|
Introduction
Sony Ericsson V600 Vodafone
In this part of the user guide you find a table of contents which
offers a general outline of the guide. To find more specific
information about your phone’s functionality, please refer
to the index at the back of the user guide.
You will also find information about what is included in the
box when you unpack your phone.
1
This is the Internet version of the user's guide. © Print only for private use.
1.2
Legal information
Sony Ericsson
UMTS-GSM 900/1800/1900
First edition (April 2005)
This user guide is published by Sony Ericsson Mobile Communications AB, without any
warranty. Improvements and changes to this user guide necessitated by typographical
errors, inaccuracies of current information, or improvements to programs and/or equipment,
may be made by Sony Ericsson Mobile Communications AB at any time and without
notice. Such changes will, however, be incorporated into new editions of this user guide.
All rights reserved.
©Sony Ericsson Mobile Communications AB, 2005
Publication number: EN/LZT 108 7765 R1A
Please note:
Some of the services in this user guide are not supported by all networks. This also
applies to the GSM International Emergency Number 112.
Please contact your network operator or service provider if you are in doubt whether you
can use a particular service or not.
Please read the Guidelines for safe and efficient use and the Limited warranty chapters
before you use your mobile phone.
Your mobile phone has the capability to download, store and forward additional content,
e.g. ringtones. The use of such content may be restricted or prohibited by rights of third
3
This is the Internet version of the user's guide. © Print only for private use.
parties, including but not limited to restriction under applicable copyright laws. You, and
not Sony Ericsson, are entirely responsible for additional content that you download to
or forward from your mobile phone. Prior to your use of any additional content, please
verify that your intended use is properly licensed or is otherwise authorized.
Sony Ericsson does not guarantee the accuracy, integrity or quality of any additional
content or any other third party content. Under no circumstances will Sony Ericsson be
liable in any way for your improper use of additional content or other third party content.
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use
of such marks by Sony Ericsson is under license.
3GPP is a trademark of ETSI in France and other jurisdictions.
QuickShare™, MusicDJ™, PhotoDj™ and VideoDJ™ are trademarks or registered
trademarks of Sony Ericsson Mobile Communications AB.
Real is a trademark or a registered trademark of RealNetworks, Inc.
Microsoft, Windows and PowerPoint are either registered trademarks or trademarks
of Microsoft Corporation in the U.S and other countries.
Mac OS is a trademark of Apple Computer, Inc., registered in the U.S. and other
countries.
T9™ Text Input is a trademark or a registered trademark of Tegic Communications.
T9™ Text Input is licensed under one or more of the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945,928, and 6,011,554; Canadian Pat. No. 1,331,057,
United Kingdom Pat. No. 2238414B; Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383; Euro.Pat. No. 0 842 463(96927260.8) DE/DK,
FI, FR, IT, NL, PT, ES, SE, GB; and additional patents are pending worldwide.
4
This is the Internet version of the user's guide. © Print only for private use.
Java and all Java based trademarks and logos are trademarks or registered trademarks
of Sun Microsystems, Inc. in the U.S. and other countries.
End-user license agreement for Sun™ Java™ J2ME™.
1. Restrictions: Software is confidential copyrighted information of Sun and title to all
copies is retained by Sun and/or its licensors. Customer shall not modify, decompile,
disassemble, decrypt, extract, or otherwise reverse engineer Software. Software may
not be leased, assigned, or sublicensed, in whole or in part.
2. Export Regulations: Software, including technical data, is subject to U.S. export
control laws, including the U.S. Export Administration Act and its associated
regulations, and may be subject to export or import regulations in other countries.
Customer agrees to comply strictly with all such regulations and acknowledges that
it has the responsibility to obtain licenses to export, re-export, or import Software.
Software may not be downloaded, or otherwise exported or re-exported (i) into, or
to a national or resident of, Cuba, Iraq, Iran, North Korea, Libya, Sudan, Syria (as
such listing may be revised from time to time) or any country to which the U.S. has
embargoed goods; or (ii) to anyone on the U.S. Treasury Department's list of Specially
Designated Nations or the U.S. Commerce Department's Table of Denial Orders.
3. Restricted Rights: Use, duplication or disclosure by the United States government
is subject to the restrictions as set forth in the Rights in Technical Data and Computer
Software Clauses in DFARS 252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2)
as applicable.
Part of the software in this product is copyright © SyncML initiative Ltd. (1999-2002).
All rights reserved.
Contains Macromedia® Flash™ technology by Macromedia, Inc. Copyright ©
1995-2003 Macromedia, Inc. All rights reserved.
5
This is the Internet version of the user's guide. © Print only for private use.
Macromedia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks
or registered trademarks of Macromedia, Inc. in the United States and other countries.
Other product and company names mentioned herein may be the trademarks of their
respective owners.
Any rights not expressly granted herein are reserved.
6
This is the Internet version of the user's guide. © Print only for private use.
8
This is the Internet version of the user's guide. © Print only for private use.
9
This is the Internet version of the user's guide. © Print only for private use.
10
This is the Internet version of the user's guide. © Print only for private use.
What´s in the box
1.5
In the box you will find:
• a phone
• a standard battery
• a charger
• a USB cable
• a portable stereo handsfree headset
• a CD including PC software
• a Vodafone live! Quick start guide
• a user guide (you are reading it now)
12
This is the Internet version of the user's guide. © Print only for private use.
Basics
This chapter gives you the basics for getting started with
your phone. You’ll learn how to assemble and turn on your
phone, and then you can use the setup wizard to quickly
set up your phone.
You’ll learn how to use call functions such as making voice
or video call, how to use contacts and how to enter text.
There´s also a quick overview of the parts of your phone, the
main functions of the keys, and what´s available in the menus.
13
This is the Internet version of the user's guide. © Print only for private use.
Getting to know your phone
2.1
9
10
1
2
Phone overview
1
Infrared port
3
4
2
Ear speaker
11
3
USB port
4
Screen
5
Video call key
Selection keys
Back key
5
6
6,13
7
12
13
14
15
8
Photo light key
Power on/off button
Video call camera
Camera zoom, volume buttons
Vodafone live!
Navigation key
Clear key
9
7
10
11
12
14
15
16
17
18
19
20
16
17
8
Camera button
Silent key
18 19 20
Microphone
Stereo headset
Charger connector
14
This is the Internet version of the user's guide. © Print only for private use.
2.2
Menu overview
Display
Wallpaper
Themes
Start-up screen
Screen saver
Brightness
Sleep mode clock
Edit line names**
1. Entertainment
Games
VideoDJ™
PhotoDJ™
MusicDJ™
Record sound
6. My Items
Pictures
Videos
8. Contacts
Options:
Speed dial
Contacts
My business card
Groups
SIM contacts
Special numbers
Advanced
12. Settings
General
Profiles
Time & date
Language
Voice control
New events
Phone status
Shortcuts
Start-up menu
Locks
Setup wizard
Tips and tricks
Master reset
Sounds
Themes
Web pages
Games
Applications
Other
2. Vodafone live!*
3. Media Player
4. Camera
Calls
Divert calls
Switch to line 1/Switch to line 2**
Manage calls
Time & cost
New contact
7. Organiser & Tools
9. Online services**/
Alarms
Online services**
Applications
Alarm
Calendar
Tasks
5. Messaging
Create new
Inbox
Drafts
Outbox
Sent messages
Messenger
Call voicemail
Email
Saved messages
Templates
Media Album
Settings
10. Radio
11. Calls
Show or hide no.
Handsfree
Sounds & alerts
Ring volume
Ringtone
Silent mode
Increasing ring
Vibrating alert
Message alert
Key sound
Notes
Light
Connectivity
Bluetooth
Infrared port
Remote control
Timer
Stopwatch
Calculator
Code memo
Synchronization
Device mgmt.
Mobile networks
Data comm.
Internet settings
Streaming settings
Settings for Java™
Accessories
* Vodafone! live. Offline webpage with direct links to online services.
**This service is not available in all countries.
15
This is the Internet version of the user's guide. © Print only for private use.
Getting started
2.3
Assembling the phone
Before you can use your phone you need to:
• Insert the SIM card.
• Attach and charge the battery.
SIM card
When you register as a subscriber with Vodafone, you get a SIM (Subscriber Identity
Module) card. The SIM card contains a computer chip that keeps track of your phone
number, the services included in your subscription, and names and numbers in your
contacts, among other things.
Note:
If you have been using a SIM card in another phone, make sure that your information is
saved to the SIM card before you remove it from the other phone. For example, contacts
may have been saved in the phone memory.
SIM card and battery information
Always turn off the phone and detach the charger before you insert or remove a SIM card.
Note:
It may take up to 30 minutes before the battery icon appears when charging.
16
This is the Internet version of the user's guide. © Print only for private use.
To insert SIM card and battery
1. Remove the battery cover by sliding the two catches on the side of the phone and
lifting it away as shown in the picture.
2. Slide the SIM card into its holder. Make sure that the gold contacts of the SIM card
are facing down, and the cut off corner is correctly aligned.
3. Place the battery on the back of the phone with the label side up and the connectors
facing each other.
4. Place the battery cover as shown in the picture and slide the two catches back into
place.
To charge the battery
1. Connect the charger to the phone. The symbol on the charger plug must face
upwards.
2. It may take up to 30 minutes before the battery icon appears on the screen.
3. Wait approximately 4 hours or until the battery icon indicates that the battery is fully
charged. If you do not see the battery icon after this time, press a key to activate the
screen.
4. Remove the charger by tilting the plug upwards.
PIN (Personal Identification Number)
You may need a PIN (Personal Identification Number) to activate the services in your
phone. The PIN is associated with your SIM card, and not with the phone. Your PIN
is provided by Vodafone. When you enter your PIN, each digit appears as *, unless
your PIN starts with the same digits as an emergency number, for example 112.
This is so that you can see and call an emergency number without entering a PIN.
If you make a mistake while entering your PIN, delete the number by pressing
.
17
This is the Internet version of the user's guide. © Print only for private use.
Note:
If you enter the wrong PIN three times in a row, the SIM card is blocked and
the message PIN blocked appears. To unblock it, you need to enter your PUK
Available Services
Some services and functions described in this user guide are network or subscription
dependent. Because of this, all menus may not be available in your phone. Please
consult Vodafone Customer Care for more information about your subscription.
Turning on the phone and making calls
Make sure that the phone is charged and your SIM card is inserted before you turn it on.
When you have turned the phone on, you can use the setup wizard to quickly and easily
prepare your phone for use.
To turn on the phone
Setup wizard
1. Press and hold
.
2. Enter your SIM card PIN, if requested.
You can use the setup wizard
to help you get started with the
basic settings in your phone.
The wizard also gives you tips
on how to use the keypad.
3. At first start-up, select the language you want for your phone menus.
4. }Yes if you want the setup wizard to help you get started, and follow the instructions
that appear. You can start the wizard from the menu system at any time, } Settings
} the General tab } Setup wizard.
To make and receive calls
You can start the wizard from
the menu system at any time.
} Settings } the
Enter the phone number (with international prefix and area code if applicable) } Call
to make the call, or press and hold
to make a video call. } End call to end the
call. When the phone rings } Answer.
General tab } Setup wizard.
18
This is the Internet version of the user's guide. © Print only for private use.
2.4
Keys and navigation
Standby screen and main menu and status bar
What is the standby screen?
From standby, press
Some submenus include tabs. Scroll to a tab using the navigation key and select
an option.
to enter the main menu, where the menus are shown as icons.
The standby screen is
displayed when you are not
calling or using the menus.
This is where you can see,
for example, the name of
your operator, the time and the
date. At the top of the standby
screen you find the status bar.
The status bar at the top of the screen contains icons, which give information related
Keys and buttons
Press to enter the main menu from standby.
Press to select highlighted items.
During a call, press to view a list of options.
Move through menus and tabs.
Press to select the options shown immediately above
these keys on the screen.
Press to go back one level in the menus.
Press and hold to return to standby or end a function.
19
This is the Internet version of the user's guide. © Print only for private use.
Press to delete items, such as pictures, sounds and
contacts.
During a call, press and hold to mute the microphone.
What is the desktop?
Press and hold to make a video call or to enter video
call mode.
The desktop is where all the main
menu icons are. From standby
you reach the desktop by
pressing . At the top of the
desktop you find the status bar.
Press to take a picture or to record a video clip.
Press and hold to call your voicemail service (if set).
-
-
Press and hold any of these keys to reach a contact
beginning with a specific letter.
Press any of these keys and press Call to speed dial.
In standby, press to view status information.
To reject a call, quickly press twice when receiving
a call.
More options
Press once to turn off the ringtone when receiving
a call.
During a call, press to increase the volume.
When using the media player (also when minimized),
press to increase the volume. Press and hold to go back
one track.
When using the camera, press to zoom in.
Press and hold to voice dial, alternatively say your magic
word (if set), %44 Voice dialling.
When in the menus, } More
to enter a list of options.
There are different alternatives
in the list of options depending
on where you are in the menus.
20
This is the Internet version of the user's guide. © Print only for private use.
In standby, press to view status information.
To reject a call, quickly press twice when receiving
a call.
Press once to turn off the ringtone when receiving
a call.
During a call, press to decrease the volume.
When using the media player (also when minimized),
press to decrease the volume. Press and hold to go
forward one track.
When using the camera, press to zoom out.
When using the camera, press to turn on the
photo light.
Press and hold to set the phone to silent. Press
once to turn off the ringtone when receiving a call.
Phone language
Getting back to your language
Most SIM cards automatically set the language used in the menu to the language of
the country where you bought your SIM card. If this is not the case, the predefined
language is English.
You can always choose language
according to SIM by pressing
8888
in standby.
To change the phone language
You can always choose English
by pressing
standby
0000
in
1. } Settings } the General tab } Language } Phone language.
2. Select a language.
21
This is the Internet version of the user's guide. © Print only for private use.
Shortcuts
A quicker way to move through the menus is to use shortcuts. You can use desktop
shortcuts to quickly go to a menu, and you can use predefined standby shortcuts
to quickly reach certain functions.
Using desktop shortcuts
Enter the menus by pressing
want to go. For example, to reach the fifth menu item, press
eleventh and twelfth menu items, press and
and then enter the number of the menu to which you
. To reach the tenth,
respectively. To go
,
back to standby, press and hold
.
Using standby shortcuts
You can use the predefined shortcuts and use the navigation keys to go directly to that
function in standby.
Getting help
More information, explanations
or tips about selected features,
menus or functions available
in your phone.
Predefined standby shortcuts
In your Vodafone live! phone, the following shortcuts are predefined in standby:
• Press
• Press
• Press
• Press
to use Create new message.
to use Calendar.
to go to Activity menu.
to use Contacts.
Scroll to a menu item } Info.
To edit a standby shortcut
} Settings } the General tab } Shortcuts and select which shortcut you want to edit
} Edit. Press
if you want to delete the shortcut.
22
This is the Internet version of the user's guide. © Print only for private use.
2.5
Calling
Making calls
Before you can make or receive any calls, you must turn on the phone and be within
range of a network. %18 Turning on the phone and making calls. To make a video call,
Networks
When you turn on the phone, it automatically selects your home network if this is within
range. If it is not within range, you may use another network, provided Vodafone has an
agreement that allows you to do so. This is called roaming.
You can select the network you want to use, or you can add a network to your list
of preferred networks. You can also change the order in which networks are selected
during an automatic search. For all such options } Settings } the Connectivity tab
} Mobile networks. Use
or
to scroll between the tabs.
To make a call
1. Enter the phone number (with international country code and area code if applicable).
More ways of making calls
2. } Call to make a voice call, or press and hold
to view options.
3. } End call to end the call.
to make a video call. } More
You can call numbers from the
also use your voice to make calls,
To change the ear speaker volume
Press
or
to increase or decrease the ear speaker volume during a call.
To use the loudspeaker during a voice call
1. } More } Turn on speaker to turn on the loudspeaker.
2. } More } Turn off speaker to turn off the loudspeaker.
23
This is the Internet version of the user's guide. © Print only for private use.
Note:
Do not hold the phone to your ear while using the loudspeaker. This could damage
your hearing.
To turn off the microphone
1. Press and hold
.
2. To resume the conversation, press and hold
again.
Receiving calls
When you receive a call, the phone rings and the caller’s number is displayed
(if your subscription includes the Calling Line Identification service and the caller’s
number is identified).
If the number is in your contacts, the name, number, and picture (if assigned) are
displayed. If the number is a restricted number, Withheld is displayed.
Voice control
To answer a call
You can use your voice
to answer or reject calls,
} Answer.
To reject a call
} Busy or quickly press a volume button twice.
Missed calls
If you have missed a call, and if New events is set to Activity menu, the missed call
appears in the Activity menu. } Call to call the missed number.
If New events is set to Pop-up, Missed calls: appears, indicating the number
of missed calls. To view the missed calls in the call list } Yes. If you want to view
the missed calls later } No.
24
This is the Internet version of the user's guide. © Print only for private use.
To check your missed calls
1. From standby } Calls } the Missed tab. Use
or
to scroll between the tabs.
2. Use
or
to scroll to a number and } Call to call a number.
Automatic redialling
To re-dial a number
If the connection of the call failed and Retry? is displayed } Yes.
Note:
Do not hold the phone to your ear while waiting. When the call is connected, the phone
gives a loud signal.
The phone redials the number up to ten times or until:
• The call is connected
• You press Cancel
• You receive a call
Automatic redialling is not available for data calls.
Making international calls
When you make an international call, the + sign replaces the international prefix number
of the country from which you are calling. You can make a call from abroad, using another
network, provided Vodafone has an agreement with that network.
To make international calls
1. Press and hold
until a + sign appears on the screen.
2. Enter the country code, area code (without the leading zero) and phone number
} Call.
25
This is the Internet version of the user's guide. © Print only for private use.
Emergency calls
Your phone supports the international emergency numbers, for example, 112 and 911.
This means that these numbers can normally be used to make an emergency call
in any country, with or without a SIM card inserted, if a 3G (UMTS) or GSM network
is within range.
Note:
In some countries, other emergency numbers may also be promoted. Vodafone may
therefore have saved additional local emergency numbers on the SIM card.
To make an emergency call
Enter, for example, 112 (the international emergency number) } Call.
To view your local emergency numbers
} Contacts } Options } Special numbers } Emergency nos.
26
This is the Internet version of the user's guide. © Print only for private use.
2.6
Video call
With video call, you can see the person you are talking to on your screen.
Before you start
To make a video call, both you and the person you are calling need a subscription that
supports the 3G (UMTS) service, and you need to be within range of a 3G (UMTS)
network. 3G (UMTS) service is available when the 3G icon appears in the status bar.
Video call demo mode
You can use the video call functions without making a call, if you, for example, want to
prepare a view and check how it looks before calling. Press and hold
call functions are available in the demo mode.
. Most video
To make a video call
1. Press and hold
when 3G (UMTS) service is available.
3G network icon
2. Enter the phone number and press Call. To retrieve a phone number from your
contacts } Call... } Contacts and scroll to the phone number you want to call
When the 3G network icon is
displayed in the status bar at
the top of the screen, you are
able to make and receive video
calls to and from other 3G
telephones.
} Call or press and hold
.
3. Press Camera or open the lens cover to switch cameras from the front camera
to the back camera. Hold the phone horizontally, so that the person you are talking
to will see the image at a correct angle.
To adjust the brightness of the outgoing video
Press
to decrease the brightness, or
to increase the brightness of the outgoing
video picture.
To zoom the outgoing video in or out
Press
to zoom in the outgoing video and press
to zoom out.
27
This is the Internet version of the user's guide. © Print only for private use.
To accept an incoming video call
Press Answer.
Video calls
To end a video call
You can also make video calls
from standby or from other
applications, such as contacts
or messages.
During an ongoing video call, press End call.
Video call options
Press
when using the front camera to view, and select from the following options:
• Stop camera/Start camera – turn off and on the outgoing video camera.
An alternative picture is showed when the camera is off.
• Turn off speaker/Turn on speaker – turn off and on the incoming sound during
a video call.
In standby, Calls, highlight
a number and press and hold
.
In contacts, highlight a number
• Mute microphone/Unmute mic. – turn off and on the microphone during a video
call (this option is available during calls).
and press and hold
In a message, highlight a
.
• Switch pictures – choose between showing the incoming or the outgoing video
in full size display.
number in the message and
press and hold
.
• Hide small pic./Show small pic. – choose if you want to hide or show the small
picture.
• Night mode – use when the lighting conditions are poor. This setting affects the
outgoing video.
• Advanced – to view, and select, the following options:
• Alternative pic. – this picture will be shown to the other party when you have
turned off the camera.
• Answer mode – choose whether the front camera should be on or off when you
answer a video call. If you answer with the front camera turned off, you can easily
turn it on by pressing Camera.
28
This is the Internet version of the user's guide. © Print only for private use.
• Camera quality – select what picture quality to use for the outgoing video.
This setting will take effect at the next call – not during an ongoing call.
• Mirror image – you will see a mirror image of the outgoing video. If you turn
mirror image on, you will see yourself as you would in a mirror. The other party
will see the picture non-mirrored.
• Contacts – select a contact to view during an ongoing call – useful, for example,
when you want to check a number or an email address for a contact (this option
is visible during calls).
• Transfer sound – transfer the sound to and from handsfree equipment using
Bluetooth.
• Demo clip – turn demo clip on or off.
29
This is the Internet version of the user's guide. © Print only for private use.
Entering letters
2.7
There are two ways of entering letters, for example, when writing a message or writing
a name in contacts:
• Multitap text input
You press each key as many times as needed to show the letter you want.
• T9™ Text Input
The T9 Text Input method uses a built-in dictionary to recognize the most commonly
used word for each sequence of key presses. This way, you press each key only once,
even if the letter you want is not the first letter on the key.
Writing languages
Before you start entering letters, you need to select the languages that you want to use
when writing.
Switching writing language
To select writing language
When writing, you can switch to
one of your selected languages
1. } Settings } the General tab } Language } Writing language.
2. Scroll to each language that you want to use and mark it. } Save to exit the menu.
by pressing and holding
.
To enter letters using multitap text input
1. To enter text, you have to be in a function where text input is possible, for example
} Messaging } Create new } SMS.
2. Press the appropriate key,
–
,
or
, repeatedly until the
character you want appears on the screen. You can see which characters you
can choose in the box in the top right corner of the screen.
30
This is the Internet version of the user's guide. © Print only for private use.
Example:
• To enter an ‘A’, press
• To enter a ‘B’, quickly press
• To shift between capital and lower-case letters, press
• You can use the volume buttons as a shortcut to certain letters. To enter a ‘B’,
once.
twice.
, then enter the letter.
press and hold the
and hold the
volume button and press
volume button and press
. To enter a ‘C’, press
.
To enter letters using T9™ Text Input
1. To enter text, you have to be in a function where text input is possible, for example
} Messaging } Create new } Text message.
2. For example, if you want to write the word “Jane”, press
.
,
,
,
3. If the word shown is the one you want, press
to accept and add a space. To
accept a word without adding a space, press . If the word shown is not the one
you want, press
by pressing
or
to view alternative words. Accept a word and add a space
.
4. Continue writing your message. To enter a full stop or other punctuation marks,
press and then or repeatedly. Accept by pressing
.
To add words to the T9 Text Input dictionary
1. While entering letters } More } Spell word.
2. Edit the word by using multitap input. Navigate between the letters with
and
.
To delete a character, press . To delete the entire word, press and hold
.
3. When you have edited the word } Insert. The word is added to the T9 Text Input
dictionary. Next time you enter this word using T9 Text Input, it will appear as one
of the alternative words.
31
This is the Internet version of the user's guide. © Print only for private use.
To select another writing method
Before, or while entering letters, press and hold
to select another writing method.
Options list
Before, or while entering letters, } More to view a list of options. The list may contain
some or all of the following:
• Add symbol – symbols and punctuation marks such as ? and , are shown. Move
between the symbols by using
,
,
and
.
• Add item – pictures, melodies, sounds, templates and animations.
• Spell word – for T9 Text Input only. Edit the suggested word by using multitap text
input.
• Writing language – a list of available languages is shown.
• Writing method – a list of methods available for the current language is shown.
• Dictionary (T9) – turn T9 Text Input dictionary on or off.
• Word suggestions – select to view, or not, word suggestions when writing a word.
• My words – manage the words that you have added to the dictionary.
• National chars. – turn off language-specific characters to save space. This option
appears only for some writing languages.
32
This is the Internet version of the user's guide. © Print only for private use.
2.8
My items
Use the My Items to handle files saved in the phone memory. Items such as Pictures,
Videos, Sounds, Themes, Games, Applications, and Web pages are saved as files
in folders. All files that the phone cannot recognize are saved in the Other folder. You
can create your own subfolders in some predefined folders, to which you can move your
Using items
To move a file to a folder
If you highlight a file in the
Pictures or Sounds folder
} More } Use as, you can
use the file for several purposes.
1. } My Items and open a folder.
2. Scroll to a file, for example, a picture that you want to move } More
} Manage files } Move to folder.
3. Select the folder you want to move the file to, or select New folder and name
the folder } OK.
You can, for example, set
a sound as a ringtone, set
a picture as screen saver,
or add a picture to a contact.
To create a subfolder
1. } My Items and open a folder.
2. } More } New folder and enter a name for the folder.
3. } OK to save the folder.
To select several files
1. } My Items and select a file } More } Mark } Mark several.
2. Scroll and select more files by pressing Mark or Unmark.
33
This is the Internet version of the user's guide. © Print only for private use.
To select all files in a folder
} My Items and select a file } More } Mark press Mark all or Unmark all
to remove the selection.
To move or copy files to a computer
File information
Items that are downloaded, or received using one of the available transfer methods,
may be copyright-protected. If a file is protected, you may not be able to copy or send
that file. You can select to view information for the file.
34
This is the Internet version of the user's guide. © Print only for private use.
2.9
Contacts
You can save your contact information in the phone memory as contacts, or on
the SIM card as names and numbers. You can choose which contacts information
– Phone contacts or SIM contacts – is shown as default.
Contacts options
Default contact
For useful information
and settings } Contacts
} Options.
If you select to use Phone contacts as default, your contacts will show all information
saved in Contacts. If you select SIM contacts as default, the contacts will only show
names and numbers saved on the SIM card.
To select default contacts
1. } Contacts } Options } Advanced } Default contacts.
2. Select Phone contacts or SIM contacts.
Contacts
Contacts is like an address book, in which you can store names, phone numbers and
email addresses. You can also add pictures, ringtones and personal information, such
as birthday, email, Web and street addresses, to the contacts.
When you add information to a contact, the information is organized under five tabs.
To add a phone contact
1. } Contacts } New contact } Add.
2. Enter the name directly or press Add and enter the name } OK.
3. Enter the number directly or press Add and enter the number } OK.
4. Select a number type.
35
This is the Internet version of the user's guide. © Print only for private use.
5. Scroll between the tabs using
and . Select fields to enter more information.
To enter symbols, for example, @ in an email address } Symbols and select
a symbol } Insert.
6. When you have entered the information } Save.
SIM contacts
On your SIM card, you can save entries as a name with a single number. The number
of entries you can save depends on the amount of memory available on the SIM card,
see Contacts } Options } Advanced } Memory status.
Note:
Contact Vodafone for more information.
To add a SIM contact
If SIM contacts are default contacts, follow the same steps as for adding a phone
contact. You can add only name and number to SIM contacts.
Always save on the SIM card
You can set the phone to save entries automatically to the SIM card. With this setting,
names and phone numbers that you add to or edit in your phone contacts in the phone
memory are also saved on the SIM card. The number of phone numbers that can be
saved depends on the type of SIM card.
To automatically save names and phone numbers to the SIM card
1. } Contacts } Options } Advanced } Auto save on SIM.
2. Select On.
Checking the memory
With the memory status function, you can check how many positions you have left
in the phone memory and SIM memory.
36
This is the Internet version of the user's guide. © Print only for private use.
If the memory is full, you must delete contacts to be able to add new contacts,
%38 To delete a contact.
Adding numbers
To check the memory
} Contacts } Options } Advanced } Memory status.
You can update your contacts
with numbers that you have
dialled and with numbers from
calls that you have received or
missed.
Pictures and personal ringtones
You can add a picture and a personal ringtone to a phone contact. When that person
calls, the picture is displayed (provided your subscription supports the Calling Line
Identification service) and the ringtone is played.
To add a picture or a ringtone to a phone contact
1. } Calls from standby and
select a tab in the call list.
1. } Contacts and select the contact you want to add a picture or ringtone to } More
} Edit contact.
2. Scroll to the number you
want to add to contacts } More
} Save number.
2. Use
,
,
and
to scroll to the relevant tab. } Picture: or Ringtone } Add.
3. Select a picture or sound. } Save to save the contact.
Calling contacts
You can call one of the numbers saved for one of your contacts, or a number on your
SIM card.
3. Add the number to a new
contact or to an existing
contact.
If phone contacts are set as default, you can choose to call from contacts or from the
SIM card.
If SIM contacts are set as default, you can only call the numbers on the SIM card.
To call a phone contact
1. } Contacts. Scroll to, or enter the first letter or letters of the contact you want
to call.
2. When the contact is highlighted, press
To make a video call, press and hold
or
to select a number } Call.
when the contact is highlighted.
37
This is the Internet version of the user's guide. © Print only for private use.
To call a SIM contact
1. } Contacts. If SIM contacts are set as default, select the name and number
you want to call from the list } Call.
2. If phone contacts are set as default } Contacts } Options } SIM contacts
and select the name and number you want to call from the list } Call.
Ask to save
When you end a call or receive a message, the phone can prompt you to add a phone
number or email address to your contacts.
To activate ask to save
} Contacts } Options } Advanced } Ask to save } On.
Updating contacts
You can easily update and edit any information in your contacts.
To edit a phone contact
1. } Contacts and select a contact } More } Edit contact.
2. Use
,
,
and
to scroll to the relevant tab and edit the information
you want to edit } Save.
To edit a SIM contact
1. If SIM contacts are set as default } Contacts and select the name and number
you want to edit. If phone contacts are set as default } Contacts } Options
} SIM contacts. Select the name and number you want to edit.
2. } More } Edit and edit the name and number.
To delete a contact
} Contacts and scroll to the contact you want to delete, press
.
38
This is the Internet version of the user's guide. © Print only for private use.
To delete all contacts
1. } Contacts } Options } Advanced } Delete all contacts.
2. } Yes and enter the phone lock code } OK. The default phone lock code is 0000.
Names and numbers that are saved on the SIM card are not deleted.
Default items for phone contacts
A default item is displayed in the first position for a phone contact, and is therefore
quicker to access. You can set the default item – a phone number, email address
or a Web address – to be displayed first for each contact. If you do not set your own
default item, the mobile phone number is the default item.
To set the default item for a contact
1. } Contacts and scroll to a contact } More } Default number.
2. Select the phone number, email address or Web address that you want
as default item.
Sending contacts
You can send contacts using one of the available transfer methods.
To send a contact
} Contacts and select a contact } More } Send contact and select a transfer
method.
To send all contacts
} Contacts } Options } Advanced } Send all contacts and select a transfer
method.
39
This is the Internet version of the user's guide. © Print only for private use.
Synchronizing contacts
You can back up and synchronize your contacts with the Vodafone live! network.
1. } Contacts } Options } Sync. contacts.
2. If you have more than one account, select which account to use } Select.
Note:
Visit www.vodafone.com for details. This service is not available for all countries.
Copying contacts
You can copy names and numbers to and from your phone contacts and the SIM card.
Choose if you want to copy all numbers, or a single number.
Note:
When you select to copy all contacts from the phone to the SIM card, all existing
information on the SIM card will be replaced.
To copy names and numbers to the SIM card
1. } Contacts } Options } Advanced } Copy to SIM.
2. Select Copy all or Copy a number.
To copy names and numbers to phone contacts
1. } Contacts } Options } Advanced } Copy from SIM.
2. Select Copy all or Copy a number.
40
This is the Internet version of the user's guide. © Print only for private use.
2.10
Call list
The numbers of the most recent calls are saved in the call list. Dialled, answered and
missed calls are listed under separate tabs.
To call a number from the call list
1. } Calls from standby and select a tab.
2. Use
,
,
and
to scroll to the name or number you want to call } Call,
or press and hold
to make a video call.
To add a number from the call list to contacts
1. } Calls from standby and select a tab.
2. Scroll to the number you want to add } More } Save number.
3. } New contact to create a new contact, or select an existing contact to add the
number to.
To clear the call list
} Calls } the All tab } More } Delete all.
41
This is the Internet version of the user's guide. © Print only for private use.
Speed dialling
2.11
You can save the phone numbers that you want to reach easily in positions 1-9
in your phone.
To speed dial
From standby, enter the position number and } Call.
To set or replace speed dialling numbers
1. } Contacts } Options } Speed dial.
2. Scroll to the position in the list } Add or } Replace.
3. Select an existing contact to add the position number to.
42
This is the Internet version of the user's guide. © Print only for private use.
2.12
Voicemail
If your subscription includes an answering service, callers can leave a voicemail
message when you cannot answer a call.
Calling your voicemail service
You can easily call your voicemail service by pressing and holding
. If you have not
set your voicemail number, you will be asked if you want to enter the number. } Yes to
enter the number. You get the number from your network operator.
To enter your voicemail number
} Messaging } Settings } Voicemail number.
43
This is the Internet version of the user's guide. © Print only for private use.
Voice control
2.13
With your phone, you can use your voice to:
• Voice dial – call someone by saying the name.
• Activate voice control by saying a “magic word”.
• Answer and reject calls when using a handsfree kit.
Voice commands can only be saved in the internal phone memory, not on the SIM card.
When recording, make sure that you are in a quiet environment and try to use names
Voice dialling
You can voice dial by saying a pre-recorded voice command. Start voice dialling from
standby using the phone, a portable handsfree, a Bluetooth headset or by saying your
magic word.
You must first activate the voice dialling function and record your voice commands.
An icon appears next to a phone number that has a voice command.
To activate voice dialling and record names
1. } Settings } the General tab } Voice control }Voice dialling } Activate
} Yes } New voice } Add and select a contact.
2. If the contact has more than one number, use
and
to view the numbers.
Select the phone number to which you want to add the voice command. Now
you are going to record a voice command such as “John mobile” for the phone
number you selected.
44
This is the Internet version of the user's guide. © Print only for private use.
3. Instructions appear. Wait for the tone and say the command that you want to record.
The voice command is played back to you.
4. If the recording sounds ok } Yes. If not } No and repeat step 3.
5. To record another voice command for a contact } New voice } Add again and
repeat steps 2-4 above.
To make a call from the phone
1. From standby, press and hold one of the volume buttons.
2. Wait for the tone and say the name you recorded earlier, for example “John mobile”.
The name is played back to you and the call is connected.
To make a call with a handsfree
From standby, press the handsfree button, or the Bluetooth headset button.
Caller name
You can choose whether you want to hear the recorded contact name when you receive
a call from that contact.
To turn the caller name on or off
} Settings } the General tab } Voice control } Play caller name.
The magic word
You can record a magic word and use it as a voice command to allow totally handsfree
access to voice dialling. Instead of pressing and holding a volume button to voice dial,
you say the magic word and then one of your recorded voice commands. The magic
word is especially suitable when using a car handsfree kit.
Note:
Choose a long, unusual word or phrase that can easily be distinguished from ordinary
background speech.
45
This is the Internet version of the user's guide. © Print only for private use.
To activate and record the magic word
2. Instructions appear. } Continue. Wait for the tone and say the magic word.
3. Instructions appear. } Continue and select the environments in which you want
your magic word to be activated. You can select several alternatives.
Voice answering
You can answer or reject incoming calls by using your voice, when using a portable
or car handsfree kit.
Note:
You can only use a MIDI, WAV, EMY or IMY file as a ringtone with voice answering.
To activate voice answering and record voice answer commands
1. } Settings } the General tab } Voice control } Voice answer } Activate.
Instructions appear. } Continue. Wait for the tone and say “Answer”, or another
word. If the recording sounds ok } Yes. If not } No and repeat step 2.
2. Say “Busy”, or another word } Yes.
3. Instructions appear. } Continue and select the environments in which you want
voice answering to be activated. You can select several alternatives.
To answer a call using voice commands
When the phone rings, say “Answer” and the call is connected.
To reject a call using voice commands
When the phone rings, say “Busy”. The call is rejected. The caller is diverted
to voicemail, if activated, or hears a busy tone.
46
This is the Internet version of the user's guide. © Print only for private use.
Editing your voice commands
You can edit all your voice commands saved in Contacts. Select the contact you want
to edit a voice command for } More } Edit contact. Scroll to the relevant tab and edit
your voice command.
To re-record a voice command
1. } Settings } the General tab } Voice control } Voice dialling } Edit names.
2. Select a voice command } More } Replace voice.
3. Wait for the tone and say the command.
Tips when recording and using voice commands
If your phone cannot detect your voice command, one of the following might have
happened:
• You spoke too softly – try speaking louder.
• You held the phone too far away – hold it as you do during a call.
• The voice command was too short – it should be around one second long and more
than one syllable.
• You spoke too late or too soon – speak immediately after the tone.
• You did not record the voice command when the handsfree was attached – for voice
control with a handsfree kit, record when the handsfree is attached.
• You used another intonation – use the same intonation as in the recorded voice
command.
47
This is the Internet version of the user's guide. © Print only for private use.
Diverting calls
2.14
If you cannot answer incoming calls, you can divert them to another number,
for example, your answering service.
Note:
When the Restrict calls function is activated, some Divert calls options are not available.
You can choose between the following divert options:
• Divert always – divert all calls.
• When busy – divert calls if you are already on the phone.
• Not reachable – divert calls if your phone is turned off or if you are unreachable.
• No reply – divert calls that you do not answer within a specified time limit.
To activate a call divert
1. } Settings } the Calls tab } Divert calls. Use
or
to scroll between the
tabs.
2. Select a call type and then one of the divert options } Activate.
3. Enter the phone number to which you want your calls to be diverted, or press
Look up to find the contact } OK.
To deactivate a call divert
Scroll to the divert option } Deactivate.
To check all divert options
} Settings } the Calls tab } Divert calls } Check all. Use
or
to scroll
between the tabs.
48
This is the Internet version of the user's guide. © Print only for private use.
2.15
More than one call
You can handle more than one call simultaneously.
Call waiting service
When the service is activated, you hear a beep if you receive a second call.
To activate or deactivate the call waiting service
} Settings } the Calls tab } Manage calls } Call waiting. Use
or
to scroll
between the tabs.
To make a second call
1. } More } Hold call to put the ongoing call on hold.
2. Enter the number you want to call } More } Call.
Receiving a second voice call
When you receive a second call, you can do the following:
• } Answer and put the ongoing call on hold.
• } Busy to reject the second call and continue the ongoing call.
• } Replace active call to answer the second call and end the ongoing call.
Ongoing video call
Handling two voice calls
When you have one ongoing call and one call on hold, you can do the following:.
When you have an ongoing
video call and receive a second
call you have to end the video
call to be able to answer the
second call.
• } Switch calls to switch between the two calls.
• } More } Join calls to join the two calls into a conference call.
• } More } Transfer call, to connect the two calls. You are disconnected from
both calls.
• } End call to end the ongoing call, then press Yes to retrieve the held call.
49
This is the Internet version of the user's guide. © Print only for private use.
• } End call } No to end both calls.
• You cannot answer a third call without ending one of the first two calls or joining
them into a conference call.
Conference calls
In a conference call, you can have a joint conversation with up to five other people.
You can also put a conference call on hold and make another call.
Note:
There may be additional charges for calls involving multiple parties, contact Vodafone
Customer Care for more information.
To join the two calls into a conference call
} More } Join calls.
To add a new participant
1. } More } Hold call to put the joined calls on hold.
2. } More } Add call and call the next person you want to include in the
conference call.
3. } More } Join calls.
4. Repeat steps 1-3 to include more participants.
To release a participant
} More } Release part and select the participant that you want to release
from the conference call.
To have a private conversation
1. } More } Talk to and select the participant that you want to talk to.
2. } More } Join calls to resume the conference call.
50
This is the Internet version of the user's guide. © Print only for private use.
2.16
More call features
My numbers
View, add and edit your own phone numbers.
To check your phone numbers
} Contacts } Options } Special numbers } My numbers and select one
of the options.
Notepad
You can use the phone to make a note of a phone number during a call. When you
press the number keys, the person you are talking to hears tone signals. When you
end the call, the number remains on the screen. } Call to call the number. } More
} Save number and select a contact to save the number. If you want to create a new
contact and save the number } New contact.
Groups
You can create a group of numbers and email addresses. By doing so, you can send
You can also use groups (with numbers) when you create accepted callers lists,
To create a group of numbers and email addresses
1. } Contacts } Options } Groups } New group } Add.
2. Enter a name for the group } Continue.
3. } New } Add to find and select a contact number.
4. Repeat step 3 to add more numbers. } Done.
51
This is the Internet version of the user's guide. © Print only for private use.
Business cards
You can add your own business card as a contact.
To add your own business card
} Contacts } Options } My business card and add information for your business
card } Save.
To send your business card
} Contacts } Options } My business card } Send my card and select a transfer
method.
Showing or hiding your number
If your subscription supports the Calling Line Identification Restriction (CLIR) service,
you can hide your phone number when making a call.
To always show or hide your phone number
1. } Settings } the Calls tab } Show or hide no.. Use
or
to scroll between
the tabs.
2. Select Show number, Hide number or Network default.
Accept calls
With the accept calls service, you can choose to receive calls only from certain phone
numbers. Other calls are automatically rejected by a busy tone. If the call divert option
When busy is activated, calls are diverted instead of rejected by a busy tone. The
phone numbers of calls you have rejected are saved in the call list.
52
This is the Internet version of the user's guide. © Print only for private use.
To add numbers to the accepted callers list
1. } Settings } the Calls tab } Manage calls } Accept calls } Only from list
} Edit } Add. Select a contact. Use
or
to scroll between the tabs.
2. To add a group of contacts to the accepted callers list } Groups (requires that you
To accept all calls
} Settings } the Calls tab } Manage calls } Accept calls } All callers. Use
or
to scroll between the tabs.
Restricted dialling
You can use the restrict calls service to restrict outgoing and incoming calls. You need
a password which you get from your service provider.
Note:
If you divert incoming calls, you cannot activate some Restrict calls options.
The following calls can be restricted:
• All outgoing – All outgoing calls.
• Outgoing intl – All outgoing international calls.
• Outgoing intl roam. – All outgoing international calls except to your home country.
• All incoming – All incoming calls.
• Inc. when roaming – All incoming calls when you are abroad (when roaming).
To activate or deactivate a call restriction
1. } Settings } the Calls tab } Manage calls } Restrict calls and select an option.
Use
or
to scroll between the tabs.
2. Select Activate or Deactivate, enter your password } OK.
53
This is the Internet version of the user's guide. © Print only for private use.
Fixed dialling
The fixed dialling function allows calls to be made only to certain numbers saved on the
SIM card. The fixed numbers are protected by your PIN2.
Note:
You can still call the international emergency number, 112, even when the fixed dialling
function is activated.
Partial numbers can be saved. For example, saving 0123456 allows calls to be made
to all numbers starting with 0123456.
Note:
When fixed dialling is activated, you cannot view or manage any phone numbers that
are saved on the SIM card.
To activate or deactivate fixed dialling
1. } Contacts } Options } Special numbers } Fixed dialling and select Activate
or Deactivate.
2. Enter your PIN2 } OK and then } OK again to confirm.
To save a fixed number
} Contacts } Options } Special numbers } Fixed dialling } Fixed numbers
} New number and enter the information.
Two voice lines
If you have a subscription that supports an alternate line service, your phone may have
two voice lines with different phone numbers.
54
This is the Internet version of the user's guide. © Print only for private use.
To select a line for outgoing calls
} Settings } the Calls tab and select line 1 or 2. Use
or
to scroll between
the tabs.
To change the name of a line
} Settings } the Display tab } Edit line names and select one of the lines to edit
the name. Use or to scroll between the tabs.
Call time and cost
During a call, the duration of the call is shown on the screen. You can check the
duration of your last call, outgoing calls and the total time.
To check the call time
} Settings } the Calls tab } Time & cost } Call timers. Use
or
to scroll
between the tabs.
Tone signals
You can use telephone banking services or control an answering machine by sending
tone signals during a call.
• To send the tones, press the keys
• To clear the screen after the call is finished, press
-
,
or
.
.
• To turn the tones off during a call, } More } Disable tones.
55
This is the Internet version of the user's guide. © Print only for private use.
Activity menu
You can open the activity menu from standby to view and handle new events,
and access bookmarks and shortcuts.
To open the Activity menu
Press
.
Activity menu tabs
• New events – this shows new events such as missed calls and messages.
When a new event occurs, the tab appears on the screen. Press
or delete an event from the event tab.
to dismiss
• My shortcuts – this shows your shortcuts and applications that are running
in the background. You can add, delete and change the order of shortcuts.
When you select a shortcut and the application opens, other programs are
closed or minimized.
• Bookmarks – this shows your own Internet bookmarks. When you select a
bookmark and the browser opens, other programs are closed or minimized.
To select a view for new events
If you want new events to appear as pop-up text instead of in the activity menu,
} Settings } the General tab } New events } Pop-up.
56
This is the Internet version of the user's guide. © Print only for private use.
Messaging
This chapter gives information about the types of messages
supported in your phone as well as a complete Messaging
glossary.
You will find instructions on how to send, read and manage
text messages (SMS), picture messages (MMS) and email.
You will also learn about Messenger – the instant messaging
function that allows you to join chat sessions and see which
of your contacts that are online.
Details about Area Information (traffic reports etc.) and Cell
Information (important information from your network operator)
exist. Please contact your service provider for more information
about these services.
57
This is the Internet version of the user's guide. © Print only for private use.
Text messaging (SMS)
3.1
Text messages can contain simple pictures, animations, melodies and sound effects.
Note:
If you send a text message to a group, you are charged for each member of that group.
Before you start
First make sure that the number of your service centre is set. The number is supplied
by your service provider and is usually saved on the SIM card.
To set the service centre number
1. } Messaging } Settings } SMS } Service centre. If the service centre number
is saved on the SIM card, it is shown in the list.
2. If there is no number in the list } Add and enter the number, including the
international “+” sign and country code } Save.
Sending text messages
Note:
Some language-specific characters use more space. For some languages you
To write and send a text message
1. } Messaging } Create new } SMS.
2. Write your message } Continue. If you want to save the message for later,
press
. } Yes to save it in Drafts.
58
This is the Internet version of the user's guide. © Print only for private use.
3. } Enter phone no. and enter the recipient’s phone number, or } Contacts look-up
to retrieve a number or a group from Contacts. To enter an email address } Enter
Email addr. A list below the send options shows the last used recipients. You can
also select a recipient from this list. } Send.
Note:
To send a message to an email address, you need to set an email gateway number,
} Messaging } Settings } SMS } Email gateway. The number is supplied by
Vodafone.
To insert an item in a text message
1. While writing your message } More } Add item.
2. Select an item type and then select an item.
Receiving text messages
When you receive a text message, it appears in the Activity menu if New events
is set to Activity menu. } View to read the message.
If New events is set to Pop-up, you are asked if you want to read the text message.
} Yes to read the text message or } No if you want to read the message later.
When you have read the text message } More to view a list of options. Press
to close the text message.
To call a number in a text message
Delete a message
Select the phone number } Call.
You can select a message from
the list of messages and press
to delete the entire
Saving and deleting text messages
Text messages are saved in the phone memory. When the phone memory is full, you
must delete messages or move them to the SIM card to be able to receive new messages.
Messages that you have saved on the SIM card remain there until you delete them.
message.
59
This is the Internet version of the user's guide. © Print only for private use.
To save a message to the SIM card
} Messaging } Inbox } More } Save message } Saved messages.
To save an item from a text message
1. Select the phone number, Web address, picture or sound that you want to save
in the message } More.
2. If you have selected to save a phone number } Use } Save number. If you have
selected a Web address } Save bookmark, a picture } Save picture, a melody
} Save sound.
To save or delete several messages
1. } Messaging and select a folder.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark or Unmark.
4. } More } Save messages or } More } Delete messages.
To delete a message
1. } Messaging and select a folder.
2. Select the message that you want to delete and press
.
Long messages
Long messages.
The number of characters that a text message can contain depends on the language
you are writing in. You can send a longer message by linking two or more messages.
You are charged for each of the messages linked in a long message. You may not
receive all parts of a long message at the same time.
Check with Vodafone Customer
Care for the maximum number
of messages that can be linked.
Note:
Check with Vodafone for the maximum number of messages that can be linked.
60
This is the Internet version of the user's guide. © Print only for private use.
To turn long messages on
} Messaging } Settings } SMS } Max. msg length } Max. available.
Templates
If you have messages that you send often, you can save these as templates.
You can create your own templates.
To create a template
1. } Messaging } Templates } New template } Add } Text.
2. Write the message } OK.
3. Enter a title for the message } OK.
Message options
You can set a default value for several message options or choose the settings each
time you send a message. To check the delivery status of a sent message, the delivery
report option must be on.
To set a default text message option
} Messaging } Settings } SMS and select an option.
To set a message option for a specific message
1. When you have selected a recipient to send your text message to } More
} Advanced.
2. Select the option that you want to change } Edit and select a new setting.
3. } Done when you have changed the options.
To check the delivery status of a sent message
} Messaging } Sent messages and select a text message } View } More
} Details.
61
This is the Internet version of the user's guide. © Print only for private use.
Picture messages (MMS)
3.2
Picture messages can contain text, pictures, video clips, camera pictures, sound
recordings, and business cards. Both you and the receiver of the picture message must
have a subscription that supports MMS. You can send picture messages to a mobile
Before you start
Before sending a picture message, make sure that:
1. The address of your message server is set } Messaging } Settings } MMS
} Message server.
2. You have entered the correct settings } Messaging } Settings } MMS
} Internet profile. If no Internet profile exists } New profile and enter the
required settings.
Settings may already be entered when you buy your phone. If not, you can automatically
Creating and sending picture messages
When composing a picture message, you can select different items such as: Picture,
Text, Sound, Video, Sound recording and Page. You can also select Use camera
to take a new picture or record a new video clip.
Sending your business card
Before sending a picture message, you can select from different options to adjust and
enhance your message.
You can send your business
card as an attachment in a
picture message.
62
This is the Internet version of the user's guide. © Print only for private use.
To create and send a picture message
1. } Messaging } Create new } MMS } Add to view a list of items to add to your
message. Select an item.
2. } Add to add more items to the message. You can view and select options to
enhance the message by highlighting items in the message and pressing the
left selection key.
3. When you have finished composing your message } More } Send to.
4. } Enter phone no. and enter the recipient’s phone number, or } Contacts look-up
to retrieve a number or a group from Contacts. To enter an email address } Enter
Email addr.. A list below shows the last 10 recipients. You can also select a
recipient from this list. } Send.
View the size of the message
To make a call while creating a picture message
1. While writing your message } More.
2. } Make a call and enter or retrieve a phone number } Call. You return to the
message.
The size of the message
is displayed in the top right
corner of the screen.
3. To end the call } More } End call.
Default message options
You can request a read report, a delivery report and set a priority for a specific message.
To set a default message option
} Messaging } Settings } MMS and select one of the options.
Additional send options
You can edit the message subject and add or edit recipients and attachments.
To select additional send options
When you have entered the recipient’s phone number } More and select one
of the options.
63
This is the Internet version of the user's guide. © Print only for private use.
Receiving picture messages
When you receive an automatically downloaded picture message, the picture message
appears in the Activity menu if New events is set to Activity menu. } View to read
the message.
If New events is set to Pop-up, you are asked if you want to read the picture
message. } Yes to read or play the message. } Stop to stop the message.
When you have read the message, select } Reply to reply immediately or select
Saving several messages
} More to view a list of options. Press
to close the message.
Note:
When you want to save several
messages at a time you can use
Mark several. See the
You can select a message from the list of messages and press
entire message.
to delete the
To save items from a picture message
When you have viewed a picture message } More } Save items and select an item
from the list that appears.
Delete picture messages
Picture messages are saved in the phone memory. When the phone memory is full,
Templates
You can base your message on one of the templates. You can also add new templates.
To use a template for a picture message
1. } Messaging } Templates and select a template.
2. } Use } Add to add new items.
3. } More } Send to to send the message.
64
This is the Internet version of the user's guide. © Print only for private use.
Automatic download
You can select how you want your picture messages to be downloaded.
Downloading messages
} Messaging } Settings } MMS } Auto download to view the following:
You can always download
previously not downloaded
messages in the Inbox by
highlighting the message
} View.
• Always – your phone automatically downloads messages to your phone as soon
as they come to your network operator’s server. This is default.
• Ask in roaming – you will be asked if you want to download messages when you
are in a network other than your home network.
• Not in roaming – the messages are never downloaded when you are in a network
other than your home network.
• Always ask – you will always be asked if you want to download messages,
regardless of network used.
• Off – new messages appear in the inbox as icons. Select the message } View
to download.
65
This is the Internet version of the user's guide. © Print only for private use.
Voice messages
3.3
Voice messages offer a quick way to send and receive sound recordings as messages.
A voice message can only contain one sound recording. Both you and the receiver of
the voice message must have a subscription that supports MMS.
To record and send a voice message
1. } Messaging } Create new } Voice message. The sound recorder starts.
2. Record your message. } Stop to end the recording.
3. } Send to send the message.
4. } Enter phone no. and enter the phone number of the recipient, or } Contacts
look-up to retrieve a number or a group from Contacts. To enter an email address
} Enter Email addr.. A list below the send options shows the last 10 recipients. You
can also select a recipient from this list. } Send.
Receiving voice messages
When you receive a voice message, the voice message appears in the Activity menu
if New events is set to Activity menu. } Play to listen to the message.
If New events is set to Pop-up, you are asked if you want to listen to the voice
message. } Yes to listen to the voice message or } No if you want to listen to the
message later.
When you have listened to the voice message } More to view a list of options. Press
to close the message.
66
This is the Internet version of the user's guide. © Print only for private use.
3.4
Postcard
More ways of sending
postcards
As part of Vodafone live! you can have a message with picture and text delivered
as a postcard to a street address.
To send a postcard
Another way of sending
a postcard is to use contacts
by selecting a contact,
More } Send message
} Live! Postcard.
1. } Messaging } Create new } Live! Postcard.
2. Select Picture to add a picture to your postcard, or Use camera if you want
to take a picture to include in the postcard.
3. Write message to accompany the picture } OK.
4. } Send to } Address to enter name and address, or you can either select
Contacts look-up to retrieve a contact, or select a recipient from the list of previous
recipients.
You can also create a
postcard by selecting
My Items } Pictures.
Select a picture } More
} Send } Live! Postcard
5. When you have entered name and address } OK } Send. The picture and message
will be printed on a postcard and sent to the address that you select.
To view a sent postcard
} Messaging } Sent messages and highlight the message } View.
Note:
This service is not available in all countries.
67
This is the Internet version of the user's guide. © Print only for private use.
Email
3.5
You can use your phone to send and receive email messages. Please note that you
need a subscription that supports data transmission. For more information, contact
Vodafone Customer Service.
Before you start
First make sure that:
• You have set up and selected an email account. The necessary settings for Vodafone
mail have been preconfigured in your phone. However, you must configure your
personal Vodafone Mail user name and password. If you are not a Vodafone Mail
Customer Services.
Default email account
If you have both an office and a home email account, you can set one of them as default:
} Messaging } Email } Settings } Account settings and select an account.
To write and send an email message
1. } Messaging } Email } Create new.
2. Write the subject for your message } Continue and then write the text } Continue.
3. } Enter Email addr. to enter an email address or } Contacts look-up to retrieve
an address from Contacts.
4. Select } Send to send your email message or select } More to view a list of options
for your message.
68
This is the Internet version of the user's guide. © Print only for private use.
To send, receive and read email messages
1. } Messaging } Email } Inbox } Send&rec (when inbox is empty) or
} Messaging } Email } Inbox } More } Send & receive to send
or download new messages.
2. Select a message } View to read it.
To reply to an email message
1. Open the email message } Reply.
2. } Include message to include the original message in your reply or } Create new
to exclude the original message. Write your message } Continue.
3. } Enter Email addr. to enter an email address or } Contacts look-up to retrieve
an address from Contacts.
4. Select } Send.
To save an email address or a phone number in an email message
1. Select the email address or phone number that you want to save } More.
2. To save an email address } Save address. To save a phone number } Use
} Save number.
To save an email message
1. Open the email message } More } Save message } Saved Email.
2. The message is saved in Saved Email in the Email menu.
Note:
The number of email messages that can be saved depends on how much memory there is
left in the phone. From standby, press
or
to view status information. All email
messages are also saved on your email server, and you can view both older and newer
messages on the server.
69
This is the Internet version of the user's guide. © Print only for private use.
To save several email messages
1. } Messaging } Email } Inbox.
2. Select a message } More } Mark several.
3. Scroll and select more messages by pressing Mark or Unmark.
4. } More } Save messages.
To delete an email message (POP3 users)
1. } Messaging } Email } Inbox and select the message } More.
2. } Mark for deletion. The message is deleted the next time you connect to your
email server. If you want to delete several messages } Mark several. Scroll and
select more messages by pressing Mark or Unmark. } More } Mark for deletion.
To delete an email message (IMAP4 users)
1. } Messaging } Email } Inbox and select the message } More.
2. } Mark for deletion. The message is marked for deletion on the server. If you want
to delete several messages } Mark several. Scroll and select more messages by
pressing Mark or Unmark. } More } Mark for deletion.
3. } More } Clear inbox. and select With send & rec. or No send & rec. to delete
messages.
70
This is the Internet version of the user's guide. © Print only for private use.
3.6
Vodafone Messenger
Messenger
Connect and log in to the Messenger server to communicate online with your favourite
contacts. If your subscription supports it, you can see contact status if they are online,
and send and receive instant messages.
Note:
Visit www.vodafone.com for details. This service (menu option) is not available
in all countries.
To log in to your Messenger server
} Messaging } Messenger } Myself } Log in.
List of contacts
You can create a list of contacts from your Messenger server, people you want to send
messages to on a regular basis.
To add a contact
} Messaging } Messenger } More } Add contact and select an option.
To send an instant message from Messenger
1. } Messaging } Messenger and select a contact.
2. } Send IM and type your message } Send.
71
This is the Internet version of the user's guide. © Print only for private use.
Status
You can change your status shown to others. You can also choose to display it for your
contacts only or for all users on the Messenger server.
To change your own status
} Messaging } Messenger }Myself } Change.
Chatroom
A chatroom can be started by your service provider, by an individual Messenger user or
by yourself. You can save chatrooms either by saving a chat invitation or by searching
for a specific chatroom.
To start a chatroom
1. } Messaging } Messenger } More } Start chatroom.
2. Select contacts to invite to the chatroom from your list of contacts } Continue.
3. Enter a short invitation text } Continue } Send.
72
This is the Internet version of the user's guide. © Print only for private use.
3.7
Area information
Area information is a type of text message that is sent to all subscribers within a certain
network area. When you receive an area information message, the message automatically
appears on the screen. Press Save to save the message in your inbox, or Discard to
delete the message.
Area information
To turn area information on or off
Please consult your service
provider for more information
about area information.
} Messaging } Settings } Area info } Reception.
Cell information
The cell information channel is used by some network operators to send messages
about a certain network area to their subscribers within that area.
To turn on cell information
} Messaging } Settings } Area info } Cell information.
73
This is the Internet version of the user's guide. © Print only for private use.
74
This is the Internet version of the user's guide. © Print only for private use.
Pictures and sounds
Here you can see how to take photos and record video clips.
These can be sent as messages or uploaded to a personal
album on Vodafone live!. With the Postcard function, you
can learn how to send photos as a traditional postcard.
You can also see how to compose your own melodies using
MusicDJ™ and record sounds with the sound recorder.
75
This is the Internet version of the user's guide. © Print only for private use.
Camera and video recorder
4.1
Your phone has a digital camera which also works as a digital video recorder. You
can take pictures, record video clips, save and view them and send them as email
To activate the camera
While in standby, slide the lens cover to activate the camera.
To take pictures and video clips
1. Use the navigation key to switch between camera and video recorder.
2. Press
to take a picture or start recording.
3. To end video recording, press again. To deactivate the camera, close the lens cover.
Note:
If you try to record a strong light source such as direct sunlight or a lamp, the screen
may black out or the picture may be distorted
To use the zoom
Use the volume buttons on the side of the phone to zoom in and zoom out.
To adjust brightness
Use the navigation key to increase or decrease brightness.
To turn on the photo light
To take pictures in a dimly lit environment, press
.
76
This is the Internet version of the user's guide. © Print only for private use.
To view your pictures and video clips
When the camera or video is activated } View.
Camera and video options
When the camera or video is activated } Settings to view more options. Before you
take a picture or make a video clip, the following options are available:
• Switch to video camera – to record a video clip instead of taking a picture.
• Switch to still camera – to take a picture instead of recording a video clip.
• Shoot mode (camera) – select from Normal for no frame, Panorama to combine
several pictures into one wide picture, Frames to add a frame to your picture and
Burst to take four pictures in rapid succession.
• Shoot mode (video) – select High quality video or For MMS if you want to send
your video clip as a picture message.
• Picture size – choose between 1280x1024, 640x480 and 160x120. All phones
that support pictures can receive the size 160x120.
• Video size – choose between Large 176x144 and Small 128x96.
• Turn on night mode – enhance picture or video quality in poor lighting conditions
with longer exposure time.
• Turn on light – to enhance lighting conditions.
• Turn on self-timer – the picture is taken a few seconds after you press the camera
button.
• Effects – select different effects for your picture or video.
• White balance – adjust the picture or video colour to the lighting conditions.
• Picture quality – choose between Normal and Fine picture quality.
• Turn on time and date – add a time and date to your picture.
77
This is the Internet version of the user's guide. © Print only for private use.
Saving pictures and video clips
When you have taken a picture or recorded a video clip, it is saved in the phone memory,
Sending pictures and video clips
When you have taken a picture or recorded a video clip, you can send it as a picture
Before you start the receiving phone needs to support data transmission and picture
messaging in order to receive and show the picture or video clip.
• Before you send a picture or video clip using picture messaging make sure that you
• Before you send a picture or video clip using email make sure that you have entered
To exchange pictures and video clips using other transfer methods
To send a picture
When you have taken a picture } Send to send the picture.
To send and play video clips
When you have finished your recording, } Send to send the video clip.
} More } Play to play or press
to delete the video clip.
78
This is the Internet version of the user's guide. © Print only for private use.
Postcard
More ways of sending
postcards
As part of Vodafone live! you can have a message with picture and text delivered
as a postcard to a street address.
To send a postcard
You can also create a
postcard by selecting
1. Take the picture by pressing the camera button.
My Items } Pictures.
Select a picture } More
} Send } Live! Postcard.
2. } Send } Live! Postcard.
3. Write your message } OK.
4. } Send } Address to enter name and address, or you can either select Contacts
look-up to retrieve a contact, or select a recipient from the list of previous recipients.
5. When you have entered name and address } OK } Send. The picture and message
will be printed on a postcard and sent to the address that you select.
Note:
This service is not available in all countries.
live! Studio
With Vodafone live!, you can save pictures in a Web-based album. This is useful if you
are running out of phone memory, or if you wish to share your pictures with friends in
a virtual album that they (and you) can access on the Web. You can upload a picture
in the following ways:
To upload a picture
• } My Items } Pictures, select a picture, More } Send } live! Studio.
• From the camera,
} Send } live! Studio.
• You can also upload a message by selecting a folder in Messaging, highlight
a message, More } live! Studio.
Note:
Visit www.vodafone.com for details. This service is not available in all countries.
79
This is the Internet version of the user's guide. © Print only for private use.
Pictures
4.2
Your phone comes with a number of pictures and animations. You can delete these
pictures if you want to free memory. All pictures are saved in My Items } Pictures.
You can:
Setting screen savers and wall-
• Use a picture as wallpaper and as a screen saver.
papers from My Items
• Exchange pictures using one of the available transfer methods.
• Upload pictures to the Vodafone live! Studio, %79 live! Studio.
} My Items } Pictures,
highlight a picture } More
} Use as } Screen saver
or Wallpaper
Handling pictures
You can add, edit and delete pictures in My Items. The number of pictures that you
SVG-Tiny.
To view your pictures
1. } My Items } Pictures.
2. The pictures are shown in thumbnail view. To get a full view } View.
To display pictures in a slide show
1. } My Items } Pictures and scroll to a picture.
2. } View } More } Slide show.
To view information about a picture or video clip
1. } My Items } Pictures or Videos, select the picture or video clip.
2. } More } Information.
80
This is the Internet version of the user's guide. © Print only for private use.
Using pictures
You can use a picture for several purposes, for example, add it to a contact, use it in the
start-up screen, or use it as a screen saver.
The screen saver is activated automatically when you have not pressed any key for a few
seconds. After a few more seconds, the screen saver changes to sleep mode, to save
power. Press any key on the keypad and the screen turns on again. If you have a picture
as wallpaper, this picture is shown in standby mode.
To use a picture
1. } My Items } Pictures and scroll to the picture you want to use } More
} Use as.
2. Select what you want to use the picture for.
PhotoDJ™
When editing pictures press
the tool, to select the tool and
,
,
,
and the following keys:
to select a colour.
to activate
To edit and save a picture
1. } Entertainment } PhotoDJ™ and scroll to the picture you want to edit } Select.
Some pictures you have taken with the camera can be edited.
2. To save the edited picture } More } Save picture.
Exchanging pictures
You can exchange pictures using one of the available transfer methods. Please note
that you are not allowed to exchange copyright-protected material. For more information
To send a picture
} My Items } Pictures and scroll to the picture you want. } More } Send and select
a transfer method.
81
This is the Internet version of the user's guide. © Print only for private use.
To receive and save a picture
1. Open the message you received the picture in, or turn on Bluetooth or the infrared
port if one of these transfer methods was used to send the picture.
2. If you received the picture in a message, select the picture and save it. If you
received the picture via Bluetooth or infrared, follow the instructions that appear
on the screen.
Note:
All phones that support pictures can receive the picture size 160x120. Some phones
that support pictures cannot receive picture sizes of more than 160x120. The best
picture size to view on a computer is 1280x1024.
Remote screen
You can view your pictures on a remote screen, for example, a TV, using a compatible
Bluetooth adapter. The adapter is an accessory and not included in the box. You can
then use the phone to control the screen. Use the slide show function to show several
pictures in succession.
To connect to a remote screen
} My Items } Pictures and scroll to the picture you want } View } More } Remote
screen. The phone searches for other Bluetooth devices and a list of available devices
is displayed. Select the device you want to use.
82
This is the Internet version of the user's guide. © Print only for private use.
4.3
Radio
Your phone features an FM radio with RDS functionality. To use the radio, you must
connect the handsfree to your phone. The handsfree works as an antenna and makes
Note:
You must switch your phone on to use the radio. Do not switch the phone on in areas
To listen to the radio
Connect the handsfree to your phone } Radio.
Radio control
• } Search to find the next channel on the band.
• Press
continuously.
• Press or
or
to move 0.1 MHz along the FM band. Press and hold to move
for the next preset channel.
Saving radio channels
You can save up to 20 of your favourite radio channels.
Note:
To save channels quickly in positions 1 to 10, press and hold 0–9, (where 0 represents
the number 10). To select a channel you have saved in positions 1 to 10, press 0–9.
To save a radio channel
} More } Save } Insert. The channel is saved in a list.
83
This is the Internet version of the user's guide. © Print only for private use.
Radio options
} More for the following options:
• Minimize – return to standby to use other functions with the radio still playing.
• Save – save the current frequency in a list of channels.
• Channels – select, rename, replace or delete saved channels.
• Turn on speaker – listen through the loudspeaker.
• Auto save – automatically search for and save channels in a list of channels.
Previously saved channels will be replaced.
• Set frequency – enter a frequency manually. The figures you enter will be
automatically adjusted to valid frequencies. Press
to go directly to Set
frequency.
• RDS – options to turn on or off alternative frequency (AF) and to show or hide station
information.
• Turn on Mono – turn mono sound on.
While listening to the radio
If you minimize the radio display, you can listen to the radio and use another
functionality at the same time. For example, you can make and receive calls,
send messages and play games.
To minimize the radio display
} Radio } More } Minimize.
To adjust the volume
Press
or
.
84
This is the Internet version of the user's guide. © Print only for private use.
4.4
Composing melodies
™
You can compose and edit melodies to use as ringtones using the MusicDJ . A melody
consists of four types of tracks – Drums, Basses, Chords, and Accents. A track
contains a number of music blocks. The blocks consist of pre-arranged sounds with
different characteristics. The blocks are grouped into Intro, Verse, Chorus and Break.
You compose a melody by adding music blocks to the tracks.
To compose a melody
1. } Entertainment } MusicDJ™.
2. Choose to Insert, Copy and Paste blocks to compose your melody. Use
,
,
or to move between the blocks. Press to delete a block. } More to
view more options.
To edit a previously created melody
} My Items } Sounds and select the melody } More } Edit.
Sending and receiving
You can send and receive melodies using one of the available transfer methods.
Please note that you are not allowed to exchange copyright-protected material.
Note:
You cannot send a polyphonic melody or an MP3 file in a text message.
85
This is the Internet version of the user's guide. © Print only for private use.
To send a melody
1. } My Items } Sounds and select a melody.
2. } More } Send and select a transfer method.
To receive a melody
1. Open the message you received the melody in, or turn on Bluetooth or the infrared
port if these transfer methods are being used to send the melody.
2. When you receive the melody, follow the instructions that appear on the screen.
86
This is the Internet version of the user's guide. © Print only for private use.
4.5
Creating movies
With the VideoDJ™, you can create movies by combining video clips and pictures that
you have saved in your phone. You can also use VideoDJ™ to trim video clips and edit
video items.
To create a movie
1. } Entertainment } VideoDJ™.
2. } Add. Select to add a Video clip, a Picture or Text } Select.
To edit a video clip
1. } My Items } Videos } Open and choose the video clip you want to open.
2. } More } Edit } Edit to Trim, Replace or Delete a clip from the current movie.
To edit a picture
1. } Entertainment } VideoDJ™.
2. } Add } Picture. Choose the picture you want to edit and } Select.
3. } Edit.
4. } Replace to replace a picture, } Duration to change the picture duration
in the movie or } Delete to delete the picture from the current movie.
To edit text
} Edit to change a text string, } Background to change the text background,
} Text colour to change the font colour, } Duration to change the duration
of the text in the movie or } Delete to delete the text from the current movie.
87
This is the Internet version of the user's guide. © Print only for private use.
VideoDJ™ options
When a movie is selected, } More to view more options:
• Preview – to view the movie.
• Insert – to insert an item.
• Save – to save the current movie.
• Send – to send the current movie.
• New – to open another movie.
• Soundtrack – to add a soundtrack to the current movie.
Sending and receiving movies
You can send a movie using one of the available transfer methods. Short movies can
be sent using MMS. If a movie is too long, you can use the Trim function to make
a movie shorter.
Movies that you receive and save are saved in messenger.
To trim a video clip
1. Select a video from the storyboard } Edit } Trim.
2. } Set to set the start point and } Start.
3. } Set to set the end point and } End.
4. You can repeat steps 2 and 3 until you are satisfied. } Done to finish the trim.
88
This is the Internet version of the user's guide. © Print only for private use.
4.6
Sound recorder
With the sound recorder, you can record either your own memos or calls. Recorded
sounds can also be set as ringtones. Recording of a conversation is stopped if a
participant ends the call. Recording of all sounds stops automatically if you receive
a call. If the recordings are saved in the phone they can be accessed even if you change
your SIM card.
Note:
In some countries or states it is required by law that you inform the other person before
recording the call.
To start a sound recording
1. } Entertainment } Record sound.
2. Wait until you hear a tone. When the recording starts, Recording is displayed
together with the time of the current recording (increasing).
3. } Save to end the recording, and } Play to listen to the recording. } More to view
the following options: Record new, Send, Rename, Delete, Recorded sounds.
To listen to your recordings
1. } My Items } Sounds and select the recording you want to hear.
2. } Play to listen to the recording and } Stop to stop playback.
89
This is the Internet version of the user's guide. © Print only for private use.
90
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live! and Internet
Vodafone live! offers pictures, video clips, ringtones and
games all of which can be easily downloaded with the Internet
browser.
Use the media player to stream video and sound to your
phone, and play and organize your video and sound files.
91
This is the Internet version of the user's guide. © Print only for private use.
Vodafone live!
5.1
Vodafone live! has everything you need, full of information downloads, games, music
and services. It is easy to use, and because the GPRS or even faster 3G connection can
be “always on” there is no wait for dialling up. You pay only for data you send or receive,
not for how long you are connected.
Browsing
Connect to
Vodafone live!
Simply use the navigation key
to highlight the item you want
Press and hold the
main menu. To exit, press and hold
Vodafone live! key (in standby) to connect to the Vodafone live!
.
to select, then press
open that page.
to
You can also go to the Vodafone live! offline Web page } Vodafone live!. This menu
is offline, so you will not be connected until you choose a link. The following describes
some of the services you can choose:
Press
to go back a page.
} More to view more browsing
options.
Vodafone live! services
• More sounds – download sounds and ringtones.
• More pictures – download pictures, animations and wallpaper.
• More games – download new games to your phone.
• Video & Audio – download or stream video and music clips.
• New themes – download a new look for your phone’s menus.
• Media Album – online storage for your pictures and sounds.
• Vodafone Mail – a single mailbox for all your email messages, voicemail and faxes.
• Vodafone Messenger – instant messaging on your mobile.
• News – get the latest news reports and weather forecasts.
• Sport – news, results, and latest scores.
• Search – find what you need in Vodafone live!
92
This is the Internet version of the user's guide. © Print only for private use.
Tip! Vodafone live! is growing and changing all the time, so these options may vary.
Keep checking it out to see what´s new.
Note:
Questions about Vodafone! live products and services should be directed to Vodafone
Customer Services.
93
This is the Internet version of the user's guide. © Print only for private use.
Internet
5.2
Settings
Before you start using Internet or messenger, settings are required in your phone.
In order to use the Internet, and send and receive picture and email messages
or Messenger, you need the following:
• A phone subscription that supports data transmission.
• Settings entered in your phone.
• You may also have to register as an Internet and email user with Vodafone
Customer Care.
However, your phone has already been customized to give access to Vodafone live! –
Vodafone’s mobile Internet portal. You should already be registered, and do not need
to change or configure any settings. If you have problems connecting to Vodafone live!,
the Internet or using email, please contact your local Vodafone Customer Services or
Using Internet
Your phone has a browser that uses WAP (Wireless Application Protocol) or HTTP
(Hyper Text Transfer Protocol) to access the Internet.
To select an Internet profile
} Settings } the Connectivity tab } Internet settings } Internet profiles and
select the profile you want to use. Use
or
to scroll between the tabs.
94
This is the Internet version of the user's guide. © Print only for private use.
To start browsing
} Vodafone live! and select a service or } Vodafone live! } More and select an option.
To stop browsing
} More } Exit browser.
Options when browsing
} More to view different browsing options. The options may vary depending on which
site you are visiting.
Note:
If you select an email address when browsing a Web site, you can send a text message
to that address.
The options menu always contains the following:
• Exit browser – disconnect and go to standby.
• Go to the homepage set for the current Internet profile, for example, Sony Ericsson.
• Bookmarks – add the site you are currently browsing to your list of bookmarks, or
view the list of bookmarks. A list of ongoing or suspended downloads may be shown.
• Enter address – enter the Web page address of a site you want to visit.
} New address to enter a new Web page address or select one of the 10 latest
entered addresses. When you enter a Web page address, the normal http:// prefix
is not needed.
Send a message
If you highlight an email address
when browsing a Web site, you
can send a text message to
that address.
• History – list of previously visited sites.
• Refresh page – refresh the contents of the Web page.
• Save – save the Web page or a picture from the current Web page.
• Send link – send a link to the current site to another phone.
• Appearance – select to play the sounds or show the pictures on visited pages.
• Clear cache – clear all temporary stored Internet files saved in the phone.
95
This is the Internet version of the user's guide. © Print only for private use.
• Status – display current status information, for example, profile, access type,
security, address.
• Make a call – if your subscription supports it, you can make a call while browsing
the Internet. } More } End call to end the call and continue browsing.
Using bookmarks
You use bookmarks in your mobile phone just as you do with a computer Internet
browser. You can create and edit bookmarks.
To work with bookmarks
More download options
1. } Vodafone live! } More } Bookmarks and select a bookmark } More.
2. Select an option.
You can also download via
My Items } Pictures or
Sounds. Selecting More
Pictures will connect you
directly to the Image Download
section of Vodafone live! (for
wallpapers, etc.). More
Downloading
You can download, for example, pictures, themes, games and ringtones from Vodafone
live! directly to the My Items in your phone.
1. Press and hold the Vodafone live! key on your phone. This will connect you directly
to Vodafone live!.
Sounds connects you to the
Sound Download section (for
ringtones, etc.). You can
download games via Games }
More games. This connects
you to the Games Download
section.
2. Click on the Downloads link, and choose the item you want to download. Follow
the instructions to start downloading.
3. Your phone will automatically guide you through the process of installing your
downloaded items.
Stored information
When browsing, you can save information in your phone.
Note:
It is advisable to clear any sensitive information about previously visited Internet
services. This is to avoid a security risk if your phone is misplaced, lost or stolen.
96
This is the Internet version of the user's guide. © Print only for private use.
The following information can be saved:
• Cookies – improve site access efficiency.
• Passwords – improve server access efficiency.
To allow or clear cookies in your phone
} Settings } the Connectivity tab } Internet settings } Cookies and select
an option and confirm. Use
or
to scroll between the tabs.
To clear the password list
} Settings } the Connectivity tab } Internet settings } Clear passwords and
} Yes to confirm. Use or to scroll between the tabs.
Internet profile for Java™ applications
Some Java™ applications need to connect to the Internet to receive information,
for example, games that download new levels from a game server.
You need an HTTP Internet profile to allow Java™ applications to connect to the
Internet. Please contact your network operator or service provider for the correct
settings.
To select a profile for Java™
} Settings } the Connectivity tab } Settings for Java™ } Internet profiles.
Use
or
to scroll between the tabs.
Select the HTTP profile you want to use Java™ applications
You can run Java™ applications on your phone. Games and other Java applications
can be downloaded to your phone from the Internet.
97
This is the Internet version of the user's guide. © Print only for private use.
Java application security
Java applications are automatically installed as "Trusted" or "Untrusted". Trusted
applications are allowed to, for example, connect to networks, send messages or use the
camera without asking for permission. Untrusted applications, however,
must always confirm such actions with you first. You can set different permission
levels for your Java applications.
To set permissions for a Java™ application
1. } My Items } Applications or } Games.
2. Select an application or a game } More } Permissions.
3. Select permission option.
4. } No, Always ask or Ask once to set the permission level you want for the selcted
application.
Java application screen size
Some Java applications are designed for a specific screen size. In some cases,
applications may not be able to start because the phone cannot adapt the application
to the screen. Contact the application vendor to find out what screen size the application
is designed for, and change the screen settings for the application in the phone.
To set the screen size for a Java application
1. } My Items } Applications or } Games.
2. Select an application or a game } More } Screen size.
3. Select one of the listed options. If you selected User defined you can edit the
Width: and Height: values.
98
This is the Internet version of the user's guide. © Print only for private use.
Internet security
Your phone has support for both WAP and HTTP secure browsing. To activate a secure
connection to the WAP gateway, you need to turn on security in your Internet profile.
If your Internet profile is an HTTP profile, the connection will be secure if the URL starts
with https://. The security setting is therefore not available for HTTP profiles.
Note:
Security for a connection between a WAP gateway and a WAP service provider is the
responsibility of the WAP service provider.
To turn on a secure connection (WAP)
1. } Settings } the Connectivity tab } Internet settings } Internet profiles and
select a profile } More } Settings. Use
or
to scroll between the tabs.
2. Turn on security.
Trusted certificates
To establish a secure connection when using certain Internet services, for example,
banking, you need certificates in your phone.
Trusted certificates are used to verify the WAP gateway or the HTTP server that you are
connecting to. Your phone may already contain trusted certificates when you buy it. You
can also download new certificates using the browser.
To check the certificates in your phone
} Settings } the Connectivity tab } Internet settings } Security } Trusted cert.
Use
or
to scroll between the tabs.
99
This is the Internet version of the user's guide. © Print only for private use.
Downloading
5.3
3G downloading
Change your phone whenever you want by downloading new polyphonic ringtones,
videos, games and applications from Vodafone live!.
When the 3G icon is displayed,
you will notice an immediate
difference - downloads are
significantly faster.
To download games
1. } Entertainment } Games } More games.
2. Follow the instructions on the screen.
100
This is the Internet version of the user's guide. © Print only for private use.
5.4
live! Studio
Picture upload
With Vodafone live! you can save pictures in a Web-based album. This is useful if you
are running out of phone memory, or if you wish to share your pictures with friends in
a virtual album that they (and you) can access on the Web. You can upload a picture
in three ways.
To upload a picture
• } My Items } Pictures, select a picture, More } Send } live! Studio.
• From the camera,
} Send } live! Studio.
• You can also upload a message by selecting a folder in Messages, highlight
a message, More } live! Studio.
To download a picture
1. } My Items } Pictures } More Pictures.
Note:
Visit www.vodafone.com for details. This service is not available in all countries.
101
This is the Internet version of the user's guide. © Print only for private use.
Media Player
5.5
The media player works as a music player and video player all in one. You can play
music and video clips that you receive in a picture message, or that you download to
your phone. The following file types are supported by the media player: MP3, MP4, 3GP,
AAC, AMR, MIDI, WAV (with 16 kHz as maximum sample rate) and Real®8. You can
also stream music and videos from Web sites.
Playlists
To organize the media files that are stored in the My Items you can create playlists.
A playlist can contain music as well as video clips. Files in a playlist can be sorted by
artist, title or by the order in which the files were added to the playlist. You can add a file
to more than one playlist.
The playlists All music and All videos are automatically generated and contain all
music and video files that are saved in the phone memory. You cannot delete or rename
these playlists.
Note:
When you delete a playlist or a file from the playlist, it is not deleted permanently from
the phone memory. You can add the file to another playlist.
To create a playlist
1. } Media Player } New playlist enter the name of the playlist } OK.
2. Select among the files that are available in My Items. You can add several files
at a time and you also add folders. All files in the selected folders will be added
to the playlist.
102
This is the Internet version of the user's guide. © Print only for private use.
To add files to a playlist
1. } Media Player select a playlist } Open } More } Add media.
2. Select among the files that are available in My Items.
To remove files from a playlist
} Media Player select a playlist } Open. Select the file } More } Delete.
To delete playlists
Play media files
} Media Player select a playlist } More } Delete playlist.
You can also play individual
media files from the Sounds
folder in My Items. However,
you can only play playlists from
the media player application.
Music and video clips
To play music and videos
} Media Player and select a playlist } Open } Play. The playlist keeps on playing
until you } Pause or } Stop.
To change play mode
} Media Player } More } Play mode. Select Shuffle on to play the playlist files
in random order, or Loop on to restart the playlist when the last file has been played.
Note:
You can also change the play mode from within the playlists.
Media player control
• } Pause to pause the playback.
• Press
• Press and hold
• Press and
highlighted will not be selected until you press } Stop } Play.
• When a video clip is paused, press to play the video clip one frame at a time.
or
to go forward or back to the next music track or video clip.
or to fast forward or rewind.
to scroll through the playlist during playback. Files that are
103
This is the Internet version of the user's guide. © Print only for private use.
Media player options
} More to view the following options:
• Play mode – change the playback order of songs and videos. Select Loop
or Shuffle.
• Equalizer – change the settings of the treble and bass when playing music.
• Rename – rename the playlist. You can only rename user-created playlists.
• Delete playlist – delete the playlist. Only the playlist is deleted; the files are
still listed in the My Items. You can only delete user-created playlists.
Media options
When you have opened a playlist, } More to view the following options:
• Information – view information about the current track or video.
• Add media – add files or folders to the playlist.
• Minimize – minimize the media player and return to standby. The music or video
continues to play and you can use other applications and functions in the phone.
• Play mode – change the playback order of songs and videos.
• Equalizer – change the settings of the treble and bass when playing music.
• Sort – sort the playlist by artist, title or by the order in which files were added to the
playlist.
• Send – send a sound or video file.
• Delete – remove the file from the playlist.
• Fullscreen – play the video clip in full screen and in horizontal mode.
• Capture frame – capture a picture from the video clip.
Online music and videos
You can view videos and listen to music that you find on a Web site by streaming them
to your phone. When browsing and when you have found a link for streaming, the media
player will open automatically when the link is selected.
104
This is the Internet version of the user's guide. © Print only for private use.
In order to stream you must have a data account and the links have to be 3GPP™
(3rd Generation Partnership Project) compatible. Your phone may be pre-configured
To select a data account
1. } Settings } the Connectivity tab } Streaming settings. Use
between the tabs.
or
to scroll
2. Select the data account you want to use.
To stream video and audio
1. } Vodafone live! } More } Enter address.
2. Enter or choose the address to a site and select a link to stream from.
To stream saved music and videos
1. } Vodafone live! } More } Bookmarks.
2. Select a link to stream. The media player will open and play the streamed music
or video.
105
This is the Internet version of the user's guide. © Print only for private use.
106
This is the Internet version of the user's guide. © Print only for private use.
Connectivity
You can connect your phone using Bluetooth™ wireless
technology, the infrared port or by using the USB cable
that comes with the phone.
When your phone is connected to another device, for example
a PC or another phone, you can synchronize contacts and
calendar items, or transfer content between the phone and
the PC or between the phones.
You can use Bluetooth wireless technology to connect
accessories to your phone, for example portable handsfree
equipment.
107
This is the Internet version of the user's guide. © Print only for private use.
Synchronizing
6.1
You can synchronize your phone contacts, appointments, tasks and notes with similar
programs in, for example, a computer or mobile phone using Bluetooth, the infrared
port or the USB cable (synchronization with nearby devices). Synchronization software
for your computer is available on the CD that comes with the phone, or you can download
You can also synchronize with programs on the Internet using WAP or HTTP
(remote synchronization with Internet services).
Note:
When using USB, make sure you only use the USB cable that comes with the phone.
To select sync order for names
} Contacts } Options } Advanced } Sync. order to select the order in which first
and last name appear in the phone when you synchronize contacts.
Synchronization with nearby devices
Install the computer synchronization software from the CD that comes with your phone
to the computer synchronization software help.
Remote synchronization with Internet programs
Contact your network operator for more information about the programs on the Internet
with which you can synchronize, and to receive username, password and addresses for
the different programs. You must also have an Internet profile set in your mobile phone
108
This is the Internet version of the user's guide. © Print only for private use.
To enter the remote synchronization settings
1. } Organiser & Tools } Synchronization } New account. If you do not have
an account, you will be asked if you want to create an account. } Yes to create
a new account.
2. Enter a name for the new account } Continue. A list of items to enter will appear.
Add the server address of the synchronization server, a server username and
a server password. } OK when you have entered each setting.
3. } Connection and select the WAP or HTTP profile that you want to use for the
synchronization.
4. } Remote initiation to set whether to allow the synchronization server or other
device to initiate a synchronization or not. You can also choose to always be asked.
5. } Sync. interval to set how often you want the phone to automatically connect
to the server and start syncronization.
6. } Applications and select the applications that you want to synchronize, for example,
Contacts } OK.
7. } App. settings and select an application. Enter the name of the database and,
if required, your username and password } OK.
8. Press
} Save to save your new account.
To start the remote synchronization
} Organiser & Tools } Synchronization and select a remote account } Start.
109
This is the Internet version of the user's guide. © Print only for private use.
Bluetooth™ wireless technology
6.2
Your phone has built-in Bluetooth which makes it possible for you to connect your
phone wirelessly to other Bluetooth devices. You are able to be connected to several
Bluetooth devices at the same time. You can automatically synchronize information
in your phone and your computer and use the remote control functionality to control
applications on your computer. You can also exchange, for example, business cards,
calendar items and pictures.
Note:
We recommend that your phone and the Bluetooth device you are communicating with
are within a range of 10 metres. The connection may be improved if there are no solid
objects between your phone and the other Bluetooth device.
Bluetooth range
Your phone can communicate
with other Bluetooth devices
within a range of up to 10 to 20
metres. The connection may be
improved if there are no solid
objects in between your phone
and the other Bluetooth device.
Before you start
To communicate with another Bluetooth device, you first need to turn Bluetooth on.
You then need to add the device to the list of devices in your phone. You can exchange
items, use a remote screen and play games without adding the device to the list.
To synchronize with your computer and browse the Internet, you also need to install
software on your computer from the CD that comes with your phone, or download
Note:
Please check if local laws or regulations restrict the use of Bluetooth. If Bluetooth is not
allowed, you must ensure that the Bluetooth function is turned off. The maximum allowed
Bluetooth radio output power in the phone is automatically adjusted according to possible
local restrictions. This means that the range may vary.
110
This is the Internet version of the user's guide. © Print only for private use.
To turn Bluetooth on
} Settings } the Connectivity tab } Bluetooth } Turn on. Use
or
to scroll
between the tabs.
To add a device to your phone
1. } Settings } the Connectivity tab. Use
or
to scroll between the tabs.
2. } Bluetooth } My devices } New device. The Bluetooth function of the other
device must also be on and not hidden.
3. } Add and your phone will search for all types of available Bluetooth devices.
4. A list of available devices is displayed. Select a device.
5. If the device you are adding to your phone has its own passcode, enter this passcode
in your phone. If not, create a passcode of digits yourself and enter it in both devices.
To organize your list of devices
1. } Settings } the Connectivity tab } Bluetooth } My devices and select a device
from the list. Use
or
to scroll between the tabs.
2. } More to view a list of options.
Phone name
Choose a unique name for your phone. This name is shown in other devices when your
phone is found.
To enter a phone name
} Settings } the Connectivity tab } Bluetooth } Phone name. Use
or
to scroll between the tabs.
111
This is the Internet version of the user's guide. © Print only for private use.
Visibility
In order for your phone to be found when searched for by other Bluetooth devices, you
must make sure that Bluetooth is turned on and your phone is visible to other devices.
To hide or show your phone when using Bluetooth
1. } Settings } the Connectivity tab } Bluetooth } Visibility. Use
to scroll between the tabs.
or
2. } Show phone or Hide phone.
Sending and receiving
To send or receive an item using Bluetooth, you need to make sure that the devices are
within range.
After you select Bluetooth as the transfer method for sending, a list of possible receiving
devices is presented.
To send an item (example: a contact)
1. } Contacts and select a contact, } More } Send contact } Via Bluetooth.
The phone searches for devices.
2. Select the device you want to send the item to } Select.
To receive an item
1. } Settings } the Connectivity tab. Use
or
to scroll between the tabs.
2. } Bluetooth } Turn on.
3. Make sure that your phone is visible to other devices Bluetooth } Visibility
} Show phone. When you receive the item, follow the instructions that appear
on the screen.
112
This is the Internet version of the user's guide. © Print only for private use.
To add a Bluetooth handsfree to your phone
1. } Settings } the Connectivity tab } Bluetooth } . Use
or
to scroll
between the tabs.
2. The first time you add a handsfree, Add a handsfree device to use with the
phone? is displayed } Yes.
3. If you already have a handsfree in your list of devices, } Settings } the Connectivity
tab } Bluetooth } Handsfree } My handsfree } New handsfree } Add. You
should ensure that your Bluetooth handsfree is in pairing mode.
Transferring sound
When you are using a Bluetooth handsfree with your phone, you can choose to transfer
the sound either to the phone or to another handsfree device that has been added to
your phone.
To transfer sound when using a handsfree
During a call, press
} Transfer sound.
Directing sound
You can select where the sound should be handled when answering an incoming call
with the keypad on the phone. If you use the button on the handsfree, the sound will
always be in the handsfree.
To direct sound when answering a call with a handsfree
1. } Settings } the Connectivity tab } Bluetooth } Handsfree } Incoming call.
Use
or
to scroll between the tabs.
2. } In phone if you always want to have the sound in the phone or In handsfree
if you want to direct the sound to the handsfree.
113
This is the Internet version of the user's guide. © Print only for private use.
Remote control
You can use your phone as a remote control device to control computer applications
®
®
such as a media player or Microsoft PowerPoint presentations. Your computer must
support the Bluetooth HID Profile.
To select remote control
1. } Entertainment } Remote control.
2. Select the application you want to use and the computer you want to connect to.
File transfer using Bluetooth
You can use a computer to view and transfer content in My Items. Install the My Items
software using the CD that comes with your phone, or download the software from
to:
• Transfer files between your phone and the computer.
• Delete files.
Note:
Your computer needs to have one of the following operating systems to be able to use
this feature: Windows® 2000, Windows ME, Windows XP and Mac OS X.
114
This is the Internet version of the user's guide. © Print only for private use.
6.3
Infrared port
You can use the infrared port to transfer files between your phone and a computer
or another device equipped with an infrared port. You can, for example, synchronize
and send items such as pictures and contacts.
Note:
If you are connecting to a computer, please refer to its user documentation. Make sure
that the infrared speed in the computer is set to 115200 bps.
To turn the infrared port on
1. } Settings } the Connectivity tab. Use
or
to scroll between the tabs.
2. } Infrared port } On or } 10 minutes to turn on infrared for 10 minutes only.
To connect two devices
1. Turn on the infrared port of both devices.
2. Make sure that the infrared port on your phone faces the infrared port on the
other device.
3. Your phone now establishes contact with the other device.
To send an item using the infrared port (example: a contact)
1. Make sure that the infrared ports of both devices are on. } Contacts and select
a contact.
2. } More } Send contact } Via infrared.
115
This is the Internet version of the user's guide. © Print only for private use.
File transfer using the infrared port
You can use a computer to view and transfer content in My Items. Install the My Items
software using the CD that comes with your phone, or download the software from
• Transfer files between your phone and the computer.
• Delete files.
Note:
Your computer needs to have one of the following operating systems to be able to use
this feature: Windows® 2000, Windows ME, Windows XP and Mac OS X.
116
This is the Internet version of the user's guide. © Print only for private use.
6.4
Transferring files using the USB cable
You can connect your phone to a computer using the USB cable. Install the USB cable
software using the CD that comes with your phone, or download the drivers from
Note:
Make sure you use only the USB cable that comes with the phone, and that you connect
the USB cable direct to your computer.
File transfer using the USB cable
You can use a computer to view and transfer content in My Items. Install the My items
software using the CD that comes with your phone, or download the software from
computer to:
• Transfer files between your phone and the computer.
• Delete files.
Note:
Your computer needs to have one of the following operating systems to be able to use
this feature: Windows® 2000, Windows ME and Windows XP
117
This is the Internet version of the user's guide. © Print only for private use.
118
This is the Internet version of the user's guide. © Print only for private use.
Settings
You can use settings to personalize your phone by changing
the appearance of the screen and changing the ringtone.
You can also use settings to protect your phone from
unauthorized use. Use the SIM card or phone lock features.
119
This is the Internet version of the user's guide. © Print only for private use.
Setup wizard
7.1
You can use the setup wizard to help you get started with the basic settings in your phone.
If you do not want help the first time you turn on your phone, you can choose to use the
wizard later. You can also select to start the wizard from the menu system at any time.
The wizard gives you tips on how to use the keypad and guides you through some basic
settings.
To start the setup wizard from the menu system
1. } Settings } the General tab } Setup wizard.
2. Select language for your phone.
3. To use the wizard } Yes and follow the instructions that appear to complete the setup.
120
This is the Internet version of the user's guide. © Print only for private use.
7.2
Time and date
The time is always displayed in standby.
To set the time and date
• } Settings } the General tab } Time & date } Time. Enter the time } Save.
• To set the time format (12-hour or 24-hour clock) } Format and select an option.
• You can set the date and date format in } Settings } the General tab
} Time & date } Date.
121
This is the Internet version of the user's guide. © Print only for private use.
Start-up screen and power save
7.3
Start-up screen
When you turn your phone on, the start-up screen appears. You can also set your own
start-up screen.
To select a start-up screen
} Settings } the Display tab } Start-up screen and select an option for the start-up
screen. Use
or
to scroll between the tabs.
Power save
You can choose to turn this feature on or off if you do not want to use several Bluetooth
functions at the same time. If you turn it on, the phone will save power and it will prevent
other devices from connecting to your phone when you are already connected to one.
To save power
} Settings } the Connectivity tab } Bluetooth } Power save } On. Use
or
to scroll between the tabs.
122
This is the Internet version of the user's guide. © Print only for private use.
7.4
Themes
You can change the appearance of the screen, for example, the colours and wallpaper,
by using themes. Your phone comes with some predefined themes. You cannot delete
these, but you can download new themes from Vodafone live!
To select or change a theme
} My Items } Themes and select a theme.
Exchanging themes
You can exchange themes using one of the available transfer methods.
To send a theme
1. } My Items } Themes and select a theme.
2. } More } Send and select a transfer method.
To download a theme
1. } My Items } Themes } More themes.
2. Follow the instructions on the screen.
To receive and save a theme
1. Open the message you received the theme in, or turn on Bluetooth or the infrared
port if these transfer methods are being used to send the theme.
2. When you receive the item, follow the instructions that appear on the screen.
123
This is the Internet version of the user's guide. © Print only for private use.
Ringtones and melodies
7.5
Your phone comes with a number of standard and polyphonic melodies that can be
used as ringtones. You can exchange melodies using one of the available transfer
methods. Please note that you are not allowed to exchange copyright-protected material.
Note:
If you want to use an MP3 file as a ringtone, you can only use some copyright-protected
files specially designed as ringtones. Please consult your network operator for more
information. If you select an MP3 file as a ringtone, you cannot use voice answering,
answering.
To select a ringtone
} Settings } the Sounds & alerts tab } Ringtone. Use
or
to scroll between
the tabs.
To turn the ringtone on or off
Press and hold
on or off.
from standby. All signals except the alarm signal are turned
To set the ringtone volume
1. } Settings } the Sounds & alerts tab. Use
or
to scroll between the tabs.
2. } Ring volume and press
or
to decrease or increase the volume.
3. } Save to save the setting.
124
This is the Internet version of the user's guide. © Print only for private use.
To download a ringtone
1. } My Items } Sounds } More Sounds.
2. Follow the instructions on the screen.
Caller-specific ringtones
If your subscription includes the Calling Line Identification (CLI) service, you can assign
Vibrating alert
You can choose to be notified of an incoming call by the buzzing of the vibrating alert.
You can set:
• On – all the time.
• On if in Silent – on when the ring volume is turned off or when you have set the
phone to silent.
• Off – all the time.
To set the vibrating alert
Settings } the Sounds & alerts tab } Vibrating alert and select the setting you want.
Use
or
to scroll between the tabs.
Sounds and alerts options
From Settings and the Sounds & alerts tab, you can set:
• Message alert – select how you want to be notified of an incoming message.
• Key sound – select what sound you want the keys to make when you press them.
125
This is the Internet version of the user's guide. © Print only for private use.
Profiles
7.6
Your phone has predefined profiles that are set to suit a certain environment. You can
reset all profile settings to the way they were set when you bought your phone.
To select a profile
} Settings } the General tab } Profiles } Select profile.
To change a profile setting
} Settings } the General tab } Profiles } Edit profile and select the setting that
you want to change.
To rename a profile
} Settings } the General tab } Profiles } Edit profile } Profile name. You cannot
rename the normal profile.
126
This is the Internet version of the user's guide. © Print only for private use.
7.7
SIM card lock
The SIM card lock protects your subscription, but not your phone itself, from unauthorized
use. If you change SIM cards, your phone still works with the new SIM card.
Most SIM cards are locked at the time of purchase. If the SIM card lock is on, you have
to enter a PIN (Personal Identification Number) every time you turn on your phone.
If you enter your PIN incorrectly three times in a row, the SIM card is blocked. This
is indicated by the message PIN blocked. To unblock it, you need to enter your PUK
(Personal Unblocking Key). Your PIN and PUK are supplied by your network operator.
You can edit your PIN and select a new four- to eight-digit PIN.
Note:
If the message Codes do not match appears when you edit your PIN, you entered
the new PIN incorrectly. If the message Wrong PIN appears, followed by Old PIN:,
you entered your old PIN incorrectly.
To unblock your SIM card
1. When PIN blocked is displayed, enter your PUK } OK.
2. Enter a new four- to eight-digit PIN } OK.
3. Re-enter the new PIN to confirm } OK.
127
This is the Internet version of the user's guide. © Print only for private use.
To edit your PIN
1. } Settings } the General tab } Locks } SIM lock } Change PIN.
2. Enter your PIN } OK.
3. Enter a new four- to eight-digit PIN } OK.
4. Re-enter the new PIN to confirm } OK.
To turn the SIM card lock on or off
1. } Settings } the General tab } Locks } SIM lock } Protection and select
On or Off.
2. Enter your PIN } OK.
128
This is the Internet version of the user's guide. © Print only for private use.
7.8
Keypad lock
You can lock the keypad to avoid dialling a number by accident.
Note:
Calls to the international emergency number 112 can still be made, even when the
keypad is locked.
Automatic keylock
In standby, automatic keylock means the keypad is locked a short while after you last
press a key.
To set the automatic keylock
} Settings } the General tab } Locks } Automatic keylock.
To lock the keypad manually
In standby press
} Lock keys.
You can still answer an incoming call and the keypad locks again after the call.
The keypad remains locked until you unlock it manually.
To unlock the keypad, press
} Unlock.
129
This is the Internet version of the user's guide. © Print only for private use.
Phone lock
7.9
The phone lock protects your phone against unauthorized use if it is stolen and the SIM
card is exchanged. You can change the phone lock code (0000) to any four- to eight-
digit personal code.
Automatic phone lock
If the phone lock is set to automatic, you do not need to enter your phone lock code until
a different SIM card is inserted in the phone.
Note:
It is important that you remember your new code. If you should forget it, you have
to hand in your phone to your local Sony Ericsson retailer.
To set the phone lock
1. } Settings } the General tab } Locks } Phone lock } Protection and select
an alternative.
2. Enter the phone lock code } OK.
To unlock the phone
If the phone lock is on, enter your code } OK.
To edit your phone lock code
} Settings } the General tab } Locks } Phone lock } Change code.
130
This is the Internet version of the user's guide. © Print only for private use.
More features
This chapter lists a number of useful features that are available
to you. For example, learn how to use the calendar and how to
use tasks.
You will also receive instructions on how to use the timer, the
alarm clock, notes and the calculator. Included in the phone is
also a feature that allows you to remember all your codes; the
code memo.
131
This is the Internet version of the user's guide. © Print only for private use.
Calendar
8.1
You can use the calendar to keep track of important meetings. The calendar
can be synchronized with a computer calendar or with a calendar on the Web,
Appointments
You can choose to add a new appointment or use an old one as a template by copying
and editing it. You can also set reminders for appointments.
To add a new appointment
1. } Organiser & Tools } Calendar and highlight the date for the appointment
} Select } New appointment } Add.
2. Enter details and confirm each entry.
To view an appointment
1. } Organiser & Tools } Calendar and select a day on which you have an
appointment (marked in bold).
2. Scroll to the appointment } View.
To view your calendar content
} Organiser & Tools } Calendar. Days on which you have appointments are marked
in bold. } More } View week to view a certain week.
132
This is the Internet version of the user's guide. © Print only for private use.
To set when reminders should sound
1. } Organiser & Tools } Calendar } More } Advanced } Reminders.
2. } Always if you want the reminder to sound even though the phone is turned off.
When the reminder sounds } Yes to read the appointment. } No to turn off the
reminder. A reminders option set in the calendar affects a reminders option set
in tasks.
Navigating in your calendar
Use the navigation key to move between days or weeks. In the monthly and weekly
views, you can also use the keypad as follows.
Back a week
Back a month
Back a year
Today’s date
Next week
Next month
Next year
Calendar settings
} Organiser & Tools } Calendar } More and select an option.
• View week – select, add, edit or delete appointments.
• New appointment – add a new appointment.
• Change date – change the date of your calendar.
• Advanced – for options to find, delete all, set reminders or select a start day for the
week.
Exchanging appointments
You can send and receive appointments using one of the available transfer methods.
To send an appointment
In the list of appointments for a certain day, select the item you want to send } More
} Send and select a transfer method.
133
This is the Internet version of the user's guide. © Print only for private use.
Tasks
8.2
You can keep track of phone calls you need to make or tasks that you need to do. You
can choose to add a new task or use an old one as a template by copying and editing it.
You can also set a reminder for a task.
To add a new task
1. } Organiser & Tools } Tasks } New task } Add.
2. Select a category. If the category is a phone call, enter the phone number
} Continue.
3. Enter a subject } Continue.
4. If you want to set a reminder for your task } Yes.
To view a task
} Organiser & Tools } Tasks and select a task } View.
To set when reminders should sound
1. } Organiser & Tools } Tasks and select a task } More } Reminders.
2. } Always if you want the reminder to sound even though the phone is turned off.
When the reminder sounds } Yes to read the task, or to call the phone number in
a phone task. } No to turn off the reminder. A reminders option set in tasks affects
a reminders option set in the calendar.
Exchanging tasks
You can send and receive tasks using one of the available transfer methods. You can
To send a task
1. In the list of tasks for a certain day, select the item you want to send } More } Send.
2. Select a transfer method.
134
This is the Internet version of the user's guide. © Print only for private use.
8.3
More useful features
Alarm clock
The alarm can be set to ring at a specific time within 24 hours, or recurrently at a
specific time on several days. You can have both these alarms set at the same time.
The alarm signal rings even if the phone is set to silent or turned off. The alarm can
use the radio as an alarm signal.
To set an alarm
} Organiser & Tools } Alarms } Alarm and enter the time } Save.
Using the alarm
• To change the alarm time } Organiser & Tools } Alarms } Alarm and enter
a new time.
• To turn the alarm signal off when it rings, press any key (if radio is selected as alarm
signal } Snooze). If you do not want the alarm to be repeated } Turn off.
• To cancel the alarm } Organiser & Tools } Alarms } Alarm } Turn off.
• To set a recurrent alarm } Organiser & Tools } Alarms } Recurrent alarm.
Enter the time } Continue and select the days that you want the alarm to recur
on by scrolling and pressing Mark. } Done to exit the menu.
• To select an alarm signal } Organiser & Tools } Alarms } Alarm signal. Select
Radio or Sounds.
Note:
If you choose Radio as the alarm signal, please make sure that the handsfree
is connected to the phone.
135
This is the Internet version of the user's guide. © Print only for private use.
Notes
If you need to remember something, you can make a note of it in your phone.
To add a note
} Organiser & Tools } Notes } New note } Add and enter the note } Save.
To handle notes
1. } Organiser & Tools } Notes and a list of notes appears.
2. Select the note that you want to handle. } More to edit, show a note in standby
(or hide it), send or delete a note.
Exchanging notes
You can send and receive notes using one of the available transfer methods.
To send a note
} Organiser & Tools } Notes and select the note that you want to send } More
} Send and select a transfer method.
Stopwatch
Your phone has a stopwatch that can save several laps. The stopwatch continues
to run when you answer an incoming call.
To use the stopwatch
1. } Organiser & Tools } Stopwatch } Start.
2. } Stop or } New lap if you want a lap time.
3. To reset the stopwatch } Reset.
136
This is the Internet version of the user's guide. © Print only for private use.
Timer
To set the timer
} Organiser & Tools } Timer and enter the hours, minutes and seconds after which
you want the timer to go off. When the signal rings, press any key to turn it off.
Brightness
You can adjust the brightness of the screen.
To set the brightness
} Settings } the Display tab } Brightness. Use
or
to scroll between the tabs.
Start-up menu
When the start-up menu is activated, you can select to listen to music only instead of
using the phone with full functionality. All transmitters of the phone are then turned off
in order not to disturb sensitive equipment, for example, in an aeroplane or in a hospital.
You cannot make or receive any calls, send messages etc. You can use the media
player only.
To activate the start-up menu
1. } Settings } the General tab } Start-up menu.
2. Select Show.
3. Turn off the phone.
4. Turn on the phone. Two options appear.
5. Select Music only to start using the media player. If you want to use the phone with
full functionality, select Start phone.
137
This is the Internet version of the user's guide. © Print only for private use.
To deactivate the start-up menu
1. } Settings } the General tab } Start-up menu.
2. Select Don’t show.
Note:
If you have selected Music only, you can still receive calendar and task reminders,
and the alarm signal can still ring.
Calculator
The calculator can add, subtract, divide and multiply.
To use the calculator
} Organiser & Tools } Calculator.
• Press
• Press
• Press
or
to select ÷ x - + . % =.
to delete the figure.
to enter a decimal point.
Code memo
Instead of having to remember security codes for credit cards, for example, you can
save them in the code memo in your phone. All you need to remember is the passcode
to open the code memo.
Checkword and security
To confirm that you have entered the correct passcode for the code memo and
to prevent unauthorized access to your codes, you must enter a checkword.
When you enter your passcode to open the code memo, the checkword is shown for
a short time. If the passcode is correct, the correct codes are shown. If you enter the
incorrect passcode, the checkword and the codes that are shown are also incorrect.
138
This is the Internet version of the user's guide. © Print only for private use.
To open code memo for the first time
1. } Organiser & Tools } Code memo. A message with instructions is displayed
} Continue.
2. Enter a four-digit passcode to open code memo } Continue.
3. Re-enter the new passcode to confirm.
4. Enter a checkword (maximum 15 characters) } Done. The checkword can consist
of both letters and numbers.
To add a new code
1. } Organiser & Tools } Code memo and enter your passcode } New code } Add.
2. Enter a name associated with the code, } Continue.
3. Enter the code } Done.
To change the passcode
1. } Organiser & Tools } Code memo and enter your passcode } More
} Change passcode.
2. Enter your new passcode } Continue.
3. Re-enter the new passcode } Continue.
4. Enter a checkword } Done.
Forgot your passcode?
If you forget your passcode, you must reset the code memo.
To reset code memo
1. Enter any passcode to access the code memo function. The checkword and codes
that are then shown are incorrect.
2. } Organiser & Tools } Code memo } More } Reset.
3. Reset code memo? is displayed } Yes. The code memo is reset and all entries are
cleared. The next time you enter the code memo, you must start by opening the code
memo for the first time.
139
This is the Internet version of the user's guide. © Print only for private use.
140
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
This chapter offers solutions to problems that you might
encounter while using your phone. Some problems require
that you call your service provider, but most of the problems
you can easily correct yourself.
However, if you need to hand in your phone for repair, please
note that you may lose information and content that you have
saved in your phone. You are advised to make a copy of such
information before handing your phone in for repair.
141
This is the Internet version of the user's guide. © Print only for private use.
Master reset
9.1
The changes that you have made to settings and the content that you have added
or edited, will be deleted.
• If you select } Reset settings, the changes that you have made to settings will
be deleted.
• If you select } Reset all, in addition to your changes to settings, all contacts,
messages, personal data, and content that you have downloaded, received or edited
will also be deleted.
To reset the phone
1. } Settings } the General tab } Master reset.
2. } Reset settings or } Reset all.
3. } Yes to continue.
4. Enter the phone lock code (0000 or the new code if you have changed it) } OK.
Note:
If you select Reset all, content such as melodies and pictures that you have
downloaded, received or edited is also deleted.
142
This is the Internet version of the user's guide. © Print only for private use.
9.2
Error messages
Insert SIM
Possible cause: There is no SIM card in the phone or you may have inserted
it incorrectly.
Possible cause: The SIM card connectors need cleaning.
Solution: Remove the SIM card and clean it. Also check that the card is not damaged
in a way that may prevent connection to the phone connectors. In that case, contact
your network operator for a new SIM card.
Insert correct SIM card
Possible cause: The phone is set to work only with certain SIM cards.
Solution: Check if you are using the correct operator SIM card for your phone.
Wrong PIN/Wrong PIN2
Possible cause: You have entered your PIN or PIN2 incorrectly.
PIN blocked/PIN2 blocked
Possible cause: You have entered your PIN or PIN2 code incorrectly three times
in a row.
143
This is the Internet version of the user's guide. © Print only for private use.
Codes do not match
Possible cause: The two codes that you have entered do not match.
Solution: When you want to change a security code (for example your PIN) you have to
No netw. coverage
Possible cause: Your phone is not receiving any radio signal, or the received signal
is too weak.
Solution: Contact your network operator and make sure that the network has coverage
where you are. If so, try to do a new search.
Possible cause: The SIM card is not working properly.
Solution: Insert your SIM card in another phone. If you still get the same or a similar
message, please contact your network operator.
Possible cause: The phone is not working properly.
Solution: Insert your SIM card in another phone. If this works, it is probably the phone
that is causing the problem. Please contact the nearest Sony Ericsson service location.
Emerg. calls only
Possible cause: You are within range of a network, but you are not allowed to use it.
However, in an emergency, some network operators allow you to call the international
emergency number 112.
Solution: You have to move to get a signal that is strong enough. Contact your network
144
This is the Internet version of the user's guide. © Print only for private use.
Phone locked
Possible cause: The phone is locked.
Phone lock code:
Possible cause: The phone lock code is required.
Solution: Enter the phone lock code. Your phone comes with the default phone lock
PUK blocked
Possible cause: You entered your personal unblocking key code (PUK) incorrectly
10 times in a row.
Solution: Contact your network operator.
Charging, alien battery
Possible cause: The battery that you are using is not a battery approved by
Sony Ericsson.
145
This is the Internet version of the user's guide. © Print only for private use.
Troubleshooting
9.3
I have problems with memory capacity or the phone working slowly
Possible cause: The phone memory is full or the memory contents are not properly
organized.
Solution: Restart your phone every day to free memory and increase the capacity
of your phone.
You also have the option to do a Master reset. Some of your personal data and
No battery icon appears when I start charging the phone
Possible cause: The battery is empty or has not been used for a long time.
Solution: It may take up to 30 minutes before the battery icon appears on the screen.
Some menu options appear in grey
Possible cause: Grey text indicates a function that is temporarily unavailable. A service
is not activated or your subscription does not support the function.
Solution: Contact your network operator.
Possible cause: Since you cannot send themes, pictures and sounds that are copyright-
protected, the Send menu is sometimes unavailable.
I do not understand the language in menus
Possible cause: The wrong language is set in the phone.
146
This is the Internet version of the user's guide. © Print only for private use.
I cannot turn on the phone
Possible cause: The battery is discharged.
Solution: Make sure you attached the charger correctly. Turn the phone on with the
charger attached. If the phone starts, restart the phone with no charger attached.
I cannot charge the phone or battery capacity is low
Possible cause: The charger is not properly connected to the phone.
Solution: Make sure that the charger connector clicks properly into place when
connected. The battery icon flashes when charging is in progress, and stops when
Possible cause: The battery connection is bad.
Solution: Remove the battery and clean the connectors. You can use a soft brush, cloth
or q-tip, soaked with alcohol. Make sure that the battery is completely dry before you
put it back. Check that the battery connectors in the phone are undamaged.
Possible cause: The battery is worn out and needs to be replaced.
Solution: Try another battery and charger for the same phone model, or visit your
retailer and ask them to verify if the battery and charger are working properly.
The phone turns itself off
Possible cause: The
button has been pushed unintentionally.
Solution: Turn on the automatic key lock, or lock the keypad manually,
147
This is the Internet version of the user's guide. © Print only for private use.
Possible cause: The battery connection is bad.
I cannot use SMS/text messages on my phone
Possible cause: Settings are missing or incorrect.
Solution: Contact your network operator to find out the correct SMS service centre
I cannot use MMS/picture messages on my phone
Possible cause: Your subscription does not include data capability.
Solution: Please contact your network operator.
Possible cause: Settings are missing or incorrect.
I cannot use the Internet/WAP
Possible cause: Your subscription does not include data capability.
Solution: Please contact your network operator.
Possible cause: Internet settings are missing or incorrect.
148
This is the Internet version of the user's guide. © Print only for private use.
The phone cannot be detected by other users via Bluetooth
Possible cause: You have not turned Bluetooth on.
Solution: Make sure that Bluetooth is turned on and that your phone is visible to other
I have problems synchronizing or transferring data between my phone and my
computer, when using the USB cable that came with the phone
Possible cause: The cable has not been properly detected and installed on your computer.
The software that came with your phone has not been properly installed on the computer.
“Product information” - “Getting started”. The guide “Synchronizing the phone with
a computer” contains installation instructions and a troubleshooting guide, that may
assist you in solving the problem.
149
This is the Internet version of the user's guide. © Print only for private use.
150
This is the Internet version of the user's guide. © Print only for private use.
List of icons shown in standby
10.1
Icon
Description
You have missed an incoming call
Icon
Description
Press
to go to the main menu
All incoming calls are diverted to a defined
number
The 3G (UMTS) network is available
All signals are off, except the alarm and timer
The alarm clock has been set and is on
The timer has been set and is on
Tells you the strength of the GSM network
signal
You are within your home zone
You are in a premium charge zone
Tells you the status of the battery
Tells you that the battery is charging
The stopwatch is working in the background
You have set a reminder for an appointment
You have set a reminder for a task
All phone transmitters are off. You can use the
media player only.
A profile other than Normal has been selected
The magic word is activated
You cannot receive any incoming calls
152
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
Icon
Description
Speakerphone is activated
One or more messages are waiting to be
downloaded from the server
The card or phone lock is on. A secure Internet
connection is established
One or more picture messages are waiting to
be downloaded from the server
You have received a text message
You have received an email message
You have received a picture message
You have received a voice message
You have received an instant message
The infrared port is on
Infrared communication is in progress
Bluetooth port is turned on
Bluetooth headset is connected to your phone
Data is being downloaded to the phone
You have received a message via cell
broadcast
Line 1 is in use for outgoing calls
Line 2 is in use for outgoing calls
You have received a WAP push message
Your phone is receiving a picture message
Your phone is sending a picture message
Ciphering is currently not being provided
by the network
153
This is the Internet version of the user's guide. © Print only for private use.
Icon
Description
An ongoing call
The media player is running
A Java application is running
Your movie can be sent using MMS
Your movie is too large and cannot be sent
using MMS
154
This is the Internet version of the user's guide. © Print only for private use.
codes
E
email
F
G
H
I
K
D
display
157
This is the Internet version of the user's guide. © Print only for private use.
L
multitap text input
language
letters
N
number
locks
M
messages
O
P
passcodes
158
This is the Internet version of the user's guide. © Print only for private use.
PIN code
security
sending
SIM card
sound
R
recording
S
saving
159
This is the Internet version of the user's guide. © Print only for private use.
U
unblocking
T
V
T9™ Text Input
volume
templates
turning on/off
160
This is the Internet version of the user's guide. © Print only for private use.
W
wizard
writing
Z
161
This is the Internet version of the user's guide. © Print only for private use.
162
This is the Internet version of the user's guide. © Print only for private use.
Guidelines for Safe and Efficient Use
12.1
Please read this information before using your mobile phone.
Recommendations
•Always treat your product with care and keep it in a clean and dust-free place.
•Do not expose your product to liquid or moisture or humidity.
•Do not expose your product to extreme high or low temperatures.
•Do not expose your product to open flames or lit tobacco products.
•Do not drop, throw or try to bend your product.
•Do not paint your product.
•Do not use your product near medical equipment without requesting permission.
•Do not use your product when in, or around aircraft, or areas posted “turn off two-way
radio”.
•Do not use your product in an area where a potentially explosive atmosphere exists.
•Do not place your product or install wireless equipment in the area above your car’s air
bag.
•Do not attempt to disassemble your product. Only Sony Ericsson authorised personnel
should perform service.
164
This is the Internet version of the user's guide. © Print only for private use.
Antenna
Only use an antenna that has been specifically designed by Sony Ericsson for your
mobile phone. Use of unauthorised or modified antennas could damage your mobile
phone and may violate regulations, causing loss of performance and SAR levels above
the recommended limits (see below).
Efficient use
Hold your mobile phone as you would any other phone. Do not cover the top of the
phone when in use, as this affects call quality and may cause the phone to operate
at a higher power level than needed, thus shortening talk and standby times.
Radio frequency (RF) exposure and SAR
Your mobile phone is a low-power radio transmitter and receiver. When it is turned on,
it emits low levels of radio frequency energy (also known as radio waves or radio
frequency fields).
Governments around the world have adopted comprehensive international safety
guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission
on Non-Ionizing Radiation Protection) and IEEE (The Institute of Electrical and Electronics
Engineers Inc.), through periodic and thorough evaluation of scientific studies. These
guidelines establish permitted levels of radio wave exposure for the general population.
The levels include a safety margin designed to assure the safety of all persons, regardless
of age and health, and to account for any variations in measurements.
Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio
frequency energy absorbed by the body when using a mobile phone. The SAR value
is determined at the highest certified power level in laboratory conditions, but the actual
SAR level of the mobile phone while operating can be well below this value. This is
because the mobile phone is designed to use the minimum power required to reach
the network.
165
This is the Internet version of the user's guide. © Print only for private use.
Variations in SAR below the radio frequency exposure guidelines do not mean that there
are variations in safety. While there may be differences in SAR levels among mobile
phones, all Sony Ericsson mobile phone models are designed to meet radio frequency
exposure guidelines.
A separate leaflet with SAR information for this mobile phone model is included with
the material that comes with this mobile phone. This information can also be found,
together with more information on radio frequency exposure and SAR, on:
Driving
Please check if local laws and regulations restrict the use of mobile phones while
driving or require drivers to use handsfree solutions. We recommend that you use only
Sony Ericsson handsfree solutions intended for use with your product. Please note that
because of possible interference to electronic equipment, some vehicle manufacturers
forbid the use of mobile phones in their vehicles unless a handsfree kit with an external
antenna supports the installation.
Always give full attention to driving and pull off the road and park before making
or answering a call if driving conditions so require.
Personal medical devices
Mobile phones may affect the operation of cardiac pacemakers and other implanted
equipment. Please avoid placing the mobile phone over the pacemaker, e.g. in your
breast pocket. When using the mobile phone, place it at the ear opposite the pacemaker.
If a minimum distance of 15 cm (6 inches) is kept between the mobile phone and the
pacemaker, the risk of interference is limited. If you have any reason to suspect that
interference is taking place, immediately turn off your mobile phone. Contact your
cardiologist for more information.
For other medical devices, please consult the manufacturer of the device.
166
This is the Internet version of the user's guide. © Print only for private use.
CHILDREN
DO NOT ALLOW CHILDREN TO PLAY WITH YOUR MOBILE PHONE OR ITS ACCESSORIES.
THEY COULD HURT THEMSELVES OR OTHERS, OR COULD ACCIDENTALLY DAMAGE THE
MOBILE PHONE OR ACCESSORY. YOUR MOBILE PHONE OR ITS ACCESSORY MAY CONTAIN
SMALL PARTS THAT COULD BE DETACHED AND CREATE A CHOKING HAZARD.
Disposal of old electrical & electronic equipment
This symbol on the product or on its packaging indicates that this product shall not be
treated as household waste. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste
handling of this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the
product.
Power supply
Connect the AC power adapter only to designated power sources as marked on the
product. Make sure the cord is positioned so that it will not be subjected to damage
or stress. To reduce risk of electric shock, unplug the unit from any power source before
attempting to clean it. The AC power adapter must not be used outdoors or in damp
areas. Never alter the cord or plug. If the plug will not fit into the outlet, have a proper
outlet installed by a qualified electrician.
167
This is the Internet version of the user's guide. © Print only for private use.
Emergency calls
Mobile phones operate using radio signals, which cannot guarantee connection under
all conditions. Therefore you should never rely solely upon any mobile phone for essential
communications (e.g. medical emergencies).
Emergency calls may not be possible on all cellular networks or when certain network
services and/or mobile phone features are in use. Check with your local service provider.
Battery use and care
We recommend that you fully charge the battery before you use your mobile phone for
the first time. The battery can only be charged in temperatures between +5°C (+41°F)
and +45°C (+113°F).
A new battery or one that has not been used for a long time could have reduced capacity
the first few times it is used.
The talk and standby times depend on the actual transmission conditions when using
the mobile phone. If the mobile phone is used near a base station, less power is required
and talk and standby times are prolonged.
• Warning! May explode if disposed of in fire.
• Use only Sony Ericsson branded original batteries and chargers intended for use with
your mobile phone. Other chargers may not charge sufficiently or may produce excessive
heat. Using other batteries and chargers could be dangerous.
• Do not expose the battery to liquid.
• Do not let the metal contacts on the battery touch another metal object. This could
short-circuit and damage the battery.
168
This is the Internet version of the user's guide. © Print only for private use.
• Do not disassemble or modify the battery.
• Do not expose the battery to extreme temperatures, never above +60°C (+140°F).
For maximum battery capacity, use the battery in room temperature.
• Turn off your mobile phone before removing the battery.
• Keep out of children’s reach.
• Use the battery for the intended purpose only.
• Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic
if swallowed.
Disposing of the battery
Please check local regulations for disposal of batteries or call your local Sony Ericsson
Call Center for information.
The battery should never be placed in municipal waste. Use a battery disposal facility
if available.
169
This is the Internet version of the user's guide. © Print only for private use.
Limited Warranty
12.2
Sony Ericsson Mobile Communications AB, S-221 88 Lund, Sweden, (Sony Ericsson),
provides this Limited Warranty for your mobile phone and original accessory delivered
with your mobile phone (hereinafter referred to as “Product”).
Should your Product need warranty service, please return it to the dealer from whom
it was purchased, or contact your local Sony Ericsson Call Center (national rates may
OUR WARRANTY
Subject to the conditions of this Limited Warranty, Sony Ericsson warrants this Product
to be free from defects in design, material and workmanship at the time of its original
purchase by a consumer, and for a subsequent period of one (1) year.
WHAT WE WILL DO
If, during the warranty period, this Product fails to operate under normal use and service,
due to defects in design, materials or workmanship, Sony Ericsson authorised distributors
or service partners, in the country/region* where you purchased the Product, will, at
their option, either repair or replace the Product in accordance with the terms and
conditions stipulated herein.
Sony Ericsson and its service partners reserve the right to charge a handling fee if a
returned Product is found not to be under warranty according to the conditions below.
Please note that some of your personal settings, downloads or other information may be
lost when your Sony Ericsson Product is repaired or replaced. At present Sony Ericsson
may be prevented by applicable law, other regulation or technical restrictions from making
a backup copy of certain downloads. Sony Ericsson does not take any responsibility for
170
This is the Internet version of the user's guide. © Print only for private use.
any lost information of any kind and will not reimburse you for any such loss. You should
always make backup copies of all the information stored on your Sony Ericsson Product
such as downloads, calendar and contacts before handing in your Sony Ericsson Product
for repair or replacement.
CONDITIONS
1. The warranty is valid only if the original proof of purchase issued to the original
purchaser by an, for this Product, Sony Ericsson authorised dealer, specifying the date
of purchase and serial number**, is presented with the Product to be repaired or replaced.
Sony Ericsson reserves the right to refuse warranty service if this information has been
removed or changed after the original purchase of the Product from the dealer.
2. If Sony Ericsson repairs or replaces the Product, the repaired or replaced Product
shall be warranted for the remaining time of the original warranty period or for ninety
(90) days from the date of repair, whichever is longer. Repair or replacement may
involve the use of functionally equivalent reconditioned units. Replaced parts or
components will become the property of Sony Ericsson.
3. This warranty does not cover any failure of the Product due to normal wear and tear,
or due to misuse, including but not limited to use in other than the normal and customary
manner, in accordance with the Sony Ericsson instructions for use and maintenance of
the Product. Nor does this warranty cover any failure of the Product due to accident,
software or hardware modification or adjustment, acts of God or damage resulting from
liquid.
A rechargeable battery can be charged and discharged hundreds of times. However,
it will eventually wear out – this is not a defect. When the talk-time or standby time
is noticeably shorter, it is time to replace your battery. Sony Ericsson recommends that
you use only batteries and chargers approved by Sony Ericsson.
171
This is the Internet version of the user's guide. © Print only for private use.
Minor variations in display brightness and colour may occur between phones. There
may be tiny bright or dark dots on the display. These are called defective pixels and
occur when individual dots have malfunctioned and can not be adjusted. Two defective
pixels are deemed acceptable.
Minor variations in camera image appearance may occur between phones. This is
nothing uncommon and is not regarded as a defective camera module.
4. Since the cellular system on which the Product is to operate is provided by a carrier
independent from Sony Ericsson, Sony Ericsson will not be responsible for the operation,
availability, coverage, services or range of that system.
5. This warranty does not cover Product failures caused by installations, modifications,
or repair or opening of the Product performed by a non-Sony Ericsson authorised person.
6. The warranty does not cover Product failures which have been caused by use of
accessories or other peripheral devices which are not Sony Ericsson branded original
accessories intended for use with the Product.
7. Tampering with any of the seals on the Product will void the warranty.
8. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER
THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY. IN NO EVENT SHALL SONY ERICSSON OR ITS LICENSORS BE LIABLE
FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER,
INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS; TO THE
FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW.
172
This is the Internet version of the user's guide. © Print only for private use.
Some countries/states do not allow the exclusion or limitation of incidental
or consequential damages, or limitation of the duration of implied warranties,
so the preceding limitations or exclusions may not apply to you.
The warranty provided does not affect the consumer's statutory rights under applicable
legislation in force, nor the consumer’s rights against the dealer arising from their sales
/ purchase contract.
*EUROPEAN UNION (EU)
If you have purchased your Product in an EU country you can have your Product serviced,
under the conditions set out above, within the warranty period in any EU country where
an identical Product is sold by an authorised Sony Ericsson distributor. To find out if your
Product is sold in the EU country you are in, please call the local Sony Ericsson Call Center.
Please observe that certain services may not be possible elsewhere than in the country
of original purchase, for example due to the fact that your Product may have an interior
or exterior which is different from equivalent models sold in other EU countries. It may
not be possible to repair SIM-locked Products.
** In some countries/regions additional information is requested. If so, this is clearly
shown on the valid proof of purchase.
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
173
This is the Internet version of the user's guide. © Print only for private use.
Declaration of Conformity
12.3
We, Sony Ericsson Mobile Communications AB of
Nya Vattentornet
S-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony Ericsson type AAD-3021022-BV
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards 3GPP TS 51.010-1, 3GPP TS 34.121,
EN 301489-7, EN 301489-24, EN 300328, EN 301489-17 and EN 60950,
following the provisions of Radio Equipment and Telecommunication Terminal
Equipment directive 99/5/EC with requirements covering EMC directive 89/336/EEC,
and Low Voltage directive 73/23/EEC.
Lund, April 2005
0682
Hiroshi Yoshioka, Head of Product Business Unit GSM/UMTS
We fulfil the requirements of the R&TTE Directive (99/5/EC).
174
This is the Internet version of the user's guide. © Print only for private use.
|