Samsung MyShot™ II
( S C H - R 4 6 0
P O R T A B L E
M O B I L E
S e r i e s )
T R I - B A N D
P H O N E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
Openwave is a registered Trademark of Openwave, Inc.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
™
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
®
1
2
FCC Hearing-Aid Compatibility (HAC) Regulations for
3
Section 1: Getting Started
This section explains how to start using your Samsung
MyShot™ II phone by activating your service, setting up your
Voicemail, or getting an understanding of how this manual is put
together.
•
Important: Points out important information about the current feature
that could affect performance, or even damage your phone.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this guide generally follow the same order as the
menus and sub-menus in your phone. A robust index for quick
reference to most features begins on page 147.
highlight UsetheNavigationkey(
)tomoveahighlighting
effect onto a menu item or screen item of interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 119.
select
After “highlighting” a menu item or screen item,
press the OK key
to launch, access, or save a
highlighted menu item or screen field of interest.
Notes and Tips
➔
Used in place of “select” in long “drill down”
procedure steps.
Throughout this guide there is text that is set apart from the rest.
These are intended to point out important information, quick
methods for activating features, to define terms, and more. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
•
Notes: Explain alternative options within the current feature, menu, or
sub-menu.
Installing the Battery
•
Tips: Provide quick or innovative methods for performing functions
related to the subject at hand.
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Getting Started
4
3. Lift the battery (3) up and
away from the phone, bottom
end first.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery.
1. Insert the top end of the
battery first, matching the
gold contacts on the inside of
the battery to those on the
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
2. Press lightly on the bottom end of the battery down into the
phone until it slips into place.
3. Press lightly down (1) and
upward on the battery cover
until it clicks into place.
Use the Travel Adapter
The travel adapter included
with your phone is a
convenient, light-weight
Remove the Battery
1. Press and hold the
key
charger that rapidly charges
your phone from any 120/220 VAC outlet.
to turn off the phone (if on).
1. Plug the large end of the Travel Adapter into a standard
2. Press the battery cover
downward (1) and lift the
cover (2) up and away from
the phone.
120 VAC or 220 VAC wall outlet.
5
If you continue to use your phone without charging its battery, the
phone will shut down.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
2. Insert the smaller end of
the Travel Adapter into the
charger/accessory
Turn Your Phone On
1. Open the flip on your phone,
as shown.
connector on the lower
left side of your phone.
Correct
Incorrect
2. Press
.
Important!: You must unplug the adapter before removing the battery from
Note: As with any other radio-transmitting
device, do not touch the antenna
while using your phone as this can
affect call quality and can cause the
phone to operate at a higher power
level than is necessary.
the phone during charging to avoid damage.
Low Battery Indicator
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
3. The phone begins searching
Press
for a network signal.
•
•
•
Five bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
) and a tone sounding indicate you
4. Once the phone finds a signal,
the time, date, and day
A blinking empty battery icon (
have two to three minutes before the battery is too low to operate the
phone.
appear in the second line of the display.
5. You’re now ready to place and receive calls.
Getting Started
6
Listen to Voicemail
1. In standby mode, press and hold
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
or dial your own
cannot place or receive calls, try later when service is available, or at
another location.
mobile number to dial Voicemail. After connecting, you will
hear your voice greeting.
Turn Your Phone Off
2. You are prompted to enter your password.
ᮣ
Press and hold
powers off.
for two or more seconds. Your phone
Memory Card (Optional)
Your phone has a Memory Card slot on its lower right side. You
can install a microSD card to provide additional memory for
storing files (such as, sound files, music, and photos) in your
phone.
™
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Install a Memory Card
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
1. Open the Memory Card slot cover on the lower right side of
your phone.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
7
2. Insert the Memory Card — label side facing up and
smaller end pointing toward the phone — into the Memory
Card slot.
Remove a Memory Card
1. Open the Memory Card slot cover on the lower right side of
your phone.
2. Press the Memory Card up into the slot until the card lock
releases.
3. Remove the Memory Card from the Memory Card slot.
5. Replace the Memory Card slot cover.
Incorrect
Correct
3. Press the Memory Card up into the slot until the card locks
into place.
4. Replace the Memory Card slot cover.
Getting Started
8
Section 2: Understanding Your Phone
This section outlines some key features of your Samsung
MyShot™ II phone. It also describes the screen format and the
icons that will be displayed when the phone is in use.
Closed View of Your Phone
Features of Your Phone
Domestic and international voice and text messaging service (available
on participating networks).
4
•
1
•
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 1x Technology)
5
6
7
®
2
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
Digital Assistant Functions
Picture (MMS) Messaging
Text (SMS) Messaging
3
E-mail Messaging
Built-in 1.3 Megapixel Digital Camera
Voice Dial
Features
1. Headset Connector — Used to connect an optional headset
Note: The MyShot phone supports the wireless handsfree, A2DP (Advanced
Audio Distribution Profile), phonebook access, object push, and file
transfer profiles for Bluetooth® wireless technology.
(for hands free operation) or an optional TTY device.
2. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
9
3. Power / Accessory Connector — Used to connect charging
Open View (Front) of Your Phone
accessories or optional accessory cables to your phone.
1
4. Camera Lens — The lens of your built-in camera.
5. Front Display — Indicates the status of your phone,
including status icons, message indicators, signal
strength, and so on.
2
6. Camera Key — With the flip open or closed, press and
hold, then release to launch the Music Player or press and
hold to launch the Camera.
16
3
4
5
15
14
7. Memory Card Slot — Used to plug in an optional
microSD™ memory card for additional multimedia file
storage.
13
12
6
7
11
10
9
8
Features
1. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
Understanding Your Phone
10
2. Main Display — Indicates the status of your phone,
including numbers dialed, feature and function screens,
status icons, message indicators and contents, signal
strength, and so on.
10. Voice Recognition Key — Used to launch VoiceSignal voice
recognition system.
11. Alpha-numeric Keys — Use these keys to enter numbers,
letters, and characters.
3. OK Key — Pressing when navigating through a menu
12. END Key — Ends a call. If you press and hold the END key,
the power goes On or Off. When you receive an incoming
call, press to send the call to voicemail.
accepts the highlighted choice in a menu.
4. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
13. CLR Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
5. Speakerphone Key — Enables/disables speakerphone
mode.
6. SEND Key — Lets you place or receive a call. In standby
14. MP3 — Used to launch the Music Player.
mode, press the key once to access the recent calls log.
15. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
7. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
8. Special Function Keys — Enter special characters. Perform
16. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
various functions.
9. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
11
•
When the OK key function is Edit, press the Edit key (
Draft message.
) to edit a
Command Keys
Functions for the soft keys are defined by what appears above
each in the display. There are two soft keys, Left ( ) and Right
Send Key
(
).
The Send key (
) is used to answer calls, dial calls, and to
Left Soft Key
recall the last number(s) dialed, received, or missed.
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
once to answer calls.
Some functions of the Left soft key ( ) are as follows:
to make a call.
•
In standby mode, press the Menu soft key ( ) to open the Main
Menu.
•
When the Left soft key function is Edit, press the Edit soft key ( ) to
•
•
Press
Press
twice in standby mode to call the most recent number.
edit a Contacts entry.
to pick up a waiting call. Press
again to switch back
Right Soft Key
to the other call.
Some functions of the Right soft key ( ) are as follows:
Clear Key
•
•
•
In standby mode, press the Contacts soft key ( ) to launch the
Contacts Find screen.
When the Right soft key function is Options, press the Options soft key
The Clear key (
) is used to erase or clear numbers, text, or
symbols from the display. You can also use the key to return to a
previous menu or to return to standby mode from any menu.
(
) and a pop-up menu appears.
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
When the Right soft key function is Back, press the Back soft key (
)
to back up one menu level.
•
•
To erase the entire sentence, press and hold
.
OK Key
To back up one menu level, briefly press
.
•
In a menu, press
to accept the highlighted selection.
to take a photo or to create a Picture
End Key
•
In camera mode, press
message.
•
Press and hold the End key (
Briefly press once to disconnect a call.
Understanding Your Phone
) to turn your phone on or off.
•
12
•
Press
to return to standby mode from any menu, or to cancel the
2. The center portion of the main display shows information
last input.
such as call progress information, messages, and photos.
Navigation Key
3. Calendar and Clock display — Displays the current day,
Use the directional keys on the Navigation key (
) to browse
date, and time.
menus, sub-menus, and lists. Each directional key also acts as a
shortcut to launch applications.
4. Widget menu — Scrollable (using the Right and Left
navigation keys) menu of Widgets. Selecting a Widget
launches the associated feature, function, or application.
Camera Key
ᮣ
In standby mode, press and hold, then release
activate the camera built into your phone and to take
to
5. The bottom line of the main display shows current soft key
functions.
The sample screen shows that pressing the Left soft key
(
) will display the Main Menu, and pressing the Right
Understanding the Display Screens
soft key ( ) will show the Contacts Find screen.
Main Display
1
External Display
1. The top line of your
2
Your phone has an external display on the
outside of the flip. When you close the
phone, the external display shows a digital or
analog clock. (For more information, refer to
phone’s main display
contains icons that
indicate network status,
battery power, signal
3
strength, connection type,
4
and more.
5
13
Display Screen Icons
•
Warning
Example: “Low Battery,” “Memory Full!”
–
Your MyShot phone can show you definitions of the icons that
appear on the top lines of the front and main displays. To access
the Icon Glossary:
Backlights
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
ᮣ
In idle mode, press Menu
➔
Settings
➔
Phone Info
➔
Icon
Glossary. A list shows of the icons that can appear on the
top lines of the displays.
Dialogue Boxes
Note: During a phone call, the display backlight dims and turns off after 7
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
seconds to conserve battery power, regardless of the Backlight setting.
Your Phone’s Modes
Standby Mode
•
•
•
•
•
•
Choice
–
Example: “Save message?”
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
Reconfirm
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
Example: “System Error!”
•
•
After you power the phone on.
When you press after a call or from within a menu.
–
In standby mode, you will see the time, day, and date as well as
all phone status icons.
–
Place Calls in Standby Mode
–
1. While in standby mode, enter a phone number, and press
to place a call.
–
Understanding Your Phone
14
2. Press
to return to standby mode.
Tip: You can also enter the Volume
Settings Sound Settings
the left side of your phone to adjust the ringer volume setting.
>
Voice Calls sub-menu by pressing Menu
➔
➔
➔
Master Volume. Use the Volume key on
Receive Messages in Standby Mode
You can receive messages in standby mode. An alert tone sounds
and a notification message appears in the display when a new
message arrives. The following call message options appear:
Note: The Vibrate icon (
) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
) appears in the display when
the phone is in Vibrate/High mode.
•
•
View Now — This selection allows you to view the messages now.
View Later — This selection allows you to view the messages at a
later date.
Call Answer Mode
You can choose to answer a call by pressing any key except
or , by pressing only , or by opening the
Highlight the desired viewing option and then press
.
Adjust the Ringer
In standby mode, press the Volume key (on the left side of the
phone) up or down.
Talk Mode
1. In standby mode, press the Volume key up or down to set
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
the call ringer volume as desired.
Options are:
• Silence All
• Vibrate
• Low
• Medium
• Medium/High
• High
Enter/Exit Silent Mode
Silences the tones your keypad makes when you press a key.
• Low/Medium
• Vibrate/High
To enter Silent Mode:
When you are satisfied with the setting, press SET. Your phone
returns to standby mode.
ᮣ
In standby mode, press and hold
. “Entering Silent
Mode” briefly appears in the display and your phone
15
returns to standby mode.
Handsfree Mode
Handsfree mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
To exit Silent Mode:
ᮣ
While in Silent mode and standby mode, press and hold
. “Exit Silent Mode” briefly appears in the display and
your phone returns to standby mode.
To place your phone in Handsfree mode, do one of the following:
•
Connect an optional wired headset.
– or –
Vibrate Mode
•
Pair and connect an optional Bluetooth technology headset or
In standby mode, repeatedly press the Volume key
(
) down until “Vibrate” appears in the display.
Camera Mode
The Volume key is on the left side of phone.
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
Speakerphone Mode
Speakerphone mode lets you use your phone handsfree and/or
share calls with others.
•
Entering Speakerphone Mode — In standby mode, press and hold
the Speakerphone key ( ) — below the left soft key.
Exiting Speakerphone Mode — In Speakerphone mode, press and
hold the Speakerphone key ( ).
•
Entering Camera Mode — In standby mode, press and hold the
Camera key ( ) — on the right side of the phone.
Exiting Camera Mode — Press
•
•
.
Note: You can also enter Camera mode by pressing Menu
Camera
➔
Multimedia
➔
.
Understanding Your Phone
16
Input mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are T9 Word Abc, ABC, 123,
,
Tip: You can cycle between T9 Word
,
Abc, and 123 by repeatedly pressing
and holding the key until the phone beeps.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
ᮣ
Unlock your phone by pressing the Unlock soft key and
entering the lock code when prompted. (For more
Note: The default lock code is the last four digits of your telephone number.
17
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number you wish to call using
the keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
2. Press
to place the call.
Dialing International Numbers
1. In standby mode, enter 011 (the three-digit exit code for
the United States).
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Enter the country code for the country that you are calling.
2. Press
to place the call.
3. Enter the number that you wish to call, then press
.
You can specify other numbers as emergency numbers using the
Note: Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Call Functions
18
Manual Pause Calling
Note: If you select 2-Sec Pause, P appears in the display. If you select Wait,
W appears in the display.
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
5. Press
to call the number.
Making a Call — Contact Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. To call one of your Contacts, do the following:
•
2-Sec Pause — P pause — A two-second pause stops the calling
sequence for two seconds and then automatically sends the remaining
digits.
1. Press the Contacts soft key. The Contacts Find screen
appears in the display.
•
Wait — W pause — A hard pause stops the calling sequence until you
press
.
Contacts list displays the first few entries with names
matching the letters you entered.
To manually call a number with pause(s) without storing it to your
Contacts:
1. Enter the number you wish to call.
2. Press the Options soft key. A pop-up menu containing the
3. Highlight the Contact you wish to call and press
following options appears in the display:
•
•
2-Sec Pause — a two-second pause.
Wait — a hard pause (awaits input from you).
3. Highlight the desired pause option.
4. To enter the highlighted pause into your number sequence,
press
.
19
Three-Touch Dialing
Making a Call — Speed Dialing
You can store phone numbers and contact names in your phone’s
Contacts list. Speed Dialing lets you quickly and easily dial any
contact in your Contacts list by using that contact’s location
number in the list. You can assign and change location (speed
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Example: For location number 113, briefly press
, briefly press
again, then press and hold
until the name and number appear
in the display and the number is dialed.
Pause Dialing From a Contacts Entry
One-Touch Dialing
•
If you speed dial a contact that contains (two-second) P pause(s)
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
Example: For Speed Dial number 3, press and hold the
key until the
name and number appear in the display and the number is dialed.
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial any
number stored in your Contacts list by
pressing the number keys that correspond
to the first few letters of a Contact name.
Two-Touch Dialing
Memory locations 10 through 99 are special Two-Touch dialing
locations.
Example: For location number 13, briefly press
, then press and hold
until the name and number appear in the display and the number is
dialed.
Call Functions
20
Voice Dialing Tips:
Quick Search Dialing a Contact
•
•
Wait for the beep before speaking.
To find and dial a Contact, do the following:
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
1. In standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
•
When saying a name, say the first name then the last name.
2. Press the Up navigation key. The
Contact List screen appears
showing the desired Contact name,
as shown.
Dialing a Name
To dial a name, do the following:
1. In standby mode, press and hold
.
“Say a Command” appears in the display and is
3. If needed, use the Up and Down
navigation keys to highlight the
Contact you wish to call.
pronounced through the earpiece.
2. Say, “Call”.
You are prompted to “Say the name or #”.
4. Press
to call the highlighted Contact.
3. Speak clearly and say the name of a person in your
Making a Call — Voice Dialing
Your MyShot mobile phone includes state-of-the-art voice
Contacts list, first name followed by last name.
If the name is recognized, Voice Dial repeats the name and
dials the number.
recognition software that lets you dial numbers using your voice.
Using Voice Dial
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
21
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
2. Say “Call”.
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
•
•
Press the Repeat soft key to say the name again.
Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with
“Which number?”
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
5. Say one of the following number types:
•
•
•
“
Home
Work
Mobile
”
“
”
“
”
•
•
To say the name again, press the Repeat soft key.
To exit Voice Dial without dialing, press
Voice Dial dials the specified number.
.
Dialing a Number
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) T pause(s) simply
wait for the pauses to pass and the dialing to complete.
To dial a number using Voice Dial, do the following:
1. In standby mode, press and hold
.
•
If you voice dial a contact that contains (hard) P pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
“Say a Command” appears in the display and is
pronounced through the speaker.
Call Functions
22
number, bank account number, and so on) and enter the appropriate
response(s).
Tip: You can set your phone to answer calls automatically or when you press
any key but the
Answering a Call
Your phone notifies you of a call in the following ways:
The In-Use Options Menu
While in a call, you can access numerous menus and features.
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Silence All Vibrate Low
Low/Medium Medium Medium/High High, or Vibrate/High
and/or different ring types to distinguish callers.)
,
,
,
,
,
,
,
Note: If the call is disconnected while you are accessing an In-Use Option,
the In-Use Option disappears from the display, and the phone
eventually returns to standby mode.
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
1. While in a call, press the Options soft key.
The following menu items appear in the display:
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
•
•
Contacts — The Contacts Find screen appears in the display.
• Recent Calls — Launches the recent calls portion of the All Calls
page 24.)
• Connect Bluetooth — Connect your handset to another Bluetooth
device, such as a headset. (For more information, refer to
– You answer the call.
– You ignore the call.
– The calling party ends the call.
– The call is sent to voicemail.
Answering an Incoming Call
•
•
Send DTMF — Send your phone number as DTMF tones.
ᮣ
Slide your phone open, if closed, or press
. The ring
tone and/or vibration stop and the caller’s voice can be
heard in the earpiece.
2. Do one of the following:
23
•
•
Select the desired sub-menu or feature.
Exit the menu by pressing
Review Recent Calls
.
The Recent Calls list shows the 30 most recent calls from the All
Calls log.
Tip: You can block/restore sound going to the other parties on this call by
pressing the Mute / Unmute soft key. This can reduce noise on
conference calls.
To access the Recent Calls list:
ᮣ
In standby mode, press
in the display, listing the 30 most recent calls.
To call the most recent called or calling number:
In standby mode, press twice in quick succession.
. The All Calls screen appears
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
ᮣ
ᮣ
During an incoming call, press the Ignore soft key. The
The phone dials the number associated with the most
recent call.
caller is forwarded to your voice mail.
Adjusting the Call Volume
In standby mode, repeatedly press the Volume key (
Review the Calls Log
)
1. In standby mode, press the Menu soft key, then select
Recent Calls. The following Calls logs and options appear
in the display:
down until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls. Plus, you can place calls or send
messages to numbers associated with log entries, and you can
save these numbers to your Contacts list.
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
• Data Counter
Call Functions
24
2. Select the Calls log that you wish to review or the function
3. Press the Options soft key. A pop-up menu containing the
you wish to access.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
•
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Home Outgoing, Home Incoming, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
4. Press the Msgs soft key to launch the Send Message
menu. The following options appear in the display:
Note: To quickly view your most recent calls, briefly press
in standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls appear in the display.
•
Text Message — Lets you send a text message to the selected
number called.
•
Picture Message — Lets you send a picture message to the
selected number called.
1. At the Recent Calls menu, select Outgoing Calls. A list of
your outgoing calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view the Name
of the called party (if in the Contacts list), the number
dialed, the time and date the call was placed, and the
duration of the call (in minutes and seconds).
5. Select the desired message type to compose a message.
Incoming Calls
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
25
Incoming call log for the time and date of the call, as well as
other information.
•
Picture Message — Lets you send a picture message to the
selected calling number.
1. At the Recent Calls menu, select Incoming Calls. A list of
your Incoming calls appears in the display.
5. Select an option to perform its function.
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
Missed Calls
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
1. At the Recent Calls menu, select Missed Calls. A list of
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
Erase — Erase the selected call from your Incoming calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Incoming calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
your missed calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view the Name
of the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
•
•
•
•
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
4. Press the Msgs soft key. The following options appear in
the display:
•
•
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
•
Text Message — Lets you send a text message to the selected
calling number.
Call Functions
26
•
•
Erase All — Erase all calls from your Missed call log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
3. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
4. Press the Msgs soft key. The following options appear in
the display:
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, All Calls, Home Outgoing, Home Incoming,
Roaming Calls, Lifetime Calls.
•
Text Message — Lets you send a text message to the selected
called number.
Picture Message — Lets you send a picture message to the
selected called number.
•
4. Press the Msgs soft key. The following options appear in
the display:
5. Select an option to perform its function.
•
Text Message — Lets you send a text message to the selected
calling/called number.
All Calls
•
Picture Message — Lets you send a picture message to the
selected calling/called number.
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
1. At the Recent Calls menu, select All Calls. A list of all
5. Select an option to perform its function.
logged calls appears in the display.
2. Highlight a call, then press OPEN ( ) to view further
Call Timer
information about the call.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
27
Note: Call Timer is not for billing purposes.
Note: Although most call timers can be erased, the Lifetime call timer can
never be erased.
1. At the Recent Calls menu, select Call Timer. The
Data Counter
following timers appear in the display:
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
•
•
Last Call — View the duration of your last call.
Home Outgoing — View the duration of the total outgoing calls
made on your phone in your home area since the last erasure.
Home Incoming — View the duration of the total incoming calls
received on your phone in the home area since the last erasure.
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
Last Reset — View the time and date all timers were last reset.
Lifetime Calls — View the duration of all calls since your phone
was activated.
•
•
•
Note: Data Counter is not for billing purposes.
1. At the Recent Calls menu, select Data Counter. The
following options appear in the display:
•
•
•
•
•
Transmit — View the total amount of data transmitted by your
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
Total — View the total amount of data sent or received by your
phone since the last reset.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
3. To reset all counters except Lifetime Calls, press the Reset
All soft key.
4. To exit the Call Timer list, press
or
.
Call Functions
28
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
3. To reset all counters except Lifetime Data Counter, press
•
Home only — Your phone is available for normal operation only in the
designated coverage area.
the Reset All soft key.
4. To exit the Call Timer list, press
or
.
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
Note: Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your r420 phone when you travel outside of
your Wireless Provider’s coverage area. The Roaming icon
(
) appears in the top line of the display when Roaming is
active, and extra charges may apply when making or receiving
calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
29
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
Return to the Previous Menu
•
Press the Right soft key Back to return to a previous menu.
•
When Back does not appear in the display, press
to return to
Menu Navigation
the previous menu.
Navigation Key Shortcuts
In standby mode, press a navigation key to launch the key’s
corresponding application.
Access the menus and sub menus in your phone using the
navigation key (
) and soft keys (
), or use a shortcut.
1. In standby mode, press the Menu soft key. The first of
several menus appears in the display.
Messages
Note: More than one menu may appear in your display. This setting can be
modified in the Display/Menu Style menu.
Browser
Tip: You can launch any of the Main Menus by using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
Navigate Using a Shortcut
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to Browser” to access the Browser
menu.
You can also access menus and sub menus using menu
numbers. After pressing the Menu soft key, press the menu
number to go directly to the menu or sub menu of your choice.
Before you can navigate using a shortcut, you’ll need the menu
or sub-menu number that you wish to access.
2. Use the navigation key to browse through the menus.
3. To enter the menu or sub menu that appears in the display,
press
.
1. In standby mode, press the Menu soft key. The Main Menu
4. Press the Back soft key to return to the previous menu.
appears in the display.
Menu Navigation
30
2. Press the number of the menu, sub menu, and so on for
2. Press the Down navigation key. The
Menu List screen appears showing
the matching menus and/or menu
items, as shown.
the feature that you wish to access.
Example: Press the Menu soft key, then press
,
. This takes you to
the Tools menu (Menu 7), and then to the Calendar (sub menu 2).
3. Select the desired menu or menu
item. The associated screen appears
in the display.
Navigate Using Quick Search
Use the Quick Search feature to find a
menu or menu item by pressing the
number keys that correspond to the first
few letters of menu or menu item name.
Quick Search Accessing a Menu
To find and access a menu or menu item, do the following:
1. In standby mode, press the number keys that correspond
to the first few letters of the menu or menu item name, as
shown.
31
Section 5: Entering Text
This section outlines how to select the desired text entry mode
when entering characters using the phone keypad. This section
also describes how to use the T9 predictive text entry system to
reduce the number of key strokes needed to enter text.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
The current text entry mode (T9 Word Abc, ABC, 123, or Symbols)
,
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
is indicated in the lower part of a text entry screen. To change the
text entry mode while composing a text message:
ᮣ
Repeatedly press and hold
to toggle between Abc,
123, and T9Word modes.
•
T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
Or, do the following:
1. Press the Left soft key.
–
–
–
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
T9 word — Enter all lower case letters
2. Highlight one of the following text entry modes:
• T9Word
• Abc
•
Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
• ABC
• 123
–
–
–
Abc — Enter initial capital letters
ABC — Enter all upper case letters
abc — Enter all lower case letters
• Symbols
3. Press
.
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
Entering Text
32
®
As you press each key, the displayed letters change.
Using T9 Mode
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
When you complete the key sequence, T9 Word recognizes
that the most commonly used word for the key sequence
you just pressed is “Samsung.”
Note: To enter a space, press the
key. To enter a period, press the
1. While composing a text message, press the Left soft key,
then select T9Word
.
Adding Words to T9 Word
2. For practice, enter the word “Samsung” by pressing each
The T9 Word dictionary may not
contain an obscure word, such as the
latest technical jargon or slang. If you
find you cannot enter a particular
word in T9 Word mode, you can add
the word to the T9 Word dictionary.
of the following keys only once:
S
A
M
S
U
N
G
1. While composing message
T9 Word recognizes that the most commonly used word for
the numeric sequence you just entered is “Samsung.”
text or a text memo, press the
Left soft key, then select Add T9 Word. The Add T9 Word
screen appears in the display.
If more than one word shares the same numeric sequence,
T9 Word provides the most commonly used word. Press
to display other words, if available.
Note: The Add T9 Word screen is locked into Abc text entry mode.
Note: To enter a space, press the
key. To enter a period, press the
key. These key functions apply to both T9 Word and Abc modes. (For
2. Enter your new word using Abc text entry key sequences.
33
3. Press
you are returned to the message/memo text entry screen.
Using Abc Mode
1. While composing a text message, press the Left soft key,
then select Abc or ABC
. “T9 Word is Added” appears in the display and
Entering Symbols
Enter symbols such as “@” or “%” into a text message.
1. While composing a text message, press the Left soft key,
then select Symbols. The first of three symbol screens
appears in the display.
.
2. Use the Prev and Next soft keys to page through the other
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example: Press
once for “G” and twice for “H”.
Example: Press
for an exclamation point (!).
3. Pause briefly and the displayed character is accepted and
inserted into your message.
4. Repeat these steps to insert additional symbols into your
message.
4. To enter a space, press
. To enter a period, press
.
Entering Numbers
Enter numbers into a text message while in 123 mode.
1. While composing a text message, press the Left soft key,
then select 123
.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message.
Entering Text
34
Section 6: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
•
•
•
Speed Dial — Assign speed dial numbers to your Contacts.
Group — Rename one of your five Contacts groups.
Memory Info — View available memory for dial entries.
2. Select the Contacts sub-menu or option of your choice.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
Tip: You can also access a sub-menu or menu option by pressing the
number key corresponds to the menu item number. For example, press
to select Add New Contact.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
Adding a New Contacts Entry
You can add an new entry to your Contacts list or add information
to an existing entry.
Using the Contacts Add Option
1. In standby mode, press the Menu soft key, then select
Contacts ➔ Add New Contact. The Add New Entry
screen appears in the display with the Name field
highlighted.
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call
Open Your Contacts List
1. In standby mode, press the Menu soft key, then select
Contacts. The following Contacts sub-menus and options
appear in the display:
2. Enter a name or phrase to associate with the type using
•
•
Find — Find a phone number by entering a Contact name.
Add New Contact — Add a number or e-mail to your Contacts.
3. Use the Up/Down navigation keys to highlight each field.
35
4. Enter a phone number (Mobile, Home, or Work,) or an e-
Note: If the call was incoming and Caller ID information was unavailable,
mail address (E-Mail) for the new Contacts entry.
then the Save option is also unavailable.
5. If desired, assign the new Contact to a Group. This lets you
send messages to and find this Contact and other related
1. After you press
to end your call, the call time, length
of call, phone number, and name of the other party (if
available) appear in the display.
2. Press the Save soft key. The Save screen appears in the
6. If desired, select a unique Ringtone to identify this new
display showing the following options:
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
7. If desired, enter an additional phone number (Pager or
Fax) for the new Contacts entry.
Tip: You can also store a phone number from standby mode by entering the
number, and pressing the Save soft key.
8. If desired, choose an identifying image by highlighting the
photo ID field and pressing the Set soft key. The My
Creating a new Contacts entry:
3. Select Create New. The following (number type) icons
appear in the display:
9. Press SAVE ( ) to save the new Contacts entry.
Mobile
Work
Pager
Fax
Home
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
Understanding Your Contacts
36
4. Select the number type that matches your new entry. The
Add New Entry screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
9. Make any added changes you wish to the Contacts entry.
10. Press SAVE ( ) to save the entry.
Storing Number from a Calls Log
Adding the number to an existing Contacts entry:
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, press the Menu soft key, then select
Recent Calls. The following Calls logs appear in the display:
5. Select Update Existing. The Update Existing screen
appears in the display showing your current Contacts list.
6. Enter the first few characters of the Contacts entry name
under which you will store the saved number. (For more
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
• Call Timer
7. Select the desired Contacts entry. The following (number
• Data Counter
A list of your calls appears in the display.
type) icons appear in the Update Existing screen:
2. Highlight the number you wish to store in Contacts
.
Mobile
Work
Pager
Fax
Home
3. Press the Options soft key. The following options appear in
the display:
•
•
Save — Saves the selected number to your Contacts list.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
8. Select the appropriate unassigned number type. The Edit
Contact screen appears in the display.
•
Erase — Deletes the selected number from the selected Calls log.
37
•
Lock
/
Unlock — Prevents/allows deletion of the selected
“Say a Command” appears in the display and is
number.
pronounced through the speaker.
•
•
Erase all — Deletes all numbers from the selected Calls log.
View Timer — Shows the call times for the Last Call, Home
Outgoing, Home Incoming, Roaming Calls, All Calls, Last Reset,
and Lifetime Calls timers for the selected Calls log.
2. Say “Lookup”.
VoiceSignal prompts you to “Say the name.”
3. Speak clearly and say the full name of the person you want
4. Select Save. The following options appear in the display:
to call, exactly as it is entered in your contact list.
•
•
Create New — Lets you create a new Contacts entry.
Update Existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Finding a Contacts Entry
Voice Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Use the VoiceSignal Contacts command to view contact
information for any named contact stored in your Contacts list by
saying the name.
•
•
To say the name again, press the Repeat soft key.
To exit VoiceSignal without dialing, press or
.
Note: The Contacts command shows the requested contact information in
5. The contact information for the name you selected appears
the display but does not dial any phone numbers for the contact.
in the display.
To look up information for a specific contact:
1. In standby mode, press and hold
to launch
VoiceSignal.
Understanding Your Contacts
38
Keypad Methods
3. When the desired Contacts entry is listed in the display,
highlight it. Then, do one of the following:
If you have stored a named contact in your Contacts list, Find and
Quick Search let you locate the entry quickly. You can also browse
for a particular Contact in a Contacts Group.
•
Highlight a number listed for the named Contact, then press
to dial the highlighted number.
•
Press the Edit soft key to change the information about the
Contact.
Find by Name
1. In standby mode, do one of the following:
•
•
Press VIEW
(
)
to show information about the Contact.
•
•
Press the Contacts soft key.
Press the Menu soft key, then select Contacts
Press the Options soft key. The following options appear in the
display:
➔
Find.
–
New Contact — Lets you add a new number to your Contacts list or to
The Find screen appears in the display with an alphabetical
the selected contact.
list of Contacts showing.
–
–
Erase — Lets you delete the highlighted contact.
Send Text Msg — Lets you send a text message to the selected
Tip: If you have Quick Search enabled, from standby mode, you can press
number keys that correspond to the first few letters of a Contact name,
press the Up navigation key, then skip to Step 3. (For more information,
contact.
–
Send Pic Msg — Lets you send a picture message to the selected
contact.
–
–
Call — Lets you place a call to the highlighted contact.
2. Enter the first few characters of the name of the contact as
Send Name Card Via Bluetooth — Lets you send a copy of the
highlighted contact another Bluetooth device.
it appears in your Contacts list.
4. Select the desired option to enter its sub-menu.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by pressing
for “A”.
Group
This option lets you find a Contacts list entry with a specific
Group name.
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
39
1. In standby mode, press the Menu soft key, then select
or area code and exchange — for example, 888-987).
2. Press Options Search. The Find screen appears in the
Contacts
➔
Group. The Group List screen appears in the
➔
display.
display listing all phone numbers in your Contacts list that
contain the entered digits.
2. Select the Group you wish to browse. The selected Group
list appears in the display.
3. Highlight the desired Contacts entry, then do one of the
3. Highlight the desired Contacts entry, then do one of the
following:
following:
•
•
Press
to dial the highlighted number.
Press to display information about the Contacts entry
associated with the highlighted number. From the View Contact
screen, you can erase or edit the selected Contacts entry.
•
•
•
Press the Remove soft key to delete the selected contact from the
Group. (Does not apply to No Group.)
Press to ADD an existing contact entry to the selected Group.
(Does not apply to the General group.)
Press the Options soft key. The following options appear in the
display:
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
–
Send Txt Msg — Lets you send a text message to the selected
contact.
–
Send PIC Msg — Lets you send a picture message to the selected
contact.
Select an option to enter its sub-menu.
Search by Number
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
This option lets you find a Contacts list entry by one of its phone
numbers.
3. Highlight a number stored in this contact entry, then do
one of the following:
1. In standby mode, enter the first few numbers of the
•
Press
to delete one or more numbers.
Contacts list entry you wish to find (such as the area code
Understanding Your Contacts
40
Store Pauses in a New Contacts Entry
•
Press and hold
to clear all numbers in the highlighted field.
1. In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
Note: You can also add numbers (such as a Pager number or a Fax number)
to the entry, assign it to a Group, and add other information.
2. Press the Options soft key. The following pause options
4. When you’re finished editing the entry, press
. Your
appear in the display:
changes are saved and a confirmation message appears in
the display.
•
•
2-Sec Pause — Adds a two-second pause.
Wait — Adds a hard pause (awaits input from you).
Adding Pauses to Contacts Numbers
3. Select the pause option of your choice to add it to your
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
number sequence.
4. When you’re finished entering the number and pauses,
press the Save soft key to store the number in your
Contacts.
•
2-Sec Pause — A two-second pause stops the calling sequence for
two seconds and then automatically sends the remaining digits.
Wait — A hard pause stops the calling sequence until further input
from you.
Add Pauses to an Existing Contacts Entry
•
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
3. Highlight a number stored in this contact entry.
Note: Keep in mind that pauses count as digits towards the 32-digit
maximum.
41
4. Use the Navigation key to move the cursor to where you
want to add a pause (such as, at the right-hand end of the
number).
3. Highlight a number stored in this contact entry.
Note: If a contact has more than one stored number (such as Home and
Office), you can select which of these numbers your phone will dial
when you Speed Dial that Contact.
5. Press the Options soft key. The following pause options
4. Press the Options soft key, then select Set Speed Dial.
appear in the display:
The SPEED DIALS screen appears in the display.
•
•
Wait — a hard pause (awaits input from you).
2-Sec Pause — a two-second pause.
5. Enter or highlight an unassigned Speed Dial number.
6. Select a pause option to add it to your number sequence.
6. Press
to assign the new Speed Dial number to the
7. When you’re finished entering pauses, press
to save
selected Contact. You are prompted to confirm the
assignment.
your changes to the number in your Contacts.
Assigning Speed Dial Numbers
7. Press the Yes soft key to assign the selected Speed Dial
When you add or edit an entry to the Contacts list, you have the
option of assigning a Speed Dial number using the Options pop-
up menu or of returning to the Contacts menu and using the
Speed Dial option. You can also change a contact’s Speed Dial
number.
number. The Edit Contact screen appears in the display.
8. Press
to save the new Speed Dial number assignment.
Add a Number or E-Mail Address to an Existing Entry
2. Press the Edit soft key. The Edit Contact screen appears
2. Press the Edit soft key. The Edit Contact screen appears
in the display with the contact name highlighted.
in the display with the contact name highlighted.
Understanding Your Contacts
42
–
Enter the remainder of the e-mail address using the keypad. (For more
3. Highlight a number field or e-mail field in this contact
entry.
•
To add the domain type to the end of the e-mail address, do the
following:
4. Enter the phone number or e-mail address for the new
–
Press the abc soft key. A pop-up menu appears in the display with Abc
highlighted.
Contacts entry.
5. Press
to add the number or e-mail address to the
–
–
Select Shortcuts
Select the desired shortcut (such as, .com
to save your changes.
.
existing entry.
,
.org, or .net).
5. Press
Edit an Existing e-mail Address
Speed Dial Numbers
You can assign and change Speed Dial numbers for Contacts
entries.
1. In standby mode, press the Menu soft key, then select
2. Press the Edit soft key. The Edit Contact screen appears
Contacts
➔
Speed Dial. The SPEED DIALS list appears in the
in the display with the contact name highlighted.
display.
3. Highlight the E-Mail field (labeled with the @ symbol).
Tip: You can also assign a Speed Dial number when creating or editing a
•
To insert the @ symbol, do the following:
2. Enter a Speed Dial number in the Go To field or highlight a
–
Press the abc soft key. A pop-up menu appears in the display with Abc
highlighted.
Speed Dial number.
–
–
Select Symbols
.
3. Press SET ( ). The Set Speed Dial screen appears in
Select the symbol.
@
the display.
43
4. Enter a Contact name or highlight a Contact entry.
5. Press . You are prompted to confirm the new Speed
Dial setting.
•
Send PIC Msg — Lets you send a picture message to all contacts
in the selected Group.
Rename — Lets you change the name of the selected Group.
Erase — Lets you delete the selected Group (this does not delete
the related Contacts).
•
•
6. To save the new setting, press the Yes soft key. To discard
•
Add — Lets you add a new Group.
the new setting, press the No soft key.
3. Select Rename. The Rename Group screen appears in
the display. The current name of the selected group shows
with a flashing cursor at the end of the name.
Renaming a Contacts Group
Use this option to rename a group in your Contacts list.
1. In standby mode, press the Menu soft key, then select
Contacts
➔
Group. A list of group names (like the following
list) appears in the display:
5. Press
to save the changed group name.
•
•
•
•
•
No Group
Business
Colleague
Family
Deleting a Contacts Entry
Friends
Note: You cannot rename No Group.
2. Press the Options soft key, then select Erase. The phone
prompts you to confirm the erasure.
2. Highlight the group (other than No Group) that you wish to
rename, then press the Options soft key. The following
options appear in the display:
3. To erase the selected Contacts entry, press the Yes soft
key. To retain the Contacts entry, press the No soft key.
•
Send Text Msg — Lets you send a text message to all contacts in
the selected Group.
Understanding Your Contacts
44
Section 7: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Tip: You can send a Text message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To: field of the Create
Txt Msg screen.
Types of Messages
Your phone is able to send and receive Text and Picture
messages to compatible phones and devices. Text messages can
be up to 150 characters in length.
Tip: To launch the Create Txt Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
Note: Available memory is shared between all messages. You can store up to 100
messages. However, the exact number is dependent upon message length.
2. Enter the phone number or e-
mail address of the recipient,
Create and Send Text
Messages
1. In standby mode, press the
then press
. The Text: field
appears in the display.
3. Enter the text content of your
message using the keypad.
Messages shortcut (Up
navigation) key, then select
Send Message ➔ Text
Message. The Create Txt
Msg screen appears in the
display showing the To: list.
4. At any point while composing a message:
•
Press the Options soft key to complete the message text and set
message send options. The following options appear in the display:
–
Preset Msgs — Insert pre-composed text in your message.
Messaging
46
–
–
Save As Draft — Save the message to your Draft folder.
Receive Messages While in a Call
Save As Preset — Save the text in this message as a new Preset
Msg.
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon (
The date and time of the message also appear in the display
along with the following options:
).
–
–
–
Add To Contacts — Save the recipient’s number or e-mail address as
a Contacts list entry.
Delivery — Request a Msg Receipt, set delivery Priority, add your
Callback number (CB#), and/or add Signature text.
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
Cancel Msg — Prompts you to save this message as a Draft, then
closes the Create Txt Msg screen.
•
View Later — Saves the message to your inbox, where you can view
5. Once you’re finished entering your message, press
.
it later, and returns your phone to call mode.
Receive Text Messages
When you receive a message in standby mode, the ringer sounds
(unless turned off) and New Message appears in the display
Select the desired option.
Send Picture Messages in Camera Mode
Picture messages can be sent to recipients with compatible
phones or devices. You can even accompany a Picture message
with a voice memo or preloaded sound.
along with the closed envelope icon (
the message also appear in the display along with the following
options:
). The date and time of
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
Tip: You can send a Picture message to up to 10 recipients. Enter each
recipient’s address or phone number in a separate Send To, CC, or BCC
field of the Picture message composer.
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
Select your choice.
47
1. In standby mode, press and
4. Enter the phone number or e-mail address of the recipient
of the Picture message, then press
hold the Camera key (
).
.
The camera viewfinder screen
appears in the display.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To list.
2. Using the display as a
viewfinder, when the image
that you wish to send appears
in the display, press TAKE
5. The Subject: field appears in
the display. Enter a subject for
the Picture message using the
(
) to take a picture.
The new picture appears in
the display.
6. Press the Down navigation
Note: For more information about using the
camera feature in your phone, see
key until the Text: field is
highlighted, then enter the
message text using the keypad. (For more information,
3. To begin composing your
Picture message, press Send
(
). The Create Pic Msg
7. Your new picture appears in the PIC: field.
screen then appears in the
8. If you wish to insert a sound into your Picture message,
use the Down navigation key to highlight the Sound: field
and do the following; otherwise, proceed to step 9.
display with the Send To list highlighted.
Messaging
48
•
Press the Sounds soft key, then select My Sounds. The following
options appear in the display:
•
Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
–
Record New — Record a new memo to insert into the message.
Select an option.
10. Press to send the message. “Pic Msg Sending”
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
appears in the display and a progress bar indicates the
send status.
Send Picture Messages in Standby Mode
Send Picture messages to recipients with a compatible phone or
other device, and accompany the Picture message with a voice
memo, ring tone, or downloaded melody.
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
Select an option and select the desired sound file to be inserted into
your message.
9. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate Send To field of the
Picture message composer.
•
•
•
•
•
Preview — View the picture as the recipient will see it.
Add Preset Msg — Add pre-composed text to your message.
Save As Draft — Save the message to your Draft folder.
1. In standby mode, press the
Menu soft key, then select
Messages ➔ Send Message
➔ Picture Message. The
Create Pic Msg screen then
appears in the display with the
Send To tab highlighted.
Priority Level — Choose Urgent or Normal
.
Validity Period — Enter the Date when this message will cease to
be valid, then use the Left and Right navigation keys to choose the
Time
.
•
Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
Remove Pic — Remove the picture from your message.
Remove Sound — Remove the sound file from your message.
•
•
49
5. Press the Down navigation
key until the Pic: field is
highlighted, then press the
Picture soft key. A photo
gallery of thumbnail images
appears in the display.
Tip: To launch the Create Pic Msg screen using a voice command — In
standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Picture” into the microphone. You are then
prompted to say a Contact name or a number for the first recipient of the
message.
2. Enter the phone number or e-mail address of the recipient
using the keypad, then press
.
6. Use the navigation keys to
highlight a picture to be added
to your message, then do the
following:
Tip: Press the Add soft key to display a pop-up menu containing: Contacts,
Groups, and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
3. The Subject: field appears in
the display. Enter a subject for
the Picture message using the
•
If you want, press the View soft key to expand the highlighted
picture to full-screen size.
•
If you want to include a new picture, press the Camera soft key.
Note: For more information about using the camera feature in your phone,
•
Press
to add the highlighted picture to your message.
4. Press the Down navigation
You are returned to the Create Pic Msg screen with the
key until the Text: field is
selected picture in the Pic: field.
highlighted, then enter the
message text using the keypad. (For more information,
Messaging
50
7. If you wish to insert a sound
into your Picture message,
use the Down navigation key
to highlight the Sound: field
and do the following;
•
•
•
Save As Draft — Save the message to your Draft folder.
Priority Level — Choose Urgent or Normal
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
.
the Time
.
•
Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
Remove Pic — Remove the picture from your message.
Remove Sound — Remove the sound file from your message.
Add To Contacts — Save the recipient’s number or e-mail
address as a Contacts list entry.
otherwise, proceed to step 8.
•
•
•
•
Press the Sounds soft key, then
select My Sounds. The following
options appear in the display:
–
Record New — Record a new memo to insert into the message.
9. Select an option to perform its function.
10. Press Send ) to send the message. “Pic Msg
(
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
Sending” appears in the display and a progress bar
indicates the send status.
Receive Picture Messages
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on your phone.
When you receive a Picture Message in standby mode, the ringer
sounds (unless turned off) and New Message appears in the
display along with the closed envelope icon ( ). The date and
time of the message also appear in the display along with the
following options:
•
•
Select and insert a sound into your message.
Press to exit the pop-up menu without inserting a sound.
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
•
View Now — Retrieves and opens the message, where you have the
option to Reply, Forward, Delete, Save Text, Save Pic, or Save Msg.
•
•
Preview — View the picture as the recipient will see it.
Add Preset Msg — Add pre-composed text to your message.
51
•
View Later — Saves the message to your inbox, where you can view
it later, then returns your phone to standby mode.
•
•
Save Quick Text — Save the text in this message as a new Quick
Text.
Lock Unlock — Block/permit erasure of the highlighted
/
Select the desired option.
message.
View a Picture Message Now
•
•
Add To Contacts — Save the sender’s number to your Contacts.
Message Info — Shows message delivery status, addressee,
size, and so on.
1. After you select the View Now option, “Connecting”
appears in the display followed by “Retrieving” and a
progress bar indicating that the message is downloading
to your phone.
•
Extract — Calls the sender of the received message.
4. Select an option to perform its function.
Note: For more information on received picture message options, see
2. After the Picture message has downloaded, an alert
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
View a Picture Message Later
1. In standby mode, press the Messages shortcut (Up
navigation) key, then select Inbox. The Inbox appears in
the display.
3. While viewing your message press the Options soft key.
The following options appear in the display:
2. If the new picture message is not highlighted, use the Up
•
Play Again — Play the sound file included in the picture message
again.
and Down navigation keys to highlight the new message.
•
Forward — Send a copy of this message to another recipient.
3. Press View
(
). “Connecting” appears in the display
• Erase — Discard (delete) this message.
•
followed by “Retrieving” and a progress bar indicating
Save Pic — Save the picture included in this message to the My
Images folder.
that the message is downloading to your phone.
•
Save Sound — Save the sound file included in this message to
the My Sounds folder.
Messaging
52
4. Once a Picture message has been downloaded to your
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
3. While viewing your message, press the Options soft key.
The following options appear in the display:
•
Play Again — Picture Messages Only — Play the sound file
included in the picture message again.
•
•
Forward — Send a copy of this message to another recipient.
Reply With Copy
—
Compose and send a reply message to
Note: For more information on viewing and managing received picture
the originator of the received message and include a copy of the
original message.
• Erase — Delete this message from the Inbox (available for Picture
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
Messages only).
•
•
•
•
Save Pic — Picture Messages Only — Save the picture included
in this message to the My Images folder.
Save Sound — Picture Messages Only — Save the sound file
included in this message to the My Sounds folder.
Save Quick Text — Save the text in this message as a new Quick
Text.
Inbox
Received messages of all types (except Voicemail) are stored in
the Inbox.
Lock Unlock — Block/permit erasure of the highlighted
/
1. In standby mode, press the Messages shortcut (Up
navigation) key, then select Inbox. The Inbox appears in
the display.
message.
•
•
Add To Contacts — Save the sender’s number to your Contacts.
Message Info — Shows message delivery status, sender, size,
and so on.
Tip: While in a call, press the Options soft key, then select Messages ➔
•
Extract — Calls the sender of the received message.
Inbox.
4. Select an option to perform the function for that option.
2. Select the message that you wish to view.
53
Managing Inbox Messages
Outbox
1. In standby mode, press the Menu soft key, then select
Messages ➔ Inbox. The Inbox appears in the display.
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or e-mail was successfully received by enabling
the Enh. Delivery Ack/Delivery Ack feature.
2. Highlight a message in the list.
3. Press the Erase soft key to remove the highlighted
Review Messages in the Outbox
message from the Inbox.
1. In standby mode, press the Menu soft key, then select
Messages ➔ Outbox. Your list of sent messages appear
in the display.
– or –
Press the Options soft key. The following options appear in
the display:
Tip: While in a call, press the Options soft key, then select Messages ➔
Outbox.
•
Reply — Compose and send a reply message to the originator of
the received message.
2. Select the message that you wish to view.
•
Reply With Copy — Text Message Only — Compose and send a
reply message to the originator of the received message along with
a copy of the original received message.
3. While viewing your message press the Options soft key.
The following options appear in the display:
•
•
Forward — Send a copy of this message to another recipient.
Lock Unlock — Block/permit erasure of the highlighted
/
•
Play Again — Picture Messages Only — Play the sound file
included in the picture message again.
message.
•
•
•
Add To Contacts — Save the sender’s number to your Contacts.
Erase Inbox — Delete all unlocked messages from the Inbox.
Message Info — Shows message delivery status, addressee,
size, and so on.
•
Forward — Send the highlighted message to another recipient.
• Erase — Picture Messages Only — Delete this message from the
Outbox.
•
Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
Select an option to perform the function for that option.
Messaging
54
•
•
•
Lock
/
Unlock — Block/permit erasure of the highlighted
•
•
Forward — Send the highlighted message to another recipient.
Resend — Re-send the highlighted message to the original
recipient.
message.
Add To Contacts — Save the recipient’s number to your
Contacts.
Message Info — Shows message delivery status, addressee,
size, and so on.
•
•
Lock Unlock — Block/permit erasure of the highlighted
/
message.
Add To Contacts — Save the recipient’s number to your
Contacts.
• Extract — Call the recipient of this message.
•
•
Erase Outbox — Delete all unlocked messages from the Outbox.
Message Info — Shows message delivery status, addressee,
size, and so on.
4. Select an option to perform the function for that option.
Messages and Lock Mode
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Select an option to perform the function for that option.
Draft Box
Messages in the Draft Box are those that have been composed
but never sent. You can return to the Draft Box at any time to
view, edit, or send a draft message.
Managing Outbox Messages
1. In standby mode, press the Menu soft key, then select
Messages ➔ Outbox. Your list of sent messages appear
in the display.
Create a Draft Message
1. In standby mode, press the Menu soft key, then select
Messages ➔ Send Message and one of the following
Send Message options:
2. Highlight a message.
3. Press the Erase soft key to remove the highlighted
message from the Inbox.
•
•
Text Message
Picture Message
– or –
The Create Txt Msg screen or Create Pic Msg screen
Press the Options soft key. The following options appear in
appears in the display showing the To: list.
the display:
55
2. Enter the phone Number or E-Mail address of a recipient,
then press
•
•
•
Save As Draft — Save the message to your Drafts box.
Save As Preset — Save text of this message as Preset Msg.
Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
.
3. Compose your message using the keypad, then press the
• Delivery — Request a Msg Receipt, set delivery Priority, add your
Callback number (CB#), and/or add Signature text.
• Cancel Msg — Prompts you to save this message as a Draft, then
closes the Create Txt Msg screen.
Options soft key.
4. Select Save As Draft. A confirmation message appears in
the display and your message is saved to the Drafts box.
5. Select an option to perform the function for that option.
View and Edit Draft Text Messages
6. When you have completed composing your message,
1. In standby mode, press the Menu soft key, then select
Messages ➔ Drafts. A list of any draft messages that
you’ve saved appears in the display.
press
to send it.
View and Edit Draft Pic. Messages
1. In standby mode, press the Menu soft key, then select
Messages ➔ Drafts. A list of any draft messages that
you’ve saved appears in the display.
2. Highlight a text message that you wish to view or edit, then
press EDIT ( ). The message text edit screen appears in
the display.
2. Highlight the picture message that you wish to view, then
press EDIT ( ). The message edit screen appears in the
display.
3. Enter or change the recipient’s number and/or e-mail
address and the message text using the keypad. (For more
3. Make any needed changes and press the Options soft key.
4. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
The following options appear in the display:
•
Preview — Shows the message contents.
•
Preset Msgs — Insert pre-composed text into your message text.
Messaging
56
• Add Preset Msg — Insert pre-composed text into your message
Press the Options soft key. The following options appear in
text.
the display:
•
•
•
Save As Draft — Saves the changed message to the Draft Box.
Priority Level — Choose Urgent or Normal
Validity Period — Enter the Date when this message will cease
to be valid, then use the Left and Right navigation keys to choose
•
Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or e-mail address is included with the
draft message.
.
•
•
•
•
Lock Unlock — Block/permit erasure of the highlighted
/
the Time
.
message.
•
Delivery Ack — Choose On or Off — Requests confirmation
when your message is received.
Add To Contacts — Save the recipient’s number and/or e-mail
address to your Contacts.
Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
•
•
•
Remove Pic — Remove image included in draft message.
Remove Sound — Remove sound file included in draft message.
Add To Contacts — Save the recipient’s number or e-mail
address to your Contacts.
Erase Drafts — Delete all unlocked draft messages.
3. Select an option to perform the function for that option.
4. Select an option to perform the function for that option.
Voicemail
5. When you have completed composing your message,
Messages in your voice mailbox are logged in the Voicemail box
of the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
press
to send it.
Managing Draft Messages
1. In standby mode, press the Menu soft key, then select
Messages ➔ Drafts. A list of any draft messages that
you’ve saved appears in the display.
Listen to Voicemail Now
Once you’ve received a new voicemail message, you have the
option to either:
2. Highlight a message, then press the Erase soft key to
•
Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
remove the highlighted message from the Drafts box.
– or –
57
•
Listen Later — Returns you to standby mode where you can later
choose to call your mailbox and review your messages.
Erase Messages
You can erase all of the messages in each your boxes from one
convenient location.
ᮣ
Select the desired option.
Listen to Voicemail Now
Note: This function erases all messages in the selected box. To delete a
single message, open the box from the Messages menu, then delete
the message from the Options menu while viewing the message
content.
When you choose to review your new voicemail message(s) right
away, your phone calls your voice mailbox so that you can listen
1. In standby mode, press the Menu soft key, then select
Messages ➔ Erase Messages. The following options
appear in the display:
Listen to Voicemail Later
If you have chosen to review your voicemail messages at a later
time:
•
•
•
•
Inbox — Deletes all unlocked messages stored in the Inbox.
Outbox — Deletes all unlocked messages stored in the Outbox.
Drafts — Deletes all unlocked messages stored in the Drafts box.
All Messages — Deletes all unlocked messages stored in all of
the message boxes, except Voicemail.
1. In standby mode, press the Menu soft key, then select
Messages ➔ Voicemail. The Voicemail screen appears in
the display, showing the number of new voicemail
messages received and the date and time the latest
message was received.
2. Select the box containing the messages that you wish to
delete. You’re prompted to confirm the erasure of all
messages in the selected box or in all boxes.
2. Press
or
to call your voice mailbox and listen to
the message.
3. To delete the messages, press the Yes soft key. To cancel
deleting the messages, press the No soft key.
Note: From standby mode, you can press and hold
to dial your voice
mailbox.
Messaging
58
•
Auto Scroll — On/Off — With Auto Scroll On, the full content of a
text message automatically rolls upward on the display, one screen-
full at a time.
Message Settings
Use the Msg Settings sub-menu to define settings for your text
and picture messages.
• Messaging Font Size — Set the messaging font size to Large or
Normal
2. Select an option to perform the function for that option.
.
1. In standby mode, press the Menu soft key, then select
Messages ➔ Msg Settings.
The following options appear in the display:
• Notification — Choose to be advised of newly received messages
by an on-screen message and icon or by an icon only.
•
Auto Save — Choose whether your messages are saved
automatically when you exit them (Auto Save
,
Do not save
,
Prompt).
•
•
•
•
Auto Erase
—
Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
Auto View — On/Off — With Auto View On, the full content of a
text message appears in the display as the messages is received.
Entry Mode — Choose the default method for entering text into
messages (T9 Word Abc, ABC, 123).
,
CB# — Choose whether to include a callback phone number with
your outgoing messages, and enter the number to be included.
VM# — Edit or view your Voicemail number.
Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to be included.
•
•
• Preset Msgs
—
Erase, EDIT, or add New Preset Msgs.
59
Section 8: Widgets
Widgets are special icons that you can use to launch particular
phone features and functions or to quickly access particular
Internet addresses. You can access the widgets on your U460
phone by using the Widget Bar.
3. To launch a function/feature/
application linked with the
highlighted widget, select an
option in the widget’s pop-up
window.
Accessing Widgets
The Widget Bar is an list of easily accessed widgets that acts like
a menu.
4. To exit a widget, select
press
or
.
To access a Widget:
Widget Pop-Up Controls
1. In standby mode, using the
Left and Right navigation keys
to highlight a particular
widget.
One or more of the following controls appear in the upper right
corner of widget pop-up menus:
Closes the pop-up menu and highlights the Weather
widget(
).
2. To view information about the
Refreshes the contents of the pop-up menu.
widget and/or to access
widget options, press
.
Launches another screen, such as a settings screen for
the Weblinks widget (
).
Preview information or a menu
of options for the highlighted widget pops-up.
Tip: You can hide or display individual widgets by changing the Widget
Widgets
60
4. To save your new settings, press
. You are returned to
Configure Widgets
the Widget Bar.
This option lets you select which
widgets appear in the Widget Bar.
Note: You cannot Change, Delete, or Move
the Personalize
(
), My Account
( ) widgets.
(
), or Storefront
1. In standby mode, select the
Personalize widget (
),
then select Personalize
Widgets
2. Select an Add Shortcut widget
), then select Browse the
.
(
widget catalog. Widget catalog
options appear in the display.
3. To enable/disable a particular
widget, select the associated
option in the widget catalog. A
check mark appears in/
disappears from the option’s
check box.
61
Section 9: Browser
This section outlines how to launch Browser, how to navigate to
other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
•
Press the Menu soft key, then select Browser
➔
Go to Web.
Note: The first time you launch Browser, the warning message “Browse &
Download use airtime.” pops up in your display. To have this
message repeat the next time you launch Browser, press Continue
(
). To stop this message repeating, press Remove ( ).
Browser
With Browser, you can conveniently surf the web and download
ringtones and wallpapers using your phone. Each time you
launch Browser, your phone connects to the Internet and the
A list of categories (each representing one or more web
sites) appears in the display.
2. Use the navigation keys to browse the categories.
service indicator icon (
) appears in the display.
3. Once the desired category is highlighted, press
(
)
Stored Web Content
to enter the category list.
Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
Exit Browser
ᮣ
Press
to exit Browser.
Using Browser
When you use Browser, some of the keys operate differently than
during a normal phone call. Browser presents on-screen items in
any of the following ways:
Launching Browser
1. In standby mode, do one of the following to launch
•
•
•
Text or numeric input.
Links (embedded in content).
Browser:
Numbered options (some may not be numbered).
•
Press the Left navigation key.
Browser
62
•
Simple text.
Asterisk/Shift Key — Press before entering text to
You can act upon options or links by using the soft keys.
Browser soft keys
enable uppercase characters.
LastKey—Presstoenterazero(0),ortomovetothe
last item in a menu.
The bottom of the Browser display is a bar that contains browser
commands. The Left and Right (
) soft keys on the keypad
Pound/Space Key — Press to insert a space when
are used to execute the command that appears above them in
the display. These are called “soft keys” because their function
changes depending on the application.
entering text.
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key ( ) to select a link when it is highlighted.
End Key — Press to exit the Browser and return the
phone to standby mode.
Left Soft Key— Press toactivate the commandthat
appears above it in the display.
How Browser Keys Work
The following table lists Browser keys and their functions.
Right Soft Key — Press to activate the command
that appears above it in the display.
Navigation keys—Use to browse listsandoptions.
BACK Key — A browse, back-up key. Press once to
back uponepage. Pressandholdtogo backtohome
page. Presstoclearthelastnumber, letter, orsymbol
entered. Press and hold to completely clear the
display.
63
Section 10: Games & Apps
This section explains the Games & Apps features where users
can download multimedia, applications, games, and check news
and sports.
The Games & Apps screen appears in the display with the
Games & Apps icon (
) highlighted. You have the
following options:
Finding Applications
•
•
Press . The Games & Apps menu appears in the display. You
can use the items in this menu to browse or search for, purchase,
and download applications.
Use the Navigation keys to select an application on your phone that
you wish to launch.
With Games & Apps, you can
download full featured applications
over the air including games,
personalized ring tones, pictures,
and more.
1. In standby mode, press the
Menu soft key, then select
Games & Apps ➔ Games &
Apps.
Note: The first time you launch Games & Apps, the warning message
“Browse & Download use airtime.” pops up in your display. To have
this message repeat the next time you launch Games & Apps, press
the Continue soft key. To stop this message repeating, press the
Remove soft key.
Games & Apps
64
Section 11: Camera
Use your MyShot phone to take full color digital pictures, display
them on your phone’s vivid color display, and instantly share
them with family and friends. It’s fun, and as easy to use as a
traditional point-and-click camera. This section explains how you
can do the following:
The message “Please, Wait...” followed by a camera
viewfinder screen appears in the display. (See “Camera
Note: You can also activate the camera (from standby mode) by selecting
MENU
➔
Multimedia
➔
Camera.
•
•
•
Take pictures with your phone’s built-in digital camera.
Send and receive pictures taken with your phone’s camera.
Set the several options associated with the camera that help you take
crisp, clear pictures.
2. Point the camera lens at your
subject.
3. Using the display as a
Taking Pictures
viewfinder, press TAKE
(
)
Taking pictures with the built-in camera is as simple as choosing
a subject, pointing the lens [located on the outside of the folder
(above the external display)], and pressing a button.
when the image that you wish
to capture appears in the
display.
Simple Snap Shot — Flip Open
To take a single picture using the current camera settings, do the
following:
4. Press the Save soft key to
save the picture to the Image gallery in your phone, a part
of the phone’s memory devoted to storing, browsing, and
viewing saved pictures.
1. In standby mode — on the right side of the phone, press
the Camera key (
release it.
) and hold it for 2 seconds, then
65
Press Send
(
) to save the picture and include it in a
•
Options — Pressing the Options soft key opens a pop-up menu of
camera settings.
Picture message. (See “Send Picture Messages in Camera
Mode” on page 47 for more information.)
Camera Screen Icons
Shooting Mode — Takes a Single picture (shown), one of
a Series of separate pictures ( ), one of a Mosaic
) of multiple pictures, or a single picture in a Fun
Press the Erase soft key to erase the photo.
(
Tip: You can change a number of the camera’s settings to suit particular uses
information.
Frame (
) each time you press
.
Resolution — Indicates the current Resolution setting
(640x480 shown).
Camera Screen
Night Shot — Indicates whether your phone is ready to
When you activate your phone’s
camera, the second line of the
display is reserved for the current
camera resolution setting and the
picture counter. The center of the
display shows a viewfinder image of
the subject at which the camera is
pointed. The soft key labels on the
bottom line of the display change to
the following:
take photos in low light: Off (shown) or On
(
).
Self Timer — Delays the camera shutter by either
3
(
),
5
(
), or 10
(
) seconds after you press
) indicates how many
. A countdown timer (
seconds remain until the next picture is take.
White Balance — Indicates the current photo White
Balance setting (Auto shown). Other options are:
Sunny
Cloudy
•
Gallery — Pressing the Gallery soft key opens the images gallery so
you can view or manage your stored pictures.
Tungsten
Fluorescent
•
TAKE — Pressing
takes a picture of the image currently
appearing on the display.
Camera
66
Color Effect — Lets you select a color filter for your
photos.
using the Left and Right navigation keys.
2. Press TAKE ) to take the picture.
(
Memory Counter — Indicates the number of photos
stored in the My Images folder and the maximum
number of photos you can save at the current
Resolution and Quality settings.
Zoom in on a Subject
With Resolution set to 640x480 and below, Your camera has 9
digital zoom settings.
Camera Storage — Indicates the location, either Phone
Note: Pictures may appear somewhat grainy as you zoom in; this is a normal
Memory (shown) or Memory Card (
photos will be stored.
), where new
result of digital enhancement.
Brightness — The direction arrows indicate that the
Left and Right navigation keys adjust the Brightness
setting. A horizontal progress bar indicates the current
photo Brightness setting.
Note: The Zoom setting is affected by the Resolution setting (camera mode).
With Resolution set to 1280x960, no zoom is available. With Resolution
set to 640x480 and lower, 9 Zoom settings are available.
1. In camera mode, press the Up and Down navigation keys
Zoom — The direction arrows indicate that the Up and
Down navigation keys adjust the Zoom setting. A
vertical progress bar indicates the current Zoom setting.
to zoom in and out on your subject.
2. Press TAKE
(
) to take the picture.
Camera Shortcuts
Camera Options
You can use the Navigation Keys to quickly access both the
Brightness and Zoom capabilities of the built in camera. When
you exit the camera mode, all camera settings return to default
values.
The Camera Options let you temporarily override your default
camera settings. Any settings you change using the Camera
Options only apply to the current camera session or until you
make another change using the Camera Options.
Brightness
1. In camera mode, change the brightness of your pictures
67
Shooting Mode
2. Press TAKE
(
). The Camera automatically takes a series
of 5 pictures in quick succession. The Series shot counter
indicates the number of pictures taken in the series.
Shooting Mode lets you take a single picture, multiple pictures in
succession, or a single picture in a Fun Frame at the touch of the
TAKE key ( ).
After taking Series Shot pictures, the camera automatically
displays thumbnail views of the pictures you have just
taken so you can select the best picture(s) and discard the
rest.
Single Shot Mode
1. In camera mode, press the Options soft key, then select
/
/
➔
Single Shot. The
icon appears in
the display.
3. To save the pictures, press the Done soft key.
2. Press TAKE
(
) for each picture, which then appears in
Mosaic Shot Mode
the display.
1. In camera mode, press the Options soft key, then highlight
3. To save the picture, press the Save soft key.
/
/
➔
Mosaic Shot. The
icon and the
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Series Shot and
Mosaic Shot modes simplify the process of taking multiple
pictures in quick succession.
following options appear in the display:
• 2x2 — Combines 4 shots into a Mosaic picture.
• 3x3 — Combines 9 shots into a Mosaic picture.
2. Select the desired Mosaic shot pattern. A Mosaic shot
Series Shot Mode
counter (
or
) appears in the display.
1. In camera mode, press the Options soft key, then highlight
3. Press TAKE
(
) for each of 4 or 9 shots for the Mosaic
/
/
➔
Series Shot. The
icon and the
) appear
picture. The completed Mosaic picture appears in the
display.
Series shot counter (
in the display.
4. To save the picture, press the Save soft key.
Camera
68
Fun Frame Mode
•
•
176x144 (pixels)
Picture ID — Lets you take pictures the correct size and resolution
for Contacts list picture IDs.
Fun Frame lets you temporarily apply one of the preloaded
picture frames in your phone to characterize or enhance one or
more pictures.
2. Select the desired resolution setting. The camera applies
the selected Resolution setting to your next picture.
1. In camera mode, press the Options soft key, then highlight
/
/
➔
Fun Frame. The
icon appears in
Night Shot
the display.
Night Shot lets you take pictures in low light.
2. Select the fun frame of your choice. You’re returned to the
Note: To avoid blurred pictures when taking Night Shots, hold your phone
very steady for two seconds after pressing TAKE
(
).
camera viewfinder screen.
3. Press TAKE
(
) for each picture, which then appears in
1. In camera mode, press the Options soft key, then highlight
. The following options appear in the display:
the display.
/
4. To save the picture, press the Save soft key.
• Off
• On
Note: Choose another camera mode to disable Fun Frames.
2. Select the Night Shot setting of your choice. You’re
Resolution
returned to the camera viewfinder screen.
1. In camera mode, press the Options soft key, then highlight
Delay Pictures with the Self Timer
/
/
/
/
. The following options appear
Self Timer lets you delay a picture long enough so you or the
person taking the picture can join others in the picture.
in the display:
•
•
•
1280x960 (pixels)
640x480 (pixels)
320x240 (pixels)
1. In camera mode, press the Options soft key, then highlight
/
/
/
. The following options appear in
69
the display:
•
•
•
Cloudy — Use this setting when taking pictures in cloudy
conditions.
•
•
•
•
10 Sec.
5 Sec.
3 Sec.
Off
Tungsten — Use this setting when taking pictures under
incandescent lights.
Fluorescent — Use this setting when taking pictures under
fluorescent lights.
2. Select the desired Self Timer delay. You are returned to the
2. Select the desired White Balance. The camera applies the
camera screen and, if you select a value other than Off, a
selected White Balance setting to your next picture.
countdown timer (such as,
display.
) appears in the
Color Effect
Color Effect lets you change your pictures from full-color to two-
color, (black plus a color you select).
The next time you press TAKE
(
), the countdown timer
indicates the time remaining before the camera takes the
picture.
1. In camera mode, press the Options soft key, then highlight
. The following options appear in the display:
•
•
•
•
•
•
Normal (full-color)
White Balance
Black&White (monochrome)
White Balance allows you to adjust picture quality according to
available light.
Sepia
Negative
Green
Aqua
1. In camera mode, press the Options soft key, then highlight
/
/
/
/
. The following options
appear in the display:
2. Select the desired Color Effect. The camera applies the
•
Auto — The camera automatically adjusts picture quality to
available light.
selected Color Effect setting to your next picture.
•
Sunny — Use this setting when taking pictures in full sun.
Camera
70
Settings
Quality
1. In the Camera Settings screen, select Quality. The
following options are available:
Camera Settings (unlike other Camera Options) do not return to
their respective default values when you end the current Camera
session. Instead, Camera Settings apply to future Camera
sessions until you change individual Settings values or until you
use Reset Settings. To access the Camera Settings, do the
following:
•
•
•
High
Normal
Economy
2. Select the desired picture quality setting. The camera
1. In camera mode, press the Options soft key, then highlight
applies the selected Quality setting to your next picture.
.
ISO
2. Press OK
display.
(
). The Camera Settings screen appears in the
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
Default Storage
1. In camera mode, press the Options soft key. The options
2. Select Settings ➔ ISO. The following options appear in
menu bar appears in the display.
the display:
•
•
•
•
Auto
100
200
400
2. Select Settings ➔ Memory. The following Memory
options appear in the display:
•
•
Phone Memory — Stores pictures in phone memory.
Card Memory — Stores pictures on an optional microSD Memory
Card.
3. Select the ISO setting of your choice. You’re returned to the
3. Select the memory location setting of your choice. You’re
camera viewfinder screen.
returned to the camera viewfinder screen.
71
Metering
2. Select the view mode setting of your choice. You’re
1. In camera mode, press the Options soft key. The options
menu bar appears in the display.
returned to the camera viewfinder screen.
Shutter Sound
2. Select Settings ➔ Metering. The following options appear
Choose from three different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sound acts as an
audible reminder that your camera has taken the picture.
in the display:
•
•
•
Matrix — Adjusts exposure to the average light level over a large
picture area.
1. In the Camera Settings screen, select Shutter Sound. The
Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
following options appear in the display:
• Shutter 1
–
3
Spot — Adjusts exposure to the light level over a small portion of
the subject.
•
Off — No Shutter Sound plays when you press TAKE
(
).
2. Select the desired Shutter Sound (each sound plays as it is
3. Select the Metering setting of your choice. You’re returned
highlighted) setting. The camera plays the selected Shutter
to the camera viewfinder screen.
Sound the next time you press TAKE
Auto Save
(
).
When you take your next picture, the phone’s display
previews your subject image with the measured exposure.
1. In the Camera Settings screen, select Auto Save. The
View Mode
following options appear in the display:
1. In the Camera Settings screen, select View Mode. The
following options appear in the display:
• Off — You are prompted to save a new photo when you press
.
• On — Your phone automatically saves a new photo when you
• Landscape — Shows a wider, more panoramic view of the
subject.
press
.
2. Select the Auto Save setting of your choice. You’re
• Portrait — Shows a narrower, more vertically oriented view of the
subject.
returned to the camera viewfinder screen.
Camera
72
Reset Settings
•
Set As — Assign the currently displayed or highlighted picture to
be standby screen Wallpaper or as a Picture ID for someone in your
Contacts list.
1. In the Camera Settings screen, press the Reset soft key.
The following options appear in the display:
•
•
Erase Images — Mark and erase selected unlocked image files.
•
•
No — Keeps the current camera settings.
Move — Relocate the currently displayed or highlighted picture
from phone memory to a Memory Card or from a Memory Card to
phone memory.
Yes — Resets the camera settings to default values.
2. Select the desired option.
• View by Location — View All pictures or only those in Phone
Memory or Card Memory.
The Photo Gallery
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
•
•
Rename — Rename the currently displayed or highlighted picture.
Lock Unlock — Lock the currently displayed or highlighted
image so that it cannot be deleted, or unlock the image so that it
can be deleted.
/
1. In the Camera viewfinder screen, press the Gallery soft
•
•
Slide Show — Show the pictures as a full screen slide show.
key. Any pictures that you’ve saved appear in the display.
Image Info — View the Title, time and date created, size, and
resolution of the currently highlighted or displayed picture.
Note: You can also access My Images by pressing the Menu soft key, then
selecting Multimedia ➔ My Images.
•
Get More Graphics — Launches the Browser, letting you find and
download graphics.
2. Use the navigation keys to browse pictures in the gallery.
4. Select the desired option to perform the function for the
3. Press the Options soft key while viewing pictures in the
option or enter its sub menu.
Gallery. The following options appear in the display:
Switch From Expanded to Thumbnail Mode
1. Highlight a picture that you wish to view full size, then
•
Send — Send the currently displayed or highlighted picture as a
Picture Message or Via Bluetooth.
press View
(
).
73
2. Press List
(
) again to return to the thumbnail view of
your photos.
Point, Click, and Send Pictures
Take a picture or and send it to anyone with a compatible device
in a few easy steps.
1. In standby mode, press the Camera key (
), hold it
for 2 seconds, then release it to activate the camera.
2. Using the display as a viewfinder, take the desired picture
by pressing TAKE
(
).
3. Press Send ( ). The picture is saved automatically, and
the Create Pic Msg screen appears in the display.
4. Enter the recipient’s phone number or email address using
the keypad.
5. Press OK
(
) to save the address(es) and move to the
Subject field. Use the navigation keys to move to the other
6. When you are finished composing your message, press
Send ( ) to send the Picture message to the intended
recipients.
Camera
74
Section 12: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
My Images
My Images lets you choose the pictures that appear in your
phone’s display while in standby mode (wallpaper) and as picture
IDs for your contacts.
Accessing Multimedia
1. In standby mode, press the Menu soft key, then select
Multimedia. The following Multimedia options appear in the
display:
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Images.
If there are no pictures stored in your phone or on a
memory card, “Get New Picture” appears in the My Images
screen.
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
[To launch the camera to take a picture, press the Camera
• Music Player — Lets you play music files and create and manage
Playlists stored on an optional microSD™ Memory Card.
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
If there are pictures stored in your phone or on a memory
card, up to four thumbnail images of your pictures appear
in the display.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
• Ringback Tones — Launches the Browser so that you can locate
and obtain ringback tones.
Tip: You can also access My Images from:
2. Select the desired option to launch the desired feature or
open the desired sub-menu. The following sub-sections
describe the above listed options in greater detail.
-The Camera screen, by pressing the Gallery soft key.
75
-The Edit Contact screen, by selecting the picture ID field and pressing
• Image Info — Displays information about the picture, such as the
picture Name, creation Date and Time Resolution, and the data
Size
the Set soft key.
,
.
2. Use the navigation keys to highlight a picture.
• Get More Graphics — Launches the Browser so you can
download additional graphics files.
Press
to expand the selected picture to fill the screen.
4. Select the desired option.
3. Press the Options soft key. A pop-up menu containing the
5. Press
to return to standby mode.
Music Player
Music Player lets you play downloaded music files (MP3) stored
on an optional Memory Card. (For more information, refer to
to return to the previous menu, or press
following options appears in the display:
•
Send — Send the currently displayed or highlighted picture as a
Picture Message or Via Bluetooth.
• Set As — Lets you assign the selected picture as the Main
Wallpaper, the Front Wallpaper, or the Picture ID for a Contact.
• Erase Images — Erases one or more selected, unlocked pictures.
• Move — Lets you move the image file from the phone to the
Memory Card or from the Memory Card to the phone.
Launching the Music Player Library Menu
1. In standby mode and with a
Memory Card installed, press
• View by Location — Lets you view All image files (regardless of
where they are stored), only those image files stored in Phone
Memory, or only those image files stored in Card Memory.
the Menu soft key, then select
• Rename — Lets you rename the selected image file.
Multimedia
➔
Music Player.
• Lock / Unlock — Lets you protect the selected image file from
being deleted.
2. Press the Library soft key. The
Library screen appears in the
display, showing the following
options:
• Slide Show — Shows the available images as a sequence of full-
screen pictures.
Multimedia
76
–
Erase — Deletes highlighted or marked music file(s) from the Memory
Card.
• Now Playing — Lists the file(s) currently being played.
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
–
–
Add to Playlist — Lets you add this file to a new or existing Playlist.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
Select the desired option.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
Playing Music
• Playlists — Lists any playlists you have saved and lets you create,
1. In standby mode, press the
save, and manage playlists.
Menu soft key, then select
3. Select the desired option. A list of music files appears in
Multimedia
➔
Music Player.
the display.
2. Press the Library soft key. The
Library screen appears in the
display, showing the following
options:
4. Highlight a music file, then:
•
•
•
Press the Play soft key to play the
file.
Press MARK
(
) to select the
• Now Playing
• All
file for playing or other options.
Press the Options soft key to
select and apply any of the
following options to the
highlighted or marked music
files(s):
• Artists
• Albums
• Playlists
–
Mark All — Marks all listed music files for playing, removal, or
assignment of player settings.
77
Music Player Controls
3. Select the desired option, then
•
Volume key:
do one of the following:
–
To play a music file louder, press the
Volume key Up.
To play a music file softer, press the
Volume key Down.
•
If you select the All option — Use
the Navigation key to highlight a
music file, then press the Play
soft key to play the file.
–
•
Navigation key
To pause/resume playing a music file,
press
:
Tip: To play additional files, highlight and
more information, refer to “Launching
–
.
Note: With the flip closed, use the Camera key on the right of the phone to
pause/resume playing a music file.
•
If you select the other options — Highlight an Artist, Album, or
Playlist, then press Open ).
(
–
–
To stop playing a music file, press the Down navigation key.
To skip play to an earlier music file in the selected list, press the Left
navigation key.
Highlight a music file, then press the Play soft key to play the file.
The Music Player screen appears in the display and the
–
–
To skip play to a later music file in the selected list, press the Right
navigation key.
To return to the selected list and choose another music file to play,
press the Up navigation key.
selected music file/playlist begins playing.
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
–
Play Mode — Lets you change the play mode from Normal, Shuffle,
Repeat One, or Repeat All.
Multimedia
78
second (file name) field, pressing the Left or Right navigation key, and
selecting My Ringtones
–
–
Add to Playlist — Moves you to the Playlists menu to let you add the
selected music file to a playlist.
Remove From List — Temporarily drops the selected music file from
the Library list. To restore the music file to the list, turn your phone off
and back on again.
.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Ringtones
.
2. Use the navigation keys to highlight a particular ringtone,
–
–
–
Visual Supplements — Lets you change the Music Player visualization
to Simple View, Spectrum, Album Art, or Lyrics.
the following options are available:
Memory Info — Displays the Memory Usage screen which lists
Memory Card usage and availability (Free) amounts.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, Duration, File Size, and Date of the highlighted music
file.
•
Press the Set As soft key to assign the highlighted ringtone. The
following options appear in the display:
–
–
–
Ringtone — Lets you assign the selected ringtone to incoming voice
calls.
Contact ID — Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
Select the desired option to launch the option or to access the sub-
menu.
Alert Tone — Lets you assign the selected ringtone or sound file to All
Msg
,
Text Msg, Pic Msg, or Voicemail Msg.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
•
•
Press to Play the ringtone.
Press the Options soft key and the following options appear in the
display. Most appear only for downloaded ringtones:
–
–
Lock / Unlock — Lets you prevent/permit file deletion.
1. In standby mode, press the Menu soft key, then select
Send — Lets you send the selected file to a specified recipient in a
message or to another Bluetooth device.
Multimedia
➔
My Ringtones. A list of ringtones appears in
–
–
–
Erase — Erases the selected file.
the display.
Rename — Lets you change the name of the selected file.
Erase all — Erases one or more downloaded ringtones.
Tip: You can also access My Ringtones from:
-A Set Alarm screen by selecting the Ringer option, highlighting the
79
–
–
Ringtone Info — Displays information about the selected file, such as
the file name, the file type, and the data size.
Get More Tones — Launches the Browser to let you locate and
download additional ringtones.
3. For recorded sound files, press the Options soft key. The
following options are available:
3. Press and/or select the desired option.
4. Press to return to the previous menu, or press
to return to standby mode.
• Send — Lets you send the selected sound file to a specified
recipient in a Picture message or by way of a Bluetooth connection.
• Set As — Lets you assign the highlighted sound file. The following
options appear in the display:
My Sounds
–
–
–
Ringtone — Lets you assign the selected ringtone to incoming voice
calls.
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
Contact ID — Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
1. In standby mode, press the Menu soft key, then select
Alert Tone — Lets you assign the selected ringtone to All Msg
,
Text
Multimedia
➔
My Sounds. Record New and a list of sound
Msg Pic Msg, or Voicemail Msg
,
.
files appears in the display.
• Rename — Lets you rename the sound file.
• Lock / Unlock — Lets you protect the sound file from being
deleted.
Tip: You can also access My Sounds from:
• Erase all — Erases all or selected sound files.
-A Set Alarm screen by selecting the Ringer option, highlighting the
second (file name) field, pressing the Left or Right navigation key, and
• Sound Info — Displays information about the sound file, such as
the title, file size, file type, date, and time.
selecting My Sounds
.
4. Select the desired option.
-The Edit Contact screen by selecting the Ringtone field, pressing the Set
soft key, and selecting My Sounds
.
5. Press
to return to the previous menu, or press
Note: Recorded sound files (voice memos) do not appear in these lists.
to return to standby mode.
Multimedia
80
Voice Memo
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Sounds. A list of sound files appears in
You can use your phone to record voice memos for later
playback.
the display.
2. Highlight the voice memo you wish to review.
3. Press Play ) to play the voice memo.
Note: The maximum length for a single voice memo is 60 seconds.
(
You can save as many voice memos as will fit in the empty
memory capacity.
•
To stop the memo, press Stop
restart playing the memo.
(
). Press Play
(
)
again to
Record a Voice Memo
When the voice memo finishes playing, the selected voice
memo remains highlighted in the list of sound files.
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Sounds
➔
Record New. The Record New
Erase One Voice Memo
1. In standby mode, press the Menu soft key, then select
screen appears in the display.
2. Press Rec
(
), then start speaking. As it is recording, the
Multimedia
➔
My Sounds. A list of sound files appears in
phone displays a countdown timer that shows the seconds
remaining for the recording.
the display.
2. Highlight the voice memo you wish to erase.
•
To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
3. Press the Erase soft key. You are prompted to confirm the
erasure of the highlighted file.
3. Once you’re finished recording, press Save
(
). The new
recording is saved, and the standby mode screen appears
in the display.
4. Press the Yes soft key to erase the selected voice memo, or
press the No soft key to return to the list of sound files.
Review Voice Memos
If you’ve saved any voice memos, you can review them anytime.
81
Erase All Voice Memos at One Time
1. In standby mode, press the Menu soft key, then select
Multimedia
➔
My Sounds. A list of sound files appears in
the display.
2. Highlight a voice memo file.
3. Press the Options soft key.
4. Select Erase all.You are prompted to confirm erasure of all
recorded sound (voice memo) files.
5. Press the Yes soft key to erase all of the selected recorded
sound files or press the No soft key to return to the list of
sound files.
Multimedia
82
Section 13: Tools/Utilities
This section explains how to use your phone’s Digital Assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
•
Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
Stop Watch — Lets you view the amount of time.
Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
•
•
Tools/Utilities Menu
Tools/Utilities is a suite of Personal Information Management
(PIM) applications such as a Calendar, To Do List, and Memo Pad
that run on your phone. You can use your phone to schedule
events, set reminders, create a to do list, perform calculations,
and more with the functions provided by this useful feature.
•
Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of keypresses.
2. Select the desired application.
The following sections provide detailed descriptions of the
applications and how to use their functions.
Opening Tools Menu
1. In standby mode, press the Menu soft key, then select
Tools/Utilities. The following sub-menus appear in the
display:
Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
•
•
Bluetooth — Lets you access Bluetooth functions.
Calendar — Lets you view the current, past, or future month in a
monthly calendar layout.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
•
•
Memo Pad — Lets you store and review useful information.
Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
•
World Time — Lets you view the current time of day or night in
another part of the world.
83
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
“
Place Device You Are Connecting To In Discovery Mode
”
appears in the display.
3. Place the Bluetooth device in discoverable mode. (See the
Turn Bluetooth On/Off
device user manual for more information.)
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
4. Press OK
(
). Names of the available devices appear in
the display.
5. Highlight the device you want to pair with your phone.
6. Press PAIR ( ) to pair the selected device with the
phone. You are prompted to enter the passkey or PIN for
the selected device.
Add New Device
To search for available Bluetooth devices:
Note: When pairing you phone with another Bluetooth device other than a
headset or headphones, the same passkey or PIN must be entered on
both devices (when prompted) for the pairing to succeed.
1. From the Tools/Utilities menu, select Bluetooth. The
following options appear in the display:
•
•
Registered List
Bluetooth Settings
7. Enter the device passkey or PIN and press OK
(
). When
pairing is complete, you are prompted to Connect with the
selected device.
2. Select Registered List ➔ Add New Device.
If Bluetooth is off, you are prompted to “Turn bluetooth
8. Select Yes to connect your phone with the selected device.
Select No to bypass connection and return to the
Registered List.
on?”.
•
To leave Bluetooth off and return to the Registered List, press the
No soft key.
•
To turn Bluetooth on, press the Yes soft key.
Tools/Utilities
84
Device Name
Registered List
This menu provides a list of
Shows the handset name. To change this name, enter a new
Bluetooth wireless technology
devices discovered by your handset.
name and press OK
press the Cancel soft key.
(
). To keep the current Device Name,
Supported Profiles
1. From the Tools/Utilities
menu, select Bluetooth ➔
Registered List. A list of
registered devices appears in
the display.
Lists and explains the Bluetooth profiles your phone supports.
Device Info
Shows the Bluetooth Type, Status, and Address of your phone.
Calendar
Connecting to a Bluetooth Device
Calendar lets you view the current,
past, or future month in a monthly
calendar layout. While viewing the
calendar, the current date is
highlighted and days with scheduled
events are surrounded by a box.
From the Device list,
1. Highlight the device and press OK
(
).
2. If you are unable to pair with the device a pop-up appears
in the display. Press the Yes soft key to retry.
View an event
Bluetooth Settings
1. From the Tools/Utilities
menu, select Calendar.
Enable/Disable
Selecting this option turns Bluetooth on or off.
A calendar appears in the display with the current date
highlighted. The month and year also appear.
Discovery Mode
Allows other users to see your accessibility. Select On for other
devices to see your device for 1 minute, or Off for no visibility.
85
2. Use the Navigation key to move around within the calendar
Select the desired option to perform the related process.
3. In the events list, select the
screen. The following controls are also available:
event you wish to view. The
selected Event screen appears
in the display.
•
•
•
•
Press the Add soft key to add an event to the highlighted date.
To view previous months, press the Volume key (
To view future months, press the Volume key (
) Up.
) Down.
Use the Navigation key to move to an individual day, one day or one
week at a time.
Add a New Event
1. From the Tools/Utilities
menu, select Calendar.
•
Press View
(
) to open the
highlighted date. A list of events
on the selected date appears in
the display.
A calendar appears in the
display with the current date highlighted. The month and
year also appear.
•
Press the Options soft key while
viewing the date/calendar. The
following options appear in the
display:
2. Highlight the date of the new
event, then press the Add soft
key. The New Event screen
appears in the display.
–
Monthly — Date List only —
Returns the display to monthly
format. (Only appears when the
Date list contains events.)
3. Use the Navigation key and
the keypad to select and enter
details of the event. (For more
–
–
Go to Date — Calendar only — Lets you jump to any date you specify.
Go to Today — Calendar only — Lets you jump to any date you
specify.
–
–
–
Erase — Date List only — Lets you erase the highlighted event.
Erase Old — Calendar only — Lets you erase past events.
Erase all — Lets you erase all events.
Tools/Utilities
86
2. To add a new memo, press the Add soft key. A numbered
Note: Enter the dates and times for the event using 2 digits for day, month,
Memo screen appears in the display.
hour, and minute entries. Use 4 digits for year entries.
Use the Left/Right navigation keys to change between AM and PM
.
Tip: You can also press
for AM or press
for PM.
4. When you’re finished entering details for the memo, press
OK
(
) to save your memo.
4. When you’re finished entering event details, press
to
View, Edit, and Erase Memos
store the event in your calendar.
ᮣ
From the Tools/Utilities menu, select Memo Pad, then
Note: If you set a notification Alert, an alert (tone/vibration/light only) will
highlight a memo.
notify you prior to the event.
•
•
To view the selected memo, press View
(
).
Memo Pad
To edit the selected memo, press the Options soft key, then select
To erase the selected memo, press the Options soft key, then
select Erase (to erase the highlighted memo) or Erase all (to erase
all memos). You are prompted to verify the erasures.
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
•
•
Add a Memo
1. From the Tools/Utilities menu, select Memo Pad
–
To erase the memos, press the Yes soft key.
.
–
To keep the memos, press the No soft key.
If you have any stored memos, they appear as a list in the
To prevent a memo’s erasure, press the Options soft key, then
display. If this is your first time in Memo Pad, “No Memos
”
select Lock. To unlock the memo, press the Options key, then
select Unlock
.
appears in the display.
87
3. Use the Up and Down navigation keys to select options,
and use the Left and Right navigation keys to select values
for the options.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
4. Use the keypad to enter the time for the alarm.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
5. When you’re finished, press Save
(
). The alarm is set
and the alarm icon (
display.
) appears in the top line of the
1. From the Tools/Utilities menu, select Alarm Clock. The
When an Alarm Sounds
following options appear in the display:
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
•
•
•
Alarm 1
Alarm 2
Alarm 3
ᮣ
Select Dismiss to silence the alarm.
2. Select the desired Alarm. A Set Alarm screen appears in
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
If the alarm was set as a Mon.-Fri. alarm, the alarm icon remains in
the top of the display.
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
the display containing the following options:
•
•
Alarm — Turns the alarm Off or On.
Time — Use the numeric keys to enter the time, and use the Left
and Right navigation keys to select AM or PM.
Frequency — Lets you repeat the alarm Daily, Mon – Fri,
Weekends, or Once.
•
•
Ringer — Lets you set the alarm ringer to a particular Tone, to
Vibrate, or to Light Only.
Tools/Utilities
88
Disabling Alarms
Turn Off the Alarm
•
•
Reset Alarm — Disables the highlighted Alarm and resets its
settings to default values.
Reset All — Disables all Alarms and resets all of their settings to
default values.
Turning an Alarm to Off allows you to retain the current settings
for later reuse.
4. Select the desired option.
1. From the Tools/Utilities menu, select Alarm Clock. The
World Time
following options appear in the display:
World Time lets you view the time of
day or night in another part of the
world. World Time displays time in
any of 52 different cities and/or time
zones around the world.
•
•
•
Alarm 1
Alarm 2
Alarm 3
2. Highlight an active Alarm.
1. From the Tools/Utilities
menu, select World Time. The
World Time screen appears in
the display.
3. Press the Options soft key, then select Off. The selected
alarm is turned off.
Reset the Alarm(s)
1. From the Tools/Utilities menu, select Alarm Clock. The
following options appear in the display:
2. To display a time zone and city that you wish to view, do
one of the following:
•
•
•
Alarm 1
Alarm 2
Alarm 3
•
•
Use the Left/Right navigation keys to browse the World Time map.
Press the Options soft key and select Go to City, then select a city
from the Go to City list.
2. Highlight an active alarm.
3. Press the Options soft key. The following options pop-up
in the display:
89
The following time zones/cities are supported:
3. To display Daylight Saving Time (DST) for a selected time
zone, press the DST On soft key. To restore Standard Time,
press the DST Off soft key.
PST/PDT : Los
Angeles
MST/MDT :
Denver
Phoenix
CST/CDT :
Dallas
CST/CDT :
Chicago
Miami
EST/EDT :
New York
Caracas
Setting the Home Clock
The Home Clock time and date appear on the phone’s Main and
Front display clocks. The Home Clock time and date also appear
near the top of the World Time Screen.
La Paz
Newfoundland Buenos Aires Brasilia
Mid Atlantic
Paris
Cape Verde
Rome
Lisbon
London
Athens
Moscow
Kabul
1. In the World Time screen, use the Left/Right navigation
Berlin
keys to highlight the desired time zone and/or city.
Helsinki
Jidda
Istanbul
Tehran
Nairobi
Abu Dhabi
New Delhi
Bangkok
Seoul
2. Press the Options soft key, then select Set as home clock
.
You are prompted to confirm your Home Clock change.
Tashkent
Kathmandu
Hong Kong
Adelaide
Wellington
Mumbai
Alma-ata
Beijing
Colombo
Jakarta
Tokyo
3. To change the Home Clock to the selected time zone,
select Yes. To keep the current Home Clock setting, select
No
.
Guam
Sydney
Samoa
Okhotsk
Midway
Setting a Second Clock
Auckland
Hawaii
The second clock time and date appear at the bottom of the
World Time screen when you launch the tool. This is a handy
option that lets you keep the times in two different time zones
handy for ready reference.
HAST/HADT :
Honolulu
AKST/AKDT : PST/PDT : San
Alaska Francisco
1. In the World Time screen, use the Left/Right navigation
keys to highlight the desired time zone and/or city.
Tools/Utilities
90
2. Press the OK soft key. You are returned to the Tools/Utilities
menu. Now, whenever you launch World Time, your
selected second clock’s time and date appear at the
bottom of the World Time screen.
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
-
] Multiplication
] Subtraction
=
+] Addition
÷] Division
4. Use the keypad to enter the second number into your
Calculator
equation.
You can perform calculations, including addition, subtraction,
multiplication, and division using your phone.
5. Press
result.
To perform another calculation, press the Back soft key.
Stop Watch
=
(
) to perform the calculation and view the
1. From the Tools/Utilities menu, press
for Calculator.
The Calculator appears in the display.
2. Enter the first number in your
equation using the keypad
(numbers can be up to nine
digits long).
You can use this menu to set a stop
watch.
1. From the Tools/Utilities
•
•
•
Press
to enter a decimal
menu, select Stop Watch.
point. (Calculator only accepts 3
digits after a decimal point.)
Press
nested calculations with
parentheses.
Press the +/- soft key to change
the sign of an entry.
2. Press
to start, stop, and
to begin and end
resume the stopwatch count.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Your choices are as follows:
91
3. At the start of each succeeding event/lap, press the
Record soft key to record the completion time for the
previous event/lap.
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
1. From the Tools/Utilities
menu, select Converter and
the conversion feature you
wish to use.
4. Press the Reset soft key to erase all stop watch (lap) times
recorded.
Converter
The conversion menu provides the following conversion
categories:
2. Use the Navigation key to
select the units to be
•
•
•
•
•
•
Currency
Length
converted From and To.
3. Enter the quantity you want converted in the From field.
Weight
Volume
Area
The converted quantity appears in the To field.
Note: To include a decimal point, press the
key.
Temperature
Currency — Reviewing/Editing Exchange Rates
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
Tools/Utilities
92
1. From the Tools/Utilities
menu, select Converter ➔
Currency.
Currency — Adding Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
2. Press the Rates soft key. The
Exchange Rate list for the
USD currency appears in the
display.
1. From the Tools/Utilities menu, select Converter ➔
Currency.
2. Press the Rates soft key. The Exchange Rate list for the
USD currency appears in the display.
3. Press the Add soft key. The
Add Exchange Rate screen
appears in the display with the
Base field highlighted.
3. Press Edit
(
). The Edit
Exchange Rate screen appears
in the display.
4. Highlight the currency
4. Use the Left/Right navigation
keys to select the Base
Exchange Rate to be changed.
5. Use the keypad to change the
exchange rate. (For more
currency to be converted from.
5. Highlight the Currency field.
6. Press
to save the changed exchange rate.
to return to the Currency Converter screen.
7. Press
93
6. Enter an identifier of up to 5
characters for the new
Note: Press
to enter the decimal point.
The Exchange Rate field only accepts two digits after the decimal
point.
currency using the keypad.
9. Press Save
(
) to save the new exchange rate.
Currency — Erasing Exchange Rates
7. Highlight the Exchange Rate
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
field.
8. Enter a decimal exchange rate
for the new currency using the keypad. (For more
1. From the Tools/Utilities menu, select Converter ➔
Currency.
2. Press the Rates soft key. The Exchange Rate list for the
USD currency appears in the display.
3. Highlight the currency exchange rate to be erased.
4. Press the Erase soft key. You are prompted to confirm the
erasure.
5. To erase the selected exchange rate, press the Yes soft
key.
To return to the Exchange Rate list without erasing the
selected exchange rate, press the No soft key.
Tools/Utilities
94
4. If needed, highlight the # Paying field, then use the keypad
to enter the number of persons paying. (For more
Tip Calculator
Tip Calculator automatically calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
5. The amount of the Tip, the bill Total, and the amount Each
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
person should pay appear in the lower half of the screen.
1. From the Tools/Utilities menu, select Tip Calculator. The Tip
Calculator screen appears in the display with the Bill field
highlighted.
3. If needed, highlight the Tip
field, then use the keypad to
enter a tip percentage. (For
“Entering Numbers” on
95
Section 14: Voice Service
This section explains how to use your phone’s digital assistant
functionality to schedule events, set reminders, create a “to do”
list, perform calculations, and more.
“Say a Command” appears in the
display and is pronounced through the
earpiece, followed by a list of available
commands.
Launching Voice Service
VoiceSignal is state-of-the-art voice recognition software for your
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
your phone’s voice settings, do the following:
Note: You can also set your phone to start
VoiceSignal when you open the
1. In standby mode, press the Menu soft key, then select
VoiceSignal includes the following
commands:
Voice SVC. The following options appear in the display:
•
Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if you
have hundreds of them stored on your phone. You can also dial any
telephone number, even if it is not stored in your contact list, by saying
•
Voice Commands—Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
Voice Settings—Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences.
•
2. Highlight the desired sub-menu, then press
.
•
information.)
Voice Commands
To start VoiceSignal, do one of the following:
•
•
In standby mode, press and hold the
key.
From the Voice SVC menu, select Voice Commands
.
Voice Service
96
•
•
•
information.)
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
Ending Calls Before Restarting the VoiceSignal Software
Lookup — Lets you look up and display contact information for any
Go to — Lets you access the Voice Memo, Calendar, and Contacts List
information.)
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Voice Settings
Choice Lists
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
•
Check — Lets you check your phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
Note: Speaking clearly, say the command that you want to use. If, after a few
seconds, the device has not recognized a command, it prompts you to
repeat the command. If, after a few more seconds, it still has not
recognized a command, it tells you “Sorry, no match found,” and
cancels voice recognition.
Voice Command Tips:
•
Make sure you wait for the beep before speaking.
To change the way VoiceSignal uses choice lists:
•
Speak clearly at a normal volume, as if you were talking on the phone.
1. From the Voice SVC menu, select Voice Settings ➔
Choice Lists the following options appear in the display:
Voice-Activating Your Contacts List
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
97
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
Note: After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Always Off—VoiceSignal never displays a choice list.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Use the navigation keys to highlight the Choice List
behavior you prefer, then press the
new setting.
key to accept the
Tips for Adapting Digit Dialing
•
•
•
•
Use Adapt Digits in a quiet place.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
Sensitivity
1. From the Voice SVC menu, select Voice Settings ➔
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Up/Down navigation key to adjust the Sensitivity
setting to Reject More spoken commands or names or to
Reject Less spoken commands or names.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
3. To accept the new setting, press the OK soft key.
Adapt Digits
Digit Dialing
To adapt digit dialing, do the following:
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
1. From the Voice SVC menu, press Voice Settings ➔ Digit
Dialing. The following options appear in the display:
•
•
Adapt Digits
Reset Digits
Voice Service
98
2. Select Adapt Digits. Your phone displays the first digit
sequence and “Please say” plays through the speaker
followed by the four digits appearing in the display.
The following options appear in the display:
•
•
Adapt Digits
Reset Digits
2. Select Reset Digits. The phone prompts you to confirm
3. Wait for the beep and say the digits using your normal tone
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?”
digit adaptation rest.
Press the OK soft key to reset your digit adaptation, or
press the Back soft key to cancel and retain your digit
adaptation.
•
•
If the recording was good, say “Yes.”
If you need to re-record, say “No.”
If you say “No,” the phone prompts you to pronounce the
Sound
digits again. Wait for the beep and then say the digits.
Sound lets you specify what (if any) text prompts you want your
phone to read to you through the earpiece.
Repeat this step until you’re satisfied with the recording.
1. From the Voice SVC menu, select Voice Settings ➔
4. After confirming that the recording sounds “ok”, continue
Sound. The following options appear in the display:
the recording process with the next set of digits.
•
•
•
•
Prompts — Enables or disables audio prompts.
Digits — Enables or disables audio digit playback.
Names — Enables or disables audio name playback.
Name Settings — Lets you adjust the speed and volume of your
phone’s audio name playback.
5. After 10 sets of digits, “Adaptation complete” plays
through the speaker and you are returned to the Digit
Dialing menu.
Reset Digits
2. Highlight the desired setting.
To reset digit dialing to factory default settings, do the following:
1. From the Voice SVC menu, select Voice Settings ➔ Digit
Dialing.
3. Press to accept the new setting.
99
Voice Launch
The About Nuance screen appears in the display showing
the version level of the Vsuite software currently installed
on your phone.
To set the key or action that launches VoiceSignal, do the
following:
1. From the Voice SVC menu, select Voice Settings ➔ Voice
Launch. The following options appear in the display:
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
•
Key / EarMic — Attach a headset to your phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset. Press
to release VoiceSignal.
•
Key / Flip — Press and hold
repeated calls. Open and close the flip to make and end calls using
VoiceSignal. Press to release VoiceSignal.
2. Use the navigation keys to highlight the option you want,
to activate VoiceSignal for
then press
to save and exit.
About VoiceSignal
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on your phone.
ᮣ
From the Voice SVC menu, select Voice Settings
➔
About.
Voice Service
100
Section 15: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
Settings Menu
ᮣ
To access the Settings menu, select Menu
➔
Settings. The
Settings menu appears in the display.
Menu Style
Menu Style lets you choose how the
main menu appears in your display.
You are shown a preview of your
choice.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
1. From the Settings menu,
select Display Settings
➔
Note: Contact your Wireless Provider to determine whether, when, or where
Menu Style. The following
location-based services are available.
options appear in the display:
1. From the Settings menu, select Location. The following
• Icon — Display the main menu
as a 3x3 grid of icons.
options appear in the display:
• List — Display the main menu in a list format.
• Location On — GPS location setting is on whenever you make or
receive a call, wherever the feature is available.
2. Highlight the desired menu format.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
3. Press the OK soft key to save your selection and return to
the Display Settings menu.
101
Wallpaper
1. From the Settings menu, select Display Settings
Format Front Clock. A scrollable list of front display
images appears in the display.
➔
Clock
➔
Wallpaper lets you choose the pictures that appear in your
phone’s displays while in standby mode.
1. From the Settings menu, select Display Settings
➔
2. Use the Left and Right navigation keys to scroll through the
Wallpaper. The following options appear in the display:
following options until the desired format displays:
• Main Display
• Front Display
2. Select either option and the following image source
options appear in the display:
• My Images
• Preset Images
3. Press the OK soft key to save your selection and return to
3. Select either option and a matrix of thumbnail images
appears in the display.
the Display Settings menu.
Theme
4. Highlight the preferred picture or image to display when
Theme lets you select the color scheme your phone uses to
display and highlight menu items and scroll bar positions.
the phone is in standby mode.
5. To save your preference, press OK
(
).
Clock Format
Clock Format lets you choose the format for the Front Display
clock.
Changing Your Settings
102
1. At the Settings menu, select Display Settings ➔ Theme.
Backlight
The following options appear in the display:
You can set the backlight for your display and keypad to remain
on or off or to remain on for a specified period of time and at a
specified brightness.
Note: Prolonged backlight use drains your battery faster.
1. From the Settings menu, select Display Settings
➔
Backlight Main Display Keypad Charging. The following
➔
/
/
2. Highlight the desired setting, then press
to save the
options appear in the display:
setting.
• 7 Seconds
• 15 Seconds
• 30 Seconds
Dialing Font Size
Dialing Font Size lets you select the font size used to display
dialed numbers.
• Always On (this setting uses much more power than the timed
settings)
1. At the Settings menu, select Display Settings ➔ Dialing
• Always Off
Font Size. The following options appear in the display:
2. Select the desired Backlight Time setting.
•
•
Normal
Large
Brightness
2. Select the desired option.
Brightness lets you adjust the brightness of the backlight.
1. From the Settings menu, select Display Settings
Backlight Brightness. The Brightness screen appears in
the display.
➔
➔
103
2. To adjust the backlight brightness, use the Left or Right
1. From the Settings menu,
navigation key.
select Sounds Settings
Master Volume. The Master
Volume screen appears in the
display.
➔
3. To save your new setting, press the OK soft key.
Front Contrast
Set the Front (Sub) LCD contrast to your preference.
1. At the Settings menu, select Display Settings ➔ Front
Contrast. The Front Contrast screen appears in the
display.
2. Select the preferred Volume
setting:
•
•
•
•
Silence All
Low
•
•
•
•
Vibrate
Low/Medium
Medium/High
Vibrate/High
2. Use the Navigation key to adjust the contrast for the Front
Display. The results of your adjustments appear in the
display.
Medium
High
3. Press OK
(
) to save your new contrast setting.
3. To preview your new setting, press the Play soft key. To
Sounds Settings
The Sounds Settings menu provides a variety of options to
customize audio properties for such things as ringers, keypad
tones alerts, and more.
end the preview, press the Stop soft key.
4. To retain your setting, press the SET soft key. You are
returned to the Sound Settings screen.
Master Volume
Ringer Type
Volume lets you adjust the loudness of the Voice Call, Message,
and Alarm sounds your MyShot produces.
You can assign ringer types and melody tones for calls, alarms,
and other alerts, in the Ringer Type sub-menu.
Changing Your Settings
104
1. From the Settings menu, select Sounds Settings
Type
The following options appear in the display:
➔
Ringer
1. From the Settings menu, select Sounds Settings
➔
Ringer
.
Type Messages Msg Reminder. The following options
➔
➔
appear in the display:
• On
• Off
• Voice Calls — Lets you select which ringtone, sound file, and/or
one of a set of ringtones and/or sound files plays when you receive
a voice call.
2. Select the desired option.
• Messages — Lets you select distinctive ringers for the following
message types:
Alerts
–
–
–
Text Message
Picture Message
Voicemail
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
2. Select the desired option. The following ringer file options
1. From the Settings menu, select Sounds Settings
➔
Alerts.
appear in the display:
The following Alerts options appear in the display:
• My Ringtones
• Minute Beep — Sounds an alert ten seconds before each elapsed
minute of a call.
• My Sounds
• Roaming — Sounds an alert when you leave your home service
3. To assign a ringtone or sound to the selected option, select
the desired ringtone or sound file in the list.
area during a call.
• Call Connect — When you make a call, an alert sounds when the
call is answered.
Msg Reminder
Msg Reminder lets you enable/disable the reminder tone that
sounds to remind you of your unread messages.
• Power On/Off — Plays a melody when the phone is being turned
on or off.
• Charge Alert — Sounds an alert when the phone battery is
recharged.
105
2. Select the desired Alert option setting (On or Off).
Call Settings
You can use Call Settings to select how your phone handles voice
calls,.
3. To save your new alert settings and return to the Sound
Settings menu, press the Save soft key.
Call Answer
Key Tone
You can select a specific answer mode when you receive an
incoming call.
Key Tone lets you adjust the volume level and length of tone that
the keypad generates each time you press a key.
1. From the Settings menu, select Call Settings
Answer
The following call answer settings appear in the display:
➔
Call
1. At the Settings menu, select Sound Settings ➔ Key
.
Tone. The following options appear in the display:
•
•
Tone Level (volume)
Tone Length
• Any Key — Press any key except the
answer an incoming call.
or Left soft key to
Tone Level is highlighted.
• Send Key — Press
to answer an incoming call.
2. Select Tone Level to adjust the Key Tone volume.
•
Flip Open — Open the flip or press
call.
to answer an incoming
•
Use the Volume key or Navigation key to set the Key Tone volume.
–
–
–
Off
–
–
–
Low
Tip: You can set your phone to answer calls automatically, without any input
Low/Medium
Medium/High
Medium
High
2. Select the desired call answering method.
•
Press Set
(
) when the desired key tone volume setting is
Call Alert
reached. You are returned to the Key Tone sub-menu.
1. From the Settings menu, select Call Settings
➔
Call Alert
.
3. Select Tone Length, then select Short or Long. You are
The following Call Alert settings appear in the display:
returned to the Key Tone sub-menu.
Changing Your Settings
106
• Ring Only — Phone rings for an incoming call.
Auto Retry
• Caller ID + Ring — Phone rings and the display shows caller ID for
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
an incoming call.
• Name Repeat — Phone repeats displaying Contact name or caller
ID.
1. From the Settings menu, select Call Settings
The following settings appear in the display:
• Off — Disables automatic re-dialing of numbers.
➔
Auto Retry.
2. Select the desired call alerting method and press the OK
soft key to save your selection.
Auto Answer
• Every 10 Seconds — Phone automatically re-dials a number
every 10 seconds.
With Auto Answer enabled, your phone automatically answers
calls after a period of time that you select.
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds.
1. From the Settings menu, select Call Settings
➔
Auto
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds.
Answer. The following settings appear in the display:
• Off — Disables automatic answering of calls
2. Select the desired setting and press the OK soft key to save
• After 1 Second — Phone automatically answers calls after 1
second.
your selection.
TTY Mode
• After 3 Seconds — Phone automatically answers calls after 3
seconds.
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
• After 5 Seconds — Phone automatically answers calls after 5
seconds.
2. Select the desired call automatic answering setting and
press the OK soft key to save your selection.
107
1. From the Settings menu, select Call Settings
➔
TTY Mode.
Phone Settings
You are prompted to confirm you want to change the
current TTY Mode setting.
Airplane Mode
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance.” message pops up when you select TTY Mode
.
2. To access the TTY Mode settings, press the Yes soft key. To
return to the Call Settings sub-menu, press the No soft key.
1. From the Settings menu, select Phone Settings
➔
Airplane
Mode.The following settings appear in the display:
3. If you press the Yes soft key, the following settings appear
• On — Disables the radio transmitter and receiver in your phone.
• Off — Enables the radio transmitter and receiver in your phone.
2. Select the desired Airplane Mode setting and press the OK
soft key to save your selection.
in the display:
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• TTY+Hear (HCO) — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
Language
The language option on your phone can change the language of
voice prompts, menus, and text-input.
4. Select the desired TTY Mode setting and press the OK soft
key to save your selection.
1. From the Settings menu, select Phone Settings
➔
Language. The following settings appear in the display:
Note: The TTY icon (
) appears in the top of the display when the phone is
in standby mode.
• English
• Español
Changing Your Settings
108
2. Select the desired Language setting and press the OK soft
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
key to save your selection.
• Unlock — Unlocks the phone.
Security
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
4. Select the desired phone Lock mode setting and press the
Lock Phone
OK soft key to save your selection.
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
Change Lock Code
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1. From the Settings menu, select Phone Settings
➔
Security.
You’re prompted to enter the lock code.
1. From the Settings menu, select Phone Settings
➔
Security.
You’re prompted to enter the lock code.
Note: The default lock code is the last four digits of your telephone number.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code and press the OK soft key.
3. Select Change Lock. You’re prompted to enter the new lock
code.
2. Enter the lock code and press the OK soft key.
4. Enter the new lock code. You’re prompted to re-enter the
3. Select Lock Phone. The following phone Lock mode
new lock code for verification.
settings appear in the display:
109
5. Enter the new lock code again. Your new Lock Code is
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
stored.
Store Emergency Numbers
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
1. From the Settings menu, select Phone Settings
➔
Security.
You’re prompted to enter the lock code.
Emergency #
Note: The default lock code is the last four digits of your telephone number.
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
2. Enter the lock code and press the OK soft key.
3. Select Emergency #
.
4. Select from the three emergency number entries.
5. Enter an emergency number (up to 32 digits in length),
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
then press the OK soft key.
6. To save the number that you entered, press the OK soft
key.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press
to place the call.
Reset Phone
Important!: DO NOT depend on this phone as a primary method of calling
Reset Phone returns all Settings to their factory default values.
911 or for any other essential or emergency communications.
Changing Your Settings
110
1. From the Settings menu, select Phone Settings
➔
Security.
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
You’re prompted to enter the lock code.
needs to be deleted separately.
Note: The default lock code is the last four digits of your telephone number.
4. To erase all entries, press Yes. To keep the current entries
and return to the Security sub-menu, press No
.
2. Enter the lock code and press the OK soft key.
Restrictions
3. Select Reset Phone. You are prompted to confirm that you
want to restore default settings (except for the Contacts
and Voice Dial).
Restriction lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
1. From the Settings menu, select Phone Settings
➔
Security.
4. To return to the Security sub-menu without resetting the
You’re prompted to enter the lock code.
phone, press No. To restore default settings, press Yes
.
Note: The default lock code is the last four digits of your telephone number.
Erase All Contacts Entries
Erase All Entries erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
2. Enter the lock code and press the OK soft key.
3. Select Restriction. The following options appear in the
display:
1. From the Settings menu, select Phone Settings
➔
Security.
• Outgoing — When set to On, restricts the phone from originating
calls.
You’re prompted to enter the lock code.
• Incoming — When set to On, restricts the phone from receiving
calls.
Note: The default lock code is the last four digits of your telephone number.
2. Enter the lock code and press the OK soft key.
• Contacts — When set to On, restricts access to the Contacts list.
4. Select the desired Restriction, then select the preferred
setting.
3. Select Erase All Entries. You are prompted to confirm
erasure of all Contacts entries.
111
5. To save your new setting, press the OK soft key.
1. From the Settings menu, select Phone Settings
➔
Set Time.
The following options appear in the display:
System Select
• Set Time
The System Select menu allows you to select the roaming setting
for your phone.
• Set Date
2. Select the desired option.
1. From the Settings menu, select Phone Settings
Select
➔
System
•
For Set Time, the Set Time screen appears in the display.
.
–
–
Use the up and down arrow buttons to select the current time.
The following roaming options appear in the display:
Press the OK soft key to save your time setting.
• Home only — Your phone is available for normal operation only
within your designated coverage area.
•
For Set Date, the Set Date screen appears in the display.
–
–
Use the up and down arrow buttons to select the current date.
• Automatic — Your Wireless Provider’s Preferred Roaming List
(PRL) of networks is used to acquire service. If no preferred
networks are found, any digital system is acquired.
Press the OK soft key to save your date setting.
Quick Search
2. Select the preferred roaming option, then press the OK soft
Quick Search is an easy way to locate Menu items and Contacts.
1. At the Settings menu, select Phone Settings ➔ Quick
Search. The following options appear in the display:
key.
Set Time
•
•
On — Quick Search is enabled
Off — Quick Search is disabled
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
2. Use the Navigation key to highlight the desired Quick
adjusts time and date automatically.
Search option, then press the key to save your setting.
With Airplane Mode set to On, this function is enabled. In digital service
Changing Your Settings
112
Searching for a Menu Item
For example, to search for “Sally” you would enter:
1. In standby mode, press the first few numeric keys that
correspond to the letters of the Menu item name.
S
A
L
L
Y
For example, to search for “Inbox” you would enter:
2. Press the Up navigation key. The Find screen appears in
the display showing a list of Contact names that match
your entry.
I
N
B
O
X
3. Highlight the desired Contact, then press
to call the
2. Press the Down navigation key. The Menu List screen
appears in the display showing a list of menu items that
match your entry.
highlighted Contact.
PC Connection
3. Select the desired menu item to access the content of the
PC Connection lets you allow or block PC connections to your
phone, using an optional USB Data Cable.
menu item.
1. From the Settings menu, select Phone Settings ➔
PC Connection. The following settings appear in the
display:
Tip: If the menu item you are searching for does not appear in the Menu List
screen, try expanding your search by pressing the
last digit of your entry.
key to delete the
Searching for a Contact
• USB Mass Storage — Your phone appears as a removable disk
drive to your PC, allowing you to transfer files (such as, music or
text files) to and from your phone.
1. In standby mode, press the first few numeric keys that
correspond to the letters of the contacts name.
• No Connection — Blocks connection and file transfers with a PC.
2. Select the desired setting.
113
• Phone Memory — Saves the selected type of files in your phone’s
Memory Info
Memory Info lets you quickly and easily review and manage your
phone memory usage. To access Memory Info, do the following:
memory.
• Card Memory — Saves the selected type of files in a removable
microSD memory card.
ᮣ
From the Settings menu, select Memory Info. The following
3. Select the desired storage location. “Save Options set
”
options appear in the display:
appears in the display, and you are returned to the Save
• Save Options — Lets you specify whether your images will be
stored in your phone or on an optional Memory Card.
Options menu.
Phone Memory
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
1. From the Settings menu, select Memory Info
Memory
➔
Phone
Save Options
.
Lets you specify where you want your images stored. To access
Save Options, do the following:
The Phone Memory menu appears in the display showing
the following options:
1. From the Settings menu, select Memory Info
➔
Save
• Memory Usage — The phone Memory Usage screen appears in
the display showing the following information:
Options. The following file type options appear in the
display:
–
–
–
–
–
Total Used memory usage
Available unused memory
My Images memory usage
My Ringtones memory usage
My Sounds memory usage
• Images
2. Select the desired file type. The following storage options
appear in the display:
Changing Your Settings
114
–
–
Applications memory usage
•
•
Press the Options soft key, then select Move
/
Copy. The Move (or
Copy Picture Ringtone Sound screen appears in the display.
)
/
/
PIC Msg memory usage
Highlight a file you want to move/copy, then press the MARK soft
key to mark the file for removal/copying. (Press the Mark All soft
key to mark all files for removal/copying.)
Press the OK soft key to return to the Phone Memory menu.
• My Images
• My Ringtones
• My Sounds
•
•
•
Press the Done soft key. You are prompted to confirm removal/
copying of the selected file(s).
2. Select My Images
/
My Ringtones My Sounds. A list of all
/
Press Yes to removal/copying the marked file(s) or press No to
return to the My Images
/
My Ringtones My Sounds screen.
/
files in the related folder appears in the display.
Press
to return to the Phone Memory menu.
Files are listed by name, and each file entry shows the
name of each file.
5. Press
to return to the Memory Info menu.
Card Memory
3. To erase files, do the following:
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
•
Press the Options soft key, then select Erase. The Erase Picture
Ringtone Sound screen appears in the display.
/
/
•
Highlight a file you want to erase, then press the MARK soft key to
mark the file for erasure. (Press the Mark All soft key to mark all
files for erasure.)
1. From the Settings menu, select Memory Info
➔
Card
Memory. The Card Memory menu appears in the display
•
•
•
Press the Done soft key. You are prompted to confirm erasure of
showing the following options:
the selected file(s).
• Memory Usage — Lets you review your usage of your Memory
Card. The Card Memory Usage screen appears in the display
showing the following information:
Press Yes to erase the marked file(s) or press No to return to the
My Images
/
My Ringtones
/
My Sounds screen.
Press
to return to the Phone Memory menu.
–
–
Total Used memory usage
4. To move/copy files to the Memory Card, do the following:
Available unused memory
115
–
–
–
–
My Images memory usage
My Music memory usage
My Ringtones memory usage
My Sounds memory usage
•
•
Press Yes to erase the marked file(s) or press No to return to the
Erase Images
/
Erase Music
/
Erase Ringtones Erase Sounds
/
screen.
Press
to return to the Card Memory menu.
4. To move/copy files to Phone Memory, do the following:
Press the OK soft key to return to the Card Memory menu.
•
Press the Options soft key, then select Move Copy. The Move (or
/
• My Images
• My Music
Copy Picture Ringtone Sound screen appears in the display.
)
/
/
• My Ringtones
• My Sounds
• Format Card
Note: You cannot move or copy music files to your phone’s memory.
•
Highlight a file you want to move/copy, then press the MARK soft
key to mark the file for removal/copying. (Press the Mark All soft
key to mark all files for removal/copying.)
2. Select My Images
/
My Music
/
My Ringtones My Sounds. A
/
list of all files in the related folder appears in the display.
•
•
•
Press the Done soft key. You are prompted to confirm removal/
copying of the selected file(s).
Files are listed by name, and each file entry shows the
name of each file.
Press Yes to removal/copying the marked file(s) or press No to
return to the My Images
/
My Ringtones My Sounds screen.
/
3. To erase files, do the following:
Press
to return to the Card Memory menu.
5. Press
to return to the Memory Info menu.
•
•
Press the Erase soft key. Highlight a file you want to erase, then
press MARK
(
) to mark the file for erasure. (Press the Mark All
Formatting a Memory Card
soft key to mark all files for erasure.)
Formatting a microSD Memory Card erases any data, files, and
directories currently on the card and creates multimedia
directories compatible with your phone.
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
Changing Your Settings
116
2. Press
to return to the Phone Info menu.
Caution!: Repeated formatting of a Memory Card reduces its useful life.
Icon Glossary
To format a Memory Card, do the following:
This option causes the ICON GLOSSARY list to appear in the
display and show the icons that can appear in the display and the
names of the icons.
1. From the Settings menu, select Memory Info
Memory Format Card. You are prompted to confirm
formatting of the Memory Card.
➔
Card
➔
1. At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2. To format the Memory Card, press the Yes soft key. To
return to the Card Memory menu without formatting the
Memory Card, press the No soft key.
2. Press
to return to the Phone Info menu.
Phone Info
Version
Phone Info options let you identify important information about
your phone, such as the hardware and software versions of your
phone, the meanings of your phones status icons, and the phone
number assigned to your phone.
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1. At the Settings menu, select Phone Info ➔ Version.
Phone Number
Your phone’s hardware and software version information
appears in the display.
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
2. Press
to return to the Phone Info menu.
1. At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your Wireless
Provider appears in the display.
117
ESN / MEID
ᮣ
At the Settings menu, select Phone Info ➔ Refurbish. The
following information appears in the display:
You can view the ESN (Electronic Serial Number)/MEID (Mobile
Equipment Identifier) values for your phone in both Decimal and
Hex values from this menu.
•
Date and Time your phone was last refurbished.
• Refurbish counter — Shows number of times your phone has
been refurbished.
1. At the Settings menu, select Phone Info ➔ ESN/MEID.
The ESN/MEID information displays in Dec and Hex.
2. Press
to return to the Phone Info menu.
Warranty Date Code
Your phone provides a customer warranty date code. The code
(date MM/DD/YYYY and time HH:MM) is populated into the phone
after 10 minutes of CDMA usage time. This Date Code value may
be used to determine the device warranty status.
You can view the Warranty data code for your phone.
ᮣ
At the Settings menu, select Phone Info ➔ Warranty Date
Code
.
The Warranty Date Code information appears in the
display.
Refurbish
If your phone has been refurbished by the manufacturer, your
phone records the date and time it was last refurbished and the
number of times it has been refurbished.
Changing Your Settings
118
Section 16: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
119
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.000 W/Kg.
Body-worn: 1.080 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Health and Safety Information
120
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
121
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
Health and Safety Information
122
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
123
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
Health and Safety Information
124
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
125
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
Health and Safety Information
126
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
127
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Health and Safety Information
128
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
Internet: http://www.nidcd.nih.gov/
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
129
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
UsingYourPhoneNearOtherElectronicDevices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov/niosh/topics/noise/
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
Health and Safety Information
130
•
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
For more information see:
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
131
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
Vehicles
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
Health and Safety Information
132
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
133
phone warranty if said accessories cause damage or a defect to
the phone.
FCC Notice and Cautions
FCC Notice
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Quincy, Massachusetts
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Health and Safety Information
134
Maintaining Your Phone's Peak Performance
Product Performance
Getting the Most Out of Your Signal Reception
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
135
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
•
•
If left unused, a fully charged battery will discharge itself over time.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
Health and Safety Information
136
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
0 °C (32 °F).
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
137
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Health and Safety Information
138
Section 17: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
139
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
140
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
141
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
142
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
143
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
Warranty Information
144
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Precautions for Transfer and Disposal
Phone: 1-800-SAMSUNG (726-7864)
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
©
2009 Samsung Telecommunications America. All rights
reserved.
145
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
146
Index
Shortcuts 67
Card Memory
Formatting 116
Management 115
Open 35
A
C
Adjust
Call Functions
Making a Call — Number Entry
Dialing 18
Making a Call — Quick Search
Dialing 20
Call Settings
Camera
Options 67
Screen 66
B
Battery 4
Charging 5
Removal 5
Bluetooth 83
Connecting 85
Settings 85
D
Display Settings
Backlight 103
Wallpaper 102
Browser 62
147
Image Shuffle3
Wallpaper 102
K
Inbox 53
Outbox 54
Voice 57
Voicemail 57
E
Emergency Calls 18
ESN 118
Messaging
microSD
Formatting 116
microSD™ 7
Mode
Camera 16
Handsfree 16
Lock 17
Silent 15
Speakerphone 16
Standby 14
L
F
G
Language 108
M
Gallery
Photo 73
MEID 118
Melody Shuffle
Memo Pad
Memory Card
Formatting 116
Memory Card (Optional)
Install 7
Message Folder
Getting Started
Voicemail 7
H
Vibrate 16
M-Ratings 131
HAC 131
I
148
Display 101
Using 33
Memory 45
Phone 108
Security 109
Sound 104
Theme 102
Setup
Location 101
Sound Settings
Alerts 105
Take Pictures
Pauses 41
Text
V
Version 117
Voice Service
Launching 96
Voicemail
Checking 57
VoiceSignal
W
Wallpaper 102
Widgets 60
®
Timer
Camera 69
Tools/Utilities
T-Ratings 131
Speed Dialing 20
Standard Limited Warranty 139
T
U
Understanding Your Contacts
Z
T9 Word
150
|