Samsung R810
( S C H - R 8 1 0
S e r i e s )
T R I - B A N D
P H O N E
P O R T A B L E
M O B I L E
User Manual
Please read this manual before operating your
phone, and keep it for future reference.
GH68-22546A
Printed in Korea.
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
Nuance , VSuite™ and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates in the
United States and/or other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
™
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
Message Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
2
FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless
3
Section 1: Getting Started
This section explains how to start using your Samsung phone by
activating your service, setting up your Voicemail, or getting an
understanding of how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and icon
appear in place of repeatedly-used procedural steps:
Understanding this User Manual
The chapters of this manual generally follow the same order as
the menus and sub-menus in your phone. A robust index for
select
Touch a menu item or screen item to launch, access,
or save a highlighted menu item or screen field of
interest.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 156.
➔
Used in place of “select” in long “drill down”
procedure steps.
Notes and Tips
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate your warranty and may
cause damage.
•
•
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Important — Points out important information about the current
feature that could affect performance, or even damage your phone.
Getting Started
4
Use the Travel Adapter
Caution!: The touch screen responds best to a light touch from either a finger
or a non-metallic stylus. Using excessive force or a metallic object
when pressing the touch screen may damage the tempered glass
surface and void the warranty noted (For more information, refer to
The travel adapter included
with your phone is a
convenient, light-weight
charger that rapidly charges
your phone from any 120/220
VAC outlet.
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
1. Plug the large end of the Travel Adapter into a standard
Low battery indicator
120 VAC or 220 VAC wall outlet.
The battery indicator (
) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
Important!: For connection to an electrical supply not located in North
America, you must use an adapter of the proper configuration for
the power outlet. Use of the wrong adapter could damage your
phone and void your warranty.
•
•
•
Five bars (
) indicate a full charge.
An empty battery icon (
) indicates a near empty battery.
) and a tone sounding indicate
A blinking empty battery icon (
you have two to three minutes before the battery is too low to operate
the phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Correct
Activating Your Phone
Incorrect
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector at the bottom end of your
phone.
5
Install the Battery
3. Place the battery cover
over the battery (1) and
slide the battery cover up
into place (2).
Note: Your phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use your
phone, otherwise you could damage the battery. From fully
discharged to fully charged, the battery requires up to 4 hours of
charge time.
Remove the Battery
1. Insert the bottom end of
the battery first,
1. Press and hold
to turn off the phone (if on).
2. Press down on the
battery cover (1), slide the
cover toward the bottom
end of the phone, then lift
it the cover (2) away from
the phone.
matching the gold
contacts on the inside of
the battery to those on
the phone.
2. Press lightly on the top end of the battery down into the
phone until it slips into place.
3. Lift the battery up (1) and
away (2) from the phone,
top end first.
Getting Started
6
Turn Your Phone On
1. Press and hold the LOCK key
Note: If you are outside of your carrier’s coverage or roaming area, the No
Service icon (
) appears at the top of the phone’s display. If you
cannot place or receive calls, try later when service is available, or at
another location.
(
), on the top of the
phone.
Turn Your Phone Off
ᮣ
Press and hold the LOCK key (
), on the top of the
phone, for two or more seconds. Your phone powers off.
Note: As with any other radio-transmitting
device, do not touch the antenna (at the
bottom of the device) while using your
phone as this can affect call quality and
can cause the phone to operate at a higher
power level than is necessary.
Note: If your phone is on and you press
for less than one second, the
phone will not power off. This prevents your phone from being turned
off accidentally.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
2. The phone begins searching for a
network signal.
3. Once the phone finds a signal, the
time, date, and day appear in the
second line of the display.
Note: Once your Voicemail account has been set up, you can use the
Voicemail folder (under the Message menu) to view details of voice
messages in your Voicemail box.
1. In standby mode, touch the Dialer soft key, then touch and
4. You’re now ready to place and
Antenna
hold
or dial your own mobile number to dial
receive calls.
7
2. Follow the prompts in the new user tutorial to setup your
phone, as shown.
mail box.
Listen to Voicemail
1. In standby mode, touch the Dialer soft key, then touch and
hold
or dial your own mobile number to dial
you will hear your voice greeting.
Incorrect
2. You are prompted to enter your password.
Correct
Memory Card (Optional)
TM
You can install a microSD card to provide additional memory
2. Make sure that the gold contacts of the card are face
down, as shown, then carefully slide the memory card into
the memory card slot until you feel it click into place.
for storing files (such as, sound files and photos) in your phone.
Install a Memory Card
1. Open the microSD cover on the right hand side of the
3. Replace the microSD cover.
Remove a Memory Card
1. Open the microSD cover on the right hand side of the
phone.
2. Carefully press the memory card inward until you feel it
release.
Getting Started
8
3. Slowly release your pressure on the card. It will slide
outward a short distance.
4. Remove the memory card from the memory card slot.
6. Replace the microSD cover.
9
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that will be displayed
when the phone is in use.
Side Views of Your Phone
Features of Your Phone
•
•
•
•
Full-screen Touch Screen [high-resolution (240 x400 pixels), color]
Widget menu
Full-HTML Browser
Messaging (Text, Picture, Video, and E-mail) with QWERTY Touch
Keypad
10
•
•
•
•
•
•
•
•
2.0 Megapixel wide screen Camera-Camcorder
High speed data (EVDO)
®
Bluetooth Stereo (v2.0) Wireless Technology (see Note)
Global Positioning (GPS) Technology
PIM Functions
11
12
Voice and Touch Keypad Dial
Music (MP3) Player and Video (MP4) Player
Memory Card slot (for optional microSD™ cards)
Features
1. Headset Connector — Used to connect an optional wired
headset or TTY device to your phone.
Note: Your phone supports the wireless hands-free profile and the serial port
profile for Bluetooth® v2.0 wireless technology. Your phone does not
support Bluetooth OBEX profiles.
Understanding Your Phone
10
2. Power / Accessory Connector — Used to connect charging
accessories or any available accessory cables to your
phone.
8. Power On-Off/LOCK key — Turns the power on and off.
Locks and unlocks the keys and the touch screen and
lights the backlight.
3. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
9. Memory Card Slot — Used to plug in an optional
microSD™ memory card for additional multimedia file
storage.
4. Send Key — Lets you place or receive a call. In standby
10. Voice Recognition Key — Used to launch VoiceSignal voice
mode, press the key once to access the Recent Calls log.
recognition system.
5. Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
11. Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
12. End Key — Ends a call. Returns you to standby mode from
any feature, function, or menu.
6. Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).
7. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
11
2. Volume Key — Lets you adjust the ring volume in standby
mode, adjust the voice volume during a call, or mute the
ringer during an incoming call.
Front View of Your Phone
3. Display — Indicates the status of your phone (including
numbers dialed, feature and function screens, status
icons, message indicators and contents, signal strength,
and so on) and shows all touch controls (hot buttons,
keypads, and menus).
4. Send Key — Lets you place or receive a call. In standby
mode, press the key once to access the recent calls log.
5. Clear Key — Deletes characters from the display when you
are in text entry mode. Press this key to return to the
previous menu or screen when navigating features on your
phone.
6. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
7. End Key — Ends a call. Returns you to standby mode from
any feature, function, or menu.
Features
8. Camera Key — Launches the Camera-Camcorder feature
1. Earpiece / Speaker — Lets you hear ringing and alert
tones, alarm tones, and the other parties to calls.
of your phone and takes pictures or records videos.
Understanding Your Phone
12
9. Voice Recognition Key — Used to launch VoiceSignal voice
2. Mirror — Helps you take self-portrait photos.
recognition system.
3. Battery Cover — Protects the battery.
Rear View
4. Camera Key — Launches the Camera-Camcorder feature
of your phone and takes pictures or records videos.
Command Keys
Power On-Off/LOCK key
•
Press and hold the Power On-Off/LOCK key (
phone on or off.
) to turn your
•
With the phone keys and touch screen locked, press and hold the
Power On-Off/LOCK key ( ) to unlock the phone.
Note: With the phone locked, you can still answer incoming calls by pressing
the Talk key.
Volume Key
•
•
•
•
In standby mode, press the Volume key on the upper left side of the
phone Up or Down to adjust the volume of the incoming calls ringer.
When receiving a call, press the Volume key Up or Down to mute the
ringer.
During a call, press the Volume key Up or Down to adjust the voice
volume in the Earpiece-Speaker.
When playing a music file or video clip, press the Volume key Up or
Down to adjust the playback volume.
1. Camera Lens — The lens of your built-in camera.
13
Soft Keys
End Key
•
Briefly press
once to disconnect a call.
Functions for the soft keys are defined by what appears above
each in the display. There are four soft keys across the bottom of
the display.
•
Press
to return to standby mode from any menu, or to cancel the
last input.
Camera Key
Send Key
Use the Camera key on the right side of the phone to launch the
Camera function on your phone by pressing and holding this key.
The Send key (
recall the last number(s) dialed, received, or missed.
) is used to answer calls, dial calls, and to
•
•
•
Press
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
once to answer calls.
Understanding the Display Screen
1. The top line of your
phone’s display contains
icons that indicate
to make a call.
•
•
Press
Press
twice in standby mode to call the most recent number.
network status, battery
power, signal strength,
connection type, and
to pick up a waiting call. Press
again to switch back
to the other call.
Clear Key
more.
The Clear key (
) is used to erase or clear numbers, text,
2. Tapping the left side of
the display opens the
Widget Bar that lists
available shortcut
widgets.
or symbols from the display. You can also use the key to return to
a previous menu or to return to standby mode from any menu.
•
If you enter an incorrect character, briefly press
backspace (and delete) the character.
to
•
•
To erase the entire sentence, press and hold
.
To return to the previous menu level, briefly press
.
Understanding Your Phone
14
3. The bottom line of the display shows available soft keys.
Dialogue Boxes
The sample screen shows the following soft keys:
Dialogue boxes prompt for action, inform you of status, or warn
of situations such as low battery. Dialogue boxes and their
definitions are outlined below.
• Dialer — Launches the Dialer screen that lets you place calls.
• Contacts — Launches the Contacts list screen.
•
•
•
•
•
•
•
Choice
• Messages — Launches the Messages menu.
–
Example: “Save Message?”
• Menu — Launches the Main Menu.
Reconfirm
4. The center portion of the display shows information such
as call progress information, messages, and photos.
–
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
–
5. Tapping the top line of the display pulls down a four-icon
shortcut bar. To hide the four-icon shortcut bar, tap
anywhere on the screen below the shortcut bar.
–
Display Screen Icons
–
Your phone can show you definitions of the icons that appear on
the top line of the display.
–
Example: “System Error!”
Warning
To access the Icon Glossary:
–
Example: “Low Battery,” “Memory Full!”
ᮣ
In standby mode, press Menu, then touch Settings
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top line of the displays.
➔
Backlight
➔
The backlight illuminates the display. It goes off when the screen
and phone keys are not pressed within a period of time set in the
Backlight Time menu. The backlight turns on when you press a
key.
15
Note: During a phone call, the display backlight dims and turns off after 10
seconds to conserve battery power, regardless of the Backlight Time
setting.
Tip: When using the 3X4Keypad mode, you can also choose between Abc
/
ABC T9 Word, and 123 by pressing the Entry Mode soft key.
,
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
Your Phone’s Modes
Call Answer Mode
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key.
You can choose to answer a call by pressing any key except
or
, or by pressing only the
key. (For more
To enter Lock Mode:
ᮣ
In standby mode, press
on the top of the
Input Mode
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the down arrow in
the upper left corner of the screen, then select the input mode
from the drop-down menu. Optional input modes are:
phone. The lock mode screen
appears momentarily in the
display, then the screen goes
dark.
•
•
•
•
3X4Keypad (phone-style touch keypad)
QWERTY (full touch keypad — changes display to landscape mode)
Handwriting box (divided pallet)
To exit Lock Mode:
ᮣ
While in Lock mode, press
and hold until the
Handwriting full screen (undivided pallet)
standby mode screen
appears in the display.
Understanding Your Phone
16
Enter/Exit Silent Mode
Silences the ringers, the alerts, and the tones your keypad makes
when you press a key.
Standby Mode
To enter Silent Mode:
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into standby mode:
ᮣ
In standby mode, repeatedly press the Volume key
) Down until “Silence All” appears in the display.
•
•
After you power the phone on.
(
When you press the End key after a call or from within a menu.
To exit Silent Mode:
In standby mode, you will see the time, day, and date as well as
all phone status icons.
ᮣ
While in Silent mode and standby mode, repeatedly press
the Volume key ( ) Up until “Silence All
”
Place Calls in Standby Mode
1. In standby mode, enter a phone number, and press
to place a call.
disappears from the display and the desired ringer value
appears.
Vibrate Mode
2. Press
to return to standby mode.
ᮣ
In standby mode, repeatedly press the Volume key
Receive Messages in Standby Mode
(
) down until “Vibrate only” appears in the
While your phone is in standby mode, new incoming messages
automatically appear in the screen as they are received. Use the
Navigation key to scroll through text or to view complete images.
display.
Note: The Volume key is on the left side of phone.
Talk Mode
Adjust the Ringer
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Clear key to
display a list of menu options. (For more information, refer to
To adjust the Ringer volume, while in standby mode, press the
Volume key up or down.
17
ᮣ
In standby mode, press the Volume key up or down to set
the call ringer volume as desired.
•
Exiting Music Player Mode — Press
.
Options are:
Camera Mode
• Silence All
• Alarm only
• Vibrate only
• 1 Beep
• Low/Medium
• Medium
• Medium/High
• High
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
• Low
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The No Ring icon (
) appears in the display when the
•
Entering Camera Mode:
phone is in Silence All mode.
–
–
–
In standby mode, press and hold the Camera key (
right side of the phone.
In standby mode, press the Menu soft key, then touch Multimedia
Camera
In Camcorder mode, touch
) — on the
Music Player Mode
➔
The Music Player in your phone can play music files (MP3), but
only if they are stored in the My Music folder on an optional
microSD Memory Card.
.
.
•
Exiting Camera Mode — Press
.
Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the resolution
and appearance of your videos.
•
Entering Music Player Mode:
–
In standby mode, display the shortcut menu by selecting the status bar
at the top of the display, then touch (
– or –
).
–
In standby mode, press the Menu soft key, then touch Music Player
.
Understanding Your Phone
18
•
•
Entering Camcorder Mode:
3. Select the desired video. The Video Player screen appears
–
–
–
In standby mode, press and hold the Camera key (
right side of the phone — then, select
In standby mode, press the Menu soft key, then touch Multimedia
Camcorder
In Camera mode, press
) — on the
in the display and begins playing the highlighted video.
.
➔
.
Speakerphone Mode
.
Exiting Camcorder Mode — Press the
key.
Lets you use your phone handsfree and/or lets you share a call
with other people nearby.
Video Player Mode
To enter Speakerphone Mode during a call:
The Video Player in your phone can play video files [3GS, MP4,
H.263, and H.264 (Decoding: QCIF Only)], but only if they are
stored in the My Video folder in the phone or on an optional
microSD Memory Card.
1. During a call, press LOCK key (
phone, or press
2. Press the Speaker on key (
), at the top of the
.
). The Speaker on icon
changes color from black to blue, and the other party can
be heard through the speaker.
•
Entering Video Player Mode:
Caution!: Keep the phone away from you ear while in Speakerphone Mode.
1. In standby mode, press Menu, then touch Multimedia
➔
My
Videos
.
– or –
To exit Speaker Mode:
In camcorder mode, press
.
ᮣ
During a call using Speakerphone mode, press the Speaker
on key ( ). The Speaker on icon changes color to black
and the other party cannot be heard through the speaker.
A list of thumbnail images appears in the display.
2. Tap the thumbnail icon to view the thumbnail images.
19
Section 3: Call Functions
This section explains how to make or answer a call. This section
also includes the features and functionality associated with
making or answering a call.
1. In standby mode, touch the Dialer soft key. The touch
keypad screen appears in the display.
2. Enter 911 using the touch keypad.
Making a Call — Number
Entry Dialing
3. Touch
or the Voice Call soft key to place the call.
1. In standby mode, touch the
Dialer soft key. The touch
keypad screen appears in the
display.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
2. Enter the number you wish to
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
call using the touch keypad.
3. Touch
or the Voice Call
soft key to place the call.
Dialing Emergency Numbers
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communications.
When you call an Emergency Number, such as 911, your phone
locks itself in emergency mode, only allowing you to make calls
to the emergency call center you originally contacted. This
enables emergency operators to more easily dispatch aid, such
as police, fire fighting, and emergency medical personnel.
Note: You can specify other numbers than 911 as emergency numbers using
Call Functions
20
Manual Pause Calling
Tip: You can create pauses longer than two seconds by entering multiple 2-
Sec Pauses.
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
4. Select the desired pause option. The respective letter (W or
P) is added to your number entry.
5. Touch
or the Voice Call soft key to call the number.
•
Wait — Hard Pause — Stops the calling sequence until you touch
.
Making a Call — Contact
Dialing
You can store phone numbers and
contact names in your phone’s
Contacts list. To call one of your
contacts, do the following:
•
2-Sec Pause — Stops the calling sequence for two seconds and then
automatically sends the remaining digits.
To manually call a number with pause(s) without storing it to your
Contacts:
1. In standby mode, touch the Dialer soft key. The touch
1. In standby mode, touch the
Dialer soft key. The touch
keypad screen appears in the
display.
keypad screen appears in the display.
2. Enter the number you wish to call.
3. Touch the Add Pause soft key.
A pop-up menu containing the following options appears in
the display:
2. Touch the Contacts button
(
). The Contacts list
•
•
Wait
appears in the display.
2-Sec Pause
3. Touch the desired Contact entry, then touch Add
.
21
4. To select a number other than
the marked Contacts entry’s
default number, touch the
radio button to the right of the
number you want to display
and touch Add. The entry’s
information appears in the
display.
Example: For Speed Dial number 003, touch the Dialer soft key, then press
and hold until the name and number appear in the display
and the number is dialed.
Two-Touch Dialing
Memory locations 010 through 030 are special Two-Touch
dialing locations.
Example: For Speed Dial number 013, touch the Dialer soft key, then briefly
touch
, then press and hold
until the name and number
appear in the display and the number is dialed.
•
Touch the entry you wish to dial.
5. Touch Voice Calls
.
Pause Dialing From a Contacts Entry
The number dials.
•
If you speed dial a contact that contains hard Waits, wait for the
appropriate prompt(s) from the number you are calling (credit card
Making a Call — Speed Dialing
number, bank account number, and so on) and touch
your dialing sequence.
to continue
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s Favorites number in the list.
You can assign and change Favorites (speed dial) numbers for
•
If you speed dial a contact that contains 2-Sec Pause(s) simply wait for
the pauses to pass and the dialing to complete.
One-Touch Dialing
Speed Dial numbers 002 through 009 are special One-Touch
dialing numbers. You can call the phone numbers stored in your
phone’s Contacts list and assigned Speed Dial numbers 002
through 009 by pressing and holding a single key.
Call Functions
22
Favorites Screen Dialing
3. Find and touch the desired
Favorite. Two buttons pop-up
in the display.
You can also dial Contacts entries
with assigned Speed Dial numbers
from the Favorites screen.
4. To call the selected Favorite,
1. In standby mode, touch the
Dialer soft key. The touch
keypad screen appears in the
display.
touch
.
2. Touch the Favorites button
(
). The Favorites
screen appears in the display.
Making a Call — Voice Dialing
Your mobile phone includes state-of-the-art voice recognition
software that lets you dial numbers using your voice.
Using Voice Dial
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your contact list, by speaking the
individual digits in the number (Digit Dialing).
23
Voice Dialing Tips:
•
•
•
Say “No” to hear the next name.
•
•
Wait for the beep before speaking.
Say “Repeat” to hear the names again.
Say “Cancel” to exit Voice Service without dialing.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
Dialing a Name
If the recognized/selected name has multiple numbers
stored for it (that is, Home, Work, Mobile, and so on), Voice
Dial displays the possible choices and prompts you with
“Try again?”
To dial a name, do the following:
1. In standby mode, touch the Voice Recognition key (
).
“Say a Command” appears in the display and is
pronounced through the earpiece.
5. Say one of the following number types:
2. Say, “Call”. You are prompted to “Say the name or #”.
•
•
•
“
Home
Work
Mobile
”
3. Speak clearly and say the name of a person in your
“
”
Contacts list, first name followed by last name.
“
”
Voice Dial dials the specified number.
If the name is recognized, Voice Dial repeats the name and
dials the number.
Dialing a Number
To dial a number using Voice Dial, do the following:
If Voice Dial is not sure which name you said, it prompts
1. In standby mode, touch the Voice Recognition key (
).
you with “Please try again.”
“Say a Command” appears in the display and is
4. Do one of the following:
pronounced through the speaker.
•
•
Touch one of the name buttons.
Say “Yes” to confirm the first name.
Call Functions
24
2. Say “Call”. VoiceSignal prompts you to “Say the name or
•
If you voice dial a contact that contains (two-second) 2-Sec Pause(s)
simply wait for the pauses to pass and the dialing to complete.
#”.
Answering a Call
3. Speak clearly and say the telephone number of the person
Your phone notifies you of a call in the following ways:
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."
•
A ring tone sounds and/or your phone vibrates (Your phone provides
nine ring volume settings including: Silent all Alarm only Vibrate
only 1 Beep Low Low/Medium Medium Medium/High, or
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays and prompts you with “Call?” followed
by a choice list of up to three numbers.
,
,
,
,
,
,
,
High, and/or different ring types to distinguish callers.)
•
A phone number (unless blocked by the caller) and a name appear in
the display (If the caller’s number and name are stored in your
Contacts list).
4. Do one of the following:
•
•
•
•
•
Touch one of the number buttons.
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
Say “Yes” to confirm the first number.
Say “No” to hear the next number.
Say “Repeat” to hear the numbers again.
Say “Cancel” to exit Voice Service without dialing.
•
•
•
•
You answer the call.
You ignore the call.
The calling party ends the call.
The call is sent to voicemail.
Pause Dialing From a Contacts Entry
Answering an Incoming Call
•
If you voice dial a contact that contains hard Waits, wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
ᮣ
Touch the
key. The ring tone and/or vibration stop
and the caller’s voice can be heard in the earpiece.
25
Review the Calls Log
1. In standby mode, touch the
Menu soft key, then touch
Calls. The Calls list appears
in the display showing All
calls.
Tip: You can set your phone to answer calls automatically or when you touch
any key but
Ignoring a Call
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
ᮣ
During an incoming call, touch the
forwarded to your voice mail.
key. The caller is
2. Touch the Down arrow in the
upper right corner of the
screen. The following Calls
log options appear in a drop-
down menu:
Adjusting the Call Volume
ᮣ
In standby mode, repeatedly touch the Volume key Down
until the Call Volume Level desired appears in the display.
The Volume key is on the left side of phone.
•
•
•
•
All
Incoming
Outgoing
Missed
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
• Data
Note: To review your Call Timers or Data Counters, touch the Call Timer soft
key or the Data Counter soft key.
3. Select the Calls log that you wish to review.
Call Functions
26
Note: In cases where a Calls log entry concerns a call to or from a Contacts
entry, the Contact name associated with the number appears in the
Calls log list instead of the number.
Note: In standby mode, you can quickly view your most recent calls of all
types by briefly touching
. A list containing up to 270 of your
most recent outgoing, incoming, and missed calls appears in the
display.
4. The following functions are also available:
1. In standby mode, touch the Menu soft key, then touch
Calls. The Calls list appears in the display showing All
calls.
• Erase — Touch this soft key to delete selected or All unlocked calls
from the displayed call log.
• Lock Unlock — Touch this soft key to block/permit deletion of
/
individual calls.
2. Touch the Down arrow in the upper right corner of the
screen, then touch Outgoing. A list of Outgoing Calls
appears in the display.
• Call Timer — Touch this soft key to list the duration of the Last
Call; total durations of all Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls since the timers were last reset; the date and time
the timers were last reset; and the total duration of Lifetime Calls (all
calls since your phone was activated — this timer cannot be reset).
3. Select a call to view further
information about it. The call
information screen shows the
recipient’s name (Contacts
only), the number dialed, the
time and date the call was
made, and the duration of the
call.
• Data Counter — Touch this soft key to list the amount of data (in
kilobytes) Transmitted, Received, and Total data transferred since
the timers were last reset; the date and time the timers were last
reset; and the total amount of data transferred in Lifetime Data
Counter (all data calls since your phone was activated — this timer
cannot be reset).
Outgoing Calls
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
27
4. The call information screen offers the following options:
Incoming Calls
•
•
— Touch to dial this number.
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming calls log. You can review the
Incoming calls log for the time and date of the call, as well as
other information.
— Touch to send a Text, Picture, or Video message to this
•
•
•
•
•
Contacts only — To view Contact information for this call, touch the
View details soft key.
1. In standby mode, touch the Menu soft key, then touch
Calls. The Calls list appears in the display showing All
calls.
To add the number to your Contacts list, touch the Add To Contacts
soft key.
2. Touch the Down arrow in the
To delete the selected call from your Outgoing calls log, touch the
Erase soft key.
upper right corner of the
To block / permit deletion of the selected call, touch More, then
screen, then touch Incoming
.
Lock Unlock.
/
A list of Incoming Calls
appears in the display.
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, touch More, then
Copy to dialer
.
3. Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
Note: When viewing an outgoing call to a Contact, touch More to access the
Lock Unlock and Copy to dialer options.
/
5. To review another Outgoing call, touch the Left and Right
arrow keys at the top of the screen.
from, the time and date the
call was received, and the duration of the call.
Call Functions
28
4. The call information screen
5. To review another Incoming call, touch the Left and Right
offers the following options:
arrow keys at the top of the screen.
•
— Touch to dial this
Missed Calls
number.
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
calls log. You can review the Missed calls log for the time and
date of the call, as well as other information.
•
— Touch to send a
Text, Picture, or Video message
to this number. (For more
information, refer to “Creating
1. In standby mode, touch the Menu soft key, then touch
Calls. The Calls list appears in the display showing All
calls.
•
To add the number to your
Contacts list, touch the Add To
Contacts soft key.
2. Touch the Down arrow in the upper right corner of the
screen, then touch Missed. A list of Missed Calls appears in
the display.
•
•
•
•
Contacts only — To view
Contact information for this call, touch the View details soft key.
To delete the selected call from your Incoming calls log, touch the
Erase soft key.
To block / permit deletion of the selected call, touch the Lock
Unlock soft key.
/
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, touch the Copy to
dialer soft key.
Note: When viewing an incoming call from a Contact, touch the More soft key
to access the Lock Unlock and Copy to dialer options.
/
29
3. Select a call to view further
information about it. The call
information screen shows the
caller’s name (Contacts only),
the number called received
from, the time and date the
call was received, and the
duration of the call.
•
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, touch the Copy to
dialer soft key.
Note: When viewing a missed call from a Contact, touch the More soft key to
access the Lock Unlock and Copy to dialer options.
/
5. To review another Incoming call, touch the Left and Right
arrow keys at the top of the screen.
All Calls
4. The call information screen
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
offers the following options:
•
— Touch to dial this
number.
1. In standby mode, touch the Menu soft key, then touch
•
— Touch to send a Text, Picture, or Video message to this
Calls. The Calls list appears in the display showing All
calls
.
2. Select a call to view further information about it. The call
information screen shows the caller’s name (Contacts
only), the number called (by), the time and date the call
was made / received, and the duration of the call.
•
•
•
•
To add the number to your Contacts list, touch the Add To Contacts
soft key.
Contacts only — To view Contact information for this call, touch the
View details soft key.
To delete the selected call from your Missed calls log, touch the
Erase soft key.
3. The call information screen offers the following options:
To block / permit deletion of the selected call, touch the Lock
Unlock soft key.
/
•
— Touch to dial this number.
Call Functions
30
•
— Touch to send a Text, Picture, or Video message to this
2. Touch the Down arrow in the upper right corner of the
screen, then touch Data. A list of Data Calls appears in the
display.
•
•
•
•
•
To add the number to your Contacts list, touch the Add To Contacts
soft key.
3. Select a call to view further
information about it. The call
information screen shows the
the number called or called
by, the time and date the call
was placed or received, and
the duration of the call.
Contacts only — To view Contact information for this call, touch the
View details soft key.
To delete the selected call from your Calls log, touch the Erase soft
key.
To block / permit deletion of the selected call, touch the Lock
Unlock soft key.
/
To copy this number to the Dialer screen so that you can make
changes (such as, to add Pauses) before reuse, touch the Copy to
dialer soft key.
4. The call information screen
offers the following options:
4. To review another call, touch the Left and Right arrow keys
•
To delete the selected call from
your Data calls log, touch the
Erase soft key.
at the top of the screen.
Data Calls
•
•
To block / permit deletion of the selected call, touch the Lock
/
You can review all of the data calls log entries for the time and
date of a call, as well as other information.
Unlock soft key.
To review the amounts of data Transmitted, Received, Total
1. In standby mode, touch the Menu soft key, then touch
Calls. The Calls list appears in the display showing All
calls.
exchanged since the last time the counters were reset, the date
and time the counters were last reset, and the Lifetime data count,
touch the Data Counter soft key.
31
5. To review another Data call, touch the Left and Right arrow
3. Touch the Reset soft key to reset all counters except
keys at the top of the screen.
Lifetime Calls.
Call Timer
Note: Although Total Calls timers can be erased, the Lifetime Calls timer can
never be erased.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
Data Counter
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
Note: Call Timer is not for billing purposes.
1. In standby mode, touch Menu ➔ Calls.
2. Touch the Call Timer soft key. The following options appear
in the display:
Note: Data Counter is not for billing purposes.
•
•
Last Call — View the duration of your last call.
1. In standby mode, touch Menu ➔ Calls.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since all timers were last reset.
2. Touch the Data Counter soft key. The following options
•
•
•
Incoming Calls — View the duration of the total incoming calls
appear in the display:
received on your phone since all timers were last reset.
•
•
•
•
Transmitted — View the total amount of data transmitted by your
Roaming Calls — View the total calls duration on your phone
while roaming since all timers were last reset.
phone since the last reset.
Received — View the total amount of data received by your phone
since the last reset.
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since all timers were last reset.
Total — View the total amount of data sent or received by your
phone since the last reset.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Calls — View the number and total duration of all calls
since your phone was activated.
Last Reset — View the time and date all timers were last reset.
Call Functions
32
•
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
•
•
<Carrier> Only — Your phone is available for normal operation only in
the designated coverage area.
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
3. Touch the Reset soft key to reset all counters except
Lifetime Data Counter.
Note: Although Total data counters can be erased, the Lifetime Data Counter
can never be erased.
Roaming
What is Roaming?
Roaming lets you use your phone when you travel outside of your
Wireless Provider’s coverage area. The Roaming icon (
)
appears in the top line of the display when Roaming is active,
and extra charges may apply when making or receiving calls.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
33
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
describes the menus available with your phone.
Using the Widget Bar
1. In standby mode, touch the
right arrow tab on the left
edge of the display. The
Main Menu Navigation
Access menus using the Menu soft
key, other soft keys, or icons on the
Widget Bar or Shortcut Bar.
Widget Bar slides open to the
right and lists icons for those
Widgets selected in the
1. In standby mode, touch the
Menu soft key. The Main
Widget settings. (For more
Menu appears in the display.
2. Select icons or menu options
to access a menu or submenu
shown in the display.
Tip: You can hide or display individual widgets by changing the Widget
Return to the Previous Menu
Touch
to return to the previous menu.
2. Scroll through the Widget list by touching and sliding
within the Widget Bar until a desired Widget icon appears.
Menu Navigation
34
3. Touch, hold, and slide the
icon to the right until it is free
of the Widget Bar. The icon
now displays on the standby
screen and expands in size.
The In-Use Options
Access numerous menus and
features even while in a call.
Note: If the call is disconnected while
accessing the In-Use Option, the In-
Use Option disappears from the
display and the phone eventually
returns to standby mode.
Note: You can position a Widget icon as
needed by touching, holding, and
sliding it.
1. While in a call, the following
buttons and soft keys appear
in the display when you touch
:
4. Touch a Widget icon on the
standby screen to launch its
function.
Note: You can return a Widget icon to the Widget Bar simply by touching,
holding, and sliding the icon until it overlaps the Widget Bar.
Turns Speakerphone mode On/Off. (For more
5. Close the Widget Bar by touching the left arrow tab or by
touching
.
With Bluetooth on and a Bluetooth headset
connected with your phone, switches the call
sounds to the Bluetooth Headset.
35
•
Send DTMF — Sends your phone number as DTMF tones to the other
party to the call.
With Bluetooth on and a Bluetooth headset
connected with your phone, switches the call
sounds from the Bluetooth Headset and back to
the phone.
Using Shortcuts Bar
Shortcuts are special icons that you
can use to launch particular phone
features and functions. You can
initially access the shortcuts on your
phone by displaying the Shortcuts
Bar.
Mutes/unmutes the microphone on your phone.
Allows you to speak to someone else without
being overheard by the other party on your call.
Opens the Memo Pad. (For more information,
Shortcut Bar
The Shortcut Bar is an easily
accessed list of icons that acts like a
menu for accessing particular phone
features and functions.
Launches the Messages menu. (For more
Ends the current call and returns the phone to
Standby mode.
1. To open the Shortcut Bar, tap
the folder tab located on the upper line of the standby
screen. The Shortcut Bar drops down, revealing the
following available shortcut icons.
Soft Keys
The following soft keys are available during a call:
•
Dialer — Opens the Dialer screen to enable you to place another call
while the current call remains active.
Opens the Messages Inbox folder, letting you
access your received messages. (For more
•
•
Contacts — Opens the Contacts list screen.
Add To Contacts — Lets you add the other party’s number to your
Contacts list.
Menu Navigation
36
Launches the WEB browser. (For more
Launches the Music Player. (For more
2. To close the Shortcut Bar, tap the folder tab again or touch
.
37
Section 5: Understanding Your Contacts
This section explains how to manage your daily contacts by
storing their name and number in your Contacts. Contacts entries
can be sorted by name.
•
•
Enter the first few letters of the Contact’s name. A list of Contacts
with names matching the letters you entered appears below the
Search field.
Select the desired Contact to display it’s information.
Your Contacts List
Your Contacts list can store up to 500 entries, with each contact
having up to five associated phone numbers, an e-mail address,
and a picture ID.
Adding a New Contacts Entry
You can add an entirely new entry to your Contacts list or add
information to an existing entry.
Using the Contacts Add Option
1. In standby mode, touch the Contacts soft key. The Contacts
screen appears in the display.
Each phone number can be up to 32 digits in length, including
hard pauses. Contact names can be up to 32 characters in
length. You can also specify a memory location for each entry,
and you can restrict access to the Contacts list to prevent
unauthorized use.
2. Touch the New Contact soft key. The New Contact screen
appears in the display.
Tip: One-Touch and Two-Touch Dialing allow you to call numbers stored in
your Contacts list faster. (See page 22.)
Open Your Contacts List
1. In standby mode, touch the Contacts soft key. The Contacts
screen appears in the display.
2. To find a Contact, touch the Search field. The 3x4 Keypad
screen appears in the display.
Understanding Your Contacts
38
3. Touch the Name field. The
3X4 Keypad text entry screen
appears in the display.
7. If desired, assign the new
Contact to a Group. This lets
you send messages to and
find this Contact and other
related contacts. (For more
•
If desired, select another text
entry screen. (For more
information, refer to “Changing
4. Enter a name or phrase to
associate with the new
•
The Select Group screen
appears in the display. The
following groups are available:
–
–
–
–
–
New Group
Family
Friends
5. Touch a phone number field (Mobile Mobile 2, Home, Work,
,
Colleagues
Business
or Fax) or the e-mail address (E-mail) field. The 3X4
•
Select the preferred group. A message pops-up confirming the
group assignment for this Contact.
Keypad text entry screen appears in the display.
•
If desired, select another text entry screen. (For more information,
8. If desired, select a unique Ringtone or voice memo file to
39
9. If desired, enter an additional phone number (Mobile 2
,
1. After you touch
to end your call, the call time, length
Home Work, or Fax) or e-mail address (Email) for the new
,
of call, phone number, and name of the other party (if
available) appear in the display.
Contacts entry.
10. If desired, select an identifying image by selecting the
2. Touch the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
photo ID field. The following options pop-up in the display:
• Take Photo — Launches the Camera so you can take a photo for
this Contact.
• Add New Contacts — Lets you create a new Contacts entry.
• My Images — A Select list of all of your photos appears in the
• Update existing — Lets you add the number or e-mail address
you just entered to an existing Contacts entry.
–
–
To preview a photo, select it; then, to set the photo ID, touch the Set soft
key.
Tip: You can also store a phone number from standby mode by entering the
number, and touching the Save soft key.
To set a photo in the list as photo ID for this Contact, select the check
circle to the right of the photo (a blue dot appears in the circle), then
touch the Set soft key.
Creating a new Contacts entry:
3. Touch Add New Contacts. The New Contact screen appears
in the display with the number you’re saving populating
the Mobile field.
11. To save the new Contacts entry, touch the Save soft key.
Saving a Number from a Call
Once you’ve finished a call, you can save the number of the
caller to your Contacts list.
4. To save the number as other than the first Mobile number,
touch the button (
)
Note: If the call was incoming and Caller ID information was unavailable,
then the Save option is also unavailable.
Understanding Your Contacts
40
The following (number type) icons appear in the display:
6. Touch Update Existing. The
Contacts screen appears in
the display showing your
current Contacts list.
Mobile
Fax
Home
Work
7. Touch the Search field and
enter the first few characters
of the Contacts entry name
under which you will store the
saved number. (For more
5. Select the number type that matches your new entry. The
New Contact screen appears in the display with the
number being save populating the selected number type
field. (For more information on creating a new Contacts
information on finding a
Adding the number to an existing Contacts entry:
8. Select the desired Contacts entry. The following (number
type) icons appear in the Update Existing screen:
Mobile
Fax
Home
Work
9. Select the appropriate unassigned number type. The
Contact screen appears in the display.
41
10. Make any added changes you wish to the Contacts entry.
4. Touch the number you wish to store in your Contacts list.
The associated Call Information screen appears in the
display.
11. To save the Contacts entry, touch the Save soft key.
5. Touch the Add To Contacts soft key. The Add To Contacts
screen appears in the display showing the following
options:
Storing Number from a Calls Log
You can store numbers from the Calls logs to your Contacts.
1. In standby mode, touch the Menu soft key, then touch
Calls. The Calls list appears in the display showing All
calls.
• Add New Contacts — Lets you create a new Contacts entry.
• Update Existing — Lets you add the selected number to an
existing Contacts entry.
2. Touch the Down arrow in the upper right corner of the
screen. The following Calls log options appear in a
drop-down menu:
Finding a Contacts Entry
Voice Method
•
•
•
•
•
All
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Incoming
Outgoing
Missed
Data
Note: The Lookup command shows the requested contact information in the
display but does not dial any phone numbers for the contact.
3. Touch the Calls log that you wish to review.
To look up information for a specific contact:
1. In standby mode, touch the Voice Recognition key (
).
Understanding Your Contacts
42
“
Say a Command” appears in the display and is
Keypad Methods
pronounced through the speaker.
2. Say “Lookup”.
Find by Name
If you have stored a named contact in your Contacts list, Find lets
you locate the entry quickly.
VoiceSignal prompts you to “Say the name or #.”
1. In standby mode, touch the Contacts soft key. The Contacts
screen appears in the display with an alphabetical list of
Contacts showing.
3. Speak clearly and say the full name of the person you want
to call, exactly as it is entered in your contact list.
•
If VoiceSignal recognizes the name you said, the contact
information for that name appears in the display.
2. Touch the Search field and enter the first few characters of
the name of the contact as it appears in your Contacts list.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Example: If you saved a contact name as “Amy Smith”, begin your search for
that contact by touching
for “A”.
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
Note: As you enter letters, the entry names of the closest matches (thus far)
appear in the display.
3. When the desired Contacts entry is listed in the display,
•
•
To say the name again, touch the Repeat soft key.
To exit VoiceSignal without dialing, touch
press do one of the following
.
•
•
•
To dial the number associated with the named Contact, touch
To send a text, picture or video message, touch
.
5. The contact information for the name you selected appears
.
in the display.
To change the information about the Contact, select the Contact
entry and touch the Edit soft key.
43
Group
•
•
To rename the Group, touch the Rename soft key.
To remove this Group and return all its members to the General
group, touch the Erase soft key.
This option lets you find a Contacts
list entry with a specific Group
name.
•
To send a text or picture message to selected Contact(s) in the
current Group, touch
.
1. In standby mode, touch the
Contacts soft key. The Contacts
screen appears in the display
with an alphabetical list of
Contacts showing.
6. Select the desired option to enter that option’s sub-menu.
Editing an Existing Contact Entry
Once stored in the Contacts, an entry can be changed quite
easily.
2. Touch the Down arrow button
at the top right corner of the
screen.
2. Highlight a number stored in this contact entry.
3. Touch the Groups option. The
3. Touch the Edit soft key. The Edit Contact screen appears in
Groups screen appears in the display.
the display with the contact name highlighted.
4. Touch the group you wish to browse. The selected Group
4. To backspace and delete numbers, touch
.
list appears in the display.
5. To clear all numbers in the highlighted field, press and hold
5. Do one of the following:
.
•
To add an existing contact entry to the Group, touch the Add
Member soft key.
Note: You can also add numbers (such as a second Mobile number or a Fax
number) to the entry, assign it to a Group, and add other information.
•
To delete a contact from the Group, touch the Remove member
soft key. (Does not apply to the General group.)
Understanding Your Contacts
44
6. When you’re finished editing the entry, touch the Save soft
key. Your changes are saved and a confirmation message
appears in the display.
2. Touch the Add Pause soft key.
The following menu options pop-up in the display:
•
•
Wait
2-Sec Pause
Adding Pauses to Contacts Numbers
3. Select the desired pause option. The respective letter (W or
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
P) is added to your number entry.
4. When you’re finished entering the number and pauses,
touch the Save soft key to store the number in your
Contacts
.
•
Wait — Hard Pause — Stops the calling sequence until you touch
.
Add Pauses to an Existing Contacts Entry
•
2-Sec Pause — Stops the calling sequence for two seconds and then
automatically sends the remaining digits.
Tip: You can enter multiple two-second pauses to extend the length of a
pause. For example, two consecutive two-second pauses cause a total
pause time of four seconds.
2. Touch the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
Note: Keep in mind that pauses count as digits towards the 32-digit
3. Highlight a number stored in this contact entry.
maximum.
4. Use the Left and Right navigation keys to place the cursor
where you want to add a pause (usually at the right-hand
end of the number).
Store Pauses in a New Contacts Entry
1. In standby mode, enter the number you wish to store (such
as your bank’s teleservice number).
5. Touch the Add Pause soft key.
45
The following menu options pop-up in the display:
5. Touch the Done soft key to add the number or Email
address to the existing entry.
•
•
Wait
2-Sec Pause
Edit an Existing Email Address
6. Select the pause option of your choice to enter it into your
number sequence.
7. Touch the Done soft key.
8. When you’re finished entering pauses, touch the Save soft
key to save your changes to the number in your Contacts
list.
2. Touch the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
3. Highlight the E-mail field (labeled with the @ symbol).
Add a Number or Email Address to an Existing Entry
•
•
To insert the @ symbol, touch the Symbols soft key and touch
@.
To add the domain type to the end of the Email address, touch the
Shortcuts soft key, then select the desired domain type (.com, .net,
.org, .gov, .edu).
2. Touch the Edit soft key. The Edit Contact screen appears in
the display with the contact name highlighted.
5. Touch the Done soft key to enter your changes, then touch
3. Highlight a number field or the Email field in this Contacts
the Save soft key to save them.
entry.
4. Enter the phone number or e-mail address for the new
Contacts entry.
Understanding Your Contacts
46
2. Touch a Speed Dial number.
The Contacts screen appears in
the display.
Speed Dial Numbers
You can assign and change Speed
Dial numbers for Contacts entries.
Assigning a Speed Dial Number
1. In standby mode, touch the
Dialer soft key, then touch the
3. Find and touch a Contact entry.
selected Contact’s check
circle.
Favorites button (
). The
Favorites list appears in the
display.
4. Touch the Add soft key. You are
returned to the Favorites
Tip: To scroll the Favorites list, touch the Volume key (on the left side of the
phone) Up or Down.
screen with the newly assigned
Contact showing.
47
Changing Speed Dial Numbers
1. In standby mode, touch the
Dialer soft key, then touch the
3. Touch and drag one or more
Contacts to other Favorites
positions.
Favorites button (
). The
Favorites list appears in the
display.
2. Touch the Change Order soft
key. The Favorites list changes,
as shown.
Note: The Voicemail favorite (1) is
deactivated to prevent you changing it.
4. Touch the Change soft key. The
changed Favorites list appears
in the display.
Tip: To scroll the Favorites list, touch the Volume key (on the left side of the
phone) up or down.
Understanding Your Contacts
48
Removing Speed Dial Numbers
1. In standby mode, touch the
Dialer soft key, then touch the
3. Touch the Remove button (
for one or more assigned
Favorites.
)
Favorites button (
). The
Favorites list appears in the
display.
2. Touch the Remove soft key. The
Favorites list changes, as
shown.
Note: The Voicemail favorite (1) is
deactivated to prevent you removing it.
4. Touch the Remove soft key. The
changed Favorites list appears
in the display.
Tip: To scroll the Favorites list, touch the Volume key (on the left side of the
phone) Up or Down.
49
7. Touch the Save soft key to save the changed group name.
Renaming a Contacts Group
Use this option to rename a Group in your Contacts list.
1. In standby mode, touch the Menu soft key and touch
Contacts. The Contacts screen appears in the display with
an alphabetical list of Contacts showing.
Deleting a Contacts Entry
2. Touch the Down arrow button at the top right corner of the
2. Touch the Erase soft key, the Select to erase screen
screen. The Groups screen appears in the display.
appears in the display.
• General
• Family
3. Select the Contact to delete by touching
.
4. Touch the Erase soft key. You are prompted to confirm the
• Friends
erasure.
• Colleague
5. To erase this contact, touch the Yes button.
• Business
Sending a Contacts Entry
3. Touch the Rename soft key.
Use the Send Name Card With Bluetooth option to send one or
more selected Contacts entries to another, compatible phone or
other device over a Bluetooth connection.
4. Select the Group (other than No Group) that you want to
rename, then touch the Rename soft key.
5. The Rename Group text entry screen appears in the display.
The current name of the selected Group populates the text
field.
2. Touch the Send Name Card soft key. The Select to send
screen appears in the display.
Understanding Your Contacts
50
3. Select the Contacts entry you wish to send. A check mark
appears in the entry’s check box. Repeat this step for all
other Contacts entries you wish to send.
4. When you have marked all the entries you wish to send,
touch the Send soft key. The Choose device screen
appears in the display.
5. Select the receiving device. Your phone automatically
connects with the other device and sends the selected
Contact entry(ies).
Memory Status
Use the Memory sub-menu to view the number of Contacts
entries you have stored, as well as the remaining memory.
1. In standby mode, touch the Contacts soft key. The Contacts
screen appears in the display.
2. Touch the Down arrow button at the top right corner of the
screen and touch More
➔
Memory status. The Memory
status screen appears in the display, showing the amounts
of memory used and remaining for Contacts entries.
51
Section 6: Entering Text
This section describes how to select the desired text entry mode
and screen when using these options: the phone-style touch
keypad, the QWERTY touch keypad or the divided or full-screen
handwriting recognition panel.
This is the phone-style touch keypad for entering text, numbers,
and/or characters (such as punctuation and polarity signs) that
you can access by doing the following:
1. From the Phone Touch Keypad screen or from either of the
Changing Text Entry Screens
Handwriting Recognition screens, touch the down arrow
Phone-Style (3X4) Touch Keypad
button (
) (at the upper right corner of the screen).
The following options appear in the display:
• 3X4 Keypad — Displays the phone-style touch keypad.
• QWERTY — Displays the keyboard-style touch keypad, in
landscape mode.
• Handwriting box — Displays the divided text entry screen with the
handwritten text entry field at the bottom. Recognized text appears
in the upper field.
• Handwriting full screen — Displays the full-screen handwritten
text entry field. Both handwritten text and the recognized text
appear in the same field.
2. Select 3X4 Keypad. The phone-style touch keypad appears
and the display automatically rotates to show information
in a wider, landscape format.
Entering Text
52
Built-in QWERTY Keypad
Your phone has a keyboard-style touch keypad, commonly called
QWERTY, this is the default text entry screen for most features
and functions that require you to enter text, numbers, and/or
characters (such as punctuation and polarity signs).
Using the QWERTY keypad, you can type letters, numbers,
punctuation, and other special characters into text entry fields or
other applications more simply and faster than using the phone-
style keypad.
Note: Your phone’s Browser function requires you to use the QWERTY
keypad. Other functions requiring text entry (such as, Messaging and
Memo Pad) accept text entry from whichever keypad you prefer.
Changing Text Entry Screen Using QWERTY Keypad
ᮣ
From the QWERTY touch keypad, change to another text
entry screen by pressing one of the following keys:
3X4 Keypad — 3X4 (phone-style) touch keypad
Handwriting box screen
screen
—
Divided handwriting recognition
• Handwriting full screen — Full-screen handwriting
recognition screen — In the Handwriting box screen,
press
, then select Handwriting full.
53
Accessing the Full-Screen Handwriting Recognition Screen
Handwriting Recognition Screens
Your phone also can recognize print handwriting. Just print
letters or numbers, and your phone translates it to text in a
screen font.
The full-screen Handwriting
Recognition screen offers an
integrated message text and
handwriting input field.
Accessing the Divided Handwriting Recognition Screen
Entering Text Using Handwriting
Recognition Screens
The divided Handwriting
Recognition screen offers separate
message text (upper) and dedicated
handwriting (lower) fields.
1. Using a stylus, print your text
in the handwriting entry field.
The phone replaces your
1. From the Phone Touch
Keypad screen or from the
full-screen Handwriting
handwriting with printed text.
2. To enter numbers, press
Recognition screen, touch the
then print numbers.
down arrow button (
) (at
3. To enter letters, press
or
then print words.
the upper right corner of the
screen), then touch
4. To change the case of letters you enter, press
or
.
Handwriting box
.
Note: The only symbol handwriting recognition screens accept is a period.
2. From the QWERTY Touch Keypad screen, press
.
5. To enter a space, press
.
6. To move to a new line, press
.
7. To delete text, press
.
Entering Text
54
–
–
–
T9 Word — Enter initial capital letters (indicated by
T9 word — Enter all lower case letters (indicated by
T9 WORD — Enter all upper case letters (indicated by
on keys)
on keys)
on keys)
8. When you are finished writing your text, touch the Done
soft key to save your writing.
9. To correct any handwriting recognition errors, touch the
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad or the QWERTY keypad (indicated by
keys).
down arrow (at the upper right corner of the screen), then
or
on
select 3X4 Keypad or QWERTY
.
Changing the Text Entry Mode
Text messages can be made up of alphabetical characters,
numbers, and symbols. You can use the following text entry
modes to simplify text entry:
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also
use 123 mode to enter numbers and symbols into your message simply
by pressing the keys labeled with the symbols you want.
•
Symbols — Using the phone keypad, enter a symbol into your
•
Abc — Enter letters, numbers, and symbols by repeatedly pressing
each phone key until the desired character (as shown on the key)
appears in the display or by using the QWERTY keypad. ABC mode
letter options are:
message by pressing the key labeled with the desired symbol
(indicated by
or
on keys).
The current text entry mode (Abc, abc, ABC, T9Word,T9word,
T9WORD, 123, or Symbols) is indicated on the touch keys. To
change the text entry mode, do the following:
–
Abc — Enter initial capital letters (indicated by
on keys)
or
–
abc — Enter all lower case letters (indicated by
on
on
Changing 3x4 Keypad Text Entry Mode
1. While composing a text message or memo, touch the Entry
Mode soft key.
keys)
–
ABC — Enter all upper case letters (indicated by
or
keys)
The following options appear in the display:
Note: T9 Word does not support the QWERTY keypad or Handwriting
Recognition screens, which do not need this function.
•
•
•
Abc
abc
ABC
•
T9 Word — Press each phone key only once to enter the letter of the
word that you’re spelling. T9 WORD mode letter options are:
55
®
•
•
•
•
T9Word
T9word
T9WORD
123
Using T9 Mode (Phone Keypad Only)
T9 Word recognizes commonly used words for the numeric
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
2. Select the desired text entry mode.
3. To change to Symbols mode, touch the Symbols soft key.
ᮣ
While composing a text message, touch the Entry Mode
Changing QWERTY Keypad Text Entry Mode
soft key, then touch T9Word.
ᮣ
While composing a text message or memo, to change text
entry mode:
•
For practice, enter the word “Samsung” by pressing each of the
following keys only once:
•
•
•
To select abc mode, press
To toggle between abc and ABC modes, press
To select 123-Symbols mode, press or
To select additional Symbols mode, press
To select Shortcuts mode, press
.
–
.
S
A
M
S
U
N
G
.
–
.
T9 Word recognizes that the most commonly used word for the
numeric sequence you just entered is “Samsung.”
.
Changing Handwriting Recognition Screen Text Entry
Mode
ᮣ
While composing a text message or memo, to change text
entry mode:
•
•
To select Abc mode, press
.
To select 123 mode, press
.
Entering Text
56
–
–
Pause briefly and the displayed letter is accepted and inserted into your
message.
If more than one word shares the
same numeric sequence, T9 Word
provides the most commonly used
word, any additional words appear
in a scrollable pop-up list, in which
you can select a preferred word.
Press
to enter a space and press
to enter a period.
•
•
Using the QWERTY keypad, touch the key labeled with the desired
letter (such as, press for “G” and for “H”).
Using either Handwriting recognition screen, use a stylus to print
the desired letters.
Note: To enter a space, press
enter a period, press
. To
. These key
Entering Numbers
Enter numbers into a text message while in 123 mode.
functions apply to both T9 Word and
1. While composing a text message, do one of the following:
•
Using the phone keypad, touch the Entry Mode soft key, then touch
123
.
•
•
Using the QWERTY keypad, press
or
.
Using Abc Mode
1. While composing a text message, do one of the following:
Using either Handwriting recognition screen, press
.
2. Enter numbers while in 123 mode by using one of the
•
Using the phone keypad, touch the Entry Mode soft key, then touch
Abc
following:
.
•
•
Using the QWERTY keypad, press
.
•
Using the phone keypad or the QWERTY keypad, touch the keys
labeled with the desired numbers.
Using either Handwriting recognition screen, press
.
•
Using either Handwriting recognition screen, use a stylus to print
the desired numbers.
2. Enter letters while in Abc mode by using one of following:
Using the phone keypad:
Touch the key repeatedly until the desired letter appears in the display
•
–
(such as, press once for “G” and twice for “H”).
57
Entering Symbols
Enter symbols (such as “@” or “%”) into a text message while in
Symbols mode.
ᮣ
While composing a text message, enter symbols by using
one of following keypads:
•
Using the phone keypad:
–
Touch the Symbols soft key. The first of four symbol screens appears in
the display.
–
Use the Prev and Next soft keys to page through the other symbols, if
desired.
–
–
Touch the key labeled with the symbol that you wish to enter.
Repeat these steps to insert additional symbols into your message.
•
•
Using the QWERTY keypad:
–
–
Press
and/or
.
Touch the key(s) labeled with the corresponding symbol(s) that you wish
to insert into your message.
Using either Handwriting recognition screen, the only symbol you
can enter is a period.
Entering Text
58
Section 7: Messaging
This section explains how to create, send, receive, and view
different types of messages. This section also describes the
features and functionality associated with messaging.
2. Address your message by selecting contacts and/or
entering number(s) or e-mail address(es) of message
recipient(s):
Creating and Sending New Messages
This section guides you through procedures for creating and
sending text, picture, and postcards.
•
To select a mobile number or e-mail address using your Contacts
list, touch the Contacts button. The Contacts screen appears in
Creating and Sending a Text Message
1. In standby mode, touch the
Touch a Contact entry. A check mark appears in the entry’s check box.
To add the selected Contact to the To list, touch the Add soft key. The
Text Msg screen appears in the display showing the populated To list.
Messages soft key, then touch
Send Message
➔
Text
•
To enter recipient phone number(s) or e-mail address(es), touch an
empty To field. The QWERTY touch keypad screen appears in the
display in 123 mode.
Message. The Text Msg
screen appears in the display
showing the To list.
–
To enter a phone number, touch the appropriate keys in the proper
sequence, then touch the Done soft key. You are returned to the To list.
–
To enter an e-mail address, change the text entry mode from 123 to
soft key. You are returned to the To list.
Tip: You can also access Messages by
touching the Menu soft key and
selecting Messages
.
•
To select members of a Contacts Group as recipients, touch the
Group button. The Groups screen appears in the display.
–
Select the desired Group. The Contacts screen appears in the display.
59
–
–
Select individual Contacts or touch Select All. Check marks appear in
the check boxes for the selected Contacts.
Touch the Add soft key. You are returned to the To list.
•
To use pre-composed text, touch the Add Quick Text soft key, then
select the desired Quick Text to add to your message.
•
To select a phone number from a Recent Call as a recipient, touch
the Recent Calls button. The Calls screen appears in the display.
5. When you’re finished composing your message text, touch
the Done soft key. A preview of your message appears in
the display.
–
–
–
If desired, touch the down arrow button in the upper right corner of the
screen, then touch All Incoming Outgoing, or Missed calls.
,
,
Select individual calls or touch Select All. Check marks appear in the
check boxes for the selected calls.
6. If you have finished your text message, you can send it by
Touch the Add soft key. You are returned to the To list.
touching the Send soft key.
3. When you are finished
addressing your message,
touch the Next soft key. The
3X4 Keypad screen appears in
the display in mixed-case
mode.
•
Before sending your text message, you can change or add
recipients to your message by touching the Edit Send To soft key.
•
Before sending your text message, you can access more options by
touching the More soft key:
–
Touch Edit Text Format to edit text size and style, align text and
change text color or background color.
–
–
Touch Save As Draft to save your message as a draft.
Note: You can use any of the phones four
text entry screens to enter your
message text. (For more information,
Touch Sending Options to set message sending options for priority
level, validity period and enhanced delivery acknowledgement. (For
page 65.)
Creating and Sending a Picture Message
1. In standby mode, touch the Messages soft key, then touch
Send Message
➔
Picture Message. The Picture Msg
Messaging
60
screen appears in the display showing the To list.
4. If desired, touch the Subject
field. The 3X4 Keypad screen
appears in mixed-case mode.
Tip: You can also access Messages by touching the Menu soft key and
selecting Messages
.
Note: You can use any of the phone’s four
text entry screens to enter your
2. Address your message as you
would a Text message (see
3. When you are finished
addressing your message,
touch the Next soft key. The
Picture Msg fields screen
appears in the display.
•
To use pre-composed text, touch
the Add Quick Text soft key,
then select the desired Quick Text to add to your message.
6. If desired, repeat steps 4 and 5 for the Text field.
7. To add a picture to the message, touch the Picture field.
You are prompted to Take a Photo or to add a photo from
the My Images folder.
•
To activate the phone’s camera and take a new picture, touch Take
(
).
61
•
To access your photo gallery, touch My Images. With pictures in
the gallery, a list of thumbnail images appears in the display. Select
the desired photo and touch the Send soft key.
page 65.)
•
•
To save your Picture message as a draft, touch Save As Draft.
You are returned to the
To preview your Picture message as the recipient(s) will see it,
touch the Preview soft key.
Picture Msg screen which is
populated with the selected
photo in the Picture field.
•
To make changes to your message, touch the Back soft key.
Send Picture Messages in Camera Mode
Picture messages can be sent from your phone’s camera to
recipients with compatible phones or devices. You can even
accompany a picture with a voice memo or preloaded sound file.
8. If desired, you can add a
sound file to accompany the
picture by selecting the Sound
field.
Tip: You can send a Picture message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Picture
Msg screen.
•
To record a sound file to add to
this message, touch Record
1. In standby mode, press and hold the Camera key (
).
The camera viewfinder screen appears in the display.
•
To add an existing sound file, touch My Sounds, select a preferred
2. Using the display as a viewfinder, when the image that you
file for a list of available sound files, and touch the Send soft key.
wish to send appears in the display, touch the Camera key
You are returned to the Picture Msg screen which is
(
) to take a picture.
populated with the selected sound file in the Sound field.
Note: For more information about using the camera feature in your phone,
9. To send your finished message, touch the Send soft key.
•
Before sending your Picture message, you can set message send
options by touching the More soft key and touch Sending Options
.
Messaging
62
3. Touch the Send soft key (
). If necessary, your phone
resizes your picture for sending, then the Picture Msg
screen appears in the display showing the To list.
Creating and Sending a Video Message
1.In standby mode, touch the Messages soft key, then touch
Send Message
➔
Video Message. The Video Msg screen
5. When you are finished
addressing your message,
touch the Next soft key. The
Picture Msg fields screen
appears in the display with
your new picture populating
the Picture field.
appears in the display showing the To list.
Tip: You can also access Messages by touching the Menu soft key and
selecting Messages
.
2. Address your message as you
would a Text message (see
6. To complete and send your
message, refer to steps 4 –
11 of “Creating and Sending
3. If desired, touch the Subject
field. The 3X4 Keypad screen
appears in mixed-case mode.
Note: You can use any of the phone’s four
text entry screens to enter your
Send Postcard Messages in Camera Mode
You can also create Postcard messages using photos taken with
the your phone’s camera.
63
9. Before sending your Video message, you can set message
send options by touching the More soft key and touch
•
To use pre-composed text, touch the Add Quick Text soft key, then
select the desired Quick Text to add to your message.
5. If desired, repeat steps 3 and 4 for the Text field.
10. To send your finished message, touch the Send soft key.
6. To add a video clip to the message, touch the Video field.
You are prompted to Take a Video or to add a video clip
from the My Videos folder.
Send Video Messages in Camcorder Mode
Video messages can be sent from your phone’s camcorder to
recipients with compatible phones or devices.
•
To activate the phone’s camcorder and record a new video clip,
touch the Send soft key.
Tip: You can send a Video message to up to ten recipients. Enter each
recipient’s address or phone number in a separate To field of the Video
Msg screen.
•
To access your video gallery, touch My Videos. With video clips in
the gallery, a list of thumbnail images appears in the display. Select
the desired video clip and touch the Send soft key.
1. In standby mode, press and hold the Camera key (
).
The camera viewfinder screen appears in the display.
You are returned to the Video Msg screen which is
2. Touch the Mode soft key. The camcorder viewfinder screen
populated with the selected video clip in the Video field.
appears in the display.
7. Touch the Send button to save the video and return to the
3. Touch the Recording Mode soft key. Select the Video Msg
Video Msg screen.
option.
8. To preview your Video message as the recipient(s) will see
Note: For more information about setting camcorder options in your phone,
it, touch the Preview soft key.
•
To make changes to your message, touch the Back soft key.
Messaging
64
4. Using the display as a viewfinder, when the image that you
Message Sending Options
wish to send appears in the display, touch the Camera key
You can set priority, validity, and
other options before you send a
message. Which options appear in
the Sending Options list depends on
what type of message you have
composed and what message field
you have highlighted.
(
) to record a video. The time counter at the bottom
of the Camcorder viewfinder screen indicates recording
time in seconds.
5. To end your video clip, touch Stop
(
).
Note: For more information about using the camcorder feature in your
1. After you’ve composed a Text,
Picture, or Video message,
touch the More soft key and
touch Sending Options. The
following options appear in
the display:
6. Touch the Send soft key. If necessary, the phone resizes
your picture for sending, then the Picture Msg screen
appears in the display showing the To list.
• Priority Level — Lets you assign a High Normal, or Low (pic/
,
video messages only) priority to the message.
8. When you are finished addressing your message, touch
the Next soft key. The Video Msg fields screen appears in
the display with your new picture populating the Video
field.
• Validity Period — Lets you select a Date and Time when this
message will no longer be available to the recipient. When your
selected date and time pass, your message is recalled.
• Enhanced Delivery Ack — Set to On to be alerted when your
message is received by the addressee.
9. To complete and send your message, refer to steps 3 – 9
2. Select any desired options and values for those options.
65
3. To save your settings, touch the OK soft key. You’re
Receive Messages in Chat View
returned to the message creation screen.
When you exchange a series of text
messages with a single Contact or
number, you can view your
incoming messages and your sent
messages as if they were a “chat
session”.
Receiving New Messages
When you receive a message in
standby mode, one of the following
occurs:
•
If Auto View is set to On — An alert
sounds (unless turned off) and the
message text automatically appears in
the display and scrolls slowly to the
end of the message. (For more
Note: To use Chat View, you must set the
Message Settings
➔
Text Msg View
➔
1. View your incoming text
message(s) in Auto View
•
If Auto View is set to Off — An alert
sounds (unless turned off) and a New
Message notification appears in the display along with the closed
envelope icon ( ). The date and time of the message and the
following options also appear in the display:
the display.
•
•
indicates an incoming text message.
indicates an outgoing text message.
–
View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
2. You have the following available options:
–
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
•
To reply to the latest incoming text message, touch the Reply soft
key, and touch Text Message
.
ᮣ
Touch and drag the slider to the desired option.
Messaging
66
•
A
New Message notification appears in the display along with the
closed envelope icon ( ). The date and time of the message and
the following options also appear in the display:
View Now — Opens the message where you have the option to Reply,
Forward, Erase, Add To Contacts, Lock/Unlock, Save Quick Text, Save
Media, or Message Info.
Note: Only text messages appear in the Chat With screen.
•
•
•
To view details about the last message in the Chat With screen,
–
touch the View Last Msg. soft key.
To erase selected or All messages listed in the Chat With screen,
touch the Erase soft key.
–
View Later — Closes the popup and saves the message to your inbox
where you can view it later.
To access additional options, touch the More soft key:
–
–
–
–
–
Forward — Forward a copy of a selected text message listed in the
Chat With screen.
ᮣ
Touch and drag the slider to the desired option.
Add to Contacts — Adds the originator of an incoming text message
to your Contacts list.
Message Folders
Inbox
Lock/Unlock — Blocks/permits deletion of selected or All text
messages listed in the Chat With screen.
Received messages of all types (except Voicemail) are stored in
the Inbox.
Save Quick Text — Save the message text as a Quick Text entry for
later reuse.
1. In standby mode, touch the Messages soft key, then touch
Message Info — Shows the originator, date and time, priority,
Inbox, to open the Inbox folder.
message type, and message size.
2. To delete one or more messages, touch the Erase soft key,
select the message(s) to be deleted, then touch the Erase
soft key again.
Receive Messages While in a Call
When you receive a message while in a call, one of the following
occurs:
•
If Auto View is set to On — The message text automatically appears
in the display and scrolls slowly to the end of the message. (For more
3. To view a message, select it, then do one of the following:
•
To compose and send a message to the sender of the message,
touch the Reply soft key, then select the type of message you wish
to compose: Text, Picture, or Video.
67
•
•
•
To forward the message to other recipients, touch the Forward soft
Tip: Verify whether and when a message or e-mail was successfully
key.
To delete the message, touch the Erase soft key, then touch the
Yes button.
To access other options, touch the More soft key. The following
options appear in the display:
1. In standby mode, touch the Messages soft key, then touch
Outbox. A list of your outgoing messages appears in the
display.
–
Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
–
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
2. To delete one or more messages, touch the Erase soft key,
select the message(s) to be deleted, then touch the Erase
soft key again.
Save Quick Text — Saves the message text as a Quick Text entry.
Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
3. To view a message, touch it, then do one of the following
Messages and Lock Mode
•
•
•
•
To re-send the message to the original recipient(s), touch the
Resend soft key.
Your phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code. (For
To forward the message to other recipients, touch the Forward soft
key.
To delete the message, touch the Erase soft key, then touch the
Yes button.
Outbox
To access other options, touch the More soft key. The following
options appear in the display:
Your phone stores outgoing messages in the Outbox, regardless
of whether the message was successfully sent to, or received by,
the addressee.
–
Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
Save Quick Text — Saves the message text as a Quick Text entry.
Messaging
68
–
Message Info — Lets you display status information about a
message.
–
–
–
Lock Unlock — Blocks or allows erasure of the message.
/
Save Quick Text — Saves the message text as a Quick Text entry.
Select an option to perform the function for that option.
Drafts Folder
Message Info — Lets you display status information about a
message.
Select an option to perform the function for that option.
Messages in the Drafts folder are those that have been
composed but never sent. You can return to the Drafts folder at
any time to view, edit, or send a draft message.
Voicemail
Voicemail allows callers to leave voice messages in your voice
mailbox, and lets you review, play, and delete your voice
messages any time you are in your Carrier’s network coverage
area.
1. In standby mode, touch the Message soft key, then touch
Drafts. A list of your draft messages appears in the display.
2. To delete one or more messages, touch the Erase soft key,
touch the message(s) to be deleted, then touch the Erase
soft key again.
Voice Mail Setup
Before callers can leave voice mail messages, you must first set
3. To view a message, select it, then do one of the following
•
•
•
•
To send a message to the original recipient(s), touch the Send soft
key.
To change the message and/or the recipients, touch the Edit soft
key.
To delete one or more messages, touch the Erase soft key, select
the message(s) to be deleted, then touch the Erase soft key again.
To access other options, touch the More soft key. The following
options appear in the display:
–
Add To Contacts — Lets you add the sender’s number or E-mail
address to your Contacts list.
69
Checking your Voicemail
Note: This function erases all messages in a selected message folder or in
all message folders. To delete a single message, from the Messaging
menu, select the message folder where the message to be deleted is
stored, then touch the Erase soft key, select the message in the list,
and touch the Erase soft key again.
New voice messages in your voice mailbox are logged in the
Voicemail folder of the Messages menu. Open the Voicemail
folder to view the Callback # (if available), Urgency, and other
details of new voicemail messages.
1. In standby mode, touch the Messages soft key, then touch
Erase Messages. The following options appear in the
display:
1. In standby mode, touch the Dialer soft key, then touch and
hold
until you’re connected to your Wireless Carrier’s
voicemail system. A recorded message prompts you for a
password.
• Inbox — Lets you delete all messages from your Inbox.
• Outbox — Lets you delete all messages from your Outbox.
• Drafts — Lets you delete all draft messages from the Drafts folder.
2. Enter your password, then follow the recorded prompts, to
listen to your voice message(s), change administrative
options, and so on.
• All Messages — Lets you delete all messages from all message
folders.
2. Select the folder(s) containing the messages that you wish
to delete. You are prompted to confirm the erasure of all
messages in the folder(s).
Tip: You can also access your voice mail by selecting an entry in the
Voicemail folder.
Erasing Messages
You can erase all of the messages in each/all of your message
folders from one convenient location.
3. To cancel deleting any messages, touch the No soft key. To
delete all messages from the selected folder, touch the Yes
soft key.
Messaging
70
• Signature — Lets you disable (Off), enable (On), and update the
Message Settings
The Message Settings let you customize your phone’s messaging
to suit your preferences.
text signature that can be inserted in outgoing messages.
• Reminder — Lets you set the message receipt reminder to play
Once Every 2 Minutes, Every 15 Minutes, or not to play (Off).
,
1. In standby mode, touch the Messages soft key, then touch
Message Settings. The Message Settings screen appears in
the display listing the following options:
• Text Msg View — Lets you set your phone’s messaging to do the
following:
–
Auto View — Set your phone to Display your incoming text messages
automatically when they’re received or to prompt you whether to view
them now or later.
• Auto Save/Auto Erase — Lets you set your phone’s messaging to:
–
Automatically save unsent messages to the Outbox folder, to discard
them, or to prompt you to elect to save/discard unsent messages.
–
View Mode — Set your phone messaging to display incoming text
messages one at a time (Normal view) or to display text messages
(outgoing and incoming) in a Chat-style view.
–
Automatically erase/or prompt you to delete the oldest read messages
after message memory is full and new messages are received.
• Picture/Video Msg Download — When set to On, your phone
automatically downloads Picture and Video messages to your Inbox
folder when they are received. When set to Off, you are prompted
to select whether to download the message now or later.
• Quick Text — Lets you change pre-composed text or compose
text for addition to your outgoing messages.
• Voicemail Number — Lets you update your Voicemail access
number.
2. Select any desired options and settings for those options.
• Keypad/Entry Mode — Lets you set the following:
3. To save your settings, touch the OK soft key. You are
–
Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting
returned to the Message Settings menu.
full screen) for entering message text.
–
Default text Entry Mode [Abc/abc/ABC (alphabetically), T9 Word, or
123 (numerical)] for composing message text.
• Callback Number — Lets you disable (Off), enable (On), and
update the callback number that can be inserted in outgoing
messages.
71
RemoMail
You can use your phone to access your personal or business
e-mail account(s).
1. In standby mode, touch Menu
➔
RemoMail.
2. Touch the Yes soft key. The catalog appears in the display.
3. Select and download the RemoMail application.
4. Follow the prompts that appear in the display to setup your
phone to access an e-mail account.
Messaging
72
Section 8: Downloads (Brew)
With Mobile Shop, you can download full featured applications
over the air including games, personalized ring tones, pictures,
and more. You can send and receive instant messages and email,
or browse the web to catch up on all the latest news.
1. At the Downloads menu, touch MobileShop.
Your phone takes a moment to connect, then the End User
License Agreement appears in the display.
This section outlines how to obtain games and other applications
for your phone. For more information, contact your Wireless
Carrier.
2. Follow the instructions in your phone’s display. Then touch
the OK soft key.
Note: Please check with your Wireless Carrier for availability of applications.
Launching Downloads
1. In standby mode, touch MENU
➔
Downloads.
Changing Your Downloads Settings
Use the Settings menu in Downloads to manage, move, order
The Downloads menu appears in the display.
applications, and much more.
Applications Shopping and Downloading (Brew)
1. At the Downloads menu, touch Settings to view the
following options in the display:
Download games, ring tones, e-mail, and more using Mobile
Shop.
• Order Apps — Download applications over the network.
Note: For information on airtime charges, contact your Wireless Carrier.
• Move Apps — Move previously downloaded applications between
available folders.
• Manage Apps — View used and available memory.
• Main Menu View — Select whether to view the main Mobile Shop
menu in a list or icon format.
73
• View Log — View the Mobile Shop log, which displays information
about recent activity using Mobile Shop.
Charges
Charges will apply for network connections. A network
connection is used when you are browsing the MobileShop,
downloading and restoring apps, or cancelling subscription apps.
Charges will also apply when you use apps that require network
connections, such as downloading information and sending text
messages.
2. Touch the desired option to enter the option’s sub-menu
and view or change settings.
Using On-line Help
The Help sub-menu within Downloads is a short tutorial on
several Brew-Mobile Shop features. View information about
charges, cancelling subscriptions, buying apps, disabling apps,
and more.
Cancelling Subscription
To cancel a subscription to an app, choose Settings ➔ Manage
Apps. Then, select the app subscription you want to cancel.
1. At the Downloads menu, touch Help. The Help subjects
described in the following subsections appear in the
display.
Demo Apps
A Demo app is free and is designed to demonstrate the app’s
main features. It usually expires after a certain period of time or a
number of uses and often has limited functions. When you run a
demo app, you will be presented with a purchase option so you
won’t have to look for the app in the MobileShop catalog.
2. Touch the desired Help subject to view the Help
information.
Buying New Apps
Removing Apps
To buy new and exciting apps, visit the MobileShop catalog. It
provides you with a variety of apps you can choose from.
You may remove apps that are no longer needed. When you
remove an app, you cannot use the application unless you
What do I pay?
purchase it again. To remove an app, choose Settings
➔
Manage
Apps. Then, select the app you want to remove.
When you buy an app, you will be charged for the purchase cost
of the app and the network connections to download it.
Downloads (Brew)
74
Disabled Apps
You can install new apps even if the memory of your phone is full
by partially removing (disabling) apps you haven’t used recently.
When you need to use a disabled app, you can restore it at no
additional purchase cost.
Restoring Apps
Disabled apps can be quickly restored at no additional purchase
cost. To restore an app, run the application you want to restore
from the Main Menu. You will be guided through the restoration
process.
Expired Apps
Apps that were purchased based on the number of uses or time
expire. You can purchase additional uses from the MobileShop
catalog.
75
Section 9: WEB
This section outlines how to launch the Browser, how to navigate
to other pages on the web, and how the keys on the keypad are
used with the web application. Additionally, links to other sites
are briefly discussed.
A list of categories (each representing one or more web
sites) appears in the display.
2. Use the Navigation keys to browse the categories.
Browser Indicator
3. Once the desired category is highlighted, touch to enter
the category list.
With the Browser, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch the Browser, your phone connects to the Internet and
the service indicator icon (not currently available) appears in the
display.
Exit the Web
ᮣ
To exit the Browser, touch
.
Using Browser
Stored Web Content
When you use the Browser, some of the keys operate differently
than during a normal phone call. The Browser presents onscreen
items in any of the following ways:
The Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
•
•
•
•
Text or numeric input.
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
You can act upon options or links by using the soft keys.
Launching the Browser
1. In standby mode, touch MENU
➔
Web.
WEB
76
Browser soft keys
remains stored in the phone (if you leave your phone turned on).
You can access this information without reconnecting to the
Internet. However, if you are viewing stored information, and you
select a link to a site that was not accessed in your last session,
you automatically re-connect to the Internet.
At the bottom of the Browser screen is a bar that contains
browser commands. The Left and Right soft keys are used to
execute the browser commands that appear in their respective
corners of the display. These are called “soft keys” because their
function changes depending on the application.
Launching Browser
1. In standby mode, touch Menu
➔
Web.
Using Links
The web screen appears in the display in landscape mode.
A list of categories (each representing one or more web
sites) appears in the display.
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
underlined. You can touch a highlighted link to select it.
This section outlines how to launch the web application, how to
navigate to other pages on the web, and how the keys on the
keypad are used with the web application. Additionally, links to
other sites are briefly discussed.
2. Select the desired category, to enter the category list.
Exit Browser
ᮣ
To exit the web, touch
.
Web Features
With the web application, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch the web, your phone connects to the Internet and the
service indicator icon with a red arrow (
display.
Using the Web Application
This application presents on-screen items in any of the following
ways:
•
Text or numeric input.
) appears in the
Note: When entering text in a web page field, the browser limits you to using
the QWERTY touch keypad.
Stored Web Content
This web application ends an Internet connection after a certain
period of inactivity, however some information from your session
•
•
Links (embedded in content).
Numbered options (some may not be numbered).
77
•
Simple text.
Favorites — Displays and lets youselect from a list
You can act upon options or links by selecting them.
of web sites you have saved as your favorites.
Using Links
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally select a link.
Add to Favorites — Lets you save the address and
title of the current web page to your favorites list.
Slide — Lets you touch and slide the current web
page to view undisplayed portions of the page.
How the Buttons Work
Thetopandrightsideofthescreencontaincontrolbars.Thefollowing
table lists buttons that appear in the control bars and their functions
Settings — Launches the Settings menu, letting
you customize the web application to suit your
needs.
and the
key.
Touch to exit the application and return the phone
to standby mode.
Back — Displays the previously viewed web page,
if any.
Forward — Displays the previously viewed web
page, if any.
Refresh — Reloads and displays the current web
page.
Home — Loads and displays the web page
designated as your “home page”.
Zoom — Lets you enlarge or shrink web pages.
WEB
78
Section 10: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
Camera
Using the camera module in your phone, you can take photos of
people or events while on the move. Additionally, you can send a
link to your My Album online to other people, set the picture as a
Wallpaper, or as a Picture ID image.
Accessing Multimedia
1. In standby mode, touch the Menu soft key, then touch
Multimedia. The following Multimedia sub-menus appear
in the display:
Camcorder
Using the camcorder module in your phone, you can shoot videos
of people or events.
• Camcorder — Lets you launch and set up your phone’s
• My Images — Lets you choose the multi-media or pictures that
appear in your phone’s display.
My Images
• My Videos — Lets you choose the videos that appear in your
phone’s display.
The My Images folder stores pictures you have taken with your
phone’s camera and images you have downloaded. My Images
lets you choose a picture or image to do the following:
• My Ringtones — Lets you assign melody tones for calls, alarms,
and other alerts.
•
•
•
Appear in your phone’s display while in standby mode (wallpaper).
Serve as picture ID for one of your contacts.
• My Sounds — Lets you assign melody tones for calls, alarms, and
other alerts.
Be sent to another phone as part of a Picture message or over a
Bluetooth connection.
2. Touch a sub-menu to launch it. The following sections
describe the above listed sub-menus in greater detail.
79
•
Serve as the background for a Postcard message.
Tip: You can also access My Images from:
1. From the Multimedia menu, touch My Images
.
-The Camera screen, by touching the Gallery button.
If there are no pictures stored in your phone or on a
2. Touch a picture to enlarge it for easier viewing.
memory card, “Empty” appears in the My Images screen.
•
To launch the camera to take a picture, touch the More soft key and
3. While viewing a picture, select one of the following
options:
• Zoom button — Lets you magnify the current image.
If there are pictures stored in your phone or on an optional
Memory Card, up to seven thumbnail images of your
pictures appear in the display.
• CANVAS button — Lets you use the current image to create a
• Full screen button — Expands the current image to fill the display.
• Send soft key — Lets you send the selected image to a specified
recipient in a Picture message, or via Bluetooth.
• Set As soft key — Lets you assign the selected picture as the
Picture ID for a Contact or as the Wallpaper for the idle screen.
• More soft key — Lets you access the following additional options:
–
Camera — Launches your phone’s camera, so you can take new
pictures.
–
–
Erase — Deletes one or more selected, unlocked pictures.
Move to card/phone — Lets you move the video from the phone
to a memory card or from a memory card to the phone.
–
Copy to card/phone
—
Lets you save a copy of the picture to the
phone or to a memory card.
Multimedia
80
–
–
–
Rename — Lets you rename the picture.
Lock Unlock — Lets you protect the picture from being deleted.
2. To take a new video, touch the More soft key and touch
Camcorder. The camcorder view finder screen appears in
/
Print — Sends a printout of the picture to a Bluetooth-compatible
printer.
–
–
Slide Show — Shows the available images as a sequence of full-
screen pictures.
3. To play a video, touch it. The
Video Player screen appears
in the display and begins
playing the highlighted video.
Image Info — Displays information about the picture, such as the
picture Name, creation Date and Time
Size
My Videos
My Videos lets you take videos, review your videos, send them as
video messages, and assign your videos as wallpaper on your
phone.
,
Resolution, and the data
.
1. From the Multimedia menu, touch My Videos
.
4. To send a video as part of a
video message, touch the
If there are no videos stored in your phone or on a memory
card, “No Video” appears in the Videos screen.
If there are videos stored in your phone or on an optional
Memory Card, up to seven thumbnail images from your
videos appear in the Videos screen.
5. To delete one or more video clips from the My Videos
folder, touch the Erase soft key.
6. For more My Videos options, touch the More soft key.
Select one of the following options:
81
• Camcorder — Lets you record a new video clip.
•
•
To stop ringtone playback, touch the ringtone a second time.
• Move to card/phone — Lets you move the video from the phone
to a memory card or from a memory card to the phone.
To assign the highlighted ringtone to the Alarm or Contact, touch
the Set button.
• Copy to card/phone — Lets you save a copy of the picture to the
3. When accessing My Ringtones from the Multimedia menu,
assign the highlighted ringtone by touching the Set as
button. The following options appear in the display:
phone or to a memory card.
• Rename — Lets you rename the selected video clip.
• Lock / Unlock — Lets you protect a video from being deleted.
• Ringtone — Lets you assign the selected ringtone to incoming
voice calls.
• Video Info
—
Displays information about the video, such as the picture
Name Date
,
,
Time Resolution, the data Size, and Duration
,
.
• Contact ID — Lets you assign the selected ringtone as the
distinctive ringer for a Contact.
My Ringtones
My Ringtones lets you assign ringtones (preloaded and
downloaded) for calls, alerts, and as distinctive ringers for
Contacts.
• Alert Tone — Lets you assign the selected ringtone to All
Messages
,
TXT Message, Picture-Video Message, or Voicemail
Message
.
4. Select the desired option.
1. From the Multimedia menu, touch My Ringtones. A list of
5. When using a downloaded ringtone, touch the Options soft
ringtones appears in the display.
key and the following options appear in the display:
Tip: You can also access My Ringtones from:
• Send Via BT — Sends a copy of the ringtone file to another device
over a Bluetooth connection.
-A Alarm screen by touching the Alarm Tone option.
• Erase — Erases one or more selected files or All files.
-The Edit Contact screen by touching the
option.
For additional Options, touch the More soft key:
2. When accessing My Ringtones from an Alarm or a Contact,
select a particular ringtone. A dot appears in the selected
ringtone’s radio button, and the ringtone begins playing.
• Move — Moves this file to Phone or Card memory.
• Copy — Copies this file to Phone or Card memory.
• Lock / Unlock — Lets you prevent/permit file deletion.
Multimedia
82
• Ringtone Info — Displays information about the selected file, such
• Erase — Erases the selected sound file.
as the file name, the file type, and the data size.
• Lock / Unlock — Lets you protect the sound file from being
deleted.
6. Select the desired option.
2. Touch the Envelope button to the right of the sound to send
My Sounds
My Sounds lets you record voice memos and lets you assign
preloaded and downloaded sound files as ringers for calls,
alarms, and other alerts.
the sound file in a picture message.
3. To play a sound file, touch it. The Sound Player screen
appears in the display. Select one of the following options
while the sound file plays:
1. From the Multimedia menu, touch My Sounds Record New
.
and choose one of the following:
• Record new — Launches the Voice Recorder, allowing you to
record a sound Until Memory Full or as Limit for Message.
• Until Memory Full— Recording continues until you touch
or until all available memory is used.
,
• Send — Lets you send this sound in a picture message.
• Limit for Message— Recording continues for no more than 1
minute.
• Set as — Lets you save this sound as a Ringtone, Contact ID, or
Alert Tone.
• Sound Info — Displays information about this sound such as, the
Title, File Size, and File Type.
Tip: You can also access My Sounds from:
-A Set Alarm screen by touching the Alarm Tone option, then touching
the My Sounds soft key.
-The Edit Contact screen by touching the
My Sounds soft key.
option and touching the
The following soft keys are available:
• Record New — Launches the Voice Recorder, allowing you to
83
Voice Memo
2. Touch the desired option. The Voice Recorder screen
appears in the display.
You can use your phone to record
voice memos and other sound files
for later playback or assignment as
ringers. (For more information, refer
3. Touch the Record button
(
), then start speaking.
As it is recording the phone
displays a countdown timer
that shows the seconds
Note: The maximum length for a voice
memo in “Limit for Message” mode
is 60 seconds. In “Until Memory Full”
mode, the time limit is determined by
available memory.
remaining for the recording.
•
To pause the memo, touch the
Pause button. When a memo is
paused, touch Resume to
continue recording.
You can save as many voice memos
as will fit in the empty memory
capacity.
4. Once you’re finished
recording, touch the Stop
Record a Voice Memo
button. The new recording is saved, and the My Sounds
screen appears in the display.
1. From the Multimedia menu, touch My Sounds then touch
the Record New soft key. The following options appear in
the display:
Review Voice Memos
• Until Memory Full — Recording continues until you touch
,
If you’ve saved any voice memos, you can review them anytime.
1. From the Multimedia menu, touch My Sounds. A list of
sound files appears in the display.
or until all available memory is used.
• Limit for Message — Recording continues for no more than 1
minute.
Multimedia
84
2. Touch the voice memo you
wish to review to play it. The
Sound Player screen appears
in the display.
•
To stop the memo playing, touch
. Touch to restart
playing the memo.
When the voice memo
finishes playing, the selected
voice memo remains
highlighted in the list of sound
files.
Erase One or More Voice Memos
1. From the Multimedia menu, touch My Sounds. A list of
sound files appears in the display.
2. Touch the Erase soft key. The Select to Erase screen
appears in the display.
3. Touch the Voice Memo(s) you want to erase. A check mark
appears in each selected Voice Memo’s check box.
4. Touch the Erase soft key. The selected Voice Memo
disappears from the list.
85
Section 11: Tools
This section explains how to use your phone’s digital assistant
functions to view today’s calendar, schedule events, set
reminders, perform calculations, and more.
2. Select the desired sub-menu.
Voice Commands
To access the Voice Commands menu:
Accessing Your Phone’s Tools
To launch the Tools menu:
1. In standby mode, touch and hold the Voice Recognition key
(
), on the right side of the phone.
ᮣ
In standby mode, touch the Menu soft key, then touch Tools
). The Tools menu appears in the display.
– Or –
(
From the Tools menu, touch Voice Service
➔
Voice
Voice Service
Commands
.
Your phone includes state-of-the-art voice recognition software
that lets you use your voice to dial numbers, access your
Contacts list, and open Tools. To access your phone’s voice
recognition, do the following:
Tip: You can also set your phone to start VoiceSignal when you connect an
1. At the Tools menu, touch Voice Service. The following
“Say a Command” appears in the display and is
options appear in the display:
pronounced through the earpiece, followed by a list of
available commands:
• Voice Commands — Lets you place calls, access your Contacts
List, review your appointments, and more by speaking commands
• Call — Lets you dial the phone by saying any name stored in your
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all your contacts, even if
you have hundreds of them stored on your phone. You can also dial
any telephone number, even if it is not stored in your contact list, by
• Voice Settings — Lets you tailor VoiceSignal to better respond to
your voice and your phone use preferences. (For more information,
Tools
86
saying the digits in the number. (For more information, refer to
2. Speaking clearly, say the command that you want to use.
If VoiceSignal does not recognize a command, it prompts
you to repeat the command.
• Send Text — Lets you access Create Text Message.
• Send Picture — Lets you access Create Picture Message.
If VoiceSignal still does not recognized the command, it
tells you “No match found” and offers you the option of
selecting Settings or Repeat before canceling voice
recognition.
• Lookup — Lets you find a Contact by name and review the
Contact’s information.
• Go to — Lets you access the following list of your phone’s features
and functions:
–
–
–
–
–
–
–
–
–
–
–
–
–
Messages
Downloads
WEB
Voice Command Tips:
Make sure you wait for the beep and/or “Listening...” pop-up before
speaking.
•
Contacts
Calls
•
Speak clearly at a normal volume, as if you were talking on the phone.
Voice Settings
Confirmation
Multimedia
Tools
Settings
You can select whether and when VoiceSignal asks for
confirmation of your responses when using the Call command.
Music Player
RealtoneVIP
RemoMail
Facebook
More Options
1. From the Tools menu, touch Voice Service
➔
Voice Settings
➔
Confirmation. The following options appear:
• Automatic— Voice Service asks for your confirmation only when it
is not sure if it has correctly recognized the name or number.
• Check — Lets you say a single command (such as “Status”) to
verify your phone's: Status Signal Strength Network Battery, or
My Phone Number
• Always Confirm — Voice Service always asks for your
confirmation.
,
,
,
.
87
• Never Confirm — Voice Service never asks for your confirmation.
•
•
If you make a mistake while recording a phrase, or if there is an
unexpected noise that spoils the recording, re-record that phrase.
2. Select your preferred setting.
Only use Adaptation if you are regularly having problems with Voice
Service. Once you adapt Voice Service, it will not work as well for other
people using your phone. (You can always reset Voice Service to its
original state, as described below.)
3. To save your selection, touch the OK soft key. To discard
the new setting, press
. You are returned to the
Voice Settings menu.
Adaptation
Adapt Voice
To adapt Voice Signal to your voice, do the following:
If you regularly have trouble with Voice Service not recognizing
the commands, names, and/or numbers you say, try adapting
Voice Service to your voice. Adapting can improve the accuracy
of Voice Service responses, especially for people with strong
regional accents.
1. From the Tools menu, touch Voice Service
Adaptation. The Adaptation screen appears in the
display showing the Adapt Voice option.
➔
Voice Settings
➔
2. Touch Adapt Voice. Your phone displays text describing the
Note: After you adapt Voice Service, it is customized to your voice, and your
voice only. Others will not be able to use your Voice Service on your
phone unless they reset it to factory defaults.
Adapt Digits process.
3. Touch the Start soft key. Your phone displays the first
phrase or digit sequence and says “Please say” through
the speaker followed by the phrase or digit sequence
appearing in the display.
Adaptation involves recording your responses to several
sequences of phrases. The recording process takes a couple of
minutes.
Tips for Adapting Voice Service:
4. Wait for the beep and say the phrase or digits using your
normal tone of voice. Adaptation continues the recording
process with the next phrase or set of digits.
•
•
•
•
Use Adaptation in a quiet place.
Do not use a headset during Adaptation.
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each phrase distinctly.
Tools
88
After 15 phrases and sets of digits, adaptation ends and
2. Select the preferred setting.
your are returned to the Adaptation screen.
3. Touch the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
Reset Voice
To reset Voice Service to factory default settings, do the
following:
Voice Launch
1. From the Tools menu, touch Voice Service
➔
Voice Settings
To set the key or action that launches Voice Service, do the
following:
➔
Adaptation Reset Voice. The phone prompts you to
➔
confirm voice adaptation reset.
1. From the Tools menu, touch Voice Service
Voice Launch. The following options appear in the
display:
➔
Voice Settings
➔
2. Touch the Yes soft key to reset your voice adaptation, or
touch the No soft key to keep your voice adaptation.
• Key Only — Touch and hold the Voice Recognition key (
) to
Modes
activate Voice Service.
Modes lets you specify whether Voice Service is to read prompts
and/or on-screen text to you when you are using your phone’s
menus.
• Key/EarMic — Attach a headset to your phone. Touch and hold
the Voice Recognition key (
to activate Voice Service.
) or press the button on the headset
1. From the Tools menu, touch Voice Service
➔
Voice Settings
2. Select the preferred setting.
➔
Modes. The following options appear in the display:
3. Touch the OK soft key to accept the new setting. Press
to discard the new setting and return to the Voice
Settings menu.
• Expert Mode — Voice Signal plays a beep when it requires
information from you.
• Prompt Mode — Voice Signal plays audio prompts for required
information.
• Readout Mode — Voice Signal reads on-screen text and plays
audio prompts for required information.
89
About
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
headset.
This option displays version and build information about the Voice
Service software included on your phone.
ᮣ
From the Tools menu, touch Voice Service
About
➔
Voice Settings
Turn Bluetooth On
➔
.
1. From the Tools menu, touch
Bluetooth. The Bluetooth
screen displays.
The About screen appears in the display showing the
version level of the Voice Service software currently
installed on your phone.
2. Touch the Turn On soft key.
Bluetooth
•
•
•
“Bluetooth Power On” pops-up
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
in the display.
The blue Bluetooth On icon
(
) appears on the status bar.
The SEARCH button becomes
highlighted in blue.
Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of
one another, you can exchange information between them, even
if they are located in different rooms.
Turn Bluetooth Off
1. From the Tools menu, touch Bluetooth. The Bluetooth
screen displays.
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
2. Touch the Turn Off soft key. “Bluetooth Power Off” pops-up
in the display, the SEARCH button highlighting disappears,
and the blue Bluetooth On icon ( ) disappears from the
status bar.
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
Tools
90
Add New Device
The Device Info screen appears in the display, showing the
selected device’s name, Type, Status, and Address.
Searching for Available Bluetooth
Devices
5. Return to the Bluetooth screen by touching the OK soft key.
1. From the Tools menu, touch
Bluetooth. The Bluetooth
screen displays.
6. Touch, hold, and slide the identified icon to overlap the
Search button. You are prompted to enter the passkey or
PIN for the selected device.
2. Place the Bluetooth device
you want to pair with your
phone in discoverable mode.
(See the device user manual
for more information.)
7. Enter the device passkey or PIN and touch the Done soft
key. (See the device user manual for more information.)
Pop-up messages appear and the SEARCH button and
selected device icon are highlighted in blue to inform you
that pairing with the device and connecting to it are
complete.
3. Touch the SEARCH button.
Note: If Bluetooth is off, it automatically turns on.
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
Your phone searches for available Bluetooth devices.
Named icons for available devices appear in the display.
Note: When more than 5 devices are detected, additional icons are placed on
additional Bluetooth screen pages.
4. Identify the device you want to pair with your phone by
selecting an icon.
91
Disconnecting from a Bluetooth Device
1. In the Bluetooth screen, touch the device icon. A device
options list pops-up.
Paired Icons
The Bluetooth screen shows the
icons for Bluetooth wireless
technology devices paired with your
handset.
2. Touch Disconnect. The device icon’s blue highlighting
disappears.
1. From the Tools menu, touch
Bluetooth. Icons for
Managing Your Paired Icons
1. In the Bluetooth screen, touch a device icon. A device
options list pops-up. The following options appear in the
display:
registered Bluetooth devices
appear in the display.
Connecting to a Bluetooth Device
•
•
•
Disconnect — Lets you disconnect from the selected device.
1. In the Bluetooth screen,
Browse Files — Lets you browse files on the device.
touch, hold, and slide the icon
Send Files — Lets you send copies of files on your phone to the
selected device.
for the preferred device to overlap the SEARCH button. The
SEARCH button and the device icon flash and are
highlighted in blue to indicate the connection is complete.
•
Rename — Lets you change or replace the device name, as
needed.
•
Remove — Deletes the device from the Bluetooth screen.
2. If you are unable to connect with the device a pop-up
appears in the display. Touch, hold, and slide the selected
icon to overlap the SEARCH button again.
• Service list — Lists the Bluetooth services supported by your
phone.
•
Device Info — Shows the device name, Type of device, Status,
and device Address.
2. Select the desired option.
Tools
92
Bluetooth Settings
Calendar
1. To access the phone’s Bluetooth settings, in the Bluetooth
screen, touch the Settings soft key. The Phone Settings
screen appears in the display showing the following
options:
Calendar lets you view the current,
past, or future month in calendar
format. While viewing the calendar,
the current date is highlighted, and
days with scheduled events are
surrounded by a box.
• My Phone’s Name — Shows your device’s name. You may
change this name. Just select the name and enter your text
changes.
Navigating the Calendar
1. From the Tools menu, touch
• Discovery Mode — Allows other Bluetooth devices to see your
device as accessible. Touch On for other devices to see your device,
or Off for no visibility.
Calendar
.
The calendar appears in the
display with the current date
highlighted. The month and year appear at the top of the
display.
• Address — Shows the Bluetooth Address of your phone. (This
address is not changeable.)
2. To save your changes, touch the Save soft key. Press
to discard your changes and return to the
Bluetooth screen.
2. Use the following controls to display a particular month
and to highlight a particular date in the Calendar screen:
• Left/Right buttons — Moves the date and screen back/ahead one
month per keypress.
• Goto soft key — Select a particular date.
93
Add a New Event
1. From the Tools menu, touch
• Alarm — Touch Off
Before 1 Day Before
particular number of minutes, hours, or days before the Start Date
and Start Time)
/
10 Mins Before
/
30 Mins Before
/
1 Hour
/
/
1 Week Before
/
Customize (select
Calendar
.
.
6. For additional New Event options, touch the Set Details soft
The calendar appears in the
display with the current date
highlighted. The month and
year appear at the top of the
display.
key.
• End Date — Populated with highlighted Calendar date. Select the
date this event ends.
• End Time — Populated with a time one half-hour later than the
Start Time. Select the time this event ends.
2. Highlight the desired date.
• Details — Enter text describing details of the event.
• Location — Name or describe the location of the event.
• Alarm Tone — Select a ringtone from My Ringtones, buy a
ringtone on-line, or select a sound file from My Sounds. When you
select a ringtone or sound, it plays.
3. Touch the New Event soft key. The New Event screen
• Repeat — Select Off
Every Year
/
Every Day
/
Every Week
/
Every Month
/
appears in the display.
.
7. Touch the Save soft key to save your additional details
settings.
8. To store this Event in your Calendar, touch the Save soft
5. Select each of the following New Event options:
key. An alarm will notify you before the start of this Event,
if Alarm is set to a value other than Off
• Start Date — Populated with highlighted Calendar date. Select the
date this event begins.
.
• Start Time — Populated with the current time (rounded to the
nearest half-hour). Select the time this event begins.
Tools
94
View/Change an Event
•
To return to the Daily View list, press
.
4. For other options, touch the More soft key. The following
1. From the Tools menu, touch Calendar
.
options appear in the display:
A calendar appears in the display with the current date
highlighted. The month and year appear at the top of the
display.
• Monthly View — Returns you to the Calendar screen.
• Erase — Remove this event from the Calendar.
5. Select an option to invoke its function.
2. Navigate to and select a
desired date. (For more
information, refer to
Memo Pad
Create notes and store them in
Memo Pad. Notes that you create in
Memo Pad can’t be prioritized or
assigned an alert. Return to Memo
Pad anytime to review and edit your
notes.
“Navigating the Calendar” on
page 93.) The calendar is
replaced by the Daily View for
the selected date, listing all
events scheduled for this
date.
Create a Memo
1. From the Tools menu, touch
Memo Pad. A list of any stored
Memos appears in the
display.
3. Select an Event to view. The
current settings for the
selected Event appear in the display in a scrollable list.
•
2. To add a Memo, touch the New Memo soft key. A blank
Memo screen appears in the display.
•
To remove the event from the calendar, touch the Erase soft key.
(You are prompted to confirm the erasure.)
95
5. To send a memo as a text message, select the memo, then
touch the Send text message soft key. The memo text
appears in the Text Msg screen as part of the message
text.
4. When you’re finished entering details for the Memo, touch
the Done soft key. The Memo is saved.
Alarm Clock
5. To discard this Memo, touch and hold
to erase the
Your phone has three alarm clocks that you can set to go off
once, or to recur daily at a specific time. Once set, an alarm clock
is easy to change or turn off completely.
memo text, then press
again to return to the Memo
Pad screen.
Review, Edit, Erase, and Send Memos
1. From the Tools menu, touch Memo Pad. A list of any stored
Memos appears in the display.
Note: The Alarm Clock doesn’t function when the phone is turned off. If the
time for an alarm that was set for Once has elapsed while the phone is
off, the alarm sounds at the specified time on the next day.
2. To review a Memo, select it. The text of the Memo appears
in the display in a scrollable screen.
3. To edit a Memo, select it and touch the Edit soft key. The
Memo text appears in a text entry screen. (For more
•
To save your changes and return to the Memo Pad screen, touch
the Done soft key.
•
To discard your changes and exit Memo Pad, press
are prompted to confirm your wish to exit Memo Pad.
. You
4. To erase a Memo, select it and touch the Erase soft key.
You are prompted to confirm the erasure.
Tools
96
Set an Alarm
• Snooze — Select On to enable snooze timer for this alarm, then
select values for the following options:
1. From the Tools menu, touch
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
–
–
Snooze Duration — Select 1min
10min
Snooze Repeat — Select Once
Times
,
2min
,
3min
,
5min
,
7min, or
.
,
Twice
,
3 Times
,
5 Times, Or 10
.
3. When you’re finished selection option values for the alarm,
touch the Save soft key. If the Alarm is set to On, the alarm
2. Touch the New Alarm soft key.
The following Alarm options
appear in the display:
icon (
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display and an alert
sounds when the specified time for the alarm arrives.
• Alarm Name — Populated with
the default name, Alarm. To
change, select this field and
ᮣ
To silence the alarm, touch and slide
shown) or Stop
to Snooze (if
.
• Alarm Time — Populated with the current time. To change the
time, select this field, select a new time, and touch the Set soft key.
Note: If the alarm is set to repeat on one or more days, the alarm icon
remains in the top of the display.
• Alarm Repeat — Select the day(s) of the week (Sun Sat) on
which this alarm is to sound. The alarm will sound every week on
the day(s) selected.
–
If the alarm was set as a once only alarm (no repeat day selected), the
alarm icon disappears from the top of the display.
• Alarm Tone — Populated with Alert 1. To change, select this field,
select the preferred ringtone in the My Ringtones screen, then
touch the Set soft key.
Turn Off an Alarm
1. From the Tools menu, touch Alarm Clock. The Alarm screen
appears in the display, listing any currently set alarms.
• Alarm Volume — Touch and slide to set to the preferred volume.
97
2. Touch the Off button on the Alarm you wish to turn off.
World Time
World Time lets you set up to four
clocks to the time of day or night in
any of the 24 different time zones
around the world.
Erasing an Alarm
1. From the Tools menu, touch
Alarm Clock. The Alarm
screen appears in the display,
listing any currently set
alarms.
Note: To use World Time, you need to
subscribe to your Wireless Provider’s
digital service.
2. Touch the Erase soft key. The
Select to erase screen
ᮣ
From the Tools menu, touch
World Time. A list of your
selected clocks appears in
the display. The following
icons appear in the list:
appears in the display.
3. Touch the check box for the
Alarm you want to remove
from the list. A check mark appears in the selected box.
Indicates the clock set to your home (local) time.
Indicates your 2nd clock.
4. Touch the Erase soft key. The selected Alarm is removed
from the list.
Tools
98
Setting a World Clock
5. Touch the Save soft key. Your choice is saved and you are
returned to the World Time screen.
The home clock is set to a default
time and city and is labeled with the
name of the city. To change this or
another World Clock setting, do the
following:
Adding a World Clock
1. From the Tools menu, touch World Time. The World Time
screen appears in the display listing your current World
Clocks.
1. From the Tools menu, touch
World Time. The World Time
screen appears in the display
listing your current World
Clocks.
2. Touch the Add soft key. The
Add City screen appears in
the display.
3. Touch and slide the map until
you see the city whose time
you wish to select as this
clock’s new time.
2. Select the clock you wish to
set to a new time zone. The Add City screen appears in the
display.
3. Touch and slide the map until you see the city whose time
4. Select the city. The displayed
time changes to the time for
the selected city.
you wish to select as this clock’s new time.
4. Select the city. The displayed time changes to the time for
the selected city.
5. Touch the Add soft key. Your
choice is saved and you are returned to the World Time
screen.
99
Selecting Your 2nd Clock
1. From the Tools menu, touch World Time. The World Time
screen appears in the display listing your current World
Clocks.
Your 2nd Clock and your Home Clock both appear in the Clock
widget when you move it from the Widget Bar to the standby
screen. By changing your 2nd Clock, you can quickly and easily
keep track of the time in a new city and at home. (For more
2. Touch the Erase soft key. The
Select to erase screen
appears in the display.
1. From the Tools menu, touch
World Time. The World Time
screen appears in the display
listing your current World
Clocks.
Note: Your Home and 2nd clocks are
disabled in the Select to erase screen
to prevent them being erased.
3. Touch the World Clock you
want to erase. A check mark
appears in the selected World
Clock’s checkbox.
2. Touch the Set as 2nd Clock
soft key.
3. Select the World Clock you
prefer as your 2nd Clock. The
2nd check mark moves to
your selection.
4. Touch the Erase soft key. You
are returned to the World Time screen in which the erased
World Clock no longer appears.
Calculator
4. Touch the OK soft key. Your selection is saved.
You can perform calculations, including addition, subtraction,
multiplication, division, and percentages using your phone.
Erasing a World Clock
World Time lets you erase all of your World Clocks except your
1. From the Tools menu, touch Calculator. The Calculator
Home clock (
) and 2nd clock (
).
Tools
100
screen appears in the display.
Stop Watch
You can use this function to set a
stop watch.
2. Enter the first number in your
calculation using the
1. From the Tools menu, touch
Stop Watch. The Stop Watch
screen appears in the display.
calculator-style touch
keypad. (Numbers can be up
to 15 digits long, and can
include a decimal point
followed by up to 5 more
digits.)
2. To start the Stop Watch count,
touch the Start soft key.
3. To record succeeding event/
lap times, touch the LAP soft
3. Select the desired operation.
[You can nest calculations
key at the start of each
succeeding event/lap to
using parentheses “( )”.] To
delete your last entry, touch
record the completion time for the previous event/lap. You
can record up to eight event/lap times.
.
4. Use the keypad to enter the second number for your
4. To stop the Stop Watch count, touch the Stop soft key.
calculation.
5. To resume the Stop Watch count, touch the Restart key.
5. Touch
to perform the calculation and view the result.
6. To erase all Stop Watch (lap) times recorded, touch the
Reset soft key.
101
2. Select the conversion feature you wish to use.
Converter
The conversion menu provides the
following conversion categories:
3. Touch the down arrow key and select the units to be
converted from.
•
•
•
•
•
•
Currency
Length
4. Enter the quantity you want converted in the field at the top
of the screen. The converted quantities appear opposite
their respective units of measure.
Weight
Volume
Area
Currency — Reviewing/Editing Exchange Rates
Temperature
The Currency Converter includes
long-term average exchange rates
as default values. To review and/or
change a default exchange rate to
the current exchange rate, do the
following:
Using Converters
To convert a currency, length,
weight, volume, area, or
temperature, do the following:
1. From the Tools menu, touch Converter. The following list of
1. From the Tools menu, touch
converters appears in the display:
Converter
➔
Currency.
• Currency
• Length
Tip: From any Converter screen, touch
.
• Weight
2. Touch the View Rates soft key.
A list of exchange rates
• Volume
• Area
appears in the display.
• Temperature
3. Select the exchange rate you wish to change.
Tools
102
4. Enter the changed exchange
Currency — Adding Exchange Rates
rate value.
You can use the Currency Converter
to convert from and to obscure
currencies by adding exchange
rates for these currencies. To add a
currency and its exchange rate to
the Currency Converter, do the
following:
5. Touch the Done soft key to
save the changed exchange
rate.
1. From the Tools menu, touch
Converter
➔
Currency.
Tip: From any Converter screen, touch
.
2. Touch the View Rates soft key.
A list of exchange rates
appears in the display.
3. Use the left and right arrow buttons at the top of the list to
display the base currency for the new exchange rate.
4. Touch the Add Rates soft key. A new line containing blank
exchange rate fields appears at the bottom of the
exchange rates list.
5. Select the currency identifier field.
103
6. Enter an identifier of up to 4 characters for the new
3. Touch the Erase Rates soft
key. The Select to Erase
screen appears in the display,
listing those rates you can
erase.
7. Highlight the exchange rate field.
8. Enter a decimal exchange rate for the new currency using
the keypad.
Note: The Erase Rates soft key only
appears if there are user-added
currency conversion rates in the
Rates list.
Note: The Exchange Rate field only accepts up to seven characters (including
the decimal point) with up to five digits before or after the decimal
point (for example: 1234567, 0.12345, 1.23456, 123.456, 12345.6).
4. Touch a user-added currency
exchange rate to be erased. A
check mark appears in the
9. To add the new exchange rate to the list, touch the Done
soft key.
checkbox for the selected rate.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
– Or –
Touch Select All. Checkmarks appear in the checkboxes for
all user-added rates.
1. From the Tools menu, touch Converter
➔
Currency.
5. Touch the Done soft key. You are returned to the Rates List.
Tip: From any Converter screen, touch
.
The erased rate no longer appears in the list.
2. Touch the View Rates soft key. A list of exchange rates
appears in the display.
Tools
104
Tip Calculator
Tip Calculator automatically
calculates the following amounts:
•
•
Gratuity (tip)
Individual payment (for groups)
Calculations are based on the total
amount of the check, a selected
gratuity percentage, and the
number of people paying.
1. From the Tools menu, touch
Tip Calculator. The Tip
Calculator screen appears in
the display.
2. Touch the Bill field and enter the total amount of the bill.
3. Touch the Tip field and enter a tip percentage.
4. Touch the # Paying field and enter the number of persons
paying using the keypad.
5. The amount of the Tip, the bill Total, and the amount Each
person should pay appear in the lower half of the screen.
105
Section 12: Changing Your Settings
This section explains how to customize your phone to suit your
needs and preferences.
Widget
This function lets you select which
optional widgets appear in the
Widget Bar.
Settings Menu
ᮣ
To access the Settings menu, select Menu
➔
Settings.
The Settings menu appears in the display.
Location
1. From the Settings menu,
select Widget. The following
options appear in the display:
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
• Clock — Displays current time.
• Date — Displays current date.
Note: Contact your Wireless Provider to determine whether, when, or where
• Images — Launches My
Images folder.
location-based services are available.
1. From the Settings menu, select Location. The following
• Mini Player — Plays music files in My Music folder on a microSD
Memory Card.
options appear in the display:
• Alarm — Lets you set alarm clock.
• Location On — GPS location setting is on whenever you make or
• Top 5 Contacts — Launches the Favorites screen. Lets you
access your Contacts list and Contacts Groups as well.
receive a call, wherever the feature is available.
• 911 Only — GPS location setting is on only when you dial 911.
2. Select the desired Location setting. You’re returned to the
Settings menu.
• Sketchpad — Lets you draw images or handwrite text into a file.
• Voicemail — Checks your voicemail messages.
Changing Your Settings
106
• Calculator — Launches Calculator tool.
• Banner — Lets you create your own personalized greeting that
appears in the display when your phone is in standby mode.
• Calendar — Launches Calendar tool.
• Backlight — Lets you set backlight options for the LCDs, keypad,
and set the brightness.
• Help — Lets you access your Wireless Carrier’s on-line Help
service.
2. Select the desired sub-menu. The following sections
2. To enable/disable a particular widget, select the associated
option in the Widget screen. A check mark appears in/
disappears from the option’s check box.
describe the Display sub-menus in greater detail.
Main Menu Style
Main Menu Style allows you to choose how the main menu
appears in your display. You are shown a preview of your choice.
3. To enable/disable all available widgets, select Select All
/
Unselect All. A check mark appears in/disappears from all
1. From the Settings menu, select Display Settings
➔
Main
the options’ check boxes.
Menu Style. The following options appear in the display:
4. To save your new settings, select OK. You are returned to
• Grid — Display the main menu as a 3x4 grid of icons.
• List — Display the main menu in a list format.
2. Select the desired menu format.
the Settings menu.
Display Settings
Using the Display menu, you can set the menu style, set the
standby mode animation, customize the backlight settings, and
more.
3. Touch the OK soft key to save your selection and return to
the Display Settings menu.
1. From the Settings menu, select Display Settings. The
following options appear in the display:
• Main Menu Style — Lets you choose whether the Main Menu
appears as a matrix of icons or as a list of menus.
• Wallpaper — Lets you choose the picture(s) that display(s) on your
phone when in standby mode.
107
Wallpaper
To set an image without
previewing it, touch the radio
button to the right of a
preferred picture or image. A
blue dot appears in the radio
button.
Wallpaper lets you choose the
pictures that appear in your phone’s
displays while in standby mode.
1. From the Settings menu,
select Display Settings
➔
Wallpaper. A scrollable list of
thumbnail images appears in
the display.
3. To save your choice, touch
the Set soft key.
•
If you selected a “Preloaded”
image, you are returned to the
Display Settings menu.
2. To preview an image, select
the image. An expanded view
appears in the display.
•
If you selected a photo taken with
your phone’s camera or a downloaded image, the Set as
Wallpaper pop-up appears showing the following options:
– Or –
–
–
Fit to Screen — Resizes the selected image to fit the phone’s display.
Rotate & Center — Rotates the selected image clockwise 90o and
centers it on the screen.
–
Center image — Places the center of the selected image at the center
of the phone’s display.
Select the preferred option. Your selected image is prepared and saved
as the new Wallpaper. You are returned to the menu.
Changing Your Settings
108
Banner
Backlight
➔
Backlight Time. The following options appear
in the display:
Create your own personalized greeting that appears in the
display while your phone is in standby mode.
• 7 Seconds
• 15 Seconds
• 30 Seconds
1. From the Settings menu, select Display Settings
➔
Banner.
The Banner screen appears in the display.
• Always On (this setting uses much more power than the timed
2. Select the Banner field and enter a word or short phrase (up to
12 characters) to appear in your phone’s display while in standby
page 52.)
settings)
• Always Dim
2. Select the desired Backlight Time setting.
Brightness
3. Select the preferred Display setting: On (banner displays),
Brightness lets you adjust the brightness of the backlight.
1. From the Settings menu, select Display Settings
Backlight Brightness. The Brightness screen appears
in the display.
Off (banner does not display).
➔
4. Press the Save soft key to save the new banner and return
➔
to the Display Settings menu.
Backlight
Backlight Time
2. To adjust the backlight brightness, touch, hold, and slide
the Level button left or right.
You can set the backlight for your display to remain on or off or to
remain on for a specified period of time.
3. To save your new setting, touch the Save soft key.
Note: Prolonged backlight use drains your battery faster.
1. From the Settings menu, select Display Settings
109
➔
The Volume screen appears
in the display showing the
following options:
Sounds Settings
The Sounds Settings menu provides
a variety of options to customize
audio properties for such things as
ringers, keypad tones alerts, and
more.
• Master Volume — Controls the
loudness of all phone sounds.
• Messages Volume — Controls
the loudness of the ringtone
played for incoming messages.
Volume
Volume lets you adjust the loudness
of the sounds your phone produces.
• Touch Volume — Controls the
loudness of the feedback tone
played when the screen is
touched.
1. From the Settings menu,
select Sounds Settings
Volume
➔
2. Select the volume option you
want to change. The associated Volume screen appears in
the display.
.
3. Select the preferred Volume setting:
•
•
•
•
•
Low
•
•
•
•
Low/Medium
Medium/High
Silence all
Medium
High
Alarm only
1 beep
Vibrate only
Changing Your Settings
110
4. To preview your new setting, touch the Play soft key. To
• Pic/Video Message — Lets you select which ringtone or sound file
plays when you receive a Picture Message or Video Message.
end the preview, touch the Stop soft key.
• Voicemail — Lets you select which ringtone or sound file plays
when you receive a Voicemail message.
5. To retain your setting, touch the Set soft key. Your are
returned to the Volume screen.
• Roaming Ringtone — Lets you select which ringtone or sound file
plays when you leave your home network.
6. To save your new settings and return to the Sound Settings
2. Select the desired option. A
related, scrollable ringtones
list appears in the display.
menu, touch the OK soft key.
Ringer Type
You can assign ringer types and
melody tones for calls, alarms, and
other alerts, in the Ringer Type sub-
menu.
3. To assign a ringtone to the
selected option, select a
ringtone in the list.
1. From the Settings menu,
4. To assign a sound file to the
select Sounds Settings
➔
selected option:
Ringer Type. The following
•
•
•
Touch the down arrow in the
upper right corner of the screen.
options appear in the display:
Select Sounds. A sound files list
appears in the display.
• Voice Calls — Lets you select
which ringtone, sound file, and/
or one of a set of ringtones and/
or sound files plays when you
receive a voice call.
Select the preferred sound or record a new sound by touching the
• Text Message — Lets you select which ringtone or sound file plays
when you receive a Text Message.
5. To retain your selection and return to the Ringer Type
screen, touch the Set soft key.
111
6. To save your new ringer settings and return to the Sound
Key Tone
Settings menu, touch the OK soft key.
Key Tone lets you select the volume and the length of the DTMF
tones that the phone sends when dialing.
Alerts
1. From the Settings menu, select Sounds Settings
➔
Key
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, as well as
other options.
Tone. The following options appear in the display:
• Tone Level — Lets you set the volume for the key tones (Silence
all, Low, Low/Medium, Medium, Medium/High, High).
1. From the Settings menu, select Sounds Settings
➔
Alerts.
• Tone Length — Lets you set the length of the key tones (Short,
Long).
The following Alerts options appear in the display:
• Minute Beep — Sounds an alert ten seconds before each elapsed
2. To save your new setting and return to the Key Tone menu,
minute of a call.
touch the OK soft key.
• Roaming — Sounds an alert when you leave your home service
area during a call.
Vibrating Alert
• Call Connect — When you make a call, an alert sounds when the
call is answered.
Vibrating Alert lets you set your phone to vibrate in sync with
ringtones and melodies your phone plays.
• Power On — Plays a melody when the phone is being turned on.
• Power Off — Plays a melody when the phone is being turned off.
2. Select the desired Alert option setting (On or Off).
1. From the Settings menu, select Sounds Settings
Vibrating Alert
2. Select On or Off
➔
.
.
3. To save your new alert settings and return to the Sound
3. To save your new setting and return to the Sound Settings
Settings menu, touch the OK soft key.
menu, touch the OK soft key.
Changing Your Settings
112
• Name Repeat — Phone repeats displaying Contact name or caller
Call Settings
Call Answer
ID.
2. Select the desired call alerting method and touch the OK
You can select a specific answer mode when you receive an
incoming call.
soft key to save your selection.
Auto Answer
1. From the Settings menu, select Call Settings
Answer
The following call answer settings appear in the display:
➔
Call
.
With Auto Answer enabled, your phone automatically answers
calls after a period of time that you select.
1. From the Settings menu, select Call Settings
➔
Auto
• Any Key — Touch any key except the
or Left soft key to
Answer. The following settings appear in the display:
answer an incoming call.
• Off — Disables automatic answering of calls
• Send Key — Press
to answer an incoming call.
• After 1 Second — Phone automatically answers calls after 1
Tip: You can set your phone to answer calls automatically, without any input
second
• After 3 Seconds — Phone automatically answers calls after 3
seconds
2. Select the desired call answering method and touch the OK
• After 5 Seconds — Phone automatically answers calls after 5
seconds
soft key to save your selection.
Call Alert
2. Select the desired call automatic answering setting and
1. From the Settings menu, select Call Settings
➔
Call Alert.
touch the OK soft key to save your selection.
The following Call Alert settings appear in the display:
Speed Dial
• Ring Only — Phone rings for an incoming call.
Speed Dial lets you disable the speed dialing function, except for
• Caller ID + Ring — Phone rings and the display shows caller ID for
an incoming call.
113
1. From the Settings menu, select Call Settings
➔
Speed
TTY Mode
Dial.
Your phone is fully compatible with TTY equipment used by those
who are hearing impaired. TTY equipment is connected to your
phone through the headset connector on the top of the phone.
TTY Mode must be enabled before you can use your phone with a
TTY device.
• On — Enables the speed dial keys.
• Off — Disables the speed dial keys.
2. Select the desired setting and touch the OK soft key to
save your selection.
1. From the Settings menu, select Call Settings
➔
TTY Mode.
Auto Retry
You are prompted to confirm you want to change the
current TTY Mode setting.
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory
Performance.” message pops up when you select TTY Mode
.
1. From the Settings menu, select Call Settings
➔
Auto
2. To access the TTY Mode settings, touch the Yes soft key. To
Retry. The following settings appear in the display:
return to the Call Settings sub-menu, touch the No soft key.
• Off — Disables automatic re-dialing of numbers
• Every 10 Seconds — Phone automatically re-dials a number
3. If you touch the Yes soft key, the following settings appear
every 10 seconds
in the display:
• Every 30 Seconds — Phone automatically re-dials a number
every 30 seconds
• TTY Full — Enables TTY mode and disables microphone and
earpiece.
• Every 60 Seconds — Phone automatically re-dials a number
every 60 seconds
• TTY+Talk (VCO) — Enables TTY mode and microphone.
• TTY+Hear (HCO) — Enables TTY mode and earpiece.
• TTY Off — Disables TTY mode.
2. Select the desired setting and touch the OK soft key to
save your selection.
Changing Your Settings
114
4. Select the desired TTY Mode setting and touch the OK soft
• Data Until Powered Off — Data calls only, no voice calls accepted,
until you power the phone off and on again.
key to save your selection.
2. Select the desired data call connection setting and touch
Note: The TTY icon (
) appears in the top of the display when the phone is
the OK soft key to save your selection.
in standby mode.
Phone Settings
Airplane Mode
Voice Privacy
Voice Privacy when enabled (that is, set to Enhanced), turns on
When set to On, Airplane Mode disables all radio functions of your
phone. This prevents you from receiving or making calls (except
emergency calls), but allows you to use other features (such as
the camera and the Tools) safely in sensitive environments, such
as on board an aircraft.
advanced voice encryption.
1. From the Settings menu, select Call Settings
➔
Voice
Privacy. The following settings appear in the display:
• Standard — Voice privacy is disabled
• Enhanced — Voice privacy is enabled
1. From the Settings menu, select Phone Settings
➔
Airplane Mode.The following settings appear in the display:
2. Select the desired Voice Privacy setting and touch the OK
soft key to save your selection.
• On — Disables the radio transmitter and receiver in your phone
• Off — Enables the radio transmitter and receiver in your phone
2. Select the desired Airplane Mode setting and touch the OK
soft key to save your selection.
Data Settings
Use the Data Settings menu to configure data connection
settings.
Language
1. From the Settings menu, select Call Settings
➔
Data
Settings. The following settings appear in the display:
The language option on your phone can change the language of
voice prompts, menus, and key-input.
• Data Off — No incoming data calls accepted.
1. From the Settings menu, select Phone Settings
➔
• Data For Next Call — Wait for data call for the next 10 minutes.
115
Language. The following settings appear in the display:
Auto Keypad Lock
• English
Auto Keypad Lock lets you set your phone to automatically lock
all keys (except the Power On/Off-LOCK key) when the Backlight
time expires.
• Español
2. Select the desired Language setting and touch the OK soft
key to save your selection.
Tip: If you set Backlight to Always On or Always Dim, Auto Keypad Lock is
disabled. You can manually lock the touch screen and all keys by
Vibration Feedback
pressing the Power On/Off-LOCK key (
) at the top of the phone.
When set to On, Vibration Feedback causes your phone to vibrate
as well as play a tone when you touch a key, button, or field on
the phone to assure you that your screen touch is recognized.
1. From the Settings menu, select Phone Settings
Keypad Lock
2. Select On or Off
➔
Auto
.
1. From the Settings menu, select Phone Settings
➔
.
Vibration Feedback.The following options appear in the
3. To save your new setting and return to the Phone Settings
display:
menu, touch the OK soft key.
• Activation
Security
–
–
On — Enables vibration feedback.
Use the Security menu to lock your phone, set up emergency
numbers, set restrictions, as well as other security options.
Off — Disables vibration feedback.
• Vibration intensity — Push and slide left and right (
1
–
5).
Lock Phone
2. Select the desired Vibration Feedback settings and touch
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
the Save soft key to save your selection.
Changing Your Settings
116
Change Lock Code
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
1. From the Settings menu, select Phone Settings
➔
Security. You’re prompted to enter the lock code.
1. From the Settings menu, select Phone Settings
➔
Note: The default lock code is the last four digits of your telephone number.
Security. You’re prompted to enter the lock code.
2. Select the lock code field, enter the lock code, and touch
Note: The default lock code is the last four digits of your telephone number.
the OK soft key.
2. Select the lock code field, enter the lock code, and touch
3. Select Lock Phone. The following phone Lock mode
the OK soft key.
settings appear in the display:
3. Select Change Lock Code. You’re prompted to enter the
• Lock — Locks the phone immediately (The phone stays locked
until you enter the lock code.)
new lock code.
• Unlock — Unlocks the phone.
4. Enter the new lock code and touch the OK soft key. You’re
• On Power Up — The phone locks automatically the next time your
phone is powered ON (The phone stays locked until you enter the
lock code.)
prompted to re-enter the new lock code for verification.
5. Enter the new lock code again and touch the OK soft key.
4. Select the desired phone Lock mode setting and touch the
Your new Lock Code is stored.
OK soft key to save your selection.
Note: Your phone does not allow you to view the Lock Code for obvious
security reasons. If you change the Lock Code, be sure to write down
or memorize the new code.
Tip: You can manually lock your phone by pressing
117
Emergency #
Note: The default lock code is the last four digits of your telephone number.
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
2. Select the lock code field, enter the lock code, and touch
the OK soft key.
3. Select Emergency #
.
4. Select from the three emergency number entries.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
5. Enter an emergency number (up to 32 digits in length),
then touch the Done soft key to save the number that you
entered.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Call Emergency Numbers in Lock Mode
1. In standby mode, enter the emergency number.
2. Press
to place the call.
Reset Phone
Important!: DO NOT depend on this phone as a primary method of calling
Reset Phone returns all Settings to their factory default values.
1. From the Settings menu, select Phone Settings
911 or for any other essential or emergency communications.
➔
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
Security. You’re prompted to enter the lock code.
Store Emergency Numbers
Note: The default lock code is the last four digits of your telephone number.
1. From the Settings menu, select Phone Settings
➔
2. Select the lock code field, enter the lock code, and touch
Security. You’re prompted to enter the lock code.
the OK soft key.
Changing Your Settings
118
3. Select Reset Phone. You are prompted to confirm that you
want to restore default settings (except for the Contacts
and Voice Dial).
4. To erase all entries, touch Yes. To keep the current entries
and return to the Security sub-menu, touch No
.
Restrictions
4. To return to the Security sub-menu without resetting the
Restrictions lets you restrict the use of your phone for outgoing
calls, incoming calls, and calls placed from your Contacts.
phone, touch No. To restore default settings, touch Yes
.
1. From the Settings menu, select Phone Settings
➔
Erase All Contacts
Security. You’re prompted to enter the lock code.
Erase memory erases your Contacts and Group information
(except Default). This feature is useful if you want to give your
phone to someone else.
Note: The default lock code is the last four digits of your telephone number.
1. From the Settings menu, select Phone Settings
➔
2. Select the lock code field, enter the lock code, and touch
Security. You’re prompted to enter the lock code.
the OK soft key.
3. Select Restrictions. The following options appear in the
Note: The default lock code is the last four digits of your telephone number.
display:
2. Select the lock code field, enter the lock code, and touch
• Outgoing Calls — When set to Allow None, restricts the phone
from originating calls.
the OK soft key.
• Incoming Calls — When set to Allow None, restricts the phone
3. Select Erase All Contacts. You are prompted to confirm
from receiving calls.
erasure of all Contacts entries.
4. Select the desired Call Restriction. The following options
appear in the display:
Note: This procedure does not delete your Photo Gallery. The Photo Gallery
needs to be deleted separately.
• Allow All — Allows all calls.
• Allow None — Restricts all calls.
119
• Allow Contacts — Allows only Contacts.
The following roaming options appear in the display:
5. Select the preferred setting.
• Home Only — Roaming is off. If your home system is not available
then your calls will not be connected, and the No Service icon
6. To save your new setting, touch the OK soft key.
(
) appears in the display. In some service areas, an operator
may come on-line and ask you how you would prefer to pay for a
call.
NAM Selection
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
• Automatic — Roaming is on. This option will always try to connect
your calls using a digital service in the Preferred Roaming List (PRL)
loaded into your phone. If a preferred service is not found, then this
option will attempt to acquire any digital service.
1. From the Settings menu, select Phone Settings
➔
NAM
2. Select the preferred roaming option, then touch the OK soft
Selection. The following options appear in the display:
key.
• NAM1 — Your service contract has one phone line.
• NAM2 — Your service contract has two phone lines.
2. Select the desired NAM setting. The phone powers itself
off and back on.
Set Time
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
System Select
With Airplane Mode set to On, this function is enabled. In digital service
The System Select menu allows you to select the roaming setting
for your phone.
1. From the Settings menu, select Phone Settings
Select
➔
System
1. From the Settings menu, select Phone Settings
➔
Set
.
Time. The following options appear in the display:
• Set Date
• Set Time
Changing Your Settings
120
2. Select the desired option.
Calibration
•
For Set Date, the Set Date screen appears in the display.
Calibration lets you adjust the screen ability to correctly locate
your touch.
–
–
Use the up and down arrow buttons to select the current date.
Touch the OK soft key to save your date setting.
1. From the Settings menu, select Phone Settings
➔
•
For Set Time, the Set Time screen appears in the display.
Calibration. The Calibration screen appears in the display.
–
–
Use the up and down arrow buttons to select the current time.
2. To begin calibration of the screen, touch the OK soft key. A
Touch the OK soft key to save your time setting.
series of five crosses appear in the screen.
Touch Sensitivity
3. To calibrate the screen, touch the center of each cross in
Touch Sensitivity lets you adjust how much pressure you must
apply to the screen for the phone to react.
turn.
1. From the Settings menu, select Phone Settings
➔
Touch
Important!: For this calibration process to succeed, it is recommended that
you use a stylus to accurately set the new touch points.
Sensitivity. The Touch Sensitivity screen appears in the
display.
PC Connection
2. Touch, hold, and slide the Touch Sensitivity button left or
PC Connection lets you select how your phone responds to being
connected to personal computer using an optional USB Data
Cable.
right to adjust the screen’s responsiveness to your touch (
1
–
5).
1. From the Settings menu, select Phone Settings
➔
PC
3. Test your setting by applying pressure to the Touch Here
Connection. The following PC Connection options appear in
button until it responds.
the display:
4. If desired, repeat steps 2 and 3 until the Touch Sensitivity
• USB Mass Storage — Allows you to manage files on an optional
microSD Memory Card in your phone, just as you would files on a
setting is acceptable.
5. To save your new setting, touch the Save soft key.
121
Phone Memory Usage
Phone Memory Usage lets you review your usage of your phone’s
memory.
• USB Modem — Allows you to manage files over a USB modem
connection.
1. From the Settings menu, select Memory Manager
➔
2. Select the desired setting, and touch the OK soft key to
Phone Memory Usage. The Phone Memory Usage screen
save it and return to the Phone Settings screen.
appears in the display showing the following information:
Memory Manager
Memory Manager lets you quickly and easily review and manage
your phone memory usage. To access Memory Manager, do the
following:
• Total Used memory usage
• Available unused memory
• Images memory usage
• Videos memory usage
ᮣ
From the Settings menu, select Memory Manager. The
• Ringtones memory usage
• Sounds memory usage
following options appear in the display:
• Phone Memory Usage — Lets you review your phone’s used and
available memory.
• Applications memory usage
• Pic/Video Msg memory usage
2. Touch the OK soft key to return to the Memory Manager
menu.
• Card Memory Usage — Lets you review a removable Memory
Card’s used and available memory.
• Save Options — Lets you specify whether your images and videos
will be stored in your phone or on an optional Memory Card.
Card Memory Usage
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
Card Memory Usage lets you review your usage of your Memory
Card.
• Card Memory — Lets you review a removable Memory Card’s
available memory, manage your files stored there, and format new
Memory Cards.
1. From the Settings menu, select Memory Manager
➔
Card
Memory Usage. The Card Memory Usage screen appears in
Changing Your Settings 122
the display showing the following information:
• Card — Saves the selected type of files in a removable microSD
memory card.
• Total Used memory usage
• Available unused memory
• Images memory usage
3. Select the preferred storage location for the desired file
type, then touch the Save soft key. You are returned to the
Memory Manager menu.
• Videos memory usage
Phone Memory
• Ringtones memory usage
• Music memory usage
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
2. Touch the OK soft key to return to the Memory Manager
menu.
1. From the Settings menu, select Memory Manager
➔
Save Options
Phone Memory. The Phone screen appears in the display
Lets you specify where you want your images and videos stored.
To access Save Options, do the following:
listing files in the Images folder.
2. To select another folder, touch the down arrow button. The
1. From the Settings menu, select Memory Manager
Options
➔
Save
following options drop down:
.
• Images
The following file type options appear in the display:
• Videos
• Images
• Videos
• Ringtones
• Sounds
2. The following storage options appear in the display for
each file type:
3. Select the desired option. A list of all files in the related
folder appears in the display. Files are listed by name.
• Phone — Saves the selected type of files in your phone’s memory.
4. To erase files, do the following:
123
•
•
Touch the Erase soft key. The Select to erase screen appears in
• Images
the display.
• Videos
Select the check box for a file you want to erase to mark the file for
erasure. (Touch the Select All check box to mark all files for
erasure.)
• Ringtones
• Music
3. Select the desired option. A list of all files in the related
folder appears in the display.
•
Touch the Erase soft key.
5. To move files to the Memory Card, do the following:
Files are listed by name, and each file entry shows the
name of each file.
•
Touch the Move soft key. The Select to move screen appears in
the display.
•
Select the check box for a file you want to move to mark the file for
removal to the Memory Card. (Touch the Select All check box to
mark all files for removal.)
4. To erase files, do the following:
•
Touch the Erase soft key. The Select to erase screen appears in
the display.
•
Touch the Move soft key.
•
Select the check box for a file you want to erase to mark the file for
erasure. (Touch the Select All check box to mark all files for
erasure.)
6. Press
to return to the Memory Manager menu.
Card Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
•
Touch the Erase soft key.
5. To move files to Phone Memory, do the following:
•
Touch the Move soft key. The Select to move screen appears in
the display.
1. From the Settings menu, select Memory Manager
➔
Card
Memory. The Card screen appears in the display listing files
•
Select the check box for a file you want to move to mark the file for
removal to Phone Memory. (Touch the Select All check box to mark
all files for removal.)
in the Images folder.
2. Touch the down arrow button. The following options drop
•
Touch the Move soft key.
down:
Changing Your Settings
124
6. Press
to return to the Memory Manager menu.
Formatting a Memory Card
Formatting a microSD Memory Card erases any data currently on
the card and creates multimedia directories compatible with your
phone.
Caution!: Do not repeatedly format a Memory Card. This shortens its service
life.
To format a Memory Card, do the following:
1. From the Settings menu, select Memory Manager
➔
Card
Memory. The Card screen appears in the display.
2. Touch the Format soft key. You are prompted to confirm
formatting of the Memory Card.
3. To format the Memory Card, touch Yes. To return to the
Card screen without formatting the Memory Card, touch
No.
125
Section 13: Camera-Camcorder
Use your Samsung phone to take full color digital pictures and
videos, display them on your phone’s vivid color display, and
instantly share them with family and friends. It’s fun, and as easy
to use as a traditional point-and-click camera or camcorder. This
section explains how you can do the following:
•
•
•
Take pictures and videos with your phone’s built-in digital camera-
camcorder.
Send and receive pictures and videos taken with your phone’s camera-
camcorder.
Set the several options associated with the camera-camcorder that
help you take crisp, clear pictures and videos.
Note: You can also activate the camera by touching the Menu soft key, then
select Multimedia
➔
Camera.
Taking Pictures and Videos
Taking pictures videos with the built-in camera-camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
2. Using the display as a viewfinder, point the camera at your
subject.
3. When the image that you wish to capture appears in the
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
display, press the Camera key (
4. Touch one of the following buttons:
• Save — to save the picture to memory.
).
1. In standby mode, press and hold the Camera key (
)
• Send — to send the picture in a message.
on the right side of the phone. The camera view finder
• Erase —to erase the photo.
screen appears in the display. (For more information, refer
Camera-Camcorder
126
• Set as Wallpaper — to use this photo as wallpaper.
5. To exit the Camera feature, press
• Single — Take one photo with each press of the Camera button.
• Multi — Lets you take a series of 3 or 5 photos.
• Mosaic — Lets you take a mosaic of 4 or 9 photos.
• Frame — Lets you select a frame to surround your photos.
3. When you select the Multi option, the following options
appear in the display:
.
Tip: You can change a number of the camera’s settings to suit particular
Taking Multi Shot Pictures
• 3
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
• 5
When you select Mosaic, the following options appear in
the display:
• 4
• 9
4. Select the desired number of shots.
1. In standby mode, press and hold the Camera key (
)
The Multi progress bar (
) or the Mosaic icon (
or
on the right side of the phone. The camera view finder
or
)
screen appears in the display. (For more information, refer
(which acts as a progress bar while pictures are being
taken) appears in the display.
Note: You can also activate the camera by touching the Menu soft key, then
select Multimedia
➔
Camera.
5. Using the display as a viewfinder, point the camera lens at
your subject, and press the Camera key. The camera takes
one picture (Single) or multiple pictures in quick
succession (Multi or Mosaic).
2. Touch the Shooting Mode button ( ). The following
options appear in the display:
127
6. To save the picture(s) to memory, touch the Save button.
4. Touch one of the following buttons:
• Save — to save the video to memory.
• Send — to send the video in a message.
• Erase —to erase the video.
To discard the pictures, touch the Erase button. You are
prompted to confirm the erasure.
Taking Videos
Screen Layouts
Camera Screen
To take a video using the current camcorder settings, do the
following:
1. In Camera mode, touch the Mode button (
). The
camcorder view finder screen appears in the display. (For
Note: You can also activate the camcorder from standby mode by touching
the Menu soft key, then selecting Multimedia
➔
Camcorder
.
2. Using the display as a viewfinder, point the camera lens at
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter. The center of the display shows a viewfinder
image of the subject at which the camera is pointed.
your subject.
3. Press the Camera key when the image that you wish to
capture appears in the display. Recording continues until
one of the following occurs:
Camera Screen Buttons
•
•
•
You touch Stop
(
).
Changes the Camera-Camcorder mode to Camcorder.
Available memory is used up (Normal setting).
15 seconds of video have been recorded (Video Msg setting).
Camera-Camcorder
128
White Balance — Indicates camera’s white balance
setting. (You can change the camera white balance
Lets you set the Camera’s Shooting Mode to Single
,
Multi Mosaic, or Frame
,
.
Lets you set the resolution of your photos between
2Megapixels – 1.3Mmegapixels. 0.8Megapisels,
Quality — Indicates camera’s picture quality setting.
[You can change the picture quality setting. (For more
0.3Megapisels, 0.1Megapixels, and Picture ID
.
Lets you select values for Quality
,
ISO, White Balance,
Photo Limit — Indicates the available number of photos
you can take. (Depending on the camera resolution
setting.)
and Effects
.
Lets you set Night Shot OFF or ON
.
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
Lets you set a time delay before the Camera takes a
picture.
Brightness — Brightens or darkens the image
from 4 to +4.
Lets you set the Camera to brighten or darken your
photos.
Shooting Mode (Mosaic) — Takes multiple pictures
manually when you press the Camera key (
number of pictures taken depends upon the Mosaic
setting.
). The
Lets you access the Images folder.
Camera Screen Icons
Shooting Mode (Multi) — Takes multiple
pictures when you press the Camera key
ISO — Indicates camera exposure index setting.
(
). The number of pictures taken
depends upon the Multi setting.
129
Self Timer in use — Delays the camera shutter from 3 to
10 seconds after you press the Camera key ( ).
Lets you set the Camcorder’s Recording Mode to Normal
or Video Msg
.
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Lets you set the resolution of your videos between
320x240 and 176x144
.
Lets you select values for Quality
,
White Balance, and
Camcorder Screen
Effects
.
Not supported by Camcorder.
Lets you set a time delay before the Camcorder records
a video.
Lets you set the Camcorder to brighten or darken your
videos.
When you activate your phone’s camcorder, the first line of the
display is shows current camcorder setting icons. The center of
the display shows a viewfinder image of the subject at which the
camcorder is pointed.
Lets you access the Videos folder.
Camcorder Screen Icons
Camcorder Screen Buttons
White Balance — Indicates the camcorder’s white
balance setting. (You can change the camcorder white
Changes the Camera-Camcorder mode to Camera.
Camera-Camcorder
130
Quality — Indicates camcorder’s video quality setting. (You
can change the video quality setting. For more information,
On your phone, a picture is stored in the Images folder. A video is
stored in the Videos folder. These folders are part of the phone’s
memory and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
Phone Memory — Indicates videos will be stored in the
phone’s memory.
•
•
Send the picture or video to someone else by touching the Send
button.
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Memory Available — Indicates the percentage of
memory available for you to store a video.
Discard the picture or video by touching the Erase soft key.
Battery Level — Number black bars indicates level of
charge. When the battery is low, an empty battery icon
flashes and the phone sounds an alert, which indicates
your phone is about to shut down.
Camera Options
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
Brightness — Brightens or darkens the image
from 4 to +4.
View Mode
S
elf Timer in use — Delays the camcorder from
recording for from 3 to 10 seconds after you press the
Camera key ( ).
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
ᮣ
In camera mode with the status icon bar and camera
buttons showing, touch the center of the display the
following number of times:
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
• First press — Icons disappear except for photo/memory counter
and battery level.
•
Save the picture or video by touching the Save button.
• Second press — Camera buttons disappear.
131
• Third press — Icons and camera buttons reappear.
• Single — 1 picture taken when your press the Camera key (
).
Zoom
• Multi — Off / 3 pictures taken in succession / 5 pictures taken in
succession.
Zoom lets you temporarily enlarge the pictures you take, unless
your Size setting is 2.0m. Increasing the Zoom (2 – 9) enlarges
your pictures or videos (1 is normal).
• Mosaic — Off / 4 of the same new picture in a 2-by-2 array / 9 of
the same new picture in a 3-by-3 array.
• Frame — Lets you select a frame for enclosing each new photo.
2. Select the desired option and setting. The related icon
appears in the display.
Note: Zoom is not available if the Size option is set to 2.0m
.
ᮣ
In camera or camcorder viewfinder screen, use the Up and
Note: When the Shooting Mode option is set to a value other than Single
,
Down Volume keys to adjust the Zoom (the screen image
enlarges to show the affects of your changes).
either a Multi shot progress bar (
) or a Mosaic shot icon
(
) appears in the viewfinder screen.
The next time you press the Camera key (
), the camera
When you press the Camera key (
), the camera takes
takes an enlarged picture according to your selected Zoom
setting.
several pictures in rapid succession (Multi and Mosaic).
Size
Mode
Change the size (in bytes) of your pictures using the Size setting.
Switches the Camera to Camcorder mode. The Camcorder view
finder screen appears in the display.
1. In camera mode, touch
. The following options pop-
up:
Shooting Mode
• 2Megapixels (1600x1200 pixels)
• 1.3Megapixels (1280x960 pixels)
• 0.8Megapixels (1024x768 pixels)
• 0.3Megapixels (640 X 480 pixels)
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
).
1. In camera mode, touch
. The following options
display:
Camera-Camcorder
132
• 0.1Megapixels (320x240 pixels)
• Off
• Picture ID — lets you take pictures the correct size and resolution
• 3 seconds
for Contacts list picture IDs.
• 5 seconds
2. Select the desired option. You’re returned to the camera
• 10 seconds
viewfinder screen.
2. Select the desired Self Timer option. If you select
3,
5, or
10, the Self Timer icon appears in the camera screen in the
Note: The Size setting affects zoom capabilities. When Size is set to 2M
(1600 X 1200), zoom is not available. When Size is set to any value
lower than 2.0M (1600 X 1200), zoom settings 1 – 9 are available.
display.
When you press the Camera key (
), the countdown
Night Shot
timer indicates the time remaining before the camera
takes the picture.
Night Shot lets you take pictures in low light conditions.
1. In camera mode, touch
. The following options
Tip: To stop the countdown timer without resetting it, press
.
appear in the display:
• Off
• On
Brightness
Brightness lets you temporarily lighten the pictures you take.
Increasing the Brightness (-4 – +4) lightens your pictures (0 is
normal).
2. Select the Night Shot setting of your choice. You’re
returned to the camera viewfinder screen.
1. In camera mode, touch
. The Brightness adjustment
Self Timer
appears in the display.
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
1. In camera mode, touch
. The following options
pop-up:
133
2. To brighten your next picture(s), touch
. To darken your
ISO
next picture(s), touch . (The screen image lightens or
ISO lets you set your camera’s exposure index.
darkens to show the affects of your changes).
The next time you press the Camera key (
1. In camera mode, touch (
), then select Camera Tab ➔
ISO. The options are:
), the
camera takes a lighter or darker picture according to your
selected Brightness setting.
• Auto
• 100
• 200
• 400
Camera Settings — Camera Tab
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
2. Select the ISO setting of your choice. You’re returned to the
camera viewfinder screen.
Quality
White Balance
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with resolution).
White Balance allows you to adjust video quality according to
available light.
1. In camera mode, touch (
), then select Camera Tab ➔
Quality. The following options appear in the display:
• High
• Normal
• Economy
2. Select the quality setting of your choice. You’re returned to
the camera viewfinder screen.
Camera-Camcorder
134
1. In camera mode, touch (
), then select Camera Tab ➔
Effects
White Balance. The name of the current White Balance
setting appears in the second line of the display. The
options are:
Change the look of your pictures with Effects. Choose from six
available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
• Auto — The camera automatically adjusts color balance to
available light.
1. In camera mode, touch (
), then select Camera Tab ➔
Effects. The following options pop-up:
• Daylight — Use this setting when taking photos in full sun.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
Note: Choose Normal to disable Color Effects.
• Tungsten — Use this setting when taking photos under
• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
• Aqua — Subjects and pictures appear in an aqua hue.
incandescent lights.
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Touch the various White Balances to highlight them and to
show the effects they have on a photo.
3. When you have highlighted the White Balance you wish to
use, touch the OK button. The camera viewfinder screen
appears in the display with your selected White Balance
applied.
2. Select the color effect of your choice, then touch the OK
button. You’re returned to the camera viewfinder screen.
When you take your next picture, the phone’s display
previews your subject image with the selected color effect.
The next time you press the Camera key (
), the
camera applies the selected White Balance to your photo.
135
Exposure metering
1. In camera mode, touch (
• Card Memory — Stores pictures on an optional microSD Memory
Card.
), then select Camera Tab ➔
2. Select the memory location setting of your choice, then
touch the OK button. You’re returned to the camera
viewfinder screen.
Exposure metering. The following options appear in the
display:
• Normal — Adjusts exposure to the average light level over a large
picture area.
Auto Save
• Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
1. In camera mode, touch (
), then select Common Tab ➔
Auto Save. The following options appear in the display:
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
• Off
• On
2. Select the Metering setting of your choice, then touch the
OK button. You’re returned to the camera viewfinder
screen.
2. Select the automatic save setting of your choice, then
touch the OK button. You’re returned to the camera
viewfinder screen.
When you take your next picture, the phone’s display
Guideline
previews your subject image with the measured exposure.
Shows a cross hatch pattern in the view finder screen.
Camera Settings — Common Tab
Default storage
1. In camera mode, touch (
), then select Common Tab ➔
Guideline. The following options appear in the display:
1. In camera mode, touch (
), then select Common Tab ➔
• Off
• On
Default storage. The following storage options appear in
the display:
• Phone Memory — Stores pictures in phone memory.
Camera-Camcorder
136
2. Select the Guideline setting of your choice, then touch the
OK button. You’re returned to the camera viewfinder
screen.
View Mode
View Mode lets you quickly add or remove elements of the
Camcorder viewfinder screen.
ᮣ
In camcorder mode with the status icon bar and
camcorder buttons showing, touch the center of the
display the following number of times:
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds acts as an
audible reminder that your camera has taken a picture.
• First press — Icons disappear except for memory counter and
battery level.
1. In camera mode, touch (
), then select Common Tab ➔
• Second press — Camcorder buttons disappear.
Shutter Sound. The following shutter sounds appear in the
• Third press — Icons and camcorder buttons reappear.
display:
Zoom
• Off
Zoom lets you temporarily enlarge the videos you take.
Increasing the Zoom (2 – 9) enlarges your videos (1 is normal).
• Shutter
• OK
ᮣ
In camcorder mode, use the Up and Down Volume keys to
adjust the Zoom (the screen image enlarges to show the
affects of your changes).
• Melody
2. Select the shutter sound setting of your choice, then touch
the OK button. You’re returned to the camera viewfinder
screen.
The next time you press the Camera key (
), the camera
takes an enlarged picture according to your selected Zoom
setting.
Camcorder Options
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
137
Mode
Self Timer
Switches the Camcorder to Camera mode. The Camera view
finder screen appears in the display.
Self Timer lets you delay taking a video long enough to let you
join others in the video.
1. In camcorder mode, touch the Self Timer button. The
Recording Mode
following options appear in the display:
1. In camcorder mode, touch the Recording Mode button. The
following options appear in the display:
• Off
• 3 seconds
• Normal — Record videos that are any length up, depending on
available memory.
• 5 seconds
• Video Msg — Record videos that are a maximum of 15 seconds
• 10 seconds
long. The videos can be included in video messages.
2. Select the desired delay. The camcorder viewfinder screen
appears in the display.
2. Select the desired recording mode setting. The camcorder
viewfinder screen appears in the display.
The next time you the Camera key (
), a countdown
Size
timer in the display indicates the time remaining before the
camcorder starts recording the video.
Change the size (in bytes) of your videos by changing the video
resolution setting.
Tip: To stop the countdown timer without resetting it, press
.
1. In camcorder mode, touch the Size button. The size is fixed
at 176x144 (pixels) when the Recording Mode is set to
Video Msg. When the Recording Mode is set to Normal, the
size can be set to 320x240 pixels) or 176x144 (pixels).
Brightness
Brightness lets you temporarily lighten the videos you take.
Increasing the Brightness (-4 – +4) lightens your videos (0 is
normal).
1. In camcorder mode, touch
. The Brightness
Camera-Camcorder
138
adjustment appears in the display.
2. Select the quality setting of your choice, then touch the OK
button. You’re returned to the camcorder viewfinder
screen.
2. To brighten your next video(s), touch
. To darken your
next video(s), touch
. (The screen image lightens or
Note: The Quality is affected by the Recording Mode setting. When Recording
Mode is set to Video Msg, the Quality setting is locked at Economy
.
darkens to show the affects of your changes).
The next time you press the Camera key (
), the
White Balance
camcorder records a lighter or darker video according to
your selected Brightness setting.
White Balance allows you to adjust video quality according to
available light.
Settings — Camcorder Tab
1. In camcorder mode, touch the Settings button, then select
Camcorder Tab ➔ White Balance
.
Quality
You can affect how much your video is compressed, thereby
reducing it’s overall size (not to be confused with the Size
setting).
The options are:
• Auto — The camcorder automatically adjusts color balance to
available light.
1. In camcorder mode, touch the Settings button, then select
Camcorder Tab ➔ Quality. The following options appear
in the display:
• Daylight — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
• High
incandescent lights.
• Normal
• Economy
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
139
2. Select the White Balance you wish to use, then touch the
OK button. The camcorder viewfinder screen appears in
the display with your selected White Balance applied.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice, then touch the OK
button. You’re returned to the camcorder viewfinder
screen.
The next time you press the Camera key (
), the
When you record your next video, the phone’s display
previews your subject image with the selected color effect.
camcorder applies the selected White Balance to your
video.
Camcorder Settings — Common Tab
Effects
Default storage
Change the look of your videos with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1. In camcorder mode, touch the Settings button, then select
Common Tab ➔ Default storage. The following Memory
options appear in the display:
1. In camcorder mode, touch the Settings button, then select
Camcorder Tab ➔ Effects. The following options appear
in the display.
• Phone Memory — Stores videos in phone memory.
• Card Memory — Stores videos on an optional microSD Memory
Card.
2. Select the memory location setting of your choice, then
touch the OK button. You’re returned to the camcorder
viewfinder screen.
Note: Choose Normal to disable Color Effects.
• Normal — Subjects and pictures appear with a normal hue.
• Green — Subjects and pictures appear in a greenish hue.
• Negative — Subjects and pictures appear in inverted colors.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• B & W — Subjects and pictures appear in black and white.
Auto Save
1. In camcorder mode, touch the Settings button, then select
Common Tab ➔ Auto Save. The following options appear
Camera-Camcorder
140
in the display:
End Sound
• Off
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
• On
2. Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
1. In camcorder mode, touch the Settings button, then select
Common Tab ➔ End Sound. The following Memory
options appear in the display:
Start Sound
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
• Off
• Beep
• OK
1. In camcorder mode, touch the Settings button, then select
Common Tab ➔ Start Sound. The following Memory
options appear in the display:
• Melody
2. Select the desired end sound, then touch the OK button.
You’re returned to the camcorder viewfinder screen.
• Off
The Photo Gallery
• Beep
Saved pictures are stored in the My Images folder. You can
browse the pictures one at a time (expanded mode), or view
several pictures at once in thumbnail format.
• Look here
• 1,2,3!
2. Select the desired start sound, then touch the OK button.
You’re returned to the camcorder viewfinder screen.
1. In the Camera viewfinder screen, touch the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.
141
2. Touch and slide to browse pictures in the gallery.
• Copy to card/phone— Allows you to save a copy of the selected
picture to the phone or to a memory card.
3. To send the currently displayed or highlighted picture as a
• Rename — Rename the displayed picture.
Picture message, touch the Send soft key.
• Lock/Unlock — Prevent/allow erasure of one or more images.
Note: Locked pictures must be unlocked before you can erase
them.
4. To set the selected photo as wallpaper, touch the Set as
soft key.
• Print — Print one or more images on a Bluetooth-compatible
printer.
5. To change the viewing mode touch one of the following
buttons:
• Slide Show — Displays the pictures in the gallery in a slide show.
• Image Info — name, date, time, resolution and size.
7. To view an image, select it. While viewing an image, you
have the following options:
• Zoom—Zoom lets you temporarily enlarge the pictures you take,
unless your Size setting is 2.0m. Increasing the Zoom (2 – 9)
enlarges your pictures or videos (1 is normal).
• CANVAS— Lets you overlay a selected image with drawing(s) or
handwriting, then save the new postcard and send it in a Picture
•
•
•
•
•
To magnify the image, touch
To create a Postcard, touch
.
.
To expand the image to fill the display, touch
.
• Full screen—Expands the current image to fill the display.
6. For more options, touch the More soft key. The following
additional options pop-up:
To send the image in a Picture message, touch the Send soft key.
To assign the image as the standby screen Wallpaper or as a
Picture ID for someone in your Contacts list, touch the Set As soft
key.
• Camera — Launches the camera.
•
To access more options, touch the More soft key. The following
additional options pop-up:
• Erase — Erases the selected unlocked picture. Locked pictures
must be unlocked before you can erase them.
–
–
Camera — Launches the camera.
• Move to card/phone — Allows you to move the selected picture
from the phone to a memory card or from a memory card to the
phone.
Erase — Erases the picture.
Camera-Camcorder
142
–
–
Move to card /phone— Allows you to move the picture from the
phone to a memory card or from a memory card to the phone.
Touch the More soft key, then select CANVAS, select the
desired picture, and touch the CANVAS soft key.
Copy to card /phone — Allows you to save a copy of the picture to
the phone or to a memory card.
You are prompted to save your postcard as an Image (JPG)
–
–
Rename — Allows you to rename to picture.
file or as a Flash (SWF) file.
Lock/Unlock — Prevent/allow erasure of one or more images.
Note: Locked pictures must be unlocked before you can erase them.
3. Select the desired file format. The CANVAS screen appears
in the display.
–
–
–
Print — Print one or more images on a Bluetooth-compatible printer.
Slide Show — Show the pictures as a full screen slide show.
Image Info — View the Name, Date, Time, Resolution and Size of the
currently highlighted or displayed picture.
8. Select the desired option to perform its function or to enter
its sub-menu.
Creating and Sending Postcard Messages
Postcard lets you quickly send photos overlaid with handwritten
messages as Picture messages, rather than using the keypad to
enter your message. You can also include a sound file and
keypad-entered text.
4. Use the following tools to add handwritten text or graphics
to your CANVAS:
Lets you select the Pen or the Stamp as your
drawing tool.
1. In the Camera viewfinder screen, touch the Gallery button.
Any pictures that you’ve saved are listed with their
thumbnail images in the display.
Lets you select the color for art or writing using
the Pen drawing tool.
2. Select the desired picture, then touch the CANVAS button.
– Or –
143
Point, Click, and Send Pictures and Videos
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
Lets you select the pattern for the Stamp drawing
tool.
Lets you select the line thickness for art or writing
using the Pen drawing tool.
1. In standby mode, press and hold the Camera key (
) on
the right side of the phone. The camera view finder screen
appears in the display.
Lets you remove selected or all stamps from your
postcard image.
2. If desired, touch the Mode button. The camcorder view
finder screen appears in the display.
Lets you undo the previous line or letter made
with the Pen or the previous stamp image made
using the Stamp.
3. Using the display as a viewfinder, take the desired picture
or record the desired video by pressing the Camera key
(
), and then touching the Stop button (
) to stop
Lets you save your changes to your Postcard
image.
video recording.
The photo/video review screen appears in the display.
5. Touch
to save your changes.
4. For a video clip, touch the Save button. The camcorder
view finder screen appears in the display. Next, touch the
Gallery button; then, if desired, select the new video clip.
6. Touch the Send soft key, then select Picture Message. The
Picture Msg screen appears in the display.
7. Address, compose, and send your Postcard as a Picture
5. Touch the Send button. With a video clip, a menu pops-up
offering you the following options:
–
Video Message: Select Video Message. The Video Msg screen
appears in the display with the To list showing.
–
To Online Album: Send your video to online album.
Camera-Camcorder
144
–
Via Bluetooth: Send your video via Bluetooth.
6. Enter the recipient’s phone number or e-mail address
using the keypad.
7. Touch the Done soft key to save the address(es).
8. Touch the Next soft key. Select other message fields as
9. When you are finished composing your message, touch
Send soft key to send the Picture or Video message to the
intended recipient(s).
145
Section 14: Music Player
Music Player lets you play music (MP3) files stored on a
microSD™ Memory Card (up to 8 GB).
Music Player Controls
1. Music Library button
This section describes your phone’s Music Player functions and
key features associated with multimedia.
Launches the
Music Library
menu.
AccessingtheMusicPlayer
Note: A microSD™ Memory Card must be
installed for the Music Player to
2. Selection Information
area — Shows album
cover image, selection
title/file name, artist, and
album name, if available.
ᮣ
In standby mode, touch the
Menu soft key, then select
Music Player. The Music
Player screen appears in the
display.
3. Equalization and
Repetition controls — Set the equalization (Normal
,
Rock
,
Jazz, or Classic – only active when you use a headset),
repetition, and shuffle.
4. Progress bar — Indicates progress of playback.
Music Player
146
5. Elapsed Time and Total Time — Show how many hours,
minutes, and seconds of the music file have been played
and shows how long the music file is in hours, minutes,
and seconds.
Browsing for a Music File to Play
To select a music file to play:
1. From the Music Player screen,
touch the Music Library button
(
) in the upper left
6. Playback controls
corner of the screen.
Adjusts playback volume.
The Music Library screen
appears in the display listing
the following options:
Changes playback to previous music file in
playback list.
• Now Playing List — Lists all
music files you have selected to
play.
Starts/resumes music file playback.
Pauses music file playback.
• All Tracks — Lists all music files stored in the My Music folder on
a microSD Memory Card by their file names.
Changes playback to next music file in playback
list.
• Playlists — Lists any music file Playlist(s) you have created.
• Artists — Lists all available recording artists names with music
files stored on a Memory Card.
Music Player Soft Keys
• Albums — Lists all available album titles for music files stored on a
•
Details — Launches the Details screen which shows Title, Artists,
Albums, Genre, File Name, Encoding Format, Bitrate, Duration, File
Size, and Date for the music file currently playing.
Memory Card.
2. Select what music file group you wish to access. A list of
music files appears in the display.
•
Back — Closes the Music Player screen, and returns you to the Main
menu.
147
3. To play a music file, select the file. The Music Player screen
3. Enter the first few characters of the file, Playlist, artist, or
album you wish to find, depending upon which Library
appears in the display and the selected file begins playing.
4. To add a file to a Playlist, touch the Add Songs soft key. The
Add Songs screen appears in the display.
4. Touch the Done soft key. A list of the files, Playlists, artists,
or albums with names that match your text entry appears
in the search screen.
•
Touch a music file to add to a Playlist. A check mark appears in the
check box for that file.
•
•
Touch the Save soft key. The Playlists screen appears in the display.
Select the Playlist to receive the selected music files. The selected
playlist opens to show the added files.
5. Select the file you wish to play. The Music Player screen
appears in the display and the selected file begins playing.
•
Touch the Save soft key. The Playlists screen appears in the display.
6. Touch the Library button and select All Tracks from the
Searchingfor aMusicFiletoPlay
1. From the Music Player screen,
touch the Library button
drop-down list.
7. To add a file to a Playlist, touch the Add to Playlist soft key.
(
) in the upper left
The Add to Playlist screen appears in the display.
corner of the screen, then
select a Library option (such
as All Tracks).
•
Select a music file to add to a Playlist. A check mark appears in the
check box for that file.
•
•
Touch the Save soft key. The Playlists screen appears in the display.
Select the Playlist to receive the selected music files. You are
returned to the All Tracks list.
2. Select the <Tap here to find>
field. The 3x4 Keypad screen
appears in the display.
Music Player
148
Creating a Playlist
The Create Playlist screen
appears in the display.
1. From the Music Player screen, touch the Music Library
button (
) in the upper left corner of the screen.
4. Enter a name for your new
The Library screen appears in the display listing the
following options:
• Now Playing List — Lists all music files you have selected to play.
• All Tracks — Lists all music files stored in the My Music folder on
5. Touch the Save soft key. The
Playlists screen appears in the
display containing your new
playlist.
a microSD Memory Card by their file names.
• Playlists — Lists any music file
Playlist(s) you have created.
• Artists — Lists all available
recording artists names with
music files stored on a Memory
Card.
6. Touch the down arrow button in
the upper right corner of the
screen, then select a Library
option to select music to add to
your new Playlist.
• Albums — Lists all available
album titles for music files stored
on a Memory Card.
2. Select Playlist. The Playlists
7. Touch the Add to Playlist soft
key. The Add to Playlist screen
appears in the display.
screen appears in the display.
3. Touch the Create soft key.
149
8. Select a music file to add to a Playlist. A check mark
appears in the check box for that file. Repeat this step as
needed.
•
To play the contents of your new
Playlist, touch the Play button
(
) to the right of your
Playlist’s name. The Music Player
screen appears in the display,
and the first selection in your
Playlist begins playing.
9. Touch the Save soft key. The
Add to Playlist screen shows a
list of available Playlists.
10. Select your new Playlist. You
are returned to the Library
option screen you chose
previously.
11. Touch the down arrow button
in the upper right corner of
the screen, then select
Playlists. A list of available
Playlists appears in the display.
•
•
To return to the Library menu, touch
To change the appearance of your Playlists list from a list format to
an icon-like format, touch
.
.
•
To view the contents of your new Playlist, select it. Your Playlist
screen appears in the display showing the newly added files.
Music Player
150
Section 15: Applications
A number of preloaded (or downloadable) applications are
available from your Wireless Carrier for your phone. The following
list names those applications that are available from the Main
Menu or Widget Bar:
ᮣ
In standby mode, touch the Menu soft key, then touch
RemoMail
.
Note: For more information about this feature, contact your Wireless Service
Provider.
•
•
•
RealtoneVIP
RemoMail
Facebook
Facebook
Facebook is a social networking website that allows you to create
profiles that contain photos, lists of personal interests, exchange
private or public messages, and join groups of friends.
RealtoneVIP
Realtone VIP is a BREW-based subscription service that allows
you to download the latest and hottest ringtones produced by
Sony BMG, Universal Music Group, Warner Music Group and EMI.
To access Facebook:
ᮣ
In standby mode, touch the Menu soft key, then touch
Facebook
ᮣ
In standby mode, touch the Menu soft key, then touch
RealtoneVIP
.
.
Note: For more information about this feature, contact your Wireless Service
Note: For more information about this feature, contact your Wireless Service
Provider.
Provider.
RemoMail
RemoMail is a BREW-based mobile phone application that allows
you to access e-mail on your mobile phone. With RemoMail you
can receive, reply, view, compose, send, and delete email. You
can also view your mail in the Inbox, Drafts folder, or Outbox.
151
Section 16: Video Player
This section outlines your phone’s Video Player functions and key
features.
3. To send a video as part of a video message, touch the Send
Your phone includes a Video Player capable of playing 3gs and
MP4 video files.
4. To delete one or more video clips from the My Videos
Launching the Video Player
folder, touch the Erase soft key.
To launch the Video Player:
1. In standby mode, touch the
Menu soft key, then select
5. To view the video in the largest size possible, touch the Full
Screen soft key.
Multimedia
➔
My Videos.
The Videos screen appears in
the display showing up to
seven thumbnail images from
your videos stored in your
phone or on an optional
Memory Card.
To return to Portrait mode, press
.
2. Select a video. The Video
6. For more Video Player options, touch the More soft key.
Player screen appears in the
The following options appear in the display:
display and the selected video begins playing.
• Camcorder — Lets you record a new video clip (3gs) using your
phone’s Camcorder function.
Video Player
152
• Moveto card — Lets you move a video clip to an optional Memory
4. With the Video Player in Portrait Mode, the following
Card.
playback control buttons are available:
• Copy to card — Lets you save a copy of a video clip to an optional
Memory Card.
Volume — Touch to activate the on-screen volume
controls.
• Rename — Lets you change the name of a video clip.
• Lock / Unlock — Lets you protect a video from being deleted.
• Video Info — Displays information about a video, such as the
Previous Rewind — Touch to begin playing the previous
/
video in the My Videos list. Touch and hold to rewind
playback of the current video to an earlier point.
video Name, creation Date and Time
,
Resolution, data Size, and
the Duration
.
Pause — Touch to temporarily halt playback of the video.
Video Player Controls
(Portrait Mode)
1. Video Library button
Play — Touch to begin or resume playback of the video.
Next FastForward—Touchtobeginplayingthenextvideo
in the My Videos list. Touch and hold to fast forward
playback of the current video to a later point.
/
Touch to launch
the My Videos list.
2. Video Screen — Shows
the video being played.
3. Progress Bar — Indicates
how much of the video
has played, and shows the
total length of the video.
153
Video Player Controls (Full Screen Mode)
Play—Touchtobeginorresumeplaybackofthevideo.
Next Fast Forward — Touch to begin playing the next
/
video in the My Videos list. Touch and hold to fast
forward playback of the current video to a later point.
Expand — Expands the video image to fill the Video
Player screen.
Retract — Reduces the video imagetoitsoriginal size.
1. Video Screen — Shows the video being played.
2. Progress Bar — Indicates how much of the video has
played and shows the total length of the video.
3. With the Video Player in Full Screen Mode, the following
playback controls are available:
Volume — Shows the current volume setting. Touch to
activate the on-screen volume controls.
Previous Rewind — Touch to begin playing the
/
previous video in the My Videos list. Touch and hold to
rewindplaybackofthecurrentvideotoanearlierpoint.
Pause — Touch to temporarily halt playback of the
video.
Video Player
154
Section 17: Phone Info
This section explains Phone Info options that let you identify the
hardware and software versions of your phone and let you
identify the phone number assigned to your phone.
Version
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
Phone Number
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your Wireless Provider.
1. From the Settings menu, select Phone Info ➔ Version.
Your phone’s hardware and software version information
appears in the display.
1. From the Settings menu, select Phone Info ➔
Phone Number. The phone number assigned by your
Wireless Provider appears in the display.
2. To return to the Phone Info menu, press
.
2. To return to the Phone Info menu, press
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1. From the Settings menu, select Phone Info ➔
Icon Glossary. A list shows of the icons that can appear on
the top line of the display.
2. To return to the Phone Info menu, press
.
155
Section 18: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
156
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
information.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
•
•
Head: 1.22 W/Kg.
Body-worn: 1.08 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
157
Do wireless phones pose a health hazard?
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
Health and Safety Information
158
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
159
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF).
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
Health and Safety Information
160
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
away from your body or use a wireless phone connected to a remote
antenna.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
161
was not based on scientific evidence that any health hazard
exists.
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
Do hands-free kits for wireless phones reduce risks from
exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Do wireless phone accessories that claim to shield the
head from RF radiation work?
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
Health and Safety Information
162
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/9/2008):
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
•
•
•
•
•
FCC RF Safety Program:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
163
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Health and Safety Information
164
"The wireless industry reminds you to use your phone safely when
driving."
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
You should follow some commonsense recommendations when
using any portable audio device:
Provided by the Cellular Telecommunications & Internet
Association.
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Responsible Listening
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
•
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
165
•
•
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
National Institute on Deafness and Other Communication
Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
Internet: http://www.nidcd.nih.gov/
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
Health and Safety Information
166
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
National Institute for Occupational Safety and Health
(NIOSH)
395 E Street, S.W.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Suite 9200
Patriots Plaza Building
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.cdc.gov
1-888-232-6348 TTY
UsingYourPhoneNearOtherElectronicDevices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov/niosh/topics/noise/
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
167
•
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
For more information see:
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
Health and Safety Information
168
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together. A sum of 5
is considered acceptable for normal use. A sum of 6 is
considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
Vehicles
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
169
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
Health and Safety Information
170
phone warranty if said accessories cause damage or a defect to
the phone.
FCC Notice and Cautions
FCC Notice
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Other Important Safety Information
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Quincy, Massachusetts
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
171
Maintaining Your Phone's Peak Performance
Product Performance
Getting the Most Out of Your Signal Reception
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information,
refer to the “Disabling Bluetooth or WLAN” section.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
Health and Safety Information
172
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Battery Standby and Talk Time
•
•
If left unused, a fully charged battery will discharge itself over time.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Battery Precautions
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
173
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
0 °C (32 °F).
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Health and Safety Information
174
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
175
Section 19: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
176
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
177
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
178
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
179
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
Warranty Information
180
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
181
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
©
2009 Samsung Telecommunications America. All rights
reserved.
Warranty Information
182
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
183
Index
Brew
Making a Call — Voice Dialing
Call Settings
A
Applications Shopping and
Downloading 73
Launching 73
Settings 73
Apps
Browser
Launching 76
Camcorder
Buying 74
Disabled 75
Expired 75
Options 137
C
Calculator 100
Camera
Removing 74
Restoring 75
Calendar 93
Call Functions
Making a Call — Contact
Dialing 21
Making a Call — Number Entry
Dialing 20
Making a Call — Speed Dialing
B
Battery
Charging 4
Removal 6
Options 131
Bluetooth
Settings 93
184
Camera Options
K
L
Card Memory
Formatting 125
Management 124
Contacts List
F
Language 115
Favorites
G
Getting Started
UnderstandingthisUserManual
M
Making a Call
Open 38
Converters 102
Creating and Sending New Messages
D
Melody Shuffle
Memory Card
Formatting 125
Installing 8
Removing 8
Menu Navigation
Display Settings
Backlight 109
Voicemail 7
H
Banner 109
Wallpaper 108
HAC 168
I
Image Shuffle
Message Folders
E
Inbox 67
Wallpaper 108
185
Outbox 68
Message Setting 71
Messaging
Message Settings 71
microSD
Phone
Picture Messages
Q
R
Roaming 33
Features 10
Modes 16
Formatting 125
Installing 8
Removing 8
Phone Info
Version 155
Phone Memory
Phone Settings
Mode
Camcorder 18
Camera 18
M-Ratings 168
Multimedia 79
N
P
S
Security Settings
Language 115
Photos
Sending 144
Personal Organizer
Restriction 119
186
Settings
T
Changing 55
U
Understanding Your Contacts
Editing an Existing Contact
Entry 44
Display 107
Phone 115
Security 116
Sound 110
Text Modes
Setup
Changing 55
Memory 51
Pauses 45
Location 106
Voicemail 69
Sound Settings
Alerts 112
Speed Dial
Tools
Bluetooth 90
Calculator 100
Calendar 93
Converter 102
V
Version 155
Voice Service
Assigning 47
Changing 48
Removing 49
Tools Menu
Accessing 86
T-Ratings 168
Commands 86
Settings 87
187
|