Samsung SGH E620 User Manual

* Some of the contents of this manual may differ from your phone,

depending on the software installed or your service provider.

* Depending on your country, your phone and accessories may

appear different from the illustrations in this manual.

Printed in Korea

Code No.:GH68-06783A

English. 04/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency call

For more detailed safety information, see "Health and

safety information" on page 88.

Key in the emergency number for your present

location, then press

•

Camera and Camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Name card

•

Java

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

Enjoy Java™-based embedded

games and download new games.

Voice recognition

Just say a command to dial a

phone number or access a menu

function.

WAP browser

Access the wireless web and access

various services and current

information.

•

Voice recorder

Record memos or sounds.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

E-mail

Send and receive e-mails with images, video, and

audio attachments.

Use Phonebook .................................................... 15

Browse the web ................................................... 16

Send messages.................................................... 17

View messages .................................................... 18

Use Bluetooth...................................................... 20

Contents

Your phone

Buttons, features, and locations

Unpack

Enter text

AB, T9, Numeric, and Symbol mode

Call functions

Make sure you have each item

Get started

Advanced calling features

Menu functions

First steps to operate your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 13

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

Begin with your camera, messages, and other special

features

Use camera......................................................... 14

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

8 Camera

9 Settings

ꢀ

p.66

p.73

3 Applications

ꢀ

p.35

5 Messages

ꢀ

p.45

1 Call records

ꢀ

p.29

1 Java world

2 Voice recorder

3 World time

4 Alarm

ꢀ

p.35

p.36

p.38

p.39

p.40

p.41

p.42

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀ

p.45

p.48

p.54

p.59

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀ

p.29

p.30

ꢀ

1 Time & Date

ꢀ

p.73

p.74

p.75

p.77

p.80

p.83

p.84

p.85

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Connection settings

9 Reset settings

5 PIM sync

6 Voice commands

7 Calculator

8 Converter

9 Timer

6 Memory status

6 Call time

7 Call cost^*

6 File manager

ꢀ

p.59

2 Phonebook

ꢀ

p.31

Images

Videos

Sounds

Other files

Memory status

ꢀ

p.60

p.61

p.62

1 Contacts list

2 Add new contact

3 Group

ꢀ

p.31

p.32

p.33

p.34

p.35

0 Stopwatch

4 Browser

ꢀ

p.43

1 Home

2 Bookmarks

3 http://

4 WAP profile

5 Clear cache

ꢀ

p.43

p.44

p.45

4 Speed dial

* Shows only if supported by your

SIM card.

5 My name card

6 Own number

7 Management

8 Service number*

7 Calendar

8 Camera

ꢀ

p.62

p.66

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Travel charger

Phone

Flash

Navigation

Camera

keys(Up/Down/

Left/Right)

Camera key

External

display

WAP access/

Confirm key

Soft key (right)

Headset jack

User’s manual

Battery

Soft key (left)

Volume keys

Dial key

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Correct key

Microphone

Alphanumeric

keys

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Special

function keys

Install the battery.

Plug the travel charger

into the phone.

Get started

First steps to operate your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the charger into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

The LED on the charger indicates the charging

progress:

•

Red: the battery is being charged.

Green: the battery is completely charged.

Orange: the battery is not correctly plugged in

or is operating at a too high or too low

temperature.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

When the phone is completely charged (green

charger LED), unplug the charger from the power

outlet.

Switch on

1. Open the phone.

Remove the charger from the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

use is prohibited.

press <OK>.

1. Open the phone.

Switch off

Low battery indicator

2. Press and hold [

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

Ends a call.

Hold down to switch the phone on and off.

In Menu mode, cancels input and returns

the phone to Idle mode.

Perform the function indicated on the

bottom line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

In Idle mode, access the following menu

options directly:

•

Up: My devices

voicemail server. Hold [

0] down to enter an

Down: Name dial

Left: Text message

Right: Incoming call

international prefix.

Enter special characters.

Hold [ ] down to insert a pause between

In Menu mode, scroll through the menu

options.

numbers. Hold [

]

down to activate or

deactivate Quiet mode.

In Idle mode, launches the Wireless

Application Protocol (WAP) browser.

Adjusts the phone volume.

In Menu mode, selects the highlighted menu

option.

In Idle mode, with the phone open, adjusts

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

(on the left)

Sends or answers a call.

In Idle mode, retrieves the recent numbers

dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

In Camera mode, takes a photo or records a

video.

(on the right)

Deletes characters from the display.

Get started

Display

Layout

Icons

(continued)

Call diverting feature is active

Bluetooth feature is active

Connected to hands-free or headset

Synchronised with a PC

GPRS network

Icons

display various icons.

Text and graphics

display messages,

instructions, and

Roaming network

information you enter.

Home Zone, if you have registered

for the appropriate service

Soft key function indicators

show the current functions

assigned to the two soft

keys.

Contacts

Call ringer set to vibrate

Icons^*

Mute mode is active during a call

Quiet mode is active (Vibration)

Received signal strength

Call in progress

Quiet mode is active (Mute)

Alarm set

Out of your service area; you cannot

send or receive calls

New message

Battery power level

New e-mail message

New voicemail

* The icons shown on the display may vary, depending

on your country or service provider.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

Contacts

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

•

Press [

mode.

] to return to Idle

Press the right soft

key to access

Contacts list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

2. Select an image category.

3. Select an image and press

Idle mode

wallpaper

(continued)

1. In Idle mode, press <Menu

Display

<Select>.

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

4. Press <Save>.

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

2. Select a ringer category.

3. Select a ringer melody.

4. Press <Save>.

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

Quiet mode

You can set a wallpaper for the

main or external display.

Idle mode

wallpaper

Press and hold

[

]

in Idle mode.

1. In Idle mode, press <Menu

and select Settings

→

settings Wallpaper

→

display or Cover display

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password.

Phone lock

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

[

→

[

→

1. When the phone is ringing, press

Answer a call

[

“00000000” and press <OK>.

2. To end the call, press

[

3. Enter a new 4- to 8- digit

password and press <OK>.

Press [ ].

Adjust the

volume during

a call

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, messages, and other special

features

1. In Capture mode, press the left

View a photo

soft key and select Go to

photos

2. Press [Left] or [Right] to select

a photo category.

Use camera

3. Select the photo you want.

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

1. In Idle mode, press and hold

Record a video

[

]

to turn on the camera.

[

] to turn on the camera.

3. Aim the lens at the subject and

adjust the image.

2. Press [1] to switch to Record

mode.

4. Press

[

] to take a photo. The

3. Press

4. Press

[

] to start recording.

photo is saved automatically.

[

] to stop recording. The

5. Press <Preview> to take

video is saved automatically.

another photo.

5. Press <Preview> to record

another video.

1. In Record mode, press the left

To the SIM card

Play a video

Add an entry

(continued)

soft key and select Go to

1. In Idle mode, enter a phone

videos

number and press <Options>.

2. Press [Left] or [Right] to select

a video category.

2. Select Save contact

→

SIM.

3. Enter a name.

3. Select the video you want.

4. Press <Save> to save the

entry.

Use Phonebook

1. In Idle mode, press

Find an entry

To the phone’s memory

Add an entry

<Contacts>.

1. In Idle mode, enter a phone

2. Select an entry.

number and press <Options>.

3. Select a number and press

2. Select Save contact

a number type.

→

Phone

[

]

to dial, or press

→

Options> to access options.

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

4. Press <Save> to save the

entry.

Step outside the phone

Browse the web

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

Using a built-in WAP (Wireless Application Protocol)

browser, you can get easy access to the wireless web

to get a variety of up-to-date services and information

and to enjoy download of web content.

→

2. Specify your contact

information.

3. Press <Save> to save the

In Idle mode, press [ ].

Launch the

browser

name card.

4. To send the name card to other

•

To scroll through browser items,

press [Up] or [Down].

people, press <Options> and

Navigate with

the WAP

browser

select Send

→

SMS/MMS/

Email Bluetooth

To select an item, press

<Options> and select Select.

To return to the previous page,

press <Options> and select

Back

•

To access browser options,

press <Menu>.

Send messages

4. Select Picture&Video or

Send a

multimedia

message

(MMS)

(continued)

Sound and add a media file.

Send a text

message (SMS)

1. In Idle mode, press <Menu

For Picture&Video, select Add

image or Add video to add a

photo or video clip.

and select Messages

message Text message

2. Enter the message text.

3. Press <Options> and select

→

Create

→

For Sound, select Add sound

to add a sound clip.

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

5. Select Message

6. Enter the message text and

press [ ].

7. Press <Options> and select

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

Send

→

multimedia

message

(MMS)

message

→

8. Enter destination numbers.

9. Press [ ] to send the message.

2. Select Subject

3. Enter the message subject and

press [ ].

Step outside the phone

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messages

message Email

2. Select Subject

→

Create

View a text

message

When a notification appears:

→

1. Press <View>.

2. Select a message from the

Inbox.

3. Enter the e-mail subject and

press [ ].

From the Inbox:

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

1. In Idle mode, press <Menu

and select Messages

messages Inbox

2. Select a message.

→

[

→

7. Add image, video, or sound

files.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10. Press [ ] to send the e-mail.

When a notification appears:

1. Press <View>.

1. In Idle mode, press <Menu

and select Messages My

messages Email box

2. Select an account.

View an e-mail

View a

multimedia

message

→

2. Press <Options> and select

Retrieve

3. Press <Yes> when Check new

Email is displayed to retrieve

an e-mail or a header.

3. Select a message from the

Inbox.

From the Inbox:

4. Select an e-mail or a header.

5. If you selected a header, press

1. In Idle mode, press <Menu

and select Messages

messages Inbox

2. Select a message.

→

Options> and select

→

Retrieve

Step outside the phone

Use Bluetooth

1. Access an application.

2. Scroll to an item.

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

5. If necessary, enter the

→

Bluetooth PIN and press <OK>.

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

Search new device

If necessary, press <Yes> to

confirm the reception.

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

Enter text

AB, T9, Numeric, and Symbol mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Numeric mode, and Symbol mode.

Entering a word in T9 mode

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

5], [5], and [6] to

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

T9 predicts the word that you are typing, and it

may change with each key that you press.

•

Press and hold [ ] to switch between T9 and AB

modes. Depending on your country, you may also

be able to access an input mode for your specific

language.

2. Enter the whole word before editing or deleting

characters.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

•

Press [ ] to change case or switch to Numeric

mode.

Press and hold [ ] to switch to Symbol mode.

4. Press [ ] to insert a space and enter the next

word.

Enter text

Tips for using T9 mode

Using AB mode

Press the appropriate key until the character you want

appears on the screen.

•

Press [1] to enter periods or apostrophes

automatically.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Characters in order displayed

Key

Upper case

Lower case

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

4. Enter the word you want using AB mode and press

Tips for using AB mode

<OK>.

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

•

Press [ ] to insert a space.

•

Press the Navigation keys to move the cursor.

Press [ ] to delete characters one by one. Press

and hold [ ] to clear the display.

Call functions

Advanced calling features

Using Numeric mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Numeric mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [

Press

[

C] to clear the last digit or press and hold

Using Symbol mode

Symbol mode enables you to insert symbols.

[C]

to clear the whole display. You can move the

cursor to edit an incorrect digit.

Press and hold [ ] to enter Symbol mode.

Making an international call

1. In Idle mode, press and hold [

Press

0]. The

character

appears.

display more symbols

select a symbol

[Up] or [Down].

2. Enter the country code, area code, and phone

number, then press [ ].

the corresponding

number key.

Redialling recent numbers

clear the entered symbol(s)

insert the symbol(s)

[

1. In Idle mode, press [

recent numbers.

] to display the list of

OK>.

2. Scroll to the number you want and press [

Call functions

Making a call from Phonebook

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.ꢀp. 31

Press <Accept> or [

] to answer the call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

keys.

ꢀp. 33

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

Reject> or [

When Active folder in the Extra settings menu

is active, you can simply open the phone. p. 74

Press <Reject> or [ ] to reject a call.

].ꢀp. 74

ꢀ

2. Press [Left] or [Right] to scroll through other

numbers.

•

With the phone closed, press and hold [

reject a call.

] to

3. Press <Dial> or [

] to dial the number you

want.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

Ending a call

Close the phone or press [

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [

] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Connect the headset to the jack on the left side of the

phone.

Making a second call

The buttons on the headset work as listed below:

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [

Options during a call

You can access a number of functions during a call.

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Adjusting the volume during a call

activated the call waiting feature.

ꢀp. 78

Use [

] to adjust the earpiece volume during a call.

Call functions

1. Press [

] to answer the call. The first call is

Using a Bluetooth headset

automatically put on hold.

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 80

the call on hold.

4. To end the current call, press [

Transferring a call

Using the menu options

You can access Menu mode and use menu functions.

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

During a call, some menu functions are not

available.

Press <Options> and select Transfer

Press <Options> and select Menu

Using the speaker phone

You can use the phone as a speaker phone to talk and

listen with the phone a short distance away.

Switching off the microphone (Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

1. During a call, press and hold [ ] to listen and talk

to the other person hands-free.

Press <Options> and select Mute or Unmute

2. Press [ ] again to return to normal phone mode.

Muting or sending key tones

Using Phonebook

You can turn the key tones off or on.

You can access the Phonebook menu to locate or

store entries.ꢀp. 31

Press <Options> and select Mute keys or Send

keys

Press <Options> and select Phonebook.

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Using SIM services

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

For details, see your SIM card instructions or contact

your service provider.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

Making a multi-party call

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Your service provider must support multi-party calls

for you to use this feature.

1. When connected with a teleservice system, press

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Call functions

Setting up a multi-party call

Dropping one participant

1. Call the first participant.

1. Press <Options> and select Remove.

2. Call the second participant. The first call is

automatically put on hold.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

3. Close the phone or press [

party call.

] to end the multi-

4. If desired, call another person or answer an

incoming call.

5. Press <Options> and select Join

6. Repeat steps 4 and 5 as desired.

Having a private conversation with one

participant

1. Press <Options> and select Private

2. Select a name or number from the participant list.

You can talk privately with that person, while the

other participants converse with each other.

3. To return to the multi-party call, press <Options

and select Join

Using call record options

Menu functions

While viewing the call list, press <Options> to access

All menu options listed

the following options:

•

Detail: show the details of the selected call.

Paste: edit the phone number.

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

Save contact: save the number to Phonebook.

Send message: send an SMS or MMS message.

Delete: delete the selected call record or all

records.

To access this menu, press <Menu> in Idle mode and

select Call records

Missed calls (Menu 1.2)

Current contacts (Menu 1.1)

This menu displays the most recent calls that you did

not answer.

This menu displays the most recent calls dialled,

received, or missed.

Dialled calls (Menu 1.3)

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

This menu displays the most recent calls you have

dialled.

3. Press [ ] to view the details of a call, or [

dial a number.

] to

Menu functions

To reset the call timers, press <Reset>. You need to

enter the phone password.

Received calls (Menu 1.4)

This menu displays the most recent calls you have

received.

The password is preset to 00000000. You can

change this password.

ꢀp. 83

Delete all (Menu 1.5)

Call cost (Menu 1.7)

Use this menu to delete all of the records in each call

type.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

1. Press [ ] to check the call type(s) to be cleared.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Call time (Menu 1.6)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

•

Max cost: check the maximum cost limit set in

•

Last call time: check the length of your last call.

Set max cost

Total sent: check the total length of all the calls

you have dialed.

Reset counters: reset the cost counters. You

need to enter your PIN2.

•

Total received: check the total length of all the

calls you have received.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

2. Select the name you want from the list.

3. Press [ ] to dial the number, or <Options> to

access Phonebook options.

Using Phonebook options

Phonebook (Menu 2)

While viewing the contact list or contact details, press

Options> to access the following options:

View: display details about the contact.

Edit: edit the contact information.

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Send message: send an SMS, MMS, or e-mail

message.

To access this menu, press <Menu> in Idle mode and

select Phonebook

•

Add new contact: add a new contact to

Phonebook.

Contacts list (Menu 2.1)

Copy to: copy the contact to the phone’s memory

or the SIM card.

Use this menu to search for numbers in Phonebook.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Press <Contacts> in Idle mode to quickly access

this menu.

Delete: delete the selected contact or all contacts.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Menu functions

Storing a number on the SIM card

1. Select SIM and enter a name.

Add new contact (Menu 2.2)

Use this menu to add a new contact to Phonebook.

2. Press [Down] and enter a phone number.

Storing a number in the phone’s memory

3. Press [Down] and change the location number, if

necessary.

1. Select Phone

2. Change the settings or enter information about the

contact.

4. Press <Save> to save the contact.

•

First name

Mobile Home

number in any category.

Last name: assign a name.

Group (Menu 2.3)

Office Fax Other: add a

Use this menu to organise your contacts in caller

groups.

•

Email: assign an e-mail address.

Creating a new caller group

1. Press <Options> and select Add

Caller ID: assign an image as a caller ID

image to alert you to a call from the number.

Ringtone: assign a ringer melody to alert you

to a call from the number.

Group: assign the number to a caller group.

Memo: add a memo about the person.

•

2. Enter a name for the group.

3. Select the Caller ID line and select an image.

4. Select the Ringtone line and select a melody.

5. Press <Save> to save the group.

•

3. Press <Save> to save the contact.

Adding members to a caller group

Speed dial (Menu 2.4)

1. Select a group.

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

2. Press <Add>. The list of contacts stored in your

phone’s memory is displayed.

Assigning speed dial numbers

3. Press [ ] to select specific contacts you want to

1. Select a key location from

9. Key [1] is

add to the selected group and press <Select>.

reserved for your voice mail server.

4. To add more members, press <Options> and

2. Select the contact you want from the contact list.

select Add

→

a contact.

Managing speed dial entries

5. Repeat step 4 as desired.

From the Speed dial screen, press <Options> to

access the following options:

Managing caller groups

While viewing the group list or a group details, press

•

Add: assign a number to an unassigned key.

Options> to access the following options:

View: display the members of the selected group.

Add: add a new group.

View: show the number assigned to the key.

•

Change: assign a different number to the

assigned key.

•

Edit: change the properties of the selected group.

•

Remove: clear the speed dial setting for the

selected key.

•

Send message: send an SMS, MMS, or e-mail

message to the member(s) you want.

Dialling speed dial entries

•

Delete: delete the selected group or all groups.

Group members, however, are not deleted from

Phonebook.

Press and hold the appropriate key in Idle mode.

Menu functions

My name card (Menu 2.5)

Own number (Menu 2.6)

Use this menu to create a name card and send it to

other people.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

Management (Menu 2.7)

phone’s memory.ꢀp. 32

Use this menu to manage Phonebook.

Using name card options

•

Default saving: select a default memory location

to save contacts.

After saving your name card, press <Options> to

access the following options:

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

•

Edit: edit the name card.

Send: send the name card via SMS, MMS, e-mail,

or Bluetooth.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

•

Exchange name card: exchange name cards with

another person via Bluetooth.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Delete: delete the name card.

1. Press [ ] to check the location(s) to be

cleared.

2. Press <Delete>.

3. Enter the phone password and press <OK>.

Applications (Menu 3)

The password is preset to 00000000. You

Use this menu to play Java games, to record a voice

memo, to set time zones and alarms, to use the voice

recognition feature, or to use the phone as a

calculator, timer, or stopwatch. You can also

synchronise Phonebook or calendar data in the

phone’s memory with a computer.

can change this password.ꢀp. 83

4. Press <Yes> to confirm the deletion.

•

Memory status: display the number of contacts

you have stored in Phonebook.

To access this menu, press <Menu> in Idle mode and

Service number (Menu 2.8)

select Applications

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

Your phone may not support certain sound formats.

This may affect the play of some downloaded

content, such as certain Java games or sound files.

Java world (Menu 3.1)

1. Scroll to the number you want and press <View>.

Use this menu to access and play Java games and to

select a profile for accessing Java services.

2. Press <Dial> or [

Using Java game options

From the Java world screen, select Downloads and

press <Options> to access the following options:

•

Launch: launch the selected game.

Menu functions

•

Delete: delete the selected game or all games,

except for embedded games.

From the Java world menu, select Memory status.

Voice recorder (Menu 3.2)

•

Properties: view the properties of the game.

Use this menu to record voice memos.

Upgrade: update the game from the appropriate

website.

Recording a voice memo

•

Protection: protect the game from being deleted.

1. Press [ ] to start recording.

2. Speak into the microphone.

Press [ ] to pause or resume the recording.

Send information: send game information to

other people via SMS.

Accessing Java settings

3. When you finish, press [Down]. The voice memo is

saved automatically.

You can select a connection profile for accessing Java

services.

4. Press [Up] to record another voice memo, or press

<Options> to access the following options:

From the Java world menu, select Settings and then

a profile.

•

Play: play back your voice memo.

Record: record another voice memo.

Go to voice list: display the voice memo list.

Send via: send the voice memo via MMS,

e-mail, or Bluetooth.

You can edit a profile using the Connection

settings menu.

ꢀp. 84

Checking memory status

You can view the amount of total memory for the Java

games as well as the amount of available and used

memory. You can also view the number of downloaded

games.

•

Delete: delete the voice memo.

Rename: change the name of the voice memo.

•

Protection: protect the voice memo from

being deleted.

Properties: view the properties of the voice

memo.

Using voice memo options

From the Voice recorder screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Playing a voice memo

Go to voice list: go to the list of voice memos you

1. From the Voice recorder screen, press <Options

have recorded.

and select Go to voice list

•

Setting: select a recording time setting.

2. Select a voice memo. The memo plays.

During playback, use the following keys:

Limit for MMS: record a voice memo for adding to

an MMS message.

Limit for Email: record a voice memo for adding

to an e-mail.

Keys

Function

[

]

Pauses or resumes playback.

Moves backward.

Moves forward.

Max record time: record a voice memo for up to

about 7 minutes.

[Left]

[Right]

[Down] or

Stops playback.

<Stop>

[

]

Adjusts the volume.

Menu functions

World time (Menu 3.3)

Alarm (Menu 3.4)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Use this menu to set alarms to sound at specific times.

Setting an alarm

1. Select the type of alarm.

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

2. Press [Left] or [Right] to select On on the Alarm

line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

2. Press <Options> and select Save to save the

4. Select AM or PM in 12-hour time format and press

time zone.

[Down].

Applying Daylight Savings Time

5. Select a repeat option.

1. From the world map, press <Options> and select

6. Select the Alarm tone line and select an alarm

Set daylight saving time

melody.

2. Press [ ] to check the time zone(s) you want.

7. Press <Save>.

3. Press <Save>.

Stopping an alarm

•

When an alarm sounds, press <Exit> or any key

to stop the alarm.

•

When a wake-up call alarm sounds, press

Confirm> or [ ] to stop the alarm.

•

Sync category: select the applications you

want to synchronise.

•

Sync type: select a synchronisation type.

Sync protocol: select a connection method.

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

4. Press <Save> to save the profile.

Setting the alarm to ring even if the phone is

off

Starting synchronisation

1. Make sure that your PC has MS Outlook and the

WideSync program installed, and the phone and

the PC are connected by a USB cable or an active

Bluetooth connection.

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

2. Open MS Outlook.

PIM sync (Menu 3.5)

3. From the PIM sync screen, select a profile.

4. Press [ ].

Use this menu to synchronise personal data with

corresponding PC applications via the optional

WideSync program.

Using synchronisation options

From the PIM sync screen, press <Options> to access

the following options:

Creating a synchronisation profile

1. Press <Add>.

•

Start sync: start a synchronisation for the

selected profile.

2. Enter a profile name and press [Down].

3. Specify the following information for the profile:

•

View result: show the result of the last

synchronisation.

Menu functions

•

New sync profile: add a new profile.

2. Say “Next” following the voice prompt, until you

hear the name you want.

•

Edit sync profile: change the properties of the

profile.

To go back to the name or item recited previously,

say “Previous.”

•

Delete: delete the selected profile or all profiles.

3. When you press [ ] or say nothing for 3 seconds,

the phone dials the currently selected number.

Voice commands (Menu 3.6)

Your phone provides a set of powerful voice-enabled

features that enhance its hands-free capabilities.

Name search (Menu 3.6.2)

Use this menu to access the Phonebook entry you

want by saying an entry name.

Your phone recognises only English, French,

German, Italian, and Spanish.

The procedures for name searching are the same as

for name dialling.

Name dial (Menu 3.6.1)

Direct menu (Menu 3.6.3)

Use this menu to make a phone call by saying the

name that has been assigned to Phonebook. You can

quickly access this menu by pressing [Down] in Idle

mode.

Use this menu to access main menus, as well as the

Name dial and Name search menus directly by

saying the name of the menu you want.

1. Say a name into the microphone.

1. Say the name of the menu you want to open.

If there are similar names, the phone displays the

3 best results and then recites the name that most

closely matches your command.

2. If the phone finds several menus, proceed from

step 2 in the Name dial menu.

3. When you press [ ] or say nothing for 3 seconds,

the phone automatically opens the selected menu.

Settings (Menu 3.6.4)

Help (Menu 3.6.5)

Use this menu to customise various settings for the

voice recognition feature.

Use this menu to view the instructions on the voice

recognition feature and customising its settings.

•

Voice commands: enable or disable the voice

command feature.

Calculator (Menu 3.7)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

Command timeout: set a time limit for your

phone to wait for your voice commands.

Result display: set how many candidates the

phone displays after searching for the best match

for your voice command.

1. Enter the first number.

Press the left soft key to insert a decimal point or

bracket.

•

Voice guides: turn on or off the voice messages

that guide you through the voice command

procedure.

To move the cursor, press

[

] or [

2. Press one of the Navigation keys to access the

math function you want.

•

Guides volume: adjust the volume for the voice

guide messages.

3. Enter the second number.

Sensitivity level: adjust the sensitivity with

which your phone recognises a voice command.

4. Press [ ] to view the result.

Activate names: activate or deactivate

Phonebook entries to be dialled or accessed by

voice command.

Menu functions

Converter (Menu 3.8)

Timer (Menu 3.9)

Use this menu for common conversions, such as

currency and temperature.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Starting the timer

1. Press <Set>.

3. Enter the value to be converted and press [Down].

2. Enter the length of time you want to count down

and press <OK>.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

3. Press [ ] to start counting down.

Stopping the timer

For the currency converter, you can view and

set up the rates by pressing <View rate>.

•

Press <Exit> or any key when the timer rings.

Press [ ] on the Timer screen to stop the timer

before it rings.

4. Press [Left] or [Right] to select the unit you want

to convert to.

Stopwatch (Menu 3.0)

The equivalent value for the amount you entered

displays.

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

1. Press [ ] to start the timer.

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

Navigating with the WAP browser

Press

3. To reset the stopwatch, press <Reset>.

scroll through browser items

select a browser item

[Up] or [Down].

<Options> and

Browser (Menu 4)

select Select

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-date

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

return to the previous page

Options> and

select Back

Using WAP page options

From any WAP page, press <Menu> to access the

following options:

To access this menu, press <Menu> in Idle mode and

select Browser

•

Bookmarks: display the Bookmarks list.

Reload: reload the current page.

Home (Menu 4.1)

Home: go back to the home page.

Go to URL: enter a URL address manually.

Use this menu to connect your phone to the network

and load the home page of the wireless web service

provider. You can also press [ ] in Idle mode.

Show URL: display the URL address of the current

web page. You can also set the current page as the

home page for the WAP browser or a bookmark.

Menu functions

•

Clear cache: clear the cache memory.

Using bookmark options

•

Inbox: access WAP push messages in the WAP

browser.

After saving an item, press <Options> to access the

following options:

Show images: display images on the current

page.

•

Go to URL: access the bookmarked website.

Edit: edit the address and name of the bookmark.

Certificates: display the WAP browser certificate.

Delete: delete the selected bookmark or all

bookmarks.

Exiting the WAP browser

Press [ ] to exit the browser.

http:// (Menu 4.3)

Bookmarks (Menu 4.2)

Use this menu to manually enter the URL address of a

website and access the website.

Use this menu to save URL addresses in order to

quickly access websites.

WAP profile (Menu 4.4)

Adding a bookmark

1. Select an empty location.

Use this menu to select a connection profile for

accessing the WAP browser.

2. Enter a name for the bookmark and press [Down].

3. Enter a URL address and press <Save>.

You can edit a profile using the Connection

settings menu.ꢀp. 84

Accessing a bookmarked page

Scroll to a bookmark item and press [ ].

Clear cache (Menu 4.5)

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

1. Enter your message.

Messages (Menu 5)

2. Press <Options> to access one of the following

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use the WAP push message, and cell

broadcast message features.

options:

•

Save and send: both save a copy of the

message and send the message.

Send only: send the message.

Insert: add a template, Phonebook entry, or

bookmark.

•

To access this menu, press <Menu> in Idle mode and

select Messages

•

Add picture/animation/melody: attach a

Create message (Menu 5.1)

picture, animated image, or melody.

Attach: attach a name card or calender data

as a data format attachment.

Save to: save the message in the Drafts box

or one of the folders you have created.

Language select: change the language used

in T9 input mode.

Use this menu to create and send SMS, MMS, or

e-mail messages.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

Menu functions

•

Text style: change the text attributes.

Input method: change the text input mode.

4. Select the Message line.

5. Enter the message text and press [ ].

6. Press <Options> to access the following options:

3. When you have finished, press <Options> and

select Save and send or Send only

•

Edit: edit the subject or text of your message.

Add image video sound: add photos, videos,

4. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

or sounds to the message. Depending on the file

type or DRM (Digital Rights Management) system,

some files may not be able to be forwarded

•

Change image/video/sound: change an

added item.

Preview: display the message you have

created.

Send: send the message.

Save to: save the message in the Drafts box

or one of the folders you have created.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

5. Press [ ] to send the message.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

1. Select the Subject line.

2. Enter the message subject and press [ ].

•

3. Select the Picture&Video or Sound line and add

an image, a video, or a sound file.

•

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward.

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

•

Attach: attach a name card or calender data

as a data format attachment.

Clear subject/message: clear the subject or

text.

Remove media/sound: remove an added

item.

3. Select the Message line.

4. Enter the e-mail text and press [ ].

5. Press <Options> to add multimedia files by

selecting the following options in the File attach

line:

•

Add image/video/sound: add items stored in

the phone’s memory. Depending on the file type

or DRM (Digital Rights Management) system,

7. When you have finished, press <Options> and

select Send

8. Enter a destination number.

some files may not be able to be forwarded.

•

Other files: add files in a format which your

phone does not support.

Attach: attach a name card or calender data

as a data format attachment.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

9. Press [ ] to send the message.

6. When you have finished, press <Options> to

Email (Menu 5.1.3)

access the following options:

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

Options may vary depending on the selected

field.

profile.

ꢀp. 58, p. 58

•

Edit: edit the subject or text.

View Play: display/play an added item.

Send: send the e-mail.

1. Select the Subject line.

2. Enter the subject of your e-mail and press [ ].

Menu functions

•

Save to: save the message in the Drafts box

or one of the folders you have created.

Remove subject/message: clear the subject

My messages (Menu 5.2)

Use this menu to store all of the messages you have

received, sent, or failed to send.

or text.

Inbox (Menu 5.2.1)

Remove attachment: delete the selected

attachment.

Remove all attachment: delete all

attachments.

This folder stores all of the messages you have

received, except for e-mails.

Viewing a message at the time of its receipt

7. When you have finished, press <Options> and

select Send

When a message has been received, the phone alerts

you by:

8. Enter an e-mail address.

•

Displaying a message icon with text notification

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

Sounding a tone or vibrating, depending on the

message alert setting.

To read a message immediately, press <View> and

select a message from the Inbox.

9. Press [ ] to send the e-mail.

For an MMS notification, press <Options> and select

Retrieve. The message is downloaded from the MMS

server to the phone’s memory.

While viewing the message list, press <Options> to

access the following options:

Viewing a message in Inbox

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

Options may vary depending on your country or

service provider.

•

SMS

•

View: open the message.

MMS

Retrieve: retrieve the MMS message from the

server.

MMS notification;

indicates that MMS has

been retrieving from the server and

indicates that MMS has been failed to

retrieve.

•

Delete: delete the message.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

WAP push messages/OTA messages

CB messages

•

Sort by: change the sort order of the messages.

Delivery report for your sent messages

Protection: protect the message from being

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

deleted.

Using message options

While viewing a message, press <Options> to access

the following options:

They are indicated by

• A icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

SMS messages

•

Reply: reply to the sender.

Menu functions

•

Forward: forward the message.

•

Cut media: save media content from the message

into your phone’s memory.

•

Delete: delete the message.

Protection: protect the message from being

deleted.

Move to phone/SIM: move the message between

the SIM card and the phone’s memory.

Properties: view the properties of the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

OTA messages

Cut media: save media content from the message

into your phone’s memory.

•

Install: apply the configuration specified in the

message to your phone.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

•

Delete: delete the message.

Properties: view the properties of the message.

WAP push messages

MMS messages

•

Go to URL: connect to the URL specified in the

message.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Forward: forward the message to another person.

•

Delete: delete the message.

Delete: delete the message or all messages.

Protection: protect the message from being

deleted.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

CB messages

•

Sort by: change the sort order of the messages.

•

Save: save the message to the phone’s memory.

Protection: protect the message from being

deleted.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

•

Properties: view the properties of the message.

•

Delete: delete the message.

Outbox (Menu 5.2.3)

Delivery report messages

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

In this folder, the following icons are available:

•

Delete: delete the message.

•

Message that the phone is sending

Protection: protect the message from being

deleted.

Message that the phone has failed to send

While viewing a message or the message list, press

Drafts (Menu 5.2.2)

<Options> to access the following options:

This folder stores messages you have saved to send at

a later time.

•

View: display the message.

•

Delete: delete the message or all messages.

Press <Options> to access the following options:

•

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

•

Edit: edit the message.

Delete: delete the message or all messages.

•

Sort by: change the sort order of the messages.

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

Send again: send the message.

Menu functions

•

Forward: forward the message to other people.

•

Protection: protect the message from being

deleted.

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Properties: view the properties of the message.

Protection: protect the message from being

deleted.

Email box (Menu 5.2.5)

This folder stores e-mails that you have received.

1. Select an e-mail account.

Properties: view the message properties.

Sent (Menu 5.2.4)

2. Press <Yes> when Check new Email is displayed

This folder stores messages that you have sent.

to get new mails from the server.

The phone checks for new e-mails and retrieves

received e-mails.

While viewing a message or from the message list,

press <Options> to access the following options:

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

•

View: open the message.

Send: send the message.

Delete: delete the message or all messages.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved;

Move to My folder: move the message to one of

the folders you have created in the My folders

menu.

indicates that

•

Sort by: change the sort order of the messages.

an e-mail has been retrieving from the

Forward: forward the message to other people.

server and

indicates that an e-mail has

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

been failed to retrieve.

•

Delete: delete the currently selected item.

icon next to a message means that a

message is of high priority. A grey-

coloured message icon is of low priority.

Move to My folder: move the e-mail to one of the

folders you have created in the My folders menu.

•

Add to filtering list: add the sender’s e-mail

address to the filter list to reject e-mails from that

address.

3. Scroll to an e-mail or header and press [ ].

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Press [Left] or [Right] to move to the first or last

page.

Cut media: save media content from the message

to your phone’s memory.

5. Select an attached file to view or play it.

While viewing the e-mail content or message list,

press <Options> to access the following options:

Check new Email: check the Email box for new

e-mails.

Options may vary depending on the status of the

e-mail.

•

Protection: protect the e-mail from being deleted.

Properties: view the properties of the e-mail.

•

View: open the selected item.

My folders (Menu 5.2.6)

Retrieve: retrieve one or all of the e-mails from

the e-mail server.

Use this menu to create new folders and store and

organise your messages.

•

Reply: send a reply to the sender or to all of the

other recipients.

Creating a new folder

1. Press <Yes>.

Forward: forward the e-mail.

2. Enter a folder name and press <OK>.

Menu functions

•

Send message: send a new message using the

template.

Using folder options

On the folder list, press <Options> to access the

following options:

•

Delete: delete the template.

Add new: add a new template.

•

Open: open the folder.

Add folder: add a new folder.

Delete all (Menu 5.4)

Rename folder: change the name of the folder.

Delete: delete the selected folder.

Use this menu to delete messages in each message

folder one by one, or all at once. You can also delete

all messages in all folders at one time.

Templates (Menu 5.3)

Use this menu to make and use templates of

frequently used messages.

Settings (Menu 5.5)

Use this menu to set up various options for using the

messaging service.

Creating a text template

1. Select an empty location.

Text message (Menu 5.5.1)

2. Enter a message and press <OK>.

You can configure default SMS settings for sending or

receiving messages.

Using template options

From the template list, press <Options> to access

•

Send settings: set up the following options for

the following options:

sending a text message:

•

Edit: edit the template.

Reply path: allow the recipient to reply to you

through your message centre.

Delivery report: set the network to inform you

when your message has been delivered.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-alphabet to Uni-code

if you enter a Uni-code character. Use of Uni-code

encoding will reduce the maximum number of

characters in a message to about half. If this menu

is not shown, your phone provides the Automatic

character encoding by default.

Default validity: set the length of time your

messages are stored in the SMS centre while

attempts are made to deliver them.

Setting name: enter a profile name.

Multimedia message (Menu 5.5.2)

You can configure default MMS settings for sending or

receiving messages.

Bearer selection: select either GSM or GPRS

•

Send settings: set up the following options for

sending a multimedia message:

preferred, depending on your network.

•

Current profile: select a profile.

Delivery report: set the network to inform you

when your message has been delivered.

Profile settings: set the following properties in a

profile:

Hide address: set your address to be hidden from

the recipient’s phone.

Service centre: store or change the number of

your message centre.

Read reply: determine whether or not the phone

sends a read-reply request.

Default destination: enter the default

destination. It will be displayed in the first field on

the Recipients field.

Priority: set the priority level of your messages.

Menu functions

Expiry date: set the length of time your messages

are stored in the message centre.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Delivery time: set a time delay before messages

are sent.

Home reception and Roaming reception have the

following options:

Outgoing message size: select a maximum size

of attached items allowed for an MMS message.

•

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Automatic: the phone automatically retrieves

messages from the server.

•

Retrieve settings: set up the following options

for receiving a multimedia message:

•

Reject unknown sender: reject messages from

unknown senders.

Reject: the phone rejects all messages.

Advert allowed: accept advertisements.

•

Profile: select a connection profile to be used for

MMS.

Information allowed: accept information

messages.

You can edit a profile using the Connection

Personal allowed: accept personal messages.

settings menu.ꢀp. 84

Report allowed: send a delivery report from the

network to the sender.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

•

Receive settings: set up the following options for

receiving an e-mail:

Email (Menu 5.5.3)

You can configure default network settings that are

required to send or receive e-mails.

Check interval: determine how often the phone

checks the server for incoming e-mails.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

If you set this option to Do not notify, you can

use the Check new Email feature to check your

e-mail manually.

•

Send settings: set up the following options for

sending an e-mail:

Read reply: determine whether or not the phone

sends a read-reply request.

Delivery report: set the network to inform you

when your e-mail has been delivered.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

Reply to address: set the network to send a

request for a reply along with your e-mail to the

recipient.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Priority: select the priority level of your e-mail.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mail.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

Edit name: edit the name in your signature.

•

Block list: specify e-mail addresses or subjects to

reject messages from the address or containing

the subjects.

Edit telephone number: edit the phone number

in your signature.

Edit note: edit the tag line in your signature.

Menu functions

•

Email account: set up an e-mail account and

select an account to be used.

•

POP3 server: enter the IP address or domain

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using

the APOP login scheme when this option is

selected.

•

Current account: select an account.

Account settings: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

These options are available when the protocol type

is IMAP4

•

Account name: enter a name for the currently

selected account.

•

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

•

User name: enter a user name.

Email address: enter your e-mail address.

User ID: enter your e-mail ID.

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Email retrieval limit: set the number of

headers you will retrieve from the server.

•

Email profile: select a connection profile to be

used for e-mail services.

You can edit a profile using the Connection

settings menu.ꢀp. 84

The following options are available when the

protocol type is POP3

Push message (Menu 5.5.4)

Memory status (Menu 5.6)

You can change the settings for receiving WAP push

messages from the wireless web server. The following

options are available:

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

•

Receive: set how your phone receives push

messages.

File manager (Menu 6)

The File manager menu allows you to access image,

video, sound, and other files stored in the phone’s

memory.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

specific

To access this menu, press <Menu> in Idle mode and

Broadcast (Menu 5.5.5)

select File manager

You can change the settings for receiving CB

messages. The following options are available:

According to the DRM (Digital Rights Management)

system, web content may not be able to be

•

Receive: select the reception of CB messages.

forwarded. The content is indicated by

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

•

Language: select the preferred language in which

broadcast messages display.

Menu functions

Using video options

Images

While viewing the video list, press <Options> to

access the options.

This menu displays photos you have taken and images

downloaded or received in messages.

•

Play: play the video clip.

Viewing an image

1. Select an image folder.

2. Scroll to an image and press [ ].

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

•

Set as wallpaper: set the video clip, if saved for

adding to MMS messages or e-mails, as your

wallpaper for the idle screen.

Using image options

While viewing an image or the image list, press

Options> to access the options.

ꢀp. 69

•

Delete: delete the video clip.

Rename: change the name of the video clip.

Videos

Move to Favourite videos: go to the Favourite

This menu displays video clips you have recorded,

downloaded, or received in messages.

videos folder.

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

•

Protection: protect the video clip from being

deleted.

Playing a video clip

1. Select a video folder.

Properties: view the properties of the video clip.

2. Scroll to a clip and press [ ].

ꢀp. 72

•

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Sounds

This menu displays sound files you have recorded,

downloaded, or received in messages.

•

Protection: protect the file from being deleted.

Playing a sound clip

1. Select a sound folder.

2. Scroll to a clip and press [ ].

Properties: view the properties of the file.

Other files

Using sound options

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot display these files on the phone. Unsupported

file formats include *.doc, *.ppt, and *.txt.

While viewing the sound list, press <Options> to

access the following options:

•

Play: play the sound file.

While viewing the file list, press [ ] to access the

following options:

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Send via: send the file via e-mail, or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the file name.

•

Set as: set the file as your ringtone or as a caller

alert melody for a Phonebook entry.

•

Delete: delete the selected file or all files.

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Rename: change the file name.

Move to Favourite sounds: move the file to the

Favourite sounds folder.

•

Protection: protect the file from being deleted.

Properties: view the properties of the file.

Menu functions

Memory status

•

Scheduled event

To-do item

•

Anniversary

Memo

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Press <Options> to access the following options:

•

View mode: change the view mode of the

calendar.

Calendar (Menu 7)

The calendar feature enables you to keep track of your

schedule and to-do list, to view missed alarm events,

and to make a memo.

•

Create: add a new event.

Go to: go to the current date or enter a specific

date.

•

Sort by: sort items by the type of event.

To access this menu, press <Menu> in Idle mode and

Delete: delete item(s) stored on the calendar by

select Calendar

using various deleting options.

You can only delete scheduled event with a

repeating alarm on Day view.

Consulting the calendar

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: view the memory status for

items stored in the phone’s memory.

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

•

Alarm: set an alarm for the event.

Before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: select to set the event to recur and a

repeat unit.

Creating an event

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

•

Entering a new scheduled event

1. Scroll to a date on the calendar.

2. Press <Options> and select Create

→

Schedule.

•

Until: if the event will recur, set the ending

date.

3. Enter information or change the settings in the

following entry fields:

4. Press <Save> to save the event.

•

Subject: enter the title of the event.

Details: enter event details.

Entering a new anniversary

1. Select a date on the calendar.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

2. Press <Options> and select Create

→

Anniversary

•

3. Enter information or change the settings in the

following entry fields:

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Menu functions

•

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

Select priority: select a priority level.

4. Press <Save> to save the event.

•

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

Viewing an event

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

4. Press <Save> to save the event.

•

Blue: scheduled event • Orange: anniversary

Red: to-do item Green: memo

Entering a memo

•

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

1. Select a date on the calendar to display the events

for the day.

→

Memo.

2. Select an event to view its details.

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

While viewing an event or the event list, press

Options> to access the following options:

View: display the event details.

Edit: edit the event.

→

To do

•

3. Enter information or change the settings in the

following entry fields:

•

Create: add a new event.

•

Send via: send the event via SMS, MMS,

e-mail, or Bluetooth.

The following icons will be displayed according to the

event’s type and status:

View mode: change the view mode of the

calendar.

•

Alarm set

Recurring event

Completed to-do

•

Sort by: sort items by the type of event.

Delete: delete item(s) stored on the calendar by

using various deleting options.

To-do priority; its colour indicates the priority

level (Red: high, Blue: normal, and Grey: low)

•

Missed alarm events: view events whose alarms

you have missed.

Week view

You can view events (only for items stored for

Schedule) for the selected week.

Memory status: view the memory status for

items stored in the phone’s memory.

A cell on the timetable indicates the presence of event

information.

Viewing an event in different mode

Select the cell that contains the event you want.

By default, the calendar appears in Month view mode.

Press <Options> and select View mode to change

the mode.

Day view

You can view events for the selected date.

Select an event to view its details.

Menu functions

Viewing a missed alarm event

Camera (Menu 8)

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

You can use the camera module embedded in your

phone to take photos and record videos.

•

Press <View> to view the corresponding event.

To access this menu, press <Menu> in Idle mode and

Press <Exit>.

select Camera, or press and hold [

Accessing missed event alarm

1. Press <Options> and select Missed alarm

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

events

2. Select an event.

3. Press <Confirm> to confirm and delete the event.

Using missed alarm options

Taking a photo

From the event list, press <Options> to access the

following options:

You can take photos in various modes using the

phone. The camera produces JPEG photos.

•

View: display the event details.

Delete: delete the event.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Delete all: delete all events.

1. Access the Camera menu to turn on the camera.

The image to be captured appears on the display.

2. Adjust the image by aiming the camera lens at the

subject.

Single shot: take a photo in normal mode.

Multi shot: take a series of action stills. Select the

number of photos and the speed that the camera

will take.

•

Press the left soft key to access camera

options.

•

Use the keypad to change the camera settings

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take.

or switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 68

]

•

Effects: change the colour tone or apply a special

effect to photos to be taken in normal mode.

4. To

Press

Options>.ꢀp. 68

Frames: apply a decorative frame to photos to be

taken in normal mode.

use photo options

delete the photo

•

Flash: determine the flash use.

[C] and then <Yes>.

Timer: set a time delay before the camera takes a

photo.

return to Capture mode

<Preview>.

•

Go to photos: go to the Photos folder.

Using camera options in Capture mode

Settings: change the default settings for taking a

photo.

In Capture mode, press the left soft key to access the

following options:

Size: select an image size.

•

Record video: switch to Record mode.

Quality: select an image quality setting.

Viewfinder mode: select a preview screen.

Shooting mode: take a photo in the following

modes:

Menu functions

Shutter sound: select the sound that you hear

Key

Function

when you press the shutter release, [

[4]

]

Changes the camera mode.

•

Short cuts: view the functions of the keys you can

use.

Changes the colour tone or applies a

special effect to a photo.

Using the keypad in Capture mode

[6]

Reduces the distortion on the image to

maximise detail and sharpness.

You can use the keypad to customise your camera

settings in Capture mode.

[

]

Selects a decorative frame.

Sets the timer.

Key

Function

[

]

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Goes to the Photos folder.

Determines the flash use.

Changes the preview screen.

[Left/

Right]

]

[Up/

Down]

Zooms in or out.

Using photo options

After saving a photo, press <Options> to access the

following options:

[1]

[2]

[3]

Switches to Record mode.

ꢀp. 70

Changes the image size.

•

Take another: return to Capture mode.

Send via: send the photo via MMS, e-mail, or

Bluetooth.

Changes the image quality.

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

•

Delete: delete the photo.

•

Delete: delete the photo.

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

Protection: protect the photo from being deleted.

Properties: view the properties of the photo.

Rename: change the name of the photo.

Move to Favourite images: move the photo to

the Favourite images folder.

•

Slide show: display all photos in turn as a slide

show. You can select the rate at which the photos

cycle.

Viewing a photo

1. In Capture mode, press the left soft key and select

Share for bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Go to photos

2. Scroll to a photo and press [ ].

While viewing a photo or the photo list, press

•

Protection: protect the photo from being deleted.

Options> to access the following options:

List: return the screen to the photo list.

View: view the photo on the full screen.

Properties: view the properties of the photo.

•

Taking a photo with the phone closed

1. Press and hold [

•

Send via: send the photo via MMS, e-mail, or

Bluetooth.

2. Press [ ] to select an option and press [ ] to

change the setting.

Menu functions

•

: flips the image vertically and horizontally.

: changes the image brightness.

: zooms in or out.

5. To

play back the video clip

Press

[

use the video options

delete the video clip

return to Record mode

<Options>.ꢀp. 72

Press and hold [

] to turn the flash on or off.

[C] and then <Yes>.

3. Press [ to take a photo. The photo is

]

automatically saved in the Photos folder.

<Preview>.

Recording a video

Using camera options in Record mode

You can record a video of what is displayed on the

camera screen and save it.

In Record mode, press the left soft key to access the

following options:

1. In Capture mode, press [1].

•

Take photo: switch to Capture mode.

2. Aim the camera lens at the subject to adjust the

image.

Effects: change the colour tone or apply a special

effect to a video.

•

Press the left soft key to access camera

options.

•

Flash: determine the flash use.

Timer: set a time delay before the camera starts

recording.

•

Use the keypad to change the camera settings

or switch to other modes.

ꢀp. 71

•

Go to videos: go to the Video clips folder.

3. Press [

]

to start recording.

Settings: change the following settings for

recording a video:

4. Press [

]

or the right soft key to stop recording.

The video is automatically saved in the Video

clips folder.

Size: select a frame size.

Video quality: select an image quality setting.

Screen mode: select a preview screen.

Keys

Function

[2]

[3]

[5]

Changes the frame size.

Changes the image quality.

Audio record: record audio with a video clip.

•

Short cuts: view the functions of the keys you can

use.

Changes the colour tone or applies a

special effect to a photo.

Using the keypad in Record mode

[6]

Reduces the distortion on the image to

maximise detail and sharpness.

You can use the keypad to customise your camera

settings in Record mode:

[7]

[8]

[9]

[0]

[

Mutes or unmutes the audio.

Sets the timer.

Keys

Function

[

]

Flips the image vertically.

Shows the mirror image.

Goes to the Video clips folder.

Determines the flash use.

Changes the preview screen.

[Left]/ Adjusts the brightness of the image.

[Right]

]

[Up]/

Zooms in or out.

[Down]

[1]

Switches to Capture mode.ꢀp. 66

Menu functions

To stop playback, press [ ].

To adjust the volume, press [

Using video options

After saving a video clip, press <Options> to access

the following options:

3. Press <Options> to access the following options:

•

Record another: return to Record mode.

•

List: return to the video clip list.

Send via: send the video clip via MMS, e-mail,

or Bluetooth.

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

•

Set as wallpaper: set the video clip, if saved

for adding it to MMS messages or e-mails, as

your wallpaper for the idle screen.

Delete: delete the video clip.

Rename: change the name of the video clip.

Move to Favourite videos: move the video

clip to the Favourite videos folder.

Share for bluetooth: set whether or not to

prevent this file from being accessed from

other Bluetooth devices.

•

Set as wallpaper: set the video clip, if saved for

adding it to MMS messages or e-mails, as your

wallpaper for the idle screen.

•

Delete: delete the video clip.

Rename: change the name of the video clip.

Go to videos: go to the Video clips folder.

Protection: protect the video clip from being

deleted.

•

Properties: view the properties of the video clip.

•

Protection: protect the video clip from being

deleted.

Properties: view the properties of the video

clip.

Playing a video clip

1. In Record mode, press the left soft key and select

Go to videos

2. Scroll to a video clip and press [ ].

Recording a video with the phone closed

1. Press and hold [

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

2. Press [ ] to switch to Record mode.

3. Press [ ] to select an option and press [ ] to

change the setting.

To access this menu, press <Menu> in Idle mode and

select Settings

•

: flips the image vertically and horizontally.

: changes the image brightness.

: zooms in or out.

Time & Date (Menu 9.1)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

Press and hold [

] to turn the flash on or off.

4. Press [

5. Press [

]

to start recording.

ꢀp. 38

to stop recording. The video clip is

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select time format.

Set date: enter the current date.

automatically saved in the Video clips folder.

•

Starting day of calendar: set which day of the

week the calendar starts with.

Menu functions

•

Anykey answer: answer an incoming call by

Phone settings (Menu 9.2)

pressing any key, except <Reject> and [

Many different features of your phone’s system can be

customised to suit your preferences.

When this option is not selected, you must press

<Accept> or [

] to answer a call.

Language (Menu 9.2.1)

Display settings (Menu 9.3)

Use this menu to select one of several languages for

the display text.

Use this menu to change settings for the display and

light.

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Wallpaper (Menu 9.3.1)

You can set up the idle screen on both displays.

Extra settings (Menu 9.2.3)

•

Main display: select an image or video clip to be

displayed on the main display.

You can turn the automatic redialling or answering

feature on or off, and lock the external keys.

Cover display: select an image to be displayed on

the external display.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Text position: select a text position on the

display. If you don’t want to display text in Idle

mode, select Off

•

Active folder: answer an incoming call by opening

the phone.

•

Text mode: select a text mode.

Text colour: select a text colour.

•

Graphic logo: set the phone to display the service

provider’s logo instead of its name, if you have

downloaded it.

Dialling font colour (Menu 9.3.5)

Use this menu to select a font colour for the numbers

entered while dialling.

Skin (Menu 9.3.2)

Sound settings (Menu 9.4)

You can select a skin colour for Menu mode.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

LCD brightness (Menu 9.3.3)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to select a volume and alert type for

incoming calls.

Back light (Menu 9.3.4)

•

Ringtone: select a ring tone for the call ringer.

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

Volume: select a ringer volume.

Alert type: specify how you are to be informed of

incoming calls.

•

Main LCD on: select the length of time the

backlight is on.

Melody: the phone rings using the selected ring

tone.

•

Main LCD dim: select the length of time the

display is in Dim mode after the backlight turns off.

After a specified time, the display turns off.

Vibration: the phone vibrates but not rings.

Vibration then melody: the phone vibrates three

times and then starts ringing.

Menu functions

Keypad tone (Menu 9.4.2)

Folder tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

You can adjust the keypad tone volume using

Quiet mode (Menu 9.4.6)

[

]

in Idle mode.

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Message tone (Menu 9.4.3)

Use this menu to set up the ringer for incoming SMS ,

MMS, e-mail, and CB messages.

•

Vibration: set the phone to vibrate.

Mute: mute all sound settings.

•

Tone: select one of several message tones.

Extra tones (Menu 9.4.7)

Alert type: specify how you are to be informed of

any incoming messages.

Use this menu to customise additional tones for the

phone.

•

Repetition: specify how often the phone informs

you of a new message.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Connection tone: set the phone to beep when it

is connected to the system.

•

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

Error tone: set the phone to beep when you have

made a mistake or something wrong happens on

the phone.

2. Select the type of calls to be diverted.

3. To activate call diverting, select Activate

Otherwise, select Deactivate

Network services (Menu 9.5)

4. Move to the Divert to line.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

5. Enter the number to which calls are to be diverted

and press <Select>.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

Call diverting (Menu 9.5.1)

This network service reroutes incoming calls to a

phone number that you specify.

Call barring (Menu 9.5.2)

1. Select a call diverting option:

This network service allows you to restrict your calls.

1. Select a call barring option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

All outgoing: prohibit outgoing calls.

International: prohibit international calls.

•

No reply: divert calls when you do not answer

the phone.

Menu functions

•

International except to home: only allow

Call waiting (Menu 9.5.3)

calls to numbers within the current country

when you are abroad, and to your home

country, defined as where your home network

provider is located.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

•

2. Select Activate and press <Select>.

To deactivate call waiting, select Deactivate

Network selection (Menu 9.5.4)

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

•

Automatic: connect to the first available network

when roaming.

Deactivate

4. Enter the call barring password supplied by your

•

Manual: select the network you want.

service provider and press <Select>.

•

Voice server number: enter the voicemail server

number.

Caller ID (Menu 9.5.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Closed user group (Menu 9.5.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Default: use the default setting provided by the

network.

Hide number: ensure your number does not

display on the other person’s phone.

•

Index list: add, delete, or activate CUG index

numbers. Press <Options> to access the options

for setting up an index list.

Send number: send your number each time you

make a call.

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

You must enter the voice server number before you

can access your voicemails. Your service provider

can give the voice server number.

•

Deactivate: deactivate the CUG function, if the

default group is enabled or a CUG index is

selected.

•

Connect to voice server: connect to the

voicemail server to allow you to listen to your

messages. You can also connect to the voicemail

server by pressing and holding [1] in Idle mode.

Menu functions

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

Band selection (Menu 9.5.8)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 metres. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Setting up the Bluetooth feature

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

My devices: search for connectable Bluetooth

Bluetooth (Menu 9.6)

devices.

ꢀp. 81

Use this menu to activate the Bluetooth feature.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder and

camera, or vice versa.

• Some devices may not be compatible with your

phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

The colour of the icon indicates the status of the

the device:

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Bluetooth services: display available Bluetooth

services.

Searching for and pairing with a Bluetooth

device

3. Select a device.

1. From the Bluetooth setting options, select My

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

devices

2. Select Search new device

When the owner of the other device enters the

same code, pairing is complete.

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

devices, select More devices

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

Using device options

1. From the device list, scroll to a device you want.

•

Hands-free or

headset

•

Mobile phone

2. If your phone didn’t find Bluetooth services for the

•

Computer

Printer

•

PDA

selected device, press <Select>.

Unknown device

Menu functions

3. Press <Options> to access the following options:

Sending data via Bluetooth

1. Activate the Bluetooth feature.

Options may vary depending on the paired

device.

2. Select the application in which the item you want

to send is stored.

•

Connect: connect to the currently selected

device.

Disconnect: end the connection with the

device.

Browse files: search for data from the device

and import data directly to your phone.

Service list: refresh the Bluetooth service list.

Rename: rename the paired device.

3. Scroll to the item you want and press <Options>.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

•

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Authorise/Unauthorised device: determine

Receiving data via Bluetooth

whether or not the phone asks you to permit

connection when other devices try to connect

to your phone.

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

•

Delete: delete the selected device or all

devices.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Phone lock (Menu 9.7.3)

Security (Menu 9.7)

This feature locks the phone from unauthorised use.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.7.4)

Use this menu to change your phone password. The

PIN check (Menu 9.7.1)

password is preset to 00000000

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Privacy (Menu 9.7.5)

Use this menu to lock all menu functions on the

phone, except for call functions.

When this feature is enabled, you must enter the

phone password to access menu functions. The

Change PIN (Menu 9.7.2)

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

password is preset to 00000000

Menu functions

SIM lock (Menu 9.7.6)

Connection settings (Menu 9.8)

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the WAP

browser or send MMS messages or e-mails.

FDN mode (Menu 9.7.7)

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the WAP, MMS,

and e-mail features may not work properly.

If supported by your SIM card, Fixed Dialing Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card. To use this feature, you must enter your

PIN2.

Creating a profile

1. Press <New> and specify following information:

•

Profile name: enter a profile name.

Home URL: enter the address of the WAP

homepage of your service provider.

Proxy: activate or deactivate the proxy server.

When this option is activated, the IP address

and Port options are activated.

DNS: activate or deactivate the DNS address.

When this option is selected, DNS1 and DNS2

are activated.

Change PIN2 (Menu 9.7.8)

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

•

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

•

Delete: delete the profile.

Add new connection: add a new profile.

Reset settings (Menu 9.9)

When the bearer is set to GPRS

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

APN: enter the access point name.

1. Press [ ] to check the setting category(ies) to be

reset.

Password: enter the login password.

When the bearer is set to GSM

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

Dial number: enter the PPP phone number.

4. Enter the phone password and press <OK>.

Password: enter the login password.

The password is preset to 00000000. You can

Data call type: select a call type for data

transmission.

change this password

ꢀp. 83

2. Press <Save> to save the profile.

Using profile options

Press <Options> to access the following options:

•

Edit: edit the profile.

“Enter PUK”

The PIN code has been entered incorrectly three

Solve problems

•

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No Service,” “Network Failure,” or “Not

Done” displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM card”

•

Be sure that the SIM card is correctly installed.

“Enter password”

You have entered a number but it was not

dialled

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Be sure that you have pressed [

Be sure that you have accessed the right cellular

network.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

Be sure that you have not set an outgoing call

barring option.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Your correspondent cannot reach you

The audio quality of the call is poor

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Be sure that you are accessing the correct cellular

network.

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Be sure that you have not set an incoming call

barring option.

No number is dialled when you re-call a

Phonebook entry

•

Your correspondent cannot hear you speaking

•

Use the Contacts list feature to ensure the number

has been stored correctly.

Be sure that you have switched on the

microphone.

•

Re-store the number, if necessary.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

If the above guidelines do not help you to

solve the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

The phone starts beeping and “Warning Low

battery” flashes on the display

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is

2.0W/kg.^*

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

The highest SAR value for this model phone was

0.664W/kg.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Health and safety information

Road safety

Electronic devices

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

Hearing aids

instructions. Do not connect incompatible products.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Other medical devices

Potentially explosive environments

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in obtaining this

information.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

CB (Cell Broadcast)messages •

Delivery reports, message • 55

Dialled calls • 29

Dialling font colour • 75

Dialling, voice • 40

Display

language • 74

settings • 74

Diverting, calls • 77

DTMF tones, send • 27

Index

AB mode, text input • 22

Alarm • 38

Answering

Calculator • 41

Call costs • 30

Call records

dialled • 29

missed • 29

received • 30

Call time • 30

Caller group

creating • 32

managing • 33

Caller ID • 79

Calls

Characters, enter • 21

Conference call • 27

Connection tone • 76

Converter • 42

Creating messages

e-mail • 47

MMS • 46

SMS • 45

Creating organiser

anniversaries • 63

events • 63

call • 24

second call • 25

Anykey answer • 74

Auto redial • 74

E-mails

creating/sending • 47

deleting • 53

setting • 57

viewing • 52

Emergency calls • 92

Backlight time, set • 75

Band selection • 80

Barring, calls • 77

Battery

tasks • 64

answering • 24

barring • 77

diverting • 77

holding • 25

redialling • 23

rejecting • 24

transferring • 26

waiting • 78

Camera

Deleting

charging • 7

call records • 29

e-mails • 53

events • 65

missed alarms • 66

phonebook 34

photos • 69

low indicator • 8

precautions • 89

Bluetooth

FDN (Fixed Dial Number) mode

• 84

receiving, data • 82

sending, data • 82

settings • 80

Forwarding

e-mails • 53

MMS messages • 50

SMS messages • 50

options • 67

photos • 66

videos • 70

SMS messages • 49

video clips • 72

Broadcast messages • 51

Browser, WAP • 43

Locking

media contents • 83

phone • 83

SIM card • 84

Low battery indicator • 8

Multi-party calls • 27

Muting

key tones • 27

microphone • 26

My name card • 34

icons • 10

locking • 83

password • 83

resetting • 85

switching on/off • 8

unpacking • 6

Games • 35

Greeting message • 74

Health and safety • 88

Holding, call • 25

Names

Phonebook

Memory status

downloaded items • 62

phonebook 35

Message tone • 76

Messages

copying • 31

deleting • 34

editing • 31

managing • 34

options • 31

dialling • 40

entering • 21

searching • 31, 40

Network band, select • 80

Network selection • 78

Network services • 77

Icons, description • 10

Images, downloaded • 60

Inbox, messages

e-mail • 52

cell broadcast • 51

e-mail • 47

greeting • 74

MMS • 46

SMS • 45

web • 50

speed-dialling • 33

MMS • 50

SMS • 48

Photos

deleting • 69

taking • 66

viewing • 69

International calls • 23

Internet • 43

Outbox, messages • 51

Own number • 34

PIM sync

Minute minder • 76

missed alarm events • 66

Missed calls • 29

MMS messages

creating/sending • 46

deleting • 50

Key tone volume • 76

Keypad tones

selecting • 76

sending • 27

creating a profile • 39

starting • 39

PIN, change • 83

PIN2, change • 84

Power on/off tone • 76

Privacy • 83

Password

call barring • 78

phone • 83

Phone

care and maintenance •

display • 10

Language, select • 74

Last number, redial • 23

setting • 55

viewing • 48

Problems, solve • 86

Index

SMS messages

creating/sending • 45

Received

e-mail • 52

Videos

deleting • 49

viewing • 48

Sound settings • 75

Sounds, downloaded • 61

Speaker phone • 26

Speed-dial • 33

Stopwatch • 42

Switching on/off

microphone • 26

phone • 8

deleting • 72

playing • 72

recording • 70

messages • 48

Received calls • 30

Recording

Voice memos

videos • 70

playing • 37

recording • 36

Voice recognition • 40

Voice recorder

playing • 37

recording • 36

Voicemail server

connecting • 79

editing • 79

voice memos • 36

Redialling

automatically • 74

manually • 23

Resetting phone • 85

Ringer

incoming calls • 75

messages • 76

Road safety • 90

Roaming • 78

Templates • 54

Text input mode, change • 21

Text, enter • 21

Timer • 42

Waiting call • 78

WAP browser

access • 43

Tone

connect • 76

folder • 76

Safety

information • 88

Security, calls • 83

Sent messages • 52

SIM card

bookmarks • 44

cache, clear • 45

World time • 38

keypad • 76

message • 76

minute minder • 76

power on/off • 76

inserting • 7

locking • 84

Zanussi ZCOF 637 X User Manual
Verizon QSG6410VW User Manual
Toshiba SD R1002 User Manual
Sony Ericsson Z800i User Manual
Sony Ericsson Z500 Series User Manual
Siemens CF75 User Manual
Seagate ST902504EXD101 RK User Manual
Seagate CONSTELLATION2 ST9500622NS User Manual
Samsung BLACKJACK II User Manual
Philips Emotive Micro MZ1000 User Manual