* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
GPRS TELEPHONE
SGH-E600C
User’s Manual
ELECTRONICS
Printed in Korea
World Wide Web
Code No.: GH68-05408A
English. 01/2005. Rev. 1.1
Contents
Contents
Options During a Call. . . . . . . . . . . . . . . . . 63
Putting a Call on Hold . . . . . . . . . . . . . . . . . . . 63
Using the Menu Functions . . . . . . . . . . . . . . . . 64
Switching the Microphone Off (Mute) . . . . . . . . 65
Muting or Sending Key Tones. . . . . . . . . . . . . . 66
Sending a Sequency of DTMF Tones . . . . . . . . . 66
Searching for a Number in Phone Book. . . . . . . 67
Using the SMS Service . . . . . . . . . . . . . . . . . . . 67
Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Making a Multiparty Call . . . . . . . . . . . . . . . . . 68
Camera. . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Take Photos (Menu 4.1) . . . . . . . . . . . . . . . . . 110
My Photos (Menu 4.2) . . . . . . . . . . . . . . . . . . 115
Take Videos (Menu 4.3) . . . . . . . . . . . . . . . . . 116
My Videos (Menu 4.4) . . . . . . . . . . . . . . . . . . . . . 117
Delete All (Menu 4.5) . . . . . . . . . . . . . . . . . . . . . 118
Memory Status (Menu 4.6). . . . . . . . . . . . . . . 118
Sound Settings. . . . . . . . . . . . . . . . . . . . . 119
Ring Tone (Menu 5.1) . . . . . . . . . . . . . . . . . . 119
Ring Volume (Menu 5.2) . . . . . . . . . . . . . . . . 119
Alert Type (Menu 5.3) . . . . . . . . . . . . . . . . . . 120
Keypad Tone (Menu 5.4) . . . . . . . . . . . . . . . . 120
Message Tone (Menu 5.5). . . . . . . . . . . . . . . . 121
Folder Tone (Menu 5.6) . . . . . . . . . . . . . . . . . 122
Power On/Off (Menu 5.7) . . . . . . . . . . . . . . . 122
Alerts on Call (Menu 5.8) . . . . . . . . . . . . . . . 123
Extra Tones (Menu 5.9) . . . . . . . . . . . . . . . . . 123
Using the Menus . . . . . . . . . . . . . . . . . . . . 71
Accessing Menu Functions by Scrolling . . . . . . . 71
Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . 72
List of Menu Functions . . . . . . . . . . . . . . . . . . 73
Text Messages . . . . . . . . . . . . . . . . . . . . . . 79
Inbox (Menu 1.1) . . . . . . . . . . . . . . . . . . . . . . 79
Outbox (Menu 1.2) . . . . . . . . . . . . . . . . . . . . . 81
Write New (Menu 1.3) . . . . . . . . . . . . . . . . . . . 82
Templates (Menu 1.4) . . . . . . . . . . . . . . . . . . . 85
Settings (Menu 1.5) . . . . . . . . . . . . . . . . . . . . 85
Delete All (Menu 1.6) . . . . . . . . . . . . . . . . . . . 87
Memory Status (Menu 1.7). . . . . . . . . . . . . . . . 87
Voice Mail (Menu 1.8) . . . . . . . . . . . . . . . . . . . 88
Broadcast (Menu 1.9) . . . . . . . . . . . . . . . . . . . 89
Phone Settings. . . . . . . . . . . . . . . . . . . . . 124
Infrared Activate (Menu 6.1) . . . . . . . . . . . . . 124
Display Settings (Menu 6.2) . . . . . . . . . . . . . 125
Greeting Message (Menu 6.3). . . . . . . . . . . . . 127
Own Number (Menu 6.4) . . . . . . . . . . . . . . . . 128
Language (Menu 6.5). . . . . . . . . . . . . . . . . . . 128
Security (Menu 6.6). . . . . . . . . . . . . . . . . . . . 128
Extra Settings (Menu 6.7) . . . . . . . . . . . . . . . 132
Short Cut (Menu 6.8). . . . . . . . . . . . . . . . . . . 133
Reset Settings (Menu 6.9) . . . . . . . . . . . . . . . 134
Multimedia Messages. . . . . . . . . . . . . . . . . 91
Inbox (Menu 2.1) . . . . . . . . . . . . . . . . . . . . . . 91
Outbox (Menu 2.2) . . . . . . . . . . . . . . . . . . . . . 94
Draft (Menu 2.3). . . . . . . . . . . . . . . . . . . . . . . 96
Write New (Menu 2.4) . . . . . . . . . . . . . . . . . . . 96
Templates (Menu 2.5) . . . . . . . . . . . . . . . . . . 100
Delete All (Menu 2.6). . . . . . . . . . . . . . . . . . . 101
Memory Status (Menu 2.7). . . . . . . . . . . . . . . 101
Setup (Menu 2.8) . . . . . . . . . . . . . . . . . . . . . 102
MMS Profile (Menu 2.9) . . . . . . . . . . . . . . . . . 103
Organiser . . . . . . . . . . . . . . . . . . . . . . . . . 135
Alarm (Menu 7.1) . . . . . . . . . . . . . . . . . . . . . 135
Calendar (Menu 7.2) . . . . . . . . . . . . . . . . . . . 137
Time & Date (Menu 7.3). . . . . . . . . . . . . . . . . 139
Calculator (Menu 7.4) . . . . . . . . . . . . . . . . . . 141
To Do List (Menu 7.5) . . . . . . . . . . . . . . . . . . 142
Voice Memo (Menu 7.6) . . . . . . . . . . . . . . . . . 145
Currency Exchange (Menu 7.7). . . . . . . . . . . . 147
Call Records . . . . . . . . . . . . . . . . . . . . . . . 105
Missed Calls (Menu 3.1) . . . . . . . . . . . . . . . . . 105
Received Calls (Menu 3.2) . . . . . . . . . . . . . . . 106
Dialled Calls (Menu 3.3). . . . . . . . . . . . . . . . . 106
Delete All (Menu 3.4) . . . . . . . . . . . . . . . . . . 107
Call Time (Menu 3.5) . . . . . . . . . . . . . . . . . . . 108
Call Cost (Menu 3.6) . . . . . . . . . . . . . . . . . . . 109
Network Services. . . . . . . . . . . . . . . . . . . 148
Call Diverting (Menu 8.1) . . . . . . . . . . . . . . . . 148
Call Barring (Menu 8.2) . . . . . . . . . . . . . . . . . 150
Call Waiting (Menu 8.3) . . . . . . . . . . . . . . . . . 152
Network Selection (Menu 8.4). . . . . . . . . . . . . 153
Caller ID (Menu 8.5) . . . . . . . . . . . . . . . . . . . 154
Closed User Group (Menu 8.6) . . . . . . . . . . . . 154
Band Selection (Menu 8.7) . . . . . . . . . . . . . . . 156
5
4
Contents
Important Safety
Precautions
Funbox . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
WAP Browser (Menu 9.1) . . . . . . . . . . . . . . . . 157
Games & More (Menu 9.2) . . . . . . . . . . . . . . . 164
Sounds (Menu 9.3) . . . . . . . . . . . . . . . . . . . . 167
Images (Menu 9.4) . . . . . . . . . . . . . . . . . . . . 167
Delete All (Menu 9.5). . . . . . . . . . . . . . . . . . . 168
Memory Status (Menu 9.6). . . . . . . . . . . . . . . 169
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Solving Problems. . . . . . . . . . . . . . . . . . . 170
Do not use a hand-held phone while driving;
park the vehicle first.
Access Codes . . . . . . . . . . . . . . . . . . . . . . 173
Phone Password . . . . . . . . . . . . . . . . . . . . . . 173
PIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
PUK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 174
PIN2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
PUK2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 175
Barring Password . . . . . . . . . . . . . . . . . . . . . 176
Switching Off When Refuelling
Do not use the phone at a refuelling point
(service station) or near fuels or chemicals.
Health and Safety Information . . . . . . . . 177
Exposure to Radio-Frequency Energy
Switching Off in an Aircraft
Wireless phones can cause interference. Using
them in an aircraft is both illegal and dangerous.
(SAR Information) . . . . . . . . . . . . . . . . . . . . 177
Precautions When Using Batteries. . . . . . . . . . 178
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . 180
Operating Environment . . . . . . . . . . . . . . . . . 180
Electronic Devices. . . . . . . . . . . . . . . . . . . . . 181
Potentially Explosive Environments . . . . . . . . . 183
Emergency Calls. . . . . . . . . . . . . . . . . . . . . . 184
Other Important Safety Information . . . . . . . . 185
Care and Maintenance. . . . . . . . . . . . . . . . . . 186
Switching Off in Hospitals
Switch your phone off near medical equipment.
Follow any regulations or rules in force.
Interference
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 188
Quick Reference Card . . . . . . . . . . . . . . . 195
All wireless phones may be subject to
interference, which could affect their
performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for
example).
7
6
Important Safety Precautions
Unpacking
Sensible Use
Your package contains the following items. The
illustrations below may look different from your
phone and accessories:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna
when the phone is switched on.
Emergency Call
Ensure the phone is switched on and in service.
Key in the emergency number for your present
location, then press the
key. You must
Handset
Travel Adapter
deactivate any unnecessary features before you
can make an emergency call. Give all the
necessary information as accurately as possible.
Do not cut off the call until given permission to
do so.
Water Resistance
Batteries
Your phone is not water-resistant. Keep it dry.
Headset
Accessories and Batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorised accessories
could damage your phone and may be
dangerous.
User’s Manual
Hand Strap
Qualified Service
Only qualified service personnel may repair your
phone.
Note: The items supplied with your phone may
be different, depending upon your country
or service provider.
For more detailed safety information, see “Health
and Safety Information” on page 177.
You can obtain the following accessories for your
phone from your local Samsung dealer:
CAUTION
• Standard/slim batteries
• Simple hands-free kit
• Trabel adapter
• Headset
• Data Kit
• Hand strap
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
• Battery charger
TO THE INSTRUCTIONS.
9
8
Your Phone
Your Phone
Key(s) Description
Phone Layout
In Menu mode, scroll through the menu
options and Phone Book.
The following illustrations show the main
elements of your phone:
In Idle mode, allow you to access your
favourite menu options directly. For
further details about shortcuts, see
page 133.
Earpiece
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering text, move the cursor to
the left and right respectively.
Display
Folder
In Idle mode, the Left key allows you
to quickly access the Text Messages
menu, and the Right key allows you to
access the Voice Memo menu.
Navigation (up/
down/ left/
right) keys
WAP Browser
key
Perform the functions indicated by the
text above them, on the bottom line of
the display.
Soft key (right)
Soft key (left)
(soft keys)
Power on/off /
menu exit key
Volume/menu
browse keys
Cancel/
correction key
In Idle mode, launches the WAP
(Wireless Application Protocol) Browser.
Dial/menu
confirmation key
Alphanumeric
keys
Deletes characters from the display.
IrDA port
In Menu mode, returns to the previous
menu level.
Microphone
Special function
keys
Makes or answers a call.
In Idle mode, recalls the last number
dialled or received when held down.
Antenna
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Camera
Camera Key
External display
Service light
11
10
Your Phone
Your Phone
Key(s) Description (continued)
Display
Ends a call. Also switches the phone on
and off when held down.
Display Layout
In Menu mode, cancels your input and
returns to Idle mode.
The display has three areas.
In Idle mode, accesses your voice mail
when held down.
Icons
Enter numbers, letters and some
special characters.
Text and
graphic area
Enter special characters.
Perform various functions.
Menu
Name
Soft key
Indicators
(on the right side of the phone)
In Idle mode, accesses the Camera
menu to allow you to use the camera
application. Turns the camera on when
held down.
Area
Description
First line
Displays various icons. See page
14.
In Capture mode, works as a camera
shutter.
Middle lines
Displays messages, instructions
and any information that you
enter, such as the number you
are dialling.
(on the left side of the phone)
During a call, adjusts the earpiece
volume.
In Idle mode, with the folder open,
adjust the keypad tone volume. With
the folder closed, turn the external
display on when held down.
Last line
Shows the current functions
assigned to the two soft keys.
In Menu mode, scroll through the
menu options and Phone Book.
13
12
Your Phone
Your Phone
Icon
Description (continued)
Icons
Appears when Silent mode is active or
when you set the Alert Type menu
(Menu 5.3) so that the phone vibrates
when you receive a call. For further
details, see page 31 and page 120
respectively.
Icon
Description
Shows the received signal strength. The
greater the number of bars, the
stronger the signal.
Appears when a call is in progress.
Appears when the IrDA port is active.
For details, see page 124.
Appears when you are out of your
service area. When it displays, you
cannot make or receive a call.
Appears when Mute mode is active.
Shows the level of your battery. The
more bars you see, the more power you
have remaining.
Appears when you are connected to the
GPRS network.
Appears when you are out of your home
area and have logged onto a different
network; for example, when travelling
in other countries.
Backlight
The backlight illuminates the display and the
keypad. When you press any key or open the
folder, the backlight turns on. It turns off when
no keys are pressed within a given period of
time, depending on your setting in the Back
Light menu (Menu 6.2.4). The display turns off
after one minute to conserve your battery power.
Appears when a new text message has
been received.
Appears when a new voice mail
message has been received.
Appears when a new multimedia
message has been received.
To specify the length of time the backlight is
active, set the Back Light menu. See page 126
for further details.
Appears when you set an alarm to ring
at a specified time.
15
14
Your Phone
Your Phone
External Display
Camera
Your phone has an external display on the folder.
It indicates when you have an incoming call or a
message. It also alerts you at the specified time
when you have set an alarm by turning on its
backlight and showing the corresponding icon on
it.
The camera module on the folder of your phone
allows you to take a photo and record a video
while on the move.
For further details about the Camera feature, see
page 110.
You can select a colour of the default image to
be displayed in the Front LCD menu (Menu
6.2.2). See page 126 for further details.
To turn the display on when the folder is closed,
press and hold one of the Volume keys on the
left side of the phone. You can also press the
Camera key on the right side of the phone
whether the folder is opened or closed.
Service Light
The service light is on the folder. It flashes when
services are available on the phone.
To activate or deactivate the service light, set
the Service Light menu (Menu 6.2.5). See
page 126 for further details.
Service light
17
16
Getting Started
Getting Started
3. Slide the SIM card into the SIM card socket,
as shown, so that it locks the card into
position.
Installing the SIM Card
Make sure the gold contacts of the card face
into the phone.
When you subscribe to a cellular network, you
are provided with a plug-in SIM card loaded with
your subscription details, such as your PIN, any
optional services available and so on.
Important! The plug-in SIM card and its
contacts can be easily damaged by
scratches or bending, so be careful
when handling, inserting or
removing the card.
Keep all SIM cards out of the reach
of small children.
1. If necessary, switch off the phone by holding
Note: When you need to remove the SIM card,
slide it upwards, as shown, and take it
out of the socket.
down the
displays.
key until the power-off image
2. Remove the battery. To do so:
➀ Slide the battery lock towards the top of
the phone and hold it in that position.
➁ Lift the battery away, as shown.
19
18
Getting Started
Getting Started
4. Replace the battery so that the tabs on the
end align with the slots at the bottom of the
phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter comes with your phone
for charging the battery. Use only approved
batteries and chargers. Ask your local Samsung
dealer for further details.
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
Note: You must fully charge the battery before
using your phone for the first time. A
discharged battery is fully recharged in
approximately 200 minutes.
5. Press the battery down until it clicks into
place. Make sure that the battery is properly
installed before switching the power on.
Using the Travel Adapter
The travel adapter allows you to use the phone
while the battery is charging, but this causes the
phone to charge more slowly.
1. With the battery in position on the phone,
plug the connector of the travel adapter into
the jack at the bottom of the phone.
21
20
Getting Started
Getting Started
2. Plug the adapter into a standard AC wall
outlet.
Switching the Phone On or Off
1. Open the folder.
3. When charging is finished, unplug the adapter
from the power outlet and disconnect it from
the phone by pressing the buttons on both
sides of the connector and pulling the
connector out.
2. Press and hold the
switches on.
key until the phone
3. If the phone asks you to enter a password,
enter the password and press the OK soft
key. It is preset to “00000000” at the factory.
For further details, see page 173.
4. If the phone asks for a PIN, enter the PIN and
press the OK soft key. For further details, see
page 174.
The phone searches for your network and,
after finding it, the idle screen appears on the
display. Now, you can make or receive a call.
Note: You must unplug the adapter before
removing the battery from the phone during
charging; otherwise, the phone could be
damaged.
Note: The display language is preset to English
at the factory. To change the language,
use the Language menu (Menu 6.5).
For further details, see page 128.
5. When you wish to switch the phone off, press
and hold the
image displays.
key until the power-off
Low Battery Indicator
When the battery is weak and only a few
minutes of talk time remain, a warning tone
sounds and a message repeats at regular
intervals on the display. When this happens,
your phone turns off the backlight to conserve
the remaining battery power.
When the battery level becomes too low, the
phone automatically turns off.
23
22
Call Functions
Call Functions
Ending a Call
Making a Call
When you want to end your call, briefly press
the key or close the folder.
When the idle screen displays, enter the area
code and phone number, then press the
key.
Redialling the Last Number
Note: When you activate the Auto Redial option
in the Extra Settings menu (Menu 6.7),
the phone automatically redials up to ten
times if the person does not answer the call
or is already on the phone. See page 132 for
further details.
The phone stores the numbers you’ve dialled,
received or missed if the caller is identified. See
“Call Records” on page 105 for further details.
To recall any of these numbers:
1. If you have typed characters on the display,
Making an International Call
press the
key to return to Idle mode.
1. Press and hold the 0 key.
2. Press the
key to display a list of the last
The + character appears.
numbers in the order you made or received
them.
2. Enter the country code, area code and phone
number and press the
key.
3. Use the Up and Down keys to scroll through
the numbers until the number you want
highlights.
Correcting the Number
4. To
dial the number
edit the number
Press the
To clear
Press the
C key.
key.
the last digit
displayed
Options soft key and
select Edit. Change the
number, referring to
“Correcting the Number”
on page 24.
any other digit
in the number
Left or Right key until the
cursor is immediately to
the right of the digit to be
cleared. Press the C key.
You can also insert a
missing digit simply by
pressing the appropriate
key.
delete the number Options soft key and
select Delete.
delete all of the
numbers on the
Call Log list
Options soft key and
select Delete All.
For further details, see
page 107.
the whole display C key and hold it for more
than one second.
25
24
Call Functions
Call Functions
Making a Call from Phone Book
Adjusting the Volume
You can store phone numbers that you use
regularly in the SIM card or in the phone’s
memory, which are collectively called Phone
Book.
During a call, if you want to adjust the earpiece
volume, use the Volume keys on the left side of
the phone.
Press the
the key to decrease the level.
key to increase the volume level and
Once you have stored numbers in Phone Book,
you can dial a number by pressing a few keys or
assign your most frequently-used numbers to
number keys using the Speed Dial feature.
For further details about the Phone Book
features, see page 34.
In Idle mode, you can also adjust the keypad
tone volume using these keys.
27
26
Call Functions
Call Functions
Answering a Call
Viewing Missed Calls
When somebody calls you, the phone rings and
displays the incoming call image.
When you are unable to answer a call for any
reason, you can find out who called you so that
you can call the person back.
When the caller can be identified, the caller’s
phone number or name, if stored in your Phone
Book, displays.
The number of calls you missed displays on the
idle screen immediately after a call is missed.
1. If necessary, open the folder. Press the
or the Accept soft key to answer the
incoming call.
key
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
When the Anykey Answer option in the
Extra Settings menu (Menu 6.7) is
activated, you can press any key to answer a
The number for the most recent missed call
displays, if available.
call except for the
key. See page 133.
key and the Reject soft
3. To
scroll through the
Press the
When the Active Folder option in the Extra
Settings menu (Menu 6.7) is activated, you
can answer the call simply by opening the
folder. See page 133.
Up or Down key.
missed calls
call the number
displayed
key.
Note: To reject the call, press and hold one of
the Volume keys before opening the
folder, or press the Reject soft key or
key.
edit or delete a
missed call number
Select soft key
See below.
2. End the call by closing the folder or pressing
the
key.
Editing a Missed Call Number
Note: You can answer a call while using Phone
Book or menu features. After ending the
call, the display returns to the function
screen you were using.
Note: When the number for the missed call is not
available, the Edit option does not display.
1. Press the Options soft key.
2. Press the Up or Down key to highlight the
Edit option.
29
28
Call Functions
Call Functions
3. Press the Select soft key.
Quickly Switching to Silent Mode
4. Change the number.
Silent mode is convenient when you wish to stop
the phone from ringing, in a theatre for
example.
5. To
call the number
Press the
key.
key until
Vibration
In Idle mode, press and hold the
the “Silent Mode” message and the
store the
number
Save soft key and enter
the name and location.
For further details, refer
to page 34.
icon (
) display.
In Silent mode, your phone changes the sound
settings as follows:
Option
New Setting
Deleting a Missed Call
Alert Type (Menu 5.3)
Keypad Tone (Menu 5.4)
Folder Tone (Menu 5.6)
Power off tone
Vibration
Off
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
Off
highlight the Delete option.
Off
3. Press the Select soft key.
Error Tone (Menu 5.9.1)
Off
You can press the
Missed Call feature.
key at any time to exit the
To exit and reactivate the previous sound
settings, press and hold the
“Exit Silent Mode” appears. The Vibration icon
key again until
Note: You can access the Missed Call feature at
any time by selecting the Missed Calls
menu (Menu 3.1). For further details, see
page 105.
(
no longer displays.
)
Note:
•
When you turn the phone off, Silent mode is
automatically deactivated.
• Activating Silent mode will not turn off the
camera shutter sound.
31
30
Selecting Functions and Options
Selecting Functions
and Options
To view the various functions and options
available and to select the one you want:
Your phone offers a set of functions that allow
you to customise it. These functions are
arranged in menus and sub-menus, accessed
1. Press the appropriate soft key.
using the two soft keys marked
menu and sub-menu allows you to view and
alter the settings of a particular function.
and
. Each
2. To
select the:
Press the
Select soft key or
the Right key.
• function displayed
• option highlighted
The roles of the soft keys vary according to the
function you are currently using; the labels on
the bottom line of the display just above each
key indicates its current role.
view the next function
or highlight the next
option on a list
Down key or
on the left side of
the phone.
key
Example:
move back to the
previous function
or option on a list
Up key or
on the left side
of the phone.
key
Service Provider
07:30
Tue 04 Nov
move back up one
level in the structure
Left key,
or key.
soft key
C
Menu
Name
exit the structure
without changing
the settings
key.
In some functions, you may be asked for a
password or PIN. Enter the code and press the
OK soft key.
Note: When you access a list of options, your
phone highlights the current option. If,
however, there are only two options, such as
On/Off or Enable/Disable, your phone
highlights the option that is not currently
active so that you can select it directly.
Press the left soft
key to access Menu
mode.
Press the right soft
key to access the
Phone Book feature.
33
32
Phone Book
Phone Book
4. Select a memory location, either SIM or
You can store phone numbers and their
corresponding names in both your SIM card and
your phone’s memories. They are physically
separate but are used as a single entity, called
Phone Book.
Phone, by pressing the Up or Down key and
press the Select soft key.
Note: When you change phones, any numbers
stored in your SIM card memory are
automatically available with the new
phone, whereas any numbers stored in
the phone’s memory must be reentered.
Note: Depending on the manufacture of your SIM
card, the maximum number of phone
numbers the SIM card can store may differ.
5. Enter a name and press the OK soft key.
Storing a Number with a Name
For further details about how to enter
characters, see page 46.
There are two ways to store a number:
5. Press the OK soft key to confirm the name.
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phone
Book menu
7. If you do not want to save the number and
name in the suggested location, press the C
key to clear the location number and enter
another location by pressing the number keys.
Storing a Number in Idle Mode
As soon as you start to enter a number, Save
appears above the left soft key to allow you to
store the number in Phone Book.
8. Press the OK soft key to store the name and
number.
After storing, the phone displays the Phone
Book entry or name you just created.
1. Enter the number you want to store.
Note: If you make a mistake while entering a
number, correct it using the C key. For
further details, see page 25.
9. To
Press the
use the entry options Options soft key. For
further details, see
2. When you are sure that it is correct, press the
Save soft key.
page 37.
3. Select an icon to identify the category of the
number to be stored. Three categories are
available:
return to the idle
screen
key.
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right
key and press the Select soft key.
35
34
Phone Book
Phone Book
Storing a Number Using the Phone
Book Menu
Using Phone Book Entry Options
While accessing any Phone Book entry, press the
Options soft key to use the options for the
entry.
1. When the idle screen displays, press the
Name soft key.
2. Scroll to New Entry by pressing the Up or
To
Press the
Down key and press the Select soft key.
select the
highlighted option
Select soft key or the
Right key.
3. Select an icon to identify the category of the
number to be stored by pressing the Left or
Right key, and press the Select soft key.
highlight a different
option
Up or Down key until
the option you want
highlights.
Note: The E-mail icon (
) is available in this
step. It allows you to save an e-mail
address instead of a phone number.
The following options are available:
4. Select a memory location, either SIM or
Phone, by pressing the Up or Down key and
press the Select soft key.
Paste: allows you to paste the number into the
normal dialling mode. Use this option to dial a
number similar to one in Phone Book, such as a
different extension in the same office.
Note: When you are saving an e-mail address,
SIM is not available.
Use the C key to change the number as
required; see page 25 for further details. When
5. Enter a name and press the OK soft key.
you are ready to dial, press the
key.
For further details about how to enter
characters, see page 46.
Edit: allows you to edit the name and/or
number.
6. Enter the number or address you want to
Select One Entry to change one number for the
selected name. If you change the name, the
number is saved separately.
store and press the Save soft key.
7. Continue the procedure from step 6 on page
35 to store the number.
Select All Entry to change the name of the
entry.
Photo Caller ID: allows you to assign one of
the photos you took using the camera as a caller
ID image to be displayed when you receive a call
from the selected number. For details about
camera feature, see page 110.
37
36
Phone Book
Phone Book
Delete: allows you to delete the selected
number from Phone Book. You are asked to
confirm that you wish to delete the name and
number by pressing the Yes soft key.
3. Enter the first few letters of the name that
you want to find and press the OK soft key.
The Phone Book entries are listed, starting
with the first entry matching your input.
Copy: allows you to copy the number to another
location. You can select the memory and the
location number.
4. To
Press the
view the highlighted
entry
View soft key.
Caller Group: allows you to organise your
Phone Book entries in caller groups so that the
phone alerts you in a specific way when a person
from one of your groups calls you. Select one of
the ten groups available.
select a different
entry
Up or Down key until
the entry you want
highlights.
To remove an entry from a group, select the No
Group option.
look for a name
starting with a
different letter
key labelled with the
letter you want.
For further details about how to change caller
group properties, see page 40.
5. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phone Book entry
options; for further details, see page 37.
Add Entry: allows you to add a new number to
the currently selected name.
Searching for and Dialling a
Number in Phone Book
Searching for a Number by Caller
Group
After storing numbers in Phone Book, you can
search for them in two ways; by name and by
caller group.
1. When the idle screen displays, press the
Name soft key.
2. Scroll to Group Search by pressing the Up or
Down key and press the Select soft key. You
are asked to enter a group name.
Searching for a Number by Name
1. When the idle screen displays, press the
3. Enter the first few letters of the group name
that you want to find and press the OK soft
key.
Name soft key.
2. Press the Select soft key when Search
highlights. You are asked to enter a name.
The caller groups are listed, starting with the
first group matching your input.
39
38
Phone Book
Phone Book
4. If necessary, scroll to a group by pressing the
• Call Ring Tone: allows you to set a ring
tone to be used when you receive a call
from a person in the group.
Up or Down key and press the View soft key.
The Phone Book entries in the caller group
are listed.
• SMS Tone: allows you to set a ring tone to
be used when you receive a message from
a person in the group.
5. To
view the
Press the
• Graphic: allows you to set a graphic icon to
be displayed when you receive a call from a
person in the group.
View soft key.
highlighted entry
select a different
entry
Up or Down key
until the entry you
want highlights.
• Group Name: allows you to assign a name
to the group. For further details about how
to enter characters, see page 46.
6. Once you have found the entry, press the
key to dial the number, or press the Options
soft key to access the Phone Book entry
options; for further details, see page 37.
6. When you are finished, press the C or
key.
Dialling a Number from Phone
Book
Once you have stored phone numbers in Phone
Book, you can dial them easily and quickly by
using the location numbers that were assigned
to them in Phone Book.
Editing a Caller Group
1. When the idle screen displays, press the
Name soft key.
2. Scroll to Group Edit by pressing the Up or
Dialling a Number from the SIM Card
Down key and press the Select soft key.
1. In Idle mode, enter the location number of
the number you want to dial and press the
key.
3. Scroll through the group list by pressing the
Up or Down key.
The list of the entries in the phone’s memory
appears.
4. When the group you want highlights, press
the Options soft key.
2. If necessary, scroll through the list using the
Up or Down key.
5. Select each option and change the settings,
as you want. The following options are
available:
3. When the number displays, press the Dial
soft key,
key.
41
40
Phone Book
Phone Book
Dialling a Number from the Phone’s
Memory
If you have already assigned a number to the
key, the Options soft key replaces the OK
soft key. Go to step 6.
1. In Idle mode, press and hold the 0 key. A +
appears.
4. Enter a few letters of the name you want to
find and press the OK soft key.
2. Enter the location number of the number you
want and press the
key.
5. Select a Phone Book entry from the list and
The list of the entries in the phone’s memory
appears.
press the View soft key.
6. Select a number, if the entry has more than
one, by pressing the Up or Down key and
press the Select soft key.
3. If necessary, scroll through the list using the
Up or Down key.
4. When the number displays, press the Dial
7. Once you have assigned a number to the key,
you can use the following options by pressing
the Options soft key:
soft key,
key.
• Change: allows you to assign a different
number to the key.
Speed-dialling
• Delete: allows you to clear the setting so
that no number is assigned to the key.
You can assign up to eight phone numbers from
Phone Book that you use most frequently to the
number keys (2 to 9), and then dial them easily
whenever you want, simply by pressing and
holding the associated number key.
• Delete All: allows you to clear the settings
for all keys so that no numbers are
assigned to any of the keys.
• Number: allows you to view the number
assigned to the key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the
8. When you are finished, press the C or
key.
Name soft key.
2. Scroll to Speed Dial by pressing the Up or
Speed-dialling from the Phone Book
Down key and press the Select soft key.
To speed-dial the numbers assigned to the 2 to
9 keys, press and hold the appropriate key.
3. Select the key to which you wish to assign the
speed-dialling number, from the 2 to 9 keys,
and press the OK soft key.
Note: Memory location 1 is reserved for your
Voice Mail server number.
43
42
Phone Book
Phone Book
Checking the Memory Status
Deleting All of the Phone Book
Entries
You can check how many names and numbers
are stored in Phone Book, in both the SIM card’s
and phone’s memory. You can also see the
capacity of both memory location.
You can delete all your entries from your phone’s
memory, your SIM card or both.
1. When the idle screen displays, press the
1. When the idle screen displays, press the
Name soft key.
Name soft key.
2. Select the Memory Status option and press
2. Scroll to Delete All by pressing the Up or
the Select soft key.
Down key and press the Select soft key.
3. Press the Up or Down key to view the number
of existing and total entries available in the
SIM card and phone’s memory.
3. To place a check mark by the memory
location you want to empty, All, SIM or
Phone, press the Mark soft key.
4. When you are finished, press the C or
key.
You can remove the check mark by pressing
the Unmark soft key.
Using the Service Dialling Numbers
4. Press the Delete soft key to delete the
entries in the selected memory location.
You can view the list of Service Dialling Numbers
(SDN) assigned by your service provider. These
numbers include emergency numbers, directory
enquiries and voice mail numbers.
5. Enter the phone password and press the OK
soft key.
Note: The password is preset to “00000000” at
the factory. To change this password, see
page 130.
1. When the idle screen displays, press the
Name soft key.
2. Select the SDN option and press the Select
6. When the confirming message appears, press
soft key.
the Yes soft key.
3. Scroll through the numbers by using the Up
or Down key.
To cancel the deletion, press the No soft key.
7. When you are finished, press the C or
key.
4. To dial the number displayed, press the Dial
soft key
Note: This option is available only when your SIM
card supports Service Dialling Numbers.
45
44
Entering Text
Entering Text
Note: The available text input modes may be
different, depending on your language
setting. Refer to the following table:
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing
for greater convenience and ease of use.
Language Auailable Modes
ENGLISH
Chinese T
Chinese S
CHN T Stroke, Quick English, English,
Number, Symbolic, My Words
CHN T Stroke, Quick English, English,
Number, Symbolic, My Words
You can also enter any combination of Chinese
characters, alphabets, numbers, special symbols
including punctuation marks and shortcuts.
Pinying, CHN S Stroke, Quick
English, English, Number, Symbolic,
My Words
Malay
Quick Malay, Malay, Number, Symbolic
My Words
The following text input modes are available on
your phone:
• Pinyin mode
• Chinese Simplified Stroke mode
• Quick English mode
• English mode
Changing the Text Input Mode
When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator on the display.
• Malay mode
• Chinese Traditional Stroke mode
• Number mode
Example: Entering a name for a Phone Book
entry
• Symbolic mode
Enter Name
• My Words mode
• Help mode
Directions for using each of the text input modes
appear later in this section.
Text input
mode indicator
You can change between Chinese and English
input methods or between numbers and
symbols.
46
47
Entering Text
Entering Text
To change to another text input mode:
Using Chinese Pinyin Mode
1. Press the right soft key labelled with the
current mode.
Pinyin is a system to write the pronunciation of
Chinese words using the Latin alphabet. With the
pinyin input method, you can enter Chinese
characters by keying in the Pinyin string from
the phone’s keypad and the phone automatically
presents the matching words.
2. Scroll to the mode you want by pressing the
Up or Down key.
3. To select the highlighted mode, press the
Select soft key.
This mode allows you to enter Pinyin characters
with only one key press per letter.
Note: If you want to exit the menu without
changing to a new mode, press the right
soft key.
Typing Characters in Pinyin Mode
4. The selected text input mode indicator
appears at the bottom of the display.
1. Press the keys corresponding to the phonetic
spelling, referring to the alphabets printed on
the keys. Notice that the choices in the
Character Selection Field change. All of the
phonetic spellings corresponding to the keys
you press display.
• Chinese Pinyin mode →
• Chinese Simplified Stroke mode →
• Quick English mode →
• English mode →
Example: Typing “
” in Pinyin mode
• Malay mode →
• Chinese Traditional Stroke mode →
• Number mode →
• Symbolic mode → No Indicator
• My Words mode → No Indicator
• Help mode → No Indicator
Key Stroke Field
Press the 5 and 4
keys to enter “li.”
To select “li”, press
the Right key.
Character Selection
Field
2. Press the Left or Right key to select the Pinyin
you want.
48
49
Entering Text
Entering Text
3. If you cannot find the character on the
display, scroll through the choices in the
Character Selection Field by pressing the
Down key. To move back, press the Up key.
Inserting a Space
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
When the character you are typing appears in
the Character Selection Field, you may select
it, without completing the Pinyin spelling for
the character.
Scrolling
To move the cursor to the left or right through
your text, press the Left or Right key.
4. To select a character, press the 1 key to
activate the Character Selection Field. A
Clearing Strokes and Characters
number (7 to
) is added to the beginning of
a corresponding character. With the Character
Selection Field activated, a normal press on
Press the C key one or more times to remove
key stokes to the left. When the Key Stroke Field
is empty, pressing the C key removes characters
from the Text Area.
the 7 key to the
key selects the
corresponding character.
Rapid Character Entry
Rapid character entry is easy in any mode, using
the Character Selection Field. As you enter
characters, your phone predicts the next
character you might want and presents choices
in the Character Selection Field. When the
character you want appears, you may select it as
described in step 4 on page 50.
Press the 9 key
to select “ .”
Notes:
For example, when you want to type the word
• If you enter the first character of a name you
assigned to a My Words item (see page 55), the
display shows you the character along with the
Pinyins for your keypress. To use the item, press
the Right key to highlight the character and then
“zhong guo (
),” enter the first character
using the following keystrokes; 9, 4, 6, 6, 1 and
7. You don’t need to complete the Pinyin spelling
to include “guo ( ).” With no extra typing, the
character displays conveniently in the Character
Selection Field for you to choose.
press the
key.
• If you enter the first three characters of a My
Words item (see page 55), the remaining
characters automatically display. To use the My
Words item, press the Right key to move the
cursor. If you don’t want to use it, enter the next
character you want.
51
50
Entering Text
Entering Text
Typing Stokes and Characters in
Stroke Mode
Using Chinese Stroke Mode
This mode allows you to enter individual Chinese
strokes, in written order, from top to bottom and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Traditional
Stroke mode.
1. To type a character, press the keys
corresponding to its component strokes. Press
the keys on the phone in order that you
would write the strokes, using one press per
stroke.
The two modes work similarly, but the
characters that appear on the display may differ.
Example: Typing “
” in Chinese Traditional
Stroke mode
Even though there are many different strokes
used to create Chinese characters, the strokes
are classified into 5 basic categories; heng, shu,
pie, dian and zhe. The basic strokes are printed
on the 1 to 5 keys on the keypad.
Enter Name
To enter a stroke, press the key printed with the
stroke that most closely represents the exact
stroke you want.
Key Stroke Field
Press the 5 and 3
keys to enter “
”
OK
Character Selection Field
Press the 7 key to select
The table shows the stroke/key relationship:
“
.”
2. The phone displays your strokes in the Key
Stroke Field and offers character choices in
the Character Selection Field. As you enter
strokes, notice that the choices in the
Character Selection Field change. To scroll
through the choices, press the Down key. To
move back, press the Up key.
53
52
Entering Text
Entering Text
3. When the character you are typing appears in
the Character Selection Field, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
Selection Field correspond to the keys 7 to
on the keypad. To select a character and add it
to your text, press the corresponding key
Rapid Character Entry
Rapid character entry is easy in any mode, using
the Character Selection Field. As you enter
characters, your phone predicts the next
character you might want and presents choices
in the Character Selection Field. When the
character you want appears, you may select it as
described in Step 3 on page 54.
(7 to
).
Notes:
In most cases, the character you want appears
in the Character Selection Field before you enter
all of the strokes to build it.
• If you are uncertain of the order of one or more
strokes, press the 6 key in place of each
questionable stroke. Continue entering strokes until
the character displays in the Character Selection
Field or until you finish the character.
For example, try typing the twelve stroke
character pair “
” using the following
• If you enter the first three characters of a My
Words item (see page 55), the remaining
characters automatically displays. To use the word
you added, press the Right key to move the cursor.
If you don’t want to use it, enter the next
character you want.
keystrokes; 2, 8, and 7. Even though “
twelve stroke character pair, your phone enables
you to type it in only three key presses!
” is a
Using My Words Mode
Inserting a Space
This mode allows you to preset Chinese words or
phrases so that you can quickly and easily insert
them into your text while you are creating a
message.
To insert a space between characters, press the
key when the cursor blinks in the Text Area.
Scrolling
Adding a Word or Phrase onto the My
Words list
To move the cursor to the left or to right through
your text, press the Left or Right key.
1. Press the Select soft key when Add Word is
highlighted.
Clearing Strokes and Characters
2. Enter a word or phrase using Pinyin, Quick
English or Stroke mode and press the OK soft
key.
Press the C key one or more times to remove
strokes to the left. When the Key Stroke Field is
empty, pressing the C key removes characters
from the Text Area.
For further details about each mode, see
page 49, page 52 or page 57 respectively.
55
54
Entering Text
Entering Text
3. Enter a character to assign a name to the
word you added. If necessary, press the C key
to clear the characters.
Using My Words Options
1. Select a word or phrase from the My Words
list and press the Options soft key.
4. Press the OK soft key.
2. Scroll to one of the following options and
The word or phrase is added to the My Words
list. The item is saved separately, depending
on the mode you select.
press the Select soft key:
• Edit Phrase: allows you to change the
word or phrase and then the name assigned
to the item.
Using My Words
• Create Phrase: allows you to add a new
word or phrase.
1. Press the right soft key when you are creating
text.
• Delete Phrase: allows you to delete the
item. When a confirming message appears,
press the Yes soft key.
2. Select My Words using the Up or Down key
and press the Select soft key.
• Select Phrase: allows you to insert a word
or phrase to your text.
3. Press the
key to select the mode you want.
4. Select the word you want using the Up or
Down key.
Or, enter a few letters of the name you want
to find. The word you added displays.
Using Quick English Mode
5. Press the Select soft key. The word is
This mode allows you to enter English words
with only one key press per letter. Each key on
the keypad has more than one letter; for
example, when you press the 5 key once, J, K,
or L displays. Quick English mode automatically
compares your key presses to an internal
linguistic database to determine the correct
word.
inserted in your text.
The English mode requires far fewer keystrokes
than the traditional multi-tap method, English
mode.
57
56
Entering Text
Entering Text
1. Press keys on the phone just once per letter.
For example, to enter “HELLO,” press the 4,
3, 5, 5 and 6 keys.
Changing the Case
To change the case of the letters, use the
key. There are three cases; Capital Lock( ),
Lower case( ) and Initial Capital( ).
The word that you are typing appears on the
display. It may change with each key that you
press.
Scrolling
2. Type the complete word before editing or
deleting any keystrokes.
You can move the cursor through the text by
using the Left or Right keys.
3. If the word is correct, insert a space by
pressing the
next word.
key and start entering the
Clearing Letters and Words
To delete letters, press the C key. Press and hold
the C key to clear the display.
Otherwise, press the 0,
repeatedly to display alternative word choices
for the keys that you pressed.
or
key
Down
Up
Example: Both “OF” and “ME” use the 6 and
3 keys. The phone displays the most
commonly used choice first.
Using English Mode
When typing in English mode, press the key
labelled with the character you want:
-Once for the first character
-Twice for the second character
and so on. This method is called Multi-tap
typing.
To type words not found in Quick English mode,
change Text input mode to English mode.
Smart Punctuation
For example, you need to press the 2 key three
times to display the character “C” and the 5 key
two times to display the character “K.”
To enter periods, hyphens or apostrophes, press
the 1 key. Quick English mode applies grammar
rules to ensure that the correct punctuation is
used.
The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to
the right automatically, and then select the next
letter.
Example: The 1 key is used twice to display two
punctuation marks:
You can insert a space between the words by
pressing the
key.
59
58
Entering Text
Entering Text
Refer to the table below for more information
about the characters available:
Using Malay Mode
This mode allows you enter Malaysian words by
pressing only one kkey per ech letter. You can
enter letters the same way as in Quick English
mode. For further details, see page 56.
Characters in the Order Displayed
Key
Upper Case
Lower Case
Space
Using Number Mode
Number mode enables you to enter numbers in
your text, such as a telephone number. Press the
keys corresponding to the digits you want before
manually switching back to the appropriate text
input mode.
Using Symbolic Mode
Symbolic mode enables you to insert symbols in
your text.
Changing the Case
To change the case of the letters, use the
key. There are three cases; Capital Lock( ),
Lower case( ) and Initial Capital( ).
To
Press the
select a symbol
corresponding number
key.
Scrolling
display more symbols
clear the symbol(s)
Up or Down key.
You can move the cursor through the text by
using the Left and Right keys.
C key. When the input
field is empty, this key
returns the screen to
the previous mode.
Clearing Letters and Words
To delete letters, press the C key. Press and hold
the C key to clear the display.
insert the symbol(s)
into your text
OK soft key.
cancel your input
and return to
Back soft key.
the previous mode
61
60
Entering Text
Options During a Call
Using Help
Your phone provides a number of control
functions that you can use during a call.
On-screen help is available by selecting Help
from the input mode menu. Use the Up and
Down keys to scroll through the Help
information.
Putting a Call on Hold
You can place the current call on hold whenever
you want. You can make another call while you
have a call in progress if your network supports
this service.
To place a call on hold, simply press the Hold
soft key. You can reactivate the call whenever
you want, by pressing the Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial
or look it up in Phone Book.
For details about searching for a number in
Phone Book, see page 38.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or,
1. Put the current call on hold by pressing the
Hold soft key.
2. Make the second call in the normal way.
63
62
Options During a Call
Options During a Call
When you have an active call and a call on hold,
you may switch between the two calls, changing
the one on hold to active and placing the other
on hold.
Switching the Microphone Off
(Mute)
You can temporarily switch your phone’s
microphone off so that the other person on the
phone cannot hear you.
To switch between the two calls, simply press
the Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
Example: You wish to say something to another
person in the room but do not want
the person on the phone to hear you.
When you want to finish, end each call normally
To switch the microphone off temporarily:
by pressing the
key.
1. Press the Options soft key.
2. If necessary, press the Down key to highlight
Using the Menu Functions
the Mute option.
During a call, you can access the main menu
functions.
3. Press the OK soft key.
The other person can no longer hear you.
1. Press the Options soft key.
To switch the microphone back on:
2. Press the OK soft key when the Menu option
1. Press the Options soft key.
highlights.
2. If necessary, press the Down key to highlight
3. Press the Up or Down key to scroll through
the menu list.
the Unmute option.
3. Press the OK soft key.
Note: You cannot use some menus during a
call. They are deactivated on this list.
The other person can hear you again.
4. When the menu you want highlights, press
the Select soft key.
5. If the selected menu has sub-options, repeat
steps 3 and 4.
For further details about the menu functions
available, see the list on page 73.
65
64
Options During a Call
Options During a Call
Muting or Sending Key Tones
Searching for a Number in Phone
Book
These options allow you to turn the key tones off
or on. If the Mute Keys option is selected, your
phone does not transmit the DTMF (Dual Tone
Multi-Frequency) tones of the keys, which allows
you to press keys without hearing annoying key
tones during a call.
You can search for a number in Phone Book
during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the
Note: To communicate with answering machines or
computerised telephone systems, the Send
Keys option must be selected.
Phonebook option.
3. Press the OK soft key.
The Phone Book entries are listed.
Sending a Sequence of DTMF Tones
4. Enter the name that you wish to find.
If you enter the first few letters of the name,
the Phone Book entries are listed, starting
with the first entry matching your input.
You can send the DTMF tones after entering the
entire numbers you need to send.
This option is helpful for entering a password or
an account number when you call an automated
system, like a banking service.
5. To view the highlighted entry, press the View
soft key.
For further details about the Phone Book feature,
see page 34.
To send the DTMF tones:
1. When you are connected to the teleservice
system, press the Options soft key.
2. Press the Down key to highlight the Send
Using the SMS Service
DTMF option.
If you receive an SMS (Short Message Service)
3. Press the OK soft key.
message during a call, the Message icon (
)
4. Enter the number you want to send and press
flashes on the display. The SMS Service option
enables you to read the message. You can also
write a new text message.
the OK soft key.
The tones are sent.
For further details about the SMS service, refer
to page 79.
67
66
Options During a Call
Options During a Call
3. To join the first participant to the multi-party
call, press the Options soft key and select
the Join option. Press the OK soft key.
Call Waiting
You can answer an incoming call while you have
a call in progress, if your network supports this
service and you have set the Call Waiting menu
(Menu 8.3) to Activate; see page 152. You are
notified of an incoming call by a call waiting
tone.
4. To add a new person to the multi-party call,
call the person in the normal way and press
the Options soft key. Select the Join option
and press the OK soft key.
You can add incoming callers by answering the
call, pressing the Options soft key, and
selecting the Join option. Repeat as required.
To answer a call while you have a call in
progress:
1. Press the
key to answer the incoming call.
Having a Private Conversation With
One Participant
The first call is automatically put on hold.
2. To switch between the two calls, press the
1. Press the Options soft key and choose the
Swap soft key.
Select One option. Press the OK soft key.
3. To end the call on hold, press the Options
The list of the call participants appears.
soft key and select the End Held Call option.
2. Highlight a person from the list by pressing
To end the current call, press the
key.
the Up or Down key, and press the Select
soft key or the
key.
Making a Multiparty Call
3. When the Private option highlights, press the
OK soft key.
A multi-party call is a network service that
allows up to six people to take part
simultaneously in a multi-party or conference
call. For further details about subscribing to this
service, contact your service provider.
Now you can talk privately to that person.
The other participants can still converse with
each other.
4. To return to the multi-party call, press the
Options soft key and select the Join option.
Press the OK soft key.
Setting up the Multiparty Call
All the multi-party call participants can now
hear each other.
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
69
68
Options During a Call
Using the Menus
Dropping One Participant
The phone offers a range of functions that allow
you to tailor it to your needs. These functions are
arranged in menus and sub-menus.
1. Press the Options soft key and choose the
Select One option. Press the OK soft key.
The menus and sub-menus can be accessed by
scrolling using the Navigation keys or by using the
shortcuts.
The list of call participants appears.
2. Highlight a person from the list by pressing
the Up or Down key, and press the Select
Accessing Menu Functions by Scrolling
soft key or the
key.
3. Press the Down key to select the Remove
1. In Idle mode, press the Menu soft key to
option and press the OK soft key.
access Menu mode.
The call ends with that participant, but you
can continue to talk to the others.
2. Scroll using the Up or Down key to reach a main
menu, Phone Settings for example. Press the
Select soft key or the Right key to enter the
menu.
4. When you want to end the multi-party call,
close the folder or press the
key.
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling using
the Up or Down key and pressing the Select
soft key or the Right key.
If the menu that you have selected contains
further options, repeat this step.
4. To
scroll through the
menus
Press the
Up or Down key or use
the Volume keys.
confirm the chosen
setting
Select soft key or
the Right key.
return to the
previous menu level
soft key or the Left
key.
exit the menu
without changing
the settings
key.
71
70
Using the Menus
Using the Menus
Using Shortcuts
List of Menu Functions
The following list shows the menu structure
available and indicates the number assigned to
each option and the page where you can find a
description of each feature.
The menu items, such as menu, sub-menus and
options, are numbered and can be accessed
quickly by using their shortcut numbers. The
shortcut number is shown at the bottom right
next to the
soft key on the display. Simply
Note: If you use a SIM AT card that provides
additional services, the SIM AT menu
displays when you press the Menu soft key
to enter Menu mode. For further details, see
your SIM card instructions.
press the Menu soft key and enter the number
of the menu you want.
Notes:
• The numbers assigned to each menu are
indicated on the list on page 73. They may not
match the menu number on the phone,
depending on the services supported by your SIM
card.
1. Text Messages (see page 79)
1.1 Inbox
1.2 Outbox
1.3 Write New
• For the menu number 10, press the 0 key.
1.4 Templates
1.5 Settings
Example: Accessing the Language menu.
1. Press the Menu soft key.
1.5.1 Setting 1*
1.5.2 Setting 2*
1.5.3 Common Setting
1.6 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.8 Voice Mail
2. Press 6 for Phone Settings.
3. Press 5 for Language.
The languages available displays.
1.8.1 Connect to Voice Server
1.8.2 Voice Server Number
1.9 Broadcast
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
* Shown only if supported by your SIM card.
73
72
Using the Menus
Using the Menus
2. Multimedia MSGs. (see page 91)
4. Camera (see page 110)
4.1 Take Photos
4.2 My Photos
4.3 Take Videos
4.4 My Videos
4.5 Delete All
2.1 Inbox
2.2 Outbox
2.3 Draft
2.4 Write New
2.5 Templates
2.6 Delete All
4.6 Memory Status
2.7 Memory Status
2.8 Setup
2.8.1 Delivery Report
2.8.2 Read Reply
2.8.3 Auto Download
2.8.4 Message Acceptance
2.8.5 Hide ID
2.8.6 Expiry Date
2.8.7 Delivery Time
2.8.8 Priority
5. Sound Settings (see page 119)
5.1 Ring Tone
5.2 Ring Volume
5.3 Alert Type
5.4 Keypad Tone
5.5 Message Tone
5.5.1 SMS Tone
5.5.2 SMS-CB Tone
5.5.3 MMS Tone
5.6 Folder Tone
5.7 Power On/Off
5.8 Alerts on Call
5.9 Extra Tones
2.8.9 Report Allowed
2.8.10 Page Duration
2.9 MMS Profile
3. Call Records (see page 105)
3.1 Missed Calls
3.2 Received Calls
3.3 Dialled Calls
3.4 Delete All
6. Phone Settings (see page 124)
6.1 Infrared Activate
6.2 Display Settings
6.2.1 Wallpaper
3.5 Call Time
3.5.1 Last Call Time
3.5.2 Total Sent
3.5.3 Total Received
3.5.4 Reset Timers
3.6 Call Cost*
6.2.2 Front LCD
6.2.3 Menu Style
6.2.4 Back Light
6.2.5 Service Light
6.2.6 Graphic Logo
6.3 Greeting Message
6.4 Own Number
6.5 Language
3.6.1 Last Call Cost
3.6.2 Total Cost
3.6.3 Max Cost
3.6.4 Reset Counters
3.6.5 Set Max Cost
3.6.6 Price/Unit
* Shown only if supported by your SIM card.
75
74
Using the Menus
Using the Menus
6. Phone Settings (continued)
8. Network Services (see page 148)
8.1 Call Diverting
8.1.1 Divert Always
6.6 Security
6.6.1 PIN Check
6.6.2 Change PIN
6.6.3 Phone Lock
6.6.4 Change Password
6.6.5 SIM Lock
8.1.2 Busy
8.1.3 No Reply
8.1.4 Unreachable
8.1.5 Cancel All
6.6.6 Privacy
8.2 Call Barring
6.6.7 FDN Mode*
6.6.8 Change PIN2*
6.7 Extra Settings
6.8 Short Cut
8.2.1 All Outgoing
8.2.2 International
8.2.3 International Except to
Home
8.2.4 All Incoming
8.2.5 Incoming While Abroad
8.2.6 Cancel All
6.9 Reset Settings
7. Organiser (see page 135)
8.2.7 Change Barring
Password
7.1 Alarm
8.3 Call Waiting
8.4 Network Selection
8.5 Caller ID
8.6 Closed User Group
8.6.1 Index List
8.6.2 Outside Access
8.6.3 Default Group
8.6.4 Deactivate*
8.7 Band Selection
7.1.1 Once Alarm
7.1.2 Daily Alarm
7.1.3 Morning Call
7.1.4 Remove Alarm
7.1.5 Autopower
7.2 Calendar
7.3 Time & Date
7.3.1 Set Time
7.3.2 Set Date
7.3.3 World Time
7.3.4 Time Format
7.3.5 Date Format
7.4 Calculator
7.5 To Do List
7.6 Voice Memo
7.6.1 Record
7.6.2 Memo List
7.6.3 Delete All
7.6.4 Memory Status
7.7 Currency Exchange
* Shown only if supported by your SIM card.
* Shown only if the Close User Group feature is active.
77
76
Using the Menus
Text Messages
9. Funbox (see page 157)
Short Message Service (SMS) allows you to send
and receive short text messages to and from
other GSM mobile phones. In addition, your
phone supports the Enhanced Messaging Service
(EMS), which enables you to include simple
photos, melodies, and animated images in your
messages. To use this feature, you must
subscribe to your service provider’s message
service.
9.1 WAP Browser
9.1.1 Home
9.1.2 Favorite
9.1.3 http://
9.1.4 Settings
9.1.5 Clear Cache
9.1.6 Push Message
9.2 Games & More
9.3 Sounds
9.4 Images
9.5 Delete All
9.6 Memory Status
When the Text Message icon (
) appears, you
have received new text messages. If the
memory is full, an error message displays and
you cannot receive any new messages. Use the
Delete option in each message box to delete the
obsolete ones.
Note: You can quickly enter the Text Messages
menu by pressing the Left key in Idle mode.
Inbox (Menu 1.1)
This message box is used to store the messages
that you have received.
When you enter this menu, the list of messages
in the box displays with the senders’ phone
numbers or names, if available in your Phone
Book.
1. Select a message from the list and press the
View soft key to read the message contents.
2. To scroll through the contents, press the Up
or Down key.
3. To scroll to the previous or next messages,
press the
or
key.
79
78
Text Messages
Text Messages
While reading a message, you can choose the
following options by pressing the Options soft
key:
Outbox (Menu 1.2)
This message box is used to store the messages
that you have already sent or will send.
Delete: allows you to delete the message.
Send: allows you to send/resend the message.
For further details about how to send a
message, see page 82.
When you enter this menu, the list of messages
in the box displays with the recipients’ phone
numbers or names, if available in your Phone
Book.
Text Reply: allows you to reply to the sender
by sending a text message.
1. Select a message from the list and press the
Call Back: allows you to call the sender back.
View soft key to read the message contents.
Cut Address: allows you to extract the sender’s
number and URL, e-mail addresses or phone
numbers from the message text.
2. To scroll through the contents, press the Up
or Down key.
3. To scroll to the previous or next messages,
Move to Phone: allows you to move the
message from the SIM card to the phone’s
memory. This option is only available when you
select a message stored in the SIM card.
press the
or
key.
While reading a message, you can choose the
following options by pressing the Options soft
key:
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a
message stored in the phone’s memory.
Delete: allows you to delete the message.
Send: allows you to send/resend the message.
For further details about how to send a
message, see page 82.
Select Objects: allows you to save media
objects, such as sounds or images, from the
message into your phone. You can use the
objects when writing a message. For details, see
page 84.
Cut Address: allows you to extract the
destination number and URL, e-mail addresses
or phone numbers from the message text.
Move to Phone: allows you to move the
message from the SIM card to the phone’s
memory. This option is only available when you
select a message stored in the SIM card.
81
80
Text Messages
Text Messages
Move to SIM: allows you to move the message
from the phone’s memory to the SIM card. This
option is only available when you select a
message stored in the phone’s memory.
• Save Only: allows you to save the
message so that it can be sent later. You
can read the message in your Outbox.
• For further details about Add Objects, Add
Templates, Add Phonebook and Add
Bookmark options, see page 84.
Select Objects: allows you to save media
objects, such as sounds or images, from the
message into your phone. You can use the
objects when writing a message. For details, see
page 84.
3. Select Send Only or Save and Send, and
press the Select soft key.
If you want to just save the message, select
Save Only. After saving the message, the
phone returns to the Text Messages menu
screen.
Write New (Menu 1.3)
In this menu, you can write and send a text
message.
4. If you select a save option, choose the
memory location and press the OK soft key.
Notes:
5. Enter a destination number and press the OK
• You can quickly enter this menu by pressing and
holding the Left key in Idle mode.
soft key.
• When you add media objects to the message, the
number of characters you can enter decreases.
The message is sent.
Note: When the phone fails to send the message,
it asks you if you want to retry. Press the
OK soft key to confirm. Otherwise, press the
Exit soft key to return to the Write New
screen.
Creating a Simple Text Message
1. Create your message.
Note: For further details about entering
characters, see page 46.
Creating a Message using the Options
2. When you finish entering the message, press
the Options soft key. The following options
are available:
1. Create your message.
2. Press the Options soft key.
• Send Only: allows you to send the
message. The message is deleted after
sending.
• Save and Send: allows you to save a copy
of the message and then send the message.
You can read the message in your Outbox.
83
82
Text Messages
Text Messages
3. Select one of the following options by using
the Up and Down keys and pressing the
Select soft key:
Templates (Menu 1.4)
Using this menu, you can preset a maximum of
five messages that you use most frequently.
• Add Objects: allows you to add a sound,
melody, picture or animated image to the
message. Select the category of the object
to be added. In each category, you can
select from the various factory-set items or
choose an item received from other
sources, such as the Internet or other
phones.
Select an empty location or the message
template you want and press the Select soft
key.
Edit: allows you to write a new message or edit
the message.
Note: For further details about how to enter
• Add Templates: allows you to apply one of
the preset message templates to the text.
Select one of five messages stored in the
Templates menu (Menu 1.4). For further
details, see page 85.
characters, see page 46.
Send Message: allows you to retrieve the
message. Once you have completed the
message, you can send, save and send, or
simply save it. For further details about how to
send a message, see page 82.
• Add Phonebook: allows you to add a
Phone Book entry to your message. Select
one from the list.
Delete: allows you to delete the message. You
are asked to confirm the deletion by pressing the
Yes soft key.
• Add Bookmark: allows you to add a web
page address stored in your Favorite list
(Menu 9.1.2). Select one from the list.
Settings (Menu 1.5)
4. Complete the message, and send or save it by
following the procedure from step 2 on page
82.
In this menu, you can set up default message
information. A setting group is a collection of
settings required to send messages. The number
of setting groups available depends on the
capacity of your SIM card.
Notes:
• The setting options available in this menu may
be different depending on your service
provider.
• The last setting you accessed is automatically
activated for sending messages.
85
84
Text Messages
Text Messages
Setting x (where x is the setting group
number): each group has its own sub-menu.
Delete All (Menu 1.6)
This menu allows you to delete all of the text
messages in each message box. You can also
delete all of your messages at one time.
Service Centre: allows you to store or change
the number of your message centre, which is
required when sending messages. You must
obtain this number from your service provider.
To
Press the
Default Destination: allows you to store the
default destination number. The number
automatically displays on the Destination screen
when you create a message.
select a message box
to clear
Up or Down key.
To delete all of your
messages, select All
Messages.
Default Type: allows you to set the default
message type to Text, Fax, Email or Paging.
The network can convert the messages into the
selected format.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
Delete soft key.
Default Validity: allows you to set the length of
time your text messages are stored in the
message centre while attempts are made to
deliver them.
delete the marked
messages
When a confirming message displays, press the
Yes soft key to confirm.
Setting Name: allows you to give a name to the
setting group currently being defined.
Common Setting: The following options are
available:
Memory Status (Menu 1.7)
This menu shows how many messages are
currently stored in the SIM, PHONE and CB (Cell
Broadcast) memories.
Reply Path: allows the recipient of your message to
send you a reply through your message centre, if
your network supports this service.
Delivery Reports: allows you to activate or
deactivate the report function. When this function
is activated, the network informs you whether or
not your message has been delivered.
Bearer Selection: allows you to choose either GSM
or GPRS, depending on your network.
87
86
Text Messages
Text Messages
Voice Mail (Menu 1.8)
Broadcast (Menu 1.9)
This menu allows you to access your voice
mailbox, if your network supports this service.
This network service allows you to receive text
messages on various topics, such as the weather
or traffic. Cell Broadcast (CB) messages display
as soon as they are received, provided that:
The following options are available:
• the phone is in Idle mode.
Connect to Voice Server: before using the
Voice Mail feature, you must enter the voice
server number obtained from your service
provider; see menu 1.8.2. You can then select
this option and press the OK soft key to listen to
your messages.
• the Receive option is set to Enable.
• the message channel is currently active on the
channel list.
The following options are available:
You can quickly connect to the voice server by
pressing and holding the 1 key in Idle mode.
Read: lets you view the received message. The
Volatile box displays the messages from the
network, but loses its contents as soon as the
phone is switched off. Scroll through the
message by using the Up and Down keys. While
reading a message, press the Save soft key to
store the message in the Archive box for later
retrieval.
Voice Server Number: allows you to change
the voice mail server number, if necessary.
To
Press the
enter the server
number
corresponding
numeric keys.
Receive: allows you to enable or disable the
reception of broadcast messages.
correct a digit
C
key.
Channel List: allows you to indicate the
channels from which you wish to receive
broadcast messages. The following options are
available:
move the cursor to
the left or right without
clearing the digit
Left and Right key.
Select: use to enable or disable channels on the
list by marking or unmarking them respectively.
A check mark displays in front of each selected
channel.
save the number
OK key.
Note: Voice Mail is a network feature. Please
contact your service provider for further
details.
Add Channel: use to enter the ID and title for a
new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an
existing channel.
89
88
Text Messages
Multimedia Messages
Language: allows you to select your preferred
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides automatic and immediate
delivery of personal multimedia messages from
phone to phone or from phone to e-mail.
language to display cell broadcast messages.
Please contact your service provider for further
details.
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and audio clips. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Using the MMS feature, your phone can receive
and send messages that contain multimedia files,
such as your photos, sounds and images you
downloaded from the Internet and voice memos
you recorded. This function is available only if it is
supported by your service provider. Only phones
that offer multimedia message features can
receive and display multimedia messages.
Inbox (Menu 2.1)
Viewing a Message When You Receive it
When a new multimedia message comes in, the
display shows the MMS Message icon ( ) and a
text notification along with the sender’s number.
1. Press the View soft key to view brief
information about the message, such as the
sender’s number, the message size and the
subject.
If you want to view the message later in the
Inbox, press the Exit soft key.
91
90
Multimedia Messages
Multimedia Messages
2. To scroll through the message information,
press the Up or Down key.
1. Select a message on the list and press the
Select soft key.
3. Press the Options soft key to use the
2. Press the OK soft key to go to the message
following options:
view screen.
• Retrieve: retrieves the message from the
MMS server.
Or, the display will automatically switch to the
screen.
• Delete: deletes the message.
3. To scroll through the message, press the Up
or Down key.
• More Properties: shows you detailed
information about the message.
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
4. To read the message, press the Select soft
key when Retrieve is highlighted.
While viewing a message, you can choose the
Message options by pressing the Options soft
key.
Your phone retrieves the message contents
from the server and displays it.
5. To scroll through the message, press the Up
or Down key.
If you are viewing a new message, the options
are the same as when you view a message as
soon as you receive it. See page 92.
6. When you are finished, press the
key.
When you are reviewing a message retrieved
from the MMS server, the following options are
available:
Viewing a Received Message in the
Inbox
Delete: deletes the message.
When you access the Inbox menu (Menu 2.1),
the list of multimedia messages you received
displays with the senders’ phone numbers, if
they are available in your Phone Book, or
subjects. The icons on the left tell you the status
of the messages.
Reply: allows you to reply to the sender by
sending a text or multimedia message.
Call Back: allows you to call the sender back.
Cut Address: allows you to extract the sender’s
number or e-mail address and URL, e-mail
addresses or phone numbers from the message
text.
•
•
: Messages that have been opened.
: Messages that are unopened.
93
92
Multimedia Messages
Multimedia Messages
Forward: allows you to forward the message to
another person.
2. Press the OK soft key to go to the message
view screen.
Save Picture: allows you to save an image from
the message into your phone. Images are stored
in the Images folder (Menu 9.4).
Or, the display will automatically switch to the
screen.
3. To scroll through the message, press the Up
or Down key.
Save Sound: allows you to save a sound from
the message into the Sounds folder (Menu
9.3).
If the message has more than one page, you
can scroll through the pages by using the Left
and Right keys.
Properties: shows you information about the
message, such as the subject, sender’s e-mail
address or phone number, message size,
recipient’s e-mail address or phone number,
priority and the time and date when the
message was received.
While viewing a message, you can choose the
following options by pressing the Options soft
key:
Delete: deletes the message.
Cut Address: allows you to extract the
destination number or e-mail address and URL,
e-mail addresses or phone numbers from the
message text.
Outbox (Menu 2.2)
When you access this menu, the list of the
multimedia messages you sent or saved
displays. The icons on the left tell you the status
of the messages.
Send: allows you to send/resend the message.
Edit Message: allows you to change the
message contents, sound, picture or text.
•
•
•
•
: Messages currently being sent
: Messages sent
Properties: shows you information about the
message, such as the status, subject, sender’s
e-mail address or phone number, message size,
and the time and date when the message was
sent.
: Messages your phone couldn’t send
: Messages to be sent
•
: Messages deferred
1. Select a message on the list and press the
Select soft key.
95
94
Multimedia Messages
Multimedia Messages
• Add Picture: allows you to add a picture
stored in the Images folder (Menu 9.4).
Choose a picture and press the Select soft
key. You may not be able to add some
downloaded images if they are not in the
correct format.
Draft (Menu 2.3)
After creating a multimedia message, you can
store it in this message box to be sent later.
For further details about viewing a message, see
“Outbox” on page 94.
• Add Sound: allows you to add a voice
memo. Select Record to record a new voice
memo. If you have voice memos recorded,
you can select Sound List to add one of
them.
Write New (Menu 2.4)
• Send: allows you to send the message. Use
this option when you finish creating the
message.
This menu allows you to create a new
multimedia message and then send it to multiple
destinations.
• Save: saves the message in the Draft
(Menu 2.3) or Templates (Menu 2.5) box
for later use. This option is activated after
you add content to the message.
Creating and Sending a Multimedia
Message
• Settings: allows you to change the
message settings. For further details about
each setting option, see page 102. After
changing the settings, you need to press
1. Enter the subject of your message and press
the OK soft key.
For further details about entering characters,
see page 46.
the
soft key or the C key to go to back
to the options screen.
2. When Add Here highlights, press the
Options soft key and add the message
contents using one of the following options:
• Add Destination: allows you to enter
destination numbers or addresses. See
steps 6 to 11. After adding them, you need
• Add Text: enter the message text and
press the OK soft key.
to press the
soft key or the C key to go
to back to the options screen.
• Add My Photo: allows you to add a photo
you took using the camera on your phone.
Select Take a Photo to take a new photo,
or Select a Photo to add one of the photos
stored in the phone. For further details
about using the camera, see page 110.
• Preview: shows your message as it will
display on the recipient’s phone.
Note: You can add text, an image and a sound
once for each page.
97
96
Multimedia Messages
Multimedia Messages
3. Repeat step 2 until you finish creating your
message.
• Settings: allows you to change the
message settings. For further details about
each setting option, see page 102.
4. If you want to change the added items, press
the Up or Down key to highlight one and
press the Options soft key.
• Add Destination: allows you to enter
destination addresses. See steps 6 to 11.
• Preview: shows your message as it will
display on the recipient’s phone.
Note: The options available are different,
depending on whether the item you select
on the message screen is text, an image,
a sound or the Page field.
5. When you are finished creating the message,
choose Send from the options and press the
Select soft key.
The following options are available:
6. Select a destination type, To, Cc or Bcc, and
• Edit Text/Picture/Sound: allows you to
change the text or replace the image or
sound with another one.
press the Select soft key.
7. Choose one of the following options and press
• Add Page: allows you to add more pages.
After you add a page, the display shows
you the current page number and the
memory space used for the page. You can
move to each page using the Left or Right
key on the message screen.
the Select soft key:
• Phone Number: allows you to enter the
phone number you want.
• E-Mail: allows you to enter the e-mail
address of the recipient.
• Delete: deletes the item from your
message.
• Phone Book: allows you to retrieve a
number from your Phone Book.
• Duration: allows you to set when and how
long text, an image or a page displays on
the message presentation screen. If you set
a length of time shorter than the duration of
a content item for the page duration, the
content duration is automatically decreased.
8. Enter a number or an e-mail address, or
select a number from Phone Book.
9. When the correct number or address displays,
press the OK soft key.
• Send: allows you to send the message.
10. To add a destination, press the Select soft
key when Add Destination highlights.
Repeat from step 7.
• Save: saves the message in the Draft
(Menu 2.3) or Templates (Menu 2.5) box
for later use.
If you want to edit the destinations, select
one and press the Select soft key. You can
change or delete it.
99
98
Multimedia Messages
Multimedia Messages
11. To enter additional numbers or addresses to
Delete All (Menu 2.6)
the other destination types, press the C key
or the
through 10.
soft key and repeat steps 6
This menu allows you to delete all of the
multimedia messages in each message box. You
can also delete all of your messages at one time.
You can enter up to 10 destinations each for
To, CC and Bcc.
To
Press the
12. When you are finished entering the
destinations, select Send Message and
press the Select soft key.
select a message box
to clear
Up or Down key. To
delete all of your
messages, select All
Messages.
Your phone sends the message.
place a check mark
Mark soft key.
Templates (Menu 2.5)
remove a check mark
Unmark soft key.
Delete soft key.
delete the marked
messages
This menu stores messages you saved as
templates so that you can use them to make
new messages.
When a confirming message displays, press the
Yes soft key to confirm.
1. Scroll through the template list using the Up
or Down keys.
2. When the message template you want
Memory Status (Menu 2.7)
highlights, press the Select soft key.
You can check the amount of the memory being
used and the memory remaining for multimedia
messages.
3. Press the OK soft key to use the following
options, or the display will automatically show
the options after a specified time:
• Edit Message: allows you to send a
message using the template. For further
details about how to send a message, see
page 96.
Each time you press the Next soft key, the
display shows the total space, including the used
and free space. It also shows how much space is
currently occupied by each message box.
• Delete: allows you to delete the message.
You are asked to confirm the deletion by
pressing the Yes soft key.
4. Press the
100
key to return to Idle mode.
101
Multimedia Messages
Multimedia Messages
Page Duration: you can set the length of time
one page of an outgoing message displays on the
message presentation screen. After a specified
time, the display automatically scrolls to the next
page.
Setup (Menu 2.8)
You can change the default settings for sending or
receiving multimedia messages.
The following options are available:
Delivery Report: when this option is enabled,
the network informs you whether or not your
message has been delivered.
MMS Profile (Menu 2.9)
In this menu, you can configure various network
settings that are required when you send or
receive multimedia messages.
Read Reply: when this option is enabled, your
phone sends a request for a reply along with your
message to the recipient.
Notes:
Auto Download: you can set whether or not
your phone retrieves new incoming messages
from the MMS server without notifications. When
this option is enabled, the phone automatically
retrieves new messages from the server. As soon
as you receive a message, you can use more
options while you are reading. See page 93 for
further details about the options.
•
The last profile you accessed is automatically
activated for sending messages.
• If you change the MMS settings without first
checking with your service provider, the MMS
feature may not work properly.
The following options are available for each
profile:
Message Acceptance: you can specify the
category of messages you want to receive.
Profile Name: enter a name that you wish to
assign to the MMS server.
Hide ID: when this option is enabled, your phone
number does not display on the recipient’s phone.
Connection URL: enter the address of your MMS
server.
Expiry Date: you can select the length of time
your messages are stored in the message centre
after they are sent.
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose Non-
Secure.
Delivery Time: you can set a delay time before
the phone sends your messages.
IP Address: enter the gateway address required
to connect to the MMS server.
Priority: you can select the priority level of your
messages.
User Name: enter the user ID required to
connect to the MMS server.
Report Allowed: when this option is enabled, the
sender of an incoming message receives a
delivery report from the network.
103
102
Multimedia Messages
Call Records
Password: enter the password required to
connect to the MMS server.
In this menu, you can view the:
• calls you missed, received or dialled.
• length of your calls.
APN: enter the access point name used for the
address of the MMS server.
• cost of your calls.
For further details, contact your service provider.
Notes:
•
You can access the numbers in the three types of
call records by pressing the
key in Idle mode.
• The number of call records the phone can
store may be different depending on your SIM
card.
Missed Calls (Menu 3.1)
This menu lets you view the last 20 numbers of
the calls you received, but did not answer.
The number or name, if available, display
together with the time and date when the call
was received.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save
it in Phone Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
104
105
Call Records
Call Records
Received Calls (Menu 3.2)
Delete All (Menu 3.4)
This menu lets you view the last 20 numbers of
the calls you received.
This menu allows you to delete all of the records
in each call record. You can also delete all of
your call records at one time.
The number or name, if available, display
together with the time and date when the call
was received.
To
Press the
select a call record
to clear
Up or Down key. To
delete all of your call
records, select All
Calls.
By pressing the Options soft key, you can:
• edit the number, if available, and dial it or save
it in Phone Book.
• delete the call from the list.
place a check mark
Mark soft key.
You can also dial the number by pressing the
key.
remove a check mark
Unmark soft key.
Delete soft key.
delete the marked
records
Dialled Calls (Menu 3.3)
When a confirming message displays, press the
Yes soft key to confirm.
This menu lets you view the last 20 numbers
you dialled.
The number or name, if available, display
together with the time and date when the call
was made.
By pressing the Options soft key, you can:
• edit the number and dial it or save it in Phone
Book.
• delete the call from the list.
You can also dial the number by pressing the
key.
106
107
Call Records
Call Records
Call Time (Menu 3.5)
Call Cost (Menu 3.6)
This menu lets you view the timers for calls
made and received.
This network feature lets you view the cost of
calls. This menu may not be available depending
on your SIM card.
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so on.
The following options are available:
Last Call Cost: cost of the last call you made.
Total Cost: total cost of all calls you made since
the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max
Cost option, you can no longer make any calls
until you reset the counter.
The following options are available:
Last Call Time: length of the last call.
Total Sent: total length of all calls you made
since the timer was last reset.
Max Cost: maximum cost set in the Set Max
Cost option. See below.
Total Received: total length of all calls you
received since the timer was last reset.
Reset Counters: option used to reset the cost
counter. You must first enter your PIN2 (see
page 175) and then press the OK soft key.
Reset Timers: option used to reset the call
timers. You must first enter the phone password
and then press the OK soft key.
Set Max Cost: option used to enter the
maximum cost that you authorise for your calls.
You must first enter your PIN2 (see page 175)
and then press the OK soft key.
Note: The password is preset to “00000000” at the
factory. To change this password, see page
130.
Price/Unit: option used to set the cost of one
unit; this price per unit is applied when
calculating the cost of your calls. You must first
enter your PIN2 (see page 175) and then press
the OK soft key.
108
109
Camera
Camera
2. Adjust the image by aiming the camera at the
subject.
Using the camera module embedded in your
phone, you can take photos of people or events
while on the move. Additionally, you can send
photos to other people in a multimedia message
or set one as a wallpaper.
• Use the Left and Right keys to adjust the
brightness of the image.
• Use the Up and Down keys to zoom in or
out.
You can also record videos using the phone as a
camcorder.
• Use the Up and Down Volume keys on the
left side of the phone to flip the image
vertically and horizontally.
Note: You can quickly access the Camera menu by
pressing the Camera key ( ) on the right
side of the phone in Idle mode.
• Use the 1 key to quickly access the Take
Videos menu.
CAUTION:
• Do not take photos of people without their
permission.
• Use the 2 key to set the image size.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you may
interfere with another person’s privacy.
• Use the 3 key to select the image quality.
• Use the 4 key to set the Night Shot mode.
• To use the camera options, press the right
soft key. For details, see page 112.
Take Photos (Menu 4.1)
3. Press the left soft key or Camera key to take
the photo.
In this menu, you can take a photo. The camera
produces JPEG photos.
4. Press the Save soft key.
Note: When you take a photo in direct sunlight or
in bright conditions, shadow may appear on
the photo.
To discard the photo and return to Capture
mode, press the Cancel soft key.
7. To
use the photo
Press the
Taking a Photo with the Folder Open
Options soft key. For
further details, see
page 112.
options
1. Accessing the Take Photos menu turns on the
camera on the folder of the phone. Or you
can press and hold the Camera key ( ) on
the right side of the phone in Idle mode.
return to Capture
mode
Preview soft key or C
key.
The image to be captured appears on the
display.
return to Idle mode
keys.
110
111
Camera
Camera
When you press the Options soft key after
saving a photo, the following options are
available:
The following options are available:
Mode: allows you to take a photo in various
modes. Once you change the mode, its indicator
appears at the top left or centre of the display.
Send: allows you to send the photo using a
multimedia message. For further details, see
page 96.
Normal Shot: allows you take a photo in the
normal mode.
Set as: allows you to set the image as your
wallpaper for the idle screen, or a caller ID
image for Phone Book entries.
Multi Shot: allows you to take a series of action
stills. Select the capture speed, High Speed or
Normal Speed, and the number of photos the
camera will take. When you press the Camera
key, the camera takes photos successively.
Rename: allows you to change the name of the
photo.
Go to My Photos: allows you to view the
photos you took in the My Photos menu (Menu
4.2).
After taking photos, press the SaveAll soft key
to save all of them or the Select soft key to
save the selected one(s).
Delete: deletes the photo.
Matrix Shot: allows you to take several stills and
save them in one frame. It will save as one
image consisting of the multiple stills taken.
Protection: allows you to protect the photo
from being deleted.
Properties: shows the properties of the photo,
such as the file name, file size, date and time it
was saved, resolution and quality.
Night Shot: allows you to take a photo of the
best quality when it is dark.
Effects: allows you to change the colour tone or
apply special effects to the photo.
Using the Camera options
In Capture mode, you can use various options
by pressing the right soft key.
Frames: allows you to use a decorated frame.
Select a frame from the list using the Navigation
keys.
To
Press the
Timer: allows you to have a delay time before
the camera takes a photo. Select the length of
time you want. When you press the Camera key,
the camera takes the photo after a specified
time.
scroll to an option
Up or Down key.
select the highlighted Select soft key or the
option
Right key.
return to Capture
mode
soft key or C key.
112
113
Camera
Camera
Settings: allows you to change the default
settings for taking a photo.
My Photos (Menu 4.2)
This menu allows you to review your photos.
When you access this menu, your phone displays
them in Thumbnail mode, which shows photos
as small images.
Photo Size: allows you to select a photo size.
Photo Quality: allows you to change the image
quality.
Scroll through the photos using the Navigation
Shutter Sound: allows you to select a sound
when you press the shutter, the left soft key or
Camera key.
keys. The
icon indicates that it contains the
photos taken in Muti-shot mode. To view the
photos on the full screen, press the View soft
key. In this mode, you can scroll through the
photos using the Left and Right keys. To go back
to Thumbnail mode, press the Multi soft key.
Default Name: allows you to change the default
prefix of the photo name.
Help: shows you the functions of the Navigation
keys for adjusting an image.
Press the Options soft key to use the following
options:
Send: allows you to send the photo as a
multimedia message. For further details, see
page 96.
Taking a Photo with the Folder Closed
1. Close the folder.
Set as: allows you to set the image as your
wallpaper for the idle screen or a caller ID image
for Phone Book entries.
2. To turn the camera on, press and hold the
Camera key on the right side of the phone.
Rename: allows you to change the name of the
photo.
The image to be captured appears on the
external display.
Delete: deletes the photo.
3. Adjust the image by aiming the camera at the
subject.
Protection: allows you to protect the photo
from being deleted.
• Use the
key on the left side of the phone
to adjust the brightness of the image.
Properties: shows the properties of the photo,
such as the file name, file size, time and date it
was saved, photo size, quality and protection
status.
• Use the key on the left side of the phone
to zoom in or out.
4. Press the Camera key to take the photo.
The photo is automatically saved in the My
Photos menu (Menu 4.2).
114
115
Camera
Camera
Take Videos (Menu 4.3)
My Videos (Menu 4.4)
You can record a video that is currently displayed
on the camera screen and save it as an MPEG
file.
When you access this menu, the thumbnail
images of the videos display.
To play a video:
Recording a Video
1. Press the Navigation keys to scroll to the
video you want to view.
1. When the camera turns on, adjust the image
by aiming the camera at the subject.
2. Press the Play soft key to start playing the
video.
• Use the Left and Right keys to to adjust the
brightness of the image.
3. To
pause the playing
Press the
• Use the Up and Down keys to zoom in or out.
Pause soft key.
Continue soft key.
• Use the Up and Down Volume keys on the
left side of the phone to flip the image
vertically and horizontally.
resume
stop
• Use the 1 key to quickly access the Take
Photos menu.
Stop soft key or C
key.
2. Press the left soft key to start recording.
return to Idle mode
key.
3. When you are finished, press the left soft key.
Press the Options soft key to use the following
options:
The phone automatically stops when the
recording time expires. You can cancel your
recording by pressing the right soft key.
Rename: allows you to change the file name.
Delete: deletes the current video file.
4. Press the Save soft key.
Protection: allows you to protect the video
from being deleted.
The video is saved and the display returns to
Record mode.
Properties: show the properties of the video
file, such as the time and date it was saved, file
size, protection status and playing time.
116
117
Camera
Sound Settings
Delete All (Menu 4.5)
You can use the Sound Settings feature to
customise various settings, such as the:
This menu allows you to delete all of your photos
or videos. You can also delete all of them at one
time.
• ring melody, volume and type.
• sounds made when you press a key, receive a
message, open/close the folder or switch your
phone on or off.
To
Press the
• alert tone made every minute during a call,
when you make an error or when your call is
connected to the system.
select an item to clear
Up or Down key. To
delete all of contents,
select All.
Note: When the phone is in Silent mode (see page
31), you cannot change the sound settings.
place a check mark
Mark soft key.
remove a check mark
Unmark soft key.
Delete soft key.
Ring Tone (Menu 5.1)
delete the marked
items
This menu allows you to select a ring melody.
You can choose between many different
melodies. If you have downloaded sounds from
the Internet or optional EasyGPRS programme,
you can use them in this menu.
When a confirming message displays, press the
Yes soft key to confirm.
Memory Status (Menu 4.6)
Ring Volume (Menu 5.2)
You can check the amount of the memory being
used and the memory remaining in the camera.
This menu allows you to adjust the ring volume
to one of five levels.
Each time you press the Next soft key, the
display shows the total, free and used space for
photos and videos.
Use the Up and Down keys or the Volume keys
on the left side of the phone to increase or
decrease the volume.
118
119
Sound Settings
Sound Settings
Alert Type (Menu 5.3)
Message Tone (Menu 5.5)
This menu allows you to specify how you are to
be informed of incoming calls.
This menu allows you to select how the phone
informs you that a new message has been
received.
The following options are available:
Light Only: the service light flashes; the phone
neither rings nor vibrates.
SMS Tone (Menu 5.5.1)
The following options are available for alerting
you to new SMS messages:
Melody: the phone rings using the selected ring
tone or Alarm Tone.
Off: the phone does not use an SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three
times and then starts ringing.
Single Beep: the phone beeps once.
SMS Tone x: the phone uses one of several
SMS tones.
Keypad Tone (Menu 5.4)
SMS-CB Tone (Menu 5.5.2)
This menu allows you to select the tone that the
phone sounds when you press a key.
The following options are available for alerting
you to new cell broadcast (CB) messages:
To turn the sound off, select Off.
Off: the phone does not use a CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tone x: the phone uses one of several
CB tones.
121
120
Sound Settings
Sound Settings
MMS Tone (Menu 5.5.3)
Alerts on Call (Menu 5.8)
The following options are available for alerting
you to new MMS messages:
This menu allows you to set whether or not the
phone informs you when you receive a new
message or when the alarm time expires during
a call.
Off: the phone does not use an MMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Off: The phone alerts you after ending a call.
On: The phone alerts you during a call.
Single Beep: the phone beeps once.
MMS Tone x: the phone uses one of several
MMS tones.
Extra Tones (Menu 5.9)
You can customise additional tones used for the
phone.
Folder Tone (Menu 5.6)
This menu allows you to select the tone that the
phone sounds when you open or close the folder.
To turn a
given tone
Press the
To turn the sound off, select Off.
on
On soft key.
A check mark displays in
front of the option.
off
Off soft key again. The
check mark no longer
displays.
Power On/Off (Menu 5.7)
This menu allows you to select the melody that
the phone sounds when it is switched on or off.
The following options are available:
To turn the sound off, select Off.
Error Tone: sets whether or not the phone
informs you when you make a mistake.
Minute Minder: sets whether or not the phone
beeps every minute during an outgoing call to
keep you informed of the length of your call.
Connect Tone: sets whether or not your phone
beeps when your call is connected to the
system.
123
122
Phone Settings
Phone Settings
Display Settings (Menu 6.2)
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed in the Phone Settings
menu.
In this menu, you can change various settings
for the display or backlight.
Wallpaper (Menu 6.2.1)
Infrared Activate (Menu 6.1)
This menu allows you to change the background
image or the colour of the text to be displayed in
Idle mode.
This feature allows you to send or receive data
through the infrared port. To use an infrared
connection, you must:
The following options are available:
Wallpaper List: you can select a background
image to be displayed on the idle screen.
• configure and activate an IrDA-compliant
infrared port on your PC.
• activate the infrared feature on the phone; the
To change the background image:
IrDA icon
display.
) appears on the top line of the
(
1. Scroll through the list by pressing the Up or
Down key.
• align the IrDA port on the phone with the IrDA
port on your computer.
You have various preset images available. You
can also select a blank background or any
images downloaded from the Internet and
optional EasyGPRS programme or received in
messages. Once you have set a photo as the
wallpaper, it displays as My Photo on this
list.
IrDA port
2. Press the Select soft key when the image you
IrDA port
want highlights.
3. When the image displays, press the Select
The connection is ready for data transmission.
soft key to display it on the idle screen.
If there is no communication between your
phone and the IrDA-compliant device within 30
seconds of activating the feature, it is
automatically deactivated.
Text Display: you can specify whether or not
the phone displays the time and date on the idle
screen.
Note: For optional performance, use an optional
data link cable. you can purchase one from
your local Samsung dealer.
Text Color: you can select the colour of the text
to be displayed on the idle screen.
125
124
Phone Settings
Phone Settings
Front LCD (Menu 6.2.2)
Graphic Logo (Menu 6.2.6)
This menu allows you to select a colour of the
default image to be displayed on the external
display.
This menu allows you to display your service
provider’s logo instead of its name.
Off: the service provider’s name displays in Idle
mode.
Menu Style (Menu 6.2.3)
On: the service provider’s logo stored in your
phone displays in Idle mode; if no logo has been
stored, the service provider’s name displays.
This menu allows you to select the menu display
style. You can choose either Bar Style or Page
Style.
Greeting Message (Menu 6.3)
Back Light (Menu 6.2.4)
This menu allows you to set a greeting to be
displayed briefly when the phone is switched on.
You can select the length of time the backlight is
on. The backlight turns on when you press a key
open the folder or receive a call or message and
remains on for the specified length of time.
To
Press the
clear the existing
message
C key and hold it down
until the message is
cleared.
Service Light (Menu 6.2.5)
enter a new
message
appropriate alphanumeric
keys.
This menu allows you to select whether or not
the service light is used. It also allows you to
select a colour in which it flashes.
change the text
input mode
right soft key.
Select one of the seven colour settings. When
the phone is ready for use, the service light
flashes in the chosen colour.
For further details about how to enter
characters, see page 46.
If you do not wish to use the service light, select
Off.
127
126
Phone Settings
Phone Settings
PIN Check (Menu 6.6.1)
Own Number (Menu 6.4)
When the PIN Check feature is enabled, you
must enter your PIN each time you switch the
phone on. Consequently, any person who does
not have your PIN cannot use your phone
without your approval.
This function is a memory aid, which you can
use to check your own phone numbers if you
need to do so.
You can:
• assign a name to each of your own phone
numbers registered on your SIM card.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
• edit the names and numbers.
The following options are available:
Any changes made here do not in any way affect
the actual subscriber numbers on your SIM card.
Disable: the phone connects directly to the
network when you switch it on.
Enable: you must enter the PIN each time the
phone is switched on.
Language (Menu 6.5)
You can select a display language. English,
Chinese S (Simplified Chinese), Chinese T
(Traditional Chinese), Malay are available.
Change PIN (Menu 6.6.2)
This feature allows you to change your current
PIN to a new one, provided that the PIN Check
feature is enabled. You must enter the current
PIN before you can specify a new one.
Security (Menu 6.6)
The Security feature enables you to restrict the
use of your phone by others and the types of
calls.
Once you have entered a new PIN, you are
asked to confirm it by entering it again.
Various codes and passwords are used to protect
the features of your phone. They are described
in the following sections. Also see pages 173-
176.
Phone Lock (Menu 6.6.3)
When the Phone Lock feature is enabled, the
phone is locked and you must enter a 4 to 8-
digit phone password each time the phone is
switched on.
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change Password menu (Menu 6.6.4).
129
128
Phone Settings
Phone Settings
Once the correct password has been entered,
you can use the phone until you switch it off.
Privacy (Menu 6.6.6)
Using this menu, you can lock your contents,
such as multimedia and e-mail messages,
photos, videos, voice memos, downloaded
images and sounds. Once you have locked
contents, you must enter the phone password to
access the associated menus.
The following options are available:
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you are required to enter the phone
password when you switch the phone on.
To
Press the
Change Password (Menu 6.6.4)
select an item to lock
Up or Down key. To
lock all of your
The Change Password feature allows you to
change your current phone password to a new
one. You must enter the current password before
you can specify a new one.
contents, select All.
place a check mark
remove a check mark
lock the marked items
Mark soft key.
Unmark soft key.
OK soft key.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
When the phone asks for the phone password,
enter the password and press the OK soft key.
SIM Lock (Menu 6.6.5)
Note: The password is preset to “00000000” at the
factory. To change this password, see page
130.
When the SIM Lock feature is enabled, your
phone only works with the current SIM. You
must enter the SIM lock code to use a different
SIM card.
FDN Mode (Menu 6.6.7)
Once you have entered the lock code, you are
asked to confirm it by entering it again.
FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your
outgoing calls to a limited set of phone numbers.
To unlock the SIM, you must enter the SIM lock
code.
The following options are available:
Disable: you can call any number.
Enable: you can only call phone numbers stored
in Phone Book. You must enter your PIN2.
131
130
Phone Settings
Phone Settings
Note: Not all SIM cards have a PIN2. If your SIM
Active Folder: when this option is checked, you
can simply slide the folder up to answer a call.
card does not, this menu does not display.
When it is unchecked, you must press a key to
answer a call, depending on the setting of the
Anykey Answer option. See below.
Change PIN2 (Menu 6.6.8)
The Change PIN2 feature allows you to change
your current PIN2 to a new one. You must enter
the current PIN2 before you can specify a new
one.
Anykey Answer: when this option is checked,
you can answer an incoming call by pressing any
key, except the
key and the Reject soft key.
To reject the call, press the
Reject soft key.
key or the
Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
When this option is unchecked, you can only
press the key or Accept soft key.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu dose not display.
Short Cut (Menu 6.8)
Extra Settings (Menu 6.7)
The Navigation keys can be used as shortcut
keys. In Idle mode, they allow you to access
specific menus directly.
You can turn the automatic redialling or
answering features on or off.
The Left and Right keys are fixed as a shortcut
to the Text Messages menu and the Voice
Memo menu. In this menu, you can change the
shortcuts assigned to the Up and Down keys.
To turn a
feature
Press the
on
Mark soft key.
A check mark displays in
front of the option.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key
by pressing the Up or Down key and press the
Select soft key.
off
Unmark soft key. The check
mark no longer displays.
2. Select the menu to be assigned to the key by
pressing the Up or Down key.
The following options are available:
Note: To deactivate a shortcut key, select the
None option.
Auto Redial: when this option is checked, the
phone makes up to ten attempts to redial a
phone number after an unsuccessful call.
3. Press the Select soft key to save the selection.
Note: The interval between two attempts varies.
133
132
Phone Settings
Organiser
Reset Settings (Menu 6.9)
The Organiser feature enables you to:
• set an alarm so that the phone rings at a
specific time, such as to remind you of an
appointment.
You can easily reset your phone to its default
settings. To reset your phone:
• view the calendar and organise your schedule.
• set the current time and date.
• define a list of things to do.
1. Select the Reset Settings menu.
2. Enter the 4-8 digit phone password and press
the OK soft key.
• record voice memos.
• use the phone as a calculator for basic
mathematical equations or currency exchange
operations.
Note: The password is preset to “00000000” at the
factory. To change this password, refer to
page 130.
Alarm (Menu 7.1)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and
ring the alarm even if the phone is switched
off.
The following options are available:
Once Alarm: the alarm rings only once and is
then deactivated.
Daily Alarm: the alarm rings every day at the
same time.
Morning Call: the alarm rings to wake you up
in the morning.
135
134
Organiser
Organiser
To set an alarm:
Calendar (Menu 7.2)
1. Choose the type of alarm to be set and press
With the Calendar feature, you can:
the Select soft key.
• consult the calendar to check your memos.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder.
2. Enter the time for the alarm to sound.
Note: Your phone is preset to use 12-hour
format. To change the format, see page
140.
Consulting the Calendar
If you want to use the alarm options, press
the Options soft key. The following options
are available:
When you select the Calendar menu (Menu
7.2), the calendar displays. The following
options are available when you press the
Options soft key:
• Remove Alarm: deactivates the current
alarm.
Search All: displays all of the memos, starting
with the oldest regardless of the day. To scroll
through the memos, press the Up or Down key.
• Alarm Tone: allows you to select the
Alarm Tone.
3. Press the OK soft key.
Delete All: allows you to delete all of the
memos. You are asked to confirm your action.
4. Select AM or PM and press the Select soft
Go to Date: allows you to go to a specific date.
key.
Exit: exits the Calendar feature and returns to
Idle mode.
5. If you select Morning Call in step 1, choose
the repeat option, Monday to Friday or
Monday to Saturday, and press the Select
soft key.
Writing a Memo
To stop the alarm when it rings, press one of the
volume keys or press the Exit soft key.
You can make up to 30 memos for one day. To
write or edit a memo on a specific date:
Remove Alarm: deactivates all alarm settings.
1. Select a date on the calendar, using the
Navigation keys.
Autopower: when this option is set to Enable,
the alarm rings at the specified time even if the
phone is switched off.
Note: To skip to the previous or next month,
press the Volume keys on the left side of
the phone.
If the menu is set to Disable and the phone is
switched off at the specified time, the alarm
does not ring.
137
136
Organiser
Organiser
2. Press the Select soft key.
Press the New soft key to add a new memo for
the day.
An empty memo screen displays allowing you
to enter your memo.
You can use the following options by pressing
the Options soft key:
3. Enter your memo and then press the OK soft
key.
Edit: allows you to change the memo text.
Note: For further details about how to enter
Alarm: allows you to set an alarm to ring at a
specified time to remind you of the memo. If
you set the alarm earlier, you can change or
delete it.
characters, see page 46.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen
Delete: allows you to delete the memo.
day, press the Yes soft key.
Copy to: allows you to copy the memo to
Otherwise, press the No soft key.
another date.
5. If you pressed the Yes soft key, set the time
Move to: allows you to change the date of the
memo.
for the alarm and press the OK soft key.
Note: Your phone is preset to use 12-hour
format. To change the format, see page
140.
Time & Date (Menu 7.3)
You can set the melody for the alarm by
pressing the Melody soft key.
This menu allows you to change the current time
and date displayed. You can also find out what
time it is in another part of the world.
6. Select AM or PM and press the Select soft
key.
The colour of the date on the calendar changes
to green to indicate that a memo exists for that
date.
The following options are available:
Set Time: allows you to enter the current time.
You can choose the time format in the Time
Format menu (Menu 7.3.4).
Viewing a Memo
Note: Before setting the time, you must specify
your time zone in the World Time menu
(Menu 7.3.3). See the following page.
When you select a day for which a memo
already exists on the calendar, the latest memo
for the day displays.
If more than one memo is stored, press the Up
or Down key to scroll to the previous or next
memo.
139
138
Organiser
Organiser
Set Date: allows you to enter the day, month
and year.
Calculator (Menu 7.4)
With this feature, you can use the phone as a
calculator. The calculator provides basic
arithmetic functions; addition, subtraction,
multiplication and division.
World Time: allows you to find out what time it
is in another part of the world, using the Left
and Right keys.
The screen shows the:
1. Enter the first number using the numeric
keys.
• city name.
• current time and date.
• time difference between the selected city and
your city if you have set the local time (see
below for further details).
Notes:
•
To delete mistakes or clear the display, press
the C key.
•
To include a decimal point or a bracket, press
the left soft key until the symbol you want
displays.
To select your time zone:
1. Select the city corresponding to your time
zone by pressing the Left or Right key one or
more times.
2. Press the right soft key until the required
arithmetic symbol appears: + (addition),
- (subtraction),
(division).
(multiplication), /
The local date and time display.
2. Press the Set soft key.
3. Enter the second number.
4. To view the result, press the
Time Format: allows you to change the time
format to 24 Hours or 12 Hours.
key.
Date Format: allows you to change the date
format.
5. Repeat steps 1 to 4 as many times as
required.
141
140
Organiser
Organiser
The following options are available:
To Do List (Menu 7.5)
Action
Procedure
This feature allows you to:
View the
details for a
specific task
➀ Highlight the task.
• enter a list of tasks to be done.
➁ Press the View soft key.
➂ Scroll through the tasks
using the Up and Down
keys, if necessary.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
Change the
➀ Highlight the task.
status of a
specific task
➁ Press the
key to mark
1. Press the New soft key.
the task as completed as of
the current time and date.
2. Enter the first task.
or
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Mark option.
➃ Select the appropriate status
(Done or Undo).
Note: For further details about how to enter
characters, see page 46.
3. Press the OK soft key.
4. Select a priority status of high, normal or low
using the Up and Down keys and press the
Select soft key.
Create a new
➀ Press the Options soft key.
➁ Select the New option.
➂ Enter the text, priority
5. Enter your deadline and press the OK soft
key.
and/or deadline for the task.
If you do not want to set a deadline, press
the Skip soft key.
Edit an existing
task
➀ Highlight the task.
➁ Press the Options soft key.
➂ Select the Edit option.
➃ Change the text, priority
and/or deadline for the task.
Editing the To Do List
When you select the To Do List menu (Menu
7.5), the current contents display with the
status mark, if the task has been done, and
Sort the existing ➀ Press the Options soft
tasks by priority
or status
key.
➁ Select the Sort option.
➂ Select the sort criterion
(High, Low, Done or
Undo).
priority;
Low.
for High,
for Normal and
for
143
142
Organiser
Organiser
Voice Memo (Menu 7.6)
Action
Procedure
You can record voice memos. After recording, you
can send a memo to other people using the
Multimedia Message Service.
Copy a task
➀ Highlight the task.
➁ Press the Options soft
key.
Note: you can quickly enter the Voice Memo menu
➂ Select the Copy option.
➃ Change the text, priority
and deadline for the task.
by pressing the Right key in Idle mode.
Record (Menu 7.6.1)
Copy a task to
the calendar
➀ Highlight the task.
➁ Press the Options soft
key.
➂ Select the Copy to
Calendar option.
➃ Change the text and
deadline for the task and
set the alarm.
This menu allows you to record a new memo.
When you select this menu, the display shows the
30-second timer.
Note: You can quickly enter this menu by pressing
and holding the Right soft key.
1. To start recording, press the Record soft key.
2. Record a memo by speaking into the
microphone.
Delete a task
➀ Highlight the task.
➁ Press the Options soft
key.
3. When you press the Stop soft key, if or the
recording time expires, the following options
display:
➂ Select the Delete option.
Delete all tasks
➀ Press the Options soft
key.
➁ Select the Delete All
• Replay: plays back your memo.
• Re-record: discards the memo and enables
you to record another one.
option.
➂ Confirm the deletion by
pressing the Yes soft
key.
• Save: allows you to save the memo.
• Quit: cancels your recording and exits the
Record menu.
Exit the
To Do list
➀ Press the Options soft
key.
➁ Select the Exit option.
4. To save the memo, choose Save from the
options and press the Select soft key.
5. Press the C key to clear the default name, if
necessary, and enter a name for the memo.
For further details about how to enter
characters, see page 46.
145
144
Organiser
Organiser
6. Press the OK soft key.
Delete All (Menu 7.6.3)
The memo is saved and then the display
shows the memo information.
In this menu, you can delete all of your voice
memos.
When the confirming message appears, press
the Yes soft key. To cancel the deletion, press
the No soft key.
7. Press the Options soft key to use the
following memo options:
• Send: allows you to send the memo to
other people by using the MMS feature.
Follow the procedure on page 96.
Memory Status (Menu 7.6.4)
• Rename: allows you to change the memo’s
name.
You can check the number of voice memos.
The display shows the number of memos you
recorded.
• Delete: deletes the memo.
8. To exit, press the C or
key.
Memo List (Menu 7.6.2)
Currency Exchange (Menu 7.7)
This menu shows your voice memo list. Scroll to
a memo and press the Options soft key. The
following options are available:
Using this menu, you can figure out currency
conversions.
Play: plays the memo.
1. Enter the current exchange rate of your
source currency and press the OK soft key.
Send: allows you to send the memo to other
people by using the MMS feature. See page 96
for further details about sending a message.
You can insert a decimal point by pressing the
key.
Rename: allows you to change the memo’s
name.
2. Enter the amount to convert and press the
OK soft key.
Properties: displays information about the
memo, such as the name, date when the memo
was made, recording duration and memory size.
The amount you entered and its equivalent
value display.
3. Press the Exit soft key to exit the currency
Delete: deletes the memo.
convertor.
147
146
Network Services
Network Services
To set your call diverting options:
These menu functions are network services.
Please contact your service provider to check
their availability and subscribe to them, if you
wish.
1. Select a call diverting option by pressing the
Up or Down key, and then press the Select
soft key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press
the Select soft key.
Call Diverting (Menu 8.1)
The current status displays. If the option has
already been set, the number to which the
calls are diverted displays.
This network service enables incoming calls to
be rerouted to a number that you specify.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
3. To
activate call
Press the
Activate soft key.
Go to step 4.
You can use the following options to divert voice
calls and/or data calls:
diverting
change the number Change soft key.
to be called
Divert Always: all calls are diverted.
Go to step 4.
Busy: calls are diverted when you are already
on another call.
deactivate call
diverting
Remove soft key.
No Reply: calls are diverted when you do not
answer the phone.
4. Enter the number to which the calls are to be
diverted and press the OK soft key.
Unreachable: calls are diverted when you are
not in an area covered by your service provider.
To enter an international code, press the 0
key until the + sign displays.
Cancel All: all call diverting options are
cancelled.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can deactivate all call diverting settings by
selecting the Cancel All option.
149
148
Network Services
Network Services
4. Enter your call barring password supplied by
your service provider.
Call Barring (Menu 8.2)
The call barring network service allows you to
restrict your calls.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can use the following options to restrict
voice calls and/or data calls:
To deactivate specific call barring settings:
1. Select the call barring option to be
deactivated.
All Outgoing: calls cannot be made.
International: international calls cannot be
made.
2. Select the type of call to which this option
applies.
International Except to Home: when abroad,
calls can be made only to numbers within the
current country and to your home country, which
is the country where your home network
provider is located.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be
received when you are using your phone outside
of your home service area.
You can also deactivate all call barring settings
by selecting the Cancel All option.
Change Barring Password: you can set and
change the call barring password obtained from
your service provider using this option. You must
enter the current password before you can
specify a new one.
Cancel All: all call barring settings are
deactivated; calls can be made and received
normally.
To set your call barring options:
Once you have entered a new password, you are
asked to confirm it by entering it again.
1. Select a call barring option by pressing the Up
or Down key, and then press the Select soft
key.
2. Select the type of calls, voice or data, by
pressing the Up or Down key, and then press
the Select soft key.
3. Press the Activate soft key to confirm your
settings.
151
150
Network Services
Network Services
Call Waiting (Menu 8.3)
Network Selection (Menu 8.4)
This network service informs you when someone
is trying to reach you during another call.
The Network Selection feature enables you to
automatically or manually select the network
used when roaming outside of your home area.
You can specify individual call waiting options for
voice calls and/or data calls.
Note: You can select a network other than your
home network only if there is a valid
roaming agreement between them.
To set your call waiting options:
1. Select the type of calls to which you want to
apply the call waiting option by pressing the
Up or Down key, and then press the Select
soft key.
To automatically or manually select the network
when roaming:
1. When Network Selection displays, press the
Select soft key.
The screen informs you whether call waiting
is activated or deactivated.
2. Press the Up or Down key until the
appropriate option highlights and then press
the OK soft key.
2. You can activate or deactivate the call waiting
feature as necessary by using the Activate or
Deactivate soft key respectively.
If you select Automatic, you are connected
to the first available network when roaming.
To return to the previous screen, press the
Exit soft key.
If you select Manual, the phone scans for the
available networks. Go to step 3.
You can also deactivate all call waiting settings
by selecting the Cancel All option.
3. Press the Up or Down key until the network
you want highlights and then press the OK
soft key.
You are connected to that network.
153
152
Network Services
Network Services
Index List: lets you list, add or delete CUG
Caller ID (Menu 8.5)
index numbers. The list of current CUG indexes
appears. Add a new CUG index as advised by
your service provider or delete a group.
You can prevent your phone number from being
displayed on the phone of the person being
called.
To
Press the
Note: Some networks do not allow the user to
scroll through
the existing
CUG indexes
Up or Down key.
change this setting.
The following options are available:
add a new CUG Options soft key, select the
Default: the default setting provided by the
network is used.
index
Add option and enter the
index.
Hide Number: your number does not display on
the other person’s phone.
delete a CUG
index
Options soft key and select
the Delete option.
Send Number: your number is sent each time
you make a call.
activate a CUG
index
Options soft key and select
the Activate option.
Closed User Group (CUG) (Menu 8.6)
Outside Access: lets you enable or disable calls
to numbers other than those in the Closed User
Group. This feature depends on the nature of
your CUG subscription. Please check with your
service provider.
This network service allows incoming and
outgoing calls to be restricted to a selected user
group. You can create up to ten user groups.
For details about how to create and use a closed
user group, contact your service provider.
Default Group: you may set a default CUG with
your service provider. If you have done so, you
can enable the Default Group option on your
phone. When making a call, you are given the
option of using your default CUG, instead of
selecting one from the list.
Example: A company lends SIM cards to its
employees and wants to restrict
outgoing calls to members of the same
team.
Deactivate: deactivates the CUG function. This
menu appears only when the default group is
enabled or a CUG index is selected.
Activating a Closed User Group
If you select the Closed User Group menu, you
can enter the CUG function. You can now access
the following options after pressing the Select
soft key:
155
154
Network Services
Funbox
Band Selection (Menu 8.7)
The Funbox menu contains several fun options.
For the phone to make and receive phone calls,
it must register with one of the available
networks. Your phone can handle any of the
following types of networks:
WAP Browser (Menu 9.1)
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to
access and navigate the Wireless Web using your
phone.
• Combined GSM 900/1800
• GSM 1900
The country where you purchased your phone
determines the default band that it uses. When
you travel abroad, you must remember to
change to an appropriate band.
Home (Menu 9.1.1)
Selecting this menu connects the phone to the
network and loads the homepage of the Wireless
Web service provider. You can also press the
key in Idle mode.
1. When Band Selection displays, press the
Select soft key.
2. Press the Up or Down key until the
appropriate option highlights and press the
OK soft key.
The contents of the WAP Browser startup
homepage depends on your Wireless Web
service provider. To scroll through the screen,
use the Up or Down keys.
3. When the display confirms the network band
you selected, press the Yes soft key.
Note: To access the startup homepage from any
other screen in the WAP browser, use the
Home option. For further details about the
WAP Browser menus, see page 159.
To cancel the selection, press the No soft key.
When you select a new band, your phone
displays a confirmation message and then
automatically searches for all of the available
networks. Your phone registers with a preferred
network within the band.
Exiting the WAP Browser
To exit the browser at any time, simply press the
key.
157
156
Funbox
Funbox
Navigating the WAP Browser
Selecting and Using Browser Menu Options
Various menu options are available when you are
using the WAP Browser to navigate the Wireless
Web.
To
Press the
scroll through
and select browser
items
Up or Down key until the
symbol
item, and then press the
Select soft key to confirm
the selection.
points to the
To access a menu option:
1. Press and hold the
A menu list displays.
key.
return to the
previous page
Back soft key or the C
key.
2. Highlight a menu by pressing the Up or Down
key.
return to the
startup homepage
key for more than 2
seconds and select the
Home option. For further
details about this option,
see page 159.
3. Select an option by pressing the Select soft
key.
4. If necessary, select a secondary option using
the Up and Down keys, and press the Select
soft key to confirm.
Note:
Note: The menus may vary, depending on your
You can download a content, such as java MIDlets,
sounds, or images, while navigation the WAP
browser. If the corresponding memory of your
phone is full, a warning message appears. Free up
the memory, and retry saving.
version of the WAP browser.
The following options are available:
Reload: reloads the current page.
Home: takes you back at any time to the home
page of the Wireless Web service provider.
You can listen to a sound before downloading it,
even if your phone is in Silent mode.
Go to URL: allows you to manually enter the
URL address of a Web page. After entering an
address, press the OK soft key to go there
directly.
Entering Text in the WAP Browser
Show URL: displays the URL address of the
Web page to which you are currently connected
to. It also enables you to set the current site as
the startup home page.
When you are prompted to enter text, the
current text input mode is indicated on the
screen. To change the text input mode, press
the
key one or more times.
For further details about the text input modes,
see page 47.
159
158
Funbox
To
Funbox
3. Enter a name for the favourite item and press
Press the
the Enter soft key.
set the current
page as your
startup home page
Option soft key and
select the Save to Home
option.
After saving favourite items, you can use the
following options by pressing the Select soft
key:
set a bookmark
for the current
page
Option soft key and
select the Save to
Bookmark option.
Go to URL: quickly takes you to the site.
Edit: allows you to edit the address and name.
Delete: delete the address.
cancel your setting
Back soft key.
Edit Home: allows you to change the startup
home page manually. Enter the URL and press
the OK soft key. For further details about
entering text, see page 46.
http:// (Menu 9.1.3)
This menu allows you to manually enter the URL
address of the Web site that you wish to access.
Clear Cache: deletes the information stored in
the cache, which stores the most recently
accessed Web pages.
For further details about how to enter
characters, see page 46.
Inbox: allows you to read messages received
from the web server.
Settings (Menu 9.1.4)
This menu allows you to set up five proxy
servers for the WAP browser. Contact your
service provider for details about your Settings
options.
Favorite (Menu 9.1.2)
This menu allows you to store the URL addresses
of up to ten of your favourite web sites. You can
access this menu directly by pressing and
For each server, the following options are
available:
holding the
key while using the WAP browser.
To store a URL address:
Profile Name: enter a name that you wish to
assign to the HTTP proxy server.
1. Select an empty location and press the Select
soft key.
Homepage URL: set the address of your
startup homepage. When the default homepage
displays, you can delete it using the C key and
enter your own choice.
2. Enter the address and press the Enter soft
key.
For further details about how to enter
characters, see page 46.
161
160
Network Services
Funbox
Security: select a data transmission mode.
Choose Secure to protect your data against
unauthorised access; otherwise, choose Non-
Secure.
Clear Cache (Menu 9.1.5)
You can clear the information stored in the
cache, the phone’s temporary memory which
stores the most recently accessed Web pages.
Bearer: select a bearer to be used for each type
of network address accessed; GPRS or Data.
The remaining options depend on the Bearer
setting.
Press the Yes soft key to confirm the deletion.
Otherwise, press the No soft key.
Push Message (Menu 9.1.6)
When the bearer is set to GPRS:
IP Address: enter the WAP gateway address
required to connect to the Internet.
In this menu, you can receive and access web
messages from the server.
User Name: enter the User ID required to
connect to the GPRS network.
The following options are available:
Inbox: allows you to read the messages
received from the web server.
Password: enter the password required to
connect to the GPRS network.
Receive: allows you to set whether or not your
phone receives web messages.
APN: enter the access point name used for the
address of the GPRS network gateway.
Delete All: allows you to delete all of the web
messages.
When the bearer is set to Data:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type;
Analogue or ISDN.
Note: The WAP browser settings may vary,
depending on the service provider. Contact
your service provider for further details.
163
162
Funbox
Funbox
Games & More (Menu 9.2)
3. Press the
key to confirm your selection.
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
While you are playing
a game, to
Press the
Volume keys.
C key.
adjust the sound
volume
Note: Java services may not be available,
stop the game
and return to
depending upon your service provider.
the startup screen
When you access the Games & More menu, the
list of the default games appears. Once you have
downloaded games, they are added to the list.
exit the game
key.
Launching a MIDlet
Viewing MIDlet Information
Note: The procedure explained below are for the
default games. For downloaded games, the
procedure may be different.
1. Scroll to the MIDlet you want and press the
Info soft key.
The display shows information about the
MIDlet, such as the file size, application
version and its vendor..
1. Scroll to the MIDlet you want on the Games
list and press the Launch soft key.
2. On the startup screen of the MIDlet, scroll to
an option using the Navigation keys.
2. To scroll to other MIDlet information, press
the Navigation keys.
The following options are available:
3. If you want to delete the MIDlet, press the
Delete soft key and then press the Yes soft
key to confirm the deletion.
• START GAME: starts a new game.
• CONTINUE: allows you to continue the last
game you played.
Note: When you select the default games from
the list, the Delete option is not
available, so that you cannot delete
them.
• HIGH SCORE: shows the high score table.
This option may not be available for some
games.
• HOW TO PLAY: shows how to play the
game and the key functions for the game.
4. To exit and return to the Games list, press the
Back soft key or the C key.
• OPTION: allows you to switch the game
sound on or off.
165
164
Funbox
Funbox
Entering Text
Sounds (Menu 9.3)
If you need to enter text while using a MIDlet
you can use, the following input modes are
available:
In this menu, you can view the list of sounds
downloaded from a web server and Samsung
Fun Club or received in multimedia messages.
You can set the downloaded sounds as the
current ring tone or send them to other phones.
Upper-case character mode (A): allows you
to enter upper-case English characters.
Lower-case character mode (a): allows you
to enter lower-case English characters.
By pressing the Options soft key, you can use
the following options:
Number mode (1): allows you to enter
numbers.
Rename: allows you to change the name of the
sound.
Symbol mode: allows you to enter symbols.
After highlighting a symbol by pressing the
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring
tone.
Navigation keys, press the
key to insert it.
T9 mode (T9): allows you to enter English
characters by pressing one key per letter. In this
mode, you can change the case by pressing the
0 key.
Images (Menu 9.4)
In this menu, you can view the list of photos
downloaded from a web server and Samsung
Fun Club or received in messages. You can set
the downloaded photos as the current
background image or send them to other
phones.
To change the text input mode, press the
until the appropriate indicator appears.
key
If you set a photo as your wallpaper, it displays
as My Photo on the list.
167
166
Funbox
Funbox
By pressing the Options soft key, you can use
the following options:
Memory Status (Menu 9.6)
You can check the amount of the memory being
used and the memory remaining for games,
sounds and images.
Rename: allows you to change the name of the
image.
Delete: deletes the image.
Games & More: the display shows the total,
used and free space and the number of games
you downloaded.
Set as Wallpaper: sets the image as your
wallpaper for the idle screen.
Sounds & Images: the display shows the total,
free and used space, including each space used
by sounds and images.
Delete All (Menu 9.5)
This menu allows you to delete all of the
downloaded items in the Games, Sounds and
Images folders. You can delete all of the items at
one time.
To
Press the
select a folder to
clear
Up or Down key. To
delete all of your items,
select All.
place a check mark
Mark soft key.
remove a check
mark
Unmark soft key.
delete the marked
items
Delete soft key.
When a confirming message displays, press the
Yes soft key to confirm.
169
168
Solving Problems
Solving Problems
“No service,” “Network failure” or
“Not done” displays
If you are experiencing problems with your
phone, perform the following simple checks,
before contacting a service professional. This
may save you the time and expense of an
unnecessary service call.
• The network connection was lost. You may be
in a weak signal area (in a tunnel or
surrounded by buildings). Move and try again.
• You are trying to access an option for which
you have not taken out a subscription with
your service provider. Contact the service
provider for further details.
When you switch your phone on, the
following messages may appear
Insert SIM Card
You have entered a number but it was
not dialed
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• Have you pressed the
key?
• The automatic locking function has been
enabled. You must enter the phone’s password
before you can use the phone.
• Are you accessing the right cellular network?
• You may have set an outgoing call barring
option.
Enter PIN
• You are using your phone for the first time.
You must enter the Personal Identification
Number supplied with the SIM card.
Your correspondent cannot reach you
• Is your phone switched on (the
key
pressed for more than one second)?
• The PIN Check feature is enabled. Every time
the phone is switched on, the PIN has to be
entered. To disable this feature, use the PIN
Check menu (Menu 6.6.1).
• Are you accessing the right cellular network?
• You may have set an incoming call barring
option.
Enter PUK
Your correspondent cannot hear you
speaking
• The PIN code was entered incorrectly three
times in succession and the phone is now
blocked. Enter the PUK supplied by your
service provider.
• Have you switched off the microphone?
• Are you holding the phone close enough to
your mouth? The microphone is located at the
bottom of the phone.
171
170
Solving Problems
Access Codes
The phone starts beeping and
“**Warning** Low Battery” flashes on
the display
There are several access codes that are used by
your phone and its SIM card. These codes help
you protect the phone against unauthorised use.
• Your battery is insufficiently charged. Recharge
the battery.
When requested for any of the codes explained
below, enter the appropriate code (displayed as
asterisks) and press the OK soft key. If you
make a mistake, press the C key one or more
times until the incorrect digit is cleared and then
continue entering the correct code.
The audio quality of the call is poor
• Check the signal strength indicator on the
display (
the signal strength from strong (
).
); the number of bars indicates
The access codes, except for the PUK and PUK2
codes can be changed using the Security menu
(Menu 6.6). See page 128 for further details.
) to weak
(
• Try moving the phone slightly or moving closer
to a window if you are in a building.
Important! Avoid using access codes
resembling emergency numbers,
such as 112, so that you do not
accidentally dial an emergency
number.
No number is dialled when you recall a
Phone Book entry
• Check that the number has been stored
correctly, by using the Phone Book Search
feature.
Phone Password
• Re-store the number, if necessary.
The Phone Lock feature uses the phone
password to protect your phone against
unauthorised use. The phone password is
supplied with the phone and is preset to
“00000000” at the factory.
If the above guidelines do not help you to
solve the problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
To
See
activate/deactivate the
Phone Lock feature
page 129.
(Menu 6.6.3).
Then contact your local dealer or Samsung
after-sales service.
change the phone
password
page 130.
(Menu 6.6.4).
172
173
Access Codes
Access Codes
PIN
PIN2
The Personal Identification Number or PIN (4 to
8 digits) protects your SIM card against
unauthorised use. It is usually supplied with the
SIM card.
If you enter an incorrect PIN three times in
succession, the code is disabled and cannot be
used until you re-enable it by entering the PUK
(see below).
The PIN2 (4 to 8 digits), supplied with some SIM
cards, is required to access specific functions,
such as setting the maximum cost of a call.
These functions are available if supported by
your SIM card.
If you enter an incorrect PIN2 three times in
succession, the code is disabled and you cannot
access the functions until you re-enable it by
entering the PUK2.
To
See
activate/deactivate
the PIN Check feature
page 129.
(Menu 6.6.1).
To change the PIN2, see page 132 (Menu
6.6.8).
change the PIN
page 129.
(Menu 6.6.2).
PUK2
The 8-digit PUK2 (PIN Unblocking Key 2),
supplied with some SIM cards, is required to
change a disabled PIN2. If you lose the code,
contact your service provider.
PUK
The 8-digit PUK (PIN Unblocking Key) is
required to change a disabled PIN. The PUK may
be supplied with the SIM card. If not, or you
have lost it, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
To re-enable your PIN:
2. Enter a new PIN2 of your choice and press
1. Enter the PUK and press the OK soft key.
the OK soft key.
2. Enter a new PIN of your choice and press the
3. When the Confirm PIN2 message displays,
enter the same code again and press the OK
soft key.
OK soft key.
3. When the Confirm New PIN message
displays, enter the same code again and press
the OK soft key.
If you enter an incorrect PUK2 ten times in
succession, you will not be able to access the
functions requiring the PIN2. Contact your
service provider for a new card.
If you enter an incorrect PUK ten times in
succession, the SIM card becomes invalid.
Contact your service provider for a new card.
175
174
Access Codes
Health and Safety
Information
Barring Password
A 4-digit barring password is required when you
use the Call Barring function. You can obtain the
password from your service provider when you
subscribe to this function.
Exposure to Radio-Frequency
Energy (SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio
waves.
You can change this password in the Call
Barring menu (Menu 8.2). See page 150 for
further details.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as
not to exceed the limits for exposure to radio-
frequency (RF) energy, as recommended by the
EU Council. These limits are part of
comprehensive guidelines and establish
permitted levels of RF energy for the general
population. The guidelines were developed by
independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all
persons, regardless of age and health.
The exposure standard for mobile phones
employs a unit of measurement known as SAR
(Specific Absorption Rate). The SAR limit
recommended by the EU Council is 2.0W/kg.*
The Highest SAR Value for this model phone was
0.981W/kg.
* The SAR limit for mobile phones used by the public is 2.0
watts/kilogram (W/kg) averaged over ten grams of body tissue. The
limit incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary depending on national
reporting requirements and the network band.
177
176
Health and Safety Information
Health and Safety Information
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in
use, disconnect it from the power source. Do
not leave the battery connected to a charger
for more than a week, since overcharging may
shorten its life.
SAR tests are conducted using standard
operating positions with the phone transmitting
at its highest certified power level in all tested
frequency bands. Although the SAR is
determined at the highest certified power level,
the actual SAR level of the phone while
operating can be well below the maximum value.
This is because the phone is designed to operate
at multiple power levels so as to use only the
power required to reach the network. In general,
the closer you are to a base station, the lower
the power output of the phone.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter
conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the
battery at room temperature. A phone with a
hot or cold battery may temporarily not work,
even when the battery is fully charged. Li-ion
batteries are particularly affected by
Precautions When Using Batteries
• Never use any charger or battery that is
damaged in any way.
temperatures below 0 °C (32 °F).
• Use the battery only for its intended purpose.
• Do not short-circuit the battery. Accidental
short- circuiting can occur when a metallic
object (coin, clip or pen) causes a direct
connection between the + and – terminals of
the battery (metal strips on the battery), for
example when you carry a spare battery in a
pocket or bag. Short-circuiting the terminals
may damage the battery or the object causing
the short-circuiting.
• If you use the phone near the network’s base
station, it uses less power; talk and standby
time are greatly affected by the signal strength
on the cellular network and the parameters set
by the network operator.
• Battery charging time depends on the
remaining battery charge, the type of battery
and the charger used. The battery can be
charged and discharged hundreds of times, but
it will gradually wear out. When the operation
time (talk time and standby time) is noticeably
shorter than normal, it is time to buy a new
battery.
• Dispose of used batteries in accordance with
local regulations. Always recycle. Do not
dispose of batteries in a fire.
• If left unused, a fully charged battery will
discharge itself over time.
179
178
Health and Safety Information
Health and Safety Information
Electronic Devices
Road Safety
Most modern electronic equipment is shielded
from radio frequency (RF) signals. However,
certain electronic equipment may not be shielded
against the RF signals from your wireless phone.
Consult the manufacturer to discuss alternatives.
Your wireless phone gives you the powerful
ability to communicate by voice, almost
anywhere, anytime. But an important
responsibility accompanies the benefits of
wireless phones, one that every user must
uphold.
Pacemakers
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you
are following the special regulations in a given
area or country.
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are
consistent with the independent research and
recommendations of Wireless Technology
Research.
Operating Environment
Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or
when it may cause interference or danger.
Persons with pacemakers:
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the
phone is switched on
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimise potential interference
As with other mobile radio transmitting
equipment, users are advised that for the
satisfactory operation of the equipment and for
the safety of personnel, it is recommended that
the equipment should only be used in the normal
operating position (held to your
If you have any reason to suspect that
interference is taking place, switch your phone off
immediately.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your
hearing aid manufacturer to discuss alternatives.
ear with the antenna pointing over your
shoulder).
181
180
Health and Safety Information
Health and Safety Information
Other Medical Devices
Potentially Explosive Environments
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from
external RF energy. Your physician may be able
to assist you in obtaining this information.
Switch your phone off in health care facilities
when any regulations posted in these areas
instruct you to do so. Hospitals or health care
facilities may be using equipment that could be
sensitive to external RF energy.
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all
signs and instructions. Sparks in such areas
could cause an explosion or fire resulting in
bodily injury or even death.
Users are advised to switch the phone off while
at a refuelling point (service station). Users are
reminded of the need to observe restrictions on
the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants
or where blasting operations are in progress.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in
motor vehicles. Check with the manufacturer or
its representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Areas with a potentially explosive atmosphere
are often but not always clearly marked. They
include the areas below decks on boats,
chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane
or butane), areas where the air contains
chemicals or particles, such as grain, dust or
metal powders, and any other area where you
would normally be advised to turn off your
vehicle engine.
Posted Facilities
Switch off your phone in any facility where
posted notices require you to do so.
183
182
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
This phone, like any wireless phone, operates
using radio signals, wireless and landline
networks as well as user-programmed functions,
which cannot guarantee connection in all
conditions. Therefore, you should never rely
solely on any wireless phone for essential
communications (medical emergencies, for
example).
• Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Remember, to make or receive any calls the
phone must be switched on and in a service area
with adequate signal strength. Emergency calls
may not be possible on all wireless phone
networks or when certain network services
and/or phone features are in use. Check with
local service providers.
• Do not store or carry flammable liquids, gases
or explosive materials in the same compartment
as the phone, its parts or accessories.
• For vehicles equipped with an air bag,
remember that an air bag inflates with great
force. Do not place objects, including both
installed or portable wireless equipment in the
area over the air bag or in the air bag
deployment area. If wireless equipment is
improperly installed and the air bag inflates,
serious injury could result.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your
present location (for example, 112 or any
other official emergency number). Emergency
numbers vary by location.
• Switch your phone off before boarding an
aircraft. The use of wireless phones in an
aircraft may be dangerous to the operation of
the aircraft, and is illegal.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency
call. Consult this document and your local
cellular service provider.
• Failure to observe these instructions may lead
to the suspension or denial of telephone
services to the offender, or legal action, or both.
When making an emergency call, remember to
give all the necessary information as accurately
as possible. Remember that your phone may be
the only means of communication at the scene
of an accident; do not cut off the call until given
permission to do so.
185
184
Health and Safety Information
Health and Safety Information
• Do not use harsh chemicals, cleaning solvents
or strong detergents to clean the phone. Wipe
it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care.
The suggestions below will help you fulfill any
warranty obligations and allow you to enjoy this
product for many years.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Keep the phone and all its parts and
accessories out of the reach of small children.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a
radiator. The phone may explode when
overheated.
• Keep the phone dry. Precipitation, humidity
and liquids contain minerals that corrode
electronic circuits.
• Use only the supplied or an approved
replacement antenna. Unauthorised antennas
or modified accessories may damage the
phone and violate regulations governing radio
devices.
• Do not use the phone with a wet hand. Doing
so may cause an electric shock to you or
damage to the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• If the phone, battery, charger or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there
will assist you, and if necessary, arrange for
service.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Do not store the phone in cold areas. When
the phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
187
186
Glossary
Glossary
EMS (Enhanced Message Service)
To help you understand the main technical terms
and abbreviations used in this booklet and to
take full advantage of the features of your
mobile phone, here are a few definitions:
An adaptation of the Short Message Service
(SMS) that allows users to send and receive ring
tones and the service provider’s logo, as well as
combinations of simple media to and from EMS-
compliant handsets. Because EMS is based on
SMS, it can use SMS centres the same way that
SMS does. EMS works on all Global System for
Mobile communications (GSM) networks. EMS
senders can use text, melodies, pictures,
Active Folder
Ability to answer a call simply by opening the
phone.
Call Barring
sounds, and animations to enhance the
expressive power of messages that are limited
by the display constraints of mobile devices.
Ability to restrict outgoing and incoming calls.
Call Diverting
GPRS (General Packet Radio Service)
Ability to reroute calls to another number.
New non-voice value-added service that allows
information to be sent and received across a
mobile telephone network. GPRS provides
continuous connection to the Internet for mobile
phone and computer users. It is based on the
Global System for Mobile Communication (GSM)
circuit-switched cellular phone connections and
the Short Message Service (SMS).
Call Holding
Ability to put one call on standby while
answering or making another call; you can then
switch between the two calls, as required.
Call Waiting
Informs you that you have an incoming call
when you are engaged on another call.
GSM (Global System for Mobile
Communication)
Caller Line Identification Services
(Caller ID)
International standard for cellular
communication, guaranteeing compatibility
between the various network operators. GSM
covers most European countries and many other
parts of the world.
Services allowing subscribers to view or block
the telephone numbers of callers.
189
188
Glossary
Java
Glossary
PIN (Personal Identification Number)
Programming language generating applications
that can run on all hardware platforms, whether
small, medium or large, without modification. It
has been promoted for and geared heavily to the
Web, both for public Web sites and Intranets.
When a Java program runs from a Web page, it
is called a Java applet. When it is run on a
mobile phone or pager, it is called a MIDlet.
Security code that protects the phone/SIM
against unauthorized use. The PIN is supplied by
the service provider with the SIM card. It may
be a four to eight-digit number and can be
changed, as required.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
MMS (Multimedia Message Service)
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For
phone users, MMS is similar to Short Message
Service (SMS)-it provides automatic, immediate
delivery of user-created content from phone to
phone. The message addressing used is
primarily phone numbers, thus the traffic goes
from phone to phone. MMS also provides support
for e-mail addressing, so that messages can also
be sent by e-mail. In addition to the text content
of SMS, MMS messages can contain still images,
voice or audio clips, and also video clips and
presentation information.
Proxy Server
A proxy server resides between a Web client,
such as a web browser, and a real Web server
and acts as an intermediary between them.
When some people browse a web site, their
browser is not actually connecting to the web
server. The request from their browser goes to a
proxy server, and the proxy server makes the
request to the web server.
A proxy server can improve performance for
groups of users because it caches the results of
all requests for a certain amount of time. If a
user requests a web page that it already loaded
for another user, it reloads the page instead of
forwarding the request to the Web server, which
can be a time-consuming operation.
Multi-party Calling
Ability to establish a conference call involving up
to five additional parties.
Phone Password
Roaming
Security code used to unlock the phone when
you have selected the option to lock it
automatically each time it switches on.
Use of your phone when you are outside your
home area (when traveling for example).
191
190
Glossary
Glossary
SDN (Service Dialling Numbers)
Tri Band
Telephone numbers supplied by your network
provider and giving access to special services,
such as voice mail, directory inquiries, customer
support and emergency services.
Ability to handle any of the following types of
network; GSM 900, GSM 1800, combined GSM
900/ 1800 and GSM 1900 MHz bands, for
greater call success and wider roaming.
Your phone automatically searches for the last
network used. If, for any reason, this network is
unavailable, your phone will attempt to register
with a different network.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small
slot on the back of the phone and is protected
by the battery.
Voice Mail
Computerized answering service that
automatically answers your calls when you are
not available, plays a greeting (optionally in your
own voice) and records a message.
SMS (Short Message Service)
Network service sending and receiving messages
to and from another subscriber without having to
speak to the correspondent. The message
created or received can be displayed, received,
edited or sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using.
• is indicated on the bottom line of the display
just above the corresponding key.
193
192
194
195
196
|