current message  
displays.  
To  
Press the  
C key and hold it down.  
clear the existing  
message  
enter a new  
message  
appropriate alphanumeric  
keys.  
save your input  
OK soft key.  
cancel your input  
and return to idle  
mode  
key.  
For further information about how to enter  
characters, see page 41.  
Language  
You can select a different language for the display  
text and text input modes. The following options  
are available:  
Text language: allows you to change the language  
of the display text, such as menus, options or  
warning messages.  
Input mode: allows you to set the default  
language to be used in the text input mode.  
162  
   
Phone settings  
Security  
The security settings enable you to restrict the use  
of your phone to people and types of calls of your  
choice.  
Various codes and passwords are used to protect  
the features of your phone. For more information,  
see page 174 -176.  
PIN check  
When the PIN check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the  
network when you switch it on.  
Enable: you must enter the PIN each time the  
phone is switched on.  
To change your PIN, see the Change PIN menu  
option below.  
Change PIN  
This feature allows you to change your current PIN  
to a new one, provided that the PIN check feature is  
enabled. You must enter the current PIN before you  
can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
163  
   
Phone settings  
Phone lock  
When the Phone lock feature is enabled, the phone  
is locked and you must enter the 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the  
factory. To change the phone password, see the  
Change password menu option below.  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
Enable: you are required to enter the phone  
password when you switch the phone on.  
Change password  
The Change password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
Privacy  
This feature allows you to lock or unlock the usage  
of the contents, such as multimedia messages,  
photos, images and sounds.  
To enable or disable the Privacy feature, you must  
enter your phone password.  
164  
     
Phone settings  
SIM lock  
To enable the SIM lock feature, you must enter a  
new four to eight digit phone password, and confirm  
it by entering it again.  
The following options are available:  
Disable: you can use any other SIM cards with  
your phone.  
Enable: you must enter the SIM lock code to use  
another SIM card with your phone.  
To unlock the SIM, enter the SIM lock code.  
FDN mode  
The FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The following options are available:  
Disable: you can phone any number.  
Enable: you can only phone numbers stored in  
Phonebook. You must enter your PIN2.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
To change your PIN2, see the Change PIN2 menu  
option below.  
Change PIN2  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
165  
Phone settings  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
Auto redial  
With the Auto redial function, the phone makes up  
to ten attempts to redial a phone number after an  
unsuccessful call.  
Note: The interval between two call attempts varies.  
The following options are available:  
Off: the number is not redialled.  
On: the number is redialled automatically.  
Voiceclarity  
This menu option makes a sound loud and clear.  
It is useful when you are in a noisy place.  
The following options are available:  
Off: the phone does not turn on the voiceclaity.  
On: the phone turns on the voiceclaity when you  
are in a noisy place.  
166  
 
Phone settings  
Slide settings  
You can select the phone’s action when you slide  
the folder up or down.  
Up: you can select either None or Accep call  
.
If you select the None option, you have to press a  
key to answer a call, depending on the setting of  
the Anykey answer option.  
Otherwise if you select the Accep call option, you  
can simply slide the folder up to answer a call.  
Down: you can select either Stop operation or  
Continue operation.  
If you select the Stop operation option, the phone  
stops the current operation and locks the keypad  
automatically, when you slide the folder down.  
Otherwise if you select the Continue operation  
option, the phone performs the current operation  
continuously, when you slide the folder down. But  
the confirming message to lock the keypad appears  
on the display in the idle mode.  
Anykey answer  
You can answer incoming calls by pressing anykey  
or not.  
Off: you can only press  
or the Accept soft key  
to answer incoming calls.  
On: you can press any key, except  
to answer  
incoming calls.  
167  
 
Phone settings  
Infrared activation  
In this menu, you can activate or deactivate the  
infrared port.  
The following options are available:  
Off: deactivates infrared feature on the phone.  
On: activates the infrared feature on the phone.  
The IrDA icon (  
display.  
) appears on the top line of the  
If there is no communication between your phone  
and the IrDA-compliant device within 1 minute of  
activating the feature, it is automatically  
deactivated.  
Reset settings  
This menu option allows you to reset your phone to  
its default configuration. You can reset the sound  
settings, phone settings or all of the settings  
together.  
1. Select one of the settings to reset by pressing  
the Select soft key.  
2. When a confirming message appears, press the  
Yes soft key to reset settings. Then enter the  
phone password and press the OK soft key.  
The password is preset to “00000000” by  
default. To change it, see page 164.  
Otherwise, press the No soft key.  
168  
 
Line Service)  
The ALS feature enables two lines to be associated  
with one SIM card. Consequently, you can make  
and receive calls on either line. If you subscribe to  
this network service, a few additional menu options  
enable you to set up this feature.  
Note: Please contact your service provider to check  
the availability of this feature and how to  
subscribe to ALS.  
Selecting a line  
You can select a line for each call via the Active  
line menu option. For further details, refer to  
page 82.  
Editing the line name  
You can edit the name of each line via the Own  
number menu option.  
When you edit the name of a line, this name  
replaces “Line 1” or “Line 2, as applicable. For  
further details, refer to page 66.  
Setting the ring type  
To distinguish between incoming calls on the two  
lines, you can select a different ring tone for each  
line via the Incoming calls menu option. For  
further details, see page 83.  
169  
Using ALS (Alternate Line Service)  
Setting call diverting options  
You can set up call diverting via the Call diverting  
menu option. This service reroutes incoming calls  
on the line of your choice to the specified number.  
For further details, see page 74.  
Viewing call information  
You can view call times and last call cost  
information for each line. For further details, see  
page 72.  
170  
Solving problems  
Before contacting the after-sales service, perform  
the following simple checks. They may save you the  
time and expense of an unnecessary service call.  
When you switch your phone on, the  
following messages may appear  
“Insert SIM” displays  
Check that the SIM card is correctly installed.  
Phone locked Enter password  
The Phone lock feature is enabled. You must enter  
the phone’s password before you can use the  
phone.  
Enter PIN  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
• The PIN check feature is enabled. Every time the  
phone is switched on, you must enter the PIN. To  
disable this feature, use the PIN check menu  
option. See page 163.  
Enter PUK  
The PIN was entered wrongly three times in  
succession and the phone is now blocked. Enter the  
PUK supplied by your network operator.  
171  
Solving problems  
“No service” displays  
• The network connection was lost. You may be in a  
weak reception area (in a tunnel or surrounded  
by buildings). Move and try again.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
You have entered a number but it was  
not dialled  
• Have you pressed the  
key?  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
Your correspondent cannot reach you  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
Your correspondent cannot hear you  
speaking  
• Have you switched off the microphone (Mute  
appears)?  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
172  
Solving problems  
The phone starts beeping and “Battery  
low” flashes on the display  
The battery is insufficiently charged. Replace the  
battery and recharge it.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
No number is dialled when you recall a  
Phonebook entry  
• Check that the number has been stored correctly,  
by using the Phonebook search feature.  
• Re-store them, if necessary.  
If the above guidelines do not help you to solve  
the problem, take a note of:  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
Then contact your local dealer or Samsung  
after-sales service.  
173  
Access codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help you  
protect the phone against unauthorised use.  
Some access codes can be changed using the  
Security menu option. See page 163 for further  
details.  
Phone password  
The Phone lock feature (see page 164) uses the  
phone password to protect your phone against  
unauthorised use.  
The phone password is supplied with the phone and  
is preset to “00000000” at the factory. To change  
the password, use the Change password menu  
option. See page 164.  
PIN  
The PIN (Personal Identification Number) protects  
your SIM card against unauthorised use. It is  
usually supplied with the SIM card. When the PIN  
check feature is enabled (see page 163), you must  
enter the PIN each time you switch on the phone.  
If you key in an incorrect PIN three times in  
succession, key in the PUK and press the OK soft  
key to unlock the phone. Key in a new PIN and  
press the OK soft key. Key in the new PIN again and  
press the OK soft key.  
174  
   
Access codes  
PIN2  
The PIN2, supplied with some SIM cards, is required  
to access some functions, such as charging unit  
counters. These functions are only available if  
supported by your SIM card.  
If you key in an incorrect PIN2 three times in  
succession, key in the PUK2 and press the OK soft  
key to unlock the phone. Key in a new PIN2 and  
press the OK soft key. Key in the new PIN2 again  
and press the OK soft key.  
PUK  
The PUK (PIN Unblocking Key) is required to change  
a blocked PIN. The PUK may be supplied with the  
SIM card. If not, contact your local service provider.  
If you key in an incorrect PUK ten times in  
succession, the SIM card cannot be used anymore.  
Contact your service provider for a new card.  
You cannot change the PUK. If you lose the code,  
contact your service provider.  
PUK2  
The PUK2, supplied with some SIM cards, is  
required to change a blocked PIN2.  
If you key in an incorrect PUK2 ten times in  
succession, you cannot use the functions requiring  
the PIN2. Contact your service provider for a new  
card.  
175  
 
Access codes  
You cannot change the PUK2. If you lose the code,  
contact your service provider.  
Call barring password  
The 4-digit call barring password is required when  
you use the Call barring function. You obtain the  
password from your service provider when you  
subscribe to this function.  
You can change this password using the Change  
barring password menu option. For further  
details, see page 78.  
176  
 
Health and safety  
information  
SAR certification information  
This phone meets European Union (EU)  
requirements concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured, so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by the EU Council.  
These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the  
general population. The guidelines were developed  
by independent scientific organisations through the  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
*
the EU Council is 2.0W/kg.  
The Highest SAR Value for this model  
phone was 0.506 W/kg.  
* The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body  
tissue. The limit incorporates a substantial margin of  
safety to give additional protection for the public and to  
account for any variations in measurements. The SAR  
values may vary depending on national reporting  
requirements and the network band.  
177  
 
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Before a new model phone is available for sale to  
the public, compliance with the European R&TTE  
Directive must be shown. This directive includes as  
one of its essential requirements the protection of  
the health and safety of the user and any other  
person.  
Precautions when using batteries  
• Never use any charger or battery that is damaged  
in any way.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
• Battery charging time depends on the remaining  
battery charge and the type of battery and  
charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and  
178  
Health and safety information  
standby time) is noticeably shorter than normal,  
it is time to buy a new battery.  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
179  
Health and safety information  
Road safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations in a given area or  
country.  
Operating environment  
Remember to follow any special regulations in force  
in any area and always switch off your phone  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
180  
Health and safety information  
Electronic devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
• Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
• Should not carry the phone in a breast pocket  
Should use the ear opposite the pacemaker to  
minimise potential interference  
If you have any reason to suspect that interference  
is taking place, switch your phone off immediately.  
Hearing aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
181  
Health and safety information  
Other medical devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch your phone off  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
182  
Health and safety information  
Potentially explosive atmospheres  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas  
(such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust  
or metal powders, and any other area where you  
would normally be advised to turn off your vehicle  
engine.  
Emergency calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
183  
Health and safety information  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
3. Press the  
key.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not cut off the call until given  
permission to do so.  
Other important safety information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
• Check regularly that all wireless phone equipment  
in your vehicle is mounted and operating  
properly.  
184  
Health and safety information  
• Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
• Switch off your phone before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
Care and maintenance  
• Keep the phone and all its parts and accessories  
out of the reach of small children’s.  
• Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that will corrode  
electronic circuits.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
185  
Health and safety information  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove or a radiator.  
The phone may explode when overheated.  
• Use only the supplied or an approved  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
• If the phone, battery, charger or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
186  
Glossary  
To help you understand the main technical terms  
and abbreviations used in this booklet and take full  
advantage of the features of your mobile phone,  
here are a few definitions.  
ALS (Alternate Line Service)  
Capability of associating two lines with one SIM  
card. With this service, you can make and receive  
calls on either line, as required.  
Call barring  
Ability to restrict outgoing and incoming calls.  
Call diverting  
Ability to reroute calls to another number.  
Call holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call waiting  
Ability to inform users that they have an incoming  
call when engaged on another call.  
CLI (Caller Line Identification) services  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
187  
Glossary  
EMS (Enhanced Message Service)  
Network service sending and receiving messages  
that include images, sounds and animations to and  
from another user without having to speak to the  
correspondent.  
GPRS (General Packet Radio Service)  
New non-voice value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS guaranties continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
GSM (Global System for Mobile  
communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
IrDA (Infrared Data Association)  
A standard defined by the IrDA consortium. It  
specifies a way to wirelessly transfer data via  
infrared radiation. The IrDA specifications include  
standards for both the physical devices and the  
protocols they use to communicate with each other.  
MMS (Multimedia Message Service)  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
188  
Glossary  
users, MMS is similar to Short Message Service  
(SMS)-it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers, thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can also be sent by  
e-mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and later also video clips and presentation  
information.  
Multiparty calling  
Ability to establish a conference call involving up to  
five additional parties.  
PIN (Personal Identification Number)  
Security code that protects the phone/SIM against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
PUK (PIN Unblocking Key)  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
Roaming  
Use of your phone when you are outside your home  
area (when travelling for example).  
189  
Glossary  
SDN (Service Dialling Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support  
and emergency services.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot  
on the back of the phone and is protected by the  
battery.  
SMS (Short Message Service)  
Network service sending and receiving messages to  
and from another subscriber without having to  
speak to the correspondent. The message created  
or received can be displayed, received, edited or  
sent.  
Soft keys  
Two keys marked  
purpose of which:  
and  
on the phone, the  
• varies according to the function that you are  
currently using  
• is indicated on the bottom line of the display just  
above the corresponding key  
Voice mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice) and  
records a message.  
190  
Index  
log • 28  
making • 27  
missed • 29 70  
multi-party • 38  
received • 70  
records • 70  
redialling • 28  
automatically • 166  
rejecting • 30  
A
ABC mode • 41  
Access codes • 174  
Accessories •  
Active line  
,
45  
,
9
select • 82  
service, use • 169  
Alarm, set • 142  
Alert type • 84  
ALS • 169  
ring tone • 83  
searching for a number  
in phonebook • 56  
times • 72  
Autopower alarm • 143  
waiting • 37  
,
79  
B
Card, SIM  
background image, set • 160  
Backlight • 16  
Barring  
dialling numbers • 62  
inserting • 18  
locking • 165  
calls • 76  
removing • 19  
Battery  
Care • 185  
Characters  
charging • 21  
installing • 19  
low battery indicator •  
22  
entering • 41  
Clock • 140  
Conference calls • 38  
Connection tone • 85  
Conversion, unit • 147  
Cost of calls • 72  
precautions • 178  
removing • 20  
Broadcast • 108  
C
D
Calculator • 146  
Calendar • 136  
Caller  
Date, set • 140  
Dialled calls • 71  
Dialling • 27  
SIM card numbers • 62  
Display  
groups • 67  
ID • 81  
Calls  
brightness • 161  
icons • 14  
alert type • 84  
answering • 30  
a second call • 37  
barring • 76  
costs • 72  
dialled • 71  
diverting • 74  
emergency • 183  
ending • 30  
holding • 36  
international • 28  
language • 162  
DTMF tones, send • 33  
E
Earpiece volume • 31  
Emergency calls • 183  
External speaker • 40  
191  
Index  
F
M
FDN mode • 165  
Fixed Dial Number mode •  
165  
Fun box • 115  
Functions, select • 24  
Maintenance • 185  
Media box • 121  
Memory status, phonebook •  
68  
Memos  
making • 134  
viewing • 138  
Menu  
list • 50  
scrolling • 49  
Messages  
,
137  
G
Greeting message • 162  
Group settings • 67  
MMS • 95  
SMS • 88  
Messages • 88  
I
Icons • 14  
Inbox • 91  
alert types • 84  
broadcast • 108  
deleting • 94 106  
greeting • 162  
inbox • 91  
outbox • 93  
preset • 107  
reading • 91  
ring tone • 84  
Input mode  
changing • 42  
language, set • 162  
International calls • 28  
Internet • 115  
,
K
Key tones  
voice mail • 107  
writing • 89  
Microphone, mute • 32  
Minute minder • 86  
type, select • 86  
volume • 31  
Keys  
location • 10  
Missed calls • 29  
,
70  
Multi-party calls  
making • 38  
L
private conversation • 39  
removing a participant •  
39  
Language, set • 162  
LCD  
brightness • 161  
icons • 14  
N
Names  
settings • 160  
Length of calls • 72  
,
86  
Letters  
entering • 41  
Locking  
entering • 41  
searching/dialling • 56  
storing • 59  
phone • 164  
Network selection • 80  
Network services • 74  
Numbers  
SIM card • 165  
Low battery indicator • 22  
correcting • 27  
FDN • 165  
mode • 41 48  
,
192  
Index  
speed-dial • 60  
storing • 59  
Redialling  
automatically • 166  
Reset settings • 168  
Ringer  
O
incoming calls • 83  
messages • 84  
Options, select • 24  
Organiser • 134  
Road safety • 180  
Outbox • 93 103  
,
S
Safety  
P
Password  
batteries • 178  
explosive atmospheres •  
183  
barring • 78  
,
176  
174  
phone • 164  
,
Personal Identification  
Number • 174  
Phone  
information • 177, 184  
operating environment •  
180  
layout • 10  
settings • 160  
precautions •  
road • 180  
7
switching on/off • 23  
Phonebook • 56  
Second call, answer• 37  
Security settings • 163  
Service directory, dial • 68  
Settings  
copying numbers • 58  
deleting numbers • 58  
editing numbers • 58  
erasing numbers • 58  
memory status • 68  
sending SMS • 58  
storing numbers/names  
alarm • 142  
date • 140  
display • 160  
network • 74  
phone • 160  
reset • 168  
security • 163  
sound • 83  
text language • 162  
time • 140  
59  
PIN • 174  
changing • 163  
checking • 163  
PIN2 • 175  
changing • 165  
Power on/off tone • 85  
Preset messages • 107  
Problem, solve • 171  
PUK • 175  
SIM card  
dialling numbers • 62  
inserting • 18  
locking • 165  
removing • 19  
SMS • 88  
PUK2 • 175  
Soft keys, use • 24 25  
,
Sound settings • 83  
Speed-dialling • 60  
Stopwatch • 150  
Switching on/off  
Q
Quiet mode • 86  
microphone • 32  
phone • 23  
Symbolic mode • 41, 48  
R
Received calls • 70  
193  
Index  
T
T9 mode • 41  
Text  
,
43  
entering • 41  
input modes • 41  
language • 162  
Time  
setting • 140  
world • 140  
Timer • 149  
To do list • 139  
Tone  
connection • 85  
keypad • 86  
message • 84  
power on/off • 85  
Travel adapter • 21  
V
Voiceclarity • 34  
Volume  
call ringer • 84  
earpiece • 31  
keys • 31  
W
Waiting call • 37 79  
,
WAP Browser • 115  
World time • 140  
WWW Services • 115  
194  
195  
196  

Transcend Information JetFlash 160 User Manual
Topcom SKYR@CER 8144827 User Manual
Toastmaster ME8TSB User Manual
Spirit 1776 User Manual
Seagate MEDALIST 2531 User Manual
SanDisk SDUFD2AB 0064 User Manual
Samsung GT I5800L Series User Manual
RCA SMARTSNOOZE RP5440 User Manual (1)
Panasonic CQ C7205U User Manual
Nokia 918 User Manual