* Some of the contents in this manual may differ from your
phone, depending on the software installed or your
service provider.
DUAL BAND
GPRS TELEPHONE
SGH-E100A
ELECTRONICS
Printed in Korea
World Wide Web
Code No.: GH68-04739A
English. 1/2004. Rev.1.0
Contents
Important Safety Precautions ...................... 7
Unpacking.................................................... 9
Your Phone ................................................ 10
Phone Layout.................................................... 10
Main Display ..................................................... 13
External Display ................................................ 16
Service Light..................................................... 16
Getting Started .......................................... 17
Inserting/Removing the SIM Card........................ 17
Installing/Removing/Charging the Battery............. 18
Switching the Phone On or Off............................. 22
Selecting Functions and Options .......................... 23
Call Functions ............................................ 25
Making a Call .................................................... 25
Ending a Call..................................................... 28
Answering a Call................................................ 28
Rejecting a Call ................................................. 28
Adjusting the Volume......................................... 29
Accessing Options During a Call........................... 30
Using the Ear-microphone................................... 37
Entering Text ............................................. 38
Changing the Text Input Mode ............................ 39
Using Chinese Pinyin Mode.................................. 40
Using Chinese Stroke Modes ............................... 42
Using Quick English Mode ................................... 44
Using English Mode............................................ 46
Using Number Mode........................................... 48
Using Symbolic Mode ......................................... 48
Using the Menus......................................... 49
Accessing a Menu Function ................................. 49
List of Menu Functions........................................ 50
3
Contents
Contents
Phonebook Menu........................................ 56
Phone Settings......................................... 100
Find Name (Phonebook 1.1) ................................... 56
Add Entry (Phonebook 1.2) .................................... 59
Speed List (Phonebook 1.3).................................... 60
Copy All to Phone (Phonebook 1.4) ......................... 62
Send All Via Infrared (Phonebook 1.5) .................... 62
Delete All (Phonebook 1.6)..................................... 64
Own Number (Phonebook 2.1)................................ 65
Group Setting (Phonebook 2.2)............................... 66
Memory Status (Phonebook 2.3)............................. 67
Service Directory (Phonebook 3.1).......................... 67
Greeting Message (Menu 4.1) ............................... 100
Display (Menu 4.2)............................................... 101
Language (Menu 4.3) ........................................... 102
Security (Menu 4.4).............................................. 102
Auto Redial (Menu 4.5)......................................... 106
Side Key (Menu 4.6)............................................. 106
Fax Mode (Menu 4.7)............................................ 106
Infrared Activation (Menu 4.8) .............................. 107
Service Light (Menu 4.9)....................................... 108
Active Folder (Menu 4.10)..................................... 108
Reset Settings (Menu 4.11)................................... 108
Messages ................................................... 68
Organiser................................................. 109
Short Message (Menu 1.1) ..................................... 68
Multimedia Message (Menu 1.2) ............................. 74
Voice Mail (Menu 1.3)............................................ 85
Preset Messages (Menu 1.4) .................................. 86
Broadcast (Menu 1.5) ............................................ 86
Settings (Menu 1.6)............................................... 88
Memory Status (Menu 1.7) .................................... 91
New Memo (Menu 5.1) ......................................... 109
Calendar (Menu 5.2)............................................. 111
To Do List (Menu 5.3)........................................... 114
Clock (Menu 5.4).................................................. 115
Alarm (Menu 5.5)................................................. 117
Calculator (Menu 5.6)........................................... 119
Conversion (Menu 5.7) ......................................... 120
Timer (Menu 5.8) ................................................. 121
Stopwatch (Menu 5.9) .......................................... 122
Call Records ............................................... 92
Missed Calls (Menu 2.1)......................................... 92
Received Calls (Menu 2.2)...................................... 92
Dialled Calls (Menu 2.3)......................................... 93
Delete All (Menu 2.4)............................................. 93
Call Time (Menu 2.5)............................................. 94
Call Costs (Menu 2.6) ............................................ 94
Network Services..................................... 123
Call Diverting (Menu 6.1)...................................... 123
Call Barring (Menu 6.2)......................................... 125
Call Waiting (Menu 6.3) ........................................ 128
Network Selection (Menu 6.4) ............................... 129
Caller ID (Menu 6.5)............................................. 130
Active Line (Menu 6.6).......................................... 130
Sound Settings........................................... 96
Incoming Calls (Menu 3.1)..................................... 96
Messages (Menu 3.2)............................................. 97
Power On/Off (Menu 3.3)....................................... 98
Connection Tone (Menu 3.4) .................................. 98
Key Tone (Menu 3.5)............................................. 98
Minute Minder (Menu 3.6)...................................... 99
Quiet Mode (Menu 3.7).......................................... 99
Fun Box.................................................... 131
WWW Services (Menu 7.1).................................... 131
Media box (Menu 7.2)........................................... 138
5
4
Contents
JAVA World (Menu 7.3)......................................... 140
Using ALS (Alternate Line Service) .......... 144
Solving Problems ..................................... 146
Access Codes ........................................... 149
Phone Password ............................................... 149
PIN................................................................. 149
PIN2............................................................... 150
PUK................................................................ 150
PUK2 .............................................................. 151
Call Barring password ....................................... 151
Health and Safety Information................. 152
Exposure to Radio-Frequency Energy
(SAR Information) ............................................ 152
Precautions When Using Batteries....................... 153
Road Safety..................................................... 155
Operating Environment ..................................... 157
Electronic Devices............................................. 157
Potentially Explosive Atmospheres ...................... 159
Emergency Calls............................................... 160
Other Important Safety Information.................... 161
Care and Maintenance....................................... 161
Glossary................................................... 163
Quick Reference Card............................... 167
6
Important Safety
Precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road Safety at All Times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching Off When Refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching Off in Aircraft
Wireless phones can cause interference. Using them
in aircraft is both illegal and dangerous.
Switching Off in Hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special Regulations
Meet any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important Safety Precautions
Sensible Use
Unpacking
Your package contains the following items:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on, especially the phone is in
service.
Emergency Call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
Travel Adapter
Hand Strap
Phone
then press the
key. If certain features are in
use, deactivate those features before you can make
an emergency call. Give all the necessary
information as accurately as possible. Do not cut off
the call until given permission to do so.
Battery
Water Resistance
Your phone is not water-resistant. Keep it dry.
Accessories and Batteries
Use only Samsung-approved accessories and
batteries.
Wearable
Ear-Microphone
Owner’s Manual
Qualified Service
Note: The items supplied with your phone may be
Only qualified service personnel may install or
repair your phone.
different depending on the country.
In addition, you can obtain the following
accessories for your phone from your local
Samsung dealer:
For more detailed safety information, see “Health
and Safety Information” on page 152.
• Battery charger
• Simple hands-free kit
• Cigarette lighter adapter
• Data kit
8
9
Your Phone
Your Phone
Closed View
Ear-microphone
jack
Antenna
Phone Layout
Service light
The following illustrations show the main elements
of your phone:
External
display
Open View
IrDA port
Earpiece
Key(s)
Description
Folder
Main display
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
Service light
In Menu Mode, scroll through the menu
options and Phonebook memory.
Navigation keys
(Up/Down/Left/
Right)
Soft key (left)
In Idle Mode, the Left key enters the
New SMS message writing screen, the
Right key enters the Incoming call’s
melody setting menu and the Up key
enters the Calendar menu. The Down
key enters the Java world menu.
Volume/Menu
browse keys
Soft key (right)
WAP Browser
key
Power On/Off /
Menu exit key
Dial/Menu
confirmation key
Alphanumeric
keys
In Idle Mode, launches the WAP
(Wireless Application Protocol) browser
directly.
Cancel/Back/
Correction key
Special
function keys
Microphone
Makes or answers a call.
In Idle Mode, accesses the call log list.
In Menu Mode, selects a menu function
or stores information that you have
entered, such as a name in the phone or
SIM memory.
Charger Connector
10
11
Your Phone
Key(s)
Your Phone
Description (continued)
Main Display
Deletes characters from the display.
When pressed and held in Idle Mode,
quickly accesses the New memo menu.
In Menu Mode, returns to previous
menu.
Main Display Layout
The main display has three areas:
Icons
Ends a call.
When pressed and held, switches the
phone on or off.
In Menu Mode, cancels your input and
returns to Idle Mode.
Text and
graphic area
When pressed and held in Idle Mode,
quickly accesses your voice mail server.
Soft keys
Indications
Menu
Phonebook
Enter numbers, letters and some special
characters.
Area
Description
First line
Displays various icons. See
page 14.
Used for various purposes in different
functions.
When pressed and held while entering a
Middle lines
Display messages, instructions
and any information that you
enter, such as number to be
dialled.
phone number, the
pause.
key enters a
When pressed and held in Idle Mode,
Last line
Shows the functions currently
assigned to the two soft keys.
the
key enters or exits the Quiet
Mode.
(on the left side of the phone)
During a call, adjust the earpiece
volume.
In Idle Mode with the phone open,
adjust the key tone volume.
When pressed and held at an incoming
call with the folder closed, reject the call
or silence the ring tone. See page 106.
12
13
Your Phone
Your Phone
Icons
Icon Description (continued)
Icon Description
Appears when the Call diverting feature is
activated.When your SIM card supports
ALS (Alternate Line Service), this icon
may appears with the number 1, 2, or
Shows the received signal strength. The
more the number of bars, the stronger
the signal.
both. For example
,
,
.
Appears when a call is in progress. When
your SIM card supports ALS (Alternate
Line Service), this icon may appears with
the number 1, 2, or both.
Appears when you are connected to the
GPRS network.
Appears when you are at the home zone.
(This icon may be shown only if your service
For example
,
,
.
provider supports this.)
Appears when you are out of a service
area. When it displays, you cannot make
or receive a call.
Appears when your are at the office zone.
(This icon may be shown only if your service
provider supports this.)
Appears when you have new or
Appears when you set the alert type for
incoming calls to Vibration or Vibration
then melody. For further details, see
page 97.
unchecked voice messages. When you
SIM card supports ALS (Alternate Line
Service), this icon may appears like
,
,
.
Appears when the Quiet Mode is active.
Appears when you have new or unread
messages.
Shows the level of your battery. The more
bars you see, the more power you have
left.
Appears when you have new or
unchecked multimedia messages.
Appears when you are retrieving a
multimedia message.
Backlight On Mode
The displays and the keypad are illuminated by a
backlight. When you press any key or open the
folder, the backlight illuminates. It turns off if no
key is pressed within a given period of time,
depending on the Backlight menu option. See
page 102 for further details.
Appears when you set the alarm(s) to ring
at a specified time.
Appears when the IrDA port is active. For
details, see page 107.
Appears when you connect the phone to
the computer by the IrDA port.
Note: The backlight remains on at all times when the
phone is connected to an optional car kit.
14
15
Your Phone
Dimming Mode
Getting Started
If no key is pressed for given period of time which
you can set in the Backlight menu option (Menu
4.2.3), the backlight turns to dim to save the
power. Press any key to awake it from the Dimming
Mode.
Inserting/Removing the SIM Card
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details, such as your PIN, any optional
services available and so on.
Display Off Mode
If no key is pressed for one minute after the
backlight turns to dim, the display goes into the Off
Mode. Press any key to awake the display from the
Off Mode.
• Keep all miniature SIM cards out of the reach of
small children.
• The SIM card and its data can be easily damaged
by scratches or bending, so be careful when you
are handling, inserting or removing the card.
External Display
• When you are installing the SIM card, always
make sure that the phone is switched off before
you remove the battery.
Your phone has an external display on the folder.
It indicates that you have an incoming call or
message, and notifies you of the specified time
when you set an alarm.
Inserting the SIM Card
When you press an hold one of the volume keys
with the folder closed, the external display’s
backlight illuminates.
1. If necessary, remove the battery by referring to
page 19.
2. Insert and slide the SIM card under the two
tabs, ensuring that the notched corner is top left
and the gold contacts of the card face into the
phone.
When the ear-microphone is connected to the
phone, you can also use the button on it to turn it
on.
Service Light
There are several case in which the service light
flashes.
• When the Service Light menu (Menu 4.9) is set
to On.
• When the incoming call or message alert type is
set to Light only.
16
17
Getting Started
Getting Started
Removing the SIM Card
2. Press the battery against the back of the phone
until it clicks into place.
To remove the SIM card, slide the card out of the
holder, as shown.
Installing/Removing/Charging the
Battery
Removing the Battery
1. Switch off the phone by pressing and holding
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
the
key.
2. To remove the battery, pull the battery catch
toward the top of the phone and hold it in that
position. Lift the battery away from the phone.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
standard battery is fully recharged in
approximately 140 minutes.
Installing the Battery
1. Insert the teeth on the bottom of the battery
into the corresponding slots on the phone.
18
19
Getting Started
Getting Started
3. When charging is finished and the battery icon
becomes solid and “Fully charged” message is
displayed, disconnect the adapter from the
power outlet and from the phone by pressing
the grey tabs on both sides of the connector and
pulling the connector out.
Charging the Battery by Using the Travel
Adapter
Note: The phone can be used while the battery is
being charged, but this causes the battery to
charge more slowly.
1. Plug the connector of the travel adapter into the
jack at the bottom of the phone.
Check that the arrow on the connector is facing
towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor informs you in
the following ways: an empty battery icon flashes
(
), you hear a warning tone and a message
2. Plug the adapter into a standard AC wall outlet.
repeats at regular intervals on the display.
While charging, the battery icon at the top right
corner of the display repeatedly fills to show that
the battery is charging.
When the battery becomes too weak for the phone
to operate, it switches off automatically.
20
21
Getting Started
Getting Started
Switching the Phone On or Off
Selecting Functions and Options
To switch the phone on:
1. Open the folder.
Your phone offers a set of functions that allow you
to customise your phone. These functions are
arranged in menus and sub-menus, accessed via
the two soft keys marked
and sub-menu allows you to view and alter the
settings of a particular function.
and
. Each menu
2. Hold down the
switches on.
key until the phone
3. If the phone asks for a PIN, enter the PIN and
press the Ok soft key. For further details, see
page 149.
The roles of the soft keys vary according to the
current context; the labels or icons on the bottom
line of the display and just above the soft keys
indicate their current roles.
The phone searches for your network and the
current date and time appear on the display.
After finding it, you can make or receive a call.
Example:
Service Provider
Wed 17 Sep 03
12:53
External Display
Service Provider
Wed 17 Sep 03
12:53
12:53
Wed 17 Sep
Menu Phonebook
Menu
Phonebook
Note: To change the language, use the
Language menu option (Menu 4.3).
For further details, see page 102.
To switch the phone off:
Hold down the
key until the power-off
animation displays.
Press the right soft
key to access the
Phonebook feature.
Press the left soft
key to access the
menu functions.
22
23
Getting Started
Call Functions
To view various functions/options available or select
the one is required:
Making a Call
1. Press the appropriate soft key.
2. To
select the:
Press the
Using the Number Keypad
Select soft key.
When the idle screen is displayed, enter the area
code and phone number, and press the
• function displayed
• option highlighted
key.
Note: If you have set the Auto redial option (Menu
4.5) to On, the number is redialled
view the next function or Down key.
highlight the next option
on a list
automatically up to ten times if the person you
called does not answer or the line is busy. See
page 106 for further details.
move back to the
previous function or
option on a list
Up key.
Correcting the Number
move back up one level
in the structure
(or Back) soft
key or C key.
To clear
Press the
return to Idle mode
key.
the last digit
displayed
C key.
In some functions, you may be asked for a
password or PIN. Enter the required code and press
the Ok soft key.
any other digit in
the number
Left or Right key until the
cursor (|) is immediately to
the right of the digit to be
cleared and press the C key.
You can also insert a missing
digit simply by pressing the
appropriate key.
the whole digits
displayed
C key and hold it down for
more than one second.
24
25
Call Functions
Call Functions
3. To dial the number, press the
key.
Making an International Call
To view each call record, see “Call Records” on
page 92.
1. Press and hold the 0 key for the international
prefix. The + character appears.
2. Enter the country code, area code and phone
Viewing Missed Calls
number and press the
key.
If you have a subscription that includes the Caller
Line Identification (CLI) feature and you are unable
to answer a call for any reason, you can find out
who was calling you so that you can call the person
back.
Making a Call from Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone’s memory,
which are jointly called the Phonebook. You then do
not need to remember all your numbers; simply
select the required name to recall the associated
number.
The number of missed calls displays on the idle
screen immediately after a call was missed.
To view the missed calls immediately:
1. If the folder is closed, open it.
For further details about the Phonebook feature,
see page 56.
2. Press the Missed soft key.
Using the Call Logs
The list of the missed calls displays.
The phone stores up to 20 calls dialled, received or
missed chronologically. The last call is saved in the
first position. If the same number occurs more than
once, only the latest occurrence is saved.
3. If necessary, scroll to the number you want by
pressing the Up or Down key.
4. To dial the number, press the
key.
To recall any of these numbers:
To use the missed call options, see “Missed Calls”
on page 92.
1. Press the
log list.
key in Idle Mode to access the Call
Note: To clear the new message notification on the
display, press the
key. When you also
2. Use the Up and Down keys to scroll through the
list until the number you want highlights.
have missed calls, voice mails, short messages
or multimedia messages, and multi CBs, the
right soft key indication changes in the
following order: Missed, Connect, View, CB,
and Phonebook
The call logs are listed with the following icons:
•
•
•
: Dialled calls
: Received calls
: Missed calls
26
27
Call Functions
Call Functions
Speed-dialling from Phonebook
Adjusting the Volume
Once you have stored numbers in Phonebook, you
can dial a number simply by pressing one or two
keys. For further details, see page 60.
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone.
Press the
key to increase the volume level and
the key to decrease it.
Ending a Call
When you want to finish your call, briefly press the
key or close the folder.
Answering a Call
When somebody calls you, the phone rings and
displays the incoming call animation.
If the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook,
displays.
When you hear a sound, such as ringtone, you can
also adjust the earpiece volume. But it is not fixed.
To answer a call, open the folder. If it is already
In Idle Mode with the folder open, you can adjust
open, press the
key or Accept soft key.
the key tone volume using the
and
keys.
Note: You can answer a call while using Phonebook or
Note: When a call comes in, you can reject the call or
mute the call ringer by pressing and holding
one of the volume keys, depending on your
setting of the Side key menu option (Menu
4.6). For further details, see page 106.
menu features. The current operation stops.
Rejecting a Call
To reject an incoming call, press the
key or
Reject soft key.
If the Side key option is set to Reject, you can
press and hold one of the volume keys on the left
side of the phone to reject an incoming call; see
page 106.
28
29
Call Functions
Call Functions
To communicate with answering machines or
computerised telephone systems, the Send keys
Accessing Options During a Call
option must be selected.
Your phone provides a number of control functions
that you can use during a call.
Sending DTMF Tones
Switching the Microphone Off (Mute)
You can send the DTMF (Dual Tone Multi-
Frequency) tones of the number on the display
during a call.
You can temporarily switch your phone’s
microphone off so that the other person cannot
hear you.
This option is helpful for entering a password or
account number when you call an automated
system, like a banking service.
Example: You may wish to say something to
another person in the room but do not
want the calling person to hear you.
To send the DTMF tones:
1. Press the Options soft key.
1. When you are connected to the teleservice
system, press the Options soft key.
2. When Mute highlights, press the Select soft
key.
2. Press the Down key to highlight the Send DTMF
option.
The Mute icon (
) appears on the bottom line
of the display and your correspondent can no
longer hear you.
3. Press the OK soft key.
4. Enter the number you want to send and press
the OK soft key.
To switch the microphone back on:
1. Press the Options soft key.
The tones of the displayed number are sent.
2. When Unmute highlights, press the Select soft
key.
Putting a Call on Hold
The Mute icon disappears and your
correspondent can hear you.
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can switch between the
calls.
Muting/Sending Key Tones
You can turn the key tones off or on during a call.
When the Mute keys option is selected, your phone
does not transmit the key tones. It allows you to
press keys without hearing annoying key tones
during a call.
To place a call on hold, simply press the Hold soft
key. You can reactivate the call whenever you want
by pressing the Retrieve soft key.
30
31
Call Functions
Call Functions
To make a call while you have a call in progress:
2. To switch between the two calls, press the Swap
soft key.
1. Enter the phone number that you want to dial or
look it up in Phonebook.
3. To end the call on hold, press the Options soft
key and select the End held call option.
2. Press the
key to dial the second call.
To end the current call, press the
key.
The first call is automatically put on hold.
The call on hold is automatically reconnected to
you.
Or alternatively:
1. Put the current call on hold by pressing the Hold
Transferring a Call
soft key.
You can transfer the current call to the call on hold
if this service is supported by the network, so that
the callers can talk to each other. You are
disconnected from both of them.
2. Make the second call in the normal way.
To switch between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other person.
1. During a call, answer or make a call in the
normal way, and press the Options soft key.
2. Press the Up or Down key to select the Transfer
To end the call on hold, press the Options soft key
and select the End held call option.
option and press the Select soft key.
The two people are connected to each other.
When you want to finish, end each call normally by
pressing the
key.
Searching for a Number in Phonebook
Answering a Second Call
You can search for a number in your Phonebook
during a call.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have activated the Call waiting
option (see page 128). You will be notified of an
incoming call by a call waiting tone.
1. Press the Options soft key.
2. If necessary, press the Up or Down key to
highlight the Phonebook option. Press the
Select soft key.
To answer a call while you have another call in
progress:
3. Select the Find name option and press the
Select soft key.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
The Phonebook entries are listed.
32
33
Call Functions
Call Functions
4. Enter the first a few letters of the name that you
want to find. The Phonebook entries are listed
starting with the first entry matching your input.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
Note: You can also scroll through Phonebook from
the beginning, by pressing the Up or Down
key
.
3. To join the first participant to the multi-party
call, press the Options soft key and select the
Join option. Press the Select soft key.
5. To view the highlighted entry, press the Ok soft
key.
For further details about the Phonebook feature,
see page 56.
4. To add a new person to the multi-party call, call
the person in the normal way. Then press the
Options soft key and select the Join option.
Press the Select soft key.
Using the Message Service
You can add incoming callers by answering the call
and selecting the Join option. Repeat as needed.
You can read or write a new message during a call.
1. Press the Options soft key.
Having a Second Call During a Multi-party Call
2. Press the Up or Down key to highlight the
To answer or make a call when you have the multi-
party call:
Message option. Press the Select soft key.
3. To read a received message, select the Step
option, and then scroll to the message that you
want to read.
1. To place the multi-party call on hold, press the
Hold soft key.
2. Answer or make a call in the normal way.
To write a new message, select the New
message option.
3. You can reactivate the multi-party call on hold
by pressing the Retrieve soft key.
4. Press the Select soft key.
To end the multi-party call on hold, press the
Options soft key and select the End held
multiparty option.
For further details about the SMS feature, see
page 68.
To answer an incoming call when you have the
multi-party call in progress and the another call on
hold:
Making a Multi-party Call
A multi-party call feature is a network service that
allows up to six people to take part simultaneously
in a multi-party or conference call. For more
information, contact your service provider.
1. Press the Accept soft key.
34
35
Call Functions
Call Functions
2. Select the End held option to end the call on
Using the Ear-microphone
hold.
With the ear-microphone, you can make or answer
a call without holding the phone.
Or, select the End current option to end the call
in progress.
When you connect the ear-microphone to the jack
at the top of the phone, the button on the
ear-microphone works as listed below:
3. Answer the new call by pressing the
key.
Having a Private Conversation With One
Participant
To
Press
1. Press the Options soft key and select the Split
redial the last call
answer a call
the button twice in Idle Mode.
option. Press the Select soft key.
and hold the button when
you receive the call.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
end a call
and hold the button when
you have finished the call.
Now you can talk privately with that person. The
other participants can continue to converse with
each other
3. To return to the multi-party call, press the
Options soft key and select the Join option.
4. Press the Select soft key.
All of the multi-party call participants can now
hear each other.
Removing One Participant
1. Press the Options soft key and select the
Remove option.
2. Press the Up or Down key to highlight a
participant and press the Select soft key.
The call ends with that participant, but you can
continue to talk with the other participants.
3. End the multi-party call by closing the folder or
pressing the
key.
36
37
Entering Text
Entering Text
Changing the Text Input Mode
The phone allows you to enter characters for
messages and names in Chinese and English. To
enter Chinese text, the phone provides several
widely used pronunciation based (Pinyin) and
character shape based (Stroke) input methods to
meet the preferences of different users, allowing for
greater convenience and ease of use
When you are in a field that allows characters to be
entered, you will see the text input mode indicator
at the bottom of the display.
Example: Entering a name in Phonebook
Enter name
You can also enter any combination of Chinese
characters, alphabets, numbers, and special
symbols including punctuation marks
• Pinyin mode
• Chinese Simplified Stroke mode
• Quick English mode (T9 mode)*
• English mode
Text input mode
9
Ok
PY
indicator: Chinese
Pinyin mode
• Chinese Traditional Stroke mode
• Number mode
To change to another text input mode:
1. Press the right soft key indicating the current
text input mode.
• Symbolic mode
• Add word mode
2. Scroll to the mode you want to use by pressing
the Up or Down key.
Directions for using each of the text input modes
appears later in this section.
You can use the Add word option to add new
words into t9 dictionary. see page 44.
Note: If you want to exit the menu without
changing the mode, press the
key.
soft key or
3. Press the Select soft key to confirm the
highlight text input mode.
*
is a registered Trademark of Tegic Communications,
Inc. and is licensed under U.S. Patent 5,818,437/
5,953,541/6,011,554.
Note: If you want to exit the menu without changing
to a new mode, press the right soft key.
4. The selected text input mode indicator appears
at the bottom of the display.
38
39
Entering Text
Entering Text
When the character you are typing appears in
the Character Selection Map, you may select it.
without completing the Pinyin spelling or
entering the tone for the character.
Using Chinese Pinyin Mode
Pinyin is a system to mark Chinese pronunciation in
Latin alphabets. With the pinyin input method, you
can enter Chinese characters by entering the pinyin
string from the phone keypad and the phone
4. To select a character, press the 1 key to activate
the Character Selection Map. A number, 1 to 5,
is added to the beginning of a corresponding
character. With the Character Selection Map
being activated, a normal press on the 1 to 5
key selects the corresponding character.
automatically presents the matching alternatives.
This mode allows you to enter Pinyin characters
with only one key press per letter.
Typing Characters in Pinyin Mode
Enter name
1. Press keys corresponding to the phonetic
spelling, referring to the Roman letters printed
on the keys. Notice that the choices in the
Character Selection Map change.
Example: Typing “
” in Pinyin mode
Press the
to enter “
3
key
.”
Ok
PY
Enter name
Text Area
Notes:
• To insert a space when entering a text, press the
key when the cursor blinks in the Text Area.
Key Stroke Area: press
the 5 and 4 keys to
•
To remove the activate character in the Character
Selection Map, press the key.
enter “li.”
Character Selection Map
C
Ok
PY
Scrolling
To move the cursor left or right through your text
message, press the Left or Right key.
2. If there are more than one pinyin spelling
corresponding to your keypress, press the Left
or Right key to select the spelling you want.
Inserting a Space
3. If you cannot find the character you want from
the display, press the Up or Down key to scroll
through choices in the Character Selection map.
Insert a space between the characters, press the
key in the Text Area.
40
41
Entering Text
Entering Text
Clearing Strokes and Characters
Typing Strokes and Characters in Stroke
Mode
Press the C key or more times to remove strokes to
the left. Once the Pinyin Area is empty, pressing the
C key removes characters from the Text Area.
1. To type a character, press keys corresponding to
its component strokes. Press keys on the
handset in the order that you would write the
strokes, using one press per each stroke.
Using Chinese Stroke Modes
Example: Typing “
” in Chines Traditional
Stroke mode
These modes allow you to enter individual Chinese
strokes, in written order; from top to bottom, and
from left to right. Your phone provides Chinese
Simplified Stroke mode and Chinese Simplified
Stroke mode.
The two modes work similarly, but the characters
that appear on the display.
Press the 5 key to enter
“
to enter “
,”and the.n”the 3 key
Even though there are many different strokes used
to create Chinese characters, the strokes are
classified into 5 basic categories; heng, shu, pie,
dian and zhe. The basic strokes are printed on the
keypad, on the 1 to 5 keys.
9
2. The phone displays your strokes in the Key
Stroke Area and offers character choices in the
Character Selection Map. As you enter strokes,
notice that the choices in the Character
Selection Map change.
To enter a stroke, press the key printed with the
printed with the stroke that most closely represents
the exact stroke you want.
To scroll through choices in the Character
Selection Map, press the Up or Down key.
The table shows the stroke/key relationship:
Note: If you are uncertain of the order of one or
more strokes, press the
6
key in place of
each questionable stroke. Continue entering
strokes until the character is displayed in
the Character Selection Map or until you
have finished the character.
3. When the character you are typing appears in
the Character Selection Map, you may select it
without finishing the stroke sequence for the
character. Characters displayed in the Character
42
43
Entering Text
Entering Text
Selection map correspond to keys 7 to 0 on the
display alternative word choices for the keys
keypad. To select a character from the Character
Selection Map and add it to your message, press
the corresponding key 7 to 0.
that you have pressed.
Example: Both “of” and “me” have the sequence
of 6 and 3. The phone displays the
most commonly used choice first.
Scrolling
4. Insert a space between words by pressing the
key.
To move the cursor left or right through your text
message, press the Left or Right key.
If Spell appears above the left soft key while you
are entering text, the word does not exist in the T9
dictionary. To type words not found in Quick English
mode, change the text input mode to English mode,
or proceed as follows:
Clearing Strokes and Characters
Press the C key one or more times to remove
strokes to the left. Once the Stroke Area is empty,
pressing the C key removes characters from the
Text Area.
1. Press the Spell soft key, or press the right soft
key and select the Add word option.
2. Enter the word you want to add using English
mode (see page 46) and press the Ok soft key.
Using Quick English Mode
The word is saved in the T9 dictionary and
inserted in the input field.
To type a word, press keys corresponding to the
letters you need. Remember the following as you
are typing:
3. Continue entering other words in Quick English
mode.
1. Start entering the word by pressing keys 1 to 0.
Press each key only once for each letter.
Smart Punctuation
Example: To enter “hello” in Quick English
mode, press the 4, 3, 5, 5, and 6
keys.
To enter periods, hyphens or apostrophes, press the
1 key. T9 mode applies rules of grammar to insert
the correct punctuation.
Thewordyouaretypingappearsonthedisplay.
It may change with each key that you press.
Example: The 1 key is used twice to display two
punctuation marks.
2. Enter the whole word before editing or deleting
any keystrokes.
l
e
t
‘
s
e
a
t
.
3. If the word is correct, start entering the next
word. Otherwise, press the 0 key repeatedly to
44
45
Entering Text
Entering Text
Changing the Case
Refer to the table below for more information about
the characters available:
To shift the case of the next letter(s) that you type,
Characters in the Order Displayed
Key
press the
key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
Upper case
Lower case
Scrolling
• To move the cursor to the left or right within the
text, press the Left or Right key.
• To scroll through alternative word choices for the
keys you have entered, press the 0 key.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
Changing the Case
To shift the case of the next letter(s) that you type,
Using English Mode
press the key. There are three cases; Lower
Case, Initial Capital and Capital Lock.
When typing in English mode, press the key labelled
with the required letter:
- Once for the first letter
- Twice for the second letter
- And so on
Inserting a Space
To insert a space between the words, press the
key.
Example: To display the letter “C”, quickly press the
2 key three times. To display the letter
“K”, press the 5 key twice. This method is
called Multi-tap typing.
Scrolling
To move the cursor to the left or right within the
text, press the Left or Right key.
Note: The cursor moves to the right when you press a
different key. When entering the same letter
twice or a different letter on the same key, just
wait a few seconds for the cursor to move to
the right automatically, and then enter the next
letter.
Clearing Letters and Words
Press the C key one or more times to clear letters to
the left. Press and hold the key to clear the display.
46
47
Entering Text
Using the Menus
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Using Number Mode
Number mode enables you to enter numbers in
your text. Press the keys corresponding to the
digits you want to enter.
Accessing a Menu Function
Using Symbolic Mode
The menus and sub-menus can be accessed by
pressing the Menu or Phonebook soft key in Idle
Mode, then scrolling with the navigation keys.
Symbolic mode enables you to enter symbols in
your text.
1. In Idle Mode, press the Menu soft key to access
the main menu or press the Phonebook soft
key to access Phonebook menu.
To
Press the
display more
symbols
Up or Down key.
2. Scroll through the menus using the Left or Right
key.
enter a symbol
corresponding number key.
3. Find the sub-menu that you wish to use by
scrolling with the Up or Down key.
return to the
previous text input
mode
Ok or
soft key.
4. Press the Select soft key to access the sub-
menu.
If the menu that you have selected contains
further sub-menus, repeat steps 3 and 4.
5. Scroll to the option you want to choose with the
Up or Down key.
6. Press the Select soft key to choose the setting.
Note: You can return to the previous menu level by
pressing the
soft key.
You can also access the menus and sub-menus by
quickly entering the corresponding menu number.
48
49
Using the Menus
Using the Menus
Example: To access the Voice mail menu option,
press the Menu soft key, 1, 3 in Idle
Mode.
Main Menu
1. Messages (see page 68)
1.1 Short message
1.1.1 Inbox
1.1.2 New message
1.1.3 Outbox
List of Menu Functions
1.1.4 Delete all
1.2 Multimedia message
1.2.1 Inbox
Various menus let you check or change your phone
settings. The following list shows the menu
structure.
1.2.2 New Message
1.2.3 Outbox
1.2.4 Draft
The numbers assigned to each menu option may
not match the menu number on the phone. It
depends on the services supported by your SIM
card.
1.2.5 My folder
1.2.6 Delete all
1.3 Voice mail
1.3.1 Connect to voice mail
1.3.2 Voice server number
1.4 Preset messages
1.5 Broadcast
1.5.1 Read
Phonebook Menu
1. Phonebook (see page 56)
1.1 Find name
1.2 Add entry
1.3 Speed list
1.5.2 Receive
1.5.3 Channel
1.5.4 Language
1.4 Copy all to phone
1.5 Send all via infrared
1.6 Delete all
1.6 Settings
1.6.1 Short message
1.6.2 Multimedia message
1.7 Memory status
1.7.1 Short message
1.7.2 Multimedia message
2. Management (see page 65)
2.1 Own number
2.2 Group setting
2.3 Memory status
2. Call records (see page 92)
2.1 Missed calls
2.2 Received calls
2.3 Dialled calls
2.4 Delete all
3. Services (see page 67)
3.1 Service directory
50
51
Using the Menus
Using the Menus
2.5 Call time
2.5.1 Last call time
4.4 Security
4.4.1 PIN check
2.5.2 Total sent
4.4.2 Change PIN
4.4.3 Phone lock
4.4.4 Change password
4.4.5 Privacy
2.5.3 Total received
2.5.4 Reset timers
2.6 Call costs*
2.6.1 Last call cost
2.6.2 Total cost
2.6.3 Max cost
4.4.6 SIM lock
4.4.7 FDN mode*
4.4.8 Change PIN2*
2.6.4 Reset counters
2.6.5 Set max cost
2.6.6 Price/Unit
4.5 Auto redial
4.6 Side key
4.7 Fax mode
4.8 Infrared activation
4.9 Service light
4.10 Active Folder
4.11 Reset settings
3. Sound settings (see page 96)
3.1 Incoming calls
3.1.1 Default melodies
3.1.2 My sounds
3.1.3 Ring volume
3.1.4 Alert type
4.11.1 Sound settings
4.11.2 Phone settings
4.11.3 All settings
3.2 Messages
5. Organiser (see page 109)
3.2.1 Short message
3.2.2 Multimedia message
3.3 Power on/off
3.4 Connection tone
3.5 Key tone
5.1 New memo
5.2 Calendar
5.3 To do list
5.4 Clock
3.6 Minute minder
3.7 Quiet mode
5.4.1 Set time
5.4.2 Set date
5.4.3 Set world time
5.4.4 Set format
5.5 Alarm
5.6 Calculator
5.7 Conversion
5.7.1 Length
5.7.2 Weight
5.7.3 Volume
5.7.4 Area
4. Phone settings (see page 100)
4.1 Greeting message
4.2 Display
4.2.1 Wallpaper
4.2.2 Skin
4.2.3 Backlight
4.2.4 LCD brightness
4.3 Language
5.7.5 Temperature
5.8 Timer
5.9 Stopwatch
* Shown only if supported by your SIM card.
* Shown only if it is supported by your SIM card.
52
53
Using the Menus
Using the Menus
7.2 Media box
7.2.1 Images
6. Network services (see page 123)
6.1 Call diverting
7.2.2 Sounds
7.2.3 Delete all
7.2.4 Memory status
6.1.1 Divert always
6.1.2 Busy
6.1.3 No reply
6.1.4 Unreachable
6.1.5 Cancel all
7.3 JAVA world
7.3.1 Downloads
7.3.2 DNS setting
7.3.3 Memory status
6.2 Call barring
6.2.1 All outgoing
6.2.2 International
6.2.3 International except to home
6.2.4 All incoming
6.2.5 Incoming while abroad
6.2.6 Cancel all
8. SIM AT (Application Toolkit)*
6.2.7 Change barring password
6.3 Call waiting
6.4 Network selection
6.5 Caller ID
6.6 Active line*
7. Fun box (see page 131)
7.1 WWW services**
7.1.1 Home
7.1.2 Bookmark
7.1.3 Go to URL
7.1.4 Clear cache
7.1.5 Proxy settings
7.1.6 Current proxy
7.1.7 Push messages
*
Shown only if it is supported by your SIM card
** May not be shown or supported by your network service pro-
vider.
*Shown only if it is supported by your SIM card.
54
55
Phonebook Menu
Phonebook Menu
Phonebook offers the following features:
Changing the Phone Memory Entries
Scroll to the category that you want to edit by
pressing the Left or Right key. Following categories
are available and you can edit information of each
category by pressing the Options soft key.
• Phonebook: allows you to find, create or set up
the speed-dialling feature and manage
Phonebook entries.
• Management: allows you to create or remove
your own number, set up caller groups and check
the memory status.
Category Options
Mobile
Home
Office
Fax
Select one of the following options. For
details for these options, refer to the
page 58.
• Services: allows you to use the service directory
depending on your SIM card.
Edit number
Change name
Other
Find Name (Phonebook 1.1)
Send message (shown if the category
contains a number)
To search for a number in the phonebook, proceed
as follows.
Copy (shown if the category contains a
number)
Send via infrared (shown if the
category contains a number)
Delete entry
1. Enter a letter(s) of the name that you want to
find.
The Phonebook entries are listed, highlighting
the entry matching your input.
E-Mail
Group
Graphic
Alert
Enter or edit e-mail address
Set one of the groups or no group
Set one of the images or no image
Set one of the melody or not assign
2. If necessary, press the Up or Down key to scroll
to the entry you want.
3. Once you have found the entry, press the Ok
soft key.
Changing the SIM Memory Entries
4.
To
Press the
To change the SIM memory entry’s information,
dial the displayed
number
key.
press the Options soft key.
change the
Phonebook entries
Options soft key. For
further details, see
page 57
56
57
Phonebook Menu
Phonebook Menu
The following options are available:
Add Entry (Phonebook 1.2)
Edit number
You can store phone numbers and the
This option allows you to change the number. You
can also add a new number if none has been stored
for the selected category.
corresponding names in the memory of your SIM
card. In addition, you can store up to 1000 names
in the phone memory and each name can be
associated with up to five numbers.
Change name
1. Enter the number you want to save.
This option allows you to change the name of the
entry.
Notes
:
• If you make a mistake while entering a number,
To clear the old name, press the C key. For more
information about how to enter characters, see
page 38.
correct it using the
page 25.
C
key. For further details, see
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
Send message
the
key. “P” is displayed to indicate the pause.
This option allows you to send a message to the
number. For more information about how to send a
message, see page 69.
2. When you are sure that the number is correct,
press the Save soft key.
Copy
3. Select the memory where the number is to be
stored, either Phone or SIM, and press the
Select soft key.
This option allows you to copy the entry from the
SIM card to the phone’s memory.
Send via infrared
Note: If you change phones, any numbers stored
in your SIM card will automatically be
available with the new phone, whereas any
numbers stored in the phone’s memory
must be stored again.
This option allows you to copy the entry from your
SIM card or phone memory to another device that
has the IrDA port via infrared.
Delete entry
4. If you select SIM in step 3, go to step 5.
If you select Phone in step 3, choose a number
type using the Up or Down key and press the
Select soft key.
This option allows you to delete the entry from
Phonebook. To confirm the deletion, press the Yes
soft key. Otherwise, press the No soft key.
5. Enter the associated name.
For information about how to enter characters,
see page 38.
58
59
Phonebook Menu
Phonebook Menu
6. When you are satisfied, press the Ok soft key.
3. Enter a phone number and press the Ok soft
key. Or,
7. If you select Phone in step 3, go to step 8.
To retrieve a number from your Phonebook,
press the Phonebook soft key. Select an entry
from the list and press the Ok soft key. Press
the Ok soft key to save it.
If you select SIM in step 3, enter the location
number and press the Ok soft key.
8. If you want to change the entry, use the options.
for information about how to do it, see page 57.
4. When you have finished, press the
the key to exit.
soft key or
If you want to return to Idle Mode, press the
soft key or the
key.
Editing the Speed-dial Entries
Storing a Number in Idle Mode
1. Select the speed-dial entry you want to edit
from the list and press the Select soft key.
As soon as you start to enter a number, Save
appears above the left soft key to allow you to store
the number in Phonebook.
2. Select one of the following menu options by
pressing the Up or Down key and press the
Select soft key:
Continue the procedure from step 1 on page 59 to
store the number.
• Edit number: allows you to change the
number.
• Change name: allows you to change the
Speed List (Phonebook 1.3)
name of the entry.
• Delete: allows you to clear the setting so that
no number is assigned to the key.
You can set up to eight speed-dial entries and then
dial them easily whenever you want, simply by
pressing the associated number key.
3. When you have finished, press the
the key to exit.
soft key or
Setting Up Speed-dial Entries
Using the Speed-dial Feature
1. Press the Up or Down key to scroll to an empty
When the idle screen is displayed, press the number
key, 2 to 9, assigned to the speed-dial entry and
location and press the Select soft key.
2. When the Edit number option highlights, press
press the
key. You can also press and hold the
the Select soft key.
number key.
Note: The
1
key is reserved for your voice mail server
number.
60
61
Phonebook Menu
Phonebook Menu
Dialling a Number Stored in the SIM Card
Once you have stored phone numbers in your SIM
card, you can dial them easily whenever required.
To dial a number stored in the SIM card:
1. Enter the number of the SIM card location where
the number you want to dial is stored.
IrDA port
IrDA port
2. Press the
key.
Note: This feature may not be available depending on
the devices.
The display shows the name and number stored
in that location.
Sending Your Phonebook
3. Press the Dial soft key or the
key.
1. Align the IrDA ports on both phones each other.
2. Choose one of the following options and press
the Select soft key:
Copy All to Phone (Phonebook 1.4)
• All: allows you to send all of the entries, from
the entry you choose to the end of the SIM
and Phone list.
You can copy all of the numbers stored in the SIM
card to the phone’s memory.
• SIM: allows you to send all of the entries,
from the entry you choose to the end of SIM
card list.
1. When a confirming message appears, press the
Yes soft key to copy.
The number are copied to the phone’s memory,
labelled with Mobile by default.
• Phone: allows you to send all of the entries,
from the entry you choose to the end of the
Phone list.
Otherwise, press the No soft key.
3. All of the entries stored in the corresponding
memory location are listed.
2. When you have finished, press the
the key to exit.
soft key or
4. Scroll to the entry you want to send and press
the Select soft key.
Send All Via Infrared (Phonebook 1.5)
Your phone begins sending the entry(ies).
Via the infrared connection, you can send your
Phonebook entries to another IRDA-compliant
devices and vice versa.
Receiving Phonebook from Another Phone
1. Align the IrDA ports on both phones each other.
62
63
Phonebook Menu
Phonebook Menu
2. Access the Infrared activation (Menu 4.8)
3. When you have finished checking, press the Ok
menu and select On to activate the port.
soft key.
3. When your phone receives Phonebook data from
the other device:
4. When a confirming message appears, press the
Yes soft key to delete all of the entries in the
memory(ies). Then enter the phone password
and press the Ok soft key. The password is
preset to “00000000” by default. To change it,
see page 104.
If the other person sends you the entry by One
entry, your phone displays the name and the
phone number and you can specify whether or
not you want to save it. Continue to step 4.
Otherwise, press the No soft key.
If the person sends you the entries by All, SIM,
Phone you can select a memory location, SIM
card or phone’s memory. Continue to step 5.
Own Number (Phonebook 2.1)
4. Press the Save soft key to store the entry.
To store your own phone number(s) with a name:
You can also delete the entry by pressing the
Cancel soft key.
1. Scroll to an empty location by pressing the Up or
Down key and press the Select soft key.
5. Press the SIM or Phone soft key.
The entries are saved in the appropriate
memory.
2. When Edit number highlights, press the Select
soft key.
3. Enter your number and press the Ok key.
Delete All (Phonebook 1.6)
4. To assign a name, press the Down key to move
to Change name and press the Select soft key.
You can delete Phonebook entries selectively
depending on the memory location, or all entries at
once.
5. Enter a name and press the Ok soft key.
6. When you have finished, press the
the key to exit.
soft key or
1. Scroll to the desired memory selection and place
a check mark ahead of it by pressing Select soft
key.
To remove one of your numbers:
1. Select the entry you want to delete from the
Selecting All places check marks on all of the
memories.
Own number list and press the Select soft key.
2. Scroll to Delete by pressing the Up or Down key
2. If necessary, repeat step 1 to check another
options.
and press the Select soft key.
64
65
Phonebook Menu
Phonebook Menu
3. When a confirming message appears, press the
Memory Status (Phonebook 2.3)
Yes soft key to delete the number.
You can check how many names and numbers are
stored in Phonebook, SIM card and phone’s
memories, and how many free locations remain.
Otherwise, press the No soft key.
4. When you have finished, press the
the key to exit.
soft key or
When you have finished, press the
the key to exit.
soft key or
Group Setting (Phonebook 2.2)
Service Directory (Phonebook 3.1)
You can change the settings of the five predefined
caller groups.
Note: This feature may not be available depending on
your SIM card.
1. Select a caller group by pressing the Up or Down
key and press the Select soft key.
The display shows the list of the numbers in the
Service Directory.
2. Scroll to a setting option by pressing the Up or
Down key and press the Select soft key.
If necessary, scroll to a number by pressing the Up
or Down key and press the
number.
key to dial the
The following options are available:
• Melody: allows you to select a melody to
sound when a call comes in from a member in
the group.
• Change name: allows you to change the
name of the group; for further details about
how to enter characters, see page 38.
• View image: shows the image to display
when a call comes in from a member in the
group.
3. Change the setting as required and press the
Select soft key.
4. Repeat steps 2 and 3 to change other options.
When you have finished, press the
the key to exit.
soft key or
66
67
Messages
Messages
Note: To clear the new message notification on the
display, press the key. When you also
This menu allows you to create, send, read and
save messages with the Short Message Service
(SMS: text message), Enhanced Message Service
(EMS: message including simple image, animation
or melody) and Multimedia Message Service
(MMS: message supporting the presentation of
various media types, such as full colour images,
polyphonic ring tones). Voice mails are also
available.
have missed calls, voice mails, short messages
or multimedia messages, and multi CBs, the
right soft key indication changes in the
following order: Missed, Connect, View, CB,
and Phonebook
.
Managing memory
Inbox and Outbox share a given amount of memory
in your phone or SIM card. When the message
Note: This feature is only available if your service
provider’s network supports it. Contact your
service provider for more information.
memory is full, the New message icon (
and an error message displays. (It disappears when
you press the key, but it reappears if you
) blinks
don’t delete old messages.) In this case, you cannot
receive any new messages. You must delete one or
more old messages to get free memory for new
messages using the Delete option within Inbox or
Outbox or the Delete all option; for further details,
see page 74.
Short Message (Menu 1.1)
Short message service (SMS) allows you to send
and receive short text messages to and from other
GSM mobile phones. In addition, your phone
supports the Enhanced Messaging Service (EMS),
which enables you to make short messages
consisting of simple pictures, melodies, animations
and styled text all of which adds a new dimension to
simple text messages.
Inbox (Menu 1.1.1)
Your phone receives incoming messages and saves
them in Inbox. SMS is usually saved in the SIM
card, but if the SIM memory is full, the incoming
messages will be saved in the phone’s memory.
To send text messages by phone, you must obtain
the number of the SMS centre from your service
provider.
When the Inbox menu is selected, the list of
messages received displays with the:
Receiving a new message
When you receive a new message, the New
• sender’s phone number, or name if stored in
Phonebook.
message icon (
) and a text notification showing
the number of the message appear on the display.
You also hear an alert, depending on the message
sound setting; for further details, see page 97.
• message status;
message to read or
message.
for a read message,
for an incomplete
for a
To read the new message(s) immediately, press the
View soft key. The list of the messages appears.
68
69
Messages
Messages
To view a message, scroll to it and press the Select
soft key. The screen shows the:
New Message (Menu 1.1.2)
Using this menu, you can write messages,
containing text, images and melodies.
• date and time when the message was received.
• memory where the message was stored;
for
1. Create a message.
the SIM card or
for the phone’s memory.
• message contents.
On the first line of the display, you see the
number of remaining characters you can enter,
the number of current message and the
maximum messages you can create, and the
font style you set in Text option.
You can scroll to the next or previous message by
pressing the Left or Right key.
To scroll through the message contents, press the
Up or Down key. When you focus on an object that
includes a melody, the melody is played.
Note: For further information about how to enter
characters, see page 38.
You can choose the following options by pressing
the Options soft key:
2. While entering your message, press the
Options soft key to use the following options.
Delete: allows you to delete the message.
• Send: allows you to send the message. Refer
to the next step.
Message reply: allows you to reply by sending a
message.
• Text: allows you to format the text. Following
text attributes can all be combined as
required.
Call back: allows you to call the sender back.
Cut address: allows you to send a message to the
number or paste the number into Phonebook.
Text size: Small/Medium/Large
Text mode: Normal/Underscore/Strikethrough
Bold: On/Off
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Italic: On/Off
Extract media: you can save media (except the
predefined EMS animations and sounds) from the
message into Media box. You can use these items
when writing a message.
Alignment: Left/Center/Right
• Add media: allows you to add pictures,
animations and/or melodies to the message.
Select a category; Add picture, Add
animation or Add melody. You can then
choose a factory-set object or an object that
you have received from another source and
stored in the Media box. See page 138.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory.
71
70
Messages
Messages
• Preset messages: allows you to add a preset
Outbox (Menu 1.1.3)
message to your text. Select one of nine
messages stored in the Preset messages
menu option (Menu 1.4). See page 86.
Outbox stores any messages that you have already
sent or just saved without sending.
• Save message: allows you to save the
message so that it can be sent later. You can
read the message in Outbox.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
• recipient’s phone number, or name if stored in
Phonebook.
3. When you have finished entering your message,
choose Send from the options.
• message status;
a message to send.
for a sent message or
for
4. Enter a destination number on the Address
screen.
To view a message, scroll to it and press the Select
soft key. The screen shows the:
You can search for a number in Phonebook by
pressing the Phonebook soft key.
• message status;
a message to send.
for a sent message or
for
for
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
• memory where the message was stored;
the SIM card or
for the phone’s memory.
• message contents.
To send the message to multiple destinations up
to 5, press the Add soft key and repeat step 4.
You can scroll to the next or previous message by
pressing the Left or Right key.
5. When you have finished entering the numbers,
To scroll through the message, press the Up or
Down key.
press the Ok soft key.
6. If the Enter centre screen displays, enter the
You can choose the following options by pressing
the Options soft key:
service number and press the Ok soft key.
You can store the SMS service centre number. For
details, see page 88.
Delete: allows you to delete the message.
Cut address: allows you to send a message to the
Note: When the phone fails to send the message,
press the Retry soft key to try again the
transmission. Or, press the No soft key and the
Save soft key to save the message or exit the
menu by pressing the No soft key.
number or paste the number into Phonebook.
Send: allows you to send the message to another
person.
Edit: allows you to edit the message.
Transfer: allows you to transfer the message from
the SIM card to the phone’s memory or vice versa.
73
72
Messages
Messages
messages. This function is available only if it is
Delete All (Menu 1.1.4)
supported by your service provider. Only phones
that offer picture message features can receive and
display picture messages.
You can delete all messages stored in the SIM card
and phone’s memory in this menu.
Retrieving a new message
1. Scroll to a message box and place a check mark
ahead of it by pressing the Select soft key.
When you are retrieving a message, the Retrieving
icon(
retrieving a new message, the New message icon
) and a text notification showing the number of
the message appear on the display. You also hear
an alert, depending on the message sound setting;
for further details, see page 97.
) appears on the display. When you finish
Selecting All places check marks on all of the
message boxes.
(
2. If necessary, repeat step 1 to check another
box.
3. When you have finished checking, press the Ok
To read the new message in Idle Mode, press the
View soft key. And then you see the list in Inbox. If
you select a message, you can read it.
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Note:
• When you set the Message reception(see page 89)
to Automatic, you cannot enter the Downloads
menu(Menu 7.3.1) and cannot also access WAP
sites while retrieving a new message. If a new
message comes in your phone while you play a Java
game, your phone only receive a notification
message. After playing the game, you can retrieve
the message with saved notification message.
• To clear the new message notification on the display,
Otherwise, press the No soft key.
Multimedia Message (Menu 1.2)
Multimedia Message Service (MMS) is a messaging
service very similar to Short Message Service
(SMS). It provides asynchronous delivery of
personal multimedia messages from between
phone and phone, phone and e-mail, phone and
web(by URL).
press the
key. When you also have missed
calls, voice mails, short messages or multimedia
messages, and multi CBs, the right soft key
indication changes in the following order: Missed
,
In addition to the familiar text content of text
messages, multimedia messages can contain
images, graphics, voice and sounds. An MMS
message is a multimedia presentation in a single
entry. It is not a text file with attachments.
Connect, View, CB, and Phonebook
.
If Message reception sets to Manual (for details,
see page 89), when the New message icon (
appears on the display, you have to retrieve
)
messages in Inbox. You select a message with the
icon such as and in Inbox. Then you
Using the MMS feature, your phone can receive
multimedia messages. You can also send picture
,
can select retrieve or delete message by pressing
the Options soft key.
75
74
Messages
Messages
Managing memory
To view a message, scroll to it and press the Select
soft key.
When the memory is full, the New message icon
(
) blinks and an error message displays. (It
To scroll through the message contents, press the
Up or Down key. When the message has more than
one page, you can press the Left or Right key to
move through the pages or the pages are moved
through as paging timing that sender fixed
automatically.
disappears when you press the key, but it
reappears if you don’t delete old messages.) In this
case, you cannot receive any new messages. You
must delete one or more old messages to get free
memory for new messages using the Delete option
within Inbox, Outbox, Draft or My folder, or the
Delete all option; for further details, see page 84.
Note:
• Some types of sound or picture may not be able
to play or display.
Note:
• You can only receive up to 150 messages.
• Multimedia message boxes and Media box share a
given amount of memory in your phone. You can
also use the Delete or Delete all option to delete
some sounds or images in Media box.
• When the message has an attachment like video
clips, the Attachment icon(
) appears on the
title line. You may not play the attachment. And
you may also not extract it from the message.
You can choose the following options by pressing
Inbox (Menu 1.2.1)
the Opt. soft key:
Delete: deletes the message
Your phone receives incoming messages and saves
them in Inbox.
Replay: replays the message.
When the Inbox menu is selected, the list of
messages received displays with the:
Reply: replies to the sender by sending a message.
Forward: forwards the message to another person.
Call back: allows you to call the sender back.
• message’s subject or no subject if the message
had no subject.
• sender’s phone number, or name if stored in
Phonebook.
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
• message status;
a message to read,
for a read message,
for a read notification
for
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
message and
read.
for a notification message to
Note: The icon of message status can have various
forms like as the priority that
sender fixed. (see page 88).
,
,
Properties: shows you detailed information about
the message.
77
76
Messages
Messages
Move to My folder: moves the message to the My
folder for later use.
Item
How to add
Sound
To add a new sound;
New Message (Menu 1.2.2)
1. Select the Record new option.
This menu option allows you to create a new
multimedia message and then send it to multiple
destinations.
2. Press the Record soft key to start
recording.
3. Press the Stop soft key to stop
recording.
1. Select one of the following items using the Up or
Down key and press the Add soft key.
4. Press the Play soft key to replay the
sound. Or, press the Add soft key to
add it. Enter the sound’s name and
press the Ok soft key. The sound is
added to the message and saved in
Media box automatically.
Item
How to add
Subject 1. Enter a subject of your message. For
details about entering characters, see
page 38.
To add a sound in Media box;
2. Press the Ok soft key.
1. Select one of the sound
categories.The sound list of the
category is displayed.
Note: To move a previous screen while
entering a subject, press and hold
the C key.
2. Select one of the sounds you want to
add.
Picture
1. Select one of the pictures you want to
add in MMS images. The picture will
be displayed.
3. Press the Select soft key to add it.
Message 1. Enter a new message. Or you can
enter a preset message.
2. Press the Add soft key.
To enter a preset message;
• Press the Opt. soft key and select the
Preset messages.
• Select one of the preset messages.
2. Press the Opt. soft key and select the
Done option to add the message.
Note: To move a previous screen while
entering a message, press and hold
the C key.
79
78
Messages
Messages
2. Press the Opt. soft key to use the following
Number: to enter a destination number.
options.
E-mail: to enter e-mail address.
• Preview: shows your message as it will
display on the recipient’s phone. To go back to
the message screen, press the Edit soft key.
To send the message, press the Send soft key
and go to step 4.
Phonebook: to enter a destination from
phonebook.
After entering a destination, press the Ok soft
key.
• Send: allows you to send the message to
another person. Refer to the next steps.
If it is not an empty entry, do the following
things.
• Add page: allows you to add up to 10 pages.
You can move to each page using the Left or
Right key on the message screen.
Edit address: to edit the selected address.
Delete address: to delete the selected
• Page timing: allows you to set how long one
page of the received messages displays. After
a specified time, the display automatically
scrolls to the next page.
address.
Note: To clear or clear all your input, press or press
and hold the C key. When you have no input,
press and hold the C key to move to the
previous screen.
• Clear subject/picture/sound/message:
allows you to delete the subject, image, sound
or message by selected work.
5. To send the message to multiple destinations up
to 20, repeat step 4.
• Delete page: allows you to delete the current
page.
6. When you have finished entering the numbers,
press the Send soft key.
• Save message: saves the message in Draft
(Menu 1.2.4) or My folder (Menu 1.2.5).
Press the Cancel soft key not to send the
message.
Note: To go back to the edit screen, press the
soft key or the
C
key.
When the phone fails to send the message, press
the Retry soft key to try again the transmission.
Or, press the Cancel soft key to save the message.
3. When you finish creating the message, select
Send from the options.
4. Select an entry on the Send screen.
Outbox (Menu 1.2.3)
If it is an empty entry, enter a destination as
below.
81
80
Messages
Messages
Outbox stores messages that you sent, sending,
you failed to send and you cancelled sending.
Draft (Menu 1.2.4)
This message box stores messages that you save,
interrupted messages by an incoming call or
message while you create a new message.
When the Outbox menu option is selected, the list
of messages you have sent or saved displays with
the:
Note: Saves messages that are failed to send in
• message’s subject or No subject if the message
had no subject.
Outbox.
To view a message, scroll to it and press the Select
soft key.
• recipient’s phone number, or name if stored in
Phonebook.
• message status;
a message that failed to send or cancelled
sending, for a delivered report. When
receiver retrieve a message you sent,
changed into
for a sent message,
for
You can choose the following options by pressing
the Opt. soft key:
Send: replies to the sender by sending a message.
Replay: replays the message.
is
.
To view a message, scroll to it and press the Select
soft key.
Delete: deletes the message.
Properties: shows you detailed information about
To scroll through the message, press the Up or
Down key. When the message has more than one
page, you can press the Left or Right key to move
through the pages or the pages are moved through
as predefined page timer, which the sender sets,
has elapsed.
the message.
My Folder (Menu 1.2.5)
You can move the messages stored in Inbox or
Outbox to the My folder by using the Move to My
folder option. While making a new message, you
can also save to My folder by using the Save
message option.
You can choose the following options by pressing
the Opt. soft key:
Delete: deletes the message.
Replay: replays the message.
Send: send the message.
To view a message, scroll to it and press the Select
soft key.
You can choose the following options by pressing
the Opt. soft key:
Properties: shows you detailed information about
the message.
Delete: deletes the message.
Move to My folder: moves the message to the My
Replay: replays the message.
folder box for later use.
83
82
Messages
Messages
Send: send the message.
Voice Mail (Menu 1.3)
Cut media: extracts the picture or sound, so that
you can set them as a wallpaper or ringtone or you
can send them as a multimedia message.
When you receive a voice mail, your phone displays
the icon and you hear an alert.
Cut address: extracts phone numbers, email
addresses or URL addresses in the text, so that you
can call the number or send a message to the
number or save it in your Phonebook.
Connect To Voice Mail (Menu 1.3.1)
• In Idle Mode, when you receive a new voice mail,
press the Connect soft key to access your voice
mail server and follow the instructions provided.
Properties: shows you detailed information about
the message.
• In Idle Mode, hold the 1 key down to access your
voice mail server and follow the instructions
provided.
Delete All (Menu 1.2.6)
• Call your voice mail server number by accessing
the Connect to voice mail menu (Menu 1.3.1)
and follow the instructions provided.
This menu option allows you to delete all of the
messages in each message box. You can also delete
all of your messages at one time.
1. Scroll to a message box and place a check mark
Voice Server Number (Menu 1.3.2)
ahead of it by pressing the Select soft key.
Before using the voice mail service, you must store
the voice mail server number obtained from your
service provider.
Selecting All places check marks on all of the
message boxes.
2. If necessary, repeat step 1 to check another
box.
When you select an entry, following options are
available.
Edit number: enter a voice mail server number or
press the Phonebook soft key to enter a number
from phonebook. And then press the Ok soft key.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the messages in the
box(es).
Change name: enter a server name and press the
Ok soft key to save it.
Delete: when the confirming message appears,
press the Yes soft key. To cancel, press the No soft
key.
Otherwise, press the No soft key.
85
84
Messages
Messages
Read: lets you read the received broadcast
messages.
Preset Messages (Menu 1.4)
Using this menu, you can preset up to nine
messages that you use most frequently. When you
access this menu, the preset message list displays.
Archive: shows the list of the messages you saved
from the temporary list.
Temporary: shows the latest messages. These
messages will be gone when the phone is switched
off.
1. Scroll to a message or an empty entry by
pressing the Up or Down key.
If the message is long, press the UP or Down key.
2. Press the Select soft key and enter a new
message or change the old message.
When you read a message, press the Options soft
key to access following options:
For further details about entering characters,
see page 38.
Cut number: shows the list of numbers included in
the message.
3. Press the Ok soft key to save the message.
Save: (Temporary only) saves this message to
Archive list.
Delete: delete this message.
Broadcast (Menu 1.5)
Delete All: delete all message on the list.
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately as they
are received, provided that:
Receive: allows you to turn the reception of
broadcast messages on or off.
Channel: the check mark inside All check box
• the phone is in Idle Mode.
indicates that the channel is enabled.
• the Receive option (Menu 1.5.2) is set to On.
To enable or disable this channel press the Select
soft key, then select Enable or Disable.
• the message channel is currently active on the
channel list.
The Add channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel code obtained from your service provider
and a title for the channel.
When you get broadcast messages, you can see the
messages in Idle mode. If it is short you can see
the display, otherwise, press the CB soft key to
read the message.
Language: selects a language you prefer. Then,
You can get cell broadcast messages only in the
language you selected.
In the Broadcast menu option, the following
options are available:
87
86
Messages
Messages
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Settings (Menu 1.6)
Short Message (Menu 1.6.1)
Delivery after: you can set the delay time before
the phone sends your messages.
Using this menu, you can set up default SMS
information. The following options are available:
Leave a copy: allows you to copy the message that
you sent.
Service centre: allows you to store or change the
number of your SMS centre required when sending
messages. You must obtain this number from your
service provider.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Message type: allows you to set the message type
to Text, Fax, Voice, ERMES, X400, or E-Mail. The
network can convert the messages into the selected
format.
Read reply: when this option sets to On, your
recipient’s phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
Reply path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
Message reception: allows you to set how you
receive a message. You can select one of Manual,
Automatic and Reject.
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Multimedia Message (Menu 1.6.2)
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Report allowed: when this option sets to Off, your
phone does not send a reply to the recipient’s
phone even if the sender asks for the read reply.
Send settings: The following options are available:
Priority: allows you to set the priority of message.
89
88
Messages
Messages
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
- GPRS only: it only works in GPRS network.
- GSM only: it only works in GSM network.
Current profile: allows you to select one profile to
use currently.
Memory Status (Menu 1.7)
Profile setting: allows you to set up to five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
You can check the memory status for messages.
Short Message (Menu 1.7.1)
• GSM setting: allows you to change the proxy
settings for the GSM network.
You can check how many messages are stored in
SIM card and phone’s memory.
- Gateway: enter the IP address and IP port.
When you have finished, press the
the key to exit.
soft key or
- Data call type: select a network connection
type between ISDN and Analogue.
Multimedia Message (Menu 1.7.2)
- Dial number:enter the server phone number.
- Login ID: enter the server login ID.
Media box and multimedia message boxes share a
given amount of memory in your phone.
- Password: enter the server password.
The display shows the percentage of memory used
by user and phone and the number of MMS saved in
your phone.
• GPRS setting: allows you to change the proxy
settings for the GPRS network.
- Gateway: enter the IP address and IP port.
When you have finished checking your memory,
- APN: enter the access point name used for
the address of the GPRS network gateway.
press the
previous menu.
soft key or the C key to go to the
- Login ID: enter the user ID required to connect
to GPRS network.
- Password: enter the password required to
connect to the GPRS network.
• Bearer: select the bearer to be used for each type
of network accesses.
91
90
Call Records
Call Records
• delete the current call record from the list.
Via this menu, you can view the:
• calls you missed, received or dialled.
• cost of your calls.
• delete all of the calls.
• paste the number into Phonebook.
• length of your calls.
Dialled Calls (Menu 2.3)
Note: You can access the numbers in the three types
of call records by pressing the
Mode.
key in Idle
This option lets you view the last 20 dialled
numbers.
The number, or name if available, displays together
with the date and time when the call was made.
Missed Calls (Menu 2.1)
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all the calls.
This option lets you view the last 20 unanswered
calls if the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was missed.
• paste the number in Phonebook.
By pressing the Options soft key, you can also:
• delete the current call record from the list.
• delete all of the calls.
Delete All (Menu 2.4)
• paste the number into Phonebook.
You can delete all of the numbers stored in each call
record.
When a confirming messages appears, press the
Yes soft key to confirm.
Received Calls (Menu 2.2)
Otherwise, press the No soft key.
This option lets you view the last 20 received calls if
the caller line identification is available.
The number, or name if available, displays together
with the date and time when the call was received.
By pressing the Options soft key, you can also:
92
93
Call Records
Call Records
The following options are available:
Call Time (Menu 2.5)
Last call cost: cost of the last call made.
This option lets you view the timers for calls made
and received.
Total cost: total cost of all calls made since the
cost counter was last reset. If the total cost exceeds
the maximum cost set via the Set max cost
option, you can no longer make any calls until you
reset the counter.
Notes:
• If your SIM card supports the ALS (Alternate Line
Service) feature, you must first select the
appropriate line.
• The actual time invoiced for calls by your service
provider may vary, depending on network features,
rounding-off for billing purposes and others.
Max cost: maximum cost set via the Set max cost
option.
Reset counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 150) and then press the Ok soft key.
The following timers are available:
Last call time: the length of the last call.
Set max cost: option used to enter the maximum
cost that you authorise for your calls; you must first
enter your PIN2 (see page 150) and then press the
Ok soft key.
Total sent: the total length of all calls made since
the timer was last reset.
Total received: the total length of all calls
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls; you must first enter your PIN2
(see page 150) and then press the Ok soft key.
received since the timer was last reset.
Reset timers: the option used to reset the call
timers. You need to enter the phone password and
then press the Ok soft key.
Call Costs (Menu 2.6)
This feature lets you view the cost of calls.
Notes:
• This feature is not intended to be used for billing
purposes.
• AOC (Advice Of Charge) information may display in
Idle Mode, depending on your SIM card or service
provider.
95
94
Sound Settings
Sound Settings
Alert type: lets you specify how you are informed
of any incoming calls.
You can use the Sound settings feature to
customise various settings, such as the:
Melody: the phone rings using the melody selected
via the Melody option. See above.
• ring tone, volume and type for incoming calls or
messages.
Vibration: the phone vibrates but does not ring.
• sounds made when your call is connected or
when you press a key.
Vibration then melody: the phone first vibrates and
then starts ringing.
• Quiet Mode to which your phone switches when
Light only:only the service light is switched on. The
phone neither rings nor vibrates.
you hold down the
key.
Incoming Calls (Menu 3.1)
Messages (Menu 3.2)
This option allows you to set up the ringer for
incoming calls.
This option allows you to set up the ringer for each
incoming short and multimedia messages.
Note: If your SIM card supports the ALS (Alternate
Line Service) feature, you must select the line
you wish to change first.
Short Message (Menu 3.2.1)
/
Multimedia Message (Menu 3.2.2)
The following options are available:
The following options are available:
Tone: lets you choose from many different tones.
Each time you select a tone from the list, the tone is
played.
Each time you select a melody from the list, it plays
the melody.
Default melodies: allows you to select one of the
predefined melodies.
Alert type: lets you specify how you are informed
of any incoming messages.
My sounds: allows you to select one of sounds
received from other sources, such as the WAP sites,
the EasyStudio PC software or multimedia
messages.
Light only: only the backlight is switched on. The
phone neither rings nor vibrates.
Tone: the phone rings using the tone selected via
the Tone option. See above.
Ring volume: allows you to adjust the ring
volume. Use the Up and Down keys or the volume
keys on the left side of the phone. The more bars
you see, the louder the volume.
Vibration: the phone vibrates but does not ring.
Vibration then tone: the phone first vibrates and
then starts ringing.
96
97
Sound Settings
Sound Settings
Repetition: allows you to specify how often the
phone informs you of a new message. You can
choose either Once or Periodic.
Beep: each key, when pressed, makes the same
sound.
Woman / Girl: each key (numberic keypad), when
pressed, makes a woman’s / girl’s voice saying the
number printed on the button in chinese.
Power On/Off (Menu 3.3)
Piano / Drum: each key, when pressed, makes a
different sound like playing the piano or the drum.
This option allows you to select the melody that the
phone sounds when you switch it on or off.
To adjust the key tone volume, press the volume
keys on the left side of the phone in Idle Mode with
the folder open.
You can choose either Basic or Cheerful. To turn
the sound off, select Off.
Minute Minder (Menu 3.6)
Connection Tone (Menu 3.4)
This menu option allows you to specify whether or
not the phone beeps every minute during a call to
keep you informed of the length of your call.
This menu option allows you to specify whether or
not the phone beeps when the phone connects to
the network.
The following options are available:
Off: the phone does not beep.
The following options are available:
Off: the phone does not beep.
On: the phone beeps every minute.
On: the phone beeps when your call is accepted.
Quiet Mode (Menu 3.7)
Key Tone (Menu 3.5)
When you hold the
key down in Idle Mode, the
This menu option allows you to select the tone that
the keypad sounds when you press a dial key.
phone switches to the Quiet Mode. You can specify
whether the phone vibrates or mutes about all
sounds in the Quiet Mode.
The following options are available:
The following options are available:
Off: the keys do not make any sound.
Vibration: the phone vibrates rather than rings in
the Quiet Mode.
Tone: each key, when pressed, makes a different
sound.
Mute: the phone mutes sound settings in the Quiet
Mode.
99
98
Phone Settings
Phone Settings
Many different features of your phone can be
customised to suit your preferences via the
Phone settings menu.
Display (Menu 4.2)
You can change the background image and the
colour of the components on the display according
to your preference and needs.
Wallpaper (Menu 4.2.1)
Greeting Message (Menu 4.1)
This option allows you to change the background
image to be displayed in Idle Mode.
This menu option allows you to set a greeting
message to be displayed briefly when the phone is
switched on.
The following options are available:
Animations: allows you to select one of the
animations.
When you access this menu, the current message
displays.
Images: allows you to select one of images in the
Images box in the Media box menu that are
downloaded from the WAP sites, the EasyStudio PC
software or multimedia messages.
To
Press the
clear the existing
message
C key and hold it down.
Text position: allows you to select the position of
the text displayed on the idle screen, such as the
operator’s name, current date and time, and text
notifications of missed calls or new messages.
Choose either Top or Bottom. If you set this option
to Off, your phone displays only the wallpaper
image.
enter a new
message
appropriate alphanumeric
keys.
save your input
Ok soft key.
cancel your input
and return to Idle
Mode
key.
Text style: allows you to set the style of the text
displayed on the idle screen.
For further information on how to enter text, see
page 38.
Note: When you set the wallpaper image to
Calendar, the Text position and Text style
options don’t work.
Skin (Menu 4.2.2)
You can change the colour setting of the display
components, such as soft key indications area or
the menu names and icons.
100
101
Phone Settings
Phone Settings
Various codes and passwords are used to protect
the features of your phone. They are described in
the following sections. See also page 149 -151.
Backlight (Menu 4.2.3)
You can specify how long the phone uses the
backlight.
Select how long the backlight remains on after the
last key is pressed or the folder is open.
PIN Check (Menu 4.4.1)
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
LCD Brightness (Menu 4.2.4)
This option allows you to adjust the brightness of
the display screens to make them lighter or darker.
Note: Before disabling the PIN Check feature, you
must enter your PIN.
To adjust the display contrast:
The following options are available:
1. Select the LCD to be adjusted, Main LCD or
External LCD, and press the Select soft key.
Disable: the phone connects directly to the
network when you switch it on.
2. Adjust the brightness by using the Up and Down
keys or the volume keys on the left side of the
phone.
Enable: you must enter the PIN each time the
phone is switched on.
3. When you are satisfied, press the Ok soft key to
To change your PIN, see the Change PIN menu
save the selection.
option.
Change PIN (Menu 4.4.2)
Language (Menu 4.3)
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature
is enabled. You must enter the current PIN before
you can specify a new one.
You can select a different language for the display
text.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Security (Menu 4.4)
Phone Lock (Menu 4.4.3)
The security settings enable you to restrict the use
of your phone to the people and types of calls of
your choice.
When the Phone lock feature is enabled, the phone
is locked and you must enter the 8-digit phone
password each time the phone is switched on.
103
102
Phone Settings
Phone Settings
The password is preset to “00000000” at the
factory. To change the phone password, see the
Change password menu option.
The following options are available:
Disable: you can use any other SIM cards with
your phone.
Once the correct password has been entered, you
can use the phone until you switch it off.
Enable: you must enter the SIM lock code to use
another SIM card with your phone.
The following options are available:
To unlock the SIM, enter the SIM lock code.
Disable: you are not asked to enter the phone
password when you switch the phone on.
FDN Mode (Menu 4.4.7)
Enable: you are required to enter the phone
password when you switch the phone on.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Change Password (Menu 4.4.4)
The following options are available:
The Change password feature allows you to change
your current phone password to a new one. You
must enter the current password before you can
specify a new one.
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
The password is preset to “00000000” at the
factory. Once you have entered a new password,
you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To change your PIN2, see the Change PIN2 menu
option on the below.
Privacy (Menu 4.4.5)
Change PIN2 (Menu 4.4.8)
This feature allows you to lock or unlock the usage
of the contents, such as multimedia messages,
images and sounds.
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
To enable or disable the privacy feature, you must
enter your phone password.
Once you have entered a new PIN2, you are asked
to confirm it by entering it again.
SIM Lock (Menu 4.4.6)
Note: Not all SIM cards have a PIN2. If your SIM card
does not, this menu option is not displayed.
To enable the SIM lock feature, you must enter a
new four- to eight-digit SIM lock code, and confirm
it by entering it again.
105
104
Phone Settings
Phone Settings
In this menu, you can enable the fax mode on your
phone.
Auto Redial (Menu 4.5)
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
The following options are available:
Off: you can send or receive data calls.
On: you can send or receive fax calls.
In any case you can send or receive voice calls.
Note: The interval between two call attempts varies.
The following options are available:
Off: the number is not redialled.
After connecting the phone to your computing
device using the data cable and set this menu to
On. Your phone works as a fax modem.
On: the number is redialled automatically.
For further details about setting and faxing through
the phone on your computer, see the computers
user’s manual.
Side Key (Menu 4.6)
This menu option allows you to change the function
of the volume keys on the left side of the phone
when you receive an incoming call.
Infrared Activation (Menu 4.8)
This feature allows you to send or receive data
through the infrared port.
The following options are available:
Reject: the incoming call is rejected when you hold
down one of the volume keys.
In this menu, you can activate or deactivate the
infrared port.
Silence: the ring tone is silenced when you hold
down one of the volume keys; the call is not
rejected.
The following options are available:
Off: deactivates infrared feature on the phone.
On: activates the infrared feature on the phone.
The IrDA icon (
display.
) appears on the top line of the
Fax Mode (Menu 4.7)
If there is no communication between your phone
and the IrDA-compliant device within 1 minute of
activating the feature, it is automatically
deactivated.
You can use your phone as a modem for faxing
when it is connected to computing devices. You
need to purchase a data kit from your local
Samsung dealer.
107
106
Phone Settings
Service Light (Menu 4.9)
This option allows you to select whether or not the
service light on.
Off: the service light does not flash.
On: the service light flashes when your phone is in
service area.
Active Folder (Menu 4.10)
When this option is selected to On, you can simply
open the folder to answer a call. When it is Off, you
must open the folder and press the
key or
Accept soft key to answer a call.
Reset Settings (Menu 4.11)
This menu option allows you to reset your phone to
its default configuration. You can reset the sound
settings, phone settings or all of the settings
together.
1. Select one of the settings to reset by pressing
the Select soft key.
2. When a confirming message appears, press the
Yes soft key to reset settings. Then enter the
phone password and press the Ok soft key.
The password is preset to “00000000” by
default. To change it, see page 104.
Otherwise, press the No soft key.
108
Organiser
The Organiser feature enables you to:
• view the calendar and/or write a memo or to do
list.
• set the current date and time, and find out what
time it is in various cities around the world.
• set the alarm so that the phone rings at a specific
time.
• use your phone as a calculator, unit convertor,
timer or stopwatch.
New Memo (Menu 5.1)
This menu option allows you to create a new memo.
Note: You can also access this menu by holding down
the
C
key in Idle Mode.
1. Write your memo of up to 100 characters and
press the Ok soft key.
For further information about how to enter text,
see page 38.
2. Select the category of the memo to be saved
and press the Select soft key.
The following categories are available:
• Scheduler: general schedule events, such as
appointments or meetings.
• To do list: tasks you need to do. They are
saved on the to do list.
• Call: calls you need to make.
109
Organiser
Organiser
• Anniversary: anniversaries to be
10. You can choose the following option by pressing
remembered, such as wedding anniversaries,
birthdays or other special days.
the Options soft key:
• Add: allows you to add a new memo on the
day.
Note: You can save up to 25 items to each
category, so you can save 100 memos
totally.
• Delete: allows you to delete the memo.
• Edit: allows you to edit the memo.
3. Scroll to a date on the calendar by pressing the
• Move: allows you to move the memo to a
different date.
navigation keys. Press the Select soft key.
• Copy: allows you to copy the memo to a
different date.
4. If applicable depending on the category you
selected, enter the event time and press the Ok
soft key.
11. When you have finished, press the
or the key to exit.
soft key
5. If you have selected the 12-hour time format
(see page 116), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
Calendar (Menu 5.2)
6. To set an alarm for the memo, press the Yes
The calendar helps you to keep track of schedule,
calls that you need to make, tasks that you need to
do and anniversaries. You can set the alarm to ring
when the set date for a schedule is reached.
soft key.
Otherwise, press the No soft key. The memo is
saved immediately. Go to step 10.
7. Enter the time for the alarm to sound and press
Consulting the Calendar
the Ok soft key.
To
Press the
8. If you have selected the 12-hour time format
(see page 116), select AM or PM by pressing
the Up or Down key and then press the Select
soft key.
move to another
day
Left or Right key.
move to another
week
Up or Down key.
9. Select an alarm melody and press the Select
move to the
previous or next
month
Up or Down key and hold it
down
soft key.
The memo is saved and then displays on the
screen.
move to the
previous or next
year
Left or Right key and hold it
down.
110
111
Organiser
Organiser
The following options are available when you press
the Options soft key on the Calendar display:
Viewing Your Calendar Memos
A date that has a memo associated with it is
highlighted in a red box. If you select a date when
events have already been scheduled, the number of
memos of each type is shown at the bottom of the
calendar.
Add memo: allows you to add a new memo on the
day.
Go to date: allows you to enter a particular date
and then schedule an event on that date.
•
•
•
•
: General schedule events
: To do list
View all: shows all of the events that you have
scheduled.
: Calls
Delete day: deletes the scheduled event on the
selected day.
: Anniversaries
Delete all: deletes all of the events that you have
Press the Select soft key to view the memos.
scheduled.
If you have created more than one memo on the
same day, you can scroll to the event you want to
view by pressing the Left or Right key.
Creating a New Memo
1. Scroll to a date on the calendar, referring to
The following options are available when you press
the Options soft key:
page 111, and press the Select soft key.
2. Write your memo and press the Ok soft key.
Add: allows you to add a new memo. For further
information about how to add a memo, see
page 109.
For further information about how to enter
characters, see page 38.
Delete: allows you to delete the memo.
3. Select the category of the memo to be saved
and press the Select soft key.
Edit: allows you to edit the memo.
The following categories are available:
Move: allows you to move the memo to a different
• Scheduler: general schedule events, such as
date.
appointments or meetings.
Copy: allows you to copy the memo to a different
date.
• To do list: tasks you need to do.
• Call: calls you need to make.
• Anniversary: anniversaries to be
remembered, such as wedding anniversaries,
birthdays or other special days.
4. Follow the procedure from step 4 on page 110
onwards to save the memo.
112
113
Organiser
Organiser
Delete: allows you to delete the task.
To Do List (Menu 5.3)
Delete all: allows you to delete all of tasks from
the list.
This menu allows you to view a list of tasks.
To create a new memo of the To do list type:
1. Write the memo about your task and press the
Clock (Menu 5.4)
Ok soft key.
For more information about how to enter
characters, see page 38.
This option allows you to change the current time
and date displayed. You can also check the current
time for Greenwich Mean Time (GMT) and 21 major
cities around the world.
2. Follow step 4 on page 110 onwards to save the
memo.
The following options are available:
Once you have defined tasks, they are listed with a
Set time: allows you to enter the current time. You
can choose the time format in the Set format
menu option; see page 116.
status mark (
the To do list menu.
for Done or
for Undo) within
To scroll to a specific task, press the Up or Down
key and press the Select soft key. The task displays
with the deadline, alarm setting, job details and
status mark.
Note: Before setting the time, you must specify your
time zone in the Set world time menu option.
Set date: allows you to enter the day, month and
year. You can change the date format in the Set
format menu option; see page 116.
You can scroll to the previous or next task by
pressing the Left or Right key.
The following options are available when you press
the Options soft key:
Set world time: allows you to check the current
time in GMT and 21 major cities around the world.
Scroll through the cities using the Left or Right key.
Add: allows you to add a new task. For details
about adding To do list-type memos, see page 109.
Mark: allows you to change the status mark.
The screen shows the:
• city name.
Edit: allows you to edit the contents of the task.
• current date and time.
Move: allows you to move the task to a different
• time difference between the selected city and
your city if you have set the local time (see
below).
date.
Copy: allows you to copy the task to a different
date.
114
115
Organiser
Organiser
To select your time zone:
Alarm (Menu 5.5)
1. Select the city corresponding to your time zone
by pressing the Left or Right key one or more
times.
This option allows you to set an alarm to ring at a
specific time. You can set up to three alarms or set
the phone to ring an alarm when it is switched off.
The local date and time display.
To set an alarm:
2. Press the Set soft key.
1. Select either Morning call, Alarm1 or Alarm2
by pressing the Up or Down key.
3. To
Select
The
set. The
icon means that no alarm is currently
icon means that an alarm has
update the current Set local.
date/time with this
new setting
already been set.
2. Press the Select soft key.
3. Press the Options soft key.
indicate that the
time zone is
currently using the difference.
Set DST. The
shown next to the time
icon is
daylight saving
time
4. Scroll to an option by pressing the Up or Down
key and press the Select soft key. Change the
setting, as needed.
indicate that the
time zone is no
longer using the
daylight saving
time
Remove DST (only
• Alarm day: place or remove a check mark on
the day(s) of the week by pressing the Select
soft key. If you want to set a daily alarm,
select Everyday. If you want to set a
available when the
icon is shown next to the
time difference).
temporary alarm, select Once alarm. When
you press the Ok soft key after selecting, your
phone asks you to enter the alarm time.
4. When you have finished, press the
the key to exit.
soft key or
• Alarm time: enter the time for the alarm to
sound.
Set format: allows you to change the time and
date formats.
• Alarm tone: select an alarm melody.
• Remove alarm: deactivates the alarm.
Time format: 24 hours
12 hours
Note: The alert type of Alarm1 and 2 is affected by
the alert type of incoming call. Morning call’s
alert type is always melody.
Date format: DD/MM/YYYY (day/month/year)
YYYY/MM/DD (year/month/day)
116
117
Organiser
Organiser
5. Repeat step 4 to change each setting.
6. When you have finished, press the
Calculator (Menu 5.6)
soft key or
You can use the phone as a calculator. The
the
key to exit.
calculator performs basic arithmetic functions, such
as addition, subtraction, multiplication, division and
remainder computation.
Once an alarm has been set, you can see the Alarm
icon ( ) on the top line of the display. To stop the
alarm when it rings, open and close the phone or
press any key.
To perform a calculation:
1. Enter the first number using the number keys.
Note: When the Quiet Mode is activated, the alarm
tone doesn’t sound. But When you set an
Morning call, it sounds the alarm tone even if
the Quiet Mode is activated.
Note: To erase any mistakes or clear the display,
press the
C
key.
2. Press the
key to enter a decimal point (.) or
To set the alarm to ring even if your phone is
switched off:
the key to enter the appropriate arithmetic
symbol: + (add), - (subtract),
(multiply), /
(divide), % (remainder), ( or ).
1. Scroll to Auto power on the Alarm list and
press the Select soft key.
3. Enter the second figure.
2. If necessary, press the Up or Down key to select
4. Repeat steps 2 and 3, if necessary.
On.
5. Press the Equal soft key to view the result.
The result appears in the Answer box.
To turn the Auto Power feature off, select Off.
3. Press the Select soft key to save the setting.
Note: The result is rounded to six decimal places.
4. When you have finished, press the
the key to exit.
soft key or
6. When you have finished, press the
the key to exit.
soft key or
Once you have activated the auto power alarm, a
check mark appears ahead of Auto power. If the
phone is switched off at the specified alarm time, it
automatically switches on and rings the alarm. It
then automatically switches off again.
118
119
Organiser
Organiser
Units Available
Conversion (Menu 5.7)
Type
Units
This menu option allows you to convert from one
type of unit to another.
Length
mm
km
cm
in
m
ft
To convert a value:
yard
mile
1. Scroll to the type of conversion to be performed
from Length, Weight, Volume, Area and
Temperature, and press the Select soft key.
Weight
Volume
g
kg
ton
grain oz
pound
cm3
in3
m3
ft3
l
2. Enter the value to be converted and press the
yd3
Down key to move to the From field.
gal
You can enter a decimal point (.) using the
key.
Area
cm2
in2
m2
ft2
a
yd2
3. Select the original unit by pressing the Left or
Right key and press the Down key to move to
the To field.
acre
Temperature
°C
°F
Refer to the table on the following page for the
units available.
Timer (Menu 5.8)
4. Select the required unit by pressing the Left or
Right key.
Using the Timer feature, you can set the phone to
sound an alarm after a certain time.
5. Press the Ok soft key or the
key to view the
result.
1. Press the Set soft key.
The result appears in the Answer box.
2. Enter the length of time you want to count down
in hours and minutes and press the Ok soft key.
6. When you have finished, press the
the key to exit.
soft key or
3. Press the Start soft key to start counting down.
Even if you exit the Timer screen, the timer will
continue running. After the specified time has
expired, the phone informs you by playing a melody
and displaying a text notification.
120
121
Organiser
Network Services
These menu functions are network services.
Please contact your service provider to check their
availability and subscribe to them, if you wish.
To stop the timer melody when it rings, open and
close the phone or press any key.
To stop the timer before the end, press the Stop
soft key on the Timer screen.
Note: The timer uses power from the battery;
consequently, the phone’s operating time is
reduced.
Call Diverting (Menu 6.1)
Note: The call divert options may be different
depending on your SIM card and those not
supported by your network operator may not
be shown.
Stopwatch (Menu 5.9)
The stopwatch can be used to measure times for
various sports.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: Running or swimming races
Up to four stopwatches can be used.
Example: You may wish to divert your business
calls to a colleague while you are on
holiday.
The precision of the stopwatch is one hundredth of
a second. The maximum measurement time is 10
hours.
Call diverting can be set up in the following ways:
Divert always: all calls are diverted.
1. To start the stopwatches, press the Ok soft key.
Busy: calls are diverted if your phone is engaged
on another call.
2. When you wish to stop the first stopwatch, press
the Ok soft key. Repeat this step for the other
stopwatches.
No reply: calls are diverted if you do not answer
the phone.
Unreachable: calls are diverted if you are not in an
area covered by your service provider.
3. Press the Reset soft key to reset the watches.
4. Press the C or
key to exit.
Cancel all: all call diverting options are
deactivated.
You can specify individual call diverting options for
each of the following call types:
• Voice calls only
122
123
Network Services
Network Services
• Fax calls only (not available when line 2 is in use)
Deactivating Specific Call Diverting
Options
• Data calls only (not available when line 2 is in
use)
1. Select the call diverting option to be
deactivated.
Example: You can:
• systematically divert fax calls to your
office fax machine.
• divert voice calls to your colleague if
you are already using the phone.
2. Select the type of calls to which this option
applies.
3. Press the Remove soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Setting Call Diverting Options
1. Select the type of call diverting by pressing the
Up or Down key and then press the Select soft
key.
You can also deactivate all call diverting options by
selecting the Cancel all option.
2. Select the type of calls to be diverted by
pressing the Up or Down key and then press the
Select soft key.
Call Barring (Menu 6.2)
The call barring network service allows you to
restrict your calls.
3. Press the Activate soft key to confirm your
settings.
Call barring can be set up in the following ways:
All outgoing: calls cannot be made.
4. Enter the number to which the calls are to be
diverted.
International: international calls cannot be made.
To enter an international code, hold down the 0
key until the + sign displays.
International except to home: when abroad,
calls can be made only to numbers within the
current country and to your home country, that is
the country where your home network provider is
located.
You can also select a number in Phonebook or
the voice mail server number, by pressing the
Options soft key, followed by Phonebook or
Voice server.
All incoming: calls cannot be received.
5. When you are satisfied, press the Ok soft key.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
The phone sends your settings to the network
and the network’s acknowledgement displays.
124
125
Network Services
Network Services
Cancel all: all call barring options are deactivated;
calls can be made and received normally.
4. Enter your call barring password supplied by
your service provider.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can specify individual call barring options for
each of the following call types:
• Voice calls only
You can also deactivate all call barring options by
selecting the Cancel all option.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Changing the Barring Password
You can set and change the call barring password
obtained from your service provider.
Setting Call Barring Options
1. Select Change barring password from the
Call barring screen, and press the Select soft
key.
1. Select the type of call barring by pressing the Up
or Down key and then press the Select soft key.
2. Select the type of calls to be barred by pressing
the Up or Down key and then press the Select
soft key.
2. Enter the current password and press the Ok
soft key.
3. Enter a new password and press the Ok soft
3. Press the Activate soft key to confirm your
key.
settings.
4. Enter the new password again to confirm it and
4. Enter your call barring password supplied by
press the Ok soft key.
your service provider and press the Ok soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
Deactivating Specific Call Barring
Options
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option
applies.
3. Press the Deactivate soft key.
126
127
Network Services
Network Services
Call Waiting (Menu 6.3)
Network Selection (Menu 6.4)
This network service informs you when someone is
trying to reach you during another call.
The Network selection feature enables you to
automatically or manually select the network used
when roaming outside your home area.
You can specify individual call waiting options for
each of the following call types:
Note: You can select a network other than your home
network only if it has a valid roaming
• Voice calls only
agreement with your home network.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
To indicate to automatically or manually select the
network when roaming:
1. Press the Up or Down key until the appropriate
Activating the Call Waiting Feature
option highlights and press the Select soft key.
1. Select the type of calls to which the call waiting
option is to be applied by pressing the Up or
Down key and then press the Select soft key.
If you select Automatic, you are connected to
the first available network when roaming.
If you select Manual, the phone scans for the
available networks. Go to step 2.
2. Press the Activate soft key to confirm your
settings.
2. Press the Up or Down key until the preferred
network highlights and press the Select soft
key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You are connected to that network when
roaming.
Deactivating Specific Call Waiting
Options
1. Select the type of call to which the option
applies.
2. Press the Deactivate soft key.
The phone sends your settings to the network
and the network’s acknowledgement displays.
You can also deactivate all call waiting options by
selecting the Cancel all option.
128
129
Network Services
Fun Box
The Fun box menu contains several fun options:
Caller ID (Menu 6.5)
You can prevent your phone number from being
displayed on the phone of the person being called.
• WWW services
• Media box
Note: Some networks do not allow the user to change
• Java world
this setting.
The following options are available:
WWW Services (Menu 7.1)
Default: the default setting provided by the
network is used.
Your phone comes equipped with a WAP (Wireless
Application Protocol) Browser, making it possible for
you to access the Wireless Web.
Hide number: your number does not display on
the other person’s phone.
Each time you start the WAP Browser, the phone
connects to the Wireless Web and the service
Send number: your number is sent each time you
make a call.
indicator icon (
or
) appears on the display
to inform you that you are connected to the
Wireless Web and will be billed accordingly. Rates
vary according to your service option.
Active Line (Menu 6.6)
The WAP Browser ends the network connection
after a certain period of inactivity and automatically
reconnects as necessary. For this reason, you may
find that you are billed for several network
connections within a single session. This is normal
and is designed to minimise your bill.
Some SIM cards may be used with two subscriber
numbers. This functions is available only if your SIM
card supports it.
This menu option allows you to select the line to be
used to make calls. However, calls can be answered
on both lines, regardless of the selected line.
Home (Menu 7.1.1)
When you select this menu option, the phone
connects to the network and loads the homepage of
the Wireless Web service provider.
Once connected, the homepage displays. The
content depends on the service provider.
Note: To quickly launch the WAP browser from Idle
Mode, press the
key.
130
131
Fun Box
Fun Box
To scroll through the screen, use the Up and Down
keys.
There are various menu options available when
surfing the Wireless Web.
To access the WAP Browser menu:
To exit the browser, press the
key at any
time. The phone returns to Idle Mode.
1. Press the
key or scroll to the logo on the top
left of all Web pages and then press the (
soft key.
)
Navigating the WAP Browser
A list of options appears.
To
Press the
2. Highlight the required option using the Up or
Down key.
scroll through and Up or Down key until the item
select browser
items
you want highlights, and then
press the soft key.
3. Press the
soft key to select the option.
select a numbered corresponding numeric key.
item
4. If necessary, select the secondary option by
pressing the Up or Down key and then press the
soft key.
return to the
previous page
(or Back) soft key or C
key.
Note: The WAP Browser menus may vary,
return to the
key and select the Home
depending on your version of the browser.
startup homepage browser option. For details,
see page 132.
The following WAP Browser menus are available:
Back: returns to the previous page.
Entering Text in the WAP Browser
Home: takes you back at any time to the
homepage of the Wireless Web service provider.
When you are prompted to enter text, the current
text input mode appears above the right soft key.
Exit: exits the WAP browser.
Reload: reloads the current page.
For further information on how to enter text, see
page 38.
Show URL: shows the URL address of the Web
page you are currently accessing.
Using the WAP Browser Menus
Advanced: the following options are available:
Clear cache: clears the information stored in the
cache the phone’s temporary memory used to store
the most recently accessed Web pages.
About...: shows browser information.
132
133
Fun Box
Fun Box
Using the WAP Browser Options
For further information about how to enter text,
see page 38.
Several options are available when you are surfing
the Wireless Web. To access these options, press
Once you have stored an address, the following
options are available when you select it.
the
key once connected to the Wireless Web.
Goto URL: allows you to manually enter the URL
address of the site that you wish to access.
Go: allows you to access the site directly.
Edit: allows you to change the name and URL
address of the bookmark.
Bookmark: allows you to use the Bookmark
menu option. For details, see page 134.
Delete: allows you to delete the bookmark.
Messages: allows you to read or write an SMS
message. For details, see page 68.
Go to URL (Menu 7.1.3)
Media box: allows you to use your Media box. For
details, see page 138.
This menu option allows you to manually enter the
URL address of the Web site that you wish to
access.
Answering a Call During a WAP Connection
Enter the URL address and press the Ok soft key.
You can receive an incoming call while you are
navigating the WAP browser.
For further information about how to enter text, see
page 38.
Answer the call by pressing the
key, as you
normally would. After ending the call, you can
continue navigating on the Web page you
previously were accessing.
Clear Cache (Menu 7.1.4)
This menu option allows you to clear the
information stored in the cache, the phone’s
temporary memory used to store the most recently
accessed Web pages.
Bookmark (Menu 7.1.2)
This menu option allows you to store the URL
addresses of up to 10 of your favourite Web sites.
Proxy Settings (Menu 7.1.5)
To store a URL address:
This menu option allows you to set up five proxy
servers.
1. Select an empty location and press the Select
soft key.
Note: You do not need to change the browser settings
in most cases. Change the settings only when
your network provider asks you to.
2. Enter the address and press the Ok soft key to
save it.
3. Enter the name of the bookmark and press the
Ok soft key.
134
135
Fun Box
Fun Box
For each proxy, the following options are available:
GPRS first: your phone will search for the GPRS
network first. If this service is not available, you
can set the GSM service temporarily.
Proxy name: enter the name of the HTTP proxy
server.
GPRS only: the phone only works in GPRS
networks.
GSM setting: you can change the proxy settings
for the GSM network.
GSM only: the phone only works in GSM networks.
Gateway: enter the IP Address and IP Port
Data call type: select a network connection type;
ISDN or Analogue.
Current proxy (Menu 7.1.6)
Dial number: enter the PPP server phone number.
Login ID: enter the PPP server login ID.
This menu option allows you to activate one of the
proxies you set up to use the WAP connection.
Password: enter the PPP server password.
Push messages (Menu 7.1.7)
GPRS setting: you can change the proxy settings
for the GPRS network.
This menu allows you to set to be received and read
push messages.
Gateway: enter the IP Address and IP Port.
The following options are available:
APN: enter the access point name used for the
address of the GPRS network gateway.
Inbox: Your phone receives push messages and
saves them in Inbox. And you can read push
messages in Inbox.
Login ID: enter the user ID required to connect to
the GPRS network.
Setting: This option allows you to set the push
message receiving options.
Password: enter the password required to connect
to the GPRS network.
Always: always push message comes in.
Never: the push message never comes in.
Home URL: you can change the address of your
startup homepage.
When the default homepage displays, you can
delete it using the C key and enter your own choice.
To enter any special characters, / for example, use
the Symbolic mode; see page 48.
Optional: Push messages whose sending matches
to the number in this option comes in. The preset
number is SMS service centre. You can also edit the
number.
Bearer: you can select the bearer to be used for
Delete all: deletes all of the push messages.
each type of network accesses.
136
137
Fun Box
Fun Box
Delete All (Menu 7.2.3)
Media box (Menu 7.2)
This option deletes all of the images and sounds in
the Media box.
This menu option stores various media items from
other sources, such as the WAP sites, the
EasyStudio PC software or multimedia messages.
Images: Press the Yes soft key to delete it,
otherwise press the No soft key.
Images (Menu 7.2.1)
Sounds:
This option allows you to view the images extracted
from EMS or MMS, downloaded from WAP sites, the
EasyStudio PC software or multimedia messages.
1. Scroll to a sound box and place a check mark
ahead it by pressing the Select soft key.
To view the image, press the View soft key.
Selecting All places check marks on all of the
boxes.
When you view a photo, press the Options soft key
to do the followings.
2. If necessary, repeat step 1 to check another
box.
Send: allows you to send it via message.
Rename: allows you to rename it.
Delete: allows you to delete it.
3. When you have finished checking, press the Ok
soft key.
4. When a confirming message appears, press the
Yes soft key to delete all of the sounds in the
box(es).
Set as wallpaper: allows you to set it as a
wallpaper.
Properties: allows you to view the detail
information of the photo.
Otherwise, press the No soft key.
Sounds (Menu 7.2.2)
Memory Status (Menu 7.2.4)
This option allows you to listen to the recorded
voices and the melodies received from other
sources, such as the WAP sites or multimedia
messages.
Media box and multimedia message boxes share a
given amount of memory in your phone.
The display shows the percentage of memory used
by user and phone and the number of MMS saved in
your phone.
Voices: allow you to listen to the recorded voices.
My sounds: allow you to listen to various melodies.
When you have finished checking your memory,
press the
previous menu.
soft key or the C key to go to the
When you select a sound, press the Options soft
key to send, rename, delete, set as a ringtone (only
in My sounds) or view the properties.
138
139
Fun Box
Fun Box
SnowBallFight
JAVA World (Menu 7.3)
The goal of this game is to challenge and defeat the
snowball fight champions of four different teams.
You can download MIDlets (Java applications
running on mobile phones) from various sources
using the WAP Browser and store them in your
phone.
Accessing a game
After loading the game, press any key twice to go
to the first menu screen. At the first menu screen,
Downloads (Menu 7.3.1)
press
key to play a game, or press
key to
access the main menu of this game.
A list of Java games is displayed. In basic, two pre-
loaded MIDlets (Java games) are provided. If the
list of Java games is empty, a pop up message is
displayed to invite to download a new game. To add
MIDlets to the list, you can download MIDlets from
the Web sites.
Play: allows you to start a new game or a saved
game. Saved game allows you to continue the
beginning of last stage you played.
Instructions: shows you the explanation of control
keys, offense items and defense items.
To
Press the
Configuration: allows you to turn the sound,
vibration on or off and select the game speed from
1 to 5.
find a game
run a game
Up or Down key.
Launch soft key.
Info soft key.
Quit: quits the game and returns to the downloads
menu screen.
view detail
information
Playing a game
Move the character along the street using the
navigation key. If you have enough gold coins which
you can earn while fighting to buy items, you can
buy defense items at the drug store and offense
items at the item shop. Move the character to the
delete the game
Delete soft key in the
information display.
team of current stage and press
key to select it.
When the snowball fight game starts, hit the rival
kids with snowballs and avoid theirs. While fighting
you can use items you have. If you raise enough
mana, you can also use special attack. You should
win all fights in four stages in order to challenge the
champions of the snowball fight.
140
141
Fun Box
Fun Box
Key Commands
Continue: allows you to continue the last game
you played. The menu is only available when a
game has already been played.
4/6 or Left/Right: move left or right
2, 5, Up or
:control the distance at the first
High score: shows you the high score table.
press and throw the snowball at the next press.
How to play: shows you the instruction of this
game.
8, Down: use the special attack depending on your
mana
Option: allows you to set the sound on or off
3: enters item mode to use your item, select the
item you want to use by pressing 2, 5, Up or
key.
Playing a game
Your score goes up when you remove the bubbles.
Only when more than 3 same coloured bubbles line
up horizontally or diagonally, they disappear. To line
up the bubbles, move the band rounding three
bubbles to suitable place and rotate it. When the
game is over, your score is ranked on the high score
board if it is within third.
Special attacks
Level 1: Aurora, all enemies are hit by a snowball.
Level 2: Ice dragon, all enemies are hit by a
snowball and frozen for 8 seconds.
Level 3: Icicle storm, double powered snowball
attack to all enemies and decreasing enemies’
attack accuracy for 10 seconds.
Key Commands
2, 4, 6, 8, or navigation key: move the band up,
down, left or right
BubbleSmile
1: rotate the bubbles in the band counterclockwise
3: rotate the bubbles in the band clockwise
BubbleSmile is a arcade puzzle game.
Accessing a game
DNS setting (Menu 7.3.2)
After loading the game, you will see the following
options, press
key to select one of them:
The DNS (Domain Name Server) address to connect
the Java server is automatically set when making
data call set up. The address is provided by the
network operator automatically, but you can change
it manually at this menu.
Start game: allows you to start a new game with
timed mode or skilled mode.
• Timed mode: you have to achieve the best score
before gauge disappear at the time bar. When
you get the same coloured bubble together,
gauge at the time bar increases.
Memory status (Menu 7.3.3)
• Skilled mode: you have to make more than 4
bubbles disappear at once for the gauge at the
skill bar increase. If 3 or none of bubbles
disappear, then the gauge decreases.
You can check the memory for Java download. The
display shows the percentage of memory used by
user and phone.
142
143
Using ALS (Alternate Line Service)
Using ALS (Alternate
Line Service)
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make
and receive calls on either line. If you subscribe to
this network service, a few additional menu options
enable you to set up this feature.
Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring tone for each
line via the Incoming calls menu option (Menu
3.1). See page 96 for further details.
Setting Call Diverting Options
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to ALS.
You can set up call diverting via the Call diverting
menu option (Menu 6.1). This service reroutes
incoming calls on the line of your choice to a
specified number. For further details, see page 123.
Selecting a Line
You can select a line for each call via the Active
line menu option (Menu 6.6). For further details,
refer to page 130.
Viewing Call Information
You can view call times and last call cost
information for each line. For further details, see
page 94
Editing the Line Name
You can edit the name of each line via the Own
number menu option.
When you edit the name of a line, this name
replaces “Line 1” or “Line 2”, as applicable. For
further details, refer to page 65.
144
145
Solving Problems
Solving Problems
Before contacting the after-sales service, perform
the following simple checks. They may save you the
time and expense of an unnecessary service call.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
You have entered a number but it was
not dialled
When you switch your phone on, the
following messages may appear
• Have you pressed the
key?
No SIM card
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Check that the SIM card is correctly installed.
Phone locked Enter password
Your correspondent cannot reach you
The Phone lock feature is enabled. You must enter
the phone’s password before you can use the
phone.
• Is your phone switched on (the
for more than one second)?
key pressed
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
Your correspondent cannot hear you
speaking
• The PIN check feature is enabled. Every time the
phone is switched on, you must enter the PIN. To
disable this feature, use the PIN check menu
option (Menu 4.4.1). See page 103.
• Have you switched off the microphone (Mute
appears)?
• Are you holding the phone close enough to your
mouth? The microphone is located at the bottom
of the phone.
Enter PUK
The PIN was entered wrongly three times in
succession and the phone is now blocked. Enter the
PUK supplied by your network operator.
The phone starts beeping and “Battery
Low” flashes on the display
The battery is insufficiently charged. Replace the
battery and recharge it.
“No service” displays
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded
by buildings). Move and try again.
146
147
Solving Problems
Access Codes
The audio quality of the call is poor
There are several access codes that are used by
your phone and its SIM card. These codes help you
protect the phone against unauthorised use.
• Check the signal strength indicator on the display
(
); the number of bars indicates the signal
strength from strong ( ) to weak ( ).
Some access codes can be changed using the
Security menu option (Menu 4.4). See page 102
for further details.
• Try moving the phone slightly or moving closer to
a window if you are in a building.
No number is dialled when you recall a
Phonebook entry
Phone Password
• Check that the number has been stored correctly,
by using the Phonebook Search feature.
• Re-store them, if necessary.
The Phone lock feature (see page 103) uses the
phone password to protect your phone against
unauthorised use.
If the above guidelines do not help you to solve
the problem, take a note of:
The phone password is supplied with the phone and
is preset to “00000000” at the factory. To change
the password, use the Change password menu
option (Menu 4.4.4). See page 104.
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung
after-sales service.
PIN
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. It is
usually supplied with the SIM card. When the PIN
Check feature is enabled (see page 103), you must
enter the PIN each time you switch on the phone.
If you key in an incorrect PIN three times in
succession, key in the PUK and press the Ok soft
key to unlock the phone. Key in a new PIN and
press the Ok soft key. Key in the new PIN again and
press the Ok soft key.
148
149
Access Codes
Access Codes
PIN2
PUK2
The PIN2, supplied with some SIM cards, is required
to access some functions, such as charging unit
counters. These functions are only available if
supported by your SIM card.
The PUK2, supplied with some SIM cards, is
required to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press the Ok soft
key to unlock the phone. Key in a new PIN2 and
press the Ok soft key. Key in the new PIN2 again
and press the Ok soft key.
You cannot change the PUK2. If you lose the code,
contact your service provider.
Call Barring password
PUK
The 4-digit call barring password is required when
you use the Call Barring function. You obtain the
password from your service provider when you
subscribe to this function.
The PUK (PIN Unblocking Key) is required to change
a blocked PIN. The PUK may be supplied with the
SIM card. If not, contact your local service provider.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
You can change this password using the Change
barring password menu option (Menu 6.2.7).
For further details, see page 127.
You cannot change the PUK. If you lose the code,
contact your service provider.
150
151
Health and Safety Information
Health and Safety
Information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as
to use only the power required to reach the
Exposure to Radio-Frequency Energy
(SAR Information)
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
network. In general, the closer you are to a base
station, the lower the power output of the phone.
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured, so as not
to exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
The highest SAR value for this model phone when
tested for compliance against the standard was
0.711W/kg. While there may be differences
between the SAR levels of various phones and
various positions, they all meet the EU
requirements for RF exposure.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
The exposure standard for mobile phones employs
a unit of measurement known as SAR (Specific
Absorption Rate). The SAR limit recommended by
the EU Council is 2.0W/kg.*
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Battery charging time depends on the remaining
battery charge and the type of battery and
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time
(talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
* The SAR limit for mobile phones used by the public is
2.0 watts/kilogram (W/kg) averaged over ten grams of
body tissue. The limit incorporates a substantial margin
of safety to give additional protection for the public and
to account for any variations in measurements. The SAR
values may vary depending on national reporting
requirements and the network band.
152
153
Health and Safety Information
Health and Safety Information
• If left unused, a fully charged battery will
discharge itself over time.
Road Safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, practice good common
sense and remember the following tips.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• Do not leave the battery in hot or cold places,
such as in a car in summer or winter conditions,
as you will reduce the capacity and lifetime of the
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
1. Get to know your wireless phone and its
features, such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
2. When available, use a hands-free device. If
possible, add an extra layer of convenience and
safety to your wireless phone with one of the
many hands-free accessories available today.
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
3. Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your
voice mail answer it for you.
4. Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice and even heavy traffic can
be hazardous.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
5. Do not take notes or look up phone numbers
while driving. Jotting down a To Do list or
flipping through your Phonebook takes your
attention away from your primary responsibility,
driving safely.
154
155
Health and Safety Information
Health and Safety Information
6. Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your
car will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
Operating Environment
Remember to follow any special regulations in force
in any area and always switch off your phone
whenever it is forbidden to use it, or when it may
cause interference or danger.
7. Do not engage in stressful or emotional
conversations that may be distracting. Make the
people with whom you are talking aware that
you are driving and suspend conversations that
have the potential to divert your attention from
the road.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it
is a free call on your wireless phone!
9. Use your wireless phone to help others in
emergencies. If you see a car accident, crime in
progress or other serious emergency where lives
are in danger, call the emergency number, as
you would want others to do for you.
Electronic Devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
10.Call roadside assistance or a special non-
emergency wireless assistance number when
necessary. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal,
a minor traffic accident where no one appears
injured, or a vehicle you know to be stolen, call
roadside assistance or any other special non-
emergency wireless number.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
156
157
Health and Safety Information
Health and Safety Information
Persons with pacemakers:
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
• should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone
is switched on
Posted Facilities
Switch off your phone in any facility where posted
notices require you to do so.
• should not carry the phone in a breast pocket
• should use the ear opposite the pacemaker to
minimise potential interference
Potentially Explosive Atmospheres
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
Switch off your phone when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Hearing Aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
Other Medical Devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch off your phone
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
158
159
Health and Safety Information
Health and Safety Information
Emergency Calls
Other Important Safety Information
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
• Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
emergencies, for example).
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
To make an emergency call, proceed as follows.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 112 or any other official
emergency number). Emergency numbers vary
by location.
• Switch off your phone before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
3. Press the
key.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
Care and Maintenance
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
160
161
Health and Safety Information
Glossary
To help you understand the main technical terms
and abbreviations used in this booklet and take full
advantage of the features of your mobile phone,
here are a few definitions.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
ALS (Alternate Line Service)
Capability of associating two lines with one SIM
card. With this service, you can make and receive
calls on either line, as required.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
Call Barring
Ability to restrict outgoing and incoming calls.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
Call Diverting
Ability to reroute calls to another number.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
Call Waiting
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
Ability to inform users that they have an incoming
call when engaged on another call.
• Use only the supplied or an approved
CLI (Caller Line Identification) Services
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
Services allowing subscribers to view or block the
telephone numbers of callers.
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
162
163
Glossary
Glossary
EMS (Enhanced Message Service)
MMS (Multimedia Message Service)
Network service sending and receiving messages
that include images, sounds and animations to and
from another user without having to speak to the
correspondent.
A message service for the mobile environment,
standardized by the WAP Forum and the 3rd
Generation Partnership Program (3GPP). For phone
users, MMS is similar to Short Message Service
(SMS)-it provides automatic, immediate delivery of
user-created content from phone to phone. The
message addressing used is primarily phone
numbers, thus the traffic goes from phone to
phone. MMS also provides support for e-mail
addressing, so that messages can also be sent by
e-mail. In addition to the text content of SMS, MMS
messages can contain still images, voice or audio
clips, and later also video clips and presentation
information.
GPRS (General Packet Radio Service)
New non-voice value-added service that allows
information to be sent and received across a mobile
telephone network. GPRS guaranties continuous
connection to the Internet for mobile phone and
computer users. It is based on the Global System
for Mobile Communication (GSM) circuit-switched
cellular phone connections and the Short Message
Service (SMS).
Multiparty Calling
GSM (Global System for Mobile
Communication)
Ability to establish a conference call involving up to
five additional parties.
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorised use. The PIN is supplied by the
service provider with the SIM card. It may be a four
to eight-digit number and can be changed, as
required.
IrDA(Infrared Data Association)
A standard defined by the IrDA consortium. It
specifies a way to wirelessly transfer data via
infrared radiation. The IrDA specifications include
standards for both the physical devices and the
protocols they use to communicate with each other.
PUK (PIN Unblocking Key)
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Roaming
Use of your phone when you are outside your home
area (when travelling for example).
164
165
Glossary
SDN (Service Dialling Numbers)
Telephone numbers supplied by your network
provider and giving access to special services, such
as voice mail, directory inquiries, customer support
and emergency services.
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and
memory information, as well as the subscriber’s
personal data). The SIM card fits into a small slot
on the back of the phone and is protected by the
battery.
SMS (Short Message Service)
Network service sending and receiving messages to
and from another subscriber without having to
speak to the correspondent. The message created
or received can be displayed, received, edited or
sent.
Soft Keys
Two keys marked
purpose of which:
and
on the phone, the
• varies according to the function that you are
currently using
• is indicated on the bottom line of the display just
above the corresponding key
Voice Mail
Computerised answering service that automatically
answers your calls when you are not available,
plays a greeting (optionally in your own voice) and
records a message.
166
167
168
|